Showing 1–50 of 69 results for author: Zhao, F

On-liquid-gallium surface synthesis of ultra-smooth conductive metal-organic framework thin films

Authors: **xin Liu, Yunxu Chen, Xing Huang, Yanhan Ren, Mike Hambsch, David Bodesheim, Darius Pohl, Xiaodong Li, Marielle Deconinck, Bowen Zhang, Markus Löffler, Zhongquan Liao, Fengxiang Zhao, Arezoo Dianat, Gianaurelio Cuniberti, Yana Vaynzof, Junfeng Gao, **gcheng Hao, Stefan C. B. Mannsfeld, Xinliang Feng, Renhao Dong

Abstract: Conductive metal-organic frameworks (MOFs) are emerging electroactive materials for (opto-)electronics. However, it remains a great challenge to achieve reliable MOF-based devices via the existing synthesis methods that are compatible with the complementary metal-oxide-semiconductor technology, as the surface roughness of thus-far synthetic MOF films or pellets is rather high for efficient electro… ▽ More Conductive metal-organic frameworks (MOFs) are emerging electroactive materials for (opto-)electronics. However, it remains a great challenge to achieve reliable MOF-based devices via the existing synthesis methods that are compatible with the complementary metal-oxide-semiconductor technology, as the surface roughness of thus-far synthetic MOF films or pellets is rather high for efficient electrode contact. Here, we develop an on-liquid-gallium surface synthesis (OLGSS) strategy under chemical vapor deposition (CVD) conditions for the controlled growth of two-dimensional conjugated MOF (2D c-MOF) thin films with ten-fold improvement of surface flatness (surface roughness can reach as low as ~2 Å) compared with MOF films grown by the traditional methods. Supported by theoretical modeling, we unveil a layer-by-layer CVD growth mode for constructing flattening surfaces, that is triggered by the high adhesion energy between gallium (Ga) and planar aromatic ligands. We further demonstrate the generality of the as-proposed OLGSS strategy by reproducing such a flat surface over nine different 2D c-MOF films with variable thicknesses (~2 to 208 nm) and large lateral sizes (over 1 cm2). The resultant ultra-smooth 2D c-MOF films enable the formation of high-quality electrical contacts with gold (Au) electrodes, leading to a reduction of contact resistance by over ten orders of magnitude compared to the traditional uneven MOF films. Furthermore, due to the efficient interfacial interaction benifited from the high-quality contacts, the prepared van der Waals heterostructure (vdWH) of OLGSS c-MOF and MoS2 exhibits intriguing photoluminescence (PL) enhancement, PL peak shift and large work function modulation. The establishment of the reliable OLGSS method provides the chances to push the development of MOF electronics and the construction of multicomponent MOF-based heterostructure materials. △ Less

Submitted 17 April, 2024; originally announced April 2024.

Single-shot deterministic complex amplitude imaging with a single-layer metalens

Authors: Liu Li, Shuai Wang, Feng Zhao, Yixin Zhang, Shun Wen, Huichao Chai, Yunhui Gao, Wenhui Wang, Liangcai Cao, Yuanmu Yang

Abstract: Conventional imaging systems can only capture light intensity. Meanwhile, the lost phase information may be critical for a variety of applications such as label-free microscopy and optical metrology. Existing phase retrieval techniques typically require a bulky setup, multi-frame measurements, or prior information of the target scene. Here, we proposed an extremely compact system for complex ampli… ▽ More Conventional imaging systems can only capture light intensity. Meanwhile, the lost phase information may be critical for a variety of applications such as label-free microscopy and optical metrology. Existing phase retrieval techniques typically require a bulky setup, multi-frame measurements, or prior information of the target scene. Here, we proposed an extremely compact system for complex amplitude imaging, leveraging the extreme versatility of a single-layer metalens to generate spatially-multiplexed and polarization-phase-shifted point spread functions. Combining the metalens with a polarization camera, the system can simultaneously record four polarization shearing interference patterns along both in-plane directions, thus allowing the deterministic reconstruction of the complex amplitude light field in a single shot. Using an incoherent light-emitting diode as the illumination, we experimentally demonstrated speckle-noise-free complex amplitude imaging for both static and moving objects with tailored magnification ratio and field-of-view. The miniaturized and robust system may open the door for complex amplitude imaging in portable devices for point-of-care applications. △ Less

Submitted 27 September, 2023; originally announced September 2023.

Optical tuning of the diamond Fermi level measured by correlated scanning probe microscopy and quantum defect spectroscopy

Authors: Christian Pederson, Rajiv Giridharagopal, Fang Zhao, Scott T. Dunham, Yevgeny Raitses, David S. Ginger, Kai-Mei C. Fu

Abstract: Quantum technologies based on quantum point defects in crystals require control over the defect charge state. Here we tune the charge state of shallow nitrogen-vacancy and silicon-vacancy centers by locally oxidizing a hydrogenated surface with moderate optical excitation and simultaneous spectral monitoring. The loss of conductivity and change in work function due to oxidation are measured in atm… ▽ More Quantum technologies based on quantum point defects in crystals require control over the defect charge state. Here we tune the charge state of shallow nitrogen-vacancy and silicon-vacancy centers by locally oxidizing a hydrogenated surface with moderate optical excitation and simultaneous spectral monitoring. The loss of conductivity and change in work function due to oxidation are measured in atmosphere using conductive atomic force microscopy (C-AFM) and Kelvin probe force microscopy (KPFM). We correlate these scanning probe measurements with optical spectroscopy of the nitrogen-vacancy and silicon-vacancy centers created via implantation and annealing 15-25 nm beneath the diamond surface. The observed charge state of the defects as a function of optical exposure demonstrates that laser oxidation provides a way to precisely tune the Fermi level over a range of at least 2.00 eV. We also observe a significantly larger oxidation rate for implanted surfaces compared to unimplanted surfaces under ambient conditions. Combined with knowledge of the electron affinity of a surface, these results suggest KPFM is a powerful, high-spatial resolution technique to advance surface Fermi level engineering for charge stabilization of quantum defects. △ Less

Submitted 27 September, 2023; originally announced September 2023.

Semidiscrete optical vortex droplets in quasi-phase-matched photonic crystals

Authors: Xiaoxi Xu, Feiyan Zhao, Jiayao Huang, Hehe Xiang, Li Zhang, Zhaopin Chen, Zhongquan Nie, Boris A Malomed, Yongyao Li

Abstract: A new scheme for producing semidiscrete self-trapped vortices (\textquotedblleft swirling photon droplets\textquotedblright ) in photonic crystals with competing quadratic ($χ^{(2)}$) and self-defocusing cubic ($χ^{(3)}$) nonlinearities is proposed. The photonic crystal is designed with a striped structure, in the form of spatially periodic modulation of the $χ^{(2)}$ susceptibility, which is impo… ▽ More A new scheme for producing semidiscrete self-trapped vortices (\textquotedblleft swirling photon droplets\textquotedblright ) in photonic crystals with competing quadratic ($χ^{(2)}$) and self-defocusing cubic ($χ^{(3)}$) nonlinearities is proposed. The photonic crystal is designed with a striped structure, in the form of spatially periodic modulation of the $χ^{(2)}$ susceptibility, which is imposed by the quasi-phase-matching technique. Unlike previous realizations of semidiscrete optical modes in composite media, built as combinations of continuous and arrayed discrete waveguides, the semidiscrete vortex droplets are produced here in the fully continuous medium. This work reveals that the system supports two types of semidiscrete vortex droplets, \textit{viz}., onsite- and intersite-centered ones, which feature, respectively, odd and even numbers of stripes, $\mathcal{N}$. Stability areas for the states with different values of $\mathcal{N}$ are identified in the system's parameter space. Some stability areas overlap with each others, giving rise to multistability of states with different $\mathcal{N}$. The coexisting states are mutually degenerate, featuring equal values of the Hamiltonian and propagation constant. An experimental scheme to realize the droplets is outlined, suggesting new possibilities for the long-distance transmission of structured light carrying orbital angular momentum in nonlinear media. △ Less

Submitted 15 September, 2023; v1 submitted 31 August, 2023; originally announced August 2023.

Comments: 10 pages, 7 figures, and 76 references

Report number: Published in Optics Express 31(23), 38343 ?2023?

Improved Coherence in Optically-Defined Niobium Trilayer Junction Qubits

Authors: Alexander Anferov, Kan-Heng Lee, Fang Zhao, Jonathan Simon, David I. Schuster

Abstract: Niobium offers the benefit of increased operating temperatures and frequencies for Josephson junctions, which are the core component of superconducting devices. However existing niobium processes are limited by more complicated fabrication methods and higher losses than now-standard aluminum junctions. Combining recent trilayer fabrication advancements, methods to remove lossy dielectrics and mode… ▽ More Niobium offers the benefit of increased operating temperatures and frequencies for Josephson junctions, which are the core component of superconducting devices. However existing niobium processes are limited by more complicated fabrication methods and higher losses than now-standard aluminum junctions. Combining recent trilayer fabrication advancements, methods to remove lossy dielectrics and modern superconducting qubit design, we revisit niobium trilayer junctions and fabricate all-niobium transmons using only optical lithography. We characterize devices in the microwave domain, measuring coherence times up to $62~μ$s and an average qubit quality factor above $10^5$: much closer to state-of-the-art aluminum-junction devices. We find the higher superconducting gap energy also results in reduced quasiparticle sensitivity above $0.16~$K, where aluminum junction performance deteriorates. Our junction process is readily applied to standard optical-based foundry processes, opening new avenues for direct integration and scalability, and paves the way for higher-temperature and higher-frequency quantum devices. △ Less

Submitted 21 February, 2024; v1 submitted 9 June, 2023; originally announced June 2023.

Vortex solitons in quasi-phase-matched photonic crystals

Authors: Feiyan Zhao, Xiaoxi Xu, Hexiang He, Li Zhang, Yangui Zhou, Zhaopin Chen, Boris A. Malomed, Yongyao Li

Abstract: We report solutions for stable compound solitons in a three-dimensional quasi-phase-matched photonic crystal with the quadratic ($χ^{(2)}$) nonlinearity. The photonic crystal is introduced with a checkerboard structure, which can be realized by means of the available technology. The solitons are built as four-peak vortex modes of two types, rhombuses and squares (intersite- and onsite-centered sel… ▽ More We report solutions for stable compound solitons in a three-dimensional quasi-phase-matched photonic crystal with the quadratic ($χ^{(2)}$) nonlinearity. The photonic crystal is introduced with a checkerboard structure, which can be realized by means of the available technology. The solitons are built as four-peak vortex modes of two types, rhombuses and squares (intersite- and onsite-centered self-trapped states, respectively). Their stability areas are identified in the system's parametric space (rhombuses occupy an essentially broader stability domain), while all bright vortex solitons are subject to strong azimuthal instability in uniform $χ^{(2)}$ media. Possibilities for experimental realization of the solitons are outlined. △ Less

Submitted 20 March, 2023; v1 submitted 7 November, 2022; originally announced November 2022.

Comments: 6 pages, 6 figures, 55 references, Physical Review Letters, in press

Journal ref: Phys. Rev. Lett. 130 157203 (2023)

Search for relativistic fractionally charged particles in space

Authors: DAMPE Collaboration, F. Alemanno, C. Altomare, Q. An, P. Azzarello, F. C. T. Barbato, P. Bernardini, X. J. Bi, M. S. Cai, E. Casilli, E. Catanzani, J. Chang, D. Y. Chen, J. L. Chen, Z. F. Chen, M. Y. Cui, T. S. Cui, Y. X. Cui, H. T. Dai, A. De-Benedittis, I. De Mitri, F. de Palma, M. Deliyergiyev, A. Di Giovanni, M. Di Santo , et al. (126 additional authors not shown)

Abstract: More than a century after the performance of the oil drop experiment, the possible existence of fractionally charged particles FCP still remains unsettled. The search for FCPs is crucial for some extensions of the Standard Model in particle physics. Most of the previously conducted searches for FCPs in cosmic rays were based on experiments underground or at high altitudes. However, there have been… ▽ More More than a century after the performance of the oil drop experiment, the possible existence of fractionally charged particles FCP still remains unsettled. The search for FCPs is crucial for some extensions of the Standard Model in particle physics. Most of the previously conducted searches for FCPs in cosmic rays were based on experiments underground or at high altitudes. However, there have been few searches for FCPs in cosmic rays carried out in orbit other than AMS-01 flown by a space shuttle and BESS by a balloon at the top of the atmosphere. In this study, we conduct an FCP search in space based on on-orbit data obtained using the DArk Matter Particle Explorer (DAMPE) satellite over a period of five years. Unlike underground experiments, which require an FCP energy of the order of hundreds of GeV, our FCP search starts at only a few GeV. An upper limit of $6.2\times 10^{-10}~~\mathrm{cm^{-2}sr^{-1} s^{-1}}$ is obtained for the flux. Our results demonstrate that DAMPE exhibits higher sensitivity than experiments of similar types by three orders of magnitude that more stringently restricts the conditions for the existence of FCP in primary cosmic rays. △ Less

Submitted 9 September, 2022; originally announced September 2022.

Comments: 19 pages, 6 figures, accepted by PRD

Report number: 106, 063026

Journal ref: Physical Review D 106.6 (2022): 063026

High-order Compact Gas-kinetic Schemes for Three-dimensional Flow Simulation on Tetrahedral Mesh

Authors: Fengxiang Zhao, Xing Ji, Wei Shyy, Kun Xu

Abstract: A general framework for the development of high-order compact schemes has been proposed recently. The core steps of the schemes are composed of the following. 1). Based on a kinetic model equation, from a generalized initial distribution of flow variables construct a time-accurate evolution solution of gas distribution function at a cell interface ; 2). Introduce the WENO-type weighting functions… ▽ More A general framework for the development of high-order compact schemes has been proposed recently. The core steps of the schemes are composed of the following. 1). Based on a kinetic model equation, from a generalized initial distribution of flow variables construct a time-accurate evolution solution of gas distribution function at a cell interface ; 2). Introduce the WENO-type weighting functions into the time-derivative of the cell interface flux function in the multistage multi-derivative time step** scheme to cope with the possible im**ement of a shock wave on a cell interface within a time step; 3). Take moments of interface gas distribution function to obtain the time-accurate flow variables and the corresponding fluxes at the cell interface, and update the cell-averaged flow variables and their gradients inside each control volume; 4). Within the physical domain of dependence of the reconstructed cell, based on the cell-averaged flow variables and their gradients develop compact initial data reconstruction to get initial flow distributions at the beginning of next time step. A compact gas-kinetic scheme (GKS) up to sixth-order accuracy in space and fourth-order in time has been constructed on 2D unstructured mesh before. In this paper, the compact GKS up to fourth-order accuracy on 3D tetrahedral mesh will be further constructed with the focus on the WENO-type initial data reconstruction. Nonlinear weights are designed to achieve high-order accuracy for the smooth Navier-Stokes solution and keep super robustness in 3D computation with strong shock interactions. The fourth-order compact GKS can use a large time step with CFL number $0.6$ in the simulations from subsonic to hypersonic flow. A series of test cases are used to validate the scheme. The high-order compact GKS is ready for 3D applications with complex geometry. △ Less

Submitted 9 August, 2022; originally announced August 2022.

Prospects for Detecting the Diffuse Supernova Neutrino Background with JUNO

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli, Thilo Birkenfeld, Sylvie Blin , et al. (577 additional authors not shown)

Abstract: We present the detection potential for the diffuse supernova neutrino background (DSNB) at the Jiangmen Underground Neutrino Observatory (JUNO), using the inverse-beta-decay (IBD) detection channel on free protons. We employ the latest information on the DSNB flux predictions, and investigate in detail the background and its reduction for the DSNB search at JUNO. The atmospheric neutrino induced n… ▽ More We present the detection potential for the diffuse supernova neutrino background (DSNB) at the Jiangmen Underground Neutrino Observatory (JUNO), using the inverse-beta-decay (IBD) detection channel on free protons. We employ the latest information on the DSNB flux predictions, and investigate in detail the background and its reduction for the DSNB search at JUNO. The atmospheric neutrino induced neutral current (NC) background turns out to be the most critical background, whose uncertainty is carefully evaluated from both the spread of model predictions and an envisaged \textit{in situ} measurement. We also make a careful study on the background suppression with the pulse shape discrimination (PSD) and triple coincidence (TC) cuts. With latest DSNB signal predictions, more realistic background evaluation and PSD efficiency optimization, and additional TC cut, JUNO can reach the significance of 3$σ$ for 3 years of data taking, and achieve better than 5$σ$ after 10 years for a reference DSNB model. In the pessimistic scenario of non-observation, JUNO would strongly improve the limits and exclude a significant region of the model parameter space. △ Less

Submitted 13 October, 2022; v1 submitted 18 May, 2022; originally announced May 2022.

Comments: 29 pages, 11 figures, final published version in JCAP

Journal ref: JCAP 10 (2022) 033

Single-shot wide-field optical section imaging

Authors: Yuyao Hu, Dong Liang, **g Wang, Ya** Xuan, Fu Zhao, Jun Liu, Ruxin Li

Abstract: Optical sectioning technology has been widely used in various fluorescence microscopes owing to its background removing capability. Here, a virtual HiLo based on edge detection (V-HiLo-ED) is proposed to achieve wide-field optical sectioning, which requires only single wide-field image. Compared with conventional optical sectioning technologies, its imaging speed can be increased by at least twice… ▽ More Optical sectioning technology has been widely used in various fluorescence microscopes owing to its background removing capability. Here, a virtual HiLo based on edge detection (V-HiLo-ED) is proposed to achieve wide-field optical sectioning, which requires only single wide-field image. Compared with conventional optical sectioning technologies, its imaging speed can be increased by at least twice, meanwhile maintaining nice optical sectioning performance, low cost, and excellent artifact suppression capabilities. Furthermore, the new V-HiLo-ED can also be extended to other non-fluorescence imaging fields. This simple, cost-effective and easy-to-extend method will benefit many research and application fields that needs to remove out-of-focus blurred images. △ Less

Submitted 5 November, 2021; originally announced November 2021.

Comments: 22 pages 9 figures

Implementation and Optimization of the PTOLEMY Transverse Drift Electromagnetic Filter

Authors: A. Apponi, M. G. Betti, M. Borghesi, A. Boscá, F. Calle, N. Canci, G. Cavoto, C. Chang, W. Chung, A. G. Cocco, A. P. Colijn, N. D'Ambrosio, N. de Groot, M. Faverzani, A. Ferella, E. Ferri, L. Ficcadenti, P. Garcia-Abia, G. Garcia Gomez-Tejedor, S. Gariazzo, F. Gatti, C. Gentile, A. Giachero, Y. Hochberg, Y. Kahn , et al. (31 additional authors not shown)

Abstract: The PTOLEMY transverse drift filter is a new concept to enable precision analysis of the energy spectrum of electrons near the tritium beta-decay endpoint. This paper details the implementation and optimization methods for successful operation of the filter. We present the first demonstrator that produces the required magnetic field properties with an iron return-flux magnet. Two methods for the s… ▽ More The PTOLEMY transverse drift filter is a new concept to enable precision analysis of the energy spectrum of electrons near the tritium beta-decay endpoint. This paper details the implementation and optimization methods for successful operation of the filter. We present the first demonstrator that produces the required magnetic field properties with an iron return-flux magnet. Two methods for the setting of filter electrode voltages are detailed. The challenges of low-energy electron transport in cases of low field are discussed, such as the growth of the cyclotron radius with decreasing magnetic field, which puts a ceiling on filter performance relative to fixed filter dimensions. Additionally, low pitch angle trajectories are dominated by motion parallel to the magnetic field lines and introduce non-adiabatic conditions and curvature drift. To minimize these effects and maximize electron acceptance into the filter, we present a three-potential-well design to simultaneously drain the parallel and transverse kinetic energies throughout the length of the filter. These optimizations are shown, in simulation, to achieve low-energy electron transport from a 1 T iron core (or 3 T superconducting) starting field with initial kinetic energy of 18.6 keV drained to <10 eV (<1 eV) in about 80 cm. This result for low field operation paves the way for the first demonstrator of the PTOLEMY spectrometer for measurement of electrons near the tritium endpoint to be constructed at the Gran Sasso National Laboratary (LNGS) in Italy. △ Less

Submitted 24 January, 2022; v1 submitted 23 August, 2021; originally announced August 2021.

Comments: 29 pages, 25 figures

AI-based Aortic Vessel Tree Segmentation for Cardiovascular Diseases Treatment: Status Quo

Authors: Yuan **, Antonio Pepe, Jianning Li, Christina Gsaxner, Fen-hua Zhao, Kelsey L. Pomykala, Jens Kleesiek, Alejandro F. Frangi, Jan Egger

Abstract: The aortic vessel tree is composed of the aorta and its branching arteries, and plays a key role in supplying the whole body with blood. Aortic diseases, like aneurysms or dissections, can lead to an aortic rupture, whose treatment with open surgery is highly risky. Therefore, patients commonly undergo drug treatment under constant monitoring, which requires regular inspections of the vessels thro… ▽ More The aortic vessel tree is composed of the aorta and its branching arteries, and plays a key role in supplying the whole body with blood. Aortic diseases, like aneurysms or dissections, can lead to an aortic rupture, whose treatment with open surgery is highly risky. Therefore, patients commonly undergo drug treatment under constant monitoring, which requires regular inspections of the vessels through imaging. The standard imaging modality for diagnosis and monitoring is computed tomography (CT), which can provide a detailed picture of the aorta and its branching vessels if completed with a contrast agent, called CT angiography (CTA). Optimally, the whole aortic vessel tree geometry from consecutive CTAs is overlaid and compared. This allows not only detection of changes in the aorta, but also of its branches, caused by the primary pathology or newly developed. When performed manually, this reconstruction requires slice by slice contouring, which could easily take a whole day for a single aortic vessel tree, and is therefore not feasible in clinical practice. Automatic or semi-automatic vessel tree segmentation algorithms, however, can complete this task in a fraction of the manual execution time and run in parallel to the clinical routine of the clinicians. In this paper, we systematically review computing techniques for the automatic and semi-automatic segmentation of the aortic vessel tree. The review concludes with an in-depth discussion on how close these state-of-the-art approaches are to an application in clinical practice and how active this research field is, taking into account the number of publications, datasets and challenges. △ Less

Submitted 3 April, 2023; v1 submitted 6 August, 2021; originally announced August 2021.

Direct Modeling for Computational Fluid Dynamics and the Construction of High-order Compact Scheme for Compressible Flow Simulations

Authors: Fengxiang Zhao, Xing Ji, Wei Shyy, Kun Xu

Abstract: Computational fluid dynamics is a direct modeling of physical laws in a discretized space. The basic physical laws include the mass, momentum and energy conservations, physically consistent transport process, and similar domain of dependence and influence between the physical reality and the numerical representation. Therefore, a physically soundable numerical scheme must be a compact one which in… ▽ More Computational fluid dynamics is a direct modeling of physical laws in a discretized space. The basic physical laws include the mass, momentum and energy conservations, physically consistent transport process, and similar domain of dependence and influence between the physical reality and the numerical representation. Therefore, a physically soundable numerical scheme must be a compact one which involves the closest neighboring cells within the domain of dependence for the solution update under a CFL number $(\sim 1 )$. In the construction of explicit high-order compact scheme, subcell flow distributions or the equivalent degree of freedoms beyond the cell averaged flow variables must be evolved and updated, such as the gradients of the flow variables inside each control volume. The direct modeling of flow evolution under generalized initial condition will be developed in this paper. The direct modeling will provide the updates of flow variables differently on both sides of a cell interface and limit high-order time derivatives of the flux function nonlinearly in case of discontinuity in time, such as a shock wave moving across a cell interface within a time step. The direct modeling unifies the nonlinear limiters in both space for the data reconstruction and time for the time-dependent flux transport. Under the direct modeling framework, as an example, the high-order compact gas-kinetic scheme (GKS) will be constructed. The scheme shows significant improvement in terms of robustness, accuracy, and efficiency in comparison with the previous high-order compact GKS. △ Less

Submitted 14 July, 2021; originally announced July 2021.

Comments: 30 pages, 30 figures

MSC Class: 65M08 (Primary) 65Z99 (Secondary)

Radioactivity control strategy for the JUNO detector

Authors: JUNO collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli, Thilo Birkenfeld, Sylvie Blin , et al. (578 additional authors not shown)

Abstract: JUNO is a massive liquid scintillator detector with a primary scientific goal of determining the neutrino mass ordering by studying the oscillated anti-neutrino flux coming from two nuclear power plants at 53 km distance. The expected signal anti-neutrino interaction rate is only 60 counts per day, therefore a careful control of the background sources due to radioactivity is critical. In particula… ▽ More JUNO is a massive liquid scintillator detector with a primary scientific goal of determining the neutrino mass ordering by studying the oscillated anti-neutrino flux coming from two nuclear power plants at 53 km distance. The expected signal anti-neutrino interaction rate is only 60 counts per day, therefore a careful control of the background sources due to radioactivity is critical. In particular, natural radioactivity present in all materials and in the environment represents a serious issue that could impair the sensitivity of the experiment if appropriate countermeasures were not foreseen. In this paper we discuss the background reduction strategies undertaken by the JUNO collaboration to reduce at minimum the impact of natural radioactivity. We describe our efforts for an optimized experimental design, a careful material screening and accurate detector production handling, and a constant control of the expected results through a meticulous Monte Carlo simulation program. We show that all these actions should allow us to keep the background count rate safely below the target value of 10 Hz in the default fiducial volume, above an energy threshold of 0.7 MeV. △ Less

Submitted 13 October, 2021; v1 submitted 8 July, 2021; originally announced July 2021.

Comments: 35 pages, 12 figures

Geometric phase with full-wedge and half-wedge rotation in nonlinear frequency conversion

Authors: Feiyan Zhao, Jiantao Lü, Hexiang He, Yangui Zhou, Shenhe Fu, Yongyao Li

Abstract: When the quasi-phase matching (QPM) parameters of the $χ^{(2)}$ nonlinear crystal rotate along a closed path, geometric phase will be generated in the signal and idler waves that participate in the nonlinear frequency conversion. In this paper, we study two rotation schemes, full-wedge rotation, and half-wedge rotation, of the QPM parameters in the process of fully nonlinear three-wave mixing. The… ▽ More When the quasi-phase matching (QPM) parameters of the $χ^{(2)}$ nonlinear crystal rotate along a closed path, geometric phase will be generated in the signal and idler waves that participate in the nonlinear frequency conversion. In this paper, we study two rotation schemes, full-wedge rotation, and half-wedge rotation, of the QPM parameters in the process of fully nonlinear three-wave mixing. These two schemes can effectively suppress the uncertainty in creating the geometric phase in the nonlinear frequency conversion process when the intensity of the pump is depleted. The finding of this paper provides an avenue toward constant control of the geometric phase in nonlinear optics applications and quantum information processing. △ Less

Submitted 24 June, 2021; v1 submitted 27 April, 2021; originally announced April 2021.

Comments: 12 Pages, 37 References, and 7 Figures, published on Optics Express

Journal ref: Opt. Exp. 29, 21820-21832 (2021)

The Design and Sensitivity of JUNO's scintillator radiopurity pre-detector OSIRIS

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Guangpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli, Thilo Birkenfeld , et al. (582 additional authors not shown)

Abstract: The OSIRIS detector is a subsystem of the liquid scintillator fillling chain of the JUNO reactor neutrino experiment. Its purpose is to validate the radiopurity of the scintillator to assure that all components of the JUNO scintillator system work to specifications and only neutrino-grade scintillator is filled into the JUNO Central Detector. The aspired sensitivity level of $10^{-16}$ g/g of… ▽ More The OSIRIS detector is a subsystem of the liquid scintillator fillling chain of the JUNO reactor neutrino experiment. Its purpose is to validate the radiopurity of the scintillator to assure that all components of the JUNO scintillator system work to specifications and only neutrino-grade scintillator is filled into the JUNO Central Detector. The aspired sensitivity level of $10^{-16}$ g/g of $^{238}$U and $^{232}$Th requires a large ($\sim$20 m$^3$) detection volume and ultralow background levels. The present paper reports on the design and major components of the OSIRIS detector, the detector simulation as well as the measuring strategies foreseen and the sensitivity levels to U/Th that can be reached in this setup. △ Less

Submitted 31 March, 2021; originally announced March 2021.

Comments: 32 pages, 22 figures

Electric Field Tunable Topological Phases in Graphene Nanoribbons

Authors: Fangzhou Zhao, Ting Cao, Steven G. Louie

Abstract: Graphene nanoribbons (GNRs) possess distinct symmetry-protected topological phases. We show, through first-principles calculations, that by applying an experimentally accessible transverse electric field (TEF), certain boron and nitrogen periodically co-doped GNRs have tunable topological phases. The tunability arises from a field-induced band inversion due to an opposite response of the conductio… ▽ More Graphene nanoribbons (GNRs) possess distinct symmetry-protected topological phases. We show, through first-principles calculations, that by applying an experimentally accessible transverse electric field (TEF), certain boron and nitrogen periodically co-doped GNRs have tunable topological phases. The tunability arises from a field-induced band inversion due to an opposite response of the conduction- and valance-band states to the electric field. With a spatially-varying applied field, segments of GNRs of distinct topological phases are created, resulting in a field-programmable array of topological junction states, each may be occupied with charge or spin. Our findings not only show that electric field may be used as an easy tuning knob for topological phases in quasi-one-dimensional systems, but also provide new design principles for future GNR-based quantum electronic devices through their topological characters. △ Less

Submitted 8 February, 2021; originally announced February 2021.

Journal ref: Phys. Rev. Lett. 127, 166401 (2021)

Two-step multi-resolution reconstruction-based compact gas-kinetic scheme on tetrahedral mesh

Authors: Xing Ji, Fengxiang Zhao, Wei Shyy, Kun Xu

Abstract: In this paper, a third-order compact gas-kinetic scheme (GKS) on unstructured tetrahedral mesh is constructed for the compressible Euler and Navier-Stokes solutions. The time-dependent gas distribution function at a cell interface is used to calculate the fluxes for the updating the cell-averaged flow variables and to evaluate the time accurate cell-averaged flow variables as well for evolving the… ▽ More In this paper, a third-order compact gas-kinetic scheme (GKS) on unstructured tetrahedral mesh is constructed for the compressible Euler and Navier-Stokes solutions. The time-dependent gas distribution function at a cell interface is used to calculate the fluxes for the updating the cell-averaged flow variables and to evaluate the time accurate cell-averaged flow variables as well for evolving the cell-averaged gradients of flow variables. With the accurate evolution model for both flow variables and their slopes, the quality of the scheme depends closely on the accuracy and reliability of the initial reconstruction of flow variables. The reconstruction scheme becomes more challenge on tetrahedral mesh, where the conventional second-order unlimited least-square reconstruction can make the scheme be linearly unstable when using cell-averaged conservative variables alone with von Neumann neighbors. Benefiting from the evolved cell-averaged slopes, on tetrahedral mesh the GKS is linearly stable from a compact third-order smooth reconstruction with a large CFL number. In order to further increase the robustness of the high-order compact GKS for capturing discontinuous solution, a new two-step multi-resolution weighted essentially non-oscillatory (WENO) reconstruction will be proposed. The novelty of the reconstruction includes the following. Firstly, it releases the stability issue from a second-order compact reconstruction through the introduction of a pre-reconstruction step. Secondly, in the third-order non-linear reconstruction, only one more large stencil is added beside those in the second-order one, which significantly simplifies the high-order reconstruction. The proposed third-order scheme shows good robustness in high speed flow computation and favorable mesh adaptability in cases with complex geometry. △ Less

Submitted 2 February, 2021; originally announced February 2021.

Comments: arXiv admin note: text overlap with arXiv:2009.02908

Simultaneously improving multiple imaging parameters with scattering media

Authors: Fu Zhao, Shuman Du, Dong Liang, Jun Liu

Abstract: Traditional optical imaging systems can provide high-quality imaging with complicated and expensive optical design by eliminating aberrations. With the help of optical memory effect (ME), not independently improving single imaging parameter, but simultaneously improving several imaging parameters by adding scattering media to the imaging systems was demonstrated firstly. As an example, in a simple… ▽ More Traditional optical imaging systems can provide high-quality imaging with complicated and expensive optical design by eliminating aberrations. With the help of optical memory effect (ME), not independently improving single imaging parameter, but simultaneously improving several imaging parameters by adding scattering media to the imaging systems was demonstrated firstly. As an example, in a simple single-lens imaging system, except the depth-of-field (DOF) was improved greatly, spherical aberration, coma aberration and chromatic aberration were eliminated simultaneously by placing a scattering medium between the lens and the camera. The results indicate the potential applications of scattering media in many fields such as optical imaging, optical measurements and biomedical applications. △ Less

Submitted 2 February, 2021; originally announced February 2021.

Comments: 9 pages, 6 figures

Calibration Strategy of the JUNO Experiment

Authors: JUNO collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Guangpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Eric Baussan, Marco Bellato, Antonio Bergnoli, Enrico Bernieri, Thilo Birkenfeld , et al. (571 additional authors not shown)

Abstract: We present the calibration strategy for the 20 kton liquid scintillator central detector of the Jiangmen Underground Neutrino Observatory (JUNO). By utilizing a comprehensive multiple-source and multiple-positional calibration program, in combination with a novel dual calorimetry technique exploiting two independent photosensors and readout systems, we demonstrate that the JUNO central detector ca… ▽ More We present the calibration strategy for the 20 kton liquid scintillator central detector of the Jiangmen Underground Neutrino Observatory (JUNO). By utilizing a comprehensive multiple-source and multiple-positional calibration program, in combination with a novel dual calorimetry technique exploiting two independent photosensors and readout systems, we demonstrate that the JUNO central detector can achieve a better than 1% energy linearity and a 3% effective energy resolution, required by the neutrino mass ordering determination. △ Less

Submitted 20 January, 2021; v1 submitted 12 November, 2020; originally announced November 2020.

A three-dimensional compact high-order gas-kinetic scheme on structured mesh

Authors: Xing Ji, Fengxiang Zhao, Wei Shyy, Kun Xu

Abstract: In this paper, a third-order compact gas-kinetic scheme is firstly proposed for three-dimensional computation for the compressible Euler and Navier-Stokes solutions. The scheme achieves its compactness due to the time-dependent gas distribution function in GKS, which provides not only the fluxes but also the time accurate flow variables in the next time level at a cell interface. As a result, the… ▽ More In this paper, a third-order compact gas-kinetic scheme is firstly proposed for three-dimensional computation for the compressible Euler and Navier-Stokes solutions. The scheme achieves its compactness due to the time-dependent gas distribution function in GKS, which provides not only the fluxes but also the time accurate flow variables in the next time level at a cell interface. As a result, the cell averaged first-order spatial derivatives of flow variables can be obtained naturally through the Gauss's theorem. Then, a third-order compact reconstruction involving the cell averaged values and their first-order spatial derivatives can be achieved. The trilinear interpolation is used to treat possible non-coplanar elements on general hexahedral mesh. The constrained least-square technique is applied to improve the accuracy in the smooth case. To deal with both smooth and discontinuous flows, a new HWENO reconstruction is designed in the current scheme by following the ideas in Zhu, 2018. No identification of troubled cells is needed in the current scheme. In contrast to the Riemann solver-based method, the compact scheme can achieve a third-order temporal accuracy with the two-stage two-derivative temporal discretization, instead of the three-stage Runge-Kutta method. Overall, the proposed scheme inherits the high accuracy and efficiency of the previous ones in two-dimensional case. The desired third-order accuracy can be obtained with curved boundary. The robustness of the scheme has been validated through many cases, including strong shocks in both inviscid and viscous flow computations. Quantitative comparisons for both smooth and discontinuous cases show that the current third-order scheme can give competitive results against the fifth-order non-compact GKS under the same mesh. A large CFL number around 0.5 can be used in the present scheme. △ Less

Submitted 7 September, 2020; originally announced September 2020.

Optimization of the JUNO liquid scintillator composition using a Daya Bay antineutrino detector

Authors: Daya Bay, JUNO collaborations, :, A. Abusleme, T. Adam, S. Ahmad, S. Aiello, M. Akram, N. Ali, F. P. An, G. P. An, Q. An, G. Andronico, N. Anfimov, V. Antonelli, T. Antoshkina, B. Asavapibhop, J. P. A. M. de André, A. Babic, A. B. Balantekin, W. Baldini, M. Baldoncini, H. R. Band, A. Barresi, E. Baussan , et al. (642 additional authors not shown)

Abstract: To maximize the light yield of the liquid scintillator (LS) for the Jiangmen Underground Neutrino Observatory (JUNO), a 20 t LS sample was produced in a pilot plant at Daya Bay. The optical properties of the new LS in various compositions were studied by replacing the gadolinium-loaded LS in one antineutrino detector. The concentrations of the fluor, PPO, and the wavelength shifter, bis-MSB, were… ▽ More To maximize the light yield of the liquid scintillator (LS) for the Jiangmen Underground Neutrino Observatory (JUNO), a 20 t LS sample was produced in a pilot plant at Daya Bay. The optical properties of the new LS in various compositions were studied by replacing the gadolinium-loaded LS in one antineutrino detector. The concentrations of the fluor, PPO, and the wavelength shifter, bis-MSB, were increased in 12 steps from 0.5 g/L and <0.01 mg/L to 4 g/L and 13 mg/L, respectively. The numbers of total detected photoelectrons suggest that, with the optically purified solvent, the bis-MSB concentration does not need to be more than 4 mg/L. To bridge the one order of magnitude in the detector size difference between Daya Bay and JUNO, the Daya Bay data were used to tune the parameters of a newly developed optical model. Then, the model and tuned parameters were used in the JUNO simulation. This enabled to determine the optimal composition for the JUNO LS: purified solvent LAB with 2.5 g/L PPO, and 1 to 4 mg/L bis-MSB. △ Less

Submitted 1 July, 2020; originally announced July 2020.

Comments: 13 pages, 8 figures

Feasibility and physics potential of detecting $^8$B solar neutrinos at JUNO

Authors: JUNO collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Sebastiano Aiello, Muhammad Akram, Nawab Ali, Fengpeng An, Guangpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Eric Baussan, Marco Bellato, Antonio Bergnoli, Enrico Bernieri, David Biare , et al. (572 additional authors not shown)

Abstract: The Jiangmen Underground Neutrino Observatory~(JUNO) features a 20~kt multi-purpose underground liquid scintillator sphere as its main detector. Some of JUNO's features make it an excellent experiment for $^8$B solar neutrino measurements, such as its low-energy threshold, its high energy resolution compared to water Cherenkov detectors, and its much large target mass compared to previous liquid s… ▽ More The Jiangmen Underground Neutrino Observatory~(JUNO) features a 20~kt multi-purpose underground liquid scintillator sphere as its main detector. Some of JUNO's features make it an excellent experiment for $^8$B solar neutrino measurements, such as its low-energy threshold, its high energy resolution compared to water Cherenkov detectors, and its much large target mass compared to previous liquid scintillator detectors. In this paper we present a comprehensive assessment of JUNO's potential for detecting $^8$B solar neutrinos via the neutrino-electron elastic scattering process. A reduced 2~MeV threshold on the recoil electron energy is found to be achievable assuming the intrinsic radioactive background $^{238}$U and $^{232}$Th in the liquid scintillator can be controlled to 10$^{-17}$~g/g. With ten years of data taking, about 60,000 signal and 30,000 background events are expected. This large sample will enable an examination of the distortion of the recoil electron spectrum that is dominated by the neutrino flavor transformation in the dense solar matter, which will shed new light on the tension between the measured electron spectra and the predictions of the standard three-flavor neutrino oscillation framework. If $Δm^{2}_{21}=4.8\times10^{-5}~(7.5\times10^{-5})$~eV$^{2}$, JUNO can provide evidence of neutrino oscillation in the Earth at the about 3$σ$~(2$σ$) level by measuring the non-zero signal rate variation with respect to the solar zenith angle. Moveover, JUNO can simultaneously measure $Δm^2_{21}$ using $^8$B solar neutrinos to a precision of 20\% or better depending on the central value and to sub-percent precision using reactor antineutrinos. A comparison of these two measurements from the same detector will help elucidate the current tension between the value of $Δm^2_{21}$ reported by solar neutrino experiments and the KamLAND experiment. △ Less

Submitted 21 June, 2020; originally announced June 2020.

Comments: 29 pages, 14 plots, 7 tables

TAO Conceptual Design Report: A Precision Measurement of the Reactor Antineutrino Spectrum with Sub-percent Energy Resolution

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Sebastiano Aiello, Muhammad Akram, Nawab Ali, Fengpeng An, Guangpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Eric Baussan, Marco Bellato, Antonio Bergnoli, Enrico Bernieri, David Biare , et al. (568 additional authors not shown)

Abstract: The Taishan Antineutrino Observatory (TAO, also known as JUNO-TAO) is a satellite experiment of the Jiangmen Underground Neutrino Observatory (JUNO). A ton-level liquid scintillator detector will be placed at about 30 m from a core of the Taishan Nuclear Power Plant. The reactor antineutrino spectrum will be measured with sub-percent energy resolution, to provide a reference spectrum for future re… ▽ More The Taishan Antineutrino Observatory (TAO, also known as JUNO-TAO) is a satellite experiment of the Jiangmen Underground Neutrino Observatory (JUNO). A ton-level liquid scintillator detector will be placed at about 30 m from a core of the Taishan Nuclear Power Plant. The reactor antineutrino spectrum will be measured with sub-percent energy resolution, to provide a reference spectrum for future reactor neutrino experiments, and to provide a benchmark measurement to test nuclear databases. A spherical acrylic vessel containing 2.8 ton gadolinium-doped liquid scintillator will be viewed by 10 m^2 Silicon Photomultipliers (SiPMs) of >50% photon detection efficiency with almost full coverage. The photoelectron yield is about 4500 per MeV, an order higher than any existing large-scale liquid scintillator detectors. The detector operates at -50 degree C to lower the dark noise of SiPMs to an acceptable level. The detector will measure about 2000 reactor antineutrinos per day, and is designed to be well shielded from cosmogenic backgrounds and ambient radioactivities to have about 10% background-to-signal ratio. The experiment is expected to start operation in 2022. △ Less

Submitted 18 May, 2020; originally announced May 2020.

Comments: 134 pages, 114 figures

An acoustic and shock wave capturing compact high-order gas-kinetic scheme with spectral-like resolution

Authors: Fengxiang Zhao, Xing Ji, Wei Shyy, Kun Xu

Abstract: In this paper, a compact high-order gas-kinetic scheme (GKS) with spectral resolution will be presented and used in the simulation of acoustic and shock waves. For accurate simulation, the numerical scheme is required to have excellent dissipation-dispersion preserving property, while the wave modes, propagation characteristics, and wave speed of the numerical solution should be kept as close as p… ▽ More In this paper, a compact high-order gas-kinetic scheme (GKS) with spectral resolution will be presented and used in the simulation of acoustic and shock waves. For accurate simulation, the numerical scheme is required to have excellent dissipation-dispersion preserving property, while the wave modes, propagation characteristics, and wave speed of the numerical solution should be kept as close as possible to the exact solution of governing equations. For compressible flow simulation with shocks, the numerical scheme has to be equipped with proper numerical dissipation to make a crispy transition in the shock layer. Based on the high-order gas evolution model, the GKS provides a time accurate solution at a cell interface, from which both time accurate flux function and the time evolving flow variables can be obtained. The GKS updates explicitly both cell-averaged conservative flow variables and the cell-averaged gradients by applying Gauss-theorem along the boundary of the control volume. Based on the cell-averaged flow variables and cell-averaged gradients, a reconstruction with compact stencil can be obtained. With the same stencil of a second-order scheme, a reconstruction up to 8th-order spacial accuracy can be constructed, which include the nonlinear and linear reconstruction for the non-equilibrium and equilibrium states respectively. The GKS unifies the nonlinear and linear reconstruction through a time evolution process at a cell interface from the non-equilibrium state to an equilibrium one. In the region between these two limits, the contribution from nonlinear and linear reconstructions depends on the weighting functions of $\exp(-Δt/τ)$ and $(1-\exp(-Δt /τ))$, where $Δt$ is the time step and $τ$ is the particle collision time, which is enhanced in the shock region. As a result, both shock and acoustic wave can be captured accurately in GKS. △ Less

Submitted 28 March, 2020; v1 submitted 27 December, 2019; originally announced January 2020.

Comments: 35 pages, 51 figures

MSC Class: 65Z05 (Primary); 76Q05 (Secondary)

Threshold Voltage Improvement and Leakage Reduction of AlGaN/GaN HEMTs Using Dual-Layer SiNx Stressors

Authors: Wei-Chih Cheng, Minghao He, Siqi Lei, Liang Wang, **gyi Wu, Fanming Zeng, Qiaoyu Hu, Feng Zhao, Mansun Chan, Guangrui, Xia, Hongyu Yu

Abstract: In this work, AlGaN/GaN HEMTs with dual-layer SiNx stressors (composed of a low-stress layer and a high-stress layer) were investigated. The low-stress padding layer solved the surface damage problem caused during the deposition of the high-stress SiNx, and provided a good passivated interface. The HEMTs with dual-layer stressors showed a 1 V increase in the threshold voltage (Vth) with comparable… ▽ More In this work, AlGaN/GaN HEMTs with dual-layer SiNx stressors (composed of a low-stress layer and a high-stress layer) were investigated. The low-stress padding layer solved the surface damage problem caused during the deposition of the high-stress SiNx, and provided a good passivated interface. The HEMTs with dual-layer stressors showed a 1 V increase in the threshold voltage (Vth) with comparable on-current and RF current gain to those without stressors. Moreover, the off-current (I_off) was shown to be reduced by one to three orders of magnitude in the strained devices as a result of the lower electric field in AlGaN, which suppressed the gate injection current. The dual-layer stressor scheme supports strain engineering as an effective approach in the pursuit of the normally-off operation of AlGaN/GaN HEMTs. △ Less

Submitted 31 July, 2019; originally announced August 2019.

High-order ALE gas-kinetic scheme with unstructured WENO reconstruction

Authors: Liang Pan, Fengxiang Zhao, Kun Xu

Abstract: In this paper, a high-order multi-dimensional gas-kinetic scheme is presented for both inviscid and viscous flows in arbitrary Lagrangian-Eulerian (ALE) formulation. Compared with the traditional ALE method, the flow variables are updated in the finite volume framework, and the rezoning and remap** steps are not required. The two-stage fourth-order method is used for the temporal discretization,… ▽ More In this paper, a high-order multi-dimensional gas-kinetic scheme is presented for both inviscid and viscous flows in arbitrary Lagrangian-Eulerian (ALE) formulation. Compared with the traditional ALE method, the flow variables are updated in the finite volume framework, and the rezoning and remap** steps are not required. The two-stage fourth-order method is used for the temporal discretization, and the second-order gas-kinetic solver is applied for the flux evaluation. In the two-stage method, the spatial reconstruction is performed at both initial and intermediate stage, and the computational mesh at the corresponding stage is given by the specified mesh velocity. In the moving mesh procedure, the mesh may distort severely and the mesh quality is reduced. To achieve the accuracy and improve the robustness, the newly developed WENO method \cite{un-WENO3} on quadrilateral unstructured meshes is adopted at each stage. The Gaussian quadrature is used for flux calculation. For each Gaussian point, the reconstruction performed in the local moving coordinate, where the variation of mesh velocity is taken into account. Therefore, the accuracy and geometric conservation law can be well preserved by the current scheme even with the largely deforming mesh. Numerical examples are presented to validate the performance of current scheme, where the mesh adaptation method and cell centered Lagrangian method are used to provide mesh velocity. △ Less

Submitted 23 May, 2019; v1 submitted 19 May, 2019; originally announced May 2019.

Silicon Nitride Stress Liner Impacts on the Electrical Characteristics of AlGaN/GaN HEMTs

Authors: Wei-Chih Cheng, Tao Fang, Siqi Lei, Yunlong Zhao, Minghao He, Mansun Chan, Guangrui, Xia, Feng Zhao, Hongyu Yu

Abstract: Due to the piezoelectric nature of GaN, the 2DEG in AlGaN/GaN HEMT could be engineered by strain. In this work, SiNx deposited using dual-frequency PECVD was used as a stressor. The output performance of the devices was dominated by the surface passivation instead of the stress effect. However, the threshold voltage was increased by the induced stress, supporting strain engineering as an effective… ▽ More Due to the piezoelectric nature of GaN, the 2DEG in AlGaN/GaN HEMT could be engineered by strain. In this work, SiNx deposited using dual-frequency PECVD was used as a stressor. The output performance of the devices was dominated by the surface passivation instead of the stress effect. However, the threshold voltage was increased by the induced stress, supporting strain engineering as an effective approach to pursue the normally-off operation of AlGaN/GaN HEMTs. △ Less

Submitted 12 March, 2019; originally announced March 2019.

Compact Higher-order Gas-kinetic Schemes with Spectral-like Resolution for Compressible Flow Simulations

Authors: Fengxiang Zhao, Xing Ji, Wei Shyy, Kun Xu

Abstract: In this paper, a class of compact higher-order gas-kinetic schemes (GKS) with spectral resolution will be presented. Based on the high-order gas evolution model in GKS, both the interface flux function and conservative flow variables can be evaluated explicitly from the time-accurate gas distribution function. As a result, inside each control volume both the cell-averaged flow variables and their… ▽ More In this paper, a class of compact higher-order gas-kinetic schemes (GKS) with spectral resolution will be presented. Based on the high-order gas evolution model in GKS, both the interface flux function and conservative flow variables can be evaluated explicitly from the time-accurate gas distribution function. As a result, inside each control volume both the cell-averaged flow variables and their cell-averaged gradients can be updated within each time step. The flow variable update and slope update are coming from the same physical solution at the cell interface. Different from many other approaches, such as HWENO, there are no additional governing equations in GKS for the slopes or equivalent degrees of freedom independently inside each cell. For nonlinear gas dynamic evolution, the above compact linear reconstruction from the symmetric stencil can be divided into sub-stencils and apply a biased nonlinear WENO-Z reconstruction. In GKS, the time evolution solution of the gas distribution function at a cell interface covers a physical process from an initial non-equilibrium state to a final equilibrium one. The GKS evolution models unifies the nonlinear and linear reconstructions in gas evolution process for the determination of a time-dependent gas distribution function. This dynamically adaptive model helps to solve a long lasting problem in the development of high-order schemes about the choices of the linear and nonlinear reconstructions. Compared with discontinuous Galerkin (DG) scheme, the current compact GKS uses the same local and compact stencil, achieves the 6th-order and 8th-order accuracy, uses a much larger time step with CFL number $\geq 0.3$, and gets accurate solutions in both shock and smooth regions without introducing trouble cell and additional limiting process. At the same time, the current scheme solves the Navier-Stokes equations. △ Less

Submitted 1 January, 2019; originally announced January 2019.

Comments: 38 pages, 48 figures

MSC Class: 65M08 (Primary) 65Z99 (Secondary)

Direct observation of corner states in second-order topological photonic crystal slabs

Authors: Xiao-Dong Chen, Wei-Min Deng, Fu-Long Shi, Fu-Li Zhao, Min Chen, Jian-Wen Dong

Abstract: Recently, higher-order topological phases that do not obey the usual bulk-edge correspondence principle have been introduced in electronic insulators and brought into classical systems, featuring with in-gap corner/hinge states. So far, second-order topological insulators have been realized in mechanical metamaterials, microwave circuit, topolectrical circuit and acoustic metamaterials. Here, usin… ▽ More Recently, higher-order topological phases that do not obey the usual bulk-edge correspondence principle have been introduced in electronic insulators and brought into classical systems, featuring with in-gap corner/hinge states. So far, second-order topological insulators have been realized in mechanical metamaterials, microwave circuit, topolectrical circuit and acoustic metamaterials. Here, using near-field scanning measurements, we show the direct observation of corner states in second-order topological photonic crystal (PC) slabs consisting of periodic dielectric rods on a perfect electric conductor (PEC). Based on the generalized two-dimensional (2D) Su-Schrieffer-Heeger (SSH) model, we show that the emergence of corner states roots in the nonzero edge dipolar polarization instead of the nonzero bulk quadrupole polarization. We demonstrate the topological transition of 2D Zak phases of PC slabs by tuning intra-cell distances between two neighboring rods. We also directly observe in-gap 1D edge states and 0D corner states in the microwave regime. Our work presents that the PC slab is a powerful platform to directly observe topological states, and paves the way to study higher-order photonic topological insulators. △ Less

Submitted 22 December, 2018; v1 submitted 18 December, 2018; originally announced December 2018.

Journal ref: Phys. Rev. Lett. 122, 233902 (2019)

The Compact Linear Collider (CLIC) - 2018 Summary Report

Authors: The CLIC, CLICdp collaborations, :, T. K. Charles, P. J. Giansiracusa, T. G. Lucas, R. P. Rassool, M. Volpi, C. Balazs, K. Afanaciev, V. Makarenko, A. Patapenka, I. Zhuk, C. Collette, M. J. Boland, A. C. Abusleme Hoffman, M. A. Diaz, F. Garay, Y. Chi, X. He, G. Pei, S. Pei, G. Shu, X. Wang, J. Zhang , et al. (671 additional authors not shown)

Abstract: The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the… ▽ More The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years. △ Less

Submitted 6 May, 2019; v1 submitted 14 December, 2018; originally announced December 2018.

Comments: 112 pages, 59 figures; published as CERN Yellow Report Monograph Vol. 2/2018; corresponding editors: Philip N. Burrows, Nuria Catalan Lasheras, Lucie Linssen, Marko Petrič, Aidan Robson, Daniel Schulte, Eva Sicking, Steinar Stapnes

Report number: CERN-2018-005-M

A Design for an Electromagnetic Filter for Precision Energy Measurements at the Tritium Endpoint

Authors: M. G. Betti, M. Biasotti, A. Bosca, F. Calle, J. Carabe-Lopez, G. Cavoto, C. Chang, W. Chung, A. G. Cocco, A. P. Colijn, J. Conrad, N. D'Ambrosio, P. F. de Salas, M. Faverzani, A. Ferella, E. Ferri, P. Garcia-Abia, G. Garcia Gomez-Tejedor, S. Gariazzo, F. Gatti, C. Gentile, A. Giachero, J. Gudmundsson, Y. Hochberg, Y. Kahn , et al. (26 additional authors not shown)

Abstract: We present a detailed description of the electromagnetic filter for the PTOLEMY project to directly detect the Cosmic Neutrino Background (CNB). Starting with an initial estimate for the orbital magnetic moment, the higher-order drift process of ExB is configured to balance the gradient-B drift motion of the electron in such a way as to guide the trajectory into the standing voltage potential alon… ▽ More We present a detailed description of the electromagnetic filter for the PTOLEMY project to directly detect the Cosmic Neutrino Background (CNB). Starting with an initial estimate for the orbital magnetic moment, the higher-order drift process of ExB is configured to balance the gradient-B drift motion of the electron in such a way as to guide the trajectory into the standing voltage potential along the mid-plane of the filter. As a function of drift distance along the length of the filter, the filter zooms in with exponentially increasing precision on the transverse velocity component of the electron kinetic energy. This yields a linear dimension for the total filter length that is exceptionally compact compared to previous techniques for electromagnetic filtering. The parallel velocity component of the electron kinetic energy oscillates in an electrostatic harmonic trap as the electron drifts along the length of the filter. An analysis of the phase-space volume conservation validates the expected behavior of the filter from the adiabatic invariance of the orbital magnetic moment and energy conservation following Liouville's theorem for Hamiltonian systems. △ Less

Submitted 15 October, 2018; originally announced October 2018.

A HWENO Reconstruction Based High-order Compact Gas-kinetic Scheme on Unstructured Meshes

Authors: Xing Ji, Fengxiang Zhao, Wei Shyy, Kun Xu

Abstract: As an extension of previous fourth-order compact gas kinetic scheme (GKS) on structured meshes (Ji et al. 2018), this work is about the development of a third-order compact GKS on unstructured meshes for the compressible Euler and Navier-Stokes solutions. Based on the time accurate high-order gas-kinetic evolution solution at a cell interface, the time dependent gas distribution function in GKS pr… ▽ More As an extension of previous fourth-order compact gas kinetic scheme (GKS) on structured meshes (Ji et al. 2018), this work is about the development of a third-order compact GKS on unstructured meshes for the compressible Euler and Navier-Stokes solutions. Based on the time accurate high-order gas-kinetic evolution solution at a cell interface, the time dependent gas distribution function in GKS provides not only the flux function and its time derivative at a cell interface, but also the time accurate flow variables there at next time level. As a result, besides updating the conservative flow variables inside each control volume through the interface fluxes, the cell averaged first-order spatial derivatives of flow variables in the cell can be also obtained using the updated flow variables at the cell interfaces around that cell through the divergence theorem. Therefore, with the flow variables and their first-order spatial derivatives inside each cell, the Hermite WENO (HWENO) techniques can be naturally implemented for the compact high-order reconstruction at the beginning of a new time step. Following the reconstruction method in (Zhu et al. 2018), a new HWENO reconstruction on triangular meshes is designed in the current scheme. Combined with a two-stage temporal discretization and second-order gas-kinetic flux function, a third-order spatial and temporal accuracy in the current compact scheme can be achieved. Accurate solutions can be obtained for both inviscid and viscous flows without sensitive dependence on the quality of triangular meshes. The robustness of the scheme has been validated as well through the cases with strong shocks in the hypersonic viscous flow simulations. △ Less

Submitted 14 February, 2019; v1 submitted 18 September, 2018; originally announced September 2018.

Visible astro-comb filtered by a passively-stabilized Fabry-Perot cavity

Authors: Yuxuan Ma, Fei Meng, Yizhou Liu, Fei Zhao, Gang Zhao, Aimin Wang, Zhigang Zhang

Abstract: We demonstrate a compact 29.3 GHz visible astro-comb covering the spectrum from 560nm to 700nm. A 837 MHz Yb:fiber laser frequency comb phase locked to a Rb clock served as the seed comb to ensure the frequency stability and high side mode suppression ratio. After the visible super-continuum generation, a cavity-length-fixed Fabry-Perot cavity made by ultra-low expansion glass was utilized to filt… ▽ More We demonstrate a compact 29.3 GHz visible astro-comb covering the spectrum from 560nm to 700nm. A 837 MHz Yb:fiber laser frequency comb phase locked to a Rb clock served as the seed comb to ensure the frequency stability and high side mode suppression ratio. After the visible super-continuum generation, a cavity-length-fixed Fabry-Perot cavity made by ultra-low expansion glass was utilized to filter the comb teeth for eliminating the rapid active dithering. The mirrors were home-made complementary chirped mirrors pair with zero dispersion and high reflection to guarantee no mode skip**. These filtered comb teeth were clearly resolved in an astronomical spectrograph of 49,000 resolution, exhibiting sharp linetype, zero noise floor, and uniform exposure amplitude. △ Less

Submitted 18 August, 2018; originally announced August 2018.

Comments: 5 pages, 5 figures

PTOLEMY: A Proposal for Thermal Relic Detection of Massive Neutrinos and Directional Detection of MeV Dark Matter

Authors: E. Baracchini, M. G. Betti, M. Biasotti, A. Bosca, F. Calle, J. Carabe-Lopez, G. Cavoto, C. Chang, A. G. Cocco, A. P. Colijn, J. Conrad, N. D'Ambrosio, P. F. de Salas, M. Faverzani, A. Ferella, E. Ferri, P. Garcia-Abia, G. Garcia Gomez-Tejedor, S. Gariazzo, F. Gatti, C. Gentile, A. Giachero, J. Gudmundsson, Y. Hochberg, Y. Kahn , et al. (26 additional authors not shown)

Abstract: We propose to achieve the proof-of-principle of the PTOLEMY project to directly detect the Cosmic Neutrino Background (CNB). Each of the technological challenges described in [1,2] will be targeted and hopefully solved by the use of the latest experimental developments and profiting from the low background environment provided by the LNGS underground site. The first phase will focus on the graphen… ▽ More We propose to achieve the proof-of-principle of the PTOLEMY project to directly detect the Cosmic Neutrino Background (CNB). Each of the technological challenges described in [1,2] will be targeted and hopefully solved by the use of the latest experimental developments and profiting from the low background environment provided by the LNGS underground site. The first phase will focus on the graphene technology for a tritium target and the demonstration of TES microcalorimetry with an energy resolution of better than 0.05 eV for low energy electrons. These technologies will be evaluated using the PTOLEMY prototype, proposed for underground installation, using precision HV controls to step down the kinematic energy of endpoint electrons to match the calorimeter dynamic range and rate capabilities. The second phase will produce a novel implementation of the EM filter that is scalable to the full target size and which demonstrates intrinsic triggering capability for selecting endpoint electrons. Concurrent with the CNB program, we plan to exploit and develop the unique properties of graphene to implement an intermediate program for direct directional detection of MeV dark matter [3,4]. This program will evaluate the radio-purity and scalability of the graphene fabrication process with the goal of using recently identified ultra-high radio-purity CO2 sources. The direct detection of the CNB is a snapshot of early universe dynamics recorded by the thermal relic neutrino yield taken at a time that predates the epochs of Big Bang Nucleosynthesis, the Cosmic Microwave Background and the recession of galaxies (Hubble Expansion). Big Bang neutrinos are believed to have a central role in the evolution of the Universe and a direct measurement with PTOLEMY will unequivocally establish the extent to which these predictions match present-day neutrino densities. △ Less

Submitted 6 August, 2018; originally announced August 2018.

A Silicon-on-Insulator Slab for Topological Valley Transport

Authors: Xin-Tao He, En-Tao Liang, Jia-Jun Yuan, Hao-Yang Qiu, Xiao-Dong Chen, Fu-Li Zhao, Jian-Wen Dong

Abstract: Silicon-on-insulator (SOI) enables for capability improvement of modern information processing systems by replacing some of their electrical counterparts. With the miniaturization of SOI platform, backscattering suppression is one of the central issues to avoid energy loss and signal distortion in telecommunications. Valley, a new degree of freedom, provides an intriguing way for topologically rob… ▽ More Silicon-on-insulator (SOI) enables for capability improvement of modern information processing systems by replacing some of their electrical counterparts. With the miniaturization of SOI platform, backscattering suppression is one of the central issues to avoid energy loss and signal distortion in telecommunications. Valley, a new degree of freedom, provides an intriguing way for topologically robust information transfer and unidirectional flow of light, in particular for subwavelength strategy that still remains challenge in topological nanophotonics. Here, we realize topological transport in a SOI valley photonic crystal (VPC) slab. In such inversion asymmetry slab, singular Berry curvature near Brillouin zone corners guarantees valley-dependent topological edge states below light cone, maintaining a balance between in-plane robustness and out-of-plane radiation. Topologically robust transport at telecommunication wavelength is observed along two sharp-bend VPC interfaces with a compact size (< 10 um), showing flat-top high transmission of around 10% bandwidth. Furthermore, topological photonic routing is achieved in a bearded-stack VPC interface, originating from broadband unidirectional excitation of the valley-chirality-locked edge state by using a microdisk as a phase vortex generator. Control of valley in SOI platform not only shows a prototype of integrated photonic devices with promising applications for delay line, routing, optical isolation and dense wavelength division multiplexing for information processing based on topological nanophotonics, but also opens a new door towards the observation of non-trivial states even in non-Hermitain systems. △ Less

Submitted 28 May, 2018; originally announced May 2018.

Comments: 20 pages, 4 figures

Journal ref: Nature Communications 10, 872 (2019)

Time-reversed magnetically controlled perturbation (TRMCP) optical focusing inside scattering media

Authors: Zhipeng Yu, Jiangtao Huangfu, Fangyuan Zhao, Meiyun Xia, Xi Wu, Xufeng Niu, Deyu Li, Puxiang Lai, Daifa Wang

Abstract: Manipulating and focusing light deep inside biological tissue and tissue-like complex media has been desired for long yet considered challenging. One feasible strategy is through optical wavefront engineering, where the optical scattering-induced phase distortions are time reversed or pre-compensated so that photons travel along different optical paths interfere constructively at the targeted posi… ▽ More Manipulating and focusing light deep inside biological tissue and tissue-like complex media has been desired for long yet considered challenging. One feasible strategy is through optical wavefront engineering, where the optical scattering-induced phase distortions are time reversed or pre-compensated so that photons travel along different optical paths interfere constructively at the targeted position within a scattering medium. To define the targeted position, an internal guidestar is needed to guide or provide a feedback for wavefront engineering. It could be injected or embedded probes such as fluorescence or nonlinear microspheres, ultrasonic modulation, as well as absorption perturbation. Here we propose to use a magnetically controlled optical absorbing microsphere as the internal guidestar. Using a digital optical phase conjugation system, we obtained sharp optical focusing within scattering media through time-reversing the scattered light perturbed by the magnetic microshpere. Since the object is magnetically controlled, dynamic optical focusing is allowed with a relatively large field-of-view by scanning the magnetic field externally. Moreover, the magnetic microsphere can be packaged with an organic membrane, using biological or chemical means to serve as a carrier. Therefore the technique may find particular applications for enhanced targeted drug delivery, and imaging and photoablation of angiogenic vessels in tumours. △ Less

Submitted 26 February, 2018; v1 submitted 26 October, 2017; originally announced October 2017.

Comments: 21 pages,6 figures, article

Controlled Electrochemical Intercalation of Graphene/h-BN van der Waals Heterostructures

Authors: S. Y. Frank Zhao, Giselle A. Elbaz, D. Kwabena Bediako, Cyndia Yu, Dmitri K. Efetov, Yinsheng Guo, Jayakanth Ravichandran, Kyung-Ah Min, Suklyun Hong, Takashi Taniguchi, Kenji Watanabe, Louis E. Brus, Xavier Roy, Philip Kim

Abstract: Electrochemical intercalation is a powerful method for tuning the electronic properties of layered solids. In this work, we report an electro-chemical strategy to controllably intercalate lithium ions into a series of van der Waals (vdW) heterostructures built by sandwiching graphene between hexagonal boron nitride (h-BN). We demonstrate that encapsulating graphene with h-BN eliminates parasitic s… ▽ More Electrochemical intercalation is a powerful method for tuning the electronic properties of layered solids. In this work, we report an electro-chemical strategy to controllably intercalate lithium ions into a series of van der Waals (vdW) heterostructures built by sandwiching graphene between hexagonal boron nitride (h-BN). We demonstrate that encapsulating graphene with h-BN eliminates parasitic surface side reactions while simultaneously creating a new hetero-interface that permits intercalation between the atomically thin layers. To monitor the electrochemical process, we employ the Hall effect to precisely monitor the intercalation reaction. We also simultaneously probe the spectroscopic and electrical transport properties of the resulting intercalation compounds at different stages of intercalation. We achieve the highest carrier density $> 5 \times 10^{13} cm^{-2}$ with mobility $> 10^3 cm^2/(Vs)$ in the most heavily intercalated samples, where Shubnikov-de Haas quantum oscillations are observed at low temperatures. These results set the stage for further studies that employ intercalation in modifying properties of vdW heterostructures. △ Less

Submitted 21 October, 2017; originally announced October 2017.

Transverse angular momentum in topological photonic crystals

Authors: Wei-Min Deng, Xiao-Dong Chen, Fu-Li Zhao, Jian-Wen Dong

Abstract: Engineering local angular momentum of structured light fields in real space enables unprecedented applications in many fields, in particular for the realization of unidirectional robust transport in topological photonic crystals with non-trivial Berry vortex in momentum space. Here, we show transverse angular momentum modes in silicon topological photonic crystals when considering transverse elect… ▽ More Engineering local angular momentum of structured light fields in real space enables unprecedented applications in many fields, in particular for the realization of unidirectional robust transport in topological photonic crystals with non-trivial Berry vortex in momentum space. Here, we show transverse angular momentum modes in silicon topological photonic crystals when considering transverse electric polarization. Excited by a chiral external source with either transverse spin or orbital angular momentum, robust light flow propagating along opposite directions was observed in several kinds of sharp-turn interfaces between two topologically-distinct silicon photonic crystals. A transverse orbital angular momentum mode with alternating-sign topological charge was found at the boundary of such two photonic crystals. In addition, we also found that unidirectional transport is robust to the working frequency even when the ring-size or location of pseudo-spin source varies in a certain range, leading to the superiority of broadband photonic device. These findings enable for making use of transverse angular momentum, a kind of degree of freedom, to achieve unidirectional robust transport in telecom region and other potential applications in integrated photonic circuits such as on-chip robust delay line. △ Less

Submitted 14 September, 2017; originally announced September 2017.

Comments: 17 pages, 5 figures

Silicon nitride metalenses for unpolarized high-NA visible imaging

Authors: Zhi-Bin Fan, Zeng-Kai Shao, Ming-Yuan Xie, Xiao-Ning Pang, Wen-Sheng Ruan, Fu-Li Zhao, Yu-Jie Chen, Si-Yuan Yu, Jian-Wen Dong

Abstract: As one of nanoscale planar structures, metasurface has shown excellent superiorities on manipulating light intensity, phase and/or polarization with specially designed nanoposts pattern. It allows to miniature a bulky optical lens into the chip-size metalens with wavelength-order thickness, playing an unprecedented role in visible imaging systems (e.g. ultrawide-angle lens and telephoto). However,… ▽ More As one of nanoscale planar structures, metasurface has shown excellent superiorities on manipulating light intensity, phase and/or polarization with specially designed nanoposts pattern. It allows to miniature a bulky optical lens into the chip-size metalens with wavelength-order thickness, playing an unprecedented role in visible imaging systems (e.g. ultrawide-angle lens and telephoto). However, a CMOS-compatible metalens has yet to be achieved in the visible region due to the limitation on material properties such as transmission and compatibility. Here, we experimentally demonstrate a divergent metalens based on silicon nitride platform with large numerical aperture (NA~0.98) and high transmission (~0.8) for unpolarized visible light, fabricated by a 695-nm-thick hexagonal silicon nitride array with a minimum space of 42 nm between adjacent nanoposts. Nearly diffraction-limit virtual focus spots are achieved within the visible region. Such metalens enables to shrink objects into a micro-scale size field of view as small as a single-mode fiber core. Furthermore, a macroscopic metalens with 1-cm-diameter is also realized including over half billion nanoposts, showing a potential application of wide viewing-angle functionality. Thanks to the high-transmission and CMOS-compatibility of silicon nitride, our findings may open a new door for the miniaturization of optical lenses in the fields of optical fibers, microendoscopes, smart phones, aerial cameras, beam sha**, and other integrated on-chip devices. △ Less

Submitted 2 September, 2017; originally announced September 2017.

Comments: 16 pages, 7 figures

Journal ref: Phys. Rev. Applied 10, 014005 (2018)

A Family of High-order Gas-kinetic Schemes and Its Comparison with Riemann Solver Based High-order Methods

Authors: Xing Ji, Fengxiang Zhao, Wei Shyy, Kun Xu

Abstract: Most high order computational fluid dynamics (CFD) methods for compressible flows are based on Riemann solver for the flux evaluation and Runge-Kutta (RK) time step** technique for temporal accuracy. The main advantage of this kind of approach is the easy implementation and stability enhancement by introducing more middle stages. However, the nth-order time accuracy needs no less than n stages f… ▽ More Most high order computational fluid dynamics (CFD) methods for compressible flows are based on Riemann solver for the flux evaluation and Runge-Kutta (RK) time step** technique for temporal accuracy. The main advantage of this kind of approach is the easy implementation and stability enhancement by introducing more middle stages. However, the nth-order time accuracy needs no less than n stages for the RK method, which is very time and memory consuming for a high order method. On the other hand, the multi-stage multi-derivative (MSMD) method can be used to achieve the same order of time accuracy using less middle stages, once the time derivatives of the flux function is used.The gas kinetic scheme (GKS) provides such a time accurate evolution model. By combining the second-order or third-order GKS flux functions with the MSMD technique, a family of high order gas kinetic methods can be constructed. As an extension of the previous 2-stage 4th-order GKS, the 5th-order schemes with 2 and 3 stages will be developed in this paper. Based on the same 5th-order WENO reconstruction, the performance of gas kinetic schemes from the 2nd- to the 5th-order time accurate methods will be evaluated. The results show that the 5th-order scheme can achieve the theoretical order of accuracy for the Euler equations, and present accurate Navier-Stokes solutions as well due to the coupling of inviscid and viscous terms in the GKS formulation. In comparison with Riemann solver based 5th-order RK method, the high order GKS has advantages in terms of efficiency, accuracy, and robustness, for all test cases. It provides a promising direction for the development of high-order CFD methods for the computation of complex flows, such as turbulence and acoustics with shock interactions. △ Less

Submitted 31 July, 2017; originally announced July 2017.

Comments: 33 pages, 13 figures

The DArk Matter Particle Explorer mission

Authors: J. Chang, G. Ambrosi, Q. An, R. Asfandiyarov, P. Azzarello, P. Bernardini, B. Bertucci, M. S. Cai, M. Caragiulo, D. Y. Chen, H. F. Chen, J. L. Chen, W. Chen, M. Y. Cui, T. S. Cui, A. D'Amone, A. De Benedittis, I. De Mitri, M. Di Santo, J. N. Dong, T. K. Dong, Y. F. Dong, Z. X. Dong, G. Donvito, D. Droz , et al. (139 additional authors not shown)

Abstract: The DArk Matter Particle Explorer (DAMPE), one of the four scientific space science missions within the framework of the Strategic Pioneer Program on Space Science of the Chinese Academy of Sciences, is a general purpose high energy cosmic-ray and gamma-ray observatory, which was successfully launched on December 17th, 2015 from the Jiuquan Satellite Launch Center. The DAMPE scientific objectives… ▽ More The DArk Matter Particle Explorer (DAMPE), one of the four scientific space science missions within the framework of the Strategic Pioneer Program on Space Science of the Chinese Academy of Sciences, is a general purpose high energy cosmic-ray and gamma-ray observatory, which was successfully launched on December 17th, 2015 from the Jiuquan Satellite Launch Center. The DAMPE scientific objectives include the study of galactic cosmic rays up to $\sim 10$ TeV and hundreds of TeV for electrons/gammas and nuclei respectively, and the search for dark matter signatures in their spectra. In this paper we illustrate the layout of the DAMPE instrument, and discuss the results of beam tests and calibrations performed on ground. Finally we present the expected performance in space and give an overview of the mission key scientific goals. △ Less

Submitted 14 September, 2017; v1 submitted 26 June, 2017; originally announced June 2017.

Comments: 45 pages, including 29 figures and 6 tables. Published in Astropart. Phys

Journal ref: Astropart. Phys. 95 (2017) 6-24

Global Alfven Eigenmodes in the H-1 heliac

Authors: M. J. Hole, B. D. Blackwell, G. Bowden, M. Cole, A. Konies, C. Michael, F. Zhao, S. R. Haskey

Abstract: Recent upgrades in H-1 power supplies have enabled the operation of the H-1 experiment at higher heating powers than previously attainable. A heating power scan in mixed hydrogen/helium plasmas reveals a change in mode activity with increasing heating power. At low power (<50 kW) modes with beta-induced Alfven eigenmode (BAE) frequency scaling are observed. At higher power modes consistent with an… ▽ More Recent upgrades in H-1 power supplies have enabled the operation of the H-1 experiment at higher heating powers than previously attainable. A heating power scan in mixed hydrogen/helium plasmas reveals a change in mode activity with increasing heating power. At low power (<50 kW) modes with beta-induced Alfven eigenmode (BAE) frequency scaling are observed. At higher power modes consistent with an analysis of nonconventional Global Alfven Eigenmodes (GAEs) are observed, the subject of this work. We have computed the mode continuum, and identified GAE structures using the ideal MHD solver CKA and the gyrokinetic code EUTERPE. An analytic model for ICRH-heated minority ions is used to estimate the fast ion temperature from the hydrogen species. Linear growth rate scans using a local flux surface stability calculation, LGRO, are performed. These studies demonstrate growth from circulating particles whose speed is significantly less than the Alfven speed, and are resonant with the mode through harmonics of the Fourier decomposition of the strongly-shaped heliac magnetic field. They reveal drive is possible with a small, hot energetic tail of the hydrogen species. Local linear growth rate scans are also complemented with global calculations from CKA and EUTERPE. These qualitatively confirm the findings from the LGRO study, and show that the inclusion of finite Larmor radius effects can reduce the growth rate by a factor of three, but do not affect marginal stability. Finally, a study of dam** of the global mode with the thermal plasma is conducted, computing continuum, and the dam** arising from parallel electric fields. We find that continuum dam** is of order 0.1% for the configuration studied. The inclusion of resistivity lifts the dam** to 19%. Such large dam** is consistent with experimental observations that in absence of drive the mode decays rapidly (~0.1 ms). △ Less

Submitted 7 April, 2017; originally announced April 2017.

Comments: 18 pages, 15 figures, submitted 07/04/2017 to Plasma Physics and Controlled Fusion

Topological Phases in Graphene Nanoribbons: Junction States, Spin Centers and Quantum Spin Chains

Authors: Ting Cao, Fangzhou Zhao, Steven G. Louie

Abstract: Knowledge of the topology of the electronic ground state of materials has led to deep insights to novel phenomena such as the integer quantum Hall effect and fermion-number fractionalization, as well as other properties of matter. Joining two insulators of different topological classes produces fascinating boundary states in the band gap. Another exciting recent development is the bottom-up synthe… ▽ More Knowledge of the topology of the electronic ground state of materials has led to deep insights to novel phenomena such as the integer quantum Hall effect and fermion-number fractionalization, as well as other properties of matter. Joining two insulators of different topological classes produces fascinating boundary states in the band gap. Another exciting recent development is the bottom-up synthesis (from molecular precursors) of graphene nanoribbons (GNRs) with atomic precision control of their edge and width. Here we connect these two fields, and show for the first time that semiconducting GNRs of different width, edge, and end termination belong to different topological classes. The topology of GNRs is protected by spatial symmetries and dictated by the terminating unit cell. We have derived explicit formula for their topological invariants, and show that localized junction states developed between two GNRs of distinct topology may be tuned by lateral junction geometry. The topology of a GNR can be further modified by dopants, such as a periodic array of boron atoms. In a superlattice consisted of segments of doped and pristine GNRs, the junction states are stable spin centers, forming a Heisenberg antiferromagnetic spin 1/2 chain with tunable exchange interaction. The discoveries here are not only of scientific interest for studies of quasi one-dimensional systems, but also open a new path for design principles of future GNR-based devices through their topological characters. △ Less

Submitted 15 February, 2017; v1 submitted 8 February, 2017; originally announced February 2017.

Comments: Corrected typos

Journal ref: Phys. Rev. Lett. 119, 076401 (2017)

Realization of Zero-Refractive-Index Lens with Ultralow Spherical Aberration

Authors: Xin-Tao He, Zhi-Zhen Huang, Ming-Li Chang, Shao-Zeng Xu, Fu-Li Zhao, Shao-Zhi Deng, Jun-Cong She, Jian-Wen Dong

Abstract: Optical complex materials offer unprecedented opportunity to engineer fundamental band dispersion which enables novel optoelectronic functionality and devices. Exploration of photonic Dirac cone at the center of momentum space has inspired an exceptional characteristic of zero-index, which is similar to zero effective mass in fermionic Dirac systems. Such all-dielectric zero-index photonic crystal… ▽ More Optical complex materials offer unprecedented opportunity to engineer fundamental band dispersion which enables novel optoelectronic functionality and devices. Exploration of photonic Dirac cone at the center of momentum space has inspired an exceptional characteristic of zero-index, which is similar to zero effective mass in fermionic Dirac systems. Such all-dielectric zero-index photonic crystals provide an in-plane mechanism such that the energy of the propagating waves can be well confined along the chip direction. A straightforward example is to achieve the anomalous focusing effect without longitudinal spherical aberration, when the size of zero-index lens is large enough. Here, we designed and fabricated a prototype of zero-refractive-index lens by comprising large-area silicon nanopillar array with plane-concave profile. Near-zero refractive index was quantitatively measured near 1.55 um through anomalous focusing effect, predictable by effective medium theory. The zero-index lens was also demonstrated to perform ultralow longitudinal spherical aberration. Such IC compatible device provides a new route to integrate all-silicon zero-index materials into optical communication, sensing, and modulation, and to study fundamental physics on the emergent fields of topological photonics and valley photonics. △ Less

Submitted 18 October, 2016; originally announced October 2016.

Comments: 14 pages, 4 figures

Journal ref: ACS Photonics 3, 2262 (2016)

Updated baseline for a staged Compact Linear Collider

Authors: The CLIC, CLICdp collaborations, :, M. J. Boland, U. Felzmann, P. J. Giansiracusa, T. G. Lucas, R. P. Rassool, C. Balazs, T. K. Charles, K. Afanaciev, I. Emeliantchik, A. Ignatenko, V. Makarenko, N. Shumeiko, A. Patapenka, I. Zhuk, A. C. Abusleme Hoffman, M. A. Diaz Gutierrez, M. Vogel Gonzalez, Y. Chi, X. He, G. Pei, S. Pei, G. Shu , et al. (493 additional authors not shown)

Abstract: The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-q… ▽ More The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-quark measurements. Subsequent stages will focus on measurements of rare Higgs processes, as well as searches for new physics processes and precision measurements of new states, e.g. states previously discovered at LHC or at CLIC itself. In the 2012 CLIC Conceptual Design Report, a fully optimised 3 TeV collider was presented, while the proposed lower energy stages were not studied to the same level of detail. This report presents an updated baseline staging scenario for CLIC. The scenario is the result of a comprehensive study addressing the performance, cost and power of the CLIC accelerator complex as a function of centre-of-mass energy and it targets optimal physics output based on the current physics landscape. The optimised staging scenario foresees three main centre-of-mass energy stages at 380 GeV, 1.5 TeV and 3 TeV for a full CLIC programme spanning 22 years. For the first stage, an alternative to the CLIC drive beam scheme is presented in which the main linac power is produced using X-band klystrons. △ Less

Submitted 27 March, 2017; v1 submitted 26 August, 2016; originally announced August 2016.

Comments: 57 pages, 27 figures, 12 tables, published as CERN Yellow Report. Updated version: Minor layout changes for print version

Report number: CERN-2016-004

Getting the Most Neutrinos out of IsoDAR

Authors: Emilio Ciuffoli, Hosam Mohammed, Jarah Evslin, Fengyi Zhao, Maksym Deliyergiyev

Abstract: Several experimental collaborations worldwide intend to test sterile neutrino models by measuring the disappearance of antineutrinos produced via isotope decay at rest (IsoDAR). The most advanced of these proposals have very similar setups, in which a proton beam strikes a target yielding neutrons which are absorbed by a high isotopic purity 7Li converter, yielding 8Li whose resulting decay yields… ▽ More Several experimental collaborations worldwide intend to test sterile neutrino models by measuring the disappearance of antineutrinos produced via isotope decay at rest (IsoDAR). The most advanced of these proposals have very similar setups, in which a proton beam strikes a target yielding neutrons which are absorbed by a high isotopic purity 7Li converter, yielding 8Li whose resulting decay yields the antineutrinos. In this note, we use FLUKA and GEANT4 simulations to investigate three proposed modifications of this standard proposal. In the first, the 7Li is replaced with 7Li compounds including a deuterium moderator. In the second, a gap is placed between the target and the converter to reduce the neutron bounce-back. Finally, we consider cooling the converter with liquid nitrogen. We find that these modifications can increase the antineutrino yield by as much as 50 percent. The first also substantially reduces the quantity of high purity 7Li which is needed. △ Less

Submitted 18 January, 2018; v1 submitted 30 June, 2016; originally announced June 2016.

Comments: 27 pages, 9 captioned pdf figures, v3 more detailed study of neutron transport

Journal ref: Eur.Phys.J. C77 (2017) no.12, 864

New measurement of $θ_{13}$ via neutron capture on hydrogen at Daya Bay

Authors: Daya Bay Collaboration, F. P. An, A. B. Balantekin, H. R. Band, M. Bishai, S. Blyth, D. Cao, G. F. Cao, J. Cao, W. R. Cen, Y. L. Chan, J. F. Chang, L. C. Chang, Y. Chang, H. S. Chen, Q. Y. Chen, S. M. Chen, Y. X. Chen, Y. Chen, J. H. Cheng, J. -H. Cheng, J. Cheng, Y. P. Cheng, Z. K. Cheng, J. J. Cherwinka , et al. (203 additional authors not shown)

Abstract: This article reports an improved independent measurement of neutrino mixing angle $θ_{13}$ at the Daya Bay Reactor Neutrino Experiment. Electron antineutrinos were identified by inverse $β$-decays with the emitted neutron captured by hydrogen, yielding a data-set with principally distinct uncertainties from that with neutrons captured by gadolinium. With the final two of eight antineutrino detecto… ▽ More This article reports an improved independent measurement of neutrino mixing angle $θ_{13}$ at the Daya Bay Reactor Neutrino Experiment. Electron antineutrinos were identified by inverse $β$-decays with the emitted neutron captured by hydrogen, yielding a data-set with principally distinct uncertainties from that with neutrons captured by gadolinium. With the final two of eight antineutrino detectors installed, this study used 621 days of data including the previously reported 217-day data set with six detectors. The dominant statistical uncertainty was reduced by 49%. Intensive studies of the cosmogenic muon-induced $^9$Li and fast neutron backgrounds and the neutron-capture energy selection efficiency, resulted in a reduction of the systematic uncertainty by 26%. The deficit in the detected number of antineutrinos at the far detectors relative to the expected number based on the near detectors yielded $\sin^22θ_{13} = 0.071 \pm 0.011$ in the three-neutrino-oscillation framework. The combination of this result with the gadolinium-capture result is also reported. △ Less

Submitted 25 April, 2016; v1 submitted 11 March, 2016; originally announced March 2016.

Comments: 26 pages, 23 figures

Journal ref: Phys. Rev. D 93, 072011 (2016)

Antineutrino flux and spectrum calculation for spent nuclear fuel for the Daya Bay antineutrino experiment

Authors: X. B. Ma, Y. F. Zhao, Y. X. Chen, W. L. Zhong, F. P. An

Abstract: Spent nuclear fuel (SNF) antineutrino flux is an important source of uncertainties for a reactor neutrino flux prediction. However, if one want to determine the contribution of spent fuel, many data are needed, such as the amount of spent fuel in the pool, the time after discharged from the reactor core, the burnup of each assembly, and the antineutrino spectrum of the isotopes in the spend fuel.… ▽ More Spent nuclear fuel (SNF) antineutrino flux is an important source of uncertainties for a reactor neutrino flux prediction. However, if one want to determine the contribution of spent fuel, many data are needed, such as the amount of spent fuel in the pool, the time after discharged from the reactor core, the burnup of each assembly, and the antineutrino spectrum of the isotopes in the spend fuel. A method to calculate the contribution of SNF is proposed in this study. In this method, reactor simulation code verified by experiment have been used to simulate the fuel depletion by taking into account more than 2000 isotopes and fission products, the quantity of SNF in each six spend fuel pool, and the antineutrino spectrum of SNF varying with time after SNF discharged from core. Results show that the contribution of SNF to the total antineutrino flux is about 0.26%~0.34%, and the shutdown impact is about 20%. The SNF spectrum would distort the softer part of antineutrino spectra, and the maximum contribution from SNF is about 3.0%, but there is 18\% difference between line evaluate method and under evaluate method. In addition, non-equilibrium effects are also discussed, and the results are compatible with theirs considering the uncertainties. △ Less

Submitted 19 May, 2017; v1 submitted 22 December, 2015; originally announced December 2015.

Comments: 12 pages, 8 figures

IsoDAR Neutrino Experiment Simulation with Proton and Deuteron Beams

Authors: Fengyi Zhao, Yao Li, Chengdong Han, Qiang Fu, Xurong Chen

Abstract: In this paper we consider high-intensity source of electron antineutrinos from the production and subsequent decay of 8Li. It opens a wide range of possible searches for beyond standard model physics via studies of the inverse beta decay interaction. In IsoDAR experiments Lithium 8 is a short lived beta emitter producing a high intensity anti-neutrinos, which is very suitable for making several im… ▽ More In this paper we consider high-intensity source of electron antineutrinos from the production and subsequent decay of 8Li. It opens a wide range of possible searches for beyond standard model physics via studies of the inverse beta decay interaction. In IsoDAR experiments Lithium 8 is a short lived beta emitter producing a high intensity anti-neutrinos, which is very suitable for making several important neutrino experiments. In this paper we used the GEANT4 program. to simulate neutrino production using proton and deuteron beams. We find that the neutrino production rate is about 3 times from deuteron beam than from proton beam in low energy region. △ Less

Submitted 13 September, 2015; originally announced September 2015.

Comments: 4 pages, 8 figures