-
Quantum Sensors for High Energy Physics
Authors:
Aaron Chou,
Kent Irwin,
Reina H. Maruyama,
Oliver K. Baker,
Chelsea Bartram,
Karl K. Berggren,
Gustavo Cancelo,
Daniel Carney,
Clarence L. Chang,
Hsiao-Mei Cho,
Maurice Garcia-Sciveres,
Peter W. Graham,
Salman Habib,
Roni Harnik,
J. G. E. Harris,
Scott A. Hertel,
David B. Hume,
Rakshya Khatiwada,
Timothy L. Kovachy,
Noah Kurinsky,
Steve K. Lamoreaux,
Konrad W. Lehnert,
David R. Leibrandt,
Dale Li,
Ben Loer
, et al. (17 additional authors not shown)
Abstract:
Strong motivation for investing in quantum sensing arises from the need to investigate phenomena that are very weakly coupled to the matter and fields well described by the Standard Model. These can be related to the problems of dark matter, dark sectors not necessarily related to dark matter (for example sterile neutrinos), dark energy and gravity, fundamental constants, and problems with the Sta…
▽ More
Strong motivation for investing in quantum sensing arises from the need to investigate phenomena that are very weakly coupled to the matter and fields well described by the Standard Model. These can be related to the problems of dark matter, dark sectors not necessarily related to dark matter (for example sterile neutrinos), dark energy and gravity, fundamental constants, and problems with the Standard Model itself including the Strong CP problem in QCD. Resulting experimental needs typically involve the measurement of very low energy impulses or low power periodic signals that are normally buried under large backgrounds. This report documents the findings of the 2023 Quantum Sensors for High Energy Physics workshop which identified enabling quantum information science technologies that could be utilized in future particle physics experiments, targeting high energy physics science goals.
△ Less
Submitted 3 November, 2023;
originally announced November 2023.
-
A proposal for detecting the spin of a single electron in superfluid helium
Authors:
**yong Ma,
Y. S. S. Patil,
Jiaxin Yu,
Yiqi Wang,
J. G. E. Harris
Abstract:
The electron bubble in superfluid helium has two degrees of freedom that may offer exceptionally low dissipation: the electron's spin and the bubble's motion. If these degrees of freedom can be read out and controlled with sufficient sensitivity, they would provide a novel platform for realizing a range of quantum technologies and for exploring open questions in the physics of superfluid helium. H…
▽ More
The electron bubble in superfluid helium has two degrees of freedom that may offer exceptionally low dissipation: the electron's spin and the bubble's motion. If these degrees of freedom can be read out and controlled with sufficient sensitivity, they would provide a novel platform for realizing a range of quantum technologies and for exploring open questions in the physics of superfluid helium. Here we propose a practical scheme for accomplishing this by trap** an electron bubble inside a superfluid-filled opto-acoustic cavity.
△ Less
Submitted 17 June, 2024; v1 submitted 14 August, 2023;
originally announced August 2023.
-
Resolving the topology of encircling multiple exceptional points
Authors:
Chitres Guria,
Qi Zhong,
Sahin K. Ozdemir,
Yogesh S. S. Patil,
Ramy El-Ganainy,
Jack G. E. Harris
Abstract:
Non-Hermiticity has emerged as a new paradigm for controlling coupled-mode systems in ways that cannot be achieved with conventional techniques. One aspect of this control that has received considerable attention recently is the encircling of exceptional points (EPs). To date, most work has focused on systems consisting of two modes that are tuned by two control parameters and have isolated EPs. W…
▽ More
Non-Hermiticity has emerged as a new paradigm for controlling coupled-mode systems in ways that cannot be achieved with conventional techniques. One aspect of this control that has received considerable attention recently is the encircling of exceptional points (EPs). To date, most work has focused on systems consisting of two modes that are tuned by two control parameters and have isolated EPs. While these systems exhibit exotic features related to EP encircling, it has been shown that richer behavior occurs in systems with more than two modes. Such systems can be tuned by more than two control parameters, and contain EPs that form a knot-like structure. Control loops that encircle this structure cause the system's eigenvalues to trace out non-commutative braids. Here we consider a hybrid scenario: a three-mode system with just two control parameters. We describe the relationship between control loops and their topology in the full and two-dimensional parameter space. We demonstrate this relationship experimentally using a three-mode mechanical system in which the control parameters are provided by optomechanical interaction with a high-finesse optical cavity.
△ Less
Submitted 16 February, 2024; v1 submitted 6 April, 2023;
originally announced April 2023.
-
Measuring High-Order Phonon Correlations in an Optomechanical Resonator
Authors:
Yogesh S. S. Patil,
Jiaxin Yu,
Sean Frazier,
Yiqi Wang,
Kale Johnson,
Jared Fox,
Jakob Reichel,
Jack G. E. Harris
Abstract:
We use single photon detectors to probe the motional state of a superfluid $^4$He resonator of mass $\sim1$ ng. The arrival times of Stokes and anti-Stokes photons (scattered by the resonator's acoustic mode) are used to measure the resonator's phonon coherences up to the fourth order. By post-selecting on photon detection events, we also measure coherences in the resonator when $\leq3$ phonons ha…
▽ More
We use single photon detectors to probe the motional state of a superfluid $^4$He resonator of mass $\sim1$ ng. The arrival times of Stokes and anti-Stokes photons (scattered by the resonator's acoustic mode) are used to measure the resonator's phonon coherences up to the fourth order. By post-selecting on photon detection events, we also measure coherences in the resonator when $\leq3$ phonons have been added or subtracted. These measurements are found to be consistent with predictions that assume the acoustic mode to be in thermal equilibrium with a bath through a Markovian coupling.
△ Less
Submitted 18 January, 2022;
originally announced January 2022.
-
Measuring the knot of non-Hermitian degeneracies and non-commuting braids
Authors:
Yogesh S. S. Patil,
Judith Höller,
Parker A. Henry,
Chitres Guria,
Yiming Zhang,
Luyao Jiang,
Nenad Kralj,
Nicholas Read,
Jack G. E. Harris
Abstract:
Any system of coupled oscillators may be characterized by its spectrum of resonance frequencies (or eigenfrequencies), which can be tuned by varying the system's parameters. The relationship between control parameters and the eigenfrequency spectrum is central to a range of applications. However, fundamental aspects of this relationship remain poorly understood. For example, if the controls are va…
▽ More
Any system of coupled oscillators may be characterized by its spectrum of resonance frequencies (or eigenfrequencies), which can be tuned by varying the system's parameters. The relationship between control parameters and the eigenfrequency spectrum is central to a range of applications. However, fundamental aspects of this relationship remain poorly understood. For example, if the controls are varied along a path that returns to its starting point (i.e., around a "loop"), the system's spectrum must return to itself. In systems that are Hermitian (i.e., lossless and reciprocal) this process is trivial, and each resonance frequency returns to its original value. However, in non-Hermitian systems, where the eigenfrequencies are complex, the spectrum may return to itself in a topologically non-trivial manner, a phenomenon known as spectral flow. The spectral flow is determined by how the control loop encircles degeneracies, and this relationship is well understood for $N=2$ (where $N$ is the number of oscillators in the system). Here we extend this description to arbitrary $N$. We show that control loops generically produce braids of eigenfrequencies, and for $N>2$ these braids form a non-Abelian group which reflects the non-trivial geometry of the space of degeneracies. We demonstrate these features experimentally for $N=3$ using a cavity optomechanical system.
△ Less
Submitted 15 July, 2022; v1 submitted 30 November, 2021;
originally announced December 2021.
-
Nonclassical photon statistics in two-tone continuously driven optomechanics
Authors:
K. Borkje,
F. Massel,
J. G. E. Harris
Abstract:
In cavity optomechanics, single photon detection of Raman scattered photons can be a useful tool for observing nonclassical features of both radiation and motion. While this tool has been employed in experiments with pulsed laser driving of a cavity mode, it has not been readily accessible to experiments with continuous and constant laser driving. To address this, we present a study of a standard…
▽ More
In cavity optomechanics, single photon detection of Raman scattered photons can be a useful tool for observing nonclassical features of both radiation and motion. While this tool has been employed in experiments with pulsed laser driving of a cavity mode, it has not been readily accessible to experiments with continuous and constant laser driving. To address this, we present a study of a standard optomechanical system where the cavity mode is continuously driven at two different frequencies, and where sideband photons are detected by single photon detectors after frequency filtering the output from the cavity mode around its resonance frequency. We first derive the normalized second order coherence associated with the detected photons, and show that it contains signatures of the quantum nature of the mechanical mode which would be absent with only single-tone driving. To identify model-independent nonclassical features, we derive two inequalities for the sideband photon statistics that should be valid in any classical model of the system. We show that these inequalities are violated in the proposed setup. This is provided that the average phonon occupation number of the mechanical mode is sufficiently small, which in principle can be achieved through sideband cooling intrinsic to the setup. Violation of the first inequality means that there is no well-defined probability distribution of the Glauber-Sudarshan type for the cavity mode. In contrast, a violation of the second inequality means that there is no joint probability distribution for the cavity mode at two times separated by a finite interval, which originates from the noncommutativity of the motional quadratures of the mechanical mode. The proposed setup thus employs a mechanical oscillator in order to generate a steady-state source of nonclassical radiation.
△ Less
Submitted 8 December, 2021; v1 submitted 24 August, 2021;
originally announced August 2021.
-
Mechanical Quantum Sensing in the Search for Dark Matter
Authors:
Daniel Carney,
Gordan Krnjaic,
David C. Moore,
Cindy A. Regal,
Gadi Afek,
Sunil Bhave,
Benjamin Brubaker,
Thomas Corbitt,
Jonathan Cripe,
Nicole Crisosto,
Andrew Geraci,
Sohitri Ghosh,
Jack G. E. Harris,
Anson Hook,
Edward W. Kolb,
Jonathan Kunjummen,
Rafael F. Lang,
Tongcang Li,
Tongyan Lin,
Zhen Liu,
Joseph Lykken,
Lorenzo Magrini,
Jack Manley,
Nobuyuki Matsumoto,
Alissa Monte
, et al. (10 additional authors not shown)
Abstract:
Numerous astrophysical and cosmological observations are best explained by the existence of dark matter, a mass density which interacts only very weakly with visible, baryonic matter. Searching for the extremely weak signals produced by this dark matter strongly motivate the development of new, ultra-sensitive detector technologies. Paradigmatic advances in the control and readout of massive mecha…
▽ More
Numerous astrophysical and cosmological observations are best explained by the existence of dark matter, a mass density which interacts only very weakly with visible, baryonic matter. Searching for the extremely weak signals produced by this dark matter strongly motivate the development of new, ultra-sensitive detector technologies. Paradigmatic advances in the control and readout of massive mechanical systems, in both the classical and quantum regimes, have enabled unprecedented levels of sensitivity. In this white paper, we outline recent ideas in the potential use of a range of solid-state mechanical sensing technologies to aid in the search for dark matter in a number of energy scales and with a variety of coupling mechanisms.
△ Less
Submitted 13 August, 2020;
originally announced August 2020.
-
Non-Hermitian adiabatic transport in spaces of exceptional points
Authors:
J. Höller,
N. Read,
J. G. E. Harris
Abstract:
We consider the space of $n \times n$ non-Hermitian Hamiltonians ($n=2$, $3$, . . .) that are equivalent to a single $n\times n$ Jordan block. We focus on adiabatic transport around a closed path (i.e. a loop) within this space, in the limit as the time-scale $T=1/\varepsilon$ taken to traverse the loop tends to infinity. We show that, for a certain class of loops and a choice of initial state, th…
▽ More
We consider the space of $n \times n$ non-Hermitian Hamiltonians ($n=2$, $3$, . . .) that are equivalent to a single $n\times n$ Jordan block. We focus on adiabatic transport around a closed path (i.e. a loop) within this space, in the limit as the time-scale $T=1/\varepsilon$ taken to traverse the loop tends to infinity. We show that, for a certain class of loops and a choice of initial state, the state returns to itself and acquires a complex phase that is $\varepsilon^{-1}$ times an expansion in powers of $\varepsilon^{1/n}$. The exponential of the term of $n$th order (which is equivalent to the "geometric" or Berry phase modulo $2π$), is thus independent of $\varepsilon$ as $\varepsilon\to0$; it depends only on the homotopy class of the loop and is an integer power of $e^{2πi/n}$. One of the conditions under which these results hold is that the state being transported is, for all points on the loop, that of slowest decay.
△ Less
Submitted 16 September, 2020; v1 submitted 14 September, 2018;
originally announced September 2018.
-
Nonreciprocal control and cooling of phonon modes in an optomechanical system
Authors:
H. Xu,
Luyao Jiang,
A. A. Clerk,
J. G. E. Harris
Abstract:
Phononic resonators play important roles in settings that range from gravitational wave detectors to cellular telephones. They serve as high-performance transducers, sensors, and filters by offering low dissipation, tunable coupling to diverse physical systems, and compatibility with a wide range of frequencies, materials, and fabrication processes. Systems of phononic resonators typically obey re…
▽ More
Phononic resonators play important roles in settings that range from gravitational wave detectors to cellular telephones. They serve as high-performance transducers, sensors, and filters by offering low dissipation, tunable coupling to diverse physical systems, and compatibility with a wide range of frequencies, materials, and fabrication processes. Systems of phononic resonators typically obey reciprocity, which ensures that the phonon transmission coefficient between any two resonators is independent of the direction of transmission. Reciprocity must be broken to realize devices (such as isolators and circulators) that provide one-way propagation of acoustic energy between resonators. Such devices are crucial for protecting active elements, mitigating noise, and operating full-duplex transceivers. To date, nonreciprocal phononic devices have not combined the features necessary for robust operation: strong nonreciprocity, in situ tunability, compact integration, and continuous operation. Furthermore, they have been applied only to coherent signals (rather than fluctuations or noise), and have been realized exclusively in travelling-wave systems (rather than resonators). Here we describe a cavity optomechanical scheme that produces robust nonreciprocal coupling between phononic resonators. This scheme provides ~ 30 dB of isolation and can be tuned in situ simply via the phases of the drive tones applied to the cavity. In addition, by directly monitoring the resonators' dynamics we show that this nonreciprocity can be used to control thermal fluctuations, and that this control represents a new resource for cooling phononic resonators.
△ Less
Submitted 10 July, 2018;
originally announced July 2018.
-
Quantum optomechanics in a liquid
Authors:
A. B. Shkarin,
A. D. Kashkanova,
C. D. Brown,
S. Garcia,
K. Ott,
J. Reichel,
J. G. E. Harris
Abstract:
Optomechanical systems provide a means for studying and controlling quantum effects in the motion of macroscopic objects. To date, quantum optomechanical effects have been studied in objects made from solids and gases. Here we describe measurements of quantum behavior in the vibrations of a liquid body. Specifically, we monitor the fluctuations of an individual acoustic standing wave in superfluid…
▽ More
Optomechanical systems provide a means for studying and controlling quantum effects in the motion of macroscopic objects. To date, quantum optomechanical effects have been studied in objects made from solids and gases. Here we describe measurements of quantum behavior in the vibrations of a liquid body. Specifically, we monitor the fluctuations of an individual acoustic standing wave in superfluid liquid helium, and find that it displays the characteristic signatures of zero-point motion and measurement back-action. This opens the possibility of exploiting the properties of liquids in general (and superfluid helium in particular) to access qualitatively new regimes of quantum optomechanics.
△ Less
Submitted 8 September, 2017;
originally announced September 2017.
-
Cavity Optomechanics in a Levitated Helium Drop
Authors:
L. Childress,
M. P. Schmidt,
A. D. Kashkanova,
C. D. Brown,
G. I. Harris,
A. Aiello,
F. Marquardt,
J. G. E. Harris
Abstract:
We describe a proposal for a new type of optomechanical system based on a drop of liquid helium that is magnetically levitated in vacuum. In the proposed device, the drop would serve three roles: its optical whispering gallery modes would provide the optical cavity, its surface vibrations would constitute the mechanical element, and evaporation of He atoms from its surface would provide continuous…
▽ More
We describe a proposal for a new type of optomechanical system based on a drop of liquid helium that is magnetically levitated in vacuum. In the proposed device, the drop would serve three roles: its optical whispering gallery modes would provide the optical cavity, its surface vibrations would constitute the mechanical element, and evaporation of He atoms from its surface would provide continuous refrigeration. We analyze the feasibility of such a system in light of previous experimental demonstrations of its essential components: magnetic levitation of mm-scale and cm-scale drops of liquid He, evaporative cooling of He droplets in vacuum, and coupling to high-quality optical whispering gallery modes in a wide range of liquids. We find that the combination of these features could result in a device that approaches the single-photon strong coupling regime, due to the high optical quality factors attainable at low temperatures. Moreover, the system offers a unique opportunity to use optical techniques to study the motion of a superfluid that is freely levitating in vacuum (in the case of $^{4}\mathrm {He}$). Alternatively, for a normal fluid drop of $^3 \mathrm{He}$, we propose to exploit the coupling between the drop's rotations and vibrations to perform quantum non-demolition measurements of angular momentum.
△ Less
Submitted 5 August, 2017;
originally announced August 2017.
-
Topological energy transfer in an optomechanical system with exceptional points
Authors:
H. Xu,
D. Mason,
L. Jiang,
J. G. E. Harris
Abstract:
Topological operations have the merit of achieving certain goals without requiring accurate control over local operational details. To date, topological operations have been used to control geometric phases, and have been proposed as a means for controlling the state of certain systems within their degenerate subspaces[1-8]. More recently, it was predicted that topological operations can be extend…
▽ More
Topological operations have the merit of achieving certain goals without requiring accurate control over local operational details. To date, topological operations have been used to control geometric phases, and have been proposed as a means for controlling the state of certain systems within their degenerate subspaces[1-8]. More recently, it was predicted that topological operations can be extended to transfer energy between normal modes, provided that the system possesses a specific type of degeneracy known as an exceptional point (EP)[9-11]. Here we demonstrate the transfer of energy between two modes of a cryogenic optomechanical device by topological operations. We show that this transfer arises from the presence of an EP in the device's spectrum. We also show that this transfer is non-reciprocal[12-14]. These results open new directions in system control; they also open the possibility of exploring other dynamical effects related to EPs[15,16], as well as the behavior of thermal and quantum fluctuations in the vicinity of EPs.
△ Less
Submitted 28 March, 2016; v1 submitted 22 February, 2016;
originally announced February 2016.
-
Superfluid Brillouin Optomechanics
Authors:
A. D. Kashkanova,
A. B. Shkarin,
C. D. Brown,
N. E. Flowers-Jacobs,
L. Childress,
S. W. Hoch,
L. Hohmann,
K. Ott,
J. Reichel,
J. G. E. Harris
Abstract:
Optomechanical systems couple an electromagnetic cavity to a mechanical resonator which is typically formed from a solid object. The range of phenomena accessible to these systems depends on the properties of the mechanical resonator and on the manner in which it couples to the cavity fields. In both respects, a mechanical resonator formed from superfluid liquid helium offers several appealing fea…
▽ More
Optomechanical systems couple an electromagnetic cavity to a mechanical resonator which is typically formed from a solid object. The range of phenomena accessible to these systems depends on the properties of the mechanical resonator and on the manner in which it couples to the cavity fields. In both respects, a mechanical resonator formed from superfluid liquid helium offers several appealing features: low electromagnetic absorption, high thermal conductivity, vanishing viscosity, well-understood mechanical loss, and in situ alignment with cryogenic cavities. In addition, it offers degrees of freedom that differ qualitatively from those of a solid. Here, we describe an optomechanical system consisting of a miniature optical cavity filled with superfluid helium. The cavity mirrors define optical and mechanical modes with near-perfect overlap, resulting in an optomechanical coupling rate ~3 kHz. This coupling is used to drive the superfluid; it is also used to observe the superfluid's thermal motion, resolving a mean phonon number as low as 11.
△ Less
Submitted 17 February, 2016;
originally announced February 2016.
-
Measurement of the motional sidebands of a nanogram-scale oscillator in the quantum regime
Authors:
M. Underwood,
D. Mason,
D. Lee,
H. Xu,
L. Jiang,
A. B. Shkarin,
K. Børkje,
S. M. Girvin,
J. G. E. Harris
Abstract:
We describe measurements of the motional sidebands produced by a mechanical oscillator (with effective mass 43 ng and resonant frequency 705 kHz) that is placed in an optical cavity and cooled close to its quantum ground state. The red and blue sidebands (corresponding to Stokes and anti-Stokes scattering) from a single laser beam are recorded simultaneously via a heterodyne measurement. The oscil…
▽ More
We describe measurements of the motional sidebands produced by a mechanical oscillator (with effective mass 43 ng and resonant frequency 705 kHz) that is placed in an optical cavity and cooled close to its quantum ground state. The red and blue sidebands (corresponding to Stokes and anti-Stokes scattering) from a single laser beam are recorded simultaneously via a heterodyne measurement. The oscillator's mean phonon number n is inferred from the ratio of the sidebands, and reaches a minimum value of 0.84 +- 0.22 (corresponding to a mode temperature T = 28 +- 7 microK). We also infer n from the calibrated area of each of the two sidebands, and from the oscillator's total dam**. The values of n inferred from these four methods are in close agreement. The behavior of the sidebands as a function of the oscillator's temperature agrees well with theory that includes the quantum fluctuations of both the cavity field and the mechanical oscillator.
△ Less
Submitted 14 September, 2015; v1 submitted 27 June, 2014;
originally announced June 2014.
-
Multimode optomechanical dynamics in a cavity with avoided crossings
Authors:
D. Lee,
M. Underwood,
D. Mason,
A. B. Shkarin,
S. W. Hoch,
J. G. E. Harris
Abstract:
Cavity optomechanics offers powerful methods for controlling optical fields and mechanical motion. A number of proposals have predicted that this control can be extended considerably in devices where multiple cavity modes couple to each other via the motion of a single mechanical oscillator. Here we study the dynamical properties of such a multimode optomechanical device, in which the coupling bet…
▽ More
Cavity optomechanics offers powerful methods for controlling optical fields and mechanical motion. A number of proposals have predicted that this control can be extended considerably in devices where multiple cavity modes couple to each other via the motion of a single mechanical oscillator. Here we study the dynamical properties of such a multimode optomechanical device, in which the coupling between cavity modes results from mechanically-induced avoided crossings in the cavity's spectrum. Near the avoided crossings we find that the optical spring shows distinct features that arise from the interaction between cavity modes. Precisely at an avoided crossing, we show that the particular form of the optical spring provides a classical analog of a quantum-nondemolition measurement of the intracavity photon number. The mechanical oscillator's Brownian motion, an important source of noise in these measurements, is minimized by operating the device at cryogenic temperature (500 mK).
△ Less
Submitted 10 September, 2014; v1 submitted 13 January, 2014;
originally announced January 2014.
-
Optically Mediated Hybridization Between Two Mechanical Modes
Authors:
A. B. Shkarin,
N. E. Flowers-Jacobs,
S. W. Hoch,
A. D. Kashkanova,
C. Deutsch,
J. Reichel,
J. G. E. Harris
Abstract:
In this paper we study a system consisting of two nearly degenerate mechanical modes that couple to a single mode of an optical cavity. We show that this coupling leads to nearly complete (99.5%) hybridization of the two mechanical modes into a bright mode that experiences strong optomechanical interactions and a dark mode that experiences almost no optomechanical interactions. We use this hybridi…
▽ More
In this paper we study a system consisting of two nearly degenerate mechanical modes that couple to a single mode of an optical cavity. We show that this coupling leads to nearly complete (99.5%) hybridization of the two mechanical modes into a bright mode that experiences strong optomechanical interactions and a dark mode that experiences almost no optomechanical interactions. We use this hybridization to transfer energy between the mechanical modes with 40% efficiency.
△ Less
Submitted 4 December, 2013; v1 submitted 3 June, 2013;
originally announced June 2013.
-
Cryogenic Optomechanics with a Si3N4 Membrane and Classical Laser Noise
Authors:
A. M. Jayich,
J. C. Sankey,
K. Borkje,
D. Lee,
C. Yang,
M. Underwood,
L. Childress,
A. Petrenko,
S. M. Girvin,
J. G. E. Harris
Abstract:
We demonstrate a cryogenic optomechanical system comprising a flexible Si3N4 membrane placed at the center of a free-space optical cavity in a 400 mK cryogenic environment. We observe a mechanical quality factor Q > 4 x 10^6 for the 261-kHz fundamental drum-head mode of the membrane, and a cavity resonance halfwidth of 60 kHz. The optomechanical system therefore operates in the resolved sideband l…
▽ More
We demonstrate a cryogenic optomechanical system comprising a flexible Si3N4 membrane placed at the center of a free-space optical cavity in a 400 mK cryogenic environment. We observe a mechanical quality factor Q > 4 x 10^6 for the 261-kHz fundamental drum-head mode of the membrane, and a cavity resonance halfwidth of 60 kHz. The optomechanical system therefore operates in the resolved sideband limit. We monitor the membrane's thermal motion using a heterodyne optical circuit capable of simultaneously measuring both of the mechanical sidebands, and find that the observed optical spring and dam** quantitatively agree with theory. The mechanical sidebands exhibit a Fano lineshape, and to explain this we develop a theory describing heterodyne measurements in the presence of correlated classical laser noise. Finally, we discuss the use of a passive filter cavity to remove classical laser noise, and consider the future requirements for laser cooling this relatively large and low-frequency mechanical element to very near its quantum mechanical ground state.
△ Less
Submitted 12 September, 2012;
originally announced September 2012.
-
Fiber-Cavity-Based Optomechanical Device
Authors:
N. E. Flowers-Jacobs,
S. W. Hoch,
J. C. Sankey,
A. Kashkanova,
A. M. Jayich,
C. Deutsch,
J. Reichel,
J. G. E. Harris
Abstract:
We describe an optomechanical device consisting of a fiber-based optical cavity containing a silicon nitiride membrane. In comparison with typical free-space cavities, the fiber-cavity's small mode size (10 μm waist, 80 μm length) allows the use of smaller, lighter membranes and increases the cavity-membrane linear coupling to 3 GHz/nm and quadratic coupling to 20 GHz/nm^2. This device is also int…
▽ More
We describe an optomechanical device consisting of a fiber-based optical cavity containing a silicon nitiride membrane. In comparison with typical free-space cavities, the fiber-cavity's small mode size (10 μm waist, 80 μm length) allows the use of smaller, lighter membranes and increases the cavity-membrane linear coupling to 3 GHz/nm and quadratic coupling to 20 GHz/nm^2. This device is also intrinsically fiber-coupled and uses glass ferrules for passive alignment. These improvements will greatly simplify the use of optomechanical systems, particularly in cryogenic settings. At room temperature, we expect these devices to be able to detect the shot noise of radiation pressure.
△ Less
Submitted 8 November, 2012; v1 submitted 15 June, 2012;
originally announced June 2012.
-
Measuring mechanical motion with a single spin
Authors:
S. D. Bennett,
S. Kolkowitz,
Q. P. Unterreithmeier,
P. Rabl,
A. C. Bleszynski Jayich,
J. G. E. Harris,
M. D. Lukin
Abstract:
We study theoretically the measurement of a mechanical oscillator using a single two level system as a detector. In a recent experiment, we used a single electronic spin associated with a nitrogen vacancy center in diamond to probe the thermal motion of a magnetized cantilever at room temperature {Kolkowitz et al., Science 335, 1603 (2012)}. Here, we present a detailed analysis of the sensitivity…
▽ More
We study theoretically the measurement of a mechanical oscillator using a single two level system as a detector. In a recent experiment, we used a single electronic spin associated with a nitrogen vacancy center in diamond to probe the thermal motion of a magnetized cantilever at room temperature {Kolkowitz et al., Science 335, 1603 (2012)}. Here, we present a detailed analysis of the sensitivity limits of this technique, as well as the possibility to measure the zero point motion of the oscillator. Further, we discuss the issue of measurement backaction in sequential measurements and find that although backaction heating can occur, it does not prohibit the detection of zero point motion. Throughout the paper we focus on the experimental implementation of a nitrogen vacancy center coupled to a magnetic cantilever; however, our results are applicable to a wide class of spin-oscillator systems. Implications for preparation of nonclassical states of a mechanical oscillator are also discussed.
△ Less
Submitted 30 May, 2012;
originally announced May 2012.
-
High-reflectivity, high-Q micromechanical membranes via guided resonances for enhanced optomechanical coupling
Authors:
Catvu H. Bui,
Jiangjun Zheng,
S. W. Hoch,
Lennon Y. T. Lee,
J. G. E. Harris,
Chee Wei Wong
Abstract:
Using Fano-type guided resonances (GRs) in photonic crystal (PhC) slab structures, we numerically and experimentally demonstrate optical reflectivity enhancement of high-Q SiNx membrane-type resonators used in membrane-in-the-middle optomechanical (OM) systems. Normal-incidence transmission and mechanical ringdown measurements of 50-nm-thick PhC membranes demonstrate GRs near 1064 nm, leading to a…
▽ More
Using Fano-type guided resonances (GRs) in photonic crystal (PhC) slab structures, we numerically and experimentally demonstrate optical reflectivity enhancement of high-Q SiNx membrane-type resonators used in membrane-in-the-middle optomechanical (OM) systems. Normal-incidence transmission and mechanical ringdown measurements of 50-nm-thick PhC membranes demonstrate GRs near 1064 nm, leading to a ~ 4\times increase in reflectivity while preserving high mechanical Q factors of up to ~ 5 \times 10^6. The results would allow improvement of membrane-in-the-middle OM systems by virtue of increased OM coupling, presenting a path towards ground state cooling of such a membrane and observations of related quantum effects.
△ Less
Submitted 17 October, 2011;
originally announced October 2011.
-
Observability of radiation pressure shot noise in optomechanical systems
Authors:
K. Borkje,
A. Nunnenkamp,
B. M. Zwickl,
C. Yang,
J. G. E. Harris,
S. M. Girvin
Abstract:
We present a theoretical study of an experiment designed to detect radiation pressure shot noise in an optomechanical system. Our model consists of a coherently driven optical cavity mode that is coupled to a mechanical oscillator. We examine the cross-correlation between two quadratures of the output field from the cavity. We determine under which circumstances radiation pressure shot noise can b…
▽ More
We present a theoretical study of an experiment designed to detect radiation pressure shot noise in an optomechanical system. Our model consists of a coherently driven optical cavity mode that is coupled to a mechanical oscillator. We examine the cross-correlation between two quadratures of the output field from the cavity. We determine under which circumstances radiation pressure shot noise can be detected by a measurement of this cross-correlation. This is done in the general case of nonzero detuning between the frequency of the drive and the cavity resonance frequency. We study the qualitative features of the different contributions to the cross-correlator and provide quantitative figures of merit for the relative importance of the radiation pressure shot noise contribution to other contributions. We also propose a modified setup of this experiment relevant to the "membrane-in-the-middle" geometry, which potentially can avoid the problems of static bistability and classical noise in the drive.
△ Less
Submitted 20 April, 2010;
originally announced April 2010.
-
Cooling and squeezing via quadratic optomechanical coupling
Authors:
A. Nunnenkamp,
K. Borkje,
J. G. E. Harris,
S. M. Girvin
Abstract:
We explore the physics of optomechanical systems in which an optical cavity mode is coupled parametrically to the square of the position of a mechanical oscillator. We derive an effective master equation describing two-phonon cooling of the mechanical oscillator. We show that for high temperatures and weak coupling, the steady-state phonon number distribution is non-thermal (Gaussian) and that eve…
▽ More
We explore the physics of optomechanical systems in which an optical cavity mode is coupled parametrically to the square of the position of a mechanical oscillator. We derive an effective master equation describing two-phonon cooling of the mechanical oscillator. We show that for high temperatures and weak coupling, the steady-state phonon number distribution is non-thermal (Gaussian) and that even for strong cooling the mean phonon number remains finite. Moreover, we demonstrate how to achieve mechanical squeezing by driving the cavity with two beams. Finally, we calculate the optical output and squeezing spectra. Implications for optomechanics experiments with the membrane-in-the-middle geometry or ultracold atoms in optical resonators are discussed.
△ Less
Submitted 31 August, 2010; v1 submitted 14 April, 2010;
originally announced April 2010.
-
Strong and Tunable Nonlinear Optomechanical Coupling in a Low-Loss System
Authors:
Jack C. Sankey,
Cheng Yang,
Benjamin M. Zwickl,
Andrew M. Jayich,
Jack G. E. Harris
Abstract:
A major goal in optomechanics is to observe and control quantum behavior in a system consisting of a mechanical resonator coupled to an optical cavity. Work towards this goal has focused on increasing the strength of the coupling between the mechanical and optical degrees of freedom; however, the form of this coupling is crucial in determining which phenomena can be observed in such a system. He…
▽ More
A major goal in optomechanics is to observe and control quantum behavior in a system consisting of a mechanical resonator coupled to an optical cavity. Work towards this goal has focused on increasing the strength of the coupling between the mechanical and optical degrees of freedom; however, the form of this coupling is crucial in determining which phenomena can be observed in such a system. Here we demonstrate that avoided crossings in the spectrum of an optical cavity containing a flexible dielectric membrane allow us to realize several different forms of the optomechanical coupling. These include cavity detunings that are (to lowest order) linear, quadratic, or quartic in the membrane's displacement, and a cavity finesse that is linear in (or independent of) the membrane's displacement. All these couplings are realized in a single device with extremely low optical loss and can be tuned over a wide range in situ; in particular, we find that the quadratic coupling can be increased three orders of magnitude beyond previous devices. As a result of these advances, the device presented here should be capable of demonstrating the quantization of the membrane's mechanical energy.
△ Less
Submitted 22 February, 2010;
originally announced February 2010.
-
A quantum spin transducer based on nano electro-mechancial resonator arrays
Authors:
P. Rabl,
S. J. Kolkowitz,
F. H. Koppens,
J. G. E. Harris,
P. Zoller,
M. D. Lukin
Abstract:
Implementation of quantum information processing faces the contradicting requirements of combining excellent isolation to avoid decoherence with the ability to control coherent interactions in a many-body quantum system. For example, spin degrees of freedom of electrons and nuclei provide a good quantum memory due to their weak magnetic interactions with the environment. However, for the same re…
▽ More
Implementation of quantum information processing faces the contradicting requirements of combining excellent isolation to avoid decoherence with the ability to control coherent interactions in a many-body quantum system. For example, spin degrees of freedom of electrons and nuclei provide a good quantum memory due to their weak magnetic interactions with the environment. However, for the same reason it is difficult to achieve controlled entanglement of spins over distances larger than tens of nanometers. Here we propose a universal realization of a quantum data bus for electronic spin qubits where spins are coupled to the motion of magnetized mechanical resonators via magnetic field gradients. Provided that the mechanical system is charged, the magnetic moments associated with spin qubits can be effectively amplified to enable a coherent spin-spin coupling over long distances via Coulomb forces. Our approach is applicable to a wide class of electronic spin qubits which can be localized near the magnetized tips and can be used for the implementation of hybrid quantum computing architectures.
△ Less
Submitted 3 August, 2009;
originally announced August 2009.
-
Improved "Position Squared" Readout of a Mechanical Resonator in an Optical Cavity Using Degenerate Optical Modes
Authors:
Jack C. Sankey,
Andrew M. Jayich,
Benjamin M. Zwickl,
Cheng Yang,
Jack G. E. Harris
Abstract:
Optomechanical devices in which a flexible SiN membrane is placed inside an optical cavity allow for very high finesse and mechanical quality factor in a single device. They also provide fundamentally new functionality: the cavity detuning can be a quadratic function of membrane position. This enables a measurement of "position squared" ($x^2$) and in principle a QND phonon number readout of the…
▽ More
Optomechanical devices in which a flexible SiN membrane is placed inside an optical cavity allow for very high finesse and mechanical quality factor in a single device. They also provide fundamentally new functionality: the cavity detuning can be a quadratic function of membrane position. This enables a measurement of "position squared" ($x^2$) and in principle a QND phonon number readout of the membrane. However, the readout achieved using a single transverse cavity mode is not sensitive enough to observe quantum jumps between phonon Fock states.
Here we demonstrate an $x^2$-sensitivity that is orders of magnitude stronger using two transverse cavity modes that are nearly degenerate. We derive a first-order perturbation theory to describe the interactions between nearly-degenerate cavity modes and achieve good agreement with our measurements using realistic parameters. We also demonstrate theoretically that the $x^2$-coupling should be easily tunable over a wide range.
△ Less
Submitted 9 November, 2008;
originally announced November 2008.
-
Dispersive optomechanics: a membrane inside a cavity
Authors:
A. M. Jayich,
J. C. Sankey,
B. M. Zwickl,
C. Yang,
J. D. Thompson,
S. M. Girvin,
A. A. Clerk,
F. Marquardt,
J. G. E. Harris
Abstract:
We present the results of theoretical and experimental studies of dispersively coupled (or "membrane in the middle") optomechanical systems. We calculate the linear optical properties of a high finesse cavity containing a thin dielectric membrane. We focus on the cavity's transmission, reflection, and finesse as a function of the membrane's position along the cavity axis and as a function of its…
▽ More
We present the results of theoretical and experimental studies of dispersively coupled (or "membrane in the middle") optomechanical systems. We calculate the linear optical properties of a high finesse cavity containing a thin dielectric membrane. We focus on the cavity's transmission, reflection, and finesse as a function of the membrane's position along the cavity axis and as a function of its optical loss. We compare these calculations with measurements and find excellent agreement in cavities with empty-cavity finesses in the range 10^4 to 10^5. The imaginary part of the membrane's index of refraction is found to be approximately 10^(-4). We calculate the laser cooling performance of this system, with a particular focus on the less-intuitive regime in which photons "tunnel" through the membrane on a time scale comparable to the membrane's period of oscillation. Lastly, we present calculations of quantum non-demolition measurements of the membrane's phonon number in the low signal-to-noise regime where the phonon lifetime is comparable to the QND readout time.
△ Less
Submitted 23 May, 2008;
originally announced May 2008.
-
High quality mechanical and optical properties of commercial silicon nitride membranes
Authors:
B. M. Zwickl,
W. E. Shanks,
A. M. Jayich,
C. Yang,
A. C. Bleszynski Jayich,
J. D. Thompson,
J. G. E. Harris
Abstract:
We have measured the optical and mechanical loss of commercial silicon nitride membranes. We find that 50 nm-thick, 1 mm^2 membranes have mechanical Q > 10^6 at 293 K, and Q > 10^7 at 300 mK, well above what has been observed in devices with comparable dimensions. The near-IR optical loss at 293 K is less than 2E-4. This combination of properties make these membranes attractive candidates for st…
▽ More
We have measured the optical and mechanical loss of commercial silicon nitride membranes. We find that 50 nm-thick, 1 mm^2 membranes have mechanical Q > 10^6 at 293 K, and Q > 10^7 at 300 mK, well above what has been observed in devices with comparable dimensions. The near-IR optical loss at 293 K is less than 2E-4. This combination of properties make these membranes attractive candidates for studying quantum effects in optomechanical systems.
△ Less
Submitted 14 November, 2007;
originally announced November 2007.
-
Strong dispersive coupling of a high finesse cavity to a micromechanical membrane
Authors:
J. D. Thompson,
B. M. Zwickl,
A. M. Jayich,
Florian Marquardt,
S. M. Girvin,
J. G. E. Harris
Abstract:
Macroscopic mechanical objects and electromagnetic degrees of freedom couple to each other via radiation pressure. Optomechanical systems with sufficiently strong coupling are predicted to exhibit quantum effects and are a topic of considerable interest. Devices reaching this regime would offer new types of control of the quantum state of both light and matter and would provide a new arena in wh…
▽ More
Macroscopic mechanical objects and electromagnetic degrees of freedom couple to each other via radiation pressure. Optomechanical systems with sufficiently strong coupling are predicted to exhibit quantum effects and are a topic of considerable interest. Devices reaching this regime would offer new types of control of the quantum state of both light and matter and would provide a new arena in which to explore the boundary between quantum and classical physics. Experiments to date have achieved sufficient optomechanical coupling to laser-cool mechanical devices but have not yet reached the quantum regime. The outstanding technical challenge in this field is integrating sensitive micromechanical elements (which must be small, light, and flexible) into high finesse cavities (which are typically much more rigid and massive) without compromising the mechanical or optical properties of either. A second, and more fundamental, challenge is to read out the mechanical element's quantum state: displacement measurements (no matter how sensitive) cannot determine the energy eigenstate of an oscillator, and measurements which couple to quantities other than displacement have been difficult to realize. Here we present a novel optomechanical system which seems to resolve both these challenges. We demonstrate a cavity which is detuned by the motion of a thin dielectric membrane placed between two macroscopic, rigid, high-finesse mirrors. This approach segregates optical and mechanical functionality to physically distinct structures and avoids compromising either. It also allows for direct measurement of the square of the membrane's displacement, and thus in principle the membrane's energy eigenstate. We estimate it should be practical to use this scheme to observe quantum jumps of a mechanical system.
△ Less
Submitted 13 July, 2007; v1 submitted 11 July, 2007;
originally announced July 2007.