Showing 1–27 of 27 results for author: Young, C

Scattering-Informed Microstructure Prediction during Lagrangian Evolution (SIMPLE) -- A data-driven framework for modeling complex fluids in flow

Authors: Charles D. Young, Patrick T. Corona, Anukta Datta, Matthew E. Helgeson, Michael D. Graham

Abstract: An overarching challenge in rheology is to develop constitutive models for complex fluids for which we lack accurate first principles theory. A further challenge is that most experiments probing dynamical structure and rheology do so only in very simple flow fields that are not characteristic of the complex deformation histories experienced by material in a processing application. A recently-devel… ▽ More An overarching challenge in rheology is to develop constitutive models for complex fluids for which we lack accurate first principles theory. A further challenge is that most experiments probing dynamical structure and rheology do so only in very simple flow fields that are not characteristic of the complex deformation histories experienced by material in a processing application. A recently-developed experimental methodology holds potential to overcome this challenge by incorporating a fluidic four-roll mill (FFoRM) into scanning small-angle x-ray scattering instrumentation (sSAXS) [Corona, P. T. et al. Sci. Rep. 8, 15559 (2018); Corona, P. T. et al. Phys. Rev. Mater 6, 045603 (2022)] to rapidly generate large data sets of scattering intensity for complex fluids along diverse Lagrangian flow histories. To exploit this uniquely rich FFoRM-sSAXS data, we propose a machine learning framework, Scattering-Informed Microstructure Prediction under Lagrangian Evolution (SIMPLE), which uses FFoRM-sSAXS data to learn an evolution equation for the scattering intensity and an associated tensorial differential constitutive equation for the stress. The framework incorporates material frame indifference and invariance to arbitrary rotations by data preprocessing. We use autoencoders to find an efficient reduced order model for the scattering intensity and neural network ordinary differential equations to predict the time evolution of the model coordinates. The framework is validated on a synthetic FFoRM-sSAXS data set for a dilute rigid rod suspension. The model accurately predicts microstructural evolution and rheology for flows that differ significantly from those used in training. SIMPLE is compatible with but does not require material-specific constraints or assumptions. △ Less

Submitted 5 May, 2023; originally announced May 2023.

3D climate simulations of the Archean find that methane has a strong cooling effect at high concentrations

Authors: Jake K. Eager-Nash, Nathan J. Mayne, Arwen E. Nicholson, Janke E. Prins, Oakley C. F. Young, Stuart J. Daines, Denis E. Sergeev, F. Hugo Lambert, James Manners, Ian A. Boutle, Eric T. Wolf, Inga E. E. Kamp, Krisztian Kohary, Tim M. Lenton

Abstract: Methane is thought to have been an important greenhouse gas during the Archean, although its potential warming has been found to be limited at high concentrations due to its high shortwave absorption. We use the Met Office Unified Model, a general circulation model, to further explore the climatic effect of different Archean methane concentrations. Surface warming peaks at a pressure ratio CH$_4$:… ▽ More Methane is thought to have been an important greenhouse gas during the Archean, although its potential warming has been found to be limited at high concentrations due to its high shortwave absorption. We use the Met Office Unified Model, a general circulation model, to further explore the climatic effect of different Archean methane concentrations. Surface warming peaks at a pressure ratio CH$_4$:CO$_2$ of approximately 0.1, reaching a maximum of up to 7 K before significant cooling above this ratio. Equator-to-pole temperature differences also tend to increase up to pCH$_4$ $\leq$300 Pa, which is driven by a difference in radiative forcing at the equator and poles by methane and a reduction in the latitudinal extend of the Hadley circulation. 3D models are important to fully capture the cooling effect of methane, due to these impacts of the circulation. △ Less

Submitted 24 February, 2023; originally announced February 2023.

Comments: 36 pages, 18 figures

Energetic electron precipitation driven by electromagnetic ion cyclotron waves from ELFIN's low altitude perspective

Authors: V. Angelopoulos, X. -J. Zhang, A. V. Artemyev, D. Mourenas, E. Tsai, C. Wilkins, A. Runov, J. Liu, D. L. Turner, W. Li, K. Khurana, R. E. Wirz, V. A. Sergeev, X. Meng, J. Wu, M. D. Hartinger, T. Raita, Y. Shen, X. An, X. Shi, M. F. Bashir, X. Shen, L. Gan, M. Qin, L. Capannolo , et al. (61 additional authors not shown)

Abstract: We review comprehensive observations of electromagnetic ion cyclotron (EMIC) wave-driven energetic electron precipitation using data from the energetic electron detector on the Electron Losses and Fields InvestigatioN (ELFIN) mission, two polar-orbiting low-altitude spinning CubeSats, measuring 50-5000 keV electrons with good pitch-angle and energy resolution. EMIC wave-driven precipitation exhibi… ▽ More We review comprehensive observations of electromagnetic ion cyclotron (EMIC) wave-driven energetic electron precipitation using data from the energetic electron detector on the Electron Losses and Fields InvestigatioN (ELFIN) mission, two polar-orbiting low-altitude spinning CubeSats, measuring 50-5000 keV electrons with good pitch-angle and energy resolution. EMIC wave-driven precipitation exhibits a distinct signature in energy-spectrograms of the precipitating-to-trapped flux ratio: peaks at 0.5 MeV which are abrupt (bursty) with significant substructure (occasionally down to sub-second timescale). Multiple ELFIN passes over the same MLT sector allow us to study the spatial and temporal evolution of the EMIC wave - electron interaction region. Using two years of ELFIN data, we assemble a statistical database of 50 events of strong EMIC wave-driven precipitation. Most reside at L=5-7 at dusk, while a smaller subset exists at L=8-12 at post-midnight. The energies of the peak-precipitation ratio and of the half-peak precipitation ratio (our proxy for the minimum resonance energy) exhibit an L-shell dependence in good agreement with theoretical estimates based on prior statistical observations of EMIC wave power spectra. The precipitation ratio's spectral shape for the most intense events has an exponential falloff away from the peak (i.e., on either side of 1.45 MeV). It too agrees well with quasi-linear diffusion theory based on prior statistics of wave spectra. Sub-MeV electron precipitation observed concurrently with strong EMIC wave-driven 1MeV precipitation has a spectral shape that is consistent with efficient pitch-angle scattering down to 200-300 keV by much less intense higher frequency EMIC waves. These results confirm the critical role of EMIC waves in driving relativistic electron losses. Nonlinear effects may abound and require further investigation. △ Less

Submitted 28 November, 2022; originally announced November 2022.

Space Weather Observations, Modeling, and Alerts in Support of Human Exploration of Mars

Authors: James L. Green, Chuanfei Dong, Michael Hesse, C. Alex Young, Vladimir Airapetian

Abstract: Space weather observations and modeling at Mars have begun but they must be significantly increased to support the future of Human Exploration on the Red Planet. A comprehensive space weather understanding of a planet without a global magnetosphere and a thin atmosphere is very different from our situation at Earth so there is substantial fundamental research remaining. It is expected that the dev… ▽ More Space weather observations and modeling at Mars have begun but they must be significantly increased to support the future of Human Exploration on the Red Planet. A comprehensive space weather understanding of a planet without a global magnetosphere and a thin atmosphere is very different from our situation at Earth so there is substantial fundamental research remaining. It is expected that the development of suitable models will lead to a comprehensive operational Mars space weather alert (MSWA) system that would provide rapid dissemination of information to Earth controllers, astronauts in transit, and those in the exploration zone (EZ) on the surface by producing alerts that are delivered rapidly and are actionable. To illustrate the importance of such a system, we use a magnetohydrodynamic code to model an extreme Carrington-type coronal mass ejection (CME) event at Mars. The results show a significant induced surface field of nearly 3000 nT on the dayside that could radically affect unprotected electrical systems that would dramatically impact human survival on Mars. Other associated problems include coronal mass ejection (CME) shock-driven acceleration of solar energetic particles producing large doses of ionizing radiation at the Martian surface. In summary, along with working more closely with international partners, the next Heliophysics Decadal Survey must include a new initiative to meet expected demands for space weather forecasting in support of humans living and working on the surface of Mars. It will require significant effort to coordinate NASA and the international community contributions. △ Less

Submitted 8 November, 2022; originally announced November 2022.

Comments: 14 pages, 3 figures, 1 table; to appear in Frontiers in Astronomy and Space Sciences

Journal ref: Front. Astron. Space Sci. 9:1023305 (2022)

Solid State Detectors and Tracking for Snowmass

Authors: A. Affolder, A. Apresyan, S. Worm, M. Albrow, D. Ally, D. Ambrose, E. Anderssen, N. Apadula, P. Asenov, W. Armstrong, M. Artuso, A. Barbier, P. Barletta, L. Bauerdick, D. Berry, M. Bomben, M. Boscardin, J. Brau, W. Brooks, M. Breidenbach, J. Buckley, V. Cairo, R. Caputo, L. Carpenter, M. Centis-Vignali , et al. (110 additional authors not shown)

Abstract: Tracking detectors are of vital importance for collider-based high energy physics (HEP) experiments. The primary purpose of tracking detectors is the precise reconstruction of charged particle trajectories and the reconstruction of secondary vertices. The performance requirements from the community posed by the future collider experiments require an evolution of tracking systems, necessitating the… ▽ More Tracking detectors are of vital importance for collider-based high energy physics (HEP) experiments. The primary purpose of tracking detectors is the precise reconstruction of charged particle trajectories and the reconstruction of secondary vertices. The performance requirements from the community posed by the future collider experiments require an evolution of tracking systems, necessitating the development of new techniques, materials and technologies in order to fully exploit their physics potential. In this article we summarize the discussions and conclusions of the 2022 Snowmass Instrumentation Frontier subgroup on Solid State and Tracking Detectors (Snowmass IF03). △ Less

Submitted 19 October, 2022; v1 submitted 8 September, 2022; originally announced September 2022.

Comments: for the Snowmass Instrumentation Frontier Solid State Detector and Tracking community

Monolithic Active Pixel Sensors on CMOS technologies

Authors: Nicole Apadula, Whitney Armstrong, James Brau, Martin Breidenbach, R. Caputo, Gabriella Carinii, Alberto Collu, Marcel Demarteau, Grzegorz Deptuch, Angelo Dragone, Gabriele Giacomini, Carl Grace, Norman Graf, Leo Greiner, Ryan Herbst, Gunther Haller, Manoj Jadhav, Sylvester Joosten, Christopher J. Kenney, C. Kierans, Jihee Kim, Thomas Markiewicz, Yuan Mei, Jessica Metcalfe, Zein-Eddine Meziani , et al. (15 additional authors not shown)

Abstract: Collider detectors have taken advantage of the resolution and accuracy of silicon detectors for at least four decades. Future colliders will need large areas of silicon sensors for low mass trackers and sampling calorimetry. Monolithic Active Pixel Sensors (MAPS), in which Si diodes and readout circuitry are combined in the same pixels, and can be fabricated in some of standard CMOS processes, are… ▽ More Collider detectors have taken advantage of the resolution and accuracy of silicon detectors for at least four decades. Future colliders will need large areas of silicon sensors for low mass trackers and sampling calorimetry. Monolithic Active Pixel Sensors (MAPS), in which Si diodes and readout circuitry are combined in the same pixels, and can be fabricated in some of standard CMOS processes, are a promising technology for high-granularity and light detectors. In this paper we review 1) the requirements on MAPS for trackers and electromagnetic calorimeters (ECal) at future colliders experiments, 2) the ongoing efforts towards dedicated MAPS for the Electron-Ion Collider (EIC) at BNL, for which the EIC Silicon Consortium was already instantiated, and 3) space-born applications for MeV $γ$-ray experiments with MAPS based trackers (AstroPix). △ Less

Submitted 28 March, 2022; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: 25 pages, 18 figures, contribution to Snowmass 2021

High-throughput discovery of chemical structure-polarity relationships combining automation and machine learning techniques

Authors: Hao Xu, **glong Lin, Qianyi Liu, Yuntian Chen, Jianning Zhang, Yang Yang, Michael C. Young, Yan Xu, Dongxiao Zhang, Fanyang Mo

Abstract: As an essential attribute of organic compounds, polarity has a profound influence on many molecular properties such as solubility and phase transition temperature. Thin layer chromatography (TLC) represents a commonly used technique for polarity measurement. However, current TLC analysis presents several problems, including the need for a large number of attempts to obtain suitable conditions, as… ▽ More As an essential attribute of organic compounds, polarity has a profound influence on many molecular properties such as solubility and phase transition temperature. Thin layer chromatography (TLC) represents a commonly used technique for polarity measurement. However, current TLC analysis presents several problems, including the need for a large number of attempts to obtain suitable conditions, as well as irreproducibility due to non-standardization. Herein, we describe an automated experiment system for TLC analysis. This system is designed to conduct TLC analysis automatically, facilitating high-throughput experimentation by collecting large experimental data under standardized conditions. Using these datasets, machine learning (ML) methods are employed to construct surrogate models correlating organic compounds' structures and their polarity using retardation factor (Rf). The trained ML models are able to predict the Rf value curve of organic compounds with high accuracy. Furthermore, the constitutive relationship between the compound and its polarity can also be discovered through these modeling methods, and the underlying mechanism is rationalized through adsorption theories. The trained ML models not only reduce the need for empirical optimization currently required for TLC analysis, but also provide general guidelines for the selection of conditions, making TLC an easily accessible tool for the broad scientific community. △ Less

Submitted 11 February, 2022; originally announced February 2022.

Journal ref: Chem 2022

An architecture for quantum networking of neutral atom processors

Authors: C. B. Young, A. Safari, P. Huft, J. Zhang, E. Oh, R. Chinnarasu, M. Saffman

Abstract: Development of a network for remote entanglement of quantum processors is an outstanding challenge in quantum information science. We propose and analyze a two-species architecture for remote entanglement of neutral atom quantum computers based on integration of optically trapped atomic qubit arrays with fast optics for photon collection. One of the atomic species is used for atom-photon entanglem… ▽ More Development of a network for remote entanglement of quantum processors is an outstanding challenge in quantum information science. We propose and analyze a two-species architecture for remote entanglement of neutral atom quantum computers based on integration of optically trapped atomic qubit arrays with fast optics for photon collection. One of the atomic species is used for atom-photon entanglement, and the other species provides local processing. We compare the achievable rates of remote entanglement generation for two optical approaches: free space photon collection with a lens and a near-concentric, long working distance resonant cavity. Laser cooling and trap** within the cavity removes the need for mechanical transport of atoms from a source region, which allows for a fast repetition rate. Using optimized values of the cavity finesse, remote entanglement generation rates $> 10^3~\rm s^{-1}$ are predicted for experimentally feasible parameters. △ Less

Submitted 19 June, 2022; v1 submitted 3 February, 2022; originally announced February 2022.

Comments: v3: minor revisions

Journal ref: Appl. Phys. B 128, 151 (2022)

Spatial Coherence of Light in Collective Spontaneous Emission

Authors: D. C. Gold, P. Huft, C. Young, A. Safari, T. G. Walker, M. Saffman, D. D. Yavuz

Abstract: When a quantum system is put into an excited state, it will decay back to the ground state through a process termed spontaneous emission. It is generally assumed that spontaneous emission between different individual emitters would not be coherent with each other; to produce coherent light one would need population inversion and stimulated emission. In this work, we show that an optically-thin ens… ▽ More When a quantum system is put into an excited state, it will decay back to the ground state through a process termed spontaneous emission. It is generally assumed that spontaneous emission between different individual emitters would not be coherent with each other; to produce coherent light one would need population inversion and stimulated emission. In this work, we show that an optically-thin ensemble of 11,000 radiating atoms spontaneously organize to produce spatially coherent light. The reason for this coherence is collective-coupling of the individual emitters via Dicke superradiance and subradiance (as opposed to amplification through stimulated emission). △ Less

Submitted 14 December, 2021; originally announced December 2021.

Comments: 12 pages, 11 figures

Experiments conducted in the burning plasma regime with inertial fusion implosions

Authors: J. S. Ross, J. E. Ralph, A. B. Zylstra, A. L. Kritcher, H. F. Robey, C. V. Young, O. A. Hurricane, D. A. Callahan, K. L. Baker, D. T. Casey, T. Doeppner, L. Divol, M. Hohenberger, S. Le Pape, A. Pak, P. K. Patel, R. Tommasini, S. J. Ali, P. A. Amendt, L. J. Atherton, B. Bachmann, D. Bailey, L. R. Benedetti, L. Berzak Hopkins, R. Betti , et al. (127 additional authors not shown)

Abstract: An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into… ▽ More An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into x-ray radiation which in turn drives the DT fuel filled capsule causing it to implode. Previous experiments reported DT fuel gain exceeding unity [O.A. Hurricane et al., Nature 506, 343 (2014)] and then exceeding the kinetic energy of the imploding fuel [S. Le Pape et al., Phys. Rev. Lett. 120, 245003 (2018)]. We report on recent experiments that have achieved record fusion neutron yields on NIF, greater than 100 kJ with momentary fusion powers exceeding 1PW, and have for the first time entered the burning plasma regime where fusion alpha-heating of the fuel exceeds the energy delivered to the fuel via compression. This was accomplished by increasing the size of the high-density carbon (HDC) capsule, increasing energy coupling, while controlling symmetry and implosion design parameters. Two tactics were successful in controlling the radiation flux symmetry and therefore the implosion symmetry: transferring energy between laser cones via plasma waves, and changing the shape of the hohlraum. In conducting these experiments, we controlled for known sources of degradation. Herein we show how these experiments were performed to produce record performance, and demonstrate the data fidelity leading us to conclude that these shots have entered the burning plasma regime. △ Less

Submitted 8 November, 2021; originally announced November 2021.

C$^3$: A "Cool" Route to the Higgs Boson and Beyond

Authors: Mei Bai, Tim Barklow, Rainer Bartoldus, Martin Breidenbach, Philippe Grenier, Zhirong Huang, Michael Kagan, John Lewellen, Zenghai Li, Thomas W. Markiewicz, Emilio A. Nanni, Mamdouh Nasr, Cho-Kuen Ng, Marco Oriunno, Michael E. Peskin, Thomas G. Rizzo, James Rosenzweig, Ariel G. Schwartzman, Vladimir Shiltsev, Evgenya Simakov, Bruno Spataro, Dong Su, Sami Tantawi, Caterina Vernieri, Glen White , et al. (1 additional authors not shown)

Abstract: We present a proposal for a cold copper distributed coupling accelerator that can provide a rapid route to precision Higgs physics with a compact 8 km footprint. This proposal is based on recent advances that increase the efficiency and operating gradient of a normal conducting accelerator. This technology also provides an $e^{+}e^{-}$ collider path to physics at multi-TeV energies. In this articl… ▽ More We present a proposal for a cold copper distributed coupling accelerator that can provide a rapid route to precision Higgs physics with a compact 8 km footprint. This proposal is based on recent advances that increase the efficiency and operating gradient of a normal conducting accelerator. This technology also provides an $e^{+}e^{-}$ collider path to physics at multi-TeV energies. In this article, we describe our vision for this technology and the near-term R&D program needed to pursue it. △ Less

Submitted 27 October, 2021; originally announced October 2021.

Comments: 34 pages, 8 figures, Contribution to Snowmass 2021. The editors can be contacted at the following addresses: [email protected], [email protected], [email protected], [email protected]

Report number: SLAC-PUB-17629

X-ray attenuation of adipose breast tissue: in-vitro and in-vivo measurements using spectral imaging

Authors: Erik Fredenberg, Klaus Erhard, Karl Berggren, David R Dance, Kenneth C Young, Bjorn Cederstrom, Henrik Johansson, Mats Lundqvist, Elin Moa, Hanno Homan, Paula Willsher, Fleur Kilburn-Toppin, Matthew Wallis

Abstract: The development of new x-ray imaging techniques often requires prior knowledge of tissue attenuation, but the sources of such information are sparse. We have measured the attenuation of adipose breast tissue using spectral imaging, in vitro and in vivo. For the in-vitro measurement, fixed samples of adipose breast tissue were imaged on a spectral mammography system, and the energy-dependent x-ray… ▽ More The development of new x-ray imaging techniques often requires prior knowledge of tissue attenuation, but the sources of such information are sparse. We have measured the attenuation of adipose breast tissue using spectral imaging, in vitro and in vivo. For the in-vitro measurement, fixed samples of adipose breast tissue were imaged on a spectral mammography system, and the energy-dependent x-ray attenuation was measured in terms of equivalent thicknesses of aluminum and poly-methyl methacrylate (PMMA). For the in-vivo measurement, a similar procedure was applied on a number of spectral screening mammograms. The results of the two measurements agreed well and were consistent with published attenuation data and with measurements on tissue-equivalent material. △ Less

Submitted 30 January, 2021; originally announced February 2021.

Comments: arXiv admin note: text overlap with arXiv:2101.02449

Journal ref: Proc. SPIE 9412, Medical Imaging 2015, 94121U

Measurement of breast-tissue x-ray attenuation by spectral mammography: first results on cyst fluid

Authors: Erik Fredenberg, David R. Dance, Paula Willsher, Elin Moa, Miriam von Tiedemann, Kenneth C. Young, Matthew G. Wallis

Abstract: Knowledge of x-ray attenuation is essential for develo** and evaluating x-ray imaging technologies. For instance, techniques to better characterize cysts at mammography screening would be highly desirable to reduce recalls, but the development is hampered by the lack of attenuation data for cysts. We have developed a method to measure x-ray attenuation of tissue samples using a prototype photon-… ▽ More Knowledge of x-ray attenuation is essential for develo** and evaluating x-ray imaging technologies. For instance, techniques to better characterize cysts at mammography screening would be highly desirable to reduce recalls, but the development is hampered by the lack of attenuation data for cysts. We have developed a method to measure x-ray attenuation of tissue samples using a prototype photon-counting spectral mammography unit. The method was applied to measure the attenuation of 50 samples of breast cyst fluid and 50 samples of water. Spectral (energy-resolved) images of the samples were acquired and the image signal was mapped to equivalent thicknesses of two known reference materials, which can be used to derive the x-ray attenuation as a function of energy. The attenuation of cyst fluid was found to be significantly different from water. There was a relatively large natural spread between different samples of cyst fluid, whereas the homogeneity of each individual sample was found to be good; the variation within samples did not reach above the quantum noise floor. The spectral method proved stable between several measurements on the same sample. Further, chemical analysis and elemental attenuation calculation were used to validate the spectral measurement on a subset of the samples. The two methods agreed within the precision of the elemental attenuation calculation over the mammographic energy range. △ Less

Submitted 7 January, 2021; originally announced January 2021.

Comments: arXiv admin note: substantial text overlap with arXiv:2101.02449

Journal ref: Phys. Med. Biol., 58(24), p.8609 (2013)

Measurement of breast-tissue x-ray attenuation by spectral imaging: fresh and fixed normal and malignant tissue

Authors: Erik Fredenberg, Paula Willsher, Elin Moa, David R. Dance, Kenneth C. Young, Matthew G. Wallis

Abstract: Knowledge of x-ray attenuation is essential for develo** and evaluating x-ray imaging technologies. In mammography, measurement of breast density, dose estimation, and differentiation between cysts and solid tumours are example applications requiring accurate data on tissue attenuation. Published attenuation data are, however, sparse and cover a relatively wide range. To supplement available dat… ▽ More Knowledge of x-ray attenuation is essential for develo** and evaluating x-ray imaging technologies. In mammography, measurement of breast density, dose estimation, and differentiation between cysts and solid tumours are example applications requiring accurate data on tissue attenuation. Published attenuation data are, however, sparse and cover a relatively wide range. To supplement available data we have previously measured the attenuation of cyst fluid and solid lesions using photon-counting spectral mammography. The present study aims to measure the attenuation of normal adipose and glandular tissue, and to measure the effect of formalin fixation, a major uncertainty in published data. A total of 27 tumour specimens, seven fibro-glandular tissue specimens, and 15 adipose tissue specimens were included. Spectral (energy-resolved) images of the samples were acquired and the image signal was mapped to equivalent thicknesses of two known reference materials, from which x-ray attenuation as a function of energy can be derived. The spread in attenuation between samples was relatively large, partly because of natural variation. The variation of malignant and glandular tissue was similar, whereas that of adipose tissue was lower. Formalin fixation slightly altered the attenuation of malignant and glandular tissue, whereas the attenuation of adipose tissue was not significantly affected. The difference in attenuation between fresh tumour tissue and cyst fluid was smaller than has previously been measured for fixed tissue, but the difference was still significant and discrimination of these two tissue types is still possible. The difference between glandular and malignant tissue was close-to significant; it is reasonable to expect a significant difference with a larger set of samples. [cropped] △ Less

Submitted 7 January, 2021; originally announced January 2021.

Journal ref: Physics in Medicine & Biology, 63(23) (2018)

Measurement of breast-tissue x-ray attenuation by spectral mammography: solid lesions

Authors: Erik Fredenberg, Fleur Kilburn-Toppin, Paula Willsher, Elin Moa, Mats Danielsson, David R. Dance, Kenneth C. Young, Matthew G. Wallis

Abstract: Knowledge of x-ray attenuation is essential for develo** and evaluating x-ray imaging technologies. For instance, techniques to distinguish between cysts and solid tumours at mammography screening would be highly desirable to reduce recalls, but the development requires knowledge of the x-ray attenuation for cysts and tumours. We have previously measured the attenuation of cyst fluid using photo… ▽ More Knowledge of x-ray attenuation is essential for develo** and evaluating x-ray imaging technologies. For instance, techniques to distinguish between cysts and solid tumours at mammography screening would be highly desirable to reduce recalls, but the development requires knowledge of the x-ray attenuation for cysts and tumours. We have previously measured the attenuation of cyst fluid using photon-counting spectral mammography. Data on x-ray attenuation for solid breast lesions are available in the literature, but cover a relatively wide range, likely caused by natural spread between samples, random measurement errors, and different experimental conditions. In this study, we have adapted the previously developed spectral method to measure the linear attenuation of solid breast lesions. A total of 56 malignant and 5 benign lesions were included in the study. The samples were placed in a holder that allowed for thickness measurement. Spectral (energy-resolved) images of the samples were acquired and the image signal was mapped to equivalent thicknesses of two known reference materials, which can be used to derive the x-ray attenuation as a function of energy. The spread in equivalent material thicknesses was relatively large between samples, which is likely to be caused mainly by natural variation and only to a minor extent by random measurement errors and sample inhomogeneity. No significant difference in attenuation was found between benign and malignant solid lesions, or between different types of malignant lesions. The separation between cyst-fluid and tumour attenuation was, however, significant, which suggests it may be possible to distinguish cystic from solid breast lesions, and the results lay the groundwork for a clinical trial. [cropped] △ Less

Submitted 7 January, 2021; originally announced January 2021.

Journal ref: Phys Med Biol, 61(7) (2016)

Dynamics and Rheology of Ring-Linear Blend Semidilute Solutions in Extensional Flow: Modeling and Molecular Simulations

Authors: Charles D. Young, Yuecheng Zhou, Charles M. Schroeder, Charles E. Sing

Abstract: We use Brownian dynamics (BD) simulations and single molecule experiments to investigate the influence of topological constraints and hydrodynamic interactions on the dynamics and rheology of solutions of ring-linear polymer blends at the overlap concentration. We find agreement between simulation and experiment in that rings in solution blends exhibit large conformational fluctuations, including… ▽ More We use Brownian dynamics (BD) simulations and single molecule experiments to investigate the influence of topological constraints and hydrodynamic interactions on the dynamics and rheology of solutions of ring-linear polymer blends at the overlap concentration. We find agreement between simulation and experiment in that rings in solution blends exhibit large conformational fluctuations, including extension overshoots in the startup of flow and tumbling and tank-treading at steady state. Ring polymer fluctuations increase with blend fraction of linear polymers and are peaked at a ring Weissenberg number $\textrm{Wi}_R \approx 1.5$. On the contrary, linear and ring polymers in pure solutions show a peak in fluctuations at the critical coil-stretch Weissenberg number $\textrm{Wi} = 0.5$. BD simulations show that extension overshoots on startup of flow are due to flow-induced intermolecular ring-linear polymer hooks, whereas fluctuations at steady state are dominated by intermolecular hydrodynamic interactions (HI). This is supported by simulations of bidisperse linear polymer solution blends, which show similar trends in conformational dynamics between rings and linear polymers with a matched contour length. Compared to BD simulations, single molecule experiments show quantitatively larger fluctuations, which could arise because experiments are performed on higher molecular weight polymers with stronger topological constraints. To this end, we have advanced the understanding of the effects of topological interactions and intermolecular HI on the dynamics of semidilute ring-linear polymer blend solutions. △ Less

Submitted 24 April, 2021; v1 submitted 2 November, 2020; originally announced November 2020.

An Update to the Letter of Intent for MATHUSLA: Search for Long-Lived Particles at the HL-LHC

Authors: Cristiano Alpigiani, Juan Carlos Arteaga-Velázquez, Austin Ball, Liron Barak, Jared Barron, Brian Batell, James Beacham, Yan Benhammo, Karen Salomé Caballero-Mora, Paolo Camarri, Roberto Cardarelli, John Paul Chou, Wentao Cui, David Curtin, Miriam Diamond, Keith R. Dienes, Liam Andrew Dougherty, Giuseppe Di Sciascio, Marco Drewes, Erez Etzion, Rouven Essig, Jared Evans, Arturo Fernández Téllez, Oliver Fischer, Jim Freeman , et al. (58 additional authors not shown)

Abstract: We report on recent progress in the design of the proposed MATHUSLA Long Lived Particle (LLP) detector for the HL-LHC, updating the information in the original Letter of Intent (LoI), see CDS:LHCC-I-031, arXiv:1811.00927. A suitable site has been identified at LHC Point 5 that is closer to the CMS Interaction Point (IP) than assumed in the LoI. The decay volume has been increased from 20 m to 25 m… ▽ More We report on recent progress in the design of the proposed MATHUSLA Long Lived Particle (LLP) detector for the HL-LHC, updating the information in the original Letter of Intent (LoI), see CDS:LHCC-I-031, arXiv:1811.00927. A suitable site has been identified at LHC Point 5 that is closer to the CMS Interaction Point (IP) than assumed in the LoI. The decay volume has been increased from 20 m to 25 m in height. Engineering studies have been made in order to locate much of the decay volume below ground, bringing the detector even closer to the IP. With these changes, a 100 m x 100 m detector has the same physics reach for large c$τ$ as the 200 m x 200 m detector described in the LoI and other studies. The performance for small c$τ$ is improved because of the proximity to the IP. Detector technology has also evolved while retaining the strip-like sensor geometry in Resistive Plate Chambers (RPC) described in the LoI. The present design uses extruded scintillator bars read out using wavelength shifting fibers and silicon photomultipliers (SiPM). Operations will be simpler and more robust with much lower operating voltages and without the use of greenhouse gases. Manufacturing is straightforward and should result in cost savings. Understanding of backgrounds has also significantly advanced, thanks to new simulation studies and measurements taken at the MATHUSLA test stand operating above ATLAS in 2018. We discuss next steps for the MATHUSLA collaboration, and identify areas where new members can make particularly important contributions. △ Less

Submitted 3 September, 2020; originally announced September 2020.

Comments: 22 pages + references, 12 Figures

Report number: CERN-LHCC-2020-014, LHCC-I-031-ADD-1

The MATHUSLA Test Stand

Authors: Maf Alidra, Cristiano Alpigiani, Austin Ball, Paolo Camarri, Roberto Cardarelli, John Paul Chou, David Curtin, Erez Etzion, Ali Garabaglu, Brandon Gomes, Roberto Guida, W. Kuykendall, Audrey Kvam, Dragoslav Lazic, H. J. Lubatti, Giovanni Marsella, Gilad Mizrachi, Antonio Policicchio, Mason Proffitt, Joe Rothberg, Rinaldo Santonico, Yiftah Silver, Steffie Ann Thayil, Emma Torro-Pastor, Gordon Watts , et al. (1 additional authors not shown)

Abstract: The rate of muons from LHC $pp$ collisions reaching the surface above the ATLAS interaction point is measured and compared with expected rates from decays of $W$ and $Z$ bosons and $b$- and $c$-quark jets. In addition, data collected during periods without beams circulating in the LHC provide a measurement of the background from cosmic ray inelastic backscattering that is compared to simulation pr… ▽ More The rate of muons from LHC $pp$ collisions reaching the surface above the ATLAS interaction point is measured and compared with expected rates from decays of $W$ and $Z$ bosons and $b$- and $c$-quark jets. In addition, data collected during periods without beams circulating in the LHC provide a measurement of the background from cosmic ray inelastic backscattering that is compared to simulation predictions. Data were recorded during 2018 in a 2.5 $\times$ 2.5 $\times$ 6.5~$\rm{m}^3$ active volume MATHUSLA test stand detector unit consisting of two scintillator planes, one at the top and one at the bottom, which defined the trigger, and six layers of RPCs between them, grouped into three $(x,y)$-measuring layers separated by 1.74 m from each other. Triggers selecting both upward-going tracks and downward-going tracks were used. △ Less

Submitted 9 September, 2020; v1 submitted 5 May, 2020; originally announced May 2020.

Comments: 18 pages, 11 figures, 1 table

Generation of 14.0W of single frequency light at 770 nm by intracavity frequency doubling

Authors: Minho Kwon, Peiyu Yang, Preston Huft, Christopher Young, Matthew Ebert, Mark Saffman

Abstract: We present a continuous, narrow-linewidth, tunable laser system that outputs up to 14.0 W at 770 nm. The light is generated by frequency doubling 18.8 W of light from a 1540 nm fiber amplifier that is seeded by a single mode diode laser achieving >74% conversion efficiency. We utilize a Lithium Triborate Crystal in an enhancement ring cavity. The low intensity noise and narrow linewidth of the 770… ▽ More We present a continuous, narrow-linewidth, tunable laser system that outputs up to 14.0 W at 770 nm. The light is generated by frequency doubling 18.8 W of light from a 1540 nm fiber amplifier that is seeded by a single mode diode laser achieving >74% conversion efficiency. We utilize a Lithium Triborate Crystal in an enhancement ring cavity. The low intensity noise and narrow linewidth of the 770 nm output are suitable for cold atom experiments. △ Less

Submitted 30 August, 2019; originally announced September 2019.

Comments: 5 pages, 6 figures

Simulation of semidilute polymer solutions in planar extensional via conformationally averaged Brownian noise

Authors: Charles D. Young, Charles E. Sing

Abstract: The interplay between concentration, flow, hydrodynamic interactions (HI), and topological interactions governing semidilute polymer dynamics in strong flows are challenging to characterize. Brownian dynamics (BD) simulations are particularly valuable as a way to direct visualize how molecular interactions arise in these systems; however, BD simulations are often computationally limited by the nee… ▽ More The interplay between concentration, flow, hydrodynamic interactions (HI), and topological interactions governing semidilute polymer dynamics in strong flows are challenging to characterize. Brownian dynamics (BD) simulations are particularly valuable as a way to direct visualize how molecular interactions arise in these systems; however, BD simulations are often computationally limited by the need to calculate the correlated Brownian noise via decomposition of the diffusion tensor. Previously we have introduced an iterative conformational averaging (CA) method for BD simulations which bypasses these limitations by preaveraging the HI and Brownian noise in an iterative procedure. In this work, we generalize the CA method to flowing semidilute solutions by introducing a conformation dependent diffusion tensor and a strain dependent approximation to the conformationally averaged Brownian noise. We find that this approach nearly quantitatively reproduces both transient and steady state polymer dynamics and rheology while achieving an order of magnitude computational acceleration. We then utilize the CA method to investigate the concentration and flow rate dependence of polymer dynamics in planar extensional flows. Our results are consistent with previous experimental and simulation studies and provide a detailed view of broad conformational distributions in the semidilute regime. We observe interconversion between stretched and coiled states at steady state, which we conjecture occur due to the effect of concentration on the conformation dependent polymer drag. Additionally, we observe transient flow-induced intermolecular hooks in the startup of flow which lead to diverse and unique stretching pathways. △ Less

Submitted 24 July, 2019; originally announced July 2019.

All-solid-state VUV frequency comb at 160 nm using multi-harmonic generation in a non-linear femtosecond enhancement cavity

Authors: J. Seres, E. Seres, C. Serrat, Erin C. Young, James S. Speck, T. Schumm

Abstract: We report on the realization of a solid-state-based vacuum ultraviolet frequency comb, using multi-harmonic generation in an external enhancement cavity. Optical conversions in such arrangements were so-far reported only using gaseous media. We present a theory that allows selecting the most suited solid generation medium for specific target harmonics by adapting the bandgap of the material. Conse… ▽ More We report on the realization of a solid-state-based vacuum ultraviolet frequency comb, using multi-harmonic generation in an external enhancement cavity. Optical conversions in such arrangements were so-far reported only using gaseous media. We present a theory that allows selecting the most suited solid generation medium for specific target harmonics by adapting the bandgap of the material. Consequently, we experimentally use a thin AlN film grown on a sapphire substrate to realize a compact frequency comb multi-harmonic source in the DUV/VUV spectral range. Extending our earlier VUV source [Opt. Exp. 26, 21900 (2018)] with the enhancement cavity, a sub-Watt level Ti:sapphire femtosecond frequency comb is enhanced to 24 W stored average power, its 3rd, 5th and 7th harmonics are generated, and the target harmonic power at 160 nm increased by two orders of magnitude. The emerging non-linear effects in the solid medium together with suitable intra-cavity dispersion management support optimal enhancement and stable locking. To demonstrate the spectroscopic ability of the realized frequency comb, we report on the beat measurement between the 3rd harmonic beam and a 266 nm CW laser reaching about 1 MHz accuracy. △ Less

Submitted 14 December, 2018; originally announced December 2018.

A Letter of Intent for MATHUSLA: a dedicated displaced vertex detector above ATLAS or CMS

Authors: Cristiano Alpigiani, Austin Ball, Liron Barak, James Beacham, Yan Benhammo, Tingting Cao, Paolo Camarri, Roberto Cardarelli, Mario Rodriguez-Cahuantzi, John Paul Chou, David Curtin, Miriam Diamond, Giuseppe Di Sciascio, Marco Drewes, Sarah C. Eno, Erez Etzion, Rouven Essig, Jared Evans, Oliver Fischer, Stefano Giagu, Brandon Gomes, Andy Haas, Yuekun Heng, Giuseppe Iaselli, Ken Johns , et al. (39 additional authors not shown)

Abstract: In this Letter of Intent (LOI) we propose the construction of MATHUSLA (MAssive Timing Hodoscope for Ultra-Stable neutraL pArticles), a dedicated large-volume displaced vertex detector for the HL-LHC on the surface above ATLAS or CMS. Such a detector, which can be built using existing technologies with a reasonable budget in time for the HL-LHC upgrade, could search for neutral long-lived particle… ▽ More In this Letter of Intent (LOI) we propose the construction of MATHUSLA (MAssive Timing Hodoscope for Ultra-Stable neutraL pArticles), a dedicated large-volume displaced vertex detector for the HL-LHC on the surface above ATLAS or CMS. Such a detector, which can be built using existing technologies with a reasonable budget in time for the HL-LHC upgrade, could search for neutral long-lived particles (LLPs) with up to several orders of magnitude better sensitivity than ATLAS or CMS, while also acting as a cutting-edge cosmic ray telescope at CERN to explore many open questions in cosmic ray and astro-particle physics. We review the physics motivations for MATHUSLA and summarize its LLP reach for several different possible detector geometries, as well as outline the cosmic ray physics program. We present several updated background studies for MATHUSLA, which help inform a first detector-design concept utilizing modular construction with Resistive Plate Chambers (RPCs) as the primary tracking technology. We present first efficiency and reconstruction studies to verify the viability of this design concept, and we explore some aspects of its total cost. We end with a summary of recent progress made on the MATHUSLA test stand, a small-scale demonstrator experiment currently taking data at CERN Point 1, and finish with a short comment on future work. △ Less

Submitted 2 November, 2018; originally announced November 2018.

Report number: CERN-LHCC-2018-025, LHCC-I-031

Test Beam Results of 3D Silicon Pixel Sensors for the ATLAS upgrade

Authors: ATLAS 3D Collaboration, P. Grenier, G. Alimonti, M. Barbero, R. Bates, E. Bolle, M. Borri, M. Boscardin, C. Buttar, M. Capua, M. Cavalli-Sforza, M. Cobal, A. Cristofoli, G-F. Dalla Betta, G. Darbo, C. Da Vià, E. Devetak, B. DeWilde, B. Di Girolamo, D. Dobos, K. Einsweiler, D. Esseni, S. Fazio, C. Fleta, J. Freestone , et al. (68 additional authors not shown)

Abstract: Results on beam tests of 3D silicon pixel sensors aimed at the ATLAS Insertable-B-Layer and High Luminosity LHC (HL-LHC)) upgrades are presented. Measurements include charge collection, tracking efficiency and charge sharing between pixel cells, as a function of track incident angle, and were performed with and without a 1.6 T magnetic field oriented as the ATLAS Inner Detector solenoid field. Sen… ▽ More Results on beam tests of 3D silicon pixel sensors aimed at the ATLAS Insertable-B-Layer and High Luminosity LHC (HL-LHC)) upgrades are presented. Measurements include charge collection, tracking efficiency and charge sharing between pixel cells, as a function of track incident angle, and were performed with and without a 1.6 T magnetic field oriented as the ATLAS Inner Detector solenoid field. Sensors were bump bonded to the front-end chip currently used in the ATLAS pixel detector. Full 3D sensors, with electrodes penetrating through the entire wafer thickness and active edge, and double-sided 3D sensors with partially overlap** bias and read-out electrodes were tested and showed comparable performance. △ Less

Submitted 21 January, 2011; originally announced January 2011.

Journal ref: Nucl.Instrum.Meth.A638:33-40,2011

Coronal Mass Ejection Detection using Wavelets, Curvelets and Ridgelets: Applications for Space Weather Monitoring

Authors: Peter T. Gallagher, C. Alex Young, Jason P. Byrne, R. T. James McAteer

Abstract: Coronal mass ejections (CMEs) are large-scale eruptions of plasma and magnetic feld that can produce adverse space weather at Earth and other locations in the Heliosphere. Due to the intrinsic multiscale nature of features in coronagraph images, wavelet and multiscale image processing techniques are well suited to enhancing the visibility of CMEs and supressing noise. However, wavelets are better… ▽ More Coronal mass ejections (CMEs) are large-scale eruptions of plasma and magnetic feld that can produce adverse space weather at Earth and other locations in the Heliosphere. Due to the intrinsic multiscale nature of features in coronagraph images, wavelet and multiscale image processing techniques are well suited to enhancing the visibility of CMEs and supressing noise. However, wavelets are better suited to identifying point-like features, such as noise or background stars, than to enhancing the visibility of the curved form of a typical CME front. Higher order multiscale techniques, such as ridgelets and curvelets, were therefore explored to characterise the morphology (width, curvature) and kinematics (position, velocity, acceleration) of CMEs. Curvelets in particular were found to be well suited to characterising CME properties in a self-consistent manner. Curvelets are thus likely to be of benefit to autonomous monitoring of CME properties for space weather applications. △ Less

Submitted 8 December, 2010; originally announced December 2010.

Comments: Accepted for publication in Advances in Space Research (3 April 2010)

Exploring the Manifold of Seismic Waves: Application to the Estimation of Arrival-Times

Authors: Kye M. Taylor, Michael J. Procopio, Christopher J. Young, Francois G. Meyer

Abstract: We propose a new method to analyze seismic time series and estimate the arrival-times of seismic waves. Our approach combines two ingredients: the times series are first lifted into a high-dimensional space using time-delay embedding; the resulting phase space is then parametrized using a nonlinear method based on the eigenvectors of the graph Laplacian. We validate our approach using a dataset of… ▽ More We propose a new method to analyze seismic time series and estimate the arrival-times of seismic waves. Our approach combines two ingredients: the times series are first lifted into a high-dimensional space using time-delay embedding; the resulting phase space is then parametrized using a nonlinear method based on the eigenvectors of the graph Laplacian. We validate our approach using a dataset of seismic events that occurred in Idaho, Montana, Wyoming, and Utah, between 2005 and 2006. Our approach outperforms methods based on singular-spectrum analysis, waveleta nalysis, and STA/LTA. △ Less

Submitted 21 July, 2010; v1 submitted 20 July, 2010; originally announced July 2010.

Comments: 21 pages, 13 figures

Preliminary results of 3D-DDTC pixel detectors for the ATLAS upgrade

Authors: A. La Rosa, M. Boscardin, G. -F. Dalla Betta, G. Darbo, C. Gemme, H. Pernegger, C. Piemonte, M. Povoli, S. Ronchin, A. Zoboli, N. Zorzi, E. Bolle, M. Borri, C. Da Via, S. Dong, S. Fazio, P. Grenier, S. Grinstein, H. Gjersdal, P. Hansson, F. Huegging, P. Jackson, M. Kocian, F. Rivero, O. Rohne , et al. (7 additional authors not shown)

Abstract: 3D Silicon sensors fabricated at FBK-irst with the Double-side Double Type Column (DDTC) approach and columnar electrodes only partially etched through p-type substrates were tested in laboratory and in a 1.35 Tesla magnetic field with a 180GeV pion beam at CERN SPS. The substrate thickness of the sensors is about 200um, and different column depths are available, with overlaps between junction c… ▽ More 3D Silicon sensors fabricated at FBK-irst with the Double-side Double Type Column (DDTC) approach and columnar electrodes only partially etched through p-type substrates were tested in laboratory and in a 1.35 Tesla magnetic field with a 180GeV pion beam at CERN SPS. The substrate thickness of the sensors is about 200um, and different column depths are available, with overlaps between junction columns (etched from the front side) and ohmic columns (etched from the back side) in the range from 110um to 150um. The devices under test were bump bonded to the ATLAS Pixel readout chip (FEI3) at SELEX SI (Rome, Italy). We report leakage current and noise measurements, results of functional tests with Am241 gamma-ray sources, charge collection tests with Sr90 beta-source and an overview of preliminary results from the CERN beam test. △ Less

Submitted 20 October, 2009; originally announced October 2009.

Comments: 8 pages, 8 figures, presented at RD09 - 9th International Conference on Large Scale Applications and Radiation Hardness of Semiconductor Detectors, 30 September - 2 October 2009, Florence, Italy

Journal ref: Proceeding of Science PoS(RD09)032 (2009)

Sub-dekahertz ultraviolet spectroscopy of 199Hg+

Authors: R. J. Rafac, B. C. Young, J. A. Beall, W. M. Itano, D. J. Wineland, J. C. Bergquist

Abstract: Using a laser that is frequency-locked to a Fabry-Perot etalon of high finesse and stability, we probe the 5d10 6s 2S_1/2 (F=0) - 5d9 6s 2D_5/2 (F=2) Delta-m_F = 0 electric-quadrupole transition of a single laser-cooled 199Hg+ ion stored in a cryogenic radio-frequency ion trap. We observe Fourier-transform limited linewidths as narrow as 6.7 Hz at 282 nm (1.06 X 10^15 Hz), yielding a line Q = 1.… ▽ More Using a laser that is frequency-locked to a Fabry-Perot etalon of high finesse and stability, we probe the 5d10 6s 2S_1/2 (F=0) - 5d9 6s 2D_5/2 (F=2) Delta-m_F = 0 electric-quadrupole transition of a single laser-cooled 199Hg+ ion stored in a cryogenic radio-frequency ion trap. We observe Fourier-transform limited linewidths as narrow as 6.7 Hz at 282 nm (1.06 X 10^15 Hz), yielding a line Q = 1.6 X 10^14. We perform a preliminary measurement of the 5d9 6s2 2D_5/2 electric-quadrupole shift due to interaction with the static fields of the trap, and discuss the implications for future trapped-ion optical frequency standards. △ Less

Submitted 30 June, 2000; originally announced July 2000.

Comments: 4 pages, 4 figures, submitted for publication