-
Qudit Dynamical Decoupling on a Superconducting Quantum Processor
Authors:
Vinay Tripathi,
Noah Goss,
Arian Vezvaee,
Long B. Nguyen,
Irfan Siddiqi,
Daniel A. Lidar
Abstract:
Multi-level qudit systems are increasingly being explored as alternatives to traditional qubit systems due to their denser information storage and processing potential. However, qudits are more susceptible to decoherence than qubits due to increased loss channels, noise sensitivity, and crosstalk. To address these challenges, we develop protocols for dynamical decoupling (DD) of qudit systems base…
▽ More
Multi-level qudit systems are increasingly being explored as alternatives to traditional qubit systems due to their denser information storage and processing potential. However, qudits are more susceptible to decoherence than qubits due to increased loss channels, noise sensitivity, and crosstalk. To address these challenges, we develop protocols for dynamical decoupling (DD) of qudit systems based on the Heisenberg-Weyl group. We implement and experimentally verify these DD protocols on a superconducting transmon processor that supports qudit operation based on qutrits $(d=3)$ and ququarts $(d=4)$. Specifically, we demonstrate single-qudit DD sequences to decouple qutrits and ququarts from system-bath-induced decoherence. We also introduce two-qudit DD sequences designed to suppress the detrimental cross-Kerr couplings between coupled qudits. This allows us to demonstrate a significant improvement in the fidelity of time-evolved qutrit Bell states. Our results highlight the utility of leveraging DD to enable scalable qudit-based quantum computing.
△ Less
Submitted 5 July, 2024;
originally announced July 2024.
-
ML-Powered FPGA-based Real-Time Quantum State Discrimination Enabling Mid-circuit Measurements
Authors:
Neel R. Vora,
Yilun Xu,
Akel Hashim,
Neelay Fruitwala,
Ho Nam Nguyen,
Haoran Liao,
Jan Balewski,
Abhi Rajagopala,
Kasra Nowrouzi,
Qing Ji,
K. Birgitta Whaley,
Irfan Siddiqi,
Phuc Nguyen,
Gang Huang
Abstract:
Similar to reading the transistor state in classical computers, identifying the quantum bit (qubit) state is a fundamental operation to translate quantum information. However, identifying quantum state has been the slowest and most susceptible to errors operation on superconducting quantum processors. Most existing state discrimination algorithms have only been implemented and optimized "after the…
▽ More
Similar to reading the transistor state in classical computers, identifying the quantum bit (qubit) state is a fundamental operation to translate quantum information. However, identifying quantum state has been the slowest and most susceptible to errors operation on superconducting quantum processors. Most existing state discrimination algorithms have only been implemented and optimized "after the fact" - using offline data transferred from control circuits to host computers. Real-time state discrimination is not possible because a superconducting quantum state only survives for a few hundred us, which is much shorter than the communication delay between the readout circuit and the host computer (i.e., tens of ms). Mid-circuit measurement (MCM), where measurements are conducted on qubits at intermediate stages within a quantum circuit rather than solely at the end, represents an advanced technique for qubit reuse. For MCM necessitating single-shot readout, it is imperative to employ an in-situ technique for state discrimination with low latency and high accuracy. This paper introduces QubiCML, a field-programmable gate array (FPGA) based system for real-time state discrimination enabling MCM - the ability to measure the state at the control circuit before/without transferring data to a host computer. A multi-layer neural network has been designed and deployed on an FPGA to ensure accurate in-situ state discrimination. For the first time, ML-powered quantum state discrimination has been implemented on a radio frequency system-on-chip FPGA platform. The deployed lightweight network on the FPGA only takes 54 ns to complete each inference. We evaluated QubiCML's performance on superconducting quantum processors and obtained an average accuracy of 98.5% with only 500 ns readout. QubiCML has the potential to be the standard real-time state discrimination method for the quantum community.
△ Less
Submitted 28 June, 2024; v1 submitted 26 June, 2024;
originally announced June 2024.
-
Hardware-Efficient Randomized Compiling
Authors:
Neelay Fruitwala,
Akel Hashim,
Abhi D. Rajagopala,
Yilun Xu,
Jordan Hines,
Ravi K. Naik,
Irfan Siddiqi,
Katherine Klymko,
Gang Huang,
Kasra Nowrouzi
Abstract:
Randomized compiling (RC) is an efficient method for tailoring arbitrary Markovian errors into stochastic Pauli channels. However, the standard procedure for implementing the protocol in software comes with a large experimental overhead -- namely, it scales linearly in the number of desired randomizations, each of which must be generated and measured independently. In this work, we introduce a har…
▽ More
Randomized compiling (RC) is an efficient method for tailoring arbitrary Markovian errors into stochastic Pauli channels. However, the standard procedure for implementing the protocol in software comes with a large experimental overhead -- namely, it scales linearly in the number of desired randomizations, each of which must be generated and measured independently. In this work, we introduce a hardware-efficient algorithm for performing RC on a cycle-by-cycle basis on the lowest level of our FPGA-based control hardware during the execution of a circuit. Importantly, this algorithm performs a different randomization per shot with zero runtime overhead beyond measuring a circuit without RC. We implement our algorithm using the QubiC control hardware, where we demonstrate significant reduction in the overall runtime of circuits implemented with RC, as well as a significantly lower variance in measured observables.
△ Less
Submitted 19 June, 2024;
originally announced June 2024.
-
Symmetrically Threaded SQUIDs As Next Generation Kerr-cat Qubits
Authors:
Bibek Bhandari,
Irwin Huang,
Ahmed Hajr,
Kagan Yanik,
Bingcheng Qing,
Ke Wang,
David I Santiago,
Justin Dressel,
Irfan Siddiqi,
Andrew N Jordan
Abstract:
Kerr-cat qubits are bosonic qubits with autonomous protection against bit-flips. They have been studied widely using driven Superconducting Nonlinear Asymmetric Inductive eLement (SNAIL) oscillators. We theoretically investigate an alternate circuit for the Kerr-cat qubit, namely Symmetrically Threaded SQUIDs (STS). We perform the circuit analysis and derive the Gorini-Kossakowski-Sudarshan-Lindbl…
▽ More
Kerr-cat qubits are bosonic qubits with autonomous protection against bit-flips. They have been studied widely using driven Superconducting Nonlinear Asymmetric Inductive eLement (SNAIL) oscillators. We theoretically investigate an alternate circuit for the Kerr-cat qubit, namely Symmetrically Threaded SQUIDs (STS). We perform the circuit analysis and derive the Gorini-Kossakowski-Sudarshan-Lindblad (GKLS) master equation for the Kerr-cat qubit attached to a thermal environment. We find that the lifetime time of the coherent states ($T_α$) of the Kerr-cat qubit is the same in both the STS and SNAIL circuits for weak Kerr nonlinearity. However, the STS Kerr-cat qubits have the additional benefit of being resistant against higher order photon dissipation effects, resulting in significantly longer $T_α$ even with stronger Kerr nonlinearity on the order of $10{~\rm MHz}$. We also examine the effects of strong flux driving and asymmetric Josephson junctions on $T_α$. Unlike the SNAIL design, we find a dip in $T_α$ of the STS Kerr-cat qubit for weak two-photon drive. However, we show that the dip can be mitigated by applying a suitable drive-dependent detuning. With the proposed design and considering a cat size of 10 photons, we predict $T_α$ of the order of tens of milliseconds even in the presence of multi-photon heating and dephasing effects. The robustness of the STS Kerr-cat qubit makes it a promising component for fault-tolerant quantum processors.
△ Less
Submitted 18 May, 2024;
originally announced May 2024.
-
Performance of Superconducting Resonators Suspended on SiN Membranes
Authors:
Trevor Chistolini,
Kyunghoon Lee,
Archan Banerjee,
Mohammed Alghadeer,
Christian Jünger,
M. Virginia P. Altoé,
Chengyu Song,
Sudi Chen,
Feng Wang,
David I. Santiago,
Irfan Siddiqi
Abstract:
Correlated errors in superconducting circuits due to nonequilibrium quasiparticles are a notable concern in efforts to achieve fault tolerant quantum computing. The propagation of quasiparticles causing these correlated errors can potentially be mediated by phonons in the substrate. Therefore, methods that decouple devices from the substrate are possible solutions, such as isolating devices atop S…
▽ More
Correlated errors in superconducting circuits due to nonequilibrium quasiparticles are a notable concern in efforts to achieve fault tolerant quantum computing. The propagation of quasiparticles causing these correlated errors can potentially be mediated by phonons in the substrate. Therefore, methods that decouple devices from the substrate are possible solutions, such as isolating devices atop SiN membranes. In this work, we validate the compatibility of SiN membrane technology with high quality superconducting circuits, adding the technique to the community's fabrication toolbox. We do so by fabricating superconducting coplanar waveguide resonators entirely atop a thin ($\sim$110 nm) SiN layer, where the bulk Si originally supporting it has been etched away, achieving a suspended membrane where the shortest length to its thickness yields an aspect ratio of approximately $7.4 \times 10^3$. We compare these membrane resonators to on-substrate resonators on the same chip, finding similar internal quality factors $\sim$$10^5$ at single photon levels. Furthermore, we confirm that these membranes do not adversely affect the resonator thermalization rate. With these important benchmarks validated, this technique can be extended to qubits.
△ Less
Submitted 2 May, 2024;
originally announced May 2024.
-
High-Coherence Kerr-cat qubit in 2D architecture
Authors:
Ahmed Hajr,
Bingcheng Qing,
Ke Wang,
Gerwin Koolstra,
Zahra Pedramrazi,
Ziqi Kang,
Larry Chen,
Long B. Nguyen,
Christian Junger,
Noah Goss,
Irwin Huang,
Bibek Bhandari,
Nicholas E. Frattini,
Shruti Puri,
Justin Dressel,
Andrew N. Jordan,
David Santiago,
Irfan Siddiqi
Abstract:
The Kerr-cat qubit is a bosonic qubit in which multi-photon Schrodinger cat states are stabilized by applying a two-photon drive to an oscillator with a Kerr nonlinearity. The suppressed bit-flip rate with increasing cat size makes this qubit a promising candidate to implement quantum error correction codes tailored for noise-biased qubits. However, achieving strong light-matter interactions neces…
▽ More
The Kerr-cat qubit is a bosonic qubit in which multi-photon Schrodinger cat states are stabilized by applying a two-photon drive to an oscillator with a Kerr nonlinearity. The suppressed bit-flip rate with increasing cat size makes this qubit a promising candidate to implement quantum error correction codes tailored for noise-biased qubits. However, achieving strong light-matter interactions necessary for stabilizing and controlling this qubit has traditionally required strong microwave drives that heat the qubit and degrade its performance. In contrast, increasing the coupling to the drive port removes the need for strong drives at the expense of large Purcell decay. By integrating an effective band-block filter on-chip, we overcome this trade-off and realize a Kerr-cat qubit in a scalable 2D superconducting circuit with high coherence. This filter provides 30 dB of isolation at the qubit frequency with negligible attenuation at the frequencies required for stabilization and readout. We experimentally demonstrate quantum non-demolition readout fidelity of 99.6% for a cat with 8 photons. Also, to have high-fidelity universal control over this qubit, we combine fast Rabi oscillations with a new demonstration of the X(90) gate through phase modulation of the stabilization drive. Finally, the lifetime in this architecture is examined as a function of the cat size of up to 10 photons in the oscillator achieving a bit-flip time higher than 1 ms and only a linear decrease in the phase-flip time, in good agreement with the theoretical analysis of the circuit. Our qubit shows promise as a building block for fault-tolerant quantum processors with a small footprint.
△ Less
Submitted 19 May, 2024; v1 submitted 25 April, 2024;
originally announced April 2024.
-
Distributed Architecture for FPGA-based Superconducting Qubit Control
Authors:
Neelay Fruitwala,
Gang Huang,
Yilun Xu,
Abhi Rajagopala,
Akel Hashim,
Ravi K. Naik,
Kasra Nowrouzi,
David I. Santiago,
Irfan Siddiqi
Abstract:
Quantum circuits utilizing real time feedback techniques (such as active reset and mid-circuit measurement) are a powerful tool for NISQ-era quantum computing. Such techniques are crucial for implementing error correction protocols, and can reduce the resource requirements of certain quantum algorithms. Realizing these capabilities requires flexible, low-latency classical control. We have develope…
▽ More
Quantum circuits utilizing real time feedback techniques (such as active reset and mid-circuit measurement) are a powerful tool for NISQ-era quantum computing. Such techniques are crucial for implementing error correction protocols, and can reduce the resource requirements of certain quantum algorithms. Realizing these capabilities requires flexible, low-latency classical control. We have developed a custom FPGA-based processor architecture for QubiC, an open source platform for superconducting qubit control. Our architecture is distributed in nature, and consists of a bank of lightweight cores, each configured to control a small (1-3) number of signal generator channels. Each core is capable of executing parameterized control and readout pulses, as well as performing arbitrary control flow based on mid-circuit measurement results. We have also developed a modular compiler stack and domain-specific intermediate representation for programming the processor. Our representation allows users to specify circuits using both gate and pulse-level abstractions, and includes high-level control flow constructs (e.g. if-else blocks and loops). The compiler stack is designed to integrate with quantum software tools and programming languages, such as TrueQ, pyGSTi, and OpenQASM3. In this work, we will detail the design of both the processor and compiler stack, and demonstrate its capabilities with a quantum state teleportation experiment using transmon qubits at the LBNL Advanced Quantum Testbed.
△ Less
Submitted 23 April, 2024;
originally announced April 2024.
-
Quantum Digital Simulation of Cavity Quantum Electrodynamics: Insights from Superconducting and Trapped Ion Quantum Testbeds
Authors:
Alex H. Rubin,
Brian Marinelli,
Victoria A. Norman,
Zainab Rizvi,
Ashlyn D. Burch,
Ravi K. Naik,
John Mark Kreikebaum,
Matthew N. H. Chow,
Daniel S. Lobser,
Melissa C. Revelle,
Christopher G. Yale,
Megan Ivory,
David I. Santiago,
Christopher Spitzer,
Marina Krstic-Marinkovic,
Susan M. Clark,
Irfan Siddiqi,
Marina Radulaski
Abstract:
A leading application of quantum computers is the efficient simulation of large unitary quantum systems. Extending this advantage to the study of open Cavity Quantum Electrodynamics (CQED) systems could enable the use of quantum computers in the exploration and design of many-body quantum optical devices. Such devices have promising applications in optical quantum communication, simulation, and co…
▽ More
A leading application of quantum computers is the efficient simulation of large unitary quantum systems. Extending this advantage to the study of open Cavity Quantum Electrodynamics (CQED) systems could enable the use of quantum computers in the exploration and design of many-body quantum optical devices. Such devices have promising applications in optical quantum communication, simulation, and computing. In this work, we present an early exploration of the potential for quantum computers to efficiently investigate open CQED physics. Our simulations make use of a recent quantum algorithm that maps the dynamics of a singly excited open Tavis-Cummings model containing $N$ atoms coupled to a lossy cavity. We report the results of executing this algorithm on two noisy intermediate-scale quantum computers, a superconducting processor and a trapped ion processor, to simulate the population dynamics of an open CQED system featuring $N = 3$ atoms. By applying technology-specific transpilation and error mitigation techniques, we minimize the impact of gate errors, noise, and decoherence in each hardware platform, obtaining results which agree closely with the exact solution of the system. These results provide confidence that future simulation algorithms, combined with emerging large-scale quantum processors, can be a powerful tool for studying cavity quantum electrodynamics.
△ Less
Submitted 4 April, 2024;
originally announced April 2024.
-
Efficient Generation of Multi-partite Entanglement between Non-local Superconducting Qubits using Classical Feedback
Authors:
Akel Hashim,
Ming Yuan,
Pranav Gokhale,
Larry Chen,
Christian Juenger,
Neelay Fruitwala,
Yilun Xu,
Gang Huang,
Liang Jiang,
Irfan Siddiqi
Abstract:
Quantum entanglement is one of the primary features which distinguishes quantum computers from classical computers. In gate-based quantum computing, the creation of entangled states or the distribution of entanglement across a quantum processor often requires circuit depths which grow with the number of entangled qubits. However, in teleportation-based quantum computing, one can deterministically…
▽ More
Quantum entanglement is one of the primary features which distinguishes quantum computers from classical computers. In gate-based quantum computing, the creation of entangled states or the distribution of entanglement across a quantum processor often requires circuit depths which grow with the number of entangled qubits. However, in teleportation-based quantum computing, one can deterministically generate entangled states with a circuit depth that is constant in the number of qubits, provided that one has access to an entangled resource state, the ability to perform mid-circuit measurements, and can rapidly transmit classical information. In this work, aided by fast classical FPGA-based control hardware with a feedback latency of only 150 ns, we explore the utility of teleportation-based protocols for generating non-local, multi-partite entanglement between superconducting qubits. First, we demonstrate well-known protocols for generating Greenberger-Horne-Zeilinger (GHZ) states and non-local CNOT gates in constant depth. Next, we utilize both protocols for implementing an unbounded fan-out (i.e., controlled-NOT-NOT) gate in constant depth between three non-local qubits. Finally, we demonstrate deterministic state teleportation and entanglement swap** between qubits on opposite side of our quantum processor.
△ Less
Submitted 27 March, 2024;
originally announced March 2024.
-
Empowering high-dimensional quantum computing by traversing the dual bosonic ladder
Authors:
Long B. Nguyen,
Noah Goss,
Karthik Siva,
Yosep Kim,
Ed Younis,
Bingcheng Qing,
Akel Hashim,
David I. Santiago,
Irfan Siddiqi
Abstract:
High-dimensional quantum information processing has emerged as a promising avenue to transcend hardware limitations and advance the frontiers of quantum technologies. Harnessing the untapped potential of the so-called qudits necessitates the development of quantum protocols beyond the established qubit methodologies. Here, we present a robust, hardware-efficient, and extensible approach for operat…
▽ More
High-dimensional quantum information processing has emerged as a promising avenue to transcend hardware limitations and advance the frontiers of quantum technologies. Harnessing the untapped potential of the so-called qudits necessitates the development of quantum protocols beyond the established qubit methodologies. Here, we present a robust, hardware-efficient, and extensible approach for operating multidimensional solid-state systems using Raman-assisted two-photon interactions. To demonstrate its efficacy, we construct a set of multi-qubit operations, realize highly entangled multidimensional states including atomic squeezed states and Schrödinger cat states, and implement programmable entanglement distribution along a qudit array. Our work illuminates the quantum electrodynamics of strongly driven multi-qudit systems and provides the experimental foundation for the future development of high-dimensional quantum applications.
△ Less
Submitted 29 December, 2023;
originally announced December 2023.
-
Quasi-Probabilistic Readout Correction of Mid-Circuit Measurements for Adaptive Feedback via Measurement Randomized Compiling
Authors:
Akel Hashim,
Arnaud Carignan-Dugas,
Larry Chen,
Christian Juenger,
Neelay Fruitwala,
Yilun Xu,
Gang Huang,
Joel J. Wallman,
Irfan Siddiqi
Abstract:
Quantum measurements are a fundamental component of quantum computing. However, on modern-day quantum computers, measurements can be more error prone than quantum gates, and are susceptible to non-unital errors as well as non-local correlations due to measurement crosstalk. While readout errors can be mitigated in post-processing, it is inefficient in the number of qubits due to a combinatorially-…
▽ More
Quantum measurements are a fundamental component of quantum computing. However, on modern-day quantum computers, measurements can be more error prone than quantum gates, and are susceptible to non-unital errors as well as non-local correlations due to measurement crosstalk. While readout errors can be mitigated in post-processing, it is inefficient in the number of qubits due to a combinatorially-large number of possible states that need to be characterized. In this work, we show that measurement errors can be tailored into a simple stochastic error model using randomized compiling, enabling the efficient mitigation of readout errors via quasi-probability distributions reconstructed from the measurement of a single preparation state in an exponentially large confusion matrix. We demonstrate the scalability and power of this approach by correcting readout errors without matrix inversion on a large number of different preparation states applied to a register of eight superconducting transmon qubits. Moreover, we show that this method can be extended to mid-circuit measurements used for active feedback via quasi-probabilistic error cancellation, and demonstrate the correction of measurement errors on an ancilla qubit used to detect and actively correct bit-flip errors on an entangled memory qubit. Our approach enables the correction of readout errors on large numbers of qubits, and offers a strategy for correcting readout errors in adaptive circuits in which the results of mid-circuit measurements are used to perform conditional operations on non-local qubits in real time.
△ Less
Submitted 2 May, 2024; v1 submitted 21 December, 2023;
originally announced December 2023.
-
Broadband CPW-based impedance-transformed Josephson parametric amplifier
Authors:
Bingcheng Qing,
Long B. Nguyen,
Xinyu Liu,
Hengjiang Ren,
William P. Livingston,
Noah Goss,
Ahmed Hajr,
Trevor Chistolini,
Zahra Pedramrazi,
David I. Santiago,
Jie Luo,
Irfan Siddiqi
Abstract:
Quantum-limited Josephson parametric amplifiers play a pivotal role in advancing the field of circuit quantum electrodynamics by enabling the fast and high-fidelity measurement of weak microwave signals. Therefore, it is necessary to develop robust parametric amplifiers with low noise, broad bandwidth, and reduced design complexity for microwave detection. However, current broadband parametric amp…
▽ More
Quantum-limited Josephson parametric amplifiers play a pivotal role in advancing the field of circuit quantum electrodynamics by enabling the fast and high-fidelity measurement of weak microwave signals. Therefore, it is necessary to develop robust parametric amplifiers with low noise, broad bandwidth, and reduced design complexity for microwave detection. However, current broadband parametric amplifiers either have degraded noise performance or rely on complex designs. Here, we present a device based on the broadband impedance-transformed Josephson parametric amplifier (IMPA) that integrates a horn-like coplanar waveguide (CPW) transmission line, which significantly decreases the design and fabrication complexity, while kee** comparable performance. The device shows an instantaneous bandwidth of 700(200) MHz for 15(20) dB gain with an average saturation power of -110 dBm and near quantum-limited added noise. The operating frequency can be tuned over 1.4 GHz using an external flux bias. We further demonstrate the negligible back-action from our device on a transmon qubit. The amplification performance and simplicity of our device promise its wide adaptation in quantum metrology, quantum communication, and quantum information processing.
△ Less
Submitted 25 October, 2023;
originally announced October 2023.
-
QubiC 2.0: An Extensible Open-Source Qubit Control System Capable of Mid-Circuit Measurement and Feed-Forward
Authors:
Yilun Xu,
Gang Huang,
Neelay Fruitwala,
Abhi Rajagopala,
Ravi K. Naik,
Kasra Nowrouzi,
David I. Santiago,
Irfan Siddiqi
Abstract:
Researchers manipulate and measure quantum processing units via the classical electronics control system. We developed an open-source FPGA-based quantum bit control system called QubiC for superconducting qubits. After a few years of qubit calibration and testing experience on QubiC 1.0, we recognized the need for mid-circuit measurements and feed-forward capabilities to implement advanced quantum…
▽ More
Researchers manipulate and measure quantum processing units via the classical electronics control system. We developed an open-source FPGA-based quantum bit control system called QubiC for superconducting qubits. After a few years of qubit calibration and testing experience on QubiC 1.0, we recognized the need for mid-circuit measurements and feed-forward capabilities to implement advanced quantum algorithms effectively. Moreover, following the development of RFSoC technology, we upgraded the system to QubiC 2.0 on an Xilinx ZCU216 evaluation board and developed all these enriched features. The system uses portable FPGA gateware with a simplified processor to handle commands on-the-fly. For design simplicity and straightforward scaling, we adopted a multi-core distributed architecture, assigning one processor core per qubit. The actual pulses combine the unique pulse envelope and carrier information specified in a command. Each pulse envelope is pre-stored on FPGA's block RAMs, ensuring the speed and reusability during the whole circuit. The pulse parameters including amplitude, phase, and frequency can be updated from pulse to pulse. The software stack is developed in Python, running on both the FPGA's ARM core and host computer via XML-RPC. The quantum circuit can be described in a high-level language, which supports programming at both pulse-level and native-gate level, and includes high-level control flow constructs. The QubiC software stack compiles these quantum programs into binary commands that can be loaded into the FPGA. With Qubic 2.0, we successfully achieved multi-FPGA synchronization in bench tests and demonstrated simplified feed-forward experiments on conditional circuits. The enhanced QubiC system represents a significant step forward in quantum computing, providing researchers with powerful tools to explore and implement advanced quantum algorithms and applications.
△ Less
Submitted 19 September, 2023;
originally announced September 2023.
-
Extending the Computational Reach of a Superconducting Qutrit Processor
Authors:
Noah Goss,
Samuele Ferracin,
Akel Hashim,
Arnaud Carignan-Dugas,
John Mark Kreikebaum,
Ravi K. Naik,
David I. Santiago,
Irfan Siddiqi
Abstract:
Quantum computing with qudits is an emerging approach that exploits a larger, more-connected computational space, providing advantages for many applications, including quantum simulation and quantum error correction. Nonetheless, qudits are typically afflicted by more complex errors and suffer greater noise sensitivity which renders their scaling difficult. In this work, we introduce techniques to…
▽ More
Quantum computing with qudits is an emerging approach that exploits a larger, more-connected computational space, providing advantages for many applications, including quantum simulation and quantum error correction. Nonetheless, qudits are typically afflicted by more complex errors and suffer greater noise sensitivity which renders their scaling difficult. In this work, we introduce techniques to tailor and mitigate arbitrary Markovian noise in qudit circuits. We experimentally demonstrate these methods on a superconducting transmon qutrit processor, and benchmark their effectiveness for multipartite qutrit entanglement and random circuit sampling, obtaining up to 3x improvement in our results. To the best of our knowledge, this constitutes the first ever error mitigation experiment performed on qutrits. Our work shows that despite the intrinsic complexity of manipulating higher-dimensional quantum systems, noise tailoring and error mitigation can significantly extend the computational reach of today's qudit processors.
△ Less
Submitted 25 May, 2023;
originally announced May 2023.
-
Dynamically Reconfigurable Photon Exchange in a Superconducting Quantum Processor
Authors:
Brian Marinelli,
Jie Luo,
Hengjiang Ren,
Bethany M. Niedzielski,
David K. Kim,
Rabindra Das,
Mollie Schwartz,
David I. Santiago,
Irfan Siddiqi
Abstract:
Realizing the advantages of quantum computation requires access to the full Hilbert space of states of many quantum bits (qubits). Thus, large-scale quantum computation faces the challenge of efficiently generating entanglement between many qubits. In systems with a limited number of direct connections between qubits, entanglement between non-nearest neighbor qubits is generated by a series of nea…
▽ More
Realizing the advantages of quantum computation requires access to the full Hilbert space of states of many quantum bits (qubits). Thus, large-scale quantum computation faces the challenge of efficiently generating entanglement between many qubits. In systems with a limited number of direct connections between qubits, entanglement between non-nearest neighbor qubits is generated by a series of nearest neighbor gates, which exponentially suppresses the resulting fidelity. Here we propose and demonstrate a novel, on-chip photon exchange network. This photonic network is embedded in a superconducting quantum processor (QPU) to implement an arbitrarily reconfigurable qubit connectivity graph. We show long-range qubit-qubit interactions between qubits with a maximum spatial separation of $9.2~\text{cm}$ along a meandered bus resonator and achieve photon exchange rates up to $g_{\text{qq}} = 2π\times 0.9~\text{MHz}$. These experimental demonstrations provide a foundation to realize highly connected, reconfigurable quantum photonic networks and opens a new path towards modular quantum computing.
△ Less
Submitted 6 March, 2023;
originally announced March 2023.
-
A quantum-classical co-processing protocol towards simulating nuclear reactions on contemporary quantum hardware
Authors:
Francesco Turro,
Trevor Chistolini,
Akel Hashim,
Yosep Kim,
William Livingston,
Kyle. A. Wendt,
Jonathan L Dubois,
Francesco Pederiva,
Sofia Quaglioni,
David I. Santiago,
Irfan Siddiqi
Abstract:
Quantum computers hold great promise for arriving at exact simulations of nuclear dynamical processes (e.g., scattering and reactions) that are paramount to the study of nuclear matter at the limit of stability and to explaining the formation of chemical elements in stars. However, quantum simulations of the unitary (real) time dynamics of fermionic many-body systems require a currently prohibitiv…
▽ More
Quantum computers hold great promise for arriving at exact simulations of nuclear dynamical processes (e.g., scattering and reactions) that are paramount to the study of nuclear matter at the limit of stability and to explaining the formation of chemical elements in stars. However, quantum simulations of the unitary (real) time dynamics of fermionic many-body systems require a currently prohibitive number of reliable and long-lived qubits. We propose a co-processing algorithm for the simulation of real-time dynamics in which the time evolution of the spatial coordinates is carried out on a classical processor, while the evolution of the spin degrees of freedom is carried out on a quantum processor. This hybrid algorithm is demonstrated by a quantum simulation of the scattering of two neutrons performed at the Lawrence Berkeley National Laboratory's Advanced Quantum Testbed. We show that, after implementation of error mitigation strategies to improve the accuracy of the algorithm in addition to the use of either circuit compression techniques or tomography as methods to elucidate the onset of decoherence, this initial demonstration validates the principle of the proposed co-processing scheme. We anticipate that a generalization of this present scheme will open the way for (real-time) path integral simulations of nuclear scattering.
△ Less
Submitted 26 September, 2023; v1 submitted 13 February, 2023;
originally announced February 2023.
-
Quantum Computation of Frequency-Domain Molecular Response Properties Using a Three-Qubit iToffoli Gate
Authors:
Shi-Ning Sun,
Brian Marinelli,
** Ming Koh,
Yosep Kim,
Long B. Nguyen,
Larry Chen,
John Mark Kreikebaum,
David I. Santiago,
Irfan Siddiqi,
Austin J. Minnich
Abstract:
The quantum computation of molecular response properties on near-term quantum hardware is a topic of significant interest. While computing time-domain response properties is in principle straightforward due to the natural ability of quantum computers to simulate unitary time evolution, circuit depth limitations restrict the maximum time that can be simulated and hence the extraction of frequency-d…
▽ More
The quantum computation of molecular response properties on near-term quantum hardware is a topic of significant interest. While computing time-domain response properties is in principle straightforward due to the natural ability of quantum computers to simulate unitary time evolution, circuit depth limitations restrict the maximum time that can be simulated and hence the extraction of frequency-domain properties. Computing properties directly in the frequency domain is therefore desirable, but the circuits require large depth when the typical hardware gate set consisting of single- and two-qubit gates is used. Here, we report the experimental quantum computation of the response properties of diatomic molecules directly in the frequency domain using a three-qubit iToffoli gate, enabling a reduction in circuit depth by a factor of two. We show that the molecular properties obtained with the iToffoli gate exhibit comparable or better agreement with theory than those obtained with the native CZ gates. Our work is among the first demonstrations of the practical usage of a native multi-qubit gate in quantum simulation, with diverse potential applications to the simulation of quantum many-body systems on near-term digital quantum computers.
△ Less
Submitted 8 February, 2023;
originally announced February 2023.
-
Programmable Heisenberg interactions between Floquet qubits
Authors:
Long B. Nguyen,
Yosep Kim,
Akel Hashim,
Noah Goss,
Brian Marinelli,
Bibek Bhandari,
Debmalya Das,
Ravi K. Naik,
John Mark Kreikebaum,
Andrew N. Jordan,
David I. Santiago,
Irfan Siddiqi
Abstract:
The fundamental trade-off between robustness and tunability is a central challenge in the pursuit of quantum simulation and fault-tolerant quantum computation. In particular, many emerging quantum architectures are designed to achieve high coherence at the expense of having fixed spectra and consequently limited types of controllable interactions. Here, by adiabatically transforming fixed-frequenc…
▽ More
The fundamental trade-off between robustness and tunability is a central challenge in the pursuit of quantum simulation and fault-tolerant quantum computation. In particular, many emerging quantum architectures are designed to achieve high coherence at the expense of having fixed spectra and consequently limited types of controllable interactions. Here, by adiabatically transforming fixed-frequency superconducting circuits into modifiable Floquet qubits, we demonstrate an XXZ Heisenberg interaction with fully adjustable anisotropy. This interaction model is on one hand the basis for many-body quantum simulation of spin systems, and on the other hand the primitive for an expressive quantum gate set. To illustrate the robustness and versatility of our Floquet protocol, we tailor the Heisenberg Hamiltonian and implement two-qubit iSWAP, CZ, and SWAP gates with estimated fidelities of 99.32(3)%, 99.72(2)%, and 98.93(5)%, respectively. In addition, we implement a Heisenberg interaction between higher energy levels and employ it to construct a three-qubit CCZ gate with a fidelity of 96.18(5)%. Importantly, the protocol is applicable to various fixed-frequency high-coherence platforms, thereby unlocking a suite of essential interactions for high-performance quantum information processing. From a broader perspective, our work provides compelling avenues for future exploration of quantum electrodynamics and optimal control using the Floquet framework.
△ Less
Submitted 18 November, 2022;
originally announced November 2022.
-
Time-Dependent Hamiltonian Reconstruction using Continuous Weak Measurements
Authors:
Karthik Siva,
Gerwin Koolstra,
John Steinmetz,
William P. Livingston,
Debmalya Das,
Larry Chen,
John Mark Kreikebaum,
Noah Stevenson,
Christian Jünger,
David I. Santiago,
Irfan Siddiqi,
Andrew N. Jordan
Abstract:
Reconstructing the Hamiltonian of a quantum system is an essential task for characterizing and certifying quantum processors and simulators. Existing techniques either rely on projective measurements of the system before and after coherent time evolution and do not explicitly reconstruct the full time-dependent Hamiltonian or interrupt evolution for tomography. Here, we experimentally demonstrate…
▽ More
Reconstructing the Hamiltonian of a quantum system is an essential task for characterizing and certifying quantum processors and simulators. Existing techniques either rely on projective measurements of the system before and after coherent time evolution and do not explicitly reconstruct the full time-dependent Hamiltonian or interrupt evolution for tomography. Here, we experimentally demonstrate that an a priori unknown, time-dependent Hamiltonian can be reconstructed from continuous weak measurements concurrent with coherent time evolution in a system of two superconducting transmons coupled by a flux-tunable coupler. In contrast to previous work, our technique does not require interruptions, which would distort the recovered Hamiltonian. We introduce an algorithm which recovers the Hamiltonian and density matrix from an incomplete set of continuous measurements and demonstrate that it reliably extracts amplitudes of a variety of single qubit and entangling two qubit Hamiltonians. We further demonstrate how this technique reveals deviations from a theoretical control Hamiltonian which would otherwise be missed by conventional techniques. Our work opens up novel applications for continuous weak measurements, such as studying non-idealities in gates, certifying analog quantum simulators, and performing quantum metrology.
△ Less
Submitted 14 November, 2022;
originally announced November 2022.
-
Benchmarking quantum logic operations relative to thresholds for fault tolerance
Authors:
Akel Hashim,
Stefan Seritan,
Timothy Proctor,
Kenneth Rudinger,
Noah Goss,
Ravi K. Naik,
John Mark Kreikebaum,
David I. Santiago,
Irfan Siddiqi
Abstract:
Contemporary methods for benchmarking noisy quantum processors typically measure average error rates or process infidelities. However, thresholds for fault-tolerant quantum error correction are given in terms of worst-case error rates -- defined via the diamond norm -- which can differ from average error rates by orders of magnitude. One method for resolving this discrepancy is to randomize the ph…
▽ More
Contemporary methods for benchmarking noisy quantum processors typically measure average error rates or process infidelities. However, thresholds for fault-tolerant quantum error correction are given in terms of worst-case error rates -- defined via the diamond norm -- which can differ from average error rates by orders of magnitude. One method for resolving this discrepancy is to randomize the physical implementation of quantum gates, using techniques like randomized compiling (RC). In this work, we use gate set tomography to perform precision characterization of a set of two-qubit logic gates to study RC on a superconducting quantum processor. We find that, under RC, gate errors are accurately described by a stochastic Pauli noise model without coherent errors, and that spatially-correlated coherent errors and non-Markovian errors are strongly suppressed. We further show that the average and worst-case error rates are equal for randomly compiled gates, and measure a maximum worst-case error of 0.0197(3) for our gate set. Our results show that randomized benchmarks are a viable route to both verifying that a quantum processor's error rates are below a fault-tolerance threshold, and to bounding the failure rates of near-term algorithms, if -- and only if -- gates are implemented via randomization methods which tailor noise.
△ Less
Submitted 1 December, 2023; v1 submitted 18 July, 2022;
originally announced July 2022.
-
Demonstrating scalable randomized benchmarking of universal gate sets
Authors:
Jordan Hines,
Marie Lu,
Ravi K. Naik,
Akel Hashim,
Jean-Loup Ville,
Brad Mitchell,
John Mark Kriekebaum,
David I. Santiago,
Stefan Seritan,
Erik Nielsen,
Robin Blume-Kohout,
Kevin Young,
Irfan Siddiqi,
Birgitta Whaley,
Timothy Proctor
Abstract:
Randomized benchmarking (RB) protocols are the most widely used methods for assessing the performance of quantum gates. However, the existing RB methods either do not scale to many qubits or cannot benchmark a universal gate set. Here, we introduce and demonstrate a technique for scalable RB of many universal and continuously parameterized gate sets, using a class of circuits called randomized mir…
▽ More
Randomized benchmarking (RB) protocols are the most widely used methods for assessing the performance of quantum gates. However, the existing RB methods either do not scale to many qubits or cannot benchmark a universal gate set. Here, we introduce and demonstrate a technique for scalable RB of many universal and continuously parameterized gate sets, using a class of circuits called randomized mirror circuits. Our technique can be applied to a gate set containing an entangling Clifford gate and the set of arbitrary single-qubit gates, as well as gate sets containing controlled rotations about the Pauli axes. We use our technique to benchmark universal gate sets on four qubits of the Advanced Quantum Testbed, including a gate set containing a controlled-S gate and its inverse, and we investigate how the observed error rate is impacted by the inclusion of non-Clifford gates. Finally, we demonstrate that our technique scales to many qubits with experiments on a 27-qubit IBM Q processor. We use our technique to quantify the impact of crosstalk on this 27-qubit device, and we find that it contributes approximately 2/3 of the total error per gate in random many-qubit circuit layers.
△ Less
Submitted 10 October, 2023; v1 submitted 14 July, 2022;
originally announced July 2022.
-
Multipartite Entanglement in Rabi Driven Superconducting Qubits
Authors:
M. Lu,
J. L. Ville,
J. Cohen,
A. Petrescu,
S. Schreppler,
L. Chen,
C. Jünger,
C. Pelletti,
A. Marchenkov,
A. Banerjee,
W. Livingston,
J. M. Kreikebaum,
D. Santiago,
A. Blais,
I. Siddiqi
Abstract:
Exploring highly connected networks of qubits is invaluable for implementing various quantum algorithms and simulations as it allows for entangling qubits with reduced circuit depth. Here, we demonstrate a multi-qubit STAR (Sideband Tone Assisted Rabi driven) gate. Our scheme is inspired by the ion qubit Mølmer-Sørensen gate and is mediated by a shared photonic mode and Rabi-driven superconducting…
▽ More
Exploring highly connected networks of qubits is invaluable for implementing various quantum algorithms and simulations as it allows for entangling qubits with reduced circuit depth. Here, we demonstrate a multi-qubit STAR (Sideband Tone Assisted Rabi driven) gate. Our scheme is inspired by the ion qubit Mølmer-Sørensen gate and is mediated by a shared photonic mode and Rabi-driven superconducting qubits, which relaxes restrictions on qubit frequencies during fabrication and supports scalability. We achieve a two-qubit gate with maximum state fidelity of 0.95 in 310 ns, a three-qubit gate with state fidelity 0.905 in 217 ns, and a four-qubit gate with state fidelity 0.66 in 200 ns. Furthermore, we develop a model of the gate that show the four-qubit gate is limited by shared resonator losses and the spread of qubit-resonator couplings, which must be addressed to reach high-fidelity operations.
△ Less
Submitted 19 July, 2022; v1 submitted 30 June, 2022;
originally announced July 2022.
-
High-Fidelity Qutrit Entangling Gates for Superconducting Circuits
Authors:
Noah Goss,
Alexis Morvan,
Brian Marinelli,
Bradley K. Mitchell,
Long B. Nguyen,
Ravi K. Naik,
Larry Chen,
Christian Jünger,
John Mark Kreikebaum,
David I. Santiago,
Joel J. Wallman,
Irfan Siddiqi
Abstract:
Ternary quantum information processing in superconducting devices poses a promising alternative to its more popular binary counterpart through larger, more connected computational spaces and proposed advantages in quantum simulation and error correction. Although generally operated as qubits, transmons have readily addressable higher levels, making them natural candidates for operation as quantum…
▽ More
Ternary quantum information processing in superconducting devices poses a promising alternative to its more popular binary counterpart through larger, more connected computational spaces and proposed advantages in quantum simulation and error correction. Although generally operated as qubits, transmons have readily addressable higher levels, making them natural candidates for operation as quantum three-level systems (qutrits). Recent works in transmon devices have realized high fidelity single qutrit operation. Nonetheless, effectively engineering a high-fidelity two-qutrit entanglement remains a central challenge for realizing qutrit processing in a transmon device. In this work, we apply the differential AC Stark shift to implement a flexible, microwave-activated, and dynamic cross-Kerr entanglement between two fixed-frequency transmon qutrits, expanding on work performed for the $ZZ$ interaction with transmon qubits. We then use this interaction to engineer efficient, high-fidelity qutrit CZ$^†$ and CZ gates, with estimated process fidelities of 97.3(1)% and 95.2(3)% respectively, a significant step forward for operating qutrits on a multi-transmon device.
△ Less
Submitted 29 June, 2023; v1 submitted 14 June, 2022;
originally announced June 2022.
-
Effects of Laser-Annealing on Fixed-Frequency Superconducting Qubits
Authors:
Hyunseong Kim,
Christian Jünger,
Alexis Morvan,
Edward S. Barnard,
William P. Livingston,
M. Virginia P. Altoé,
Yosep Kim,
Chengyu Song,
Larry Chen,
John Mark Kreikebaum,
D. Frank Ogletree,
David I. Santiago,
Irfan Siddiqi
Abstract:
As superconducting quantum processors increase in complexity, techniques to overcome constraints on frequency crowding are needed. The recently developed method of laser-annealing provides an effective post-fabrication method to adjust the frequency of superconducting qubits. Here, we present an automated laser-annealing apparatus based on conventional microscopy components and demonstrate preserv…
▽ More
As superconducting quantum processors increase in complexity, techniques to overcome constraints on frequency crowding are needed. The recently developed method of laser-annealing provides an effective post-fabrication method to adjust the frequency of superconducting qubits. Here, we present an automated laser-annealing apparatus based on conventional microscopy components and demonstrate preservation of highly coherent transmons. In one case, we observe a two-fold increase in coherence after laser-annealing and perform noise spectroscopy on this qubit to investigate the change in defect features, in particular two-level system defects. Finally, we present a local heating model as well as demonstrate aging stability for laser-annealing on the wafer scale. Our work constitutes an important first step towards both understanding the underlying physical mechanism and scaling up laser-annealing of superconducting qubits.
△ Less
Submitted 7 June, 2022;
originally announced June 2022.
-
Quantum Simulation for High Energy Physics
Authors:
Christian W. Bauer,
Zohreh Davoudi,
A. Baha Balantekin,
Tanmoy Bhattacharya,
Marcela Carena,
Wibe A. de Jong,
Patrick Draper,
Aida El-Khadra,
Nate Gemelke,
Masanori Hanada,
Dmitri Kharzeev,
Henry Lamm,
Ying-Ying Li,
Junyu Liu,
Mikhail Lukin,
Yannick Meurice,
Christopher Monroe,
Benjamin Nachman,
Guido Pagano,
John Preskill,
Enrico Rinaldi,
Alessandro Roggero,
David I. Santiago,
Martin J. Savage,
Irfan Siddiqi
, et al. (6 additional authors not shown)
Abstract:
It is for the first time that Quantum Simulation for High Energy Physics (HEP) is studied in the U.S. decadal particle-physics community planning, and in fact until recently, this was not considered a mainstream topic in the community. This fact speaks of a remarkable rate of growth of this subfield over the past few years, stimulated by the impressive advancements in Quantum Information Sciences…
▽ More
It is for the first time that Quantum Simulation for High Energy Physics (HEP) is studied in the U.S. decadal particle-physics community planning, and in fact until recently, this was not considered a mainstream topic in the community. This fact speaks of a remarkable rate of growth of this subfield over the past few years, stimulated by the impressive advancements in Quantum Information Sciences (QIS) and associated technologies over the past decade, and the significant investment in this area by the government and private sectors in the U.S. and other countries. High-energy physicists have quickly identified problems of importance to our understanding of nature at the most fundamental level, from tiniest distances to cosmological extents, that are intractable with classical computers but may benefit from quantum advantage. They have initiated, and continue to carry out, a vigorous program in theory, algorithm, and hardware co-design for simulations of relevance to the HEP mission. This community whitepaper is an attempt to bring this exciting and yet challenging area of research to the spotlight, and to elaborate on what the promises, requirements, challenges, and potential solutions are over the next decade and beyond.
△ Less
Submitted 7 April, 2022;
originally announced April 2022.
-
Fast high-fidelity single-shot readout of spins in silicon using a single-electron box
Authors:
G. A. Oakes,
V. N. Ciriano-Tejel,
D. Wise,
M. A. Fogarty,
T. Lundberg,
C. Lainé,
S. Schaal,
F. Martins,
D. J. Ibberson,
L. Hutin,
B. Bertrand,
N. Stelmashenko,
J. A. W. Robinson,
L. Ibberson,
A. Hashim,
I. Siddiqi,
A. Lee,
M. Vinet,
C. G. Smith,
J. J. L. Morton,
M. F. Gonzalez-Zalba
Abstract:
Three key metrics for readout systems in quantum processors are measurement speed, fidelity and footprint. Fast high-fidelity readout enables mid-circuit measurements, a necessary feature for many dynamic algorithms and quantum error correction, while a small footprint facilitates the design of scalable, highly-connected architectures with the associated increase in computing performance. Here, we…
▽ More
Three key metrics for readout systems in quantum processors are measurement speed, fidelity and footprint. Fast high-fidelity readout enables mid-circuit measurements, a necessary feature for many dynamic algorithms and quantum error correction, while a small footprint facilitates the design of scalable, highly-connected architectures with the associated increase in computing performance. Here, we present two complementary demonstrations of fast high-fidelity single-shot readout of spins in silicon quantum dots using a compact, dispersive charge sensor: a radio-frequency single-electron box. The sensor, despite requiring fewer electrodes than conventional detectors, performs at the state-of-the-art achieving spin read-out fidelity of 99.2% in less than 6 $μ$s. We demonstrate that low-loss high-impedance resonators, highly coupled to the sensing dot, in conjunction with Josephson parametric amplification are instrumental in achieving optimal performance. We quantify the benefit of Pauli spin blockade over spin-dependent tunneling to a reservoir, as the spin-to-charge conversion mechanism in these readout schemes. Our results place dispersive charge sensing at the forefront of readout methodologies for scalable semiconductor spin-based quantum processors.
△ Less
Submitted 13 March, 2022;
originally announced March 2022.
-
Broadband Squeezed Microwaves and Amplification with a Josephson Traveling-Wave Parametric Amplifier
Authors:
Jack Y. Qiu,
Arne Grimsmo,
Kaidong Peng,
Bharath Kannan,
Benjamin Lienhard,
Youngkyu Sung,
Philip Krantz,
Vladimir Bolkhovsky,
Greg Calusine,
David Kim,
Alex Melville,
Bethany M. Niedzielski,
Jonilyn Yoder,
Mollie E. Schwartz,
Terry P. Orlando,
Irfan Siddiqi,
Simon Gustavsson,
Kevin P. O'Brien,
William D. Oliver
Abstract:
Squeezing of the electromagnetic vacuum is an essential metrological technique used to reduce quantum noise in applications spanning gravitational wave detection, biological microscopy, and quantum information science. In superconducting circuits, the resonator-based Josephson-junction parametric amplifiers conventionally used to generate squeezed microwaves are constrained by a narrow bandwidth a…
▽ More
Squeezing of the electromagnetic vacuum is an essential metrological technique used to reduce quantum noise in applications spanning gravitational wave detection, biological microscopy, and quantum information science. In superconducting circuits, the resonator-based Josephson-junction parametric amplifiers conventionally used to generate squeezed microwaves are constrained by a narrow bandwidth and low dynamic range. In this work, we develop a dual-pump, broadband Josephson traveling-wave parametric amplifier that combines a phase-sensitive extinction ratio of 56 dB with single-mode squeezing on par with the best resonator-based squeezers. We also demonstrate two-mode squeezing at microwave frequencies with bandwidth in the gigahertz range that is almost two orders of magnitude wider than that of contemporary resonator-based squeezers. Our amplifier is capable of simultaneously creating entangled microwave photon pairs with large frequency separation, with potential applications including high-fidelity qubit readout, quantum illumination and teleportation.
△ Less
Submitted 15 February, 2023; v1 submitted 26 January, 2022;
originally announced January 2022.
-
Efficiently improving the performance of noisy quantum computers
Authors:
Samuele Ferracin,
Akel Hashim,
Jean-Loup Ville,
Ravi Naik,
Arnaud Carignan-Dugas,
Hammam Qassim,
Alexis Morvan,
David I. Santiago,
Irfan Siddiqi,
Joel J. Wallman
Abstract:
Using near-term quantum computers to achieve a quantum advantage requires efficient strategies to improve the performance of the noisy quantum devices presently available. We develop and experimentally validate two efficient error mitigation protocols named "Noiseless Output Extrapolation" and "Pauli Error Cancellation" that can drastically enhance the performance of quantum circuits composed of n…
▽ More
Using near-term quantum computers to achieve a quantum advantage requires efficient strategies to improve the performance of the noisy quantum devices presently available. We develop and experimentally validate two efficient error mitigation protocols named "Noiseless Output Extrapolation" and "Pauli Error Cancellation" that can drastically enhance the performance of quantum circuits composed of noisy cycles of gates. By combining popular mitigation strategies such as probabilistic error cancellation and noise amplification with efficient noise reconstruction methods, our protocols can mitigate a wide range of noise processes that do not satisfy the assumptions underlying existing mitigation protocols, including non-local and gate-dependent processes. We test our protocols on a four-qubit superconducting processor at the Advanced Quantum Testbed. We observe significant improvements in the performance of both structured and random circuits, with up to $86\%$ improvement in variation distance over the unmitigated outputs. Our experiments demonstrate the effectiveness of our protocols, as well as their practicality for current hardware platforms.
△ Less
Submitted 6 July, 2024; v1 submitted 25 January, 2022;
originally announced January 2022.
-
Scalable High-Performance Fluxonium Quantum Processor
Authors:
Long B. Nguyen,
Gerwin Koolstra,
Yosep Kim,
Alexis Morvan,
Trevor Chistolini,
Shraddha Singh,
Konstantin N. Nesterov,
Christian Jünger,
Larry Chen,
Zahra Pedramrazi,
Bradley K. Mitchell,
John Mark Kreikebaum,
Shruti Puri,
David I. Santiago,
Irfan Siddiqi
Abstract:
The technological development of hardware heading toward universal fault-tolerant quantum computation requires a large-scale processing unit with high performance. While fluxonium qubits are promising with high coherence and large anharmonicity, their scalability has not been systematically explored. In this work, we propose a superconducting quantum information processor based on compact high-coh…
▽ More
The technological development of hardware heading toward universal fault-tolerant quantum computation requires a large-scale processing unit with high performance. While fluxonium qubits are promising with high coherence and large anharmonicity, their scalability has not been systematically explored. In this work, we propose a superconducting quantum information processor based on compact high-coherence fluxoniums with suppressed crosstalk, reduced design complexity, improved operational efficiency, high-fidelity gates, and resistance to parameter fluctuations. In this architecture, the qubits are readout dispersively using individual resonators connected to a common bus and manipulated via combined on-chip RF and DC control lines, both of which can be designed to have low crosstalk. A multi-path coupling approach enables exchange interactions between the high-coherence computational states and at the same time suppresses the spurious static ZZ rate, leading to fast and high-fidelity entangling gates. We numerically investigate the cross resonance controlled-NOT and the differential AC-Stark controlled-Z operations, revealing low gate error for qubit-qubit detuning bandwidth of up to 1 GHz. Our study on frequency crowding indicates high fabrication yield for quantum processors consisting of over thousands of qubits. In addition, we estimate low resource overhead to suppress logical error rate using the XZZX surface code. These results promise a scalable quantum architecture with high performance for the pursuit of universal quantum computation.
△ Less
Submitted 5 February, 2022; v1 submitted 23 January, 2022;
originally announced January 2022.
-
Optimizing frequency allocation for fixed-frequency superconducting quantum processors
Authors:
Alexis Morvan,
Larry Chen,
Jeffrey M. Larson,
David I. Santiago,
Irfan Siddiqi
Abstract:
Fixed-frequency superconducting quantum processors are one of the most mature quantum computing architectures with high-coherence qubits and simple controls. However, high-fidelity multi-qubit gates pose tight requirements on individual qubit frequencies in these processors , and these constraints are difficult to satisfy when constructing larger processors due to the large dispersion in the fabri…
▽ More
Fixed-frequency superconducting quantum processors are one of the most mature quantum computing architectures with high-coherence qubits and simple controls. However, high-fidelity multi-qubit gates pose tight requirements on individual qubit frequencies in these processors , and these constraints are difficult to satisfy when constructing larger processors due to the large dispersion in the fabrication of Josephson junctions. In this article, we propose a mixed-integer-programming-based optimization approach that determines qubit frequencies to maximize the fabrication yield of quantum processors. We study traditional qubit and qutrit (three-level) architectures with cross-resonance interaction processors. We compare these architectures to a differential AC-Stark shift based on entanglement gates and show that our approach greatly improves the fabrication yield and also increases the scalability of these devices. Our approach is general and can be adapted to problems where one must avoid specific frequency collisions.
△ Less
Submitted 22 March, 2022; v1 submitted 2 December, 2021;
originally announced December 2021.
-
Microscopic Theory of Magnetic Disorder-Induced Decoherence in Superconducting Nb Films
Authors:
Evan Sheridan,
Thomas F. Harrelson,
Eric Sivonxay,
Kristin A. Persson,
M. Virginia P. Altoé,
Irfan Siddiqi,
D. Frank Ogletree,
David I. Santiago,
Sinéad M. Griffin
Abstract:
The performance of superconducting qubits is orders of magnitude below what is expected from theoretical estimates based on the loss tangents of the constituent bulk materials. This has been attributed to the presence of uncontrolled surface oxides formed during fabrication which can introduce defects and impurities that create decoherence channels. Here, we develop an ab initio Shiba theory to in…
▽ More
The performance of superconducting qubits is orders of magnitude below what is expected from theoretical estimates based on the loss tangents of the constituent bulk materials. This has been attributed to the presence of uncontrolled surface oxides formed during fabrication which can introduce defects and impurities that create decoherence channels. Here, we develop an ab initio Shiba theory to investigate the microscopic origin of magnetic-induced decoherence in niobium thin film superconductors and the formation of native oxides. Our ab initio calculations encompass the roles of structural disorder, stoichiometry, and strain on the formation of decoherence-inducing local spin moments. With parameters derived from these first-principles calculations we develop an effective quasi-classical model of magnetic-induced losses in the superconductor. We identify d-channel losses (associated with oxygen vacancies) as especially parasitic, resulting in a residual zero temperature surface impedance. This work provides a route to connecting atomic scale properties of superconducting materials and macroscopic decoherence channels affecting quantum systems.
△ Less
Submitted 23 November, 2021;
originally announced November 2021.
-
Elucidating the local atomic and electronic structure of amorphous oxidized superconducting niobium films
Authors:
Thomas F. Harrelson,
Evan Sheridan,
Ellis Kennedy,
John Vinson,
Alpha T. N'Diaye,
M. Virginia P. Altoé,
Adam Schwartzberg,
Irfan Siddiqi,
D. Frank Ogletree,
Mary C. Scott,
Sinéad M. Griffin
Abstract:
Qubits made from superconducting materials are a mature platform for quantum information science application such as quantum computing. However, materials-based losses are now a limiting factor in reaching the coherence times needed for applications. In particular, knowledge of the atomistic structure and properties of the circuit materials is needed to identify, understand, and mitigate materials…
▽ More
Qubits made from superconducting materials are a mature platform for quantum information science application such as quantum computing. However, materials-based losses are now a limiting factor in reaching the coherence times needed for applications. In particular, knowledge of the atomistic structure and properties of the circuit materials is needed to identify, understand, and mitigate materials-based decoherence channels. In this work we characterize the atomic structure of the native oxide film formed on Nb resonators by comparing fluctuation electron microscopy experiments to density functional theory calculations, finding that an amorphous layer consistent with an Nb$_2$O$_5$ stoichiometry. Comparing X-ray absorption measurements at the Oxygen K edge with first-principles calculations, we find evidence of d-type magnetic impurities in our sample, known to cause impedance in proximal superconductors. This work identifies the structural and chemical composition of the oxide layer grown on Nb superconductors, and shows that soft X-ray absorption can fingerprint magnetic impurities in these superconducting systems.
△ Less
Submitted 22 November, 2021;
originally announced November 2021.
-
Optimized fermionic SWAP networks with equivalent circuit averaging for QAOA
Authors:
Akel Hashim,
Rich Rines,
Victory Omole,
Ravi K. Naik,
John Mark Kreikebaum,
David I. Santiago,
Frederic T. Chong,
Irfan Siddiqi,
Pranav Gokhale
Abstract:
The fermionic SWAP network is a qubit routing sequence that can be used to efficiently execute the Quantum Approximate Optimization Algorithm (QAOA). Even with a minimally-connected topology on an n-qubit processor, this routing sequence enables O(n^2) operations to execute in O(n) steps. In this work, we optimize the execution of fermionic SWAP networks for QAOA through two techniques. First, we…
▽ More
The fermionic SWAP network is a qubit routing sequence that can be used to efficiently execute the Quantum Approximate Optimization Algorithm (QAOA). Even with a minimally-connected topology on an n-qubit processor, this routing sequence enables O(n^2) operations to execute in O(n) steps. In this work, we optimize the execution of fermionic SWAP networks for QAOA through two techniques. First, we take advantage of an overcomplete set of native hardware operations [including 150 ns controlled-pi/2 phase gates with up to 99.67(1)% fidelity] in order to decompose the relevant quantum gates and SWAP networks in a manner which minimizes circuit depth and maximizes gate cancellation. Second, we introduce Equivalent Circuit Averaging, which randomizes over degrees of freedom in the quantum circuit compilation to reduce the impact of systematic coherent errors. Our techniques are experimentally validated on the Advanced Quantum Testbed through the execution of QAOA circuits for finding the ground state of two- and four-node Sherrington-Kirkpatrick spin-glass models with various randomly sampled parameters. We observe a ~60% average reduction in error (total variation distance) for QAOA of depth p = 1 on four transmon qubits on a superconducting quantum processor.
△ Less
Submitted 11 November, 2021; v1 submitted 8 November, 2021;
originally announced November 2021.
-
Machine Learning for Continuous Quantum Error Correction on Superconducting Qubits
Authors:
Ian Convy,
Haoran Liao,
Song Zhang,
Sahil Patel,
William P. Livingston,
Ho Nam Nguyen,
Irfan Siddiqi,
K. Birgitta Whaley
Abstract:
Continuous quantum error correction has been found to have certain advantages over discrete quantum error correction, such as a reduction in hardware resources and the elimination of error mechanisms introduced by having entangling gates and ancilla qubits. We propose a machine learning algorithm for continuous quantum error correction that is based on the use of a recurrent neural network to iden…
▽ More
Continuous quantum error correction has been found to have certain advantages over discrete quantum error correction, such as a reduction in hardware resources and the elimination of error mechanisms introduced by having entangling gates and ancilla qubits. We propose a machine learning algorithm for continuous quantum error correction that is based on the use of a recurrent neural network to identify bit-flip errors from continuous noisy syndrome measurements. The algorithm is designed to operate on measurement signals deviating from the ideal behavior in which the mean value corresponds to a code syndrome value and the measurement has white noise. We analyze continuous measurements taken from a superconducting architecture using three transmon qubits to identify three significant practical examples of non-ideal behavior, namely auto-correlation at temporal short lags, transient syndrome dynamics after each bit-flip, and drift in the steady-state syndrome values over the course of many experiments. Based on these real-world imperfections, we generate synthetic measurement signals from which to train the recurrent neural network, and then test its proficiency when implementing active error correction, comparing this with a traditional double threshold scheme and a discrete Bayesian classifier. The results show that our machine learning protocol is able to outperform the double threshold protocol across all tests, achieving a final state fidelity comparable to the discrete Bayesian classifier.
△ Less
Submitted 5 July, 2022; v1 submitted 20 October, 2021;
originally announced October 2021.
-
Monitoring fast superconducting qubit dynamics using a neural network
Authors:
G. Koolstra,
N. Stevenson,
S. Barzili,
L. Burns,
K. Siva,
S. Greenfield,
W. Livingston,
A. Hashim,
R. K. Naik,
J. M. Kreikebaum,
K. P. O'Brien,
D. I. Santiago,
J. Dressel,
I. Siddiqi
Abstract:
Weak measurements of a superconducting qubit produce noisy voltage signals that are weakly correlated with the qubit state. To recover individual quantum trajectories from these noisy signals, traditional methods require slow qubit dynamics and substantial prior information in the form of calibration experiments. Monitoring rapid qubit dynamics, e.g. during quantum gates, requires more complicated…
▽ More
Weak measurements of a superconducting qubit produce noisy voltage signals that are weakly correlated with the qubit state. To recover individual quantum trajectories from these noisy signals, traditional methods require slow qubit dynamics and substantial prior information in the form of calibration experiments. Monitoring rapid qubit dynamics, e.g. during quantum gates, requires more complicated methods with increased demand for prior information. Here, we experimentally demonstrate an alternative method for accurately tracking rapidly driven superconducting qubit trajectories that uses a Long-Short Term Memory (LSTM) artificial neural network with minimal prior information. Despite few training assumptions, the LSTM produces trajectories that include qubit-readout resonator correlations due to a finite detection bandwidth. In addition to revealing rotated measurement eigenstates and a reduced measurement rate in agreement with theory for a fixed drive, the trained LSTM also correctly reconstructs evolution for an unknown drive with rapid modulation. Our work enables new applications of weak measurements with faster or initially unknown qubit dynamics, such as the diagnosis of coherent errors in quantum gates.
△ Less
Submitted 21 April, 2022; v1 submitted 26 August, 2021;
originally announced August 2021.
-
High-fidelity three-qubit iToffoli gate for fixed-frequency superconducting qubits
Authors:
Yosep Kim,
Alexis Morvan,
Long B. Nguyen,
Ravi K. Naik,
Christian Jünger,
Larry Chen,
John Mark Kreikebaum,
David I. Santiago,
Irfan Siddiqi
Abstract:
The development of noisy intermediate-scale quantum (NISQ) devices has extended the scope of executable quantum circuits with high-fidelity single- and two-qubit gates. Equip** NISQ devices with three-qubit gates will enable the realization of more complex quantum algorithms and efficient quantum error correction protocols with reduced circuit depth. Several three-qubit gates have been implement…
▽ More
The development of noisy intermediate-scale quantum (NISQ) devices has extended the scope of executable quantum circuits with high-fidelity single- and two-qubit gates. Equip** NISQ devices with three-qubit gates will enable the realization of more complex quantum algorithms and efficient quantum error correction protocols with reduced circuit depth. Several three-qubit gates have been implemented for superconducting qubits, but their use in gate synthesis has been limited due to their low fidelity. Here, using fixed-frequency superconducting qubits, we demonstrate a high-fidelity iToffoli gate based on two-qubit interactions, the so-called cross-resonance effect. As with the Toffoli gate, this three-qubit gate can be used to perform universal quantum computation. The iToffoli gate is implemented by simultaneously applying microwave pulses to a linear chain of three qubits, revealing a process fidelity as high as 98.26(2)%. Moreover, we numerically show that our gate scheme can produce additional three-qubit gates which provide more efficient gate synthesis than the Toffoli and iToffoli gates. Our work not only brings a high-fidelity iToffoli gate to current superconducting quantum processors but also opens a pathway for develo** multi-qubit gates based on two-qubit interactions.
△ Less
Submitted 29 June, 2023; v1 submitted 23 August, 2021;
originally announced August 2021.
-
Experimental demonstration of continuous quantum error correction
Authors:
William P. Livingston,
Machiel S. Blok,
Emmanuel Flurin,
Justin Dressel,
Andrew N. Jordan,
Irfan Siddiqi
Abstract:
The storage and processing of quantum information are susceptible to external noise, resulting in computational errors that are inherently continuous A powerful method to suppress these effects is to use quantum error correction. Typically, quantum error correction is executed in discrete rounds where errors are digitized and detected by projective multi-qubit parity measurements. These stabilizer…
▽ More
The storage and processing of quantum information are susceptible to external noise, resulting in computational errors that are inherently continuous A powerful method to suppress these effects is to use quantum error correction. Typically, quantum error correction is executed in discrete rounds where errors are digitized and detected by projective multi-qubit parity measurements. These stabilizer measurements are traditionally realized with entangling gates and projective measurement on ancillary qubits to complete a round of error correction. However, their gate structure makes them vulnerable to errors occurring at specific times in the code and errors on the ancilla qubits. Here we use direct parity measurements to implement a continuous quantum bit-flip correction code in a resource-efficient manner, eliminating entangling gates, ancilla qubits, and their associated errors. The continuous measurements are monitored by an FPGA controller that actively corrects errors as they are detected. Using this method, we achieve an average bit-flip detection efficiency of up to 91%. Furthermore, we use the protocol to increase the relaxation time of the protected logical qubit by a factor of 2.7 over the relaxation times of the bare comprising qubits. Our results showcase resource-efficient stabilizer measurements in a multi-qubit architecture and demonstrate how continuous error correction codes can address challenges in realizing a fault-tolerant system.
△ Less
Submitted 23 July, 2021;
originally announced July 2021.
-
Quantum-tailored machine-learning characterization of a superconducting qubit
Authors:
Élie Genois,
Jonathan A. Gross,
Agustin Di Paolo,
Noah J. Stevenson,
Gerwin Koolstra,
Akel Hashim,
Irfan Siddiqi,
Alexandre Blais
Abstract:
Machine learning (ML) is a promising approach for performing challenging quantum-information tasks such as device characterization, calibration and control. ML models can train directly on the data produced by a quantum device while remaining agnostic to the quantum nature of the learning task. However, these generic models lack physical interpretability and usually require large datasets in order…
▽ More
Machine learning (ML) is a promising approach for performing challenging quantum-information tasks such as device characterization, calibration and control. ML models can train directly on the data produced by a quantum device while remaining agnostic to the quantum nature of the learning task. However, these generic models lack physical interpretability and usually require large datasets in order to learn accurately. Here we incorporate features of quantum mechanics in the design of our ML approach to characterize the dynamics of a quantum device and learn device parameters. This physics-inspired approach outperforms physics-agnostic recurrent neural networks trained on numerically generated and experimental data obtained from continuous weak measurement of a driven superconducting transmon qubit. This demonstration shows how leveraging domain knowledge improves the accuracy and efficiency of this characterization task, thus laying the groundwork for more scalable characterization techniques.
△ Less
Submitted 24 June, 2021;
originally announced June 2021.
-
Hardware-Efficient Microwave-Activated Tunable Coupling Between Superconducting Qubits
Authors:
Bradley K. Mitchell,
Ravi K. Naik,
Alexis Morvan,
Akel Hashim,
John Mark Kreikebaum,
Brian Marinelli,
Wim Lavrijsen,
Kasra Nowrouzi,
David I. Santiago,
Irfan Siddiqi
Abstract:
Generating high-fidelity, tunable entanglement between qubits is crucial for realizing gate-based quantum computation. In superconducting circuits, tunable interactions are often implemented using flux-tunable qubits or coupling elements, adding control complexity and noise sources. Here, we realize a tunable $ZZ$ interaction between two transmon qubits with fixed frequencies and fixed coupling, i…
▽ More
Generating high-fidelity, tunable entanglement between qubits is crucial for realizing gate-based quantum computation. In superconducting circuits, tunable interactions are often implemented using flux-tunable qubits or coupling elements, adding control complexity and noise sources. Here, we realize a tunable $ZZ$ interaction between two transmon qubits with fixed frequencies and fixed coupling, induced by driving both transmons off-resonantly. We show tunable coupling over one order of magnitude larger than the static coupling, and change the sign of the interaction, enabling cancellation of the idle coupling. Further, this interaction is amenable to large quantum processors: the drive frequency can be flexibly chosen to avoid spurious transitions, and because both transmons are driven, it is resilient to microwave crosstalk. We apply this interaction to implement a controlled phase (CZ) gate with a gate fidelity of $99.43(1)\%$ as measured by cycle benchmarking, and we find the fidelity is limited by incoherent errors.
△ Less
Submitted 11 May, 2021;
originally announced May 2021.
-
Continuous measurement of a qudit using dispersively coupled radiation
Authors:
John Steinmetz,
Debmalya Das,
Irfan Siddiqi,
Andrew N. Jordan
Abstract:
We analyze the continuous monitoring of a qudit coupled to a cavity using both phase-preserving and phase-sensitive amplification. The quantum trajectories of the system are described by a stochastic master equation, for which we derive the appropriate Lindblad operators. The measurement back-action causes spiraling in the state coordinates during collapse, which increases as the system levels bec…
▽ More
We analyze the continuous monitoring of a qudit coupled to a cavity using both phase-preserving and phase-sensitive amplification. The quantum trajectories of the system are described by a stochastic master equation, for which we derive the appropriate Lindblad operators. The measurement back-action causes spiraling in the state coordinates during collapse, which increases as the system levels become less distinguishable. We discuss two examples: a two-level system and an $N$-dimensional system and meter with rotational symmetry in the quadrature space. We also provide a comparison of the effects of phase-preserving and phase-sensitive detection on the master equation, and show that the average behavior is the same in both cases, but individual trajectories collapse at different rates depending on the measurement axis in the quadrature plane.
△ Less
Submitted 4 June, 2022; v1 submitted 3 May, 2021;
originally announced May 2021.
-
Automatic Qubit Characterization and Gate Optimization with QubiC
Authors:
Yilun Xu,
Gang Huang,
Jan Balewski,
Ravi K. Naik,
Alexis Morvan,
Brad Mitchell,
Kasra Nowrouzi,
David I. Santiago,
Irfan Siddiqi
Abstract:
As the size and complexity of a quantum computer increases, quantum bit (qubit) characterization and gate optimization become complex and time-consuming tasks. Current calibration techniques require complicated and verbose measurements to tune up qubits and gates, which cannot easily expand to the large-scale quantum systems. We develop a concise and automatic calibration protocol to characterize…
▽ More
As the size and complexity of a quantum computer increases, quantum bit (qubit) characterization and gate optimization become complex and time-consuming tasks. Current calibration techniques require complicated and verbose measurements to tune up qubits and gates, which cannot easily expand to the large-scale quantum systems. We develop a concise and automatic calibration protocol to characterize qubits and optimize gates using QubiC, which is an open source FPGA (field-programmable gate array) based control and measurement system for superconducting quantum information processors. We propose mutli-dimensional loss-based optimization of single-qubit gates and full XY-plane measurement method for the two-qubit CNOT gate calibration. We demonstrate the QubiC automatic calibration protocols are capable of delivering high-fidelity gates on the state-of-the-art transmon-type processor operating at the Advanced Quantum Testbed at Lawrence Berkeley National Laboratory. The single-qubit and two-qubit Clifford gate infidelities measured by randomized benchmarking are of $4.9(1.1) \times 10^{-4}$ and $1.4(3) \times 10^{-2}$, respectively.
△ Less
Submitted 30 April, 2021; v1 submitted 22 April, 2021;
originally announced April 2021.
-
Leveraging Randomized Compiling for the QITE Algorithm
Authors:
Jean-Loup Ville,
Alexis Morvan,
Akel Hashim,
Ravi K. Naik,
Marie Lu,
Bradley Mitchell,
John-Mark Kreikebaum,
Kevin P. O'Brien,
Joel J. Wallman,
Ian Hincks,
Joseph Emerson,
Ethan Smith,
Ed Younis,
Costin Iancu,
David I. Santiago,
Irfan Siddiqi
Abstract:
The success of the current generation of Noisy Intermediate-Scale Quantum (NISQ) hardware shows that quantum hardware may be able to tackle complex problems even without error correction. One outstanding issue is that of coherent errors arising from the increased complexity of these devices. These errors can accumulate through a circuit, making their impact on algorithms hard to predict and mitiga…
▽ More
The success of the current generation of Noisy Intermediate-Scale Quantum (NISQ) hardware shows that quantum hardware may be able to tackle complex problems even without error correction. One outstanding issue is that of coherent errors arising from the increased complexity of these devices. These errors can accumulate through a circuit, making their impact on algorithms hard to predict and mitigate. Iterative algorithms like Quantum Imaginary Time Evolution are susceptible to these errors. This article presents the combination of both noise tailoring using Randomized Compiling and error mitigation with a purification. We also show that Cycle Benchmarking gives an estimate of the reliability of the purification. We apply this method to the Quantum Imaginary Time Evolution of a Transverse Field Ising Model and report an energy estimation and a ground state infidelity both below 1\%. Our methodology is general and can be used for other algorithms and platforms. We show how combining noise tailoring and error mitigation will push forward the performance of NISQ devices.
△ Less
Submitted 26 October, 2021; v1 submitted 18 April, 2021;
originally announced April 2021.
-
Random-access quantum memory using chirped pulse phase encoding
Authors:
James O'Sullivan,
Oscar W. Kennedy,
Kamanasish Debnath,
Joseph Alexander,
Christoph W. Zollitsch,
Mantas Šimėnas,
Akel Hashim,
Christopher N. Thomas,
Stafford Withington,
Irfan Siddiqi,
Klaus Mølmer,
John J. L. Morton
Abstract:
As in conventional computing, key attributes of quantum memories are high storage density and, crucially, random access, or the ability to read from or write to an arbitrarily chosen register. However, achieving such random access with quantum memories in a dense, hardware-efficient manner remains a challenge, for example requiring dedicated cavities per qubit or pulsed field gradients. Here we in…
▽ More
As in conventional computing, key attributes of quantum memories are high storage density and, crucially, random access, or the ability to read from or write to an arbitrarily chosen register. However, achieving such random access with quantum memories in a dense, hardware-efficient manner remains a challenge, for example requiring dedicated cavities per qubit or pulsed field gradients. Here we introduce a protocol using chirped pulses to encode qubits within an ensemble of quantum two-level systems, offering both random access and naturally supporting dynamical decoupling to enhance the memory lifetime. We demonstrate the protocol in the microwave regime using donor spins in silicon coupled to a superconducting cavity, storing up to four multi-photon microwave pulses in distinct memory modes and retrieving them on-demand up to 2~ms later. A further advantage is the natural suppression of superradiant echo emission, which we show is critical when approaching unit cooperativity. This approach offers the potential for microwave random access quantum memories with lifetimes exceeding seconds, while the chirped pulse phase encoding could also be applied in the optical regime to enhance quantum repeaters and networks.
△ Less
Submitted 2 June, 2022; v1 submitted 22 March, 2021;
originally announced March 2021.
-
Experimental Characterization of Crosstalk Errors with Simultaneous Gate Set Tomography
Authors:
Kenneth Rudinger,
Craig W. Hogle,
Ravi K. Naik,
Akel Hashim,
Daniel Lobser,
David I. Santiago,
Matthew D. Grace,
Erik Nielsen,
Timothy Proctor,
Stefan Seritan,
Susan M. Clark,
Robin Blume-Kohout,
Irfan Siddiqi,
Kevin C. Young
Abstract:
Crosstalk is a leading source of failure in multiqubit quantum information processors. It can arise from a wide range of disparate physical phenomena, and can introduce subtle correlations in the errors experienced by a device. Several hardware characterization protocols are able to detect the presence of crosstalk, but few provide sufficient information to distinguish various crosstalk errors fro…
▽ More
Crosstalk is a leading source of failure in multiqubit quantum information processors. It can arise from a wide range of disparate physical phenomena, and can introduce subtle correlations in the errors experienced by a device. Several hardware characterization protocols are able to detect the presence of crosstalk, but few provide sufficient information to distinguish various crosstalk errors from one another. In this article we describe how gate set tomography, a protocol for detailed characterization of quantum operations, can be used to identify and characterize crosstalk errors in quantum information processors. We demonstrate our methods on a two-qubit trapped-ion processor and a two-qubit subsystem of a superconducting transmon processor.
△ Less
Submitted 17 March, 2021;
originally announced March 2021.
-
QubiC: An open source FPGA-based control and measurement system for superconducting quantum information processors
Authors:
Yilun Xu,
Gang Huang,
Jan Balewski,
Ravi Naik,
Alexis Morvan,
Bradley Mitchell,
Kasra Nowrouzi,
David I. Santiago,
Irfan Siddiqi
Abstract:
As quantum information processors grow in quantum bit (qubit) count and functionality, the control and measurement system becomes a limiting factor to large scale extensibility. To tackle this challenge and keep pace with rapidly evolving classical control requirements, full control stack access is essential to system level optimization. We design a modular FPGA (field-programmable gate array) bas…
▽ More
As quantum information processors grow in quantum bit (qubit) count and functionality, the control and measurement system becomes a limiting factor to large scale extensibility. To tackle this challenge and keep pace with rapidly evolving classical control requirements, full control stack access is essential to system level optimization. We design a modular FPGA (field-programmable gate array) based system called QubiC to control and measure a superconducting quantum processing unit. The system includes room temperature electronics hardware, FPGA gateware, and engineering software. A prototype hardware module is assembled from several commercial off-the-shelf evaluation boards and in-house developed circuit boards. Gateware and software are designed to implement basic qubit control and measurement protocols. System functionality and performance are demonstrated by performing qubit chip characterization, gate optimization, and randomized benchmarking sequences on a superconducting quantum processor operating at the Advanced Quantum Testbed at Lawrence Berkeley National Laboratory. The single-qubit and two-qubit process fidelities are measured to be 0.9980$\pm$0.0001 and 0.948$\pm$0.004 by randomized benchmarking. With fast circuit sequence loading capability, the QubiC performs randomized compiling experiments efficiently and improves the feasibility of executing more complex algorithms.
△ Less
Submitted 27 October, 2021; v1 submitted 31 December, 2020;
originally announced January 2021.
-
Radio frequency mixing modules for superconducting qubit room temperature control systems
Authors:
Yilun Xu,
Gang Huang,
David I. Santiago,
Irfan Siddiqi
Abstract:
As the number of qubits in nascent quantum processing units increases, the connectorized RF (radio frequency) analog circuits used in first generation experiments become exceedingly complex. The physical size, cost and electrical failure rate all become limiting factors in the extensibility of control systems. We have developed a series of compact RF mixing boards to address this challenge by inte…
▽ More
As the number of qubits in nascent quantum processing units increases, the connectorized RF (radio frequency) analog circuits used in first generation experiments become exceedingly complex. The physical size, cost and electrical failure rate all become limiting factors in the extensibility of control systems. We have developed a series of compact RF mixing boards to address this challenge by integrating I/Q quadrature mixing, IF(intermediate frequency)/LO(local oscillator)/RF power level adjustments, and DC (direct current) bias fine tuning on a 40 mm $\times $ 80 mm 4-layer PCB (printed circuit board) board with EMI (electromagnetic interference) shielding. The RF mixing module is designed to work with RF and LO frequencies between 2.5 and 8.5 GHz. The typical image rejection and adjacent channel isolation are measured to be $\sim$27 dBc and $\sim$50 dB. By scanning the drive phase in a loopback test, the module short-term amplitude and phase linearity are typically measured to be 5$\times$10$^{-4}$ (V$_{\mathrm{pp}}$/V$_{\mathrm{mean}}$) and 1$\times$10$^{-3}$ radian (pk-pk). The operation of RF mixing board was validated by integrating it into the room temperature control system of a superconducting quantum processor and executing randomized benchmarking characterization of single and two qubit gates. We measured a single-qubit process infidelity of $9.3(3) \times 10^{-4}$ and a two-qubit process infidelity of $2.7(1) \times 10^{-2}$.
△ Less
Submitted 22 July, 2021; v1 submitted 31 December, 2020;
originally announced January 2021.
-
Localization and reduction of superconducting quantum coherent circuit losses
Authors:
M. Virginia P. Altoé,
Archan Banerjee,
Cassidy Berk,
Ahmed Hajr,
Adam Schwartzberg,
Chengyu Song,
Mohammed Al Ghadeer,
Shaul Aloni,
Michael J. Elowson,
John Mark Kreikebaum,
Ed K. Wong,
Sinead Griffin,
Saleem Rao,
Alexander Weber-Bargioni,
Andrew M. Minor,
David I. Santiago,
Stefano Cabrini,
Irfan Siddiqi,
D. Frank Ogletree
Abstract:
Quantum sensing and computation can be realized with superconducting microwave circuits. Qubits are engineered quantum systems of capacitors and inductors with non-linear Josephson junctions. They operate in the single-excitation quantum regime, photons of $27 μ$eV at 6.5 GHz. Quantum coherence is fundamentally limited by materials defects, in particular atomic-scale parasitic two-level systems (T…
▽ More
Quantum sensing and computation can be realized with superconducting microwave circuits. Qubits are engineered quantum systems of capacitors and inductors with non-linear Josephson junctions. They operate in the single-excitation quantum regime, photons of $27 μ$eV at 6.5 GHz. Quantum coherence is fundamentally limited by materials defects, in particular atomic-scale parasitic two-level systems (TLS) in amorphous dielectrics at circuit interfaces.[1] The electric fields driving oscillating charges in quantum circuits resonantly couple to TLS, producing phase noise and dissipation. We use coplanar niobium-on-silicon superconducting resonators to probe decoherence in quantum circuits. By selectively modifying interface dielectrics, we show that most TLS losses come from the silicon surface oxide, and most non-TLS losses are distributed throughout the niobium surface oxide. Through post-fabrication interface modification we reduced TLS losses by 85% and non-TLS losses by 72%, obtaining record single-photon resonator quality factors above 5 million and approaching a regime where non-TLS losses are dominant.
[1]Müller, C., Cole, J. H. & Lisenfeld, J. Towards understanding two-level-systems in amorphous solids: insights from quantum circuits. Rep. Prog. Phys. 82, 124501 (2019)
△ Less
Submitted 14 December, 2020;
originally announced December 2020.
-
Randomized compiling for scalable quantum computing on a noisy superconducting quantum processor
Authors:
Akel Hashim,
Ravi K. Naik,
Alexis Morvan,
Jean-Loup Ville,
Bradley Mitchell,
John Mark Kreikebaum,
Marc Davis,
Ethan Smith,
Costin Iancu,
Kevin P. O'Brien,
Ian Hincks,
Joel J. Wallman,
Joseph Emerson,
Irfan Siddiqi
Abstract:
The successful implementation of algorithms on quantum processors relies on the accurate control of quantum bits (qubits) to perform logic gate operations. In this era of noisy intermediate-scale quantum (NISQ) computing, systematic miscalibrations, drift, and crosstalk in the control of qubits can lead to a coherent form of error which has no classical analog. Coherent errors severely limit the p…
▽ More
The successful implementation of algorithms on quantum processors relies on the accurate control of quantum bits (qubits) to perform logic gate operations. In this era of noisy intermediate-scale quantum (NISQ) computing, systematic miscalibrations, drift, and crosstalk in the control of qubits can lead to a coherent form of error which has no classical analog. Coherent errors severely limit the performance of quantum algorithms in an unpredictable manner, and mitigating their impact is necessary for realizing reliable quantum computations. Moreover, the average error rates measured by randomized benchmarking and related protocols are not sensitive to the full impact of coherent errors, and therefore do not reliably predict the global performance of quantum algorithms, leaving us unprepared to validate the accuracy of future large-scale quantum computations. Randomized compiling is a protocol designed to overcome these performance limitations by converting coherent errors into stochastic noise, dramatically reducing unpredictable errors in quantum algorithms and enabling accurate predictions of algorithmic performance from error rates measured via cycle benchmarking. In this work, we demonstrate significant performance gains under randomized compiling for the four-qubit quantum Fourier transform algorithm and for random circuits of variable depth on a superconducting quantum processor. Additionally, we accurately predict algorithm performance using experimentally-measured error rates. Our results demonstrate that randomized compiling can be utilized to leverage and predict the capabilities of modern-day noisy quantum processors, paving the way forward for scalable quantum computing.
△ Less
Submitted 11 May, 2021; v1 submitted 1 October, 2020;
originally announced October 2020.
-
Axion Dark Matter eXperiment: Detailed Design and Operations
Authors:
R. Khatiwada,
D. Bowring,
A. S. Chou,
A. Sonnenschein,
W. Wester,
D. V. Mitchell,
T. Braine,
C. Bartram,
R. Cervantes,
N. Crisosto,
N. Du,
S. Kimes,
L. J Rosenberg,
G. Rybka,
J. Yang,
D. Will,
G. Carosi,
N. Woollett,
S. Durham,
L. D. Duffy,
R. Bradley,
C. Boutan,
M. Jones,
B. H. LaRoque,
N. S. Oblath
, et al. (26 additional authors not shown)
Abstract:
Axion Dark Matter eXperiment (ADMX) ultra low noise haloscope technology has enabled the successful completion of two science runs (1A and 1B) that looked for dark matter axions in the $2.66$ to $3.1$ $μ$eV mass range with Dine-Fischler-Srednicki-Zhitnisky (DFSZ) sensitivity Ref. [1,2]. Therefore, it is the most sensitive axion search experiment to date in this mass range. We discuss the technolog…
▽ More
Axion Dark Matter eXperiment (ADMX) ultra low noise haloscope technology has enabled the successful completion of two science runs (1A and 1B) that looked for dark matter axions in the $2.66$ to $3.1$ $μ$eV mass range with Dine-Fischler-Srednicki-Zhitnisky (DFSZ) sensitivity Ref. [1,2]. Therefore, it is the most sensitive axion search experiment to date in this mass range. We discuss the technological advances made in the last several years to achieve this sensitivity, which includes the implementation of components, such as state-of-the-art quantum limited amplifiers and a dilution refrigerator. Furthermore, we demonstrate the use of a frequency tunable Microstrip Superconducting Quantum Interference Device (SQUID) Amplifier (MSA), in Run 1A, and a Josephson Parametric Amplifier (JPA), in Run 1B, along with novel analysis tools that characterize the system noise temperature.
△ Less
Submitted 30 September, 2020;
originally announced October 2020.
-
Qutrit randomized benchmarking
Authors:
A. Morvan,
V. V. Ramasesh,
M. S. Blok,
J. M. Kreikebaum,
K. O'Brien,
L. Chen,
B. K. Mitchell,
R. K. Naik,
D. I. Santiago,
I. Siddiqi
Abstract:
Ternary quantum processors offer significant computational advantages over conventional qubit technologies, leveraging the encoding and processing of quantum information in qutrits (three-level systems). To evaluate and compare the performance of such emerging quantum hardware it is essential to have robust benchmarking methods suitable for a higher-dimensional Hilbert space. We demonstrate extens…
▽ More
Ternary quantum processors offer significant computational advantages over conventional qubit technologies, leveraging the encoding and processing of quantum information in qutrits (three-level systems). To evaluate and compare the performance of such emerging quantum hardware it is essential to have robust benchmarking methods suitable for a higher-dimensional Hilbert space. We demonstrate extensions of industry standard Randomized Benchmarking (RB) protocols, developed and used extensively for qubits, suitable for ternary quantum logic. Using a superconducting five-qutrit processor, we find a single-qutrit gate infidelity as low as $2.38 \times 10^{-3}$. Through interleaved RB, we find that this qutrit gate error is largely limited by the native (qubit-like) gate fidelity, and employ simultaneous RB to fully characterize cross-talk errors. Finally, we apply cycle benchmarking to a two-qutrit CSUM gate and obtain a two-qutrit process fidelity of $0.82$. Our results demonstrate a RB-based tool to characterize the obtain overall performance of a qutrit processor, and a general approach to diagnose control errors in future qudit hardware.
△ Less
Submitted 20 August, 2020;
originally announced August 2020.