Showing 1–50 of 63 results for author: Regal, C A

Annealing reduces Si$_3$N$_4$ microwave-frequency dielectric loss in superconducting resonators

Authors: Sarang Mittal, Kazemi Adachi, Nicholas E. Frattini, Maxwell D. Urmey, Sheng-Xiang Lin, Alec L. Emser, Cyril Metzger, Luca Talamo, Sarah Dickson, David Carlson, Scott B. Papp, Cindy A. Regal, Konrad W. Lehnert

Abstract: The dielectric loss of silicon nitride (Si$_3$N$_4$) limits the performance of microwave-frequency devices that rely on this material for sensing, signal processing, and quantum communication. Using superconducting resonant circuits, we measure the cryogenic loss tangent of either as-deposited or high-temperature annealed stoichiometric Si$_3$N$_4$ as a function of drive strength and temperature.… ▽ More The dielectric loss of silicon nitride (Si$_3$N$_4$) limits the performance of microwave-frequency devices that rely on this material for sensing, signal processing, and quantum communication. Using superconducting resonant circuits, we measure the cryogenic loss tangent of either as-deposited or high-temperature annealed stoichiometric Si$_3$N$_4$ as a function of drive strength and temperature. The internal loss behavior of the electrical resonators is largely consistent with the standard tunneling model of two-level systems (TLS), including dam** caused by resonant energy exchange with TLS and by the relaxation of non-resonant TLS. We further supplement the TLS model with a self-heating effect to explain an increase in the loss observed in as-deposited films at large drive powers. Critically, we demonstrate that annealing remedies this anomalous power-induced loss, reduces the relaxation-type dam** by more than two orders of magnitude, and reduces the resonant-type dam** by a factor of three. Employing infrared absorption spectroscopy, we find that annealing reduces the concentration of hydrogen in the Si$_3$N$_4$, suggesting that hydrogen impurities cause substantial dissipation. △ Less

Submitted 16 May, 2024; v1 submitted 20 December, 2023; originally announced December 2023.

Comments: 11 pages, 7 figures

Quantum control of continuous systems via nonharmonic potential modulation

Authors: Piotr T. Grochowski, Hannes Pichler, Cindy A. Regal, Oriol Romero-Isart

Abstract: We present a theoretical proposal for preparing and manipulating a state of a single continuous-variable degree of freedom confined to a nonharmonic potential. By utilizing optimally controlled modulation of the potential's position and depth, we demonstrate the generation of non-Gaussian states, including Fock, Gottesman-Kitaev-Preskill, multi-legged-cat, and cubic-phase states, as well as the im… ▽ More We present a theoretical proposal for preparing and manipulating a state of a single continuous-variable degree of freedom confined to a nonharmonic potential. By utilizing optimally controlled modulation of the potential's position and depth, we demonstrate the generation of non-Gaussian states, including Fock, Gottesman-Kitaev-Preskill, multi-legged-cat, and cubic-phase states, as well as the implementation of arbitrary unitaries within a selected two-level subspace. Additionally, we propose protocols for single-shot orthogonal state discrimination, algorithmic cooling, and correcting for nonlinear evolution. We analyze the robustness of this control scheme against noise. Since all the presented protocols rely solely on the precise modulation of the effective nonharmonic potential landscape, they are relevant to several experiments with continuous-variable systems, including the motion of a single particle in an optical tweezer or lattice, or current in circuit quantum electrodynamics. △ Less

Submitted 29 June, 2024; v1 submitted 28 November, 2023; originally announced November 2023.

Comments: 20 pages, 26 figures

Correcting heading errors in optically pumped magnetometers through microwave interrogation

Authors: Chris Kiehl, Thanmay S. Menon, Svenja Knappe, Tobias Thiele, Cindy A. Regal

Abstract: We demonstrate how to measure in-situ for heading errors of optically pumped magnetometers in geomagnetic fields. For this, we implement microwave-driven Rabi oscillations and Ramsey interferometry on hyperfine transitions as two independent methods to detect scalar systematics of free induction decay (FID) signals. We showcase the wide applicability of this technique by operating in the challengi… ▽ More We demonstrate how to measure in-situ for heading errors of optically pumped magnetometers in geomagnetic fields. For this, we implement microwave-driven Rabi oscillations and Ramsey interferometry on hyperfine transitions as two independent methods to detect scalar systematics of free induction decay (FID) signals. We showcase the wide applicability of this technique by operating in the challenging parameter regime of compact vapor cells with imperfect pum** and high buffer gas pressure. In this system, we achieve suppression of large inaccuracies arising from nonlinear Zeeman (NLZ) shifts by up to a factor of 10 to levels below 0.6 nT. In the Ramsey method we accomplish this, even in arbitrary magnetic field directions, by employing a hyper-Ramsey protocol and optical pum** with adiabatic power ramps. For the Rabi technique, this level of accuracy is reached, despite associated drive-dependent shifts, by referencing Rabi frequency measurements to a complete atom-microwave coupling model that incorporates the microwave polarization structure. △ Less

Submitted 17 October, 2023; v1 submitted 17 October, 2023; originally announced October 2023.

Comments: 6 pages, 4 figures + supplementary 16 pages, 10 figures

Direct Measurement of A Spatially Varying Thermal Bath Using Brownian Motion

Authors: Ravid Shaniv, Chris Reetz, Cindy A. Regal

Abstract: Micro-mechanical resonator performance is fundamentally limited by the coupling to a thermal environment. The magnitude of this thermodynamical effect is typically considered in accordance with a physical temperature, assumed to be uniform across the resonator's physical span. However, in some circumstances, e.g. quantum optomechanics or interferometric gravitational wave detection, the temperatur… ▽ More Micro-mechanical resonator performance is fundamentally limited by the coupling to a thermal environment. The magnitude of this thermodynamical effect is typically considered in accordance with a physical temperature, assumed to be uniform across the resonator's physical span. However, in some circumstances, e.g. quantum optomechanics or interferometric gravitational wave detection, the temperature of the resonator may not be uniform, resulting in the resonator being thermally linked to a spatially varying thermal bath. In this case, the link of a mode of interest to its thermal environment is less straightforward to understand. Here, we engineer a distributed bath on a germane optomechanical platform -- a phononic crystal -- and utilize both highly localized and extended resonator modes to probe the spatially varying bath in entirely different bath regimes. As a result, we observe striking differences in the modes' Brownian motion magnitude. From these measurements we are able to reconstruct the local temperature map across our resonator and measure nanoscale effects on thermal conductivity and radiative cooling. Our work explains some thermal phenomena encountered in optomechanical experiments, e.g. mode-dependent heating due to light absorption. Moreover, our work generalizes the typical figure of merit quantifying the coupling of a resonator mode to its thermal environment from the mechanical dissipation to the overlap between the local dissipation and the local temperature throughout the resonator. This added understanding identifies design principles that can be applied to performance of micro-mechanical resonators. △ Less

Submitted 9 May, 2023; originally announced May 2023.

Comments: 12 pages, 4 main figures, 5 appendices figures

Understanding the Quality Factor of Mass-Loaded Tensioned Resonators

Authors: Ravid Shaniv, Sanjay Kumar Keshava, Chris Reetz, Cindy A. Regal

Abstract: Mechanical resonators featuring large tensile stress have enabled a range of experiments in quantum optomechanics and novel sensing. Many sensing applications require functionalizing tensioned resonators by appending additional mass to them. However, this may dramatically change the resonator mode quality factor, and hence its sensitivity. In this work, we investigate the effect of the crossover f… ▽ More Mechanical resonators featuring large tensile stress have enabled a range of experiments in quantum optomechanics and novel sensing. Many sensing applications require functionalizing tensioned resonators by appending additional mass to them. However, this may dramatically change the resonator mode quality factor, and hence its sensitivity. In this work, we investigate the effect of the crossover from no mass load to a large mass load on the mode shape and quality factor of a tensioned resonator. We show through an analytical model and finite element analysis that as the load mass increases, surprisingly, the resonator mode shape becomes independent of the exact load mass, and therefore, its quality factor saturates. We validate this saturation effect experimentally by measuring the quality factor of a silicon nitride trampoline resonator while varying the load mass in a controlled manner. △ Less

Submitted 3 September, 2022; originally announced September 2022.

Comments: 7 pages, 3 figures

Coherence of Rabi oscillations with spin exchange

Authors: Chris Kiehl, Daniel Wagner, Ting-Wei Hsu, Svenja Knappe, Cindy A. Regal, Tobias Thiele

Abstract: Rabi measurements in atomic vapor cells are of current interest in a range of microwave imaging and sensing experiments, but are increasingly in a parameter space outside of theoretical studies of coherence defined by spin-exchange collisions. Here, we study the coherence of Rabi oscillations in vapor cells by employing continuous non-destructive readout of the hyperfine manifold of $^{87}$Rb usin… ▽ More Rabi measurements in atomic vapor cells are of current interest in a range of microwave imaging and sensing experiments, but are increasingly in a parameter space outside of theoretical studies of coherence defined by spin-exchange collisions. Here, we study the coherence of Rabi oscillations in vapor cells by employing continuous non-destructive readout of the hyperfine manifold of $^{87}$Rb using Faraday rotation. We develop a full model for spin-exchange (SE) coherence for hyperfine transitions that takes into account a non-static population distribution. In this regime, Rabi oscillations exhibit nontrivial time-domain signals that allow verification of vapor-cell parameters. We find excellent agreement between theory and experiment, which will aid in benchmarking sensitivities of Rabi measurement applications. △ Less

Submitted 29 July, 2022; originally announced August 2022.

Comments: 6 pages, 4 figures + supplementary 15 pages, 6 figures

Time-of-Flight Quantum Tomography of Single Atom Motion

Authors: M. O. Brown, S. R. Muleady, W. J. Dworschack, R. J. Lewis-Swan, A. M. Rey, O. Romero-Isart, C. A. Regal

Abstract: Time of flight is an intuitive way to determine the velocity of particles and lies at the heart of many capabilities ranging from mass spectrometry to fluid flow measurements. Here we show time-of-flight imaging can realize tomography of a quantum state of motion of a single trapped atom. Tomography of motion requires studying the phase space spanned by both position and momentum. By combining tim… ▽ More Time of flight is an intuitive way to determine the velocity of particles and lies at the heart of many capabilities ranging from mass spectrometry to fluid flow measurements. Here we show time-of-flight imaging can realize tomography of a quantum state of motion of a single trapped atom. Tomography of motion requires studying the phase space spanned by both position and momentum. By combining time-of-flight imaging with coherent evolution of the atom in an optical tweezer trap, we are able to access arbitrary quadratures in phase space without relying on coupling to a spin degree of freedom. To create non-classical motional states, we harness quantum tunneling in the versatile potential landscape of optical tweezers, and our tomography both demonstrates Wigner function negativity and assesses coherence of non-stationary states. Our demonstrated tomography concept has wide applicability to a range of particles and will enable characterization of non-classical states of more complex systems or massive dielectric particles. △ Less

Submitted 7 April, 2022; v1 submitted 6 March, 2022; originally announced March 2022.

Comments: 21 pages, 14 figures. v2 includes Fig 3g typo correction, Fig 14 analysis clarification, reference additions

Optomechanical ground-state cooling in a continuous and efficient electro-optic transducer

Authors: Benjamin M. Brubaker, Jonathan M. Kindem, Maxwell D. Urmey, Sarang Mittal, Robert D. Delaney, Peter S. Burns, Michael R. Vissers, Konrad W. Lehnert, Cindy A. Regal

Abstract: The demonstration of a quantum link between microwave and optical frequencies would be an important step towards the realization of a quantum network of superconducting processors. A major impediment to quantum electro-optic transduction in all platforms explored to date is noise added by thermal occupation of modes involved in the transduction process, and it has proved difficult to realize low t… ▽ More The demonstration of a quantum link between microwave and optical frequencies would be an important step towards the realization of a quantum network of superconducting processors. A major impediment to quantum electro-optic transduction in all platforms explored to date is noise added by thermal occupation of modes involved in the transduction process, and it has proved difficult to realize low thermal occupancy concurrently with other desirable features like high duty cycle and high efficiency. In this work, we present an efficient and continuously operating electro-optomechanical transducer whose mechanical mode has been optically sideband-cooled to its quantum ground state. The transducer achieves a maximum efficiency of 47% and minimum input-referred added noise of 3.2 photons in upconversion. Moreover, the thermal occupancy of the transducer's microwave mode is minimally affected by continuous laser illumination with power more than two orders of magnitude greater than that required for optomechanical ground-state cooling. △ Less

Submitted 26 December, 2021; originally announced December 2021.

Comments: 24 pages, 10 figures

Optomechanics for quantum technologies

Authors: Shabir Barzanjeh, André Xuereb, Simon Gröblacher, Mauro Paternostro, Cindy A Regal, Eva Weig

Abstract: The ability to control the motion of mechanical systems through its interaction with light has opened the door to a plethora of applications in fundamental and applied physics. With experiments routinely reaching the quantum regime, the focus has now turned towards creating and exploiting interesting non-classical states of motion and entanglement in optomechanical systems. Quantumness has also sh… ▽ More The ability to control the motion of mechanical systems through its interaction with light has opened the door to a plethora of applications in fundamental and applied physics. With experiments routinely reaching the quantum regime, the focus has now turned towards creating and exploiting interesting non-classical states of motion and entanglement in optomechanical systems. Quantumness has also shifted from being the very reason why experiments are constructed to becoming a resource for the investigation of fundamental physics and the creation of quantum technologies. Here, by focusing on opto- and electromechanical platforms we review recent progress in quantum state preparation and entanglement of mechanical systems, together with applications to signal processing and transduction, quantum sensing, topological physics, as well as small-scale thermodynamics. △ Less

Submitted 29 November, 2021; originally announced November 2021.

Comments: 15 pages, 150 references. Review article submitted to Nature Physics. Comments very welcome

Journal ref: Nat. Phys. 18, 15 (2022)

Single atom trap** in a metasurface lens optical tweezer

Authors: Ting-Wei Hsu, Wenqi Zhu, Tobias Thiele, Mark O. Brown, Scott B. Papp, Amit Agrawal, Cindy A. Regal

Abstract: Optical metasurfaces of subwavelength pillars have provided new capabilities for the versatile definition of the amplitude, phase, and polarization of light. In this work, we demonstrate that an efficient dielectric metasurface lens can be used to trap and image single neutral atoms with a long working distance from the lens of 3 mm. We characterize the high-numerical-aperture optical tweezers usi… ▽ More Optical metasurfaces of subwavelength pillars have provided new capabilities for the versatile definition of the amplitude, phase, and polarization of light. In this work, we demonstrate that an efficient dielectric metasurface lens can be used to trap and image single neutral atoms with a long working distance from the lens of 3 mm. We characterize the high-numerical-aperture optical tweezers using the trapped atoms and compare with numerical computations of the metasurface lens performance. We predict that future metasurfaces for atom trap** will be able to leverage multiple ongoing developments in metasurface design and enable multifunctional control in complex quantum information experiments with neutral-atoms arrays. △ Less

Submitted 24 December, 2022; v1 submitted 21 October, 2021; originally announced October 2021.

Comments: 11 pages, 6 figures, Add polarization multiplexed lens result in Appendix

Journal ref: PRX Quantum 3, 030316 (2022)

Non-destructive optical readout of a superconducting qubit

Authors: Robert D. Delaney, Maxwell D. Urmey, Sarang Mittal, Benjamin M. Brubaker, Jonathan M. Kindem, Peter S. Burns, Cindy A. Regal, Konrad W. Lehnert

Abstract: Entangling superconducting quantum processors via light would enable new means of secure communication and distributed quantum computing. However, transducing quantum signals between these disparate regimes of the electromagnetic spectrum remains an outstanding goal, and interfacing superconducting qubits with electro-optic transducers presents significant challenges due to the deleterious effects… ▽ More Entangling superconducting quantum processors via light would enable new means of secure communication and distributed quantum computing. However, transducing quantum signals between these disparate regimes of the electromagnetic spectrum remains an outstanding goal, and interfacing superconducting qubits with electro-optic transducers presents significant challenges due to the deleterious effects of optical photons on superconductors. Moreover, many remote entanglement protocols require multiple qubit gates both preceding and following the upconversion of the quantum state, and thus an ideal transducer should leave the state of the qubit unchanged: more precisely, the backaction from the transducer on the qubit should be minimal. Here we demonstrate non-destructive optical readout of a superconducting transmon qubit via a continuously operated electro-optic transducer. The modular nature of the transducer and circuit QED system used in this work enable complete isolation of the qubit from optical photons, and the backaction on the qubit from the transducer is less than that imparted by thermal radiation from the environment. Moderate improvements in transducer bandwidth and added noise will enable us to leverage the full suite of tools available in circuit QED to demonstrate transduction of non-classical signals from a superconducting qubit to the optical domain. △ Less

Submitted 18 October, 2021; originally announced October 2021.

Mechanical Quantum Sensing in the Search for Dark Matter

Authors: Daniel Carney, Gordan Krnjaic, David C. Moore, Cindy A. Regal, Gadi Afek, Sunil Bhave, Benjamin Brubaker, Thomas Corbitt, Jonathan Cripe, Nicole Crisosto, Andrew Geraci, Sohitri Ghosh, Jack G. E. Harris, Anson Hook, Edward W. Kolb, Jonathan Kunjummen, Rafael F. Lang, Tongcang Li, Tongyan Lin, Zhen Liu, Joseph Lykken, Lorenzo Magrini, Jack Manley, Nobuyuki Matsumoto, Alissa Monte , et al. (10 additional authors not shown)

Abstract: Numerous astrophysical and cosmological observations are best explained by the existence of dark matter, a mass density which interacts only very weakly with visible, baryonic matter. Searching for the extremely weak signals produced by this dark matter strongly motivate the development of new, ultra-sensitive detector technologies. Paradigmatic advances in the control and readout of massive mecha… ▽ More Numerous astrophysical and cosmological observations are best explained by the existence of dark matter, a mass density which interacts only very weakly with visible, baryonic matter. Searching for the extremely weak signals produced by this dark matter strongly motivate the development of new, ultra-sensitive detector technologies. Paradigmatic advances in the control and readout of massive mechanical systems, in both the classical and quantum regimes, have enabled unprecedented levels of sensitivity. In this white paper, we outline recent ideas in the potential use of a range of solid-state mechanical sensing technologies to aid in the search for dark matter in a number of energy scales and with a variety of coupling mechanisms. △ Less

Submitted 13 August, 2020; originally announced August 2020.

Comments: White paper/overview based on a workshop held at the Joint Quantum Institute, Maryland. 12 pages, 4 figures, table summarizing many experimental systems, 118 references

Report number: FERMILAB-PUB-20-378-QIS-T

Journal ref: Quantum Sci. Technol. 6 024002, 2021 (invited)

Analysis of membrane phononic crystals with wide bandgaps and low-mass defects

Authors: Chris Reetz, Ran Fischer, Gabriel G. T. Assumpcao, Dylan P. McNally, Peter S. Burns, Jack C. Sankey, Cindy A. Regal

Abstract: We present techniques to model and design membrane phononic crystals with low-mass defects, optimized for force sensing. Further, we identify the importance of the phononic crystal mass contrast as it pertains to the size of acoustic bandgaps and to the dissipation properties of defect modes. In particular, we quantify the tradeoff between high mass contrast phononic crystals with their associated… ▽ More We present techniques to model and design membrane phononic crystals with low-mass defects, optimized for force sensing. Further, we identify the importance of the phononic crystal mass contrast as it pertains to the size of acoustic bandgaps and to the dissipation properties of defect modes. In particular, we quantify the tradeoff between high mass contrast phononic crystals with their associated robust acoustic isolation, and a reduction of soft clam** of the defect mode. We fabricate a set of phononic crystals with a variety of defect geometries out of high stress stoichiometric silicon nitride membranes, and measured at both room temperature and 4 K in order to characterize the dissipative pathways across a variety of geometries. Analysis of these devices highlights a number of design principles integral to the implementation of low-mass, low-dissipation mechanical modes into optomechanical systems. △ Less

Submitted 26 June, 2019; originally announced June 2019.

Comments: 12 pages, 11 figures

Journal ref: Phys. Rev. Applied 12, 044027 (2019)

Spin detection with a micromechanical trampoline: Towards magnetic resonance microscopy harnessing cavity optomechanics

Authors: Ran Fischer, Dylan P. McNally, Chris Reetz, Gabriel G. T. Assumpcao, Thomas R. Knief, Yiheng Lin, Cindy A. Regal

Abstract: We explore the prospects and benefits of combining the techniques of cavity optomechanics with efforts to image spins using magnetic resonance force microscopy (MRFM). In particular, we focus on a common mechanical resonator used in cavity optomechanics -- high-stress stoichiometric silicon nitride (Si$_3$N$_4$) membranes. We present experimental work with a trampoline membrane resonator that has… ▽ More We explore the prospects and benefits of combining the techniques of cavity optomechanics with efforts to image spins using magnetic resonance force microscopy (MRFM). In particular, we focus on a common mechanical resonator used in cavity optomechanics -- high-stress stoichiometric silicon nitride (Si$_3$N$_4$) membranes. We present experimental work with a trampoline membrane resonator that has a quality factor above $10^6$ and an order of magnitude lower mass than a comparable standard membrane resonators. Such high-stress resonators are on a trajectory to reach 0.1 $\rm{aN}/\sqrt{\rm{Hz}}$ force sensitivities at MHz frequencies by using techniques such as soft clam** and phononic-crystal control of acoustic radiation in combination with cryogenic cooling. We present a demonstration of force-detected electron spin resonance of an ensemble at room temperature using the trampoline resonators functionalized with a magnetic grain. We discuss prospects for combining such a resonator with an integrated Fabry-Perot cavity readout at cryogenic temperatures, and provide ideas for future impacts of membrane cavity optomechanical devices on MRFM of nuclear spins. △ Less

Submitted 19 May, 2019; v1 submitted 14 November, 2018; originally announced November 2018.

Comments: 19 pages, 8 figures, 3 tables

Journal ref: New J. Phys. 21, 043049 (2019)

Grey-molasses optical-tweezer loading: Controlling collisions for scaling atom-array assembly

Authors: M. O. Brown, T. Thiele, C. Kiehl, T. -W. Hsu, C. A. Regal

Abstract: We show that with a purely blue-detuned cooling mechanism we can densely load single neutral atoms into large arrays of shallow optical tweezers. With this ability, more efficient assembly of larger ordered arrays will be possible - hence expanding the number of particles available for bottom-up quantum simulation and computation with atoms. Using Lambda-enhanced grey molasses on the D1 line of 87… ▽ More We show that with a purely blue-detuned cooling mechanism we can densely load single neutral atoms into large arrays of shallow optical tweezers. With this ability, more efficient assembly of larger ordered arrays will be possible - hence expanding the number of particles available for bottom-up quantum simulation and computation with atoms. Using Lambda-enhanced grey molasses on the D1 line of 87Rb, we achieve loading into a single 0.63 mK trap with 89% probability, and we further extend this loading to 100 atoms at 80% probability. The loading behavior agrees with a model of consecutive light-assisted collisions in repulsive molecular states. With simple rearrangement that only moves rows and columns of a 2D array, we demonstrate one example of the power of enhanced loading in large arrays. △ Less

Submitted 4 April, 2019; v1 submitted 4 November, 2018; originally announced November 2018.

Comments: 6 pages, 3 figures

Journal ref: Phys. Rev. X 9, 011057 (2019)

Self-calibrating vector atomic magnetometry through microwave polarization reconstruction

Authors: Tobias Thiele, Yiheng Lin, Mark O. Brown, Cindy A. Regal

Abstract: Atomic magnetometry is one of the most sensitive ways to measure magnetic fields. We present a method for converting a naturally scalar atomic magnetometer into a vector magnetometer by exploiting the polarization dependence of hyperfine transitions in rubidium atoms. First, we fully determine the polarization ellipse of an applied microwave field using a self-calibrating method, i.e. a method in… ▽ More Atomic magnetometry is one of the most sensitive ways to measure magnetic fields. We present a method for converting a naturally scalar atomic magnetometer into a vector magnetometer by exploiting the polarization dependence of hyperfine transitions in rubidium atoms. First, we fully determine the polarization ellipse of an applied microwave field using a self-calibrating method, i.e. a method in which the light-atom interaction provides everything required to know the field in an orthogonal laboratory frame. We then measure the direction of an applied static field using the polarization ellipse as a three-dimensional reference defined by Maxwell's equations. Although demonstrated with trapped atoms, this technique could be applied to atomic vapors, or a variety of atom-like systems. △ Less

Submitted 10 July, 2018; originally announced July 2018.

Comments: 5 pages, 3 figures + supplementary 11 pages, 5 figure

Journal ref: Phys. Rev. Lett. 121, 153202 (2018)

The Hong-Ou-Mandel effect with atoms

Authors: A. M. Kaufman, M. C. Tichy, F. Mintert, A. M. Rey, C. A. Regal

Abstract: Controlling light at the level of individual photons has led to advances in fields ranging from quantum information and precision sensing to fundamental tests of quantum mechanics. A central development that followed the advent of single photon sources was the observation of the Hong-Ou- Mandel (HOM) effect, a novel two-photon path interference phenomenon experienced by indistinguishable photons.… ▽ More Controlling light at the level of individual photons has led to advances in fields ranging from quantum information and precision sensing to fundamental tests of quantum mechanics. A central development that followed the advent of single photon sources was the observation of the Hong-Ou- Mandel (HOM) effect, a novel two-photon path interference phenomenon experienced by indistinguishable photons. The effect is now a central technique in the field of quantum optics, harnessed for a variety of applications such as diagnosing single photon sources and creating probabilistic entanglement in linear quantum computing. Recently, several distinct experiments using atomic sources have realized the requisite control to observe and exploit Hong-Ou-Mandel interference of atoms. This article provides a summary of this phenomenon and discusses some of its implications for atomic systems. Transitioning from the domain of photons to atoms opens new perspectives on fundamental concepts, such as the classification of entanglement of identical particles. It aids in the design of novel probes of quantities such as entanglement entropy by combining well established tools of AMO physics - unity single-atom detection, tunable interactions, and scalability - with the Hong-Ou-Mandel interference. Furthermore, it is now possible for established protocols in the photon community, such as measurement-induced entanglement, to be employed in atomic experiments that possess deterministic single-particle production and detection. Hence, the realization of the HOM effect with atoms represents a productive union of central ideas in quantum control of atoms and photons. △ Less

Submitted 17 August, 2018; v1 submitted 15 January, 2018; originally announced January 2018.

Comments: 19 pages, 7 figures

Journal ref: AAMOP Volume 67: Chapter 7, 2018

Measurement-based entanglement of noninteracting bosonic atoms

Authors: Brian J. Lester, Yiheng Lin, Mark O. Brown, Adam M. Kaufman, Randall J. Ball, Emanuel Knill, Ana M. Rey, Cindy A. Regal

Abstract: We demonstrate the ability to extract a spin-entangled state of two neutral atoms via postselection based on a measurement of their spatial configuration. Typically, entangled states of neutral atoms are engineered via atom-atom interactions. In contrast, in our work we use Hong-Ou-Mandel interference to postselect a spin-singlet state after overlap** two atoms in distinct spin states on an effe… ▽ More We demonstrate the ability to extract a spin-entangled state of two neutral atoms via postselection based on a measurement of their spatial configuration. Typically, entangled states of neutral atoms are engineered via atom-atom interactions. In contrast, in our work we use Hong-Ou-Mandel interference to postselect a spin-singlet state after overlap** two atoms in distinct spin states on an effective beam splitter. We verify the presence of entanglement and determine a bound on the postselected fidelity of a spin-singlet state of $\left(0.62 \pm 0.03\right)$. The experiment has direct analogy to creating polarization entanglement with single photons and hence demonstrates the potential to use protocols developed for photons to create complex quantum states with noninteracting atoms. △ Less

Submitted 11 May, 2018; v1 submitted 18 December, 2017; originally announced December 2017.

Comments: 11 pages, 4 figures

Journal ref: Phys. Rev. Lett. 120, 193602 (2018)

Harnessing electro-optic correlations in an efficient mechanical converter

Authors: A. P. Higginbotham, P. S. Burns, M. D. Urmey, R. W. Peterson, N. S. Kampel, B. M. Brubaker, G. Smith, K. W. Lehnert, C. A. Regal

Abstract: An optical network of superconducting quantum bits (qubits) is an appealing platform for quantum communication and distributed quantum computing, but develo** a quantum-compatible link between the microwave and optical domains remains an outstanding challenge. Operating at $T < 100$ mK temperatures, as required for quantum electrical circuits, we demonstrate a mechanically-mediated microwave-opt… ▽ More An optical network of superconducting quantum bits (qubits) is an appealing platform for quantum communication and distributed quantum computing, but develo** a quantum-compatible link between the microwave and optical domains remains an outstanding challenge. Operating at $T < 100$ mK temperatures, as required for quantum electrical circuits, we demonstrate a mechanically-mediated microwave-optical converter with 47$\%$ conversion efficiency, and use a feedforward protocol to reduce added noise to 38 photons. The feedforward protocol harnesses our discovery that noise emitted from the two converter output ports is strongly correlated because both outputs record thermal motion of the same mechanical mode. We also discuss a quantum feedforward protocol that, given high system efficiencies, allows quantum information to be transferred even when thermal phonons enter the mechanical element faster than the electro-optic conversion rate. △ Less

Submitted 17 September, 2019; v1 submitted 18 December, 2017; originally announced December 2017.

Comments: Main text: 7 pages 4 figures. Supplement: 12 pages 7 figures

Journal ref: Nature Physics 14, 1038-1042 (2018)

Population mixing due to dipole-dipole interactions in a 1D array of multilevel atoms

Authors: Ewan Munro, Ana Asenjo-Garcia, Yiheng Lin, Leong Chuan Kwek, Cindy A. Regal, Darrick E. Chang

Abstract: We examine theoretically how dipole-dipole interactions arising from multiple photon scattering lead to a modified distribution of ground state populations in a driven, ordered 1D array of multilevel atoms. Specifically, we devise a level configuration in which a ground-state population accumulated due solely to dipole-dipole interactions can be up to 20\% in regimes accessible to current experime… ▽ More We examine theoretically how dipole-dipole interactions arising from multiple photon scattering lead to a modified distribution of ground state populations in a driven, ordered 1D array of multilevel atoms. Specifically, we devise a level configuration in which a ground-state population accumulated due solely to dipole-dipole interactions can be up to 20\% in regimes accessible to current experiments with neutral atom arrays. For much larger systems, the steady state can consist of an equal distribution of population across the ground state manifold. Our results illustrate how dipole-dipole interactions can be accentuated through interference, and regulated by the geometry of ordered atom arrays. More generally, control techniques for multilevel atoms that can be degraded by multiple scattering, such as optical pum**, will benefit from an improved understanding and control of dipole-dipole interactions available in ordered arrays. △ Less

Submitted 17 September, 2018; v1 submitted 6 December, 2017; originally announced December 2017.

Comments: paper is now identical to published version

Journal ref: Phys. Rev. A 98, 033815 (2018)

Reconfigurable re-entrant cavity for wireless coupling to an electro-optomechanical device

Authors: Tim Menke, Peter S. Burns, Andrew P. Higginbotham, Nir S. Kampel, Robert W. Peterson, Katarina Cicak, Raymond W. Simmonds, Cindy A. Regal, Konrad W. Lehnert

Abstract: An electro-optomechanical device capable of microwave-to-optics conversion has recently been demonstrated, with the vision of enabling optical networks of superconducting qubits. Here we present an improved converter design that uses a three-dimensional (3D) microwave cavity for coupling between the microwave transmission line and an integrated LC resonator on the converter chip. The new design si… ▽ More An electro-optomechanical device capable of microwave-to-optics conversion has recently been demonstrated, with the vision of enabling optical networks of superconducting qubits. Here we present an improved converter design that uses a three-dimensional (3D) microwave cavity for coupling between the microwave transmission line and an integrated LC resonator on the converter chip. The new design simplifies the optical assembly and decouples it from the microwave part of the setup. Experimental demonstrations show that the modular device assembly allows us to flexibly tune the microwave coupling to the converter chip while maintaining small loss. We also find that electromechanical experiments are not impacted by the additional microwave cavity. Our design is compatible with a high-finesse optical cavity and will improve optical performance. △ Less

Submitted 19 March, 2017; originally announced March 2017.

Comments: 6 pages, 4 figures

Journal ref: Review of Scientific Instruments 88, 094701 (2017)

Optical probing of mechanical loss of a Si_{3}N_{4} membrane below 100 mK

Authors: R. Fischer, N. S. Kampel, G. G. T. Assumpção, P. -L. Yu, K. Cicak, R. W. Peterson, R. W. Simmonds, C. A. Regal

Abstract: We report on low mechanical loss in a high-stress silicon nitride (Si_{3}N_{4}) membrane at temperatures below 100 mK. We isolate a membrane via a phononic shield formed within a supporting silicon frame, and measure the mechanical quality factor of a number of high-tension membrane modes as we vary our dilution refrigerator base temperature between 35 mK and 5 K. At the lowest temperatures, we ob… ▽ More We report on low mechanical loss in a high-stress silicon nitride (Si_{3}N_{4}) membrane at temperatures below 100 mK. We isolate a membrane via a phononic shield formed within a supporting silicon frame, and measure the mechanical quality factor of a number of high-tension membrane modes as we vary our dilution refrigerator base temperature between 35 mK and 5 K. At the lowest temperatures, we obtain a maximum quality factor (Q) of 2.3\times10^{8}, corresponding to a Q-frequency product (QFP) of 3.7\times10^{14} Hz. These measurements complement the recent observation of improved quality factors of Si_{3}N_{4} at ultralow temperatures via electrical detection. We also observe a dependence of the quality factor on optical heating of the device. By combining exceptional material properties, high tension, advanced isolation and clam** techniques, high-stress mechanical objects are poised to explore a new regime of exceptional quality factors. Such quality factors combined with an optical probe at cryogenic temperatures will have a direct impact on resonators as quantum objects, as well as force sensors at mK temperatures. △ Less

Submitted 3 November, 2016; originally announced November 2016.

Comments: 4 pages, 3 figures

Improving broadband displacement detection with quantum correlations

Authors: N. S. Kampel, R. W. Peterson, R. Fischer, P. -L. Yu, K. Cicak, R. W. Simmonds, K. W. Lehnert, C. A. Regal

Abstract: Interferometers enable ultrasensitive measurement in a wide array of applications from gravitational wave searches to force microscopes. The role of quantum mechanics in the metrological limits of interferometers has a rich history, and a large number of techniques to surpass conventional limits have been proposed. In a typical measurement configuration, the tradeoff between the probe's shot noise… ▽ More Interferometers enable ultrasensitive measurement in a wide array of applications from gravitational wave searches to force microscopes. The role of quantum mechanics in the metrological limits of interferometers has a rich history, and a large number of techniques to surpass conventional limits have been proposed. In a typical measurement configuration, the tradeoff between the probe's shot noise (imprecision) and its quantum backaction results in what is known as the standard quantum limit (SQL). In this work we investigate how quantum correlations accessed by modifying the readout of the interferometer can access physics beyond the SQL and improve displacement sensitivity. Specifically, we use an optical cavity to probe the motion of a silicon nitride membrane off mechanical resonance, as one would do in a broadband displacement or force measurement, and observe sensitivity better than the SQL dictates for our quantum efficiency. Our measurement illustrates the core idea behind a technique known as \textit{variational readout}, in which the optical readout quadrature is changed as a function of frequency to improve broadband displacement detection. And more generally our result is a salient example of how correlations can aid sensing in the presence of backaction. △ Less

Submitted 7 March, 2017; v1 submitted 22 July, 2016; originally announced July 2016.

Comments: 17 pages, 5 figures

Journal ref: Phys. Rev. X 7, 021008 (2017)

Laser cooling of a micromechanical membrane to the quantum backaction limit

Authors: R. W. Peterson, T. P. Purdy, N. S. Kampel, R. W. Andrews, P. -L. Yu, K. W. Lehnert, C. A. Regal

Abstract: The radiation pressure of light can act to damp and cool the vibrational motion of a mechanical resonator. In understanding the quantum limits of this cooling, one must consider the effect of shot noise fluctuations on the final thermal occupation. In optomechanical sideband cooling in a cavity, the finite Stokes Raman scattering defined by the cavity linewidth combined with shot noise fluctuation… ▽ More The radiation pressure of light can act to damp and cool the vibrational motion of a mechanical resonator. In understanding the quantum limits of this cooling, one must consider the effect of shot noise fluctuations on the final thermal occupation. In optomechanical sideband cooling in a cavity, the finite Stokes Raman scattering defined by the cavity linewidth combined with shot noise fluctuations dictates a quantum backaction limit, analogous to the Doppler limit of atomic laser cooling. In our work we sideband cool to the quantum backaction limit by using a micromechanical membrane precooled in a dilution refrigerator. Monitoring the optical sidebands allows us to directly observe the mechanical object come to thermal equilibrium with the optical bath. △ Less

Submitted 13 October, 2015; originally announced October 2015.

Comments: 13 pages, 3 figures

Journal ref: Phys. Rev. Lett. 116, 063601 (2016)

Entangling two transportable neutral atoms via local spin exchange

Authors: A. M. Kaufman, B. J. Lester, M. Foss-Feig, M. L. Wall, A. M. Rey, C. A. Regal

Abstract: To advance quantum information science a constant pursuit is the search for physical systems that meet the stringent requirements for creating and preserving quantum entanglement. In atomic physics, robust two-qubit entanglement is typically achieved by strong, long-range interactions in the form of Coulomb interactions between ions or dipolar interactions between Rydberg atoms. While these intera… ▽ More To advance quantum information science a constant pursuit is the search for physical systems that meet the stringent requirements for creating and preserving quantum entanglement. In atomic physics, robust two-qubit entanglement is typically achieved by strong, long-range interactions in the form of Coulomb interactions between ions or dipolar interactions between Rydberg atoms. While these interactions allow fast gates, atoms subject to these interactions must overcome the associated coupling to the environment and cross-talk among qubits. Local interactions, such as those requiring significant wavefunction overlap, can alleviate these detrimental effects yet present a new challenge: To distribute entanglement, qubits must be transported, merged for interaction, and then isolated for storage and subsequent operations. Here we show how, via a mobile optical tweezer, it is possible to prepare and locally entangle two ultracold neutral atoms, and then separate them while preserving their entanglement. While ground-state neutral atom experiments have measured dynamics consistent with spin entanglement, and detected entanglement with macroscopic observables, we are now able to demonstrate position-resolved two-particle coherence via application of a local gradient and parity measurements; this new entanglement-verification protocol could be applied to arbitrary spin-entangled states of spatially-separated atoms. The local entangling operation is achieved via ultracold spin-exchange interactions, and quantum tunneling is used to combine and separate atoms. Our toolset provides a framework for dynamically entangling remote qubits via local operations within a large-scale quantum register. △ Less

Submitted 12 November, 2015; v1 submitted 20 July, 2015; originally announced July 2015.

Journal ref: Nature 527, 208-211 (2015)

Rapid production of uniformly-filled arrays of neutral atoms

Authors: Brian J. Lester, Niclas Luick, Adam M. Kaufman, Collin M. Reynolds, Cindy A. Regal

Abstract: We demonstrate rapid loading of a small array of optical tweezers with a single $^{87}$Rb atom per site. We find that loading efficiencies of up to 90% per tweezer are achievable in less than 170 ms for traps separated by more than $1.7 \,μ\text{m}$. Interestingly, we find the load efficiency is affected by nearby traps and present the efficiency as a function of the spacing between two optical tw… ▽ More We demonstrate rapid loading of a small array of optical tweezers with a single $^{87}$Rb atom per site. We find that loading efficiencies of up to 90% per tweezer are achievable in less than 170 ms for traps separated by more than $1.7 \,μ\text{m}$. Interestingly, we find the load efficiency is affected by nearby traps and present the efficiency as a function of the spacing between two optical tweezers. This enhanced loading, combined with subsequent rearranging of filled sites, will enable the study of quantum many-body systems via quantum gas assembly. △ Less

Submitted 14 June, 2015; originally announced June 2015.

Journal ref: Phys. Rev. Lett. 115, 073003 (2015)

Optomechanical Raman-Ratio Thermometry

Authors: T. P. Purdy, P. -L. Yu, N. S. Kampel, R. W. Peterson, K. Cicak, R. W. Simmonds, C. A. Regal

Abstract: The temperature dependence of the asymmetry between Stokes and anti-Stokes Raman scattering can be exploited for self-calibrating, optically-based thermometry. In the context of cavity optomechanics, we observe the cavity-enhanced scattering of light interacting with the standing-wave drumhead modes of a silicon nitride membrane mechanical resonator. The ratio of the amplitude of Stokes to anti-St… ▽ More The temperature dependence of the asymmetry between Stokes and anti-Stokes Raman scattering can be exploited for self-calibrating, optically-based thermometry. In the context of cavity optomechanics, we observe the cavity-enhanced scattering of light interacting with the standing-wave drumhead modes of a silicon nitride membrane mechanical resonator. The ratio of the amplitude of Stokes to anti-Stokes scattered light is used to measure temperatures of optically-cooled mechanical modes down to the level of a few vibrational quanta. We demonstrate that the Raman-ratio technique is able to measure the physical temperature of our device over a range extending from cryogenic temperatures to within an order of magnitude of room temperature. △ Less

Submitted 27 June, 2014; originally announced June 2014.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. A 92, 031802 (2015)

Raman cooling imaging: Detecting single atoms near their ground state of motion

Authors: Brian J. Lester, Adam M. Kaufman, Cindy A. Regal

Abstract: We demonstrate imaging of neutral atoms via the light scattered during continuous Raman sideband cooling. We detect single atoms trapped in optical tweezers while maintaining a significant motional ground-state fraction. The techniques presented provide a framework for single-atom resolved imaging of a broad class of atomic species. We demonstrate imaging of neutral atoms via the light scattered during continuous Raman sideband cooling. We detect single atoms trapped in optical tweezers while maintaining a significant motional ground-state fraction. The techniques presented provide a framework for single-atom resolved imaging of a broad class of atomic species. △ Less

Submitted 22 July, 2014; v1 submitted 23 May, 2014; originally announced May 2014.

Journal ref: Phys. Rev. A 90, 011804(R) (2014)

Tensile strained $In_{x}Ga_{1-x}P$ membranes for cavity optomechanics

Authors: G. D. Cole, P. -L. Yu, C. Gärtner, K. Siquans, R. Moghadas Nia, J. Schmöle, J. Hoelscher-Obermaier, T. P. Purdy, W. Wieczorek, C. A. Regal, M. Aspelmeyer

Abstract: We investigate the optomechanical properties of tensile-strained ternary InGaP nanomembranes grown on GaAs. This material system combines the benefits of highly strained membranes based on stoichiometric silicon nitride, with the unique properties of thin-film semiconductor single crystals, as previously demonstrated with suspended GaAs. Here we employ lattice mismatch in epitaxial growth to impar… ▽ More We investigate the optomechanical properties of tensile-strained ternary InGaP nanomembranes grown on GaAs. This material system combines the benefits of highly strained membranes based on stoichiometric silicon nitride, with the unique properties of thin-film semiconductor single crystals, as previously demonstrated with suspended GaAs. Here we employ lattice mismatch in epitaxial growth to impart an intrinsic tensile strain to a monocrystalline thin film (approximately 30 nm thick). These structures exhibit mechanical quality factors of 2*10^6 or beyond at room temperature and 17 K for eigenfrequencies up to 1 MHz, yielding Q*f products of 2*10^12 Hz for a tensile stress of ~170 MPa. Incorporating such membranes in a high finesse Fabry-Perot cavity, we extract an upper limit to the total optical loss (including both absorption and scatter) of 40 ppm at 1064 nm and room temperature. Further reductions of the In content of this alloy will enable tensile stress levels of 1 GPa, with the potential for a significant increase in the Q*f product, assuming no deterioration in the mechanical loss at this composition and strain level. This materials system is a promising candidate for the integration of strained semiconductor membrane structures with low-loss semiconductor mirrors and for realizing stacks of membranes for enhanced optomechanical coupling. △ Less

Submitted 31 March, 2014; originally announced April 2014.

Comments: 10 pages, 3 figures

Hong-Ou-Mandel atom interferometry in tunnel-coupled optical tweezers

Authors: A. M. Kaufman, B. J. Lester, C. M. Reynolds, M. L. Wall, M. Foss-Feig, K. R. A. Hazzard, A. M. Rey, C. A. Regal

Abstract: The quantum statistics of atoms is typically observed in the behavior of an ensemble via macroscopic observables. However, quantum statistics modifies the behavior of even two particles, inducing remarkable consequences that are at the heart of quantum science. Here we demonstrate near-complete control over all the internal and external degrees of freedom of two laser-cooled 87Rb atoms trapped in… ▽ More The quantum statistics of atoms is typically observed in the behavior of an ensemble via macroscopic observables. However, quantum statistics modifies the behavior of even two particles, inducing remarkable consequences that are at the heart of quantum science. Here we demonstrate near-complete control over all the internal and external degrees of freedom of two laser-cooled 87Rb atoms trapped in two optical tweezers. This full controllability allows us to implement a massive-particle analog of a Hong-Ou-Mandel interferometer where atom tunneling plays the role of a photon beamsplitter. We use the interferometer to probe the effect of quantum statistics on the two-atom dynamics under tunable initial conditions, chosen to adjust the degree of atomic indistinguishability. Our work thereby establishes laser-cooled atoms in optical tweezers as a new route to bottom-up engineering of scalable, low-entropy quantum systems. △ Less

Submitted 16 June, 2014; v1 submitted 26 December, 2013; originally announced December 2013.

Comments: Updated text and figures

Journal ref: Science 345, 306-309 (2014)

A phononic bandgap shield for high-Q membrane microresonators

Authors: P. -L. Yu, K. Cicak, N. S. Kampel, Y. Tsaturyan, T. P. Purdy, R. W. Simmonds, C. A. Regal

Abstract: A phononic crystal can control the acoustic coupling between a resonator and its support structure. We micromachine a phononic bandgap shield for high Q silicon nitride membranes and study the driven displacement spectra of the membranes and their support structures. We find that inside observed bandgaps the density and amplitude of non-membrane modes are greatly suppressed, and membrane modes are… ▽ More A phononic crystal can control the acoustic coupling between a resonator and its support structure. We micromachine a phononic bandgap shield for high Q silicon nitride membranes and study the driven displacement spectra of the membranes and their support structures. We find that inside observed bandgaps the density and amplitude of non-membrane modes are greatly suppressed, and membrane modes are shielded from an external mechanical drive by up to 30 dB. △ Less

Submitted 3 December, 2013; originally announced December 2013.

Comments: 5 pages, 4 figures

Journal ref: Appl. Phys. Lett. 104, 023510 (2014)

Bidirectional and efficient conversion between microwave and optical light

Authors: R. W. Andrews, R. W. Peterson, T. P. Purdy, K. Cicak, R. W. Simmonds, C. A. Regal, K. W. Lehnert

Abstract: Converting low-frequency electrical signals into much higher frequency optical signals has enabled modern communications networks to leverage both the strengths of microfabricated electrical circuits and optical fiber transmission, allowing information networks to grow in size and complexity. A microwave-to-optical converter in a quantum information network could provide similar gains by linking q… ▽ More Converting low-frequency electrical signals into much higher frequency optical signals has enabled modern communications networks to leverage both the strengths of microfabricated electrical circuits and optical fiber transmission, allowing information networks to grow in size and complexity. A microwave-to-optical converter in a quantum information network could provide similar gains by linking quantum processors via low-loss optical fibers and enabling a large-scale quantum network. However, no current technology can convert low-frequency microwave signals into high-frequency optical signals while preserving their fragile quantum state. For this demanding application, a converter must provide a near-unitary transformation between different frequencies; that is, the ideal transformation is reversible, coherent, and lossless. Here we demonstrate a converter that reversibly, coherently, and efficiently links the microwave and optical portions of the electromagnetic spectrum. We use our converter to transfer classical signals between microwave and optical light with conversion efficiencies of ~10%, and achieve performance sufficient to transfer quantum states if the device were further precooled from its current 4 kelvin operating temperature to below 40 millikelvin. The converter uses a mechanically compliant membrane to interface optical light with superconducting microwave circuitry, and this unique combination of technologies may provide a way to link distant nodes of a quantum information network. △ Less

Submitted 11 August, 2014; v1 submitted 19 October, 2013; originally announced October 2013.

Comments: 17 pages and 9 figures; includes supplementary information

Strong Optomechanical Squeezing of Light

Authors: T. P. Purdy, P. -L. Yu, R. W. Peterson, N. S. Kampel, C. A. Regal

Abstract: We create squeezed light by exploiting the quantum nature of the mechanical interaction between laser light and a membrane mechanical resonator embedded in an optical cavity. The radiation pressure shot noise (fluctuating optical force from quantum laser amplitude noise) induces resonator motion well above that of thermally driven motion. This motion imprints a phase shift on the laser light, henc… ▽ More We create squeezed light by exploiting the quantum nature of the mechanical interaction between laser light and a membrane mechanical resonator embedded in an optical cavity. The radiation pressure shot noise (fluctuating optical force from quantum laser amplitude noise) induces resonator motion well above that of thermally driven motion. This motion imprints a phase shift on the laser light, hence correlating the amplitude and phase noise, a consequence of which is optical squeezing. We experimentally demonstrate strong and continuous optomechanical squeezing of 1.7 +/- 0.2 dB below the shot noise level. The peak level of squeezing measured near the mechanical resonance is well described by a model whose parameters are independently calibrated and that includes thermal motion of the membrane with no other classical noise sources. △ Less

Submitted 21 October, 2013; v1 submitted 5 June, 2013; originally announced June 2013.

Comments: 12 pages, 8 figures

Journal ref: Phys. Rev. X 3, 031012 (2013)

Mechanical resonators for storage and transfer of electrical and optical quantum states

Authors: S. A. McGee, D. Meiser, C. A. Regal, K. W. Lehnert, M. J. Holland

Abstract: We study an optomechanical system in which a microwave field and an optical field are coupled to a common mechanical resonator. We explore methods that use these mechanical resonators to store quantum mechanical states and to transduce states between the electromagnetic resonators from the perspective of the effect of mechanical decoherence. Besides being of fundamental interest, this coherent qua… ▽ More We study an optomechanical system in which a microwave field and an optical field are coupled to a common mechanical resonator. We explore methods that use these mechanical resonators to store quantum mechanical states and to transduce states between the electromagnetic resonators from the perspective of the effect of mechanical decoherence. Besides being of fundamental interest, this coherent quantum state transfer could have important practical implications in the field of quantum information science, as it potentially allows one to overcome intrinsic limitations of both microwave and optical platforms. We discuss several state transfer protocols and study their transfer fidelity using a fully quantum mechanical model that utilizes quantum state-diffusion techniques. This work demonstrates that mechanical decoherence should not be an insurmountable obstacle in realizing high fidelity storage and transduction. △ Less

Submitted 29 May, 2013; originally announced May 2013.

Comments: 10 pages, 10 figures

Journal ref: Phys. Rev. A 87, 053818 (2013)

Observation of Radiation Pressure Shot Noise on a Macroscopic Object

Authors: T. P. Purdy, R. W. Peterson, C. A. Regal

Abstract: The quantum mechanics of position measurement of a macroscopic object is typically inaccessible because of strong coupling to the environment and classical noise. Here we monitor a mechanical resonator subject to an increasingly strong continuous position measurement and observe a quantum mechanical backaction force that rises in accordance with the Heisenberg uncertainty limit. For our optically-… ▽ More The quantum mechanics of position measurement of a macroscopic object is typically inaccessible because of strong coupling to the environment and classical noise. Here we monitor a mechanical resonator subject to an increasingly strong continuous position measurement and observe a quantum mechanical backaction force that rises in accordance with the Heisenberg uncertainty limit. For our optically-based position measurements, the backaction takes the form of a fluctuating radiation pressure from the Poisson-distributed photons in the coherent measurement field, termed radiation pressure shot noise. We demonstrate a backaction force that is comparable in magnitude to the thermal forces in our system. Additionally, we observe a temporal correlation between fluctuations in the radiation force and in the position of the resonator. △ Less

Submitted 17 February, 2013; v1 submitted 27 September, 2012; originally announced September 2012.

Comments: 16 pages, 8 figures

Journal ref: Science 339, 801 (2013)

Cooling a single atom in an optical tweezer to its quantum ground state

Authors: Adam M. Kaufman, Brian J. Lester, Cindy A. Regal

Abstract: We report cooling of a single neutral atom to its three-dimensional vibrational ground state in an optical tweezer. After employing Raman sideband cooling for tens of milliseconds, we measure via sideband spectroscopy a three-dimensional ground-state occupation of ~90%. We further observe coherent control of the spin and motional state of the trapped atom. Our demonstration shows that an optical t… ▽ More We report cooling of a single neutral atom to its three-dimensional vibrational ground state in an optical tweezer. After employing Raman sideband cooling for tens of milliseconds, we measure via sideband spectroscopy a three-dimensional ground-state occupation of ~90%. We further observe coherent control of the spin and motional state of the trapped atom. Our demonstration shows that an optical tweezer, formed simply by a tightly focused beam of light, creates sufficient confinement for efficient sideband cooling. This source of ground-state neutral atoms will be instrumental in numerous quantum simulation and logic applications that require a versatile platform for storing and manipulating ultracold single neutral atoms. For example, these results will improve current optical tweezer experiments studying atom-photon coupling and Rydberg quantum logic gates, and could provide new opportunities such as rapid production of single dipolar molecules or quantum simulation in tweezer arrays. △ Less

Submitted 29 November, 2012; v1 submitted 10 September, 2012; originally announced September 2012.

Comments: Updated intro, title

Journal ref: Physical Review X 2, 041014 (2012)

Cavity optomechanics with Si3N4 membranes at cryogenic temperatures

Authors: T. P. Purdy, R. W. Peterson, P. -L. Yu, C. A. Regal

Abstract: We describe a cryogenic cavity-optomechanical system that combines Si3N4 membranes with a mechanically-rigid Fabry-Perot cavity. The extremely high quality-factor frequency products of the membranes allow us to cool a MHz mechanical mode to a phonon occupation of less than 10, starting at a bath temperature of 5 kelvin. We show that even at cold temperatures thermally-occupied mechanical modes of… ▽ More We describe a cryogenic cavity-optomechanical system that combines Si3N4 membranes with a mechanically-rigid Fabry-Perot cavity. The extremely high quality-factor frequency products of the membranes allow us to cool a MHz mechanical mode to a phonon occupation of less than 10, starting at a bath temperature of 5 kelvin. We show that even at cold temperatures thermally-occupied mechanical modes of the cavity elements can be a limitation, and we discuss methods to reduce these effects sufficiently to achieve ground state cooling. This promising new platform should have versatile uses for hybrid devices and searches for radiation pressure shot noise. △ Less

Submitted 31 August, 2012; originally announced August 2012.

Comments: 19 pages, 5 figures, submitted to New Journal of Physics

Journal ref: New J. Phys. 14, 115021 (2012)

Control of Material Dam** in High-Q Membrane Microresonators

Authors: P. -L. Yu, T. P. Purdy, C. A. Regal

Abstract: We study the mechanical quality factors of bilayer aluminum/silicon-nitride membranes. By coating ultrahigh-Q Si3N4 membranes with a more lossy metal, we can precisely measure the effect of material loss on Q's of tensioned resonator modes over a large range of frequencies. We develop a theoretical model that interprets our results and predicts the dam** can be reduced significantly by patternin… ▽ More We study the mechanical quality factors of bilayer aluminum/silicon-nitride membranes. By coating ultrahigh-Q Si3N4 membranes with a more lossy metal, we can precisely measure the effect of material loss on Q's of tensioned resonator modes over a large range of frequencies. We develop a theoretical model that interprets our results and predicts the dam** can be reduced significantly by patterning the metal film. Using such patterning, we fabricate Al-Si3N4 membranes with ultrahigh Q at room temperature. Our work elucidates the role of material loss in the Q of membrane resonators and informs the design of hybrid mechanical oscillators for optical-electrical-mechanical quantum interfaces. △ Less

Submitted 10 January, 2012; v1 submitted 7 November, 2011; originally announced November 2011.

Journal ref: Phys. Rev. Lett. 108, 083603 (2012)

From Cavity Electromechanics to Cavity Optomechanics

Authors: C. A. Regal, K. W. Lehnert

Abstract: We present an overview of experimental work to embed high-Q mesoscopic mechanical oscillators in microwave and optical cavities. Based upon recent progress, the prospect for a broad field of "cavity quantum mechanics" is very real. These systems introduce mesoscopic mechanical oscillators as a new quantum resource and also inherently couple their motion to photons throughout the electromagnetic sp… ▽ More We present an overview of experimental work to embed high-Q mesoscopic mechanical oscillators in microwave and optical cavities. Based upon recent progress, the prospect for a broad field of "cavity quantum mechanics" is very real. These systems introduce mesoscopic mechanical oscillators as a new quantum resource and also inherently couple their motion to photons throughout the electromagnetic spectrum. △ Less

Submitted 19 October, 2010; originally announced October 2010.

Comments: 8 pages, 6 figures, ICAP proceedings submission

Journal ref: J. Phys.: Conf. Ser. 264, 012025 (2011)

Cavity optomechanics using an optically levitated nanosphere

Authors: D. E. Chang, C. A. Regal, S. B. Papp, D. J. Wilson, J. Ye, O. Painter, H. J. Kimble, P. Zoller

Abstract: Recently, remarkable advances have been made in coupling a number of high-Q modes of nano-mechanical systems to high-finesse optical cavities, with the goal of reaching regimes where quantum behavior can be observed and leveraged toward new applications. To reach this regime, the coupling between these systems and their thermal environments must be minimized. Here we propose a novel approach to… ▽ More Recently, remarkable advances have been made in coupling a number of high-Q modes of nano-mechanical systems to high-finesse optical cavities, with the goal of reaching regimes where quantum behavior can be observed and leveraged toward new applications. To reach this regime, the coupling between these systems and their thermal environments must be minimized. Here we propose a novel approach to this problem, in which optically levitating a nano-mechanical system can greatly reduce its thermal contact, while simultaneously eliminating dissipation arising from clam**. Through the long coherence times allowed, this approach potentially opens the door to ground-state cooling and coherent manipulation of a single mesoscopic mechanical system or entanglement generation between spatially separate systems, even in room temperature environments. As an example, we show that these goals should be achievable when the mechanical mode consists of the center-of-mass motion of a levitated nanosphere. △ Less

Submitted 17 September, 2009; v1 submitted 8 September, 2009; originally announced September 2009.

Comments: 33 pages, 6 figures, minor revisions, references added

Journal ref: Proc. Natl. Acad. Sci. USA (2009), online publication doi: 10.1073/pnas.0912969107

Cavity optomechanics with stoichiometric SiN films

Authors: D. J. Wilson, C. A. Regal, S. B. Papp, H. J. Kimble

Abstract: We study high-stress SiN films for reaching the quantum regime with mesoscopic oscillators connected to a room-temperature thermal bath, for which there are stringent requirements on the oscillators' quality factors and frequencies. Our SiN films support mechanical modes with unprecedented products of mechanical quality factor $Q_m$ and frequency $ν_m$ reaching… ▽ More We study high-stress SiN films for reaching the quantum regime with mesoscopic oscillators connected to a room-temperature thermal bath, for which there are stringent requirements on the oscillators' quality factors and frequencies. Our SiN films support mechanical modes with unprecedented products of mechanical quality factor $Q_m$ and frequency $ν_m$ reaching $Q_{m} ν_m \simeq2 \times 10^{13}$ Hz. The SiN membranes exhibit a low optical absorption characterized by Im$(n) \lesssim 10^{-5}$ at 935 nm, representing a 15 times reduction for SiN membranes. We have developed an apparatus to simultaneously cool the motion of multiple mechanical modes based on a short, high-finesse Fabry-Perot cavity and present initial cooling results along with future possibilities. △ Less

Submitted 16 November, 2009; v1 submitted 5 September, 2009; originally announced September 2009.

Comments: 4 pages, 5 figures

Journal ref: Phys. Rev. Lett. 103, 207204 (2009)

Efficient routing of single photons by one atom and a microtoroidal cavity

Authors: Takao Aoki, A. S. Parkins, D. J. Alton, C. A. Regal, Barak Dayan, E. Ostby, K. J. Vahala, H. J. Kimble

Abstract: Single photons from a coherent input are efficiently redirected to a separate output by way of a fiber-coupled microtoroidal cavity interacting with individual Cesium atoms. By operating in an overcoupled regime for the input-output to a tapered fiber, our system functions as a quantum router with high efficiency for photon sorting. Single photons are reflected and excess photons transmitted, as… ▽ More Single photons from a coherent input are efficiently redirected to a separate output by way of a fiber-coupled microtoroidal cavity interacting with individual Cesium atoms. By operating in an overcoupled regime for the input-output to a tapered fiber, our system functions as a quantum router with high efficiency for photon sorting. Single photons are reflected and excess photons transmitted, as confirmed by observations of photon antibunching (bunching) for the reflected (transmitted) light. Our photon router is robust against large variations of atomic position and input power, with the observed photon antibunching persisting for intracavity photon number 0.03 \lesssim n \lesssim 0.7. △ Less

Submitted 7 January, 2009; originally announced January 2009.

Dynamical Backaction of Microwave Fields on a Nanomechanical Oscillator

Authors: J. D. Teufel, J. W. Harlow, C. A. Regal, K. W. Lehnert

Abstract: We measure the response and thermal motion of a high-Q nanomechanical oscillator coupled to a superconducting microwave cavity in the resolved-sideband regime where the oscillator's resonance frequency exceeds the cavity's linewidth. The coupling between the microwave field and mechanical motion is strong enough for radiation pressure to overwhelm the intrinsic mechanical dam**. This radiation… ▽ More We measure the response and thermal motion of a high-Q nanomechanical oscillator coupled to a superconducting microwave cavity in the resolved-sideband regime where the oscillator's resonance frequency exceeds the cavity's linewidth. The coupling between the microwave field and mechanical motion is strong enough for radiation pressure to overwhelm the intrinsic mechanical dam**. This radiation-pressure dam** cools the fundamental mechanical mode by a factor of 5 below the thermal equilibrium temperature in a dilution refrigerator to a phonon occupancy of 140 quanta. △ Less

Submitted 6 November, 2008; v1 submitted 23 July, 2008; originally announced July 2008.

Comments: 4 pages, 4 figures

Journal ref: J. D. Teufel et al, Phys. Rev. Lett. 101, 197203, 2008

Prospects for cooling nanomechanical motion by coupling to a superconducting microwave resonator

Authors: J. D. Teufel, C. A. Regal, K. W. Lehnert

Abstract: Recent theoretical work has shown that radiation pressure effects can in principle cool a mechanical degree of freedom to its ground state. In this paper, we apply this theory to our realization of an opto-mechanical system in which the motion of mechanical oscillator modulates the resonance frequency of a superconducting microwave circuit. We present experimental data demonstrating the large me… ▽ More Recent theoretical work has shown that radiation pressure effects can in principle cool a mechanical degree of freedom to its ground state. In this paper, we apply this theory to our realization of an opto-mechanical system in which the motion of mechanical oscillator modulates the resonance frequency of a superconducting microwave circuit. We present experimental data demonstrating the large mechanical quality factors possible with metallic, nanomechanical beams at 20 mK. Further measurements also show dam** and cooling effects on the mechanical oscillator due to the microwave radiation field. These data motivate the prospects for employing this dynamical backaction technique to cool a mechanical mode entirely to its quantum ground state. △ Less

Submitted 6 November, 2008; v1 submitted 27 March, 2008; originally announced March 2008.

Comments: 6 pages, 6 figures

Journal ref: J. D. Teufel et al, New J. Phys. 10, 095002, 2008

Measuring nanomechanical motion with a microwave cavity interferometer

Authors: C. A. Regal, J. D. Teufel, K. W. Lehnert

Abstract: In recent years microfabricated microwave cavities have been extremely successful in a wide variety of detector applications. In this article we focus this technology on the challenge of quantum-limited displacement detection of a macroscopic object. We measure the displacement of a nanomechanical beam by capacitively coupling its position to the resonant frequency of a superconducting transmiss… ▽ More In recent years microfabricated microwave cavities have been extremely successful in a wide variety of detector applications. In this article we focus this technology on the challenge of quantum-limited displacement detection of a macroscopic object. We measure the displacement of a nanomechanical beam by capacitively coupling its position to the resonant frequency of a superconducting transmission-line microwave cavity. With our device we realize near state-of-the-art mechanical force sensitivity (3 $\rm{aN/\sqrt{Hz}}$) and thus add to only a handful of techniques able to measure thermomechanical motion at 10's of milliKelvin temperatures. Our measurement imprecision reaches a promising 30 times the expected imprecision at the standard quantum limit, and we quantify our ability to extract measurement backaction from our results as well as elucidate the important steps that will be required to progress towards the full quantum limit with this new detector. △ Less

Submitted 7 April, 2008; v1 submitted 11 January, 2008; originally announced January 2008.

Comments: Minor changes and corrections to text and figures; 7 pages, 6 figures

Journal ref: Nature Physics 4, 555 (2008)

The potential energy of a $^{40}$K Fermi gas in the BCS-BEC crossover

Authors: J. T. Stewart, J. P. Gaebler, C. A. Regal, D. S. **

Abstract: We present a measurement of the potential energy of an ultracold trapped gas of $^{40}$K atoms in the BCS-BEC crossover and investigate the temperature dependence of this energy at a wide Feshbach resonance, where the gas is in the unitarity limit. In particular, we study the ratio of the potential energy in the region of the unitarity limit to that of a non-interacting gas, and in the T=0 limit… ▽ More We present a measurement of the potential energy of an ultracold trapped gas of $^{40}$K atoms in the BCS-BEC crossover and investigate the temperature dependence of this energy at a wide Feshbach resonance, where the gas is in the unitarity limit. In particular, we study the ratio of the potential energy in the region of the unitarity limit to that of a non-interacting gas, and in the T=0 limit we extract the universal many-body parameter $β$. We find $β= -0.54^{+0.05}_{-0.12}$; this value is consistent with previous measurements using $^{6}$Li atoms and also with recent theory and Monte Carlo calculations. This result demonstrates the universality of ultracold Fermi gases in the strongly interacting regime. △ Less

Submitted 11 January, 2007; v1 submitted 28 July, 2006; originally announced July 2006.

Journal ref: Phys.Rev.Lett.97:220406,2006

Finite Temperature Momentum Distribution of a Trapped Fermi Gas

Authors: Qi** Chen, C. A. Regal, D. S. **, K. Levin

Abstract: We present measurements of the temperature-dependent momentum distribution of a trapped Fermi gas consisting of $^{40}$K in the BCS-BEC crossover regime. Accompanying theoretical results based upon a simple mean-field ground state are compared to the experimental data. Non-monotonic effects associated with temperature, $T$, arise from the competition between thermal broadening and a narrowing of… ▽ More We present measurements of the temperature-dependent momentum distribution of a trapped Fermi gas consisting of $^{40}$K in the BCS-BEC crossover regime. Accompanying theoretical results based upon a simple mean-field ground state are compared to the experimental data. Non-monotonic effects associated with temperature, $T$, arise from the competition between thermal broadening and a narrowing of the distribution induced by the decrease in the excitation gap $Δ(T)$ with increasing $T$. △ Less

Submitted 20 April, 2006; originally announced April 2006.

Comments: 5 pages, 3 figures

Journal ref: Phys. Rev. A 74, 011601(R) (2006)

Understanding the superfluid phase diagram in trapped Fermi gases

Authors: Qi** Chen, C. A. Regal, M. Greiner, D. S. **, K. Levin

Abstract: Trapped ultracold Fermi gases provide a system that can be tuned between the BCS and BEC regimes by means of a magnetic-field Feshbach resonance. Condensation of fermionic atom pairs in a $^{40}$K gas was demonstrated experimentally by a sweep technique that pairwise projects fermionic atoms onto molecules. In this paper we examine previous data obtained with this technique that probed the phase… ▽ More Trapped ultracold Fermi gases provide a system that can be tuned between the BCS and BEC regimes by means of a magnetic-field Feshbach resonance. Condensation of fermionic atom pairs in a $^{40}$K gas was demonstrated experimentally by a sweep technique that pairwise projects fermionic atoms onto molecules. In this paper we examine previous data obtained with this technique that probed the phase boundary in the temperature-magnetic field plane. Comparison of the $^{40}$K data to a theoretically computed phase diagram demonstrates good agreement between the two. △ Less

Submitted 22 December, 2005; originally announced December 2005.

Comments: 4 pages, 3 figures, submitted to PRA Rapid

Journal ref: Phys. Rev. A 73, 041601(R) (2006)

Momentum distribution of a Fermi gas of atoms in the BCS-BEC crossover

Authors: C. A. Regal, M. Greiner, S. Giorgini, M. Holland, D. S. **

Abstract: We observe dramatic changes in the atomic momentum distribution of a Fermi gas in the region of the BCS-BEC crossover. We study the shape of the momentum distribution and the kinetic energy as a function of interaction strength. The momentum distributions are compared to a mean-field crossover theory, and the kinetic energy is compared to theories for the two weakly interacting limits. The tempe… ▽ More We observe dramatic changes in the atomic momentum distribution of a Fermi gas in the region of the BCS-BEC crossover. We study the shape of the momentum distribution and the kinetic energy as a function of interaction strength. The momentum distributions are compared to a mean-field crossover theory, and the kinetic energy is compared to theories for the two weakly interacting limits. The temperature dependence of the distribution is also presented. △ Less

Submitted 15 August, 2005; v1 submitted 13 July, 2005; originally announced July 2005.

Comments: Includes revisions to Figure 3 and references

Fermi Condensates

Authors: Markus Greiner, Cindy A. Regal, Deborah S. **

Abstract: Ultracold atomic gases have proven to be remarkable model systems for exploring quantum mechanical phenomena. Experimental work on gases of fermionic atoms in particular has seen large recent progress including the attainment of so-called Fermi condensates. In this article we will discuss this recent development and the unique control over interparticle interactions that made it possible. Ultracold atomic gases have proven to be remarkable model systems for exploring quantum mechanical phenomena. Experimental work on gases of fermionic atoms in particular has seen large recent progress including the attainment of so-called Fermi condensates. In this article we will discuss this recent development and the unique control over interparticle interactions that made it possible. △ Less

Submitted 22 February, 2005; originally announced February 2005.

Comments: Proceedings of ICAP-2004 (Rio de Janeiro). Review of Potassium experiment at JILA, Boulder, CO