Showing 1–50 of 72 results for author: Zimmermann, F

NoSENSE: Learned unrolled cardiac MRI reconstruction without explicit sensitivity maps

Authors: Felix Frederik Zimmermann, Andreas Kofler

Abstract: We present a novel learned image reconstruction method for accelerated cardiac MRI with multiple receiver coils based on deep convolutional neural networks (CNNs) and algorithm unrolling. In contrast to many existing learned MR image reconstruction techniques that necessitate coil-sensitivity map (CSM) estimation as a distinct network component, our proposed approach avoids explicit CSM estimation… ▽ More We present a novel learned image reconstruction method for accelerated cardiac MRI with multiple receiver coils based on deep convolutional neural networks (CNNs) and algorithm unrolling. In contrast to many existing learned MR image reconstruction techniques that necessitate coil-sensitivity map (CSM) estimation as a distinct network component, our proposed approach avoids explicit CSM estimation. Instead, it implicitly captures and learns to exploit the inter-coil relationships of the images. Our method consists of a series of novel learned image and k-space blocks with shared latent information and adaptation to the acquisition parameters by feature-wise modulation (FiLM), as well as coil-wise data-consistency (DC) blocks. Our method achieved PSNR values of 34.89 and 35.56 and SSIM values of 0.920 and 0.942 in the cine track and map** track validation leaderboard of the MICCAI STACOM CMRxRecon Challenge, respectively, ranking 4th among different teams at the time of writing. Code will be made available at https://github.com/fzimmermann89/CMRxRecon △ Less

Submitted 27 September, 2023; originally announced September 2023.

Comments: Accepted at MICCAI STACOM 2023

PINQI: An End-to-End Physics-Informed Approach to Learned Quantitative MRI Reconstruction

Authors: Felix F Zimmermann, Christoph Kolbitsch, Patrick Schuenke, Andreas Kofler

Abstract: Quantitative Magnetic Resonance Imaging (qMRI) enables the reproducible measurement of biophysical parameters in tissue. The challenge lies in solving a nonlinear, ill-posed inverse problem to obtain the desired tissue parameter maps from acquired raw data. While various learned and non-learned approaches have been proposed, the existing learned methods fail to fully exploit the prior knowledge ab… ▽ More Quantitative Magnetic Resonance Imaging (qMRI) enables the reproducible measurement of biophysical parameters in tissue. The challenge lies in solving a nonlinear, ill-posed inverse problem to obtain the desired tissue parameter maps from acquired raw data. While various learned and non-learned approaches have been proposed, the existing learned methods fail to fully exploit the prior knowledge about the underlying MR physics, i.e. the signal model and the acquisition model. In this paper, we propose PINQI, a novel qMRI reconstruction method that integrates the knowledge about the signal, acquisition model, and learned regularization into a single end-to-end trainable neural network. Our approach is based on unrolled alternating optimization, utilizing differentiable optimization blocks to solve inner linear and non-linear optimization tasks, as well as convolutional layers for regularization of the intermediate qualitative images and parameter maps. This design enables PINQI to leverage the advantages of both the signal model and learned regularization. We evaluate the performance of our proposed network by comparing it with recently published approaches in the context of highly undersampled $T_1$-map**, using both a simulated brain dataset, as well as real scanner data acquired from a physical phantom and in-vivo data from healthy volunteers. The results demonstrate the superiority of our proposed solution over existing methods and highlight the effectiveness of our method in real-world scenarios. △ Less

Submitted 7 May, 2024; v1 submitted 19 June, 2023; originally announced June 2023.

Comments: This work has been accepted for publication in IEEE Transactions on Computational Imaging. Changes were made to this version by the publisher before publication. IEEE Transactions on Computational Imaging (2024)

Using the LHeC ERL to generate high-energy photons

Authors: Najmeh Sadat Mirian, Elham Salehi, Frank Zimmermann

Abstract: The Large Hadron electron Collider (LHeC) is a proposed future particle physics project colliding 60 GeV electrons from a six-pass recirculating energy-recovery linac (ERL) with 7 TeV protons stored in the LHC. The ERL technology allows for much higher beam current and, therefore, higher luminosity than a traditional linac. The high-current, high-energy electron beam can also be used to drive a fr… ▽ More The Large Hadron electron Collider (LHeC) is a proposed future particle physics project colliding 60 GeV electrons from a six-pass recirculating energy-recovery linac (ERL) with 7 TeV protons stored in the LHC. The ERL technology allows for much higher beam current and, therefore, higher luminosity than a traditional linac. The high-current, high-energy electron beam can also be used to drive a free electron laser (FEL). In this contribution, we examine how the LHeC ERL can serve as a source of high-energy photons for studies in nuclear physics, high-energy physics, Axion detection, dark energy, and protein crystallography. In the first section, we discuss the performance of the LHeC-based FEL, operated in the SASE mode for generating photon pulses at wavelengths ranging from 200 keV to 600 keV. In the second section, we investigate photon production via Laser Compton scattering (LCS). △ Less

Submitted 24 May, 2023; originally announced May 2023.

Comments: 4

FCC-ee Status and Overview

Authors: Frank Zimmermann

Abstract: We report on the Future Circular Collider (FCC) Feasibility Study, the mid-term review in autumn 2023, and the longer term timeline. We report on the Future Circular Collider (FCC) Feasibility Study, the mid-term review in autumn 2023, and the longer term timeline. △ Less

Submitted 22 April, 2023; originally announced May 2023.

Comments: Invited contribution to ICFA Newsletter no. 85

Optics design and correction challenges for the high energy booster of FCC-ee

Authors: Antoine Chance, Barbara Dalena, Tatiana Da Silva, Ahmad Mashal, Mauro Migliorati, Adnan Ghribi, Ali Rajabi, Frank Zimmermann

Abstract: One of the major upcoming challenges in particle physics is achieving precise measurements of the Z, W, and H bosons, as well as the top quark. To meet these targets, the next e\textsuperscript{+}e\textsuperscript{-} collider complex, FCC-ee, will need to achieve unprecedented luminosities. The FCC-IS European Study is investigating the feasibility of these challenges, with a cornerstone of the st… ▽ More One of the major upcoming challenges in particle physics is achieving precise measurements of the Z, W, and H bosons, as well as the top quark. To meet these targets, the next e\textsuperscript{+}e\textsuperscript{-} collider complex, FCC-ee, will need to achieve unprecedented luminosities. The FCC-IS European Study is investigating the feasibility of these challenges, with a cornerstone of the study being the design and optimization of the high-energy booster (HEB). This paper provides an update on the status of the HEB of FCC-ee in light of recent developments in the injector and collider survey, as well as an overview of ongoing work on longitudinal stability and design robustness in relation to field, alignment, and diagnostics errors. Constraints and effects related to the design frequency of the accelerating cavities, as well as collective effects, are also highlighted. Lastly, the paper presents an investigation into an alternative arcs cell design. △ Less

Submitted 4 April, 2023; v1 submitted 31 March, 2023; originally announced April 2023.

Comments: pre-print of ICFA Newsletter 2023

Snowmass'21 Accelerator Frontier Report

Authors: S. Gourlay, T. Raubenheimer, V. Shiltsev, G. Arduini, R. Assmann, C. Barbier, M. Bai, S. Belomestnykh, S. Bermudez, P. Bhat, A. Faus-Golfe, J. Galambos, C. Geddes, G. Hoffstaetter, M. Hogan, Z. Huang, M. Lamont, D. Li, S. Lund, R. Milner, P. Musumeci, E. Nanni, M. Palmer, N. Pastrone, F. Pellemoine , et al. (13 additional authors not shown)

Abstract: In 2020-2022, extensive discussions and deliberations have taken place in corresponding topical working groups of the Snowmass Accelerator Frontier (AF) and in numerous joint meetings with other Frontiers, Snowmass-wide meetings, a series of Colloquium-style Agoras, cross-Frontier Forums on muon and electron-positron colliders and the collider Implementation Task Force (ITF). The outcomes of these… ▽ More In 2020-2022, extensive discussions and deliberations have taken place in corresponding topical working groups of the Snowmass Accelerator Frontier (AF) and in numerous joint meetings with other Frontiers, Snowmass-wide meetings, a series of Colloquium-style Agoras, cross-Frontier Forums on muon and electron-positron colliders and the collider Implementation Task Force (ITF). The outcomes of these activities are summarized in this Accelerator Frontier report. △ Less

Submitted 17 November, 2022; v1 submitted 28 September, 2022; originally announced September 2022.

Comments: contribution to Snowmass'21, v.2 (final)

Accelerators for Electroweak Physics and Higgs Boson Studies

Authors: A. Faus-Golfe, G. H. Hoffstaetter, Q. Qin, F. Zimmermann, T. Barklow, E. Barzi, S. Belomestnykh, M. Biagini, M. Chamizo Llatas, J. Gao, E. Gianfelice, B. List, V. Litvinenko, E. Nanni, T. Raubenheimer, T. Roser, T. Satogata, V. Shiltsev, S. Stapnes, V. Telnov

Abstract: We discuss the goals, the designs, the state of technical readiness, and the critical R&D needs of the accelerators that are currently under discussion as Higgs and electroweak factories. We also address the respective staging options enabling future energy-frontier colliders. The accelerators covered are based on many different techniques and approaches. They include several circular colliders, v… ▽ More We discuss the goals, the designs, the state of technical readiness, and the critical R&D needs of the accelerators that are currently under discussion as Higgs and electroweak factories. We also address the respective staging options enabling future energy-frontier colliders. The accelerators covered are based on many different techniques and approaches. They include several circular colliders, various linear colliders, colliders based on energy recovery linacs (ERLs), ERL-ring combinations, as well as gamma-gamma colliders. The linear colliders proposed consist of options for the International Linear Collider (ILC), for the Compact Linear Collider (CLIC), for the Cold Copper Collider (C^3), and for the more recent Higgs-Energy Lepton Collider (HELEN). ERLs are key components of the Recycling Linear e+e- Collider (ReLiC), of the Energy Recovery Linear Collider (ERLC), and of the Circular Energy Recovery Collider (CERC). Among the more conventional ring colliders, the following proposals are featured: the Future Circular Collider (FCC-ee), the Circular Electron Positron Collider (CEPC), the Electron Positron Circular Collider at Fermilab (EPCCF), and the Large Electron Positron collider $\#$3 (LEP-3). In addition, we consider the X-ray FEL based gamma-gamma Collider Higgs Factory (XCC) and the High-Energy High-Luminosity gamma-gamma collider (HE&HL gamma-gamma). Finally, a Higgs factory based on a circular muon collider is mentioned for completeness. △ Less

Submitted 20 November, 2022; v1 submitted 13 September, 2022; originally announced September 2022.

Comments: Submitted to Snowmass 2021

Ultimate Limit of Future Colliders

Authors: M. Bai, V. Shiltsev, G. White, F. Zimmermann

Abstract: With seven operational colliders in the world and two under construction, the international particle physics community not only actively explores options for the next facilities for detailed studies of the Higgs/electroweak physics and beyond-the-LHC energy frontier, but also seeks a clear picture of the limits of the colliding beams method. In this paper, we try to consolidate various recent effo… ▽ More With seven operational colliders in the world and two under construction, the international particle physics community not only actively explores options for the next facilities for detailed studies of the Higgs/electroweak physics and beyond-the-LHC energy frontier, but also seeks a clear picture of the limits of the colliding beams method. In this paper, we try to consolidate various recent efforts in identifying physics limits of colliders in conjunction with societal sustainability, and share our thoughts about the perspective of reaching the ultimate collider that is at the quantum limit. △ Less

Submitted 8 September, 2022; originally announced September 2022.

Report number: FERMILAB-CONF-22-574-AD

U.S. National Accelerator R\&D Program on Future Colliders

Authors: P. C. Bhat, S. Belomestnykh, A. Bross, S. Dasu, D. Denisov, S. Gourlay, S. **dariani, A. J. Lankford, S. Nagaitsev, E. A. Nanni, M. A. Palmer, T. Raubenheimer, V. Shiltsev, A. Valishev, C. Vernieri, F. Zimmermann

Abstract: Future colliders are an essential component of a strategic vision for particle physics. Conceptual studies and technical developments for several exciting future collider options are underway internationally. In order to realize a future collider, a concerted accelerator R\&D program is required. The U.S. HEP accelerator R\&D program currently has no direct effort in collider-specific R\&D area. T… ▽ More Future colliders are an essential component of a strategic vision for particle physics. Conceptual studies and technical developments for several exciting future collider options are underway internationally. In order to realize a future collider, a concerted accelerator R\&D program is required. The U.S. HEP accelerator R\&D program currently has no direct effort in collider-specific R\&D area. This shortcoming greatly compromises the U.S. leadership role in accelerator and particle physics. In this white paper, we propose a new national accelerator R\&D program on future colliders and outline the important characteristics of such a program. △ Less

Submitted 13 July, 2022; originally announced July 2022.

Comments: 8 pages; Submitted to the Proceedings of the US Community Study on the Future of Particle Physics (Snowmass 2021)

Enhanced ultrafast X-ray diffraction by transient resonances

Authors: Stephan Kuschel, Phay J. Ho, Andre Al Haddad, Felix Zimmermann, Leonie Flueckiger, Matthew R. Ware, Joseph Duris, James P. MacArthur, Alberto Lutman, Ming-Fu Lin, Xiang Li, Kazutaka Nakahara, Jeff W. Aldrich, Peter Walter, Linda Young, Christoph Bostedt, Agostino Marinelli, Tais Gorkhover

Abstract: Diffraction-before-destruction imaging with single ultrashort X-ray pulses has the potential to visualise non-equilibrium processes, such as chemical reactions, at the nanoscale with sub-femtosecond resolution in the native environment without the need of crystallization. Here, a nanospecimen partially diffracts a single X-ray flash before sample damage occurs. The structural information of the sa… ▽ More Diffraction-before-destruction imaging with single ultrashort X-ray pulses has the potential to visualise non-equilibrium processes, such as chemical reactions, at the nanoscale with sub-femtosecond resolution in the native environment without the need of crystallization. Here, a nanospecimen partially diffracts a single X-ray flash before sample damage occurs. The structural information of the sample can be reconstructed from the coherent X-ray interference image. State-of-art spatial resolution of such snapshots from individual heavy element nanoparticles is limited to a few nanometers. Further improvement of spatial resolution requires higher image brightness which is ultimately limited by bleaching effects of the sample. We compared snapshots from individual 100 nm Xe nanoparticles as a function of the X-ray pulse duration and incoming X-ray intensity in the vicinity of the Xe M-shell resonance. Surprisingly, images recorded with few femtosecond and sub-femtosecond pulses are up to 10 times brighter than the static linear model predicts. Our Monte-Carlo simulation and statistical analysis of the entire data set confirms these findings and attributes the effect to transient resonances. Our simulation suggests that ultrafast form factor changes during the exposure can increase the brightness of X-ray images by several orders of magnitude. Our study guides the way towards imaging with unprecedented combination of spatial and temporal resolution at the nanoscale. △ Less

Submitted 12 July, 2022; originally announced July 2022.

The Development of Energy-Recovery Linacs

Authors: Chris Adolphsen, Kevin Andre, Deepa Angal-Kalinin, Michaela Arnold, Kurt Aulenbacher, Steve Benson, Jan Bernauer, Alex Bogacz, Maarten Boonekamp, Reinhard Brinkmann, Max Bruker, Oliver Brüning, Camilla Curatolo, Patxi Duthill, Oliver Fischer, Georg Hoffstaetter, Bernhard Holzer, Ben Hounsell, Andrew Hutton, Erk Jensen, Walid Kaabi, Dmitry Kayran, Max Klein, Jens Knobloch, Geoff Krafft , et al. (24 additional authors not shown)

Abstract: Energy-recovery linacs (ERLs) have been emphasised by the recent (2020) update of the European Strategy for Particle Physics as one of the most promising technologies for the accelerator base of future high-energy physics. The current paper has been written as a base document to support and specify details of the recently published European roadmap for the development of energy-recovery linacs. Th… ▽ More Energy-recovery linacs (ERLs) have been emphasised by the recent (2020) update of the European Strategy for Particle Physics as one of the most promising technologies for the accelerator base of future high-energy physics. The current paper has been written as a base document to support and specify details of the recently published European roadmap for the development of energy-recovery linacs. The paper summarises the previous achievements on ERLs and the status of the field and its basic technology items. The main possible future contributions and applications of ERLs to particle and nuclear physics as well as industrial developments are presented. The paper includes a vision for the further future, beyond 2030, as well as a comparative data base for the main existing and forthcoming ERL facilities. A series of continuous innovations, such as on intense electron sources or high-quality superconducting cavity technology, will massively contribute to the development of accelerator physics at large. Industrial applications are potentially revolutionary and may carry the development of ERLs much further, establishing another shining example of the impact of particle physics on society and its technical foundation with a special view on sustaining nature. △ Less

Submitted 27 September, 2022; v1 submitted 5 July, 2022; originally announced July 2022.

"Colliders or Bust"

Authors: Frank Zimmermann

Abstract: Charged-particle colliders have proven key instruments of discovery in high-energy physics. Pushing the frontiers of our knowledge ever further has relied on, and still keeps calling for, ever better performance and novel techniques. During more than four decades, Swapan Chattopadhyay has made numerous essential contributions to this endeavour. Often far ahead of his time, he helped advance many a… ▽ More Charged-particle colliders have proven key instruments of discovery in high-energy physics. Pushing the frontiers of our knowledge ever further has relied on, and still keeps calling for, ever better performance and novel techniques. During more than four decades, Swapan Chattopadhyay has made numerous essential contributions to this endeavour. Often far ahead of his time, he helped advance many areas of collider development, notably in the domains of stochastic cooling, the development of asymmetric B factories, the design of next- and next-next-generation of high-energy colliders, and the harnessing of energy-recovery for particle colliders. △ Less

Submitted 25 April, 2022; originally announced April 2022.

Comments: Invited Contribution to Swapan Chattopadhyay Retirement Symposium, 30 April 2021. To be published in a special volume of IJMPA

PetaVolts per meter Plasmonics: Snowmass21 White Paper

Authors: Aakash A. Sahai, Mark Golkowski, Stephen Gedney, Thomas Katsouleas, Gerard Andonian, Glen White, Joachim Stohr, Patric Muggli, Daniele Filipetto, Frank Zimmermann, Toshiki Tajima, Gerard Mourou, Javier Resta-Lopez

Abstract: Plasmonic modes offer the potential to achieve PetaVolts per meter fields, that would transform the current paradigm in collider development in addition to non-collider searches in fundamental physics. PetaVolts per meter plasmonics relies on collective oscillations of the free electron Fermi gas inherent in the conduction band of materials that have a suitable combination of constituent atoms and… ▽ More Plasmonic modes offer the potential to achieve PetaVolts per meter fields, that would transform the current paradigm in collider development in addition to non-collider searches in fundamental physics. PetaVolts per meter plasmonics relies on collective oscillations of the free electron Fermi gas inherent in the conduction band of materials that have a suitable combination of constituent atoms and ionic lattice structure. As the conduction band free electron density, at equilibrium, can be as high as $\rm 10^{24}cm^{-3}$, electromagnetic fields of the order of $\rm 0.1 \sqrt{\rm n_0(10^{24}cm^{-3})} ~ PVm^{-1}$ can be sustained by plasmonic modes. Engineered materials not only allow highly tunable material properties but quite critically make it possible to overcome disruptive instabilities that dominate the interactions in bulk media. Due to rapid shielding by the free electron Fermi gas, dielectric effects are strongly suppressed. Because the ionic lattice, the corresponding electronic energy bands and the free electron gas are governed by quantum mechanical effects, comparisons with plasmas are merely notional. Based on this framework, it is critical to address various challenges that underlie PetaVolts per meter plasmonics including stable excitation of plasmonic modes while accounting for their effects on the ionic lattice and the electronic energy band structure over femtosecond timescales. We summarize the ongoing theoretical and experimental efforts as well as map out strategies for the future. Extreme plasmonic fields can shape the future by not only bringing tens of TeV to multi-PeV center-of-mass-energies within reach but also by opening novel pathways in non-collider HEP. In view of this promise, we invite the scientific community to help realize the immense potential of PV/m plasmonics and call for significant expansion of the US and international R\&D program. △ Less

Submitted 22 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

Future Circular Lepton Collider FCC-ee: Overview and Status

Authors: I. Agapov, M. Benedikt, A. Blondel, M. Boscolo, O. Brunner, M. Chamizo Llatas, T. Charles, D. Denisov, W. Fischer, E. Gianfelice-Wendt, J. Gutleber, P. Janot, M. Koratzinos, R. Losito, S. Nagaitsev, K. Oide, T. Raubenheimer, R. Rimmer, J. Seeman, D. Shatilov, V. Shiltsev, M. Sullivan, U. Wienands, F. Zimmermann

Abstract: The worldwide High Energy Physics community widely agrees that the next collider should be a Higgs factory. Acknowledging this priority, in 2021 CERN has launched the international Future Circular Collider (FCC) Feasibility Study (FS). The FCC Integrated Project foresees, in a first stage, a high-luminosity high-energy electron-positron collider, serving as Higgs, top and electroweak factory, and,… ▽ More The worldwide High Energy Physics community widely agrees that the next collider should be a Higgs factory. Acknowledging this priority, in 2021 CERN has launched the international Future Circular Collider (FCC) Feasibility Study (FS). The FCC Integrated Project foresees, in a first stage, a high-luminosity high-energy electron-positron collider, serving as Higgs, top and electroweak factory, and, in a second stage, an energy frontier hadron collider, with a centre-of-mass energy of at least 100 TeV. In this paper, we address a few key elements of the FCC-ee accelerator design, its performance reach, and underlying technologies, as requested by the Snowmass process. The Conceptual Design Report for the FCC, published in 2019, serves as our primary reference. We also summarize a few recent changes and improvements. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021

Future Circular Hadron Collider FCC-hh: Overview and Status

Authors: M. Benedikt, A. Chance, B. Dalena, D. Denisov, M. Giovannozzi, J. Gutleber, R. Losito, M. Mangano, T. Raubenheimer, W. Riegler, V. Shiltsev, D. Schulte, D. Tommasini, F. Zimmermann

Abstract: The Future Circular Collider (FCC) study was launched as a world-wide international collaboration hosted by CERN. Its goal is to push the field to the next energy frontier beyond LHC, increasing by an order of magnitude the mass of particles that could be directly produced, and decreasing by an order of magnitude the subatomic distances to be studied. The FCC study covers two accelerators, namely,… ▽ More The Future Circular Collider (FCC) study was launched as a world-wide international collaboration hosted by CERN. Its goal is to push the field to the next energy frontier beyond LHC, increasing by an order of magnitude the mass of particles that could be directly produced, and decreasing by an order of magnitude the subatomic distances to be studied. The FCC study covers two accelerators, namely, an energy-frontier hadron collider (FCC-hh) and a highest luminosity, high-energy lepton collider (FCC-ee). Both rings are hosted in the same 100 km tunnel infrastructure, replicating the CERN strategy for LEP and LHC, i.e. develo** a lepton and a hadron ring sharing the same tunnel. This paper is devoted to the FCC-hh and summarizes the key features of the FCC-hh accelerator design, performance reach, and underlying technologies. The material presented in this paper builds on the conceptual design report published in 2019, and extends it, including also the progress made and the results achieved since then. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021

Mitigation of Electron Cloud Effects in the FCC-ee Collider

Authors: Fatih Yaman, Giovanni Iadarola, Roberto Kersevan, Salim Ogur, Kazuhito Ohmi, Frank Zimmermann, Mikhail Zobov

Abstract: Electron clouds forming inside the beam vacuum chamber due to photoemission and secondary emission may limit the accelerator performance. Specifically, the electron clouds can blow up the vertical emittance of a positron beam, through a head-tail-type single-bunch instability, if the central electron density exceeds a certain threshold value, that can be estimated analytically. Using the codes PyE… ▽ More Electron clouds forming inside the beam vacuum chamber due to photoemission and secondary emission may limit the accelerator performance. Specifically, the electron clouds can blow up the vertical emittance of a positron beam, through a head-tail-type single-bunch instability, if the central electron density exceeds a certain threshold value, that can be estimated analytically. Using the codes PyECLOUD and VSim, we carried out detailed simulations of the electron-cloud build up for the main arcs and the dam** ring of the FCC-ee collider, in order to identify the effective photoemission rate and secondary emission yield required for achieving and maintaining the design emittance. To this end, we present the simulated electron density at the centre of the beam pipe for various bunch spacings, secondary emission yields, and photoemission parameters, in the dam** ring and in the arcs of the collider positron ring. To gain further insight into the underlying dynamics, the obtained spatial and energy distributions of the cloud electrons are illustrated as a function of time. In addition, we compare results obtained for two different secondary emission models ("Furman-Pivi" and "ECLOUD"), thereby indicating the uncertainty inherent in this type of study, without any prototype vacuum chambers yet available. We also point out a few situations where the two secondary-emission models yield similar density values. Finally, based on our simulation results for two different design variants, we conclude that the new parameter baseline of the FCC-ee will facilitate electron-cloud mitigation. △ Less

Submitted 9 March, 2022; originally announced March 2022.

European Strategy for Particle Physics -- Accelerator R&D Roadmap

Authors: C. Adolphsen, D. Angal-Kalinin, T. Arndt, M. Arnold, R. Assmann, B. Auchmann, K. Aulenbacher, A. Ballarino, B. Baudouy, P. Baudrenghien, M. Benedikt, S. Bentvelsen, A. Blondel, A. Bogacz, F. Bossi, L. Bottura, S. Bousson, O. Brüning, R. Brinkmann, M. Bruker, O. Brunner, P. N. Burrows, G. Burt, S. Calatroni, K. Cassou , et al. (111 additional authors not shown)

Abstract: The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified… ▽ More The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified in the Strategy update. The R&D objectives include: improvement of the performance and cost-performance of magnet and radio-frequency acceleration systems; investigations of the potential of laser / plasma acceleration and energy-recovery linac techniques; and development of new concepts for muon beams and muon colliders. The goal of the roadmap is to document the collective view of the field on the next steps for the R&D programme, and to provide the evidence base to support subsequent decisions on prioritisation, resourcing and implementation. △ Less

Submitted 30 March, 2022; v1 submitted 19 January, 2022; originally announced January 2022.

Comments: 270 pages, 58 figures. Editor: N. Mounet. LDG chair: D. Newbold. Panel chairs: P. Védrine (HFM), S. Bousson (RF), R. Assmann (plasma), D. Schulte (muon), M. Klein (ERL). Panel editors: B. Baudouy (HFM), L. Bottura (HFM), S. Bousson (RF), G. Burt (RF), R. Assmann (plasma), E. Gschwendtner (plasma), R. Ischebeck (plasma), C. Rogers (muon), D. Schulte (muon), M. Klein (ERL)

Report number: CERN-2022-001

Journal ref: European Strategy for Particle Physics - Accelerator R&D Roadmap, N. Mounet (ed.), CERN Yellow Reports: Monographs, CERN-2022-001 (CERN, Geneva, 2022)

Bright Ångstrom and Picometre Free Electron Laser Based on the LHeC Energy Recovery Linac

Authors: Z. Nergiz, N. S. Mirian, A. Aksoy, D. Zhou, F. Zimmermann, H. Aksakal

Abstract: The Large Hadron electron Collider (LHeC) is a proposed future particle-physics project colliding 60 GeV electrons from a six-pass recirculating energy-recovery Linac (ERL) with 7 TeV protons stored in the LHC. The ERL technology allows for much higher beam current and, therefore, higher luminosity than a traditional Linac. The high-current, high-energy electron beam can also be used to drive a fr… ▽ More The Large Hadron electron Collider (LHeC) is a proposed future particle-physics project colliding 60 GeV electrons from a six-pass recirculating energy-recovery Linac (ERL) with 7 TeV protons stored in the LHC. The ERL technology allows for much higher beam current and, therefore, higher luminosity than a traditional Linac. The high-current, high-energy electron beam can also be used to drive a free electron laser (FEL). In this study, we investigate the performance of an LHeC-based FEL, operated in the self-amplified spontaneous emission mode using electron beams after one or two turns, with beam energies of, e.g., 10, 20, 30 and 40 GeV, and aim at producing X-ray pulses at wavelengths ranging from 8~Å to 0.5~Å. In addition, we explore a possible path to use the 40 GeV electron beam for generating photon pulses at much lower wavelengths, down to a few picometre. We demonstrate that such ERL-based high-energy FEL would have the potential to provide orders of magnitude higher average brilliance at Å wavelengths than any other FEL either existing or proposed. It might also allow a pioneering step into the picometre wavelength regime. △ Less

Submitted 20 August, 2021; v1 submitted 28 July, 2021; originally announced July 2021.

Comments: 13 pages, 13 figures, submitted to Physical Review Accelerators and Beams (PRAB)

Journal ref: Phys. Rev. Accel. Beams 24, 100701 (2021)

A very high energy hadron collider on the Moon

Authors: James Beacham, Frank Zimmermann

Abstract: The long-term prospect of building a hadron collider around the circumference of a great circle of the Moon is sketched. A Circular Collider on the Moon (CCM) of $\sim$11000 km in circumference could reach a proton-proton center-of-mass collision energy of 14 PeV -- a thousand times higher than the Large Hadron Collider at CERN -- optimistically assuming a dipole magnetic field of 20 T. Several as… ▽ More The long-term prospect of building a hadron collider around the circumference of a great circle of the Moon is sketched. A Circular Collider on the Moon (CCM) of $\sim$11000 km in circumference could reach a proton-proton center-of-mass collision energy of 14 PeV -- a thousand times higher than the Large Hadron Collider at CERN -- optimistically assuming a dipole magnetic field of 20 T. Several aspects of such a project are presented, including siting, construction, availability of necessary materials on the Moon, and powering, as well as a discussion of future studies and further information needed to determine the more concrete feasibility of each. Machine parameters and vacuum requirements are explored, and an injection scheme is delineated. Other unknowns are set down. Due to the strong interest from multiple organizations in establishing a permanent Moon presence, a CCM could be the (next-to-) next-to-next-generation discovery machine for high-energy particle physics and a natural successor to next-generation machines, such as the proposed Future Circular Collider at CERN or a Super Proton-Proton Collider in China, and other future machines, such as a Collider in the Sea, in the Gulf of Mexico. A CCM would serve as an important step** stone towards a Planck-scale collider sited in our Solar System. △ Less

Submitted 9 January, 2022; v1 submitted 3 June, 2021; originally announced June 2021.

Comments: 37 pages, 5 figures, 2 tables; new section on "Classification of Unknowns" added; accepted for publication in the New Journal of Physics

Challenges for the interaction region design of the Future Circular Collider FCC-ee

Authors: Manuela Boscolo, Nicola Bacchetta, Michael Benedikt, Laurent Brunetti, Helmut Burkhardt, Andrea Ciarma, Mogens Dam, Francesco Fransesini, Mark Jones, Roberto Kersevan, Mike Koratzinos, Marian Lueckhof, Mauro Migliorati, Eva Montbarbon, Alexander Novokhatski, Katsunobu Oide, Luigi Pellegrino, Freddy Poirier, Maurizio Serluca, Michael K. Sullivan, Leonard Watrelot, Frank Zimmermann

Abstract: The FCC-ee is a proposed future high-energy, high-intensity and high-precision lepton collider. Here, we present the latest development for the FCC-ee interaction regions, which shall ensure optimum conditions for the particle physics experiments. We discuss measures of background reduction and a revised interaction region layout including a low impedance compact beam chamber design. We also discu… ▽ More The FCC-ee is a proposed future high-energy, high-intensity and high-precision lepton collider. Here, we present the latest development for the FCC-ee interaction regions, which shall ensure optimum conditions for the particle physics experiments. We discuss measures of background reduction and a revised interaction region layout including a low impedance compact beam chamber design. We also discuss the possible impact of the radiation generated in the interaction region including beamstrahlung. △ Less

Submitted 20 May, 2021; originally announced May 2021.

Comments: 3 pp, 5 figs, presented at IPAC21, May 24-28th, 2021

Report number: WEPAB029

Storage Rings and Gravitational Waves: Summary and Outlook

Authors: A. Berlin, M. Brüggen, O. Buchmueller, P. Chen, R. T. D'Agnolo, R. Deng, J. R. Ellis, S. Ellis, G. Franchetti, A. Ivanov, J. M. Jowett, A. P. Kobushkin, S. Y. Lee, J. Liske, K. Oide, S. Rao, J. Wenninger, M. Wellenzohn, M. Zanetti, F. Zimmermann

Abstract: We report some highlights from the ARIES APEC workshop on ``Storage Rings and Gravitational Waves'' (SRGW2021), held in virtual space from 2 February to 18 March 2021, and sketch a tentative landscape for using accelerators and associated technologies for the detection or generation of gravitational waves. We report some highlights from the ARIES APEC workshop on ``Storage Rings and Gravitational Waves'' (SRGW2021), held in virtual space from 2 February to 18 March 2021, and sketch a tentative landscape for using accelerators and associated technologies for the detection or generation of gravitational waves. △ Less

Submitted 3 May, 2021; originally announced May 2021.

Comments: 17 pages, 9 figures, highlights from the ARIES APEC workshop on "Storage Rings and Gravitational Waves"(SRGW2021)

Report number: KCL-PH-TH/2021-28, CERN-TH-2021-068

Structured light for ultrafast laser micro- and nanoprocessing

Authors: Daniel Flamm, Daniel Günther Grossmann, Marc Sailer, Myriam Kaiser, Felix Zimmermann, Keyou Chen, Michael Jenne, Jonas Kleiner, Julian Hellstern, Christoph Tillkorn, Dirk H Sutter, Malte Kumkar

Abstract: The industrial maturity of ultrashort pulsed lasers has triggered the development of a plethora of material processing strategies. Recently, the combination of these remarkable temporal pulse properties with advanced structured light concepts has led to breakthroughs in the development of novel laser application methods, which will now gradually reach industrial environments. We review the efficie… ▽ More The industrial maturity of ultrashort pulsed lasers has triggered the development of a plethora of material processing strategies. Recently, the combination of these remarkable temporal pulse properties with advanced structured light concepts has led to breakthroughs in the development of novel laser application methods, which will now gradually reach industrial environments. We review the efficient generation of customized focus distributions from the near infrared down to the deep ultraviolet, e.g., based on non-diffracting beams and 3D-beam splitters, and demonstrate their impact for micro- and nanomachining of a wide range of materials. In the beam sha** concepts presented, special attention was paid to suitability for both high energies and high powers. △ Less

Submitted 27 February, 2021; v1 submitted 18 December, 2020; originally announced December 2020.

Comments: Accepted manuscript, 19 pages, 20 figures and 111 references

Journal ref: Opt. Eng. 60(2) 025105 (24 February 2021)

Beam sha** for ultrafast materials processing

Authors: Daniel Flamm, Daniel Günther Grossmann, Michael Jenne, Felix Zimmermann, Jonas Kleiner, Myriam Kaiser, Julian Hellstern, Christoph Tillkorn, Malte Kumkar

Abstract: The remarkable temporal properties of ultra-short pulsed lasers in combination with novel beam sha** concepts enable the development of completely new material processing strategies. We demonstrate the benefit of employing focus distributions being tailored in all three spatial dimensions. As example advanced Bessel-like beam profiles, 3D-beam splitting concepts and flat-top focus distributions… ▽ More The remarkable temporal properties of ultra-short pulsed lasers in combination with novel beam sha** concepts enable the development of completely new material processing strategies. We demonstrate the benefit of employing focus distributions being tailored in all three spatial dimensions. As example advanced Bessel-like beam profiles, 3D-beam splitting concepts and flat-top focus distributions are used to achieve high-quality and efficient results for cutting, welding and drilling applications. Spatial and temporal in situ diagnostics is employed to analyze light-matter interaction and, in combination with flexible digital-holographic beam sha** techniques, to find the optimal beam shape for the respective laser application. △ Less

Submitted 24 October, 2020; originally announced October 2020.

Comments: Conference Presentation (Photonics West 2019), Review article, 17 pages, 16 figures

Journal ref: Laser Resonators, Microresonators, and Beam Control XXI. Vol. 10904. International Society for Optics and Photonics, 2019

FCC-hh Experimental Insertion Region Design

Authors: Jose L. Abelleira, Robert B. Appleby, Sergey Arsenyev, Javier Barranco, Michael Benedikt, Maria Ilaria Besana, Oscar Blanco Garcia, Manuela Boscolo, David Boutin, Xavier Buffat, Helmut Burkhardt, Francesco Cerutti, Antoine Chance, Francesco Collamati, Emilia Cruz-Alaniz, Barbara Dalena, Michael Hofer, Barbara L. Humann, Angelo Infantino, Jacqueline Keintzel, Andy Langner, Marian Luckhof, Roman Martin, Tatiana Pieloni, Haroon Rafique , et al. (7 additional authors not shown)

Abstract: The Future Circular Collider study is exploring possible designs of circular colliders for the post-LHC era, as recommended by the European Strategy Group for High Energy Physics. One such option is FCC-hh, a proton-proton collider with a centre-of-mass energy of 100 TeV. The experimental insertion regions are key areas defining the performance of the collider. This paper presents the first insert… ▽ More The Future Circular Collider study is exploring possible designs of circular colliders for the post-LHC era, as recommended by the European Strategy Group for High Energy Physics. One such option is FCC-hh, a proton-proton collider with a centre-of-mass energy of 100 TeV. The experimental insertion regions are key areas defining the performance of the collider. This paper presents the first insertion region designs with a complete assessment of the main challenges, as collision debris with two orders of magnitude larger power than current colliders, beam-beam interactions in long insertions, dynamic aperture for optics with peak $β$ functions one order of magnitude above current colliders, photon background from synchrotron radiation and cross talk between the insertion regions. An alternative design avoiding the use of crab cavities with a small impact on performance is also presented. △ Less

Submitted 23 July, 2020; originally announced July 2020.

Comments: 74 pages

Nanostructure Accelerators: Novel concept and path to its realization

Authors: A. Sahai, M. Golkowski, F. Zimmermann, J. Resta-Lopez, T. Tajima, V. Shiltsev

Abstract: TeV/m acceleration gradients using crystals as originally envisioned by R. Hofstadter, an early pioneer of HEP, have remained unrealizable. Fundamental obstacles that have hampered efforts on particle acceleration using bulk-crystals arise from collisional energy loss and emittance degradation in addition to severe beam disruption despite the favorable effect of particle channeling along interatom… ▽ More TeV/m acceleration gradients using crystals as originally envisioned by R. Hofstadter, an early pioneer of HEP, have remained unrealizable. Fundamental obstacles that have hampered efforts on particle acceleration using bulk-crystals arise from collisional energy loss and emittance degradation in addition to severe beam disruption despite the favorable effect of particle channeling along interatomic planes in bulk. We aspire for the union of nanoscience with accelerator science to not only overcome these problems using nanostructured tubes to avoid direct impact of the beam on bulk ion-lattice but also to utilize the highly tunable characteristics of nanomaterials. We pioneer a novel surface wave mechanism in nanostructured materials with a strong electrostatic component which not only attains tens of TeV/m gradients but also has focusing fields. Under our initiative, the proof-of-principle demonstration of tens of TeV/m gradients and beam nanomodulation is underway. Realizable nanostructure accelerators naturally promise new horizons in HEP as well as in a wide range of areas of research that utilize beams of high-energy particles or photons. △ Less

Submitted 17 June, 2020; originally announced June 2020.

Comments: submission to Snowmass'21 Accelerator Frontier

Modern and Future Colliders

Authors: Vladimir Shiltsev, Frank Zimmermann

Abstract: Since the initial development of charged particle colliders in the middle of the 20th century, these advanced scientific instruments have been at the forefront of scientific discoveries in high energy physics. Collider accelerator technology and beam physics have progressed immensely and modern facilities now operate at energies and luminosities many orders of magnitude greater than the pioneering… ▽ More Since the initial development of charged particle colliders in the middle of the 20th century, these advanced scientific instruments have been at the forefront of scientific discoveries in high energy physics. Collider accelerator technology and beam physics have progressed immensely and modern facilities now operate at energies and luminosities many orders of magnitude greater than the pioneering colliders of the early 1960s. In addition, the field of colliders remains extremely dynamic and continues to develop many innovative approaches. Indeed, several novel concepts are currently being considered for designing and constructing even more powerful future colliders. In this paper, we first review the colliding beam method and the history of colliders, and then present the major achievements of operational machines and the key features of near-term collider projects that are currently under development. We conclude with an analysis of numerous proposals and studies for far-future colliders. The evaluation of their respective potentials reveals tantalizing prospects for further significant breakthroughs in the collider field. △ Less

Submitted 19 March, 2020; originally announced March 2020.

Comments: 65pages including references, 42 figures

Report number: FERMILAB-PUB-19-481-AD-APC

Journal ref: Rev. Mod. Phys. 93, 15006 (2021)

Beam Blow Up due to Beamstrahlung in Circular $e^+e^-$ Colliders

Authors: Marco Alan Valdivia García, Frank Zimmermann

Abstract: After the discovery of the Higgs boson at the Large Hadron Collider in 2012, several possible future circular colliders -- Higgs factories are proposed, such as FCC-ee and CEPC. At these highest-energy $e^+e^-$ colliders, beamstrahlung, namely the synchrotron radiation emitted in the field of the opposing beam, can greatly affect the equilibrium bunch length and energy spread. If the dispersion f… ▽ More After the discovery of the Higgs boson at the Large Hadron Collider in 2012, several possible future circular colliders -- Higgs factories are proposed, such as FCC-ee and CEPC. At these highest-energy $e^+e^-$ colliders, beamstrahlung, namely the synchrotron radiation emitted in the field of the opposing beam, can greatly affect the equilibrium bunch length and energy spread. If the dispersion function at the collision point is not zero, beamstrahlung will also increase the transverse emittances. In this letter, we first show that, for circular Higgs factories, a classical description of the beamstrahlung is adequate. We then derive analytical formulae describing the equilibrium beam parameters, taking into account the variation of the electromagnetic field during the collision. We illustrate the importance of beamstrahlung, including the increase of bunch length and the implied tolerance on the spurious dispersion function at the collision point, by considering a few examples. △ Less

Submitted 8 November, 2019; originally announced November 2019.

Polarization and Centre-of-mass Energy Calibration at FCC-ee

Authors: Alain Blondel, Patrick Janot, Jörg Wenninger, Ralf Aßmann, Sandra Aumon, Paolo Azzurri, Desmond P. Barber, Michael Benedikt, Anton V. Bogomyagkov, Eliana Gianfelice-Wendt, Dima El Kerchen, Ivan A. Koop, Mike Koratzinos, Evgeni Levitchev, Thibaut Lefevre, Attilio Milanese, Nickolai Muchnoi, Sergey A. Nikitin, Katsunobu Oide, Emmanuel Perez, Robert Rossmanith, David C. Sagan, Roberto Tenchini, Tobias Tydecks, Dmitry Shatilov , et al. (3 additional authors not shown)

Abstract: The first stage of the FCC (Future Circular Collider) is a high-luminosity electron-positron collider (FCC-ee) with centre-of-mass energy ranging from 88 to 365 GeV, to study with high precision the Z, W, Higgs and top particles, with samples of $5 \times 10^{12}$ Z bosons, $10^8$ W pairs, $10^6$ Higgs bosons and $10^6$ top quark pairs. A cornerstone of the physics program lays in the precise (ppm… ▽ More The first stage of the FCC (Future Circular Collider) is a high-luminosity electron-positron collider (FCC-ee) with centre-of-mass energy ranging from 88 to 365 GeV, to study with high precision the Z, W, Higgs and top particles, with samples of $5 \times 10^{12}$ Z bosons, $10^8$ W pairs, $10^6$ Higgs bosons and $10^6$ top quark pairs. A cornerstone of the physics program lays in the precise (ppm) measurements of the W and Z masses and widths, as well as forward-backward asymmetries. To this effect the centre-of-mass energy distribution should be determined with the high precision. This document describes the capacity offered by FCC-ee, starting with transverse polarization of the beams around the Z pole and the W pair threshold. A running scheme based on regular measurements of the beam energy by resonant depolarization of pilot bunches, during physics data taking, is proposed. The design for polarization wigglers, polarimeter and depolarizer is outlined. The $e^\pm$ beam energies will be monitored with a relative precision of $10^{-6}$. The centre-of-mass energy is derived subject to further corrections, related to the beam acceleration, synchrotron radiation and beamstrahlung; these effects are identified and evaluated. Dimuon events $e^+e^- \to μ^+ μ^-$, recorded in the detectors, provide with great precision the beam crossing angle, the centre-of-mass energy spread, and the $e^+$ and $e^-$ energy difference. Monitoring methods to minimize absolute error and relative uncertainties are discussed. The impact on the physics measurements is given. A programme of further simulations, design, monitoring and R&D is outlined. △ Less

Submitted 26 September, 2019; originally announced September 2019.

Comments: 107 pages, 15 tables, 58 figures

FCC-ee: Your Questions Answered

Authors: Alain Blondel, Patrick Janot, Niloufar Alipour Tehrani, Patrizia Azzi, Paolo Azzurri, Nicola Bacchetta, Michael Benedikt, Freya Blekman, Manuela Boscolo, Mogens Dam, Stefania De Curtis, David d'Enterria, John Ellis, Gerardo Ganis, Janusz Gluza, Clément Helsens, Staszek Jadach, Mike Koratzinos, Markus Klute, Christos Leonidopoulos, Elizabeth Locci, Michelangelo Mangano, Stéphane Monteil, Katsunobu Oide, Vitaly Okorokov , et al. (7 additional authors not shown)

Abstract: This document answers in simple terms many FAQs about FCC-ee, including comparisons with other colliders. It complements the FCC-ee CDR and the FCC Physics CDR by addressing many questions from non-experts and clarifying issues raised during the European Strategy symposium in Granada, with a view to informing discussions in the period between now and the final endorsement by the CERN Council in 20… ▽ More This document answers in simple terms many FAQs about FCC-ee, including comparisons with other colliders. It complements the FCC-ee CDR and the FCC Physics CDR by addressing many questions from non-experts and clarifying issues raised during the European Strategy symposium in Granada, with a view to informing discussions in the period between now and the final endorsement by the CERN Council in 2020 of the European Strategy Group recommendations. This document will be regularly updated as more questions appear or new information becomes available. △ Less

Submitted 6 June, 2019; originally announced June 2019.

Comments: Contribution to the European Particle Physics Strategy Update 2018-2020. Forty-five pages, six figures

Luminosity and Physics Considerations on HL-LHC and HE-LHC based mu-p Colliders

Authors: U. Kaya, B. Ketenoglu, S. Sultansoy, F. Zimmermann

Abstract: Construction of future Muon Collider tangential to the Large Hadron Collider will give opportunity to realize mu-p collisions at multi-TeV center of mass energies. Using nominal parameters of high luminosity and high energy upgrades of the LHC, as well as design parameters of muon colliders, it is shown that L_mu-p of order of 10^33 cm^-2s^-1 is achievable for different options with sqrt(s)_mu-p f… ▽ More Construction of future Muon Collider tangential to the Large Hadron Collider will give opportunity to realize mu-p collisions at multi-TeV center of mass energies. Using nominal parameters of high luminosity and high energy upgrades of the LHC, as well as design parameters of muon colliders, it is shown that L_mu-p of order of 10^33 cm^-2s^-1 is achievable for different options with sqrt(s)_mu-p from 4.58 TeV to 12.7 TeV. Certainly, proposed mu-p colliders have a huge potential for clarifying QCD basics and searches for new physics. △ Less

Submitted 4 November, 2021; v1 submitted 14 May, 2019; originally announced May 2019.

Machine detector interface for the $e^+e^-$ future circular collider

Authors: Manuela Boscolo, Oscar Blanco-Garcia, Nicola Bacchetta, Eleonora Belli, Michael Benedikt, Helmut Burkhardt, Miguel Gil Costa, Konrad Elsener, Emilia Leogrande, Patrick Janot, Herman Ten Kate, Dima El Khechen, Anna Kolano, Roberto Kersevan, Marian Lueckof, Katsunobu Oide, Emmanuel Perez, Nilou Teherani, O. Viazlo, Yorgos Voutsinas, Frank Zimmermann, Mogens Dam, Alain Blondel, M. Koratzinos, Alexander Novokhatski , et al. (5 additional authors not shown)

Abstract: The international Future Circular Collider (FCC) study aims at a design of $pp$, $e^+e^-$, $ep$ colliders to be built in a new 100 km tunnel in the Geneva region. The $e^+e^-$ collider (FCC-ee) has a centre of mass energy range between 90 (Z-pole) and 375 GeV (tt_bar). To reach such unprecedented energies and luminosities, the design of the interaction region is crucial. The crab-waist collision s… ▽ More The international Future Circular Collider (FCC) study aims at a design of $pp$, $e^+e^-$, $ep$ colliders to be built in a new 100 km tunnel in the Geneva region. The $e^+e^-$ collider (FCC-ee) has a centre of mass energy range between 90 (Z-pole) and 375 GeV (tt_bar). To reach such unprecedented energies and luminosities, the design of the interaction region is crucial. The crab-waist collision scheme has been chosen for the design and it will be compatible with all beam energies. In this paper we will describe the machine detector interface layout including the solenoid compensation scheme. We will describe how this layout fulfills all the requirements set by the parameters table and by the physical constraints. We will summarize the studies of the impact of the synchrotron radiation, the analysis of trapped modes and of the backgrounds induced by single beam and luminosity effects giving an estimate of the losses in the interaction region and in the detector. △ Less

Submitted 9 May, 2019; originally announced May 2019.

Comments: 6 pages, 7 figures, 62th ICFA ABDW on High Luminosity Circular $e^+e^-$ Colliders, eeFACT2018, Hong Kong, China

Report number: ISBN: 978-3-95450-216-5

Journal ref: JACoW Publishing (2018)

Beam-beam Blowup in the presence of x-y coupling sources at FCC-ee

Authors: Dima El Khechen, Katsunobu Oide, Frank Zimmermann

Abstract: FCC-ee, the lepton version of the Future Circular Collider (FCC), is a 100 Km future machine under study to be built at CERN. It acquires two experiments with a highest beam energy of 182.5 GeV. FCC-ee aims to operate at four different energies, with different luminosities to fulfil physics requirements. Beam-beam effects at such a high energy/luminosity machine are very challenging and require a… ▽ More FCC-ee, the lepton version of the Future Circular Collider (FCC), is a 100 Km future machine under study to be built at CERN. It acquires two experiments with a highest beam energy of 182.5 GeV. FCC-ee aims to operate at four different energies, with different luminosities to fulfil physics requirements. Beam-beam effects at such a high energy/luminosity machine are very challenging and require a deep understanding, especially in the presence of x-y coupling sources. Beam-beam effects include the beamstrahlung process, which limits the beam lifetime at high energies, as well as dynamic effects at the Interaction point (IP) which include changes in the beta functions and emittances. In this report, we will define the beam-beam effects and their behaviours in the FCC-ee highest energy lattice after introducing x-y coupling in the ring. △ Less

Submitted 23 April, 2019; originally announced April 2019.

Gamma Factory at CERN -- novel research tools made of light

Authors: W. Placzek, A. Abramov, S. E. Alden, R. Alemany Fernandez, P. S. Antsiferov, A. Apyan, H. Bartosik, E. G. Bessonov, N. Biancacci, J. Bieron, A. Bogacz, A. Bosco, R. Bruce, D. Budker, K. Cassou, F. Castelli, I. Chaikovska, C. Curatolo, P. Czodrowski, A. Derevianko, K. Dupraz, Y. Dutheil, K. Dzierzega, V. Fedosseev, N. Fuster Martinez , et al. (37 additional authors not shown)

Abstract: We discuss the possibility of creating novel research tools by producing and storing highly relativistic beams of highly ionised atoms in the CERN accelerator complex, and by exciting their atomic degrees of freedom with lasers to produce high-energy photon beams. Intensity of such photon beams would be by several orders of magnitude higher than offered by the presently operating light sources, in… ▽ More We discuss the possibility of creating novel research tools by producing and storing highly relativistic beams of highly ionised atoms in the CERN accelerator complex, and by exciting their atomic degrees of freedom with lasers to produce high-energy photon beams. Intensity of such photon beams would be by several orders of magnitude higher than offered by the presently operating light sources, in the particularly interesting gamma-ray energy domain of 0.1-400 MeV. In this energy range, the high-intensity photon beams can be used to produce secondary beams of polarised electrons, polarised positrons, polarised muons, neutrinos, neutrons and radioactive ions. New research opportunities in a wide domain of fundamental and applied physics can be opened by the Gamma Factory scientific programme based on the above primary and secondary beams. △ Less

Submitted 14 June, 2019; v1 submitted 21 March, 2019; originally announced March 2019.

Comments: 12 pages; presented by W. Placzek at the XXV Cracow Epiphany Conference on Advances in Heavy Ion Physics, 8-11 January 2019, Cracow, Poland

Scenarios for LHC/FCC Based Gamma-Proton Colliders

Authors: Zafer Nergiz, Saleh Sultansoy, Husnu Aksakal, Frank Zimmermann

Abstract: The advantage of the linac-ring type electron proton collider is that it allows for the straightforward construction of $γ$p collider. In a $γ$p collider high energy photons can be generated from Compton backscattering of laser photons off electrons from a linear accelerator. In this study main parameters of photon-proton colliders based on some future electron linear accelerator projects and prot… ▽ More The advantage of the linac-ring type electron proton collider is that it allows for the straightforward construction of $γ$p collider. In a $γ$p collider high energy photons can be generated from Compton backscattering of laser photons off electrons from a linear accelerator. In this study main parameters of photon-proton colliders based on some future electron linear accelerator projects and protons supplied form LHC or FCC are evaluated. △ Less

Submitted 5 April, 2019; v1 submitted 14 March, 2019; originally announced March 2019.

Comments: 11 pages, 13 figures

Machine Parameters and Projected Luminosity Performance of Proposed Future Colliders at CERN

Authors: Frederick Bordry, Michael Benedikt, Oliver Bruning, John Jowett, Lucio Rossi, Daniel Schulte, Steinar Stapnes, Frank Zimmermann

Abstract: In response to a request from the CERN Scientific Policy Committee (SPC), the machine parameters and expected luminosity performance for several proposed post-LHC collider projects at CERN are compiled: three types of hadron colliders (HL-LHC upgrade, FCC-hh and HE-LHC), a circular lepton collider (FCC-ee), a linear lepton collider (CLIC), and three options for lepton-hadron colliders (LHeC, HE-LH… ▽ More In response to a request from the CERN Scientific Policy Committee (SPC), the machine parameters and expected luminosity performance for several proposed post-LHC collider projects at CERN are compiled: three types of hadron colliders (HL-LHC upgrade, FCC-hh and HE-LHC), a circular lepton collider (FCC-ee), a linear lepton collider (CLIC), and three options for lepton-hadron colliders (LHeC, HE-LHeC, and FCC-eh). Particular emphasis is put on availability, physics run time, and efficiency. The information contained in this document was presented at the SPC Meeting of September 2018. It will serve as one of the inputs to the 2019/20 Update of the European Strategy for Particle Physics. △ Less

Submitted 30 October, 2018; originally announced October 2018.

Report number: CERN-ACC-2018-0037

Proton Colliders at the Energy Frontier

Authors: Michael Benedikt, Frank Zimmermann

Abstract: Since the CERN ISR, hadron colliders have defined the energy frontier. Noteworthy are the conversion of the Super Proton Synchrotron (SPS) into a proton-antiproton collider, the Tevatron collider, as well as the abandoned SSC in the United States. Hadron colliders are likely to determine the pace of particle-physics progress also during the next hundred years. Discoveries at past hadron colliders… ▽ More Since the CERN ISR, hadron colliders have defined the energy frontier. Noteworthy are the conversion of the Super Proton Synchrotron (SPS) into a proton-antiproton collider, the Tevatron collider, as well as the abandoned SSC in the United States. Hadron colliders are likely to determine the pace of particle-physics progress also during the next hundred years. Discoveries at past hadron colliders were essential for establishing the so-called Standard Model of particle physics. The world's present flagship collider, the LHC, including its high-luminosity upgrade HL-LHC, is set to operate through the second half of the 2030's. Further increases of the energy reach during the 21st century require another, still more powerful hadron collider. Three options for a next hadron collider are presently under investigation. The Future Circular Collider (FCC) study, hosted by CERN, is designing a 100 TeV collider, to be installed inside a new 100 km tunnel in the Lake Geneva basin. A similar 100 km collider, called SppC, is being pursued by CAS-IHEP in China. In either machine, for the first time in hadron storage rings, synchrotron radiation dam** will be significant. In parallel, the synchrotron-radiation power emitted inside the cold magnets becomes an important design constraint. One important difference between FCC and SppC is the magnet technology. FCC uses 16 Tesla magnets based on Nb3Sn superconductor, while SppC magnets shall be realized with cables made from iron-based high-temperature superconductor. Initially the SppC magnets are assumed to provide a more moderate dipole field of 12 T, but they can later be pushed to a final ultimate field of 24 T. A third collider presently under study is the High-Energy LHC (HE-LHC), which is a higher energy collider in the existing LHC tunnel, exploiting the FCC magnet technology in order to double the LHC energy at significantly higher luminosity. △ Less

Submitted 26 March, 2018; originally announced March 2018.

Comments: Submitted to Nucl. Instr. Methods A "Siegbahn 2017" issue

Future Colliders for Particle Physics - "Big and Small"

Authors: Frank Zimmermann

Abstract: Discoveries at high-energy particle colliders have established the standard model of particle physics. Technological innovation has helped to increase the collider energy at a much faster pace than the corresponding costs. New concepts will allow reaching ever higher luminosities and energies throughout the coming century. Cost-effective strategies for the collider implementation include staging.… ▽ More Discoveries at high-energy particle colliders have established the standard model of particle physics. Technological innovation has helped to increase the collider energy at a much faster pace than the corresponding costs. New concepts will allow reaching ever higher luminosities and energies throughout the coming century. Cost-effective strategies for the collider implementation include staging. For example, a future circular collider could first provide electron-positron collisions, then hadron collisions (proton-proton and heavy-ion), and finally the collision of muons. Cooling-free muon colliders, realizable in a number of ways, promise an attractive and energy-efficient path towards lepton collisions at tens of TeV. While plasma accelerators and dielectric accelerators offer unprecedented gradients, the construction of a high-energy collider based on these new technologies still calls for significant improvements in cost and performance. Pushing the accelerating gradients or bending fields ever further, the breakdown of the QED vacuum may set an ultimate limit to electromagnetic acceleration. Finally, some ideas are sketched for reaching, or exceeding, the Planck energy. △ Less

Submitted 9 January, 2018; originally announced January 2018.

Comments: Submitted to the proceedings of the Third European Advanced Accelerator Concepts Workshop "EAAC2017", La Biodola, 24-30 September 2017; to be published in NIMA Proceedings

Machine Layout and Performance

Authors: D. Angal-Kalinin, R. Appleby, G. Arduini, D. Banfi, J. Barranco, N. Biancacci, D. Brett, R. Bruce, O. Bruening, X. Buffat, A. Burov, Y. Cai, R. Calaga, A. Chancé, M. Crouch, B. Dalena, H. Day, R. de Maria, J. Esteban Muller, S. Fartoukh, M. Fitterer, O. Frasciello, M. Giovannozzi, W. Herr, W. Höfle , et al. (35 additional authors not shown)

Abstract: Chapter 2 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temper… ▽ More Chapter 2 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC. △ Less

Submitted 26 May, 2017; originally announced May 2017.

Comments: 40 pages, chapter 2 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report

Journal ref: CERN Yellow Report CERN 2015-005, pp. 21-60

PERLE: Powerful Energy Recovery Linac for Experiments - Conceptual Design Report

Authors: D. Angal-Kalinin, G. Arduini, B. Auchmann, J. Bernauer, A. Bogacz, F. Bordry, S. Bousson, C. Bracco, O. Brüning, R. Calaga, K. Cassou, V. Chetvertkova, E. Cormier, E. Daly, D. Douglas, K. Dupraz, B. Goddard, J. Henry, A. Hutton, E. Jensen, W. Kaabi, M. Klein, P. Kostka, F. Marhauser, A. Martens , et al. (17 additional authors not shown)

Abstract: A conceptual design is presented of a novel ERL facility for the development and application of the energy recovery technique to linear electron accelerators in the multi-turn, large current and large energy regime. The main characteristics of the powerful energy recovery linac experiment facility (PERLE) are derived from the design of the Large Hadron electron Collider, an electron beam upgrade u… ▽ More A conceptual design is presented of a novel ERL facility for the development and application of the energy recovery technique to linear electron accelerators in the multi-turn, large current and large energy regime. The main characteristics of the powerful energy recovery linac experiment facility (PERLE) are derived from the design of the Large Hadron electron Collider, an electron beam upgrade under study for the LHC, for which it would be the key demonstrator. PERLE is thus projected as a facility to investigate efficient, high current (> 10 mA) ERL operation with three re-circulation passages through newly designed SCRF cavities, at 801.58 MHz frequency, and following deceleration over another three re-circulations. In its fully equipped configuration, PERLE provides an electron beam of approximately 1 GeV energy. A physics programme possibly associated with PERLE is sketched, consisting of high precision elastic electron-proton scattering experiments, as well as photo-nuclear reactions of unprecedented intensities with up to 30 MeV photon beam energy as may be obtained using Fabry-Perot cavities. The facility has further applications as a general technology test bed that can investigate and validate novel superconducting magnets (beam induced quench tests) and superconducting RF structures (structure tests with high current beams, beam loading and transients). Besides a chapter on operation aspects, the report contains detailed considerations on the choices for the SCRF structure, optics and lattice design, solutions for arc magnets, source and injector and on further essential components. A suitable configuration derived from the here presented design concept may next be moved forward to a technical design and possibly be built by an international collaboration which is being established. △ Less

Submitted 24 May, 2017; originally announced May 2017.

Comments: 112 pages, 63 figures

Design of beam optics for the Future Circular Collider e+e- -collider rings

Authors: K. Oide, M. Aiba, S. Aumon, M. Benedikt, A. Blondel, A. Bogomyagkov, M. Boscolo, H. Burkhardt, Y. Cai, A. Doblhammer, B. Haerer, B. Holzer, J. M. Jowett, I. Koop, M. Koratzinos, E. Levichev, L. Medina, K. Ohmi, Y. Papaphilippou, P. Piminov, D. Shatilov, S. Sinyatkin, M. Sullivan, J. Wenninger, U. Wienands , et al. (2 additional authors not shown)

Abstract: A beam optics scheme has been designed for the Future Circular Collider-e+e- (FCC-ee). The main characteristics of the design are: beam energy 45 to 175 GeV, 100 km circumference with two interaction points (IPs) per ring, horizontal crossing angle of 30 mrad at the IP and the crab-waist scheme [1] with local chromaticity correction. The crab-waist scheme is implemented within the local chromatici… ▽ More A beam optics scheme has been designed for the Future Circular Collider-e+e- (FCC-ee). The main characteristics of the design are: beam energy 45 to 175 GeV, 100 km circumference with two interaction points (IPs) per ring, horizontal crossing angle of 30 mrad at the IP and the crab-waist scheme [1] with local chromaticity correction. The crab-waist scheme is implemented within the local chromaticity correction system without additional sextupoles, by reducing the strength of one of the two sextupoles for vertical chromatic correction at each side of the IP. So-called "tapering" of the magnets is applied, which scales all fields of the magnets according to the local beam energy to compensate for the effect of synchrotron radiation (SR) loss along the ring. An asymmetric layout near the interaction region reduces the critical energy of SR photons on the incoming side of the IP to values below 100 keV, while matching the geometry to the beam line of the FCC proton collider (FCC-hh) [2] as closely as possible. Sufficient transverse/longitudinal dynamic aperture (DA) has been obtained, including major dynamical effects, to assure an adequate beam lifetime in the presence of beamstrahlung and top-up injection. In particular, a momentum acceptance larger than +/-2% has been obtained, which is better than the momentum acceptance of typical collider rings by about a factor of 2. The effects of the detector solenoids including their compensation elements are taken into account as well as synchrotron radiation in all magnets. The optics presented in this paper is a step toward a full conceptual design for the collider. A number of issues have been identified for further study. △ Less

Submitted 23 October, 2016; originally announced October 2016.

The FCC-ee Interaction Region Magnet Design

Authors: M. Koratzinos, A. Blondel, A. Bogomyagkov, S. Sinyatkin, M. Benedikt, B. Holzer, J. van Nugteren, F. Zimmermann, K. Oide

Abstract: The design of the region close to the interaction point of the FCC-ee experiments is especially challenging. The beams collide at an angle (+-15 mrad) in the high-field region of the detector solenoid. Moreover, the very low vertical beta_y* of the machine necessitates that the final focusing quadrupoles have a distance from the IP (L*) of around 2 m and therefore are inside the main detector sole… ▽ More The design of the region close to the interaction point of the FCC-ee experiments is especially challenging. The beams collide at an angle (+-15 mrad) in the high-field region of the detector solenoid. Moreover, the very low vertical beta_y* of the machine necessitates that the final focusing quadrupoles have a distance from the IP (L*) of around 2 m and therefore are inside the main detector solenoid. The beams should be screened from the effect of the detector magnetic field, and the emittance blow-up due to vertical dispersion in the interaction region should be minimized, while leaving enough space for detector components. Crosstalk between the two final focus quadrupoles, only about 6 cm apart at the tip, should also be minimized. △ Less

Submitted 19 July, 2016; originally announced July 2016.

Comments: Poster presented at IPAC16, May 8-13, Busan, Korea

Report number: THPOR023

Path to AWAKE: Evolution of the concept

Authors: A. Caldwell, E. Adli, L. Amorim, R. Apsimon, T. Argyropoulos, R. Assmann, A. -M. Bachmann, F. Batsch, J. Bauche, V. K. Berglyd Olsen, M. Bernardini, R. Bingham, B. Biskup, T. Bohl, C. Bracco, P. N. Burrows, G. Burt, B. Buttenschon, A. Butterworth, M. Cascella, S. Chattopadhyay, E. Chevallay, S. Cipiccia, H. Damerau, L. Deacon , et al. (96 additional authors not shown)

Abstract: This report describes the conceptual steps in reaching the design of the AWAKE experiment currently under construction at CERN. We start with an introduction to plasma wakefield acceleration and the motivation for using proton drivers. We then describe the self-modulation instability --- a key to an early realization of the concept. This is then followed by the historical development of the experi… ▽ More This report describes the conceptual steps in reaching the design of the AWAKE experiment currently under construction at CERN. We start with an introduction to plasma wakefield acceleration and the motivation for using proton drivers. We then describe the self-modulation instability --- a key to an early realization of the concept. This is then followed by the historical development of the experimental design, where the critical issues that arose and their solutions are described. We conclude with the design of the experiment as it is being realized at CERN and some words on the future outlook. A summary of the AWAKE design and construction status as presented in this conference is given in [1]. △ Less

Submitted 29 November, 2015; originally announced November 2015.

Comments: 15 pages, 24 figures, 1 table, 111 references, 121 author from 36 organizations

Demonstration of local teleportation using classical entanglement

Authors: Diego Guzman-Silva, Robert Brüning, Felix Zimmermann, Christian Vetter, Markus Gräfe, Matthias Heinrich, Stefan Nolte, Michael Duparré, Andrea Aiello, Marco Ornigotti, Alexander Szameit

Abstract: Teleportation is the most widely discussed application of the basic principles of quantum mechanics. Fundamentally, this process describes the transmission of information, which involves transport of neither matter nor energy. The implicit assumption, however, is that this scheme is of inherently nonlocal nature, and therefore exclusive to quantum systems. Here, we show that the concept can be rea… ▽ More Teleportation is the most widely discussed application of the basic principles of quantum mechanics. Fundamentally, this process describes the transmission of information, which involves transport of neither matter nor energy. The implicit assumption, however, is that this scheme is of inherently nonlocal nature, and therefore exclusive to quantum systems. Here, we show that the concept can be readily generalized beyond the quantum realm. We present an optical implementation of the teleportation protocol solely based on classical entanglement between spatial and modal degrees of freedom, entirely independent of nonlocality. Our findings could enable novel methods for distributing information between different transmission channels and may provide the means to leverage the advantages of both quantum and classical systems to create a robust hybrid communication infrastructure. △ Less

Submitted 28 September, 2015; v1 submitted 21 September, 2015; originally announced September 2015.

Status and Challenges for FCC-ee

Authors: Michael Benedikt, Katsunobu Oide, Frank Zimmermann, Anton Bogomyagkov, Eugene Levichev, Mauro Migliorati, Uli Wienands

Abstract: We report the design status and beam dynamics challenges for the electron-positron branch of the Future Circular Collider (FCC) study, as of August 2015. After recalling motivation and physics requirements for the FCC-ee, we briefly discuss configurations and parameters, collider layout, the superconducting RF system, possible staging scenarios, final-focus optics, interaction-region (IR) issues,… ▽ More We report the design status and beam dynamics challenges for the electron-positron branch of the Future Circular Collider (FCC) study, as of August 2015. After recalling motivation and physics requirements for the FCC-ee, we briefly discuss configurations and parameters, collider layout, the superconducting RF system, possible staging scenarios, final-focus optics, interaction-region (IR) issues, machine detector interface and IR synchrotron radiation, dynamic aperture, beam-beam effects, top-up injection, mono-chromatization option, impedances, instabilities, energy calibration and polarization, and SuperKEKB as a key demonstrator, before presenting conclusions and outlook. △ Less

Submitted 13 August, 2015; originally announced August 2015.

Comments: Combination of two articles invited for the ICFA Beam Dynamics Newsletter, September 2015 issue

FCC-ee: Energy calibration

Authors: M. Koratzinos, A. Blondel, E. Gianfelice-Wendt, F. Zimmermann

Abstract: The FCC-ee aims to improve on electroweak precision measurements, with goals of 100 keV on the Z mass and width, and a fraction of MeV on the W mass. Compared to LEP, this implies a much improved knowledge of the centre-of-mass energy when operating at the Z peak and WW threshold. This can be achieved by making systematic use of resonant depolarization. A number of issues have been identified, due… ▽ More The FCC-ee aims to improve on electroweak precision measurements, with goals of 100 keV on the Z mass and width, and a fraction of MeV on the W mass. Compared to LEP, this implies a much improved knowledge of the centre-of-mass energy when operating at the Z peak and WW threshold. This can be achieved by making systematic use of resonant depolarization. A number of issues have been identified, due in particular to the long polarization times. However the smaller emittance and energy spread of FCC-ee with respect to LEP should help achieve a much improved performance. △ Less

Submitted 2 June, 2015; originally announced June 2015.

Comments: Poster presented at IPAC'15, Richmond, VA, USA, May 2015. arXiv admin note: substantial text overlap with arXiv:1501.06856

Report number: TUPTY063

Mitigating performance limitations of single beam-pipe circular e+e- colliders

Authors: M. Koratzinos, F. Zimmermann

Abstract: Renewed interest in circular e+e- colliders has spurred designs of single beam-pipe machines, like the CEPC in China, and double beam pipe ones, such as the FCC-ee effort at CERN. Single beam-pipe designs profit from lower costs but are limited by the number of bunches that can be accommodated in the machine. We analyse these performance limitations and propose a solution that can accommodate O(10… ▽ More Renewed interest in circular e+e- colliders has spurred designs of single beam-pipe machines, like the CEPC in China, and double beam pipe ones, such as the FCC-ee effort at CERN. Single beam-pipe designs profit from lower costs but are limited by the number of bunches that can be accommodated in the machine. We analyse these performance limitations and propose a solution that can accommodate O(1000) bunches while kee** more than 90% of the ring with a single beam pipe. △ Less

Submitted 2 June, 2015; originally announced June 2015.

Comments: Poster presented at IPAC'15, Richmond, VA, USA, May 2015

Report number: TUPTY058

The FCC-ee study: Progress and challenges

Authors: M. Koratzinos, A. Blondel, S. Aumon, C. Cook, A. Doblhammer, B. Haerer, B. Holzer, R. Tomas, F. Zimmermann, U. Wienands, L. Medina, M. Boscolo, A. Bogomyagkov, D. Shatilov, E. Levichev

Abstract: The FCC (Future Circular Collider) study represents a vision for the next large project in high energy physics, comprising an 80-100 km tunnel that can house a future 100 TeV hadron collider. The study also includes a high luminosity e+e- collider operating in the centre-of-mass energy range of 90-350 GeV as a possible intermediate step, the FCC-ee. The FCC-ee aims at definitive electro-weak preci… ▽ More The FCC (Future Circular Collider) study represents a vision for the next large project in high energy physics, comprising an 80-100 km tunnel that can house a future 100 TeV hadron collider. The study also includes a high luminosity e+e- collider operating in the centre-of-mass energy range of 90-350 GeV as a possible intermediate step, the FCC-ee. The FCC-ee aims at definitive electro-weak precision measurements of the Z, W, H and top particles, and search for rare phenomena. Although FCC-ee is based on known technology, the goal performance in luminosity and energy calibration make it quite challenging. During 2014 the study went through an exploration phase. The study has now entered its second year and the aim is to produce a conceptual design report during the next three to four years. We here report on progress since the last IPAC conference. △ Less

Submitted 2 June, 2015; originally announced June 2015.

Comments: Poster presented at IPAC15,Richmond, VA, USA, May 2015

Report number: TUPTY060

10 Years of wire excitation experiments in the CERN SPS

Authors: F. Zimmermann

Abstract: This paper reviews the set-up, experimental studies, and beam observations with one or two prototype long-range beam-beam 'wire' compensators in the CERN SPS from 2002 to 2012. This paper reviews the set-up, experimental studies, and beam observations with one or two prototype long-range beam-beam 'wire' compensators in the CERN SPS from 2002 to 2012. △ Less

Submitted 14 October, 2014; originally announced October 2014.

Comments: 14 pages, contribution to the ICFA Mini-Workshop on Beam-Beam Effects in Hadron Colliders, CERN, Geneva, Switzerland, 18-22 Mar 2013

Journal ref: CERN Yellow Report CERN-2014-004, pp.153-166

Experimental and Theoretical Progress of Linear Collider Final Focus Design and ATF2 Facility

Authors: Andrei Seryi, Rogelio Tomas, Frank Zimmermann, Kiyoshi Kubo, Shigeru Kuroda, Toshiyuki Okugi, Toshiaki Tauchi, Nobuhiro Terunuma, Junji Urakawa, Glen White, Mark Woodley, Deepa Angal-Kalinin

Abstract: In this brief overview we will reflect on the process of the design of the linear collider (LC) final focus (FF) optics, and will also describe the theoretical and experimental efforts on design and practical realisation of a prototype of the LC FF optics implemented in the ATF2 facility at KEK, Japan, presently being commissioned and operated. In this brief overview we will reflect on the process of the design of the linear collider (LC) final focus (FF) optics, and will also describe the theoretical and experimental efforts on design and practical realisation of a prototype of the LC FF optics implemented in the ATF2 facility at KEK, Japan, presently being commissioned and operated. △ Less

Submitted 8 April, 2014; originally announced April 2014.

Journal ref: Nuclear Inst. and Methods in Physics Research A 740 (2014) 2-5

Proceedings of ECLOUD'12: Joint INFN-CERN-EuCARD-AccNet Workshop on Electron-Cloud Effects, La Biodola, Isola d'Elba, Italy, 5 - 9 Jun 2012

Authors: Roberto Cimino, Giovanni Rumolo, Frank Zimmermann

Abstract: This report contains the Proceedings of the Joint INFN-Frascati, INFN-Pisa, CERN-LER and EuCARD-AccNet Mini-Workshop on Electron-Cloud Effects, "ECLOUD12", held at La Biodola, Isola d'Elba, from 5 to 9 June 2012. The ECLOUD12 workshop reviewed many recent electron-cloud (EC) observations at existing storage rings, EC predictions for future accelerators, electron-cloud studies at DAFNE, EC mitigati… ▽ More This report contains the Proceedings of the Joint INFN-Frascati, INFN-Pisa, CERN-LER and EuCARD-AccNet Mini-Workshop on Electron-Cloud Effects, "ECLOUD12", held at La Biodola, Isola d'Elba, from 5 to 9 June 2012. The ECLOUD12 workshop reviewed many recent electron-cloud (EC) observations at existing storage rings, EC predictions for future accelerators, electron-cloud studies at DAFNE, EC mitigation by clearing electrodes and graphite/carbon coatings, modeling of incoherent EC effects, self-consistent simulations, synergies with other communities like the Valencia Space Consortium and the European Space Agency. ECLOUD12 discussed new EC observations at existing machines including LHC, CesrTA, PETRA-3, J-PARC, and FNAL MI; latest experimental efforts to characterize the EC - including EC diagnostics, experimental techniques, mitigation techniques such as coating and conditioning, advanced chemical and physical analyses of various vacuum-chamber surfaces, beam instabilities and emittance growth -; the status of EC physics models and (new, more versatile and additional) simulation codes and their comparison with recently acquired experimental data; and the mitigation requirements and potential performance limitations imposed by the EC on upgraded and future machines, including HL-LHC, FAIR, ILC, Project-X, SuperB and SuperKEKB. A dedicated session addressed problems related to RF breakdown and multipacting for space applications. A number of open questions and future R&D needs were identified. △ Less

Submitted 13 March, 2014; originally announced March 2014.

Comments: 39 lectures, 286 pages, published as CERN Yellow Report https://cds.cern.ch/record/1529710?ln=en

Report number: CERN-2013-002, EuCARD-CON-2013-001, INFN-12-26-LNF