Showing 1–15 of 15 results for author: Barker, D

LIGO operates with quantum noise below the Standard Quantum Limit

Authors: Wenxuan Jia, Victoria Xu, Kevin Kuns, Masayuki Nakano, Lisa Barsotti, Matthew Evans, Nergis Mavalvala, Rich Abbott, Ibrahim Abouelfettouh, Rana Adhikari, Alena Ananyeva, Stephen Appert, Koji Arai, Naoki Aritomi, Stuart Aston, Matthew Ball, Stefan Ballmer, David Barker, Beverly Berger, Joseph Betzwieser, Dripta Bhattacharjee, Garilynn Billingsley, Nina Bode, Edgard Bonilla, Vladimir Bossilkov , et al. (146 additional authors not shown)

Abstract: Precision measurements of space and time, like those made by the detectors of the Laser Interferometer Gravitational-wave Observatory (LIGO), are often confronted with fundamental limitations imposed by quantum mechanics. The Heisenberg uncertainty principle dictates that the position and momentum of an object cannot both be precisely measured, giving rise to an apparent limitation called the Stan… ▽ More Precision measurements of space and time, like those made by the detectors of the Laser Interferometer Gravitational-wave Observatory (LIGO), are often confronted with fundamental limitations imposed by quantum mechanics. The Heisenberg uncertainty principle dictates that the position and momentum of an object cannot both be precisely measured, giving rise to an apparent limitation called the Standard Quantum Limit (SQL). Reducing quantum noise below the SQL in gravitational-wave detectors, where photons are used to continuously measure the positions of freely falling mirrors, has been an active area of research for decades. Here we show how the LIGO A+ upgrade reduced the detectors' quantum noise below the SQL by up to 3 dB while achieving a broadband sensitivity improvement, more than two decades after this possibility was first presented. △ Less

Submitted 22 April, 2024; originally announced April 2024.

Report number: LIGO-P2400059

Continuous microwave photon counting by semiconductor-superconductor hybrids

Authors: Subhomoy Haldar, David Barker, Harald Havir, Antti Ranni, Sebastian Lehmann, Kimberly A. Dick, Ville F. Maisi

Abstract: The growing interest in quantum information has enabled the manipulation and readout of microwave photon states with high fidelities. The presently available microwave photon counters, based on superconducting circuits, are limited to non-continuous pulsed mode operation, requiring additional steps for qubit state preparation before an actual measurement. Here, we present a continuous microwave ph… ▽ More The growing interest in quantum information has enabled the manipulation and readout of microwave photon states with high fidelities. The presently available microwave photon counters, based on superconducting circuits, are limited to non-continuous pulsed mode operation, requiring additional steps for qubit state preparation before an actual measurement. Here, we present a continuous microwave photon counter based on superconducting cavity-coupled semiconductor quantum dots. The device utilizes photon-assisted tunneling in a double quantum dot with tunneling events being probed by a third dot. Our device detects both single and multiple-photon absorption events independently, thanks to the energy tunability of a two-level double-dot absorber. We show that the photon-assisted tunnel rates serve as the measure of the cavity photon state in line with the P(E) theory - a theoretical framework delineating the mediation of the cavity photon field via a two-level environment. We further describe the single photon detection using the Jaynes-Cummings input-output theory and show that it agrees with the P(E) theory predictions. △ Less

Submitted 12 January, 2024; originally announced January 2024.

Comments: 8 pages, 3 figures

Grating magneto-optical traps with complicated level structures

Authors: D. S. Barker, P. K. Elgee, A. Sitaram, E. B. Norrgard, N. N. Klimov, G. K. Campbell, S. Eckel

Abstract: We study the forces and optical pum** within grating magneto-optical traps (MOTs) operating on transitions with non-trivial level structure. In contrast to the standard six-beam MOT configuration, rate equation modelling predicts that the asymmetric laser geometry of a grating MOT will produce spin-polarized atomic samples. Furthermore, the Landé $g$-factors and total angular momenta of the trap… ▽ More We study the forces and optical pum** within grating magneto-optical traps (MOTs) operating on transitions with non-trivial level structure. In contrast to the standard six-beam MOT configuration, rate equation modelling predicts that the asymmetric laser geometry of a grating MOT will produce spin-polarized atomic samples. Furthermore, the Landé $g$-factors and total angular momenta of the trap** transition strongly influence both the confinement and equilibrium position of the trap. Using the intuition gained from the rate equation model, we realize a grating MOT of fermionic $^{87}$Sr and observe that it forms closer to the center of the trap's quadrupole magnetic field than its bosonic counterpart. We also explore the application of grating MOTs to molecule laser cooling, where the rate equations suggest that dual-frequency operation is necessary, but not sufficient, for stable confinement for type-II level structures. To test our molecule laser cooling models, we create grating MOTs using the $D_1$ line of $^7$Li and see that only two of the four possible six-beam polarization configurations operate in the grating geometry. Our results will aid the development of portable atom and molecule traps for time kee**, inertial navigation, and precision measurement. △ Less

Submitted 7 September, 2023; v1 submitted 12 May, 2023; originally announced May 2023.

Comments: 33 pages, 18 figures

Collision-resolved pressure sensing

Authors: Daniel S. Barker, Daniel Carney, Thomas W. LeBrun, David C. Moore, Jacob M. Taylor

Abstract: Heat and pressure are ultimately transmitted via quantized degrees of freedom, like gas particles and phonons. While a continuous Brownian description of these noise sources is adequate to model measurements with relatively long integration times, sufficiently precise measurements can resolve the detailed time dependence coming from individual bath-system interactions. We propose the use of nanome… ▽ More Heat and pressure are ultimately transmitted via quantized degrees of freedom, like gas particles and phonons. While a continuous Brownian description of these noise sources is adequate to model measurements with relatively long integration times, sufficiently precise measurements can resolve the detailed time dependence coming from individual bath-system interactions. We propose the use of nanomechanical devices operated with impulse readout sensitivity around the ``standard quantum limit'' to sense ultra-low gas pressures by directly counting the individual collisions of gas particles on a sensor. We illustrate this in two paradigmatic model systems: an optically levitated nanobead and a tethered membrane system in a phononic bandgap shield. △ Less

Submitted 17 March, 2023; originally announced March 2023.

Comments: 4 pages + short appendix, 3 figs

Minimally dissipative information erasure in a quantum dot via thermodynamic length

Authors: Matteo Scandi, David Barker, Sebastian Lehmann, Kimberly A. Dick, Ville F. Maisi, Martí Perarnau-Llobet

Abstract: In this work we explore the use of thermodynamic length to improve the performance of experimental protocols. In particular, we implement Landauer erasure on a driven electron level in a semiconductor quantum dot, and compare the standard protocol in which the energy is increased linearly in time with the one coming from geometric optimisation. The latter is obtained by choosing a suitable metric… ▽ More In this work we explore the use of thermodynamic length to improve the performance of experimental protocols. In particular, we implement Landauer erasure on a driven electron level in a semiconductor quantum dot, and compare the standard protocol in which the energy is increased linearly in time with the one coming from geometric optimisation. The latter is obtained by choosing a suitable metric structure, whose geodesics correspond to optimal finite-time thermodynamic protocols in the slow driving regime. We show experimentally that geodesic drivings minimise dissipation for slow protocols, with a bigger improvement as one approaches perfect erasure. Moreover, the geometric approach also leads to smaller dissipation even when the time of the protocol becomes comparable with the equilibration timescale of the system, i.e., away from the slow driving regime. Our results also illustrate, in a single-electron device, a fundamental principle of thermodynamic geometry: optimal finite-time thermodynamic protocols are those with constant dissipation rate along the process. △ Less

Submitted 10 January, 2023; v1 submitted 5 September, 2022; originally announced September 2022.

$Λ$-enhanced gray molasses in a tetrahedral laser beam geometry

Authors: D. S. Barker, E. B. Norrgard, N. N. Klimov, J. A. Fedchak, J. Scherschligt, S. Eckel

Abstract: We report observation of sub-Doppler cooling of lithium using an irregular-tetrahedral laser beam arrangement, which is produced by a nanofabricated diffraction grating. We are able to capture 11(2) % of the lithium atoms from a grating magneto-optical trap into $Λ$-enhanced $D_1$ gray molasses. The molasses cools the captured atoms to a radial temperature of 60(9) $μ$K and an axial temperature of… ▽ More We report observation of sub-Doppler cooling of lithium using an irregular-tetrahedral laser beam arrangement, which is produced by a nanofabricated diffraction grating. We are able to capture 11(2) % of the lithium atoms from a grating magneto-optical trap into $Λ$-enhanced $D_1$ gray molasses. The molasses cools the captured atoms to a radial temperature of 60(9) $μ$K and an axial temperature of 23(3) $μ$K. In contrast to results from conventional counterpropagating beam configurations, we do not observe cooling when our optical fields are detuned from Raman resonance. An optical Bloch equation simulation of the cooling dynamics agrees with our data. Our results show that grating magneto-optical traps can serve as a robust source of cold atoms for tweezer-array and atom-chip experiments, even when the atomic species is not amenable to sub-Doppler cooling in bright optical molasses. △ Less

Submitted 6 October, 2021; originally announced October 2021.

Comments: 12 pages, 5 figures

Experimental verification of the work fluctuation-dissipation relation for information-to-work conversion

Authors: David Barker, Matteo Scandi, Sebastian Lehmann, Claes Thelander, Kimberly A. Dick, Martí Perarnau-Llobet, Ville F. Maisi

Abstract: We study experimentally work fluctuations in a Szilard engine that extracts work from information encoded as the occupancy of an electron level in a semiconductor quantum dot. We show that as the average work extracted per bit of information increases towards the Landauer limit $k_BT \ln 2$, the work fluctuations decrease in accordance with the work fluctuation-dissipation relation. We compare the… ▽ More We study experimentally work fluctuations in a Szilard engine that extracts work from information encoded as the occupancy of an electron level in a semiconductor quantum dot. We show that as the average work extracted per bit of information increases towards the Landauer limit $k_BT \ln 2$, the work fluctuations decrease in accordance with the work fluctuation-dissipation relation. We compare the results to a protocol without measurement and feedback and show that when no information is used, the work output and fluctuations vanish simultaneously contrasting the information-to-energy conversion case where increasing amount of work is produced with decreasing fluctuations. Our work highlights the importance of fluctuations in the design of information-to-work conversion processes. △ Less

Submitted 8 September, 2021; v1 submitted 7 September, 2021; originally announced September 2021.

Comments: 8 pages, 4 figures, appendix

LIGOs Quantum Response to Squeezed States

Authors: L. McCuller, S. E. Dwyer, A. C. Green, Haocun Yu, L. Barsotti, C. D. Blair, D. D. Brown, A. Effler, M. Evans, A. Fernandez-Galiana, P. Fritschel, V. V. Frolov, N. Kijbunchoo, G. L. Mansell, F. Matichard, N. Mavalvala, D. E. McClelland, T. McRae, A. Mullavey, D. Sigg, B. J. J. Slagmolen, M. Tse, T. Vo, R. L. Ward, C. Whittle , et al. (172 additional authors not shown)

Abstract: Gravitational Wave interferometers achieve their profound sensitivity by combining a Michelson interferometer with optical cavities, suspended masses, and now, squeezed quantum states of light. These states modify the measurement process of the LIGO, VIRGO and GEO600 interferometers to reduce the quantum noise that masks astrophysical signals; thus, improvements to squeezing are essential to furth… ▽ More Gravitational Wave interferometers achieve their profound sensitivity by combining a Michelson interferometer with optical cavities, suspended masses, and now, squeezed quantum states of light. These states modify the measurement process of the LIGO, VIRGO and GEO600 interferometers to reduce the quantum noise that masks astrophysical signals; thus, improvements to squeezing are essential to further expand our gravitational view of the universe. Further reducing quantum noise will require both lowering decoherence from losses as well more sophisticated manipulations to counter the quantum back-action from radiation pressure. Both tasks require fully understanding the physical interactions between squeezed light and the many components of km-scale interferometers. To this end, data from both LIGO observatories in observing run three are expressed using frequency-dependent metrics to analyze each detector's quantum response to squeezed states. The response metrics are derived and used to concisely describe physical mechanisms behind squeezing's simultaneous interaction with transverse-mode selective optical cavities and the quantum radiation pressure noise of suspended mirrors. These metrics and related analysis are broadly applicable for cavity-enhanced optomechanics experiments that incorporate external squeezing, and -- for the first time -- give physical descriptions of every feature so far observed in the quantum noise of the LIGO detectors. △ Less

Submitted 25 May, 2021; originally announced May 2021.

Comments: 24 pages, 5 figures

Report number: P2100050

Journal ref: Phys. Rev. D 104, 062006 (2021)

Approaching the motional ground state of a 10 kg object

Authors: Chris Whittle, Evan D. Hall, Sheila Dwyer, Nergis Mavalvala, Vivishek Sudhir, R. Abbott, A. Ananyeva, C. Austin, L. Barsotti, J. Betzwieser, C. D. Blair, A. F. Brooks, D. D. Brown, A. Buikema, C. Cahillane, J. C. Driggers, A. Effler, A. Fernandez-Galiana, P. Fritschel, V. V. Frolov, T. Hardwick, M. Kasprzack, K. Kawabe, N. Kijbunchoo, J. S. Kissel , et al. (175 additional authors not shown)

Abstract: The motion of a mechanical object -- even a human-sized object -- should be governed by the rules of quantum mechanics. Coaxing them into a quantum state is, however, difficult: the thermal environment masks any quantum signature of the object's motion. Indeed, the thermal environment also masks effects of proposed modifications of quantum mechanics at large mass scales. We prepare the center-of-m… ▽ More The motion of a mechanical object -- even a human-sized object -- should be governed by the rules of quantum mechanics. Coaxing them into a quantum state is, however, difficult: the thermal environment masks any quantum signature of the object's motion. Indeed, the thermal environment also masks effects of proposed modifications of quantum mechanics at large mass scales. We prepare the center-of-mass motion of a 10 kg mechanical oscillator in a state with an average phonon occupation of 10.8. The reduction in temperature, from room temperature to 77 nK, is commensurate with an 11 orders-of-magnitude suppression of quantum back-action by feedback -- and a 13 orders-of-magnitude increase in the mass of an object prepared close to its motional ground state. This begets the possibility of probing gravity on massive quantum systems. △ Less

Submitted 9 July, 2021; v1 submitted 24 February, 2021; originally announced February 2021.

Comments: published version containing minor changes

Report number: LIGO-P2000525

Journal ref: Science 372, 1333 (2021)

PyLCP: A python package for computing laser cooling physics

Authors: S. Eckel, D. S. Barker, E. B. Norrgard, J. Scherschligt

Abstract: We present a python object-oriented computer program for simulating various aspects of laser cooling physics. Our software is designed to be both easy to use and adaptable, allowing the user to specify the level structure, magnetic field profile, or the laser beams' geometry, detuning, and intensity. The program contains three levels of approximation for the motion of the atom, applicable in diffe… ▽ More We present a python object-oriented computer program for simulating various aspects of laser cooling physics. Our software is designed to be both easy to use and adaptable, allowing the user to specify the level structure, magnetic field profile, or the laser beams' geometry, detuning, and intensity. The program contains three levels of approximation for the motion of the atom, applicable in different regimes offering cross checks for calculations and computational efficiency depending on the physical situation. We test the software by reproducing well-known phenomena, such as damped Rabi flop**, electromagnetically induced transparency, stimulated Raman adiabatic passage, and optical molasses. We also use our software package to quantitatively simulate recoil-limited magneto-optical traps, like those formed on the narrow $^1$S$_0\rightarrow ^3$P$_1$ transition in $^{88}$Sr and $^{87}$Sr. △ Less

Submitted 16 November, 2020; originally announced November 2020.

Comments: 12 pages, 12 figures

Outgassing rate comparison of seven geometrically similar vacuum chambers of different materials and heat treatments

Authors: James A. Fedchak, Julia K. Scherschligt, Sefer Avdiaj, Daniel S. Barker, Stephen P. Eckel, Ben Bowers, Scott OConnell, Perry Henderson

Abstract: We have measured the water and hydrogen outgassing rates of seven vacuum chambers of identical geometry but constructed of different materials and heat treatments. Chambers of five different materials were tested: 304L, 316L, and 316LN stainless steels; titanium (ASTM grade 2); and 6061 aluminum. In addition, chambers constructed of 316L and 316LN stainless steel were subjected to a vacuum-fire pr… ▽ More We have measured the water and hydrogen outgassing rates of seven vacuum chambers of identical geometry but constructed of different materials and heat treatments. Chambers of five different materials were tested: 304L, 316L, and 316LN stainless steels; titanium (ASTM grade 2); and 6061 aluminum. In addition, chambers constructed of 316L and 316LN stainless steel were subjected to a vacuum-fire process, where they were heated to approximately 950 °C for 24 hours while under vacuum; these two chambers are designated as 316L-XHV and 316LN-XHV. All chambers were of identical geometry and made by the same manufacturer, thus a relative comparison of the outgassing rates among these chambers can be made. Water outgassing rates were measured as a function of time using the throughput technique. The water outgassing results for the 316L, 316LN, 316L-XHV, 316LN-XHV were all similar, but lower than those of 304L by a factor of 3 to 5 lower at 10^4 s. The water outgassing results for Ti and Al chambers were close to that of 304L, Ti being slightly lower. Hydrogen outgassing rates were measured using the rate-of-rise method and performed after a low-temperature bake of 125 °C to 150 °C for a minimum of 72 hours. The Ti, Al, 316L-XHV, and 316LN-XHV chambers all have specific outgassing rates below 1 X 10^-11 Pa L s^-1 cm^-2 and are at least a factor of 100 or better than the 304L chamber. The 304L, 316L, and 316LN chambers without vacuum-fire heat treatment have larger hydrogen outgassing rates than the other chambers, with specific outgassing rates ranging between 4.0 X 10^-11 Pa L s^-1 cm^-2 and 8.0 X 10^-11 Pa L s^-1 cm^-2. We conclude that Ti, Al, 316L-XHV, and 316LN-XHV have hydrogen outgassing rates that make them excellent choices for ultra-high vacuum (UHV) and extreme-high vacuum (XHV) applications, the choice depending on cost and other material properties. △ Less

Submitted 9 March, 2021; v1 submitted 22 September, 2020; originally announced September 2020.

Comments: 27 pages, 8 figures, 4 tables The following article has been submitted the Journal of Vacuum Science & Technology B. This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Journal of Vacuum Science & Technology B 39, 024201 (2021) and may be found at https://doi.org/10.1116/6.0000657

Journal ref: Journal of Vacuum Science & Technology B 39, 024201 (2021)

A radiofrequency voltage-controlled current source for quantum spin manipulation

Authors: D. S. Barker, A. Restelli, J. A. Fedchak, J. Scherschligt, S. Eckel

Abstract: We present a design for a wide-bandwidth, voltage-controlled current source that is easily integrated with radiofrequency magnetic field coils. Our design uses current feedback to compensate for the frequency-dependent impedance of a radiofrequency antenna. We are able to deliver peak currents greater than 100 mA over a 300 kHz to 54 MHz frequency span. The radiofrequency current source fits onto… ▽ More We present a design for a wide-bandwidth, voltage-controlled current source that is easily integrated with radiofrequency magnetic field coils. Our design uses current feedback to compensate for the frequency-dependent impedance of a radiofrequency antenna. We are able to deliver peak currents greater than 100 mA over a 300 kHz to 54 MHz frequency span. The radiofrequency current source fits onto a printed circuit board smaller than $4~\text{cm}^2$ and consumes less than 1.3 W of power. It is suitable for use in deployable quantum sensors and nuclear-magnetic-resonance systems. △ Less

Submitted 15 October, 2020; v1 submitted 22 April, 2020; originally announced April 2020.

Comments: 8 pages, 3 figures, accepted version

Journal ref: Review of Scientific Instruments 91, 104708 (2020)

Quantum correlations between the light and kilogram-mass mirrors of LIGO

Authors: Haocun Yu, L. McCuller, M. Tse, L. Barsotti, N. Mavalvala, J. Betzwieser, C. D. Blair, S. E. Dwyer, A. Effler, M. Evans, A. Fernandez-Galiana, P. Fritschel, V. V. Frolov, N. Kijbunchoo, F. Matichard, D. E. McClelland, T. McRae, A. Mullavey, D. Sigg, B. J. J. Slagmolen, C. Whittle, A. Buikema, Y. Chen, T. R. Corbitt, R. Schnabel , et al. (174 additional authors not shown)

Abstract: Measurement of minuscule forces and displacements with ever greater precision encounters a limit imposed by a pillar of quantum mechanics: the Heisenberg uncertainty principle. A limit to the precision with which the position of an object can be measured continuously is known as the standard quantum limit (SQL). When light is used as the probe, the SQL arises from the balance between the uncertain… ▽ More Measurement of minuscule forces and displacements with ever greater precision encounters a limit imposed by a pillar of quantum mechanics: the Heisenberg uncertainty principle. A limit to the precision with which the position of an object can be measured continuously is known as the standard quantum limit (SQL). When light is used as the probe, the SQL arises from the balance between the uncertainties of photon radiation pressure imposed on the object and of the photon number in the photoelectric detection. The only possibility surpassing the SQL is via correlations within the position/momentum uncertainty of the object and the photon number/phase uncertainty of the light it reflects. Here, we experimentally prove the theoretical prediction that this type of quantum correlation is naturally produced in the Laser Interferometer Gravitational-wave Observatory (LIGO). Our measurements show that the quantum mechanical uncertainties in the phases of the 200 kW laser beams and in the positions of the 40 kg mirrors of the Advanced LIGO detectors yield a joint quantum uncertainty a factor of 1.4 (3dB) below the SQL. We anticipate that quantum correlations will not only improve gravitational wave (GW) observatories but all types of measurements in future. △ Less

Submitted 4 February, 2020; originally announced February 2020.

A flexible, open-source radio-frequency driver for acousto-optic and electro-optic devices

Authors: D. S. Barker, N. C. Pisenti, A. Restelli, J. Scherschligt, J. A. Fedchak, G. K. Campbell, S. Eckel

Abstract: We present a design for a radio-frequency driver that leverages telecom amplifiers to achieve high power output and wide bandwidth. The design consists of two compact printed circuit boards (total area $< 255$ cm), which incorporate power (turn-on) and thermal management to prevent accidental damage to the amplifier circuitry. Our driver provides $>1$ W of output power over a $10$ MHz to $1.1$ GHz… ▽ More We present a design for a radio-frequency driver that leverages telecom amplifiers to achieve high power output and wide bandwidth. The design consists of two compact printed circuit boards (total area $< 255$ cm), which incorporate power (turn-on) and thermal management to prevent accidental damage to the amplifier circuitry. Our driver provides $>1$ W of output power over a $10$ MHz to $1.1$ GHz frequency range, and $\geq 5$ W from $20$ MHz to $100$ MHz. The driver circuit includes auxiliary components for analog frequency and amplitude modulation ($\approx 70$ kHz bandwidth), as well as digital power switching ($> 30$ dB of extinction within $40$ ns and final extinction $> 90$ dB). The radio-frequency source can also be digitally switched between an external input and an integrated voltage-controlled oscillator. Our design is motivated by the need for flexible, inexpensive drivers of optically active devices, such as acousto-optic and electro-optic modulators. △ Less

Submitted 6 August, 2019; originally announced August 2019.

Comments: 8 pages, 7 figures

Quantum correlation measurements in interferometric gravitational wave detectors

Authors: D. V. Martynov, V. V. Frolov, S. Kandhasamy, K. Izumi, H. Miao, N. Mavalvala, E. D. Hall, R. Lanza, B. P. Abbott, R. Abbott, T. D. Abbott, C. Adams, R. X. Adhikari, S. B. Anderson, A. Ananyeva, S. Appert, K. Arai, S. M. Aston, S. W. Ballmer, D. Barker, B. Barr, L. Barsotti, J. Bartlett, I. Bartos, J. C. Batch , et al. (177 additional authors not shown)

Abstract: Quantum fluctuations in the phase and amplitude quadratures of light set limitations on the sensitivity of modern optical instruments. The sensitivity of the interferometric gravitational wave detectors, such as the Advanced Laser Interferometer Gravitational wave Observatory (LIGO), is limited by quantum shot noise, quantum radiation pressure noise, and a set of classical noises. We show how the… ▽ More Quantum fluctuations in the phase and amplitude quadratures of light set limitations on the sensitivity of modern optical instruments. The sensitivity of the interferometric gravitational wave detectors, such as the Advanced Laser Interferometer Gravitational wave Observatory (LIGO), is limited by quantum shot noise, quantum radiation pressure noise, and a set of classical noises. We show how the quantum properties of light can be used to distinguish these noises using correlation techniques. Particularly, in the first part of the paper we show estimations of the coating thermal noise and gas phase noise, hidden below the quantum shot noise in the Advanced LIGO sensitivity curve. We also make projections on the observatory sensitivity during the next science runs. In the second part of the paper we discuss the correlation technique that reveals the quantum radiation pressure noise from the background of classical noises and shot noise. We apply this technique to the Advanced LIGO data, collected during the first science run, and experimentally estimate the quantum correlations and quantum radiation pressure noise in the interferometer for the first time. △ Less

Submitted 10 February, 2017; originally announced February 2017.

Journal ref: Phys. Rev. A 95, 043831 (2017)