Showing 1–50 of 88 results for author: Bowen, P

Ultralow Dissipation Nanomechanical Devices from Monocrystalline Silicon Carbide

Authors: Leo Sementilli, Daniil M. Lukin, Hope Lee, Erick Romero, Jelena Vučković, Warwick P. Bowen

Abstract: Due to their low mass and long coherence times, nanomechanical resonators have many applications, from biomolecule mass sensing to hybrid quantum interfaces. In many instances the performance is limited by internal material dam**. Crystalline materials promise lower material dissipation, however due to fabrication challenges, amorphous materials are more commonly utilized. Crystalline silicon ca… ▽ More Due to their low mass and long coherence times, nanomechanical resonators have many applications, from biomolecule mass sensing to hybrid quantum interfaces. In many instances the performance is limited by internal material dam**. Crystalline materials promise lower material dissipation, however due to fabrication challenges, amorphous materials are more commonly utilized. Crystalline silicon carbide (SiC) is particularly appealing due to its exquisite mechanical, electrical and optical properties, but to-date exhibits higher nanomechanical dissipation than both amorphous and other crystalline materials. To address this, we fabricate nanomechanical resonators thinned from bulk monocrystalline 4H-SiC. Characterization of multiple resonators of different sizes and thicknesses, allows us to discern the surface and volumetric contributions to dissipation. We measure mechanical dissipation rates as low as 2.7 mHz, more than an order-of-magnitude lower than any previous crystalline SiC resonator, yielding quality factors as high as 20 million at room temperature. We also quantify the nonlinear dissipation of SiC nanomechanical resonators for the first time, finding that it is lower than other materials. This promises higher sensitivity in applications such as mass sensing. By achieving exceptionally low dissipation in SiC resonators, our work provides a path towards improved performance in sensing and other applications. △ Less

Submitted 22 April, 2024; originally announced April 2024.

Comments: 10 pages, 6 figure, Supplementary Info

Fast biological imaging with quantum-enhanced Raman microscopy

Authors: Alex Terrasson, Nicolas P. Mauranyapin, Catxere A. Casacio, Joel Q. Grim, Kai Barnscheidt, Boris Hage, Michael A. Taylor, W. P. Bowen

Abstract: Stimulated Raman scattering (SRS) microscopy is a powerful label-free imaging technique that probes the vibrational response of chemicals with high specificity and sensitivity. High-power, quantum-enhanced SRS microscopes have been recently demonstrated and applied to polymers and biological samples. Quantum correlations, in the form of squeezed light, enable the microscopes to operate below the s… ▽ More Stimulated Raman scattering (SRS) microscopy is a powerful label-free imaging technique that probes the vibrational response of chemicals with high specificity and sensitivity. High-power, quantum-enhanced SRS microscopes have been recently demonstrated and applied to polymers and biological samples. Quantum correlations, in the form of squeezed light, enable the microscopes to operate below the shot noise limit, enhancing their performance without increasing the illumination intensity. This addresses the signal-to-noise ratio (SNR) and speed constraints introduced by photodamage in shot noise-limited microscopes. Previous microscopes have either used single-beam squeezing, but with insufficient brightness to reach the optimal ratio of pump-to-Stokes intensity for maximum SNR, or have used twin-beam squeezing and suffered a 3 dB noise penalty. Here we report a quantum-enhanced Raman microscope that uses a bright squeezed single-beam, enabling operation at the optimal efficiency of the SRS process. The increase in brightness leads to multimode effects that degrade the squeezing level, which we partially overcome using spatial filtering. We apply our quantum-enhanced SRS microscope to biological samples, and demonstrate quantum-enhanced multispectral imaging of living cells. The imaging speed of 100x100 pixels in 18 seconds allows the dynamics of cell organelles to be resolved. The SNR achieved is compatible with video rate imaging, with the quantum correlations yielding a 20% improvement in imaging speed compared to shot noise limited operation. △ Less

Submitted 15 March, 2024; originally announced March 2024.

Absolute Doubly Differential Angular Sputtering Yields for 20 keV Kr+ on Polycrystalline Cu

Authors: Caixia Bu, Liam S. Morrissey, Benjamin C. Bostick, Matthew H. Burger, Kyle P. Bowen, Steven N. Chillrud, Deborah L. Domingue, Catherine A. Dukes, Denton S. Ebel, George E. Harlow, Pierre-Michel Hillenbrand, Dmitry A. Ivanov, Rosemary M. Killen, James M. Ross, Daniel Schury, Orenthal J. Tucker, Xavier Urbain, Ruitian Zhang, Daniel W. Savin

Abstract: We have measured the absolute doubly differential angular sputtering yield for 20 keV Kr+ impacting a polycrystalline Cu slab at an incidence angle of θi = 45° relative to the surface normal. Sputtered Cu atoms were captured using collectors mounted on a half dome above the sample, and the sputtering distribution was measured as a function of the sputtering polar, θs, and azimuthal, phi, angles. A… ▽ More We have measured the absolute doubly differential angular sputtering yield for 20 keV Kr+ impacting a polycrystalline Cu slab at an incidence angle of θi = 45° relative to the surface normal. Sputtered Cu atoms were captured using collectors mounted on a half dome above the sample, and the sputtering distribution was measured as a function of the sputtering polar, θs, and azimuthal, phi, angles. Absolute results of the sputtering yield were determined from the mass gain of each collector, the ion dose, and the solid angle subtended, after irradiation to a total fluence of ~ 1 x 10^18 ions/cm^2. Our approach overcomes shortcomings of commonly used methods that only provide relative yields as a function of θs in the incidence plane (defined by the ion velocity and the surface normal). Our experimental results display an azimuthal variation that increases with increasing θs and is clearly discrepant with simulations using binary collision theory. We attribute the observed azimuthal anisotropy to ion-induced formation of micro- and nano-scale surface features that suppress the sputtering yield through shadowing and redeposition effects, neither of which are accounted for in the simulations. Our experimental results demonstrate the importance of doubly differential angular sputtering studies to probe ion sputtering processes at a fundamental level and to explore the effect of ion-beam-generated surface roughness. △ Less

Submitted 19 December, 2023; originally announced December 2023.

Comments: 29 pages, 9 figures

Emergent Error Correcting States in Networks of Nonlinear Oscillators

Authors: Xiaoya **, Christopher G. Baker, Erick Romero, Nicholas P. Mauranyapin, Timothy M. F. Hirsch, Warwick P. Bowen, Glen I. Harris

Abstract: Networks of nonlinear oscillators can exhibit complex collective behaviour ranging from synchronised states to chaos. Here, we simulate the dynamics of three coupled Duffing oscillators whose multiple equilibrium states can be used for information processing and storage. Our analysis reveals that even for this small network, there is the emergence of an error correcting phase where the system auto… ▽ More Networks of nonlinear oscillators can exhibit complex collective behaviour ranging from synchronised states to chaos. Here, we simulate the dynamics of three coupled Duffing oscillators whose multiple equilibrium states can be used for information processing and storage. Our analysis reveals that even for this small network, there is the emergence of an error correcting phase where the system autonomously corrects errors from random impulses. The system has several surprising and attractive features, including dynamic isolation of resonators exposed to extreme impulses and the ability to correct simultaneous errors. The existence of an error correcting phase opens the prospect of fault-tolerant information storage, with particular applications in nanomechanical computing. △ Less

Submitted 7 December, 2023; originally announced December 2023.

Quantitative Profilometric Measurement of Magnetostriction in Thin-Films

Authors: Hamish Greenall, Benjamin J. Carey, Douglas Bulla, James S. Bennett, Glen I. Harris, Fernando Gotardo, Scott Foster, Warwick P. Bowen

Abstract: A DC non-contact method for measuring the magnetostrictive strain in thin-films is demonstrated, achieving a state-of-the-art sensitivity of 0.1 ppm. In this method, an optical profilometer is used to measure the curvature induced in a magnetostrictively coated coverslip under a DC field through phase-sensitive interferometry. From this the magnetostrictive stress and strain are calculated using S… ▽ More A DC non-contact method for measuring the magnetostrictive strain in thin-films is demonstrated, achieving a state-of-the-art sensitivity of 0.1 ppm. In this method, an optical profilometer is used to measure the curvature induced in a magnetostrictively coated coverslip under a DC field through phase-sensitive interferometry. From this the magnetostrictive stress and strain are calculated using Stoney's formula. This addresses limitations of conventional techniques that measure magnetostriction based on the deflection of a cantilever under an AC field, which require complex dedicated set-ups and are sensitive to vibrational noise. Further, it reveals information about the anisotropy of the film and allows for the possibility of measuring multiple samples simultaneously. The theoretical sensitivity limits are derived, predicting a shot-noise-limit of 0.01 ppm. The method is implemented to measure the magnetostrictive hysteresis and piezomagnetic coupling of thin-film galfenol. Degradation in film performance is observed above a thickness of 206 nm, alongside a change in coercivity. This prompts investigation into the growth and optimization of galfenol films for use in devices. △ Less

Submitted 21 November, 2023; originally announced November 2023.

Comments: 5 figures. Supplementary information included

Quantum light microscopy

Authors: W. P. Bowen, Helen M. Chrzanowski, Dan Oron, Sven Ramelow, Dmitry Tabakaev, Alex Terrasson, Rob Thew

Abstract: Much of our progress in understanding microscale biology has been powered by advances in microscopy. For instance, super-resolution microscopes allow the observation of biological structures at near-atomic-scale resolution, while multi-photon microscopes allow imaging deep into tissue. However, biological structures and dynamics still often remain out of reach of existing microscopes, with further… ▽ More Much of our progress in understanding microscale biology has been powered by advances in microscopy. For instance, super-resolution microscopes allow the observation of biological structures at near-atomic-scale resolution, while multi-photon microscopes allow imaging deep into tissue. However, biological structures and dynamics still often remain out of reach of existing microscopes, with further advances in signal-to-noise, resolution and speed needed to access them. In many cases, the performance of microscopes is now limited by quantum effects -- such as noise due to the quantisation of light into photons or, for multi-photon microscopes, the low cross-section of multi-photon scattering. These limitations can be overcome by exploiting features of quantum mechanics such as entanglement. Quantum effects can also provide new ways to enhance the performance of microscopes, such as new super-resolution techniques and new techniques to image at difficult to reach wavelengths. This review provides an overview of these various ways in which quantum techniques can improve microscopy, including recent experimental progress. It seeks to provide a realistic picture of what is possible, and what the constraints and opportunities are. △ Less

Submitted 23 November, 2023; v1 submitted 9 November, 2023; originally announced November 2023.

Directional emission in an on-chip acoustic waveguide

Authors: Timothy M. F. Hirsch, Nicolas P. Mauranyapin, Erick Romero, Tina **, Glen Harris, Christopher G. Baker, Warwick . P. Bowen

Abstract: Integrated acoustic circuits leverage guided acoustic waves for applications ranging from radio-frequency filters to quantum state transfer, biochemical sensing and nanomechanical computing. In many applications it is desirable to have a method for unidirectional acoustic wave emission. In this work we demonstrate directional emission in an integrated single-mode, on-chip membrane waveguide, demon… ▽ More Integrated acoustic circuits leverage guided acoustic waves for applications ranging from radio-frequency filters to quantum state transfer, biochemical sensing and nanomechanical computing. In many applications it is desirable to have a method for unidirectional acoustic wave emission. In this work we demonstrate directional emission in an integrated single-mode, on-chip membrane waveguide, demonstrating over 99.9% directional suppression and reconfigurable directionality. This avoids both loss and unwanted crosstalk, allowing the creation of more complex and compact phononic circuits. △ Less

Submitted 12 October, 2023; originally announced October 2023.

Waveguide-integrated and portable optomechanical magnetometer

Authors: Fernando Gotardo, Benjamin J. Carey, Hamish Greenall, Glen I. Harris, Erick Romero, Douglas Bulla, Elizabeth M. Bridge, James S. Bennett, Scott Foster, Warwick P. Bowen

Abstract: Optomechanical magnetometers enable highly sensitive magnetic field sensing. However, all such magnetometers to date have been optically excited and read-out either via free space or a tapered optical fiber. This limits their scalability and integrability, and ultimately their range of applications. Here, we present an optomechanical magnetometer that is excited and read out via a suspended optica… ▽ More Optomechanical magnetometers enable highly sensitive magnetic field sensing. However, all such magnetometers to date have been optically excited and read-out either via free space or a tapered optical fiber. This limits their scalability and integrability, and ultimately their range of applications. Here, we present an optomechanical magnetometer that is excited and read out via a suspended optical waveguide fabricated on the same silicon chip as the magnetometer. Moreover, we demonstrate that thermomechanical noise limited sensitivity is possible using portable electronics and laser. The magnetometer employs a silica microdisk resonator selectively sputtered with a magnetostrictive film of galfenol (FeGa) which induces a resonant frequency shift in response to an external magnetic field. Experimental results reveal the retention of high quality-factor optical whispering gallery mode resonances whilst also demonstrating high sensitivity and dynamic range in ambient conditions. The use of off-the-shelf portable electronics without compromising sensor performance demonstrates promise for applications. △ Less

Submitted 27 July, 2023; originally announced July 2023.

Comments: 9 pages, 4 figures

Optomechanical Dark Matter Direct Detection

Authors: Christopher G. Baker, Warwick P. Bowen, Peter Cox, Matthew J. Dolan, Maxim Goryachev, Glen Harris

Abstract: We propose the Optomechanical Dark-matter INstrument (ODIN), based on a new method for the direct detection of low-mass dark matter. We consider dark matter interacting with superfluid helium in an optomechanical cavity. Using an effective field theory, we calculate the rate at which dark matter scatters off phonons in a highly populated, driven acoustic mode of the cavity. This scattering process… ▽ More We propose the Optomechanical Dark-matter INstrument (ODIN), based on a new method for the direct detection of low-mass dark matter. We consider dark matter interacting with superfluid helium in an optomechanical cavity. Using an effective field theory, we calculate the rate at which dark matter scatters off phonons in a highly populated, driven acoustic mode of the cavity. This scattering process deposits a phonon into a second acoustic mode in its ground state. The deposited phonon ($μ$eV range) is then converted to a photon (eV range) via an optomechanical interaction with a pump laser. This photon can be efficiently detected, providing a means to sensitively probe keV scale dark matter. We provide realistic estimates of the backgrounds and discuss the technical challenges associated with such an experiment. We calculate projected limits on dark matter-nucleon interactions for dark matter masses ranging from 0.5 to 300 keV and estimate that a future device could probe cross-sections as low as $\mathcal{O}(10^{-32})$ cm$^2$. △ Less

Submitted 16 June, 2023; originally announced June 2023.

Comments: 6 pages, 4 figures + supplementary material

Analog, In-memory Compute Architectures for Artificial Intelligence

Authors: Patrick Bowen, Guy Regev, Nir Regev, Bruno Pedroni, Edward Hanson, Yiran Chen

Abstract: This paper presents an analysis of the fundamental limits on energy efficiency in both digital and analog in-memory computing architectures, and compares their performance to single instruction, single data (scalar) machines specifically in the context of machine inference. The focus of the analysis is on how efficiency scales with the size, arithmetic intensity, and bit precision of the computati… ▽ More This paper presents an analysis of the fundamental limits on energy efficiency in both digital and analog in-memory computing architectures, and compares their performance to single instruction, single data (scalar) machines specifically in the context of machine inference. The focus of the analysis is on how efficiency scales with the size, arithmetic intensity, and bit precision of the computation to be performed. It is shown that analog, in-memory computing architectures can approach arbitrarily high energy efficiency as both the problem size and processor size scales. △ Less

Submitted 13 January, 2023; originally announced February 2023.

Comments: 17 pages, 10 figures

Continuous optical-to-mechanical quantum state transfer in the unresolved sideband regime

Authors: Amy Navarathna, James S. Bennett, Warwick P. Bowen

Abstract: Optical-to-mechanical quantum state transfer is an important capability for future quantum networks, quantum communication, and distributed quantum sensing. However, existing continuous state transfer protocols operate in the resolved sideband regime, necessitating a high-quality optical cavity and a high mechanical resonance frequency. Here, we propose a continuous protocol that operates in the u… ▽ More Optical-to-mechanical quantum state transfer is an important capability for future quantum networks, quantum communication, and distributed quantum sensing. However, existing continuous state transfer protocols operate in the resolved sideband regime, necessitating a high-quality optical cavity and a high mechanical resonance frequency. Here, we propose a continuous protocol that operates in the unresolved sideband regime. The protocol is based on feedback cooling, can be implemented with current technology, and is able to transfer non-Gaussian quantum states with high fidelity. Our protocol significantly expands the kinds of optomechanical devices for which continuous optical-to-mechanical state transfer is possible, paving the way towards quantum technological applications and the preparation of macroscopic superpositions to test the fundamentals of quantum science. △ Less

Submitted 10 January, 2023; originally announced January 2023.

Cascading of Nanomechanical Resonator Logic

Authors: T. **, C. G. Baker, E. Romero, N. P. Mauranyapin, T. M. F. Hirsch, W. P. Bowen, G. I. Harris

Abstract: Nanomechanical systems have been proposed as an alternative computing platform for high radiation environments, where semiconductor electronics traditionally fail, as well as to allow improved gate densities and energy consumption. While there have been numerous demonstrations of individual nanomechanical logic gates leveraging the Duffing nonlinearity, the development of useful nanomechanical log… ▽ More Nanomechanical systems have been proposed as an alternative computing platform for high radiation environments, where semiconductor electronics traditionally fail, as well as to allow improved gate densities and energy consumption. While there have been numerous demonstrations of individual nanomechanical logic gates leveraging the Duffing nonlinearity, the development of useful nanomechanical logic circuits depends strongly on the ability to cascade multiple logic gates. Here we show theoretically that cascading nanomechanical logic gates, where the output of one gate is fed into the input of another, is a complex problem due to the transient dynamics of the collective system. These transient behaviours can lead to undesired bit flips, which precludes cascading altogether. We then show that this issue can be circumvented by carefully initialising the system prior to computation. We illustrate these salient features through the modelled dynamics of two cascaded nanomechanical NAND gates. △ Less

Submitted 5 December, 2022; originally announced December 2022.

Comments: Manuscript: 21 pages 9 figures, includes supplementary information 4 pages 1 figure

Engineered entropic forces allow ultrastrong dynamical backaction

Authors: Andreas Sawadsky, Raymond A. Harrison, Glen I. Harris, Walter W. Wasserman, Yasmine L. Sfendla, Warwick P. Bowen, Christopher G. Baker

Abstract: When confined within an optical cavity, light can exert strong radiation pressure forces. Combined with dynamical backaction, this enables important processes such as laser cooling, and applications ranging from precision sensors to quantum memories and interfaces. However, the magnitude of radiation pressure forces is constrained by the energy mismatch between photons and phonons. Here, we overco… ▽ More When confined within an optical cavity, light can exert strong radiation pressure forces. Combined with dynamical backaction, this enables important processes such as laser cooling, and applications ranging from precision sensors to quantum memories and interfaces. However, the magnitude of radiation pressure forces is constrained by the energy mismatch between photons and phonons. Here, we overcome this barrier using entropic forces arising from the absorption of light. We show that entropic forces can exceed the radiation pressure force by eight orders of magnitude, and demonstrate this using a superfluid helium third-sound resonator. We develop a framework to engineer the dynamical backaction from entropic forces, applying it to achieve phonon lasing with a threshold three orders of magnitude lower than previous work. Our results present a pathway to exploit entropic forces in quantum devices, and to study nonlinear fluid phenomena such as turbulence and solitons. △ Less

Submitted 11 August, 2022; v1 submitted 11 August, 2022; originally announced August 2022.

Comments: Main text is 10 pages, 5 figures. Supplements is 21 pages, 11 figures

Journal ref: Science Advances 9, eade3591 (2023)

Roadmap for Optical Tweezers

Authors: Giovanni Volpe, Onofrio M. Maragò, Halina Rubinzstein-Dunlop, Giuseppe Pesce, Alexander B. Stilgoe, Giorgio Volpe, Georgiy Tkachenko, Viet Giang Truong, Síle Nic Chormaic, Fatemeh Kalantarifard, Parviz Elahi, Mikael Käll, Agnese Callegari, Manuel I. Marqués, Antonio A. R. Neves, Wendel L. Moreira, Adriana Fontes, Carlos L. Cesar, Rosalba Saija, Abir Saidi, Paul Beck, Jörg S. Eismann, Peter Banzer, Thales F. D. Fernandes, Francesco Pedaci , et al. (58 additional authors not shown)

Abstract: Optical tweezers are tools made of light that enable contactless pushing, trap**, and manipulation of objects ranging from atoms to space light sails. Since the pioneering work by Arthur Ashkin in the 1970s, optical tweezers have evolved into sophisticated instruments and have been employed in a broad range of applications in life sciences, physics, and engineering. These include accurate force… ▽ More Optical tweezers are tools made of light that enable contactless pushing, trap**, and manipulation of objects ranging from atoms to space light sails. Since the pioneering work by Arthur Ashkin in the 1970s, optical tweezers have evolved into sophisticated instruments and have been employed in a broad range of applications in life sciences, physics, and engineering. These include accurate force and torque measurement at the femtonewton level, microrheology of complex fluids, single micro- and nanoparticle spectroscopy, single-cell analysis, and statistical-physics experiments. This roadmap provides insights into current investigations involving optical forces and optical tweezers from their theoretical foundations to designs and setups. It also offers perspectives for applications to a wide range of research fields, from biophysics to space exploration. △ Less

Submitted 28 June, 2022; originally announced June 2022.

Comments: 181 pages, 61 figures

Scalable nanomechanical logic gate

Authors: Erick Romero, Nicolas P. Mauranyapin, Timothy M. F. Hirsch, Rachpon Kalra, Christopher G. Baker, Glen I. Harris, Warwick P. Bowen

Abstract: Nanomechanical computers promise robust, low energy information processing. However, to date, electronics have generally been required to interconnect gates, while no scalable, purely nanomechanical approach to computing has been achieved. Here, we demonstrate a nanomechanical logic gate in a scalable architecture. Our gate uses the bistability of a nonlinear mechanical resonator to define logical… ▽ More Nanomechanical computers promise robust, low energy information processing. However, to date, electronics have generally been required to interconnect gates, while no scalable, purely nanomechanical approach to computing has been achieved. Here, we demonstrate a nanomechanical logic gate in a scalable architecture. Our gate uses the bistability of a nonlinear mechanical resonator to define logical states. These states are efficiently coupled into and out of the gate via nanomechanical waveguides, which provide the mechanical equivalent of electrical wires. Crucially, the input and output states share the same spatiotemporal characteristics, so that the output of one gate can serve as the input for the next. Our architecture is CMOS compatible, while realistic miniaturisation could allow both gigahertz frequencies and an energy cost that approaches the fundamental Landauer limit. Together this presents a pathway towards large-scale nanomechanical computers, as well as neuromorphic networks able to simulate computationally hard problems and interacting many-body systems. △ Less

Submitted 24 June, 2022; v1 submitted 23 June, 2022; originally announced June 2022.

Comments: Manuscript 11 pages 5 figures, includes supplementary information 11 pages 6 figures

Cryogenic and hermetically sealed packaging of photonic chips for optomechanics

Authors: W. W. Wasserman, R. A. Harrison, G. I. Harris, A. Sawadsky, Y. L. Sfendla, W. P. Bowen, C. G. Baker

Abstract: We demonstrate a hermetically sealed packaging system for integrated photonic devices at cryogenic temperatures with plug-and-play functionality. This approach provides the ability to encapsulate a controlled amount of gas into the optical package allowing helium to be used as a heat-exchange gas to thermalize photonic devices, or condensed into a superfluid covering the device. This packaging sys… ▽ More We demonstrate a hermetically sealed packaging system for integrated photonic devices at cryogenic temperatures with plug-and-play functionality. This approach provides the ability to encapsulate a controlled amount of gas into the optical package allowing helium to be used as a heat-exchange gas to thermalize photonic devices, or condensed into a superfluid covering the device. This packaging system was tested using a silicon-on-insulator slot waveguide resonator which fills with superfluid $^4$He below the transition temperature. To optimize the fiber-to-chip optical integration 690 tests were performed by thermally cycling optical fibers bonded to various common photonic chip substrates (silicon, silicon oxide and HSQ) with a range of glues (NOA 61, NOA 68, NOA 88, NOA 86H and superglue). This showed that NOA 86H (a UV curing optical adhesive with a latent heat catalyst) provided the best performance under cryogenic conditions for all the substrates tested. The technique is relevant to superfluid optomechanics experiments, as well as quantum photonics and quantum optomechanics applications. △ Less

Submitted 10 May, 2022; originally announced May 2022.

Comments: Walter W. Wasserman and Raymond A. Harrison contributed equally to this work. 9 pages, 4 figures

Journal ref: Opt. Express 30(17), 30822-30831 (2022)

Optimizing Polarizability Distributions for Metasurface Apertures with Lorentzian-Constrained Radiators

Authors: Patrick T. Bowen, Michael Boyarsky, Laura M. Pulido-Mancera, David R. Smith, Okan Yurduseven, Mohsen Sazegar

Abstract: We present a design strategy for selecting the effective polarizability distribution for a metasurface aperture needed to form a desired radiation pattern. A metasurface aperture consists of an array of subwavelength metamaterial elements, each of which can be conceptualized as a radiating, polarizable dipole. An ideal polarizability distribution can be determined by using a holographic approach t… ▽ More We present a design strategy for selecting the effective polarizability distribution for a metasurface aperture needed to form a desired radiation pattern. A metasurface aperture consists of an array of subwavelength metamaterial elements, each of which can be conceptualized as a radiating, polarizable dipole. An ideal polarizability distribution can be determined by using a holographic approach to first obtain the necessary aperture fields, which can then be converted to a polarizability distribution using equivalence principles. To achieve this ideal distribution, the polarizability of each element would need to have unconstrained magnitude and phase; however, for a single, passive, metamaterial resonator the magnitude and phase of the effective polarizability are inextricably linked through the properties of the Lorentzian resonance, with the range of phase values restricted to a span of at most 180 degrees. Here, we introduce a family of map**s from the ideal to the available polarizability distributions, easily visualized by plotting both polarizabilities in the complex plane. Using one of these map**s it is possible to achieve highly optimized beam patterns from a metasurface antenna, despite the inherent resonator limitations. We introduce the map** technique and provide several specific examples, with numerical simulations used to confirm the design approach. △ Less

Submitted 1 May, 2022; originally announced May 2022.

Comments: 14 pages, 14 figures. To be submitted to Physical Review Applied

Recent advances in supercontinuum generation in specialty optical fibers [Invited]

Authors: T. Sylvestre, E. Genier, A. N. Ghosh, P. Bowen, G. Genty, J. Troles, A. Mussot, A. C. Peacock, M. Klimczak, A. M. Heidt, J. C. Travers, O. Bang, J. M. Dudley

Abstract: The physics and applications of fiber-based supercontinuum (SC) sources have been a subject of intense interest over the last decade, with significant impact on both basic science and industry. New uses for SC sources are also constantly emerging due to their unique properties that combine high brightness, multi-octave frequency bandwidth, fiber delivery, and single-mode output. The last few years… ▽ More The physics and applications of fiber-based supercontinuum (SC) sources have been a subject of intense interest over the last decade, with significant impact on both basic science and industry. New uses for SC sources are also constantly emerging due to their unique properties that combine high brightness, multi-octave frequency bandwidth, fiber delivery, and single-mode output. The last few years have seen significant research efforts focused on extending the wavelength coverage of SC sources towards the 2 to 20 $μ$m molecular fingerprint mid-infrared (MIR) region and in the ultraviolet (UV) down to 100 nm, while also improving stability, noise and coherence, output power, and polarization properties. Here we review a selection of recent advances in SC generation in a range of specialty optical fibers, including fluoride, chalcogenide, telluride, and silicon-core fibers for the MIR; UV-grade silica fibers and gas-filled hollow-core fibers for the UV range; and all-normal dispersion fibers for ultralow-noise coherent SC generation. △ Less

Submitted 5 November, 2021; originally announced November 2021.

Comments: Copyright 2021 Optica Publishing Group. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modifications of the content of this paper are prohibited

Journal ref: J. Opt. Soc. Am. B 38, F90-F103 (2021)

Quantum Biotechnology

Authors: Nicolas P. Mauranyapin, Alex Terrason, Warwick P. Bowen

Abstract: Quantum technologies leverage the laws of quantum physics to achieve performance advantages in applications ranging from computing to communications and sensing. They have been proposed to have a range of applications in biological science. This includes better microscopes and biosensors, improved simulations of molecular processes, and new capabilities to control the behaviour of biomolecules and… ▽ More Quantum technologies leverage the laws of quantum physics to achieve performance advantages in applications ranging from computing to communications and sensing. They have been proposed to have a range of applications in biological science. This includes better microscopes and biosensors, improved simulations of molecular processes, and new capabilities to control the behaviour of biomolecules and chemical reactions. Quantum effects are also predicted, with much debate, to have functional benefits in biology, for instance, allowing more efficient energy transport and improving the rate of enzyme catalysis. Conversely, the robustness of biological systems to disorder from their environment has led to proposals to use them as components within quantum technologies, for instance as light sources for quantum communication systems. Together, this breadth of prospective applications at the interface of quantum and biological science suggests that quantum physics will play an important role in stimulating future biotechnological advances. This review aims to provide an overview of this emerging field of quantum biotechnology, introducing current capabilities, future prospects, and potential areas of impact. The review is written to be accessible to the non-expert and focuses on the four key areas of quantum-enabled sensing, quantum-enabled imaging, quantum biomolecular control, and quantum effects in biology. △ Less

Submitted 3 November, 2021; originally announced November 2021.

Comments: 34 pages,7 figures

Precision Magnetometers for Aerospace Applications

Authors: James S. Bennett, Brian E. Vyhnalek, Hamish Greenall, Elizabeth M. Bridge, Fernando Gotardo, Stefan Forstner, Glen I. Harris, Félix A. Miranda, Warwick P. Bowen

Abstract: Aerospace technologies are crucial for modern civilization; space-based infrastructure underpins weather forecasting, communications, terrestrial navigation and logistics, planetary observations, solar monitoring, and other indispensable capabilities. Extraplanetary exploration -- including orbital surveys and (more recently) roving, flying, or submersible unmanned vehicles -- is also a key scient… ▽ More Aerospace technologies are crucial for modern civilization; space-based infrastructure underpins weather forecasting, communications, terrestrial navigation and logistics, planetary observations, solar monitoring, and other indispensable capabilities. Extraplanetary exploration -- including orbital surveys and (more recently) roving, flying, or submersible unmanned vehicles -- is also a key scientific and technological frontier, believed by many to be paramount to the long-term survival and prosperity of humanity. All of these aerospace applications require reliable control of the craft and the ability to record high-precision measurements of physical quantities. Magnetometers deliver on both of these aspects, and have been vital to the success of numerous missions. In this review paper, we provide an introduction to the relevant instruments and their applications. We consider past and present magnetometers, their proven aerospace applications, and emerging uses. We then look to the future, reviewing recent progress in magnetometer technology. We particularly focus on magnetometers that use optical readout, including atomic magnetometers, magnetometers based on quantum defects in diamond, and optomechanical magnetometers. These optical magnetometers offer a combination of field sensitivity, size, weight, and power consumption that allows them to reach performance regimes that are inaccessible with existing techniques. This promises to enable new applications in areas ranging from unmanned vehicles to navigation and exploration. △ Less

Submitted 30 June, 2021; originally announced June 2021.

Nanomechanical Dissipation and Strain Engineering

Authors: Leo Sementilli, Erick Romero, Warwick P. Bowen

Abstract: Nanomechanical resonators have applications in a wide variety of technologies ranging from biochemical sensors to mobile communications, quantum computing, inertial sensing, and precision navigation. The quality factor of the mechanical resonance is critical for many applications. Until recently, mechanical quality factors rarely exceeded a million. In the past few years however, new methods have… ▽ More Nanomechanical resonators have applications in a wide variety of technologies ranging from biochemical sensors to mobile communications, quantum computing, inertial sensing, and precision navigation. The quality factor of the mechanical resonance is critical for many applications. Until recently, mechanical quality factors rarely exceeded a million. In the past few years however, new methods have been developed to exceed this boundary. These methods involve careful engineering of the structure of the nanomechanical resonator, including the use of acoustic bandgaps and nested structures to suppress dissipation into the substrate, and the use of dissipation dilution and strain engineering to increase the mechanical frequency and suppress intrinsic dissipation. Together, they have allowed quality factors to reach values near a billion at room temperature, resulting in exceptionally low dissipation. This review aims to provide a pedagogical introduction to these new methods, primarily targeted to readers who are new to the field, together with an overview of the existing state-of-the-art, what may be possible in the future, and a perspective on the future applications of these extreme-high quality resonators. △ Less

Submitted 1 June, 2021; v1 submitted 31 May, 2021; originally announced May 2021.

Comments: 22 pages, 11 figures

Dynamic polarizability of macromolecules for single-molecule optical biosensing

Authors: Larnii S. Booth, Eloise V. Browne, Nicolas P. Mauranyapin, Lars S. Madsen, Shelley Barfoot, Alan Mark, Warwick P. Bowen

Abstract: The structural dynamics of macromolecules is important for most microbiological processes, from protein folding to the origins of neurodegenerative disorders. Noninvasive measurements of these dynamics are highly challenging. Recently, optical sensors have been shown to allow noninvasive time-resolved measurements of the dynamic polarizability of single-molecules. Here we introduce a method to eff… ▽ More The structural dynamics of macromolecules is important for most microbiological processes, from protein folding to the origins of neurodegenerative disorders. Noninvasive measurements of these dynamics are highly challenging. Recently, optical sensors have been shown to allow noninvasive time-resolved measurements of the dynamic polarizability of single-molecules. Here we introduce a method to efficiently predict the dynamic polarizability from the atomic configuration of a given macromolecule. This provides a means to connect the measured dynamic polarizability to the underlying structure of the molecule, and therefore to connect temporal measurements to structural dynamics. To illustrate the methodology we calculate the change in polarizability as a function of time based on conformations extracted from molecular dynamics simulations and using different conformations of motor proteins solved crystalographically. This allows us to quantify the magnitude of the changes in polarizablity due to thermal and functional motions. △ Less

Submitted 13 July, 2021; v1 submitted 26 May, 2021; originally announced May 2021.

Comments: 13 pages, 7 figures. Updated acknowledgements, added additional information (correspondence information)

A computational tool to characterize particle tracking measurements in optical tweezers

Authors: Michael A. Taylor, Warwick P. Bowen

Abstract: Here we present a computational tool for optical tweezers which calculates the particle tracking signal measured with a quadrant detector and the shot-noise limit to position resolution. The tool is a piece of Matlab code which functions within the freely available Optical Tweezers Toolbox. It allows the measurements performed in most optical tweezers experiments to be theoretically characterized… ▽ More Here we present a computational tool for optical tweezers which calculates the particle tracking signal measured with a quadrant detector and the shot-noise limit to position resolution. The tool is a piece of Matlab code which functions within the freely available Optical Tweezers Toolbox. It allows the measurements performed in most optical tweezers experiments to be theoretically characterized in a fast and easy manner. The code supports particles with arbitrary size, any optical fields and any combination of objective and condenser, and performs a full vector calculation of the relevant fields. Example calculations are presented which show the tracking signals for different particles, and the shot noise limit to position sensitivity as a function of the effective condenser NA. △ Less

Submitted 26 May, 2021; originally announced May 2021.

Journal ref: Journal of Optics 15 085701 (2013)

Enhanced optical trap** via structured scattering

Authors: Michael A Taylor, Muhammad Waleed, Alexander B Stilgoe, Halina Rubinsztein-Dunlop, Warwick P Bowen

Abstract: Interferometry can completely redirect light, providing the potential for strong and controllable optical forces. However, small particles do not naturally act like interferometric beamsplitters, and the optical scattering from them is not generally thought to allow efficient interference. Instead, optical trap** is typically achieved via deflection of the incident field. Here we show that a sui… ▽ More Interferometry can completely redirect light, providing the potential for strong and controllable optical forces. However, small particles do not naturally act like interferometric beamsplitters, and the optical scattering from them is not generally thought to allow efficient interference. Instead, optical trap** is typically achieved via deflection of the incident field. Here we show that a suitably structured incident field can achieve beamsplitter-like interactions with scattering particles. The resulting trap offers order-of-magnitude higher stiffness than the usual Gaussian trap in one axis, even when constrained to phase-only structuring. We demonstrate trap** of 3.5 to 10.0~$μ$m silica spheres, achieving stiffness up to 27.5$\pm$4.1 times higher than is possible using Gaussian traps, and two orders of magnitude higher measurement signal-to-noise ratio. These results are highly relevant to many applications, including cellular manipulation, fluid dynamics, micro-robotics, and tests of fundamental physics. △ Less

Submitted 20 May, 2021; originally announced May 2021.

Journal ref: Nature Photonics 9, 669-673 (2015)

Ultrasensitive optical magnetometry at the microscale

Authors: Stefan Forstner, Eoin Sheridan, Joachim Knittel, Christopher L. Humphreys, George A. Brawley, Halina Rubinsztein-Dunlop, Warwick P. Bowen

Abstract: Recent advances in optical magnetometry have achieved record sensitivity at both macro- and nano-scale. Combined with high bandwidth and non-cryogenic operation, this has enabled many applications. By comparison, microscale optical magnetometers have been constrained to sensitivities five orders-of-magnitude worse than the state-of-the-art. Here, we report an ambient optical micro-magnetometer ope… ▽ More Recent advances in optical magnetometry have achieved record sensitivity at both macro- and nano-scale. Combined with high bandwidth and non-cryogenic operation, this has enabled many applications. By comparison, microscale optical magnetometers have been constrained to sensitivities five orders-of-magnitude worse than the state-of-the-art. Here, we report an ambient optical micro-magnetometer operating for the first time in the picoTesla range, a more than three order-of-magnitude advance on previous results. Unlike other ultrasensitive optical magnetometers, the device operates at earth field, achieves tens of MHz bandwidth, and is integrated and fiber coupled. Combined with 60 micrometer spatial resolution and microWatt optical power requirements, these unique capabilities open up a broad range of applications including cryogen-free and microfluidic magnetic resonance imaging, and electromagnetic interference-free investigation of spin physics in condensed matter systems such as semiconductors and ultracold atom clouds △ Less

Submitted 11 April, 2021; originally announced April 2021.

Journal ref: Adv Mat 26 (2014) 6348

Interactions of Tris with rutile surfaces and consequences for in vitro bioactivity testing

Authors: Azade YazdanYar, Léa Buswell, Delphin Pantaloni, Ulrich Aschauer, Paul Bowen

Abstract: Tris(hydroxymethyl)aminomethane (Tris) has been used as the buffer in bioactivity testing for over two decades and has become a standard choice for the scientific community. While it is believed to be non-interacting, the extent of its interactions with titanium oxide surfaces has not been systematically studied. Here, we use experimental (zeta potential measurements) and computational (molecular… ▽ More Tris(hydroxymethyl)aminomethane (Tris) has been used as the buffer in bioactivity testing for over two decades and has become a standard choice for the scientific community. While it is believed to be non-interacting, the extent of its interactions with titanium oxide surfaces has not been systematically studied. Here, we use experimental (zeta potential measurements) and computational (molecular dynamics) approaches to evaluate the interaction of Tris with a rutile surface and how it affects the adsorption of other molecules relevant in biomedical in vitro testing. We show that the interaction of Tris with the rutile surface is strong and significantly affects the interaction of other organic residues with the surface. These strong interactions are compounded by the Tris concentration in the in vitro testing protocol which is much higher compared to other components. Our findings indicate that the kinetics observed in in vitro tests will be strongly influenced by the presence of Tris as a buffering agent when compared to the natural CO2 buffer in blood. These results reveal that considering the so-far neglected active role of Tris in in vitro testing is critically needed and that in vitro protocols using CO2 partial pressure as the buffering agent should yield more reliable results. △ Less

Submitted 15 March, 2021; originally announced March 2021.

Tunnelling of transverse acoustic waves on a silicon chip

Authors: Nicolas P. Mauranyapin, Erick Romero, Rachpon Kalra, Glen Harris, Christopher G. Baker, Warwick P. Bowen

Abstract: Nanomechanical circuits for transverse acoustic waves promise to enable new approaches to computing, precision biochemical sensing and many other applications. However, progress is hampered by the lack of precise control of the coupling between nanomechanical elements. Here, we demonstrate virtual-phonon coupling between transverse mechanical elements, exploiting tunnelling through a zero-mode aco… ▽ More Nanomechanical circuits for transverse acoustic waves promise to enable new approaches to computing, precision biochemical sensing and many other applications. However, progress is hampered by the lack of precise control of the coupling between nanomechanical elements. Here, we demonstrate virtual-phonon coupling between transverse mechanical elements, exploiting tunnelling through a zero-mode acoustic barrier. This allows the construction of large-scale nanomechanical circuits on a silicon chip, for which we develop a new scalable fabrication technique. As example applications, we build mode-selective acoustic mirrors with controllable reflectivity and demonstrate acoustic spatial mode filtering. Our work paves the way towards applications such as fully nanomechanical computer processors and distributed nanomechanical sensors, and to explore the rich landscape of nonlinear nanomechanical dynamics. △ Less

Submitted 24 March, 2021; originally announced March 2021.

Comments: 9 pages, 6 figures

Journal ref: Phys. Rev. Applied 15, 054036 (2021)

Cross-Phase Modulation Instability in PM ANDi Fiber-Based Supercontinuum Generation

Authors: Etienne Genier, Amar N. Ghosh, Swetha Bobba, Patrick Bowen, Peter M. Moselund, Ole Bang, John M. Dudley, Thibaut Sylvestre

Abstract: We demonstrate broadband supercontinuum generation in an all-normal dispersion polarization-maintaining photonic crystal fiber and we report the observation of a cross-phase modulation instability sideband that is generated outside of the supercontinuum bandwidth. We demonstrate this sideband is polarized on the slow axis and can be suppressed by pum** on the fiber's fast axis. We theoretically… ▽ More We demonstrate broadband supercontinuum generation in an all-normal dispersion polarization-maintaining photonic crystal fiber and we report the observation of a cross-phase modulation instability sideband that is generated outside of the supercontinuum bandwidth. We demonstrate this sideband is polarized on the slow axis and can be suppressed by pum** on the fiber's fast axis. We theoretically confirm and model this nonlinear process using phase-matching conditions and numerical simulations, obtaining good agreement with the measured data. △ Less

Submitted 11 August, 2020; originally announced August 2020.

Optically tunable photoluminescence and upconversion lasing on a chip

Authors: Christiaan J. Bekker, Christopher G. Baker, Warwick P. Bowen

Abstract: The ability to tune the wavelength of light emission on a silicon chip is important for scalable photonic networks, distributed photonic sensor networks and next generation computer architectures. Here we demonstrate light emission in a chip-scale optomechanical device, with wide tunablity provided by a combination of radiation pressure and photothermal effects. To achieve this, we develop an opti… ▽ More The ability to tune the wavelength of light emission on a silicon chip is important for scalable photonic networks, distributed photonic sensor networks and next generation computer architectures. Here we demonstrate light emission in a chip-scale optomechanical device, with wide tunablity provided by a combination of radiation pressure and photothermal effects. To achieve this, we develop an optically active double-disk optomechanical system through implantation of erbium ions. We observe frequency tuning of photoluminescence in the telecommunications band with a wavelength range of 520 pm, green upconversion lasing with a threshold of $340\pm 70 \; μ$W, and optomechanical self-pulsing caused by the interplay of radiation pressure and thermal effects. These results provide a path towards widely-tunable micron-scale lasers for photonic networks. △ Less

Submitted 7 April, 2021; v1 submitted 24 July, 2020; originally announced July 2020.

Comments: Main text 7 pages, 5 figures; Appendix 4 pages, 4 figures

Journal ref: Phys. Rev. Applied 15, 034022 (2021)

Ultrafast viscosity measurement with ballistic optical tweezers

Authors: Lars S. Madsen, Muhammad Waleed, Catxere A. Casacio, Alexander B. Stilgoe, Michael A. Taylor, Warwick P. Bowen

Abstract: Viscosity is an important property of out-of-equilibrium systems such as active biological materials and driven non-Newtonian fluids, and for fields ranging from biomaterials to geology, energy technologies and medicine. However, noninvasive viscosity measurements typically require integration times of seconds. Here we demonstrate a four orders-of-magnitude improvement in speed, down to twenty mic… ▽ More Viscosity is an important property of out-of-equilibrium systems such as active biological materials and driven non-Newtonian fluids, and for fields ranging from biomaterials to geology, energy technologies and medicine. However, noninvasive viscosity measurements typically require integration times of seconds. Here we demonstrate a four orders-of-magnitude improvement in speed, down to twenty microseconds, with uncertainty dominated by fundamental thermal noise for the first time. We achieve this using the instantaneous velocity of a trapped particle in an optical tweezer. To resolve the instantaneous velocity we develop a structured-light detection system that allows particle tracking with megahertz bandwidths. Our results translate viscosity from a static averaged property, to one that may be dynamically tracked on the timescales of active dynamics. This opens a pathway to new discoveries in out-of-equilibrium systems, from the fast dynamics of phase transitions, to energy dissipation in motor molecule step**, to violations of fluctuation laws of equilibrium thermodynamics. △ Less

Submitted 28 June, 2020; originally announced July 2020.

Proposal for a quantum traveling Brillouin resonator

Authors: Glen I. Harris, Andreas Sawadsky, Yasmine L. Sfendla, Walter W. Wasserman, Warwick P. Bowen, Christopher G. Baker

Abstract: Brillouin systems operating in the quantum regime have recently been identified as a valuable tool for quantum information technologies and fundamental science. However, reaching the quantum regime is extraordinarily challenging, owing to the stringent requirements of combining low thermal occupation with low optical and mechanical dissipation, and large coherent phonon-photon interactions. Here,… ▽ More Brillouin systems operating in the quantum regime have recently been identified as a valuable tool for quantum information technologies and fundamental science. However, reaching the quantum regime is extraordinarily challenging, owing to the stringent requirements of combining low thermal occupation with low optical and mechanical dissipation, and large coherent phonon-photon interactions. Here, we propose an on-chip liquid based Brillouin system that is predicted to exhibit ultra-high coherent phonon-photon coupling with exceptionally low acoustic dissipation. The system is comprised of a silicon-based "slot" waveguide filled with superfluid helium. This type of waveguide supports optical and acoustical traveling waves, strongly confining both fields into a subwavelength-scale mode volume. It serves as the foundation of an on-chip traveling wave Brillouin resonator with a single photon optomechanical coupling rate exceeding $240$kHz. Such devices may enable applications ranging from ultra-sensitive superfluid-based gyroscopes, to non-reciprocal optical circuits. Furthermore, this platform opens up new possibilities to explore quantum fluid dynamics in a strongly interacting condensate. △ Less

Submitted 8 June, 2020; originally announced June 2020.

Comments: 11 pages, 4 figures, 1 table

Journal ref: Optics Express Vol. 28, Issue 15, pp. 22450-22461 (2020)

Quantum correlations overcome the photodamage limits of light microscopy

Authors: Catxere A. Casacio, Lars S. Madsen, Alex Terrasson, Muhammad Waleed, Kai Barnscheidt, Boris Hage, Michael A. Taylor, Warwick P. Bowen

Abstract: State-of-the-art microscopes use intense lasers that can severely disturb biological processes, function and viability. This introduces hard limits on performance that only quantum photon correlations can overcome. Here we demonstrate this absolute quantum advantage, achieving signal-to-noise beyond the photodamage-free capacity of conventional microscopy. We achieve this in a coherent Raman micro… ▽ More State-of-the-art microscopes use intense lasers that can severely disturb biological processes, function and viability. This introduces hard limits on performance that only quantum photon correlations can overcome. Here we demonstrate this absolute quantum advantage, achieving signal-to-noise beyond the photodamage-free capacity of conventional microscopy. We achieve this in a coherent Raman microscope, which we use to image molecular bonds within a cell with both quantum-enhanced contrast and sub-wavelength resolution. This allows the observation of nanoscale biological structures that would otherwise not be resolved. Coherent Raman microscopes allow highly selective biomolecular finger-printing in unlabelled specimens, but photodamage is a major roadblock for many applications. By showing that this roadblock can be overcome, our work provides a path towards order-of-magnitude improvements in both sensitivity and imaging speed. △ Less

Submitted 12 September, 2020; v1 submitted 31 March, 2020; originally announced April 2020.

Comments: 19 pages, 4+10 figures; revised abstract, fig4 and discussions

Ultra-broadband and sensitive cavity optomechanical magnetometry

Authors: Bei-Bei Li, George Brawley, Hamish Greenall, Stefan Forstner, Eoin Sheridan, Halina Rubinsztein-Dunlop, Warwick P. Bowen

Abstract: Magnetostrictive optomechanical cavities provide a new optically-readout approach to room temperature magnetometry. Here we report ultrasensitive and ultrahigh bandwidth cavity optomechanical magnetometers constructed by embedding a grain of the magnetostrictive material Terfenol-D within a high quality (Q) optical microcavity on a silicon chip. By engineering their physical structure, we achieve… ▽ More Magnetostrictive optomechanical cavities provide a new optically-readout approach to room temperature magnetometry. Here we report ultrasensitive and ultrahigh bandwidth cavity optomechanical magnetometers constructed by embedding a grain of the magnetostrictive material Terfenol-D within a high quality (Q) optical microcavity on a silicon chip. By engineering their physical structure, we achieve a peak sensitivity of 26 pT/Hz^1/2 comparable to the best cryogenic microscale magnetometers, along with a 3~dB bandwidth as high as 11.3 MHz. Two classes of magnetic response are observed, which we postulate arise from the crystallinity of the Terfenol-D. This allows single- and poly-crystalline grains to be distinguished at the level of a single particle. Our results may enable applications such as lab-on-chip nuclear magnetic spectroscopy and magnetic navigation. △ Less

Submitted 22 January, 2020; originally announced February 2020.

Journal ref: Photonics Research 8, 1064-1071 (2020)

Mechanical squeezing via fast continuous measurement

Authors: Chao Meng, George A. Brawley, James S. Bennett, Michael R. Vanner, Warwick P. Bowen

Abstract: We revisit quantum state preparation of an oscillator by continuous linear position measurement. Quite general analytical expressions are derived for the conditioned state of the oscillator. Remarkably, we predict that quantum squeezing is possible outside of both the backaction dominated and quantum coherent oscillation regimes, relaxing experimental requirements even compared to ground-state coo… ▽ More We revisit quantum state preparation of an oscillator by continuous linear position measurement. Quite general analytical expressions are derived for the conditioned state of the oscillator. Remarkably, we predict that quantum squeezing is possible outside of both the backaction dominated and quantum coherent oscillation regimes, relaxing experimental requirements even compared to ground-state cooling. This provides a new way to generate non-classical states of macroscopic mechanical oscillators, and opens the door to quantum sensing and tests of quantum macroscopicity at room temperature. △ Less

Submitted 24 July, 2020; v1 submitted 14 November, 2019; originally announced November 2019.

Journal ref: Phys. Rev. Lett. 125, 043604 (2020)

Engineering the dissipation of crystalline micromechanical resonators

Authors: Erick Romero, Victor M. Valenzuela, Atieh R. Kermany, Leo Sementilli, Francesca Iacopi, Warwick P. Bowen

Abstract: High quality micro- and nano-mechanical resonators are widely used in sensing, communications and timing, and have future applications in quantum technologies and fundamental studies of quantum physics. Crystalline thin-films are particularly attractive for such resonators due to their prospects for high quality, intrinsic stress and yield strength, and low dissipation. However, when grown on a si… ▽ More High quality micro- and nano-mechanical resonators are widely used in sensing, communications and timing, and have future applications in quantum technologies and fundamental studies of quantum physics. Crystalline thin-films are particularly attractive for such resonators due to their prospects for high quality, intrinsic stress and yield strength, and low dissipation. However, when grown on a silicon substrate, interfacial defects arising from lattice mismatch with the substrate have been postulated to introduce additional dissipation. Here, we develop a new backside etching process for single crystal silicon carbide microresonators that allows us to quantitatively verify this prediction. By engineering the geometry of the resonators and removing the defective interfacial layer, we achieve quality factors exceeding a million in silicon carbide trampoline resonators at room temperature, a factor of five higher than without the removal of the interfacial defect layer. We predict that similar devices fabricated from ultrahigh purity silicon carbide and leveraging its high yield strength, could enable room temperature quality factors as high as $6\times10^9$ △ Less

Submitted 20 February, 2020; v1 submitted 9 November, 2019; originally announced November 2019.

Comments: 9 pages 5 figures

Journal ref: Phys. Rev. Applied 13, 044007 (2020)

Strong optical coupling through superfluid Brillouin lasing

Authors: Xin He, Glen I. Harris, Christopher G. Baker, Andreas Sawadsky, Yasmine L. Sfendla, Yauhen P. Sachkou, Stefan Forstner, Warwick P. Bowen

Abstract: Brillouin scattering has applications ranging from signal processing, sensing and microscopy, to quantum information and fundamental science. Most of these applications rely on the electrostrictive interaction between light and phonons. Here we show that in liquids optically-induced surface deformations can provide an alternative and far stronger interaction. This allows the demonstration of ultra… ▽ More Brillouin scattering has applications ranging from signal processing, sensing and microscopy, to quantum information and fundamental science. Most of these applications rely on the electrostrictive interaction between light and phonons. Here we show that in liquids optically-induced surface deformations can provide an alternative and far stronger interaction. This allows the demonstration of ultralow threshold Brillouin lasing and strong phonon-mediated optical coupling for the first time. This form of strong coupling is a key capability for Brillouin-reconfigurable optical switches and circuits, for photonic quantum interfaces, and to generate synthetic electromagnetic fields. While applicable to liquids quite generally, our demonstration uses superfluid helium. Configured as a Brillouin gyroscope this provides the prospect of measuring superfluid circulation with unprecedented precision, and to explore the rich physics of quantum fluid dynamics, from quantized vorticity to quantum turbulence. △ Less

Submitted 15 July, 2019; originally announced July 2019.

Comments: Main text: 6 pages, 4 figures. Supplementary material: 23 pages, 13 figures

Journal ref: Nature Physics 2020

The sounds of science: a symphony for many instruments and voices

Authors: Gerianne Alexander, Roland E. Allen, Anthony Atala, Warwick P. Bowen, Alan A. Coley, John Goodenough, Mikhail Katsnelson, Eugene V. Koonin, Mario Krenn, Lars S. Madsen, Martin Mansson, Nicolas P. Mauranyapin, Ernst Rasel, Linda E. Reich, Roman Yampolskiy, Philip B. Yasskin, Anton Zeilinger, Suzy Lidstrom

Abstract: This paper is a celebration of the frontiers of science. Goodenough, the maestro who transformed energy usage and technology through the invention of the lithium ion battery, opens the programme, reflecting on the ultimate limits of battery technology. This applied theme continues through the subsequent pieces on energy related topics (the sodium ion battery and artificial fuels, by Mansson) and t… ▽ More This paper is a celebration of the frontiers of science. Goodenough, the maestro who transformed energy usage and technology through the invention of the lithium ion battery, opens the programme, reflecting on the ultimate limits of battery technology. This applied theme continues through the subsequent pieces on energy related topics (the sodium ion battery and artificial fuels, by Mansson) and the ultimate challenge for 3 dimensional printing the eventual production of life, by Atala. A passage by Alexander follows, reflecting on a related issue: How might an artificially produced human being behave? Next comes a consideration of consiousness and free will by Allen and Lidstrom. Further voices and new instruments enter as Bowen, Mauranyapin and Madsen discuss whether dynamical processes of single molecules might be observed in their native state. The exploitation of chaos in science and technology, applications of Bose Einstein condensates and a consideration of the significance of entropy follow in pieces by Reichl, Rasel and Allen, respectively. Katsnelson and Koonin then discuss the potential generalisation of thermodynamic concepts in the context of biological evolution. Entering with the music of the cosmos, Yasskin discusses whether we might be able to observe torsion in the geometry of the universe. The crescendo comes with the crisis of singularities, their nature and whether they can be resolved through quantum effects, in the composition of Coley. The climax is Krenn, Melvin and Zeilinger consideration of how computer code can be autonomously surprising and creative. In a harmonious counterpoint, Yampolskiy concludes that such code is not yet able to take responsibility for coauthoring a paper. △ Less

Submitted 5 July, 2019; originally announced July 2019.

Comments: Please send comments and questions to Suzy Lidstrom

Journal ref: Physica Scripta, v95 062501 (2020) [Available open access https://iopscience.iop.org/article/10.1088/1402-4896/ab7a35]

Quantum noise limited nanoparticle detection with exposed-core fiber

Authors: Nicolas P. Mauranyapin, Lars S. Madsen, Larnii Booth, Lu Peng, Stephen C. Warren-Smith, Erik Schartner, Heike Ebendorff-Heidepriem, Warwick P. Bowen

Abstract: Label-free biosensors are important tools for clinical diagnostics and for studying biology at the single molecule level. The development of optical label-free sensors has allowed extreme sensitivity, but can expose the biological sample to photodamage. Moreover, the fragility and complexity of these sensors can be prohibitive to applications. To overcome these problems, we develop a quantum noise… ▽ More Label-free biosensors are important tools for clinical diagnostics and for studying biology at the single molecule level. The development of optical label-free sensors has allowed extreme sensitivity, but can expose the biological sample to photodamage. Moreover, the fragility and complexity of these sensors can be prohibitive to applications. To overcome these problems, we develop a quantum noise limited exposed-core fiber sensor providing robust platform for label-free biosensing with a natural path toward microfluidic integration. We demonstrate the detection of single nanoparticles down to 25 nm in radius with optical intensities beneath known biophysical damage thresholds. △ Less

Submitted 26 April, 2019; originally announced April 2019.

Comments: 11 pages, 6 figures

Experimental and theoretical studies of D + H$_3^+$ $\rightarrow$ H$_2$D$^+$ + H

Authors: Pierre-Michel Hillenbrand, Kyle P. Bowen, Jacques Liévin, Xavier Urbain, Daniel W. Savin

Abstract: Deuterated molecules are important chemical tracers of prestellar and protostellar cores. Up to now, the titular reaction has been assumed to contribute to the generation of these deuterated molecules. We have measured the merged-beams rate coefficient for this reaction as function of the relative collision energy in the range of about 10 meV to 10 eV. By varying the internal temperature of the re… ▽ More Deuterated molecules are important chemical tracers of prestellar and protostellar cores. Up to now, the titular reaction has been assumed to contribute to the generation of these deuterated molecules. We have measured the merged-beams rate coefficient for this reaction as function of the relative collision energy in the range of about 10 meV to 10 eV. By varying the internal temperature of the reacting H$_3^+$ molecules, we found indications for the existence of a reaction barrier. We have performed detailed theoretical calculations for the zero-point-corrected energy profile of the reaction and determined a new value for the barrier height of $\approx$ 68 meV. Furthermore, we have calculated the tunneling probability through the barrier. Our experimental and theoretical results show that the reaction is essentially closed at astrochemically relevant temperatures. We derive a thermal rate coefficient of $<1\times 10^{-12}$ cm$^3$ s$^{-1}$ for temperatures below 75 K with tunneling effects included and below 155 K without tunneling. △ Less

Submitted 5 April, 2019; originally announced April 2019.

Comments: Accepted for publication in ApJ; 21 pages, 7 figures, and 5 table

Journal ref: Astrophys. J. 877 (2019) 38

Kinetics and Mechanism of Metal Nanoparticle Growth via Optical Extinction Spectroscopy and Computational Modeling: The Curious Case of Colloidal Gold

Authors: M. Reza. Andalibi, Alexander Wokaun, Paul Bowen, Andrea Testino

Abstract: An overarching computational framework unifying several optical theories to describe the temporal evolution of gold nanoparticles (GNPs) during a seeded growth process is presented. To achieve this, we used the inexpensive and widely available optical extinction spectroscopy, to obtain quantitative kinetic data. In situ spectra collected over a wide set of experimental conditions were regressed us… ▽ More An overarching computational framework unifying several optical theories to describe the temporal evolution of gold nanoparticles (GNPs) during a seeded growth process is presented. To achieve this, we used the inexpensive and widely available optical extinction spectroscopy, to obtain quantitative kinetic data. In situ spectra collected over a wide set of experimental conditions were regressed using the physical model, calculating light extinction by ensembles of GNPs during the growth process. This model provides temporal information on the size, shape, and concentration of the particles and any electromagnetic interactions between them. Consequently, we were able to describe the mechanism of GNP growth and divide the process into distinct genesis periods. We provide explanations for several longstanding mysteries, for example, the phenomena responsible for the purple-greyish hue during the early stages of GNP growth, the complex interactions between nucleation, growth, and aggregation events, and a clear distinction between agglomeration and electromagnetic interactions. The presented theoretical formalism has been developed in a generic fashion so that it can readily be adapted to other nanoparticulate formation scenarios such as the genesis of various metal nanoparticles. △ Less

Submitted 11 September, 2019; v1 submitted 14 March, 2019; originally announced March 2019.

Comments: Main text and supplementary information (accompanying MATLAB codes available on the journal webpage)

Journal ref: ACS Nano 2019

Coherent vortex dynamics in a strongly-interacting superfluid on a silicon chip

Authors: Yauhen P. Sachkou, Christopher G. Baker, Glen I. Harris, Oliver R. Stockdale, Stefan Forstner, Matthew T. Reeves, Xin He, David L. McAuslan, Ashton S. Bradley, Matthew J. Davis, Warwick P. Bowen

Abstract: Two-dimensional superfluidity and quantum turbulence are directly connected to the microscopic dynamics of quantized vortices. However, surface effects have prevented direct observations of coherent vortex dynamics in strongly-interacting two-dimensional systems. Here, we overcome this challenge by confining a two-dimensional droplet of superfluid helium at microscale on the atomically-smooth surf… ▽ More Two-dimensional superfluidity and quantum turbulence are directly connected to the microscopic dynamics of quantized vortices. However, surface effects have prevented direct observations of coherent vortex dynamics in strongly-interacting two-dimensional systems. Here, we overcome this challenge by confining a two-dimensional droplet of superfluid helium at microscale on the atomically-smooth surface of a silicon chip. An on-chip optical microcavity allows laser-initiation of vortex clusters and nondestructive observation of their decay in a single shot. Coherent dynamics dominate, with thermal vortex diffusion suppressed by six orders-of-magnitude. This establishes a new on-chip platform to study emergent phenomena in strongly-interacting superfluids, test astrophysical dynamics such as those in the superfluid core of neutron stars in the laboratory, and construct quantum technologies such as precision inertial sensors. △ Less

Submitted 7 February, 2019; originally announced February 2019.

Comments: Main text - 12 pages, 4 figures. Supplementary materials - 25 pages, 13 figures

Propagation and imaging of mechanical waves in a highly-stressed single-mode phononic waveguide

Authors: Erick Romero, Rachpon Kalra, Nicolas P. Mauranyapin, Christopher G. Baker, Chao Meng, Warwick P. Bowen

Abstract: We demonstrate a single-mode phononic waveguide that enables robust propagation of mechanical waves. The waveguide is a highly-stressed silicon nitride membrane that supports the propagation of out-of-plane modes. In direct analogy to rectangular microwave waveguides, there exists a band of frequencies over which only the fundamental mode is allowed to propagate, while multiple modes are supported… ▽ More We demonstrate a single-mode phononic waveguide that enables robust propagation of mechanical waves. The waveguide is a highly-stressed silicon nitride membrane that supports the propagation of out-of-plane modes. In direct analogy to rectangular microwave waveguides, there exists a band of frequencies over which only the fundamental mode is allowed to propagate, while multiple modes are supported at higher frequencies. We directly image the mode profiles using optical heterodyne vibration measurement, showing good agreement with theory. In the single-mode frequency band, we show low-loss propagation ($\sim1$~dB/cm) for a $\sim5$~MHz mechanical wave. This design is well suited for phononic circuits interconnecting elements such as non-linear resonators or optomechanical devices for signal processing, sensing or quantum technologies. △ Less

Submitted 11 February, 2019; originally announced February 2019.

Comments: 6 pages, 5 figures

Journal ref: Phys. Rev. Applied 11, 064035 (2019)

Amplitude noise and coherence degradation of femtosecond supercontinuum generation in all-normal-dispersion fibers

Authors: Etienne Genier, Patrick Bowen, Thibaut Sylvestre, John M. Dudley, Peter Moselund, Ole Bang

Abstract: Supercontinuum (SC) generation via femtosecond (fs) pum** in all-normal-dispersion (ANDi) fiber is predicted to offer completely coherent broadening mechanisms, potentially allowing for substantially reduced noise levels in comparison to those obtained when operating in the anomalous dispersion regime. However, previous studies of SC noise typically treat only the quantum noise, typically in the… ▽ More Supercontinuum (SC) generation via femtosecond (fs) pum** in all-normal-dispersion (ANDi) fiber is predicted to offer completely coherent broadening mechanisms, potentially allowing for substantially reduced noise levels in comparison to those obtained when operating in the anomalous dispersion regime. However, previous studies of SC noise typically treat only the quantum noise, typically in the form of one-photon-per-mode noise, and do not consider other technical noise contributions, such as the stability of the pump laser, which become important when the broadening mechanism itself is coherent. In this work, we discuss the influence of the amplitude and pulse length noise of the pump laser, both added separately and combined. We show that for a typical mode-locked laser, in which the peak power and pulse duration are anticorrelated, their combined impact on the SC noise is generally smaller than in isolation. This means that the supercontinuum noise is smaller than the noise of the mode-locked pump laser itself, a fact that was recently observed in experiments but not explained. Our detailed numerical analysis shows that the coherence of ANDi SC generation is considerably reduced on the spectral edges when realistic pump laser noise levels are taken into account. △ Less

Submitted 4 February, 2019; originally announced February 2019.

Journal ref: J. Opt. Soc. Am. B 36, A161-A167 (2019)

Modelling of vorticity, sound and their interaction in two-dimensional superfluids

Authors: Stefan Forstner, Yauhen Sachkou, Matt Woolley, Glen I. Harris, Xin He, Warwick P. Bowen, Christopher G. Baker

Abstract: Vorticity in two-dimensional superfluids is subject to intense research efforts due to its role in quantum turbulence, dissipation and the BKT phase transition. Interaction of sound and vortices is of broad importance in Bose-Einstein condensates and superfluid helium [1-4]. However, both the modelling of the vortex flow field and of its interaction with sound are complicated hydrodynamic problems… ▽ More Vorticity in two-dimensional superfluids is subject to intense research efforts due to its role in quantum turbulence, dissipation and the BKT phase transition. Interaction of sound and vortices is of broad importance in Bose-Einstein condensates and superfluid helium [1-4]. However, both the modelling of the vortex flow field and of its interaction with sound are complicated hydrodynamic problems, with analytic solutions only available in special cases. In this work, we develop methods to compute both the vortex and sound flow fields in an arbitrary two-dimensional domain. Further, we analyse the dispersive interaction of vortices with sound modes in a two-dimensional superfluid and develop a model that quantifies this interaction for any vortex distribution on any two-dimensional bounded domain, possibly non-simply connected, exploiting analogies with fluid dynamics of an ideal gas and electrostatics. As an example application we use this technique to propose an experiment that should be able to unambiguously detect single circulation quanta in a helium thin film. △ Less

Submitted 15 April, 2019; v1 submitted 16 January, 2019; originally announced January 2019.

Comments: 23 pages, 8 figures

Journal ref: New J. Phys. 21, 053029 (2019)

Ultra-low-noise supercontinuum generation with a flat near-zero normal dispersion fiber

Authors: Shreesha Rao D. S., Rasmus D. Engelsholm, Iván B. Gonzalo, Binbin Zhou, Patrick Bowen, Peter M. Moselund, Ole Bang, Morten Bache

Abstract: A pure silica photonic crystal fiber with a group velocity dispersion ($β_2$) of 4 ps$^2$/km at 1.55 $μ$m and less than 7 ps$^2$/km from 1.32 $μ$m to the zero dispersion wavelength (ZDW) 1.80 $μ$m was designed and fabricated. The dispersion of the fiber was measured experimentally and found to agree with the fiber design, which also provides low loss below 1.83 $μ$m due to eight outer rings with i… ▽ More A pure silica photonic crystal fiber with a group velocity dispersion ($β_2$) of 4 ps$^2$/km at 1.55 $μ$m and less than 7 ps$^2$/km from 1.32 $μ$m to the zero dispersion wavelength (ZDW) 1.80 $μ$m was designed and fabricated. The dispersion of the fiber was measured experimentally and found to agree with the fiber design, which also provides low loss below 1.83 $μ$m due to eight outer rings with increased hole diameter. The fiber was pumped with a 1.55 $μ$m, 125 fs laser and, at the maximum in-coupled peak power (P$_0$) of 9 kW, a 1.34$-$1.82 $μ$m low-noise spectrum with a relative intensity noise below 2.2\% was measured. The numerical modeling agreed very well with the experiments and showed that P$_0$ could be increased to 26 kW before noise from solitons above the ZDW started to influence the spectrum by pushing high-noise dispersive waves through the spectrum. △ Less

Submitted 23 April, 2019; v1 submitted 10 December, 2018; originally announced December 2018.

Journal ref: Optics Letters, volume: 44, issue: 9 (May 2019) pp. 2216-2219

Free spectral range electrical tuning of a high quality on-chip microcavity

Authors: Christiaan Bekker, Christopher G. Baker, Rachpon Kalra, Han-Hao Cheng, Bei-Bei Li, Varun Prakash, Warwick P. Bowen

Abstract: Reconfigurable photonic circuits have applications ranging from next-generation computer architectures to quantum networks, coherent radar and optical metamaterials. However, complete reconfigurability is only currently practical on millimetre-scale device footprints. Here, we overcome this barrier by develo** an on-chip high quality microcavity with resonances that can be electrically tuned acr… ▽ More Reconfigurable photonic circuits have applications ranging from next-generation computer architectures to quantum networks, coherent radar and optical metamaterials. However, complete reconfigurability is only currently practical on millimetre-scale device footprints. Here, we overcome this barrier by develo** an on-chip high quality microcavity with resonances that can be electrically tuned across a full free spectral range (FSR). FSR tuning allows resonance with any source or emitter, or between any number of networked microcavities. We achieve it by integrating nanoelectronic actuation with strong optomechanical interactions that create a highly strain-dependent effective refractive index. This allows low voltages and sub-nanowatt power consumption. We demonstrate a basic reconfigurable photonic network, bringing the microcavity into resonance with an arbitrary mode of a microtoroidal optical cavity across a telecommunications fibre link. Our results have applications beyond photonic circuits, including widely tuneable integrated lasers, reconfigurable optical filters for telecommunications and astronomy, and on-chip sensor networks. △ Less

Submitted 20 June, 2018; originally announced August 2018.

Comments: Main text: 7 pages, 3 figures. Supplementary information: 7 pages, 9 figures

Analytical Modeling of a Two-Dimensional Waveguide-Fed Metasurface

Authors: Laura Pulido-Mancera, Mohammadreza F. Imani, Patrick T. Bowen, Nathan Kundtz, David R. Smith

Abstract: We develop a fast, accurate, and robust technique to model the electromagnetic response of a two-dimensional (2D) waveguide-fed metasurface aperture. The geometry under consideration consists of a parallel-plate waveguide with an array of subwavelength, complementary metamaterial elements patterned into one of the conducting surfaces. To determine the radiated field, we model each radiating elemen… ▽ More We develop a fast, accurate, and robust technique to model the electromagnetic response of a two-dimensional (2D) waveguide-fed metasurface aperture. The geometry under consideration consists of a parallel-plate waveguide with an array of subwavelength, complementary metamaterial elements patterned into one of the conducting surfaces. To determine the radiated field, we model each radiating element as a polarizable dipole, and account for mutual interactions among elements via guided and radiated fields by applying a coupled dipole framework. Using full-wave simulations of parallel-plate waveguides with two types of metamaterial elements, we confirm the validity of the proposed coupled dipole model and demonstrate the ability to predict radiation patterns corresponding to arbitrarily arranged elements. We explore the importance of including the mutual coupling among metamaterial elements to arrive at accurate field predictions. The coupled dipole modeling framework presented is scalable to extremely large apertures and can form the foundation for a general, efficient, yet simple aperture analysis and synthesis tool. △ Less

Submitted 30 July, 2018; originally announced July 2018.

Comments: 14 pages, 12 figures

On-chip scalable optomechanical magnetometers

Authors: Bei-Bei Li, Douglas Bulla, Varun Prakash, Stefan Forstner, Ali Dehghan-Manshadi, Halina Rubinsztein-Dunlop, Scott Foster, Warwick P. Bowen

Abstract: The dual-resonant enhancement of mechanical and optical response in cavity optomechanical magnetometers enables precision sensing of magnetic fields. In previous working prototypes of such magnetometers, a cavity optomechanical system is functionalized by manually epoxy-bonding a grain of magnetostrictive material. While this approach allows proof-of-principle demonstrations, practical application… ▽ More The dual-resonant enhancement of mechanical and optical response in cavity optomechanical magnetometers enables precision sensing of magnetic fields. In previous working prototypes of such magnetometers, a cavity optomechanical system is functionalized by manually epoxy-bonding a grain of magnetostrictive material. While this approach allows proof-of-principle demonstrations, practical applications require more scalable and reproducible fabrication pathways. In this work, we scalably fabricate optomechanical magnetometers on a silicon chip, with reproducible performance across different devices, by sputter coating a magnetostrictive film onto high quality toroidal microresonators. Furthermore, we demonstrate that thermally annealing the sputtered film can improve the magnetometer sensitivity by a factor of 6.3. A peak sensitivity of 585 pT/Hz^1/2 is achieved, which is comparable with previously reported results using epoxy-bonding. △ Less

Submitted 25 May, 2018; v1 submitted 24 May, 2018; originally announced May 2018.

Comments: 6 pages, 5 figures

Journal ref: APL Photonics, 3, 120806 (2018)

Precision ultrasound sensing on a chip

Authors: Sahar Basiri-Esfahani, Ardalan Armin, Stefan Forstner, Warwick P. Bowen

Abstract: Ultrasound sensors have wide applications across science and technology. However, improved sensitivity is required for both miniaturisation and increased spatial resolution. Here, we introduce cavity optomechanical ultrasound sensing, where dual optical and mechanical resonances enhance the ultrasound signal. We achieve noise equivalent pressures of 8--300 $μ$Pa/$\sqrt{\rm Hz}$ at kilohertz to meg… ▽ More Ultrasound sensors have wide applications across science and technology. However, improved sensitivity is required for both miniaturisation and increased spatial resolution. Here, we introduce cavity optomechanical ultrasound sensing, where dual optical and mechanical resonances enhance the ultrasound signal. We achieve noise equivalent pressures of 8--300 $μ$Pa/$\sqrt{\rm Hz}$ at kilohertz to megahertz frequencies in a microscale silicon-chip-based sensor with $>$120 dB dynamic range. The sensitivity far exceeds similar sensors that use optical resonance alone and, normalised to sensing area, surpasses previous air-coupled ultrasound sensors by several orders of magnitude. The noise floor is, for the first time, dominated by collisions from molecules in the gas within which the acoustic wave propagates. This new approach to acoustic sensing could find applications ranging from biomedical diagnostics, to autonomous navigation, trace gas sensing, and scientific exploration of the life-induced-vibrations of single cells. △ Less

Submitted 8 October, 2018; v1 submitted 3 May, 2018; originally announced May 2018.

Comments: 50 pages, 15 figures

Quantum enhanced optomechanical magnetometry

Authors: Bei-Bei Li, Jan Bilek, Ulrich B. Hoff, Lars S. Madsen, Stefan Forstner, Varun Prakash, Clemens Schäfermeier, Tobias Gehring, Warwick P. Bowen, Ulrik L. Andersen

Abstract: The resonant enhancement of both mechanical and optical response in microcavity optomechanical devices allows exquisitely sensitive measurements of stimuli such as acceleration, mass and magnetic fields. In this work, we show that quantum correlated light can improve the performance of such sensors, increasing both their sensitivity and their bandwidth. Specifically, we develop a silicon-chip base… ▽ More The resonant enhancement of both mechanical and optical response in microcavity optomechanical devices allows exquisitely sensitive measurements of stimuli such as acceleration, mass and magnetic fields. In this work, we show that quantum correlated light can improve the performance of such sensors, increasing both their sensitivity and their bandwidth. Specifically, we develop a silicon-chip based cavity optomechanical magnetometer that incorporates phase squeezed light to suppress optical shot noise. At frequencies where shot noise is the dominant noise source this allows a 20% improvement in magnetic field sensitivity. Furthermore, squeezed light broadens the range of frequencies at which thermal noise dominates, which has the effect of increasing the overall sensor bandwidth by 50%. These proof-of-principle results open the door to apply quantum correlated light more broadly in chip-scale sensors and devices. △ Less

Submitted 27 February, 2018; originally announced February 2018.

Comments: 8 pages, 5 figures

Journal ref: Optica 5, 850 (2018)