Showing 1–22 of 22 results for author: Smith, K N

Pauli Check Extrapolation for Quantum Error Mitigation

Authors: Quinn Langfitt, Ji Liu, Benchen Huang, Alvin Gonzales, Kaitlin N. Smith, Nikos Hardavellas, Zain H. Saleem

Abstract: Pauli Check Sandwiching (PCS) is an error mitigation scheme that uses pairs of parity checks to detect errors in the payload circuit. While increasing the number of check pairs improves error detection, it also introduces additional noise to the circuit and exponentially increases the required sampling size. To address these limitations, we propose a novel error mitigation scheme, Pauli Check Extr… ▽ More Pauli Check Sandwiching (PCS) is an error mitigation scheme that uses pairs of parity checks to detect errors in the payload circuit. While increasing the number of check pairs improves error detection, it also introduces additional noise to the circuit and exponentially increases the required sampling size. To address these limitations, we propose a novel error mitigation scheme, Pauli Check Extrapolation (PCE), which integrates PCS with an extrapolation technique similar to Zero-Noise Extrapolation (ZNE). However, instead of extrapolating to the `zero-noise' limit, as is done in ZNE, PCE extrapolates to the `maximum check' limit--the number of check pairs theoretically required to achieve unit fidelity. In this study, we focus on applying a linear model for extrapolation and also derive a more general exponential ansatz based on the Markovian error model. We demonstrate the effectiveness of PCE by using it to mitigate errors in the shadow estimation protocol, particularly for states prepared by the variational quantum eigensolver (VQE). Our results show that this method can achieve higher fidelities than the state-of-the-art Robust Shadow (RS) estimation scheme, while significantly reducing the number of required samples by eliminating the need for a calibration procedure. We validate these findings on both fully-connected topologies and simulated IBM hardware backends. △ Less

Submitted 20 June, 2024; originally announced June 2024.

Average circuit eigenvalue sampling on NISQ devices

Authors: Emilio Pelaez, Victory Omole, Pranav Gokhale, Rich Rines, Kaitlin N. Smith, Michael A. Perlin, Akel Hashim

Abstract: Average circuit eigenvalue sampling (ACES) was introduced by Flammia in arXiv:2108.05803 as a protocol to characterize the Pauli error channels of individual gates across the device simultaneously. The original paper posed using ACES to characterize near-term devices as an open problem. This work advances in this direction by presenting a full implementation of ACES for real devices and deploying… ▽ More Average circuit eigenvalue sampling (ACES) was introduced by Flammia in arXiv:2108.05803 as a protocol to characterize the Pauli error channels of individual gates across the device simultaneously. The original paper posed using ACES to characterize near-term devices as an open problem. This work advances in this direction by presenting a full implementation of ACES for real devices and deploying it to Superstaq arXiv:2309.05157, along with a device-tailored resource estimation obtained through simulations and experiments. Our simulations show that ACES is able to estimate one- and two-qubit non-uniform Pauli error channels to an average eigenvalue absolute error of under $0.003$ and total variation distance of under 0.001 between simulated and reconstructed probability distributions over Pauli errors with $10^5$ shots per circuit using 5 circuits of depth 14. The question of estimating general error channels through twirling techniques in real devices remains open, as it is dependent on a device's native gates, but simulations with the Clifford set show results in agreement with reported hardware data. Experimental results on IBM's Algiers and Osaka devices are presented, where we characterize their error channels as Pauli channels without twirling. △ Less

Submitted 20 March, 2024; v1 submitted 19 March, 2024; originally announced March 2024.

Comments: 7 pages, 6 figures

5 Year Update to the Next Steps in Quantum Computing

Authors: Kenneth Brown, Fred Chong, Kaitlin N. Smith, Tom Conte, Austin Adams, Aniket Dalvi, Christopher Kang, Josh Viszlai

Abstract: It has been 5 years since the Computing Community Consortium (CCC) Workshop on Next Steps in Quantum Computing, and significant progress has been made in closing the gap between useful quantum algorithms and quantum hardware. Yet much remains to be done, in particular in terms of mitigating errors and moving towards error-corrected machines. As we begin to transition from the Noisy-Intermediate Sc… ▽ More It has been 5 years since the Computing Community Consortium (CCC) Workshop on Next Steps in Quantum Computing, and significant progress has been made in closing the gap between useful quantum algorithms and quantum hardware. Yet much remains to be done, in particular in terms of mitigating errors and moving towards error-corrected machines. As we begin to transition from the Noisy-Intermediate Scale Quantum (NISQ) era to a future of fault-tolerant machines, now is an opportune time to reflect on how to apply what we have learned thus far and what research needs to be done to realize computational advantage with quantum machines. △ Less

Submitted 26 January, 2024; originally announced March 2024.

Trustworthy Quantum Computation through Quantum Physical Unclonable Functions

Authors: Kaitlin N. Smith, Pranav Gokhale

Abstract: Quantum computing is under rapid development, and today there are several cloud-based, quantum computers (QCs) of modest size (>100s of physical qubits). Although these QCs, along with their highly-specialized classical support infrastructure, are in limited supply, they are readily available for remote access and programming. This work shows the viability of using intrinsic quantum hardware prope… ▽ More Quantum computing is under rapid development, and today there are several cloud-based, quantum computers (QCs) of modest size (>100s of physical qubits). Although these QCs, along with their highly-specialized classical support infrastructure, are in limited supply, they are readily available for remote access and programming. This work shows the viability of using intrinsic quantum hardware properties for fingerprinting cloud-based QCs that exist today. We demonstrate the reliability of intrinsic fingerprinting with real QC characterization data, as well as simulated QC data, and we detail a quantum physically unclonable function (Q-PUF) scheme for secure key generation using unique fingerprint data combined with fuzzy extraction. We use fixed-frequency transmon qubits for prototy** our methods. △ Less

Submitted 13 November, 2023; originally announced November 2023.

Superstaq: Deep Optimization of Quantum Programs

Authors: Colin Campbell, Frederic T. Chong, Denny Dahl, Paige Frederick, Palash Goiporia, Pranav Gokhale, Benjamin Hall, Salahedeen Issa, Eric Jones, Stephanie Lee, Andrew Litteken, Victory Omole, David Owusu-Antwi, Michael A. Perlin, Rich Rines, Kaitlin N. Smith, Noah Goss, Akel Hashim, Ravi Naik, Ed Younis, Daniel Lobser, Christopher G. Yale, Benchen Huang, Ji Liu

Abstract: We describe Superstaq, a quantum software platform that optimizes the execution of quantum programs by tailoring to underlying hardware primitives. For benchmarks such as the Bernstein-Vazirani algorithm and the Qubit Coupled Cluster chemistry method, we find that deep optimization can improve program execution performance by at least 10x compared to prevailing state-of-the-art compilers. To highl… ▽ More We describe Superstaq, a quantum software platform that optimizes the execution of quantum programs by tailoring to underlying hardware primitives. For benchmarks such as the Bernstein-Vazirani algorithm and the Qubit Coupled Cluster chemistry method, we find that deep optimization can improve program execution performance by at least 10x compared to prevailing state-of-the-art compilers. To highlight the versatility of our approach, we present results from several hardware platforms: superconducting qubits (AQT @ LBNL, IBM Quantum, Rigetti), trapped ions (QSCOUT), and neutral atoms (Infleqtion). Across all platforms, we demonstrate new levels of performance and new capabilities that are enabled by deeper integration between quantum programs and the device physics of hardware. △ Less

Submitted 10 September, 2023; originally announced September 2023.

Comments: Appearing in IEEE QCE 2023 (Quantum Week) conference

VarSaw: Application-tailored Measurement Error Mitigation for Variational Quantum Algorithms

Authors: Siddharth Dangwal, Gokul Subramanian Ravi, Poulami Das, Kaitlin N. Smith, Jonathan M. Baker, Frederic T. Chong

Abstract: For potential quantum advantage, Variational Quantum Algorithms (VQAs) need high accuracy beyond the capability of today's NISQ devices, and thus will benefit from error mitigation. In this work we are interested in mitigating measurement errors which occur during qubit measurements after circuit execution and tend to be the most error-prone operations, especially detrimental to VQAs. Prior work,… ▽ More For potential quantum advantage, Variational Quantum Algorithms (VQAs) need high accuracy beyond the capability of today's NISQ devices, and thus will benefit from error mitigation. In this work we are interested in mitigating measurement errors which occur during qubit measurements after circuit execution and tend to be the most error-prone operations, especially detrimental to VQAs. Prior work, JigSaw, has shown that measuring only small subsets of circuit qubits at a time and collecting results across all such subset circuits can reduce measurement errors. Then, running the entire (global) original circuit and extracting the qubit-qubit measurement correlations can be used in conjunction with the subsets to construct a high-fidelity output distribution of the original circuit. Unfortunately, the execution cost of JigSaw scales polynomially in the number of qubits in the circuit, and when compounded by the number of circuits and iterations in VQAs, the resulting execution cost quickly turns insurmountable. To combat this, we propose VarSaw, which improves JigSaw in an application-tailored manner, by identifying considerable redundancy in the JigSaw approach for VQAs: spatial redundancy across subsets from different VQA circuits and temporal redundancy across globals from different VQA iterations. VarSaw then eliminates these forms of redundancy by commuting the subset circuits and selectively executing the global circuits, reducing computational cost (in terms of the number of circuits executed) over naive JigSaw for VQA by 25x on average and up to 1000x, for the same VQA accuracy. Further, it can recover, on average, 45% of the infidelity from measurement errors in the noisy VQA baseline. Finally, it improves fidelity by 55%, on average, over JigSaw for a fixed computational budget. VarSaw can be accessed here: https://github.com/siddharthdangwal/VarSaw. △ Less

Submitted 29 February, 2024; v1 submitted 9 June, 2023; originally announced June 2023.

Comments: Appears at the International Conference on Architectural Support for Programming Languages and Operating Systems (ASPLOS) 2024. First two authors contributed equally

Codesign of quantum error-correcting codes and modular chiplets in the presence of defects

Authors: Sophia Fuhui Lin, Joshua Viszlai, Kaitlin N. Smith, Gokul Subramanian Ravi, Charles Yuan, Frederic T. Chong, Benjamin J. Brown

Abstract: Fabrication errors pose a significant challenge in scaling up solid-state quantum devices to the sizes required for fault-tolerant (FT) quantum applications. To mitigate the resource overhead caused by fabrication errors, we combine two approaches: (1) leveraging the flexibility of a modular architecture, (2) adapting the procedure of quantum error correction (QEC) to account for fabrication defec… ▽ More Fabrication errors pose a significant challenge in scaling up solid-state quantum devices to the sizes required for fault-tolerant (FT) quantum applications. To mitigate the resource overhead caused by fabrication errors, we combine two approaches: (1) leveraging the flexibility of a modular architecture, (2) adapting the procedure of quantum error correction (QEC) to account for fabrication defects. We simulate the surface code adapted to qubit arrays with arbitrarily distributed defects to find metrics that characterize how defects affect fidelity. We then determine the impact of defects on the resource overhead of realizing a fault-tolerant quantum computer, on a chiplet-based modular architecture. Our strategy for dealing with fabrication defects demonstrates an exponential suppression of logical failure where error rates of non-faulty physical qubits are ~0.1% in a circuit-based noise model. This is a typical regime where we imagine running the defect-free surface code. We use our numerical results to establish post-selection criteria for building a device from defective chiplets. Using our criteria, we then evaluate the resource overhead in terms of the average number of fabricated physical qubits per logical qubit. We find that an optimal choice of chiplet size, based on the defect rate and target fidelity, is essential to limiting any additional error correction overhead due to defects. When the optimal chiplet size is chosen, at a defect rate of 1% the resource overhead can be reduced to below 3X and 6X respectively for the two defect models we use, for a wide range of target performance. We also determine cutoff fidelity values that help identify whether a qubit should be disabled or kept as part of the error correction code. △ Less

Submitted 22 March, 2024; v1 submitted 28 April, 2023; originally announced May 2023.

Comments: In ASPLOS 2024: the 29th ACM International Conference on Architectural Support for Programming Languages and Operating Systems

Clifford-based Circuit Cutting for Quantum Simulation

Authors: Kaitlin N. Smith, Michael A. Perlin, Pranav Gokhale, Paige Frederick, David Owusu-Antwi, Richard Rines, Victory Omole, Frederic T. Chong

Abstract: Quantum computing has potential to provide exponential speedups over classical computing for many important applications. However, today's quantum computers are in their early stages, and hardware quality issues hinder the scale of program execution. Benchmarking and simulation of quantum circuits on classical computers is therefore essential to advance the understanding of how quantum computers a… ▽ More Quantum computing has potential to provide exponential speedups over classical computing for many important applications. However, today's quantum computers are in their early stages, and hardware quality issues hinder the scale of program execution. Benchmarking and simulation of quantum circuits on classical computers is therefore essential to advance the understanding of how quantum computers and programs operate, enabling both algorithm discovery that leads to high-impact quantum computation and engineering improvements that deliver to more powerful quantum systems. Unfortunately, the nature of quantum information causes simulation complexity to scale exponentially with problem size. In this paper, we debut Super.tech's SuperSim framework, a new approach for high fidelity and scalable quantum circuit simulation. SuperSim employs two key techniques for accelerated quantum circuit simulation: Clifford-based simulation and circuit cutting. Through the isolation of Clifford subcircuit fragments within a larger non-Clifford circuit, resource-efficient Clifford simulation can be invoked, leading to significant reductions in runtime. After fragments are independently executed, circuit cutting and recombination procedures allow the final output of the original circuit to be reconstructed from fragment execution results. Through the combination of these two state-of-art techniques, SuperSim is a product for quantum practitioners that allows quantum circuit evaluation to scale beyond the frontiers of current simulators. Our results show that Clifford-based circuit cutting accelerates the simulation of near-Clifford circuits, allowing 100s of qubits to be evaluated with modest runtimes. △ Less

Submitted 19 March, 2023; originally announced March 2023.

Comments: To appear at the 50th International Symposium on Computer Architecture (ISCA 2023)

SupercheQ: Quantum Advantage for Distributed Databases

Authors: P. Gokhale, E. R. Anschuetz, C. Campbell, F. T. Chong, E. D. Dahl, P. Frederick, E. B. Jones, B. Hall, S. Issa, P. Goiporia, S. Lee, P. Noell, V. Omole, D. Owusu-Antwi, M. A. Perlin, R. Rines, M. Saffman, K. N. Smith, T. Tomesh

Abstract: We introduce SupercheQ, a family of quantum protocols that achieves asymptotic advantage over classical protocols for checking the equivalence of files, a task also known as fingerprinting. The first variant, SupercheQ-EE (Efficient Encoding), uses n qubits to verify files with 2^O(n) bits -- an exponential advantage in communication complexity (i.e. bandwidth, often the limiting factor in network… ▽ More We introduce SupercheQ, a family of quantum protocols that achieves asymptotic advantage over classical protocols for checking the equivalence of files, a task also known as fingerprinting. The first variant, SupercheQ-EE (Efficient Encoding), uses n qubits to verify files with 2^O(n) bits -- an exponential advantage in communication complexity (i.e. bandwidth, often the limiting factor in networked applications) over the best possible classical protocol in the simultaneous message passing setting. Moreover, SupercheQ-EE can be gracefully scaled down for implementation on circuits with poly(n^l) depth to enable verification for files with O(n^l) bits for arbitrary constant l. The quantum advantage is achieved by random circuit sampling, thereby endowing circuits from recent quantum supremacy and quantum volume experiments with a practical application. We validate SupercheQ-EE's performance at scale through GPU simulation. The second variant, SupercheQ-IE (Incremental Encoding), uses n qubits to verify files with O(n^2) bits while supporting constant-time incremental updates to the fingerprint. Moreover, SupercheQ-IE only requires Clifford gates, ensuring relatively modest overheads for error-corrected implementation. We experimentally demonstrate proof-of-concepts through Qiskit Runtime on IBM quantum hardware. We envision SupercheQ could be deployed in distributed data settings, accompanying replicas of important databases. △ Less

Submitted 7 December, 2022; originally announced December 2022.

Fast Fingerprinting of Cloud-based NISQ Quantum Computers

Authors: Kaitlin N. Smith, Joshua Viszlai, Lennart Maximilian Seifert, Jonathan M. Baker, Jakub Szefer, Frederic T. Chong

Abstract: Cloud-based quantum computers have become a reality with a number of companies allowing for cloud-based access to their machines with tens to more than 100 qubits. With easy access to quantum computers, quantum information processing will potentially revolutionize computation, and superconducting transmon-based quantum computers are among some of the more promising devices available. Cloud service… ▽ More Cloud-based quantum computers have become a reality with a number of companies allowing for cloud-based access to their machines with tens to more than 100 qubits. With easy access to quantum computers, quantum information processing will potentially revolutionize computation, and superconducting transmon-based quantum computers are among some of the more promising devices available. Cloud service providers today host a variety of these and other prototype quantum computers with highly diverse device properties, sizes, and performances. The variation that exists in today's quantum computers, even among those of the same underlying hardware, motivate the study of how one device can be clearly differentiated and identified from the next. As a case study, this work focuses on the properties of 25 IBM superconducting, fixed-frequency transmon-based quantum computers that range in age from a few months to approximately 2.5 years. Through the analysis of current and historical quantum computer calibration data, this work uncovers key features within the machines that can serve as basis for unique hardware fingerprint of each quantum computer. This work demonstrates a new and fast method to reliably fingerprint cloud-based quantum computers based on unique frequency characteristics of transmon qubits. Both enrollment and recall operations are very fast as fingerprint data can be generated with minimal executions on the quantum machine. The qubit frequency-based fingerprints also have excellent inter-device separation and intra-device stability. △ Less

Submitted 14 November, 2022; originally announced November 2022.

Scaling Superconducting Quantum Computers with Chiplet Architectures

Authors: Kaitlin N. Smith, Gokul Subramanian Ravi, Jonathan M. Baker, Frederic T. Chong

Abstract: Fixed-frequency transmon quantum computers (QCs) have advanced in coherence times, addressability, and gate fidelities. Unfortunately, these devices are restricted by the number of on-chip qubits, cap** processing power and slowing progress toward fault-tolerance. Although emerging transmon devices feature over 100 qubits, building QCs large enough for meaningful demonstrations of quantum advant… ▽ More Fixed-frequency transmon quantum computers (QCs) have advanced in coherence times, addressability, and gate fidelities. Unfortunately, these devices are restricted by the number of on-chip qubits, cap** processing power and slowing progress toward fault-tolerance. Although emerging transmon devices feature over 100 qubits, building QCs large enough for meaningful demonstrations of quantum advantage requires overcoming many design challenges. For example, today's transmon qubits suffer from significant variation due to limited precision in fabrication. As a result, barring significant improvements in current fabrication techniques, scaling QCs by building ever larger individual chips with more qubits is hampered by device variation. Severe device variation that degrades QC performance is referred to as a defect. Here, we focus on a specific defect known as a frequency collision. When transmon frequencies collide, their difference falls within a range that limits two-qubit gate fidelity. Frequency collisions occur with greater probability on larger QCs, causing collision-free yields to decline as the number of on-chip qubits increases. As a solution, we propose exploiting the higher yields associated with smaller QCs by integrating quantum chiplets within quantum multi-chip modules (MCMs). Yield, gate performance, and application-based analysis show the feasibility of QC scaling through modularity. △ Less

Submitted 19 October, 2022; originally announced October 2022.

Comments: Appeared in the 55th IEEE/ACM International Symposium on Microarchitecture (MICRO), 2022

Boosting Quantum Fidelity with an Ordered Diverse Ensemble of Clifford Canary Circuits

Authors: Gokul Subramanian Ravi, Jonathan M. Baker, Kaitlin N. Smith, Nathan Earnest, Ali Javadi-Abhari, Frederic Chong

Abstract: On today's noisy imperfect quantum devices, execution fidelity tends to collapse dramatically for most applications beyond a handful of qubits. It is therefore imperative to employ novel techniques that can boost quantum fidelity in new ways. This paper aims to boost quantum fidelity with Clifford canary circuits by proposing Quancorde: Quantum Canary Ordered Diverse Ensembles, a fundamentally n… ▽ More On today's noisy imperfect quantum devices, execution fidelity tends to collapse dramatically for most applications beyond a handful of qubits. It is therefore imperative to employ novel techniques that can boost quantum fidelity in new ways. This paper aims to boost quantum fidelity with Clifford canary circuits by proposing Quancorde: Quantum Canary Ordered Diverse Ensembles, a fundamentally new approach to identifying the correct outcomes of extremely low-fidelity quantum applications. It is based on the key idea of diversity in quantum devices - variations in noise sources, make each (portion of a) device unique, and therefore, their impact on an application's fidelity, also unique. Quancorde utilizes Clifford canary circuits (which are classically simulable, but also resemble the target application structure and thus suffer similar structural noise impact) to order a diverse ensemble of devices or qubits/map**s approximately along the direction of increasing fidelity of the target application. Quancorde then estimates the correlation of the ensemble-wide probabilities of each output string of the application, with the canary ensemble ordering, and uses this correlation to weight the application's noisy probability distribution. The correct application outcomes are expected to have higher correlation with the canary ensemble order, and thus their probabilities are boosted in this process. Doing so, Quancorde improves the fidelity of evaluated quantum applications by a mean of 8.9x/4.2x (wrt. different baselines) and up to a maximum of 34x. △ Less

Submitted 27 September, 2022; originally announced September 2022.

Navigating the dynamic noise landscape of variational quantum algorithms with QISMET

Authors: Gokul Subramanian Ravi, Kaitlin N. Smith, Jonathan M. Baker, Tejas Kannan, Nathan Earnest, Ali Javadi-Abhari, Henry Hoffmann, Frederic T. Chong

Abstract: Transient errors from the dynamic NISQ noise landscape are challenging to comprehend and are especially detrimental to classes of applications that are iterative and/or long-running, and therefore their timely mitigation is important for quantum advantage in real-world applications. The most popular examples of iterative long-running quantum applications are variational quantum algorithms (VQAs).… ▽ More Transient errors from the dynamic NISQ noise landscape are challenging to comprehend and are especially detrimental to classes of applications that are iterative and/or long-running, and therefore their timely mitigation is important for quantum advantage in real-world applications. The most popular examples of iterative long-running quantum applications are variational quantum algorithms (VQAs). Iteratively, VQA's classical optimizer evaluates circuit candidates on an objective function and picks the best circuits towards achieving the application's target. Noise fluctuation can cause a significant transient impact on the objective function estimation of the VQA iterations / tuning candidates. This can severely affect VQA tuning and, by extension, its accuracy and convergence. This paper proposes QISMET: Quantum Iteration Skip** to Mitigate Error Transients, to navigate the dynamic noise landscape of VQAs. QISMET actively avoids instances of high fluctuating noise which are predicted to have a significant transient error impact on specific VQA iterations. To achieve this, QISMET estimates transient error in VQA iterations and designs a controller to keep the VQA tuning faithful to the transient-free scenario. By doing so, QISMET efficiently mitigates a large portion of the transient noise impact on VQAs and is able to improve the fidelity by 1.3x-3x over a traditional VQA baseline, with 1.6-2.4x improvement over alternative approaches, across different applications and machines. Further, to diligently analyze the effects of transients, this work also builds transient noise models for target VQA applications from observing real machine transients. These are then integrated with the Qiskit simulator. △ Less

Submitted 29 September, 2023; v1 submitted 25 September, 2022; originally announced September 2022.

Comments: Appears at the 28th Conference on Architectural Support for Programming Languages and Operating Systems (ASPLOS 2023)

Quantum Vulnerability Analysis to Accurate Estimate the Quantum Algorithm Success Rate

Authors: Fang Qi, Kaitlin N. Smith, Travis LeCompte, Nianfeng Tzeng, Xu Yuan, Frederic T. Chong, Lu Peng

Abstract: While quantum computers provide exciting opportunities for information processing, they currently suffer from noise during computation that is not fully understood. Incomplete noise models have led to discrepancies between quantum program success rate (SR) estimates and actual machine outcomes. For example, the estimated probability of success (ESP) is the state-of-the-art metric used to gauge qua… ▽ More While quantum computers provide exciting opportunities for information processing, they currently suffer from noise during computation that is not fully understood. Incomplete noise models have led to discrepancies between quantum program success rate (SR) estimates and actual machine outcomes. For example, the estimated probability of success (ESP) is the state-of-the-art metric used to gauge quantum program performance. The ESP suffers poor prediction since it fails to account for the unique combination of circuit structure, quantum state, and quantum computer properties specific to each program execution. Thus, an urgent need exists for a systematic approach that can elucidate various noise impacts and accurately and robustly predict quantum computer success rates, emphasizing application and device scaling. In this article, we propose quantum vulnerability analysis (QVA) to systematically quantify the error impact on quantum applications and address the gap between current success rate (SR) estimators and real quantum computer results. The QVA determines the cumulative quantum vulnerability (CQV) of the target quantum computation, which quantifies the quantum error impact based on the entire algorithm applied to the target quantum machine. By evaluating the CQV with well-known benchmarks on three 27-qubit quantum computers, the CQV success estimation outperforms the estimated probability of success state-of-the-art prediction technique by achieving on average six times less relative prediction error, with best cases at 30 times, for benchmarks with a real SR rate above 0.1%. Direct application of QVA has been provided that helps researchers choose a promising compiling strategy at compile time. △ Less

Submitted 26 March, 2024; v1 submitted 28 July, 2022; originally announced July 2022.

Comments: 11pages, 11 figures

Journal ref: IEEE Transactions on Quantum Engineering (2023)

Adaptive job and resource management for the growing quantum cloud

Authors: Gokul Subramanian Ravi, Kaitlin N. Smith, Prakash Murali, Frederic T. Chong

Abstract: As the popularity of quantum computing continues to grow, efficient quantum machine access over the cloud is critical to both academic and industry researchers across the globe. And as cloud quantum computing demands increase exponentially, the analysis of resource consumption and execution characteristics are key to efficient management of jobs and resources at both the vendor-end as well as the… ▽ More As the popularity of quantum computing continues to grow, efficient quantum machine access over the cloud is critical to both academic and industry researchers across the globe. And as cloud quantum computing demands increase exponentially, the analysis of resource consumption and execution characteristics are key to efficient management of jobs and resources at both the vendor-end as well as the client-end. While the analysis and optimization of job / resource consumption and management are popular in the classical HPC domain, it is severely lacking for more nascent technology like quantum computing. This paper proposes optimized adaptive job scheduling to the quantum cloud taking note of primary characteristics such as queuing times and fidelity trends across machines, as well as other characteristics such as quality of service guarantees and machine calibration constraints. Key components of the proposal include a) a prediction model which predicts fidelity trends across machine based on compiled circuit features such as circuit depth and different forms of errors, as well as b) queuing time prediction for each machine based on execution time estimations. Overall, this proposal is evaluated on simulated IBM machines across a diverse set of quantum applications and system loading scenarios, and is able to reduce wait times by over 3x and improve fidelity by over 40\% on specific usecases, when compared to traditional job schedulers. △ Less

Submitted 24 March, 2022; originally announced March 2022.

Comments: Appeared at the 2021 IEEE International Conference on Quantum Computing and Engineering. arXiv admin note: text overlap with arXiv:2203.13121. substantial text overlap with arXiv:2203.13121

Quantum Computing in the Cloud: Analyzing job and machine characteristics

Authors: Gokul Subramanian Ravi, Kaitlin N. Smith, Pranav Gokhale, Frederic T. Chong

Abstract: As the popularity of quantum computing continues to grow, quantum machine access over the cloud is critical to both academic and industry researchers across the globe. And as cloud quantum computing demands increase exponentially, the analysis of resource consumption and execution characteristics are key to efficient management of jobs and resources at both the vendor-end as well as the client-end… ▽ More As the popularity of quantum computing continues to grow, quantum machine access over the cloud is critical to both academic and industry researchers across the globe. And as cloud quantum computing demands increase exponentially, the analysis of resource consumption and execution characteristics are key to efficient management of jobs and resources at both the vendor-end as well as the client-end. While the analysis of resource consumption and management are popular in the classical HPC domain, it is severely lacking for more nascent technology like quantum computing. This paper is a first-of-its-kind academic study, analyzing various trends in job execution and resources consumption / utilization on quantum cloud systems. We focus on IBM Quantum systems and analyze characteristics over a two year period, encompassing over 6000 jobs which contain over 600,000 quantum circuit executions and correspond to almost 10 billion "shots" or trials over 20+ quantum machines. Specifically, we analyze trends focused on, but not limited to, execution times on quantum machines, queuing/waiting times in the cloud, circuit compilation times, machine utilization, as well as the impact of job and machine characteristics on all of these trends. Our analysis identifies several similarities and differences with classical HPC cloud systems. Based on our insights, we make recommendations and contributions to improve the management of resources and jobs on future quantum cloud systems. △ Less

Submitted 24 March, 2022; originally announced March 2022.

Comments: Appeared at the 2021 IEEE International Symposium on Workload Characterization

Summary: Chicago Quantum Exchange (CQE) Pulse-level Quantum Control Workshop

Authors: Kaitlin N. Smith, Gokul Subramanian Ravi, Thomas Alexander, Nicholas T. Bronn, Andre Carvalho, Alba Cervera-Lierta, Frederic T. Chong, Jerry M. Chow, Michael Cubeddu, Akel Hashim, Liang Jiang, Olivia Lanes, Matthew J. Otten, David I. Schuster, Pranav Gokhale, Nathan Earnest, Alexey Galda

Abstract: Quantum information processing holds great promise for pushing beyond the current frontiers in computing. Specifically, quantum computation promises to accelerate the solving of certain problems, and there are many opportunities for innovation based on applications in chemistry, engineering, and finance. To harness the full potential of quantum computing, however, we must not only place emphasis o… ▽ More Quantum information processing holds great promise for pushing beyond the current frontiers in computing. Specifically, quantum computation promises to accelerate the solving of certain problems, and there are many opportunities for innovation based on applications in chemistry, engineering, and finance. To harness the full potential of quantum computing, however, we must not only place emphasis on manufacturing better qubits, advancing our algorithms, and develo** quantum software. To scale devices to the fault tolerant regime, we must refine device-level quantum control. On May 17-18, 2021, the Chicago Quantum Exchange (CQE) partnered with IBM Quantum and Super.tech to host the Pulse-level Quantum Control Workshop. At the workshop, representatives from academia, national labs, and industry addressed the importance of fine-tuning quantum processing at the physical layer. The purpose of this report is to summarize the topics of this meeting for the quantum community at large. △ Less

Submitted 28 February, 2022; originally announced February 2022.

CAFQA: A classical simulation bootstrap for variational quantum algorithms

Authors: Gokul Subramanian Ravi, Pranav Gokhale, Yi Ding, William M. Kirby, Kaitlin N. Smith, Jonathan M. Baker, Peter J. Love, Henry Hoffmann, Kenneth R. Brown, Frederic T. Chong

Abstract: This work tackles the problem of finding a good ansatz initialization for Variational Quantum Algorithms (VQAs), by proposing CAFQA, a Clifford Ansatz For Quantum Accuracy. The CAFQA ansatz is a hardware-efficient circuit built with only Clifford gates. In this ansatz, the parameters for the tunable gates are chosen by searching efficiently through the Clifford parameter space via classical simula… ▽ More This work tackles the problem of finding a good ansatz initialization for Variational Quantum Algorithms (VQAs), by proposing CAFQA, a Clifford Ansatz For Quantum Accuracy. The CAFQA ansatz is a hardware-efficient circuit built with only Clifford gates. In this ansatz, the parameters for the tunable gates are chosen by searching efficiently through the Clifford parameter space via classical simulation. The resulting initial states always equal or outperform traditional classical initialization (e.g., Hartree-Fock), and enable high-accuracy VQA estimations. CAFQA is well-suited to classical computation because: a) Clifford-only quantum circuits can be exactly simulated classically in polynomial time, and b) the discrete Clifford space is searched efficiently via Bayesian Optimization. For the Variational Quantum Eigensolver (VQE) task of molecular ground state energy estimation (up to 18 qubits), CAFQA's Clifford Ansatz achieves a mean accuracy of nearly 99% and recovers as much as 99.99% of the molecular correlation energy that is lost in Hartree-Fock initialization. CAFQA achieves mean accuracy improvements of 6.4x and 56.8x, over the state-of-the-art, on different metrics. The scalability of the approach allows for preliminary ground state energy estimation of the challenging chromium dimer (Cr$_2$) molecule. With CAFQA's high-accuracy initialization, the convergence of VQAs is shown to accelerate by 2.5x, even for small molecules. Furthermore, preliminary exploration of allowing a limited number of non-Clifford (T) gates in the CAFQA framework, shows that as much as 99.9% of the correlation energy can be recovered at bond lengths for which Clifford-only CAFQA accuracy is relatively limited, while remaining classically simulable. △ Less

Submitted 29 September, 2023; v1 submitted 25 February, 2022; originally announced February 2022.

Comments: Appears at the 28th Conference on Architectural Support for Programming Languages and Operating Systems (ASPLOS 2023). Previous title - CAFQA: Clifford Ansatz For Quantum Accuracy. Paper revised to ASPLOS requirements, added additional improvements to the CAFQA framework / evaluation. Added preliminary exploration on CAFQA with T gates

SupermarQ: A Scalable Quantum Benchmark Suite

Authors: Teague Tomesh, Pranav Gokhale, Victory Omole, Gokul Subramanian Ravi, Kaitlin N. Smith, Joshua Viszlai, Xin-Chuan Wu, Nikos Hardavellas, Margaret R. Martonosi, Frederic T. Chong

Abstract: The emergence of quantum computers as a new computational paradigm has been accompanied by speculation concerning the scope and timeline of their anticipated revolutionary changes. While quantum computing is still in its infancy, the variety of different architectures used to implement quantum computations make it difficult to reliably measure and compare performance. This problem motivates our in… ▽ More The emergence of quantum computers as a new computational paradigm has been accompanied by speculation concerning the scope and timeline of their anticipated revolutionary changes. While quantum computing is still in its infancy, the variety of different architectures used to implement quantum computations make it difficult to reliably measure and compare performance. This problem motivates our introduction of SupermarQ, a scalable, hardware-agnostic quantum benchmark suite which uses application-level metrics to measure performance. SupermarQ is the first attempt to systematically apply techniques from classical benchmarking methodology to the quantum domain. We define a set of feature vectors to quantify coverage, select applications from a variety of domains to ensure the suite is representative of real workloads, and collect benchmark results from the IBM, IonQ, and AQT@LBNL platforms. Looking forward, we envision that quantum benchmarking will encompass a large cross-community effort built on open source, constantly evolving benchmark suites. We introduce SupermarQ as an important step in this direction. △ Less

Submitted 27 April, 2022; v1 submitted 22 February, 2022; originally announced February 2022.

Comments: 17 pages, 4 figures, Awarded Best Paper during the 28th IEEE International Symposium on High-Performance Computer Architecture (HPCA-28), Seoul, South Korea

Modeling Short-Range Microwave Networks to Scale Superconducting Quantum Computation

Authors: Nicholas LaRacuente, Kaitlin N. Smith, Poolad Imany, Kevin L. Silverman, Frederic T. Chong

Abstract: A core challenge for superconducting quantum computers is to scale up the number of qubits in each processor without increasing noise or cross-talk. Distributed quantum computing across small qubit arrays, known as chiplets, can address these challenges in a scalable manner. We propose a chiplet architecture over microwave links with potential to exceed monolithic performance on near-term hardware… ▽ More A core challenge for superconducting quantum computers is to scale up the number of qubits in each processor without increasing noise or cross-talk. Distributed quantum computing across small qubit arrays, known as chiplets, can address these challenges in a scalable manner. We propose a chiplet architecture over microwave links with potential to exceed monolithic performance on near-term hardware. Our methods of modeling and evaluating the chiplet architecture bridges the physical and network layers in these processors. We find evidence that distributing computation across chiplets may reduce the overall error rates associated with moving data across the device, despite higher error figures for transfers across links. Preliminary analyses suggest that latency is not substantially impacted, and that at least some applications and architectures may avoid bottlenecks around chiplet boundaries. In the long-term, short-range networks may underlie quantum computers just as local area networks underlie classical datacenters and supercomputers today. △ Less

Submitted 5 January, 2023; v1 submitted 21 January, 2022; originally announced January 2022.

Comments: 23 pages, 11 figures

VAQEM: A Variational Approach to Quantum Error Mitigation

Authors: Gokul Subramanian Ravi, Kaitlin N. Smith, Pranav Gokhale, Andrea Mari, Nathan Earnest, Ali Javadi-Abhari, Frederic T. Chong

Abstract: Variational Quantum Algorithms (VQAs) are relatively robust to noise, but errors are still a significant detriment to VQAs on near-term quantum machines. It is imperative to employ error mitigation techniques to improve VQA fidelity. While existing error mitigation techniques built from theory provide substantial gains, the disconnect between theory and real machine execution limits their benefits… ▽ More Variational Quantum Algorithms (VQAs) are relatively robust to noise, but errors are still a significant detriment to VQAs on near-term quantum machines. It is imperative to employ error mitigation techniques to improve VQA fidelity. While existing error mitigation techniques built from theory provide substantial gains, the disconnect between theory and real machine execution limits their benefits. Thus, it is critical to optimize mitigation techniques to explicitly suit the target application as well as the noise characteristics of the target machine. We propose VAQEM, which dynamically tailors existing error mitigation techniques to the actual, dynamic noisy execution characteristics of VQAs on a target quantum machine. We do so by tuning specific features of these mitigation techniques similar to the traditional rotation angle parameters - by targeting improvements towards a specific objective function which represents the VQA problem at hand. In this paper, we target two types of error mitigation techniques which are suited to idle times in quantum circuits: single qubit gate scheduling and the insertion of dynamical decoupling sequences. We gain substantial improvements to VQA objective measurements - a mean of over 3x across a variety of VQA applications, run on IBM Quantum machines. More importantly, the proposed variational approach is general and can be extended to many other error mitigation techniques whose specific configurations are hard to select a priori. Integrating more mitigation techniques into the VAQEM framework can lead to potentially realizing practically useful VQA benefits on today's noisy quantum machines. △ Less

Submitted 10 December, 2021; originally announced December 2021.

Comments: To appear at The 28th IEEE International Symposium on High-PerformanceComputer Architecture (HPCA-28)

Error Mitigation in Quantum Computers through Instruction Scheduling

Authors: Kaitlin N. Smith, Gokul Subramanian Ravi, Prakash Murali, Jonathan M. Baker, Nathan Earnest, Ali Javadi-Abhari, Frederic T. Chong

Abstract: Quantum systems have potential to demonstrate significant computational advantage, but current quantum devices suffer from the rapid accumulation of error that prevents the storage of quantum information over extended periods. The unintentional coupling of qubits to their environment and each other adds significant noise to computation, and improved methods to combat decoherence are required to bo… ▽ More Quantum systems have potential to demonstrate significant computational advantage, but current quantum devices suffer from the rapid accumulation of error that prevents the storage of quantum information over extended periods. The unintentional coupling of qubits to their environment and each other adds significant noise to computation, and improved methods to combat decoherence are required to boost the performance of quantum algorithms on real machines. While many existing techniques for mitigating error rely on adding extra gates to the circuit, calibrating new gates, or extending a circuit's runtime, this paper's primary contribution leverages the gates already present in a quantum program without extending circuit duration. We exploit circuit slack for single-qubit gates that occur in idle windows, scheduling the gates such that their timing can counteract some errors. Spin-echo corrections that mitigate decoherence on idling qubits act as inspiration for this work. Theoretical models, however, fail to capture all sources of noise in NISQ devices, making practical solutions necessary that better minimize the impact of unpredictable errors in quantum machines. This paper presents TimeStitch: a novel framework that pinpoints the optimum execution schedules for single-qubit gates within quantum circuits. TimeStitch, implemented as a compilation pass, leverages the reversible nature of quantum computation to boost the success of circuits on real quantum machines. △ Less

Submitted 10 November, 2021; v1 submitted 4 May, 2021; originally announced May 2021.