-
Creation of color centers in diamond by recoil implantation through dielectric films
Authors:
Yuyang Han,
Christian Pederson,
Bethany E. Matthews,
Nicholas S. Yama,
Maxwell F. Parsons,
Kai-Mei C. Fu
Abstract:
The need of near-surface color centers in diamond for quantum technologies motivates the controlled do** of specific extrinsic impurities into the crystal lattice. Recent experiments have shown that this can be achieved by momentum transfer from a surface precursor via ion implantation, an approach known as ``recoil implantation.'' Here, we extend this technique to incorporate dielectric precurs…
▽ More
The need of near-surface color centers in diamond for quantum technologies motivates the controlled do** of specific extrinsic impurities into the crystal lattice. Recent experiments have shown that this can be achieved by momentum transfer from a surface precursor via ion implantation, an approach known as ``recoil implantation.'' Here, we extend this technique to incorporate dielectric precursors for creating nitrogen-vacancy (NV) and silicon-vacancy (SiV) centers in diamond. Specifically, we demonstrate that gallium focused-ion-beam exposure to a thin layer of silicon nitride or silicon dioxide on the diamond surface results in the introduction of both extrinsic impurities and carbon vacancies. These defects subsequently give rise to near-surface NV and SiV centers with desirable optical properties after annealing.
△ Less
Submitted 28 December, 2023; v1 submitted 19 October, 2023;
originally announced October 2023.
-
Optical tuning of the diamond Fermi level measured by correlated scanning probe microscopy and quantum defect spectroscopy
Authors:
Christian Pederson,
Rajiv Giridharagopal,
Fang Zhao,
Scott T. Dunham,
Yevgeny Raitses,
David S. Ginger,
Kai-Mei C. Fu
Abstract:
Quantum technologies based on quantum point defects in crystals require control over the defect charge state. Here we tune the charge state of shallow nitrogen-vacancy and silicon-vacancy centers by locally oxidizing a hydrogenated surface with moderate optical excitation and simultaneous spectral monitoring. The loss of conductivity and change in work function due to oxidation are measured in atm…
▽ More
Quantum technologies based on quantum point defects in crystals require control over the defect charge state. Here we tune the charge state of shallow nitrogen-vacancy and silicon-vacancy centers by locally oxidizing a hydrogenated surface with moderate optical excitation and simultaneous spectral monitoring. The loss of conductivity and change in work function due to oxidation are measured in atmosphere using conductive atomic force microscopy (C-AFM) and Kelvin probe force microscopy (KPFM). We correlate these scanning probe measurements with optical spectroscopy of the nitrogen-vacancy and silicon-vacancy centers created via implantation and annealing 15-25 nm beneath the diamond surface. The observed charge state of the defects as a function of optical exposure demonstrates that laser oxidation provides a way to precisely tune the Fermi level over a range of at least 2.00 eV. We also observe a significantly larger oxidation rate for implanted surfaces compared to unimplanted surfaces under ambient conditions. Combined with knowledge of the electron affinity of a surface, these results suggest KPFM is a powerful, high-spatial resolution technique to advance surface Fermi level engineering for charge stabilization of quantum defects.
△ Less
Submitted 27 September, 2023;
originally announced September 2023.
-
Hybrid Integration of GaP Photonic Crystal Cavities with Silicon-Vacancy Centers in Diamond by Stamp-Transfer
Authors:
Srivatsa Chakravarthi,
Nicholas S. Yama,
Alex Abulnaga,
Ding Huang,
Christian Pederson,
Karine Hestroffer,
Fariba Hatami,
Nathalie P. de Leon,
Kai-Mei C. Fu
Abstract:
Optically addressable solid-state defects are emerging as one of the most promising qubit platforms for quantum networks. Maximizing photon-defect interaction by nanophotonic cavity coupling is key to network efficiency. We demonstrate fabrication of gallium phosphide 1-D photonic crystal waveguide cavities on a silicon oxide carrier and subsequent integration with implanted silicon-vacancy (SiV)…
▽ More
Optically addressable solid-state defects are emerging as one of the most promising qubit platforms for quantum networks. Maximizing photon-defect interaction by nanophotonic cavity coupling is key to network efficiency. We demonstrate fabrication of gallium phosphide 1-D photonic crystal waveguide cavities on a silicon oxide carrier and subsequent integration with implanted silicon-vacancy (SiV) centers in diamond using a stamp-transfer technique. The stam** process avoids diamond etching and allows fine-tuning of the cavities prior to integration. After transfer to diamond, we measure cavity quality factors ($Q$) of up to 8900 and perform resonant excitation of single SiV centers coupled to these cavities. For a cavity with $Q$ of 4100, we observe a three-fold lifetime reduction on-resonance, corresponding to a maximum potential cooperativity of $C = 2$. These results indicate promise for high photon-defect interaction in a platform which avoids fabrication of the quantum defect host crystal.
△ Less
Submitted 13 December, 2022; v1 submitted 9 December, 2022;
originally announced December 2022.
-
Impact of surface and laser-induced noise on the spectral stability of implanted nitrogen-vacancy centers in diamond
Authors:
Srivatsa Chakravarthi,
Christian Pederson,
Zeeshawn Kazi,
Andrew Ivanov,
Kai-Mei C. Fu
Abstract:
Scalable realizations of quantum network technologies utilizing the nitrogen vacancy center in diamond require creation of optically coherent NV centers in close proximity to a surface for coupling to optical structures. We create single NV centers by $^{15}$N ion implantation and high-temperature vacuum annealing. Origin of the NV centers is established by optically detected magnetic resonance sp…
▽ More
Scalable realizations of quantum network technologies utilizing the nitrogen vacancy center in diamond require creation of optically coherent NV centers in close proximity to a surface for coupling to optical structures. We create single NV centers by $^{15}$N ion implantation and high-temperature vacuum annealing. Origin of the NV centers is established by optically detected magnetic resonance spectroscopy for nitrogen isotope identification. Near lifetime-limited optical linewidths ($<$ 60 MHz) are observed for the majority of the normal-implant (7$^\circ$, $\approx$ 100 nm deep) $^{15}$NV centers. Long-term stability of the NV$^-$ charge state and emission frequency is demonstrated. The effect of NV-surface interaction is investigated by varying the implantation angle for a fixed ion-energy, and thus lattice damage profile. In contrast to the normal implant condition, NVs from an oblique-implant (85$^\circ$, $\approx$ 20 nm deep) exhibit substantially reduced optical coherence. Our results imply that the surface is a larger source of perturbation than implantation damage for shallow implanted NVs. This work supports the viability of ion implantation for formation of optically stable NV centers. However, careful surface preparation will be necessary for scalable defect engineering.
△ Less
Submitted 6 August, 2021; v1 submitted 19 May, 2021;
originally announced May 2021.
-
Inverse-designed photon extractors for optically addressable defect qubits
Authors:
Srivatsa Chakravarthi,
Pengning Chao,
Christian Pederson,
Sean Molesky,
Andrew Ivanov,
Karine Hestroffer,
Fariba Hatami,
Alejandro W. Rodriguez,
Kai-Mei C. Fu
Abstract:
Solid-state defect qubit systems with spin-photon interfaces show great promise for quantum information and metrology applications. Photon collection efficiency, however, presents a major challenge for defect qubits in high refractive index host materials. Inverse-design optimization of photonic devices enables unprecedented flexibility in tailoring critical parameters of a spin-photon interface i…
▽ More
Solid-state defect qubit systems with spin-photon interfaces show great promise for quantum information and metrology applications. Photon collection efficiency, however, presents a major challenge for defect qubits in high refractive index host materials. Inverse-design optimization of photonic devices enables unprecedented flexibility in tailoring critical parameters of a spin-photon interface including spectral response, photon polarization and collection mode. Further, the design process can incorporate additional constraints, such as fabrication tolerance and material processing limitations. Here we design and demonstrate a compact hybrid gallium phosphide on diamond inverse-design planar dielectric structure coupled to single near-surface nitrogen-vacancy centers formed by implantation and annealing. We observe device operation near the theoretical limit and measure up to a 14-fold broadband enhancement in photon extraction efficiency. We expect that such inverse-designed devices will enable realization of scalable arrays of single-photon emitters, rapid characterization of new quantum emitters, sensing and efficient heralded entanglement schemes.
△ Less
Submitted 15 December, 2020; v1 submitted 24 July, 2020;
originally announced July 2020.
-
A window into NV center kinetics via repeated annealing and spatial tracking of thousands of individual NV centers
Authors:
Srivatsa Chakravarthi,
Chris Moore,
April Opsvig,
Christian Pederson,
Emma Hunt,
Andrew Ivanov,
Ian Christen,
Scott Dunham,
Kai-Mei C Fu
Abstract:
Knowledge of the nitrogen-vacancy center formation kinetics in diamond is critical to engineering sensors and quantum information devices based on this defect. Here we utilize the longitudinal tracking of single NV centers to elucidate NV defect kinetics during high-temperature annealing from 800-1100 $^\circ$C in high-purity chemical-vapor-deposition diamond. We observe three phenomena which can…
▽ More
Knowledge of the nitrogen-vacancy center formation kinetics in diamond is critical to engineering sensors and quantum information devices based on this defect. Here we utilize the longitudinal tracking of single NV centers to elucidate NV defect kinetics during high-temperature annealing from 800-1100 $^\circ$C in high-purity chemical-vapor-deposition diamond. We observe three phenomena which can coexist: NV formation, NV quenching, and NV orientation changes. Of relevance to NV-based applications, a 6 to 24-fold enhancement in the NV density, in the absence of sample irradiation, is observed by annealing at 980 $^\circ$C, and NV orientation changes are observed at 1050 $^\circ$C. With respect to the fundamental understanding of defect kinetics in ultra-pure diamond, our results indicate a significant vacancy source can be activated for NV creation between 950-980 $^\circ$C and suggests that native hydrogen from NVH$_y$ complexes plays a dominant role in NV quenching, in agreement with recent {\it ab initio} calculations. Finally, the direct observation of orientation changes allows us to estimate an NV diffusion barrier of 5.1~eV.
△ Less
Submitted 23 November, 2019; v1 submitted 17 July, 2019;
originally announced July 2019.
