Showing 1–50 of 55 results for author: Holzwarth, R

Demonstration of quantum network protocols over a 14-km urban fiber link

Authors: Stephan Kucera, Christian Haen, Elena Arenskötter, Tobias Bauer, Jonas Meiers, Marlon Schäfer, Ross Boland, Milad Yahyapour, Maurice Lessing, Ronald Holzwarth, Christoph Becher, Jürgen Eschner

Abstract: We report on the implementation of quantum entanglement distribution and quantum state teleportation over a 14.4-km urban dark-fiber link, which is partially underground, partially overhead, and patched in several stations. We characterize the link for its use as a quantum channel and realize its active polarization stabilization. Using a type-II cavity-enhanced SPDC photon pair source, a $^{40}$C… ▽ More We report on the implementation of quantum entanglement distribution and quantum state teleportation over a 14.4-km urban dark-fiber link, which is partially underground, partially overhead, and patched in several stations. We characterize the link for its use as a quantum channel and realize its active polarization stabilization. Using a type-II cavity-enhanced SPDC photon pair source, a $^{40}$Ca$^{+}$ single-ion quantum memory, and quantum frequency conversion to the telecom C-band, we demonstrate photon-photon entanglement, ion-photon entanglement, and teleportation of a qubit state from the ion onto a remote telecom photon, all realized over the urban fiber link. △ Less

Submitted 7 April, 2024; originally announced April 2024.

Comments: 14 pages, 13 figures, including appendix

Dual-comb dispersion measurement in LiNbO3-on-insulator waveguides at telecom wavelengths

Authors: Halvor R. Fergestad, Wolfgang Haensel, Arne Kordts, Alessandro Prencipe, Ronald Holzwarth, Katia Gallo

Abstract: Photonic integrated circuits are a paramount platform for optoelectronics and nonlinear optics, enabling high confinement nonlinear interactions, where advanced waveguide dispersion engineering can be leveraged to tailor broadband nonlinear processes, supercontinuum generation, soliton formation and joint spectral amplitudes of photon pairs. Accurately measuring dispersion is therefore crucial for… ▽ More Photonic integrated circuits are a paramount platform for optoelectronics and nonlinear optics, enabling high confinement nonlinear interactions, where advanced waveguide dispersion engineering can be leveraged to tailor broadband nonlinear processes, supercontinuum generation, soliton formation and joint spectral amplitudes of photon pairs. Accurately measuring dispersion is therefore crucial for achieving efficient nonlinear and quantum devices. Here we develop a dual comb spectroscopy methodology suitable for dispersion measurements on photonic integrated circuits at telecom wavelengths and apply it to the characterization of lithium niobate on insulator ridge waveguides, map** group velocity dispersion for fundamental TE and TM modes as a function of waveguide top-width. This work paves the way for the broader deployment of dual comb spectroscopy as a characterization tool for a broad range of photonic integrated circuit components on different nanophotonic platforms. △ Less

Submitted 28 December, 2023; originally announced December 2023.

Comments: The following article has been submitted to APL Photonics. After it is published, it will be found at Link

Long-distance chronometric leveling with a transportable optical clock

Authors: J. Grotti, I. Nosske, S. B. Koller, S. Herbers, H. Denker, L. Timmen, G. Vishnyakova, G. Grosche, T. Waterholter, A. Kuhl, S. Koke, E. Benkler, M. Giunta, L. Maisenbacher, A. Matveev, S. Dörscher, R. Schwarz, A. Al-Masoudi, T. W. Hänsch, T. H. Udem, R. Holzwarth, C. Lisdat

Abstract: We have measured the geopotential difference between two locations separated by 457 km by comparison of two optical lattice clocks via an interferometric fiber link, utilizing the gravitational redshift of the clock transition frequency. The $^{87}$Sr clocks have been compared side-by-side before and after one of the clocks was moved to the remote location. The chronometrically measured geopotenti… ▽ More We have measured the geopotential difference between two locations separated by 457 km by comparison of two optical lattice clocks via an interferometric fiber link, utilizing the gravitational redshift of the clock transition frequency. The $^{87}$Sr clocks have been compared side-by-side before and after one of the clocks was moved to the remote location. The chronometrically measured geopotential difference of $3918.1(2.4)\,\mathrm{m^2 \, s^{-2}}$ agrees with an independent geodetic determination of $3915.88(0.30)\,\mathrm{m^2 \, s^{-2}}$. The uncertainty of the chronometric geopotential difference is equivalent to an uncertainty of $24~\mathrm{cm}$ in height. △ Less

Submitted 28 September, 2023; v1 submitted 26 September, 2023; originally announced September 2023.

Light-Driven Nanoscale Vectorial Currents

Authors: Jacob Pettine, Prashant Padmanabhan, Teng Shi, Lauren Gingras, Luke McClintock, Chun-Chieh Chang, Kevin W. C. Kwock, Long Yuan, Yue Huang, John Nogan, Jon K. Baldwin, Peter Adel, Ronald Holzwarth, Abul K. Azad, Filip Ronning, Antoinette J. Taylor, Rohit P. Prasankumar, Shi-Zeng Lin, Hou-Tong Chen

Abstract: Controlled charge flows are fundamental to many areas of science and technology, serving as carriers of energy and information, as probes of material properties and dynamics, and as a means of revealing or even inducing broken symmetries. Emerging methods for light-based current control offer promising routes beyond the speed and adaptability limitations of conventional voltage-driven systems. How… ▽ More Controlled charge flows are fundamental to many areas of science and technology, serving as carriers of energy and information, as probes of material properties and dynamics, and as a means of revealing or even inducing broken symmetries. Emerging methods for light-based current control offer promising routes beyond the speed and adaptability limitations of conventional voltage-driven systems. However, optical generation and manipulation of currents at nanometer spatial scales remains a basic challenge and a crucial step towards scalable optoelectronic systems for microelectronics and information science. Here, we introduce vectorial optoelectronic metasurfaces in which ultrafast light pulses induce local directional charge flows around symmetry-broken plasmonic nanostructures, with tunable responses and arbitrary patterning down to sub-diffractive nanometer scales. Local symmetries and vectorial current distributions are revealed by polarization- and wavelength-sensitive electrical readout and terahertz (THz) emission, while spatially-tailored global currents are demonstrated in the direct generation of elusive broadband THz vector beams. We show that in graphene, a detailed interplay between electrodynamic, thermodynamic, and hydrodynamic degrees of freedom gives rise to rapidly-evolving nanoscale driving forces and charge flows under extreme temporal and spatial confinement. These results set the stage for versatile patterning and optical control over nanoscale currents in materials diagnostics, THz spectroscopies, nano-magnetism, and ultrafast information processing. △ Less

Submitted 21 October, 2023; v1 submitted 21 July, 2023; originally announced July 2023.

Journal ref: Nature 626, 984-989 (2024)

Measuring and characterizing the line profile of HARPS with a laser frequency comb

Authors: Fei Zhao, G. Lo Curto, L. Pasquini, J. I. González Hernández, J. R. De Medeiros, I. C. Leão, B. L. Canto Martins, R. Rebolo, A. Suárez Mascareño, M. Esposito, A. Manescau, T. Steinmetz, T. Udem, R. Probst, R. Holzwarth, G. Zhao

Abstract: Aims. We study the 2D spectral line profile of HARPS (High Accuracy Radial Velocity Planet Searcher), measuring its variation with position across the detector and with changing line intensity. The characterization of the line profile and its variations are important for achieving the precision of the wavelength scales of 10^{-10} or 3.0 cm/s necessary to detect Earth-twins in the habitable zone a… ▽ More Aims. We study the 2D spectral line profile of HARPS (High Accuracy Radial Velocity Planet Searcher), measuring its variation with position across the detector and with changing line intensity. The characterization of the line profile and its variations are important for achieving the precision of the wavelength scales of 10^{-10} or 3.0 cm/s necessary to detect Earth-twins in the habitable zone around solar-like stars. Methods. We used a laser frequency comb (LFC) with unresolved and unblended lines to probe the instrument line profile. We injected the LFC light (attenuated by various neutral density filters) into both the object and the reference fibres of HARPS, and we studied the variations of the line profiles with the line intensities. We applied moment analysis to measure the line positions, widths, and skewness as well as to characterize the line profile distortions induced by the spectrograph and detectors. Based on this, we established a model to correct for point spread function distortions by tracking the beam profiles in both fibres. Results. We demonstrate that the line profile varies with the position on the detector and as a function of line intensities. This is consistent with a charge transfer inefficiency (CTI) effect on the HARPS detector. The estimate of the line position depends critically on the line profile, and therefore a change in the line amplitude effectively changes the measured position of the lines, affecting the stability of the wavelength scale of the instrument. We deduce and apply the correcting functions to re-calibrate and mitigate this effect, reducing it to a level consistent with photon noise. △ Less

Submitted 6 November, 2020; originally announced November 2020.

Comments: 9 pages, 6 figures, 3 tables, accepted

Journal ref: A&A 645, A23 (2021)

The solar gravitational redshift from HARPS-LFC Moon spectra. A test of the General Theory of Relativity

Authors: J. I. González Hernández, R. Rebolo, L. Pasquini, G. Lo Curto, P. Molaro, E. Caffau, H. -G. Ludwig, M. Steffen, M. Esposito, A. Suárez Mascareño, B. Toledo-Padrón, R. A. Probst, T. W. Hänsch, R. Holzwarth, A. Manescau, T. Steinmetz, Th. Udem, T. Wilken

Abstract: The General Theory of Relativity predicts the redshift of spectral lines in the solar photosphere, as a consequence of the gravitational potential of the Sun. This effect can be measured from a solar disk-integrated flux spectrum of the Sun's reflected light on solar system bodies. The laser frequency comb (LFC) calibration system attached to the HARPS spectrograph offers the possibility to perfor… ▽ More The General Theory of Relativity predicts the redshift of spectral lines in the solar photosphere, as a consequence of the gravitational potential of the Sun. This effect can be measured from a solar disk-integrated flux spectrum of the Sun's reflected light on solar system bodies. The laser frequency comb (LFC) calibration system attached to the HARPS spectrograph offers the possibility to perform an accurate measurement of the solar gravitational redshift (GRS) by observing the Moon or other solar system bodies. We have analysed the line shift observed in Fe absorption lines from five high-quality HARPS-LFC spectra of the Moon. We select an initial sample of 326 photospheric Fe lines in the spectral range 476-585 nm and measure their line positions and equivalent widths (EWs). Accurate line shifts are derived from the wavelength position of the core of the lines compared with the laboratory wavelengths. We fit the observed spectral Fe lines using CO$^5$BOLD 3D synthetic profiles. Convective motions in the solar photosphere do not affect the line cores of Fe lines stronger than about $\sim 150$ mA. In our sample, only 15 FeI lines have EWs in the range $150 <$ EW(mA) $< 550$, providing a measurement of the solar GRS at $639\pm14$ ${\rm m\;s^{-1}}$, consistent with the expected theoretical value on Earth of $\sim 633.1$ ${\rm m\;s^{-1}}$. A final sample of about 97 weak Fe lines with EW $<180$ mA allows us to derive a mean global line shift of $638\pm6$ ${\rm m\;s^{-1}}$ in agreement with the theoretical solar GRS. These are the most accurate measurements of the solar GRS so far. Ultrastable spectrographs calibrated with the LFC over a larger spectral range, such as HARPS or ESPRESSO, together with a further improvement on the laboratory wavelengths, could provide a more robust measurement of the solar GRS and further tests for the 3D hydrodynamical models. △ Less

Submitted 2 October, 2020; v1 submitted 22 September, 2020; originally announced September 2020.

Comments: Accepted for publication in Astronomy & Astrophysics

Journal ref: A&A 643, A146 (2020)

Performance Verification of the EXtreme PREcision Spectrograph

Authors: Ryan T. Blackman, Debra A. Fischer, Colby A. Jurgenson, David Sawyer, Tyler M. McCracken, Andrew E. Szymkowiak, Ryan R. Petersburg, J. M. Joel Ong, John M. Brewer, Lily L. Zhao, Christopher Leet, Lars A. Buchhave, René Tronsgaard, Joe Llama, Travis Sawyer, Allen B. Davis, Samuel H. C. Cabot, Michael Shao, Russell Trahan, Bijan Nemati, Matteo Genoni, Giorgio Pariani, Marco Riva, Rafael A. Probst, Ronald Holzwarth , et al. (3 additional authors not shown)

Abstract: The EXtreme PREcision Spectrograph (EXPRES) is a new Doppler spectrograph designed to reach a radial velocity measurement precision sufficient to detect Earth-like exoplanets orbiting nearby, bright stars. We report on extensive laboratory testing and on-sky observations to quantitatively assess the instrumental radial velocity measurement precision of EXPRES, with a focused discussion of individu… ▽ More The EXtreme PREcision Spectrograph (EXPRES) is a new Doppler spectrograph designed to reach a radial velocity measurement precision sufficient to detect Earth-like exoplanets orbiting nearby, bright stars. We report on extensive laboratory testing and on-sky observations to quantitatively assess the instrumental radial velocity measurement precision of EXPRES, with a focused discussion of individual terms in the instrument error budget. We find that EXPRES can reach a single-measurement instrument calibration precision better than 10 cm/s, not including photon noise from stellar observations. We also report on the performance of the various environmental, mechanical, and optical subsystems of EXPRES, assessing any contributions to radial velocity error. For atmospheric and telescope related effects, this includes the fast tip-tilt guiding system, atmospheric dispersion compensation, and the chromatic exposure meter. For instrument calibration, this includes the laser frequency comb (LFC), flat-field light source, CCD detector, and effects in the optical fibers. Modal noise is mitigated to a negligible level via a chaotic fiber agitator, which is especially important for wavelength calibration with the LFC. Regarding detector effects, we empirically assess the impact on radial velocity precision due to pixel-position non-uniformities (PPNU) and charge transfer inefficiency (CTI). EXPRES has begun its science survey to discover exoplanets orbiting G-dwarf and K-dwarf stars, in addition to transit spectroscopy and measurements of the Rossiter-McLaughlin effect. △ Less

Submitted 19 March, 2020; originally announced March 2020.

Comments: 39 pages, 30 figures, accepted to AJ

A crucial test for astronomical spectrograph calibration with frequency combs

Authors: Rafael A. Probst, Dinko Milaković, Borja Toledo-Padrón, Gaspare Lo Curto, Gerardo Avila, Anna Brucalassi, Bruno L. Canto Martins, Izan de Castro Leão, Massimiliano Esposito, Jonay I. González Hernández, Frank Grupp, Theodor W. Hänsch, Hanna Kellermann, Florian Kerber, Olaf Mandel, Antonio Manescau, Eszter Pozna, Rafael Rebolo, José Renan de Medeiros, Tilo Steinmetz, Alejandro Suárez Mascareño, Thomas Udem, Josefina Urrutia, Yuanjie Wu, Luca Pasquini , et al. (1 additional authors not shown)

Abstract: Laser frequency combs (LFCs) are well on their way to becoming the next-generation calibration sources for precision astronomical spectroscopy. This development is considered key in the hunt for low-mass rocky exoplanets around solar-type stars whose discovery with the radial-velocity method requires cm/s Doppler precision. In order to prove such precise calibration with an LFC, it must be compare… ▽ More Laser frequency combs (LFCs) are well on their way to becoming the next-generation calibration sources for precision astronomical spectroscopy. This development is considered key in the hunt for low-mass rocky exoplanets around solar-type stars whose discovery with the radial-velocity method requires cm/s Doppler precision. In order to prove such precise calibration with an LFC, it must be compared to another calibrator of at least the same precision. Being the best available spectrograph calibrator, this means comparing it to a second - fully independent - LFC. This test had long been pending, but our installation of two LFCs at the ultra-stable spectrograph HARPS presented the so far unique opportunity for simultaneous calibrations with two separate LFCs. Although limited in time, the test results confirm the 1 cm/s stability that has long been anticipated by the astronomical community. △ Less

Submitted 20 February, 2020; originally announced February 2020.

Comments: 22 pages, 14 figures. View the Nature Astronomy publication under https://rdcu.be/b1tMB . Nature Astronomy article available under https://www.nature.com/articles/s41550-020-1010-x

Journal ref: Nature Astronomy (2020)

Quantum cascade laser-pumped terahertz molecular lasers: frequency noise and phase-locking using a 1560nm frequency comb

Authors: Jean-Francois Lampin, Antoine Pagies, Giorgio Santarelli, Jeffrey Hesler, Wolfgang Hänsel, Ronald Holzwarth, Stefano Barbieri

Abstract: The recent demonstration of a terahertz (THz) molecular gas laser pumped by a mid-infrared quantum cascade laser (QCL) has opened up new perspectives for this family of sources, traditionally relying on CO2-laser pum**. A so far open question concerning QCL-pumped THz molecular lasers (MLs) is related to their spectral purity. Indeed, assessing their frequency/phase noise is crucial for a number… ▽ More The recent demonstration of a terahertz (THz) molecular gas laser pumped by a mid-infrared quantum cascade laser (QCL) has opened up new perspectives for this family of sources, traditionally relying on CO2-laser pum**. A so far open question concerning QCL-pumped THz molecular lasers (MLs) is related to their spectral purity. Indeed, assessing their frequency/phase noise is crucial for a number of applications potentially exploiting these sources as local oscillators. Here this question is addressed by reporting the measurement of the frequency noise power spectral density (PSD) of a THz ML pumped by a 10.3μm-wavelength QCL, and emitting 1mW at 1.1THz in continuous wave. This is achieved by beating the ML frequency with the 1080th harmonic of the repetition rate of a 1560nm frequency comb. We find a frequency noise PSD < 10Hz2/Hz (-95dBc/Hz) at 100kHz from the carrier. To demonstrate the effect of the stability of the pump laser on the spectral purity of the THz emission we also measure the frequency noise PSD of a CO2-laser-pumped 2.5THz ML, reaching 0.1Hz2/Hz (-105dBc/Hz) at 40kHz from the carrier, limited by the frequency noise of the frequency comb harmonic. Finally, we show that it is possible to actively phase-lock the QCL-pumped molecular laser to the frequency comb repetition rate harmonic by controlling the QCL current, demonstrating a sub-Hz linewidth. △ Less

Submitted 15 November, 2019; originally announced November 2019.

Nanophotonic supercontinuum based mid-infrared dual-comb spectroscopy

Authors: Hairun Guo, Wenle Weng, Junqiu Liu, Fan Yang, Wolfgang Hansel, Camille Sophie Bres, Luc Thevenaz, Ronald Holzwarth, Tobias J. Kippenberg

Abstract: High resolution and fast detection of molecular vibrational absorption is important for organic synthesis, pharmaceutical process and environmental monitoring, and is enabled by mid-infrared (mid-IR) laser frequency combs via dual-comb spectroscopy. Here, we demonstrate a novel and highly simplified approach to broadband mid-IR dual-comb spectroscopy via supercontinuum generation, achieved using u… ▽ More High resolution and fast detection of molecular vibrational absorption is important for organic synthesis, pharmaceutical process and environmental monitoring, and is enabled by mid-infrared (mid-IR) laser frequency combs via dual-comb spectroscopy. Here, we demonstrate a novel and highly simplified approach to broadband mid-IR dual-comb spectroscopy via supercontinuum generation, achieved using unprecedented nanophotonic dispersion engineering that allows for flat-envelope, ultra-broadband mid-IR comb spectra. The mid-IR dual-comb has an instantaneous bandwidth covering the functional group region from 2800-3600 1/cm, comprising more than 100,000 comb lines, enabling parallel gas-phase detection with a high sensitivity, spectral resolution, and speed. In addition to the traditional functional groups, their isotopologues are also resolved in the supercontinuum based dual-comb spectroscopy. Our approach combines well established fiber laser combs, digital coherent data averaging, and integrated nonlinear photonics, each in itself a state-of-the-art technology, signalling the emergence of mid-IR dual-comb spectroscopy for use outside of the protected laboratory environment. △ Less

Submitted 2 August, 2019; originally announced August 2019.

Journal ref: Optica Vol. 7, Issue 9, pp. 1181-1188 (2020)

InfraRed Astronomy Satellite Swarm Interferometry (IRASSI): Overview and Study Results

Authors: Hendrik Linz, Divya Bhatia, Luisa Buinhas, Matthias Lezius, Eloi Ferrer, Roger Förstner, Kathrin Frankl, Mathias Philips-Blum, Meiko Steen, Ulf Bestmann, Wolfgang Hänsel, Ronald Holzwarth, Oliver Krause, Thomas Pany

Abstract: The far-infrared (FIR) is one of the few wavelength ranges where no astronomical data with sub-arcsec resolution exist yet. Neither of the medium-term satellite projects like SPICA, Millimetron or OST will resolve this malady. Information at high spatial and spectral resolution in the FIR, taken from atomic fine-structure lines, highly excited CO, and especially from water lines would, however, op… ▽ More The far-infrared (FIR) is one of the few wavelength ranges where no astronomical data with sub-arcsec resolution exist yet. Neither of the medium-term satellite projects like SPICA, Millimetron or OST will resolve this malady. Information at high spatial and spectral resolution in the FIR, taken from atomic fine-structure lines, highly excited CO, and especially from water lines would, however, open the door for transformative science. This calls for interferometric concepts. We present first results of our feasibility study IRASSI (Infrared Astronomy Satellite Swarm Interferometry) for a FIR space interferometer. Extending on the principal concept of the ESPRIT study, it features heterodyne interferometry within a swarm of 5 satellite elements. The satellites can drift in and out within a range of several hundred meters, thereby achieving spatial resolutions of <0.1" over the whole wavelength range of 1-6 THz. Precise knowledge on the baselines will be ensured by metrology methods employing laser-based optical frequency combs, for which preliminary ground-based tests have been designed by us. We first show how the science requirements translate into operational and design parameters. We have put much emphasis on the navigational aspects of such a free-flying satellite swarm operating in relatively close vicinity. We hence present work on the formation geometry, the relative dynamics of the swarm, and aspects of our investigation towards attitude estimation. Furthermore, we discuss issues regarding the real-time capability of the autonomous relative positioning system, which is an important aspect for IRASSI where, due to the large raw data rates expected, the interferometric correlation has to be done onboard. We also address questions regarding the spacecraft architecture and how a thermomechanical model is used to study the effect of thermal perturbations on the spacecraft. (abridged) △ Less

Submitted 18 July, 2019; originally announced July 2019.

Comments: 43 pages (preprint format), 10 figures, 6 tables; in press, to appear in Advances in Space Research, Special Issue on Space-VLBI (eds. Leonid Gurvits et al.)

Optical clock intercomparison with $6\times 10^{-19}$ precision in one hour

Authors: E. Oelker, R. B. Hutson, C. J. Kennedy, L. Sonderhouse, T. Bothwell, A. Goban, D. Kedar, C. Sanner, J. M. Robinson, G. E. Marti, D. G. Matei, T. Legero, M. Giunta, R. Holzwarth, F. Riehle, U. Sterr, J. Ye

Abstract: Improvements in atom-light coherence are foundational to progress in quantum information science, quantum optics, and precision metrology. Optical atomic clocks require local oscillators with exceptional optical coherence due to the challenge of performing spectroscopy on their ultra-narrow linewidth clock transitions. Advances in laser stabilization have thus enabled rapid progress in clock preci… ▽ More Improvements in atom-light coherence are foundational to progress in quantum information science, quantum optics, and precision metrology. Optical atomic clocks require local oscillators with exceptional optical coherence due to the challenge of performing spectroscopy on their ultra-narrow linewidth clock transitions. Advances in laser stabilization have thus enabled rapid progress in clock precision. A new class of ultrastable lasers based on cryogenic silicon reference cavities has recently demonstrated the longest optical coherence times to date. In this work we utilize such a local oscillator, along with a state-of-the-art frequency comb for coherence transfer, with two Sr optical lattice clocks to achieve an unprecedented level of clock stability. Through an anti-synchronous comparison, the fractional instability of both clocks is assessed to be $4.8\times 10^{-17}/\sqrtτ$ for an averaging time $τ$ in seconds. Synchronous interrogation reveals a quantum projection noise dominated instability of $3.5(2)\times10^{-17}/\sqrtτ$, resulting in a precision of $5.8(3)\times 10^{-19}$ after a single hour of averaging. The ability to measure sub-$10^{-18}$ level frequency shifts in such short timescales will impact a wide range of applications for clocks in quantum sensing and fundamental physics. For example, this precision allows one to resolve the gravitational red shift from a 1 cm elevation change in only 20 minutes. △ Less

Submitted 7 February, 2019; originally announced February 2019.

Journal ref: Nature Photonics 13, 714-719 (2019)

Convective blueshifts in the solar atmosphere: III. High-accuracy observations of spectral lines in the visible

Authors: Johannes Löhner-Böttcher, Wolfgang Schmidt, Rolf Schlichenmaier, Tilo Steinmetz, Ronald Holzwarth

Abstract: Convective motions in the solar atmosphere cause spectral lines to become asymmetric and shifted in wavelength. For photospheric lines, this differential Doppler shift varies from the solar disk center to the limb. Precise and comprehensive observations of the convective blueshift and its center-to-limb variation improve our understanding of the atmospheric hydrodynamics and ensuing line formation… ▽ More Convective motions in the solar atmosphere cause spectral lines to become asymmetric and shifted in wavelength. For photospheric lines, this differential Doppler shift varies from the solar disk center to the limb. Precise and comprehensive observations of the convective blueshift and its center-to-limb variation improve our understanding of the atmospheric hydrodynamics and ensuing line formation, and provide the basis to refine 3D models of the solar atmosphere. We performed systematical spectroscopic measurements of the convective blueshift of the quiet Sun with the Laser Absolute Reference Spectrograph (LARS) at the German Vacuum Tower Telescope. The spatial scanning of the solar disk covered four radial (meridional and equatorial) axes. The high-resolution spectra of 26 photospheric to chromospheric lines in the visible range were calibrated with a laser frequency comb to absolute wavelengths at the 1m/s accuracy. Applying ephemeris and reference corrections, the bisector analysis provided line asymmetries and Doppler shifts with an uncertainty of only few m/s. To allow for a comparison with other observations, we convolved the results to lower spectral resolutions. Typically, a blueshifted "C"-shaped curve at disk center transforms into a less blueshifted "\"-shape toward the solar limb. The comparison of all lines reveals the systematic dependence of the convective blueshift on the line depth. Synthetic models yield considerable deviations from the observed center-to-limb variation. The obtained Doppler shifts of the quiet Sun can serve as an absolute reference for other observations, the relative calibration of Dopplergrams, and the necessary refinement of atmospheric models. Based on this, the development of high-precision models of stellar surface convection will advance the detection of (potentially habitable) exoplanets by radial velocity measurements. △ Less

Submitted 22 January, 2019; originally announced January 2019.

Journal ref: A&A 624, A57 (2019)

Convective blueshifts in the solar atmosphere II. High-accuracy observations of the Fe i 6173.3Å line and deviations of full-disk Dopplergrams

Authors: Franziska Stief, Johannes Löhner-Böttcher, Wolfgang Schmidt, Tilo Steinmetz, Ronald Holzwarth

Abstract: Granular convective motions reach into the lower solar atmosphere, typically causing photospheric spectral lines to exhibit a differential line shift. This Doppler shift to shorter wavelength is commonly known as convective blueshift. We performed systematic observations of the quiet Sun with the Laser Absolute Reference Spectrograph (LARS) at the German Vacuum Tower Telescope. The solar disk was… ▽ More Granular convective motions reach into the lower solar atmosphere, typically causing photospheric spectral lines to exhibit a differential line shift. This Doppler shift to shorter wavelength is commonly known as convective blueshift. We performed systematic observations of the quiet Sun with the Laser Absolute Reference Spectrograph (LARS) at the German Vacuum Tower Telescope. The solar disk was scanned along the meridian and the equator, from the disk center toward the limb. The solar spectrum around 6173Å was calibrated with a laser frequency comb on an absolute wavelength scale with an accuracy of a few m/s. We applied a bisector analysis on the spectral lines to reveal the changes of convective blueshift and line asymmetry at different heliocentric positions. Being a signature for convective motions, the bisector curve of Fe i 6173.3Å describes a C-shape at disk center. When approaching the solar limb, the bisector transforms into a \-shape. The analysis of the time- and bisector-averaged line shifts yields three distinct results. Firstly, the center-to-limb variation of Doppler velocities measured with LARS reveals a significant discrepancy (up to 200m/s) to the full-disk Dopplergrams of the Helioseismic and Magnetic Imager (HMI). Secondly, we obtained a significant decrease of convective blueshift toward the solar limb. Thirdly, the line-of-sight effect of solar activity leads to a scatter of up to 100m/s at intermediate heliocentric positions. The accurate observation of the absolute convective blueshift with LARS allows the identification of systematic discrepancy with Doppler velocities measured by HMI. The center-to-limb variation of HMI suffers from an additional blueshift toward the limb that is incompatible with our results. LARS measurements can be taken as reference for the correction of systematic errors in the synoptic HMI Dopplergrams. △ Less

Submitted 21 November, 2018; originally announced November 2018.

Comments: 9 pages, 9 figures

Journal ref: A&A 622, A34 (2019)

Absolute velocity measurements in sunspot umbrae

Authors: J. Löhner-Böttcher, W. Schmidt, R. Schlichenmaier, H. -P. Doerr, T. Steinmetz, R. Holzwarth

Abstract: In sunspot umbrae, convection is largely suppressed by the strong magnetic field. Previous measurements reported on negligible convective flows in umbral cores. Based on this, numerous studies have taken the umbra as zero reference to calculate Doppler velocities of the ambient active region. To clarify the amount of convective motion in the darkest part of umbrae, we directly measured Doppler vel… ▽ More In sunspot umbrae, convection is largely suppressed by the strong magnetic field. Previous measurements reported on negligible convective flows in umbral cores. Based on this, numerous studies have taken the umbra as zero reference to calculate Doppler velocities of the ambient active region. To clarify the amount of convective motion in the darkest part of umbrae, we directly measured Doppler velocities with an unprecedented accuracy and precision. We performed spectroscopic observations of sunspot umbrae with the Laser Absolute Reference Spectrograph (LARS) at the German Vacuum Tower Telescope. A laser frequency comb enabled the calibration of the high-resolution spectrograph and absolute wavelength positions. A thorough spectral calibration, including the measurement of the reference wavelength, yielded Doppler shifts of the spectral line Ti i 5713.9 Å with an uncertainty of around 5 m s-1. The measured Doppler shifts are a composition of umbral convection and magneto-acoustic waves. For the analysis of convective shifts, we temporally average each sequence to reduce the superimposed wave signal. Compared to convective blueshifts of up to -350 m s-1 in the quiet Sun, sunspot umbrae yield a strongly reduced convective blueshifts around -30 m s-1. {W}e find that the velocity in a sunspot umbra correlates significantly with the magnetic field strength, but also with the umbral temperature defining the depth of the titanium line. The vertical upward motion decreases with increasing field strength. Extrapolating the linear approximation to zero magnetic field reproduces the measured quiet Sun blueshift. Simply taking the sunspot umbra as a zero velocity reference for the calculation of photospheric Dopplergrams can imply a systematic velocity error. △ Less

Submitted 23 April, 2018; originally announced April 2018.

Comments: 10 pages, 7 figures, 2 tables, Appendix with 5 figures

Journal ref: A&A 617, A19 (2018)

Convective blueshifts in the solar atmosphere, I. Absolute measurements with LARS of the spectral lines at 6302 Å

Authors: Johannes Löhner-Böttcher, Wolfgang Schmidt, Franziska Stief, Tilo Steinmetz, Ronald Holzwarth

Abstract: The solar convection manifests as granulation and intergranulation at the solar surface. In the photosphere, convective motions induce differential Doppler shifts to spectral lines. The observed convective blueshift varies across the solar disk. We focus on the impact of solar convection on the atmosphere and aim to resolve its velocity stratification in the photosphere. We performed high-resoluti… ▽ More The solar convection manifests as granulation and intergranulation at the solar surface. In the photosphere, convective motions induce differential Doppler shifts to spectral lines. The observed convective blueshift varies across the solar disk. We focus on the impact of solar convection on the atmosphere and aim to resolve its velocity stratification in the photosphere. We performed high-resolution spectroscopic observations of the solar spectrum in the 6302\,Å range with the Laser Absolute Reference Spectrograph (LARS) at the Vacuum Tower Telescope. A laser frequency comb enabled the calibration of the spectra to an absolute wavelength scale with an accuracy of ${\rm 1\,m\,s^{-1}}$. We systematically scanned the Quiet Sun from disk center to the limb at ten selected heliocentric positions. The analysis included 99 time sequences of up to 20\,min in length. By means of ephemeris and reference corrections, we translated wavelength shifts into absolute line-of-sight velocities. A bisector analysis on the line profiles yielded the shapes and convective shifts of seven photospheric lines. At disk center, the bisector profiles of the iron lines feature a pronounced C-shape with maximum convective blueshifts of up to ${\rm -450\,m\,s^{-1}}$ in the spectral line wings. Toward the solar limb, the bisectors change into a \textbackslash-shape with a saturation in the line core at a redshift of ${\rm +100\,m\,s^{-1}}$. The center-to-limb variation of the line core velocities shows a slight increase in blueshift when departing the disk center for larger heliocentric angles. This increase in blueshift is more pronounced for the magnetically less active meridian than for the equator. Toward the solar limb, the blueshift decreases and can turn into a redshift. Best spectroscopic measurements enabled the accurate determination of absolute convective shifts in the solar photosphere. △ Less

Submitted 19 December, 2017; originally announced December 2017.

Comments: 16 pages, 13 figures, appendix with 5 figures

Journal ref: A&A 611, A4 (2018)

LARS - An Absolute Reference Spectrograph for solar observations, Upgrade from a prototype to a turn-key system

Authors: J. Loehner-Boettcher, W. Schmidt, H. -P. Doerr, T. Kentischer, T. Steinmetz, R. A. Probst, R. Holzwarth

Abstract: LARS is an Absolute Reference Spectrograph designed for ultra-precise solar observations. The high-resolution echelle spectrograph of the Vacuum Tower Telescope is supported by a state-of-the-art laser frequency comb to calibrate the solar spectrum on an absolute wavelength scale. In this article, we describe the scientific instrument and focus on the upgrades in the last two years to turn the pro… ▽ More LARS is an Absolute Reference Spectrograph designed for ultra-precise solar observations. The high-resolution echelle spectrograph of the Vacuum Tower Telescope is supported by a state-of-the-art laser frequency comb to calibrate the solar spectrum on an absolute wavelength scale. In this article, we describe the scientific instrument and focus on the upgrades in the last two years to turn the prototype into a turn-key system. The pursued goal was to improve the short-term and long-term stability of the systems, and enable a user-friendly and more versatile operation of the instrument. The first upgrade involved the modernization of the frequency comb. The Fabry-Perot cavities were adjusted to filter to a repetition frequency of 8GHz. A technologically matured photonic crystal fiber was implemented for spectral broadening. The second, quite recent upgrade was performed on the optics feeding the sunlight into a single-mode fiber connected to the spectrograph. A motorized translation stage was deployed to allow the automated selection of three different fields-of-view with diameters of 1", 3", and 10" for the analysis of the solar spectrum. The successful upgrades allow for long-term observations of up to several hours per day with a stable spectral accuracy of 1 m/s limited by the spectrograph. Stable, user-friendly operation of the instrument is supported. The selection of the pre-aligned fiber to change the field of view can now be done within seconds. LARS offers the possibility to observe absolute wavelength positions of spectral lines and Doppler velocities in the solar atmosphere. First results demonstrate the capabilities of the instrument for solar science. The accurate measurement of the solar convection, p-modes, and atmospheric waves will enhance our knowledge of the solar atmosphere and its physical conditions to improve current atmospheric models. △ Less

Submitted 5 July, 2017; originally announced July 2017.

Comments: 10 pages, 14 figures

Journal ref: A&A 607, A12 (2017)

JOKARUS - Design of a compact optical iodine frequency reference for a sounding rocket mission

Authors: Vladimir Schkolnik, Klaus Döringshoff, Franz Balthasar Gutsch, Markus Oswald, Thilo Schuldt, Claus Braxmaier, Matthias Lezius, Ronald Holzwarth, Christian Kürbis, Ahmad Bawamia, Markus Krutzik, Achim Peters

Abstract: We present the design of a compact absolute optical frequency reference for space applications based on hyperfine transitions in molecular iodine with a targeted fractional frequency instability of better than $3\cdot 10^{-14}$. It is based on a micro-integrated extended cavity diode laser with integrated optical amplifier, fiber pigtailed second harmonic generation wave-guide modules, and a quasi… ▽ More We present the design of a compact absolute optical frequency reference for space applications based on hyperfine transitions in molecular iodine with a targeted fractional frequency instability of better than $3\cdot 10^{-14}$. It is based on a micro-integrated extended cavity diode laser with integrated optical amplifier, fiber pigtailed second harmonic generation wave-guide modules, and a quasi-monolithic spectroscopy setup with operating electronics. The instrument described here is scheduled for launch end of 2017 aboard the TEXUS 54 sounding rocket as an important qualification step towards space application of iodine frequency references and related technologies. The payload will operate autonomously and its optical frequency will be compared to an optical frequency comb during its space flight. △ Less

Submitted 27 February, 2017; originally announced February 2017.

Transverse and longitudinal characterization of electron beams using interaction with optical near-fields

Authors: Martin Kozák, Joshua McNeur, Kenneth J. Leedle, Huiyang Deng, Norbert Schönenberger, Axel Ruehl, Ingmar Hartl, Heinar Hoogland, Ronald Holzwarth, James S. Harris, Robert L. Byer, Peter Hommelhoff

Abstract: We demonstrate an experimental technique for both transverse and longitudinal characterization of bunched femtosecond free electron beams. The operation principle is based on monitoring of the current of electrons that obtained an energy gain during the interaction with the synchronized optical near-field wave excited by femtosecond laser pulses. The synchronous accelerating/decelerating fields co… ▽ More We demonstrate an experimental technique for both transverse and longitudinal characterization of bunched femtosecond free electron beams. The operation principle is based on monitoring of the current of electrons that obtained an energy gain during the interaction with the synchronized optical near-field wave excited by femtosecond laser pulses. The synchronous accelerating/decelerating fields confined to the surface of a silicon nanostructure are characterized using a highly focused sub-relativistic electron beam. Here the transverse spatial resolution of 450 nm and femtosecond temporal resolution achievable by this technique are demonstrated. △ Less

Submitted 29 November, 2016; originally announced November 2016.

Journal ref: Optics Letters 41, 3435-3438 (2016)

Photonic microwave signals with zeptosecond level absolute timing noise

Authors: Xiaopeng Xie, Romain Bouchand, Daniele Nicolodi, Michele Giunta, Wolfgang Hänsel, Matthias Lezius, Abhay Joshi, Shubhashish Datta, Christophe Alexandre, Michel Lours, Pierre-Alain Tremblin, Giorgio Santarelli, Ronald Holzwarth, Yann Le Coq

Abstract: Photonic synthesis of radiofrequency revived the quest for unrivalled microwave purity by its seducing ability to convey the benefits of the optics to the microwave world. In this work, we perform a high-fidelity transfer of frequency stability between an optical reference and a microwave signal via a low-noise fiber-based frequency comb and cutting-edge photo-detection techniques. We demonstrate… ▽ More Photonic synthesis of radiofrequency revived the quest for unrivalled microwave purity by its seducing ability to convey the benefits of the optics to the microwave world. In this work, we perform a high-fidelity transfer of frequency stability between an optical reference and a microwave signal via a low-noise fiber-based frequency comb and cutting-edge photo-detection techniques. We demonstrate the generation of the purest microwave signal with a fractional frequency stability below 6.5 x 10^-16 at 1 s and a timing noise floor below 41 zs.Hz^-1/2 (phase noise below -173 dBc.Hz^-1 for a 12 GHz carrier). This outclasses existing sources and promises a new era for state-of-the-art microwave generation. The characterization is achieved by building two auxiliary low noise optoelectronic microwave reference and using a heterodyne cross-correlation scheme with lowermost detection noise. This unprecedented level of purity can impact domains such as radar systems, telecommunications and time-frequency metrology. Furthermore, the measurement methods developed here can benefit the characterization of a broad range of signals, beyond comb-based systems. △ Less

Submitted 5 October, 2016; originally announced October 2016.

Comments: 21 pages, 3 figures

Sub 100-fs, 5.2-$μ$m ZGP Parametric Amplifier Driven by a ps Ho:YAG Chirped Pulse Amplifier and its application to high harmonic generation

Authors: Tsuneto Kanai, Pavel Malevich, Sarayoo Sasidharan Kangaparambil, Heinar Hoogland, Ronald Holzwarth, Audrius Pugžlys, Andrius Baltuška

Abstract: We report a 1 kHz repetition-rate mid-IR (MIR) optical parametric amplifier (OPA) system operating at a central wavelength of 5.2 $μ$m with the tail-to-tail spectrum extending over 1.5 $μ$m and delivering 40 $μ$J pulses that are compressed to 99 fs (5.6 optical cycles). Also we develop a novel pulse compression scheme for further pulse compression and wavelength tunability. As the first applicatio… ▽ More We report a 1 kHz repetition-rate mid-IR (MIR) optical parametric amplifier (OPA) system operating at a central wavelength of 5.2 $μ$m with the tail-to-tail spectrum extending over 1.5 $μ$m and delivering 40 $μ$J pulses that are compressed to 99 fs (5.6 optical cycles). Also we develop a novel pulse compression scheme for further pulse compression and wavelength tunability. As the first application of this laser system, we generated high harmonics in bulk ZnSe above the bandgap, dense exciton generation after 10-photon absorption, high order sum- and difference-frequency generation, ultrafast transition in the conduction band, which reflects the structure of conduction bands. △ Less

Submitted 15 September, 2016; originally announced September 2016.

Comments: 5 pages, 5 figures

Elements of a dielectric laser accelerator

Authors: Joshua McNeur, Martin Kozák, Norbert Schönenberger, Kenneth J. Leedle, Huiyang Deng, Andrew Ceballos, Heinar Hoogland, Axel Ruehl, Ingmar Hartl, Ronald Holzwarth, Olav Solgaard, James S. Harris, Robert L. Byer, Peter Hommelhoff

Abstract: The widespread use of high energy particle beams in basic research, medicine and coherent X-ray generation coupled with the large size of modern radio frequency (RF) accelerator devices and facilities has motivated a strong need for alternative accelerators operating in regimes outside of RF. Working at optical frequencies, dielectric laser accelerators (DLAs) - transparent laser-driven nanoscale… ▽ More The widespread use of high energy particle beams in basic research, medicine and coherent X-ray generation coupled with the large size of modern radio frequency (RF) accelerator devices and facilities has motivated a strong need for alternative accelerators operating in regimes outside of RF. Working at optical frequencies, dielectric laser accelerators (DLAs) - transparent laser-driven nanoscale dielectric structures whose near fields can synchronously accelerate charged particles - have demonstrated high-gradient acceleration with a variety of laser wavelengths, materials, and electron beam parameters, potentially enabling miniaturized accelerators and table-top coherent x-ray sources. To realize a useful (i.e. scalable) DLA, crucial developments have remained: concatenation of components including sustained phase synchronicity to reach arbitrary final energies as well as deflection and focusing elements to keep the beam well collimated along the design axis. Here, all of these elements are demonstrated with a subrelativistic electron beam. In particular, by creating two interaction regions via illumination of a nanograting with two spatio-temporally separated pulsed laser beams, we demonstrate a phase-controlled doubling of electron energy gain from 0.7 to 1.4 keV (2.5 percent to 5 percent of the initial beam energy) and through use of a chirped grating geometry, we overcome the dephasing limit of 25 keV electrons, increasing their energy gains to a laser power limited 10 percent of their initial energy. Further, optically-driven transverse focusing of the electron beam with focal lengths below 200 microns is achieved via a parabolic grating geometry. These results lay the cornerstone for future miniaturized phase synchronous vacuum-structure-based accelerators. △ Less

Submitted 5 June, 2016; v1 submitted 26 April, 2016; originally announced April 2016.

Characterization of a 450-km Baseline GPS Carrier-Phase Link using an Optical Fiber Link

Authors: Stefan Droste, Christian Grebing, Julia Leute, Sebastian M. F. Raupach, Arthur Matveev, Theodor W. Hänsch, Andreas Bauch, Ronald Holzwarth, Gesine Grosche

Abstract: A GPS carrier-phase frequency transfer link along a baseline of 450 km has been established and is characterized by comparing it to a phase-stabilized optical fiber link of 920 km length, established between the two endpoints, the Max-Planck-Institut für Quantenoptik in Garching and the Physikalisch-Technische Bundesanstalt in Braunschweig. The characterization is accomplished by comparing two act… ▽ More A GPS carrier-phase frequency transfer link along a baseline of 450 km has been established and is characterized by comparing it to a phase-stabilized optical fiber link of 920 km length, established between the two endpoints, the Max-Planck-Institut für Quantenoptik in Garching and the Physikalisch-Technische Bundesanstalt in Braunschweig. The characterization is accomplished by comparing two active hydrogen masers operated at both institutes. The masers serve as local oscillators and cancel out when the double differences are calculated, such that they do not constitute a limitation for the GPS link characterization. We achieve a frequency instability of 3 x 10^(-13) in 30 s and 5 x 10^(-16) for long averaging times. Frequency comparison results obtained via both links show no deviation larger than the statistical uncertainty of 6 x 10^(-16). These results can be interpreted as a successful cross-check of the measurement uncertainty of a truly remote end fiber link. △ Less

Submitted 5 May, 2015; originally announced May 2015.

Comments: 14 pages, 6 figures

Comb-calibrated solar spectroscopy through a multiplexed single-mode fiber channel

Authors: R A Probst, L Wang, H-P Doerr, T Steinmetz, T J Kentischer, G Zhao, T W Hänsch, Th Udem, R Holzwarth, W Schmidt

Abstract: We investigate a new scheme for astronomical spectrograph calibration using the laser frequency comb at the Solar Vacuum Tower Telescope on Tenerife. Our concept is based upon a single-mode fiber channel, that simultaneously feeds the spectrograph with comb light and sunlight. This yields nearly perfect spatial mode matching between the two sources. In combination with the absolute calibration pro… ▽ More We investigate a new scheme for astronomical spectrograph calibration using the laser frequency comb at the Solar Vacuum Tower Telescope on Tenerife. Our concept is based upon a single-mode fiber channel, that simultaneously feeds the spectrograph with comb light and sunlight. This yields nearly perfect spatial mode matching between the two sources. In combination with the absolute calibration provided by the frequency comb, this method enables extremely robust and accurate spectroscopic measurements. The performance of this scheme is compared to a sequence of alternating comb and sunlight, and to absorption lines from Earth's atmosphere. We also show how the method can be used for radial-velocity detection by measuring the well-explored 5-minute oscillations averaged over the full solar disk. Our method is currently restricted to solar spectroscopy, but with further evolving fiber-injection techniques it could become an option even for faint astronomical targets. △ Less

Submitted 17 February, 2015; originally announced February 2015.

Comments: 21 pages, 11 figures. A video abstract for this paper is available on youtube. For watching the video, please follow https://www.youtube.com/watch?v=oshdZgrt89I . The video abstract is also available for streaming and download on the related article website of New Journal of Physics

Journal ref: New J. Phys. 17, 023048 (2015)

A Frequency Comb calibrated Solar Atlas

Authors: P. Molaro, M. Esposito, S. Monai, J. I. Gonzalez Hernandez, T. W. Hansch, R. Holzwarth, A. Manescau, L. Pasquini, R. A. Probst, R. Rebolo, T. Steinmetz, Th. Udem, T. Wilken

Abstract: The solar spectrum is a primary reference for the study of physical processes in stars and their variation during activity cycles. In Nov 2010 an experiment with a prototype of a Laser Frequency Comb (LFC) calibration system was performed with the HARPS spectrograph of the 3.6m ESO telescope at La Silla during which high signal-to-noise spectra of the Moon were obtained. We exploit those Echelle s… ▽ More The solar spectrum is a primary reference for the study of physical processes in stars and their variation during activity cycles. In Nov 2010 an experiment with a prototype of a Laser Frequency Comb (LFC) calibration system was performed with the HARPS spectrograph of the 3.6m ESO telescope at La Silla during which high signal-to-noise spectra of the Moon were obtained. We exploit those Echelle spectra to study the optical integrated solar spectrum . The DAOSPEC program is used to measure solar line positions through gaussian fitting in an automatic way. We first apply the LFC solar spectrum to characterize the CCDs of the HARPS spectrograph. The comparison of the LFC and Th-Ar calibrated spectra reveals S-type distortions on each order along the whole spectral range with an amplitude of +/-40 m/s. This confirms the pattern found by Wilken et al. (2010) on a single order and extends the detection of the distortions to the whole analyzed region revealing that the precise shape varies with wavelength. A new data reduction is implemented to deal with CCD pixel inequalities to obtain a wavelength corrected solar spectrum. By using this spectrum we provide a new LFC calibrated solar atlas with 400 line positions in the range of 476-530, and 175 lines in the 534-585 nm range. The new LFC atlas improves the accuracy of individual lines by a significant factor reaching a mean value of about 10 m/s. The LFC--based solar line wavelengths are essentially free of major instrumental effects and provide a reference for absolute solar line positions. We suggest that future LFC observations could be used to trace small radial velocity changes of the whole solar photospheric spectrum in connection with the solar cycle and for direct comparison with the predicted line positions of 3D radiative hydrodynamical models of the solar photosphere. △ Less

Submitted 18 October, 2013; originally announced October 2013.

Comments: Accept on the 15th of October 2013. 9 pages, 10 figures. ON-lINE data A&A 2013

The magnetosphere of the close accreting PMS binary V4046 Sgr AB

Authors: S. G. Gregory, V. R. Holzwarth, J. -F. Donati, G. A. J. Hussain, T. Montmerle, E. Alecian, S. H. P. Alencar, C. Argiroffi, M. Audard, J. Bouvier, F. Damiani, M. Güdel, D. P. Huenemoerder, J. H. Kastner, A. Maggio, G. G. Sacco, G. A. Wade

Abstract: We present a preliminary 3D potential field extrapolation model of the joint magnetosphere of the close accreting PMS binary V4046 Sgr. The model is derived from magnetic maps obtained as part of a coordinated optical and X-ray observing program. We present a preliminary 3D potential field extrapolation model of the joint magnetosphere of the close accreting PMS binary V4046 Sgr. The model is derived from magnetic maps obtained as part of a coordinated optical and X-ray observing program. △ Less

Submitted 9 September, 2013; originally announced September 2013.

Comments: 2 pages, proceedings of IAUS 302 "Magnetic Fields throughout Stellar Evolution", Biarritz, France, August 2013. CUP, in press

The magnetosphere of the close accreting PMS binary V4046 Sgr

Authors: S. G. Gregory, V. R. Holzwarth, J. -F. Donati, G. A. J. Hussain, T. Montmerle, E. Alecian, S. H. P. Alencar, C. Argiroffi, M. Audard, J. Bouvier, F. Damiani, M. Güdel, D. P. Huenemoerder, J. H. Kastner, A. Maggio, G. G. Sacco, G. A. Wade

Abstract: V4046 Sagittarii AB is a close short-period classical T Tauri binary. It is a circularised and synchronised system accreting from a circumbinary disk. In 2009 it was observed as part of a coordinated program involving near-simultaneous spectropolarimetric observations with ESPaDOnS at the Canada-France-Hawai'i Telescope and high-resolution X-ray observations with XMM-Newton. Magnetic maps of each… ▽ More V4046 Sagittarii AB is a close short-period classical T Tauri binary. It is a circularised and synchronised system accreting from a circumbinary disk. In 2009 it was observed as part of a coordinated program involving near-simultaneous spectropolarimetric observations with ESPaDOnS at the Canada-France-Hawai'i Telescope and high-resolution X-ray observations with XMM-Newton. Magnetic maps of each star were derived from Zeeman-Doppler imaging. After briefly highlighting the most significant observational findings, we present a preliminary 3D model of the binary magnetosphere constructed from the magnetic maps using a newly developed binary magnetic field extrapolation code. The large-scale fields (the dipole components) of both stars are highly tilted with respect to their rotation axes, and their magnetic fields are linked. △ Less

Submitted 31 August, 2013; originally announced September 2013.

Comments: Proceedings of the "Physics at the Magnetospheric Boundary" conference, Geneva, June 2013

Coherent terabit communications with microresonator Kerr frequency combs

Authors: Joerg Pfeifle, Victor Brasch, Matthias Lauermann, Yimin Yu, Daniel Wegner, Tobias Herr, Klaus Hartinger, Philipp Schindler, **gshi Li, David Hillerkuss, Rene Schmogrow, Claudius Weimann, Ronald Holzwarth, Wolfgang Freude, Juerg Leuthold, Tobias J. Kippenberg, Christian Koos

Abstract: Optical frequency combs enable coherent data transmission on hundreds of wavelength channels and have the potential to revolutionize terabit communications. Generation of Kerr combs in nonlinear integrated microcavities represents a particularly promising option enabling line spacings of tens of GHz, compliant with wavelength-division multiplexing (WDM) grids. However, Kerr combs may exhibit stron… ▽ More Optical frequency combs enable coherent data transmission on hundreds of wavelength channels and have the potential to revolutionize terabit communications. Generation of Kerr combs in nonlinear integrated microcavities represents a particularly promising option enabling line spacings of tens of GHz, compliant with wavelength-division multiplexing (WDM) grids. However, Kerr combs may exhibit strong phase noise and multiplet spectral lines, and this has made high-speed data transmission impossible up to now. Recent work has shown that systematic adjustment of pump conditions enables low phase-noise Kerr combs with singlet spectral lines. Here we demonstrate that Kerr combs are suited for coherent data transmission with advanced modulation formats that pose stringent requirements on the spectral purity of the optical source. In a first experiment, we encode a data stream of 392 Gbit/s on subsequent lines of a Kerr comb using quadrature phase shift keying (QPSK) and 16-state quadrature amplitude modulation (16QAM). A second experiment shows feedback-stabilization of a Kerr comb and transmission of a 1.44 Tbit/s data stream over a distance of up to 300 km. The results demonstrate that Kerr combs can meet the highly demanding requirements of multi-terabit/s coherent communications and thus offer a solution towards chip-scale terabit/s transceivers. △ Less

Submitted 22 February, 2014; v1 submitted 3 July, 2013; originally announced July 2013.

Journal ref: Nature Photon., Vol. 8, pp. 375-380 (2014)

High-power mid-infrared frequency comb source based on a femtosecond Er:fiber oscillator

Authors: Feng Zhu, Holger Hundertmark, Alexandre A. Kolomenskii, James Strohaber, Ronald Holzwarth, Hans A. Schuessler

Abstract: We report on a high-power mid-infrared frequency comb source based on a femtosecond Er:fiber oscillator with a stabilized repetition rate at 250 MHz. The mid-infrared frequency comb is produced through difference frequency generation in a periodically poled MgO-doped lithium niobate crystal. The output power is about 120 mW with a pulse duration of about 80 fs, and spectrum coverage from 2.9 to 3.… ▽ More We report on a high-power mid-infrared frequency comb source based on a femtosecond Er:fiber oscillator with a stabilized repetition rate at 250 MHz. The mid-infrared frequency comb is produced through difference frequency generation in a periodically poled MgO-doped lithium niobate crystal. The output power is about 120 mW with a pulse duration of about 80 fs, and spectrum coverage from 2.9 to 3.6 um. The coherence properties of the produced high-power broadband mid-infrared frequency comb are maintained, which was verified by heterodyne measurements. As the first application, the spectrum of a ~200 ppm methane-air mixture in a short 20 cm glass cell at ambient atmospheric pressure and temperature was measured. △ Less

Submitted 19 February, 2013; originally announced February 2013.

Comments: 3 pages, 5 figures

Dispersion engineered high-Q silicon Nitride Ring-Resonators via Atomic Layer Deposition

Authors: Johann Riemensberger, Klaus Hartinger, Tobias Herr, Victor Brasch, Ronald Holzwarth, Tobias J. Kippenberg

Abstract: We demonstrate dispersion engineering of integrated silicon nitride based ring resonators through conformal coating with hafnium dioxide deposited on top of the structures via atomic layer deposition (ALD). Both, magnitude and bandwidth of anomalous dispersion can be significantly increased. All results are confirmed by high resolution frequency-comb-assisted-diode-laser spectroscopy and are in ve… ▽ More We demonstrate dispersion engineering of integrated silicon nitride based ring resonators through conformal coating with hafnium dioxide deposited on top of the structures via atomic layer deposition (ALD). Both, magnitude and bandwidth of anomalous dispersion can be significantly increased. All results are confirmed by high resolution frequency-comb-assisted-diode-laser spectroscopy and are in very good agreement with the simulated modification of the mode spectrum. △ Less

Submitted 16 July, 2012; originally announced July 2012.

Comments: 4 pages, 4 figures

Journal ref: Optics Express Vol. 20, Issue 25, pp. 27661-27669 (2012)

The Space Optical Clocks Project: Development of high-performance transportable and breadboard optical clocks and advanced subsystems

Authors: S. Schiller, A. Görlitz, A. Nevsky, S. Alighanbari, S. Vasilyev, C. Abou-Jaoudeh, G. Mura, T. Franzen, U. Sterr, S. Falke, Ch. Lisdat, E. Rasel, A. Kulosa, S. Bize, J. Lodewyck, G. M. Tino, N. Poli, M. Schioppo, K. Bongs, Y. Singh, P. Gill, G. Barwood, Y. Ovchinnikov, J. Stuhler, W. Kaenders , et al. (6 additional authors not shown)

Abstract: The use of ultra-precise optical clocks in space ("master clocks") will allow for a range of new applications in the fields of fundamental physics (tests of Einstein's theory of General Relativity, time and frequency metrology by means of the comparison of distant terrestrial clocks), geophysics (map** of the gravitational potential of Earth), and astronomy (providing local oscillators for radio… ▽ More The use of ultra-precise optical clocks in space ("master clocks") will allow for a range of new applications in the fields of fundamental physics (tests of Einstein's theory of General Relativity, time and frequency metrology by means of the comparison of distant terrestrial clocks), geophysics (map** of the gravitational potential of Earth), and astronomy (providing local oscillators for radio ranging and interferometry in space). Within the ELIPS-3 program of ESA, the "Space Optical Clocks" (SOC) project aims to install and to operate an optical lattice clock on the ISS towards the end of this decade, as a natural follow-on to the ACES mission, improving its performance by at least one order of magnitude. The payload is planned to include an optical lattice clock, as well as a frequency comb, a microwave link, and an optical link for comparisons of the ISS clock with ground clocks located in several countries and continents. Undertaking a necessary step towards optical clocks in space, the EU-FP7-SPACE-2010-1 project no. 263500 (SOC2) (2011-2015) aims at two "engineering confidence", accurate transportable lattice optical clock demonstrators having relative frequency instability below 1\times10^-15 at 1 s integration time and relative inaccuracy below 5\times10^-17. This goal performance is about 2 and 1 orders better in instability and inaccuracy, respectively, than today's best transportable clocks. The devices will be based on trapped neutral ytterbium and strontium atoms. One device will be a breadboard. The two systems will be validated in laboratory environments and their performance will be established by comparison with laboratory optical clocks and primary frequency standards. In this paper we present the project and the results achieved during the first year. △ Less

Submitted 17 June, 2012; originally announced June 2012.

Comments: Contribution to European Frequency and Time Forum 2012, Gothenburg, Sweden

A Laser Frequency Comb System for Absolute Calibration of the VTT Echelle Spectrograph

Authors: H. -P. Doerr, T. Steinmetz, R. Holzwarth, T. Kentischer und W. Schmidt

Abstract: A wavelength calibration system based on a laser frequency comb (LFC) was developed in a co-operation between the Kiepenheuer-Institut für Sonnenphysik, Freiburg, Germany and the Max-Planck-Institut für Quantenoptik, Garching, Germany for permanent installation at the German Vacuum Tower Telescope (VTT) on Tenerife, Canary Islands. The system was installed successfully in October 2011. By simultan… ▽ More A wavelength calibration system based on a laser frequency comb (LFC) was developed in a co-operation between the Kiepenheuer-Institut für Sonnenphysik, Freiburg, Germany and the Max-Planck-Institut für Quantenoptik, Garching, Germany for permanent installation at the German Vacuum Tower Telescope (VTT) on Tenerife, Canary Islands. The system was installed successfully in October 2011. By simultaneously recording the spectra from the Sun and the LFC, for each exposure a calibration curve can be derived from the known frequencies of the comb modes that is suitable for absolute calibration at the meters per second level. We briefly summarize some topics in solar physics that benefit from absolute spectroscopy and point out the advantages of LFC compared to traditional calibration techniques. We also sketch the basic setup of the VTT calibration system and its integration with the existing echelle spectrograph. △ Less

Submitted 4 April, 2012; originally announced April 2012.

Comments: 9 pages, 2 figures; Solar Physics 277 (2012)

Universal Dynamics of Kerr Frequency Comb Formation in Microresonators

Authors: T. Herr, J. Riemensberger, C. Wang, K. Hartinger, E. Gavartin, R. Holzwarth, M. L. Gorodetsky, T. J. Kippenberg

Abstract: Optical frequency combs allow for precise measurement of optical frequencies and are used in a growing number of applications beyond spectroscopy and optical frequency metrology. A class of compact microresonator based frequency comb generators has emerged recently based on (hyper)-parametric frequency conversion, mediated by the Kerr-non-linearity, of a continuous wave laser beam. Despite the rap… ▽ More Optical frequency combs allow for precise measurement of optical frequencies and are used in a growing number of applications beyond spectroscopy and optical frequency metrology. A class of compact microresonator based frequency comb generators has emerged recently based on (hyper)-parametric frequency conversion, mediated by the Kerr-non-linearity, of a continuous wave laser beam. Despite the rapid progress and the emergence of a wide variety of micro-resonator Kerr-comb platforms, an understanding of the dynamics of the Kerr comb formation is still lacking. In particular the question in which regime low phase noise performance can be achieved has so far not been answered but is of critical importance for future application of this technology. Here an universal, platform independent understanding of the Kerr-comb formation dynamics based on experimental observations in crystalline MgF2 and planar Si3N4 comb generators is given. This explains a wide range of hereto not understood phenomena and reveals for the first time the underlying condition for low phase noise performance. △ Less

Submitted 13 November, 2011; originally announced November 2011.

Journal ref: Nature Photonics 6, 480-487 (2012)

Characterizing a fiber-based frequency comb with electro-optic modulator

Authors: W. Zhang, M. Lours, M. Fischer, R. Holzwarth, G. Santarelli, Y. Le Coq

Abstract: We report on the characterization of a commercial-core fiber-based frequency comb equipped with an intracavity electro-optic modulator (EOM). We investigate the relationship between the noise of the pump diode and the laser relative intensity noise (RIN) and demonstrate the use of a low noise current supply to substantially reduce the laser RIN. By measuring several transfer functions, we evaluate… ▽ More We report on the characterization of a commercial-core fiber-based frequency comb equipped with an intracavity electro-optic modulator (EOM). We investigate the relationship between the noise of the pump diode and the laser relative intensity noise (RIN) and demonstrate the use of a low noise current supply to substantially reduce the laser RIN. By measuring several transfer functions, we evaluate the potentiality of the EOM for comb repetition rate stabilization. We also evaluate the coupling to other relevant parameters of the comb. From these measureemnts, we infer the capabilities of the femtosecond laser comb to generate very low phase noise microwave signals when phase locked to a high spectral purity ultra-stable laser. △ Less

Submitted 14 September, 2011; originally announced September 2011.

Comments: Submitted to IEEE UFFC Special issue

Journal ref: IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 59, 432 (2012)

Mid-Infrared Optical Frequency Combs based on Crystalline Microresonators

Authors: C. Y. Wang, T. Herr, P. Del'Haye, A. Schliesser, J. Hofer, R. Holzwarth, T. W. Hänsch, N. Picqué, T. J. Kippenberg

Abstract: The mid-infrared spectral range (2 to 20 μm) is of particular importance for chemistry, biology and physics as many molecules exhibit strong ro-vibrational fingerprints. Frequency combs - broad spectral bandwidth coherent light sources consisting of equally spaced sharp lines - are creating new opportunities for advanced spectroscopy. Mid-infrared frequency comb sources have recently emerged but a… ▽ More The mid-infrared spectral range (2 to 20 μm) is of particular importance for chemistry, biology and physics as many molecules exhibit strong ro-vibrational fingerprints. Frequency combs - broad spectral bandwidth coherent light sources consisting of equally spaced sharp lines - are creating new opportunities for advanced spectroscopy. Mid-infrared frequency comb sources have recently emerged but are still facing technological challenges, like achieving high power per comb line and tens of GHz line spacing as required for e.g. direct comb spectroscopy. Here we demonstrate a novel approach to create such a frequency comb via four-wave mixing in a continuous-wave pumped ultra-high Q crystalline microresonator made of magnesium fluoride. Careful choice of the resonator material and design made it possible to generate a broad comb of narrow lines in the mid-infrared: a vast cascade of about 100 lines spaced by 100 GHz spanning 200 nm (~10 THz) at λ=2.5 μm. With its distinguishing features of compactness, efficient conversion, large mode spacing and high power per comb line, this novel frequency comb source holds promise for new approaches to molecular spectroscopy even deeper in the mid-infrared. △ Less

Submitted 12 March, 2012; v1 submitted 13 September, 2011; originally announced September 2011.

Comments: 5 pages, 3 figures

Improved Measurement of the Hydrogen 1S - 2S Transition Frequency

Authors: Christian G. Parthey, Arthur Matveev, Janis Alnis, Birgitta Bernhardt, Axel Beyer, Ronald Holzwarth, Aliaksei Maistrou, Randolf Pohl, Katharina Predehl, Thomas Udem, Tobias Wilken, Nikolai Kolachevsky, Michel Abgrall, Daniele Rovera, Christophe Salomon, Philippe Laurent, Theodor W. Hänsch

Abstract: We have measured the 1S - 2S transition frequency in atomic hydrogen via two photon spectroscopy on a 5.8 K atomic beam. We obtain $f_{1S-2S} = 2 466 061 413 187 035 (10)$ Hz for the hyperfine centroid. This is a fractional frequency uncertainty of $4.2\times 10^{-15}$ improving the previous measure- ment by our own group [M. Fischer et al., Phys. Rev. Lett. 92, 230802 (2004)] by a factor of 3.3.… ▽ More We have measured the 1S - 2S transition frequency in atomic hydrogen via two photon spectroscopy on a 5.8 K atomic beam. We obtain $f_{1S-2S} = 2 466 061 413 187 035 (10)$ Hz for the hyperfine centroid. This is a fractional frequency uncertainty of $4.2\times 10^{-15}$ improving the previous measure- ment by our own group [M. Fischer et al., Phys. Rev. Lett. 92, 230802 (2004)] by a factor of 3.3. The probe laser frequency was phase coherently linked to the mobile cesium fountain clock FOM via a frequency comb. △ Less

Submitted 15 July, 2011; originally announced July 2011.

Comments: 5 pages, 4 figures

Comment on "Missing Transverse-Doppler Effect in Time-Dilation Experiments with High-Speed Ions"

Authors: G. Saathoff, S. Reinhardt, R. Holzwarth, T. W. Hänsch, Th. Udem, D. Bing, D. Schwalm, A. Wolf, S. Karpuk, G. Huber, C. Novotny, B. Botermann, C. Geppert, W. Nörtershäuser, T. Kühl, T. Stöhlker, G. Gwinner

Abstract: In an article "Missing Transverse-Doppler Effect in Time-Dilation Experiments with High-Speed Ions" by S. Devasia [arXiv:1003.2970v1], our recent Doppler shift experiments on fast ion beams are reanalyzed. Contrary to our analysis, Devasia concludes that our results provide an "indication of Lorentz violation". We argue that this conclusion is based on a fundamental misunderstanding of our experim… ▽ More In an article "Missing Transverse-Doppler Effect in Time-Dilation Experiments with High-Speed Ions" by S. Devasia [arXiv:1003.2970v1], our recent Doppler shift experiments on fast ion beams are reanalyzed. Contrary to our analysis, Devasia concludes that our results provide an "indication of Lorentz violation". We argue that this conclusion is based on a fundamental misunderstanding of our experimental scheme and reiterate that our results are in excellent agreement with Special Relativity. △ Less

Submitted 28 February, 2011; originally announced February 2011.

Journal ref: Eur. Phys. J. C (2011) 71: 1596

Octave Spanning Frequency Comb on a Chip

Authors: P. Del'Haye, T. Herr, E. Gavartin, R. Holzwarth, T. J. Kippenberg

Abstract: Optical frequency combs have revolutionized the field of frequency metrology within the last decade and have become enabling tools for atomic clocks, gas sensing and astrophysical spectrometer calibration. The rapidly increasing number of applications has heightened interest in more compact comb generators. Optical microresonator based comb generators bear promise in this regard. Critical to the… ▽ More Optical frequency combs have revolutionized the field of frequency metrology within the last decade and have become enabling tools for atomic clocks, gas sensing and astrophysical spectrometer calibration. The rapidly increasing number of applications has heightened interest in more compact comb generators. Optical microresonator based comb generators bear promise in this regard. Critical to their future use as 'frequency markers', is however the absolute frequency stabilization of the optical comb spectrum. A powerful technique for this stabilization is self-referencing, which requires a spectrum that spans a full octave, i.e. a factor of two in frequency. In the case of mode locked lasers, overcoming the limited bandwidth has become possible only with the advent of photonic crystal fibres for supercontinuum generation. Here, we report for the first time the generation of an octave-spanning frequency comb directly from a toroidal microresonator on a silicon chip. The comb spectrum covers the wavelength range from 990 nm to 2170 nm and is retrieved from a continuous wave laser interacting with the modes of an ultra high Q microresonator, without relying on external broadening. Full tunability of the generated frequency comb over a bandwidth exceeding an entire free spectral range is demonstrated. This allows positioning of a frequency comb mode to any desired frequency within the comb bandwidth. The ability to derive octave spanning spectra from microresonator comb generators represents a key step towards achieving a radio-frequency to optical link on a chip, which could unify the fields of metrology with micro- and nano-photonics and enable entirely new devices that bring frequency metrology into a chip scale setting for compact applications such as space based optical clocks. △ Less

Submitted 24 December, 2009; originally announced December 2009.

Cavity-enhanced dual-comb spectroscopy

Authors: Birgitta Bernhardt, Akira Ozawa, Patrick Jacquet, Marion Jacquey, Yohei Kobayashi, Thomas Udem, Ronald Holzwarth, Guy Guelachvili, Theodor W. Hänsch, Nathalie Picqué

Abstract: The sensitivity of molecular fingerprinting is dramatically improved when placing the absorbing sample in a high-finesse optical cavity, thanks to the large increase of the effective path-length. As demonstrated recently, when the equidistant lines from a laser frequency comb are simultaneously injected into the cavity over a large spectral range, multiple trace-gases may be identified within a… ▽ More The sensitivity of molecular fingerprinting is dramatically improved when placing the absorbing sample in a high-finesse optical cavity, thanks to the large increase of the effective path-length. As demonstrated recently, when the equidistant lines from a laser frequency comb are simultaneously injected into the cavity over a large spectral range, multiple trace-gases may be identified within a few milliseconds. Analyzing efficiently the light transmitted through the cavity however still remains challenging. Here, a novel approach, cavity-enhanced frequency comb Fourier transform spectroscopy, fully overcomes this difficulty and measures ultrasensitive, broad-bandwidth, high-resolution spectra within a few tens of $μ$s. It could be implemented from the Terahertz to the ultraviolet regions without any need for detector arrays. We recorded, within 18 $μ$s, spectra of the 1.0 $μ$m overtone bands of ammonia spanning 20 nm with 4.5 GHz resolution and a noise-equivalent-absorption at one-second-averaging per spectral element of 3 10^-12 cm^-1Hz^-1/2, thus opening a route to time-resolved spectroscopy of rapidly-evolving single-events. △ Less

Submitted 13 August, 2009; originally announced August 2009.

Precision spectroscopy of the 3s-3p fine structure doublet in Mg+

Authors: V. Batteiger, S. Knünz, M. Herrmann, G. Saathoff, H. A. Schüssler, B. Bernhardt, T. Wilken, R. Holzwarth, T. W. Hänsch, Th. Udem

Abstract: We apply a recently demonstrated method for precision spectroscopy on strong transitions in trapped ions to measure both fine structure components of the 3s-3p transition in 24-Mg+ and 26-Mg+. We deduce absolute frequency reference data for transition frequencies, isotope shifts and fine structure splittings that are in particular useful for comparison with quasar absorption spectra, which test… ▽ More We apply a recently demonstrated method for precision spectroscopy on strong transitions in trapped ions to measure both fine structure components of the 3s-3p transition in 24-Mg+ and 26-Mg+. We deduce absolute frequency reference data for transition frequencies, isotope shifts and fine structure splittings that are in particular useful for comparison with quasar absorption spectra, which test possible space-time variations of the fine structure constant. The measurement accuracy improves previous literature values, when existing, by more than two orders of magnitude. △ Less

Submitted 2 July, 2009; originally announced July 2009.

Frequency Comb Assisted Diode Laser Spectroscopy for Measurement of Microcavity Dispersion

Authors: P. Del'Haye, O. Arcizet, M. L. Gorodetsky, R. Holzwarth, T. J. Kippenberg

Abstract: While being invented for precision measurement of single atomic transitions, frequency combs have also become a versatile tool for broadband spectroscopy in the last years. In this paper we present a novel and simple approach for broadband spectroscopy, combining the accuracy of an optical fiber-laser-based frequency comb with the ease-of-use of a tunable external cavity diode laser. This scheme… ▽ More While being invented for precision measurement of single atomic transitions, frequency combs have also become a versatile tool for broadband spectroscopy in the last years. In this paper we present a novel and simple approach for broadband spectroscopy, combining the accuracy of an optical fiber-laser-based frequency comb with the ease-of-use of a tunable external cavity diode laser. This scheme enables broadband and fast spectroscopy of microresonator modes and allows for precise measurements of their dispersion, which is an important precondition for broadband optical frequency comb generation that has recently been demonstrated in these devices. Moreover, we find excellent agreement of measured microresonator dispersion with predicted values from finite element simulations and we show that tailoring microresonator dispersion can be achieved by adjusting their geometrical properties. △ Less

Submitted 1 July, 2009; originally announced July 2009.

Phase- coherent comparison of two optical frequency standards over 146 km using a telecommunication fiber link

Authors: Osama Terra, Gesine Grosche, Katharina Predehl, Ronald Holzwarth, Thomas Legero, Uwe Sterr, Burghard Lipphardt, Harald Schnatz

Abstract: We have explored the performance of two "dark fibers" of a commercial telecommunication fiber link for a remote comparison of optical clocks. The two fibers, linking the Leibniz University of Hanover (LUH) with the Physi-kalisch-Technische Bundesanstalt (PTB) in Braunschweig, are connected in Hanover to form a total fiber length of 146 km. At PTB the performance of an optical frequency standard… ▽ More We have explored the performance of two "dark fibers" of a commercial telecommunication fiber link for a remote comparison of optical clocks. The two fibers, linking the Leibniz University of Hanover (LUH) with the Physi-kalisch-Technische Bundesanstalt (PTB) in Braunschweig, are connected in Hanover to form a total fiber length of 146 km. At PTB the performance of an optical frequency standard operating at 456 THz was imprinted to a cw trans-fer laser at 194 THz, and its frequency was transmitted over the fiber. In order to detect and compensate phase noise related to the optical fiber link we have built a low-noise optical fiber interferometer and investigated noise sources that affect the overall performance of the optical link. The frequency stability at the remote end has been measured using the clock laser of PTB's Yb+ frequency standard operating at 344 THz. We show that the frequency of a frequency-stabilized fiber laser can be transmitted over a total fiber length of 146 km with a relative frequency uncertainty below 1E-19, and short term frequency instability given by the fractional Allan deviation of sy(t)=3.3E-15/(t/s). △ Less

Submitted 18 June, 2009; originally announced June 2009.

Optical frequency transfer via 146 km fiber link with 10^{-19} relative accuracy

Authors: G. Grosche, O. Terra, K. Predehl, R. Holzwarth, B. Lipphardt, F. Vogt, U. Sterr, H. Schnatz

Abstract: We demonstrate the long-distance transmission of an ultra-stable optical frequency derived directly from a state-of-the-art optical frequency standard. Using an active stabilization system we deliver the frequency via a 146 km long underground fiber link with a fractional instability of 3*10^{-15} at 1 s, which is close to the theoretical limit for our transfer experiment. The relative uncertain… ▽ More We demonstrate the long-distance transmission of an ultra-stable optical frequency derived directly from a state-of-the-art optical frequency standard. Using an active stabilization system we deliver the frequency via a 146 km long underground fiber link with a fractional instability of 3*10^{-15} at 1 s, which is close to the theoretical limit for our transfer experiment. The relative uncertainty for the transfer is below 1*10^{-19} after 30 000 seconds. Tests with a very short fiber show that noise in our stabilization system contributes fluctuations which are two orders of magnitude lower, namely 3*10^{-17} at 1 s, reaching 10^{-20} after 4000 s. △ Less

Submitted 17 April, 2009; originally announced April 2009.

Comments: 12 pages, 3 figures

Testing the Stability of the Fine Structure Constant in the Laboratory

Authors: N. Kolachevsky, A. Matveev, J. Alnis, C. Parthey, T. Steinmetz, T. Wilken, R. Holzwarth, Th. Udem, T. W. Haensch

Abstract: In this review we discuss the progress of the past decade in testing for a possible temporal variation of the fine structure constant $α$. Advances in atomic sample preparation, laser spectroscopy and optical frequency measurements led to rapid reduction of measurement uncertainties. Eventually laboratory tests became the most sensitive tool to detect a possible variation of $α$ at the present e… ▽ More In this review we discuss the progress of the past decade in testing for a possible temporal variation of the fine structure constant $α$. Advances in atomic sample preparation, laser spectroscopy and optical frequency measurements led to rapid reduction of measurement uncertainties. Eventually laboratory tests became the most sensitive tool to detect a possible variation of $α$ at the present epoch. We explain the methods and technologies that helped make this possible. △ Less

Submitted 10 April, 2009; originally announced April 2009.

Comments: 23 pages, 10 figures, The ISSI Workshop, 6-10 October 2008, on The Nature of Gravity "Confronting Theory and Experiment in Space"

Measurement noise floor for a long-distance optical carrier transmission via fiber

Authors: G. Grosche, O. Terra, K. Predehl, T. Haensch, R. Holzwarth, B. Lipphardt, F. Vogt, U. Sterr, H. Schnatz

Abstract: We investigated the measurement floor and link stability for the transfer of an ultra-stable optical frequency via an optical fiber link. We achieved a near-delay-limited instability of 3x10^(-15)/(tau x Hz) for 147 km deployed fiber, and 10^(-20) (integrations time tau = 4000 s) for the noise floor. We investigated the measurement floor and link stability for the transfer of an ultra-stable optical frequency via an optical fiber link. We achieved a near-delay-limited instability of 3x10^(-15)/(tau x Hz) for 147 km deployed fiber, and 10^(-20) (integrations time tau = 4000 s) for the noise floor. △ Less

Submitted 1 December, 2008; originally announced December 2008.

Comments: 5 pages, 3 figures, 7th Symposium on Frequency Standards and Metrology (Pacific Grove,USA, Oct 2008)

Laser frequency combs for astronomical observations

Authors: Tilo Steinmetz, Tobias Wilken, Constanza Araujo-Hauck, Ronald Holzwarth, Theodor W. Hänsch, Luca Pasquini, Antonio Manescau, Sandro D'Odorico, Michael T. Murphy, Thomas Kentischer, Wolfgang Schmidt, Thomas Udem

Abstract: A direct measurement of the universe's expansion history could be made by observing in real time the evolution of the cosmological redshift of distant objects. However, this would require measurements of Doppler velocity drifts of about 1 centimeter per second per year, and astronomical spectrographs have not yet been calibrated to this tolerance. We demonstrate the first use of a laser frequenc… ▽ More A direct measurement of the universe's expansion history could be made by observing in real time the evolution of the cosmological redshift of distant objects. However, this would require measurements of Doppler velocity drifts of about 1 centimeter per second per year, and astronomical spectrographs have not yet been calibrated to this tolerance. We demonstrate the first use of a laser frequency comb for wavelength calibration of an astronomical telescope. Even with a simple analysis, absolute calibration is achieved with an equivalent Doppler precision of approximately 9 meters per second at about 1.5 micrometers - beyond state-of-the-art accuracy. We show that tracking complex, time-varying systematic effects in the spectrograph and detector system is a particular advantage of laser frequency comb calibration. This technique promises an effective means for modeling and removal of such systematic effects to the accuracy required by future experiments to see direct evidence of the universe's putative acceleration. △ Less

Submitted 9 September, 2008; originally announced September 2008.

Comments: Science, 5th September 2008. 18 pages, 7 figures (7 JPG files), including Supporting Online Material. Version with higher resolution figures available at http://astronomy.swin.edu.au/~mmurphy/pub.html

Journal ref: Science 321:1335-1337,2008

Full Stabilization of a Microresonator based Optical Frequency Comb

Authors: P. Del'Haye, O. Arcizet, A. Schliesser, R. Holzwarth, T. J. Kippenberg

Abstract: We demonstrate control and stabilization of an optical frequency comb generated by four-wave mixing in a monolithic microresonator with a mode spacing in the microwave regime (86 GHz). The comb parameters (mode spacing and offset frequency) are controlled via the power and the frequency of the pump laser, which constitutes one of the comb modes. Furthermore, generation of a microwave beat note a… ▽ More We demonstrate control and stabilization of an optical frequency comb generated by four-wave mixing in a monolithic microresonator with a mode spacing in the microwave regime (86 GHz). The comb parameters (mode spacing and offset frequency) are controlled via the power and the frequency of the pump laser, which constitutes one of the comb modes. Furthermore, generation of a microwave beat note at the comb's mode spacing frequency is presented, enabling direct stabilization to a microwave frequency standard. △ Less

Submitted 24 June, 2008; v1 submitted 12 March, 2008; originally announced March 2008.

Optical frequency comb generation from a monolithic microresonator

Authors: P. Del Haye, A. Schliesser, O. Arcizet, T. Wilkins, R. Holzwarth, T. J. Kippenberg

Abstract: Optical frequency combs provide equidistant frequency markers in the infrared, visible and ultra-violet and can link an unknown optical frequency to a radio or microwave frequency reference. Since their inception frequency combs have triggered major advances in optical frequency metrology and precision measurements and in applications such as broadband laser-based gas sensing8 and molecular fing… ▽ More Optical frequency combs provide equidistant frequency markers in the infrared, visible and ultra-violet and can link an unknown optical frequency to a radio or microwave frequency reference. Since their inception frequency combs have triggered major advances in optical frequency metrology and precision measurements and in applications such as broadband laser-based gas sensing8 and molecular fingerprinting. Early work generated frequency combs by intra-cavity phase modulation while to date frequency combs are generated utilizing the comb-like mode structure of mode-locked lasers, whose repetition rate and carrier envelope phase can be stabilized. Here, we report an entirely novel approach in which equally spaced frequency markers are generated from a continuous wave (CW) pump laser of a known frequency interacting with the modes of a monolithic high-Q microresonator13 via the Kerr nonlinearity. The intrinsically broadband nature of parametric gain enables the generation of discrete comb modes over a 500 nm wide span (ca. 70 THz) around 1550 nm without relying on any external spectral broadening. Optical-heterodyne-based measurements reveal that cascaded parametric interactions give rise to an optical frequency comb, overcoming passive cavity dispersion. The uniformity of the mode spacing has been verified to within a relative experimental precision of 7.3*10(-18). △ Less

Submitted 4 August, 2007; originally announced August 2007.

Comments: Manuscript and Supplementary Information

Journal ref: Nature 450, 1214-1217, 2007

High-precision wavelength calibration of astronomical spectrographs with laser frequency combs

Authors: M. T. Murphy, Th. Udem, R. Holzwarth, A. Sizmann, L. Pasquini, C. Araujo-Hauck, H. Dekker, S. D'Odorico, M. Fischer, T. W. Hänsch, A. Manescau

Abstract: We describe a possible new technique for precise wavelength calibration of high-resolution astronomical spectrographs using femtosecond-pulsed mode-locked lasers controlled by stable oscillators such as atomic clocks. Such `frequency combs' provide a series of narrow modes which are uniformly spaced according to the laser's pulse repetition rate and whose absolute frequencies are known a priori… ▽ More We describe a possible new technique for precise wavelength calibration of high-resolution astronomical spectrographs using femtosecond-pulsed mode-locked lasers controlled by stable oscillators such as atomic clocks. Such `frequency combs' provide a series of narrow modes which are uniformly spaced according to the laser's pulse repetition rate and whose absolute frequencies are known a priori with relative precision better than 10^{-12}. Simulations of frequency comb spectra show that the photon-limited wavelength calibration precision achievable with existing echelle spectrographs should be ~1 cm/s when integrated over a 4000A range. Moreover, comb spectra may be used to accurately characterise distortions of the wavelength scale introduced by the spectrograph and detector system. The simulations show that frequency combs with pulse repetition rates of 5-30GHz are required, given the typical resolving power of existing and possible future echelle spectrographs. Achieving such high repetition rates, together with the desire to produce all comb modes with uniform intensity over the entire optical range, represent the only significant challenges in the design of a practical system. Frequency comb systems may remove wavelength calibration uncertainties from all practical spectroscopic experiments, even those combining data from different telescopes over many decades. △ Less

Submitted 28 June, 2007; v1 submitted 23 March, 2007; originally announced March 2007.

Comments: 10 pages, 6 figures, 1 table. Accepted by MNRAS. v2: Fig. 3 augmented and minor changes to text (including extended title)

Journal ref: Mon.Not.Roy.Astron.Soc.380:839-847,2007

Photoionization Broadening of the 1S-2S Transition in a Beam of Atomic Hydrogen

Authors: N. Kolachevsky, M. Haas, U. D. Jentschura, M. Herrmann, P. Fendel, M. Fischer, R. Holzwarth, Th. Udem, C. H. Keitel, T. W. Haensch

Abstract: We consider the excitation dynamics of the two-photon \sts transition in a beam of atomic hydrogen by 243 nm laser radiation. Specifically, we study the impact of ionization dam** on the transition line shape, caused by the possibility of ionization of the 2S level by the same laser field. Using a Monte-Carlo simulation, we calculate the line shape of the \sts transition for the experimental g… ▽ More We consider the excitation dynamics of the two-photon \sts transition in a beam of atomic hydrogen by 243 nm laser radiation. Specifically, we study the impact of ionization dam** on the transition line shape, caused by the possibility of ionization of the 2S level by the same laser field. Using a Monte-Carlo simulation, we calculate the line shape of the \sts transition for the experimental geometry used in the two latest absolute frequency measurements (M. Niering {\it et al.}, PRL 84, 5496 (2000) and M. Fischer {\it et al.}, PRL 92, 230802 (2004)). The calculated line shift and line width are in excellent agreement with the experimentally observed values. From this comparison we can verify the values of the dynamic Stark shift coefficient for the \sts transition for the first time on a level of 15%. We show that the ionization modifies the velocity distribution of the metastable atoms, the line shape of the \sts transition, and has an influence on the derivation of its absolute frequency. △ Less

Submitted 15 September, 2006; originally announced September 2006.

Comments: 10 pages, 5 figures

Journal ref: Phys. Rev. A 74, 052504 (2006)