-
Erasure detection of a dual-rail qubit encoded in a double-post superconducting cavity
Authors:
Akshay Koottandavida,
Ioannis Tsioutsios,
Aikaterini Kargioti,
Cassady R. Smith,
Vidul R. Joshi,
Wei Dai,
James D. Teoh,
Jacob C. Curtis,
Luigi Frunzio,
Robert J. Schoelkopf,
Michel H. Devoret
Abstract:
Qubits with predominantly erasure errors present distinctive advantages for quantum error correction(QEC) and fault tolerant quantum computing. Logical qubits based on dual-rail encoding that exploit erasure detection have been recently proposed in superconducting circuit architectures, either with coupled transmons or cavities. Here, we implement a dual-rail qubit encoded in a compact, double-pos…
▽ More
Qubits with predominantly erasure errors present distinctive advantages for quantum error correction(QEC) and fault tolerant quantum computing. Logical qubits based on dual-rail encoding that exploit erasure detection have been recently proposed in superconducting circuit architectures, either with coupled transmons or cavities. Here, we implement a dual-rail qubit encoded in a compact, double-post superconducting cavity. Using an auxiliary transmon, we perform erasure detection on the dual-rail subspace. We characterize the behaviour of the codespace by a novel method to perform joint-Wigner tomography. This is based on modifying the cross-Kerr interaction between the cavity modes and the transmon. We measure an erasure rate of 3.981 +/- 0.003 (ms)-1 and a residual dephasing error rate up to 0.17 (ms)-1 within the codespace. This strong hierarchy of error rates, together with the compact and hardware-efficient nature of this novel architecture, hold promise in realising QEC schemes with enhanced thresholds and improved scaling.
△ Less
Submitted 17 November, 2023; v1 submitted 7 November, 2023;
originally announced November 2023.
-
A high on-off ratio beamsplitter interaction for gates on bosonically encoded qubits
Authors:
Benjamin J. Chapman,
Stijn J. de Graaf,
Sophia H. Xue,
Yaxing Zhang,
James Teoh,
Jacob C. Curtis,
Takahiro Tsunoda,
Alec Eickbusch,
Alexander P. Read,
Akshay Koottandavida,
Shantanu O. Mundhada,
Luigi Frunzio,
M. H. Devoret,
S. M. Girvin,
R. J. Schoelkopf
Abstract:
Encoding a qubit in a high quality superconducting microwave cavity offers the opportunity to perform the first layer of error correction in a single device, but presents a challenge: how can quantum oscillators be controlled while introducing a minimal number of additional error channels? We focus on the two-qubit portion of this control problem by using a 3-wave mixing coupling element to engine…
▽ More
Encoding a qubit in a high quality superconducting microwave cavity offers the opportunity to perform the first layer of error correction in a single device, but presents a challenge: how can quantum oscillators be controlled while introducing a minimal number of additional error channels? We focus on the two-qubit portion of this control problem by using a 3-wave mixing coupling element to engineer a programmable beamsplitter interaction between two bosonic modes separated by more than an octave in frequency, without introducing major additional sources of decoherence. Combining this with single-oscillator control provided by a dispersively coupled transmon provides a framework for quantum control of multiple encoded qubits. The beamsplitter interaction $g_\text{bs}$ is fast relative to the timescale of oscillator decoherence, enabling over $10^3$ beamsplitter operations per coherence time, and approaching the typical rate of the dispersive coupling $χ$ used for individual oscillator control. Further, the programmable coupling is engineered without adding unwanted interactions between the oscillators, as evidenced by the high on-off ratio of the operations, which can exceed $10^5$. We then introduce a new protocol to realize a hybrid controlled-SWAP operation in the regime $g_{bs}\approxχ$, in which a transmon provides the control bit for the SWAP of two bosonic modes. Finally, we use this gate in a SWAP test to project a pair of bosonic qubits into a Bell state with measurement-corrected fidelity of $95.5\% \pm 0.2\%$.
△ Less
Submitted 2 July, 2023; v1 submitted 22 December, 2022;
originally announced December 2022.
-
Error-detectable bosonic entangling gates with a noisy ancilla
Authors:
Takahiro Tsunoda,
James D. Teoh,
William D. Kalfus,
Stijn J. de Graaf,
Benjamin J. Chapman,
Jacob C. Curtis,
Neel Thakur,
Steven M. Girvin,
Robert J. Schoelkopf
Abstract:
Bosonic quantum error correction has proven to be a successful approach for extending the coherence of quantum memories, but to execute deep quantum circuits, high-fidelity gates between encoded qubits are needed. To that end, we present a family of error-detectable two-qubit gates for a variety of bosonic encodings. From a new geometric framework based on a "Bloch sphere" of bosonic operators, we…
▽ More
Bosonic quantum error correction has proven to be a successful approach for extending the coherence of quantum memories, but to execute deep quantum circuits, high-fidelity gates between encoded qubits are needed. To that end, we present a family of error-detectable two-qubit gates for a variety of bosonic encodings. From a new geometric framework based on a "Bloch sphere" of bosonic operators, we construct $ZZ_L(θ)$ and $\text{eSWAP}(θ)$ gates for the binomial, 4-legged cat, dual-rail and several other bosonic codes. The gate Hamiltonian is simple to engineer, requiring only a programmable beamsplitter between two bosonic qubits and an ancilla dispersively coupled to one qubit. This Hamiltonian can be realized in circuit QED hardware with ancilla transmons and microwave cavities. The proposed theoretical framework was developed for circuit QED but is generalizable to any platform that can effectively generate this Hamiltonian. Crucially, one can also detect first-order errors in the ancilla and the bosonic qubits during the gates. We show that this allows one to reach error-detected gate fidelities at the $10^{-4}$ level with today's hardware, limited only by second-order hardware errors.
△ Less
Submitted 21 December, 2022;
originally announced December 2022.
-
Precision measurement of the microwave dielectric loss of sapphire in the quantum regime with parts-per-billion sensitivity
Authors:
Alexander P. Read,
Benjamin J. Chapman,
Chan U Lei,
Jacob C. Curtis,
Suhas Ganjam,
Lev Krayzman,
Luigi Frunzio,
Robert J. Schoelkopf
Abstract:
Dielectric loss is known to limit state-of-the-art superconducting qubit lifetimes. Recent experiments imply upper bounds on bulk dielectric loss tangents on the order of $100$ parts-per-billion, but because these inferences are drawn from fully fabricated devices with many loss channels, they do not definitively implicate or exonerate the dielectric. To resolve this ambiguity, we have devised a m…
▽ More
Dielectric loss is known to limit state-of-the-art superconducting qubit lifetimes. Recent experiments imply upper bounds on bulk dielectric loss tangents on the order of $100$ parts-per-billion, but because these inferences are drawn from fully fabricated devices with many loss channels, they do not definitively implicate or exonerate the dielectric. To resolve this ambiguity, we have devised a measurement method capable of separating and resolving bulk dielectric loss with a sensitivity at the level of $5$ parts per billion. The method, which we call the dielectric dipper, involves the in-situ insertion of a dielectric sample into a high-quality microwave cavity mode. Smoothly varying the sample's participation in the cavity mode enables a differential measurement of the sample's dielectric loss tangent. The dielectric dipper can probe the low-power behavior of dielectrics at cryogenic temperatures, and does so without the need for any lithographic process, enabling controlled comparisons of substrate materials and processing techniques. We demonstrate the method with measurements of EFG sapphire, from which we infer a bulk loss tangent of $62(7) \times 10^{-9}$ and a substrate-air interface loss tangent of $12(2) \times 10^{-4}$. For a typical transmon, this bulk loss tangent would limit device quality factors to less than $20$ million, suggesting that bulk loss is likely the dominant loss mechanism in the longest-lived transmons on sapphire. We also demonstrate this method on HEMEX sapphire and bound its bulk loss tangent to be less than $15(5) \times 10^{-9}$. As this bound is about 3 times smaller than the bulk loss tangent of EFG sapphire, use of HEMEX sapphire as a substrate would lift the bulk dielectric coherence limit of a typical transmon qubit to several milliseconds.
△ Less
Submitted 30 April, 2023; v1 submitted 28 June, 2022;
originally announced June 2022.
-
Drive-induced nonlinearities of cavity modes coupled to a transmon ancilla
Authors:
Yaxing Zhang,
Jacob C. Curtis,
Christopher S. Wang,
R. J. Schoelkopf,
S. M. Girvin
Abstract:
High-Q microwave cavity modes coupled to transmon ancillas provide a hardware-efficient platform for quantum computing. Due to their coupling, the cavity modes inherit finite nonlinearity from the transmons. In this work, we theoretically and experimentally investigate how an off-resonant drive on the transmon ancilla modifies the nonlinearities of cavity modes in qualitatively different ways, dep…
▽ More
High-Q microwave cavity modes coupled to transmon ancillas provide a hardware-efficient platform for quantum computing. Due to their coupling, the cavity modes inherit finite nonlinearity from the transmons. In this work, we theoretically and experimentally investigate how an off-resonant drive on the transmon ancilla modifies the nonlinearities of cavity modes in qualitatively different ways, depending on the interrelation among cavity-transmon detuning, drive-transmon detuning and transmon anharmonicity. For a cavity-transmon detuning that is smaller than or comparable to the drive-transmon detuning and transmon anharmonicity, the off-resonant transmon drive can induce multiphoton resonances among cavity and transmon excitations that strongly modify cavity nonlinearities as drive parameters vary. For a large cavity-transmon detuning, the drive induces cavity-photon-number-dependent ac Stark shifts of transmon levels that translate into effective cavity nonlinearities. In the regime of weak transmon-cavity coupling, the cavity Kerr nonlinearity relates to the third-order nonlinear susceptibility function $χ^{(3)}$ of the driven ancilla. This susceptibility function provides a numerically efficient way of computing the cavity Kerr particularly for systems with many cavity modes controlled by a single transmon. It also serves as a diagnostic tool for identifying undesired drive-induced multiphoton resonance processes. Lastly, we show that by judiciously choosing the drive amplitude, a single off-resonant transmon drive can be used to cancel the cavity self-Kerr nonlinearity or the inter-cavity cross-Kerr. This provides a way of dynamically correcting the cavity Kerr nonlinearity during bosonic operations or quantum error correction protocols that rely on the cavity modes being linear.
△ Less
Submitted 7 March, 2022; v1 submitted 16 June, 2021;
originally announced June 2021.
-
Single-shot number-resolved detection of microwave photons with error mitigation
Authors:
Jacob C. Curtis,
Connor T. Hann,
Salvatore S. Elder,
Christopher S. Wang,
Luigi Frunzio,
Liang Jiang,
Robert J. Schoelkopf
Abstract:
Single-photon detectors are ubiquitous and integral components of photonic quantum cryptography, communication, and computation. Many applications, however, require not only detecting the presence of any photons, but distinguishing the number present with a single shot. Here, we implement a single-shot, high-fidelity photon number-resolving detector of up to 15 microwave photons in a cavity-qubit…
▽ More
Single-photon detectors are ubiquitous and integral components of photonic quantum cryptography, communication, and computation. Many applications, however, require not only detecting the presence of any photons, but distinguishing the number present with a single shot. Here, we implement a single-shot, high-fidelity photon number-resolving detector of up to 15 microwave photons in a cavity-qubit circuit QED platform. This detector functions by measuring a series of generalized parity operators which make up the bits in the binary decomposition of the photon number. Our protocol consists of successive, independent measurements of each bit by entangling the ancilla with the cavity, then reading out and resetting the ancilla. Photon loss and ancilla readout errors can flip one or more bits, causing nontrivial errors in the outcome, but these errors have a traceable form which can be captured in a simple hidden Markov model. Relying on the independence of each bit measurement, we mitigate biases in ensembles of measurements, showing good agreement with the predictions of the model. The mitigation improves the average total variation distance error of Fock states from $13.5\%$ to $1.1\%$. We also show that the mitigation is efficiently scalable to an $M$-mode system provided that the errors are independent and sufficiently small. Our work motivates the development of new algorithms that utilize single-shot, high-fidelity PNR detectors.
△ Less
Submitted 10 February, 2021; v1 submitted 9 October, 2020;
originally announced October 2020.
-
Efficient multiphoton sampling of molecular vibronic spectra on a superconducting bosonic processor
Authors:
Christopher S. Wang,
Jacob C. Curtis,
Brian J. Lester,
Yaxing Zhang,
Yvonne Y. Gao,
Jessica Freeze,
Victor S. Batista,
Patrick H. Vaccaro,
Isaac L. Chuang,
Luigi Frunzio,
Liang Jiang,
S. M. Girvin,
Robert J. Schoelkopf
Abstract:
The efficient simulation of quantum systems is a primary motivating factor for develo** controllable quantum machines. For addressing systems with underlying bosonic structure, it is advantageous to utilize a naturally bosonic platform. Optical photons passing through linear networks may be configured to perform quantum simulation tasks, but the efficient preparation and detection of multiphoton…
▽ More
The efficient simulation of quantum systems is a primary motivating factor for develo** controllable quantum machines. For addressing systems with underlying bosonic structure, it is advantageous to utilize a naturally bosonic platform. Optical photons passing through linear networks may be configured to perform quantum simulation tasks, but the efficient preparation and detection of multiphoton quantum states of light in linear optical systems are challenging. Here, we experimentally implement a boson sampling protocol for simulating molecular vibronic spectra [Nature Photonics $\textbf{9}$, 615 (2015)] in a two-mode superconducting device. In addition to enacting the requisite set of Gaussian operations across both modes, we fulfill the scalability requirement by demonstrating, for the first time in any platform, a high-fidelity single-shot photon number resolving detection scheme capable of resolving up to 15 photons per mode. Furthermore, we exercise the capability of synthesizing non-Gaussian input states to simulate spectra of molecular ensembles in vibrational excited states. We show the re-programmability of our implementation by extracting the spectra of photoelectron processes in H$_2$O, O$_3$, NO$_2$, and SO$_2$. The capabilities highlighted in this work establish the superconducting architecture as a promising platform for bosonic simulations, and by combining them with tools such as Kerr interactions and engineered dissipation, enable the simulation of a wider class of bosonic systems.
△ Less
Submitted 16 December, 2019; v1 submitted 9 August, 2019;
originally announced August 2019.
