-
DNS of the Early Phase of Oblique Droplet Impact on Thin Films with FS3D
Authors:
Jonathan Lukas Stober,
Johanna Potyka,
Matthias Ibach,
Bernhard Weigand,
Kathrin Schulte
Abstract:
Spray impacts occur in several environmental and technical applications. The impact of droplets at different angles onto walls covered with a thin film of the same liquid can be regarded as an elementary process here. Direct Numerical Simulations (DNS) provide an important contribution to the understanding and modeling of the impact outcome, which might be associated with the formation of a crown…
▽ More
Spray impacts occur in several environmental and technical applications. The impact of droplets at different angles onto walls covered with a thin film of the same liquid can be regarded as an elementary process here. Direct Numerical Simulations (DNS) provide an important contribution to the understanding and modeling of the impact outcome, which might be associated with the formation of a crown and ejection of secondary droplets. Thus, we gain detailed information about, e.g. the flow field and shape of the interface, which are not accessible in experiments. This chapter presents a DNS study of the early crown formation mechanisms present at an oblique droplet impact on a thin film, as well as a grid study showing the resolution required to resolve the impact's details. Highly resolved simulations in large domains require continuous development of the numerical solver's efficiency. The performance of different cycles of the multigrid (MG) solver for the solution of the pressure Poisson equation was compared, and a F-cycle was added. Furthermore, we implemented a hybrid MPI and OpenMP parallelisation, which both increases the scaling limit further. Additionally, studies on the strong and weak scaling are conducted. The choice of the F- and V- cycle in the MG-solver and the additional hybrid parallelisation increased the achieved computed cycles per hour (CPH) by a factor of 12.4 compared to the formerly employed setup. The nodes efficiently usable were increased by a factor of 16. Both, the close to linear scaling regime for the strong scaling and the almost constant performance regime for the weak scaling were increased by this factor.
△ Less
Submitted 29 November, 2023;
originally announced November 2023.
-
Quantum transport through partial barriers in higher-dimensional systems
Authors:
Jonas Stöber,
Arnd Bäcker,
Roland Ketzmerick
Abstract:
Partial transport barriers in the chaotic sea of Hamiltonian systems influence classical transport, as they allow for a small flux between chaotic phase-space regions only. We establish for higher-dimensional systems that quantum transport through such a partial barrier follows a universal transition from quantum suppression to mimicking classical transport. The scaling parameter involves the flux…
▽ More
Partial transport barriers in the chaotic sea of Hamiltonian systems influence classical transport, as they allow for a small flux between chaotic phase-space regions only. We establish for higher-dimensional systems that quantum transport through such a partial barrier follows a universal transition from quantum suppression to mimicking classical transport. The scaling parameter involves the flux, the size of a Planck cell, and the localization length due to dynamical localization along a resonance channel. This is numerically demonstrated for coupled kicked rotors with a partial barrier that generalizes a cantorus to higher dimensions.
△ Less
Submitted 2 August, 2023;
originally announced August 2023.
-
Towards DNS of Droplet-Jet Collisions of Immiscible Liquids with FS3D
Authors:
Johanna Potyka,
Jonathan Stober,
Jonathan Wurst,
Matthias Ibach,
Jonas Steigerwald,
Bernhard Weigand,
Kathrin Schulte
Abstract:
In-air microfluidics became a new method for technical production processes with ultra-high throughput formerly performed in micro channels. Direct Numerical Simulations (DNS) provide a valuable contribution for the fundamental understanding of multiphase flow and later application design. This chapter presents a feasibility study with first DNS results of droplet-jet collisions of immiscible liqu…
▽ More
In-air microfluidics became a new method for technical production processes with ultra-high throughput formerly performed in micro channels. Direct Numerical Simulations (DNS) provide a valuable contribution for the fundamental understanding of multiphase flow and later application design. This chapter presents a feasibility study with first DNS results of droplet-jet collisions of immiscible liquids using the in-house software Free Surface 3D (FS3D). Two cases were investigated with a setup comparable to experiments by Baumgartner et al. [1], where a droplet chain of a glycerol solution hits a jet of silicon oil which encapsulates the droplets. The droplets' shapes present are observed to be more complex than comprehensible from the two-dimensional images from the experiments. Thus, DNS with FS3D can provide additional information like the surface area or the velocity contributions in order to find analytical models of such collision processes in the future. Simulations of such increasingly complex systems require constant improvement of the numerical solver regarding the code's performance. Thus, the red-black Gauss-Seidel smoother in the multi-grid solver, the iterative red-black scheme to compute the viscous forces as well as the momentum advection method were enhanced with a cache- and memory usage optimization. An overall performance gain of up to 33% was obtained for a representative test case.
△ Less
Submitted 21 December, 2022; v1 submitted 19 December, 2022;
originally announced December 2022.
-
Reduced Connectivity for Local Bilinear Jacobi Sets
Authors:
Daniel Klötzl,
Tim Krake,
Youjia Zhou,
Jonathan Stober,
Kathrin Schulte,
Ingrid Hotz,
Bei Wang,
Daniel Weiskopf
Abstract:
We present a new topological connection method for the local bilinear computation of Jacobi sets that improves the visual representation while preserving the topological structure and geometric configuration. To this end, the topological structure of the local bilinear method is utilized, which is given by the nerve complex of the traditional piecewise linear method. Since the nerve complex consis…
▽ More
We present a new topological connection method for the local bilinear computation of Jacobi sets that improves the visual representation while preserving the topological structure and geometric configuration. To this end, the topological structure of the local bilinear method is utilized, which is given by the nerve complex of the traditional piecewise linear method. Since the nerve complex consists of higher-dimensional simplices, the local bilinear method (visually represented by the 1-skeleton of the nerve complex) leads to clutter via crossings of line segments. Therefore, we propose a homotopy-equivalent representation that uses different collapses and edge contractions to remove such artifacts. Our new connectivity method is easy to implement, comes with only little overhead, and results in a less cluttered representation.
△ Less
Submitted 21 December, 2022; v1 submitted 15 August, 2022;
originally announced August 2022.
-
Geometry of complex instability and escape in four-dimensional symplectic maps
Authors:
Jonas Stöber,
Arnd Bäcker
Abstract:
In four-dimensional symplectic maps complex instability of periodic orbits is possible, which cannot occur in the two-dimensional case. We investigate the transition from stable to complex unstable dynamics of a fixed point under parameter variation. The change in the geometry of regular structures is visualized using 3D phase-space slices and in frequency space using the example of two coupled st…
▽ More
In four-dimensional symplectic maps complex instability of periodic orbits is possible, which cannot occur in the two-dimensional case. We investigate the transition from stable to complex unstable dynamics of a fixed point under parameter variation. The change in the geometry of regular structures is visualized using 3D phase-space slices and in frequency space using the example of two coupled standard maps. The chaotic dynamics is studied using escape time plots and by computations of the 2D invariant manifolds associated with the complex unstable fixed point. Based on a normal-form description, we investigate the underlying transport mechanism by visualizing the escape paths and the long-time confinement in the surrounding of the complex unstable fixed point. We find that the escape is governed by the transport along the unstable manifold across invariant planes of the normal-form.
△ Less
Submitted 2 September, 2020;
originally announced September 2020.
-
Regime switching vine copula models for global equity and volatility indices
Authors:
Holger Fink,
Yulia Klimova,
Claudia Czado,
Jakob Stöber
Abstract:
For nearly every major stock market there exist equity and implied volatility indices. These play important roles within finance: be it as a benchmark, a measure of general uncertainty or a way of investing or hedging. It is well known in the academic literature, that correlations and higher moments between different indices tend to vary in time. However, to the best of our knowledge, no one has y…
▽ More
For nearly every major stock market there exist equity and implied volatility indices. These play important roles within finance: be it as a benchmark, a measure of general uncertainty or a way of investing or hedging. It is well known in the academic literature, that correlations and higher moments between different indices tend to vary in time. However, to the best of our knowledge, no one has yet considered a global setup including both, equity and implied volatility indices of various continents, and allowing for a changing dependence structure. We aim to close this gap by applying Markov-switching $R$-vine models to investigate the existence of different, global dependence regimes. In particular, we identify times of "normal" and "abnormal" states within a data set consisting of North-American, European and Asian indices. Our results confirm the existence of joint points in time at which global regime switching takes place.
△ Less
Submitted 19 April, 2016;
originally announced April 2016.
-
Planetary Candidates Observed by Kepler VI: Planet Sample from Q1-Q16 (47 Months)
Authors:
F. Mullally,
Jeffrey L. Coughlin,
Susan E. Thompson,
Jason Rowe,
Christopher Burke,
David W. Latham,
Natalie M. Batalha,
Stephen T. Bryson,
Jessie Christiansen,
Christopher E. Henze,
Aviv Ofir,
Billy Quarles,
Avi Shporer,
Vincent Van Eylen,
Christa Van Laerhoven,
Yash Shah,
Angie Wolfgang,
W. J. Chaplin,
Ji-Wei Xie,
Rachel Akeson,
Vic Argabright,
Eric Bachtell,
Thomas Barclay William J. Borucki,
Douglas A. Caldwell,
Jennifer R. Campbell
, et al. (34 additional authors not shown)
Abstract:
\We present the sixth catalog of Kepler candidate planets based on nearly 4 years of high precision photometry. This catalog builds on the legacy of previous catalogs released by the Kepler project and includes 1493 new Kepler Objects of Interest (KOIs) of which 554 are planet candidates, and 131 of these candidates have best fit radii <1.5 R_earth. This brings the total number of KOIs and planet…
▽ More
\We present the sixth catalog of Kepler candidate planets based on nearly 4 years of high precision photometry. This catalog builds on the legacy of previous catalogs released by the Kepler project and includes 1493 new Kepler Objects of Interest (KOIs) of which 554 are planet candidates, and 131 of these candidates have best fit radii <1.5 R_earth. This brings the total number of KOIs and planet candidates to 7305 and 4173 respectively. We suspect that many of these new candidates at the low signal-to-noise limit may be false alarms created by instrumental noise, and discuss our efforts to identify such objects. We re-evaluate all previously published KOIs with orbital periods of >50 days to provide a consistently vetted sample that can be used to improve planet occurrence rate calculations. We discuss the performance of our planet detection algorithms, and the consistency of our vetting products. The full catalog is publicly available at the NASA Exoplanet Archive.
△ Less
Submitted 6 February, 2015;
originally announced February 2015.
-
Improved Collective Thomson Scattering measurements of fast ions at ASDEX Upgrade
Authors:
J. Rasmussen,
S. K. Nielsen,
M. Stejner,
M. Salewski,
A. S. Jacobsen,
S. B. Korsholm,
F. Leipold,
F. Meo,
P. K. Michelsen,
D. Moseev,
M. Schubert,
J. Stober,
G. Tardini,
D. Wagner,
the ASDEX Upgrade Team
Abstract:
Understanding the behaviour of the confined fast ions is important in both current and future fusion experiments. These ions play a key role in heating the plasma and will be crucial for achieving conditions for burning plasma in next-step fusion devices. Microwave-based Collective Thomson Scattering (CTS) is well suited for reactor conditions and offers such an opportunity by providing measuremen…
▽ More
Understanding the behaviour of the confined fast ions is important in both current and future fusion experiments. These ions play a key role in heating the plasma and will be crucial for achieving conditions for burning plasma in next-step fusion devices. Microwave-based Collective Thomson Scattering (CTS) is well suited for reactor conditions and offers such an opportunity by providing measurements of the confined fast-ion distribution function resolved in space, time and 1D velocity space. We currently operate a CTS system at ASDEX Upgrade using a gyrotron which generates probing radiation at 105 GHz. A new setup using two independent receiver systems has enabled improved subtraction of the background signal, and hence the first accurate characterization of fast-ion properties. Here we review this new dual-receiver CTS setup and present results on fast-ion measurements based on the improved background characterization. These results have been obtained both with and without NBI heating, and with the measurement volume located close to the centre of the plasma. The measurements agree quantitatively with predictions of numerical simulations. Hence, CTS studies of fast-ion dynamics at ASDEX Upgrade are now feasible. The new background subtraction technique could be important for the design of CTS systems in other fusion experiments.
△ Less
Submitted 9 October, 2013;
originally announced October 2013.
-
Simplified Pair Copula Constructions --- Limits and Extensions
Authors:
Jakob Stöber,
Harry Joe,
Claudia Czado
Abstract:
So called pair copula constructions (PCCs), specifying multivariate distributions only in terms of bivariate building blocks (pair copulas), constitute a flexible class of dependence models. To keep them tractable for inference and model selection, the simplifying assumption that copulas of conditional distributions do not depend on the values of the variables which they are conditioned on is popu…
▽ More
So called pair copula constructions (PCCs), specifying multivariate distributions only in terms of bivariate building blocks (pair copulas), constitute a flexible class of dependence models. To keep them tractable for inference and model selection, the simplifying assumption that copulas of conditional distributions do not depend on the values of the variables which they are conditioned on is popular. In this paper, we show for which classes of distributions such a simplification is applicable, significantly extending the discussion of Hobæk Haff et al. (2010). In particular, we show that the only Archimedean copula in dimension d \geq 4 which is of the simplified type is that based on the gamma Laplace transform or its extension, while the Student-t copula is the only one arising from a scale mixture of Normals. Further, we illustrate how PCCs can be adapted for situations where conditional copulas depend on values which are conditioned on.
△ Less
Submitted 22 May, 2012;
originally announced May 2012.
-
Is there significant time-variation in multivariate copulas?
Authors:
Jakob Stöber,
Ulf Schepsmeier
Abstract:
We demonstrate how the uncertainty of parameter point estimates can be assessed in a maximum likelihood framework in order to prevent overfitting and erroneous detection of time-inhomogeneity. The class of models we consider are regular vine (R-vine) copula models, for which we describe a new algorithm for the exact computation of the score function and observed information. R-vine copulas constit…
▽ More
We demonstrate how the uncertainty of parameter point estimates can be assessed in a maximum likelihood framework in order to prevent overfitting and erroneous detection of time-inhomogeneity. The class of models we consider are regular vine (R-vine) copula models, for which we describe a new algorithm for the exact computation of the score function and observed information. R-vine copulas constitute a flexible class of dependence models which are constructed hierarchically from bivariate copulas as building blocks only, and our algorithm exploits the hierarchical nature for subsequent computation of log-likelihood derivatives. Results obtained using the proposed methods are discussed in the context of the asymptotic efficiency of different estimation methods for R-vine based models. In a substantial application to a dataset of exchange rates, we obtain clear indications for time-inhomogeneous dependence between some currency pairs.
△ Less
Submitted 22 May, 2012;
originally announced May 2012.
-
Detecting regime switches in the dependence structure of high dimensional financial data
Authors:
Jakob Stoeber,
Claudia Czado
Abstract:
Misperceptions about extreme dependencies between different financial assets have been an im- portant element of the recent financial crisis. This paper studies inhomogeneity in dependence structures using Markov switching regular vine copulas. These account for asymmetric depen- dencies and tail dependencies in high dimensional data. We develop methods for fast maximum likelihood as well as Bayes…
▽ More
Misperceptions about extreme dependencies between different financial assets have been an im- portant element of the recent financial crisis. This paper studies inhomogeneity in dependence structures using Markov switching regular vine copulas. These account for asymmetric depen- dencies and tail dependencies in high dimensional data. We develop methods for fast maximum likelihood as well as Bayesian inference. Our algorithms are validated in simulations and applied to financial data. We find that regime switches are present in the dependence structure of various data sets and show that regime switching models could provide tools for the accurate description of inhomogeneity during times of crisis.
△ Less
Submitted 9 February, 2012;
originally announced February 2012.
-
Kepler Science Operations
Authors:
Michael R. Haas,
Natalie M. Batalha,
Steve T. Bryson,
Douglas A. Caldwell,
Jessie L. Dotson,
Jennifer Hall,
Jon M. Jenkins,
Todd C. Klaus,
David G. Koch,
Jeffrey Kolodziejczak,
Chris Middour,
Marcie Smith,
Charles K. Sobeck,
Jeremy Stober,
Richard S. Thompson,
Jeffrey E. Van Clev
Abstract:
Kepler's primary mission is a search for earth-size exoplanets in the habitable zone of late-type stars using the transit method. To effectively accomplish this mission, Kepler orbits the Sun and stares nearly continuously at one field-of-view which was carefully selected to provide an appropriate density of target stars. The data transmission rates, operational cycles, and target management req…
▽ More
Kepler's primary mission is a search for earth-size exoplanets in the habitable zone of late-type stars using the transit method. To effectively accomplish this mission, Kepler orbits the Sun and stares nearly continuously at one field-of-view which was carefully selected to provide an appropriate density of target stars. The data transmission rates, operational cycles, and target management requirements implied by this mission design have been optimized and integrated into a comprehensive plan for science operations. The commissioning phase completed all critical tasks and accomplished all objectives within a week of the pre-launch plan. Since starting science, the nominal data collection timeline has been interrupted by two safemode events, several losses of fine point, and some small pointing adjustments. The most important anomalies are understood and mitigated, so Kepler's technical performance metrics have improved significantly over this period and the prognosis for mission success is excellent. The Kepler data archive is established and hosting data for the science team, guest observers, and public. The first data sets to become publicly available include the monthly full-frame images, dropped targets, and individual sources as they are published. Data are released through the archive on a quarterly basis; the Kepler Results Catalog will be released annually starting in 2011.
△ Less
Submitted 3 January, 2010;
originally announced January 2010.