-
Tokamak H-mode edge-SOL global turbulence simulations with an electromagnetic, transcollisional drift-fluid model
Authors:
W. Zholobenko,
K. Zhang,
A. Stegmeir,
J. Pfennig,
K. Eder,
C. Pitzal,
P. Ulbl,
M. Griener,
L. Radovanovic,
U. Plank,
ASDEX Upgrade Team
Abstract:
The design of commercially feasible magnetic confinement fusion reactors strongly relies on the reduced turbulent transport in the plasma edge during operation in the high confinement mode (H-mode). We present first global turbulence simulations of the ASDEX Upgrade tokamak edge and scrape-off layer (SOL) in ITER baseline H-mode conditions. Reasonable agreement with the experiment is obtained for…
▽ More
The design of commercially feasible magnetic confinement fusion reactors strongly relies on the reduced turbulent transport in the plasma edge during operation in the high confinement mode (H-mode). We present first global turbulence simulations of the ASDEX Upgrade tokamak edge and scrape-off layer (SOL) in ITER baseline H-mode conditions. Reasonable agreement with the experiment is obtained for outboard mid-plane measurements of plasma density, electron and ion temperature, as well as the radial electric field. The radial heat transport is underpredicted by roughly a factor 2. These results were obtained with the GRILLIX code implementing a transcollisional, electromagnetic, global drift-fluid plasma model, coupled to diffusive neutrals. The transcollisional extensions include neoclassical corrections for the ion viscosity, as well as either a Landau-fluid or free-streaming limited model for the parallel heat conduction. Electromagnetic fluctuations are found to play a critical role in H-mode conditions. We investigate the structure of the significant $E \times B$ flow shear, finding both neoclassical components as well as zonal flows. But unlike in L-mode, geodesic acoustic modes are not observed. The turbulence mode structure is mostly that of drift-Alfvén waves. However, in the upper part of the pedestal, it is very weak and overshadowed by neoclassical transport. At the pedestal foot, on the other hand, we find instead the (electromagnetic) kinetic ballooning mode (KBM), most clearly just inside the separatrix. Our results pave the way towards predictive simulations of fusion reactors.
△ Less
Submitted 15 March, 2024;
originally announced March 2024.
-
Reduced model for H-mode sustainment in unfavorable $\mathbf{ \nabla B}$ drift configuration in ASDEX Upgrade
Authors:
O. Grover,
T. Eich,
P. Manz,
W. Zholobenko,
T. Happel,
T. Body,
U. Plank,
P. Ulbl,
ASDEX Upgrade team
Abstract:
A recently developed reduced model of H-mode sustainment based on interchange-drift-Alfvén turbulence description in the vicinity of the separatrix matching experimental observations in ASDEX Upgrade has been extended to experiments with the unfavorable $\nabla B$ drift. The combination with the theory of the magnetic-shear-induced Reynolds stress offers a possibility to quantitatively explain the…
▽ More
A recently developed reduced model of H-mode sustainment based on interchange-drift-Alfvén turbulence description in the vicinity of the separatrix matching experimental observations in ASDEX Upgrade has been extended to experiments with the unfavorable $\nabla B$ drift. The combination with the theory of the magnetic-shear-induced Reynolds stress offers a possibility to quantitatively explain the phenomena. The extension of the Reynolds stress estimate in the reduced model via the magnetic shear contribution is able to reproduce the strong asymmetry in the access conditions depending on the ion $\nabla B$ drift orientation in agreement with experimental observations. The Reynolds stress profile asymmetry predicted by the magnetic shear model is further extended by comparison with GRILLIX and GENE-X simulations matched with comparable experiments in realistic X-point geometry. The predictions of the radial electric field well depth and its difference between the favorable and unfavorable configurations at the same heating power from the extended model also show consistency with experimental measurements.
△ Less
Submitted 19 October, 2023; v1 submitted 17 October, 2023;
originally announced October 2023.
-
Magnetic flutter effect on validated edge turbulence simulations
Authors:
Kaiyu Zhang,
Wladimir Zholobenko,
Andreas Stegmeir,
Konrad Eder,
Frank Jenko
Abstract:
Small magnetic fluctuations ($B_1/B_0 \sim 10^{-4}$) are intrinsically present in a magnetic confinement plasma due to turbulent currents. While the perpendicular transport of particles and heat is typically dominated by fluctuations of the electric field, the parallel stream of plasma is affected by fluttering magnetic field lines. In particular through electrons, this indirectly impacts the turb…
▽ More
Small magnetic fluctuations ($B_1/B_0 \sim 10^{-4}$) are intrinsically present in a magnetic confinement plasma due to turbulent currents. While the perpendicular transport of particles and heat is typically dominated by fluctuations of the electric field, the parallel stream of plasma is affected by fluttering magnetic field lines. In particular through electrons, this indirectly impacts the turbulence dynamics. Even in low beta conditions, we find that $E\times B$ turbulent transport can be reduced by more than a factor 2 when magnetic flutter is included in our validated edge turbulence simulations of L-mode ASDEX Upgrade. The primary reason for this is the stabilization of drift-Alfvén-waves, which reduces the phase shifts of density and temperature fluctuations with respect to potential fluctuations. This stabilization can be qualitatively explained by linear analytical theory, and appreciably reinforced by the flutter nonlinearity. As a secondary effect, the steeper temperature gradients and thus higher $η_i$ increase the impact of the ion-temperature-gradient mode on overall turbulent transport. With increasing beta, the stabilizing effect on $E\times B$ turbulence increases, balancing the destabilization by induction, until direct electromagnetic perpendicular transport is triggered. We conclude that including flutter is crucial for predictive edge turbulence simulations.
△ Less
Submitted 14 September, 2023;
originally announced September 2023.
-
Deep modelling of plasma and neutral fluctuations from gas puff turbulence imaging
Authors:
A. Mathews,
J. L. Terry,
S. G. Baek,
J. W. Hughes,
A. Q. Kuang,
B. LaBombard,
M. A. Miller,
D. Stotler,
D. Reiter,
W. Zholobenko,
M. Goto
Abstract:
The role of turbulence in setting boundary plasma conditions is presently a key uncertainty in projecting to fusion energy reactors. To robustly diagnose edge turbulence, we develop and demonstrate a technique to translate brightness measurements of HeI line radiation into local plasma fluctuations via a novel integrated deep learning framework that combines neutral transport physics and collision…
▽ More
The role of turbulence in setting boundary plasma conditions is presently a key uncertainty in projecting to fusion energy reactors. To robustly diagnose edge turbulence, we develop and demonstrate a technique to translate brightness measurements of HeI line radiation into local plasma fluctuations via a novel integrated deep learning framework that combines neutral transport physics and collisional radiative theory for the $3^3 D - 2^3 P$ transition in atomic helium. The tenets for experimental validity are reviewed, illustrating that this turbulence analysis for ionized gases is transferable to both magnetized and unmagnetized environments with arbitrary geometries. Based upon fast camera data on the Alcator C-Mod tokamak, we present the first 2-dimensional time-dependent experimental measurements of the turbulent electron density, electron temperature, and neutral density revealing shadowing effects in a fusion plasma using a single spectral line.
△ Less
Submitted 19 May, 2022; v1 submitted 24 January, 2022;
originally announced January 2022.
-
Validation of edge turbulence codes against the TCV-X21 diverted L-mode reference case
Authors:
D. S. Oliveira,
T. Body,
D. Galassi,
C. Theiler,
E. Laribi,
P. Tamain,
A. Stegmeir,
M. Giacomin,
W. Zholobenko,
P. Ricci,
H. Bufferand,
J. A. Boedo,
G. Ciraolo,
C. Colandrea,
D. Coster,
H. de Oliveira,
G. Fourestey,
S. Gorno,
F. Imbeaux,
F. Jenko,
V. Naulin,
N. Offeddu,
H. Reimerdes,
E. Serre,
C. K. Tsui
, et al. (5 additional authors not shown)
Abstract:
Self-consistent full-size turbulent-transport simulations of the divertor and SOL of existing tokamaks have recently become feasible. This enables the direct comparison of turbulence simulations against experimental measurements. In this work, we perform a series of diverted Ohmic L-mode discharges on the TCV tokamak, building a first-of-a-kind dataset for the validation of edge turbulence models.…
▽ More
Self-consistent full-size turbulent-transport simulations of the divertor and SOL of existing tokamaks have recently become feasible. This enables the direct comparison of turbulence simulations against experimental measurements. In this work, we perform a series of diverted Ohmic L-mode discharges on the TCV tokamak, building a first-of-a-kind dataset for the validation of edge turbulence models. This dataset, referred to as TCV-X21, contains measurements from 5 diagnostic systems -- giving a total of 45 1- and 2-D comparison observables in two toroidal magnetic field directions. The dataset is used to validate three flux-driven 3D fluid-turbulence models: GBS, GRILLIX and TOKAM3X. With each model, we perform simulations of the TCV-X21 scenario, tuning the particle and power source rates to achieve a reasonable match of the upstream separatrix value of density and electron temperature. We find that the simulations match the experimental profiles for most observables at the OMP -- both in terms of profile shape and absolute magnitude -- while a poorer agreement is found towards the divertor targets. The match between simulation and experiment is seen to be sensitive to the value of the resistivity, the heat conductivities, the power injection rate and the choice of sheath boundary conditions. Additionally, despite targeting a sheath-limited regime, the discrepancy between simulations and experiment also suggests that the neutral dynamics should be included. The results of this validation show that turbulence models are able to perform simulations of existing devices and achieve reasonable agreement with experimental measurements. Where disagreement is found, the validation helps to identify how the models can be improved. By publicly releasing the experimental dataset, this work should help to guide and accelerate the development of predictive turbulence simulations of the edge and SOL.
△ Less
Submitted 29 November, 2021; v1 submitted 3 September, 2021;
originally announced September 2021.
-
Treatment of Advanced Divertor Configurations in the Flux-Coordinate Independent turbulence code GRILLIX
Authors:
Thomas Body,
Andreas Stegmeir,
Wladimir Zholobenko,
David Coster,
Frank Jenko
Abstract:
Advanced divertor configurations modify the magnetic geometry of the diverter to achieve a combination of strong magnetic flux expansion, increased connection length and higher divertor volume - to improve detachment stability, neutral/impurity confinement and heat-channel broadening. In this paper, we discuss the modification of the Flux-Coordinate Independent (FCI) turbulence code GRILLIX to tre…
▽ More
Advanced divertor configurations modify the magnetic geometry of the diverter to achieve a combination of strong magnetic flux expansion, increased connection length and higher divertor volume - to improve detachment stability, neutral/impurity confinement and heat-channel broadening. In this paper, we discuss the modification of the Flux-Coordinate Independent (FCI) turbulence code GRILLIX to treat generalised magnetic geometry, to allow for the investigation of the effect of magnetic geometry on turbulent structures in the edge and SOL. The development of grids and parallel operators from numerically-defined magnetic equilibria is discussed, as is the application of boundary conditions via penalisation, with the finite-width method generalised to treat complex non-conformal boundaries. Initial testing of hyperbolic (advection) and parabolic (diffusion) test cases is presented for the Snowflake scenario.
△ Less
Submitted 13 August, 2019;
originally announced August 2019.
-
Global turbulence simulations of the tokamak edge region with GRILLIX
Authors:
A. Stegmeir,
A. Ross,
T. Body,
M. Francisquez,
W. Zholobenko,
D. Coster,
O. Maj,
P. Manz,
F. Jenko,
B. N. Rogers,
K. S. Kang
Abstract:
Turbulent dynamics in the scrape-off layer (SOL) of magnetic fusion devices is intermittent with large fluctuations in density and pressure. Therefore, a model is required that allows perturbations of similar or even larger magnitude to the time-averaged background value. The fluid-turbulence code GRILLIX is extended to such a global model, which consistently accounts for large variation in plasma…
▽ More
Turbulent dynamics in the scrape-off layer (SOL) of magnetic fusion devices is intermittent with large fluctuations in density and pressure. Therefore, a model is required that allows perturbations of similar or even larger magnitude to the time-averaged background value. The fluid-turbulence code GRILLIX is extended to such a global model, which consistently accounts for large variation in plasma parameters. Derived from the drift reduced Braginskii equations, the new GRILLIX model includes electromagnetic and electron-thermal dynamics, retains global parametric dependencies and the Boussinesq approximation is not applied. The penalisation technique is combined with the flux-coordinate independent (FCI) approach [F. Hariri and M. Ottaviani, Comput.Phys.Commun. 184:2419, (2013); A. Stegmeir et al., Comput.Phys.Commun. 198:139, (2016)], which allows to study realistic diverted geometries with X-point(s) and general boundary contours. We characterise results from turbulence simulations and investigate the effect of geometry by comparing simulations in circular geometry with toroidal limiter against realistic diverted geometry at otherwise comparable parameters. Turbulence is found to be intermittent with relative fluctuation levels of up to 40% showing that a global description is indeed important. At the same time via direct comparison, we find that the Boussinesq approximation has only a small quantitative impact in a turbulent environment. In comparison to circular geometry the fluctuations are reduced in diverted geometry, which is related to a different zonal flow structure. Moreover, the fluctuation level has a more complex spatial distribution in diverted geometry. Due to local magnetic shear, which differs fundamentally in circular and diverted geometry, turbulent structures become strongly distorted in the perpendicular direction and are eventually damped away towards the X-point.
△ Less
Submitted 19 April, 2019;
originally announced April 2019.