-
Capacitive crosstalk in gate-based dispersive sensing of spin qubits
Authors:
Eoin G. Kelly,
Alexei Orekhov,
Nico Hendrickx,
Matthias Mergenthaler,
Felix Schupp,
Stephan Paredes,
Rafael S. Eggli,
Andreas V. Kuhlmann,
Patrick Harvey-Collard,
Andreas Fuhrer,
Gian Salis
Abstract:
In gate-based dispersive sensing, the response of a resonator attached to a quantum dot gate is detected by a reflected radio-frequency signal. This enables fast readout of spin qubits and tune up of arrays of quantum dots, but comes at the expense of increased susceptibility to crosstalk, as the resonator can amplify spurious signals and induce fluctuations in the quantum dot potential. We attach…
▽ More
In gate-based dispersive sensing, the response of a resonator attached to a quantum dot gate is detected by a reflected radio-frequency signal. This enables fast readout of spin qubits and tune up of arrays of quantum dots, but comes at the expense of increased susceptibility to crosstalk, as the resonator can amplify spurious signals and induce fluctuations in the quantum dot potential. We attach tank circuits with superconducting NbN inductors and internal quality factors $Q_{\mathrm{i}}$>1000 to the interdot barrier gate of silicon double quantum dot devices. Measuring the interdot transition in transport, we quantify radio-frequency crosstalk that results in a ring-up of the resonator when neighbouring plunger gates are driven with frequency components matching the resonator frequency. This effect complicates qubit operation and scales with the loaded quality factor of the resonator, the mutual capacitance between device gate electrodes, and with the inverse of the parasitic capacitance to ground. Setting qubit frequencies below the resonator frequency is expected to substantially suppress this type of crosstalk.
△ Less
Submitted 19 September, 2023;
originally announced September 2023.
-
Sweet-spot operation of a germanium hole spin qubit with highly anisotropic noise sensitivity
Authors:
N. W. Hendrickx,
L. Massai,
M. Mergenthaler,
F. Schupp,
S. Paredes,
S. W. Bedell,
G. Salis,
A. Fuhrer
Abstract:
Spin qubits defined by valence band hole states comprise an attractive candidate for quantum information processing due to their inherent coupling to electric fields enabling fast and scalable qubit control. In particular, heavy holes in germanium have shown great promise, with recent demonstrations of fast and high-fidelity qubit operations. However, the mechanisms and anisotropies that underlie…
▽ More
Spin qubits defined by valence band hole states comprise an attractive candidate for quantum information processing due to their inherent coupling to electric fields enabling fast and scalable qubit control. In particular, heavy holes in germanium have shown great promise, with recent demonstrations of fast and high-fidelity qubit operations. However, the mechanisms and anisotropies that underlie qubit driving and decoherence are still mostly unclear. Here, we report on the highly anisotropic heavy-hole $g$-tensor and its dependence on electric fields, allowing us to relate both qubit driving and decoherence to an electric modulation of the $g$-tensor. We also confirm the predicted Ising-type hyperfine interaction but show that qubit coherence is ultimately limited by $1/f$ charge noise. Finally, we operate the qubit at low magnetic field and measure a dephasing time of $T_2^*=9.2$ $μ$s, while maintaining a single-qubit gate fidelity of 99.94 %, that remains well above 99 % at an operation temperature T>1 K. This understanding of qubit driving and decoherence mechanisms are key for the design and operation of scalable and highly coherent hole qubit arrays.
△ Less
Submitted 24 November, 2023; v1 submitted 22 May, 2023;
originally announced May 2023.
-
Readout of quantum devices with a sideband microwave interferometer immune to systematic noise
Authors:
N. Crescini,
E. G. Kelly,
G. Salis,
A. Fuhrer
Abstract:
The accuracy of microwave measurements is not only critical for applications in telecommunication and radar, but also for future quantum computers. Qubit technologies such as superconducting qubits or spin qubits require detecting minuscule signals, typically achieved by reflecting a microwave tone off a resonator that is coupled to the qubit. Noise from cabling and amplification, e.g. from temper…
▽ More
The accuracy of microwave measurements is not only critical for applications in telecommunication and radar, but also for future quantum computers. Qubit technologies such as superconducting qubits or spin qubits require detecting minuscule signals, typically achieved by reflecting a microwave tone off a resonator that is coupled to the qubit. Noise from cabling and amplification, e.g. from temperature variations, can be detrimental to readout fidelity. We present an approach to detect phase and amplitude changes of a device under test based on the differential measurement of microwave tones generated by two first-order sidebands of a carrier signal. The two microwave tones are sent through the same cable to the measured device that exhibits a narrow-band response for one sideband and leaves the other unaffected. The reflected sidebands are interfered by down-conversion with the carrier. By choosing amplitude and phases of the sidebands, suppression of either common amplitude or common phase noise can be achieved, allowing for fast, stable measurements of frequency shifts and quality factors of resonators. Test measurements were performed on NbN superconducting resonators at 25 mK to calibrate and characterise the experimental setup, and to study time-dependent fluctuations of their resonance frequency.
△ Less
Submitted 13 March, 2023;
originally announced March 2023.
-
Modular nanomagnet design for spin qubits confined in a linear chain
Authors:
Michele Aldeghi,
Rolf Allenspach,
Gian Salis
Abstract:
On-chip micromagnets enable electrically controlled quantum gates on electron spin qubits. Extending the concept to a large number of qubits is challenging in terms of providing large enough driving gradients and individual addressability. Here we present a design aimed at driving spin qubits arranged in a linear chain and strongly confined in directions lateral to the chain. Nanomagnets are place…
▽ More
On-chip micromagnets enable electrically controlled quantum gates on electron spin qubits. Extending the concept to a large number of qubits is challenging in terms of providing large enough driving gradients and individual addressability. Here we present a design aimed at driving spin qubits arranged in a linear chain and strongly confined in directions lateral to the chain. Nanomagnets are placed laterally to one side of the qubit chain, one nanomagnet per two qubits. The individual magnets are "U"-shaped, such that the magnetic shape anisotropy orients the magnetization alternately towards and against the qubit chain even if an external magnetic field is applied along the qubit chain. The longitudinal and transversal stray field components serve as addressability and driving fields. Using micromagnetic simulations we calculate driving and dephasing rates and the corresponding qubit quality factor. The concept is validated with spin-polarized scanning electron microscopy of Fe nanomagnets fabricated on silicon substrates, finding excellent agreement with micromagnetic simulations. Several features required for a scalable spin qubit design are met in our approach: strong driving and weak dephasing gradients, reduced crosstalk and operation at low external magnetic field.
△ Less
Submitted 22 December, 2022;
originally announced December 2022.
-
Direct implementation of a perceptron in superconducting circuit quantum hardware
Authors:
Marek Pechal,
Federico Roy,
Samuel A. Wilkinson,
Gian Salis,
Max Werninghaus,
Michael J. Hartmann,
Stefan Filipp
Abstract:
The utility of classical neural networks as universal approximators suggests that their quantum analogues could play an important role in quantum generalizations of machine-learning methods. Inspired by the proposal in [Torrontegui and García-Ripoll 2019 EPL 125 30004], we demonstrate a superconducting qubit implementation of an adiabatic controlled gate, which generalizes the action of a classica…
▽ More
The utility of classical neural networks as universal approximators suggests that their quantum analogues could play an important role in quantum generalizations of machine-learning methods. Inspired by the proposal in [Torrontegui and García-Ripoll 2019 EPL 125 30004], we demonstrate a superconducting qubit implementation of an adiabatic controlled gate, which generalizes the action of a classical perceptron as the basic building block of a quantum neural network. We show full control over the steepness of the perceptron activation function, the input weight and the bias by tuning the adiabatic gate length, the coupling between the qubits and the frequency of the applied drive, respectively. In its general form, the gate realizes a multi-qubit entangling operation in a single step, whose decomposition into single- and two-qubit gates would require a number of gates that is exponential in the number of qubits. Its demonstrated direct implementation as perceptron in quantum hardware may therefore lead to more powerful quantum neural networks when combined with suitable additional standard gates.
△ Less
Submitted 24 November, 2021;
originally announced November 2021.
-
Effects of surface treatments on flux tunable transmon qubits
Authors:
M. Mergenthaler,
C. Müller,
M. Ganzhorn,
S. Paredes,
P. Müller,
G. Salis,
V. P. Adiga,
M. Brink,
M. Sandberg,
J. B. Hertzberg,
S. Filipp,
A. Fuhrer
Abstract:
One of the main limitations in state-of-the art solid-state quantum processors are qubit decoherence and relaxation due to noise in their local environment. For the field to advance towards full fault-tolerant quantum computing, a better understanding of the underlying microscopic noise sources is therefore needed. Adsorbates on surfaces, impurities at interfaces and material defects have been ide…
▽ More
One of the main limitations in state-of-the art solid-state quantum processors are qubit decoherence and relaxation due to noise in their local environment. For the field to advance towards full fault-tolerant quantum computing, a better understanding of the underlying microscopic noise sources is therefore needed. Adsorbates on surfaces, impurities at interfaces and material defects have been identified as sources of noise and dissipation in solid-state quantum devices. Here, we use an ultra-high vacuum package to study the impact of vacuum loading, UV-light exposure and ion irradiation treatments on coherence and slow parameter fluctuations of flux tunable superconducting transmon qubits. We analyse the effects of each of these surface treatments by comparing averages over many individual qubits and measurements before and after treatment. The treatments studied do not significantly impact the relaxation rate $Γ_1$ and the echo dephasing rate $Γ_2^\textrm{e}$, except for Ne ion bombardment which reduces $Γ_1$. In contrast, flux noise parameters are improved by removing magnetic adsorbates from the chip surfaces with UV-light and NH$_3$ treatments. Additionally, we demonstrate that SF$_6$ ion bombardment can be used to adjust qubit frequencies in-situ and post fabrication without affecting qubit coherence at the sweet spot.
△ Less
Submitted 14 March, 2021;
originally announced March 2021.
-
Characterization and tomography of a hidden qubit
Authors:
M. Pechal,
G. Salis,
M. Ganzhorn,
D. J. Egger,
M. Werninghaus,
S. Filipp
Abstract:
In circuit-based quantum computing, the available gate set typically consists of single-qubit gates acting on each individual qubit and at least one entangling gate between pairs of qubits. In certain physical architectures, however, some qubits may be 'hidden' and lacking direct addressability through dedicated control and readout lines, for instance because of limited on-chip routing capabilitie…
▽ More
In circuit-based quantum computing, the available gate set typically consists of single-qubit gates acting on each individual qubit and at least one entangling gate between pairs of qubits. In certain physical architectures, however, some qubits may be 'hidden' and lacking direct addressability through dedicated control and readout lines, for instance because of limited on-chip routing capabilities, or because the number of control lines becomes a limiting factor for many-qubit systems. In this case, no single-qubit operations can be applied to the hidden qubits and their state cannot be measured directly. Instead, they may be controlled and read out only via single-qubit operations on connected 'control' qubits and a suitable set of two-qubit gates. We first discuss the impact of such restricted control capabilities on the quantum volume of specific qubit coupling networks. We then experimentally demonstrate full control and measurement capabilities in a superconducting two-qubit device with local single-qubit control and iSWAP and controlled-phase two-qubit interactions enabled by a tunable coupler. We further introduce an iterative tune-up process required to completely characterize the gate set used for quantum process tomography and evaluate the resulting gate fidelities.
△ Less
Submitted 17 November, 2020;
originally announced November 2020.
-
Benchmarking the noise sensitivity of different parametric two-qubit gates in a single superconducting quantum computing platform
Authors:
M. Ganzhorn,
G. Salis,
D. J. Egger,
A. Fuhrer,
M. Mergenthaler,
C. Müller,
P. Müller,
S. Paredes,
M. Pechal,
M. Werninghaus,
S. Filipp
Abstract:
The possibility to utilize different types of two-qubit gates on a single quantum computing platform adds flexibility in the decomposition of quantum algorithms. A larger hardware-native gate set may decrease the number of required gates, provided that all gates are realized with high fidelity. Here, we benchmark both controlled-Z (CZ) and exchange-type (iSWAP) gates using a parametrically driven…
▽ More
The possibility to utilize different types of two-qubit gates on a single quantum computing platform adds flexibility in the decomposition of quantum algorithms. A larger hardware-native gate set may decrease the number of required gates, provided that all gates are realized with high fidelity. Here, we benchmark both controlled-Z (CZ) and exchange-type (iSWAP) gates using a parametrically driven tunable coupler that mediates the interaction between two superconducting qubits. Using randomized benchmarking protocols we estimate an error per gate of $0.9\pm0.03\%$ and $1.3\pm0.4\%$ fidelity for the CZ and the iSWAP gate, respectively. We argue that spurious $ZZ$-type couplings are the dominant error source for the iSWAP gate, and that phase stability of all microwave drives is of utmost importance. Such differences in the achievable fidelities for different two-qubit gates have to be taken into account when map** quantum algorithms to real hardware.
△ Less
Submitted 14 May, 2020; v1 submitted 12 May, 2020;
originally announced May 2020.
-
Time-resolved tomography of a driven adiabatic quantum simulation
Authors:
Gian Salis,
Nikolaj Moll,
Marco Roth,
Marc Ganzhorn,
Stefan Filipp
Abstract:
A typical goal of a quantum simulation is to find the energy levels and eigenstates of a given Hamiltonian. This can be realized by adiabatically varying the system control parameters to steer an initial eigenstate into the eigenstate of the target Hamiltonian. Such an adiabatic quantum simulation is demonstrated by directly implementing a controllable and smoothly varying Hamiltonian in the rotat…
▽ More
A typical goal of a quantum simulation is to find the energy levels and eigenstates of a given Hamiltonian. This can be realized by adiabatically varying the system control parameters to steer an initial eigenstate into the eigenstate of the target Hamiltonian. Such an adiabatic quantum simulation is demonstrated by directly implementing a controllable and smoothly varying Hamiltonian in the rotating frame of two superconducting qubits, including longitudinal and transverse fields and iSWAP-type two-qubit interactions. The evolution of each eigenstate is tracked using time-resolved state tomography. The energy gaps between instantaneous eigenstates are chosen such that depending on the energy transition rate either diabatic or adiabatic passages are observed in the measured energies and correlators. Errors in the obtained energy values induced by finite $T_1$ and $T_2$ times of the qubits are mitigated by extrapolation to short protocol times.
△ Less
Submitted 15 January, 2020;
originally announced January 2020.
-
Short-depth trial-wavefunctions for the variational quantum eigensolver based on the problem Hamiltonian
Authors:
Gian Salis,
Nikolaj Moll
Abstract:
For the variational quantum eigensolver we propose to generate trial wavefunctions from a small amount of selected Pauli terms of the problem Hamiltonian. Two different approaches, one inspired by the quantum approximate optimization algorithm and the other by imaginary-time evolution, are proposed and studied in detail. Using numerical calculations, we study the efficiency of these trial wavefunc…
▽ More
For the variational quantum eigensolver we propose to generate trial wavefunctions from a small amount of selected Pauli terms of the problem Hamiltonian. Two different approaches, one inspired by the quantum approximate optimization algorithm and the other by imaginary-time evolution, are proposed and studied in detail. Using numerical calculations, we study the efficiency of these trial wavefunctions for finding the ground-state energy of three molecules: H2, LiH and H2O. We find that only a small number of Pauli terms are needed to reach chemical accuracy, leading to short-depth quantum circuits with a small number of variational parameters. For the LiH molecule, the quantum circuit consists of 36 two-qubit gates, 45 one-qubit gates, and four variational parameters, with a favorable scaling for larger molecules.
△ Less
Submitted 26 August, 2019;
originally announced August 2019.
-
Gate-efficient simulation of molecular eigenstates on a quantum computer
Authors:
Marc Ganzhorn,
Daniel J. Egger,
Panagiotis Kl. Barkoutsos,
Pauline Ollitrault,
Gian Salis,
Nikolaj Moll,
Andreas Fuhrer,
Peter Mueller,
Stefan Woerner,
Ivano Tavernelli,
Stefan Filipp
Abstract:
A key requirement to perform simulations of large quantum systems on near-term quantum hardware is the design of quantum algorithms with short circuit depth that finish within the available coherence time. A way to stay within the limits of coherence is to reduce the number of gates by implementing a gate set that matches the requirements of the specific algorithm of interest directly in hardware.…
▽ More
A key requirement to perform simulations of large quantum systems on near-term quantum hardware is the design of quantum algorithms with short circuit depth that finish within the available coherence time. A way to stay within the limits of coherence is to reduce the number of gates by implementing a gate set that matches the requirements of the specific algorithm of interest directly in hardware. Here, we show that exchange-type gates are a promising choice for simulating molecular eigenstates on near-term quantum devices since these gates preserve the number of excitations in the system. Complementing the theoretical work by Barkoutsos et al. [PRA 98, 022322 (2018)], we report on the experimental implementation of a variational algorithm on a superconducting qubit platform to compute the eigenstate energies of molecular hydrogen. We utilize a parametrically driven tunable coupler to realize exchange-type gates that are configurable in amplitude and phase on two fixed-frequency superconducting qubits. With gate fidelities around 95% we are able to compute the eigenstates within an accuracy of 50 mHartree on average, a limit set by the coherence time of the tunable coupler.
△ Less
Submitted 13 September, 2018;
originally announced September 2018.
-
Adiabatic quantum simulations with driven superconducting qubits
Authors:
Marco Roth,
Nikolaj Moll,
Gian Salis,
Marc Ganzhorn,
Daniel J. Egger,
Stefan Filipp,
Sebastian Schmidt
Abstract:
We propose a quantum simulator based on driven superconducting qubits where the interactions are generated parametrically by a polychromatic magnetic flux modulation of a tunable bus element. Using a time-dependent Schrieffer-Wolff transformation, we analytically derive a multi-qubit Hamiltonian which features independently tunable $XX$ and $YY$-type interactions as well as local bias fields over…
▽ More
We propose a quantum simulator based on driven superconducting qubits where the interactions are generated parametrically by a polychromatic magnetic flux modulation of a tunable bus element. Using a time-dependent Schrieffer-Wolff transformation, we analytically derive a multi-qubit Hamiltonian which features independently tunable $XX$ and $YY$-type interactions as well as local bias fields over a large parameter range. We demonstrate the adiabatic simulation of the ground state of a hydrogen molecule using two superconducting qubits and one tunable bus element. The time required to reach chemical accuracy lies in the few microsecond range and therefore could be implemented on currently available superconducting circuits. Further applications of this technique may also be found in the simulation of interacting spin systems.
△ Less
Submitted 21 August, 2018; v1 submitted 14 August, 2018;
originally announced August 2018.
-
Quantum algorithms for electronic structure calculations: particle/hole Hamiltonian and optimized wavefunction expansions
Authors:
Panagiotis Kl. Barkoutsos,
Jerome F. Gonthier,
Igor Sokolov,
Nikolaj Moll,
Gian Salis,
Andreas Fuhrer,
Marc Ganzhorn,
Daniel J. Egger,
Matthias Troyer,
Antonio Mezzacapo,
Stefan Filipp,
Ivano Tavernelli
Abstract:
In this work we investigate methods to improve the efficiency and scalability of quantum algorithms for quantum chemistry applications. We propose a transformation of the electronic structure Hamiltonian in the second quantization framework into the particle-hole (p/h) picture, which offers a better starting point for the expansion of the trial wavefunction. The state of the molecular system at st…
▽ More
In this work we investigate methods to improve the efficiency and scalability of quantum algorithms for quantum chemistry applications. We propose a transformation of the electronic structure Hamiltonian in the second quantization framework into the particle-hole (p/h) picture, which offers a better starting point for the expansion of the trial wavefunction. The state of the molecular system at study is parametrized in a way to efficiently explore the sector of the molecular Fock space that contains the desired solution. To this end, we explore several trial wavefunctions to identify the most efficient parameterization of the molecular ground state. Taking advantage of known post-Hartree Fock quantum chemistry approaches and heuristic Hilbert space search quantum algorithms, we propose a new family of quantum circuits based on exchange-type gates that enable accurate calculations while kee** the gate count (i.e., the circuit depth) low. The particle-hole implementation of the Unitary Coupled Cluster (UCC) method within the Variational Quantum Eigensolver approach gives rise to an efficient quantum algorithm, named q-UCC , with important advantages compared to the straightforward 'translation' of the classical Coupled Cluster counterpart. In particular, we show how a single Trotter step can accurately and efficiently reproduce the ground state energies of simple molecular systems.
△ Less
Submitted 11 May, 2018;
originally announced May 2018.
-
Entanglement generation in superconducting qubits using holonomic operations
Authors:
Daniel J. Egger,
Marc Ganzhorn,
Gian Salis,
Andreas Fuhrer,
Peter Mueller,
Panagiotis Kl. Barkoutsos,
Nikolaj Moll,
Ivano Tavernelli,
Stefan Filipp
Abstract:
We investigate a non-adiabatic holonomic operation that enables us to entangle two fixed-frequency superconducting transmon qubits attached to a common bus resonator. Two coherent microwave tones are applied simultaneously to the two qubits and drive transitions between the first excited resonator state and the second excited state of each qubit. The cyclic evolution within this effective 3-level…
▽ More
We investigate a non-adiabatic holonomic operation that enables us to entangle two fixed-frequency superconducting transmon qubits attached to a common bus resonator. Two coherent microwave tones are applied simultaneously to the two qubits and drive transitions between the first excited resonator state and the second excited state of each qubit. The cyclic evolution within this effective 3-level $Λ$-system gives rise to a holonomic operation entangling the two qubits. Two-qubit states with 95\% fidelity, limited mainly by charge-noise of the current device, are created within $213~\rm{ns}$. This scheme is a step toward implementing a SWAP-type gate directly in an all-microwave controlled hardware platform. By extending the available set of two-qubit operations in the fixed-frequency qubit architecture, the proposed scheme may find applications in near-term quantum applications using variational algorithms to efficiently create problem-specific trial states.
△ Less
Submitted 13 April, 2018;
originally announced April 2018.
-
Pulsed reset protocol for fixed-frequency superconducting qubits
Authors:
Daniel J. Egger,
Max Werninghaus,
Marc Ganzhorn,
Gian Salis,
Andreas Fuhrer,
Peter Mueller,
Stefan Filipp
Abstract:
Improving coherence times of quantum bits is a fundamental challenge in the field of quantum computing. With long-lived qubits it becomes, however, inefficient to wait until the qubits have relaxed to their ground state after completion of an experiment. Moreover, for error-correction schemes it is import to rapidly re-initialize ancilla parity-check qubits. We present a simple pulsed qubit reset…
▽ More
Improving coherence times of quantum bits is a fundamental challenge in the field of quantum computing. With long-lived qubits it becomes, however, inefficient to wait until the qubits have relaxed to their ground state after completion of an experiment. Moreover, for error-correction schemes it is import to rapidly re-initialize ancilla parity-check qubits. We present a simple pulsed qubit reset protocol based on a two-pulse sequence. A first pulse transfers the excited state population to a higher excited qubit state and a second pulse into a lossy environment provided by a low-Q transmission line resonator, which is also used for qubit readout. We show that the remaining excited state population can be suppressed to $2.2\pm0.8\%$ and utilize the pulsed reset protocol to carry out experiments at enhanced rates.
△ Less
Submitted 1 April, 2019; v1 submitted 25 February, 2018;
originally announced February 2018.
-
Quantum optimization using variational algorithms on near-term quantum devices
Authors:
Nikolaj Moll,
Panagiotis Barkoutsos,
Lev S. Bishop,
Jerry M. Chow,
Andrew Cross,
Daniel J. Egger,
Stefan Filipp,
Andreas Fuhrer,
Jay M. Gambetta,
Marc Ganzhorn,
Abhinav Kandala,
Antonio Mezzacapo,
Peter Müller,
Walter Riess,
Gian Salis,
John Smolin,
Ivano Tavernelli,
Kristan Temme
Abstract:
Universal fault-tolerant quantum computers will require error-free execution of long sequences of quantum gate operations, which is expected to involve millions of physical qubits. Before the full power of such machines will be available, near-term quantum devices will provide several hundred qubits and limited error correction. Still, there is a realistic prospect to run useful algorithms within…
▽ More
Universal fault-tolerant quantum computers will require error-free execution of long sequences of quantum gate operations, which is expected to involve millions of physical qubits. Before the full power of such machines will be available, near-term quantum devices will provide several hundred qubits and limited error correction. Still, there is a realistic prospect to run useful algorithms within the limited circuit depth of such devices. Particularly promising are optimization algorithms that follow a hybrid approach: the aim is to steer a highly entangled state on a quantum system to a target state that minimizes a cost function via variation of some gate parameters. This variational approach can be used both for classical optimization problems as well as for problems in quantum chemistry. The challenge is to converge to the target state given the limited coherence time and connectivity of the qubits. In this context, the quantum volume as a metric to compare the power of near-term quantum devices is discussed.
With focus on chemistry applications, a general description of variational algorithms is provided and the map** from fermions to qubits is explained. Coupled-cluster and heuristic trial wave-functions are considered for efficiently finding molecular ground states. Furthermore, simple error-mitigation schemes are introduced that could improve the accuracy of determining ground-state energies. Advancing these techniques may lead to near-term demonstrations of useful quantum computation with systems containing several hundred qubits.
△ Less
Submitted 9 October, 2017; v1 submitted 3 October, 2017;
originally announced October 2017.
-
Analysis of parametrically driven exchange-type (iSWAP) and two-photon (bSWAP) interactions between superconducting qubits
Authors:
Marco Roth,
Marc Ganzhorn,
Nikolaj Moll,
Stefan Filipp,
Gian Salis,
Sebastian Schmidt
Abstract:
A current bottleneck for quantum computation is the realization of high-fidelity two-qubit quantum operations between two and more quantum bits in arrays of coupled qubits. Gates based on parametrically driven tunable couplers offer a convenient method to entangle multiple qubits by selectively activating different interaction terms in the effective Hamiltonian. Here, we study theoretically and ex…
▽ More
A current bottleneck for quantum computation is the realization of high-fidelity two-qubit quantum operations between two and more quantum bits in arrays of coupled qubits. Gates based on parametrically driven tunable couplers offer a convenient method to entangle multiple qubits by selectively activating different interaction terms in the effective Hamiltonian. Here, we study theoretically and experimentally a superconducting qubit setup with two transmon qubits connected via a capacitively coupled tunable bus. We develop a time-dependent Schrieffer-Wolff transformation and derive analytic expressions for exchange-interaction gates swap** excitations between the qubits (iSWAP) and for two-photon gates creating and annihilating simultaneous two-qubit excitations (bSWAP). We find that the bSWAP gate is generally slower than the more commonly used iSWAP gate, but features favorable scalability properties with less severe frequency crowding effects, which typically degrade the fidelity in multi-qubit setups. Our theoretical results are backed by experimental measurements as well as exact numerical simulations including the effects of higher transmon levels and dissipation.
△ Less
Submitted 7 August, 2017;
originally announced August 2017.
