-
A Near Quantum Limited Sub-GHz TiN Kinetic Inductance Traveling Wave Parametric Amplifier Operating in a Frequency Translating Mode
Authors:
Farzad Faramarzi,
Sasha Sypkens,
Ryan Stephenson,
Byeong H. Eom,
Henry Leduc,
Saptarshi Chaudhuri,
Peter Day
Abstract:
We present the design and experimental characterization of a kinetic-inductance traveling-wave parametric amplifier (KI-TWPA) for sub-GHz frequencies. KI-TWPAs amplify signals through nonlinear mixing processes supported by the nonlinear kinetic inductance of a superconducting transmission line. The device described here utilizes a compactly meandered TiN microstrip transmission line to achieve th…
▽ More
We present the design and experimental characterization of a kinetic-inductance traveling-wave parametric amplifier (KI-TWPA) for sub-GHz frequencies. KI-TWPAs amplify signals through nonlinear mixing processes supported by the nonlinear kinetic inductance of a superconducting transmission line. The device described here utilizes a compactly meandered TiN microstrip transmission line to achieve the length needed to amplify sub-GHz signals. It is operated in a frequency translating mode where the amplified signal tone is terminated at the output of the amplifier, and the idler tone at approximately 2.5~GHz is brought out of the cryostat. By varying the pump frequency, a gain of up to 22 dB was achieved in a tunable range from about 450 to 850~MHz. Use of TiN as the nonlinear element allows for a reduction of the required pump power by roughly an order of magnitude relative to NbTiN, which has been used for previous KI-TWPA implementations. This amplifier has the potential to enable high-sensitivity and high-speed measurements in a wide range of applications, such as quantum computing, astrophysics, and dark matter detection.
△ Less
Submitted 1 June, 2024;
originally announced June 2024.
-
A 4-8 GHz Kinetic Inductance Travelling-Wave Parametric Amplifier Using Four-Wave Mixing with Near Quantum-Limit Noise Performance
Authors:
Farzad Faramarzi,
Ryan Stephenson,
Sasha Sypkens,
Byeong H. Eom,
Henry LeDuc,
Peter Day
Abstract:
Kinetic inductance traveling-wave parametric amplifiers (KI-TWPA) have a wide instantaneous bandwidth with near quantum-limited performance and a relatively high dynamic range. Because of this, they are suitable readout devices for cryogenic detectors and superconducting qubits and have a variety of applications in quantum sensing. This work discusses the design, fabrication, and performance of a…
▽ More
Kinetic inductance traveling-wave parametric amplifiers (KI-TWPA) have a wide instantaneous bandwidth with near quantum-limited performance and a relatively high dynamic range. Because of this, they are suitable readout devices for cryogenic detectors and superconducting qubits and have a variety of applications in quantum sensing. This work discusses the design, fabrication, and performance of a KI-TWPA based on four-wave mixing in a NbTiN microstrip transmission line. This device amplifies a signal band from 4 to 8~GHz without contamination from image tones, which are produced in a separate higher frequency band. The 4 - 8~GHz band is commonly used to read out cryogenic detectors, such as microwave kinetic inductance detectors (MKIDs) and Josephson junction-based qubits. We report a measured maximum gain of over 20 dB using four-wave mixing with a 1-dB gain compression point of -58 dBm at 15 dB of gain over that band. The bandwidth and peak gain are tunable by adjusting the pump-tone frequency and power. Using a Y-factor method, we measure an amplifier-added noise of $ 0.5 \leq N_{added} \leq 1.5$ photons from 4.5 - 8 GHz.
△ Less
Submitted 3 June, 2024; v1 submitted 18 February, 2024;
originally announced February 2024.
-
Demonstration of a Quantum Noise Limited Traveling-Wave Parametric Amplifier
Authors:
Nikita Klimovich,
Peter Day,
Shibo Shu,
Byeong Ho Eom,
Henry Leduc,
Andrew Beyer
Abstract:
Recent progress in quantum computing and the development of novel detector technologies for astrophysics is driving the need for high-gain, broadband, and quantum-limited amplifiers. We present a purely traveling-wave parametric amplifier (TWPA) using an inverted NbTiN microstrip and amorphous Silicon dielectric. Through dispersion engineering, we are able to obtain $50~Ω$ impedance matching and s…
▽ More
Recent progress in quantum computing and the development of novel detector technologies for astrophysics is driving the need for high-gain, broadband, and quantum-limited amplifiers. We present a purely traveling-wave parametric amplifier (TWPA) using an inverted NbTiN microstrip and amorphous Silicon dielectric. Through dispersion engineering, we are able to obtain $50~Ω$ impedance matching and suppress undesired parametric processes while phase matching the three-wave-mixing amplification across a large range of frequencies. The result is a broadband amplifier operating with 20 dB gain and quantum-limited noise performance at 20 mK. At the single frequency where the amplifier is phase sensitive, we further demonstrate 8 dB of vacuum noise squeezing.
△ Less
Submitted 23 June, 2023; v1 submitted 19 June, 2023;
originally announced June 2023.
-
Strong kinetic-inductance Kerr nonlinearity with titanium nitride nanowires
Authors:
Chaitali Joshi,
Wenyuan Chen,
Henry G. LeDuc,
Peter K. Day,
Mohammad Mirhosseini
Abstract:
Thin films of disordered superconductors such as titanium nitride (TiN) exhibit large kinetic inductance (KI), high critical temperature, and large quality factors at the single-photon level. KI nonlinearity can be exploited as an alternative to Josephson junctions for creating novel nonlinear quantum devices with the potential to operate at higher frequencies and at elevated temperatures. We stud…
▽ More
Thin films of disordered superconductors such as titanium nitride (TiN) exhibit large kinetic inductance (KI), high critical temperature, and large quality factors at the single-photon level. KI nonlinearity can be exploited as an alternative to Josephson junctions for creating novel nonlinear quantum devices with the potential to operate at higher frequencies and at elevated temperatures. We study a means of magnifying KI nonlinearity by confining the current density of resonant electromagnetic modes in nanowires with a small volume $V \simeq 10^{-4}\text{um}^3$. Using this concept, we realize microwave-frequency Kerr cavities with a maximum Kerr-shift per photon of $K/2π= 123.5 \pm 3$ kHz and report a nonlinearity-to-linewidth ratio $K/γ= 21\%$. With improved design, our devices are expected to approach the regime of strong quantum nonlinearity in the millimeter-wave spectrum.
△ Less
Submitted 30 July, 2022;
originally announced August 2022.
-
A quantum electromechanical interface for long-lived phonons
Authors:
Alkim Bozkurt,
Han Zhao,
Chaitali Joshi,
Henry G. LeDuc,
Peter K. Day,
Mohammad Mirhosseini
Abstract:
Controlling long-lived mechanical oscillators in the quantum regime holds promises for quantum information processing. Here, we present an electromechanical system capable of operating in the GHz-frequency band in a silicon-on-insulator platform. Relying on a novel driving scheme based on an electrostatic field and high-impedance microwave cavities based on TiN superinductors, we are able to demon…
▽ More
Controlling long-lived mechanical oscillators in the quantum regime holds promises for quantum information processing. Here, we present an electromechanical system capable of operating in the GHz-frequency band in a silicon-on-insulator platform. Relying on a novel driving scheme based on an electrostatic field and high-impedance microwave cavities based on TiN superinductors, we are able to demonstrate a parametrically-enhanced electromechanical coupling of ${g/2 π} = 1.1$ MHz, sufficient to enter the strong-coupling regime with a cooperativity of $\mathcal{C} = 1200$. The absence of piezoelectric materials in our platform leads to long mechanical lifetimes, finding intrinsic values up to $τ_\text{d} = 265~ μ$s ($Q = 8.4 \times {10}^6$ at $ω_\mathrm{m}/2π= 5$ GHz) measured at low-phonon numbers and millikelvin temperatures. Despite the strong parametric drives, we find the cavity-mechanics system in the quantum ground state by performing sideband thermometry measurements. Simultaneously achieving ground-state operation, long mechanical lifetimes, and strong coupling sets the stage for employing silicon electromechanical resonators as memory elements and transducers in hybrid quantum systems, and as a tool for probing the origins of acoustic loss in the quantum regime.
△ Less
Submitted 22 July, 2022;
originally announced July 2022.
-
Initial Design of a W-band Superconducting Kinetic Inductance Qubit (Kineticon)
Authors:
Farzad B. Faramarzi,
Peter K. Day,
Jacob Glasby,
Sasha Sypkens,
Marco Colangelo,
Ralph Chamberlin,
Mohammad Mirhosseini,
Kevin Schmidt,
Karl K. Berggren Philip Mauskopf
Abstract:
Superconducting qubits are widely used in quantum computing research and industry. We describe a superconducting kinetic inductance qubit (and introduce the term Kineticon to describe it) operating at W-band frequencies with a nonlinear nanowire section that provides the anharmonicity required for two distinct quantum energy states. Operating the qubits at higher frequencies may relax the dilution…
▽ More
Superconducting qubits are widely used in quantum computing research and industry. We describe a superconducting kinetic inductance qubit (and introduce the term Kineticon to describe it) operating at W-band frequencies with a nonlinear nanowire section that provides the anharmonicity required for two distinct quantum energy states. Operating the qubits at higher frequencies may relax the dilution refrigerator temperature requirements for these devices and paves the path for multiplexing a large number of qubits. Millimeter-wave operation requires superconductors with relatively high $T_c$, which implies high gap frequency, 2$Δ/h$, beyond which photons break Cooper pairs. For example, NbTiN with $T_c =15\,\text{K}$ has a gap frequency near 1.4 THz, which is much higher than that of aluminum (90 GHz), allowing for operation throughout the millimeter-wave band. Here we describe a design and simulation of a W-band Kineticon qubit embedded in a 3-D cavity. We perform classical electromagnetic calculations of the resulting field distributions.
△ Less
Submitted 14 March, 2021; v1 submitted 15 December, 2020;
originally announced December 2020.
-
A frequency and sensitivity tunable microresonator array for high-speed quantum processor readout
Authors:
J. D. Whittaker,
L. J. Swenson,
M. H. Volkmann,
P. Spear,
F. Altomare,
A. J. Berkley,
B. Bumble,
P. Bunyk,
P. K. Day,
B. H. Eom,
R. Harris,
J. P. Hilton,
E. Hoskinson,
M. W. Johnson,
A. Kleinsasser,
E. Ladizinsky,
T. Lanting,
T. Oh,
I. Perminov,
E. Tolkacheva,
J. Yao
Abstract:
Superconducting microresonators have been successfully utilized as detection elements for a wide variety of applications. With multiplexing factors exceeding 1,000 detectors per transmission line, they are the most scalable low-temperature detector technology demonstrated to date. For high-throughput applications, fewer detectors can be coupled to a single wire but utilize a larger per-detector ba…
▽ More
Superconducting microresonators have been successfully utilized as detection elements for a wide variety of applications. With multiplexing factors exceeding 1,000 detectors per transmission line, they are the most scalable low-temperature detector technology demonstrated to date. For high-throughput applications, fewer detectors can be coupled to a single wire but utilize a larger per-detector bandwidth. For all existing designs, fluctuations in fabrication tolerances result in a non-uniform shift in resonance frequency and sensitivity, which ultimately limits the efficiency of band-width utilization. Here we present the design, implementation, and initial characterization of a superconducting microresonator readout integrating two tunable inductances per detector. We demonstrate that these tuning elements provide independent control of both the detector frequency and sensitivity, allowing us to maximize the transmission line bandwidth utilization. Finally we discuss the integration of these detectors in a multilayer fabrication stack for high-speed readout of the D-Wave quantum processor, highlighting the use of control and routing circuitry composed of single flux-quantum loops to minimize the number of control wires at the lowest temperature stage.
△ Less
Submitted 22 April, 2016; v1 submitted 18 September, 2015;
originally announced September 2015.
-
A Wideband, Low-Noise Superconducting Amplifier with High Dynamic Range
Authors:
Byeong Ho Eom,
Peter K. Day,
Henry G. Leduc,
Jonas Zmuidzinas
Abstract:
Amplifiers are ubiquitous in electronics and play a fundamental role in a wide range of scientific measurements. From a user's perspective, an ideal amplifier has very low noise, operates over a broad frequency range, and has a high dynamic range - it is capable of handling strong signals with little distortion. Unfortunately, it is difficult to obtain all of these characteristics simultaneously.…
▽ More
Amplifiers are ubiquitous in electronics and play a fundamental role in a wide range of scientific measurements. From a user's perspective, an ideal amplifier has very low noise, operates over a broad frequency range, and has a high dynamic range - it is capable of handling strong signals with little distortion. Unfortunately, it is difficult to obtain all of these characteristics simultaneously. For example, modern transistor amplifiers offer multi-octave bandwidths and excellent dynamic range. However, their noise remains far above the fundamental limit set by the uncertainty principle of quantum mechanics. Parametric amplifiers, which predate transistor amplifiers and are widely used in optics, exploit a nonlinear response to transfer power from a strong pump tone to a weak signal. If the nonlinearity is purely reactive, ie. nondissipative, in theory the amplifier noise can reach the quantum-mechanical limit. Indeed, microwave frequency superconducting Josephson parametric amplifiers do approach the quantum limit, but generally are narrow band and have very limited dynamic range. In this paper, we describe a superconducting parametric amplifier that overcomes these limitations. The amplifier is very simple, consisting only of a patterned metal film on a dielectric substrate, and relies on the nonlinear kinetic inductance of a superconducting transmission line. We measure gain extending over 2 GHz on either side of an 11.56 GHz pump tone, and we place an upper limit on the added noise of the amplifier of 3.4 photons at 9.4 GHz. Furthermore, the dynamic range is very large, comparable to microwave transistor amplifiers, and the concept can be applied throughout the microwave, millimeter-wave and submillimeter-wave bands.
△ Less
Submitted 11 January, 2012;
originally announced January 2012.