-
Annealing reduces Si$_3$N$_4$ microwave-frequency dielectric loss in superconducting resonators
Authors:
Sarang Mittal,
Kazemi Adachi,
Nicholas E. Frattini,
Maxwell D. Urmey,
Sheng-Xiang Lin,
Alec L. Emser,
Cyril Metzger,
Luca Talamo,
Sarah Dickson,
David Carlson,
Scott B. Papp,
Cindy A. Regal,
Konrad W. Lehnert
Abstract:
The dielectric loss of silicon nitride (Si$_3$N$_4$) limits the performance of microwave-frequency devices that rely on this material for sensing, signal processing, and quantum communication. Using superconducting resonant circuits, we measure the cryogenic loss tangent of either as-deposited or high-temperature annealed stoichiometric Si$_3$N$_4$ as a function of drive strength and temperature.…
▽ More
The dielectric loss of silicon nitride (Si$_3$N$_4$) limits the performance of microwave-frequency devices that rely on this material for sensing, signal processing, and quantum communication. Using superconducting resonant circuits, we measure the cryogenic loss tangent of either as-deposited or high-temperature annealed stoichiometric Si$_3$N$_4$ as a function of drive strength and temperature. The internal loss behavior of the electrical resonators is largely consistent with the standard tunneling model of two-level systems (TLS), including dam** caused by resonant energy exchange with TLS and by the relaxation of non-resonant TLS. We further supplement the TLS model with a self-heating effect to explain an increase in the loss observed in as-deposited films at large drive powers. Critically, we demonstrate that annealing remedies this anomalous power-induced loss, reduces the relaxation-type dam** by more than two orders of magnitude, and reduces the resonant-type dam** by a factor of three. Employing infrared absorption spectroscopy, we find that annealing reduces the concentration of hydrogen in the Si$_3$N$_4$, suggesting that hydrogen impurities cause substantial dissipation.
△ Less
Submitted 16 May, 2024; v1 submitted 20 December, 2023;
originally announced December 2023.
-
Quantum control of continuous systems via nonharmonic potential modulation
Authors:
Piotr T. Grochowski,
Hannes Pichler,
Cindy A. Regal,
Oriol Romero-Isart
Abstract:
We present a theoretical proposal for preparing and manipulating a state of a single continuous-variable degree of freedom confined to a nonharmonic potential. By utilizing optimally controlled modulation of the potential's position and depth, we demonstrate the generation of non-Gaussian states, including Fock, Gottesman-Kitaev-Preskill, multi-legged-cat, and cubic-phase states, as well as the im…
▽ More
We present a theoretical proposal for preparing and manipulating a state of a single continuous-variable degree of freedom confined to a nonharmonic potential. By utilizing optimally controlled modulation of the potential's position and depth, we demonstrate the generation of non-Gaussian states, including Fock, Gottesman-Kitaev-Preskill, multi-legged-cat, and cubic-phase states, as well as the implementation of arbitrary unitaries within a selected two-level subspace. Additionally, we propose protocols for single-shot orthogonal state discrimination, algorithmic cooling, and correcting for nonlinear evolution. We analyze the robustness of this control scheme against noise. Since all the presented protocols rely solely on the precise modulation of the effective nonharmonic potential landscape, they are relevant to several experiments with continuous-variable systems, including the motion of a single particle in an optical tweezer or lattice, or current in circuit quantum electrodynamics.
△ Less
Submitted 29 June, 2024; v1 submitted 28 November, 2023;
originally announced November 2023.
-
Time-of-Flight Quantum Tomography of Single Atom Motion
Authors:
M. O. Brown,
S. R. Muleady,
W. J. Dworschack,
R. J. Lewis-Swan,
A. M. Rey,
O. Romero-Isart,
C. A. Regal
Abstract:
Time of flight is an intuitive way to determine the velocity of particles and lies at the heart of many capabilities ranging from mass spectrometry to fluid flow measurements. Here we show time-of-flight imaging can realize tomography of a quantum state of motion of a single trapped atom. Tomography of motion requires studying the phase space spanned by both position and momentum. By combining tim…
▽ More
Time of flight is an intuitive way to determine the velocity of particles and lies at the heart of many capabilities ranging from mass spectrometry to fluid flow measurements. Here we show time-of-flight imaging can realize tomography of a quantum state of motion of a single trapped atom. Tomography of motion requires studying the phase space spanned by both position and momentum. By combining time-of-flight imaging with coherent evolution of the atom in an optical tweezer trap, we are able to access arbitrary quadratures in phase space without relying on coupling to a spin degree of freedom. To create non-classical motional states, we harness quantum tunneling in the versatile potential landscape of optical tweezers, and our tomography both demonstrates Wigner function negativity and assesses coherence of non-stationary states. Our demonstrated tomography concept has wide applicability to a range of particles and will enable characterization of non-classical states of more complex systems or massive dielectric particles.
△ Less
Submitted 7 April, 2022; v1 submitted 6 March, 2022;
originally announced March 2022.
-
Optomechanical ground-state cooling in a continuous and efficient electro-optic transducer
Authors:
Benjamin M. Brubaker,
Jonathan M. Kindem,
Maxwell D. Urmey,
Sarang Mittal,
Robert D. Delaney,
Peter S. Burns,
Michael R. Vissers,
Konrad W. Lehnert,
Cindy A. Regal
Abstract:
The demonstration of a quantum link between microwave and optical frequencies would be an important step towards the realization of a quantum network of superconducting processors. A major impediment to quantum electro-optic transduction in all platforms explored to date is noise added by thermal occupation of modes involved in the transduction process, and it has proved difficult to realize low t…
▽ More
The demonstration of a quantum link between microwave and optical frequencies would be an important step towards the realization of a quantum network of superconducting processors. A major impediment to quantum electro-optic transduction in all platforms explored to date is noise added by thermal occupation of modes involved in the transduction process, and it has proved difficult to realize low thermal occupancy concurrently with other desirable features like high duty cycle and high efficiency. In this work, we present an efficient and continuously operating electro-optomechanical transducer whose mechanical mode has been optically sideband-cooled to its quantum ground state. The transducer achieves a maximum efficiency of 47% and minimum input-referred added noise of 3.2 photons in upconversion. Moreover, the thermal occupancy of the transducer's microwave mode is minimally affected by continuous laser illumination with power more than two orders of magnitude greater than that required for optomechanical ground-state cooling.
△ Less
Submitted 26 December, 2021;
originally announced December 2021.
-
Optomechanics for quantum technologies
Authors:
Shabir Barzanjeh,
André Xuereb,
Simon Gröblacher,
Mauro Paternostro,
Cindy A Regal,
Eva Weig
Abstract:
The ability to control the motion of mechanical systems through its interaction with light has opened the door to a plethora of applications in fundamental and applied physics. With experiments routinely reaching the quantum regime, the focus has now turned towards creating and exploiting interesting non-classical states of motion and entanglement in optomechanical systems. Quantumness has also sh…
▽ More
The ability to control the motion of mechanical systems through its interaction with light has opened the door to a plethora of applications in fundamental and applied physics. With experiments routinely reaching the quantum regime, the focus has now turned towards creating and exploiting interesting non-classical states of motion and entanglement in optomechanical systems. Quantumness has also shifted from being the very reason why experiments are constructed to becoming a resource for the investigation of fundamental physics and the creation of quantum technologies. Here, by focusing on opto- and electromechanical platforms we review recent progress in quantum state preparation and entanglement of mechanical systems, together with applications to signal processing and transduction, quantum sensing, topological physics, as well as small-scale thermodynamics.
△ Less
Submitted 29 November, 2021;
originally announced November 2021.
-
Single atom trap** in a metasurface lens optical tweezer
Authors:
Ting-Wei Hsu,
Wenqi Zhu,
Tobias Thiele,
Mark O. Brown,
Scott B. Papp,
Amit Agrawal,
Cindy A. Regal
Abstract:
Optical metasurfaces of subwavelength pillars have provided new capabilities for the versatile definition of the amplitude, phase, and polarization of light. In this work, we demonstrate that an efficient dielectric metasurface lens can be used to trap and image single neutral atoms with a long working distance from the lens of 3 mm. We characterize the high-numerical-aperture optical tweezers usi…
▽ More
Optical metasurfaces of subwavelength pillars have provided new capabilities for the versatile definition of the amplitude, phase, and polarization of light. In this work, we demonstrate that an efficient dielectric metasurface lens can be used to trap and image single neutral atoms with a long working distance from the lens of 3 mm. We characterize the high-numerical-aperture optical tweezers using the trapped atoms and compare with numerical computations of the metasurface lens performance. We predict that future metasurfaces for atom trap** will be able to leverage multiple ongoing developments in metasurface design and enable multifunctional control in complex quantum information experiments with neutral-atoms arrays.
△ Less
Submitted 24 December, 2022; v1 submitted 21 October, 2021;
originally announced October 2021.
-
Non-destructive optical readout of a superconducting qubit
Authors:
Robert D. Delaney,
Maxwell D. Urmey,
Sarang Mittal,
Benjamin M. Brubaker,
Jonathan M. Kindem,
Peter S. Burns,
Cindy A. Regal,
Konrad W. Lehnert
Abstract:
Entangling superconducting quantum processors via light would enable new means of secure communication and distributed quantum computing. However, transducing quantum signals between these disparate regimes of the electromagnetic spectrum remains an outstanding goal, and interfacing superconducting qubits with electro-optic transducers presents significant challenges due to the deleterious effects…
▽ More
Entangling superconducting quantum processors via light would enable new means of secure communication and distributed quantum computing. However, transducing quantum signals between these disparate regimes of the electromagnetic spectrum remains an outstanding goal, and interfacing superconducting qubits with electro-optic transducers presents significant challenges due to the deleterious effects of optical photons on superconductors. Moreover, many remote entanglement protocols require multiple qubit gates both preceding and following the upconversion of the quantum state, and thus an ideal transducer should leave the state of the qubit unchanged: more precisely, the backaction from the transducer on the qubit should be minimal. Here we demonstrate non-destructive optical readout of a superconducting transmon qubit via a continuously operated electro-optic transducer. The modular nature of the transducer and circuit QED system used in this work enable complete isolation of the qubit from optical photons, and the backaction on the qubit from the transducer is less than that imparted by thermal radiation from the environment. Moderate improvements in transducer bandwidth and added noise will enable us to leverage the full suite of tools available in circuit QED to demonstrate transduction of non-classical signals from a superconducting qubit to the optical domain.
△ Less
Submitted 18 October, 2021;
originally announced October 2021.
-
Mechanical Quantum Sensing in the Search for Dark Matter
Authors:
Daniel Carney,
Gordan Krnjaic,
David C. Moore,
Cindy A. Regal,
Gadi Afek,
Sunil Bhave,
Benjamin Brubaker,
Thomas Corbitt,
Jonathan Cripe,
Nicole Crisosto,
Andrew Geraci,
Sohitri Ghosh,
Jack G. E. Harris,
Anson Hook,
Edward W. Kolb,
Jonathan Kunjummen,
Rafael F. Lang,
Tongcang Li,
Tongyan Lin,
Zhen Liu,
Joseph Lykken,
Lorenzo Magrini,
Jack Manley,
Nobuyuki Matsumoto,
Alissa Monte
, et al. (10 additional authors not shown)
Abstract:
Numerous astrophysical and cosmological observations are best explained by the existence of dark matter, a mass density which interacts only very weakly with visible, baryonic matter. Searching for the extremely weak signals produced by this dark matter strongly motivate the development of new, ultra-sensitive detector technologies. Paradigmatic advances in the control and readout of massive mecha…
▽ More
Numerous astrophysical and cosmological observations are best explained by the existence of dark matter, a mass density which interacts only very weakly with visible, baryonic matter. Searching for the extremely weak signals produced by this dark matter strongly motivate the development of new, ultra-sensitive detector technologies. Paradigmatic advances in the control and readout of massive mechanical systems, in both the classical and quantum regimes, have enabled unprecedented levels of sensitivity. In this white paper, we outline recent ideas in the potential use of a range of solid-state mechanical sensing technologies to aid in the search for dark matter in a number of energy scales and with a variety of coupling mechanisms.
△ Less
Submitted 13 August, 2020;
originally announced August 2020.
-
Grey-molasses optical-tweezer loading: Controlling collisions for scaling atom-array assembly
Authors:
M. O. Brown,
T. Thiele,
C. Kiehl,
T. -W. Hsu,
C. A. Regal
Abstract:
We show that with a purely blue-detuned cooling mechanism we can densely load single neutral atoms into large arrays of shallow optical tweezers. With this ability, more efficient assembly of larger ordered arrays will be possible - hence expanding the number of particles available for bottom-up quantum simulation and computation with atoms. Using Lambda-enhanced grey molasses on the D1 line of 87…
▽ More
We show that with a purely blue-detuned cooling mechanism we can densely load single neutral atoms into large arrays of shallow optical tweezers. With this ability, more efficient assembly of larger ordered arrays will be possible - hence expanding the number of particles available for bottom-up quantum simulation and computation with atoms. Using Lambda-enhanced grey molasses on the D1 line of 87Rb, we achieve loading into a single 0.63 mK trap with 89% probability, and we further extend this loading to 100 atoms at 80% probability. The loading behavior agrees with a model of consecutive light-assisted collisions in repulsive molecular states. With simple rearrangement that only moves rows and columns of a 2D array, we demonstrate one example of the power of enhanced loading in large arrays.
△ Less
Submitted 4 April, 2019; v1 submitted 4 November, 2018;
originally announced November 2018.
-
Self-calibrating vector atomic magnetometry through microwave polarization reconstruction
Authors:
Tobias Thiele,
Yiheng Lin,
Mark O. Brown,
Cindy A. Regal
Abstract:
Atomic magnetometry is one of the most sensitive ways to measure magnetic fields. We present a method for converting a naturally scalar atomic magnetometer into a vector magnetometer by exploiting the polarization dependence of hyperfine transitions in rubidium atoms. First, we fully determine the polarization ellipse of an applied microwave field using a self-calibrating method, i.e. a method in…
▽ More
Atomic magnetometry is one of the most sensitive ways to measure magnetic fields. We present a method for converting a naturally scalar atomic magnetometer into a vector magnetometer by exploiting the polarization dependence of hyperfine transitions in rubidium atoms. First, we fully determine the polarization ellipse of an applied microwave field using a self-calibrating method, i.e. a method in which the light-atom interaction provides everything required to know the field in an orthogonal laboratory frame. We then measure the direction of an applied static field using the polarization ellipse as a three-dimensional reference defined by Maxwell's equations. Although demonstrated with trapped atoms, this technique could be applied to atomic vapors, or a variety of atom-like systems.
△ Less
Submitted 10 July, 2018;
originally announced July 2018.
-
The Hong-Ou-Mandel effect with atoms
Authors:
A. M. Kaufman,
M. C. Tichy,
F. Mintert,
A. M. Rey,
C. A. Regal
Abstract:
Controlling light at the level of individual photons has led to advances in fields ranging from quantum information and precision sensing to fundamental tests of quantum mechanics. A central development that followed the advent of single photon sources was the observation of the Hong-Ou- Mandel (HOM) effect, a novel two-photon path interference phenomenon experienced by indistinguishable photons.…
▽ More
Controlling light at the level of individual photons has led to advances in fields ranging from quantum information and precision sensing to fundamental tests of quantum mechanics. A central development that followed the advent of single photon sources was the observation of the Hong-Ou- Mandel (HOM) effect, a novel two-photon path interference phenomenon experienced by indistinguishable photons. The effect is now a central technique in the field of quantum optics, harnessed for a variety of applications such as diagnosing single photon sources and creating probabilistic entanglement in linear quantum computing. Recently, several distinct experiments using atomic sources have realized the requisite control to observe and exploit Hong-Ou-Mandel interference of atoms. This article provides a summary of this phenomenon and discusses some of its implications for atomic systems. Transitioning from the domain of photons to atoms opens new perspectives on fundamental concepts, such as the classification of entanglement of identical particles. It aids in the design of novel probes of quantities such as entanglement entropy by combining well established tools of AMO physics - unity single-atom detection, tunable interactions, and scalability - with the Hong-Ou-Mandel interference. Furthermore, it is now possible for established protocols in the photon community, such as measurement-induced entanglement, to be employed in atomic experiments that possess deterministic single-particle production and detection. Hence, the realization of the HOM effect with atoms represents a productive union of central ideas in quantum control of atoms and photons.
△ Less
Submitted 17 August, 2018; v1 submitted 15 January, 2018;
originally announced January 2018.
-
Measurement-based entanglement of noninteracting bosonic atoms
Authors:
Brian J. Lester,
Yiheng Lin,
Mark O. Brown,
Adam M. Kaufman,
Randall J. Ball,
Emanuel Knill,
Ana M. Rey,
Cindy A. Regal
Abstract:
We demonstrate the ability to extract a spin-entangled state of two neutral atoms via postselection based on a measurement of their spatial configuration. Typically, entangled states of neutral atoms are engineered via atom-atom interactions. In contrast, in our work we use Hong-Ou-Mandel interference to postselect a spin-singlet state after overlap** two atoms in distinct spin states on an effe…
▽ More
We demonstrate the ability to extract a spin-entangled state of two neutral atoms via postselection based on a measurement of their spatial configuration. Typically, entangled states of neutral atoms are engineered via atom-atom interactions. In contrast, in our work we use Hong-Ou-Mandel interference to postselect a spin-singlet state after overlap** two atoms in distinct spin states on an effective beam splitter. We verify the presence of entanglement and determine a bound on the postselected fidelity of a spin-singlet state of $\left(0.62 \pm 0.03\right)$. The experiment has direct analogy to creating polarization entanglement with single photons and hence demonstrates the potential to use protocols developed for photons to create complex quantum states with noninteracting atoms.
△ Less
Submitted 11 May, 2018; v1 submitted 18 December, 2017;
originally announced December 2017.
-
Harnessing electro-optic correlations in an efficient mechanical converter
Authors:
A. P. Higginbotham,
P. S. Burns,
M. D. Urmey,
R. W. Peterson,
N. S. Kampel,
B. M. Brubaker,
G. Smith,
K. W. Lehnert,
C. A. Regal
Abstract:
An optical network of superconducting quantum bits (qubits) is an appealing platform for quantum communication and distributed quantum computing, but develo** a quantum-compatible link between the microwave and optical domains remains an outstanding challenge. Operating at $T < 100$ mK temperatures, as required for quantum electrical circuits, we demonstrate a mechanically-mediated microwave-opt…
▽ More
An optical network of superconducting quantum bits (qubits) is an appealing platform for quantum communication and distributed quantum computing, but develo** a quantum-compatible link between the microwave and optical domains remains an outstanding challenge. Operating at $T < 100$ mK temperatures, as required for quantum electrical circuits, we demonstrate a mechanically-mediated microwave-optical converter with 47$\%$ conversion efficiency, and use a feedforward protocol to reduce added noise to 38 photons. The feedforward protocol harnesses our discovery that noise emitted from the two converter output ports is strongly correlated because both outputs record thermal motion of the same mechanical mode. We also discuss a quantum feedforward protocol that, given high system efficiencies, allows quantum information to be transferred even when thermal phonons enter the mechanical element faster than the electro-optic conversion rate.
△ Less
Submitted 17 September, 2019; v1 submitted 18 December, 2017;
originally announced December 2017.
-
Population mixing due to dipole-dipole interactions in a 1D array of multilevel atoms
Authors:
Ewan Munro,
Ana Asenjo-Garcia,
Yiheng Lin,
Leong Chuan Kwek,
Cindy A. Regal,
Darrick E. Chang
Abstract:
We examine theoretically how dipole-dipole interactions arising from multiple photon scattering lead to a modified distribution of ground state populations in a driven, ordered 1D array of multilevel atoms. Specifically, we devise a level configuration in which a ground-state population accumulated due solely to dipole-dipole interactions can be up to 20\% in regimes accessible to current experime…
▽ More
We examine theoretically how dipole-dipole interactions arising from multiple photon scattering lead to a modified distribution of ground state populations in a driven, ordered 1D array of multilevel atoms. Specifically, we devise a level configuration in which a ground-state population accumulated due solely to dipole-dipole interactions can be up to 20\% in regimes accessible to current experiments with neutral atom arrays. For much larger systems, the steady state can consist of an equal distribution of population across the ground state manifold. Our results illustrate how dipole-dipole interactions can be accentuated through interference, and regulated by the geometry of ordered atom arrays. More generally, control techniques for multilevel atoms that can be degraded by multiple scattering, such as optical pum**, will benefit from an improved understanding and control of dipole-dipole interactions available in ordered arrays.
△ Less
Submitted 17 September, 2018; v1 submitted 6 December, 2017;
originally announced December 2017.
-
Reconfigurable re-entrant cavity for wireless coupling to an electro-optomechanical device
Authors:
Tim Menke,
Peter S. Burns,
Andrew P. Higginbotham,
Nir S. Kampel,
Robert W. Peterson,
Katarina Cicak,
Raymond W. Simmonds,
Cindy A. Regal,
Konrad W. Lehnert
Abstract:
An electro-optomechanical device capable of microwave-to-optics conversion has recently been demonstrated, with the vision of enabling optical networks of superconducting qubits. Here we present an improved converter design that uses a three-dimensional (3D) microwave cavity for coupling between the microwave transmission line and an integrated LC resonator on the converter chip. The new design si…
▽ More
An electro-optomechanical device capable of microwave-to-optics conversion has recently been demonstrated, with the vision of enabling optical networks of superconducting qubits. Here we present an improved converter design that uses a three-dimensional (3D) microwave cavity for coupling between the microwave transmission line and an integrated LC resonator on the converter chip. The new design simplifies the optical assembly and decouples it from the microwave part of the setup. Experimental demonstrations show that the modular device assembly allows us to flexibly tune the microwave coupling to the converter chip while maintaining small loss. We also find that electromechanical experiments are not impacted by the additional microwave cavity. Our design is compatible with a high-finesse optical cavity and will improve optical performance.
△ Less
Submitted 19 March, 2017;
originally announced March 2017.
-
Improving broadband displacement detection with quantum correlations
Authors:
N. S. Kampel,
R. W. Peterson,
R. Fischer,
P. -L. Yu,
K. Cicak,
R. W. Simmonds,
K. W. Lehnert,
C. A. Regal
Abstract:
Interferometers enable ultrasensitive measurement in a wide array of applications from gravitational wave searches to force microscopes. The role of quantum mechanics in the metrological limits of interferometers has a rich history, and a large number of techniques to surpass conventional limits have been proposed. In a typical measurement configuration, the tradeoff between the probe's shot noise…
▽ More
Interferometers enable ultrasensitive measurement in a wide array of applications from gravitational wave searches to force microscopes. The role of quantum mechanics in the metrological limits of interferometers has a rich history, and a large number of techniques to surpass conventional limits have been proposed. In a typical measurement configuration, the tradeoff between the probe's shot noise (imprecision) and its quantum backaction results in what is known as the standard quantum limit (SQL). In this work we investigate how quantum correlations accessed by modifying the readout of the interferometer can access physics beyond the SQL and improve displacement sensitivity. Specifically, we use an optical cavity to probe the motion of a silicon nitride membrane off mechanical resonance, as one would do in a broadband displacement or force measurement, and observe sensitivity better than the SQL dictates for our quantum efficiency. Our measurement illustrates the core idea behind a technique known as \textit{variational readout}, in which the optical readout quadrature is changed as a function of frequency to improve broadband displacement detection. And more generally our result is a salient example of how correlations can aid sensing in the presence of backaction.
△ Less
Submitted 7 March, 2017; v1 submitted 22 July, 2016;
originally announced July 2016.
-
Laser cooling of a micromechanical membrane to the quantum backaction limit
Authors:
R. W. Peterson,
T. P. Purdy,
N. S. Kampel,
R. W. Andrews,
P. -L. Yu,
K. W. Lehnert,
C. A. Regal
Abstract:
The radiation pressure of light can act to damp and cool the vibrational motion of a mechanical resonator. In understanding the quantum limits of this cooling, one must consider the effect of shot noise fluctuations on the final thermal occupation. In optomechanical sideband cooling in a cavity, the finite Stokes Raman scattering defined by the cavity linewidth combined with shot noise fluctuation…
▽ More
The radiation pressure of light can act to damp and cool the vibrational motion of a mechanical resonator. In understanding the quantum limits of this cooling, one must consider the effect of shot noise fluctuations on the final thermal occupation. In optomechanical sideband cooling in a cavity, the finite Stokes Raman scattering defined by the cavity linewidth combined with shot noise fluctuations dictates a quantum backaction limit, analogous to the Doppler limit of atomic laser cooling. In our work we sideband cool to the quantum backaction limit by using a micromechanical membrane precooled in a dilution refrigerator. Monitoring the optical sidebands allows us to directly observe the mechanical object come to thermal equilibrium with the optical bath.
△ Less
Submitted 13 October, 2015;
originally announced October 2015.
-
Entangling two transportable neutral atoms via local spin exchange
Authors:
A. M. Kaufman,
B. J. Lester,
M. Foss-Feig,
M. L. Wall,
A. M. Rey,
C. A. Regal
Abstract:
To advance quantum information science a constant pursuit is the search for physical systems that meet the stringent requirements for creating and preserving quantum entanglement. In atomic physics, robust two-qubit entanglement is typically achieved by strong, long-range interactions in the form of Coulomb interactions between ions or dipolar interactions between Rydberg atoms. While these intera…
▽ More
To advance quantum information science a constant pursuit is the search for physical systems that meet the stringent requirements for creating and preserving quantum entanglement. In atomic physics, robust two-qubit entanglement is typically achieved by strong, long-range interactions in the form of Coulomb interactions between ions or dipolar interactions between Rydberg atoms. While these interactions allow fast gates, atoms subject to these interactions must overcome the associated coupling to the environment and cross-talk among qubits. Local interactions, such as those requiring significant wavefunction overlap, can alleviate these detrimental effects yet present a new challenge: To distribute entanglement, qubits must be transported, merged for interaction, and then isolated for storage and subsequent operations. Here we show how, via a mobile optical tweezer, it is possible to prepare and locally entangle two ultracold neutral atoms, and then separate them while preserving their entanglement. While ground-state neutral atom experiments have measured dynamics consistent with spin entanglement, and detected entanglement with macroscopic observables, we are now able to demonstrate position-resolved two-particle coherence via application of a local gradient and parity measurements; this new entanglement-verification protocol could be applied to arbitrary spin-entangled states of spatially-separated atoms. The local entangling operation is achieved via ultracold spin-exchange interactions, and quantum tunneling is used to combine and separate atoms. Our toolset provides a framework for dynamically entangling remote qubits via local operations within a large-scale quantum register.
△ Less
Submitted 12 November, 2015; v1 submitted 20 July, 2015;
originally announced July 2015.
-
Optomechanical Raman-Ratio Thermometry
Authors:
T. P. Purdy,
P. -L. Yu,
N. S. Kampel,
R. W. Peterson,
K. Cicak,
R. W. Simmonds,
C. A. Regal
Abstract:
The temperature dependence of the asymmetry between Stokes and anti-Stokes Raman scattering can be exploited for self-calibrating, optically-based thermometry. In the context of cavity optomechanics, we observe the cavity-enhanced scattering of light interacting with the standing-wave drumhead modes of a silicon nitride membrane mechanical resonator. The ratio of the amplitude of Stokes to anti-St…
▽ More
The temperature dependence of the asymmetry between Stokes and anti-Stokes Raman scattering can be exploited for self-calibrating, optically-based thermometry. In the context of cavity optomechanics, we observe the cavity-enhanced scattering of light interacting with the standing-wave drumhead modes of a silicon nitride membrane mechanical resonator. The ratio of the amplitude of Stokes to anti-Stokes scattered light is used to measure temperatures of optically-cooled mechanical modes down to the level of a few vibrational quanta. We demonstrate that the Raman-ratio technique is able to measure the physical temperature of our device over a range extending from cryogenic temperatures to within an order of magnitude of room temperature.
△ Less
Submitted 27 June, 2014;
originally announced June 2014.
-
Raman cooling imaging: Detecting single atoms near their ground state of motion
Authors:
Brian J. Lester,
Adam M. Kaufman,
Cindy A. Regal
Abstract:
We demonstrate imaging of neutral atoms via the light scattered during continuous Raman sideband cooling. We detect single atoms trapped in optical tweezers while maintaining a significant motional ground-state fraction. The techniques presented provide a framework for single-atom resolved imaging of a broad class of atomic species.
We demonstrate imaging of neutral atoms via the light scattered during continuous Raman sideband cooling. We detect single atoms trapped in optical tweezers while maintaining a significant motional ground-state fraction. The techniques presented provide a framework for single-atom resolved imaging of a broad class of atomic species.
△ Less
Submitted 22 July, 2014; v1 submitted 23 May, 2014;
originally announced May 2014.
-
Tensile strained $In_{x}Ga_{1-x}P$ membranes for cavity optomechanics
Authors:
G. D. Cole,
P. -L. Yu,
C. Gärtner,
K. Siquans,
R. Moghadas Nia,
J. Schmöle,
J. Hoelscher-Obermaier,
T. P. Purdy,
W. Wieczorek,
C. A. Regal,
M. Aspelmeyer
Abstract:
We investigate the optomechanical properties of tensile-strained ternary InGaP nanomembranes grown on GaAs. This material system combines the benefits of highly strained membranes based on stoichiometric silicon nitride, with the unique properties of thin-film semiconductor single crystals, as previously demonstrated with suspended GaAs. Here we employ lattice mismatch in epitaxial growth to impar…
▽ More
We investigate the optomechanical properties of tensile-strained ternary InGaP nanomembranes grown on GaAs. This material system combines the benefits of highly strained membranes based on stoichiometric silicon nitride, with the unique properties of thin-film semiconductor single crystals, as previously demonstrated with suspended GaAs. Here we employ lattice mismatch in epitaxial growth to impart an intrinsic tensile strain to a monocrystalline thin film (approximately 30 nm thick). These structures exhibit mechanical quality factors of 2*10^6 or beyond at room temperature and 17 K for eigenfrequencies up to 1 MHz, yielding Q*f products of 2*10^12 Hz for a tensile stress of ~170 MPa. Incorporating such membranes in a high finesse Fabry-Perot cavity, we extract an upper limit to the total optical loss (including both absorption and scatter) of 40 ppm at 1064 nm and room temperature. Further reductions of the In content of this alloy will enable tensile stress levels of 1 GPa, with the potential for a significant increase in the Q*f product, assuming no deterioration in the mechanical loss at this composition and strain level. This materials system is a promising candidate for the integration of strained semiconductor membrane structures with low-loss semiconductor mirrors and for realizing stacks of membranes for enhanced optomechanical coupling.
△ Less
Submitted 31 March, 2014;
originally announced April 2014.
-
Bidirectional and efficient conversion between microwave and optical light
Authors:
R. W. Andrews,
R. W. Peterson,
T. P. Purdy,
K. Cicak,
R. W. Simmonds,
C. A. Regal,
K. W. Lehnert
Abstract:
Converting low-frequency electrical signals into much higher frequency optical signals has enabled modern communications networks to leverage both the strengths of microfabricated electrical circuits and optical fiber transmission, allowing information networks to grow in size and complexity. A microwave-to-optical converter in a quantum information network could provide similar gains by linking q…
▽ More
Converting low-frequency electrical signals into much higher frequency optical signals has enabled modern communications networks to leverage both the strengths of microfabricated electrical circuits and optical fiber transmission, allowing information networks to grow in size and complexity. A microwave-to-optical converter in a quantum information network could provide similar gains by linking quantum processors via low-loss optical fibers and enabling a large-scale quantum network. However, no current technology can convert low-frequency microwave signals into high-frequency optical signals while preserving their fragile quantum state. For this demanding application, a converter must provide a near-unitary transformation between different frequencies; that is, the ideal transformation is reversible, coherent, and lossless. Here we demonstrate a converter that reversibly, coherently, and efficiently links the microwave and optical portions of the electromagnetic spectrum. We use our converter to transfer classical signals between microwave and optical light with conversion efficiencies of ~10%, and achieve performance sufficient to transfer quantum states if the device were further precooled from its current 4 kelvin operating temperature to below 40 millikelvin. The converter uses a mechanically compliant membrane to interface optical light with superconducting microwave circuitry, and this unique combination of technologies may provide a way to link distant nodes of a quantum information network.
△ Less
Submitted 11 August, 2014; v1 submitted 19 October, 2013;
originally announced October 2013.
-
Strong Optomechanical Squeezing of Light
Authors:
T. P. Purdy,
P. -L. Yu,
R. W. Peterson,
N. S. Kampel,
C. A. Regal
Abstract:
We create squeezed light by exploiting the quantum nature of the mechanical interaction between laser light and a membrane mechanical resonator embedded in an optical cavity. The radiation pressure shot noise (fluctuating optical force from quantum laser amplitude noise) induces resonator motion well above that of thermally driven motion. This motion imprints a phase shift on the laser light, henc…
▽ More
We create squeezed light by exploiting the quantum nature of the mechanical interaction between laser light and a membrane mechanical resonator embedded in an optical cavity. The radiation pressure shot noise (fluctuating optical force from quantum laser amplitude noise) induces resonator motion well above that of thermally driven motion. This motion imprints a phase shift on the laser light, hence correlating the amplitude and phase noise, a consequence of which is optical squeezing. We experimentally demonstrate strong and continuous optomechanical squeezing of 1.7 +/- 0.2 dB below the shot noise level. The peak level of squeezing measured near the mechanical resonance is well described by a model whose parameters are independently calibrated and that includes thermal motion of the membrane with no other classical noise sources.
△ Less
Submitted 21 October, 2013; v1 submitted 5 June, 2013;
originally announced June 2013.
-
Mechanical resonators for storage and transfer of electrical and optical quantum states
Authors:
S. A. McGee,
D. Meiser,
C. A. Regal,
K. W. Lehnert,
M. J. Holland
Abstract:
We study an optomechanical system in which a microwave field and an optical field are coupled to a common mechanical resonator. We explore methods that use these mechanical resonators to store quantum mechanical states and to transduce states between the electromagnetic resonators from the perspective of the effect of mechanical decoherence. Besides being of fundamental interest, this coherent qua…
▽ More
We study an optomechanical system in which a microwave field and an optical field are coupled to a common mechanical resonator. We explore methods that use these mechanical resonators to store quantum mechanical states and to transduce states between the electromagnetic resonators from the perspective of the effect of mechanical decoherence. Besides being of fundamental interest, this coherent quantum state transfer could have important practical implications in the field of quantum information science, as it potentially allows one to overcome intrinsic limitations of both microwave and optical platforms. We discuss several state transfer protocols and study their transfer fidelity using a fully quantum mechanical model that utilizes quantum state-diffusion techniques. This work demonstrates that mechanical decoherence should not be an insurmountable obstacle in realizing high fidelity storage and transduction.
△ Less
Submitted 29 May, 2013;
originally announced May 2013.
-
Observation of Radiation Pressure Shot Noise on a Macroscopic Object
Authors:
T. P. Purdy,
R. W. Peterson,
C. A. Regal
Abstract:
The quantum mechanics of position measurement of a macroscopic object is typically inaccessible because of strong coupling to the environment and classical noise. Here we monitor a mechanical resonator subject to an increasingly strong continuous position measurement and observe a quantum mechanical backaction force that rises in accordance with the Heisenberg uncertainty limit. For our optically-…
▽ More
The quantum mechanics of position measurement of a macroscopic object is typically inaccessible because of strong coupling to the environment and classical noise. Here we monitor a mechanical resonator subject to an increasingly strong continuous position measurement and observe a quantum mechanical backaction force that rises in accordance with the Heisenberg uncertainty limit. For our optically-based position measurements, the backaction takes the form of a fluctuating radiation pressure from the Poisson-distributed photons in the coherent measurement field, termed radiation pressure shot noise. We demonstrate a backaction force that is comparable in magnitude to the thermal forces in our system. Additionally, we observe a temporal correlation between fluctuations in the radiation force and in the position of the resonator.
△ Less
Submitted 17 February, 2013; v1 submitted 27 September, 2012;
originally announced September 2012.
-
Cooling a single atom in an optical tweezer to its quantum ground state
Authors:
Adam M. Kaufman,
Brian J. Lester,
Cindy A. Regal
Abstract:
We report cooling of a single neutral atom to its three-dimensional vibrational ground state in an optical tweezer. After employing Raman sideband cooling for tens of milliseconds, we measure via sideband spectroscopy a three-dimensional ground-state occupation of ~90%. We further observe coherent control of the spin and motional state of the trapped atom. Our demonstration shows that an optical t…
▽ More
We report cooling of a single neutral atom to its three-dimensional vibrational ground state in an optical tweezer. After employing Raman sideband cooling for tens of milliseconds, we measure via sideband spectroscopy a three-dimensional ground-state occupation of ~90%. We further observe coherent control of the spin and motional state of the trapped atom. Our demonstration shows that an optical tweezer, formed simply by a tightly focused beam of light, creates sufficient confinement for efficient sideband cooling. This source of ground-state neutral atoms will be instrumental in numerous quantum simulation and logic applications that require a versatile platform for storing and manipulating ultracold single neutral atoms. For example, these results will improve current optical tweezer experiments studying atom-photon coupling and Rydberg quantum logic gates, and could provide new opportunities such as rapid production of single dipolar molecules or quantum simulation in tweezer arrays.
△ Less
Submitted 29 November, 2012; v1 submitted 10 September, 2012;
originally announced September 2012.
-
Cavity optomechanics with Si3N4 membranes at cryogenic temperatures
Authors:
T. P. Purdy,
R. W. Peterson,
P. -L. Yu,
C. A. Regal
Abstract:
We describe a cryogenic cavity-optomechanical system that combines Si3N4 membranes with a mechanically-rigid Fabry-Perot cavity. The extremely high quality-factor frequency products of the membranes allow us to cool a MHz mechanical mode to a phonon occupation of less than 10, starting at a bath temperature of 5 kelvin. We show that even at cold temperatures thermally-occupied mechanical modes of…
▽ More
We describe a cryogenic cavity-optomechanical system that combines Si3N4 membranes with a mechanically-rigid Fabry-Perot cavity. The extremely high quality-factor frequency products of the membranes allow us to cool a MHz mechanical mode to a phonon occupation of less than 10, starting at a bath temperature of 5 kelvin. We show that even at cold temperatures thermally-occupied mechanical modes of the cavity elements can be a limitation, and we discuss methods to reduce these effects sufficiently to achieve ground state cooling. This promising new platform should have versatile uses for hybrid devices and searches for radiation pressure shot noise.
△ Less
Submitted 31 August, 2012;
originally announced August 2012.
-
From Cavity Electromechanics to Cavity Optomechanics
Authors:
C. A. Regal,
K. W. Lehnert
Abstract:
We present an overview of experimental work to embed high-Q mesoscopic mechanical oscillators in microwave and optical cavities. Based upon recent progress, the prospect for a broad field of "cavity quantum mechanics" is very real. These systems introduce mesoscopic mechanical oscillators as a new quantum resource and also inherently couple their motion to photons throughout the electromagnetic sp…
▽ More
We present an overview of experimental work to embed high-Q mesoscopic mechanical oscillators in microwave and optical cavities. Based upon recent progress, the prospect for a broad field of "cavity quantum mechanics" is very real. These systems introduce mesoscopic mechanical oscillators as a new quantum resource and also inherently couple their motion to photons throughout the electromagnetic spectrum.
△ Less
Submitted 19 October, 2010;
originally announced October 2010.
-
Cavity optomechanics using an optically levitated nanosphere
Authors:
D. E. Chang,
C. A. Regal,
S. B. Papp,
D. J. Wilson,
J. Ye,
O. Painter,
H. J. Kimble,
P. Zoller
Abstract:
Recently, remarkable advances have been made in coupling a number of high-Q modes of nano-mechanical systems to high-finesse optical cavities, with the goal of reaching regimes where quantum behavior can be observed and leveraged toward new applications. To reach this regime, the coupling between these systems and their thermal environments must be minimized. Here we propose a novel approach to…
▽ More
Recently, remarkable advances have been made in coupling a number of high-Q modes of nano-mechanical systems to high-finesse optical cavities, with the goal of reaching regimes where quantum behavior can be observed and leveraged toward new applications. To reach this regime, the coupling between these systems and their thermal environments must be minimized. Here we propose a novel approach to this problem, in which optically levitating a nano-mechanical system can greatly reduce its thermal contact, while simultaneously eliminating dissipation arising from clam**. Through the long coherence times allowed, this approach potentially opens the door to ground-state cooling and coherent manipulation of a single mesoscopic mechanical system or entanglement generation between spatially separate systems, even in room temperature environments. As an example, we show that these goals should be achievable when the mechanical mode consists of the center-of-mass motion of a levitated nanosphere.
△ Less
Submitted 17 September, 2009; v1 submitted 8 September, 2009;
originally announced September 2009.
-
Cavity optomechanics with stoichiometric SiN films
Authors:
D. J. Wilson,
C. A. Regal,
S. B. Papp,
H. J. Kimble
Abstract:
We study high-stress SiN films for reaching the quantum regime with mesoscopic oscillators connected to a room-temperature thermal bath, for which there are stringent requirements on the oscillators' quality factors and frequencies. Our SiN films support mechanical modes with unprecedented products of mechanical quality factor $Q_m$ and frequency $ν_m$ reaching…
▽ More
We study high-stress SiN films for reaching the quantum regime with mesoscopic oscillators connected to a room-temperature thermal bath, for which there are stringent requirements on the oscillators' quality factors and frequencies. Our SiN films support mechanical modes with unprecedented products of mechanical quality factor $Q_m$ and frequency $ν_m$ reaching $Q_{m} ν_m \simeq2 \times 10^{13}$ Hz. The SiN membranes exhibit a low optical absorption characterized by Im$(n) \lesssim 10^{-5}$ at 935 nm, representing a 15 times reduction for SiN membranes. We have developed an apparatus to simultaneously cool the motion of multiple mechanical modes based on a short, high-finesse Fabry-Perot cavity and present initial cooling results along with future possibilities.
△ Less
Submitted 16 November, 2009; v1 submitted 5 September, 2009;
originally announced September 2009.
-
Efficient routing of single photons by one atom and a microtoroidal cavity
Authors:
Takao Aoki,
A. S. Parkins,
D. J. Alton,
C. A. Regal,
Barak Dayan,
E. Ostby,
K. J. Vahala,
H. J. Kimble
Abstract:
Single photons from a coherent input are efficiently redirected to a separate output by way of a fiber-coupled microtoroidal cavity interacting with individual Cesium atoms. By operating in an overcoupled regime for the input-output to a tapered fiber, our system functions as a quantum router with high efficiency for photon sorting. Single photons are reflected and excess photons transmitted, as…
▽ More
Single photons from a coherent input are efficiently redirected to a separate output by way of a fiber-coupled microtoroidal cavity interacting with individual Cesium atoms. By operating in an overcoupled regime for the input-output to a tapered fiber, our system functions as a quantum router with high efficiency for photon sorting. Single photons are reflected and excess photons transmitted, as confirmed by observations of photon antibunching (bunching) for the reflected (transmitted) light. Our photon router is robust against large variations of atomic position and input power, with the observed photon antibunching persisting for intracavity photon number 0.03 \lesssim n \lesssim 0.7.
△ Less
Submitted 7 January, 2009;
originally announced January 2009.
-
Dynamical Backaction of Microwave Fields on a Nanomechanical Oscillator
Authors:
J. D. Teufel,
J. W. Harlow,
C. A. Regal,
K. W. Lehnert
Abstract:
We measure the response and thermal motion of a high-Q nanomechanical oscillator coupled to a superconducting microwave cavity in the resolved-sideband regime where the oscillator's resonance frequency exceeds the cavity's linewidth. The coupling between the microwave field and mechanical motion is strong enough for radiation pressure to overwhelm the intrinsic mechanical dam**. This radiation…
▽ More
We measure the response and thermal motion of a high-Q nanomechanical oscillator coupled to a superconducting microwave cavity in the resolved-sideband regime where the oscillator's resonance frequency exceeds the cavity's linewidth. The coupling between the microwave field and mechanical motion is strong enough for radiation pressure to overwhelm the intrinsic mechanical dam**. This radiation-pressure dam** cools the fundamental mechanical mode by a factor of 5 below the thermal equilibrium temperature in a dilution refrigerator to a phonon occupancy of 140 quanta.
△ Less
Submitted 6 November, 2008; v1 submitted 23 July, 2008;
originally announced July 2008.
-
Measuring nanomechanical motion with a microwave cavity interferometer
Authors:
C. A. Regal,
J. D. Teufel,
K. W. Lehnert
Abstract:
In recent years microfabricated microwave cavities have been extremely successful in a wide variety of detector applications. In this article we focus this technology on the challenge of quantum-limited displacement detection of a macroscopic object. We measure the displacement of a nanomechanical beam by capacitively coupling its position to the resonant frequency of a superconducting transmiss…
▽ More
In recent years microfabricated microwave cavities have been extremely successful in a wide variety of detector applications. In this article we focus this technology on the challenge of quantum-limited displacement detection of a macroscopic object. We measure the displacement of a nanomechanical beam by capacitively coupling its position to the resonant frequency of a superconducting transmission-line microwave cavity. With our device we realize near state-of-the-art mechanical force sensitivity (3 $\rm{aN/\sqrt{Hz}}$) and thus add to only a handful of techniques able to measure thermomechanical motion at 10's of milliKelvin temperatures. Our measurement imprecision reaches a promising 30 times the expected imprecision at the standard quantum limit, and we quantify our ability to extract measurement backaction from our results as well as elucidate the important steps that will be required to progress towards the full quantum limit with this new detector.
△ Less
Submitted 7 April, 2008; v1 submitted 11 January, 2008;
originally announced January 2008.