Showing 1–27 of 27 results for author: team, J

3D MHD modelling of plasmoid drift following massive material injection in a tokamak

Authors: M. Kong, E. Nardon, D. Bonfiglio, M. Hoelzl, D. Hu, the JOREK team, the EUROfusion Tokamak Exploitation Team

Abstract: Mechanisms of plasmoid drift in the presence of massive material injection are studied via 3D non-linear MHD modelling with the JOREK code, using a transient neutral source deposited on the low field side midplane of a JET H-mode plasma to clarify basic processes and compare with existing theory. The simulations confirm the important role of the propagation of shear Alfvén waves (SAWs) from both e… ▽ More Mechanisms of plasmoid drift in the presence of massive material injection are studied via 3D non-linear MHD modelling with the JOREK code, using a transient neutral source deposited on the low field side midplane of a JET H-mode plasma to clarify basic processes and compare with existing theory. The simulations confirm the important role of the propagation of shear Alfvén waves (SAWs) from both ends of the plasmoid ("SAW braking") and the development of external resistive currents along magnetic field lines ("Pégourié braking") in limiting charge separation and thus the $\mathbf{E}\times \mathbf{B}$ plasmoid drift, where $\mathbf{E}$ and $\mathbf{B}$ are the electric and magnetic fields, respectively. The drift velocity is found to be limited by the SAW braking for cases with relatively small source amplitude while the Pégourié braking is shown to be stronger with larger toroidal extent of the source, both in good agreement with existing theory. The simulations also identity the key role of the size of the $\mathbf{E}\times \mathbf{B}$ flow region on plasmoid drift and show that the saturated velocity caused by dominant SAW braking agrees well with theory when considering an effective pressure within the $\mathbf{E}\times \mathbf{B}$ flow region. The existence of SAWs in the simulations is demonstrated and the 3D picture of plasmoid drift is also discussed. △ Less

Submitted 1 July, 2024; originally announced July 2024.

Comments: To be submitted to Nuclear Fusion

Understanding Large-Scale Plasma Simulation Challenges for Fusion Energy on Supercomputers

Authors: Jeremy J. Williams, Ashish Bhole, Dylan Kierans, Matthias Hoelzl, Ihor Holod, Weikang Tang, David Tskhakaya, Stefan Costea, Leon Kos, Ales Podolnik, Jakub Hromadka, JOREK Team, Erwin Laure, Stefano Markidis

Abstract: Understanding plasma instabilities is essential for achieving sustainable fusion energy, with large-scale plasma simulations playing a crucial role in both the design and development of next-generation fusion energy devices and the modelling of industrial plasmas. To achieve sustainable fusion energy, it is essential to accurately model and predict plasma behavior under extreme conditions, requiri… ▽ More Understanding plasma instabilities is essential for achieving sustainable fusion energy, with large-scale plasma simulations playing a crucial role in both the design and development of next-generation fusion energy devices and the modelling of industrial plasmas. To achieve sustainable fusion energy, it is essential to accurately model and predict plasma behavior under extreme conditions, requiring sophisticated simulation codes capable of capturing the complex interaction between plasma dynamics, magnetic fields, and material surfaces. In this work, we conduct a comprehensive HPC analysis of two prominent plasma simulation codes, BIT1 and JOREK, to advance understanding of plasma behavior in fusion energy applications. Our focus is on evaluating JOREK's computational efficiency and scalability for simulating non-linear MHD phenomena in tokamak fusion devices. The motivation behind this work stems from the urgent need to advance our understanding of plasma instabilities in magnetically confined fusion devices. Enhancing JOREK's performance on supercomputers improves fusion plasma code predictability, enabling more accurate modelling and faster optimization of fusion designs, thereby contributing to sustainable fusion energy. In prior studies, we analysed BIT1, a massively parallel Particle-in-Cell (PIC) code for studying plasma-material interactions in fusion devices. Our investigations into BIT1's computational requirements and scalability on advanced supercomputing architectures yielded valuable insights. Through detailed profiling and performance analysis, we have identified the primary bottlenecks and implemented optimization strategies, significantly enhancing parallel performance. This previous work serves as a foundation for our present endeavours. △ Less

Submitted 29 June, 2024; originally announced July 2024.

Comments: Accepted by EPS PLASMA 2024 (50th European Physical Society Conference on Plasma Physics), prepared in the standardized EPS conference proceedings format and consists of 4 pages, which includes the main text, references, and figures

Axisymmetric predictions for mitigated and vertically unstable disruptions in ITER with runaway electrons

Authors: V. Bandaru, M. Hoelzl, F. J. Artola, M. Lehnen, JOREK team

Abstract: We present two-dimensional global simulations of mitigated and vertically unstable disruptions in ITER in the presence of runaway electrons. An elongated plasma in free-boundary equilibrium is subjected to an artificial thermal quench and current-profile flattening, followed by one or more massive material injections and RE avalanche. Scenarios of major disruptions as well as upward and downward v… ▽ More We present two-dimensional global simulations of mitigated and vertically unstable disruptions in ITER in the presence of runaway electrons. An elongated plasma in free-boundary equilibrium is subjected to an artificial thermal quench and current-profile flattening, followed by one or more massive material injections and RE avalanche. Scenarios of major disruptions as well as upward and downward vertical displacement events are considered. Results provide important insights into the effects of runaway electron formation, post thermal quench current-profile, injection quantities and timings, and impurity flushout on the overall evolution of disruption and the plasma vertical motion thereof. Interplay between the various effects offers scope for potentially beneficial runaway electron mitigation scenarios. △ Less

Submitted 14 June, 2024; originally announced June 2024.

Plasmoid drift and first wall heat deposition during ITER H-mode dual-SPIs in JOREK simulations

Authors: D. Hu, F. J. Artola, E. Nardon, M. Lehnen, M. Kong, D. Bonfiglio, M. Hoelzl, G. T. A. Huijsmans, JOREK Team

Abstract: The heat flux mitigation during the Thermal Quench (TQ) by the Shattered Pellet Injection (SPI) is one of the major elements of disruption mitigation strategy for ITER. It's efficiency greatly depends on the SPI and the target plasma, and is ultimately checked by the heat deposition on to the PFCs. To investigate this, JOREK simulations of neon-mixed dual-SPIs into ITER baseline H-mode and a "degr… ▽ More The heat flux mitigation during the Thermal Quench (TQ) by the Shattered Pellet Injection (SPI) is one of the major elements of disruption mitigation strategy for ITER. It's efficiency greatly depends on the SPI and the target plasma, and is ultimately checked by the heat deposition on to the PFCs. To investigate this, JOREK simulations of neon-mixed dual-SPIs into ITER baseline H-mode and a "degraded H-mode" with and without good injector synchronization are performed with focus on the first wall heat flux and its energy impact. It is found that low neon fraction SPIs into the baseline H-mode plasmas exhibit strong major radial plasmoid drift as the fragments arrive at the pedestal, accompanied by edge stochasticity. Significant density expulsion and outgoing heat flux occurs as a result, reducing the mitigation efficiency. Such drift motion could be mitigated by injecting higher neon fraction pellets', or by considering the pre-disruption confinement degradation, thus improving the radiation fraction. The radiation heat flux is found to peak in the vicinity of the fragment injection location in the early injection phase, while it relaxes later on due to parallel impurity transport. The overall radiation asymmetry could be significantly mitigated by good synchronization. Time integration of the local heat flux is carried out to provide its energy impact for wall heat damage assessment. For the baseline H-mode case with full pellet injection, melting of the stainless steel of the diagnostic port could occur near the injection port, which is acceptable, without any melting of the first wall tungsten tiles. For the degraded H-mode cases with quarter-pellet SPIs, which have 1/4 total volume of a full pellet, the maximum energy impact approaches the tolerable limit of the stainless steel with un-synchronized SPIs, and stays well below such limit for the perfectly synchronized ones. △ Less

Submitted 7 June, 2024; originally announced June 2024.

Neural-Parareal: Dynamically Training Neural Operators as Coarse Solvers for Time-Parallelisation of Fusion MHD Simulations

Authors: S. J. P. Pamela, N. Carey, J. Brandstetter, R. Akers, L. Zanisi, J. Buchanan, V. Gopakumar, M. Hoelzl, G. Huijsmans, K. Pentland, T. James, G. Antonucci, the JOREK Team

Abstract: The fusion research facility ITER is currently being assembled to demonstrate that fusion can be used for industrial energy production, while several other programmes across the world are also moving forward, such as EU-DEMO, CFETR, SPARC and STEP. The high engineering complexity of a tokamak makes it an extremely challenging device to optimise, and test-based optimisation would be too slow and to… ▽ More The fusion research facility ITER is currently being assembled to demonstrate that fusion can be used for industrial energy production, while several other programmes across the world are also moving forward, such as EU-DEMO, CFETR, SPARC and STEP. The high engineering complexity of a tokamak makes it an extremely challenging device to optimise, and test-based optimisation would be too slow and too costly. Instead, digital design and optimisation must be favored, which requires strongly-coupled suites of High-Performance Computing calculations. In this context, having surrogate models to provide quick estimates with uncertainty quantification is essential to explore and optimise new design options. Furthermore, these surrogates can in turn be used to accelerate simulations in the first place. This is the case of Parareal, a time-parallelisation method that can speed-up large HPC simulations, where the coarse-solver can be replaced by a surrogate. A novel framework, Neural-Parareal, is developed to integrate the training of neural operators dynamically as more data becomes available. For a given input-parameter domain, as more simulations are being run with Parareal, the large amount of data generated by the algorithm is used to train new surrogate models to be used as coarse-solvers for future Parareal simulations, leading to progressively more accurate coarse-solvers, and thus higher speed-up. It is found that such neural network surrogates can be much more effective than traditional coarse-solver in providing a speed-up with Parareal. This study is a demonstration of the convergence of HPC and AI which simply has to become common practice in the world of digital engineering design. △ Less

Submitted 2 May, 2024; originally announced May 2024.

Implementation of matrix compression in the coupling of JOREK to realistic 3D conducting wall structures

Authors: Federico Cipolletta, Nina Schwarz, Matthias Hoelzl, Salvatore Ventre, Nicola Isernia, Guglielmo Rubinacci, Alejandro Soba, Mervi Johanna Mantsinen, the JOREK Team

Abstract: JOREK is an advanced non-linear simulation code for studying MHD instabilities in magnetically confined fusion plasmas and their control and/or mitigation. A free-boundary and resistive wall extension was introduced via coupling to the STARWALL and CARIDDI codes, both able to provide dense response matrices describing the electromagnetic interactions between plasma and conducting structures. For d… ▽ More JOREK is an advanced non-linear simulation code for studying MHD instabilities in magnetically confined fusion plasmas and their control and/or mitigation. A free-boundary and resistive wall extension was introduced via coupling to the STARWALL and CARIDDI codes, both able to provide dense response matrices describing the electromagnetic interactions between plasma and conducting structures. For detailed CAD representations of the conducting structures and high resolutions for the plasma region, memory and computing time limitations restrict the possibility of simulating the ITER tokamak. In the present work, the Singular Value Decomposition provided by routines from the ScaLAPACK library has been successfully applied to compress some of the dense response matrices and thus optimize memory usage. This is demonstrated for simulations of Tearing Mode and Vertical Displacement Event instabilities. An outlook to future applications on large production cases and further extensions of the method are discussed. △ Less

Submitted 25 April, 2024; originally announced April 2024.

Comments: 19 pages, 9 figures, firstly presented at the 4th Fusion HPC Workshop in November 2023, submitted to Plasma Physics and Controlled Fusion in April 2024

Nonlinear MHD modeling of soft $β$ limits in W7-AS

Authors: Rohan Ramasamy, Ksenia Aleynikova, Nikita Nikulsin, Florian Hindenlang, Ihor Holod, Erika Strumberger, Matthias Hoelzl, the JOREK team

Abstract: An important question for the outlook of stellarator reactors is their robustness against pressure driven modes, and the underlying mechanism behind experimentally observed soft $β$ limits. Towards building a robust answer to these questions, simulation studies are presented using a recently derived reduced nonlinear MHD model. First, the initial model implementation is extended to capture fluid c… ▽ More An important question for the outlook of stellarator reactors is their robustness against pressure driven modes, and the underlying mechanism behind experimentally observed soft $β$ limits. Towards building a robust answer to these questions, simulation studies are presented using a recently derived reduced nonlinear MHD model. First, the initial model implementation is extended to capture fluid compression by including the influence of parallel flows. Linear benchmarks of a (2, 1) tearing mode in W7-AS geometry, and interchange modes in a finite $β$, net-zero current carrying stellarator with low magnetic shear are then used to demonstrate the modeling capabilities. Finally, a validation study is conducted on experimental reconstructions of finite $β$ W7-AS discharges. In agreement with past experimental analysis, it is shown that (i) the MHD activity is resistive, (ii) a soft $β$ limit is observed, when the plasma resistivity approaches the estimated experimental value, and (iii) low $n$ MHD activity is observed at intermediate $β$ values, particularly a nonlinearly dominant (2, 1) mode. The MHD activity is mild, explaining the soft $β$ limit, because the plasma volume remains separated into distinct sub-volumes in which field lines are ergodically confined. For the assumed transport parameters, the enhanced perpendicular transport along stochastic magnetic field lines can be overcome with the experimental heating power. The limitations in the current modeling are described, alongside an outlook for characterising soft $β$ limits in more detail in future work. △ Less

Submitted 5 February, 2024; originally announced February 2024.

Comments: Submitted to Nuclear Fusion

Extraction of n = 0 pick-up by locked mode detectors based on neural networks in J-TEXT

Authors: Chengshuo Shen, Jianchao Li, Yonghua Ding, Jiaolong Dong, Nengchao Wang, Dongliang. Han, Feiyue Mao, Da Li, Zhipeng Chen, Zhoujun Yang, Zhongyong Chen, Yuan Pan, J-Text Team

Abstract: Measurement of locked mode (LM) is important for the physical research of Magnetohydrodynamic (MHD) instabilities and plasma disruption. The n = 0 pick-up need to be extracted and subtracted to calculate the amplitude and phase of the LM. A new method to extract this pick-up has been developed by predicting the n = 0 pick-up brn=0 by the LM detectors based on Neural Networks (NNs) in J-TEXT. An ap… ▽ More Measurement of locked mode (LM) is important for the physical research of Magnetohydrodynamic (MHD) instabilities and plasma disruption. The n = 0 pick-up need to be extracted and subtracted to calculate the amplitude and phase of the LM. A new method to extract this pick-up has been developed by predicting the n = 0 pick-up brn=0 by the LM detectors based on Neural Networks (NNs) in J-TEXT. An approach called Power Multiple Time Scale (PMTS) has been developed with outstanding regressing effect in multiple frequency ranges. Three models have been progressed based on PMTS NNs. PMTS could fit the brn=0 on the LM detectors with little errors both in time domain and frequency domain. The n>0 pick-up brn>0 generated by resonant magnetic perturbations (RMPs) can be obtained after subtracting the extracted brn=0. This new method uses only one LM instead of 4 LM detectors to extract brn=0. Therefore, the distribution of the LM detectors can also be optimized based on this new method. △ Less

Submitted 22 November, 2023; originally announced November 2023.

Comments: 7pages, 10figures

Cross-Tokamak Deployment Study of Plasma Disruption Predictors Based on Convolutional Autoencoder

Authors: Xinkun Ai, Wei Zheng, Ming Zhang, Yonghua Ding, Dalong Chen, Zhongyong Chen, Chengshuo Shen, Bihao Guo, Nengchao Wang, Zhoujun Yang, Zhipeng Chen, Yuan Pan, Biao Shen, Binjia Xiao, J-TEXT team

Abstract: In the initial stages of operation for future tokamak, facing limited data availability, deploying data-driven disruption predictors requires optimal performance with minimal use of new device data. This paper studies the issue of data utilization in data-driven disruption predictor during cross tokamak deployment. Current predictors primarily employ supervised learning methods and require a large… ▽ More In the initial stages of operation for future tokamak, facing limited data availability, deploying data-driven disruption predictors requires optimal performance with minimal use of new device data. This paper studies the issue of data utilization in data-driven disruption predictor during cross tokamak deployment. Current predictors primarily employ supervised learning methods and require a large number of disruption and non-disruption shots for training. However, the scarcity and high cost of obtaining disruption shots for future tokamaks result in imbalanced training datasets, reducing the performance of supervised learning predictors. To solve this problem, we propose the Enhanced Convolutional Autoencoder Anomaly Detection (E-CAAD) predictor. E-CAAD can be only trained by normal samples from non-disruption shots and can also be trained by disruption precursor samples when disruption shots occur. This model not only overcomes the sample imbalance in supervised learning predictors, but also overcomes the inefficient dataset utilization faced by traditional anomaly detection predictors that cannot use disruption precursor samples for training, making it more suitable for the unpredictable datasets of future tokamaks. Compared to traditional anomaly detection predictor, the E-CAAD predictor performs better in disruption prediction and is deployed faster on new devices. Additionally, we explore strategies to accelerate deployment of E-CAAD predictor on the new device by using data from existing devices. Two deployment strategies are presented: mixing data from existing devices and fine-tuning the predictor trained on existing devices. Our comparisons indicate that the data from existing device can accelerate the deployment of predictor on new device. Notably, the fine-tuning strategy yields the fastest deployment on new device among the designed strategies. △ Less

Submitted 4 January, 2024; v1 submitted 17 November, 2023; originally announced November 2023.

Comments: 19 pages, 8 figures

Plasma Surrogate Modelling using Fourier Neural Operators

Authors: Vignesh Gopakumar, Stanislas Pamela, Lorenzo Zanisi, Zongyi Li, Ander Gray, Daniel Brennand, Nitesh Bhatia, Gregory Stathopoulos, Matt Kusner, Marc Peter Deisenroth, Anima Anandkumar, JOREK Team, MAST Team

Abstract: Predicting plasma evolution within a Tokamak reactor is crucial to realizing the goal of sustainable fusion. Capabilities in forecasting the spatio-temporal evolution of plasma rapidly and accurately allow us to quickly iterate over design and control strategies on current Tokamak devices and future reactors. Modelling plasma evolution using numerical solvers is often expensive, consuming many hou… ▽ More Predicting plasma evolution within a Tokamak reactor is crucial to realizing the goal of sustainable fusion. Capabilities in forecasting the spatio-temporal evolution of plasma rapidly and accurately allow us to quickly iterate over design and control strategies on current Tokamak devices and future reactors. Modelling plasma evolution using numerical solvers is often expensive, consuming many hours on supercomputers, and hence, we need alternative inexpensive surrogate models. We demonstrate accurate predictions of plasma evolution both in simulation and experimental domains using deep learning-based surrogate modelling tools, viz., Fourier Neural Operators (FNO). We show that FNO has a speedup of six orders of magnitude over traditional solvers in predicting the plasma dynamics simulated from magnetohydrodynamic models, while maintaining a high accuracy (MSE in the normalised domain $\approx$ $10^{-5}$). Our modified version of the FNO is capable of solving multi-variable Partial Differential Equations (PDE), and can capture the dependence among the different variables in a single model. FNOs can also predict plasma evolution on real-world experimental data observed by the cameras positioned within the MAST Tokamak, i.e., cameras looking across the central solenoid and the divertor in the Tokamak. We show that FNOs are able to accurately forecast the evolution of plasma and have the potential to be deployed for real-time monitoring. We also illustrate their capability in forecasting the plasma shape, the locations of interactions of the plasma with the central solenoid and the divertor for the full (available) duration of the plasma shot within MAST. The FNO offers a viable alternative for surrogate modelling as it is quick to train and infer, and requires fewer data points, while being able to do zero-shot super-resolution and getting high-fidelity solutions. △ Less

Submitted 18 June, 2024; v1 submitted 10 November, 2023; originally announced November 2023.

Journal ref: Nucl. Fusion 64 056025 (2024)

Cross-tokamak Disruption Prediction based on Physics-Guided Feature Extraction and domain adaptation

Authors: Chengshuo Shen, Wei Zheng, Bihao Guo, Yonghua Ding, Dalong Chen, Xinkun Ai, Fengming Xue, Yu Zhong, Nengchao Wang, Biao Shen, Binjia Xiao, Zhongyong Chen, Yuan Pan, J-TEXT team

Abstract: The high acquisition cost and the significant demand for disruptive discharges for data-driven disruption prediction models in future tokamaks pose an inherent contradiction in disruption prediction research. In this paper, we demonstrated a novel approach to predict disruption in a future tokamak using only a few discharges. The first step is to use the existing understanding of physics to extrac… ▽ More The high acquisition cost and the significant demand for disruptive discharges for data-driven disruption prediction models in future tokamaks pose an inherent contradiction in disruption prediction research. In this paper, we demonstrated a novel approach to predict disruption in a future tokamak using only a few discharges. The first step is to use the existing understanding of physics to extract physics-guided features from the diagnostic signals of each tokamak, called physics-guided feature extraction (PGFE). The second step is to align a few data from the future tokamak (target domain) and a large amount of data from existing tokamak (source domain) based on a domain adaptation algorithm called CORrelation ALignment (CORAL). It is the first attempt at applying domain adaptation in the task of disruption prediction. PGFE has been successfully applied in J-TEXT to predict disruption with excellent performance. PGFE can also reduce the data volume requirements due to extracting the less device-specific features, thereby establishing a solid foundation for cross-tokamak disruption prediction. We have further improved CORAL (supervised CORAL, S-CORAL) to enhance its appropriateness in feature alignment for the disruption prediction task. To simulate the existing and future tokamak case, we selected J-TEXT as the existing tokamak and EAST as the future tokamak, which has a large gap in the ranges of plasma parameters. The utilization of the S-CORAL improves the disruption prediction performance on future tokamak. Through interpretable analysis, we discovered that the learned knowledge of the disruption prediction model through this approach exhibits more similarities to the model trained on large data volumes of future tokamak. △ Less

Submitted 1 November, 2023; v1 submitted 11 September, 2023; originally announced September 2023.

Comments: 17 pages, 9 figures

Critical roles of edge turbulent transport in the formation of high-field-side high-density front and density limit disruption in J-TEXT tokamak

Authors: Peng Shi, Yuhan Wang, Li Gao, Hongjuan Sun1, Qinghu Yang, Xin Xu, Chengshuo Shen, Yanqiu Chen, Qinlin Tao, Zhipeng Chen, Haosheng Wu, Lu Wang, Zhongyong Chen, Nengchao Wang, Zhoujun Yang, **gchun Li, Yonghua Ding, Yuan Pan, J-TEXT team

Abstract: This article presents an in-depth study of the sequence of events leading to density limit disruption in J-TEXT tokamak plasmas, with an emphasis on boudary turbulent transport and the high-field-side high-density (HFSHD) front. These phenomena were extensively investigated by using Langmuir probe and Polarimeter-interferometer diagnostics. This article presents an in-depth study of the sequence of events leading to density limit disruption in J-TEXT tokamak plasmas, with an emphasis on boudary turbulent transport and the high-field-side high-density (HFSHD) front. These phenomena were extensively investigated by using Langmuir probe and Polarimeter-interferometer diagnostics. △ Less

Submitted 1 September, 2023; originally announced September 2023.

Validation of the plasma-wall self-organization model for density limit in ECRH-assisted start-up of Ohmic discharges on J-TEXT

Authors: Jiaxing Liu, ** Zhu, Dominique Franck Escande, Junli Zhang, Donghui Xia, Yuhan Wang, Jiaming Wang, Qinghu Yang, Jiangang Fang, Li Gao, Zhifeng Cheng, Zhipeng Chen, Zhoujun Yang, Zhongyong Chen, Yonghua Ding, Yuan Pan, the J-TEXT team

Abstract: A recently developed plasma-wall self-organization (PWSO) model predicts a significantly enhanced density limit, which may be attainable in tokamaks with ECRH-assisted ohmic startup and sufficiently high initial neutral density. Experiments have been conducted on J-TEXT to validate such a density limit scenario based on this model. Experimental results demonstrate that increasing the pre-filled ga… ▽ More A recently developed plasma-wall self-organization (PWSO) model predicts a significantly enhanced density limit, which may be attainable in tokamaks with ECRH-assisted ohmic startup and sufficiently high initial neutral density. Experiments have been conducted on J-TEXT to validate such a density limit scenario based on this model. Experimental results demonstrate that increasing the pre-filled gas pressure or ECRH power during the startup phase can effectively enhance plasma purity and raise the density limit at the flat-top. Despite the dominant carbon fraction in the wall material, some discharges approach the edge of the density-free regime of the 1D model of PWSO. △ Less

Submitted 17 April, 2023; originally announced April 2023.

Comments: 17 pages, 8 figures

Disruption Precursor Onset Time Study Based on Semi-supervised Anomaly Detection

Authors: Xinkun Ai, Wei Zheng, Ming Zhang, Dalong Chen, Chengshuo Shen, Bihao Guo, Bingjia Xiao, Yu Zhong, Nengchao Wang, Zhoujun Yang, Zhipeng Chen, Zhongyong Chen, Yonghua Ding, Yuan Pan, J-TEXT team

Abstract: The full understanding of plasma disruption in tokamaks is currently lacking, and data-driven methods are extensively used for disruption prediction. However, most existing data-driven disruption predictors employ supervised learning techniques, which require labeled training data. The manual labeling of disruption precursors is a tedious and challenging task, as some precursors are difficult to a… ▽ More The full understanding of plasma disruption in tokamaks is currently lacking, and data-driven methods are extensively used for disruption prediction. However, most existing data-driven disruption predictors employ supervised learning techniques, which require labeled training data. The manual labeling of disruption precursors is a tedious and challenging task, as some precursors are difficult to accurately identify, limiting the potential of machine learning models. To address this issue, commonly used labeling methods assume that the precursor onset occurs at a fixed time before the disruption, which may not be consistent for different types of disruptions or even the same type of disruption, due to the different speeds at which plasma instabilities escalate. This leads to mislabeled samples and suboptimal performance of the supervised learning predictor. In this paper, we present a disruption prediction method based on anomaly detection that overcomes the drawbacks of unbalanced positive and negative data samples and inaccurately labeled disruption precursor samples. We demonstrate the effectiveness and reliability of anomaly detection predictors based on different algorithms on J-TEXT and EAST to evaluate the reliability of the precursor onset time inferred by the anomaly detection predictor. The precursor onset times inferred by these predictors reveal that the labeling methods have room for improvement as the onset times of different shots are not necessarily the same. Finally, we optimize precursor labeling using the onset times inferred by the anomaly detection predictor and test the optimized labels on supervised learning disruption predictors. The results on J-TEXT and EAST show that the models trained on the optimized labels outperform those trained on fixed onset time labels. △ Less

Submitted 27 March, 2023; originally announced March 2023.

Comments: 21 pages, 11 figures

Report number: S1738-5733(23)00556-9

Journal ref: Nuclear Engineering and Technology 2023

Probing non-linear MHD stability of the EDA H-mode in ASDEX Upgrade

Authors: A Cathey, M Hoelzl, L Gil, MG Dunne, GF Harrer, GTA Huijsmans, J Kalis, K Lackner, SJP Pamela, E Wolfrum, S Günter, the JOREK team, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: Regimes of operation in tokamaks that are devoid of large ELMs have to be better understood to extrapolate their applicability to reactor-relevant devices. This paper describes non-linear extended MHD simulations that use an experimental equilibrium from an EDA H-mode in ASDEX Upgrade. Linear ideal MHD analysis indicates that the operational point lies slightly inside of the stable region. The non… ▽ More Regimes of operation in tokamaks that are devoid of large ELMs have to be better understood to extrapolate their applicability to reactor-relevant devices. This paper describes non-linear extended MHD simulations that use an experimental equilibrium from an EDA H-mode in ASDEX Upgrade. Linear ideal MHD analysis indicates that the operational point lies slightly inside of the stable region. The non-linear simulations with the visco-resistive extended MHD code, JOREK, sustain non-axisymmetric perturbations that are linearly most unstable with toroidal mode numbers of n = \{6 \dots 9\}, but non-linearly higher and lower n become driven and the low-n become dominant. The poloidal mode velocity during the linear phase is found to correspond to the expected velocity for resistive ballooning modes. The perturbations that exist in the simulations have somewhat smaller poloidal wavenumbers (k_θ \sim 0.1 to 0.5 cm^{-1} ) than the experimental expectations for the quasi-coherent mode in EDA, and cause non-negligible transport in both the heat and particle channels. In the transition from linear to non-linear phase, the mode frequency chirps down from approximately 35 kHz to 13 kHz, which corresponds approximately to the lower end of frequencies that are typically observed in EDA H-modes in ASDEX Upgrade. △ Less

Submitted 22 January, 2023; originally announced January 2023.

MHD simulations of formation, sustainment and loss of Quiescent H-mode in the all-tungsten ASDEX Upgrade

Authors: Lorenz Meier, Matthias Hoelzl, Andres Cathey, Guido Huijsmans, Eleonora Viezzer, Mike Dunne, Jan van Dijk, Diego José Cruz Zabala, Karl Lackner, Sibylle Günter, ASDEX Upgrade Team, EUROfusion MST1 Team, JOREK Team

Abstract: Periodic edge localized modes (ELMs) are the non-linear consequences of pressure-gradient-driven ballooning modes and current-driven peeling modes becoming unstable in the pedestal region of high confinement fusion plasmas. In future tokamaks like ITER, large ELMs are foreseen to severely affect the lifetime of wall components as they transiently deposit large amounts of heat onto a narrow region… ▽ More Periodic edge localized modes (ELMs) are the non-linear consequences of pressure-gradient-driven ballooning modes and current-driven peeling modes becoming unstable in the pedestal region of high confinement fusion plasmas. In future tokamaks like ITER, large ELMs are foreseen to severely affect the lifetime of wall components as they transiently deposit large amounts of heat onto a narrow region at the divertor targets. Several strategies exist for avoidance, suppression, or mitigation of these instabilities, such as the naturally ELM-free quiescent H-mode (QH-mode). In the present article, an ASDEX Upgrade equilibrium that features a QH-mode is investigated through non-linear extended MHD simulations covering the dynamics over tens of milliseconds. The equilibrium is close to the ideal peeling limit and non-linearly develops saturated modes at the edge of the plasma. A dominant toroidal mode number of $n=1$ is found, for which the characteristic features of the edge harmonic oscillation are recovered. The saturated modes contribute to heat and particle transport preventing pedestal build-up to the ELM triggering threshold. The non-linear dynamics of the mode, in particular its interaction with the evolution of the edge safety factor is studied, which suggest a possible new saturation mechanism for the QH-mode. The simulations show good qualitative and quantitative agreement to experiments in AUG. In particular, the processes leading to the termination of QH-mode above a density threshold is studied, which results in the transition into an ELM regime. In the vicinity of this threshold, limit cycle oscillations are observed. △ Less

Submitted 12 July, 2023; v1 submitted 18 January, 2023; originally announced January 2023.

Comments: Revised version with modifications from review process included

Journal ref: Nuclear Fusion 63, 086026 (2023)

IDP-PGFE: An Interpretable Disruption Predictor based on Physics-Guided Feature Extraction

Authors: Chengshuo Shen, Wei Zheng, Yonghua Ding, Xinkun Ai, Fengming Xue, Yu Zhong, Nengchao Wang, Li Gao, Zhipeng Chen, Zhoujun Yang, Zhongyong Chen, Yuan Pan, J-TEXT team

Abstract: Disruption prediction has made rapid progress in recent years, especially in machine learning (ML)-based methods. Understanding why a predictor makes a certain prediction can be as crucial as the prediction's accuracy for future tokamak disruption predictors. The purpose of most disruption predictors is accuracy or cross-machine capability. However, if a disruption prediction model can be interpre… ▽ More Disruption prediction has made rapid progress in recent years, especially in machine learning (ML)-based methods. Understanding why a predictor makes a certain prediction can be as crucial as the prediction's accuracy for future tokamak disruption predictors. The purpose of most disruption predictors is accuracy or cross-machine capability. However, if a disruption prediction model can be interpreted, it can tell why certain samples are classified as disruption precursors. This allows us to tell the types of incoming disruption and gives us insight into the mechanism of disruption. This paper designs a disruption predictor called Interpretable Disruption Predictor based On Physics-guided feature extraction (IDP-PGFE) on J-TEXT. The prediction performance of the model is effectively improved by extracting physics-guided features. A high-performance model is required to ensure the validity of the interpretation results. The interpretability study of IDP-PGFE provides an understanding of J-TEXT disruption and is generally consistent with existing comprehension of disruption. IDP-PGFE has been applied to the disruption due to continuously increasing density towards density limit experiments on J-TEXT. The time evolution of the PGFE features contribution demonstrates that the application of ECRH triggers radiation-caused disruption, which lowers the density at disruption. While the application of RMP indeed raises the density limit in J-TEXT. The interpretability study guides intuition on the physical mechanisms of density limit disruption that RMPs affect not only the MHD instabilities but also the radiation profile, which delays density limit disruption. △ Less

Submitted 28 August, 2022; originally announced August 2022.

Comments: 17 pages, 15 figures

Modelling of saturated external MHD instabilities in tokamaks: a comparison of 3D free boundary equilibria and nonlinear stability calculations

Authors: Rohan Ramasamy, Guillermo Bustos Ramirez, Matthias Hoelzl, Jonathan Graves, Guillermo Suárez López, Karl Lackner, Sibylle Günter, the JOREK team

Abstract: 3D free boundary equilibrium computations have recently been used to model external kinks and edge harmonic oscillations (EHOs), comparing with linear MHD stability codes, and nonlinear analytic theory [Kleiner et al, PPCF 61 084005 (2019)]. In this study, results of the VMEC equilibrium code are compared further with nonlinear reduced MHD simulations, using the JOREK code. The purpose of this inv… ▽ More 3D free boundary equilibrium computations have recently been used to model external kinks and edge harmonic oscillations (EHOs), comparing with linear MHD stability codes, and nonlinear analytic theory [Kleiner et al, PPCF 61 084005 (2019)]. In this study, results of the VMEC equilibrium code are compared further with nonlinear reduced MHD simulations, using the JOREK code. The purpose of this investigation is to understand the extent to which the modelling approaches agree, and identify the important physical effects which can modify the dynamics. For the simulated external kink, which is dominated by a single toroidal harmonic, good agreement is found when a large Lundquist number is used in the JOREK simulation, such that resistive effects are sub-dominant. Modelling EHOs where multiple toroidal harmonics are linearly unstable, the saturated perturbation observed can differ in the dominant toroidal harmonic. On the ideal timescale, a n=2 EHO is observed in JOREK, while the saturated perturbation predicted by VMEC is a n=1 mode. Extending simulations into timescales where resistive effects can play a role, similar n=1 perturbations can be found. The coupling of different linearly unstable toroidal harmonics in the JOREK simulation broadens the magnetic energy spectrum and ergodises the plasma edge region, resulting in a more localised pressure perturbation. These effects are not observed in VMEC, because closed magnetic flux surfaces are enforced. Despite the sensitivity of JOREK results on the assumed resistivity, saturated states can be found using both approaches that are in reasonable agreement, even for this more advanced case. △ Less

Submitted 3 June, 2022; v1 submitted 9 March, 2022; originally announced March 2022.

Comments: Submitted to Physics of Plasmas, with revisions from review process included

Complete 3D MHD simulations of the current quench phase of ITER mitigated disruptions

Authors: F. J. Artola, A. Loarte, M. Hoelzl, M. Lehnen, N. Schwarz, the JOREK team

Abstract: Complete 3D simulations of the current quench phase of ITER disruptions are key to predict asymmetric forces acting into the ITER wall. We present for the first time such simulations for ITER mitigated disruptions at realistic Lundquist numbers. For these strongly mitigated disruptions, we find that the edge safety factor remains above 2 and the maximal integral horizontal forces remain below 1 MN… ▽ More Complete 3D simulations of the current quench phase of ITER disruptions are key to predict asymmetric forces acting into the ITER wall. We present for the first time such simulations for ITER mitigated disruptions at realistic Lundquist numbers. For these strongly mitigated disruptions, we find that the edge safety factor remains above 2 and the maximal integral horizontal forces remain below 1 MN. The maximal integral vertical force is found to be 13 MN and arises in a time scale given by the resistive wall time as expected from theoretical considerations. In this respect, the vertical force arises after the plasma current has completely decayed, showing the importance of continuing the simulations also in the absence of plasma current. We conclude that the horizontal wall force rotation is not a concern for these strongly mitigated disruptions in ITER, since when the wall forces form, there are no remaining sources of rotation. △ Less

Submitted 10 December, 2021; originally announced December 2021.

Comments: to be submitted to Nuclear Fusion

Journal ref: Nuclear Fusion 2021

MHD simulations of small ELMs at low triangularity in ASDEX Upgrade

Authors: A. Cathey, M. Hoelzl, G. Harrer, M. G. Dunne, G. T. A. Huijsmans, K. Lackner, S. J. P. Pamela, E. Wolfrum, S. Günter, the JOREK team, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: The development of small- and no-ELM regimes for ITER is a high priority topic due to the risks associated to type-I ELMs. By considering non-linear extended MHD simulations of the ASDEX Upgrade tokamak with the JOREK code, we probe a regime that avoids type-I ELMs completely provided that the separatrix density is high enough. The dynamics of the pedestal in this regime are observed to be qualita… ▽ More The development of small- and no-ELM regimes for ITER is a high priority topic due to the risks associated to type-I ELMs. By considering non-linear extended MHD simulations of the ASDEX Upgrade tokamak with the JOREK code, we probe a regime that avoids type-I ELMs completely provided that the separatrix density is high enough. The dynamics of the pedestal in this regime are observed to be qualitatively similar to the so-called quasi-continuous exhaust (QCE) regime in several ways. Repetitive type-I ELMs are substituted by roughly constant levels of outwards transport caused by peeling-ballooning modes (with dominant ballooning characteristics) which are localised in the last 5\% of the confined region (in normalised poloidal flux). The simulated low triangularity plasma transitions to a type-I ELMy H-mode if the separatrix density is sufficiently reduced or if the input heating power is sufficiently increased. The stabilising factors that play a role in the suppression of the small ELMs are also investigated by analysing the simulations, and the importance of including diamagnetic effects in the simulations is highlighted. By considering a scan in the pedestal resistivity and by measuring the poloidal velocity of the modes (and comparing to theoretical estimates for ideal and resistive modes), we identify the underlying instabilities as resistive peeling-ballooning modes. Decreasing the resistivity below experimentally-relevant conditions (i.e., going towards ideal MHD), the peeling-ballooning modes that constrain the pedestal below the type-I ELM stability boundary display sharply decreasing growth rates. △ Less

Submitted 15 October, 2021; originally announced October 2021.

Collisional-radiative non-equilibrium impurity treatment for JOREK simulations

Authors: D. Hu, G. T. A. Huijsmans, E. Nardon, M. Hoelzl, M. Lehnen, D. Bonfiglio, JOREK Team

Abstract: A collisional-radiative non-equilibrium impurity treatment for JOREK 3D nonlinear magneto-hydrodynamic (MHD) simulations has been developed. The impurities are represented by super-particles flowing along the fluid velocity field lines, while ionizing and recombining independently according to ADAS data and local fluid density and temperature. The non-equilibrium impurity contributions are then pr… ▽ More A collisional-radiative non-equilibrium impurity treatment for JOREK 3D nonlinear magneto-hydrodynamic (MHD) simulations has been developed. The impurities are represented by super-particles flowing along the fluid velocity field lines, while ionizing and recombining independently according to ADAS data and local fluid density and temperature. The non-equilibrium impurity contributions are then projected back to the fluid field for self-consistent time evolution. A 2D test case is used to compare the new non-equilibrium impurity model against previous Coronal Equilibrium (CE) impurity treatment, as well as to compare the non-equilibrium impurity behavior between the single and the two temperature model. Further, we conduct benchmark with previously published coronal non-equilibrium results by other 3D nonlinear MHD codes such as M3D-C1 and NIMROD. The new non-equilibrium treatment is shown to successfully capture the early phase cooling by weakly ionized impurities which the CE model missed. The benchmarks with M3D-C1 and NIMROD show general agreement in both the integrated quantities and the 2D profile evolution, despite the difference in the atomic model used. The above comparison and benchmark cases demonstrate the capability of the non-equilibrium impurity model for JOREK, paving the way for more sophisticated 3D non-linear Massive Material Injection (MMI) simulations which have important applications in disruption mitigation studies. △ Less

Submitted 24 June, 2021; originally announced June 2021.

Comments: 31 pages, 19 figures

Comparing spontaneous and pellet-triggered ELMs via non-linear extended MHD simulations

Authors: A. Cathey, M. Hoelzl, S. Futatani, P. T. Lang, K. Lackner, G. T. A. Huijsmans, S. J. P. Pamela, S. Günter, the JOREK team, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: Injecting frozen deuterium pellets into an ELMy H-mode plasma is a well established scheme for triggering edge localized modes (ELMs) before they naturally occur. Based on an ASDEX Upgrade H-mode plasma, this article presents a comparison of extended MHD simulations of spontaneous type-I ELMs and pellet-triggered ELMs allowing to study their non-linear dynamics in detail. In particular, pellet-tri… ▽ More Injecting frozen deuterium pellets into an ELMy H-mode plasma is a well established scheme for triggering edge localized modes (ELMs) before they naturally occur. Based on an ASDEX Upgrade H-mode plasma, this article presents a comparison of extended MHD simulations of spontaneous type-I ELMs and pellet-triggered ELMs allowing to study their non-linear dynamics in detail. In particular, pellet-triggered ELMs are simulated by injecting deuterium pellets into different time points during the pedestal build-up described in [A. Cathey et al. Nuclear Fusion 60, 124007 (2020)]. Realistic ExB and diamagnetic background plasma flows as well as the time dependent bootstrap current evolution are included during the build-up to capture the balance between stabilising and destabilising terms for the edge instabilities accurately. Dependencies on the pellet size and injection times are studied. The spatio-temporal structures of the modes and the resulting divertor heat fluxes are compared in detail between spontaneous and triggered ELMs. We observe that the premature excitation of ELMs by means of pellet injection is caused by a helical perturbation described by a toroidal mode number of n = 1. In accordance with experimental observations, the pellet-triggered ELMs show reduced thermal energy losses and narrower divertor wetted area with respect to spontaneous ELMs. The peak divertor energy fluency is seen to decrease when ELMs are triggered by pellets injected earlier during the pedestal build-up. △ Less

Submitted 11 February, 2021; originally announced February 2021.

Enhanced Preconditioner for JOREK MHD Solver

Authors: I Holod, M Hoelzl, P S Verma, GTA Huijsmans, R Nies, JOREK Team

Abstract: The JOREK extended magneto-hydrodynamic (MHD) code is a widely used simulation code for studying the non-linear dynamics of large-scale instabilities in divertor tokamak plasmas. Due to the large scale-separation intrinsic to these phenomena both in space and time, the computational costs for simulations in realistic geometry and with realistic parameters can be very high, motivating the investmen… ▽ More The JOREK extended magneto-hydrodynamic (MHD) code is a widely used simulation code for studying the non-linear dynamics of large-scale instabilities in divertor tokamak plasmas. Due to the large scale-separation intrinsic to these phenomena both in space and time, the computational costs for simulations in realistic geometry and with realistic parameters can be very high, motivating the investment of considerable effort for optimization. In this article, a set of developments regarding the JOREK solver and preconditioner is described, which lead to overall significant benefits for large production simulations. This comprises in particular enhanced convergence in highly non-linear scenarios and a general reduction of memory consumption and computational costs. The developments include faster construction of preconditioner matrices, a domain decomposition of preconditioning matrices for solver libraries that can handle distributed matrices, interfaces for additional solver libraries, an option to use matrix compression methods, and the implementation of a complex solver interface for the preconditioner. The most significant development presented consists in a generalization of the physics based preconditioner to "mode groups", which allows to account for the dominant interactions between toroidal Fourier modes in highly non-linear simulations. At the cost of a moderate increase of memory consumption, the technique can strongly enhance convergence in suitable cases allowing to use significantly larger time steps. For all developments, benchmarks based on typical simulation cases demonstrate the resulting improvements. △ Less

Submitted 31 March, 2021; v1 submitted 20 January, 2021; originally announced January 2021.

Simulations of COMPASS Vertical Displacement Events with a self-consistent model for halo currents including neutrals and sheath boundary conditions

Authors: F. J. Artola, A. Loarte, E. Matveeva, J. Havlicek, T. Markovic, J. Adamek, J. Cavalier, L. Kripner, G. T. A. Huijsmans, M. Lehnen, M. Hoelzl, R. Panek, COMPASS team, JOREK team

Abstract: The understanding of the halo current properties during disruptions is key to design and operate large scale tokamaks in view of the large thermal and electromagnetic loads that they entail. For the first time, we present a fully self-consistent model for halo current simulations including neutral particles and sheath boundary conditions. The model is used to simulate Vertical Displacement Events… ▽ More The understanding of the halo current properties during disruptions is key to design and operate large scale tokamaks in view of the large thermal and electromagnetic loads that they entail. For the first time, we present a fully self-consistent model for halo current simulations including neutral particles and sheath boundary conditions. The model is used to simulate Vertical Displacement Events (VDEs) occurring in the COMPASS tokamak. Recent COMPASS experiments have shown that the parallel halo current density at the plasma-wall interface is limited by the ion saturation current during VDE-induced disruptions. We show that usual MHD boundary conditions can lead to the violation of this physical limit and we implement this current density limitation through a boundary condition for the electrostatic potential. Sheath boundary conditions for the density, the heat flux, the parallel velocity and a realistic parameter choice (e.g. Spitzer $η$ and Spitzer-Härm $χ_\parallel$ values) extend present VDE simulations beyond the state of the art. Experimental measurements of the current density, temperature and heat flux profiles at the COMPASS divertor are compared with the results obtained from axisymmetric simulations. Since the ion saturation current density ($J_{sat}$) is shown to be essential to determine the halo current profile, parametric scans are performed to study its dependence on different quantities such as the plasma resistivity and the particle and heat diffusion coefficients. In this respect, the plasma resistivity in the halo region broadens significantly the $J_{sat}$ profile, increasing the halo width at a similar total halo current. △ Less

Submitted 5 January, 2021; originally announced January 2021.

Comments: Submitted to Plasma Physics and Controlled Fusion via the special issue of the Joint Varenna-Lausanne international workshop (October 12-16, 2020)

Transition from no-ELM response to pellet ELM triggering during pedestal build-up -- insights from extended MHD simulations

Authors: S Futatani, A Cathey, M Hoelzl, P T Lang, G T A Huijsmans, M. Dunne, JOREK Team, ASDEX Upgrade Team, EUROfusion MST1 Team

Abstract: Pellet ELM triggering is a well established scheme for decreasing the time between two successive ELM crashes below its natural value. Reliable ELM pacing has been demonstrated experimentally in several devices increasing the ELM frequency considerably. However, it was also shown that the frequency cannot be increased arbitrarily due to a so-called lag-time. During this time after a preceding natu… ▽ More Pellet ELM triggering is a well established scheme for decreasing the time between two successive ELM crashes below its natural value. Reliable ELM pacing has been demonstrated experimentally in several devices increasing the ELM frequency considerably. However, it was also shown that the frequency cannot be increased arbitrarily due to a so-called lag-time. During this time after a preceding natural or triggered ELM crash, neither a natural ELM crash occurs nor the triggering of an ELM crash by pellet injection is possible. For this article, pellet ELM triggering simulations are advanced beyond previous studies in two ways. Firstly, realistic ExB and diamagnetic background flows are included. And secondly, the pellet is injected at different stages of the pedestal build-up. This allows to recover the lag-time for the first time in simulations and investigate it in detail. A series of non-linear extended MHD simulations is performed to investigate the plasma dynamics resulting from an injection at different time points during the pedestal build-up. The experimentally observed lag-time is qualitatively reproduced well. In particular, a sharp transition is observed between the regime where no ELMs can be triggered and the regime where pellet injection causes an ELM crash. Via variations of pellet parameters and injection time, the two regimes are studied and compared in detail revealing pronounced differences in the non-linear dynamics. The toroidal mode spectrum is significantly broader when an ELM crash is triggered enhancing the stochasticity and therefore also the losses of thermal energy along magnetic field lines. In the heat fluxes to the divertor targets, pronounced toroidal asymmetries are observed. In case of high injection velocities leading to deep penetration, also the excitation of core modes like the $2/1$ neoclassical tearing mode is observed. △ Less

Submitted 24 December, 2020; v1 submitted 16 September, 2020; originally announced September 2020.

Comments: 45 pages

Radiation asymmetry and MHD destabilization during the thermal quench after impurity Shattered Pellet Injection

Authors: D. Hu, E. Nardon, M. Hoelzl, F. Wieschollek, M. Lehnen, G. T. A. Huijsmans, D. C. van Vugt, S. -H. Kim, JET contributors, JOREK Team

Abstract: The radiation response and the MHD destabilization during the thermal quench after a mixed species Shattered Pellet Injection (SPI) with impurity species neon and argon are investigated via 3D non-linear MHD simulation using the JOREK code. Both the $n=0$ global current profile contraction and the local helical cooling at each rational surface caused by the pellet fragments are found to be respons… ▽ More The radiation response and the MHD destabilization during the thermal quench after a mixed species Shattered Pellet Injection (SPI) with impurity species neon and argon are investigated via 3D non-linear MHD simulation using the JOREK code. Both the $n=0$ global current profile contraction and the local helical cooling at each rational surface caused by the pellet fragments are found to be responsible for MHD destabilization after the injection. Significant current driven mode growth is observed as the fragments cross low order rational surfaces, resulting in rapidly inward propagating stochastic magnetic field, ultimately causing the core temperature collapse. The Thermal Quench (TQ) is triggered as the fragments arrive on the $q=1$ or $q=2$ surface depending on the exact $q$ profile and thus mode structure. When injecting from a single toroidal location, strong radiation asymmetry is found before and during the TQ as a result of the unrelaxed impurity density profile along the field line and asymmetric outward heat flux. Such asymmetry gradually relaxes over the course of the TQ, and is entirely eliminated by the end of it. Simulation results indicate that the aforementioned asymmetric radiation behavior could be significantly mitigated by injection from toroidally opposite locations, provided that the time delay between the two injectors is shorter than $1ms$. It is also found that the MHD response are sensitive to the relative timing and injection configuration in these multiple injection cases. △ Less

Submitted 25 November, 2020; v1 submitted 6 September, 2020; originally announced September 2020.

Comments: 35 pages, 21 figures

Non-linear extended MHD simulations of type-I edge localised mode cycles in ASDEX Upgrade and their underlying triggering mechanism

Authors: Andres Cathey, M. Hoelzl, K. Lackner, G. T. A. Huijsmans, M. G. Dunne, E. Wolfrum, S. J. P. Pamela, F. Orain, S. Günter, the JOREK team, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: A triggering mechanism responsible for the explosive onset of edge localised modes (ELMs) in fusion plasmas is identified by performing, for the first time, non-linear magnetohydrodynamic simulations of repetitive type-I ELMs. Briefly prior to the ELM crash, destabilising and stabilising terms are affected at different timescales by an increasingly ergodic magnetic field caused by non-linear inter… ▽ More A triggering mechanism responsible for the explosive onset of edge localised modes (ELMs) in fusion plasmas is identified by performing, for the first time, non-linear magnetohydrodynamic simulations of repetitive type-I ELMs. Briefly prior to the ELM crash, destabilising and stabilising terms are affected at different timescales by an increasingly ergodic magnetic field caused by non-linear interactions between the axisymmetric background plasma and growing non-axisymmetric perturbations. The separation of timescales prompts the explosive, i.e. faster than exponential, growth of an ELM crash which lasts ${\sim}$ 500 $μ$s. The duration and size of the simulated ELM crashes compare qualitatively well with type-I ELMs in ASDEX Upgrade. As expected for type-I ELMs, a direct proportionality between the heating power in the simulations and the ELM repetition frequency is obtained. The simulations presented here are a major step forward towards predictive modelling of ELMs and of the assessment of mitigation techniques in ITER and other future tokamaks. △ Less

Submitted 26 October, 2020; v1 submitted 20 July, 2020; originally announced July 2020.