-
Using non-Gaussian quantum states for detection of a given phase shift
Authors:
V. L. Gorshenin,
F. Ya. Khalili
Abstract:
Injecting a non-Gaussian (Fock or Shrödinger cat) quantum state into the dark port of a two-arm interferometer and a strong classical light into the bright one, it is possible, in principle, to detect a given phase shift unambiguously using the orthogonality between the original and displaced in the interferometer non-Gaussian states.
The optical losses degrade the sensitivity, introducing the f…
▽ More
Injecting a non-Gaussian (Fock or Shrödinger cat) quantum state into the dark port of a two-arm interferometer and a strong classical light into the bright one, it is possible, in principle, to detect a given phase shift unambiguously using the orthogonality between the original and displaced in the interferometer non-Gaussian states.
The optical losses degrade the sensitivity, introducing the finite "false positive" and "false negative" detection errors. However, using the state-of-art photodetectors, it is still possible to obtain better detection fidelity than in the case of Gaussian quantum states.
△ Less
Submitted 11 May, 2024;
originally announced May 2024.
-
A new double-pass type of the optical spring
Authors:
F. Ya. Khalili
Abstract:
In detuned optical cavities, the radiation pressure force acting on the mirrors depends on their displacements. This is equivalent to the rigidity (the optical spring), inserted between the mirrors. This effect can be used for optimization of the mechanical susceptibility of probe mirrors in high-precision force sensors. However, in some cases, the use of detuned cavities or even just any high-fin…
▽ More
In detuned optical cavities, the radiation pressure force acting on the mirrors depends on their displacements. This is equivalent to the rigidity (the optical spring), inserted between the mirrors. This effect can be used for optimization of the mechanical susceptibility of probe mirrors in high-precision force sensors. However, in some cases, the use of detuned cavities or even just any high-finesse cavities could be problematic due to technological constraints.
We consider a new type of the optical spring that does not require the cavity (but can use a resonance tuned one to increase the optomechanical coupling). Instead, it uses the double interaction of the probing light with the mechanical object. We propose two possible implementation of this concept, suitable, respectively, for the atomic spin ensembles and for the laser gravitational-wave detectors.
△ Less
Submitted 26 March, 2024;
originally announced March 2024.
-
Sensitivity of quantum-enhanced interferometers
Authors:
Dariya Salykina,
Farid Ya. Khalili
Abstract:
We consider various configuration of quantum-enhanced interferometers, both linear (SU(2)) and non-linear (SU(1,1)) ones, as well as hybrid SU(2)/SU(1,1) schemes. Using the unified modular approach, based on the Quantum Cramer-Rao bound, we show that in all practical cases, their sensitivity is limited by the same equations (95) or (97) which first appeared in the pioneering work by C.Caves [Phys.…
▽ More
We consider various configuration of quantum-enhanced interferometers, both linear (SU(2)) and non-linear (SU(1,1)) ones, as well as hybrid SU(2)/SU(1,1) schemes. Using the unified modular approach, based on the Quantum Cramer-Rao bound, we show that in all practical cases, their sensitivity is limited by the same equations (95) or (97) which first appeared in the pioneering work by C.Caves [Phys.Rev.D 23, 1693 (1981)].
△ Less
Submitted 15 December, 2022;
originally announced December 2022.
-
Improving Kerr QND measurement sensitivity via squeezed light
Authors:
Stepan Balybin,
Dariya Salykina,
Farid Ya. Khalili
Abstract:
In ref [Phys. Rev. A 106, 013720], the scheme of quantum non-demolition measurement of optical quanta that uses a resonantly enhanced Kerr nonlinearity in optical microresonators was analyzed theoretically. It was shown that using the modern high-Q microresonators, it is possible to achieve the sensitivity several times better than the standard quantum limit. Here we propose and analyze in detail…
▽ More
In ref [Phys. Rev. A 106, 013720], the scheme of quantum non-demolition measurement of optical quanta that uses a resonantly enhanced Kerr nonlinearity in optical microresonators was analyzed theoretically. It was shown that using the modern high-Q microresonators, it is possible to achieve the sensitivity several times better than the standard quantum limit. Here we propose and analyze in detail a significantly improved version of that scheme. We show, that by using a squeezed quantum state of the probe beam and the anti-squeezing (parametric amplification) of this beam at the output of the microresonator, it is possible to reduce the measurement imprecision by about one order of magnitude. The resulting sensitivity allows to generate and verify multi-photon non-Gaussian quantum states of light, making the scheme considered here interesting for the quantum information processing tasks.
△ Less
Submitted 14 August, 2023; v1 submitted 3 October, 2022;
originally announced October 2022.
-
Robustness of negativity of the Wigner function to dissipation
Authors:
B. Nugmanov,
N. Zunikov,
F. Ya. Khalili
Abstract:
Non-Gaussian quantum states, described by negative valued Wigner functions, are important both for fundamental tests of quantum physics and for emerging quantum information technologies. However, they are vulnerable to dissipation. It is known, that the Wigner functions negativity could exist only if the overall quantum efficiency $η$ of the setup is higher than 1/2. Here we prove that this condit…
▽ More
Non-Gaussian quantum states, described by negative valued Wigner functions, are important both for fundamental tests of quantum physics and for emerging quantum information technologies. However, they are vulnerable to dissipation. It is known, that the Wigner functions negativity could exist only if the overall quantum efficiency $η$ of the setup is higher than 1/2. Here we prove that this condition is not only necessary but also a sufficient one: the negativity always persists while this condition is fulfilled. At the same time, in the case of bright (multi-photon) non-Gaussian quantum states, the negativity dependence on $η$ is highly non-linear. With the loss of several photons, it drops by orders of magnitude, hampering its experimental detection.
△ Less
Submitted 10 January, 2022;
originally announced January 2022.
-
QND measurements of photon number in monolithic microcavities
Authors:
S. N. Balybin,
A. B. Matsko,
F. Ya. Khalili,
D. V. Strekalov,
V. S. Iltchenko,
A. A. Savchenkov,
N. M. Lebedev,
I. A. Bilenko
Abstract:
We revisit the idea of quantum nondemolition measurement (QND) of optical quanta via a resonantly enhanced Kerr nonlinearity taking into account quantum back action and show that the monolithic microcavities enable QND measurement of number of quanta in a weak signal field using a spatially overlap** classical probe field. Due to the cross-phase modulation effect, the phase of the probe field ac…
▽ More
We revisit the idea of quantum nondemolition measurement (QND) of optical quanta via a resonantly enhanced Kerr nonlinearity taking into account quantum back action and show that the monolithic microcavities enable QND measurement of number of quanta in a weak signal field using a spatially overlap** classical probe field. Due to the cross-phase modulation effect, the phase of the probe field acquires information about the signal number of quanta without altering it. We find the exact solution to the Heisenberg equations of motion of this system and calculate the measurement error, accounting for the optical losses in the measurement path. We identify a realistic approximation to obtain the explicit form of the final conditional quantum state of the signal field, accounting for the undesirable self-phase modulation effect and designing the optimal homodyne measurement of the probe beam to evade this effect. We show that the best modern monolithic microcavities allow achieving the measurement imprecision several times better than the standard quantum limit.
△ Less
Submitted 29 November, 2021;
originally announced November 2021.
-
Trajectories without quantum uncertainties in composite systems with disparate energy spectra
Authors:
Emil Zeuthen,
Eugene S. Polzik,
Farid Ya. Khalili
Abstract:
It is well established that measurement-induced quantum back action (QBA) can be eliminated in composite systems by engineering so-called quantum-mechanics-free subspaces (QMFSs) of commuting variables, leading to a trajectory of a quantum system without quantum uncertainties. This situation can be realized in a composite system that includes a negative-mass subsystem, which can be implemented by,…
▽ More
It is well established that measurement-induced quantum back action (QBA) can be eliminated in composite systems by engineering so-called quantum-mechanics-free subspaces (QMFSs) of commuting variables, leading to a trajectory of a quantum system without quantum uncertainties. This situation can be realized in a composite system that includes a negative-mass subsystem, which can be implemented by, e.g., a polarized spin ensemble or a two-tone-driven optomechanical system. The realization of a trajectory without quantum uncertainties implies entanglement between the subsystems, and allows for measurements of motion, fields and forces with, in principle, unlimited precision. To date, these principles have been developed theoretically and demonstrated experimentally for a number of composite systems. However, the utility of the concept has been limited by the dominating requirement of close proximity of the resonance frequencies of the system of interest and the negative-mass reference system, and by the need to embed the subsystems in a narrowband cavity, which could be problematic while at the same time achieving good overcoupling. Here we propose a general approach which overcomes these limitations by employing periodic modulation of the driving fields (e.g., two-tone driving) in combination with coherent or measurement-based anti-noise paths. This approach makes it possible to engineer a QMFS of two systems with vastly different spectra and with arbitrary signs of their masses, while dispensing with the need to embed the subsystems in a sideband-resolving cavity. We discuss the advantages of this novel approach for applications such as QBA evasion in gravitational wave detection, force sensing, and entanglement generation between disparate systems.
△ Less
Submitted 23 February, 2022; v1 submitted 4 November, 2021;
originally announced November 2021.
-
Quantum limits for stationary force sensing
Authors:
Farid Ya. Khalili,
Emil Zeuthen
Abstract:
State-of-the-art sensors of force, motion and magnetic fields have reached the sensitivity where the quantum noise of the meter is significant or even dominant. In particular, the sensitivity of the best optomechanical devices has reached the Standard Quantum Limit (SQL), which directly follows from the Heisenberg uncertainty relation and corresponds to balancing the measurement imprecision and th…
▽ More
State-of-the-art sensors of force, motion and magnetic fields have reached the sensitivity where the quantum noise of the meter is significant or even dominant. In particular, the sensitivity of the best optomechanical devices has reached the Standard Quantum Limit (SQL), which directly follows from the Heisenberg uncertainty relation and corresponds to balancing the measurement imprecision and the perturbation of the probe by the quantum back action of the meter. The SQL is not truly fundamental and several methods for its overcoming have been proposed and demonstrated. At the same time, two quantum sensitivity constraints which are more fundamental are known. The first limit arises from the finiteness of the probing strength (in the case of optical interferometers - of the circulating optical power) and is known as the Energetic Quantum Limit or, in a more general context, as the Quantum Cramér-Rao Bound (QCRB). The second limit arises from the dissipative dynamics of the probe, which prevents full efficacy of the quantum back action evasion techniques developed for overcoming the SQL. No particular name has been assigned to this limit; we propose the term Dissipative Quantum Limit (DQL) for it. Here we develop a unified theory of these two fundamental limits by deriving the general sensitivity constraint from which they follow as particular cases. Our analysis reveals a phase transition occurring at the boundary between the QCRB-dominated and the DQL regimes, manifested by the discontinuous derivatives of the optimal spectral densities of the meter field quantum noise. This leads to the counter-intuitive (but favorable) finding that quantum-limited sensitivity can be achieved with certain lossy meter systems. Finally, we show that the DQL originates from the non-autocommutativity of the internal thermal noise of the probe and that it can be overcome in non-stationary measurements.
△ Less
Submitted 18 December, 2020; v1 submitted 30 November, 2020;
originally announced November 2020.
-
Broadening the high sensitivity range of squeezing-assisted interferometers by means of two-channel detection
Authors:
Gaurav Shukla,
Dariya Salykina,
Gaetano Frascella,
Devendra Kumar Mishra,
Maria V. Chekhova,
Farid Ya. Khalili
Abstract:
For a squeezing-enhanced SU(2) interferometer, we theoretically investigate the possibility to broaden the phase range of sub-shot-noise sensitivity. We show that this goal can be achieved by implementing detection in both output ports, with the optimal combination of the detectors outputs, leading to a phase sensitivity independent of the interferometer operation point. Provided that each detecto…
▽ More
For a squeezing-enhanced SU(2) interferometer, we theoretically investigate the possibility to broaden the phase range of sub-shot-noise sensitivity. We show that this goal can be achieved by implementing detection in both output ports, with the optimal combination of the detectors outputs, leading to a phase sensitivity independent of the interferometer operation point. Provided that each detector is preceded by a phase-sensitive amplifier, this sensitivity could be also tolerant to the detection loss.
△ Less
Submitted 11 October, 2020;
originally announced October 2020.
-
Overcoming detection loss and noise in squeezing-based optical sensing
Authors:
Gaetano Frascella,
Sascha Agne,
Farid Ya. Khalili,
Maria V. Chekhova
Abstract:
Among the known resources of quantum metrology, one of the most practical and efficient is squeezing. Squeezed states of atoms and light improve the sensing of the phase, magnetic field, polarization, mechanical displacement. They promise to considerably increase signal-to-noise ratio in imaging and spectroscopy, and are already used in real-life gravitational-wave detectors. But despite being mor…
▽ More
Among the known resources of quantum metrology, one of the most practical and efficient is squeezing. Squeezed states of atoms and light improve the sensing of the phase, magnetic field, polarization, mechanical displacement. They promise to considerably increase signal-to-noise ratio in imaging and spectroscopy, and are already used in real-life gravitational-wave detectors. But despite being more robust than other states, they are still very fragile, which narrows the scope of their application. In particular, squeezed states are useless in measurements where the detection is inefficient or the noise is high. Here, we experimentally demonstrate a remedy against loss and noise: strong noiseless amplification before detection. This way, we achieve loss-tolerant operation of an interferometer fed with squeezed and coherent light. With only 50\% detection efficiency and with noise exceeding the level of squeezed light more than 50 times, we overcome the shot-noise limit by 6~dB. Sub-shot-noise phase sensitivity survives up to 87\% loss. Application of this technique to other types of optical sensing and imaging promises a full use of quantum resources in these fields.
△ Less
Submitted 5 March, 2021; v1 submitted 18 May, 2020;
originally announced May 2020.
-
Gravitational wave detection beyond the standard quantum limit using a negative-mass spin system and virtual rigidity
Authors:
Emil Zeuthen,
Eugene S. Polzik,
Farid Ya. Khalili
Abstract:
Gravitational wave detectors (GWDs), which have brought about a new era in astronomy, have reached such a level of maturity that further improvement necessitates quantum-noise-evading techniques. Numerous proposals to this end have been discussed in the literature, e.g., invoking frequency-dependent squeezing or replacing the current Michelson interferometer topology by that of the quantum speedme…
▽ More
Gravitational wave detectors (GWDs), which have brought about a new era in astronomy, have reached such a level of maturity that further improvement necessitates quantum-noise-evading techniques. Numerous proposals to this end have been discussed in the literature, e.g., invoking frequency-dependent squeezing or replacing the current Michelson interferometer topology by that of the quantum speedmeter. Recently, a proposal based on the linking of a standard interferometer to a negative-mass spin system via entangled light has offered an unintrusive and small-scale new approach to quantum noise evasion in GWDs [Phys. Rev. Lett. $\mathbf{121}$, 031101 (2018)]. The solution proposed therein does not require modifications to the highly refined core optics of the present GWD design and, when compared to previous proposals, is less prone to losses and imperfections of the interferometer. In the present article, we refine this scheme to an extent that the requirements on the auxiliary spin system are feasible with state-of-the-art implementations. This is accomplished by matching the effective (rather than intrinsic) susceptibilities of the interferometer and spin system using the virtual rigidity concept, which, in terms of implementation, requires only suitable choices of the various homodyne, probe, and squeezing phases.
△ Less
Submitted 24 September, 2019; v1 submitted 9 August, 2019;
originally announced August 2019.
-
High-fidelity detection of a phase shift using non-Gaussian quantum states of light
Authors:
F. Ya. Khalili
Abstract:
We show that by injecting a light pulse prepared in a non-Gaussian quantum state into the dark port of a two-arm interferometer, it is possible to detect a given phase shift with the fidelity which is limited only by the optical losses and the photodetection inefficiency. The value of the phase shift is inversely proportional to the amplitude of the classical carrier light injected into another (b…
▽ More
We show that by injecting a light pulse prepared in a non-Gaussian quantum state into the dark port of a two-arm interferometer, it is possible to detect a given phase shift with the fidelity which is limited only by the optical losses and the photodetection inefficiency. The value of the phase shift is inversely proportional to the amplitude of the classical carrier light injected into another (bright) port of the interferometer. It can be reduced by using an additional degenerate parametric amplifier (squeezer) in the input dark port and the matching anti-squeezer in the output dark port.
We show that using the modern high-efficiency photon number resolving detectors, it is possible to reduce the detection error by almost one order of magnitude in comparison with the ordinary (Gaussian-state) interferometry.
△ Less
Submitted 10 December, 2018;
originally announced December 2018.
-
Overcoming inefficient detection in sub-shot-noise absorption measurement and imaging
Authors:
E. Knyazev,
F. Ya. Khalili,
M. V. Chekhova
Abstract:
Photon-number squeezing and correlations enable measurement of absorption with an accuracy exceeding that of the shot-noise limit. However, sub-shot noise imaging and sensing based on these methods require high detection efficiency, which can be a serious obstacle if measurements are carried out in "difficult" spectral ranges. We show that this problem can be overcome through the phase-sensitive a…
▽ More
Photon-number squeezing and correlations enable measurement of absorption with an accuracy exceeding that of the shot-noise limit. However, sub-shot noise imaging and sensing based on these methods require high detection efficiency, which can be a serious obstacle if measurements are carried out in "difficult" spectral ranges. We show that this problem can be overcome through the phase-sensitive amplification before detection. Here we propose an experimental scheme of sub-shot-noise imaging with tolerance to detection losses.
△ Less
Submitted 18 October, 2018;
originally announced October 2018.
-
Quantum noise cancellation in asymmetric speed meters with balanced homodyne readout
Authors:
T Zhang,
E Knyazev,
S Steinlechner,
F Ya Khalili,
B W Barr,
A S Bell,
P Dupej,
C Gräf,
J Callaghan,
J S Hennig,
E A Houston,
S H Huttner,
S S Leavey,
D Pascucci,
B Sorazu,
A Spencer,
J Wright,
K A Strain,
S L Danilishin,
S Hild
Abstract:
Sagnac speed meter (SSM) topology is known as an alternative technique to reduce quantum back-action in gravitational-wave interferometers. However, any potential imbalance of the main beamsplitter was shown to reduce the quantum noise superiority of speed meter at low frequencies, caused due to increased laser noise coupling to the detection port. In this paper, we show that implementing balanced…
▽ More
Sagnac speed meter (SSM) topology is known as an alternative technique to reduce quantum back-action in gravitational-wave interferometers. However, any potential imbalance of the main beamsplitter was shown to reduce the quantum noise superiority of speed meter at low frequencies, caused due to increased laser noise coupling to the detection port. In this paper, we show that implementing balanced homodyne readout scheme and for a particular choice of the local oscillator (LO) delivery port, the excess laser noise contribution to quantum noise limited sensitivity (QNLS) is partly compensated and the speed meter sensitivity can outperform state-of-the-art position meters. This can be achieved by picking the local oscillator from interferometer reflection (\textit{co-moving} LO) or the main beamsplitter anti-reflective coating surface (BSAR LO). We also show that this relaxes the relative intensity noise (RIN) requirement of the input laser. For example, for a beam splitter imbalance of $0.1 \%$ in Glasgow speed meter proof of concept experiment, the RIN requirement at frequency of 100Hz decreases from $4\times 10^{-10}/\sqrt{\rm Hz}$ to $4\times 10^{-7}/\sqrt{\rm Hz}$, moving the RIN requirement from a not practical achievable value to one which is routinely achieved with moderate effort.
△ Less
Submitted 14 June, 2018;
originally announced June 2018.
-
Engineering the Optical Spring via Intra-Cavity Optical-Parametric Amplification
Authors:
Mikhail Korobko,
Farid Ya. Khalili,
Roman Schnabel
Abstract:
The 'optical spring' results from dynamical back-action and can be used to improve the sensitivity of cavity-enhanced gravitational-wave detectors. The effect occurs if an oscillation of the cavity length results in an oscillation of the intra-cavity light power having such a phase relation that the light's radiation pressure force amplifies the oscillation of the cavity length. Here, we analyse a…
▽ More
The 'optical spring' results from dynamical back-action and can be used to improve the sensitivity of cavity-enhanced gravitational-wave detectors. The effect occurs if an oscillation of the cavity length results in an oscillation of the intra-cavity light power having such a phase relation that the light's radiation pressure force amplifies the oscillation of the cavity length. Here, we analyse a Michelson interferometer whose optical-spring cavity includes an additional optical-parametric amplifier with adjustable phase. We find that the phase of the parametric pump field is a versatile parameter for sha** the interferometer's spectral density.
△ Less
Submitted 9 November, 2017; v1 submitted 10 September, 2017;
originally announced September 2017.
-
Quantum tomography enhanced through parametric amplification
Authors:
E. Knyazev,
K. Yu. Spasibko,
M. V. Chekhova,
F. Ya. Khalili
Abstract:
Quantum tomography is the standard method of reconstructing the Wigner function of quantum states of light by means of balanced homodyne detection. The reconstruction quality strongly depends on the photodetectors quantum efficiency and other losses in the measurement setup. In this article we analyse in detail a protocol of enhanced quantum tomography, proposed by Leonhardt and Paul in 1994, whic…
▽ More
Quantum tomography is the standard method of reconstructing the Wigner function of quantum states of light by means of balanced homodyne detection. The reconstruction quality strongly depends on the photodetectors quantum efficiency and other losses in the measurement setup. In this article we analyse in detail a protocol of enhanced quantum tomography, proposed by Leonhardt and Paul in 1994, which allows one to reduce the degrading effect of detection losses. It is based on phase sensitive parametric amplification, with the phase of the amplified quadrature being scanned synchronously with the local oscil- lator phase. Although with sufficiently strong amplification the protocol enables overcoming any detection inefficiency, it was so far not implemented in experiment, probably due to the losses in the amplifier. Here we discuss a possible proof-of-principle experiment with a traveling-wave parametric amplifier. We show that with the state-of-the art optical elements, the protocol enables high-fidelity tomographic reconstruction of bright nonclassical states of light. We consider two examples: bright squeezed vacuum and squeezed single-photon state, with the latter being a non-Gaussian state and both strongly affected by the losses.
△ Less
Submitted 12 August, 2017;
originally announced August 2017.
-
A new type of quantum speed meter interferometer: measuring speed to search for intermediate mass black holes
Authors:
Stefan L. Danilishin,
Eugene Knyazev,
Nikita V. Voronchev,
Farid Ya. Khalili,
Christian Gräf,
Sebastian Steinlechner,
Jan-Simon Hennig,
Stefan Hild
Abstract:
The recent discovery of gravitational waves (GW) by LIGO has impressively launched the novel field of gravitational astronomy and it allowed us to glimpse at exciting objects we could so far only speculate about. Further sensitivity improvements at the low frequency end of the detection band of future GW observatories rely on quantum non-demolition (QND) methods to suppress fundamental quantum flu…
▽ More
The recent discovery of gravitational waves (GW) by LIGO has impressively launched the novel field of gravitational astronomy and it allowed us to glimpse at exciting objects we could so far only speculate about. Further sensitivity improvements at the low frequency end of the detection band of future GW observatories rely on quantum non-demolition (QND) methods to suppress fundamental quantum fluctuations of the light fields used to readout the GW signal. Here we invent a novel concept of how to turn a conventional Michelson interferometer into a QND speed meter interferometer with coherently suppressed quantum back-action noise by using two orthogonal polarisations of light and an optical circulator to couple them. We carry out a detailed analysis of how imperfections and optical loss influence the achievable sensitivity and find that the configuration proposed here would significantly enhance the low frequency sensitivity and increase the observable event rate of binary black hole coalescences in the range of $10^2-10^3 M_\odot$ by a factor of up to $\sim300$.
△ Less
Submitted 22 March, 2017; v1 submitted 3 February, 2017;
originally announced February 2017.
-
Speedmeter scheme for gravitational-wave detectors based on EPR quantum entanglement
Authors:
E. Knyazev,
S. Danilishin,
S. Hild,
F. Ya. Khalili
Abstract:
We propose a new implementation of a quantum speed meter QND measurement scheme. It employs two independent optical readouts of the interferometer test masses, featuring strongly different values of the bandwidths $γ_{1,2}$ and of the optical circulating power $I_{1,2}$, with the special relationship of $I_1/I_2=γ_1/γ_2$. The outputs of these two position meters have to be combined by an additiona…
▽ More
We propose a new implementation of a quantum speed meter QND measurement scheme. It employs two independent optical readouts of the interferometer test masses, featuring strongly different values of the bandwidths $γ_{1,2}$ and of the optical circulating power $I_{1,2}$, with the special relationship of $I_1/I_2=γ_1/γ_2$. The outputs of these two position meters have to be combined by an additional beamsplitter. In this scheme, signals at the common and the differential outputs of the interferometer setup are proportional to the position and the velocity of the test masses, respectively. The influence of the position meter-like back action force associated with the position signal can be cancelled using the EPR approach by measuring the amplitude quadrature of the beamsplitter common output correlated with this force. In the standard signal-recycled Michelson interferometer topology of the modern gravitational-wave detectors, two independent optical position meters can be implemented by two orthogonal polarisations of the probe light. Our analysis shows that the EPR speedmeter provides significantly improved sensitivity for all frequencies below $\sim 30\,{\rm Hz}$ compared to an equivalent signal recycled Michelson interferometer. We believe the EPR speedmeter scheme to be very attractive for future upgrades of gravitational wave detectors, because it requires only minor changes to be implemented in the interferometer hardware and allows to switch between the position meter and the speed meter modes within short time-scales and without any changes to the hardware.
△ Less
Submitted 6 January, 2017;
originally announced January 2017.
-
Generalized analysis of quantum noise and dynamic back-action in signal-recycled Michelson-type laser interferometers
Authors:
Farid Ya. Khalili,
Sergey P. Tarabrin,
Roman Schnabel,
Klemens Hammerer
Abstract:
We analyze the radiation pressure induced interaction of mirror motion and light fields in Michelson-type interferometers used for the detection of gravitational waves and for fundamental research in table-top quantum optomechanical experiments, focusing on the asymmetric regime with a (slightly) unbalanced beamsplitter and a (small) offset from the dark port. This regime, as it was shown recently…
▽ More
We analyze the radiation pressure induced interaction of mirror motion and light fields in Michelson-type interferometers used for the detection of gravitational waves and for fundamental research in table-top quantum optomechanical experiments, focusing on the asymmetric regime with a (slightly) unbalanced beamsplitter and a (small) offset from the dark port. This regime, as it was shown recently, provides new interesting features, in particular a stable optical spring and optical cooling on cavity resonance.
We show that generally the nature of optomechanical coupling in Michelson-type interferometers does not fit into the standard dispersive/dissipative dichotomy. In particular, a symmetric Michelson interferometer with signal-recycling but without power-recycling cavity is characterized by a purely dissipative optomechanical coupling; only in the presence of asymmetry, additional dispersive coupling arises. In gravitational waves detectors possessing signal- and power-recycling cavities, yet another, "coherent" type of optomechanical coupling takes place.
We develop here a generalized framework for the analysis of asymmetric Michelson-type interferometers which also covers the possibility of the injection of carrier light into both ports of the interferometer. Using this framework, we analyze in depth the "anomalous" features of the Michelson-Sagnac interferometer which where discussed and observed experimentally in previous works [1-3].
△ Less
Submitted 5 April, 2016;
originally announced April 2016.
-
On universal decoherence under gravity: a perspective through the Equivalence Principle
Authors:
B. Pang,
F. Y. Khalili,
Y. Chen
Abstract:
In Nature Phys. 11, 668 (2015) (Ref. [1]), a composite particle prepared in a pure initial quantum state and propagated in a uniform gravitational field is shown to undergo a decoherence process at a rate determined by the gravitational acceleration. By assuming Einstein's Equivalence Principle to be valid, we demonstrate, first in a Lorentz frame with accelerating detectors, and then directly in…
▽ More
In Nature Phys. 11, 668 (2015) (Ref. [1]), a composite particle prepared in a pure initial quantum state and propagated in a uniform gravitational field is shown to undergo a decoherence process at a rate determined by the gravitational acceleration. By assuming Einstein's Equivalence Principle to be valid, we demonstrate, first in a Lorentz frame with accelerating detectors, and then directly in the Lab frame with uniform gravity, that the dephasing between the different internal states arise not from gravity but rather from differences in their rest mass, and the mass dependence of the de Broglie wave's dispersion relation. We provide an alternative view to the situation considered by Ref. [1], where we propose that gravity plays a kinematic role in the loss of fringe visibility by giving the detector a transverse velocity relative to the particle beam; visibility can be easily recovered by giving the screen an appropriate uniform velocity. We finally propose that dephasing due to gravity may in fact take place for certain modifications to the gravitational potential where the Equivalence Principle is violated.
△ Less
Submitted 7 March, 2016;
originally announced March 2016.
-
Experimental Demonstration of Negative-Valued Polarization Quasi-Probability Distribution
Authors:
K. Yu. Spasibko,
M. V. Chekhova,
F. Ya. Khalili
Abstract:
Polarization quasiprobability distribution defined in the Stokes space shares many important properties with the Wigner function for the position and momentum. Most notably, they both give correct one-dimensional marginal probability distributions and therefore represent the natural choice for the probability distributions in classical hidden-variable models. In this context, negativity of the Wig…
▽ More
Polarization quasiprobability distribution defined in the Stokes space shares many important properties with the Wigner function for the position and momentum. Most notably, they both give correct one-dimensional marginal probability distributions and therefore represent the natural choice for the probability distributions in classical hidden-variable models. In this context, negativity of the Wigner function is considered as a proof of non-classicality for a quantum state. On the contrary, the polarization quasiprobability distribution demonstrates negativity for all quantum states. This feature comes from the discrete nature of the Stokes variables; however, it was not observed in previous experiments, because they were performed with photon-number averaging detectors. Here we reconstruct the polarization quasiprobability distribution of a coherent state with photon-number resolving detectors, which allows us to directly observe for the first time its negativity.
△ Less
Submitted 14 August, 2015;
originally announced August 2015.
-
Paired carriers as a way to reduce quantum noise of multi-carrier gravitational-wave detectors
Authors:
Mikhail Korobko,
Nikita Voronchev,
Haixing Miao,
Farid Ya. Khalili
Abstract:
We explore new regimes of laser interferometric gravitational-wave detectors with multiple optical carriers which allow to reduce the quantum noise of these detectors. In particular, we show that using two carriers with the opposite detunings, homodyne angles, and squeezing angles, but identical other parameters (the antisymmetric carriers), one can suppress the quantum noise in such a way that it…
▽ More
We explore new regimes of laser interferometric gravitational-wave detectors with multiple optical carriers which allow to reduce the quantum noise of these detectors. In particular, we show that using two carriers with the opposite detunings, homodyne angles, and squeezing angles, but identical other parameters (the antisymmetric carriers), one can suppress the quantum noise in such a way that its spectrum follows the Standard Quantum Limit (SQL) at low frequencies. Relaxing this antisymmetry condition, it is also possible to slightly overcome the SQL in broadband. Combining several such pairs in the xylophone configuration, it is possible to shape the quantum noise spectrum flexibly.
△ Less
Submitted 23 September, 2014;
originally announced September 2014.
-
Observation of generalized optomechanical coupling and cooling on cavity resonance
Authors:
Andreas Sawadsky,
Henning Kaufer,
Ramon Moghadas Nia,
Sergey P. Tarabrin,
Farid Ya. Khalili,
Klemens Hammerer,
Roman Schnabel
Abstract:
Optomechanical coupling between a light field and the motion of a cavity mirror via radiation pressure plays an important role for the exploration of macroscopic quantum physics and for the detection of gravitational waves (GWs). It has been used to cool mechanical oscillators into their quantum ground states and has been considered to boost the sensitivity of GW detectors, e.g. via the optical sp…
▽ More
Optomechanical coupling between a light field and the motion of a cavity mirror via radiation pressure plays an important role for the exploration of macroscopic quantum physics and for the detection of gravitational waves (GWs). It has been used to cool mechanical oscillators into their quantum ground states and has been considered to boost the sensitivity of GW detectors, e.g. via the optical spring effect. Here, we present the experimental characterization of generalized, that is, dispersive and dissipative optomechanical coupling, with a macroscopic (1.5mm)^2-sized silicon nitride (SiN) membrane in a cavity-enhanced Michelson-type interferometer. We report for the first time strong optomechanical cooling based on dissipative coupling, even on cavity resonance, in excellent agreement with theory. Our result will allow for new experimental regimes in macroscopic quantum physics and GW detection.
△ Less
Submitted 26 January, 2015; v1 submitted 11 September, 2014;
originally announced September 2014.
-
Non-classical features of Polarization Quasi-Probability Distribution
Authors:
M. V. Chekhova,
F. Ya. Khalili
Abstract:
Polarization quasi-probability distribution (PQPD) is defined in the Stokes space, and it enables the calculation of mean values and higher-order moments for polarization observables using simple algebraic averaging. It can be reconstructed with the help of polarization quantum tomography and provides a full description of the polarization properties of quantum states of light.
We show here that…
▽ More
Polarization quasi-probability distribution (PQPD) is defined in the Stokes space, and it enables the calculation of mean values and higher-order moments for polarization observables using simple algebraic averaging. It can be reconstructed with the help of polarization quantum tomography and provides a full description of the polarization properties of quantum states of light.
We show here that, due to its definition in terms of the discrete-valued Stokes operators, polarization quasi-probability distribution has singularities and takes negative values at integer values of the Stokes observables. However, in experiments with `bright' many-photon states, the photon-number resolution is typically smeared due to the technical limitations of contemporary photodetectors. This results in a PQPD that is positive and regular even for such strongly nonclassical states as single-photon seeded squeezed vacuum.
This problem can be solved by `highlighting' the quantum state, that is, by adding a strong coherent beam into the orthogonal polarization mode. This procedure bridges polarization quantum tomography with the Wigner-function tomography, while preserving the main advantage of the first one, namely, immunity to the common phase fluctuations in the light path. Thus, it provides a convenient method for the verification of bright nonclassical states of light, such as squeezed Fock states.
△ Less
Submitted 30 May, 2013; v1 submitted 23 May, 2013;
originally announced May 2013.
-
Anomalous dynamic back-action in interferometers
Authors:
Sergey P. Tarabrin,
Henning Kaufer,
Farid Ya. Khalili,
Roman Schnabel,
Klemens Hammerer
Abstract:
We analyze the dynamic optomechanical back-action in signal-recycled Michelson and Michelson-Sagnac interferometers that are operated off dark port. We show that in this case --- and in contrast to the well-studied canonical form of dynamic back-action on dark port --- optical dam** in a Michelson-Sagnac interferometer acquires a non-zero value on cavity resonance, and additional stability/insta…
▽ More
We analyze the dynamic optomechanical back-action in signal-recycled Michelson and Michelson-Sagnac interferometers that are operated off dark port. We show that in this case --- and in contrast to the well-studied canonical form of dynamic back-action on dark port --- optical dam** in a Michelson-Sagnac interferometer acquires a non-zero value on cavity resonance, and additional stability/instability regions on either side of the resonance, revealing new regimes of cooling/heating of micromechanical oscillators. In a free-mass Michelson interferometer for a certain region of parameters we predict a stable single-carrier optical spring (positive spring and positive dam**), which can be utilized for the reduction of quantum noise in future-generation gravitational-wave detectors.
△ Less
Submitted 23 August, 2013; v1 submitted 26 December, 2012;
originally announced December 2012.
-
Quantum back-action in measurements of zero-point mechanical oscillations
Authors:
Farid Ya. Khalili,
Haixing Miao,
Huan Yang,
Amir H. Safavi-Naeini,
Oskar Painter,
Yanbei Chen
Abstract:
Measurement-induced back action, a direct consequence of the Heisenberg Uncertainty Principle, is the defining feature of quantum measurements. We use quantum measurement theory to analyze the recent experiment of Safavi-Naeini et al. [Phys. Rev. Lett. {\bf 108}, 033602 (2012)], and show that results of this experiment not only characterize the zero-point fluctuation of a near-ground-state nanomec…
▽ More
Measurement-induced back action, a direct consequence of the Heisenberg Uncertainty Principle, is the defining feature of quantum measurements. We use quantum measurement theory to analyze the recent experiment of Safavi-Naeini et al. [Phys. Rev. Lett. {\bf 108}, 033602 (2012)], and show that results of this experiment not only characterize the zero-point fluctuation of a near-ground-state nanomechanical oscillator, but also demonstrate the existence of quantum back-action noise --- through correlations that exist between sensing noise and back-action noise. These correlations arise from the quantum coherence between the mechanical oscillator and the measuring device, which build up during the measurement process, and are key to improving sensitivities beyond the Standard Quantum Limit.
△ Less
Submitted 4 June, 2012;
originally announced June 2012.
-
Quantum Measurement Theory in Gravitational-Wave Detectors
Authors:
Stefan L. Danilishin,
Farid Ya. Khalili
Abstract:
The fast progress in improving the sensitivity of the gravitational-wave (GW) detectors, we all have witnessed in the recent years, has propelled the scientific community to the point, when quantum behaviour of such immense measurement devices as kilometer-long interferometers starts to matter. The time, when their sensitivity will be mainly limited by the quantum noise of light is round the corne…
▽ More
The fast progress in improving the sensitivity of the gravitational-wave (GW) detectors, we all have witnessed in the recent years, has propelled the scientific community to the point, when quantum behaviour of such immense measurement devices as kilometer-long interferometers starts to matter. The time, when their sensitivity will be mainly limited by the quantum noise of light is round the corner, and finding the ways to reduce it will become a necessity. Therefore, the primary goal we pursued in this review was to familiarize a broad spectrum of readers with the theory of quantum measurements in the very form it finds application in the area of gravitational-wave detection. We focus on how quantum noise arises in gravitational-wave interferometers and what limitations it imposes on the achievable sensitivity. We start from the very basic concepts and gradually advance to the general linear quantum measurement theory and its application to the calculation of quantum noise in the contemporary and planned interferometric detectors of gravitational radiation of the first and second generation. Special attention is paid to the concept of Standard Quantum Limit and the methods of its surmounting.
△ Less
Submitted 9 May, 2012; v1 submitted 8 March, 2012;
originally announced March 2012.
-
Interferometer readout-noise below the Standard Quantum Limit of a membrane
Authors:
Tobias Westphal,
Daniel Friedrich,
Henning Kaufer,
Kazuhiro Yamamoto,
Stefan Gossler,
Helge Mueller-Ebhardt,
Stefan L. Danilishin,
Farid Ya. Khalili,
Karsten Danzmann,
Roman Schnabel
Abstract:
Here we report on the realization of a Michelson-Sagnac interferometer whose purpose is the precise characterization of the motion of membranes showing significant light transmission. Our interferometer has a readout noise spectral density (imprecision) of 3E-16 m/sqrt(Hz) at frequencies around the fundamental resonance of a SiN_x membrane at about 100 kHz, without using optical cavities. The read…
▽ More
Here we report on the realization of a Michelson-Sagnac interferometer whose purpose is the precise characterization of the motion of membranes showing significant light transmission. Our interferometer has a readout noise spectral density (imprecision) of 3E-16 m/sqrt(Hz) at frequencies around the fundamental resonance of a SiN_x membrane at about 100 kHz, without using optical cavities. The readout noise demonstrated is more than 16 dB below the peak value of the membrane's standard quantum limit (SQL). This reduction is significantly higher than those of previous works with nano-wires [Teufel et al., Nature Nano. 4, 820 (2009); Anetsberger et al., Nature Phys. 5, 909 (2009)]. We discuss the meaning of the SQL for force measurements and its relation to the readout performance and conclude that neither our nor previous experiments achieved a total noise spectral density as low as the SQL.
△ Less
Submitted 30 November, 2011;
originally announced November 2011.
-
Pass-through Mach-Zehnder topologies for macroscopic quantum measurements
Authors:
F. Ya. Khalili
Abstract:
Several relatively small-scale experimental setups aimed on prototy** of future laser gravitational-wave detectors and testing of new methods of quantum measurements with macroscopic mechanical objects, are under development now. In these devices, not devoted directly to the gravitational-wave detection, Mach-Zehnder interferometer with pass-through Fabry-Perot cavities in the arms can be used i…
▽ More
Several relatively small-scale experimental setups aimed on prototy** of future laser gravitational-wave detectors and testing of new methods of quantum measurements with macroscopic mechanical objects, are under development now. In these devices, not devoted directly to the gravitational-wave detection, Mach-Zehnder interferometer with pass-through Fabry-Perot cavities in the arms can be used instead of the standard Michelson/Fabry-Perot one. The advantage of this topology is that it does not contain high-reflectivity end mirrors with multilayer coatings, which Brownian noise could constitute the major part of the noise budget of the Michelson/Fabry-Perot interferometers.
We consider here two variants of this topology: the "ordinary" position meter scheme, and a new variant of the quantum speed meter.
△ Less
Submitted 2 February, 2011;
originally announced February 2011.
-
Increasing the sensitivity of future gravitational-wave detectors with double squeezed-input
Authors:
Farid Ya. Khalili,
Haixing Miao,
Yanbei Chen
Abstract:
We consider improving the sensitivity of future interferometric gravitational-wave detectors by simultaneously injecting two squeezed vacuums (light), filtered through a resonant Fabry-Perot cavity, into the dark port of the interferometer.The same scheme with single squeezed vacuum was first proposed and analyzed by Corbitt et al. Here we show that the extra squeezed vacuum, together with an ad…
▽ More
We consider improving the sensitivity of future interferometric gravitational-wave detectors by simultaneously injecting two squeezed vacuums (light), filtered through a resonant Fabry-Perot cavity, into the dark port of the interferometer.The same scheme with single squeezed vacuum was first proposed and analyzed by Corbitt et al. Here we show that the extra squeezed vacuum, together with an additional homodyne detection suggested previously by one of the authors, allows reduction of quantum noise over the entire detection band. To motivate future implementations, we take into account a realistic technical noise budget for Advanced LIGO (AdvLIGO) and numerically optimize the parameters of both the filter and the interferometer for detecting gravitational-wave signals from two important astrophysics sources, namely Neutron-Star--Neutron-Star (NSNS) binaries and Bursts. Assuming the optical loss of the 30m filter cavity to be 10ppm per bounce and 10dB squeezing injection, the corresponding quantum noise with optimal parameters lowers by a factor of 10 at high frequencies and goes below the technical noise at low and intermediate frequencies.
△ Less
Submitted 12 August, 2009; v1 submitted 8 May, 2009;
originally announced May 2009.
-
The noise in gravitational-wave detectors and other classical-force measurements is not influenced by test-mass quantization
Authors:
Vladimir B. Braginsky,
Mikhail L. Gorodetsky,
Farid Ya. Khalili,
Andrey B. Matsko,
Kip S. Thorne,
Sergey P. Vyatchanin
Abstract:
It is shown that photon shot noise and radiation-pressure back-action noise are the sole forms of quantum noise in interferometric gravitational wave detectors that operate near or below the standard quantum limit, if one filters the interferometer output appropriately. No additional noise arises from the test masses' initial quantum state or from reduction of the test-mass state due to measurem…
▽ More
It is shown that photon shot noise and radiation-pressure back-action noise are the sole forms of quantum noise in interferometric gravitational wave detectors that operate near or below the standard quantum limit, if one filters the interferometer output appropriately. No additional noise arises from the test masses' initial quantum state or from reduction of the test-mass state due to measurement of the interferometer output or from the uncertainty principle associated with the test-mass state. Two features of interferometers are central to these conclusions: (i) The interferometer output (the photon number flux N(t) entering the final photodetector) commutes with itself at different times in the Heisenberg Picture, [N(t), N(t')] = 0, and thus can be regarded as classical. (ii) This number flux is linear in the test-mass initial position and momentum operators x_o and p_o, and those operators influence the measured photon flux N(t) in manners that can easily be removed by filtering -- e.g., in most interferometers, by discarding data near the test masses' 1 Hz swinging freqency. The test-mass operators x_o and p_o contained in the unfiltered output N(t) make a nonzero contribution to the commutator [N(t), N(t')]. That contribution is cancelled by a nonzero commutation of the photon shot noise and radiation-pressure noise, which also are contained in N(t). This cancellation of commutators is responsible for the fact that it is possible to derive an interferometer's standard quantum limit from test-mass considerations, and independently from photon-noise considerations. These conclusions are true for a far wider class of measurements than just gravitational-wave interferometers. To elucidate them, this paper presents a series of idealized thought experiments that are free from the complexities of real measuring systems.
△ Less
Submitted 1 December, 2002; v1 submitted 2 September, 2001;
originally announced September 2001.
-
Energetic Quantum Limit in Large-Scale Interferometers
Authors:
Vladimir B. Braginsky,
Mikhail L. Gorodetsky,
Farid Ya. Khalili,
Kip S. Thorne
Abstract:
For each optical topology of an interferometric gravitational wave detector, quantum mechanics dictates a minimum optical power (the ``energetic quantum limit'') to achieve a given sensitivity. For standard topologies, when one seeks to beat the standard quantum limit by a substantial factor, the energetic quantum limit becomes impossibly large. Intracavity readout schemes may do so with managea…
▽ More
For each optical topology of an interferometric gravitational wave detector, quantum mechanics dictates a minimum optical power (the ``energetic quantum limit'') to achieve a given sensitivity. For standard topologies, when one seeks to beat the standard quantum limit by a substantial factor, the energetic quantum limit becomes impossibly large. Intracavity readout schemes may do so with manageable optical powers.
△ Less
Submitted 12 December, 1999; v1 submitted 16 July, 1999;
originally announced July 1999.
-
Dual-Resonator Speed Meter for a Free Test Mass
Authors:
Vladimir B. Braginsky,
Mikhail L. Gorodetsky,
Farid Ya. Khalili,
Kip S. Thorne
Abstract:
A description and analysis are given of a ``speed meter'' for monitoring a classical force that acts on a test mass. This speed meter is based on two microwave resonators (``dual resonators''), one of which couples evanescently to the position of the test mass. The sloshing of the resulting signal between the resonators, and a wise choice of where to place the resonators' output waveguide, produ…
▽ More
A description and analysis are given of a ``speed meter'' for monitoring a classical force that acts on a test mass. This speed meter is based on two microwave resonators (``dual resonators''), one of which couples evanescently to the position of the test mass. The sloshing of the resulting signal between the resonators, and a wise choice of where to place the resonators' output waveguide, produce a signal in the waveguide that (for sufficiently low frequencies) is proportional to the test-mass velocity (speed) rather than its position. This permits the speed meter to achieve force-measurement sensitivities better than the standard quantum limit (SQL), both when operating in a narrow-band mode and a wide-band mode. A scrutiny of experimental issues shows that it is feasible, with current technology, to construct a demonstration speed meter that beats the wide-band SQL by a factor 2. A concept is sketched for an adaptation of this speed meter to optical frequencies; this adaptation forms the basis for a possible LIGO-III interferometer that could beat the gravitational-wave standard quantum limit h_SQL, but perhaps only by a factor 1/xi = h_SQL/h ~ 3 (constrained by losses in the optics) and at the price of a very high circulating optical power --- larger by 1/xi^2 than that required to reach the SQL.
△ Less
Submitted 25 June, 1999;
originally announced June 1999.
-
Quantum limits and symphotonic states in free-mass gravitational-wave antennae
Authors:
Vladimir B. Braginsky,
Michael L. Gorodetsky,
Farid Ya. Khalili
Abstract:
Quantum mechanics sets severe limits on the sensitivity and required circulating energy in traditional free-mass gravitational-wave antennas. One possible way to avoid these restrictions is the use of intracavity QND measurements. We analyze a new QND observable, which possesses a number of features that make it a promising candidate for such measurements and propose a practical scheme for the r…
▽ More
Quantum mechanics sets severe limits on the sensitivity and required circulating energy in traditional free-mass gravitational-wave antennas. One possible way to avoid these restrictions is the use of intracavity QND measurements. We analyze a new QND observable, which possesses a number of features that make it a promising candidate for such measurements and propose a practical scheme for the realization of this measurement. In combination with an advanced coordinate meter, this scheme makes it possible to lower substantially the requirements on the circulating power.
△ Less
Submitted 21 September, 1998; v1 submitted 24 June, 1998;
originally announced June 1998.
-
Speed Meter As a Quantum Nondemolition Measuring Device for Force
Authors:
F. Ya. Khalili,
Yu. Levin
Abstract:
Quantum noise is an important issue for advanced LIGO. Although it is in principle possible to beat the Standard Quantum Limit (SQL), no practical recipe has been found yet. This paper dicusses quantum noise in the context of speedmeter-a devise monitoring the speed of the testmass. The scheme proposed to overcome SQL in this case might be more practical than the methods based on monitoring posi…
▽ More
Quantum noise is an important issue for advanced LIGO. Although it is in principle possible to beat the Standard Quantum Limit (SQL), no practical recipe has been found yet. This paper dicusses quantum noise in the context of speedmeter-a devise monitoring the speed of the testmass. The scheme proposed to overcome SQL in this case might be more practical than the methods based on monitoring position of the testmass.
△ Less
Submitted 25 March, 1996;
originally announced March 1996.
