-
Room-temperature quantum optomechanics using an ultra-low noise cavity
Authors:
Guanhao Huang,
Alberto Beccari,
Nils J. Engelsen,
Tobias J. Kippenberg
Abstract:
Ponderomotive squeezing of light, where a mechanical oscillator creates quantum correlations between the phase and amplitude of the interacting light field, is a canonical signature of the quantum regime of optomechanics. At room temperature, this has only been reached in pioneering experiments where an optical restoring force controls the oscillator stiffness, akin to the vibrational motion of at…
▽ More
Ponderomotive squeezing of light, where a mechanical oscillator creates quantum correlations between the phase and amplitude of the interacting light field, is a canonical signature of the quantum regime of optomechanics. At room temperature, this has only been reached in pioneering experiments where an optical restoring force controls the oscillator stiffness, akin to the vibrational motion of atoms in an optical lattice. These include both levitated nanoparticles and optically-trapped cantilevers. Recent advances in engineered mechanical resonators, where the restoring force is provided by material rigidity rather than an external optical potential, have realized ultra-high quality factors (Q) by exploiting `soft clam**'. However entering the quantum regime with such resonators, has so far been prevented by optical cavity frequency fluctuations and thermal intermodulation noise. Here, we overcome this challenge and demonstrate optomechanical squeezing at room temperature in a phononic-engineered membrane-in-the-middle system. By using a high finesse cavity whose mirrors are patterned with phononic crystal structures, we reduce cavity frequency noise by more than 700-fold. In this ultra-low noise cavity, we introduce a silicon nitride membrane oscillator whose density is modulated by silicon nano-pillars, yielding both high thermal conductance and a localized mechanical mode with Q of 1.8e8. These advances enable operation within a factor of 2.5 of the Heisenberg limit, leading to squeezing of the probing field by 1.09 dB below the vacuum fluctuations. Moreover, the long thermal decoherence time of the membrane oscillator (more than 30 vibrational periods) allows us to obtain conditional displaced thermal states of motion with an occupation of 0.97 phonon, using a multimode Kalman filter. Our work extends quantum control of engineered macroscopic oscillators to room temperature.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
Nanomechanical resonators with ultra-high-$Q$ perimeter modes
Authors:
Mohammad. J. Bereyhi,
Amirali Arabmoheghi,
Sergey A. Fedorov,
Alberto Beccari,
Guanhao Huang,
Tobias J. Kippenberg,
Nils J. Engelsen
Abstract:
Systems with low mechanical dissipation are extensively used in precision measurements such as gravitational wave detection, atomic force microscopy and quantum control of mechanical oscillators via opto- and electromechanics. The mechanical quality factor ($Q$) of these systems determines the thermomechanical force noise and the thermal decoherence rate of mechanical quantum states. While the dis…
▽ More
Systems with low mechanical dissipation are extensively used in precision measurements such as gravitational wave detection, atomic force microscopy and quantum control of mechanical oscillators via opto- and electromechanics. The mechanical quality factor ($Q$) of these systems determines the thermomechanical force noise and the thermal decoherence rate of mechanical quantum states. While the dissipation rate is typically set by the bulk acoustic properties of the material, by exploiting dissipation dilution, mechanical $Q$ can be engineered through geometry and increased by many orders of magnitude. Recently, soft clam** in combination with strain engineering has enabled room temperature quality factors approaching one billion ($10^9$) in millimeter-scale resonators. Here we demonstrate a new approach to soft clam** which exploits vibrations in the perimeter of polygon-shaped resonators tethered at their vertices. In contrast to previous approaches, which rely on cascaded elements to achieve soft clam**, perimeter modes are soft clamped due to symmetry and the boundary conditions at the polygon vertices. Perimeter modes reach $Q$ of 3.6 billion at room temperature while spanning only two acoustic wavelengths -- a 4-fold improvement over the state-of-the-art mechanical $Q$ with 10-fold smaller devices. The small size of our devices makes them well-suited for near-field integration with microcavities for quantum optomechanical experiments. Moreover, their compactness allows the realization of phononic lattices. We demonstrate a one-dimensional Su-Schrieffer-Heeger chain of high-$Q$ perimeter modes coupled via nearest-neighbour interaction and characterize the localized edge modes.
△ Less
Submitted 6 December, 2021; v1 submitted 8 August, 2021;
originally announced August 2021.
-
Strained crystalline nanomechanical resonators with ultralow dissipation
Authors:
Alberto Beccari,
Diego A. Visani,
Sergey A. Fedorov,
Mohammad J. Bereyhi,
Victor Boureau,
Nils J. Engelsen,
Tobias J. Kippenberg
Abstract:
In strained mechanical resonators, the concurrence of tensile stress and geometric nonlinearity dramatically reduces dissipation. This phenomenon, dissipation dilution, is employed in mirror suspensions of gravitational wave interferometers and at the nanoscale, where soft-clam** and strain engineering have allowed extremely high quality factors. However, these techniques have so far only been a…
▽ More
In strained mechanical resonators, the concurrence of tensile stress and geometric nonlinearity dramatically reduces dissipation. This phenomenon, dissipation dilution, is employed in mirror suspensions of gravitational wave interferometers and at the nanoscale, where soft-clam** and strain engineering have allowed extremely high quality factors. However, these techniques have so far only been applied in amorphous materials, specifically silicon nitride. Crystalline materials exhibit significantly lower intrinsic dam** at cryogenic temperatures, due to the absence of two level systems in the bulk, as exploited in Weber bars and silicon optomechanical cavities. Applying dissipation dilution engineering to strained crystalline materials could therefore enable extremely low loss nanomechanical resonators, due to the combination of reduced internal friction, high intrinsic strain, and high yield strength. Pioneering work has not yet fully exploited this potential. Here, we demonstrate that single crystal strained silicon, a material developed for high mobility transistors, can be used to realize mechanical resonators with ultralow dissipation. We observe that high aspect ratio ($>10^5$) strained silicon nanostrings support MHz mechanical modes with quality factors exceeding $10^{10}$ at 7 K, a tenfold improvement over values reported in silicon nitride. At 7 K, the thermal noise-limited force sensitivity is approximately $45\ \mathrm{{zN}/{\sqrt{Hz}}}$ - approaching that of carbon nanotubes - and the heating rate is only 60 quanta-per-second. Our nanomechanical resonators exhibit lower dissipation than the most pristine macroscopic oscillators and their low mass makes them particularly promising for quantum sensing and transduction.
△ Less
Submitted 5 July, 2021;
originally announced July 2021.
-
Microwave-to-optical conversion with a gallium phosphide photonic crystal cavity
Authors:
Simon Hönl,
Youri Popoff,
Daniele Caimi,
Alberto Beccari,
Tobias J. Kippenberg,
Paul Seidler
Abstract:
Electrically actuated optomechanical resonators provide a route to quantum-coherent, bidirectional conversion of microwave and optical photons. Such devices could enable optical interconnection of quantum computers based on qubits operating at microwave frequencies. Here we present a novel platform for microwave-to-optical conversion comprising a photonic crystal cavity made of single-crystal, pie…
▽ More
Electrically actuated optomechanical resonators provide a route to quantum-coherent, bidirectional conversion of microwave and optical photons. Such devices could enable optical interconnection of quantum computers based on qubits operating at microwave frequencies. Here we present a novel platform for microwave-to-optical conversion comprising a photonic crystal cavity made of single-crystal, piezoelectric gallium phosphide integrated on pre-fabricated niobium circuits on an intrinsic silicon substrate. The devices exploit spatially extended, sideband-resolved mechanical breathing modes at $\sim$ 3.2 GHz, with vacuum optomechanical coupling rates of up to $g_0/2π\approx$ 300 kHz. The mechanical modes are driven by integrated microwave electrodes via the inverse piezoelectric effect. We estimate that the system could achieve an electromechanical coupling rate to a superconducting transmon qubit of $\sim$ 200 kHz. Our work represents a decisive step towards integration of piezoelectro-optomechanical interfaces with superconducting quantum processors.
△ Less
Submitted 27 May, 2021;
originally announced May 2021.
-
Hierarchical tensile structures with ultralow mechanical dissipation
Authors:
Mohammad J. Bereyhi,
Alberto Beccari,
Robin Groth,
Sergey A. Fedorov,
Amirali Arabmoheghi,
Tobias J. Kippenberg,
Nils J. Engelsen
Abstract:
Structural hierarchy is found in myriad biological systems and has improved man-made structures ranging from the Eiffel tower to optical cavities. Hierarchical metamaterials utilize structure at multiple size scales to realize new and highly desirable properties which can be strikingly different from those of the constituent materials. In mechanical resonators whose rigidity is provided by static…
▽ More
Structural hierarchy is found in myriad biological systems and has improved man-made structures ranging from the Eiffel tower to optical cavities. Hierarchical metamaterials utilize structure at multiple size scales to realize new and highly desirable properties which can be strikingly different from those of the constituent materials. In mechanical resonators whose rigidity is provided by static tension, structural hierarchy can reduce the dissipation of the fundamental mode to ultralow levels due to an unconventional form of soft clam**. Here, we apply hierarchical design to silicon nitride nanomechanical resonators and realize binary tree-shaped resonators with quality factors as high as $10^9$ at 107 kHz frequency, reaching the parameter regime of levitated particles. The resonators' thermal-noise-limited force sensitivities reach $740\ \mathrm{zN/\sqrt{Hz}}$ at room temperature and $\mathrm{90\ zN/\sqrt{Hz}}$ at 6 K, surpassing state-of-the-art cantilevers currently used for force microscopy. We also find that the self-similar structure of binary tree resonators results in fractional spectral dimensions, which is characteristic of fractal geometries. Moreover, we show that the hierarchical design principles can be extended to 2D trampoline membranes, and we fabricate ultralow dissipation membranes suitable for interferometric position measurements in Fabry-Pérot cavities. Hierarchical nanomechanical resonators open new avenues in force sensing, signal transduction and quantum optomechanics, where low dissipation is paramount and operation with the fundamental mode is often advantageous.
△ Less
Submitted 28 January, 2022; v1 submitted 17 March, 2021;
originally announced March 2021.
-
Thermal intermodulation noise in cavity-based measurements
Authors:
Sergey A. Fedorov,
Alberto Beccari,
Amirali Arabmoheghi,
Dalziel J. Wilson,
Nils J. Engelsen,
Tobias J. Kippenberg
Abstract:
Thermal frequency fluctuations in optical cavities limit the sensitivity of precision experiments ranging from gravitational wave observatories to optical atomic clocks. Conventional modeling of these noises assumes a linear response of the optical field to the fluctuations of cavity frequency. Fundamentally, however, this response is nonlinear. Here we show that nonlinearly transduced thermal flu…
▽ More
Thermal frequency fluctuations in optical cavities limit the sensitivity of precision experiments ranging from gravitational wave observatories to optical atomic clocks. Conventional modeling of these noises assumes a linear response of the optical field to the fluctuations of cavity frequency. Fundamentally, however, this response is nonlinear. Here we show that nonlinearly transduced thermal fluctuations of cavity frequency can dominate the broadband noise in photodetection, even when the magnitude of fluctuations is much smaller than the cavity linewidth. We term this noise "thermal intermodulation noise" and show that for a resonant laser probe it manifests as intensity fluctuations. We report and characterize thermal intermodulation noise in an optomechanical cavity, where the frequency fluctuations are caused by mechanical Brownian motion, and find excellent agreement with our developed theoretical model. We demonstrate that the effect is particularly relevant to quantum optomechanics: using a phononic crystal $Si_3N_4$ membrane with a low mass, soft-clamped mechanical mode we are able to operate in the regime where measurement quantum backaction contributes as much force noise as the thermal environment does. However, in the presence of intermodulation noise, quantum signatures of measurement are not revealed in direct photodetectors. The reported noise mechanism, while studied for an optomechanical system, can exist in any optical cavity.
△ Less
Submitted 14 May, 2020; v1 submitted 12 April, 2020;
originally announced April 2020.
