-
Cryogenic single-port calibration for superconducting microwave resonator measurements
Authors:
Haozhi Wang,
S. Singh,
C. R. H. McRae,
J. C. Bardin,
S. -X. Lin,
N. Messaoudi,
A. R. Castelli,
Y. J. Rosen,
E. T. Holland,
D. P. Pappas,
J. Y. Mutus
Abstract:
Superconducting circuit testing and materials loss characterization requires robust and reliable methods for the extraction of internal and coupling quality factors of microwave resonators. A common method, imposed by limitations on the device design or experimental configuration, is the single-port reflection geometry, i.e. reflection-mode. However, impedance mismatches in cryogenic systems must…
▽ More
Superconducting circuit testing and materials loss characterization requires robust and reliable methods for the extraction of internal and coupling quality factors of microwave resonators. A common method, imposed by limitations on the device design or experimental configuration, is the single-port reflection geometry, i.e. reflection-mode. However, impedance mismatches in cryogenic systems must be accounted for through calibration of the measurement chain while it is at low temperatures. In this paper, we demonstrate a data-based, single-port calibration using commercial microwave standards and a vector network analyzer (VNA) with samples at millikelvin temperature in a dilution refrigerator, making this method useful for measurements of quantum phenomena. Finally, we cross reference our data-based, single-port calibration and reflection measurement with over-coupled 2D- and 3D-resonators against well established two-port techniques corroborating the validity of our method.
△ Less
Submitted 2 March, 2021;
originally announced March 2021.
-
Impacts of Noise and Structure on Quantum Information Encoded in a Quantum Memory
Authors:
Matthew Otten,
Keshav Kapoor,
A. Barış Özgüler,
Eric T. Holland,
James B. Kowalkowski,
Yuri Alexeev,
Adam L. Lyon
Abstract:
As larger, higher-quality quantum devices are built and demonstrated in quantum information applications, such as quantum computation and quantum communication, the need for high-quality quantum memories to store quantum states becomes ever more pressing. Future quantum devices likely will use a variety of physical hardware, some being used primarily for processing of quantum information and other…
▽ More
As larger, higher-quality quantum devices are built and demonstrated in quantum information applications, such as quantum computation and quantum communication, the need for high-quality quantum memories to store quantum states becomes ever more pressing. Future quantum devices likely will use a variety of physical hardware, some being used primarily for processing of quantum information and others for storage. Here, we study the correlation of the structure of quantum information with physical noise models of various possible quantum memory implementations. Through numerical simulation of different noise models and approximate analytical formulas applied to a variety of interesting quantum states, we provide comparisons between quantum hardware with different structure, including both qubit- and qudit-based quantum memories. Our findings point to simple, experimentally relevant formulas for the relative lifetimes of quantum information in different quantum memories and have relevance to the design of hybrid quantum devices.
△ Less
Submitted 8 July, 2021; v1 submitted 26 November, 2020;
originally announced November 2020.
-
Optimal Control for the Quantum Simulation of Nuclear Dynamics
Authors:
Eric T. Holland,
Kyle A. Wendt,
Konstantinos Kravvaris,
Xian Wu,
W. Erich Ormand,
Jonathan L DuBois,
Sofia Quaglioni,
Francesco Pederiva
Abstract:
We propose a method for enacting the unitary time propagation of two interacting neutrons at leading order of chiral effective field theory by efficiently encoding the nuclear dynamics into a single multi-level quantum device. The emulated output of the quantum simulation shows that, by applying a single gate that draws on the underlying characteristics of the device, it is possible to observe mul…
▽ More
We propose a method for enacting the unitary time propagation of two interacting neutrons at leading order of chiral effective field theory by efficiently encoding the nuclear dynamics into a single multi-level quantum device. The emulated output of the quantum simulation shows that, by applying a single gate that draws on the underlying characteristics of the device, it is possible to observe multiple cycles of the nucleons' dynamics before the onset of decoherence. Owing to the signal's longevity, we can then extract spectroscopic properties of the simulated nuclear system. This allows us to validate the encoding of the nuclear Hamiltonian and the robustness of the simulation in the presence of quantum-hardware noise by comparing the extracted spectroscopic information to exact calculations. This work paves the way for transformative calculations of dynamical properties of nuclei on near-term quantum devices.
△ Less
Submitted 22 August, 2019;
originally announced August 2019.
-
Protecting superconducting qubits from phonon mediated decay
Authors:
Yaniv J. Rosen,
Matthew Horsley,
Sara E. Harrison,
Eric T. Holland,
Allan S. Chang,
Tiziana Bond,
Jonathan L DuBois
Abstract:
For quantum computing to become fault tolerant, the underlying quantum bits must be effectively isolated from the noisy environment. It is well known that including an electromagnetic bandgap around the qubit operating frequency improves coherence for superconducting circuits. However, investigations of bandgaps to other environmental coupling mechanisms remain largely unexplored. Here we present…
▽ More
For quantum computing to become fault tolerant, the underlying quantum bits must be effectively isolated from the noisy environment. It is well known that including an electromagnetic bandgap around the qubit operating frequency improves coherence for superconducting circuits. However, investigations of bandgaps to other environmental coupling mechanisms remain largely unexplored. Here we present a method to enhance the coherence of superconducting circuits by introducing a phononic bandgap around the device operating frequency. The phononic bandgaps block resonant decay of defect states within the gapped frequency range, removing the electromagnetic coupling to phonons at the gap frequencies. We construct a multi-scale model that derives the decrease in the density of states due to the bandgap and the resulting increase in defect state $T_1$ times. We demonstrate that emission rates from in-plane defect states can be suppressed by up to two orders of magnitude. We combine these simulations with theory for resonators operated in the continuous-wave regime and show that improvements in quality factors are expected by up to the enhancement in defect $T_1$ times. Furthermore, we use full master equation simulation to demonstrate the suppression of qubit energy relaxation even when interacting with 200 defects states. We conclude with an exploration of device implementation including tradeoffs between fabrication complexity and qubit performance.
△ Less
Submitted 1 May, 2019; v1 submitted 14 March, 2019;
originally announced March 2019.
-
Development of transmon qubits solely from optical lithography on 300mm wafers
Authors:
N. Foroozani,
C. Hobbs,
C. C. Hung,
S. Olson,
D. Ashworth,
E. Holland,
M. Malloy,
P. Kearney,
B. O'Brien,
B. Bunday,
D. DiPaola,
W. Advocate,
T. Murray,
P. Hansen,
S. Novak,
S. Bennett,
M. Rodgers,
B. Baker-O'Neal,
B. Sapp,
E. Barth,
J. Hedrick,
R. Goldblatt,
S. S. Papa Rao,
K. D. Osborn
Abstract:
Qubit information processors are increasing in footprint but currently rely on e-beam lithography for patterning the required Josephson junctions (JJs). Advanced optical lithography is an alternative patterning method, and we report on the development of transmon qubits patterned solely with optical lithography. The lithography uses 193 nm wavelength exposure and 300-mm large silicon wafers. Qubit…
▽ More
Qubit information processors are increasing in footprint but currently rely on e-beam lithography for patterning the required Josephson junctions (JJs). Advanced optical lithography is an alternative patterning method, and we report on the development of transmon qubits patterned solely with optical lithography. The lithography uses 193 nm wavelength exposure and 300-mm large silicon wafers. Qubits and arrays of evaluation JJs were patterned with process control which resulted in narrow feature distributions: a standard deviation of 0:78% for a 220 nm linewidth pattern realized across over half the width of the wafers. Room temperature evaluation found a 2.8-3.6% standard deviation in JJ resistance in completed chips. The qubits used aluminum and titanium nitride films on silicon substrates without substantial silicon etching. T1 times of the qubits were extracted at 26 - 27 microseconds, indicating a low level of material-based qubit defects. This study shows that large wafer optical lithography on silicon is adequate for high-quality transmon qubits, and shows a promising path for improving many-qubit processors.
△ Less
Submitted 22 February, 2019;
originally announced February 2019.
-
Pareto-Efficient Quantum Circuit Simulation Using Tensor Contraction Deferral
Authors:
Edwin Pednault,
John A. Gunnels,
Giacomo Nannicini,
Lior Horesh,
Thomas Magerlein,
Edgar Solomonik,
Erik W. Draeger,
Eric T. Holland,
Robert Wisnieff
Abstract:
With the current rate of progress in quantum computing technologies, systems with more than 50 qubits will soon become reality. Computing ideal quantum state amplitudes for circuits of such and larger sizes is a fundamental step to assess both the correctness, performance, and scaling behavior of quantum algorithms and the fidelities of quantum devices. However, resource requirements for such calc…
▽ More
With the current rate of progress in quantum computing technologies, systems with more than 50 qubits will soon become reality. Computing ideal quantum state amplitudes for circuits of such and larger sizes is a fundamental step to assess both the correctness, performance, and scaling behavior of quantum algorithms and the fidelities of quantum devices. However, resource requirements for such calculations on classical computers grow exponentially. We show that deferring tensor contractions can extend the boundaries of what can be computed on classical systems. To demonstrate this technique, we present results obtained from a calculation of the complete set of output amplitudes of a universal random circuit with depth 27 in a 2D lattice of $7 \times 7$ qubits, and an arbitrarily selected slice of $2^{37}$ amplitudes of a universal random circuit with depth 23 in a 2D lattice of $8 \times 7$ qubits. Combining our methodology with other decomposition approaches found in the literature, we show that we can simulate $7 \times 7$-qubit random circuits to arbitrary depth by leveraging secondary storage. These calculations were thought to be impossible due to resource requirements.
△ Less
Submitted 27 August, 2020; v1 submitted 16 October, 2017;
originally announced October 2017.
-
A quantum memory with near-millisecond coherence in circuit QED
Authors:
Matthew Reagor,
Wolfgang Pfaff,
Christopher Axline,
Reinier W. Heeres,
Nissim Ofek,
Katrina Sliwa,
Eric Holland,
Chen Wang,
Jacob Blumoff,
Kevin Chou,
Michael J. Hatridge,
Luigi Frunzio,
Michel H. Devoret,
Liang Jiang,
Robert J. Schoelkopf
Abstract:
Significant advances in coherence have made superconducting quantum circuits a viable platform for fault-tolerant quantum computing. To further extend capabilities, highly coherent quantum systems could act as quantum memories for these circuits. A useful quantum memory must be rapidly addressable by qubits, while maintaining superior coherence. We demonstrate a novel superconducting microwave cav…
▽ More
Significant advances in coherence have made superconducting quantum circuits a viable platform for fault-tolerant quantum computing. To further extend capabilities, highly coherent quantum systems could act as quantum memories for these circuits. A useful quantum memory must be rapidly addressable by qubits, while maintaining superior coherence. We demonstrate a novel superconducting microwave cavity architecture that is highly robust against major sources of loss that are encountered in the engineering of circuit QED systems. The architecture allows for near-millisecond storage of quantum states in a resonator while strong coupling between the resonator and a transmon qubit enables control, encoding, and readout at MHz rates. The observed coherence times constitute an improvement of almost an order of magnitude over those of the best available superconducting qubits. Our design is an ideal platform for studying coherent quantum optics and marks an important step towards hardware-efficient quantum computing with Josephson junction-based quantum circuits.
△ Less
Submitted 25 August, 2015; v1 submitted 24 August, 2015;
originally announced August 2015.
-
Single-photon Resolved Cross-Kerr Interaction for Autonomous Stabilization of Photon-number States
Authors:
E. T. Holland,
B. Vlastakis,
R. W. Heeres,
M. J. Reagor,
U. Vool,
Z. Leghtas,
L. Frunzio,
G. Kirchmair,
M. H. Devoret,
M. Mirrahimi,
R. J. Schoelkopf
Abstract:
Quantum states can be stabilized in the presence of intrinsic and environmental losses by either applying active feedback conditioned on an ancillary system or through reservoir engineering. Reservoir engineering maintains a desired quantum state through a combination of drives and designed entropy evacuation. We propose and implement a quantum reservoir engineering protocol that stabilizes Fock s…
▽ More
Quantum states can be stabilized in the presence of intrinsic and environmental losses by either applying active feedback conditioned on an ancillary system or through reservoir engineering. Reservoir engineering maintains a desired quantum state through a combination of drives and designed entropy evacuation. We propose and implement a quantum reservoir engineering protocol that stabilizes Fock states in a microwave cavity. This protocol is realized with a circuit quantum electrodynamics platform where a Josephson junction provides direct, nonlinear coupling between two superconducting waveguide cavities. The nonlinear coupling results in a single photon resolved cross-Kerr effect between the two cavities enabling a photon number dependent coupling to a lossy environment. The quantum state of the microwave cavity is discussed in terms of a net polarization and is analyzed by a measurement of its steady state Wigner function.
△ Less
Submitted 13 April, 2015;
originally announced April 2015.
-
Cavity State Manipulation Using Photon-Number Selective Phase Gates
Authors:
Reinier W. Heeres,
Brian Vlastakis,
Eric Holland,
Stefan Krastanov,
Victor V. Albert,
Luigi Frunzio,
Liang Jiang,
Robert J. Schoelkopf
Abstract:
The large available Hilbert space and high coherence of cavity resonators makes these systems an interesting resource for storing encoded quantum bits. To perform a quantum gate on this encoded information, however, complex nonlinear operations must be applied to the many levels of the oscillator simultaneously. In this work, we introduce the Selective Number-dependent Arbitrary Phase (SNAP) gate,…
▽ More
The large available Hilbert space and high coherence of cavity resonators makes these systems an interesting resource for storing encoded quantum bits. To perform a quantum gate on this encoded information, however, complex nonlinear operations must be applied to the many levels of the oscillator simultaneously. In this work, we introduce the Selective Number-dependent Arbitrary Phase (SNAP) gate, which imparts a different phase to each Fock state component using an off-resonantly coupled qubit. We show that the SNAP gate allows control over the quantum phases by correcting the unwanted phase evolution due to the Kerr effect. Furthermore, by combining the SNAP gate with oscillator displacements, we create a one-photon Fock state with high fidelity. Using just these two controls, one can construct arbitrary unitary operations, offering a scalable route to performing logical manipulations on oscillator-encoded qubits.
△ Less
Submitted 4 March, 2015;
originally announced March 2015.
-
Reaching 10 ms single photon lifetimes for superconducting aluminum cavities
Authors:
M. Reagor,
Hanhee Paik,
G. Catelani,
L. Sun,
C. Axline,
E. Holland,
I. M. Pop,
N. A. Masluk,
T. Brecht,
L. Frunzio,
M. H. Devoret,
L. I. Glazman,
R. J. Schoelkopf
Abstract:
Three-dimensional microwave cavities have recently been combined with superconducting qubits in the circuit quantum electrodynamics (cQED) architecture. These cavities should have less sensitivity to dielectric and conductor losses at surfaces and interfaces, which currently limit the performance of planar resonators. We expect that significantly (>10^3) higher quality factors and longer lifetimes…
▽ More
Three-dimensional microwave cavities have recently been combined with superconducting qubits in the circuit quantum electrodynamics (cQED) architecture. These cavities should have less sensitivity to dielectric and conductor losses at surfaces and interfaces, which currently limit the performance of planar resonators. We expect that significantly (>10^3) higher quality factors and longer lifetimes should be achievable for 3D structures. Motivated by this principle, we have reached internal quality factors greater than 0.5x10^9 and intrinsic lifetimes of 0.01 seconds for multiple aluminum superconducting cavity resonators at single photon energies and millikelvin temperatures. These improvements could enable long lived quantum memories with submicrosecond access times when strongly coupled to superconducting qubits.
△ Less
Submitted 22 May, 2013; v1 submitted 18 February, 2013;
originally announced February 2013.