-
Monitoring the energy of a cavity by observing the emission of a repeatedly excited qubit
Authors:
Hector Hutin,
Antoine Essig,
Réouven Assouly,
Pierre Rouchon,
Audrey Bienfait,
Benjamin Huard
Abstract:
The number of excitations in a large quantum system (harmonic oscillator or qudit) can be measured in a quantum non demolition manner using a dispersively coupled qubit. It typically requires a series of qubit pulses that encode various binary questions about the photon number. Recently, a method based on the fluorescence measurement of a qubit driven by a train of identical pulses was introduced…
▽ More
The number of excitations in a large quantum system (harmonic oscillator or qudit) can be measured in a quantum non demolition manner using a dispersively coupled qubit. It typically requires a series of qubit pulses that encode various binary questions about the photon number. Recently, a method based on the fluorescence measurement of a qubit driven by a train of identical pulses was introduced to track the photon number in a cavity, hence simplifying its monitoring and raising interesting questions about the measurement backaction of this scheme. A first realization with superconducting circuits demonstrated how the average number of photons could be measured in this way. Here we present an experiment that reaches single shot photocounting and number tracking owing to a cavity decay rate 4 orders of magnitude smaller than both the dispersive coupling rate and the qubit emission rate. An innovative notch filter and pogo-pin based galvanic contact makes possible these seemingly incompatible features. The qubit dynamics under the pulse train is characterized. We observe quantum jumps by monitoring the photon number via the qubit fluorescence as photons leave the cavity one at a time. Besides, we extract the measurement rate and induced dephasing rate and compare them to theoretical models. Our method could be applied to quantum error correction protocols on bosonic codes or qudits.
△ Less
Submitted 7 February, 2024;
originally announced February 2024.
-
Qplacer: Frequency-Aware Component Placement for Superconducting Quantum Computers
Authors:
Junyao Zhang,
Hanrui Wang,
Qi Ding,
Jiaqi Gu,
Reouven Assouly,
William D. Oliver,
Song Han,
Kenneth R. Brown,
Hai "Helen" Li,
Yiran Chen
Abstract:
Noisy Intermediate-Scale Quantum (NISQ) computers face a critical limitation in qubit numbers, hindering their progression towards large-scale and fault-tolerant quantum computing. A significant challenge impeding scaling is crosstalk, characterized by unwanted interactions among neighboring components on quantum chips, including qubits, resonators, and substrate. We motivate a general approach to…
▽ More
Noisy Intermediate-Scale Quantum (NISQ) computers face a critical limitation in qubit numbers, hindering their progression towards large-scale and fault-tolerant quantum computing. A significant challenge impeding scaling is crosstalk, characterized by unwanted interactions among neighboring components on quantum chips, including qubits, resonators, and substrate. We motivate a general approach to systematically resolving multifaceted crosstalks in a limited substrate area. We propose Qplacer, a frequency-aware electrostatic-based placement framework tailored for superconducting quantum computers, to alleviate crosstalk by isolating these components in spatial and frequency domains alongside compact substrate design. Qplacer commences with a frequency assigner that ensures frequency domain isolation for qubits and resonators. It then incorporates a padding strategy and resonator partitioning for layout flexibility. Central to our approach is the conceptualization of quantum components as charged particles, enabling strategic spatial isolation through a 'frequency repulsive force' concept. Our results demonstrate that Qplacer carefully crafts the physical component layout in mitigating various crosstalk impacts while maintaining a compact substrate size. On various device topologies and NISQ benchmarks, Qplacer improves fidelity by an average of 36.7x and reduces spatial violations (susceptible to crosstalk) by an average of 12.76x, compared to classical placement engines. Regarding area optimization, compared to manual designs, Qplacer can reduce the required layout area by 2.14x on average
△ Less
Submitted 8 May, 2024; v1 submitted 30 January, 2024;
originally announced January 2024.
-
Demonstration of Quantum Advantage in Microwave Quantum Radar
Authors:
Réouven Assouly,
Rémy Dassonneville,
Théau Peronnin,
Audrey Bienfait,
Benjamin Huard
Abstract:
While quantum entanglement can enhance the performance of several technologies such as computing, sensing and cryptography, its widespread use is hindered by its sensitivity to noise and losses. Interestingly, even when entanglement has been destroyed, some tasks still exhibit a quantum advantage $Q$, defined by a $Q$-time speedup, over any classical strategies. A prominent example is the quantum…
▽ More
While quantum entanglement can enhance the performance of several technologies such as computing, sensing and cryptography, its widespread use is hindered by its sensitivity to noise and losses. Interestingly, even when entanglement has been destroyed, some tasks still exhibit a quantum advantage $Q$, defined by a $Q$-time speedup, over any classical strategies. A prominent example is the quantum radar, which enhances the detection of the presence of a target in noisy surroundings. To beat all classical strategies, Lloyd proposed to use a probe initially entangled with an idler that can be recombined and measured with the reflected probe. Observing any quantum advantage requires exploiting the quantum correlations between the probe and the idler. It involves their joint measurement or at least adapting the idler detection to the outcome of the probe measurement. In addition to successful demonstrations of such quantum illumination protocols at optical frequencies, the proposal of a microwave radar, closer to conventional radars, gathered a lot of interest. However, previous microwave implementations have not demonstrated any quantum advantage as probe and idler were always measured independently. In this work, we implement a joint measurement using a superconducting circuit and demonstrate a quantum advantage $Q>1$ for microwave radar. Storing the idler mitigates the detrimental impact of microwave loss on the quantum advantage, and the purity of the initial entangled state emerges as the next limit. While the experiment is a proof-of-principle performed inside a dilution refrigerator, it exhibits some of the inherent difficulties in implementing quantum radars such as the limited range of parameters where a quantum advantage can be observed or the requirement for very low probe and idler temperatures.
△ Less
Submitted 2 March, 2023; v1 submitted 10 November, 2022;
originally announced November 2022.
-
Propagating Quantum Microwaves: Towards Applications in Communication and Sensing
Authors:
Mateo Casariego,
Emmanuel Zambrini Cruzeiro,
Stefano Gherardini,
Tasio Gonzalez-Raya,
Rui André,
Gonçalo Frazão,
Giacomo Catto,
Mikko Möttönen,
Debopam Datta,
Klaara Viisanen,
Joonas Govenius,
Mika Prunnila,
Kimmo Tuominen,
Maximilian Reichert,
Michael Renger,
Kirill G. Fedorov,
Frank Deppe,
Harriet van der Vliet,
A. J. Matthews,
Yolanda Fernández,
R. Assouly,
R. Dassonneville,
B. Huard,
Mikel Sanz,
Yasser Omar
Abstract:
The field of propagating quantum microwaves has started to receive considerable attention in the past few years. Motivated at first by the lack of an efficient microwave-to-optical platform that could solve the issue of secure communication between remote superconducting chips, current efforts are starting to reach other areas, from quantum communications to sensing. Here, we attempt at giving a s…
▽ More
The field of propagating quantum microwaves has started to receive considerable attention in the past few years. Motivated at first by the lack of an efficient microwave-to-optical platform that could solve the issue of secure communication between remote superconducting chips, current efforts are starting to reach other areas, from quantum communications to sensing. Here, we attempt at giving a state-of-the-art view of the two, pointing at some of the technical and theoretical challenges we need to address, and while providing some novel ideas and directions for future research. Hence, the goal of this paper is to provide a bigger picture, and -- we hope -- to inspire new ideas in quantum communications and sensing: from open-air microwave quantum key distribution to direct detection of dark matter, we expect that the recent efforts and results in quantum microwaves will soon attract a wider audience, not only in the academic community, but also in an industrial environment.
△ Less
Submitted 23 May, 2022;
originally announced May 2022.
-
Energetics of a Single Qubit Gate
Authors:
Jeremy Stevens,
Daniel Szombati,
Maria Maffei,
Cyril Elouard,
Réouven Assouly,
Nathanaël Cottet,
Rémy Dassonneville,
Quentin Ficheux,
Stefan Zeppetzauer,
Audrey Bienfait,
Andrew N. Jordan,
Alexia Auffèves,
Benjamin Huard
Abstract:
Qubits are physical, a quantum gate thus not only acts on the information carried by the qubit but also on its energy. What is then the corresponding flow of energy between the qubit and the controller that implements the gate? Here we exploit a superconducting platform to answer this question in the case of a quantum gate realized by a resonant drive field. During the gate, the superconducting qu…
▽ More
Qubits are physical, a quantum gate thus not only acts on the information carried by the qubit but also on its energy. What is then the corresponding flow of energy between the qubit and the controller that implements the gate? Here we exploit a superconducting platform to answer this question in the case of a quantum gate realized by a resonant drive field. During the gate, the superconducting qubit becomes entangled with the microwave drive pulse so that there is a quantum superposition between energy flows. We measure the energy change in the drive field conditioned on the outcome of a projective qubit measurement. We demonstrate that the drive's energy change associated with the measurement backaction can exceed by far the energy that can be extracted by the qubit. This can be understood by considering the qubit as a weak measurement apparatus of the driving field.
△ Less
Submitted 24 August, 2022; v1 submitted 20 September, 2021;
originally announced September 2021.
-
Dissipative stabilization of squeezing beyond 3 dB in a microwave mode
Authors:
R. Dassonneville,
R. Assouly,
T. Peronnin,
A. A. Clerk,
A. Bienfait,
B. Huard
Abstract:
While a propagating state of light can be generated with arbitrary squeezing by pum** a parametric resonator, the intra-resonator state is limited to 3 dB of squeezing. Here, we implement a reservoir engineering method to surpass this limit using superconducting circuits. Two-tone pum** of a three-wave-mixing element implements an effective coupling to a squeezed bath which stabilizes a squeez…
▽ More
While a propagating state of light can be generated with arbitrary squeezing by pum** a parametric resonator, the intra-resonator state is limited to 3 dB of squeezing. Here, we implement a reservoir engineering method to surpass this limit using superconducting circuits. Two-tone pum** of a three-wave-mixing element implements an effective coupling to a squeezed bath which stabilizes a squeezed state inside the resonator. Using an ancillary superconducting qubit as a probe allows us to perform a direct Wigner tomography of the intra-resonator state. The raw measurement provides a lower bound on the squeezing at about $6.7 \pm 0.2$ dB below the zero-point level. Further, we show how to correct for resonator evolution during the Wigner tomography and obtain a squeezing as high as $8.2 \pm 0.8$ dB. Moreover, this level of squeezing is achieved with a purity of $-0.4 \pm 0.4$ dB.
△ Less
Submitted 8 February, 2021; v1 submitted 4 February, 2021;
originally announced February 2021.
-
Number-resolved photocounter for propagating microwave mode
Authors:
Rémy Dassonneville,
Réouven Assouly,
Théau Peronnin,
Pierre Rouchon,
Benjamin Huard
Abstract:
Detectors of propagating microwave photons have recently been realized using superconducting circuits. However a number-resolved photocounter is still missing. In this letter, we demonstrate a single-shot counter for propagating microwave photons that can resolve up to $3$ photons. It is based on a pumped Josephson Ring Modulator that can catch an arbitrary propagating mode by frequency conversion…
▽ More
Detectors of propagating microwave photons have recently been realized using superconducting circuits. However a number-resolved photocounter is still missing. In this letter, we demonstrate a single-shot counter for propagating microwave photons that can resolve up to $3$ photons. It is based on a pumped Josephson Ring Modulator that can catch an arbitrary propagating mode by frequency conversion and store its quantum state in a stationary memory mode. A transmon qubit then counts the number of photons in the memory mode using a series of binary questions. Using measurement based feedback, the number of questions is minimal and scales logarithmically with the maximal number of photons. The detector features a detection efficiency of $0.96 \pm 0.04$, and a dark count probability of $0.030 \pm 0.002$ for an average dead time of $4.5~\mathrm{μs}$. To maximize its performance, the device is first used as an \emph{in situ} waveform detector from which an optimal pump is computed and applied. Depending on the number of incoming photons, the detector succeeds with a probability that ranges from $(54 \pm 2)\%$ to $99\%$.
△ Less
Submitted 15 October, 2020; v1 submitted 10 April, 2020;
originally announced April 2020.
-
Observation of superconductivity and surface noise using a single trapped ion as a field probe
Authors:
K. Lakhmanskiy,
P. C. Holz,
D. Schärtl,
B. Ames,
R. Assouly,
T. Monz,
Y. Colombe,
R. Blatt
Abstract:
Measuring and understanding electric field noise from bulk material and surfaces is important for many areas of physics. In this work, we introduce a method to detect in situ different sources of electric field noise using a single trapped ion as a sensor. We demonstrate the probing of electric field noise as small as $S_E = 5.2(11)\times 10^{-16}\,\text{V}^2\text{m}^{-2}\text{Hz}^{-1}$, the lowes…
▽ More
Measuring and understanding electric field noise from bulk material and surfaces is important for many areas of physics. In this work, we introduce a method to detect in situ different sources of electric field noise using a single trapped ion as a sensor. We demonstrate the probing of electric field noise as small as $S_E = 5.2(11)\times 10^{-16}\,\text{V}^2\text{m}^{-2}\text{Hz}^{-1}$, the lowest noise level observed with a trapped ion to our knowledge. Our setup incorporates a controllable noise source utilizing a high-temperature superconductor. This element allows us, first, to benchmark and validate the sensitivity of our probe. Second, to probe non-invasively bulk properties of the superconductor, observing for the first time a superconducting transition with an ion. For temperatures below the transition, we use our setup to assess different surface noise processes. The measured noise shows a crossover regime in the frequency domain, which cannot be explained by existing surface noise models. Our results open perspectives for new models in surface science and pave the way to test them experimentally.
△ Less
Submitted 3 September, 2019; v1 submitted 2 May, 2018;
originally announced May 2018.
