Showing 1–50 of 115 results for author: Conti, S

High-precision chemical quantum sensing in flowing monodisperse microdroplets

Authors: Adrisha Sarkar, Zachary Jones, Madhur Parashar, Emanuel Druga, Amala Akkiraju, Sophie Conti, Pranav Krishnamoorthi, Srisai Nachuri, Parker Aman, Mohammad Hashemi, Nicholas Nunn, Marco Torelli, Benjamin Gilbert, Kevin R. Wilson, Olga Shenderova, Deepti Tanjore, Ashok Ajoy

Abstract: We report on a novel flow-based method for high-precision chemical detection that integrates quantum sensing with droplet microfluidics. We deploy nanodiamond particles hosting fluorescent nitrogen vacancy defects as quantum sensors in flowing, monodisperse, picoliter-volume microdroplets containing analyte molecules. ND motion within these microcompartments facilitates close sensor-analyte intera… ▽ More We report on a novel flow-based method for high-precision chemical detection that integrates quantum sensing with droplet microfluidics. We deploy nanodiamond particles hosting fluorescent nitrogen vacancy defects as quantum sensors in flowing, monodisperse, picoliter-volume microdroplets containing analyte molecules. ND motion within these microcompartments facilitates close sensor-analyte interaction and mitigates particle heterogeneity. Microdroplet flow rates are rapid (upto 4cm/s) and with minimal drift. Pairing this controlled flow with microwave control of NV electronic spins, we introduce a new noise-suppressed mode of Optically Detected Magnetic Resonance that is sensitive to chemical analytes while resilient against experimental variations, achieving detection of analyte-induced signals at an unprecedented level of a few hundredths of a percent of the ND fluorescence. We demonstrate its application to detecting paramagnetic ions in droplets with simultaneously low limit-of-detection and low analyte volumes, in a manner significantly better than existing technologies. This is combined with exceptional measurement stability over >103s and across hundreds of thousands of droplets, while utilizing minimal sensor volumes and incurring low ND costs (<$0.70 for an hour of operation). Additionally, we demonstrate using these droplets as micro-confinement chambers by co-encapsulating ND quantum sensors with analytes, including single cells. This versatility suggests wide-ranging applications, like single-cell metabolomics and real-time intracellular measurements in bioreactors. Our work paves the way for portable, high-sensitivity, amplification-free, chemical assays with high throughput; introduces a new chemical imaging tool for probing chemical reactions in microenvironments; and establishes the foundation for develo** movable, arrayed quantum sensors through droplet microfluidics. △ Less

Submitted 30 April, 2024; originally announced April 2024.

Homogenization and continuum limit of mechanical metamaterials

Authors: M. P. Ariza, S. Conti, M. Ortiz

Abstract: When used in bulk applications, mechanical metamaterials set forth a multiscale problem with many orders of magnitude in scale separation between the micro and macro scales. However, mechanical metamaterials fall outside conventional homogenization theory on account of the flexural, or bending, response of their members, including torsion. We show that homogenization theory, based on calculus of v… ▽ More When used in bulk applications, mechanical metamaterials set forth a multiscale problem with many orders of magnitude in scale separation between the micro and macro scales. However, mechanical metamaterials fall outside conventional homogenization theory on account of the flexural, or bending, response of their members, including torsion. We show that homogenization theory, based on calculus of variations and notions of Gamma-convergence, can be extended to account for bending. The resulting homogenized metamaterials exhibit intrinsic generalized elasticity in the continuum limit. We illustrate these properties in specific examples including two-dimensional honeycomb and three-dimensional octet-truss metamaterials. △ Less

Submitted 18 March, 2024; originally announced March 2024.

Optimal rigidity estimates for maps of a compact Riemannian manifold to itself

Authors: Sergio Conti, Georg Dolzmann, Stefan Müller

Abstract: Let $M$ be a smooth, compact, connected, oriented Riemannian manifold, and let $\imath: M \to \mathbb R^d$ be an isometric embedding. We show that a Sobolev map $f: M \to M$ which has the property that the differential $df(q)$ is close to the set $SO(T_q M, T_{f(q)} M)$ of orientation preserving isometries (in an $L^p$ sense) is already $W^{1,p}$ close to a global isometry of $M$. More precisely w… ▽ More Let $M$ be a smooth, compact, connected, oriented Riemannian manifold, and let $\imath: M \to \mathbb R^d$ be an isometric embedding. We show that a Sobolev map $f: M \to M$ which has the property that the differential $df(q)$ is close to the set $SO(T_q M, T_{f(q)} M)$ of orientation preserving isometries (in an $L^p$ sense) is already $W^{1,p}$ close to a global isometry of $M$. More precisely we prove for $p \in (1,\infty)$ the optimal linear estimate $$\inf_{φ\in \mathrm{Isom}_+(M)} \| \imath \circ f - \imath \circ φ\|_{W^{1,p}}^p \le C E_p(f)$$ where $$ E_p(f) := \int_M {\rm dist}^p(df(q), SO(T_q M, T_{f(q)} M)) \, d{\rm vol}_M$$ and where $\mathrm{Isom}_+(M)$ denotes the group of orientation preserving isometries of $M$. This extends the Euclidean rigidity estimate of Friesecke-James-Müller [Comm. Pure Appl. Math. {\bf 55} (2002), 1461--1506] to Riemannian manifolds. It also extends the Riemannian stability result of Kupferman-Maor-Shachar [Arch. Ration. Mech. Anal. {\bf 231} (2019), 367--408] for sequences of maps with $E_p(f_k) \to 0$ to an optimal quantitative estimate. The proof relies on the weak Riemannian Piola identity of Kupferman-Maor-Shachar, a uniform $C^{1,α}$ approximation through the harmonic map heat flow, and a linearization argument which reduces the estimate to the well-known Riemannian version of Korn's inequality. △ Less

Submitted 9 February, 2024; originally announced February 2024.

Effects of intra-layer correlations on electron-hole double-layer superfluidity

Authors: Filippo Pascucci, Sara Conti, Andrea Perali, Jacques Tempere, David Neilson

Abstract: We investigate the correlations acting within the layers in a superfluid system of electron-hole spatially separated layers. In this system of quasi-dipoles, the dominant correlations are Hartree--Fock. We find in the BEC regime of the superfluid where screening is negligible, that the effect of the correlations on superfluid properties is also negligible. However, in the BCS-BEC crossover regime,… ▽ More We investigate the correlations acting within the layers in a superfluid system of electron-hole spatially separated layers. In this system of quasi-dipoles, the dominant correlations are Hartree--Fock. We find in the BEC regime of the superfluid where screening is negligible, that the effect of the correlations on superfluid properties is also negligible. However, in the BCS-BEC crossover regime, where the screening plays a crucial role, we find that the superfluid gap is significantly weakened because the correlations significantly boost the number of low-energy particle-hole excitations participating in the screening process. Finally, the intralayer correlations are found in this system to suppress a predicted phenomenon in which the average pair size passes through a minimum as the crossover regime is traversed. In the presence of intralayer correlations, the minimum is either extremely weak or completely absent. △ Less

Submitted 18 October, 2023; originally announced October 2023.

Approximation of $SBV$ functions with possibly infinite jump set

Authors: Sergio Conti, Matteo Focardi, Flaviana Iurlano

Abstract: We prove an approximation result for functions $u\in SBV(Ω;\mathbb R^m)$ such that $\nabla u$ is $p$-integrable, $1\leq p<\infty$, and $g_0(|[u]|)$ is integrable over the jump set (whose $\mathcal H^{n-1}$ measure is possibly infinite), for some continuous, nondecreasing, subadditive function $g_0$, with $g_0^{-1}(0)=\{0\}$. The approximating functions $u_j$ are piecewise affine with piecewise aff… ▽ More We prove an approximation result for functions $u\in SBV(Ω;\mathbb R^m)$ such that $\nabla u$ is $p$-integrable, $1\leq p<\infty$, and $g_0(|[u]|)$ is integrable over the jump set (whose $\mathcal H^{n-1}$ measure is possibly infinite), for some continuous, nondecreasing, subadditive function $g_0$, with $g_0^{-1}(0)=\{0\}$. The approximating functions $u_j$ are piecewise affine with piecewise affine jump set; the convergence is that of $L^1$ for $u_j$ and the convergence in energy for $|\nabla u_j|^p$ and $g([u_j],ν_{u_j})$ for suitable functions $g$. In particular, $u_j$ converges to $u$ $BV$-strictly, area-strictly, and strongly in $BV$ after composition with a bilipschitz map. If in addition $\mathcal H^{n-1}(J_u)<\infty$, we also have convergence of $\mathcal H^{n-1}(J_{u_j})$ to $\mathcal H^{n-1}(J_u)$. △ Less

Submitted 28 September, 2023; originally announced September 2023.

Data-Driven Games in Computational Mechanics

Authors: Kerstin Weinberg, Laurent Strainier, Sergio Conti, Michael Ortiz

Abstract: We resort to game theory in order to formulate Data-Driven methods for solid mechanics in which stress and strain players pursue different objectives. The objective of the stress player is to minimize the discrepancy to a material data set, whereas the objective of the strain player is to ensure the admissibility of the mechanical state, in the sense of compatibility and equilibrium. We show that,… ▽ More We resort to game theory in order to formulate Data-Driven methods for solid mechanics in which stress and strain players pursue different objectives. The objective of the stress player is to minimize the discrepancy to a material data set, whereas the objective of the strain player is to ensure the admissibility of the mechanical state, in the sense of compatibility and equilibrium. We show that, unlike the cooperative Data-Driven games proposed in the past, the new non-cooperative Data-Driven games identify an effective material law from the data and reduce to conventional displacement boundary-value problems, which facilitates their practical implementation. However, unlike supervised machine learning methods, the proposed non-cooperative Data-Driven games are unsupervised, ansatz-free and parameter-free. In particular, the effective material law is learned from the data directly, without recourse to regression to a parameterized class of functions such as neural networks. We present analysis that elucidates sufficient conditions for convergence of the Data-Driven solutions with respect to the data. We also present selected examples of implementation and application that demonstrate the range and versatility of the approach. △ Less

Submitted 26 May, 2023; originally announced May 2023.

Flattening conduction and valence bands for interlayer excitons in a moiré MoS$_2$/WSe$_2$ heterobilayer

Authors: Sara Conti, Andrey Chaves, Tribhuwan Pandey, Lucian Covaci, François M. Peeters, David Neilson, Milorad V. Milošević

Abstract: We explore the flatness of conduction and valence bands of interlayer excitons in MoS$_2$/WSe$_2$ van der Waals heterobilayers, tuned by interlayer twist angle, pressure, and external electric field. We employ an efficient continuum model where the moiré pattern from lattice mismatch and/or twisting is represented by an equivalent mesoscopic periodic potential. We demonstrate that the mismatch moi… ▽ More We explore the flatness of conduction and valence bands of interlayer excitons in MoS$_2$/WSe$_2$ van der Waals heterobilayers, tuned by interlayer twist angle, pressure, and external electric field. We employ an efficient continuum model where the moiré pattern from lattice mismatch and/or twisting is represented by an equivalent mesoscopic periodic potential. We demonstrate that the mismatch moiré potential is too weak to produce significant flattening. Moreover, we draw attention to the fact that the quasi-particle effective masses around the $Γ$-point and the band flattening are \textit{reduced} with twisting. As an alternative approach, we show (i) that reducing the interlayer distance by uniform vertical pressure can significantly increase the effective mass of the moiré hole, and (ii) that the moiré depth and its band flattening effects are strongly enhanced by accessible electric gating fields perpendicular to the heterobilayer, with resulting electron and hole effective masses increased by more than an order of magnitude leading to record-flat bands. These findings impose boundaries on the commonly generalized benefits of moiré twistronics, while also revealing alternate feasible routes to achieve truly flat electron and hole bands to carry us to strongly correlated excitonic phenomena on demand. △ Less

Submitted 14 March, 2023; originally announced March 2023.

Journal ref: Nanoscale, 2023,15, 14032-14042

Functions with bounded Hessian-Schatten variation: density, variational and extremality properties

Authors: Luigi Ambrosio, Camillo Brena, Sergio Conti

Abstract: In this paper we analyze in detail a few questions related to the theory of functions with bounded $p$-Hessian-Schatten total variation, which are relevant in connection with the theory of inverse problems and machine learning. We prove an optimal density result, relative to the $p$-Hessian-Schatten total variation, of continuous piecewise linear (CPWL) functions in any space dimension $d$, using… ▽ More In this paper we analyze in detail a few questions related to the theory of functions with bounded $p$-Hessian-Schatten total variation, which are relevant in connection with the theory of inverse problems and machine learning. We prove an optimal density result, relative to the $p$-Hessian-Schatten total variation, of continuous piecewise linear (CPWL) functions in any space dimension $d$, using a construction based on a mesh whose local orientation is adapted to the function to be approximated. We show that not all extremal functions with respect to the $p$-Hessian-Schatten total variation are CPWL. Finally, we prove existence of minimizers of certain relevant functionals involving the $p$-Hessian-Schatten total variation in the critical dimension $d=2$. △ Less

Submitted 24 February, 2023; originally announced February 2023.

Convergence rates for ansatz-free data-driven inference in physically constrained problems

Authors: Sergio Conti, Franca Hoffmann, Michael Ortiz

Abstract: We study a Data-Driven approach to inference in physical systems in a measure-theoretic framework. The systems under consideration are characterized by two measures defined over the phase space: i) A physical likelihood measure expressing the likelihood that a state of the system be admissible, in the sense of satisfying all governing physical laws; ii) A material likelihood measure expressing the… ▽ More We study a Data-Driven approach to inference in physical systems in a measure-theoretic framework. The systems under consideration are characterized by two measures defined over the phase space: i) A physical likelihood measure expressing the likelihood that a state of the system be admissible, in the sense of satisfying all governing physical laws; ii) A material likelihood measure expressing the likelihood that a local state of the material be observed in the laboratory. We assume deterministic loading, which means that the first measure is supported on a linear subspace. We additionally assume that the second measure is only known approximately through a sequence of empirical (discrete) measures. We develop a method for the quantitative analysis of convergence based on the flat metric and obtain error bounds both for annealing and the discretization or sampling procedure, leading to the determination of appropriate quantitative annealing rates. Finally, we provide an example illustrating the application of the theory to transportation networks. △ Less

Submitted 20 September, 2022; originally announced October 2022.

MSC Class: 65C20; 35J20; 49J45

Line-tension limits for line singularities and application to the mixed-growth case

Authors: Sergio Conti, Adriana Garroni, Roberta Marziani

Abstract: We study variational models for dislocations in three dimensions in the line-tension scaling. We present a unified approach which allows to treat energies with subquadratic growth at infinity and other regularizations of the singularity near the dislocation lines. We show that the asymptotics via Gamma convergence is independent of the specific choice of the energy and of the regularization proced… ▽ More We study variational models for dislocations in three dimensions in the line-tension scaling. We present a unified approach which allows to treat energies with subquadratic growth at infinity and other regularizations of the singularity near the dislocation lines. We show that the asymptotics via Gamma convergence is independent of the specific choice of the energy and of the regularization procedure. △ Less

Submitted 4 July, 2022; originally announced July 2022.

Comments: 65 pages

An energy minimization approach to twinning with variable volume fraction

Authors: Sergio Conti, Robert Kohn, Oleksandr Misiats

Abstract: In materials that undergo martensitic phase transformation, macroscopic loading often leads to the creation and/or rearrangement of elastic domains. This paper considers an example {involving} a single-crystal slab made from two martensite variants. When the slab is made to bend, the two variants form a characteristic microstructure that we like to call ``twinning with variable volume fraction.''… ▽ More In materials that undergo martensitic phase transformation, macroscopic loading often leads to the creation and/or rearrangement of elastic domains. This paper considers an example {involving} a single-crystal slab made from two martensite variants. When the slab is made to bend, the two variants form a characteristic microstructure that we like to call ``twinning with variable volume fraction.'' Two 1996 papers by Chopra et. al. explored this example using bars made from InTl, providing considerable detail about the microstructures they observed. Here we offer an energy-minimization-based model that is motivated by their account. It uses geometrically linear elasticity, and treats the phase boundaries as sharp interfaces. For simplicity, rather than model the experimental forces and boundary conditions exactly, we consider certain Dirichlet or Neumann boundary conditions whose effect is to require bending. This leads to certain nonlinear (and nonconvex) variational problems that represent the minimization of elastic plus surface energy (and the work done by the load, in the case of a Neumann boundary condition). Our results identify how the minimum value of each variational problem scales with respect to the surface energy density. The results are established by proving upper and lower bounds that scale the same way. The upper bounds are ansatz-based, providing full details about some (nearly) optimal microstructures. The lower bounds are ansatz-free, so they explain why no other arrangement of the two phases could be significantly better. △ Less

Submitted 20 June, 2022; originally announced June 2022.

Chester supersolid of spatially indirect excitons in double-layer semiconductor heterostructures

Authors: Sara Conti, Andrea Perali, Alexander R. Hamilton, Milorad V. Milosevic, Francois M. Peeters, David Neilson

Abstract: A supersolid, a counter-intuitive quantum state in which a rigid lattice of particles flows without resistance, has to date not been unambiguously realised. Here we reveal a supersolid ground state of excitons in a double-layer semiconductor heterostructure over a wide range of layer separations outside the focus of recent experiments. This supersolid conforms to the original Chester supersolid wi… ▽ More A supersolid, a counter-intuitive quantum state in which a rigid lattice of particles flows without resistance, has to date not been unambiguously realised. Here we reveal a supersolid ground state of excitons in a double-layer semiconductor heterostructure over a wide range of layer separations outside the focus of recent experiments. This supersolid conforms to the original Chester supersolid with one exciton per supersolid site, as distinct from the alternative version reported in cold-atom systems of a periodic modulation of the superfluid density. We provide the phase diagram augmented by the supersolid. This new phase appears at layer separations much smaller than the predicted exciton normal solid, and it persists up to a solid--solid transition where the quantum phase coherence collapses. The ranges of layer separations and exciton densities in our phase diagram are well within reach of the current experimental capabilities. △ Less

Submitted 13 May, 2022; originally announced May 2022.

Phase-field approximation of a vectorial, geometrically nonlinear cohesive fracture energy

Authors: Sergio Conti, Matteo Focardi, Flaviana Iurlano

Abstract: We consider a family of vectorial models for cohesive fracture, which may incorporate $\mathrm{SO}(n)$-invariance. The deformation belongs to the space of generalized functions of bounded variation and the energy contains an (elastic) volume energy, an opening-dependent jump energy concentrated on the fractured surface, and a Cantor part representing diffuse damage. We show that this type of funct… ▽ More We consider a family of vectorial models for cohesive fracture, which may incorporate $\mathrm{SO}(n)$-invariance. The deformation belongs to the space of generalized functions of bounded variation and the energy contains an (elastic) volume energy, an opening-dependent jump energy concentrated on the fractured surface, and a Cantor part representing diffuse damage. We show that this type of functional can be naturally obtained as $Γ$-limit of an appropriate phase-field model. The energy densities entering the limiting functional can be expressed, in a partially implicit way, in terms of those appearing in the phase-field approximation. △ Less

Submitted 13 May, 2022; originally announced May 2022.

Josephson effect as signature of electron-hole superfluidity in bilayers of van der Waals heterostructures

Authors: Filippo Pascucci, Sara Conti, David Neilson, Jacques Tempere, Andrea Perali

Abstract: We investigate a Josephson junction in an electron-hole superfluid in a double layer TMD heterostructure. Observation of a critical tunneling current is a clear signature of superfluidity. In addition, we find the BCS-BEC crossover physics in the narrow barrier region controls the critical current across the entire system. The corresponding critical velocity, which is measurable in this system, ha… ▽ More We investigate a Josephson junction in an electron-hole superfluid in a double layer TMD heterostructure. Observation of a critical tunneling current is a clear signature of superfluidity. In addition, we find the BCS-BEC crossover physics in the narrow barrier region controls the critical current across the entire system. The corresponding critical velocity, which is measurable in this system, has a maximum when the excitations pass from bosonic to fermionic. Remarkably, this occurs for the density at the boundary of the BEC to BCS-BEC crossover regime determined from the condensate fraction. This provides, for the first time in a semiconductor system, an experimental way to determine the position of this boundary. △ Less

Submitted 12 May, 2022; originally announced May 2022.

Observation of a critical prethermal discrete time crystal created by two-frequency driving

Authors: William Beatrez, Christoph Fleckenstein, Arjun Pillai, Erica Sanchez, Amala Akkiraju, Jesus Alcala, Sophie Conti, Paul Reshetikhin, Emanuel Druga, Marin Bukov, Ashok Ajoy

Abstract: We report the observation of long-lived Floquet prethermal discrete time crystalline (PDTC) order in a three-dimensional position-disordered lattice of interacting dipolar-coupled 13C nuclei in diamond at room temperature. We demonstrate a novel strategy of "two-frequency" driving, involving an interleaved application of slow and fast drives that simultaneously prethermalize the spins with an emer… ▽ More We report the observation of long-lived Floquet prethermal discrete time crystalline (PDTC) order in a three-dimensional position-disordered lattice of interacting dipolar-coupled 13C nuclei in diamond at room temperature. We demonstrate a novel strategy of "two-frequency" driving, involving an interleaved application of slow and fast drives that simultaneously prethermalize the spins with an emergent quasi-conserved magnetization along the x-axis, while enabling continuous and highly resolved observation of their dynamic evolution when periodically kicked away from x. The PDTC order manifests itself in a robust period doubling response of this drive-induced quasi-conserved spin magnetization interchanging between x and -x; our experiments allow a unique means to study the formation and melting of PDTC order. We obtain movies of the time-crystalline response with a clarity and throughput orders of magnitude greater than previous experiments. Parametric control over the drive frequencies allows us to reach PDTC lifetimes up to 396 Floquet cycles which we measure in a single-shot experiment. Such rapid measurement enables detailed characterization of the entire PDTC phase diagram, rigidity and lifetime, informing on the role of prethermalization towards stabilizing the DTC response. The two-frequency drive approach represents the simplest generalization of DTCs to multi-frequency drives; it expands the toolkit for realizing and investigating long-lived non-equilibrium phases of matter stabilized by emergent quasi-conservation laws. △ Less

Submitted 18 August, 2022; v1 submitted 6 January, 2022; originally announced January 2022.

Comments: 8 pages, 5 figures. SI: 15 pages, 19 figures. 4 anc movie files (also available on Youtube)

Journal ref: Nat. Phys. 19, 407-413 (2023)

High-Field Magnetometry with Hyperpolarized Nuclear Spins

Authors: Ozgur Sahin, Erica de Leon Sanchez, Sophie Conti, Amala Akkiraju, Paul Reshetikhin, Emanuel Druga, Aakriti Aggarwal, Benjamin Gilbert, Sunil Bhave, Ashok Ajoy

Abstract: Quantum sensors have attracted broad interest in the quest towards sub-micronscale NMR spectroscopy. Such sensors predominantly operate at low magnetic fields. Instead, however, for high resolution spectroscopy, the high-field regime is naturally advantageous because it allows high absolute chemical shift discrimination. Here we propose and demonstrate a high-field spin magnetometer constructed fr… ▽ More Quantum sensors have attracted broad interest in the quest towards sub-micronscale NMR spectroscopy. Such sensors predominantly operate at low magnetic fields. Instead, however, for high resolution spectroscopy, the high-field regime is naturally advantageous because it allows high absolute chemical shift discrimination. Here we propose and demonstrate a high-field spin magnetometer constructed from an ensemble of hyperpolarized ${}^{13}C$ nuclear spins in diamond. The ${}^{13}C$ nuclei are initialized via Nitrogen Vacancy (NV) centers and protected along a transverse Bloch sphere axis for minute-long periods. When exposed to a time-varying (AC) magnetic field, they undergo secondary precessions that carry an imprint of its frequency and amplitude. The method harnesses long rotating frame ${}^{13}C$ sensor lifetimes $T_2^{\prime}{>}$20s, and their ability to be continuously interrogated. For quantum sensing at 7T and a single crystal sample, we demonstrate spectral resolution better than 100 mHz (corresponding to a frequency precision ${<}$1ppm) and single-shot sensitivity better than 70pT. We discuss the advantages of nuclear spin magnetometers over conventional NV center sensors, including deployability in randomly-oriented diamond particles and in optically scattering media. Since our technique employs densely-packed ${}^{13}C$ nuclei as sensors, it demonstrates a new approach for magnetometry in the "coupled-sensor" limit. This work points to interesting opportunities for microscale NMR chemical sensors constructed from hyperpolarized nanodiamonds and suggests applications of dynamic nuclear polarization (DNP) in quantum sensing. △ Less

Submitted 21 December, 2021; originally announced December 2021.

Two-scale elastic shape optimization for additive manufacturing

Authors: Sergio Conti, Martin Rumpf, Stefan Simon

Abstract: In this paper, a two-scale approach for elastic shape optimization of fine-scale structures in additive manufacturing is investigated. To this end, a free material optimization is performed on the macro-scale using elasticity tensors in a set of microscopically realizable tensors. A database of these realizable tensors and their cost values is obtained with a shape and topology optimization on mic… ▽ More In this paper, a two-scale approach for elastic shape optimization of fine-scale structures in additive manufacturing is investigated. To this end, a free material optimization is performed on the macro-scale using elasticity tensors in a set of microscopically realizable tensors. A database of these realizable tensors and their cost values is obtained with a shape and topology optimization on microscopic cells, working within a fixed set of elasticity tensors samples. This microscopic optimization takes into account manufacturability constraints via predefined material bridges to neighbouring cells at the faces of the microscopic fundamental cell. For the actual additive manufacturing on a chosen fine-scale, a piece-wise constant elasticity tensor ansatz on grid cells of a macroscopic mesh is applied. The macroscopic optimization is performed in an efficient online phase, whereas the associated cell-wise optimal material patterns are retrieved from the database that was computed offline. For that, the set of admissible realizable elasticity tensors is parametrized using tensor product cubic B-splines over the unit square matching the precomputed samples. This representation is then efficiently used in an interior point method for the free material optimization on the macro-scale. △ Less

Submitted 27 July, 2022; v1 submitted 29 November, 2021; originally announced November 2021.

Variational Modeling of Paperboard Delamination Under Bending

Authors: Patrick Dondl, Sergio Conti, Julia Orlik

Abstract: We develop and analyze a variational model for multi-ply (i.e., multi-layered) paperboard. The model consists of a number of elastic sheets of a given thickness, which -- at the expense of an energy per unit area -- may delaminate. By providing an explicit construction for possible admissible deformations subject to boundary conditions that introduce a single bend, we discover a rich variety of en… ▽ More We develop and analyze a variational model for multi-ply (i.e., multi-layered) paperboard. The model consists of a number of elastic sheets of a given thickness, which -- at the expense of an energy per unit area -- may delaminate. By providing an explicit construction for possible admissible deformations subject to boundary conditions that introduce a single bend, we discover a rich variety of energetic regimes. The regimes correspond to the experimentally observed: initial purely elastic response for small bending angle and the formation of a localized inelastic, delaminated hinge once the angle reaches a critical value. Our scaling upper bound then suggests the occurrence of several additional regimes as the angle increases. The upper bounds for the energy are partially matched by scaling lower bounds. △ Less

Submitted 16 October, 2021; originally announced October 2021.

Comments: 27 pages, 6 figures

MSC Class: 35Q74; 74B20; 74R10; 74G65

Electron-to-nuclear spectral map** via "Galton board" dynamic nuclear polarization

Authors: Arjun Pillai, Moniish Elanchezhian, Teemu Virtanen, Sophie Conti, Ashok Ajoy

Abstract: We report on a strategy to indirectly readout the spectrum of an electronic spin via polarization transfer to nuclear spins in its local environment. The nuclear spins are far more abundant and have longer lifetimes, allowing repeated polarization accumulation in them. Subsequent nuclear interrogation can reveal information about the electronic spectral density of states. We experimentally demonst… ▽ More We report on a strategy to indirectly readout the spectrum of an electronic spin via polarization transfer to nuclear spins in its local environment. The nuclear spins are far more abundant and have longer lifetimes, allowing repeated polarization accumulation in them. Subsequent nuclear interrogation can reveal information about the electronic spectral density of states. We experimentally demonstrate the method for reading out the ESR spectrum of Nitrogen Vacancy center electrons in diamond via readout of lattice 13C nuclei. Spin-lock control on the 13C nuclei yields significantly enhanced signal-to-noise for the nuclear readout. Spectrally mapped readout presents operational advantages in being background-free and immune to crystal orientation and optical scattering. We harness these advantages to demonstrate applications in underwater magnetometry. The physical basis for the "one-to-many" spectral map is itself intriguing. To uncover its origin, we develop a theoretical model that maps the system dynamics, involving traversal of a cascaded structure of Landau-Zener anti-crossings, to the operation of a tilted "Galton board". This work points to new opportunities for "ESR-via-NMR" in dilute electronic systems, and in hybrid electron-nuclear quantum memories and sensors. △ Less

Submitted 17 October, 2021; v1 submitted 13 October, 2021; originally announced October 2021.

Comments: 5 pages, 4 figures. SI: 1 page, 2 figures

Journal ref: J. Chem. Phys. 159, 154201 (2023)

Model-free Data-Driven Inference

Authors: Sergio Conti, Franca Hoffmann, Michael Ortiz

Abstract: We present a model-free data-driven inference method that enables inferences on system outcomes to be derived directly from empirical data without the need for intervening modeling of any type, be it modeling of a material law or modeling of a prior distribution of material states. We specifically consider physical systems with states characterized by points in a phase space determined by the gove… ▽ More We present a model-free data-driven inference method that enables inferences on system outcomes to be derived directly from empirical data without the need for intervening modeling of any type, be it modeling of a material law or modeling of a prior distribution of material states. We specifically consider physical systems with states characterized by points in a phase space determined by the governing field equations. We assume that the system is characterized by two likelihood measures: one $μ_D$ measuring the likelihood of observing a material state in phase space; and another $μ_E$ measuring the likelihood of states satisfying the field equations, possibly under random actuation. We introduce a notion of intersection between measures which can be interpreted to quantify the likelihood of system outcomes. We provide conditions under which the intersection can be characterized as the athermal limit $μ_\infty$ of entropic regularizations $μ_β$, or thermalizations, of the product measure $μ= μ_D\times μ_E$ as $β\to +\infty$. We also supply conditions under which $μ_\infty$ can be obtained as the athermal limit of carefully thermalized $(μ_{h,β_h})$ sequences of empirical data sets $(μ_h)$ approximating weakly an unknown likelihood function $μ$. In particular, we find that the cooling sequence $β_h \to +\infty$ must be slow enough, corresponding to quenching, in order for the proper limit $μ_\infty$ to be delivered. Finally, we derive explicit analytic expressions for expectations $\mathbb{E}[f]$ of outcomes $f$ that are explicit in the data, thus demonstrating the feasibility of the model-free data-driven paradigm as regards making convergent inferences directly from the data without recourse to intermediate modeling steps. △ Less

Submitted 4 June, 2021; originally announced June 2021.

MSC Class: 28A33; 74A99; 62F30; 41A29

Density of polyhedral partitions

Authors: Andrea Braides, Sergio Conti, Adriana Garroni

Abstract: We prove the density of polyhedral partitions in the set of finite Caccioppoli partitions. Precisely, we consider a decomposition $u$ of a bounded Lipschitz set $Ω\subset\mathbb R^n$ into finitely many subsets of finite perimeter, which can be identified with a function in $SBV_{\rm loc}(Ω;{\cal Z})$ with ${\cal Z}\subset \mathbb R^N$ a finite set of parameters. For all $\varepsilon>0$ we prove th… ▽ More We prove the density of polyhedral partitions in the set of finite Caccioppoli partitions. Precisely, we consider a decomposition $u$ of a bounded Lipschitz set $Ω\subset\mathbb R^n$ into finitely many subsets of finite perimeter, which can be identified with a function in $SBV_{\rm loc}(Ω;{\cal Z})$ with ${\cal Z}\subset \mathbb R^N$ a finite set of parameters. For all $\varepsilon>0$ we prove that such a $u$ is $\varepsilon$-close to a small deformation of a polyhedral decomposition $v_\varepsilon$, in the sense that there is a $C^1$ diffeomorphism $f_\varepsilon:\mathbb R^n\to\mathbb R^n$ which is $\varepsilon$-close to the identity and such that $u\circ f_\varepsilon-v_\varepsilon$ is $\varepsilon$-small in the strong $BV$ norm. This implies that the energy of $u$ is close to that of $v_\varepsilon$ for a large class of energies defined on partitions. Such type of approximations are very useful in order to simplify computations in the estimates of $Γ$-limits. △ Less

Submitted 30 May, 2021; originally announced May 2021.

Journal ref: Calculus of Variations and Partial Differential Equations 56 (2017), Article number: 28

A Pessimistic Bilevel Stochastic Problem for Elastic Shape Optimization

Authors: Johanna Burtscheidt, Matthias Claus, Sergio Conti, Martin Rumpf, Josua Sassen, Rüdiger Schultz

Abstract: We consider pessimistic bilevel stochastic programs in which the follower maximizes over a fixed compact convex set a strictly convex quadratic function, whose Hessian depends on the leader's decision. The resulting random variable is evaluated by a convex risk measure. Under assumptions including real analyticity of the lower-level goal function, we prove existence of optimal solutions. We discus… ▽ More We consider pessimistic bilevel stochastic programs in which the follower maximizes over a fixed compact convex set a strictly convex quadratic function, whose Hessian depends on the leader's decision. The resulting random variable is evaluated by a convex risk measure. Under assumptions including real analyticity of the lower-level goal function, we prove existence of optimal solutions. We discuss an alternate model where the leader hedges against optimal lower-level solutions, and show that in this case solvability can be guaranteed under weaker conditions both in a deterministic and in a stochastic setting. The approach is applied to a mechanical shape optimization problem in which the leader decides on an optimal material distribution to minimize a tracking-type cost functional, whereas the follower chooses forces from an admissible set to maximize a compliance objective. The material distribution is considered to be stochastically perturbed in the actual construction phase. Computational results illustrate the bilevel optimization concept and demonstrate the interplay of follower and leader in shape design and testing. △ Less

Submitted 29 November, 2021; v1 submitted 3 March, 2021; originally announced March 2021.

MSC Class: 49J55; 49M41; 74K25; 90C15; 91A65

Journal ref: Mathematical Programming (2021)

Electron-hole superfluidity in strained Si/Ge type II heterojunctions

Authors: Sara Conti, Samira Saberi Pouya, Andrea Perali, Michele Virgilio, Francois M. Peeters, Alexander R. Hamilton, Giordano Scappucci, David Neilson

Abstract: Excitons are promising candidates for generating superfluidity and Bose-Einstein Condensation (BEC) in solid state devices, but an enabling material platform with in-built bandstructure advantages and scaling compatibility with industrial semiconductor technology is lacking. Here we predict that spatially indirect excitons in a lattice-matched strained Si/Ge bilayer embedded into a germanium-rich… ▽ More Excitons are promising candidates for generating superfluidity and Bose-Einstein Condensation (BEC) in solid state devices, but an enabling material platform with in-built bandstructure advantages and scaling compatibility with industrial semiconductor technology is lacking. Here we predict that spatially indirect excitons in a lattice-matched strained Si/Ge bilayer embedded into a germanium-rich SiGe crystal, would lead to observable mass-imbalanced electron-hole superfluidity and BEC. Holes would be confined in a compressively strained Ge quantum well and electrons in a lattice-matched tensile strained Si quantum well. We envision a device architecture that does not require an insulating barrier at the Si/Ge interface, since this interface offers a type II band alignment. Thus the electrons and holes can be kept very close but strictly separate, strengthening the electron-hole pairing attraction while preventing fast electron-hole recombination. The band alignment also allows a one-step procedure for making independent contacts to the electron and hole layers, overcoming a significant obstacle to device fabrication. We predict superfluidity at experimentally accessible temperatures of a few Kelvin and carrier densities up to $\sim 6\times 10^{10}$ cm$^{-2}$, while the large imbalance of the electron and hole effective masses can lead to exotic superfluid phases. △ Less

Submitted 14 December, 2020; v1 submitted 10 December, 2020; originally announced December 2020.

Naturally-Degradable Photonic Devices with Transient Function by Heterostructured Waxy-Sublimating and Water-Soluble Materials

Authors: Andrea Camposeo, Francesca D'Elia, Alberto Portone, Francesca Matino, Matteo Archimi, Silvia Conti, Gianluca Fiori, Dario Pisignano, Luana Persano

Abstract: Combined dry-wet transient materials and devices are introduced, which are based on water-dissolvable dye-doped polymers layered onto non-polar cyclic hydrocarbon sublimating substrates. Light-emitting heterostructures showing amplified spontaneous emission are used as illumination sources for speckle-free, full-field imaging, and transient optical labels are realized that incorporate QR codes wit… ▽ More Combined dry-wet transient materials and devices are introduced, which are based on water-dissolvable dye-doped polymers layered onto non-polar cyclic hydrocarbon sublimating substrates. Light-emitting heterostructures showing amplified spontaneous emission are used as illumination sources for speckle-free, full-field imaging, and transient optical labels are realized that incorporate QR codes with stably encoded information. The transient behavior is also studied at the microscopic scale, highlighting the real time evolution of material domains in the sublimating compound. Finally, the exhausted components are fully soluble in water thus being naturally degradable. △ Less

Submitted 8 December, 2020; originally announced December 2020.

Comments: 30 pages, 15 figures

Journal ref: Advanced Science, vol. 7, 2001594 (2020)

$\mathscr{A}$-Quasiconvexity and Partial Regularity

Authors: Sergio Conti, Franz Gmeineder

Abstract: We establish the first partial regularity result for local minima of strongly $\mathscr{A}$-quasiconvex integrals in the case where the differential operator $\mathscr{A}$ possesses an elliptic potential $\mathbb{A}$. As the main ingredient, the proof works by reduction to the partial regularity for full gradient functionals. Specialising to particular differential operators, the results in this p… ▽ More We establish the first partial regularity result for local minima of strongly $\mathscr{A}$-quasiconvex integrals in the case where the differential operator $\mathscr{A}$ possesses an elliptic potential $\mathbb{A}$. As the main ingredient, the proof works by reduction to the partial regularity for full gradient functionals. Specialising to particular differential operators, the results in this paper thereby equally yield novel partial regularity theorems in the cases of the trace-free symmetric gradient, the exterior derivative or the div-curl-operator. △ Less

Submitted 29 September, 2020; originally announced September 2020.

Comments: 1 figure

MSC Class: 35J50; 35J93; 49J50

Sharp rigidity estimates for incompatible fields as consequence of the Bourgain Brezis div-curl result

Authors: Sergio Conti, Adriana Garroni

Abstract: In this note we show that a sharp rigidity estimate and a sharp Korn's inequality for matrix-valued fields whose incompatibility is a bounded measure can be obtained as a consequence of a Hodge decomposition with critical integrability due to Bourgain and Brezis. In this note we show that a sharp rigidity estimate and a sharp Korn's inequality for matrix-valued fields whose incompatibility is a bounded measure can be obtained as a consequence of a Hodge decomposition with critical integrability due to Bourgain and Brezis. △ Less

Submitted 17 September, 2020; originally announced September 2020.

Derivation of strain-gradient plasticity from a generalized Peierls-Nabarro model

Authors: Sergio Conti, Adriana Garroni, Stefan Muller

Abstract: We derive strain-gradient plasticity from a nonlocal phase-field model of dislocations in a plane. Both a continuous energy with linear growth depending on a measure which characterizes the macroscopic dislocation density and a nonlocal effective energy representing the far-field interaction between dislocations arise naturally as scaling limits of the nonlocal elastic interaction. Relaxation and… ▽ More We derive strain-gradient plasticity from a nonlocal phase-field model of dislocations in a plane. Both a continuous energy with linear growth depending on a measure which characterizes the macroscopic dislocation density and a nonlocal effective energy representing the far-field interaction between dislocations arise naturally as scaling limits of the nonlocal elastic interaction. Relaxation and formation of microstructures at intermediate scales are automatically incorporated in the limiting procedure based on $Γ$-convergence. △ Less

Submitted 7 September, 2020; originally announced September 2020.

Cohesive fracture in 1D: quasi-static evolution and derivation from static phase-field models

Authors: Marco Bonacini, Sergio Conti, Flaviana Iurlano

Abstract: In this paper we propose a notion of irreversibility for the evolution of cracks in presence of cohesive forces, which allows for different responses in the loading and unloading processes, motivated by a variational approximation with damage models. We investigate its applicability to the construction of a quasi-static evolution in a simple one-dimensional model. The cohesive fracture model arise… ▽ More In this paper we propose a notion of irreversibility for the evolution of cracks in presence of cohesive forces, which allows for different responses in the loading and unloading processes, motivated by a variational approximation with damage models. We investigate its applicability to the construction of a quasi-static evolution in a simple one-dimensional model. The cohesive fracture model arises naturally via Gamma-convergence from a phase-field model of the generalized Ambrosio-Tortorelli type, which may be used as regularization for numerical simulations. △ Less

Submitted 16 October, 2020; v1 submitted 23 April, 2020; originally announced April 2020.

Energy scaling laws for geometrically linear elasticity models for microstructures in shape memory alloys

Authors: Sergio Conti, Johannes Diermeier, David Melching, Barbara Zwicknagl

Abstract: We consider a singularly-perturbed two-well problem in the context of planar geometrically linear elasticity to model a rectangular martensitic nucleus in an austenitic matrix. We derive the scaling regimes for the minimal energy in terms of the problem parameters, which represent the {shape} of the nucleus, the quotient of the elastic moduli of the two phases, the surface energy constant, and the… ▽ More We consider a singularly-perturbed two-well problem in the context of planar geometrically linear elasticity to model a rectangular martensitic nucleus in an austenitic matrix. We derive the scaling regimes for the minimal energy in terms of the problem parameters, which represent the {shape} of the nucleus, the quotient of the elastic moduli of the two phases, the surface energy constant, and the volume fraction of the two martensitic variants. We identify several different scaling regimes, which are distinguished either by the exponents in the parameters, or by logarithmic corrections, for which we have matching upper and lower bounds. △ Less

Submitted 9 March, 2020; originally announced March 2020.

Data-Driven Finite Elasticity

Authors: Sergio Conti, Stefan Müller, Michael Ortiz

Abstract: We extend to finite elasticity the Data-Driven formulation of geometrically linear elasticity presented in Conti, Müller, Ortiz, Arch.\ Ration.\ Mech.\ Anal.\ 229, 79-123, 2018. The main focus of this paper concerns the formulation of a suitable framework in which the Data-Driven problem of finite elasticity is well-posed in the sense of existence of solutions. We confine attention to deformation… ▽ More We extend to finite elasticity the Data-Driven formulation of geometrically linear elasticity presented in Conti, Müller, Ortiz, Arch.\ Ration.\ Mech.\ Anal.\ 229, 79-123, 2018. The main focus of this paper concerns the formulation of a suitable framework in which the Data-Driven problem of finite elasticity is well-posed in the sense of existence of solutions. We confine attention to deformation gradients $F \in L^p(Ω;\mathbb{R}^{n\times n})$ and first Piola-Kirchhoff stresses $P \in L^q(Ω;\mathbb{R}^{n\times n})$, with $(p,q)\in(1,\infty)$ and $1/p+1/q=1$. We assume that the material behavior is described by means of a material data set containing all the states $(F,P)$ that can be attained by the material, and develop germane notions of coercivity and closedness of the material data set. Within this framework, we put forth conditions ensuring the existence of solutions. We exhibit specific examples of two- and three-dimensional material data sets that fit the present setting and are compatible with material frame indifference. △ Less

Submitted 23 January, 2020; v1 submitted 6 December, 2019; originally announced December 2019.

Geometry of martensite needles in shape memory alloys

Authors: Sergio Conti, Martin Lenz, Nora Lüthen, Martin Rumpf, Barbara Zwicknagl

Abstract: We study the geometry of needle-shaped domains in shape-memory alloys. Needle-shaped domains are ubiquitously found in martensites around macroscopic interfaces between regions which are laminated in different directions, or close to macroscopic austenite/twinned-martensite interfaces. Their geometry results from the interplay of the local nonconvexity of the effective energy density with long-ran… ▽ More We study the geometry of needle-shaped domains in shape-memory alloys. Needle-shaped domains are ubiquitously found in martensites around macroscopic interfaces between regions which are laminated in different directions, or close to macroscopic austenite/twinned-martensite interfaces. Their geometry results from the interplay of the local nonconvexity of the effective energy density with long-range (linear) interactions mediated by the elastic strain field, and is up to now poorly understood. We present a two-dimensional shape optimization model based on finite elasticity and discuss its numerical solution. Our results indicate that the tapering profile of the needles can be understood within finite elasticity, but not with linearized elasticity. The resulting tapering and bending reproduce the main features of experimental observations on NiAl. △ Less

Submitted 3 December, 2019; originally announced December 2019.

Comments: 9 pages, 6 figures

MSC Class: 74N15 (Primary) 74P10; 74S05 (Secondary)

Low-voltage 2D materials-based printed field-effect transistors for integrated digital and analog electronics on paper

Authors: Silvia Conti, Lorenzo Pimpolari, Gabriele Calabrese, Robyn Worsley, Subimal Majee, Dmitry K. Polyushkin, Matthias Paur, Simona Pace, Dong Hoon Keum, Filippo Fabbri, Giuseppe Iannaccone, Massimo Macucci, Camilla Coletti, Thomas Mueller, Cinzia Casiraghi, Gianluca Fiori

Abstract: Paper is the ideal substrate for the development of flexible and environmentally sustainable ubiquitous electronic systems, which, combined with two-dimensional materials, could be exploited in many Internet-of-Things applications, ranging from wearable electronics to smart packaging. Here we report high-performance MoS2 field-effect transistors on paper fabricated with a channel-array approach, c… ▽ More Paper is the ideal substrate for the development of flexible and environmentally sustainable ubiquitous electronic systems, which, combined with two-dimensional materials, could be exploited in many Internet-of-Things applications, ranging from wearable electronics to smart packaging. Here we report high-performance MoS2 field-effect transistors on paper fabricated with a channel-array approach, combining the advantages of two large-area techniques: chemical vapor deposition and inkjet-printing.The first allows the pre-deposition of a pattern of MoS2; the second, the printing of dielectric layers, contacts, and connections to complete transistors and circuits fabrication. Average ION/IOFF of 8 x 10^3 (up to 5 x 10^4) and mobility of 5.5 cm2 V-1 s-1 (up to 26 cm2 V-1 s-1) are obtained. Fully functional integrated circuits of digital and analog building blocks, such as logic gates and current mirrors, are demonstrated, highlighting the potential of this approach for ubiquitous electronics on paper. △ Less

Submitted 14 October, 2020; v1 submitted 14 November, 2019; originally announced November 2019.

Three-dimensional electron-hole superfluidity in a superlattice close to room temperature

Authors: M. Van der Donck, S. Conti, A. Perali, A. R. Hamilton, B. Partoens, F. M. Peeters, D. Neilson

Abstract: Although there is strong theoretical and experimental evidence for electron-hole superfluidity in separated sheets of electrons and holes at low $T$, extending superfluidity to high $T$ is limited by strong 2D fluctuations and Kosterlitz-Thouless effects. We show this limitation can be overcome using a superlattice of alternating electron- and hole-doped semiconductor monolayers. The superfluid tr… ▽ More Although there is strong theoretical and experimental evidence for electron-hole superfluidity in separated sheets of electrons and holes at low $T$, extending superfluidity to high $T$ is limited by strong 2D fluctuations and Kosterlitz-Thouless effects. We show this limitation can be overcome using a superlattice of alternating electron- and hole-doped semiconductor monolayers. The superfluid transition in a 3D superlattice is not topological, and for strong electron-hole pair coupling, the transition temperature $T_c$ can be at room temperature. As a quantitative illustration, we show $T_c$ can reach $270$ K for a superfluid in a realistic superlattice of transition metal dichalcogenide monolayers. △ Less

Submitted 4 November, 2019; originally announced November 2019.

Comments: 5 pages, 3 figures, supplementary material (3 pages) includes 1 table and 1 figure

Journal ref: Phys. Rev. B 102, 060503 (2020)

Experimental conditions for observation of electron-hole superfluidity in GaAs heterostructures

Authors: Samira Saberi-Pouya, Sara Conti, Andrea Perali, Andrew F. Croxall, Alexander R. Hamilton, Francois M. Peeters, David Neilson

Abstract: The experimental parameter ranges needed to generate superfluidity in optical and drag experiments in GaAs double quantum wells are determined, using a formalism that includes self-consistent screening of the Coulomb pairing interaction in the presence of the superfluid. The very different electron and hole masses in GaAs make this a particularly interesting system for superfluidity, with exotic s… ▽ More The experimental parameter ranges needed to generate superfluidity in optical and drag experiments in GaAs double quantum wells are determined, using a formalism that includes self-consistent screening of the Coulomb pairing interaction in the presence of the superfluid. The very different electron and hole masses in GaAs make this a particularly interesting system for superfluidity, with exotic superfluid phases predicted in the BCS-BEC crossover regime. We find that the density and temperature ranges for superfluidity cover the range for which optical experiments have observed indications of superfluidity, but that existing drag experiments lie outside the superfluid range. However we also show that for samples with low mobility with no macroscopically connected superfluidity, if the superfluidity survived in randomly distributed localized pockets, standard quantum capacitance measurements could detect these pockets. △ Less

Submitted 2 March, 2020; v1 submitted 15 October, 2019; originally announced October 2019.

Comments: 7 pages, 4 figures

Journal ref: Phys. Rev. B 101, 140501 (2020)

A do**-dependent switch from one- to two-component superfluidity at temperature above 100K in coupled electron-hole Van der Waals heterostructures

Authors: Sara Conti, Matthias Van der Donck, Andrea Perali, Francois M. Peeters, David Neilson

Abstract: The hunt for high temperature superfluidity has received new impetus from the discovery of atomically thin stable materials. Electron-hole superfluidity in coupled MoSe2-WSe2 monolayers is investigated using a mean-field multiband model that includes the band splitting caused by the strong spin-orbit coupling. The splitting leads to a large energy misalignment of the electron and hole bands which… ▽ More The hunt for high temperature superfluidity has received new impetus from the discovery of atomically thin stable materials. Electron-hole superfluidity in coupled MoSe2-WSe2 monolayers is investigated using a mean-field multiband model that includes the band splitting caused by the strong spin-orbit coupling. The splitting leads to a large energy misalignment of the electron and hole bands which can be markedly changed by interchanging the do** of the monolayers. The choice of do** determines if the superfluidity is tuneable from one- to two-components. The electron-hole pairing is strong, with high transition temperatures in excess of 100 K. △ Less

Submitted 26 October, 2019; v1 submitted 8 September, 2019; originally announced September 2019.

Journal ref: Phys. Rev. B 101, 220504 (2020)

Symmetric div-quasiconvexity and the relaxation of static problems

Authors: Sergio Conti, Stefan Müller, Michael Ortiz

Abstract: We consider problems of static equilibrium in which the primary unknown is the stress field and the solutions maximize a complementary energy subject to equilibrium constraints. A necessary and sufficient condition for the sequential lower-semicontinuity of such functionals is symmetric ${\rm div}$-quasiconvexity, a special case of Fonseca and Müller's $A$-quasiconvexity with $A = {\rm div}$ actin… ▽ More We consider problems of static equilibrium in which the primary unknown is the stress field and the solutions maximize a complementary energy subject to equilibrium constraints. A necessary and sufficient condition for the sequential lower-semicontinuity of such functionals is symmetric ${\rm div}$-quasiconvexity, a special case of Fonseca and Müller's $A$-quasiconvexity with $A = {\rm div}$ acting on $R^{n\times n}_{sym}$. We specifically consider the example of the static problem of plastic limit analysis and seek to characterize its relaxation in the non-standard case of a non-convex elastic domain. We show that the symmetric ${\rm div}$-quasiconvex envelope of the elastic domain can be characterized explicitly for isotropic materials whose elastic domain depends on pressure $p$ and Mises effective shear stress $q$. The envelope then follows from a rank-$2$ hull construction in the $(p,q)$-plane. Remarkably, owing to the equilibrium constraint the relaxed elastic domain can still be strongly non-convex, which shows that convexity of the elastic domain is not a requirement for existence in plasticity. △ Less

Submitted 10 July, 2019; originally announced July 2019.

Landau theory of crystal plasticity

Authors: R. Baggio, E. Arbib, P. Biscari, S. Conti, L. Truskinovsky, G. Zanzotto, O. U. Salman

Abstract: We show that nonlinear continuum elasticity can be effective in modeling plastic flows in crystals if it is viewed as Landau theory with an infinite number of equivalent energy wells whose configuration is dictated by the symmetry group GL(3,Z). Quasi-static loading can be then handled by athermal dynamics, while lattice based discretization can play the role of regularization. As a proof of princ… ▽ More We show that nonlinear continuum elasticity can be effective in modeling plastic flows in crystals if it is viewed as Landau theory with an infinite number of equivalent energy wells whose configuration is dictated by the symmetry group GL(3,Z). Quasi-static loading can be then handled by athermal dynamics, while lattice based discretization can play the role of regularization. As a proof of principle, we study in this Letter dislocation nucleation in a homogeneously sheared 2D crystal and show that the global tensorial invariance of the elastic energy foments the development of complexity in the configuration of collectively nucleating defects. A crucial role in this process is played by the unstable higher symmetry crystallographic phases, traditionally thought to be unrelated to plastic flow in lower symmetry lattices. △ Less

Submitted 20 April, 2019; v1 submitted 6 April, 2019; originally announced April 2019.

Journal ref: Phys. Rev. Lett. 123, 205501 (2019)

Multicomponent screening and superfluidity in gapped electron-hole double bilayer graphene with realistic bands

Authors: Sara Conti, Andrea Perali, Francois M. Peeters, David Neilson

Abstract: Superfluidity has recently been reported in double electron-hole bilayer graphene. The multiband nature of the bilayers is important because of the very small band gaps between conduction and valence bands. The long range nature of the superfluid pairing interaction means that screening must be fully taken into account. We have carried out a systematic mean-field investigation that includes (i) co… ▽ More Superfluidity has recently been reported in double electron-hole bilayer graphene. The multiband nature of the bilayers is important because of the very small band gaps between conduction and valence bands. The long range nature of the superfluid pairing interaction means that screening must be fully taken into account. We have carried out a systematic mean-field investigation that includes (i) contributions to screening from both intraband and interband excitations, (ii) the low-energy band structure of bilayer graphene with its small band gap and flattened Mexican hat-like low-energy bands, (iii) the large density of states at the bottom of the bands, (iv) electron-hole pairing in the multibands, and (v) electron-hole pair transfers between the conduction and valence band condensates. We find that the superfluidity strongly modifies the intraband contributions to the screening, but that the interband contributions are unaffected. Unexpectedly, the net effect of the screening is to suppress Josephson-like pair transfers and to confine the superfluid pairing entirely to the conduction band condensate even for very small band gaps, making the system behave similarly to a one-band superfluid. △ Less

Submitted 10 December, 2018; originally announced December 2018.

Comments: 10 pages, 7 figures

Journal ref: Phys. Rev. B 99, 144517 (2019)

A note on the Hausdorff dimension of the singular set of solutions to elasticity type systems

Authors: Sergio Conti, Matteo Focardi, Flaviana Iurlano

Abstract: We prove partial regularity for minimizers to elasticity type energies in the nonlinear framework {with $p$-growth, $p>1$,} in dimension $n\geq 3$. It is an open problem in such a setting either to establish full regularity or to provide counterexamples. In particular, we give an estimate on the Hausdorff dimension of the potential singular set by proving that is strictly less than {… ▽ More We prove partial regularity for minimizers to elasticity type energies in the nonlinear framework {with $p$-growth, $p>1$,} in dimension $n\geq 3$. It is an open problem in such a setting either to establish full regularity or to provide counterexamples. In particular, we give an estimate on the Hausdorff dimension of the potential singular set by proving that is strictly less than {$n-(p^*\wedge 2)$, and actually $n-2$ in the autonomous case} (full regularity is well-known in dimension $2$). The latter result is instrumental to establish existence for the strong formulation of Griffith type models in brittle fracture with nonlinear constitutive relations, accounting for damage and plasticity in space dimensions $2$ and $3$. △ Less

Submitted 26 April, 2018; originally announced April 2018.

Homogenization in magnetic-shape-memory polymer composites

Authors: Sergio Conti, Martin Lenz, Matthäus Pawelczyk, Martin Rumpf

Abstract: Magnetic-shape-memory materials (e.g. specific NiMnGa alloys) react with a large change of shape to the presence of an external magnetic field. As an alternative for the difficult to manifacture single crystal of these alloys we study composite materials in which small magnetic-shape-memory particles are embedded in a polymer matrix. The macroscopic properties of the composite depend strongly on t… ▽ More Magnetic-shape-memory materials (e.g. specific NiMnGa alloys) react with a large change of shape to the presence of an external magnetic field. As an alternative for the difficult to manifacture single crystal of these alloys we study composite materials in which small magnetic-shape-memory particles are embedded in a polymer matrix. The macroscopic properties of the composite depend strongly on the geometry of the microstructure and on the characteristics of the particles and the polymer. We present a variational model based on micromagnetism and elasticity, and derive via homogenization an effective macroscopic model under the assumption that the microstructure is periodic. We then study numerically the resulting cell problem, and discuss the effect of the microstructure on the macroscopic material behavior. Our results may be used to optimize the shape of the particles and the microstructure. △ Less

Submitted 16 November, 2017; originally announced November 2017.

Comments: 17 pages, 4 figures

MSC Class: 74Q05; 74N15; 74F15; 74S15

The Anomalous Yield Behavior of Fused Silica Glass

Authors: W. Schill, S. Heyden, S. Conti, M. Ortiz

Abstract: We develop a critical-state model of fused silica plasticity on the basis of data mined from molecular dynamics (MD) calculations. The MD data is suggestive of an irreversible densification transition in volumetric compression resulting in permanent, or plastic, densification upon unloading. The MD data also reveals an evolution towards a critical state of constant volume under pressure-shear defo… ▽ More We develop a critical-state model of fused silica plasticity on the basis of data mined from molecular dynamics (MD) calculations. The MD data is suggestive of an irreversible densification transition in volumetric compression resulting in permanent, or plastic, densification upon unloading. The MD data also reveals an evolution towards a critical state of constant volume under pressure-shear deformation. The trend towards constant volume is from above, when the glass is overconsolidated, or from below, when it is underconsolidated. We show that these characteristic behaviors are well-captured by a critical state model of plasticity, where the densification law for glass takes the place of the classical consolidation law of granular media and the locus of constant volume states denotes the critical-state line. A salient feature of the critical-state line of fused silica, as identified from the MD data, that renders its yield behavior anomalous is that it is strongly non-convex, owing to the existence of two well-differentiated phases at low and high pressures. We argue that this strong non-convexity of yield explains the patterning that is observed in molecular dynamics calculations of amorphous solids deforming in shear. We employ an explicit and exact rank-2 envelope construction to upscale the microscopic critical-state model to the macroscale. Remarkably, owing to the equilibrium constraint the resulting effective macroscopic behavior is still characterized by a non-convex critical-state line. Despite this lack of convexity, the effective macroscopic model is stable against microstructure formation and defines well-posed boundary-value problems. △ Less

Submitted 26 October, 2017; v1 submitted 13 October, 2017; originally announced October 2017.

Approximation of functions with small jump sets and existence of strong minimizers of Griffith's energy

Authors: Antonin Chambolle, Sergio Conti, Flaviana Iurlano

Abstract: We prove that special functions of bounded deformation with small jump set are close in energy to functions which are smooth in a slightly smaller domain. This permits to generalize the decay estimate by De Giorgi, Carriero, and Leaci to the linearized context in dimension n and to establish the closedness of the jump set for local minimizers of the Griffith energy. We prove that special functions of bounded deformation with small jump set are close in energy to functions which are smooth in a slightly smaller domain. This permits to generalize the decay estimate by De Giorgi, Carriero, and Leaci to the linearized context in dimension n and to establish the closedness of the jump set for local minimizers of the Griffith energy. △ Less

Submitted 24 October, 2017; v1 submitted 5 October, 2017; originally announced October 2017.

Approximation of a Brittle Fracture Energy with a Constraint of Non-Interpenetration

Authors: Antonin Chambolle, Sergio Conti, Gilles Francfort

Abstract: Linear fracture mechanics (or at least the initiation part of that theory) can be framed in a variational context as a minimization problem over a SBD type space. The corresponding functional can in turn be approximated in the sense of $Γ$-convergence by a sequence of functionals involving a phase field as well as the displacement field. We show that a similar approximation persists if additionall… ▽ More Linear fracture mechanics (or at least the initiation part of that theory) can be framed in a variational context as a minimization problem over a SBD type space. The corresponding functional can in turn be approximated in the sense of $Γ$-convergence by a sequence of functionals involving a phase field as well as the displacement field. We show that a similar approximation persists if additionally imposing a non-interpenetration constraint in the minimization, namely that only nonnegative normal jumps should be permissible. 2010 Mathematics subject classification: 26A45 △ Less

Submitted 13 November, 2017; v1 submitted 13 September, 2017; originally announced September 2017.

Data driven problems in elasticity

Authors: Sergio Conti, Stefan Müller, Michael Ortiz

Abstract: We consider a new class of problems in elasticity, referred to as Data-Driven problems, defined on the space of strain-stress field pairs, or phase space. The problem consists of minimizing the distance between a given material data set and the subspace of compatible strain fields and stress fields in equilibrium. We find that the classical solutions are recovered in the case of linear elasticity.… ▽ More We consider a new class of problems in elasticity, referred to as Data-Driven problems, defined on the space of strain-stress field pairs, or phase space. The problem consists of minimizing the distance between a given material data set and the subspace of compatible strain fields and stress fields in equilibrium. We find that the classical solutions are recovered in the case of linear elasticity. We identify conditions for convergence of Data-Driven solutions corresponding to sequences of ap- proximating material data sets. Specialization to constant material data set sequences in turn establishes an appropriate notion of relaxation. We find that relaxation within this Data-Driven framework is fundamentally different from the classical relaxation of energy functions. For instance, we show that in the Data-Driven framework the relaxation of a bistable material leads to material data sets that are not graphs. △ Less

Submitted 16 August, 2017; v1 submitted 9 August, 2017; originally announced August 2017.

Comments: Result now covers the two well problem in full generality. Proof simplified. New Figure 9 illustrates geometry of separation

MSC Class: 49J45; 74N15

Journal ref: Arch. Ration. Mech. Anal. \textbf{229} (2018), 79--123

Multicomponent electron-hole superfluidity and the BCS-BEC crossover in double bilayer graphene

Authors: S. Conti, A. Perali, F. M. Peeters, D. Neilson

Abstract: Superfluidity in coupled electron-hole sheets of bilayer graphene is predicted here to be multicomponent because of the conduction and valence bands. We investigate the superfluid crossover properties as functions of the tunable carrier densities and the tunable energy band gap $E_g$. For small band gaps there is a significant boost in the two superfluid gaps, but the interaction driven excitation… ▽ More Superfluidity in coupled electron-hole sheets of bilayer graphene is predicted here to be multicomponent because of the conduction and valence bands. We investigate the superfluid crossover properties as functions of the tunable carrier densities and the tunable energy band gap $E_g$. For small band gaps there is a significant boost in the two superfluid gaps, but the interaction driven excitations from the valence to the conduction band can weaken the superfluidity, even blocking the system from entering the BEC regime at low densities. At a given larger density, a band gap $E_g\sim 40$-$60$ meV can carry the system into the strong-pairing multiband BCS-BEC crossover regime, the optimal range for realization of high-$T_c$ superfluidity. △ Less

Submitted 22 June, 2017; originally announced June 2017.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. Lett. 119, 257002 (2017)

Approximation of fracture energies with $p$-growth via piecewise affine finite elements

Authors: Sergio Conti, Matteo Focardi, Flaviana Iurlano

Abstract: The modeling of fracture problems within geometrically linear elasticity is often based on the space of generalized functions of bounded deformation $GSBD^p(Ω)$, $p\in(1,\infty)$, their treatment is however hindered by the very low regularity of those functions and by the lack of appropriate density results. We construct here an approximation of $GSBD^p$ functions, for $p\in(1,\infty)$, with funct… ▽ More The modeling of fracture problems within geometrically linear elasticity is often based on the space of generalized functions of bounded deformation $GSBD^p(Ω)$, $p\in(1,\infty)$, their treatment is however hindered by the very low regularity of those functions and by the lack of appropriate density results. We construct here an approximation of $GSBD^p$ functions, for $p\in(1,\infty)$, with functions which are Lipschitz continuous away from a jump set which is a finite union of closed subsets of $C^1$ hypersurfaces. The strains of the approximating functions converge strongly in $L^p$ to the strain of the target, and the area of their jump sets converge to the area of the target. The key idea is to use piecewise affine functions on a suitable grid, which is obtained via the Freudhental partition of a cubic grid. △ Less

Submitted 28 January, 2018; v1 submitted 6 June, 2017; originally announced June 2017.

Journal ref: ESAIM: COCV \textbf{25} (2019), 34

A branched transport limit of the Ginzburg-Landau functional

Authors: Sergio Conti, Michael Goldman, Felix Otto, Sylvia Serfaty

Abstract: We study the Ginzburg-Landau model of type-I superconductors in the regime of small external magnetic fields. We show that, in an appropriate asymptotic regime, flux patterns are described by a simplified branched transportation functional. We derive the simplified functional from the full Ginzburg-Landau model rigorously via $Γ$-convergence. The detailed analysis of the limiting procedure and the… ▽ More We study the Ginzburg-Landau model of type-I superconductors in the regime of small external magnetic fields. We show that, in an appropriate asymptotic regime, flux patterns are described by a simplified branched transportation functional. We derive the simplified functional from the full Ginzburg-Landau model rigorously via $Γ$-convergence. The detailed analysis of the limiting procedure and the study of the limiting functional lead to a precise understanding of the multiple scales contained in the model. △ Less

Submitted 20 March, 2018; v1 submitted 10 April, 2017; originally announced April 2017.

Value of Information: Sensitivity Analysis and Research Design in Bayesian Evidence Synthesis

Authors: Christopher Jackson, Anne Presanis, Stefano Conti, Daniela De Angelis

Abstract: Suppose we have a Bayesian model which combines evidence from several different sources. We want to know which model parameters most affect the estimate or decision from the model, or which of the parameter uncertainties drive the decision uncertainty. Furthermore we want to prioritise what further data should be collected. These questions can be addressed by Value of Information (VoI) analysis, i… ▽ More Suppose we have a Bayesian model which combines evidence from several different sources. We want to know which model parameters most affect the estimate or decision from the model, or which of the parameter uncertainties drive the decision uncertainty. Furthermore we want to prioritise what further data should be collected. These questions can be addressed by Value of Information (VoI) analysis, in which we estimate expected reductions in loss from learning specific parameters or collecting data of a given design. We describe the theory and practice of VoI for Bayesian evidence synthesis, using and extending ideas from health economics, computer modelling and Bayesian design. The methods are general to a range of decision problems including point estimation and choices between discrete actions. We apply them to a model for estimating prevalence of HIV infection, combining indirect information from several surveys, registers and expert beliefs. This analysis shows which parameters contribute most of the uncertainty about each prevalence estimate, and provides the expected improvements in precision from collecting specific amounts of additional data. △ Less

Submitted 27 March, 2017; originally announced March 2017.

Journal ref: Journal of the American Statistical Association (2019)

Existence of strong minimizers for the Griffith static fracture model in dimension two

Authors: Sergio Conti, Matteo Focardi, Flaviana Iurlano

Abstract: We consider the Griffith fracture model in two spatial dimensions, and prove existence of strong minimizers, with closed jump set and continuously differentiable deformation fields. One key ingredient, which is the object of the present paper, is a generalization of the decay estimate by De Giorgi, Carriero, and Leaci to the vectorial situation. This is based on replacing the coarea formula by a m… ▽ More We consider the Griffith fracture model in two spatial dimensions, and prove existence of strong minimizers, with closed jump set and continuously differentiable deformation fields. One key ingredient, which is the object of the present paper, is a generalization of the decay estimate by De Giorgi, Carriero, and Leaci to the vectorial situation. This is based on replacing the coarea formula by a method to approximate $SBD^p$ functions with small jump set by Sobolev functions and is restricted to two dimensions. The other two ingredients are contained in companion papers and consist respectively in regularity results for vectorial elliptic problems of the elasticity type and in a method to approximate in energy $GSBD^p$ functions by $SBV^p$ ones. △ Less

Submitted 21 June, 2017; v1 submitted 10 November, 2016; originally announced November 2016.

Stochastic Dominance Constraints in Elastic Shape Optimization

Authors: Sergio Conti, Martin Rumpf, Rüdiger Schultz, Sascha Tölkes

Abstract: This paper deals with shape optimization for elastic materials under stochastic loads. It transfers the paradigm of stochastic dominance, which allows for flexible risk aversion via comparison with benchmark random variables, from finite-dimensional stochastic programming to shape optimization. Rather than handling risk aversion in the objective, this enables risk aversion by including dominance c… ▽ More This paper deals with shape optimization for elastic materials under stochastic loads. It transfers the paradigm of stochastic dominance, which allows for flexible risk aversion via comparison with benchmark random variables, from finite-dimensional stochastic programming to shape optimization. Rather than handling risk aversion in the objective, this enables risk aversion by including dominance constraints that single out subsets of nonanticipative shapes which compare favorably to a chosen stochastic benchmark. This new class of stochastic shape optimization problems arises by optimizing over such feasible sets. The analytical description is built on risk-averse cost measures. The underlying cost functional is of compliance type plus a perimeter term, in the implementation shapes are represented by a phase field which permits an easy estimate of a regularized perimeter. The analytical description and the numerical implementation of dominance constraints are built on risk-averse measures for the cost functional. A suitable numerical discretization is obtained using finite elements both for the displacement and the phase field function. Different numerical experiments demonstrate the potential of the proposed stochastic shape optimization model and in particular the impact of high variability of forces or probabilities in the different realizations. △ Less

Submitted 30 June, 2016; originally announced June 2016.

Comments: 13 pages, 4 figures

MSC Class: 35Q93; 49Q10; 65N30