Showing 1–50 of 178 results for author: team, T

First demonstration of Super-X divertor exhaust control for transient heat load management in compact fusion reactors

Authors: B. Kool, K. Verhaegh, G. L. Derks, T. A. Wijkamp, N. Lonigro, R. Doyle, G. McArdle, C. Vincent, J. Lovell, F. Federici, S. S. Henderson, R. T. Osawa, D. Brida, H. Reimerdes, M. van Berkel, The EUROfusion tokamak exploitation team, the MAST-U team

Abstract: Nuclear fusion could offer clean, abundant energy. However, managing the immense power exhausted from the core fusion plasma towards the divertor remains a major challenge. This is compounded in emerging compact reactor designs which promise more cost-effective pathways towards commercial fusion energy. Alternative divertor configurations (ADCs) are a potential solution to this challenge. In this… ▽ More Nuclear fusion could offer clean, abundant energy. However, managing the immense power exhausted from the core fusion plasma towards the divertor remains a major challenge. This is compounded in emerging compact reactor designs which promise more cost-effective pathways towards commercial fusion energy. Alternative divertor configurations (ADCs) are a potential solution to this challenge. In this work, we demonstrate exhaust control in ADCs for the first time, on MAST-U. We employ a novel diagnostic strategy for the neutral gas buffer which shields the target. Our work shows that ADCs tackle key risks and uncertainties in realising fusion energy: 1) an enlarged operating window which 2) improves exhaust control through the absorption of transients which can remove the neutral shield and damage the divertor, 3) isolation of each divertor from other reactor regions, enabling combined control. This showcases real-world benefits of alternative divertors for effective heat load management and control in reactors. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Runaway electron beam formation, vertical motion, termination and wall loads in EU-DEMO

Authors: F. Vannini, V. Bandaru, H. Bergstroem, N. Schwarz, F. J. Artola, M. Hoelzl, G. Pautasso, E. Nardon, F. Maviglia, M. L. Richiusa, E. Emanuelli, the JOREK team

Abstract: Runaway electron loads onto material structures are a major concern for future large tokamaks due to the efficient avalanching at high plasma currents. Here, we perform predictive studies using the JOREK code for a plausible plasma configuration in the European DEMO fusion power plant with focus on a pessimistic scenario in which a multi mega-ampere runaway electron beam is formed. The work first… ▽ More Runaway electron loads onto material structures are a major concern for future large tokamaks due to the efficient avalanching at high plasma currents. Here, we perform predictive studies using the JOREK code for a plausible plasma configuration in the European DEMO fusion power plant with focus on a pessimistic scenario in which a multi mega-ampere runaway electron beam is formed. The work first comprises axisymmetric predictions of runaway electron beam formation in a mitigated scenario and of the simultaneous vertical motion of the beam due to loss of position control. The subsequent runaway electron beam termination triggered by a burst of MHD activity during the course of the vertical motion is then simulated in 3D with the runaway electron fluid self-consistently coupled to the MHD modes. Finally, the resulting deposition pattern of the runaway electrons onto wall structures is calculated with a relativistic test particle approach. This way, the suitability of a possible sacrificial limiter concept for the protection of first wall components is assessed. △ Less

Submitted 4 July, 2024; originally announced July 2024.

3D MHD modelling of plasmoid drift following massive material injection in a tokamak

Authors: M. Kong, E. Nardon, D. Bonfiglio, M. Hoelzl, D. Hu, the JOREK team, the EUROfusion Tokamak Exploitation Team

Abstract: Mechanisms of plasmoid drift in the presence of massive material injection are studied via 3D non-linear MHD modelling with the JOREK code, using a transient neutral source deposited on the low field side midplane of a JET H-mode plasma to clarify basic processes and compare with existing theory. The simulations confirm the important role of the propagation of shear Alfvén waves (SAWs) from both e… ▽ More Mechanisms of plasmoid drift in the presence of massive material injection are studied via 3D non-linear MHD modelling with the JOREK code, using a transient neutral source deposited on the low field side midplane of a JET H-mode plasma to clarify basic processes and compare with existing theory. The simulations confirm the important role of the propagation of shear Alfvén waves (SAWs) from both ends of the plasmoid ("SAW braking") and the development of external resistive currents along magnetic field lines ("Pégourié braking") in limiting charge separation and thus the $\mathbf{E}\times \mathbf{B}$ plasmoid drift, where $\mathbf{E}$ and $\mathbf{B}$ are the electric and magnetic fields, respectively. The drift velocity is found to be limited by the SAW braking for cases with relatively small source amplitude while the Pégourié braking is shown to be stronger with larger toroidal extent of the source, both in good agreement with existing theory. The simulations also identity the key role of the size of the $\mathbf{E}\times \mathbf{B}$ flow region on plasmoid drift and show that the saturated velocity caused by dominant SAW braking agrees well with theory when considering an effective pressure within the $\mathbf{E}\times \mathbf{B}$ flow region. The existence of SAWs in the simulations is demonstrated and the 3D picture of plasmoid drift is also discussed. △ Less

Submitted 1 July, 2024; originally announced July 2024.

Comments: To be submitted to Nuclear Fusion

Measurement of zero-frequency fluctuations generated by coupling between Alfvén modes in the JET tokamak

Authors: Juan Ruiz Ruiz, Jeronimo Garcia, Michael Barnes, Mykola Dreval, Carine Giroud, Valerian H. Hall-Chen, Michael R. Hardman, Jon C. Hillesheim, Yevgen Kazakov, Samuele Mazzi, Felix I. Parra, Bhavin S. Patel, Alexander A. Schekochihin, Ziga Stancar, the JET Contributors, the EUROfusion Tokamak Exploitation Team

Abstract: We report the first experimental detection of a zero-frequency fluctuation that is pumped by an Alfvén mode in a magnetically confined plasma. Core-localized bidirectional Alfvén modes of frequency inside the toroidicity-induced gap (and its harmonics) exhibit three-wave coupling interactions with a zero-frequency fluctuation. The observation of the zero-frequency fluctuation is consistent with th… ▽ More We report the first experimental detection of a zero-frequency fluctuation that is pumped by an Alfvén mode in a magnetically confined plasma. Core-localized bidirectional Alfvén modes of frequency inside the toroidicity-induced gap (and its harmonics) exhibit three-wave coupling interactions with a zero-frequency fluctuation. The observation of the zero-frequency fluctuation is consistent with theoretical and numerical predictions of zonal modes pumped by Alfvén modes, and is correlated with an increase in the deep core ion temperature, temperature gradient, and confinement factor $H_{89,P}$. Despite the energetic particle transport induced by the Alfvén eigenmodes, the generation of a zero-frequency fluctuation that can suppress the turbulence leads to an overall improvement of confinement. △ Less

Submitted 1 July, 2024; originally announced July 2024.

First Ion Temperature Measurements in the MAST-U Divertor via Retarding Field Energy Analyzer

Authors: Y. Damizia, S. Elmore, P. Ryan, S. Allan, F. Federici, N. Osborne, J. W. Bradley, the MAST-U Team

Abstract: This study presents the first ion temperature (\(T_i\)) measurements from the MAST-U divertor using a Retarding Field Energy Analyzer (RFEA). Embedded within the flat tile of the closed divertor chamber, the RFEA captures \(T_i\) profiles across various plasma scenarios, including transitions to the Super-X configuration. Measurements were conducted under steady-state and transient plasma conditio… ▽ More This study presents the first ion temperature (\(T_i\)) measurements from the MAST-U divertor using a Retarding Field Energy Analyzer (RFEA). Embedded within the flat tile of the closed divertor chamber, the RFEA captures \(T_i\) profiles across various plasma scenarios, including transitions to the Super-X configuration. Measurements were conducted under steady-state and transient plasma conditions characterized by a plasma current (\(I_p\)) of 750 kA, electron density (\(n_e\)) between \(2.2 \times 10^{19}\) and \(4.45 \times 10^{19}\,\text{m}^{-3}\), and Neutral Beam Injection (NBI) power ranging from 3.0 MW to 3.2 MW. The ion temperatures, peaking at approximately 20 eV in steady state, were compared with electron temperatures (\(T_e\)) obtained from Langmuir probes (LP) at identical radial positions. The study also examined ion saturation current density (\(J_{\text{sat}}\)) signals to using methodologies similar to previous MAST experiments. Preliminary findings reveal a \(T_i/T_e\) ratio ranging from 1 to 2.5. Additionally, high temporal resolution measurements (100 $μs$) captured the dynamics of Edge Localized Modes (ELMs), showing \(T_i\) peaks at 16.03 +- 1.84 eV during ELM events, nearly three times higher than inter-ELM temperatures. △ Less

Submitted 1 July, 2024; originally announced July 2024.

Correlation of the L-mode density limit with edge collisionality

Authors: Andrew Maris, Cristina Rea, Alessandro Pau, Wenhui Hu, Bingjia Xiao, Robert Granetz, Earl Marmar, the EUROfusion Tokamak Exploitation team, the Alcator C-Mod team, the ASDEX Upgrade team, the DIII-D team, the EAST team, the TCV team

Abstract: The "density limit" is one of the fundamental bounds on tokamak operating space, and is commonly estimated via the empirical Greenwald scaling. This limit has garnered renewed interest in recent years as it has become clear that ITER and many tokamak pilot plant concepts must operate near or above the widely-used Greenwald limit to achieve their objectives. Evidence has also grown that the Greenwa… ▽ More The "density limit" is one of the fundamental bounds on tokamak operating space, and is commonly estimated via the empirical Greenwald scaling. This limit has garnered renewed interest in recent years as it has become clear that ITER and many tokamak pilot plant concepts must operate near or above the widely-used Greenwald limit to achieve their objectives. Evidence has also grown that the Greenwald scaling - in its remarkable simplicity - may not capture the full complexity of the disruptive density limit. In this study, we assemble a multi-machine database to quantify the effectiveness of the Greenwald limit as a predictor of the L-mode density limit and identify alternative stability metrics. We find that a two-parameter dimensionless boundary in the plasma edge, $ν_{*\rm, edge}^{\rm limit} = 3.0 β_{T,{\rm edge}}^{-0.4}$, achieves significantly higher accuracy (true negative rate of 97.7% at a true positive rate of 95%) than the Greenwald limit (true negative rate 86.1% at a true positive rate of 95%) across a multi-machine dataset including metal- and carbon-wall tokamaks (AUG, C-Mod, DIII-D, and TCV). The collisionality boundary presented here can be applied for density limit avoidance in current devices and in ITER, where it can be measured and responded to in real time. △ Less

Submitted 26 June, 2024; originally announced June 2024.

Comments: 27 pages, 9 figures

Inferring the scrape-off layer heat flux width in a divertor with a low degree of axisymmetry

Authors: C. Marsden, X. Zhang, M. Moscheni, T. K. Gray, E. Vekshina, A. Rengle, A. Scarabosio, M. Sertoli, M. Romanelli, the ST40 team

Abstract: Plasma facing components (PFCs) in the next generation of tokamak devices will operate in challenging environments, with heat loads predicted to exceed 10 MWm$^{-2}$. The magnitude of these heat loads is set by the width of the channel, the "scrape-off layer" (SOL), into which heat is exhausted, and can be characterised by an e-folding length scale for the decay of heat flux across the channel. It… ▽ More Plasma facing components (PFCs) in the next generation of tokamak devices will operate in challenging environments, with heat loads predicted to exceed 10 MWm$^{-2}$. The magnitude of these heat loads is set by the width of the channel, the "scrape-off layer" (SOL), into which heat is exhausted, and can be characterised by an e-folding length scale for the decay of heat flux across the channel. It is expected this channel will narrow as tokamaks move towards reactor relevant conditions. Understanding the processes involved in setting the SOL heat flux width is imperative to be able to predict the heat loads PFCs must handle in future devices. Measurements of the SOL width are performed on the high-field spherical tokamak, ST40, using a newly commissioned infrared thermography system. With its high on-axis toroidal magnetic field ($\geq$1.5 T) ST40 is uniquely positioned to investigate the influence of toroidal field on the heat flux width in spherical tokamaks, whilst also extending measurements of the SOL width in spherical tokamaks to increased poloidal field ($\geq$0.3 T). Due to the divertor on ST40 having a low degree of axisymmetry, it is necessary for a set of radial measurements of the heat flux to be taken across the divertor, made possible using an automated toolchain that fully incorporates its 3D geometry. These radial profiles are combined with the magnetic topology of the plasma to infer the width of the SOL, with both single and double exponential profiles of heat flux observed. A reduction in the heat flux is observed toroidally across part of the divertor, with preliminary investigations indicating that partial shadowing occurs, resulting from the separation between magnetic field lines and trailing edges upstream of the observed region becoming comparable to the ion gyro-radius. △ Less

Submitted 24 June, 2024; originally announced June 2024.

Comments: 7 pages, 5 figures, Submitted to the Journal of Nuclear Materials and Energy Special Issue : Proceedings of 26th International Conference on Plasma Surface Interactions in Controlled Fusion Devices

First experimental observation of zonal flows in the optimized stellarator Wendelstein 7-X

Authors: D. Carralero, T. Estrada, J. M. García-Regaña, E. Sánchez, T. Windisch, A. Alonso, E. Maragkoudakis, C. Brandt, K. J. Brunner, C. Gallego-Castillo, K. Rahbarnia, H. Thienpondt, the Wendelstein 7-X Team

Abstract: In this work, we present the first experimental evidence of the presence of zonal flow (ZF) structures in the optimized stellarator Wendelstein 7-X. Using an assortment of diagnostics, flux surface-uniform, electrostatic flow oscillations have been measured, showing a radial scale in the range of tens of ion gyroradii. Such measurements show remarkable agreement with the ZF predicted by local and… ▽ More In this work, we present the first experimental evidence of the presence of zonal flow (ZF) structures in the optimized stellarator Wendelstein 7-X. Using an assortment of diagnostics, flux surface-uniform, electrostatic flow oscillations have been measured, showing a radial scale in the range of tens of ion gyroradii. Such measurements show remarkable agreement with the ZF predicted by local and global non-linear gyrokinetic simulations. These results represent the first direct measurement of ZF in a large stellarator, suitable for the validation of models in reactor relevant conditions. △ Less

Submitted 18 June, 2024; originally announced June 2024.

Comments: Submitted to Physical Review Letters

Experimental observations of bifurcated power decay lengths in the near Scrape-Off Layer of tokamak plasmas

Authors: X Zhang, C Marsden, M Moscheni, E Maartensson, A Rengle, M Robinson, T OGorman, H F Lowe, E Vekshina, S Janhunen, P F Buxton, M Sertoli, M Romanelli, A Scarabosio, T K Gray, N A Lopez, the ST40 Team

Abstract: The scrape-off layer parallel heat flux decay lengths measured at ST40, a high field, low aspect ratio spherical tokamak, have been observed to bifurcate into two groups. The wide group matches closely with the scale of ion poloidal Larmour radius and follows existing H-mode scalings, while the narrow group falls up to 10 times below scalings, on the scale of ion total Larmour radius. The onset of… ▽ More The scrape-off layer parallel heat flux decay lengths measured at ST40, a high field, low aspect ratio spherical tokamak, have been observed to bifurcate into two groups. The wide group matches closely with the scale of ion poloidal Larmour radius and follows existing H-mode scalings, while the narrow group falls up to 10 times below scalings, on the scale of ion total Larmour radius. The onset of the narrow scrape-off layer width is observed to be associated with suppressed magnetic fluctuations, suggesting reduced electromagnetic turbulence levels in the SOL. △ Less

Submitted 23 May, 2024; originally announced May 2024.

Comments: 6 pages, 4 figures

The Realization of a Gas Puff Imaging System on the Wendelstein 7-X Stellarator

Authors: J. L. Terry, A. von Stechow, S. G. Baek, S. B. Ballinger, O. Grulke, C. von Sehren, R. Laube, C. Killer, F. Scharmer, K. J. Brunner, J. Knauer, S. Bois, the W7-X Team

Abstract: A system for studying the spatio-temporal dynamics of fluctuations in the boundary of the W7-X plasma using the Gas-Puff Imaging (GPI) technique has been designed, constructed, installed, and operated. This GPI system addresses a number of challenges specific to long-pulse superconducting devices like W7-X, including the long distance between the plasma and the vacuum vessel wall, the long distanc… ▽ More A system for studying the spatio-temporal dynamics of fluctuations in the boundary of the W7-X plasma using the Gas-Puff Imaging (GPI) technique has been designed, constructed, installed, and operated. This GPI system addresses a number of challenges specific to long-pulse superconducting devices like W7-X, including the long distance between the plasma and the vacuum vessel wall, the long distance between the plasma and diagnostic ports, the range of last closed flux surface locations for different magnetic configurations in W7-X, and management of heat loads on the system's plasma-facing components. The system features a pair of "converging-diverging" nozzles for partially collimating the gas puffed locally $\approx$135 mm radially outboard of the plasma boundary, a pop-up turning mirror for viewing the gas puff emission from the side (also acting as a shutter for the re-entrant vacuum window), and a high-throughput optical system that collects visible emission resulting from the interaction between the puffed gas and the plasma and directs it along a water-cooled re-entrant tube directly onto the 8 x 16 pixel detector array of the fast camera. The DEGAS 2 neutrals code was used to simulate the H$_α$ (656 nm) and the HeI (587 nm) line emission expected from well-characterized gas-puffs of H$_2$ and He and excited within typical edge plasma profiles in W7-X, thereby predicting line brightnesses used to reduce the risks associated with system sensitivity and placement of the field of view. Operation of GPI on W7-X shows excellent signal to noise ratios (>100) over the field of view for minimally perturbing gas puffs. The GPI system provides detailed measurements of the 2-dimensional (radial and poloidal) dynamics of plasma fluctuations in the W7-X edge, scrape-off layer, and in and around the magnetic islands that make up the island divertor configuration employed on W7-X. △ Less

Submitted 15 May, 2024; originally announced May 2024.

Comments: 30 pages, 23 figures, submitted to Review of Scientific Instruments

Neural-Parareal: Dynamically Training Neural Operators as Coarse Solvers for Time-Parallelisation of Fusion MHD Simulations

Authors: S. J. P. Pamela, N. Carey, J. Brandstetter, R. Akers, L. Zanisi, J. Buchanan, V. Gopakumar, M. Hoelzl, G. Huijsmans, K. Pentland, T. James, G. Antonucci, the JOREK Team

Abstract: The fusion research facility ITER is currently being assembled to demonstrate that fusion can be used for industrial energy production, while several other programmes across the world are also moving forward, such as EU-DEMO, CFETR, SPARC and STEP. The high engineering complexity of a tokamak makes it an extremely challenging device to optimise, and test-based optimisation would be too slow and to… ▽ More The fusion research facility ITER is currently being assembled to demonstrate that fusion can be used for industrial energy production, while several other programmes across the world are also moving forward, such as EU-DEMO, CFETR, SPARC and STEP. The high engineering complexity of a tokamak makes it an extremely challenging device to optimise, and test-based optimisation would be too slow and too costly. Instead, digital design and optimisation must be favored, which requires strongly-coupled suites of High-Performance Computing calculations. In this context, having surrogate models to provide quick estimates with uncertainty quantification is essential to explore and optimise new design options. Furthermore, these surrogates can in turn be used to accelerate simulations in the first place. This is the case of Parareal, a time-parallelisation method that can speed-up large HPC simulations, where the coarse-solver can be replaced by a surrogate. A novel framework, Neural-Parareal, is developed to integrate the training of neural operators dynamically as more data becomes available. For a given input-parameter domain, as more simulations are being run with Parareal, the large amount of data generated by the algorithm is used to train new surrogate models to be used as coarse-solvers for future Parareal simulations, leading to progressively more accurate coarse-solvers, and thus higher speed-up. It is found that such neural network surrogates can be much more effective than traditional coarse-solver in providing a speed-up with Parareal. This study is a demonstration of the convergence of HPC and AI which simply has to become common practice in the world of digital engineering design. △ Less

Submitted 2 May, 2024; originally announced May 2024.

Implementation of matrix compression in the coupling of JOREK to realistic 3D conducting wall structures

Authors: Federico Cipolletta, Nina Schwarz, Matthias Hoelzl, Salvatore Ventre, Nicola Isernia, Guglielmo Rubinacci, Alejandro Soba, Mervi Johanna Mantsinen, the JOREK Team

Abstract: JOREK is an advanced non-linear simulation code for studying MHD instabilities in magnetically confined fusion plasmas and their control and/or mitigation. A free-boundary and resistive wall extension was introduced via coupling to the STARWALL and CARIDDI codes, both able to provide dense response matrices describing the electromagnetic interactions between plasma and conducting structures. For d… ▽ More JOREK is an advanced non-linear simulation code for studying MHD instabilities in magnetically confined fusion plasmas and their control and/or mitigation. A free-boundary and resistive wall extension was introduced via coupling to the STARWALL and CARIDDI codes, both able to provide dense response matrices describing the electromagnetic interactions between plasma and conducting structures. For detailed CAD representations of the conducting structures and high resolutions for the plasma region, memory and computing time limitations restrict the possibility of simulating the ITER tokamak. In the present work, the Singular Value Decomposition provided by routines from the ScaLAPACK library has been successfully applied to compress some of the dense response matrices and thus optimize memory usage. This is demonstrated for simulations of Tearing Mode and Vertical Displacement Event instabilities. An outlook to future applications on large production cases and further extensions of the method are discussed. △ Less

Submitted 25 April, 2024; originally announced April 2024.

Comments: 19 pages, 9 figures, firstly presented at the 4th Fusion HPC Workshop in November 2023, submitted to Plasma Physics and Controlled Fusion in April 2024

First 2D electron density measurements using Coherence Imaging Spectroscopy in the MAST-U Super-X divertor

Authors: N. Lonigro, R. Doyle, J. S. Allcock, B. Lipschultz, K. Verhaegh, C. Bowman, D. Brida, J. Harrison, O. Myatra, S. Silburn, C. Theiler, T. A. Wijkamp, MAST-U Team, the EUROfusion Tokamak Exploitation Team

Abstract: 2D profiles of electron density and neutral temperature are inferred from multi-delay Coherence Imaging Spectroscopy data of divertor plasmas using a non-linear inversion technique. The inference is based on imaging the spectral line-broadening of Balmer lines and can differentiate between the Doppler and Stark broadening components by measuring the fringe contrast at multiple interferometric dela… ▽ More 2D profiles of electron density and neutral temperature are inferred from multi-delay Coherence Imaging Spectroscopy data of divertor plasmas using a non-linear inversion technique. The inference is based on imaging the spectral line-broadening of Balmer lines and can differentiate between the Doppler and Stark broadening components by measuring the fringe contrast at multiple interferometric delays simultaneously. The model has been applied to images generated from simulated density profiles to evaluate its performance. Typical mean absolute errors of 30 percent are achieved, which are consistent with Monte Carlo uncertainty propagation accounting for noise, uncertainties in the calibrations, and in the model inputs. The analysis has been tested on experimental data from the MAST-U Super-X divertor, where it infers typical electron densities of 2-3 $10^{19}$ m$^{-3}$ and neutral temperatures of 0-2 eV during beam-heated L-mode discharges. The results are shown to be in reasonable agreement with the other available diagnostics. △ Less

Submitted 18 April, 2024; originally announced April 2024.

Quantification of locked mode instability triggered by a change in confinement

Authors: M. Peterka, J. Seidl, T. Markovic, A. Loarte, N. C. Logan, J. -K. Park, P. Cahyna, J. Havlicek, M. Imrisek, L. Kripner, R. Panek, M. Sos, P. Bilkova, K. Bogar, P. Bohm, A. Casolari, Y. Gribov, O. Grover, P. Hacek, M. Hron, K. Kovarik, M. Tomes, D. Tskhakaya, J. Varju, P. Vondracek , et al. (2 additional authors not shown)

Abstract: This work presents the first analysis of the disruptive locked mode (LM) triggered by the dynamics of a confinement change. It shows that, under certain conditions, the LM threshold during the transient is significantly lower than expected from steady states. We investigate the sensitivity to a controlled $n = 1$ error field (EF) activated prior to the L-H transition in the COMPASS tokamak, at… ▽ More This work presents the first analysis of the disruptive locked mode (LM) triggered by the dynamics of a confinement change. It shows that, under certain conditions, the LM threshold during the transient is significantly lower than expected from steady states. We investigate the sensitivity to a controlled $n = 1$ error field (EF) activated prior to the L-H transition in the COMPASS tokamak, at $q_{95} \approx 3$, $β_N \approx 1$, and using EF coils on the high-field side of the vessel. A threshold for EF penetration subsequent to the L-H transition is identified, which shows no significant trend with density or applied torque, and is an apparent consequence of the reduced intrinsic rotation of the 2/1 mode during this transient phase. This finding challenges the assumption made in theoretical and empirical works that natural mode rotation can be predicted by global plasma parameters and urges against using any parametric EF penetration scaling derived from steady-state experiments to define the error field correction strategy in the entire discharge. Furthermore, even at EFs below the identified penetration threshold, disruptive locking of sawtooth-seeded 2/1 tearing modes is observed after about 30% of L-H transitions without external torque. △ Less

Submitted 17 April, 2024; originally announced April 2024.

Comments: 15 pages, 13 figures, submitted to Nuclear Fusion

Expulsion of runaway electrons using ECRH in the TCV tokamak

Authors: J. Decker, M. Hoppe, U. Sheikh, B. P. Duval, G. Papp, L. Simons, T. Wijkamp, J. Cazabonne, S. Coda, E. Devlaminck, O. Ficker, R. Hellinga, U. Kumar, Y. Savoye-Peysson, L. Porte, C. Reux, C. Sommariva, A. Tema Biwolé, B. Vincent, L. Votta, the TCV Team, the EUROfusion Tokamak Exploitation Team

Abstract: Runaway electrons (REs) are a concern for tokamak fusion reactors from discharge startup to termination. A sudden localized loss of a multi-megaampere RE beam can inflict severe damage to the first wall. Should a disruption occur, the existence of a RE seed may play a significant role in the formation of a RE beam and the magnitude of its current. The application of central electron cyclotron reso… ▽ More Runaway electrons (REs) are a concern for tokamak fusion reactors from discharge startup to termination. A sudden localized loss of a multi-megaampere RE beam can inflict severe damage to the first wall. Should a disruption occur, the existence of a RE seed may play a significant role in the formation of a RE beam and the magnitude of its current. The application of central electron cyclotron resonance heating (ECRH) in the Tokamak à Configuration Variable (TCV) reduces an existing RE seed population by up to three orders of magnitude within only a few hundred milliseconds. Applying ECRH can also prevent the formation of a post-disruption RE beam where it would otherwise be expected. The RE expulsion rate and consequent RE current reduction are found to increase with applied ECRH power. Whereas central ECRH is effective in expelling REs, off-axis ECRH has a comparatively limited effect. A simple 0-D model for the evolution of the RE population is presented that explains the effective ECRH-induced RE expulsion results from the combined effects of increased electron temperature and enhanced RE transport. △ Less

Submitted 15 April, 2024; originally announced April 2024.

Global gyrokinetic analysis of Wendelstein 7-X discharge: unveiling the importance of trapped-electron-mode and electron-temperature-gradient turbulence

Authors: Felix Wilms, Alejandro Bañón Navarro, Thomas Windisch, Sergey Bozhenkov, Felix Warmer, Golo Fuchert, Oliver Ford, Daihong Zhang, Torsten Stange, Frank Jenko, the W7-X Team

Abstract: We present the first nonlinear, gyrokinetic, radially global simulation of a discharge of the Wendelstein 7-X-like stellarator (W7-X), including kinetic electrons, an equilibrium radial electric field, as well as electromagnetic and collisional effects. By comparison against flux-tube and full-flux-surface simulations, we assess the impact of the equilibrium ExB-flow and flow shear on the stabilis… ▽ More We present the first nonlinear, gyrokinetic, radially global simulation of a discharge of the Wendelstein 7-X-like stellarator (W7-X), including kinetic electrons, an equilibrium radial electric field, as well as electromagnetic and collisional effects. By comparison against flux-tube and full-flux-surface simulations, we assess the impact of the equilibrium ExB-flow and flow shear on the stabilisation of turbulence. In contrast to the existing literature, we further provide substantial evidence for the turbulent electron heat flux being driven by trapped-electron-mode (TEM) and electron-temperature-gradient (ETG) turbulence in the core of the plasma. The former manifests as a hybrid together with ion-temperature-gradient (ITG) turbulence and is primarily driven by the finite electron temperature gradient, which has largely been neglected in nonlinear stellarator simulations presented in the existing literature. △ Less

Submitted 22 February, 2024; originally announced February 2024.

Nonlinear MHD modeling of soft $β$ limits in W7-AS

Authors: Rohan Ramasamy, Ksenia Aleynikova, Nikita Nikulsin, Florian Hindenlang, Ihor Holod, Erika Strumberger, Matthias Hoelzl, the JOREK team

Abstract: An important question for the outlook of stellarator reactors is their robustness against pressure driven modes, and the underlying mechanism behind experimentally observed soft $β$ limits. Towards building a robust answer to these questions, simulation studies are presented using a recently derived reduced nonlinear MHD model. First, the initial model implementation is extended to capture fluid c… ▽ More An important question for the outlook of stellarator reactors is their robustness against pressure driven modes, and the underlying mechanism behind experimentally observed soft $β$ limits. Towards building a robust answer to these questions, simulation studies are presented using a recently derived reduced nonlinear MHD model. First, the initial model implementation is extended to capture fluid compression by including the influence of parallel flows. Linear benchmarks of a (2, 1) tearing mode in W7-AS geometry, and interchange modes in a finite $β$, net-zero current carrying stellarator with low magnetic shear are then used to demonstrate the modeling capabilities. Finally, a validation study is conducted on experimental reconstructions of finite $β$ W7-AS discharges. In agreement with past experimental analysis, it is shown that (i) the MHD activity is resistive, (ii) a soft $β$ limit is observed, when the plasma resistivity approaches the estimated experimental value, and (iii) low $n$ MHD activity is observed at intermediate $β$ values, particularly a nonlinearly dominant (2, 1) mode. The MHD activity is mild, explaining the soft $β$ limit, because the plasma volume remains separated into distinct sub-volumes in which field lines are ergodically confined. For the assumed transport parameters, the enhanced perpendicular transport along stochastic magnetic field lines can be overcome with the experimental heating power. The limitations in the current modeling are described, alongside an outlook for characterising soft $β$ limits in more detail in future work. △ Less

Submitted 5 February, 2024; originally announced February 2024.

Comments: Submitted to Nuclear Fusion

Characteristics of the Alfvénic activity during the current quench in ASDEX Upgrade

Authors: P. Heinrich, G. Papp, Ph. Lauber, G. Pautasso, M. Dunne, M. Maraschek, V. Igochine, O. Linder, the ASDEX Upgrade Team, the EUROfusion Tokamak Exploitation Team

Abstract: ASDEX Upgrade has developed multiple massive gas injection (MGI) scenarios to investigate runaway electron (RE) dynamics. During the current quench of the MGI induced disruptions, Alfvénic activity is observed in the 300-800 kHz range. With the help of a mode tracing algorithm based on Fourier spectrograms, mode behaviour was classified for 180 discharges. The modes have been identified as global… ▽ More ASDEX Upgrade has developed multiple massive gas injection (MGI) scenarios to investigate runaway electron (RE) dynamics. During the current quench of the MGI induced disruptions, Alfvénic activity is observed in the 300-800 kHz range. With the help of a mode tracing algorithm based on Fourier spectrograms, mode behaviour was classified for 180 discharges. The modes have been identified as global Alfvén eigenmodes using linear gyrokinetic MHD simulations. Changes in the Alfvén continuum during the quench are proposed as explanation for the strong frequency sweep observed. A systematic statistical analysis shows no significant connection of the mode characteristics to the dynamics of the subsequent runaway electron beams. In our studies, the appearance and amplitude of the modes does not seem to affect the potential subsequent runaway beam. Beyond the scope of the 180 investigated dedicated RE experiments, the Alfvénic activity is also observed in natural disruptions with no RE beam forming. △ Less

Submitted 2 February, 2024; originally announced February 2024.

Comments: 15 (+5 Appendix) pages, 15 (+1 Appendix) figures, submitted paper, Additional details on each classification/method openly available in my master's thesis, see http://hdl.handle.net/21.11116/0000-0008-ED5A-9

Modelling of power exhaust in TCV positive and negative triangularity L-mode plasmas

Authors: E. Tonello, F. Mombelli, O. Février, G. Alberti, T. Bolzonella, G. Durr-Legoupil-Nicoud, S. Gorno, H. Reimerdes, C. Theiler, N. Vianello, M. Passoni, the TCV team, the WPTE team

Abstract: L-mode negative triangularity (NT) operation is a promising alternative to the positive triangularity (PT) H-mode as a high-confinement ELM-free operational regime. In this work, two TCV L-mode lower single null Ohmic discharges with opposite triangularity $δ\simeq \pm 0.3$ are investigated using SOLPS-ITER modelling. The main focus is the exploration of the reasons behind the experimentally obser… ▽ More L-mode negative triangularity (NT) operation is a promising alternative to the positive triangularity (PT) H-mode as a high-confinement ELM-free operational regime. In this work, two TCV L-mode lower single null Ohmic discharges with opposite triangularity $δ\simeq \pm 0.3$ are investigated using SOLPS-ITER modelling. The main focus is the exploration of the reasons behind the experimentally observed feature of NT plasmas being more difficult to detach than similar PT experiments. SOLPS-ITER simulations are performed assuming the same anomalous diffusivity for particles $D_n^{AN}$ and energy $κ_{e/i}^{AN}$ in PT and NT. Nonetheless, the results clearly show dissimilar transport and accumulation of neutral particles in the scrape-off layer (SOL) of the two configurations, which consequently gives rise to different ionization sources for the plasma and produces different poloidal and cross-field fluxes. Simulations also recover the experimental feature of the outer target being hotter in the NT scenario (with $T_{e, NT} \gtrsim 5 \, \mathrm{eV}$) than in the PT counterpart. △ Less

Submitted 8 January, 2024; originally announced January 2024.

Comments: 18 pages, 8 figures

Effect of detachment on Magnum-PSI ELM-like pulses: II. Spectroscopic analysis and role of molecular assisted reactions

Authors: Fabio Federici, Bruce Lipschultz, Gijs R. A. Akkermans, Kevin Verhaegh, Matthew L. Reinke, Ray Chandra, Chris Bowman, Ivo G. J. Classen, the Magnum-PSI Team

Abstract: The linear plasma machine Magnum-PSI can replicate similar conditions to those found in a tokamak at the end of the divertor leg. A dedicated capacitor bank, in parallel to the plasma source, can release a sudden burst of energy, leading to a rapid increase in plasma temperature and density, resulting in a transient heat flux increase of half of an order of magnitude, a so called ELM-like pulse. T… ▽ More The linear plasma machine Magnum-PSI can replicate similar conditions to those found in a tokamak at the end of the divertor leg. A dedicated capacitor bank, in parallel to the plasma source, can release a sudden burst of energy, leading to a rapid increase in plasma temperature and density, resulting in a transient heat flux increase of half of an order of magnitude, a so called ELM-like pulse. Throughout both the steady state and the pulse, the neutral pressure in the target chamber is then increased, causing the target to transition from an attached to a detached state. In the first paper related to this study\cite{Federici} direct measurements of the plasma properties are used to qualitatively determine the effect of detachment on the ELM-like pulse. This is used to show the importance of molecular assisted reactions. Molecular processes, and especially molecular activated dissociation, are found to be important in the exchange of potential energy with the plasma, while less so in radiating the energy from the ELM-like pulse. At low target chamber pressure, the plasma generated via ionisation during the part of the ELM-like pulse with the higher temperature is more than that produced by the plasma source, a unique case in linear machines. At high target chamber pressure molecular activated recombination contributes up to a third of the total recombination rate, contributing to the reduction of the target particle flux. Some metrics that estimate the energy lost by the plasma per interactions with neutrals, potentially relevant for the portion of the tokamak divertor leg below $\sim10eV$, are then tentatively obtained. △ Less

Submitted 26 December, 2023; originally announced December 2023.

Comments: 25 pages, 22 figures. To be published in Nuclear Fusion. This paper is the second related to a single experimental session, the first is: "Effect of detachment on Magnum-PSI ELM-like pulses: I. Direct observations and qualitative results", to be published in Nuclear Fusion

Electrostatic microturbulence in W7-X: comparison of local gyrokinetic simulations with Doppler reflectometry measurements

Authors: A. González-Jerez, J. M. García-Regaña, I. Calvo, D. Carralero, T. Estrada, E. Sánchez, M. Barnes, the W7-X Team

Abstract: The first experimental campaigns of Wendelstein 7-X (W7-X) have shown that turbulence plays a decisive role in the performance of neoclassically optimized stellarators. This stresses the importance of understanding microturbulence from the theoretical and experimental points of view. To this end, this paper addresses a comprehensive characterization of the turbulent fluctuations by means of nonlin… ▽ More The first experimental campaigns of Wendelstein 7-X (W7-X) have shown that turbulence plays a decisive role in the performance of neoclassically optimized stellarators. This stresses the importance of understanding microturbulence from the theoretical and experimental points of view. To this end, this paper addresses a comprehensive characterization of the turbulent fluctuations by means of nonlinear gyrokinetic simulations performed with the code stella in two W7-X scenarios. In the first part of the paper, the amplitude of the density fluctuations is calculated and compared with measurements obtained by Doppler reflectometry (DR) in the OP1 experimental campaigns. It is found that the trend of the fluctuations along the radius is explained by the access of the DR system to different regions of the turbulence wavenumber spectrum. In the second part of the article, frequency spectra of the density fluctuations and the zonal component of the turbulent flow are numerically characterized for comparisons against future experimental analyses. Both quantities feature broad frequency spectra with dominant frequencies of O(1)-O(10) kHz. △ Less

Submitted 15 December, 2023; originally announced December 2023.

Comments: 27 pages, 16 figures

Observation of a drift-driven local transport regime in the island divertor of Wendelstein 7-X

Authors: E Flom, D M Kriete, M Krychowiak, N Maaziz, V Perseo, F Reimold, O Schmitz, V Winters, F Henke, D Gradic, R König, the W7-X Team

Abstract: Measurements of the poloidal electron density and temperature distribution in the W7-X island divertor reveal the existence of two distinct scrape-off layer transport regimes. At low and intermediate densities, $T_e$ profiles across the magnetic island are hollow, with a minimum at the island O-point. Above a threshold density $\overline{n}_e \approx 5 \times 10^{19}$ m$^{-3}$, the local minimum v… ▽ More Measurements of the poloidal electron density and temperature distribution in the W7-X island divertor reveal the existence of two distinct scrape-off layer transport regimes. At low and intermediate densities, $T_e$ profiles across the magnetic island are hollow, with a minimum at the island O-point. Above a threshold density $\overline{n}_e \approx 5 \times 10^{19}$ m$^{-3}$, the local minimum vanishes and the $T_e$ profiles become monotonic. At the lowest studied densities, the hollow $T_e$ profiles imply an electrostatic field of up to $\textbf{E}_r \sim 6$ kV/m, which can induce $\textbf{E} \times \textbf{B}$ drifts around the island, with drift velocities of up to $\sim3$ km/s. These $\textbf{E} \times \textbf{B}$ drifts result in strong convective heat transport poloidally around the island, binormal to the magnetic field, which supports the hollow radial temperature profile and hence provides a positive feedback to the electric field. Above the threshold density, these drifts strongly diminish, presumably due to increased anomalous diffusion, which causes the profile hollowness and therefore also the radial electric field to strongly diminish. This argument is supported by comparison to EMC3-EIRENE modeling and an analytical transport analyses showing that an additional, non-diffusive transport channel is required to maintain the profile hollowness up to the densities seen in experiment, and that a poloidal drift transport channel supports such hollowness only up to certain densities. △ Less

Submitted 2 December, 2023; originally announced December 2023.

Comments: 8 pages, submitted to Nuclear Fusion

Validation of SOLPS-ITER Simulations against the TCV-X21 Reference Case

Authors: Y. Wang, C. Colandrea, D. S. Oliveira, C. Theiler, H. Reimerdes, T. Body, D. Galassi, L. Martinelli, K. Lee, TCV team

Abstract: This paper presents a quantitative validation of SOLPS-ITER simulations against the TCV-X21 reference case and provides insights into the neutral dynamics and ionization source distribution in this scenario. TCV-X21 is a well-diagnosed diverted L-mode sheath-limited plasma scenario in both toroidal field directions, designed specifically for the validation of turbulence codes [D.S. Oliveira, T. Bo… ▽ More This paper presents a quantitative validation of SOLPS-ITER simulations against the TCV-X21 reference case and provides insights into the neutral dynamics and ionization source distribution in this scenario. TCV-X21 is a well-diagnosed diverted L-mode sheath-limited plasma scenario in both toroidal field directions, designed specifically for the validation of turbulence codes [D.S. Oliveira, T. Body, et al 2022 Nucl. Fusion 62 096001]. Despite the optimization to reduce the impact of the neutral dynamics, the absence of neutrals in previous turbulence simulations of TCV-X21 was identified as a possible explanation for the disagreements with the experimental data in the divertor region. This motivates the present study with SOLPS-ITER that includes kinetic neutral dynamics via EIRENE. Five new observables are added to the extensive, publicly available TCV-X21 dataset. These are three deuterium Balmer lines in the divertor and neutral pressure in the common and private flux regions. The quantitative agreement metric is combined with the conjugate gradient method to approach the SOLPS-ITER input parameters that return the best overall agreement with the experiment. A proof-of-principle of this method results in a modest improvement in the level-of-agreement; shortcomings of the method and how to improve it are discussed. Alternatively, a scan of the particle and heat diffusion coefficients shows an improvement of 10.4% beyond the agreement level achieved by the gradient method. The result is found for an increased transport coefficient compared to what is usually used for TCV L-mode plasmas, suggesting the need for accurate self-consistent turbulence models for predictive boundary simulations. The simulations indicate that ~65% of the total ionization occurs in the SOL, motivating the inclusion of neutrals in future turbulence simulations towards improved agreement with the experiment. △ Less

Submitted 26 October, 2023; originally announced October 2023.

Comparison of detachment in Ohmic plasmas with positive and negative triangularity

Authors: O. Février, C. K. Tsui, G. Durr-Legoupil-Nicoud, C. Theiler, M. Carpita, S. Coda, C. Colandrea, B. P. Duval, S. Gorno, E. Huett, B. Linehan, A. Perek, L. Porte, H. Reimerdes, O. Sauter, E. Tonello, M. Zurita, T. Bolzonella, F. Sciortino, the TCV Team, the EUROfusion Tokamak Exploitation Team

Abstract: In recent years, negative triangularity (NT) has emerged as a potential high-confinement L-mode reactor solution. In this work, detachment is investigated using core density ramps in lower single null Ohmic L-mode plasmas across a wide range of upper, lower, and average triangularity (the mean of upper and lower triangularity: $δ$) in the TCV tokamak. It is universally found that detachment is mor… ▽ More In recent years, negative triangularity (NT) has emerged as a potential high-confinement L-mode reactor solution. In this work, detachment is investigated using core density ramps in lower single null Ohmic L-mode plasmas across a wide range of upper, lower, and average triangularity (the mean of upper and lower triangularity: $δ$) in the TCV tokamak. It is universally found that detachment is more difficult to access for NT sha**. The outer divertor leg of discharges with $δ\approx -0.3$ could not be cooled to below $5~\mathrm{eV}$ through core density ramps alone. The behavior of the upstream plasma and geometrical divertor effects (e.g. a reduced connection length with negative lower triangularity) do not fully explain the challenges in detaching NT plasmas. Langmuir probe measurements of the target heat flux widths ($λ_q$) were constant to within 30% across an upper triangularity scan, while the spreading factor $S$ was lower by up to 50% for NT, indicating a generally lower integral Scrape-Off Layer width, $λ_{int}$. The line-averaged core density was typically higher for NT discharges for a given fuelling rate, possibly linked to higher particle confinement in NT. Conversely, the divertor neutral pressure and integrated particle fluxes to the targets were typically lower for the same line-averaged density, indicating that NT configurations may be closer to the sheath-limited regime than their PT counterparts, which may explain why NT is more challenging to detach. △ Less

Submitted 23 January, 2024; v1 submitted 18 October, 2023; originally announced October 2023.

Towards practical reinforcement learning for tokamak magnetic control

Authors: Brendan D. Tracey, Andrea Michi, Yuri Chervonyi, Ian Davies, Cosmin Paduraru, Nevena Lazic, Federico Felici, Timo Ewalds, Craig Donner, Cristian Galperti, Jonas Buchli, Michael Neunert, Andrea Huber, Jonathan Evens, Paula Kurylowicz, Daniel J. Mankowitz, Martin Riedmiller, The TCV Team

Abstract: Reinforcement learning (RL) has shown promising results for real-time control systems, including the domain of plasma magnetic control. However, there are still significant drawbacks compared to traditional feedback control approaches for magnetic confinement. In this work, we address key drawbacks of the RL method; achieving higher control accuracy for desired plasma properties, reducing the stea… ▽ More Reinforcement learning (RL) has shown promising results for real-time control systems, including the domain of plasma magnetic control. However, there are still significant drawbacks compared to traditional feedback control approaches for magnetic confinement. In this work, we address key drawbacks of the RL method; achieving higher control accuracy for desired plasma properties, reducing the steady-state error, and decreasing the required time to learn new tasks. We build on top of \cite{degrave2022magnetic}, and present algorithmic improvements to the agent architecture and training procedure. We present simulation results that show up to 65\% improvement in shape accuracy, achieve substantial reduction in the long-term bias of the plasma current, and additionally reduce the training time required to learn new tasks by a factor of 3 or more. We present new experiments using the upgraded RL-based controllers on the TCV tokamak, which validate the simulation results achieved, and point the way towards routinely achieving accurate discharges using the RL approach. △ Less

Submitted 5 October, 2023; v1 submitted 21 July, 2023; originally announced July 2023.

Parallel flows as a key component to interpret Super-X divertor experiments

Authors: M. Carpita, O. Février, H. Reimerdes, C. Theiler, B. P. Duval, C. Colandrea, G. Durr-Legoupil-Nicoud, D. Galassi, S. Gorno, E. Huett, J. Loizu, L. Martinelli, A. Perek, L. Simons, G. Sun, E. Tonello, C. Wüthrich, the TCV team

Abstract: The Super-X Divertor (SXD) is an alternative divertor configuration leveraging total flux expansion at the Outer Strike Point (OSP). While the extended 2-Point Model (2PM) predicts facilitated detachment access and control in the SXD configuration, these attractive features are not always retrieved experimentally. These discrepancies are at least partially explained by the effect of parallel flows… ▽ More The Super-X Divertor (SXD) is an alternative divertor configuration leveraging total flux expansion at the Outer Strike Point (OSP). While the extended 2-Point Model (2PM) predicts facilitated detachment access and control in the SXD configuration, these attractive features are not always retrieved experimentally. These discrepancies are at least partially explained by the effect of parallel flows which, when self-consistently included in the 2PM, reveal the role of total flux expansion on the pressure balance and weaken the total flux expansion effect on detachment access and control, compared to the original predictions. This new model can partially explain the discrepancies between the 2PM and experiments performed on tokamak à configuration variable (TCV), in ohmic L-mode scenarios, which are particularly apparent when scanning the OSP major radius Rt. In core density ramps in lower Single-Null (SN) configuration, the impact of Rt on the CIII emission front movement in the divertor outer leg - used as a proxy for the plasma temperature in the divertor - is substantially weaker than 2PM predictions. Furthermore, in OSP radial sweeps in lower and upper SN configurations, in ohmic L-mode scenarios with a constant core density, the peak parallel particle flux density at the OSP is almost independent of Rt, while the 2PM predicts a linear dependence. Finally, analytical and numerical modeling of parallel flows in the divertor is presented. It is shown that an increase in total flux expansion can favour supersonic flows at the OSP. Parallel flows are also shown to be relevant by analysing SOLPS-ITER simulations of TCV. △ Less

Submitted 27 February, 2024; v1 submitted 30 June, 2023; originally announced June 2023.

Comments: This version of the paper is outdated. The most recent, and published, version of the paper can be found at the corresponding Journal / DOI reference

Journal ref: Nucl. Fusion 64 046019 (2024)

Initial Fulcher band observations from high resolution spectroscopy in the MAST-U divertor

Authors: N. Osborne, K. Verhaegh, M. D. Bowden, T. Wijkamp, N. Lonigro, P. Ryan, E. Pawelec, B. Lipschultz, V. Soukhanovskii, T. van den Biggelaar, the MAST-U team

Abstract: High resolution Fulcher band spectroscopy was used in the MAST-U divertors during Super-X and elongated conventional divertor density ramps with $\text{D}_{2}$ fuelling from the mid-plane high-field side. In the Super-X case (density ramp from Greenwald fraction 0.12 to 0.24), the upper divertor showed ground state rotational temperatures of the $\text{D}_{2}$ molecules increasing from $\sim$6000… ▽ More High resolution Fulcher band spectroscopy was used in the MAST-U divertors during Super-X and elongated conventional divertor density ramps with $\text{D}_{2}$ fuelling from the mid-plane high-field side. In the Super-X case (density ramp from Greenwald fraction 0.12 to 0.24), the upper divertor showed ground state rotational temperatures of the $\text{D}_{2}$ molecules increasing from $\sim$6000 K, starting at the detachment onset, to $\sim$9000 K during deepening detachment. This was correlated with the movement of the Fulcher emission region, which is correlated with the ionisation source. The increase in rotational temperature did not occur near the divertor entrance, where the plasma was still ionising. Qualitative agreement was obtained between the lower and upper divertor. Similar rotational temperatures were obtained in the elongated divertor before the detachment onset, although the increase in rotational temperature during detachment was less clearly observed as less deep detachment was obtained. %In the elongated conventional divertor there was some qualitative agreement of this effect impeded by low signal. The measured vibrational distribution of the upper Fulcher state (first four bands) does not agree with a ground state Boltzmann distribution but shows a different characteristic with an elevated population especially in the $ν= 2$ and $ν= 3$ bands. The populations of the $ν= 2$ and $ν= 3$ band relative to the $ν= 0$ band are roughly proportional to the $\textit{rotational}$ temperature. △ Less

Submitted 25 July, 2023; v1 submitted 29 June, 2023; originally announced June 2023.

Intermittency of density fluctuations and zonal-flow generation in MAST edge plasmas

Authors: A. Sladkomedova, I. Cziegler, A. R. Field, A. A. Schekochihin, D. Dunai, P. G. Ivanov, the MAST-U Team, the EUROfusion MST1 Team

Abstract: The properties of the edge ion-scale turbulence are studied using the beam emission spectroscopy (BES) diagnostic on MAST. Evidence of the formation of large-scale high-amplitude coherent structures, filamentary density blobs and holes, 2$-$4 cm inside the plasma separatrix is presented. Measurements of radial velocity and skewness of the density fluctuations indicate that density holes propagate… ▽ More The properties of the edge ion-scale turbulence are studied using the beam emission spectroscopy (BES) diagnostic on MAST. Evidence of the formation of large-scale high-amplitude coherent structures, filamentary density blobs and holes, 2$-$4 cm inside the plasma separatrix is presented. Measurements of radial velocity and skewness of the density fluctuations indicate that density holes propagate radially inwards, with the skewness profile peaking at 7$-$10 cm inside the separatrix. Poloidal velocities of the density fluctuations measured using cross-correlation time delay estimation (CCTDE) are found to exhibit an intermittent behaviour. Zonal-flow analysis reveals the presence of poloidally symmetric coherent oscillations $-$ low-frequency (LF) zonal flows and geodesic acoustic modes (GAM). Shearing rates of the observed zonal flows are found to be comparable to the turbulence decorrelation rate. The observed bursts in density-fluctuation power are followed by quiescent periods with a transient increase in the power of sheared flows. Three-wave interactions between broadband turbulence and a GAM are illustrated using the autobispectral technique. It is shown that the zonal flows and the density-fluctuation field are nonlinearly coupled and LF zonal flows mediate the energy transfer from high- to low-frequency density fluctuations. △ Less

Submitted 21 December, 2023; v1 submitted 11 June, 2023; originally announced June 2023.

Accelerated Bayesian inference of plasma profiles with self-consistent MHD equilibria at W7-X via neural networks

Authors: Andrea Merlo, Andrea Pavone, Daniel Böckenhoff, Ekkehard Pasch, Golo Fuchert, Kai Jakob Brunner, Kian Rahbarnia, Jonathan Schilling, Udo Höfel, Sehyun Kwak, Jakob Svensson, Thomas Sunn Pedersen, the W7-X team

Abstract: High-$\langle β\rangle$ operations require a fast and robust inference of plasma parameters with a self-consistent MHD equilibrium. Precalculated MHD equilibria are usually employed at W7-X due to the high computational cost. To address this, we couple a physics-regularized NN model that approximates the ideal-MHD equilibrium with the Bayesian modeling framework Minerva. We show the fast and robus… ▽ More High-$\langle β\rangle$ operations require a fast and robust inference of plasma parameters with a self-consistent MHD equilibrium. Precalculated MHD equilibria are usually employed at W7-X due to the high computational cost. To address this, we couple a physics-regularized NN model that approximates the ideal-MHD equilibrium with the Bayesian modeling framework Minerva. We show the fast and robust inference of plasma profiles (electron temperature and density) with a self-consistent MHD equilibrium approximated by the NN model. We investigate the robustness of the inference across diverse synthetic W7-X plasma scenarios. The inferred plasma parameters and their uncertainties are compatible with the parameters inferred using the VMEC, and the inference time is reduced by more than two orders of magnitude. This work suggests that MHD self-consistent inferences of plasma parameters can be performed between shots. △ Less

Submitted 22 May, 2023; originally announced May 2023.

Comments: 18 pages, 6 figures

Validation of the plasma-wall self-organization model for density limit in ECRH-assisted start-up of Ohmic discharges on J-TEXT

Authors: Jiaxing Liu, ** Zhu, Dominique Franck Escande, Junli Zhang, Donghui Xia, Yuhan Wang, Jiaming Wang, Qinghu Yang, Jiangang Fang, Li Gao, Zhifeng Cheng, Zhipeng Chen, Zhoujun Yang, Zhongyong Chen, Yonghua Ding, Yuan Pan, the J-TEXT team

Abstract: A recently developed plasma-wall self-organization (PWSO) model predicts a significantly enhanced density limit, which may be attainable in tokamaks with ECRH-assisted ohmic startup and sufficiently high initial neutral density. Experiments have been conducted on J-TEXT to validate such a density limit scenario based on this model. Experimental results demonstrate that increasing the pre-filled ga… ▽ More A recently developed plasma-wall self-organization (PWSO) model predicts a significantly enhanced density limit, which may be attainable in tokamaks with ECRH-assisted ohmic startup and sufficiently high initial neutral density. Experiments have been conducted on J-TEXT to validate such a density limit scenario based on this model. Experimental results demonstrate that increasing the pre-filled gas pressure or ECRH power during the startup phase can effectively enhance plasma purity and raise the density limit at the flat-top. Despite the dominant carbon fraction in the wall material, some discharges approach the edge of the density-free regime of the 1D model of PWSO. △ Less

Submitted 17 April, 2023; originally announced April 2023.

Comments: 17 pages, 8 figures

In-situ coating of silicon-rich films on tokamak plasma-facing components with real-time Si material injection

Authors: Florian Effenberg, Shota Abe, Gregory Sinclair, Tyler Abrams, Alessandro Bortolon, William R. Wampler, Florian M. Laggner, Dmitry L. Rudakov, Igor Bykov, Charles J. Lasnier, David Mauzey, Alexander Nagy, Raffi Nazikian, Filippo Scotti, Huiqian Wang, Robert S. Wilcox, the DIII-D Team

Abstract: Experiments have been conducted in the DIII-D tokamak to explore the in-situ growth of silicon-rich layers as a potential technique for real-time replenishment of surface coatings on plasma-facing components (PFCs) during steady-state long-pulse reactor operation. Silicon (Si) pellets of 1 mm diameter were injected into low- and high-confinement (L-mode and H-mode) plasma discharges with densities… ▽ More Experiments have been conducted in the DIII-D tokamak to explore the in-situ growth of silicon-rich layers as a potential technique for real-time replenishment of surface coatings on plasma-facing components (PFCs) during steady-state long-pulse reactor operation. Silicon (Si) pellets of 1 mm diameter were injected into low- and high-confinement (L-mode and H-mode) plasma discharges with densities ranging from $3.9-7.5\times10^{19}$ m$^{-3}$ and input powers ranging from $5.5-9$ MW. The small Si pellets were delivered with the impurity granule injector (IGI) at frequencies ranging from 4-16 Hz corresponding to mass flow rates of $5-19$ mg/s ($1-4.2\times10^{20}$ Si/s) at cumulative amounts of up to 34 mg of Si per five-second discharge. Graphite samples were exposed to the scrape-off layer and private flux region plasmas through the divertor material evaluation system (DiMES) to evaluate the Si deposition on the divertor targets. The Si II emission at the sample correlates with silicon injection and suggests net surface Si-deposition in measurable amounts. Post-mortem analysis showed Si-rich coatings containing silicon oxides, of which SiO$_2$ is the dominant component. No evidence of SiC was found, which is attributed to low divertor surface temperatures. The in-situ and ex-situ analysis found that Si-rich coatings of at least $0.4-1.2$ nm thickness have been deposited at $0.4-0.7$ nm/s. The technique is estimated to coat a surface area of at least 0.94 m$^2$ on the outer divertor. These results demonstrate the potential of using real-time material injection to form Si-enriched layers on divertor PFCs during reactor operation. △ Less

Submitted 9 August, 2023; v1 submitted 8 April, 2023; originally announced April 2023.

Comments: Florian Effenberg et al 2023 Nucl. Fusion in press https://doi.org/10.1088/1741-4326/acee98

Journal ref: Nucl. Fusion 63 106004 (2023)

D-Mag: a laboratory for studying plasma physics and diagnostics in strong magnetic fields

Authors: Bartholomaeaus Jagielski, Uwe Wenzel, Thomas Sunn Pedersen, Andre Melzer, Arun Pandey, Felix Mackel, the Wendelstein 7-X team

Abstract: We have set up a diagnostic magnet (D-Mag) laboratory for a wide range of applications in plasma physics. It consists of a superconducting magnet for field strengths of up to 5.9 T. The main purpose is to provide an experimental environment for the development of plasma diagnostics for nuclear fusion studies and the investigation of dusty plasmas in strong magnetic fields. We describe in the artic… ▽ More We have set up a diagnostic magnet (D-Mag) laboratory for a wide range of applications in plasma physics. It consists of a superconducting magnet for field strengths of up to 5.9 T. The main purpose is to provide an experimental environment for the development of plasma diagnostics for nuclear fusion studies and the investigation of dusty plasmas in strong magnetic fields. We describe in the article the setup and operation of the D-Mag. Some applications are presented for the development of plasma diagnostics, such as neutral pressure gauges and Langmuir probes that have to be operated in strong magnetic fields. Among the examples is the test of the long-pulse capability and stability of the diagnostic pressure gauge (DPG) for the ITER device. △ Less

Submitted 27 March, 2023; originally announced March 2023.

Comments: Superconducting Magnet - laboratory for diagnostic development and tests in strong and variable magnetic fields of up to 6 Tesla

Complex structure of turbulence across the ASDEX Upgrade pedestal

Authors: L. A. Leppin, T. Görler, M. Cavedon, M. G. Dunne, E. Wolfrum, F. Jenko, the ASDEX Upgrade Team

Abstract: The theoretical investigation of relevant turbulent transport mechanisms in H-mode pedestals is a great scientific and numerical challenge. In this study, we address this challenge by global, nonlinear gyrokinetic simulations of a full pedestal up to the separatrix, supported by a detailed characterisation of gyrokinetic instabilities from just inside the pedestal top to pedestal centre and foot.… ▽ More The theoretical investigation of relevant turbulent transport mechanisms in H-mode pedestals is a great scientific and numerical challenge. In this study, we address this challenge by global, nonlinear gyrokinetic simulations of a full pedestal up to the separatrix, supported by a detailed characterisation of gyrokinetic instabilities from just inside the pedestal top to pedestal centre and foot. We present ASDEX Upgrade pedestal simulations using an upgraded version of the gyrokinetic, Eulerian, delta-f code GENE (genecode.org) that enables stable global simulations at experimental plasma beta values. The turbulent transport is found to exhibit a multi-channel, multi-scale character throughout the pedestal with the dominant contribution transitioning from ion scale Trapped Electron Modes (TEMs)/Micro Tearing Modes (MTMs) at the pedestal top to electron scale Electron Temperature Gradient modes (ETG) in the steep gradient region. Consequently, the turbulent electron heat flux changes from ion to electron scales and the ion heat flux reduces to almost neoclassic values in the pedestal centre. ExB shear is found to strongly reduce heat flux levels in all channels (electron, ion, electrostatic, electromagnetic) and the interplay of magnetic shear and pressure gradient is found to locally stabilise ion scale instabilities. △ Less

Submitted 19 March, 2023; originally announced March 2023.

Performance assessment of a tightly baffled, long-legged divertor configuration in TCV with SOLPS-ITER

Authors: G. Sun, H. Reimerdes, C. Theiler, B. P. Duval, M. Carpita, C. Colandrea, O. Février, the TCV team

Abstract: Numerical simulations explore the possibility to test the tightly baffled, long-legged divertor (TBLLD) concept in a future upgrade of the Tokamak à configuration variable (TCV). The SOLPS-ITER code package is used to compare the exhaust performance of several TBLLD configurations with existing unbaffled and baffled TCV configurations. The TBLLDs feature a range of radial gaps between the separatr… ▽ More Numerical simulations explore the possibility to test the tightly baffled, long-legged divertor (TBLLD) concept in a future upgrade of the Tokamak à configuration variable (TCV). The SOLPS-ITER code package is used to compare the exhaust performance of several TBLLD configurations with existing unbaffled and baffled TCV configurations. The TBLLDs feature a range of radial gaps between the separatrix and the outer leg side walls. All considered TBLLDs are predicted to lead to a denser and colder plasma in front of the targets and improve the power handling by factors of 2-3 compared to the present, baffled divertor and by up to a factor of 12 compared to the original, unbaffled configuration. The improved TBLLD performance is mainly due to a better neutral confinement with improved plasma-neutral interactions in the divertor region. Both power handling capability and neutral confinement increases when reducing the radial gap. The core compatibility of TBLLDs with nitrogen seeding is also evaluated and the detachment window with acceptable core pollution for the proposed TBLLDs is explored, showing a reduction of required upstream impurity concentration up to 18% to achieve the detachment with thinner radial gap. △ Less

Submitted 20 April, 2023; v1 submitted 16 March, 2023; originally announced March 2023.

Revealing the dynamics of magnetosphere, atmosphere, and interior of solar system objects with the Square Kilometre Array

Authors: Tomoki Kimura, Yuka Fujii, Hajime Kita, Fuminori Tsuchiya, Hideo Sagawa, the SKA-Japan Planetary Science Team

Abstract: Bodies such as planets, moons, and asteroids in our solar system are the brightest objects in the low-frequency radio astronomy at $\lesssim$ 10 GHz. The low-frequency radio emissions from our solar system bodies exhibit various observed characteristics in the spectrum, polarization, periodicity, and flux. The observed characteristics are essential probes for explorations of the bodies' magnetosph… ▽ More Bodies such as planets, moons, and asteroids in our solar system are the brightest objects in the low-frequency radio astronomy at $\lesssim$ 10 GHz. The low-frequency radio emissions from our solar system bodies exhibit various observed characteristics in the spectrum, polarization, periodicity, and flux. The observed characteristics are essential probes for explorations of the bodies' magnetosphere, atmosphere, surface, and even their interior. Generation and propagation theories of the radio emissions associate the characteristics with fundamental physics embedded in the environments: e.g., auroral electron acceleration, betatron acceleration, and atmospheric momentum transfer. Here we review previous studies on the low-frequency radio emissions from our solar system bodies to unveil some outstanding key questions on the dynamics and evolution of the bodies. To address the key questions by the future observations with the Square Kilometre Array (SKA), we made feasibility studies for detection and imaging of the radio emissions. Possible extensions of the solar system observations with SKA to the exoplanets are also proposed in the summary. △ Less

Submitted 13 March, 2023; originally announced March 2023.

Probing non-linear MHD stability of the EDA H-mode in ASDEX Upgrade

Authors: A Cathey, M Hoelzl, L Gil, MG Dunne, GF Harrer, GTA Huijsmans, J Kalis, K Lackner, SJP Pamela, E Wolfrum, S Günter, the JOREK team, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: Regimes of operation in tokamaks that are devoid of large ELMs have to be better understood to extrapolate their applicability to reactor-relevant devices. This paper describes non-linear extended MHD simulations that use an experimental equilibrium from an EDA H-mode in ASDEX Upgrade. Linear ideal MHD analysis indicates that the operational point lies slightly inside of the stable region. The non… ▽ More Regimes of operation in tokamaks that are devoid of large ELMs have to be better understood to extrapolate their applicability to reactor-relevant devices. This paper describes non-linear extended MHD simulations that use an experimental equilibrium from an EDA H-mode in ASDEX Upgrade. Linear ideal MHD analysis indicates that the operational point lies slightly inside of the stable region. The non-linear simulations with the visco-resistive extended MHD code, JOREK, sustain non-axisymmetric perturbations that are linearly most unstable with toroidal mode numbers of n = \{6 \dots 9\}, but non-linearly higher and lower n become driven and the low-n become dominant. The poloidal mode velocity during the linear phase is found to correspond to the expected velocity for resistive ballooning modes. The perturbations that exist in the simulations have somewhat smaller poloidal wavenumbers (k_θ \sim 0.1 to 0.5 cm^{-1} ) than the experimental expectations for the quasi-coherent mode in EDA, and cause non-negligible transport in both the heat and particle channels. In the transition from linear to non-linear phase, the mode frequency chirps down from approximately 35 kHz to 13 kHz, which corresponds approximately to the lower end of frequencies that are typically observed in EDA H-modes in ASDEX Upgrade. △ Less

Submitted 22 January, 2023; originally announced January 2023.

SOLPS-ITER numerical evaluation about the effect of drifts in a divertor configuration of ASDEX-Upgrade and a limiter configuration of J-TEXT

Authors: H. Wu, P. Shi, F. Subba, H. Sun, M. Wischmeier, R. Zanino, the ASDEX Upgrade Team

Abstract: The High Field High Density Region (HFSFD) has been experimentally observed in both divertor and limiter tokamak devices. In order to numerically reproduced the HFSHD region in the limiter tokamak device J-TEXT, we first performed SOLPS-ITER simulations on the J-TEXT limiter tokamak with the activation of drifts, which is associated with the HFSHD region. The validated physical models, which is fr… ▽ More The High Field High Density Region (HFSFD) has been experimentally observed in both divertor and limiter tokamak devices. In order to numerically reproduced the HFSHD region in the limiter tokamak device J-TEXT, we first performed SOLPS-ITER simulations on the J-TEXT limiter tokamak with the activation of drifts, which is associated with the HFSHD region. The validated physical models, which is from ASDEX Upgrade (AUG) divertor modelling including full drifts and currents, were applied. Through a gas puffing rate scan, both attached and detached regimes were numerically obtained in the AUG divertor and J-TEXT limiter. The key plasma parameters in the J-TEXT limiter are evaluated with and without drifts that have a qualitative performance like AUG except the roll-overment of the total ion flux at the targets. The drift effects on the target profiles are investigated in which the maximum electron temperature at the outer targets is 15eV and 5eV respectively. When the outer targets are attached in the J-TEXT limiter and AUG divertor, the drifts result in the partial detachment of the inner targets. In the detached regimes, the drifts decrease the electron temperature on AUG divertor targets. However, for the J-TEXT limiter, the electron temperature only decreases at the far SOL region. The effect of drifts on the neutral density is also presented. △ Less

Submitted 11 January, 2023; originally announced January 2023.

Validating neutral-beam current drive simulations in the TJ-II stellarator

Authors: Sadig Mulas, Álvaro Cappa, José Martínez-Fernández, Daniel López-Bruna, José Luis Velasco, Teresa Estrada, Jesús Manuel Gómez-Manchón, Macarena Liniers, Ignacio Pastor, Francisco Medina, Enrique Ascasíbar, TJ-II Team

Abstract: In this paper, we analyze the results of neutral-beam current drive (NBCD) experiments, performed in the TJ-II stellarator, with the aim of validating the theoretical predictions. Both parallel and anti-parallel injection with respect to the magnetic field were explored using co (NBI1) and counter (NBI2) beams at different injected beam power and plasma densities. The fast-ion current driven by bo… ▽ More In this paper, we analyze the results of neutral-beam current drive (NBCD) experiments, performed in the TJ-II stellarator, with the aim of validating the theoretical predictions. Both parallel and anti-parallel injection with respect to the magnetic field were explored using co (NBI1) and counter (NBI2) beams at different injected beam power and plasma densities. The fast-ion current driven by both beams was simulated with the Monte Carlo code ASCOT and the electron response to the fast-ion current was calculated analytically using a model valid for an arbitrary magnetic configuration and a low collisionality plasma. The model reproduces with rather good agreement the toroidal current measured in NBI2 plasmas while the current driven by NBI1 is less than half the predicted one. Possible reasons for this discrepancy are discussed. △ Less

Submitted 13 April, 2023; v1 submitted 9 January, 2023; originally announced January 2023.

Physics-regularized neural network of the ideal-MHD solution operator in Wendelstein 7-X configurations

Authors: Andrea Merlo, Daniel Böckenhoff, Jonathan Schilling, Samuel Aaron Lazerson, Thomas Sunn Pedersen, the W7-X team

Abstract: The computational cost of constructing 3D magnetohydrodynamic (MHD) equilibria is one of the limiting factors in stellarator research and design. Although data-driven approaches have been proposed to provide fast 3D MHD equilibria, the accuracy with which equilibrium properties are reconstructed is unknown. In this work, we describe an artificial neural network (NN) that quickly approximates the i… ▽ More The computational cost of constructing 3D magnetohydrodynamic (MHD) equilibria is one of the limiting factors in stellarator research and design. Although data-driven approaches have been proposed to provide fast 3D MHD equilibria, the accuracy with which equilibrium properties are reconstructed is unknown. In this work, we describe an artificial neural network (NN) that quickly approximates the ideal-MHD solution operator in Wendelstein 7-X (W7-X) configurations. This model fulfils equilibrium symmetries by construction. The MHD force residual regularizes the solution of the NN to satisfy the ideal-MHD equations. The model predicts the equilibrium solution with high accuracy, and it faithfully reconstructs global equilibrium quantities and proxy functions used in stellarator optimization. We also optimize W7-X magnetic configurations, where desiderable configurations can be found in terms of fast particle confinement. This work demonstrates with which accuracy NN models can approximate the 3D ideal-MHD solution operator and reconstruct equilibrium properties of interest, and it suggests how they might be used to optimize stellarator magnetic configurations. △ Less

Submitted 11 April, 2023; v1 submitted 15 November, 2022; originally announced November 2022.

Comments: 47 pages, 28 figures, published in Nuclear Fusion

On the interaction between the island divertor heat fluxes, the scrape-off layer radial electric field and the edge turbulence in Wendelstein 7-X plasmas

Authors: E. Maragkoudakis, D. Carralero, T. Estrada, T. Windisch, Y. Gao, C. Killer, M. Jakubowski, A. Puig Sitjes, F. Pisano, H. Sándor, M. Vecsei, S. Zoletnik, A. Cappa, the Wendelstein 7-X team

Abstract: The formation of the radial electric field, $E_{\rm r}$ in the SOL has been experimentally studied for attached divertor conditions in stellarator W7-X. The main objective of this study is to test the validity in a complex 3D island divertor of simple models, typically developed in tokamaks, relating $E_{\rm r}$ to the sheath potential drop gradient at the target. Additionally, we investigate the… ▽ More The formation of the radial electric field, $E_{\rm r}$ in the SOL has been experimentally studied for attached divertor conditions in stellarator W7-X. The main objective of this study is to test the validity in a complex 3D island divertor of simple models, typically developed in tokamaks, relating $E_{\rm r}$ to the sheath potential drop gradient at the target. Additionally, we investigate the effect of the edge $E_{\rm r}$ shear on the reduction of density fluctuation amplitude, a well-established phenomenon according to the existing bibliography. The main diagnostic for measurements in the SOL is a V-band Doppler reflectometer that can provide the measurement of the $E_{\rm r}$ and density fluctuations with good spatial resolution. Three-dimensional measurements of divertor parameters has been carried out using infrared cameras, with $λ_{\rm q}$ resulting a suitable proxy for the model-relevant $λ_{\rm T}$. In the investigated attached regimes, it is shown for the first time that the formation of the $E_{\rm r}$ in the SOL depends on parameters at the divertor, following a $E_{\rm r} \propto T_{\rm e} /λ_q$ qualitatively similar to that found in a tokamak. Then, from the analyzed plasmas, the observed $E_{\rm r}$ shear at the edge is linked to a moderate local reduction of the amplitude of density fluctuations. △ Less

Submitted 5 October, 2022; originally announced October 2022.

Prevention of core particle depletion in stellarators by turbulence

Authors: H. Thienpondt, J. M. García-Regaña, I. Calvo, J. A. Alonso, J. L. Velasco, A. González-Jerez, M. Barnes, K. Brunner, O. Ford, G. Fuchert, J. Knauer, E. Pasch, L. Vanó, the Wendelstein 7-X team

Abstract: In reactor-relevant plasmas, neoclassical transport drives an outward particle flux in the core of large stellarators and predicts strongly hollow density profiles. However, this theoretical prediction is contradicted by experiments. In particular, in Wendelstein 7-X, the first large optimized stellarator, flat or weakly peaked density profiles are generally measured, indicating that neoclassical… ▽ More In reactor-relevant plasmas, neoclassical transport drives an outward particle flux in the core of large stellarators and predicts strongly hollow density profiles. However, this theoretical prediction is contradicted by experiments. In particular, in Wendelstein 7-X, the first large optimized stellarator, flat or weakly peaked density profiles are generally measured, indicating that neoclassical theory is not sufficient and that an inward contribution to the particle flux is missing in the core. In this Research Letter, it is shown that the turbulent contribution to the particle flux can explain the difference between experimental measurements and neoclassical predictions. The results of this Research Letter also prove that theoretical and numerical tools are approaching the level of maturity needed for the prediction of equilibrium density profiles in stellarator plasmas, which is a fundamental requirement for the design of operation scenarios of present devices and future reactors. △ Less

Submitted 8 November, 2023; v1 submitted 9 September, 2022; originally announced September 2022.

Comments: 8 pages, 6 figures, updated the title and incorporated the appendix into the main letter

Journal ref: Physical Review Research 5 (2023) L022053

Mesoscopic transport in KSTAR plasmas: avalanches and the $E \times B$ staircase

Authors: Minjun J. Choi, Jae-Min Kwon, Lei Qi, P. H. Diamond, T. S. Hahm, Hogun Jhang, Juhyung Kim, Michael Leconte, Hyun-Seok Kim, Jisung Kang, Byoung-Ho Park, **il Chung, Jaehyun Lee, Minho Kim, Gunsu S. Yun, Y. U. Nam, Jaewook Kim, Won-Ha Ko, K. D. Lee, J. W. Juhn, the KSTAR team

Abstract: The self-organization is one of the most interesting phenomena in the non-equilibrium complex system, generating ordered structures of different sizes and durations. In tokamak plasmas, various self-organized phenomena have been reported, and two of them, coexisting in the near-marginal (interaction dominant) regime, are avalanches and the $E \times B$ staircase. Avalanches mean the ballistic flux… ▽ More The self-organization is one of the most interesting phenomena in the non-equilibrium complex system, generating ordered structures of different sizes and durations. In tokamak plasmas, various self-organized phenomena have been reported, and two of them, coexisting in the near-marginal (interaction dominant) regime, are avalanches and the $E \times B$ staircase. Avalanches mean the ballistic flux propagation event through successive interactions as it propagates, and the $E \times B$ staircase means a globally ordered pattern of self-organized zonal flow layers. Various models have been suggested to understand their characteristics and relation, but experimental researches have been mostly limited to the demonstration of their existence. Here we report detailed analyses of their dynamics and statistics and explain their relation. Avalanches influence the formation and the width distribution of the $E \times B$ staircase, while the $E \times B$ staircase confines avalanches within its mesoscopic width until dissipated or penetrated. Our perspective to consider them the self-organization phenomena enhances our fundamental understanding of them as well as links our findings with the self-organization of mesoscopic structures in various complex systems. △ Less

Submitted 20 February, 2024; v1 submitted 13 July, 2022; originally announced July 2022.

Experimental scaling of the scrape-off layer particle flux width by outboard divertor Langmuir probes with favorable Bt configuration on EAST

Authors: X. Liu, L. Y. Meng, J. C. Xu, L. Wang, J. Li, the EAST Team

Abstract: The scrape-off layer (SOL) power width (λ_q) is important for predicting the heat load on divertor targets for future magnetically confined devices. Currently, the underlying physics for λ_q scaling is not fully understood. This paper extends the previous inboard SOL particle flux width (λ_{js}) scaling [Liu et al 2019 Plasma Phys. Control. Fusion 61 045001] to the outboard side in EAST, which can… ▽ More The scrape-off layer (SOL) power width (λ_q) is important for predicting the heat load on divertor targets for future magnetically confined devices. Currently, the underlying physics for λ_q scaling is not fully understood. This paper extends the previous inboard SOL particle flux width (λ_{js}) scaling [Liu et al 2019 Plasma Phys. Control. Fusion 61 045001] to the outboard side in EAST, which can provide more experimental evidence for λ_q study. A systematic method has been developed to correct the less reliable upper outer (UO) divertor Langmuir probe (Div-LP) measurements with their more reliable neighboring measurements to reduce the measurement uncertainty of λ_js. For the discharges with the favorable Bt and upper single null configurations in the 2019 experiment campaign, about 260 discharges have been selected by certain criteria to ensure good λ_js measurements. Three H-mode, L-mode, and Ohmic databases have been constructed and are used for λ_js scalings. It is found that the outboard λ_js for the H-mode and L-mode plasmas scales as, λ_(js,UO)=1.52(W_{MHD}/n_e)^(-0.61) P_{tot}^0.19, where W_{MHD} is the stored energy, n_e is the line-averaged density, and P_{tot} is the total input power. This scaling is similar to the inboard λ_js scaling except for the scaling amplitude that is probably due the triangularity. The repeatable scaling dependence on W_{MHD}/n_e confirms the reliability of this dependence even though the regression quality is relatively poor. It is also discussed that the solely scaling of λ_q/λ_{js} on Bp is not enough to include all the physics of SOL heat transports. △ Less

Submitted 16 February, 2023; v1 submitted 17 June, 2022; originally announced June 2022.

Comments: 14 pages, 7 figures, 4 tables, Nucl. Fusion (2023)

The SLAC Linac to ESA (LESA) Beamline for Dark Sector Searches and Test Beams

Authors: Tom Markiewicz, Tor Raubenheimer, Natalia Toro, members of the LESA construction team

Abstract: The Linac to End Station A (LESA) beamline is being constructed at SLAC and will provide a near-CW beam of multi-GeV electrons to the SLAC End Station A for experiments in particle physics. The 1st half of LESA is ready for commissioning at the end of FY22 and the full beamline will be operational Q1 FY24. The low-current multi-GeV electron beam is produced parasitically by the superconducting RF… ▽ More The Linac to End Station A (LESA) beamline is being constructed at SLAC and will provide a near-CW beam of multi-GeV electrons to the SLAC End Station A for experiments in particle physics. The 1st half of LESA is ready for commissioning at the end of FY22 and the full beamline will be operational Q1 FY24. The low-current multi-GeV electron beam is produced parasitically by the superconducting RF (SRF) linac for the LCLS-II/LCLS-II-HE X-ray Free Electron Laser. LESA is designed to host experiments to detect light dark matter such as the Light Dark Matter eXperiment (LDMX) as well as a wide range of other experiments and test beams requiring near-CW electron currents ranging from pA to μA. △ Less

Submitted 18 July, 2022; v1 submitted 26 May, 2022; originally announced May 2022.

Comments: contribution to Snowmass 2021

Global gyrokinetic simulations of ASDEX Upgrade up to the transport time-scale with GENE-Tango

Authors: A. Di Siena, A. Banon Navarro, T. Luda, G. Merlo, M. Bergmann, L. Leppin, T. Goerler, J. B. Parker, L. LoDestro, J. Hittinger, B. Dorland, G. Hammett, F. Jenko, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: An accurate description of turbulence up to the transport time scale is essential for predicting core plasma profiles and enabling reliable calculations for designing advanced scenarios and future devices. Here, we exploit the gap separation between turbulence and transport time scales and couple the global gyrokinetic code GENE to the transport-solver Tango, including kinetic electrons, collision… ▽ More An accurate description of turbulence up to the transport time scale is essential for predicting core plasma profiles and enabling reliable calculations for designing advanced scenarios and future devices. Here, we exploit the gap separation between turbulence and transport time scales and couple the global gyrokinetic code GENE to the transport-solver Tango, including kinetic electrons, collisions, realistic geometries, toroidal rotation and electromagnetic effects for the first time. This approach overcomes gyrokinetic codes' limitations and enables high-fidelity profile calculations in experimentally relevant plasma conditions, significantly reducing the computational cost. We present numerical results of GENE-Tango for two ASDEX Upgrade discharges, one of which exhibits a pronounced peaking of the ion temperature profile not reproduced by TGLF-ASTRA. We show that GENE-Tango can correctly capture the ion temperature peaking observed in the experiment. By retaining different physical effects in the GENE simulations, e.g., collisions, toroidal rotation and electromagnetic effects, we demonstrate that the ion temperature profile's peaking is due to electromagnetic effects of submarginal MHD instability. Based on these results, the expected GENE-Tango speedup for the ITER standard scenario is larger than two orders of magnitude compared to a single gyrokinetic simulation up to the transport time scale, possibly making first-principles ITER simulations feasible on current computing resources. △ Less

Submitted 12 April, 2022; originally announced April 2022.

Spectroscopic investigations of detachment on the MAST Upgrade Super-X divertor

Authors: Kevin Verhaegh, Bruce Lipschultz, James Harrison, Nick Osborne, Aelwyn Williams, Peter Ryan, James Clark, Fabio Federici, Bob Kool, Tijs Wijkamp, Alexandre Fil, David Moulton, Omkar Myatra, Andrew Thornton, Thomas Bosman, Geof Cunningham, Basil Duval, Stuart Henderson, Rory Scannell, the MAST Upgrade team

Abstract: We present the first analysis of the atomic and molecular processes at play during detachment in the MAST-U Super-X divertor using divertor spectroscopy data. Our analysis indicates detachment in the MAST-U Super-X divertor can be separated into four sequential phases: First, the ionisation region detaches from the target at detachment onset leaving a region of increased molecular densities downst… ▽ More We present the first analysis of the atomic and molecular processes at play during detachment in the MAST-U Super-X divertor using divertor spectroscopy data. Our analysis indicates detachment in the MAST-U Super-X divertor can be separated into four sequential phases: First, the ionisation region detaches from the target at detachment onset leaving a region of increased molecular densities downstream. The plasma interacts with these molecules, resulting in molecular ions ($D_2^+$ and/or $D_2^- \rightarrow D + D^-$) that further react with the plasma leading to Molecular Activated Recombination and Dissociation (MAR and MAD), which results in excited atoms and significant Balmer line emission. Second, the MAR region detaches from the target leaving a sub-eV temperature region downstream. Third, an onset of strong emission from electron-ion recombination (EIR) ensues. Finally, the electron density decays near the target, resulting in a density front moving upstream. The analysis in this paper indicates that plasma-molecule interactions have a larger impact than previously reported and play a critical role in the intensity and interpretation of hydrogen atomic line emission characteristics on MAST-U. Furthermore, we find that the Fulcher band emission profile in the divertor can be used as a proxy for the ionisation region and may also be employed as a plasma temperature diagnostic for improving the separation of hydrogenic emission arising from electron-impact excitation and that from plasma-molecular interactions. We provide evidences for the presence of low electron temperatures ($<0.5$ eV) during detachment phases III-IV based on quantitative spectroscopy analysis, a Boltzmann relation of the high-n Balmer line transitions together with an analysis of the brightness of high-n Balmer lines. △ Less

Submitted 18 October, 2022; v1 submitted 5 April, 2022; originally announced April 2022.

Mitigation of plasma-wall interactions with low-Z powders in DIII-D high confinement plasmas

Authors: Florian Effenberg, Alessandro Bortolon, Livia Casali, Raffi Nazikian, Igor Bykov, Filippo Scotti, Huiqian Q. Wang, Max E. Fenstermacher, Robert Lunsford, Alexander Nagy, Brian A. Grierson, Florian M. Laggner, Rajesh Maingi, the DIII-D Team

Abstract: Experiments with low-Z powder injection in DIII-D high confinement discharges demonstrated increased divertor dissipation and detachment while maintaining good core energy confinement. Lithium (Li), boron (B), and boron nitride (BN) powders were injected in high-confinement mode plasmas ($I_p=$1 MA, $B_t=$2 T, $P_{NB}=$6 MW, $\langle n_e\rangle=3.6-5.0\cdot10^{19}$ m$^{-3}$) into the upper small-a… ▽ More Experiments with low-Z powder injection in DIII-D high confinement discharges demonstrated increased divertor dissipation and detachment while maintaining good core energy confinement. Lithium (Li), boron (B), and boron nitride (BN) powders were injected in high-confinement mode plasmas ($I_p=$1 MA, $B_t=$2 T, $P_{NB}=$6 MW, $\langle n_e\rangle=3.6-5.0\cdot10^{19}$ m$^{-3}$) into the upper small-angle slot (SAS) divertor for 2-s intervals at constant rates of 3-204 mg/s. The multi-species BN powders at a rate of 54 mg/s showed the most substantial increase in divertor neutral compression by more than an order of magnitude and lasting detachment with minor degradation of the stored magnetic energy $W_{mhd}$ by 5%. Rates of 204 mg/s of boron nitride powder further reduce ELM-fluxes on the divertor but also cause a drop in confinement performance by 24% due to the onset of an $n=2$ tearing mode. The application of powders also showed a substantial improvement of wall conditions manifesting in reduced wall fueling source and intrinsic carbon and oxygen content in response to the cumulative injection of non-recycling materials. The results suggest that low-Z powder injection, including mixed element compounds, is a promising new core-edge compatible technique that simultaneously enables divertor detachment and improves wall conditions during high confinement operation. △ Less

Submitted 16 August, 2022; v1 submitted 28 March, 2022; originally announced March 2022.

Comments: F. Effenberg et al 2022 Nucl. Fusion in press https://doi.org/10.1088/1741-4326/ac899d

Journal ref: Nucl. Fusion 62 106015 (2022)

Design and simulation of an Imaging Neutral Particle Analyzer for the ASDEX Upgrade tokamak

Authors: J. Rueda-Rueda, M. Garcia-Munoz, E. Viezzer, P. A. Schneider, J. Garcia-Dominguez, J. Ayllon-Guerola, J. Galdon-Quiroga, A. Herrmann, X. Du, M. A. Van Zeeland, P. Oyola, M. Rodriguez-Ramos, the ASDEX-Upgrade team

Abstract: An Imaging Neutral Particle Analyser (INPA) diagnostic has been designed for the ASDEX Upgrade (AUG) tokamak. The AUG INPA diagnostic will measure fast neutrals esca** the plasma after CX reactions. The neutrals will be ionised by a 20 nm carbon foil and deflected towards a scintillator by the local magnetic field. The use of a neutral beam injector (NBI) as active source of neutrals will provid… ▽ More An Imaging Neutral Particle Analyser (INPA) diagnostic has been designed for the ASDEX Upgrade (AUG) tokamak. The AUG INPA diagnostic will measure fast neutrals esca** the plasma after CX reactions. The neutrals will be ionised by a 20 nm carbon foil and deflected towards a scintillator by the local magnetic field. The use of a neutral beam injector (NBI) as active source of neutrals will provide radially resolved measurements while the use of a scintillator as active component will allow us to cover the whole plasma along the NBI line with unprecedented phase-space resolution ($ < $ 12 keV and 8 cm) and fast temporal response (up to 1 kHz with the high resolution acquisition system and above 100 kHz with the low resolution one); making it suitable to study localised fast-ions redistributions in phase-space. △ Less

Submitted 24 March, 2022; originally announced March 2022.

Implementation of synthetic fast-ion loss detector and imaging heavy ion beam probe diagnostics in the 3D hybrid kinetic-MHD code MEGA

Authors: P. Oyola, J. Gonzalez-Martin, M. Garcia-Munoz, J. Galdon-Quiroga, G. Birkenmeier, E. Viezzer, J. Dominguez-Palacios, J. Rueda-Rueda, J. F. Rivero-Rodriguez, Y. Todo, the ASDEX Upgrade team

Abstract: A synthetic Fast-Ion Loss Detector (FILD) and an imaging Heavy Ion Beam Probe (i-HIBP) have been implemented in the 3D hybrid kinetic-magnetohydrodynamic code MEGA. First synthetic measurements from these two diagnostics have been obtained for neutral beam injection (NBI) driven Alfvén Eigenmode (AE) simulated with MEGA. The synthetic fast-ion losses show a strong correlation with the AE amplitude… ▽ More A synthetic Fast-Ion Loss Detector (FILD) and an imaging Heavy Ion Beam Probe (i-HIBP) have been implemented in the 3D hybrid kinetic-magnetohydrodynamic code MEGA. First synthetic measurements from these two diagnostics have been obtained for neutral beam injection (NBI) driven Alfvén Eigenmode (AE) simulated with MEGA. The synthetic fast-ion losses show a strong correlation with the AE amplitude. This correlation is observed in the phase-space, represented in coordinates toroidal canonical momentum and energy. Fast-ion losses and the energy exchange diagrams of the confined population are connected with lines of constant E' , a linear combination of E and Pφ . First i-HIBP synthetic signals also have been computed for the simulated AE, showing displacements in the strikeline of the order of around 1 mm, above the expected resolution in the i-HIBP scintillator of approximately 100 μm. △ Less

Submitted 23 March, 2022; originally announced March 2022.

Journal ref: Review of Scientific Instruments 92, 043558 (2021)

Modelling of saturated external MHD instabilities in tokamaks: a comparison of 3D free boundary equilibria and nonlinear stability calculations

Authors: Rohan Ramasamy, Guillermo Bustos Ramirez, Matthias Hoelzl, Jonathan Graves, Guillermo Suárez López, Karl Lackner, Sibylle Günter, the JOREK team

Abstract: 3D free boundary equilibrium computations have recently been used to model external kinks and edge harmonic oscillations (EHOs), comparing with linear MHD stability codes, and nonlinear analytic theory [Kleiner et al, PPCF 61 084005 (2019)]. In this study, results of the VMEC equilibrium code are compared further with nonlinear reduced MHD simulations, using the JOREK code. The purpose of this inv… ▽ More 3D free boundary equilibrium computations have recently been used to model external kinks and edge harmonic oscillations (EHOs), comparing with linear MHD stability codes, and nonlinear analytic theory [Kleiner et al, PPCF 61 084005 (2019)]. In this study, results of the VMEC equilibrium code are compared further with nonlinear reduced MHD simulations, using the JOREK code. The purpose of this investigation is to understand the extent to which the modelling approaches agree, and identify the important physical effects which can modify the dynamics. For the simulated external kink, which is dominated by a single toroidal harmonic, good agreement is found when a large Lundquist number is used in the JOREK simulation, such that resistive effects are sub-dominant. Modelling EHOs where multiple toroidal harmonics are linearly unstable, the saturated perturbation observed can differ in the dominant toroidal harmonic. On the ideal timescale, a n=2 EHO is observed in JOREK, while the saturated perturbation predicted by VMEC is a n=1 mode. Extending simulations into timescales where resistive effects can play a role, similar n=1 perturbations can be found. The coupling of different linearly unstable toroidal harmonics in the JOREK simulation broadens the magnetic energy spectrum and ergodises the plasma edge region, resulting in a more localised pressure perturbation. These effects are not observed in VMEC, because closed magnetic flux surfaces are enforced. Despite the sensitivity of JOREK results on the assumed resistivity, saturated states can be found using both approaches that are in reasonable agreement, even for this more advanced case. △ Less

Submitted 3 June, 2022; v1 submitted 9 March, 2022; originally announced March 2022.

Comments: Submitted to Physics of Plasmas, with revisions from review process included