-
Approaches of frequency-dependent squeezing for the low frequency detector of Einstein Telescope
Authors:
Xingrui Peng,
Denis Martynov,
Zonghong Zhu,
Teng Zhang
Abstract:
The quantum noise in gravitational-wave detectors can be suppressed in a broadband by frequency-dependent squeezing. It usually requires one large scale filter cavity and even two, for example in the low frequency detector of Einstein Telescope, which is a detuned dual recycling Fabry-Perot Michelson interferometer. In this paper, we study the feasibility of replacing two filter cavities with a co…
▽ More
The quantum noise in gravitational-wave detectors can be suppressed in a broadband by frequency-dependent squeezing. It usually requires one large scale filter cavity and even two, for example in the low frequency detector of Einstein Telescope, which is a detuned dual recycling Fabry-Perot Michelson interferometer. In this paper, we study the feasibility of replacing two filter cavities with a coupled-cavity, aiming to reduce the optical losses with less number of optics. It turns out this approach is only theoretically valid, however, the required parameters of the optics don't support practical implementation, which is consistent with the results in [Phys. Rev. D {\bf 101}, 082002 (2020)]. Furthermore, we investigate the viability of utilizing EPR squeezing to eliminate either one or two filter cavities in Einstein Telescope. It turns out EPR squeezing would allow to eliminate one filter cavity, and can potentially improve the detector sensitivity with the allowance of higher input squeezing level, benefiting from the longer length of the arm cavity which serves as one of the filter cavities for frequency-dependent squeezing.
△ Less
Submitted 23 April, 2024;
originally announced April 2024.
-
A High-Finesse Suspended Interferometric Sensor for Macroscopic Quantum Mechanics with Femtometre Sensitivity
Authors:
Jiri Smetana,
Tianliang Yan,
Vincent Boyer,
Denis Martynov
Abstract:
We present an interferometric sensor for investigating macroscopic quantum mechanics on a table-top scale. The sensor consists of pair of suspended optical cavities with a finesse in excess of 100,000 comprising 10 g fused-silica mirrors. In the current room-temperature operation, we achieve a peak sensitivity of \SI{0.5}{\fmasd} in the acoustic frequency band, limited by the readout noise. With a…
▽ More
We present an interferometric sensor for investigating macroscopic quantum mechanics on a table-top scale. The sensor consists of pair of suspended optical cavities with a finesse in excess of 100,000 comprising 10 g fused-silica mirrors. In the current room-temperature operation, we achieve a peak sensitivity of \SI{0.5}{\fmasd} in the acoustic frequency band, limited by the readout noise. With additional suppression of the readout noise, we will be able to reach the quantum radiation pressure noise, which would represent a novel measurement of the quantum back-action effect. Such a sensor can eventually be utilised for demonstrating macroscopic entanglement and testing semi-classical and quantum gravity models.
△ Less
Submitted 17 April, 2024; v1 submitted 1 February, 2024;
originally announced February 2024.
-
Design of a tabletop interferometer with quantum amplification
Authors:
Jiri Smetana,
Artemiy Dmitriev,
Chunnong Zhao,
Haixing Miao,
Denis Martynov
Abstract:
The sensitivity of laser interferometers is fundamentally limited by the quantum nature of light. Recent theoretical studies have opened a new avenue to enhance their quantum-limited sensitivity by using active parity-time-symmetric and phase-insensitive quantum amplification. These systems can enhance the signal response without introducing excess noise in the ideal case. However, such active sys…
▽ More
The sensitivity of laser interferometers is fundamentally limited by the quantum nature of light. Recent theoretical studies have opened a new avenue to enhance their quantum-limited sensitivity by using active parity-time-symmetric and phase-insensitive quantum amplification. These systems can enhance the signal response without introducing excess noise in the ideal case. However, such active systems must be causal, stable, and carefully tuned to be practical and applicable to precision measurements. In this paper, we show that phase-insensitive amplification in laser interferometers can be implemented in a tabletop experiment. The layout consists of two coupled cavities and an active medium comprised of a silicon nitride membrane and an auxiliary pump field. Our design relies on existing membrane and cryogenic technology and can demonstrate three distinct features: (i) the self-stabilized dynamics of the optical system, (ii) quantum enhancement of its sensitivity in the presence of the amplifier, and (iii) optical control of the amplifier gain. These features are needed to enhance the sensitivity of future interferometric gravitational-wave and axion detectors.
△ Less
Submitted 10 October, 2022;
originally announced October 2022.
-
Enhancing the sensitivity of interferometers with stable phase-insensitive quantum filters
Authors:
Artemiy Dmitriev,
Haixing Miao,
Denis Martynov
Abstract:
We present a new quantum control strategy for increasing the shot-noise-limited sensitivity of optical interferometers. The strategy utilizes active phase-insensitive quantum filtering of the signal inside the interferometer and does not rely on optical squeezing. On the example of the coupled-cavity resonators, employed in the gravitational-wave detectors, we show that fully causal and stable pha…
▽ More
We present a new quantum control strategy for increasing the shot-noise-limited sensitivity of optical interferometers. The strategy utilizes active phase-insensitive quantum filtering of the signal inside the interferometer and does not rely on optical squeezing. On the example of the coupled-cavity resonators, employed in the gravitational-wave detectors, we show that fully causal and stable phase-insensitive filters can improve the interferometer sensitivity by more than an order of magnitude. The role of the phase-insensitive component in such systems is to provide frequency-dependent compensation for the unwanted dispersion introduced by the position-sensing optical cavity. The system's stability is achieved by limiting the frequency band of this compensation. We demonstrate that stable optomechanical PT-symmetric filters comprise a special subclass of such phase-insensitive devices and find entirely new solutions which overcome the sensitivity of PT-symmetric filters. This scheme is robust against optical loss at the output of the detectors and in the cavities.
△ Less
Submitted 27 June, 2022; v1 submitted 28 October, 2021;
originally announced October 2021.
-
LIGOs Quantum Response to Squeezed States
Authors:
L. McCuller,
S. E. Dwyer,
A. C. Green,
Haocun Yu,
L. Barsotti,
C. D. Blair,
D. D. Brown,
A. Effler,
M. Evans,
A. Fernandez-Galiana,
P. Fritschel,
V. V. Frolov,
N. Kijbunchoo,
G. L. Mansell,
F. Matichard,
N. Mavalvala,
D. E. McClelland,
T. McRae,
A. Mullavey,
D. Sigg,
B. J. J. Slagmolen,
M. Tse,
T. Vo,
R. L. Ward,
C. Whittle
, et al. (172 additional authors not shown)
Abstract:
Gravitational Wave interferometers achieve their profound sensitivity by combining a Michelson interferometer with optical cavities, suspended masses, and now, squeezed quantum states of light. These states modify the measurement process of the LIGO, VIRGO and GEO600 interferometers to reduce the quantum noise that masks astrophysical signals; thus, improvements to squeezing are essential to furth…
▽ More
Gravitational Wave interferometers achieve their profound sensitivity by combining a Michelson interferometer with optical cavities, suspended masses, and now, squeezed quantum states of light. These states modify the measurement process of the LIGO, VIRGO and GEO600 interferometers to reduce the quantum noise that masks astrophysical signals; thus, improvements to squeezing are essential to further expand our gravitational view of the universe. Further reducing quantum noise will require both lowering decoherence from losses as well more sophisticated manipulations to counter the quantum back-action from radiation pressure. Both tasks require fully understanding the physical interactions between squeezed light and the many components of km-scale interferometers. To this end, data from both LIGO observatories in observing run three are expressed using frequency-dependent metrics to analyze each detector's quantum response to squeezed states. The response metrics are derived and used to concisely describe physical mechanisms behind squeezing's simultaneous interaction with transverse-mode selective optical cavities and the quantum radiation pressure noise of suspended mirrors. These metrics and related analysis are broadly applicable for cavity-enhanced optomechanics experiments that incorporate external squeezing, and -- for the first time -- give physical descriptions of every feature so far observed in the quantum noise of the LIGO detectors.
△ Less
Submitted 25 May, 2021;
originally announced May 2021.
-
Enhancing interferometer sensitivity without sacrificing bandwidth and stability: beyond single-mode and resolved-sideband approximation
Authors:
Xiang Li,
Jiri Smetana,
Amit Singh Ubhi,
Joe Bentley,
Yanbei Chen,
Yiqiu Ma,
Haixing Miao,
Denis Martynov
Abstract:
Quantum noise limits the sensitivity of precision measurement devices, such as laser interferometer gravitational-wave observatories and axion detectors. In the shot-noise-limited regime, these resonant detectors are subject to a trade-off between the peak sensitivity and bandwidth. One approach to circumvent this limitation in gravitational-wave detectors is to embed an anomalous-dispersion optom…
▽ More
Quantum noise limits the sensitivity of precision measurement devices, such as laser interferometer gravitational-wave observatories and axion detectors. In the shot-noise-limited regime, these resonant detectors are subject to a trade-off between the peak sensitivity and bandwidth. One approach to circumvent this limitation in gravitational-wave detectors is to embed an anomalous-dispersion optomechanical filter to broaden the bandwidth. The original filter cavity design, however, makes the entire system unstable. Recently, we proposed the coherent feedback between the arm cavity and the optomechanical filter to eliminate the instability via PT-symmetry. The original analysis based upon the Hamiltonian formalism adopted the single-mode and resolved-sideband approximations. In this paper, we go beyond these approximations and consider realistic parameters. We show that the main conclusion concerning stability remains intact, with both Nyquist analysis and a detailed time-domain simulation.
△ Less
Submitted 6 April, 2021;
originally announced April 2021.
-
Approaching the motional ground state of a 10 kg object
Authors:
Chris Whittle,
Evan D. Hall,
Sheila Dwyer,
Nergis Mavalvala,
Vivishek Sudhir,
R. Abbott,
A. Ananyeva,
C. Austin,
L. Barsotti,
J. Betzwieser,
C. D. Blair,
A. F. Brooks,
D. D. Brown,
A. Buikema,
C. Cahillane,
J. C. Driggers,
A. Effler,
A. Fernandez-Galiana,
P. Fritschel,
V. V. Frolov,
T. Hardwick,
M. Kasprzack,
K. Kawabe,
N. Kijbunchoo,
J. S. Kissel
, et al. (175 additional authors not shown)
Abstract:
The motion of a mechanical object -- even a human-sized object -- should be governed by the rules of quantum mechanics. Coaxing them into a quantum state is, however, difficult: the thermal environment masks any quantum signature of the object's motion. Indeed, the thermal environment also masks effects of proposed modifications of quantum mechanics at large mass scales. We prepare the center-of-m…
▽ More
The motion of a mechanical object -- even a human-sized object -- should be governed by the rules of quantum mechanics. Coaxing them into a quantum state is, however, difficult: the thermal environment masks any quantum signature of the object's motion. Indeed, the thermal environment also masks effects of proposed modifications of quantum mechanics at large mass scales. We prepare the center-of-mass motion of a 10 kg mechanical oscillator in a state with an average phonon occupation of 10.8. The reduction in temperature, from room temperature to 77 nK, is commensurate with an 11 orders-of-magnitude suppression of quantum back-action by feedback -- and a 13 orders-of-magnitude increase in the mass of an object prepared close to its motional ground state. This begets the possibility of probing gravity on massive quantum systems.
△ Less
Submitted 9 July, 2021; v1 submitted 24 February, 2021;
originally announced February 2021.
-
Quantum correlations between the light and kilogram-mass mirrors of LIGO
Authors:
Haocun Yu,
L. McCuller,
M. Tse,
L. Barsotti,
N. Mavalvala,
J. Betzwieser,
C. D. Blair,
S. E. Dwyer,
A. Effler,
M. Evans,
A. Fernandez-Galiana,
P. Fritschel,
V. V. Frolov,
N. Kijbunchoo,
F. Matichard,
D. E. McClelland,
T. McRae,
A. Mullavey,
D. Sigg,
B. J. J. Slagmolen,
C. Whittle,
A. Buikema,
Y. Chen,
T. R. Corbitt,
R. Schnabel
, et al. (174 additional authors not shown)
Abstract:
Measurement of minuscule forces and displacements with ever greater precision encounters a limit imposed by a pillar of quantum mechanics: the Heisenberg uncertainty principle. A limit to the precision with which the position of an object can be measured continuously is known as the standard quantum limit (SQL). When light is used as the probe, the SQL arises from the balance between the uncertain…
▽ More
Measurement of minuscule forces and displacements with ever greater precision encounters a limit imposed by a pillar of quantum mechanics: the Heisenberg uncertainty principle. A limit to the precision with which the position of an object can be measured continuously is known as the standard quantum limit (SQL). When light is used as the probe, the SQL arises from the balance between the uncertainties of photon radiation pressure imposed on the object and of the photon number in the photoelectric detection. The only possibility surpassing the SQL is via correlations within the position/momentum uncertainty of the object and the photon number/phase uncertainty of the light it reflects. Here, we experimentally prove the theoretical prediction that this type of quantum correlation is naturally produced in the Laser Interferometer Gravitational-wave Observatory (LIGO). Our measurements show that the quantum mechanical uncertainties in the phases of the 200 kW laser beams and in the positions of the 40 kg mirrors of the Advanced LIGO detectors yield a joint quantum uncertainty a factor of 1.4 (3dB) below the SQL. We anticipate that quantum correlations will not only improve gravitational wave (GW) observatories but all types of measurements in future.
△ Less
Submitted 4 February, 2020;
originally announced February 2020.
-
Quantum correlation of light mediated by gravity
Authors:
Haixing Miao,
Denis Martynov,
Huan Yang,
Animesh Datta
Abstract:
We propose to explore the quantum nature of gravity using the correlation of light between two optomechanical cavities, and the quantumness of the correlation is witnessed by squeezing. As long as the gravity between the end mirrors of two cavities is quantum in the Newtonian limit, we show that the squeezing is always nonzero and monotonically increases as the mechanical property of the mirrors i…
▽ More
We propose to explore the quantum nature of gravity using the correlation of light between two optomechanical cavities, and the quantumness of the correlation is witnessed by squeezing. As long as the gravity between the end mirrors of two cavities is quantum in the Newtonian limit, we show that the squeezing is always nonzero and monotonically increases as the mechanical property of the mirrors is improved. The proposed scheme provides a new pathway for testing the quantum nature of gravity systematically with tabletop experiments.
△ Less
Submitted 19 February, 2020; v1 submitted 17 January, 2019;
originally announced January 2019.
-
Quantum correlation measurements in interferometric gravitational wave detectors
Authors:
D. V. Martynov,
V. V. Frolov,
S. Kandhasamy,
K. Izumi,
H. Miao,
N. Mavalvala,
E. D. Hall,
R. Lanza,
B. P. Abbott,
R. Abbott,
T. D. Abbott,
C. Adams,
R. X. Adhikari,
S. B. Anderson,
A. Ananyeva,
S. Appert,
K. Arai,
S. M. Aston,
S. W. Ballmer,
D. Barker,
B. Barr,
L. Barsotti,
J. Bartlett,
I. Bartos,
J. C. Batch
, et al. (177 additional authors not shown)
Abstract:
Quantum fluctuations in the phase and amplitude quadratures of light set limitations on the sensitivity of modern optical instruments. The sensitivity of the interferometric gravitational wave detectors, such as the Advanced Laser Interferometer Gravitational wave Observatory (LIGO), is limited by quantum shot noise, quantum radiation pressure noise, and a set of classical noises. We show how the…
▽ More
Quantum fluctuations in the phase and amplitude quadratures of light set limitations on the sensitivity of modern optical instruments. The sensitivity of the interferometric gravitational wave detectors, such as the Advanced Laser Interferometer Gravitational wave Observatory (LIGO), is limited by quantum shot noise, quantum radiation pressure noise, and a set of classical noises. We show how the quantum properties of light can be used to distinguish these noises using correlation techniques. Particularly, in the first part of the paper we show estimations of the coating thermal noise and gas phase noise, hidden below the quantum shot noise in the Advanced LIGO sensitivity curve. We also make projections on the observatory sensitivity during the next science runs. In the second part of the paper we discuss the correlation technique that reveals the quantum radiation pressure noise from the background of classical noises and shot noise. We apply this technique to the Advanced LIGO data, collected during the first science run, and experimentally estimate the quantum correlations and quantum radiation pressure noise in the interferometer for the first time.
△ Less
Submitted 10 February, 2017;
originally announced February 2017.
-
Gravitationally induced phase shift on a single photon
Authors:
Christopher Hilweg,
Francesco Massa,
Denis Martynov,
Nergis Mavalvala,
Piotr T. Chrusciel,
Philip Walther
Abstract:
The effect of the Earth's gravitational potential on a quantum wave function has only been observed for massive particles. In this paper we present a scheme to measure a gravitationally induced phase shift on a single photon travelling in a coherent superposition along different paths of an optical fiber interferometer. To create a measurable signal for the interaction between the static gravitati…
▽ More
The effect of the Earth's gravitational potential on a quantum wave function has only been observed for massive particles. In this paper we present a scheme to measure a gravitationally induced phase shift on a single photon travelling in a coherent superposition along different paths of an optical fiber interferometer. To create a measurable signal for the interaction between the static gravitational potential and the wave function of the photon, we propose a variant of a conventional Mach-Zehnder interferometer. We show that the predicted relative phase difference of $10^{-5}$ radians is measurable even in the presence of fiber noise, provided additional stabilization techniques are implemented for each arm of a large-scale fiber interferometer. Effects arising from the rotation of the Earth and the material properties of the fibers are analysed. We conclude that optical fiber interferometry is a feasible way to measure the gravitationally induced phase shift on a single-photon wave function, and thus provides a means to corroborate the equivalence of the energy of the photon and its effective gravitational mass.
△ Less
Submitted 12 December, 2016;
originally announced December 2016.
