-
A single-photon large-momentum-transfer atom interferometry scheme for Sr or Yb atoms with application to determining the fine-structure constant
Authors:
Jesse S. Schelfhout,
Thomas M. Hird,
Kenneth M. Hughes,
Christopher J. Foot
Abstract:
The leading experimental determinations of the fine-structure constant, $α$, currently rely on atomic photon-recoil measurements from Ramsey-Bordé atom interferometry with large momentum transfer to provide an absolute mass measurement. We propose an experimental scheme for an intermediate-scale differential atom interferometer to measure the photon-recoil of neutral atomic species with a single-p…
▽ More
The leading experimental determinations of the fine-structure constant, $α$, currently rely on atomic photon-recoil measurements from Ramsey-Bordé atom interferometry with large momentum transfer to provide an absolute mass measurement. We propose an experimental scheme for an intermediate-scale differential atom interferometer to measure the photon-recoil of neutral atomic species with a single-photon optical clock transition. We calculate trajectories for our scheme that optimise the recoil phase while nullifying the undesired gravity-gradient phase by considering independently launching two clouds of ultracold atoms with the appropriate initial conditions. For Sr and Yb, we find an atom interferometer of height 3m to be sufficient for an absolute mass measurement precision of $Δm / m \sim 1\times 10^{-11}$ with current technology. Such a precise measurement (the first of its kind for Sr or Yb) would halve the uncertainty in $α$ -- an uncertainty that would no longer be limited by an absolute mass measurement. The removal of this limitation would allow the uncertainty in $α$ to be reduced by a factor of 10 by corresponding improvements in relative mass measurements, thus paving the way for higher-precision tests of the Standard Model of particle physics.
△ Less
Submitted 3 June, 2024; v1 submitted 15 March, 2024;
originally announced March 2024.
-
Exploring limits of dipolar quantum simulators with ultracold molecules
Authors:
Yuliya Bilinskaya,
Michael Hughes,
Paolo Molignini
Abstract:
We provide a quantitative blueprint for realizing two-dimensional quantum simulators employing ultracold dipolar molecules or magnetic atoms by studying their accuracy in predicting ground state properties of lattice models with long-range interactions. For experimentally relevant ranges of potential depths, interaction strengths, particle fillings, and geometric configurations, we map out the agr…
▽ More
We provide a quantitative blueprint for realizing two-dimensional quantum simulators employing ultracold dipolar molecules or magnetic atoms by studying their accuracy in predicting ground state properties of lattice models with long-range interactions. For experimentally relevant ranges of potential depths, interaction strengths, particle fillings, and geometric configurations, we map out the agreement between the state prepared in the quantum simulator and the target lattice state. We do so by separately calculating numerically exact many-body wave functions in the continuum and single- or multi-band lattice representations, and building their many-body state overlaps. While the agreement between quantum simulator and single-band models is good for deep optical lattices with weaker interactions and low particle densities, the higher band population rapidly increases for shallow lattices, stronger interactions, and in particular above half filling. This induces drastic changes to the properties of the simulated ground state, potentially leading to false predictions. Furthermore, we show that the interplay between commensurability and interactions can lead to quasidegeneracies, rendering a faithful ground state preparation even more challenging.
△ Less
Submitted 22 February, 2024;
originally announced February 2024.
-
Accuracy of quantum simulators with ultracold dipolar molecules: a quantitative comparison between continuum and lattice descriptions
Authors:
Michael Hughes,
Axel U. J. Lode,
Dieter Jaksch,
Paolo Molignini
Abstract:
With rapid progress in control and manipulation of ultracold magnetic atoms and dipolar molecules, the quantum simulation of lattice models with strongly interacting dipole-dipole interactions (DDI) and high densities is now within experimental reach. This rapid development raises the issue about the validity of quantum simulation in such regimes. In this study, we address this question by perform…
▽ More
With rapid progress in control and manipulation of ultracold magnetic atoms and dipolar molecules, the quantum simulation of lattice models with strongly interacting dipole-dipole interactions (DDI) and high densities is now within experimental reach. This rapid development raises the issue about the validity of quantum simulation in such regimes. In this study, we address this question by performing a full quantitative comparison between the continuum description of a one-dimensional gas of dipolar bosons in an optical lattice, and the single-band Bose-Hubbard lattice model that it quantum simulates. By comparing energies and density distributions, and by calculating direct overlaps between the continuum and lattice many-body wavefunctions, we demonstrate that in regimes of strong DDI and high densities the continuum system fails to recreate the desired lattice model. Two-band Hubbard models become necessary to reduce the discrepancy observed between continuum and lattice descriptions, but appreciable deviations in the density profile still remain. Our study elucidates the role of strong DDI in generating physics beyond lowest-band descriptions and should offer a guideline for the calibration of near-term dipolar quantum simulators.
△ Less
Submitted 9 December, 2022; v1 submitted 17 November, 2022;
originally announced November 2022.
-
Phase diagram and post-quench dynamics in a double spin-chain system in transverse fields
Authors:
Abhishek Agarwal,
Michael Hughes,
Jordi Mur-Petit
Abstract:
We propose and explore the physics of a toy multiferroic model by coupling two distinct dipolar XXZ models in transverse fields. We determine first the rich ground-state phase diagram of the model using density matrix renormalization group techniques. Then, we explore the dynamics of the system after global and local quenches, using the time-evolving block decimation algorithm. After a global quen…
▽ More
We propose and explore the physics of a toy multiferroic model by coupling two distinct dipolar XXZ models in transverse fields. We determine first the rich ground-state phase diagram of the model using density matrix renormalization group techniques. Then, we explore the dynamics of the system after global and local quenches, using the time-evolving block decimation algorithm. After a global quench, the system displays decaying coupled oscillations of the electric and magnetic spins, in agreement with the Eigenstate Thermalization Hypothesis (ETH) for many-body interacting quantum systems. Notably, the spin-spin interactions lead to a sizeable quadratic shift in the oscillation frequency as the inter-chain coupling is increased. Local quenches lead to a light-cone-like propagation of excitations. In this case, the inter-chain coupling drives a transfer of energy between the chains that generates a novel fast spin-wave mode along the 'magnetic' chain at the speed of the 'electric' spin-wave. This suggests a limited control mechanism for faster information transfer in magnetic spin chains using electric fields that harnesses the electric dipoles as intermediaries.
△ Less
Submitted 15 November, 2021;
originally announced November 2021.
-
A robust entangling gate for polar molecules using magnetic and microwave fields
Authors:
Michael Hughes,
Matthew D. Frye,
Rahul Sawant,
Gaurav Bhole,
Jonathan A. Jones,
Simon L. Cornish,
M. R. Tarbutt,
Jeremy M. Hutson,
Dieter Jaksch,
Jordi Mur-Petit
Abstract:
Polar molecules are an emerging platform for quantum technologies based on their long-range electric dipole-dipole interactions, which open new possibilities for quantum information processing and the quantum simulation of strongly correlated systems. Here, we use magnetic and microwave fields to design a fast entangling gate with $>0.999$ fidelity and which is robust with respect to fluctuations…
▽ More
Polar molecules are an emerging platform for quantum technologies based on their long-range electric dipole-dipole interactions, which open new possibilities for quantum information processing and the quantum simulation of strongly correlated systems. Here, we use magnetic and microwave fields to design a fast entangling gate with $>0.999$ fidelity and which is robust with respect to fluctuations in the trap** and control fields and to small thermal excitations. These results establish the feasibility to build a scalable quantum processor with a broad range of molecular species in optical-lattice and optical-tweezers setups.
△ Less
Submitted 5 June, 2020; v1 submitted 19 December, 2019;
originally announced December 2019.
-
Tunable cavity coupling of the zero phonon line of a nitrogen-vacancy defect in diamond
Authors:
S. Johnson,
P. R. Dolan,
T. Grange,
A. A. P. Trichet,
G. Hornecker,
Y. C. Chen,
L. Weng,
G. M. Hughes,
A. Auffèves,
J. M. Smith
Abstract:
We demonstrate the tunable enhancement of the zero phonon line of a single nitrogen-vacancy color center in diamond at cryogenic temperature. An open cavity fabricated using focused ion beam milling provides mode volumes as small as 1.24 $μ$m$^3$. In-situ tuning of the cavity resonance is achieved with piezoelectric actuators. At optimal coupling of the full open cavity the signal from individual…
▽ More
We demonstrate the tunable enhancement of the zero phonon line of a single nitrogen-vacancy color center in diamond at cryogenic temperature. An open cavity fabricated using focused ion beam milling provides mode volumes as small as 1.24 $μ$m$^3$. In-situ tuning of the cavity resonance is achieved with piezoelectric actuators. At optimal coupling of the full open cavity the signal from individual zero phonon line transitions is enhanced by about a factor of 10 and the overall emission rate of the NV$^-$ center is increased by 40% compared with that measured from the same center in the absence of cavity field confinement. This result is important for the realization of efficient spin-photon interfaces and scalable quantum computing using optically addressable solid state spin qubits.
△ Less
Submitted 18 June, 2015; v1 submitted 16 June, 2015;
originally announced June 2015.
-
Increased surface flashover voltage in microfabricated devices
Authors:
R. C. Sterling,
M. D. Hughes,
C. J. Mellor,
W. K. Hensinger
Abstract:
With the demand for improved performance in microfabricated devices, the necessity to apply greater electric fields and voltages becomes evident. When operating in vacuum, the voltage is typically limited by surface flashover forming along the surface of a dielectric. By modifying the fabrication process we have discovered it is possible to more than double the flashover voltage. Our finding has s…
▽ More
With the demand for improved performance in microfabricated devices, the necessity to apply greater electric fields and voltages becomes evident. When operating in vacuum, the voltage is typically limited by surface flashover forming along the surface of a dielectric. By modifying the fabrication process we have discovered it is possible to more than double the flashover voltage. Our finding has significant impact on the realization of next-generation micro- and nano-fabricated devices and for the fabrication of on-chip ion trap arrays for the realization of scalable ion quantum technology.
△ Less
Submitted 25 April, 2014; v1 submitted 28 August, 2012;
originally announced August 2012.
-
Controlling the emission from semiconductor quantum dots using ultra-small tunable optical microcavities
Authors:
Ziyun Di,
Helene V. Jones,
Philip R. Dolan,
Simon M. Fairclough,
Matthew B Wincott,
Johnny Fill,
Gareth M. Hughes,
Jason M. Smith
Abstract:
We report the control of spontaneous emission from CdSe/ZnS core-shell quantum dots coupled to novel open-access optical microcavities. The cavities are fabricated by focused ion beam milling, and provide mode volumes less than a cubic micrometre. The quantum dot emission spectrum, spatial modes, and lifetime are all modified substantially by the presence of the cavity, and can be tuned by activel…
▽ More
We report the control of spontaneous emission from CdSe/ZnS core-shell quantum dots coupled to novel open-access optical microcavities. The cavities are fabricated by focused ion beam milling, and provide mode volumes less than a cubic micrometre. The quantum dot emission spectrum, spatial modes, and lifetime are all modified substantially by the presence of the cavity, and can be tuned by actively varying the cavity length. An increase in emission rate of 75% is achieved at room temperature, attributed to the Purcell effect in the 'bad emitter' regime. We demonstrate a high degree of control over the emission from the dots, including near single-mode operation and the ability to detect strong emission from individual nanocrystals.
△ Less
Submitted 26 June, 2012;
originally announced June 2012.
-
Optimisation of two-dimensional ion trap arrays for quantum simulation
Authors:
James D. Siverns,
Seb Weidt,
Kim Lake,
Bjoern Lekitsch,
Marcus D. Hughes,
Winfried K. Hensinger
Abstract:
The optimisation of two-dimensional (2D) lattice ion trap geometries for trapped ion quantum simulation is investigated. The geometry is optimised for the highest ratio of ion-ion interaction rate to decoherence rate. To calculate the electric field of such array geometries a numerical simulation based on a "Biot-Savart like law" method is used. In this article we will focus on square, hexagonal a…
▽ More
The optimisation of two-dimensional (2D) lattice ion trap geometries for trapped ion quantum simulation is investigated. The geometry is optimised for the highest ratio of ion-ion interaction rate to decoherence rate. To calculate the electric field of such array geometries a numerical simulation based on a "Biot-Savart like law" method is used. In this article we will focus on square, hexagonal and centre rectangular lattices for optimisation. A method for maximising the homogeneity of trap** site properties over an array is presented for arrays of a range of sizes. We show how both the polygon radii and separations scale to optimise the ratio between the interaction and decoherence rate. The optimal polygon radius and separation for a 2D lattice is found to be a function of the ratio between rf voltage and drive frequency applied to the array. We then provide a case study for 171Yb+ ions to show how a two-dimensional quantum simulator array could be designed.
△ Less
Submitted 19 June, 2012; v1 submitted 19 March, 2012;
originally announced March 2012.
-
Microfabricated Ion Traps
Authors:
Marcus D. Hughes,
Bjoern Lekitsch,
Jiddu A. Broersma,
Winfried K. Hensinger
Abstract:
Ion traps offer the opportunity to study fundamental quantum systems with high level of accuracy highly decoupled from the environment. Individual atomic ions can be controlled and manipulated with electric fields, cooled to the ground state of motion with laser cooling and coherently manipulated using optical and microwave radiation. Microfabricated ion traps hold the advantage of allowing for sm…
▽ More
Ion traps offer the opportunity to study fundamental quantum systems with high level of accuracy highly decoupled from the environment. Individual atomic ions can be controlled and manipulated with electric fields, cooled to the ground state of motion with laser cooling and coherently manipulated using optical and microwave radiation. Microfabricated ion traps hold the advantage of allowing for smaller trap dimensions and better scalability towards large ion trap arrays also making them a vital ingredient for next generation quantum technologies. Here we provide an introduction into the principles and operation of microfabricated ion traps. We show an overview of material and electrical considerations which are vital for the design of such trap structures. We provide guidance in how to choose the appropriate fabrication design, consider different methods for the fabrication of microfabricated ion traps and discuss previously realized structures. We also discuss the phenomenon of anomalous heating of ions within ion traps, which becomes an important factor in the miniaturization of ion traps.
△ Less
Submitted 28 June, 2011; v1 submitted 17 January, 2011;
originally announced January 2011.
-
Versatile ytterbium ion trap experiment for operation of scalable ion trap chips with motional heating and transition frequency measurements
Authors:
James J. McLoughlin,
Altaf H. Nizamani,
James D. Siverns,
Robin C. Sterling,
Marcus D. Hughes,
Bjoern Lekitsch,
Björn Stein,
Seb Weidt,
Winfried K. Hensinger
Abstract:
We present the design and operation of an ytterbium ion trap experiment with a setup offering versatile optical access and 90 electrical inter-connects that can host advanced surface and multi-layer ion trap chips mounted on chip carriers. We operate a macroscopic ion trap compatible with this chip carrier design and characterise its performance, demonstrating secular frequencies >1 MHz, and trap…
▽ More
We present the design and operation of an ytterbium ion trap experiment with a setup offering versatile optical access and 90 electrical inter-connects that can host advanced surface and multi-layer ion trap chips mounted on chip carriers. We operate a macroscopic ion trap compatible with this chip carrier design and characterise its performance, demonstrating secular frequencies >1 MHz, and trap and cool nearly all of the stable isotopes, including 171Yb+ ions, as well as ion crystals. For this particular tap we measure the motional heating rate, <n-dot>, and observe a <n-dot> proportional to 1/omega^2 behaviour for different secular frequencies, omega. We also determine a spectral noise density S_E(1 MHz) = 3.6(9)x10^-11 V^2 m^-2 Hz^-1 at an ion electrode spacing of 310(10) mu m. We describe the experimental setup for trap** and cooling Yb+ ions and provide frequency measurements of the 2S_1/2 - 2P_1/2 and 2D_3/2 - 3D[3/2]_1/2 transitions for the stable 170Yb+, 171Yb+, 172Yb+, 174Yb+ and 176Yb+ isotopes which are more precise than previously published work.
△ Less
Submitted 17 December, 2010; v1 submitted 22 July, 2010;
originally announced July 2010.
