Showing 1–13 of 13 results for author: Chan, J

A Race Track Trapped-Ion Quantum Processor

Authors: S. A. Moses, C. H. Baldwin, M. S. Allman, R. Ancona, L. Ascarrunz, C. Barnes, J. Bartolotta, B. Bjork, P. Blanchard, M. Bohn, J. G. Bohnet, N. C. Brown, N. Q. Burdick, W. C. Burton, S. L. Campbell, J. P. Campora III, C. Carron, J. Chambers, J. W. Chan, Y. H. Chen, A. Chernoguzov, E. Chertkov, J. Colina, J. P. Curtis, R. Daniel , et al. (71 additional authors not shown)

Abstract: We describe and benchmark a new quantum charge-coupled device (QCCD) trapped-ion quantum computer based on a linear trap with periodic boundary conditions, which resembles a race track. The new system successfully incorporates several technologies crucial to future scalability, including electrode broadcasting, multi-layer RF routing, and magneto-optical trap (MOT) loading, while maintaining, and… ▽ More We describe and benchmark a new quantum charge-coupled device (QCCD) trapped-ion quantum computer based on a linear trap with periodic boundary conditions, which resembles a race track. The new system successfully incorporates several technologies crucial to future scalability, including electrode broadcasting, multi-layer RF routing, and magneto-optical trap (MOT) loading, while maintaining, and in some cases exceeding, the gate fidelities of previous QCCD systems. The system is initially operated with 32 qubits, but future upgrades will allow for more. We benchmark the performance of primitive operations, including an average state preparation and measurement error of 1.6(1)$\times 10^{-3}$, an average single-qubit gate infidelity of $2.5(3)\times 10^{-5}$, and an average two-qubit gate infidelity of $1.84(5)\times 10^{-3}$. The system-level performance of the quantum processor is assessed with mirror benchmarking, linear cross-entropy benchmarking, a quantum volume measurement of $\mathrm{QV}=2^{16}$, and the creation of 32-qubit entanglement in a GHZ state. We also tested application benchmarks including Hamiltonian simulation, QAOA, error correction on a repetition code, and dynamics simulations using qubit reuse. We also discuss future upgrades to the new system aimed at adding more qubits and capabilities. △ Less

Submitted 16 May, 2023; v1 submitted 5 May, 2023; originally announced May 2023.

Comments: 24 pages, 24 figures. Made some minor edits and added several more authors

Journal ref: Phys. Rev. X 13, 041052 (2023)

Thermalization of the Quantum Planar Rotor with external potential

Authors: Birthe Schrinski, Yoon Jun Chan, Björn Schrinski

Abstract: We study decoherence, diffusion, friction, and how they thermalize a planar rotor in the presence of an external potential. Representing the quantum master equation in terms of auxiliary Wigner functions in periodic phase space not only illustrates the thermalization process in a concise way, but also allows for an efficient numerical evaluation of the open quantum dynamics and its approximate ana… ▽ More We study decoherence, diffusion, friction, and how they thermalize a planar rotor in the presence of an external potential. Representing the quantum master equation in terms of auxiliary Wigner functions in periodic phase space not only illustrates the thermalization process in a concise way, but also allows for an efficient numerical evaluation of the open quantum dynamics and its approximate analytical description. In particular, we analytically and numerically verify the existence of a steady state that, in the high-temperature regime, closely approximates a Gibbs state. We also derive the proper classical limit of the planar rotor time evolution and present exemplary numerical studies to verify our results. △ Less

Submitted 27 July, 2022; v1 submitted 11 July, 2022; originally announced July 2022.

Comments: 10 pages, 4 figures

Solid-state heteronuclear multiple-quantum spectroscopy under a magic-angle spinning frequency of 150 kHz

Authors: Eric Chung-Yueh Yuan, Po-Wen Chen, Shing-Jong Huang, Mai-Liis Org, Ago Samoson, Jerry Chun Chung Chan

Abstract: We hereby demonstrate that 1H detected 15N-1H heteronuclear multiple-quantum spectroscopy can be carried out at a magic angle spinning frequency of 150 kHz. While the 15N-1H multiple-quantum coherences can be directly excited from the dipolar order created by the method of adiabatic demagnetization in the rotating frame, it is technically more advantageous to acquire the chemical shift evolution o… ▽ More We hereby demonstrate that 1H detected 15N-1H heteronuclear multiple-quantum spectroscopy can be carried out at a magic angle spinning frequency of 150 kHz. While the 15N-1H multiple-quantum coherences can be directly excited from the dipolar order created by the method of adiabatic demagnetization in the rotating frame, it is technically more advantageous to acquire the chemical shift evolution of the heteronuclear multiple-quantum coherence by two separate chemical shift evolution periods for 1H and 15N. We also show that the heteronuclear multiple-quantum correlation spectrum can be obtained by shearing the corresponding heteronuclear single-quantum correlation spectrum. △ Less

Submitted 6 April, 2022; originally announced April 2022.

Comments: 27 pages, 9 figures and 3 supporting figures

Application of Quantum Machine Learning using the Quantum Kernel Algorithm on High Energy Physics Analysis at the LHC

Authors: Sau Lan Wu, Shaojun Sun, Wen Guan, Chen Zhou, Jay Chan, Chi Lung Cheng, Tuan Pham, Yan Qian, Alex Zeng Wang, Rui Zhang, Miron Livny, Jennifer Glick, Panagiotis Kl. Barkoutsos, Stefan Woerner, Ivano Tavernelli, Federico Carminati, Alberto Di Meglio, Andy C. Y. Li, Joseph Lykken, Panagiotis Spentzouris, Samuel Yen-Chi Chen, Shinjae Yoo, Tzu-Chieh Wei

Abstract: Quantum machine learning could possibly become a valuable alternative to classical machine learning for applications in High Energy Physics by offering computational speed-ups. In this study, we employ a support vector machine with a quantum kernel estimator (QSVM-Kernel method) to a recent LHC flagship physics analysis: $t\bar{t}H$ (Higgs boson production in association with a top quark pair). In… ▽ More Quantum machine learning could possibly become a valuable alternative to classical machine learning for applications in High Energy Physics by offering computational speed-ups. In this study, we employ a support vector machine with a quantum kernel estimator (QSVM-Kernel method) to a recent LHC flagship physics analysis: $t\bar{t}H$ (Higgs boson production in association with a top quark pair). In our quantum simulation study using up to 20 qubits and up to 50000 events, the QSVM-Kernel method performs as well as its classical counterparts in three different platforms from Google Tensorflow Quantum, IBM Quantum and Amazon Braket. Additionally, using 15 qubits and 100 events, the application of the QSVM-Kernel method on the IBM superconducting quantum hardware approaches the performance of a noiseless quantum simulator. Our study confirms that the QSVM-Kernel method can use the large dimensionality of the quantum Hilbert space to replace the classical feature space in realistic physics datasets. △ Less

Submitted 9 September, 2021; v1 submitted 11 April, 2021; originally announced April 2021.

Journal ref: Phys. Rev. Research 3, 033221 (2021)

Application of Quantum Machine Learning using the Quantum Variational Classifier Method to High Energy Physics Analysis at the LHC on IBM Quantum Computer Simulator and Hardware with 10 qubits

Authors: Sau Lan Wu, Jay Chan, Wen Guan, Shaojun Sun, Alex Wang, Chen Zhou, Miron Livny, Federico Carminati, Alberto Di Meglio, Andy C. Y. Li, Joseph Lykken, Panagiotis Spentzouris, Samuel Yen-Chi Chen, Shinjae Yoo, Tzu-Chieh Wei

Abstract: One of the major objectives of the experimental programs at the LHC is the discovery of new physics. This requires the identification of rare signals in immense backgrounds. Using machine learning algorithms greatly enhances our ability to achieve this objective. With the progress of quantum technologies, quantum machine learning could become a powerful tool for data analysis in high energy physic… ▽ More One of the major objectives of the experimental programs at the LHC is the discovery of new physics. This requires the identification of rare signals in immense backgrounds. Using machine learning algorithms greatly enhances our ability to achieve this objective. With the progress of quantum technologies, quantum machine learning could become a powerful tool for data analysis in high energy physics. In this study, using IBM gate-model quantum computing systems, we employ the quantum variational classifier method in two recent LHC flagship physics analyses: $t\bar{t}H$ (Higgs boson production in association with a top quark pair) and $H\rightarrowμ^{+}μ^{-}$ (Higgs boson decays to two muons, probing the Higgs boson couplings to second-generation fermions). We have obtained early results with 10 qubits on the IBM quantum simulator and the IBM quantum hardware. With small training samples of 100 events on the quantum simulator, the quantum variational classifier method performs similarly to classical algorithms such as SVM (support vector machine) and BDT (boosted decision tree), which are often employed in LHC physics analyses. On the quantum hardware, the quantum variational classifier method has shown promising discrimination power, comparable to that on the quantum simulator. This study demonstrates that quantum machine learning has the ability to differentiate between signal and background in realistic physics datasets. We foresee the usage of quantum machine learning in future high-luminosity LHC physics analyses, including measurements of the Higgs boson self-couplings and searches for dark matter. △ Less

Submitted 21 August, 2021; v1 submitted 21 December, 2020; originally announced December 2020.

Highly efficient coupling from an optical fiber to a nanoscale silicon optomechanical cavity

Authors: Simon Groeblacher, Jeff T. Hill, Amir H. Safavi-Naeini, Jasper Chan, Oskar Painter

Abstract: We demonstrate highly efficient coupling of light from an optical fiber to a silicon photonic crystal optomechanical cavity. The fiber-to-cavity coupling utilizes a compact (L ~ 25 um) intermediate adiabatic coupler. The optical coupling is lithographically controlled, broadband, relatively insensitive to fiber misalignment, and allows for light to be transferred from an optical fiber to, in princ… ▽ More We demonstrate highly efficient coupling of light from an optical fiber to a silicon photonic crystal optomechanical cavity. The fiber-to-cavity coupling utilizes a compact (L ~ 25 um) intermediate adiabatic coupler. The optical coupling is lithographically controlled, broadband, relatively insensitive to fiber misalignment, and allows for light to be transferred from an optical fiber to, in principle, any photonic chip with refractive index greater than that of the optical fiber. Here we demonstrate single-sided cavity coupling with a total fiber-to-cavity optical power coupling efficiency of 85%. △ Less

Submitted 30 October, 2013; v1 submitted 4 September, 2013; originally announced September 2013.

Comments: 4 pages, 3 figures

Journal ref: Appl. Phys. Lett. 103, 181104 (2013)

Squeezing of light via reflection from a silicon micromechanical resonator

Authors: Amir H. Safavi-Naeini, Simon Groeblacher, Jeff T. Hill, Jasper Chan, Markus Aspelmeyer, Oskar Painter

Abstract: We present the measurement of squeezed light generation using an engineered optomechanical system fabricated from a silicon microchip and composed of a micromechanical resonator coupled to a nanophotonic cavity. Laser light is used to measure the fluctuations in the position of the mechanical resonator at a measurement rate comparable to the free dynamics of the mechanical resonator, and greater t… ▽ More We present the measurement of squeezed light generation using an engineered optomechanical system fabricated from a silicon microchip and composed of a micromechanical resonator coupled to a nanophotonic cavity. Laser light is used to measure the fluctuations in the position of the mechanical resonator at a measurement rate comparable to the free dynamics of the mechanical resonator, and greater than its thermal decoherence rate. By approaching the strong continuous measurement regime we observe, through homodyne detection, non-trivial modifications of the reflected light's vacuum fluctuation spectrum. In spite of the mechanical resonator's highly excited thermal state ($10,000$ phonons), we observe squeezing at the level of $4.5 \pm 0.5%$ below that of shot-noise over a few MHz bandwidth around the mechanical resonance frequency of 28 MHz. This squeezing is interpreted as an unambiguous quantum signature of radiation pressure shot-noise. △ Less

Submitted 13 March, 2013; v1 submitted 25 February, 2013; originally announced February 2013.

Comments: 24 pages, 18 figures

Laser noise in cavity-optomechanical cooling and thermometry

Authors: Amir H. Safavi-Naeini, Jasper Chan, Jeff T. Hill, Simon Groeblacher, Haixing Miao, Yanbei Chen, Markus Aspelmeyer, Oskar Painter

Abstract: We review and study the roles of quantum and classical fluctuations in recent cavity-optomechanical experiments which have now reached the quantum regime (mechanical phonon occupancy < 1) using resolved sideband laser cooling. In particular, both the laser noise heating of the mechanical resonator and the form of the optically transduced mechanical spectra, modified by quantum and classical laser… ▽ More We review and study the roles of quantum and classical fluctuations in recent cavity-optomechanical experiments which have now reached the quantum regime (mechanical phonon occupancy < 1) using resolved sideband laser cooling. In particular, both the laser noise heating of the mechanical resonator and the form of the optically transduced mechanical spectra, modified by quantum and classical laser noise squashing, are derived under various measurement conditions. Using this theory, we analyze our recent ground-state laser cooling and motional sideband asymmetry experiments with nanoscale optomechanical crystal resonators. △ Less

Submitted 9 October, 2012; originally announced October 2012.

Comments: 36 pages, 10 figures

Journal ref: New J. Phys. 15 035007 (2013)

Optimized optomechanical crystal cavity with acoustic radiation shield

Authors: Jasper Chan, Amir H. Safavi-Naeini, Jeff T. Hill, Sean Meenehan, Oskar Painter

Abstract: We present the design of an optomechanical crystal nanobeam cavity that combines finite-element simulation with numerical optimization, and considers the optomechanical coupling arising from both moving dielectric boundaries and the photo-elastic effect. Applying this methodology results in a nanobeam with an experimentally realized intrinsic optical Q-factor of 1.2x10^6, a mechanical frequency of… ▽ More We present the design of an optomechanical crystal nanobeam cavity that combines finite-element simulation with numerical optimization, and considers the optomechanical coupling arising from both moving dielectric boundaries and the photo-elastic effect. Applying this methodology results in a nanobeam with an experimentally realized intrinsic optical Q-factor of 1.2x10^6, a mechanical frequency of 5.1GHz, a mechanical Q-factor of 6.8x10^5 (at T=10K), and a zero-point-motion optomechanical coupling rate of g=1.1MHz. △ Less

Submitted 11 June, 2012; originally announced June 2012.

Comments: 4 pages, 4 figures

Journal ref: Appl. Phys. Lett. 101, 081115 (2012)

Coherent optical wavelength conversion via cavity-optomechanics

Authors: Jeff T. Hill, Amir H. Safavi-Naeini, Jasper Chan, Oskar Painter

Abstract: We theoretically propose and experimentally demonstrate coherent wavelength conversion of optical photons using photon-phonon translation in a cavity-optomechanical system. For an engineered silicon optomechanical crystal nanocavity supporting a 4 GHz localized phonon mode, optical signals in a 1.5 MHz bandwidth are coherently converted over a 11.2 THz frequency span between one cavity mode at wav… ▽ More We theoretically propose and experimentally demonstrate coherent wavelength conversion of optical photons using photon-phonon translation in a cavity-optomechanical system. For an engineered silicon optomechanical crystal nanocavity supporting a 4 GHz localized phonon mode, optical signals in a 1.5 MHz bandwidth are coherently converted over a 11.2 THz frequency span between one cavity mode at wavelength 1460 nm and a second cavity mode at 1545 nm with a 93% internal (2% external) peak efficiency. The thermal and quantum limiting noise involved in the conversion process is also analyzed, and in terms of an equivalent photon number signal level are found to correspond to an internal noise level of only 6 and 4x10-3 quanta, respectively. △ Less

Submitted 4 June, 2012; originally announced June 2012.

Comments: 11 pages, 7 figures, appendix

Journal ref: Nature Communications 3, 1196 (03 November 2012)

Measurement of the quantum zero-point motion of a nanomechanical resonator

Authors: Amir H. Safavi-Naeini, Jasper Chan, Jeff T. Hill, T. P. Mayer Alegre, Alex Krause, Oskar Painter

Abstract: We present optical sideband spectroscopy measurements of a mesoscopic mechanical oscillator cooled near its quantum ground state. The mechanical oscillator, corresponding to a 3.99GHz acoustic mode of a patterned silicon nanobeam, is coupled via radiation pressure to a pair of co-localized 200THz optical modes. The mechanical mode is cooled close to its quantum ground state from a bath temperature… ▽ More We present optical sideband spectroscopy measurements of a mesoscopic mechanical oscillator cooled near its quantum ground state. The mechanical oscillator, corresponding to a 3.99GHz acoustic mode of a patterned silicon nanobeam, is coupled via radiation pressure to a pair of co-localized 200THz optical modes. The mechanical mode is cooled close to its quantum ground state from a bath temperature of 18K using radiation pressure back-action stemming from the optical pum** of one of the optical cavity resonances. An optical probe beam, resonant with the second optical cavity resonance, is used to transduce the mechanical motion and determine the phonon occupancy of the mechanical mode. Measurement of the asymmetry between up-converted and down-converted photons of the probe beam yields directly the displacement noise power associated with the quantum zero-point motion of the mechanical oscillator, and provides an absolute calibration of the average phonon occupancy of the mechanical mode. △ Less

Submitted 23 August, 2011; originally announced August 2011.

Comments: 6 pages, 4 figures

Journal ref: Phys. Rev. Lett. 108, 033602 (2012)

Laser cooling of a nanomechanical oscillator into its quantum ground state

Authors: Jasper Chan, T. P. Mayer Alegre, Amir H. Safavi-Naeini, Jeff T. Hill, Alex Krause, Simon Groeblacher, Markus Aspelmeyer, Oskar Painter

Abstract: A patterned Si nanobeam is formed which supports co-localized acoustic and optical resonances that are coupled via radiation pressure. Starting from a bath temperature of T=20K, the 3.68GHz nanomechanical mode is cooled into its quantum mechanical ground state utilizing optical radiation pressure. The mechanical mode displacement fluctuations, imprinted on the transmitted cooling laser beam, indic… ▽ More A patterned Si nanobeam is formed which supports co-localized acoustic and optical resonances that are coupled via radiation pressure. Starting from a bath temperature of T=20K, the 3.68GHz nanomechanical mode is cooled into its quantum mechanical ground state utilizing optical radiation pressure. The mechanical mode displacement fluctuations, imprinted on the transmitted cooling laser beam, indicate that a final phonon mode occupancy of 0.85 +-0.04 is obtained. △ Less

Submitted 18 June, 2011; originally announced June 2011.

Comments: 18 pages, 10 figures

Journal ref: Nature 478, 89-92 (06 October 2011)

Electromagnetically Induced Transparency and Slow Light with Optomechanics

Authors: Amir H. Safavi-Naeini, Thiago P. Mayer Alegre, Jasper Chan, Matt Eichenfield, Martin Winger, Qiang Lin, Jeffrey T. Hill, Darrick Chang, Oskar Painter

Abstract: Controlling the interaction between localized optical and mechanical excitations has recently become possible following advances in micro- and nano-fabrication techniques. To date, most experimental studies of optomechanics have focused on measurement and control of the mechanical subsystem through its interaction with optics, and have led to the experimental demonstration of dynamical back-action… ▽ More Controlling the interaction between localized optical and mechanical excitations has recently become possible following advances in micro- and nano-fabrication techniques. To date, most experimental studies of optomechanics have focused on measurement and control of the mechanical subsystem through its interaction with optics, and have led to the experimental demonstration of dynamical back-action cooling and optical rigidity of the mechanical system. Conversely, the optical response of these systems is also modified in the presence of mechanical interactions, leading to strong nonlinear effects such as Electromagnetically Induced Transparency (EIT) and parametric normal-mode splitting. In atomic systems, seminal experiments and proposals to slow and stop the propagation of light, and their applicability to modern optical networks, and future quantum networks, have thrust EIT to the forefront of experimental study during the last two decades. In a similar fashion, here we use the optomechanical nonlinearity to control the velocity of light via engineered photon-phonon interactions. Our results demonstrate EIT and tunable optical delays in a nanoscale optomechanical crystal device, fabricated by simply etching holes into a thin film of silicon (Si). At low temperature (8.7 K), we show an optically-tunable delay of 50 ns with near-unity optical transparency, and superluminal light with a 1.4 microseconds signal advance. These results, while indicating significant progress towards an integrated quantum optomechanical memory, are also relevant to classical signal processing applications. Measurements at room temperature and in the analogous regime of Electromagnetically Induced Absorption (EIA) show the utility of these chip-scale optomechanical systems for optical buffering, amplification, and filtering of microwave-over-optical signals. △ Less

Submitted 14 December, 2010; v1 submitted 9 December, 2010; originally announced December 2010.

Comments: 15 pages, 9 figures

Journal ref: Nature 472, 69--73 (07 April 2011)