-
An Overview of the Development of Stereotactic Body Radiation Therapy
Authors:
Yanqi Zong,
Zhengrong Cui,
Luqi Lin,
Sihao Wang,
Yizhi Chen
Abstract:
Stereotactic body radiation therapy (SBRT) refers to focusing high-energy rays in three-dimensional space on the tumor lesion area, reducing the dose received by surrounding normal tissues, which can effectively improve the local control rate of the tumor and reduce the probability of complications. With the comprehensive development of medical imaging, radiation biology and other disciplines, thi…
▽ More
Stereotactic body radiation therapy (SBRT) refers to focusing high-energy rays in three-dimensional space on the tumor lesion area, reducing the dose received by surrounding normal tissues, which can effectively improve the local control rate of the tumor and reduce the probability of complications. With the comprehensive development of medical imaging, radiation biology and other disciplines, this less-fractional, high-dose radiotherapy method has been increasingly developed and applied in clinical practice. The background, radio-biological basis, key technologies and main equipment of SBRT are discussed, and its future development direction is prospected.
△ Less
Submitted 26 February, 2024;
originally announced February 2024.
-
Seismic-ionospheric disturbances in ionospheric TEC and plasma parameters associated with the 14 July 2019 Mw 7.2 Laiwui earthquake detected by the GPS and CSES
Authors:
Yuanzheng Wen,
Guangxue Wang,
Dan Tao,
Zeren Zhima,
Yijia Zong,
Xuhui Shen
Abstract:
In this study, with cross-valid analysis of total electron content (TEC) data of the global ionospheric map (GIM) from GPS and plasma parameters data recorded by China Seismo-Electromagnetic Satellite (CSES), signatures of seismic-ionospheric perturbations related to the 14 July 2019 Mw7.2 Laiwui earthquake were detected. After distinguishing the solar and geomagnetic activities, three positive te…
▽ More
In this study, with cross-valid analysis of total electron content (TEC) data of the global ionospheric map (GIM) from GPS and plasma parameters data recorded by China Seismo-Electromagnetic Satellite (CSES), signatures of seismic-ionospheric perturbations related to the 14 July 2019 Mw7.2 Laiwui earthquake were detected. After distinguishing the solar and geomagnetic activities, three positive temporal anomalies were found around the epicenter 1 day, 3 days and 8 days before the earthquake (14 July 2019) along with a negative anomaly 6 days after the earthquake, which also agrees well with the TEC spatial variations in latitude-longitude-time (LLT) maps. To further confirm the anomalies, the ionospheric plasma parameters (electron, O+and He+densities) recorded by the Langmuir probe (LAP) and Plasma Analyzer Package (PAP) onboard CSES were analyzed by using the moving mean method (MMM), which also presented remarkable enhancements along the orbits around the epicenter on day 2, day 4 and day 7 before the earthquake. To make the investigations more convincing, the disturbed orbits were compared with their corresponding four nearest revisiting orbits, whose results indeed indicate the existence of plasma parameters anomalies associated with the Laiwui earthquake. All these results illustrated that the GPS and CSES observed unusual ionospheric perturbations are highly associated with the Mw 7.2 Laiwui earthquake, which also strongly indicates the existence of pre-seismic ionospheric anomalies over the earthquake region
△ Less
Submitted 6 February, 2021;
originally announced February 2021.
-
Late-time description of immiscible Rayleigh-Taylor instability: A lattice Boltzmann study
Authors:
Haowei Huang,
Zhenhua Xia,
Hong Liang,
Ya**g Zong,
Jiangrong Xu
Abstract:
The late-time growth of single-mode immiscible Rayleigh-Taylor instability is investigated over a comprehensive range of the Reynolds numbers ($1\leq Re \leq 10000$) and Atwood numbers $(0.05 \leq A \leq 0.7)$ using an improved lattice Boltzmann multiphase method. We first reported that the instability with a moderately high Atwood number of 0.7 undergoes a sequence of distinguishing stages at hig…
▽ More
The late-time growth of single-mode immiscible Rayleigh-Taylor instability is investigated over a comprehensive range of the Reynolds numbers ($1\leq Re \leq 10000$) and Atwood numbers $(0.05 \leq A \leq 0.7)$ using an improved lattice Boltzmann multiphase method. We first reported that the instability with a moderately high Atwood number of 0.7 undergoes a sequence of distinguishing stages at high Reynolds numbers, named as the linear growth, saturated velocity growth, reacceleration and chaotic development stages. The spike and bubble at the secondary stage evolve with the constant velocities and their values agree well with the potential flow theory. Owing to the increasing strengths of the vortices, the spike and bubble are accelerated with velocities exceeding than the asymptotic values and the evolution of the instability enters into the reacceleration stage. Lastly, the curves for the spike and bubble velocities have some fluctuations at the chaotic stage and also a complex interfacial structure with large topological change is observed, while it still preserves the symmetry property. To determine the nature of the late-time growth, we also calculated the spike and bubble growth rates by using five popular statistical methods and two comparative techniques are recommended, resulting in the spike and bubble growth rates of about 0.13 and 0.022, respectively. When the Reynolds number is gradually reduced, some later stages cannot be reached successively and the structure of the evolutional interface becomes relatively smooth. Moreover, we observe that the spike growth rate shows an overall increase with the Atwood number, while it has little influence on the bubble growth rate being approximately 0.0215.
△ Less
Submitted 19 September, 2020;
originally announced September 2020.
-
High Brightness Lasing at Sub-micron Enabled by Droop-Free Fin Light-Emitting Diodes
Authors:
Babak Nikoobakht,
Robin P. Hansen,
Yuqin Zong,
Amit Agrawal,
Michael Shur,
Jerry Tersoff
Abstract:
Efficiency droop, i.e., a decline in brightness of LEDs at high electrical currents, has limited the performance of all commercially available LEDs. Until now, it has limited the output power of sub-micron LEDs and lasers to nanowatt range. Here we present a fin p-n junction LED pixel that eliminates efficiency droop, allowing LEDs brightness to increase linearly with injected current. With record…
▽ More
Efficiency droop, i.e., a decline in brightness of LEDs at high electrical currents, has limited the performance of all commercially available LEDs. Until now, it has limited the output power of sub-micron LEDs and lasers to nanowatt range. Here we present a fin p-n junction LED pixel that eliminates efficiency droop, allowing LEDs brightness to increase linearly with injected current. With record current densities of 1000 KA/cm2 (100 mA), the LEDs transition to lasing within the fin, with high brightness. Despite a light extraction efficiency of only 15%, these devices exceed the output power of any previous electrically-driven sub-micron LED or laser pixel by 100 to 1000 times, while showing comparable external quantum efficiencies. Modeling suggests that spreading of the electron-hole recombination region in fin LEDs at high injection levels suppresses the non-radiative Auger recombination processes. Further refinement of this design is expected to enable development of a new generation of high brightness electrically addressable LED and laser pixels for macro- and micro-scale applications.
△ Less
Submitted 20 June, 2020;
originally announced July 2020.
-
Experiments on bright field and dark field high energy electron imaging with thick target material
Authors:
Zheng Zhou,
Yingchao Du,
Shuchun Cao,
Zimin Zhang,
Wenhui Huang,
Huaibi Chen,
Rui Cheng,
Zhijun Chi,
Ming Liu,
Xiaolu Su,
Chuanxiang Tang,
Qili Tian,
1 Wei Wang,
Yanru Wang,
Jiahao Xiao,
Lixin Yan,
Quantang Zhao,
Yunliang Zhu,
Youwei Zhou,
Yang Zong,
Wei Gai
Abstract:
Using a high energy electron beam for the imaging of high density matter with both high spatial-temporal and areal density resolution under extreme states of temperature and pressure is one of the critical challenges in high energy density physics . When a charged particle beam passes through an opaque target, the beam will be scattered with a distribution that depends on the thickness of the mate…
▽ More
Using a high energy electron beam for the imaging of high density matter with both high spatial-temporal and areal density resolution under extreme states of temperature and pressure is one of the critical challenges in high energy density physics . When a charged particle beam passes through an opaque target, the beam will be scattered with a distribution that depends on the thickness of the material. By collecting the scattered beam either near or off axis, so-called bright field or dark field images can be obtained. Here we report on an electron radiography experiment using 45 MeV electrons from an S-band photo-injector, where scattered electrons, after interacting with a sample, are collected and imaged by a quadrupole imaging system. We achieved a few micrometers (about 4 micrometers) spatial resolution and about 10 micrometers thickness resolution for a silicon target of 300-600 micron thickness. With addition of dark field images that are captured by selecting electrons with large scattering angle, we show that more useful information in determining external details such as outlines, boundaries and defects can be obtained.
△ Less
Submitted 27 May, 2017;
originally announced May 2017.
-
Beam optical design for high energy electron radiography experiment study based on THU LINAC
Authors:
Quantang Zhao,
Shuchun Cao,
Ming Liu,
Xiaokang Sheng,
Yanru Wang,
Yang Zong,
Yi **g,
Xiaoming Zhang,
Rui Cheng,
Yongtao Zhao,
Zimin Zhang,
Yingchao Du,
Wei Gai
Abstract:
A special beam line for high energy electron radiography is designed, including achromat and imaging systems. The requirement of the angle and position correction on the target from imaging system can be approximately realized by fine tuning the quadrupoles used in the achromat. The imaging system is designed by fully considering the limitation from the laboratory and beam diagnostics devices spac…
▽ More
A special beam line for high energy electron radiography is designed, including achromat and imaging systems. The requirement of the angle and position correction on the target from imaging system can be approximately realized by fine tuning the quadrupoles used in the achromat. The imaging system is designed by fully considering the limitation from the laboratory and beam diagnostics devices space. Two kinds of imaging system are designed and both show a good performance of imaging by beam trajectory simulation. The details of the beam optical requirement and optimization design are presented here. The beam line is designed and prepared to install in Tsinghua university linear electron accelerator laboratory for further precise electron radiography experiment study.
△ Less
Submitted 12 October, 2015;
originally announced October 2015.