-
Quantum-centric Supercomputing for Materials Science: A Perspective on Challenges and Future Directions
Authors:
Yuri Alexeev,
Maximilian Amsler,
Paul Baity,
Marco Antonio Barroca,
Sanzio Bassini,
Torey Battelle,
Daan Camps,
David Casanova,
Young jai Choi,
Frederic T. Chong,
Charles Chung,
Chris Codella,
Antonio D. Corcoles,
James Cruise,
Alberto Di Meglio,
Jonathan Dubois,
Ivan Duran,
Thomas Eckl,
Sophia Economou,
Stephan Eidenbenz,
Bruce Elmegreen,
Clyde Fare,
Ismael Faro,
Cristina Sanz Fernández,
Rodrigo Neumann Barros Ferreira
, et al. (102 additional authors not shown)
Abstract:
Computational models are an essential tool for the design, characterization, and discovery of novel materials. Hard computational tasks in materials science stretch the limits of existing high-performance supercomputing centers, consuming much of their simulation, analysis, and data resources. Quantum computing, on the other hand, is an emerging technology with the potential to accelerate many of…
▽ More
Computational models are an essential tool for the design, characterization, and discovery of novel materials. Hard computational tasks in materials science stretch the limits of existing high-performance supercomputing centers, consuming much of their simulation, analysis, and data resources. Quantum computing, on the other hand, is an emerging technology with the potential to accelerate many of the computational tasks needed for materials science. In order to do that, the quantum technology must interact with conventional high-performance computing in several ways: approximate results validation, identification of hard problems, and synergies in quantum-centric supercomputing. In this paper, we provide a perspective on how quantum-centric supercomputing can help address critical computational problems in materials science, the challenges to face in order to solve representative use cases, and new suggested directions.
△ Less
Submitted 14 December, 2023;
originally announced December 2023.
-
Matching and maximum likelihood decoding of a multi-round subsystem quantum error correction experiment
Authors:
Neereja Sundaresan,
Theodore J. Yoder,
Youngseok Kim,
Muyuan Li,
Edward H. Chen,
Grace Harper,
Ted Thorbeck,
Andrew W. Cross,
Antonio D. Córcoles,
Maika Takita
Abstract:
Quantum error correction offers a promising path for performing quantum computations with low errors. Although a fully fault-tolerant execution of a quantum algorithm remains unrealized, recent experimental developments, along with improvements in control electronics, are enabling increasingly advanced demonstrations of the necessary operations for applying quantum error correction. Here, we perfo…
▽ More
Quantum error correction offers a promising path for performing quantum computations with low errors. Although a fully fault-tolerant execution of a quantum algorithm remains unrealized, recent experimental developments, along with improvements in control electronics, are enabling increasingly advanced demonstrations of the necessary operations for applying quantum error correction. Here, we perform quantum error correction on superconducting qubits connected in a heavy-hexagon lattice. The full processor can encode a logical qubit with distance three and perform several rounds of fault-tolerant syndrome measurements that allow the correction of any single fault in the circuitry. Furthermore, by using dynamic circuits and classical computation as part of our syndrome extraction protocols, we can exploit real-time feedback to reduce the impact of energy relaxation error in the syndrome and flag qubits. We show that the logical error varies depending on the use of a perfect matching decoder compared to a maximum likelihood decoder. We observe a logical error per syndrome measurement round as low as $\sim0.04$ for the matching decoder and as low as $\sim0.03$ for the maximum likelihood decoder. Our results suggest that more significant improvements to decoders are likely on the horizon as quantum hardware has reached a new stage of development towards fully fault-tolerant operations.
△ Less
Submitted 19 April, 2022; v1 submitted 14 March, 2022;
originally announced March 2022.
-
Calibrated decoders for experimental quantum error correction
Authors:
Edward H. Chen,
Theodore J. Yoder,
Youngseok Kim,
Neereja Sundaresan,
Srikanth Srinivasan,
Muyuan Li,
Antonio D. Córcoles,
Andrew W. Cross,
Maika Takita
Abstract:
Arbitrarily long quantum computations require quantum memories that can be repeatedly measured without being corrupted. Here, we preserve the state of a quantum memory, notably with the additional use of flagged error events. All error events were extracted using fast, mid-circuit measurements and resets of the physical qubits. Among the error decoders we considered, we introduce a perfect matchin…
▽ More
Arbitrarily long quantum computations require quantum memories that can be repeatedly measured without being corrupted. Here, we preserve the state of a quantum memory, notably with the additional use of flagged error events. All error events were extracted using fast, mid-circuit measurements and resets of the physical qubits. Among the error decoders we considered, we introduce a perfect matching decoder that was calibrated from measurements containing up to size-4 correlated events. To compare the decoders, we used a partial post-selection scheme shown to retain ten times more data than full post-selection. We observed logical errors per round of $2.2\pm0.1\times10^{-2}$ (decoded without post-selection) and $5.1\pm0.7\times10^{-4}$ (full post-selection), which was less than the physical measurement error of $7\times10^{-3}$ and therefore surpasses a pseudo-threshold for repeated logical measurements.
△ Less
Submitted 8 October, 2021;
originally announced October 2021.
-
Covariant quantum kernels for data with group structure
Authors:
Jennifer R. Glick,
Tanvi P. Gujarati,
Antonio D. Corcoles,
Youngseok Kim,
Abhinav Kandala,
Jay M. Gambetta,
Kristan Temme
Abstract:
The use of kernel functions is a common technique to extract important features from data sets. A quantum computer can be used to estimate kernel entries as transition amplitudes of unitary circuits. Quantum kernels exist that, subject to computational hardness assumptions, cannot be computed classically. It is an important challenge to find quantum kernels that provide an advantage in the classif…
▽ More
The use of kernel functions is a common technique to extract important features from data sets. A quantum computer can be used to estimate kernel entries as transition amplitudes of unitary circuits. Quantum kernels exist that, subject to computational hardness assumptions, cannot be computed classically. It is an important challenge to find quantum kernels that provide an advantage in the classification of real-world data. We introduce a class of quantum kernels that can be used for data with a group structure. The kernel is defined in terms of a unitary representation of the group and a fiducial state that can be optimized using a technique called kernel alignment. We apply this method to a learning problem on a coset-space that embodies the structure of many essential learning problems on groups. We implement the learning algorithm with $27$ qubits on a superconducting processor.
△ Less
Submitted 21 March, 2022; v1 submitted 7 May, 2021;
originally announced May 2021.
-
Hardware-efficient random circuits to classify noise in a multi-qubit system
Authors:
**-Sung Kim,
Lev S. Bishop,
Antonio D. Corcoles,
Seth Merkel,
John A. Smolin,
Sarah Sheldon
Abstract:
In this work we extend a multi-qubit benchmarking technique known as the Binned Output Generation (BOG) in order to discriminate between coherent and incoherent noise sources in the multi-qubit regime. While methods exist to discriminate coherent from incoherent noise at the single and few-qubit level, these methods scale poorly beyond a few qubits or must make assumptions about the form of the no…
▽ More
In this work we extend a multi-qubit benchmarking technique known as the Binned Output Generation (BOG) in order to discriminate between coherent and incoherent noise sources in the multi-qubit regime. While methods exist to discriminate coherent from incoherent noise at the single and few-qubit level, these methods scale poorly beyond a few qubits or must make assumptions about the form of the noise. On the other end of the spectrum, system-level benchmarking techniques exist, but fail to discriminate between coherent and incoherent noise sources. We experimentally verify the BOG against Randomized Benchmarking (RB) (the industry standard benchmarking technique) in the two-qubit regime, then apply this technique to a six qubit linear chain, a regime currently inaccessible to RB. In this experiment we inject an instantaneous coherent Z-type noise on each qubit and demonstrate that the measured coherent noise scales correctly with the magnitude of the injected noise, while the measured incoherent noise remains unchanged as expected. This demonstrates a robust technique to measure coherent errors in a variety of hardware.
△ Less
Submitted 22 April, 2021; v1 submitted 20 April, 2021;
originally announced April 2021.
-
Circuit quantum electrodynamics (cQED) with modular quasi-lumped models
Authors:
Zlatko K. Minev,
Thomas G. McConkey,
Maika Takita,
Antonio D. Corcoles,
Jay M. Gambetta
Abstract:
Extracting the Hamiltonian of interacting quantum-information processing systems is a keystone problem in the realization of complex phenomena and large-scale quantum computers. The remarkable growth of the field increasingly requires precise, widely-applicable, and modular methods that can model the quantum electrodynamics of the physical circuits, and even of their more-subtle renormalization ef…
▽ More
Extracting the Hamiltonian of interacting quantum-information processing systems is a keystone problem in the realization of complex phenomena and large-scale quantum computers. The remarkable growth of the field increasingly requires precise, widely-applicable, and modular methods that can model the quantum electrodynamics of the physical circuits, and even of their more-subtle renormalization effects. Here, we present a computationally-efficient method satisfying these criteria. The method partitions a quantum device into compact lumped or quasi-distributed cells. Each is first simulated individually. The composite system is then reduced and mapped to a set of simple subsystem building blocks and their pairwise interactions. The method operates within the quasi-lumped approximation and, with no further approximation, systematically accounts for constraints, couplings, parameter renormalizations, and non-perturbative loading effects. We experimentally validate the method on large-scale, state-of-the-art superconducting quantum processors. We find that the full method improves the experimental agreement by a factor of two over taking standard coupling approximations when tested on the most sensitive and dressed Hamiltonian parameters of the measured devices.
△ Less
Submitted 18 March, 2021;
originally announced March 2021.
-
Exploiting dynamic quantum circuits in a quantum algorithm with superconducting qubits
Authors:
Antonio D. Corcoles,
Maika Takita,
Ken Inoue,
Scott Lekuch,
Zlatko K. Minev,
Jerry M. Chow,
Jay M. Gambetta
Abstract:
The execution of quantum circuits on real systems has largely been limited to those which are simply time-ordered sequences of unitary operations followed by a projective measurement. As hardware platforms for quantum computing continue to mature in size and capability, it is imperative to enable quantum circuits beyond their conventional construction. Here we break into the realm of dynamic quant…
▽ More
The execution of quantum circuits on real systems has largely been limited to those which are simply time-ordered sequences of unitary operations followed by a projective measurement. As hardware platforms for quantum computing continue to mature in size and capability, it is imperative to enable quantum circuits beyond their conventional construction. Here we break into the realm of dynamic quantum circuits on a superconducting-based quantum system. Dynamic quantum circuits involve not only the evolution of the quantum state throughout the computation, but also periodic measurements of a subset of qubits mid-circuit and concurrent processing of the resulting classical information within timescales shorter than the execution times of the circuits. Using noisy quantum hardware, we explore one of the most fundamental quantum algorithms, quantum phase estimation, in its adaptive version, which exploits dynamic circuits, and compare the results to a non-adaptive implementation of the same algorithm. We demonstrate that the version of real-time quantum computing with dynamic circuits can offer a substantial and tangible advantage when noise and latency are sufficiently low in the system, opening the door to a new realm of available algorithms on real quantum systems.
△ Less
Submitted 2 February, 2021;
originally announced February 2021.
-
Challenges and Opportunities of Near-Term Quantum Computing Systems
Authors:
A. D. Corcoles,
A. Kandala,
A. Javadi-Abhari,
D. T. McClure,
A. W. Cross,
K. Temme,
P. D. Nation,
M. Steffen,
J. M. Gambetta
Abstract:
The concept of quantum computing has inspired a whole new generation of scientists, including physicists, engineers, and computer scientists, to fundamentally change the landscape of information technology. With experimental demonstrations stretching back more than two decades, the quantum computing community has achieved a major milestone over the past few years: the ability to build systems that…
▽ More
The concept of quantum computing has inspired a whole new generation of scientists, including physicists, engineers, and computer scientists, to fundamentally change the landscape of information technology. With experimental demonstrations stretching back more than two decades, the quantum computing community has achieved a major milestone over the past few years: the ability to build systems that are stretching the limits of what can be classically simulated, and which enable cloud-based research for a wide range of scientists, thus increasing the pool of talent exploring early quantum systems. While such noisy near-term quantum computing systems fall far short of the requirements for fault-tolerant systems, they provide unique testbeds for exploring the opportunities for quantum applications. Here we highlight the facets associated with these systems, including quantum software, cloud access, benchmarking quantum systems, error correction and mitigation in such systems, and understanding the complexity of quantum circuits and how early quantum applications can run on near term quantum computers.
△ Less
Submitted 7 October, 2019;
originally announced October 2019.
-
Active protection of a superconducting qubit with an interferometric Josephson isolator
Authors:
Baleegh Abdo,
Nicholas T. Bronn,
Oblesh **ka,
Salvatore Olivadese,
Antonio D. Corcoles,
Vivekananda P. Adiga,
Markus Brink,
Russell E. Lake,
Xian Wu,
David P. Pappas,
Jerry M. Chow
Abstract:
Nonreciprocal microwave devices play several critical roles in high-fidelity, quantum-nondemolition (QND) measurement schemes. They separate input from output, impose unidirectional routing of readout signals, and protect the quantum systems from unwanted noise originated by the output chain. However, state-of-the-art, cryogenic circulators and isolators are disadvantageous in scalable superconduc…
▽ More
Nonreciprocal microwave devices play several critical roles in high-fidelity, quantum-nondemolition (QND) measurement schemes. They separate input from output, impose unidirectional routing of readout signals, and protect the quantum systems from unwanted noise originated by the output chain. However, state-of-the-art, cryogenic circulators and isolators are disadvantageous in scalable superconducting quantum processors because they use magnetic materials and strong magnetic fields. Here, we realize an active isolator formed by coupling two nondegenerate Josephson mixers in an interferometric scheme. Nonreciprocity is generated by applying a phase gradient between the same-frequency pumps feeding the Josephson mixers, which play the role of the magnetic field in a Faraday medium. To demonstrate the applicability of this Josephson-based isolator for quantum measurements, we incorporate it into the output line of a superconducting qubit, coupled to a fast resonator and a Purcell filter. We also utilize a wideband, superconducting directional coupler for coupling the readout signals into and out of the qubit-resonator system and a quantum-limited Josephson amplifier for boosting the readout fidelity. By using this novel quantum setup, we demonstrate fast, high-fidelity, QND measurements of the qubit while providing more than 20 dB of protection against amplified noise reflected off the Josephson amplifier.
△ Less
Submitted 16 October, 2018;
originally announced October 2018.
-
Qiskit Backend Specifications for OpenQASM and OpenPulse Experiments
Authors:
David C. McKay,
Thomas Alexander,
Luciano Bello,
Michael J. Biercuk,
Lev Bishop,
Jiayin Chen,
Jerry M. Chow,
Antonio D. Córcoles,
Daniel Egger,
Stefan Filipp,
Juan Gomez,
Michael Hush,
Ali Javadi-Abhari,
Diego Moreda,
Paul Nation,
Brent Paulovicks,
Erick Winston,
Christopher J. Wood,
James Wootton,
Jay M. Gambetta
Abstract:
As interest in quantum computing grows, there is a pressing need for standardized API's so that algorithm designers, circuit designers, and physicists can be provided a common reference frame for designing, executing, and optimizing experiments. There is also a need for a language specification that goes beyond gates and allows users to specify the time dynamics of a quantum experiment and recover…
▽ More
As interest in quantum computing grows, there is a pressing need for standardized API's so that algorithm designers, circuit designers, and physicists can be provided a common reference frame for designing, executing, and optimizing experiments. There is also a need for a language specification that goes beyond gates and allows users to specify the time dynamics of a quantum experiment and recover the time dynamics of the output. In this document we provide a specification for a common interface to backends (simulators and experiments) and a standarized data structure (Qobj --- quantum object) for sending experiments to those backends via Qiskit. We also introduce OpenPulse, a language for specifying pulse level control (i.e. control of the continuous time dynamics) of a general quantum device independent of the specific hardware implementation.
△ Less
Submitted 10 September, 2018;
originally announced September 2018.
-
Extending the computational reach of a noisy superconducting quantum processor
Authors:
Abhinav Kandala,
Kristan Temme,
Antonio D. Corcoles,
Antonio Mezzacapo,
Jerry M. Chow,
Jay M. Gambetta
Abstract:
Quantum computation, a completely different paradigm of computing, benefits from theoretically proven speed-ups for certain problems and opens up the possibility of exactly studying the properties of quantum systems. Yet, because of the inherent fragile nature of the physical computing elements, qubits, achieving quantum advantages over classical computation requires extremely low error rates for…
▽ More
Quantum computation, a completely different paradigm of computing, benefits from theoretically proven speed-ups for certain problems and opens up the possibility of exactly studying the properties of quantum systems. Yet, because of the inherent fragile nature of the physical computing elements, qubits, achieving quantum advantages over classical computation requires extremely low error rates for qubit operations as well as a significant overhead of physical qubits, in order to realize fault-tolerance via quantum error correction. However, recent theoretical work has shown that the accuracy of computation based off expectation values of quantum observables can be enhanced through an extrapolation of results from a collection of varying noisy experiments. Here, we demonstrate this error mitigation protocol on a superconducting quantum processor, enhancing its computational capability, with no additional hardware modifications. We apply the protocol to mitigate errors on canonical single- and two-qubit experiments and then extend its application to the variational optimization of Hamiltonians for quantum chemistry and magnetism. We effectively demonstrate that the suppression of incoherent errors helps unearth otherwise inaccessible accuracies to the variational solutions using our noisy processor. These results demonstrate that error mitigation techniques will be critical to significantly enhance the capabilities of near-term quantum computing hardware.
△ Less
Submitted 11 May, 2018;
originally announced May 2018.
-
Supervised learning with quantum enhanced feature spaces
Authors:
Vojtech Havlicek,
Antonio D. Córcoles,
Kristan Temme,
Aram W. Harrow,
Abhinav Kandala,
Jerry M. Chow,
Jay M. Gambetta
Abstract:
Machine learning and quantum computing are two technologies each with the potential for altering how computation is performed to address previously untenable problems. Kernel methods for machine learning are ubiquitous for pattern recognition, with support vector machines (SVMs) being the most well-known method for classification problems. However, there are limitations to the successful solution…
▽ More
Machine learning and quantum computing are two technologies each with the potential for altering how computation is performed to address previously untenable problems. Kernel methods for machine learning are ubiquitous for pattern recognition, with support vector machines (SVMs) being the most well-known method for classification problems. However, there are limitations to the successful solution to such problems when the feature space becomes large, and the kernel functions become computationally expensive to estimate. A core element to computational speed-ups afforded by quantum algorithms is the exploitation of an exponentially large quantum state space through controllable entanglement and interference. Here, we propose and experimentally implement two novel methods on a superconducting processor. Both methods represent the feature space of a classification problem by a quantum state, taking advantage of the large dimensionality of quantum Hilbert space to obtain an enhanced solution. One method, the quantum variational classifier builds on [1,2] and operates through using a variational quantum circuit to classify a training set in direct analogy to conventional SVMs. In the second, a quantum kernel estimator, we estimate the kernel function and optimize the classifier directly. The two methods present a new class of tools for exploring the applications of noisy intermediate scale quantum computers [3] to machine learning.
△ Less
Submitted 5 June, 2018; v1 submitted 30 April, 2018;
originally announced April 2018.
-
Experimental demonstration of fault-tolerant state preparation with superconducting qubits
Authors:
Maika Takita,
Andrew W. Cross,
A. D. Córcoles,
Jerry M. Chow,
Jay M. Gambetta
Abstract:
Robust quantum computation requires encoding delicate quantum information into degrees of freedom that are hard for the environment to change. Quantum encodings have been demonstrated in many physical systems by observing and correcting storage errors, but applications require not just storing information; we must accurately compute even with faulty operations. The theory of fault-tolerant quantum…
▽ More
Robust quantum computation requires encoding delicate quantum information into degrees of freedom that are hard for the environment to change. Quantum encodings have been demonstrated in many physical systems by observing and correcting storage errors, but applications require not just storing information; we must accurately compute even with faulty operations. The theory of fault-tolerant quantum computing illuminates a way forward by providing a foundation and collection of techniques for limiting the spread of errors. Here we implement one of the smallest quantum codes in a five-qubit superconducting transmon device and demonstrate fault-tolerant state preparation. We characterize the resulting codewords through quantum process tomography and study the free evolution of the logical observables. Our results are consistent with fault-tolerant state preparation in a protected qubit subspace.
△ Less
Submitted 25 May, 2017;
originally announced May 2017.
-
Experimental demonstration of a resonator-induced phase gate in a multi-qubit circuit QED system
Authors:
Hanhee Paik,
A. Mezzacapo,
Martin Sandberg,
D. T. McClure,
B. Abdo,
A. D. Corcoles,
O. Dial,
D. F. Bogorin,
B. L. T. Plourde,
M. Steffen,
A. W. Cross,
J. M. Gambetta,
Jerry M. Chow
Abstract:
The resonator-induced phase (RIP) gate is a multi-qubit entangling gate that allows a high degree of flexibility in qubit frequencies, making it attractive for quantum operations in large-scale architectures. We experimentally realize the RIP gate with four superconducting qubits in a three-dimensional (3D) circuit-quantum electrodynamics architecture, demonstrating high-fidelity controlled-Z (CZ)…
▽ More
The resonator-induced phase (RIP) gate is a multi-qubit entangling gate that allows a high degree of flexibility in qubit frequencies, making it attractive for quantum operations in large-scale architectures. We experimentally realize the RIP gate with four superconducting qubits in a three-dimensional (3D) circuit-quantum electrodynamics architecture, demonstrating high-fidelity controlled-Z (CZ) gates between all possible pairs of qubits from two different 4-qubit devices in pair subspaces. These qubits are arranged within a wide range of frequency detunings, up to as large as 1.8 GHz. We further show a dynamical multi-qubit refocusing scheme in order to isolate out 2-qubit interactions, and combine them to generate a four-qubit Greenberger-Horne-Zeilinger state.
△ Less
Submitted 2 June, 2016;
originally announced June 2016.
-
Demonstration of weight-four parity measurements in the surface code architecture
Authors:
Maika Takita,
A. D. Córcoles,
Easwar Magesan,
Baleegh Abdo,
Markus Brink,
Andrew Cross,
Jerry M. Chow,
Jay M. Gambetta
Abstract:
We present parity measurements on a five-qubit lattice with connectivity amenable to the surface code quantum error correction architecture. Using all-microwave controls of superconducting qubits coupled via resonators, we encode the parities of four data qubit states in either the $X$- or the $Z$-basis. Given the connectivity of the lattice, we perform full characterization of the static $Z$-inte…
▽ More
We present parity measurements on a five-qubit lattice with connectivity amenable to the surface code quantum error correction architecture. Using all-microwave controls of superconducting qubits coupled via resonators, we encode the parities of four data qubit states in either the $X$- or the $Z$-basis. Given the connectivity of the lattice, we perform full characterization of the static $Z$-interactions within the set of five qubits, as well as dynamical $Z$-interactions brought along by single- and two-qubit microwave drives. The parity measurements are significantly improved by modifying the microwave two-qubit gates to dynamically remove non-ideal $Z$ errors.
△ Less
Submitted 28 April, 2017; v1 submitted 4 May, 2016;
originally announced May 2016.
-
Characterizing a Four-Qubit Planar Lattice for Arbitrary Error Detection
Authors:
Jerry M. Chow,
Srikanth J. Srinivasan,
Easwar Magesan,
A D. Corcoles,
David W. Abraham,
Jay M. Gambetta,
Matthias Steffen
Abstract:
Quantum error correction will be a necessary component towards realizing scalable quantum computers with physical qubits. Theoretically, it is possible to perform arbitrarily long computations if the error rate is below a threshold value. The two-dimensional surface code permits relatively high fault-tolerant thresholds at the ~1% level, and only requires a latticed network of qubits with nearest-…
▽ More
Quantum error correction will be a necessary component towards realizing scalable quantum computers with physical qubits. Theoretically, it is possible to perform arbitrarily long computations if the error rate is below a threshold value. The two-dimensional surface code permits relatively high fault-tolerant thresholds at the ~1% level, and only requires a latticed network of qubits with nearest-neighbor interactions. Superconducting qubits have continued to steadily improve in coherence, gate, and readout fidelities, to become a leading candidate for implementation into larger quantum networks. Here we describe characterization experiments and calibration of a system of four superconducting qubits arranged in a planar lattice, amenable to the surface code. Insights into the particular qubit design and comparison between simulated parameters and experimentally determined parameters are given. Single- and two-qubit gate tune-up procedures are described and results for simultaneously benchmarking pairs of two-qubit gates are given. All controls are eventually used for an arbitrary error detection protocol described in separate work [Corcoles et al., Nature Communications, 6, 2015]
△ Less
Submitted 9 September, 2015;
originally announced September 2015.
-
Broadband Filters for Abatement of Spontaneous Emission in Circuit Quantum Electrodynamics
Authors:
Nicholas T. Bronn,
Yanbing Liu,
Jared B. Hertzberg,
Antonio D. Córcoles,
Andrew A. Houck,
Jay M. Gambetta,
Jerry M. Chow
Abstract:
The ability to perform fast, high-fidelity readout of quantum bits (qubits) is essential to the goal of building a quantum computer. However, coupling a fast measurement channel to a superconducting qubit typically also speeds up its relaxation via spontaneous emission. Here we use impedance engineering to design a filter by which photons may easily leave the resonator at the cavity frequency but…
▽ More
The ability to perform fast, high-fidelity readout of quantum bits (qubits) is essential to the goal of building a quantum computer. However, coupling a fast measurement channel to a superconducting qubit typically also speeds up its relaxation via spontaneous emission. Here we use impedance engineering to design a filter by which photons may easily leave the resonator at the cavity frequency but not at the qubit frequency. We implement this broadband filter in both an on-chip and off-chip configuration.
△ Less
Submitted 29 October, 2015; v1 submitted 7 August, 2015;
originally announced August 2015.
-
Machine learning for discriminating quantum measurement trajectories and improving readout
Authors:
Easwar Magesan,
Jay M. Gambetta,
A. D. Córcoles,
Jerry M. Chow
Abstract:
High-fidelity measurements are important for the physical implementation of quantum information protocols. Current methods for classifying measurement trajectories in superconducting qubit systems produce fidelities that are systematically lower than those predicted by experimental parameters. Here, we place current classification methods within the framework of machine learning algorithms and imp…
▽ More
High-fidelity measurements are important for the physical implementation of quantum information protocols. Current methods for classifying measurement trajectories in superconducting qubit systems produce fidelities that are systematically lower than those predicted by experimental parameters. Here, we place current classification methods within the framework of machine learning algorithms and improve on them by investigating more sophisticated ML approaches. We find that non-linear algorithms and clustering methods produce significantly higher assignment fidelities that help close the gap to the fidelity achievable under ideal noise conditions. Clustering methods group trajectories into natural subsets within the data, which allows for the diagnosis of specific systematic errors. We find large clusters in the data associated with relaxation processes and show these are the main source of discrepancy between our experimental and achievable fidelities. These error diagnosis techniques help provide a concrete path forward to improve qubit measurements.
△ Less
Submitted 24 November, 2014; v1 submitted 18 November, 2014;
originally announced November 2014.
-
Detecting arbitrary quantum errors via stabilizer measurements on a sublattice of the surface code
Authors:
A. D. Córcoles,
Easwar Magesan,
Srikanth J. Srinivasan,
Andrew W. Cross,
M. Steffen,
Jay M. Gambetta,
Jerry M. Chow
Abstract:
To build a fault-tolerant quantum computer, it is necessary to implement a quantum error correcting code. Such codes rely on the ability to extract information about the quantum error syndrome while not destroying the quantum information encoded in the system. Stabilizer codes are attractive solutions to this problem, as they are analogous to classical linear codes, have simple and easily computed…
▽ More
To build a fault-tolerant quantum computer, it is necessary to implement a quantum error correcting code. Such codes rely on the ability to extract information about the quantum error syndrome while not destroying the quantum information encoded in the system. Stabilizer codes are attractive solutions to this problem, as they are analogous to classical linear codes, have simple and easily computed encoding networks, and allow efficient syndrome extraction. In these codes, syndrome extraction is performed via multi-qubit stabilizer measurements, which are bit and phase parity checks up to local operations. Previously, stabilizer codes have been realized in nuclei, trapped-ions, and superconducting qubits. However these implementations lack the ability to perform fault-tolerant syndrome extraction which continues to be a challenge for all physical quantum computing systems. Here we experimentally demonstrate a key step towards this problem by using a two-by-two lattice of superconducting qubits to perform syndrome extraction and arbitrary error detection via simultaneous quantum non-demolition stabilizer measurements. This lattice represents a primitive tile for the surface code, which is a promising stabilizer code for scalable quantum computing. Furthermore, we successfully show the preservation of an entangled state in the presence of an arbitrary applied error through high-fidelity syndrome measurement. Our results bolster the promise of employing lattices of superconducting qubits for larger-scale fault-tolerant quantum computing.
△ Less
Submitted 23 October, 2014;
originally announced October 2014.
-
Improved superconducting qubit coherence using titanium nitride
Authors:
J. Chang,
M. R. Vissers,
A. D. Corcoles,
M. Sandberg,
J. Gao,
David W. Abraham,
Jerry M. Chow,
Jay M. Gambetta,
M. B. Rothwell,
G. A. Keefe,
Matthias Steffen,
D. P. Pappas
Abstract:
We demonstrate enhanced relaxation and dephasing times of transmon qubits, up to ~ 60 μs by fabricating the interdigitated shunting capacitors using titanium nitride (TiN). Compared to lift-off aluminum deposited simultaneously with the Josephson junction, this represents as much as a six-fold improvement and provides evidence that previous planar transmon coherence times are limited by surface lo…
▽ More
We demonstrate enhanced relaxation and dephasing times of transmon qubits, up to ~ 60 μs by fabricating the interdigitated shunting capacitors using titanium nitride (TiN). Compared to lift-off aluminum deposited simultaneously with the Josephson junction, this represents as much as a six-fold improvement and provides evidence that previous planar transmon coherence times are limited by surface losses from two-level system (TLS) defects residing at or near interfaces. Concurrently, we observe an anomalous temperature dependent frequency shift of TiN resonators which is inconsistent with the predicted TLS model.
△ Less
Submitted 17 March, 2013;
originally announced March 2013.
-
Self-Consistent Quantum Process Tomography
Authors:
Seth T. Merkel,
Jay M. Gambetta,
John A. Smolin,
S. Poletto,
A. D. Córcoles,
B. R. Johnson,
Colm A. Ryan,
M. Steffen
Abstract:
Quantum process tomography is a necessary tool for verifying quantum gates and diagnosing faults in architectures and gate design. We show that the standard approach of process tomography is grossly inaccurate in the case where the states and measurement operators used to interrogate the system are generated by gates that have some systematic error, a situation all but unavoidable in any practical…
▽ More
Quantum process tomography is a necessary tool for verifying quantum gates and diagnosing faults in architectures and gate design. We show that the standard approach of process tomography is grossly inaccurate in the case where the states and measurement operators used to interrogate the system are generated by gates that have some systematic error, a situation all but unavoidable in any practical setting. These errors in tomography can not be fully corrected through oversampling or by performing a larger set of experiments. We present an alternative method for tomography to reconstruct an entire library of gates in a self-consistent manner. The essential ingredient is to define a likelihood function that assumes nothing about the gates used for preparation and measurement. In order to make the resulting optimization tractable we linearize about the target, a reasonable approximation when benchmarking a quantum computer as opposed to probing a black-box function.
△ Less
Submitted 1 November, 2012;
originally announced November 2012.
-
Process verification of two-qubit quantum gates by randomized benchmarking
Authors:
A. D. Córcoles,
Jay M. Gambetta,
Jerry M. Chow,
John A. Smolin,
Matthew Ware,
J. D. Strand,
B. L. T. Plourde,
M. Steffen
Abstract:
We implement a complete randomized benchmarking protocol on a system of two superconducting qubits. The protocol consists of randomizing over gates in the Clifford group, which experimentally are generated via an improved two-qubit cross-resonance gate implementation and single-qubit unitaries. From this we extract an optimal average error per Clifford of 0.0936. We also perform an interleaved exp…
▽ More
We implement a complete randomized benchmarking protocol on a system of two superconducting qubits. The protocol consists of randomizing over gates in the Clifford group, which experimentally are generated via an improved two-qubit cross-resonance gate implementation and single-qubit unitaries. From this we extract an optimal average error per Clifford of 0.0936. We also perform an interleaved experiment, alternating our optimal two-qubit gate with random two-qubit Clifford gates, to obtain a two-qubit gate error of 0.0653. We compare these values with a two-qubit gate error of ~0.12 obtained from quantum process tomography, which is likely limited by state preparation and measurement errors.
△ Less
Submitted 2 November, 2012; v1 submitted 25 October, 2012;
originally announced October 2012.
-
Entanglement of two superconducting qubits in a waveguide cavity via monochromatic two-photon excitation
Authors:
S. Poletto,
Jay M. Gambetta,
Seth T. Merkel,
John A. Smolin,
Jerry M. Chow,
A. D. Corcoles,
George A. Keefe,
Mary B. Rothwell,
J. R. Rozen,
D. W. Abraham,
Chad Rigetti,
M. Steffen
Abstract:
We report a system where fixed interactions between non-computational levels make bright the otherwise forbidden two-photon 00 --> 11 transition. The system is formed by hand selection and assembly of two discrete component transmon-style superconducting qubits inside a rectangular microwave cavity. The application of a monochromatic drive tuned to this transition induces two-photon Rabi-like osci…
▽ More
We report a system where fixed interactions between non-computational levels make bright the otherwise forbidden two-photon 00 --> 11 transition. The system is formed by hand selection and assembly of two discrete component transmon-style superconducting qubits inside a rectangular microwave cavity. The application of a monochromatic drive tuned to this transition induces two-photon Rabi-like oscillations between the ground and doubly-excited states via the Bell basis. The system therefore allows all-microwave two-qubit universal control with the same techniques and hardware required for single qubit control. We report Ramsey-like and spin echo sequences with the generated Bell states, and measure a two-qubit gate fidelity of 90% (unconstrained) and 86% (maximum likelihood estimator).
△ Less
Submitted 12 November, 2012; v1 submitted 6 August, 2012;
originally announced August 2012.
-
Characterization of addressability by simultaneous randomized benchmarking
Authors:
Jay M. Gambetta,
A. D. Corcoles,
S. T. Merkel,
B. R. Johnson,
John A. Smolin,
Jerry M. Chow,
Colm A. Ryan,
Chad Rigetti,
S. Poletto,
Thomas A. Ohki,
Mark B. Ketchen,
M. Steffen
Abstract:
The control and handling of errors arising from cross-talk and unwanted interactions in multi-qubit systems is an important issue in quantum information processing architectures. We introduce a benchmarking protocol that provides information about the amount of addressability present in the system and implement it on coupled superconducting qubits. The protocol consists of randomized benchmarking…
▽ More
The control and handling of errors arising from cross-talk and unwanted interactions in multi-qubit systems is an important issue in quantum information processing architectures. We introduce a benchmarking protocol that provides information about the amount of addressability present in the system and implement it on coupled superconducting qubits. The protocol consists of randomized benchmarking each qubit individually and then simultaneously, and the amount of addressability is related to the difference of the average gate fidelities of those experiments. We present the results on two similar samples with different amounts of cross-talk and unwanted interactions, which agree with predictions based on simple models for the amount of residual coupling.
△ Less
Submitted 2 January, 2013; v1 submitted 27 April, 2012;
originally announced April 2012.
-
Superconducting qubit in waveguide cavity with coherence time approaching 0.1ms
Authors:
Chad Rigetti,
Stefano Poletto,
Jay M. Gambetta,
B. L. T. Plourde,
Jerry M. Chow,
A. D. Corcoles,
John A. Smolin,
Seth T. Merkel,
J. R. Rozen,
George A. Keefe,
Mary B. Rothwell,
Mark B. Ketchen,
M. Steffen
Abstract:
We report a superconducting artificial atom with an observed quantum coherence time of T2*=95us and energy relaxation time T1=70us. The system consists of a single Josephson junction transmon qubit embedded in an otherwise empty copper waveguide cavity whose lowest eigenmode is dispersively coupled to the qubit transition. We attribute the factor of four increase in the coherence quality factor re…
▽ More
We report a superconducting artificial atom with an observed quantum coherence time of T2*=95us and energy relaxation time T1=70us. The system consists of a single Josephson junction transmon qubit embedded in an otherwise empty copper waveguide cavity whose lowest eigenmode is dispersively coupled to the qubit transition. We attribute the factor of four increase in the coherence quality factor relative to previous reports to device modifications aimed at reducing qubit dephasing from residual cavity photons. This simple device holds great promise as a robust and easily produced artificial quantum system whose intrinsic coherence properties are sufficient to allow tests of quantum error correction.
△ Less
Submitted 24 February, 2012;
originally announced February 2012.
-
Complete universal quantum gate set approaching fault-tolerant thresholds with superconducting qubits
Authors:
Jerry M. Chow,
Jay M. Gambetta,
A. D. Corcoles,
Seth T. Merkel,
John A. Smolin,
Chad Rigetti,
S. Poletto,
George A. Keefe,
Mary B. Rothwell,
J. R. Rozen,
Mark B. Ketchen,
M. Steffen
Abstract:
We use quantum process tomography to characterize a full universal set of all-microwave gates on two superconducting single-frequency single-junction transmon qubits. All extracted gate fidelities, including those for Clifford group generators, single-qubit pi/4 and pi/8 rotations, and a two-qubit controlled-NOT, exceed 95% (98%), without (with) accounting for state preparation and measurement err…
▽ More
We use quantum process tomography to characterize a full universal set of all-microwave gates on two superconducting single-frequency single-junction transmon qubits. All extracted gate fidelities, including those for Clifford group generators, single-qubit pi/4 and pi/8 rotations, and a two-qubit controlled-NOT, exceed 95% (98%), without (with) accounting for state preparation and measurement errors. Furthermore, we introduce a process map representation in the Pauli basis which is visually efficient and informative. This high-fidelity gate set serves as another critical building block towards scalable architectures of superconducting qubits for error correction schemes.
△ Less
Submitted 23 February, 2012;
originally announced February 2012.
-
Protecting superconducting qubits from external sources of loss and heat
Authors:
Antonio D. Córcoles,
Jerry M. Chow,
Jay M. Gambetta,
Chad Rigetti,
J. R. Rozen,
George A. Keefe,
Mary Beth Rothwell,
Mark B. Ketchen,
M. Steffen
Abstract:
We characterize a superconducting qubit before and after embedding it along with its package in an absorptive medium. We observe a drastic improvement in the effective qubit temperature and over a tenfold improvement in the relaxation time up to 5.7 $μ$s. Our results suggest the presence of external radiation inside the cryogenic apparatus can be a limiting factor for both qubit initialization and…
▽ More
We characterize a superconducting qubit before and after embedding it along with its package in an absorptive medium. We observe a drastic improvement in the effective qubit temperature and over a tenfold improvement in the relaxation time up to 5.7 $μ$s. Our results suggest the presence of external radiation inside the cryogenic apparatus can be a limiting factor for both qubit initialization and coherence. We infer from simple calculations that relaxation is not limited by thermal photons in the sample prior to embedding, but by dissipation arising from quasiparticle generation.
△ Less
Submitted 5 August, 2011;
originally announced August 2011.
-
A simple all-microwave entangling gate for fixed-frequency superconducting qubits
Authors:
Jerry M. Chow,
A. D. Corcoles,
Jay M. Gambetta,
Chad Rigetti,
B. R. Johnson,
John A. Smolin,
J. R. Rozen,
George A. Keefe,
Mary B. Rothwell,
Mark B. Ketchen,
M. Steffen
Abstract:
We demonstrate an all-microwave two-qubit gate on superconducting qubits which are fixed in frequency at optimal bias points. The gate requires no additional subcircuitry and is tunable via the amplitude of microwave irradiation on one qubit at the transition frequency of the other. We use the gate to generate entangled states with a maximal extracted concurrence of 0.88 and quantum process tomogr…
▽ More
We demonstrate an all-microwave two-qubit gate on superconducting qubits which are fixed in frequency at optimal bias points. The gate requires no additional subcircuitry and is tunable via the amplitude of microwave irradiation on one qubit at the transition frequency of the other. We use the gate to generate entangled states with a maximal extracted concurrence of 0.88 and quantum process tomography reveals a gate fidelity of 81%.
△ Less
Submitted 2 June, 2011;
originally announced June 2011.
