Showing 1–50 of 163 results for author: Young, A

Light Dark Matter Constraints from SuperCDMS HVeV Detectors Operated Underground with an Anticoincidence Event Selection

Authors: SuperCDMS Collaboration, M. F. Albakry, I. Alkhatib, D. Alonso-González, D. W. P. Amaral, J. Anczarski, T. Aralis, T. Aramaki, I. J. Arnquist, I. Ataee Langroudy, E. Azadbakht, C. Bathurst, R. Bhattacharyya, A. J. Biffl, P. L. Brink, M. Buchanan, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, M. Chaudhuri, J. -H. Chen , et al. (115 additional authors not shown)

Abstract: This article presents constraints on dark-matter-electron interactions obtained from the first underground data-taking campaign with multiple SuperCDMS HVeV detectors operated in the same housing. An exposure of 7.63 g-days is used to set upper limits on the dark-matter-electron scattering cross section for dark matter masses between 0.5 and 1000 MeV/$c^2$, as well as upper limits on dark photon k… ▽ More This article presents constraints on dark-matter-electron interactions obtained from the first underground data-taking campaign with multiple SuperCDMS HVeV detectors operated in the same housing. An exposure of 7.63 g-days is used to set upper limits on the dark-matter-electron scattering cross section for dark matter masses between 0.5 and 1000 MeV/$c^2$, as well as upper limits on dark photon kinetic mixing and axion-like particle axioelectric coupling for masses between 1.2 and 23.3 eV/$c^2$. Compared to an earlier HVeV search, sensitivity was improved as a result of an increased overburden of 225 meters of water equivalent, an anticoincidence event selection, and better pile-up rejection. In the case of dark-matter-electron scattering via a heavy mediator, an improvement by up to a factor of 25 in cross-section sensitivity was achieved. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Comments: 7 pages + title and references, 4 figures, and 1 table

Optical Imaging of Flavor Order in Flat Band Graphene

Authors: Tian Xie, Tobias M. Wolf, Siyuan Xu, Zhiyuan Cui, Richen Xiong, Yunbo Ou, Patrick Hays, Ludwig F Holleis, Yi Guo, Owen I Sheekey, Caitlin Patterson, Trevor Arp, Kenji Watanabe, Takashi Taniguchi, Seth Ariel Tongay, Andrea F Young, Allan H. MacDonald, Chenhao **

Abstract: Spin and valley flavor polarization plays a central role in the many-body physics of flat band graphene, with fermi surface reconstructions often accompanied by quantized anomalous Hall and superconducting state observed in a variety of experimental systems. Here we describe an optical technique that sensitively and selectively detects flavor textures via the exciton response of a proximal transit… ▽ More Spin and valley flavor polarization plays a central role in the many-body physics of flat band graphene, with fermi surface reconstructions often accompanied by quantized anomalous Hall and superconducting state observed in a variety of experimental systems. Here we describe an optical technique that sensitively and selectively detects flavor textures via the exciton response of a proximal transition metal dichalcogenide layer. Through a systematic study of rhombohedral and rotationally faulted graphene bilayers and trilayers, we show that when the semiconducting dichalcogenide is in direct contact with the graphene, the exciton response is most sensitive to the large momentum rearrangement of the Fermi surface, providing information that is distinct from and complementary to electrical compressibility measurements. The wide-field imaging capability of optical probes allows us to obtain spatial maps of flavor orders with high throughput, and with broad temperature and device compatibility. Our work paves the way for optical probing and imaging of flavor orders in flat band graphene systems. △ Less

Submitted 13 May, 2024; originally announced May 2024.

Comments: 29 pages, 4 figures, with supplementary materials

YAP:Ce scintillator as an absolute ultracold neutron detector

Authors: M. Krivoš, Z. Tang, N. Floyd, C. L. Morris, M. Blatnik, C. Cude-Woods, S. M. Clayton, A. T. Holley, T. M. Ito, C. -Y. Liu, M. Makela, I. F. Martinez, A. S. C. Navazo, C. M. O'Shaughnessy, E. L. Renner, R. W. Pattie, A. R. Young

Abstract: The upcoming UCNProBe experiment at Los Alamos National Laboratory will measure the $β$-decay rate of free neutrons with different systematic uncertainties than previous beam-based neutron lifetime experiments. We have developed a new $^{10}$B-coated YAP:Ce scintillator whose properties are presented. The advantage of the YAP:Ce scintillator is its high Fermi potential, which reduces the probabili… ▽ More The upcoming UCNProBe experiment at Los Alamos National Laboratory will measure the $β$-decay rate of free neutrons with different systematic uncertainties than previous beam-based neutron lifetime experiments. We have developed a new $^{10}$B-coated YAP:Ce scintillator whose properties are presented. The advantage of the YAP:Ce scintillator is its high Fermi potential, which reduces the probability for upscattering of ultracold neutrons, and its short decay time, which is important at high counting rates. Birks' coefficient of YAP:Ce was measured to be ($5.56^{+0.05}_{-0.30})\times 10^{-4}$ cm/MeV and light losses due to 120 nm of $^{10}$B-coating to be about 60%. The loss of light from YAP:Ce due to transmission through deuterated polystyrene scintillator was about 50%. The efficiency for counting neutrons that are captured on the $^{10}$B coating is (86.82 $\pm$ 2.61)%. Measurement with ultracold neutrons showed that YAP:Ce crystal counted 8% to 28% more UCNs compared to ZnS screen. This may be due to an uneven coating of $^{10}$B on the rough surface. △ Less

Submitted 27 March, 2024; originally announced May 2024.

Multi-qubit gates and 'Schrödinger cat' states in an optical clock

Authors: Alec Cao, William J. Eckner, Theodor Lukin Yelin, Aaron W. Young, Sven Jandura, Lingfeng Yan, Kyungtae Kim, Guido Pupillo, Jun Ye, Nelson Darkwah Oppong, Adam M. Kaufman

Abstract: Many-particle entanglement is a key resource for achieving the fundamental precision limits of a quantum sensor. Optical atomic clocks, the current state-of-the-art in frequency precision, are a rapidly emerging area of focus for entanglement-enhanced metrology. Augmenting tweezer-based clocks featuring microscopic control and detection with the high-fidelity entangling gates developed for atom-ar… ▽ More Many-particle entanglement is a key resource for achieving the fundamental precision limits of a quantum sensor. Optical atomic clocks, the current state-of-the-art in frequency precision, are a rapidly emerging area of focus for entanglement-enhanced metrology. Augmenting tweezer-based clocks featuring microscopic control and detection with the high-fidelity entangling gates developed for atom-array information processing offers a promising route towards leveraging highly entangled quantum states for improved optical clocks. Here we develop and employ a family of multi-qubit Rydberg gates to generate 'Schrödinger cat' states of the Greenberger-Horne-Zeilinger (GHZ) type with up to 9 optical clock qubits in a programmable atom array. In an atom-laser comparison at sufficiently short dark times, we demonstrate a fractional frequency instability below the standard quantum limit using GHZ states of up to 4 qubits. A key challenge to improving the optimal achievable clock precision with GHZ states is their reduced dynamic range. Towards overcoming this hurdle, we simultaneously prepare a cascade of varying-size GHZ states to perform unambiguous phase estimation over an extended interval. These results demonstrate key building blocks for approaching Heisenberg-limited scaling of optical atomic clock precision. △ Less

Submitted 25 February, 2024; originally announced February 2024.

Comments: 19 pages, 6 figures

4x2 Hot electron bolometer mixer arrays for detection at 1.46, 1.9 and 4.7 THz for a balloon borne terahertz observatory

Authors: José R. G. Silva, Wouter M. Laauwen, Behnam Mirzaei, Nathan Vercruyssen, Matvey Finkel, Menno Westerveld, Nikhil More, Vitor Silva, Abram Young, Craig Kulesa, Christopher Walker, Floris van der Tak, Jian Rong Gao

Abstract: We have demonstrated three 4x2 hot electron bolometer (HEB) mixer arrays for operation at local oscillator (LO) frequencies of 1.46, 1.9 and 4.7 THz, respectively. They consist of spiral antenna coupled NbN HEB mixers combined with elliptical lenses. These are to date the highest pixel count arrays using a quasi-optical coupling scheme at supra-THz frequencies. At 1.4 THz, we measured an average d… ▽ More We have demonstrated three 4x2 hot electron bolometer (HEB) mixer arrays for operation at local oscillator (LO) frequencies of 1.46, 1.9 and 4.7 THz, respectively. They consist of spiral antenna coupled NbN HEB mixers combined with elliptical lenses. These are to date the highest pixel count arrays using a quasi-optical coupling scheme at supra-THz frequencies. At 1.4 THz, we measured an average double sideband mixer noise temperature of 330 K, a mixer conversion loss of 5.7 dB, and an optimum LO power of 210 nW. The array at 1.9 THz has an average mixer noise temperature of 420K, a conversion loss of 6.9 dB, and an optimum LO power of 190 nW. For the array at 4.7 THz, we obtained an average mixer noise temperature of 700 K, a conversion loss of 9.7 dB, and an optimum LO power of 240 nW. We found the arrays to be uniform regarding the mixer noise temperature with a standard deviation of 3-4%, the conversion loss with a standard deviation of 7-10%, and optimum LO power with a standard deviation of 5-6%. The noise bandwidth was also measured, being 3.5 GHz for the three arrays. These performances are comparable to previously reported values in the literature for single pixels and also other detector arrays. Our arrays meet the requirements of the Galactic/Extra-Galactic ULDB Spectroscopic Terahertz Observatory (GUSTO), a NASA balloon borne observatory, and are therefore scheduled to fly as part of the payload, which is expected to be launched in December 2023. △ Less

Submitted 9 November, 2023; originally announced November 2023.

Two-Stage Cryogenic HEMT Based Amplifier For Low Temperature Detectors

Authors: J. Anczarski, M. Dubovskov, C. W. Fink, S. Kevane, N. A. Kurinsky, A. Mazumdar, S. J. Meijer, A. Phipps, F. Ronning, I. Rydstrom, A. Simchony, Z. Smith, S. M. Thomas, S. L. Watkins, B. A. Young

Abstract: To search for dark matter candidates with masses below $\mathcal{O}$(MeV), the SPLENDOR (Search for Particles of Light dark mattEr with Narrow-gap semiconDuctORs) experiment is develo** novel narrow-bandgap semiconductors with electronic bandgaps on the order of 1-100 meV. In order to detect the charge signal produced by scattering or absorption events, SPLENDOR has designed a two-stage cryogeni… ▽ More To search for dark matter candidates with masses below $\mathcal{O}$(MeV), the SPLENDOR (Search for Particles of Light dark mattEr with Narrow-gap semiconDuctORs) experiment is develo** novel narrow-bandgap semiconductors with electronic bandgaps on the order of 1-100 meV. In order to detect the charge signal produced by scattering or absorption events, SPLENDOR has designed a two-stage cryogenic HEMT-based amplifier with an estimated charge resolution approaching the single-electron level. A low-capacitance ($\sim$1.6 pF) HEMT is used as a buffer stage at $T=10\,\mathrm{mK}$ to mitigate effects of stray capacitance at the input. The buffered signal is then amplified by a higher-capacitance ($\sim$200 pF) HEMT amplifier stage at $T=4\,\mathrm{K}$. Importantly, the design of this amplifier makes it usable with any insulating material - allowing for rapid prototy** of a variety of novel detector materials. We present the two-stage cryogenic amplifier design, preliminary voltage noise performance, and estimated charge resolution of 7.2 electrons. △ Less

Submitted 26 January, 2024; v1 submitted 3 November, 2023; originally announced November 2023.

Comments: 4 pages, 3 figures, 1 table, conference proceedings for LTD20

Report number: LA-UR-24-20758

Journal ref: J. Low Temp. Phys. 214, 256 (2024)

Transverse Emittance Reduction in Muon Beams by Ionization Cooling

Authors: The MICE Collaboration, M. Bogomilov, R. Tsenov, G. Vankova-Kirilova, Y. P. Song, J. Y. Tang, Z. H. Li, R. Bertoni, M. Bonesini, F. Chignoli, R. Mazza, A. de Bari, D. Orestano, L. Tortora, Y. Kuno, H. Sakamoto, A. Sato, S. Ishimoto, M. Chung, C. K. Sung, F. Filthaut, M. Fedorov, D. Jokovic, D. Maletic, M. Savic , et al. (112 additional authors not shown)

Abstract: Accelerated muon beams have been considered for next-generation studies of high-energy lepton-antilepton collisions and neutrino oscillations. However, high-brightness muon beams have not yet been produced. The main challenge for muon acceleration and storage stems from the large phase-space volume occupied by the beam, derived from the muon production mechanism through the decay of pions from pro… ▽ More Accelerated muon beams have been considered for next-generation studies of high-energy lepton-antilepton collisions and neutrino oscillations. However, high-brightness muon beams have not yet been produced. The main challenge for muon acceleration and storage stems from the large phase-space volume occupied by the beam, derived from the muon production mechanism through the decay of pions from proton collisions. Ionization cooling is the technique proposed to decrease the muon beam phase-space volume. Here we demonstrate a clear signal of ionization cooling through the observation of transverse emittance reduction in beams that traverse lithium hydride or liquid hydrogen absorbers in the Muon Ionization Cooling Experiment (MICE). The measurement is well reproduced by the simulation of the experiment and the theoretical model. The results shown here represent a substantial advance towards the realization of muon-based facilities that could operate at the energy and intensity frontiers. △ Less

Submitted 13 October, 2023; v1 submitted 9 October, 2023; originally announced October 2023.

Comments: 23 pages and 5 figures

Report number: STFC-P-2023-004

Smart pixel sensors: towards on-sensor filtering of pixel clusters with deep learning

Authors: Jieun Yoo, Jennet Dickinson, Morris Swartz, Giuseppe Di Guglielmo, Alice Bean, Douglas Berry, Manuel Blanco Valentin, Karri DiPetrillo, Farah Fahim, Lindsey Gray, James Hirschauer, Shruti R. Kulkarni, Ron Lipton, Petar Maksimovic, Corrinne Mills, Mark S. Neubauer, Benjamin Parpillon, Gauri Pradhan, Chinar Syal, Nhan Tran, Dahai Wen, Aaron Young

Abstract: Highly granular pixel detectors allow for increasingly precise measurements of charged particle tracks. Next-generation detectors require that pixel sizes will be further reduced, leading to unprecedented data rates exceeding those foreseen at the High Luminosity Large Hadron Collider. Signal processing that handles data incoming at a rate of O(40MHz) and intelligently reduces the data within the… ▽ More Highly granular pixel detectors allow for increasingly precise measurements of charged particle tracks. Next-generation detectors require that pixel sizes will be further reduced, leading to unprecedented data rates exceeding those foreseen at the High Luminosity Large Hadron Collider. Signal processing that handles data incoming at a rate of O(40MHz) and intelligently reduces the data within the pixelated region of the detector at rate will enhance physics performance at high luminosity and enable physics analyses that are not currently possible. Using the shape of charge clusters deposited in an array of small pixels, the physical properties of the traversing particle can be extracted with locally customized neural networks. In this first demonstration, we present a neural network that can be embedded into the on-sensor readout and filter out hits from low momentum tracks, reducing the detector's data volume by 54.4-75.4%. The network is designed and simulated as a custom readout integrated circuit with 28 nm CMOS technology and is expected to operate at less than 300 $μW$ with an area of less than 0.2 mm$^2$. The temporal development of charge clusters is investigated to demonstrate possible future performance gains, and there is also a discussion of future algorithmic and technological improvements that could enhance efficiency, data reduction, and power per area. △ Less

Submitted 3 October, 2023; originally announced October 2023.

The Superconducting Quasiparticle-Amplifying Transmon: A Qubit-Based Sensor for meV Scale Phonons and Single THz Photons

Authors: Caleb W. Fink, Chiara P. Salemi, Betty A. Young, David I. Schuster, Noah A. Kurinsky

Abstract: With great interest from the quantum computing community, an immense amount of R&D effort has been invested into improving superconducting qubits. The technologies developed for the design and fabrication of these qubits can be directly applied to applications for ultra-low threshold particle detectors, e.g. low-mass dark matter and far-IR photon sensing. We propose a novel sensor based on the tra… ▽ More With great interest from the quantum computing community, an immense amount of R&D effort has been invested into improving superconducting qubits. The technologies developed for the design and fabrication of these qubits can be directly applied to applications for ultra-low threshold particle detectors, e.g. low-mass dark matter and far-IR photon sensing. We propose a novel sensor based on the transmon qubit architecture combined with a signal-enhancing superconducting quasiparticle amplification stage. We refer to these sensors as SQUATs: Superconducting Quasiparticle-Amplifying Transmons. We detail the operating principle and design of this new sensor and predict that with minimal R&D effort, solid-state based detectors patterned with these sensors can achieve sensitivity to single THz photons, and sensitivity to $1\,\mathrm{meV}$ phonons in the detector absorber substrate on the $μ\mathrm{s}$ timescale. △ Less

Submitted 13 June, 2024; v1 submitted 2 October, 2023; originally announced October 2023.

Comments: Updated a few appendices

Report number: LA-UR-23-30997

Scintillation characteristics of the EJ-299-02H scintillator

Authors: N. Floyd, Md. T. Hassan, Z. Tang, M. Krivos, M. Blatnik, S. M. Clayton, C. Cude-Woods, A. T. Holley, T. M. Ito, B. A. Johnson, C. -Y. Liu, M. Makela, C. L. Morris, A. S. C. Navazo, C. M. O'Shaughnessy, E. L. Renner, R. W. Pattie, A. R. Young

Abstract: A study of the dead layer thickness and quenching factor of a plastic scintillator for use in ultracold neutron (UCN) experiments is described. Alpha spectroscopy was used to determine the thickness of a thin surface dead layer, and the relative light outputs from the decay of $^{241}$Am and Compton scattering of electrons were used to extract the quenching parameter. With these characteristics of… ▽ More A study of the dead layer thickness and quenching factor of a plastic scintillator for use in ultracold neutron (UCN) experiments is described. Alpha spectroscopy was used to determine the thickness of a thin surface dead layer, and the relative light outputs from the decay of $^{241}$Am and Compton scattering of electrons were used to extract the quenching parameter. With these characteristics of the material known, the light yield of the scintillator can be calculated. The ability to make these scintillators deuterated, accompanied by its relatively thin dead layer, make it ideal for use in UCN experiment, where the light yield of decay electrons and alphas from neutron capture are critical for counting events. △ Less

Submitted 27 March, 2024; v1 submitted 29 September, 2023; originally announced October 2023.

HighNESS Conceptual Design Report: Volume I

Authors: V. Santoro, O. Abou El Kheir, D. Acharya, M. Akhyani, K. H. Andersen, J. Barrow, P. Bentley, M. Bernasconi, M. Bertelsen, Y. Bessler, A. Bianchi, G. Brooijmans, L. Broussard, T. Brys, M. Busi, D. Campi, A. Chambon, J. Chen, V. Czamler, P. Deen, D. D. DiJulio, E. Dian, L. Draskovits, K. Dunne, M. El Barbari , et al. (65 additional authors not shown)

Abstract: The European Spallation Source, currently under construction in Lund, Sweden, is a multidisciplinary international laboratory. Once completed to full specifications, it will operate the world's most powerful pulsed neutron source. Supported by a 3 million Euro Research and Innovation Action within the EU Horizon 2020 program, a design study (HighNESS) has been completed to develop a second neutron… ▽ More The European Spallation Source, currently under construction in Lund, Sweden, is a multidisciplinary international laboratory. Once completed to full specifications, it will operate the world's most powerful pulsed neutron source. Supported by a 3 million Euro Research and Innovation Action within the EU Horizon 2020 program, a design study (HighNESS) has been completed to develop a second neutron source located below the spallation target. Compared to the first source, designed for high cold and thermal brightness, the new source has been optimized to deliver higher intensity, and a shift to longer wavelengths in the spectral regions of cold (CN, 2--20\,Å), very cold (VCN, 10--120\,Å), and ultracold (UCN, ${>}\,{500}$\,Å) neutrons. The second source comprises a large liquid deuterium moderator designed to produce CN and support secondary VCN and UCN sources. Various options have been explored in the proposed designs, aiming for world-leading performance in neutronics. These designs will enable the development of several new instrument concepts and facilitate the implementation of a high-sensitivity neutron-antineutron oscillation experiment (NNBAR). This document serves as the Conceptual Design Report for the HighNESS project, representing its final deliverable. △ Less

Submitted 28 May, 2024; v1 submitted 29 September, 2023; originally announced September 2023.

Comments: 269 pages, 255 figures. Volume I of the final deliverable of the HighNESS Project (HORIZON 2020 grant agreement ID: 951782)

Design principles for >90% efficiency and >99% indistinguishability broadband quantum dot cavities

Authors: David Dlaka, Petros Androvitsaneas, Andrew Young, Qirui Ma, Edmund Harbord, Ruth Oulton

Abstract: Quantum dots have the potential to be the brightest deterministic single photon source with plausible high end applications in quantum computing and cluster state generation. In this work, we re-examine the design of simple micropillars by meticulously examining the structural effects of the decay into leaky channels beyond the atom-like cavity estimation. We show that precise control of the side… ▽ More Quantum dots have the potential to be the brightest deterministic single photon source with plausible high end applications in quantum computing and cluster state generation. In this work, we re-examine the design of simple micropillars by meticulously examining the structural effects of the decay into leaky channels beyond the atom-like cavity estimation. We show that precise control of the side losses with the diameter and avoidance of propagating Bloch modes in the DBR structure can result in easy to manufacture broadband (Q$\approx750-2500$) micropillars and demonstrate extremely high internal efficiency ($90.5\%-96.4\%$). We also demonstrate that such cavities naturally decouple from the phonon sideband, with the phonon sideband reducing by a factor of $5-33$ allowing us to predict that the photons should show $99.2\%-99.8\%$ indistinguishability. △ Less

Submitted 6 September, 2023; originally announced September 2023.

An atomic boson sampler

Authors: Aaron W. Young, Shawn Geller, William J. Eckner, Nathan Schine, Scott Glancy, Emanuel Knill, Adam M. Kaufman

Abstract: A boson sampler implements a restricted model of quantum computing. It is defined by the ability to sample from the distribution resulting from the interference of identical bosons propagating according to programmable, non-interacting dynamics. Here, we demonstrate a new combination of tools for implementing boson sampling using ultracold atoms in a two-dimensional, tunnel-coupled optical lattice… ▽ More A boson sampler implements a restricted model of quantum computing. It is defined by the ability to sample from the distribution resulting from the interference of identical bosons propagating according to programmable, non-interacting dynamics. Here, we demonstrate a new combination of tools for implementing boson sampling using ultracold atoms in a two-dimensional, tunnel-coupled optical lattice. These tools include fast and programmable preparation of large ensembles of nearly identical bosonic atoms ($99.5^{+0.5}_{-1.6}\;\%$ indistinguishability) by means of rearrangement with optical tweezers and high-fidelity optical cooling, propagation for variable evolution time in the lattice with low loss ($5.0(2)\;\%$, independent of evolution time), and high fidelity detection of the atom positions after their evolution (typically $99.8(1)\;\%$). With this system, we study specific instances of boson sampling involving up to $180$ atoms distributed among $\sim 1000$ sites in the lattice. Direct verification of a given boson sampling distribution is not feasible in this regime. Instead, we introduce and perform targeted tests to determine the indistinguishability of the prepared atoms, to characterize the applied family of single particle unitaries, and to observe expected bunching features due to interference for a large range of atom numbers. When extended to interacting systems, our work demonstrates the core capabilities required to directly assemble ground and excited states in simulations of various Hubbard models. △ Less

Submitted 8 July, 2024; v1 submitted 13 July, 2023; originally announced July 2023.

Comments: 20 pages, 7 figures (main text and methods); 8 pages, 2 figures (supplemental materials)

Journal ref: Nature 629, 311-316 (2024)

Demonstration of Sub-micron UCN Position Resolution using Room-temperature CMOS Sensor

Authors: S. Lin, J. K. Baldwin, M. Blatnik, S. M. Clayton, C. Cude-Woods, S. A. Currie, B. Filippone, E. M. Fries, P. Geltenbort, A. T. Holley, W. Li, C. Y. Liu, M. Makela, C. L. Morris, R. Musedinovic, C. O'Shaughnessy, R. W. Pattie, D. J. Salvat, A. Saunders, E. I. Sharapov, M. Singh, X. Sun, Z. Tang, W. Uhrich, W. Wei , et al. (3 additional authors not shown)

Abstract: High spatial resolution of ultracold neutron (UCN) measurement is of growing interest to UCN experiments such as UCN spectrometers, UCN polarimeters, quantum physics of UCNs, and quantum gravity. Here we utilize physics-informed deep learning to enhance the experimental position resolution and to demonstrate sub-micron spatial resolutions for UCN position measurements obtained using a room-tempera… ▽ More High spatial resolution of ultracold neutron (UCN) measurement is of growing interest to UCN experiments such as UCN spectrometers, UCN polarimeters, quantum physics of UCNs, and quantum gravity. Here we utilize physics-informed deep learning to enhance the experimental position resolution and to demonstrate sub-micron spatial resolutions for UCN position measurements obtained using a room-temperature CMOS sensor, extending our previous work [1, 2] that demonstrated a position uncertainty of 1.5 microns. We explore the use of the open-source software Allpix Squared to generate experiment-like synthetic hit images with ground-truth position labels. We use physics-informed deep learning by training a fully-connected neural network (FCNN) to learn a map** from input hit images to output hit position. The automated analysis for sub-micron position resolution in UCN detection combined with the fast data rates of current and next generation UCN sources will enable improved precision for future UCN research and applications. △ Less

Submitted 16 May, 2023; originally announced May 2023.

Realizing spin squeezing with Rydberg interactions in a programmable optical clock

Authors: William J. Eckner, Nelson Darkwah Oppong, Alec Cao, Aaron W. Young, William R. Milner, John M. Robinson, Jun Ye, Adam M. Kaufman

Abstract: Neutral-atom arrays trapped in optical potentials are a powerful platform for studying quantum physics, combining precise single-particle control and detection with a range of tunable entangling interactions. For example, these capabilities have been leveraged for state-of-the-art frequency metrology as well as microscopic studies of entangled many-particle states. In this work, we combine these a… ▽ More Neutral-atom arrays trapped in optical potentials are a powerful platform for studying quantum physics, combining precise single-particle control and detection with a range of tunable entangling interactions. For example, these capabilities have been leveraged for state-of-the-art frequency metrology as well as microscopic studies of entangled many-particle states. In this work, we combine these applications to realize spin squeezing - a widely studied operation for producing metrologically useful entanglement - in an optical atomic clock based on a programmable array of interacting optical qubits. In this first demonstration of Rydberg-mediated squeezing with a neutral-atom optical clock, we generate states that have almost 4 dB of metrological gain. Additionally, we perform a synchronous frequency comparison between independent squeezed states and observe a fractional frequency stability of $1.087(1)\times 10^{-15}$ at one-second averaging time, which is 1.94(1) dB below the standard quantum limit, and reaches a fractional precision at the $10^{-17}$ level during a half-hour measurement. We further leverage the programmable control afforded by optical tweezer arrays to apply local phase shifts in order to explore spin squeezing in measurements that operate beyond the relative coherence time with the optical local oscillator. The realization of this spin-squeezing protocol in a programmable atom-array clock opens the door to a wide range of quantum-information inspired techniques for optimal phase estimation and Heisenberg-limited optical atomic clocks. △ Less

Submitted 23 July, 2023; v1 submitted 14 March, 2023; originally announced March 2023.

Comments: 13 pages, 4 figures; Supplementary Information

Journal ref: Nature 621, 734 (2023)

First measurement of the nuclear-recoil ionization yield in silicon at 100 eV

Authors: M. F. Albakry, I. Alkhatib, D. Alonso, D. W. P. Amaral, P. An, T. Aralis, T. Aramaki, I. J. Arnquist, I. Ataee Langroudy, E. Azadbakht, S. Banik, P. S. Barbeau, C. Bathurst, R. Bhattacharyya, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, M. Chaudhuri, R. Chen, N. Chott , et al. (115 additional authors not shown)

Abstract: We measured the nuclear--recoil ionization yield in silicon with a cryogenic phonon-sensitive gram-scale detector. Neutrons from a mono-energetic beam scatter off of the silicon nuclei at angles corresponding to energy depositions from 4\,keV down to 100\,eV, the lowest energy probed so far. The results show no sign of an ionization production threshold above 100\,eV. These results call for furthe… ▽ More We measured the nuclear--recoil ionization yield in silicon with a cryogenic phonon-sensitive gram-scale detector. Neutrons from a mono-energetic beam scatter off of the silicon nuclei at angles corresponding to energy depositions from 4\,keV down to 100\,eV, the lowest energy probed so far. The results show no sign of an ionization production threshold above 100\,eV. These results call for further investigation of the ionization yield theory and a comprehensive determination of the detector response function at energies below the keV scale. △ Less

Submitted 3 March, 2023; originally announced March 2023.

Journal ref: Physical Review Letters 131.9 (2023): 091801

Electromagnetic modeling and science reach of DMRadio-m$^3$

Authors: DMRadio Collaboration, A. AlShirawi, C. Bartram, J. N. Benabou, L. Brouwer, S. Chaudhuri, H. -M. Cho, J. Corbin, W. Craddock, A. Droster, J. W. Foster, J. T. Fry, P. W. Graham, R. Henning, K. D. Irwin, F. Kadribasic, Y. Kahn, A. Keller, R. Kolevatov, S. Kuenstner, N. Kurita, A. F. Leder, D. Li, J. L. Ouellet, K. M. W. Pappas , et al. (12 additional authors not shown)

Abstract: DMRadio-m$^3$ is an experiment that is designed to be sensitive to KSVZ and DFSZ QCD axion models in the 10-200 MHz (41 neV$/c^2$ - 0.83 $μ$eV/$c^2$) range. The experiment uses a solenoidal dc magnetic field to convert an axion dark-matter signal to an ac electromagnetic response in a coaxial copper pickup. The current induced by this axion signal is measured by dc SQUIDs. In this work, we present… ▽ More DMRadio-m$^3$ is an experiment that is designed to be sensitive to KSVZ and DFSZ QCD axion models in the 10-200 MHz (41 neV$/c^2$ - 0.83 $μ$eV/$c^2$) range. The experiment uses a solenoidal dc magnetic field to convert an axion dark-matter signal to an ac electromagnetic response in a coaxial copper pickup. The current induced by this axion signal is measured by dc SQUIDs. In this work, we present the electromagnetic modeling of the response of the experiment to an axion signal over the full frequency range of DMRadio-m$^3$, which extends from the low-frequency, lumped-element limit to a regime where the axion Compton wavelength is only a factor of two larger than the detector size. With these results, we determine the live time and sensitivity of the experiment. The primary science goal of sensitivity to DFSZ axions across 30-200 MHz can be achieved with a $3σ$ live scan time of 3.7 years. △ Less

Submitted 27 February, 2023; originally announced February 2023.

Comments: 14 pages, 6 figures

Precision pulse shape simulation for proton detection at the Nab experiment

Authors: Leendert Hayen, ** Ha Choi, Dustin Combs, R. J. Taylor, Stefan Baeßler, Noah Birge, Leah J. Broussard, Christopher B. Crawford, Nadia Fomin, Michael Gericke, Francisco Gonzalez, Aaron Jezghani, Nick Macsai, Mark Makela, David G. Mathews, Russell Mammei, Mark McCrea, August Mendelsohn, Austin Nelsen, Grant Riley, Tom Shelton, Sky Sjue, Erick Smith, Albert R. Young, Bryan Zeck

Abstract: The Nab experiment at Oak Ridge National Laboratory, USA, aims to measure the beta-antineutrino angular correlation following neutron $β$ decay to an anticipated precision of approximately 0.1\%. The proton momentum is reconstructed through proton time-of-flight measurements, and potential systematic biases in the timing reconstruction due to detector effects must be controlled at the nanosecond l… ▽ More The Nab experiment at Oak Ridge National Laboratory, USA, aims to measure the beta-antineutrino angular correlation following neutron $β$ decay to an anticipated precision of approximately 0.1\%. The proton momentum is reconstructed through proton time-of-flight measurements, and potential systematic biases in the timing reconstruction due to detector effects must be controlled at the nanosecond level. We present a thorough and detailed semiconductor and quasiparticle transport simulation effort to provide precise pulse shapes, and report on relevant systematic effects and potential measurement schemes. △ Less

Submitted 6 December, 2022; originally announced December 2022.

Particle Physics at the European Spallation Source

Authors: H. Abele, A. Alekou, A. Algora, K. Andersen, S. Baessler, L. Barron-Palos, J. Barrow, E. Baussan, P. Bentley, Z. Berezhiani, Y. Bessler, A. K. Bhattacharyya, A. Bianchi, J. Bijnens, C. Blanco, N. Blaskovic Kraljevic, M. Blennow, K. Bodek, M. Bogomilov, C. Bohm, B. Bolling, E. Bouquerel, G. Brooijmans, L. J. Broussard, O. Buchan , et al. (154 additional authors not shown)

Abstract: Presently under construction in Lund, Sweden, the European Spallation Source (ESS) will be the world's brightest neutron source. As such, it has the potential for a particle physics program with a unique reach and which is complementary to that available at other facilities. This paper describes proposed particle physics activities for the ESS. These encompass the exploitation of both the neutrons… ▽ More Presently under construction in Lund, Sweden, the European Spallation Source (ESS) will be the world's brightest neutron source. As such, it has the potential for a particle physics program with a unique reach and which is complementary to that available at other facilities. This paper describes proposed particle physics activities for the ESS. These encompass the exploitation of both the neutrons and neutrinos produced at the ESS for high precision (sensitivity) measurements (searches). △ Less

Submitted 30 January, 2024; v1 submitted 18 November, 2022; originally announced November 2022.

Comments: 121 pages, updated version after referee comments

Space Weather Observations, Modeling, and Alerts in Support of Human Exploration of Mars

Authors: James L. Green, Chuanfei Dong, Michael Hesse, C. Alex Young, Vladimir Airapetian

Abstract: Space weather observations and modeling at Mars have begun but they must be significantly increased to support the future of Human Exploration on the Red Planet. A comprehensive space weather understanding of a planet without a global magnetosphere and a thin atmosphere is very different from our situation at Earth so there is substantial fundamental research remaining. It is expected that the dev… ▽ More Space weather observations and modeling at Mars have begun but they must be significantly increased to support the future of Human Exploration on the Red Planet. A comprehensive space weather understanding of a planet without a global magnetosphere and a thin atmosphere is very different from our situation at Earth so there is substantial fundamental research remaining. It is expected that the development of suitable models will lead to a comprehensive operational Mars space weather alert (MSWA) system that would provide rapid dissemination of information to Earth controllers, astronauts in transit, and those in the exploration zone (EZ) on the surface by producing alerts that are delivered rapidly and are actionable. To illustrate the importance of such a system, we use a magnetohydrodynamic code to model an extreme Carrington-type coronal mass ejection (CME) event at Mars. The results show a significant induced surface field of nearly 3000 nT on the dayside that could radically affect unprotected electrical systems that would dramatically impact human survival on Mars. Other associated problems include coronal mass ejection (CME) shock-driven acceleration of solar energetic particles producing large doses of ionizing radiation at the Martian surface. In summary, along with working more closely with international partners, the next Heliophysics Decadal Survey must include a new initiative to meet expected demands for space weather forecasting in support of humans living and working on the surface of Mars. It will require significant effort to coordinate NASA and the international community contributions. △ Less

Submitted 8 November, 2022; originally announced November 2022.

Comments: 14 pages, 3 figures, 1 table; to appear in Frontiers in Astronomy and Space Sciences

Journal ref: Front. Astron. Space Sci. 9:1023305 (2022)

Multiple Coulomb Scattering of muons in Lithium Hydride

Authors: M. Bogomilov, R. Tsenov, G. Vankova-Kirilova, Y. P. Song, J. Y. Tang, Z. H. Li, R. Bertoni, M. Bonesini, F. Chignoli, R. Mazza, V. Palladino, A. de Bari, D. Orestano, L. Tortora, Y. Kuno, H. Sakamoto, A. Sato, S. Ishimoto, M. Chung, C. K. Sung, F. Filthaut, M. Fedorov, D. Jokovic, D. Maletic, M. Savic , et al. (112 additional authors not shown)

Abstract: Multiple Coulomb Scattering (MCS) is a well known phenomenon occurring when charged particles traverse materials. Measurements of muons traversing low $Z$ materials made in the MuScat experiment showed that theoretical models and simulation codes, such as GEANT4 (v7.0), over-estimated the scattering. The Muon Ionization Cooling Experiment (MICE) measured the cooling of a muon beam traversing a liq… ▽ More Multiple Coulomb Scattering (MCS) is a well known phenomenon occurring when charged particles traverse materials. Measurements of muons traversing low $Z$ materials made in the MuScat experiment showed that theoretical models and simulation codes, such as GEANT4 (v7.0), over-estimated the scattering. The Muon Ionization Cooling Experiment (MICE) measured the cooling of a muon beam traversing a liquid hydrogen or lithium hydride (LiH) energy absorber as part of a programme to develop muon accelerator facilities, such as a Neutrino Factory or a Muon Collider. The energy loss and MCS that occur in the absorber material are competing effects that alter the performance of the cooling channel. Therefore measurements of MCS are required in order to validate the simulations used to predict the cooling performance in future accelerator facilities. We report measurements made in the MICE apparatus of MCS using a LiH absorber and muons within the momentum range 160 to 245 MeV/c. The measured RMS scattering width is about 9% smaller than that predicted by the approximate formula proposed by the Particle Data Group. Data at 172, 200 and 240 MeV/c are compared to the GEANT4 (v9.6) default scattering model. These measurements show agreement with this more recent GEANT4 (v9.6) version over the range of incident muon momenta. △ Less

Submitted 21 September, 2022; originally announced September 2022.

Comments: 20 pages, 14 figures, journal

Report number: RAL-P-2022-001

The Development of the NNBAR Experiment

Authors: F. Backman, J. Barrow, Y. Beßler, A. Bianchi, C. Bohm, G. Brooijmans, L. J. Broussard, H. Calen, J. Cederkäll, J. I. M. Damian, E. Dian, D. D. Di Julio, K. Dunne, L. Eklund, M. J. Ferreira, P. Fierlinger, U. Friman-Gayer, C. Happe, M. Holl, T. Johansson, Y. Kamyshkov, E. Klinkby, R. Kolevatov, A. Kupsc, B. Meirose , et al. (18 additional authors not shown)

Abstract: The NNBAR experiment for the European Spallation Source will search for free neutrons converting to antineutrons with a sensitivity improvement of three orders of magnitude compared to the last such search. This paper describes progress towards a conceptual design report for NNBAR. The design of a moderator, neutron reflector, beamline, shielding and annihilation detector is reported. The simulati… ▽ More The NNBAR experiment for the European Spallation Source will search for free neutrons converting to antineutrons with a sensitivity improvement of three orders of magnitude compared to the last such search. This paper describes progress towards a conceptual design report for NNBAR. The design of a moderator, neutron reflector, beamline, shielding and annihilation detector is reported. The simulations used form part of a model which will be used for optimisation of the experiment design and quantification of its sensitivity. △ Less

Submitted 19 September, 2022; originally announced September 2022.

Comments: 30 pages, 26 figures, accepted for publication in Journal of Instrumentation (JINST)

Efficient and Scalable GaInAs Thermophotovoltaic Devices

Authors: Eric J. Tervo, Ryan M. France, Daniel J. Friedman, Madhan K. Arulanandam, Richard R. King, Tarun C. Narayan, Cecilia Luciano, Dustin P. Nizamian, Benjamin A. Johnson, Alexandra R. Young, Leah Y. Kuritzky, Emmett E. Perl, Moritz Limpinsel, Brendan M. Kayes, Andrew J. Ponec, David M. Bierman, Justin A. Briggs, Myles A. Steiner

Abstract: Thermophotovoltaics are promising solid-state energy converters for a variety of applications such as grid-scale energy storage, concentrating solar-thermal power, and waste heat recovery. Here, we report the design, fabrication, and testing of large area (0.8 cm$^2$), scalable, single junction 0.74-eV GaInAs thermophotovoltaic devices reaching an efficiency of 38.8$\pm$2.0% and an electrical powe… ▽ More Thermophotovoltaics are promising solid-state energy converters for a variety of applications such as grid-scale energy storage, concentrating solar-thermal power, and waste heat recovery. Here, we report the design, fabrication, and testing of large area (0.8 cm$^2$), scalable, single junction 0.74-eV GaInAs thermophotovoltaic devices reaching an efficiency of 38.8$\pm$2.0% and an electrical power density of 3.78 W/cm$^2$ at an emitter temperature of 1850°C. Reaching such a high emitter temperature and power density without sacrificing efficiency is a direct result of combining good spectral management with a highly optimized cell architecture, excellent material quality, and very low series resistance. Importantly, fabrication of 12 high-performing devices on a two-inch wafer is shown to be repeatable, and the cell design can be readily transferred to commercial epitaxy on even larger wafers. Further improvements in efficiency can be obtained by using a multijunction architecture, and early results for a two-junction 0.84-eV GaInPAs / 0.74-eV GaInAs device illustrate this promise. △ Less

Submitted 1 July, 2022; originally announced July 2022.

Comments: 27 pages, 15 figures

Fill and dump measurement of the neutron lifetime using an asymmetric magneto-gravitational trap

Authors: C. Cude-Woods, F. M. Gonzalez, E. M. Fries, T. Bailey, M. Blatnik, N. B. Callahan, J. H. Choi, S. M. Clayton, S. A. Currie, M. Dawid, B. W. Filippone, W. Fox, P. Geltenbort, E. George, L. Hayen, K. P. Hickerson, M. A. Hoffbauer, K. Hoffman, A. T. Holley, T. M. Ito, A. Komives, C. -Y. Liu, M. Makela, C. L. Morris, R. Musedinovic , et al. (17 additional authors not shown)

Abstract: The past two decades have yielded several new measurements and reanalyses of older measurements of the neutron lifetime. These have led to a 4.4 standard deviation discrepancy between the most precise measurements of the neutron decay rate producing protons in cold neutron beams and the lifetime measured in neutron storage experiments. Measurements using different techniques are important for inve… ▽ More The past two decades have yielded several new measurements and reanalyses of older measurements of the neutron lifetime. These have led to a 4.4 standard deviation discrepancy between the most precise measurements of the neutron decay rate producing protons in cold neutron beams and the lifetime measured in neutron storage experiments. Measurements using different techniques are important for investigating whether there are unidentified systematic effects in any of the measurements. In this paper we report a new measurement using the Los Alamos asymmetric magneto-gravitational trap where the surviving neutrons are counted external to the trap using the fill and dump method. The new measurement gives a free neutron lifetime of . Although this measurement is not as precise, it is in statistical agreement with previous results using in situ counting in the same apparatus. △ Less

Submitted 4 May, 2022; originally announced May 2022.

Report number: LA-UR-22-23486

Projected Sensitivity of DMRadio-m$^3$: A Search for the QCD Axion Below $1\,μ$eV

Authors: DMRadio Collaboration, L. Brouwer, S. Chaudhuri, H. -M. Cho, J. Corbin, W. Craddock, C. S. Dawson, A. Droster, J. W. Foster, J. T. Fry, P. W. Graham, R. Henning, K. D. Irwin, F. Kadribasic, Y. Kahn, A. Keller, R. Kolevatov, S. Kuenstner, A. F. Leder, D. Li, J. L. Ouellet, K. Pappas, A. Phipps, N. M. Rapidis, B. R. Safdi , et al. (9 additional authors not shown)

Abstract: The QCD axion is one of the most compelling candidates to explain the dark matter abundance of the universe. With its extremely small mass ($\ll 1\,\mathrm{eV}/c^2$), axion dark matter interacts as a classical field rather than a particle. Its coupling to photons leads to a modification of Maxwell's equations that can be measured with extremely sensitive readout circuits. DMRadio-m$^3$ is a next-g… ▽ More The QCD axion is one of the most compelling candidates to explain the dark matter abundance of the universe. With its extremely small mass ($\ll 1\,\mathrm{eV}/c^2$), axion dark matter interacts as a classical field rather than a particle. Its coupling to photons leads to a modification of Maxwell's equations that can be measured with extremely sensitive readout circuits. DMRadio-m$^3$ is a next-generation search for axion dark matter below $1\,μ$eV using a $>4$ T static magnetic field, a coaxial inductive pickup, a tunable LC resonator, and a DC-SQUID readout. It is designed to search for QCD axion dark matter over the range $20\,\mathrm{neV}\lesssim m_ac^2\lesssim 800\,\mathrm{neV}$ ($5\,\mathrm{MHz}<ν<200\,\mathrm{MHz}$). The primary science goal aims to achieve DFSZ sensitivity above $m_ac^2\approx 120$ neV (30 MHz), with a secondary science goal of probing KSVZ axions down to $m_ac^2\approx40\,\mathrm{neV}$ (10 MHz). △ Less

Submitted 8 December, 2022; v1 submitted 28 April, 2022; originally announced April 2022.

Comments: 8 pages, 4 figures. Updated to fix small errors and correct acknowledgements. Updated title and notational clarifications

Investigating the sources of low-energy events in a SuperCDMS-HVeV detector

Authors: SuperCDMS Collaboration, M. F. Albakry, I. Alkhatib, D. W. P. Amaral, T. Aralis, T. Aramaki, I. J. Arnquist, I. Ataee Langroudy, E. Azadbakht, S. Banik, C. Bathurst, D. A. Bauer, R. Bhattacharyya, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, M. Chaudhuri, R. Chen, N. Chott, J. Cooley , et al. (104 additional authors not shown)

Abstract: Recent experiments searching for sub-GeV/$c^2$ dark matter have observed event excesses close to their respective energy thresholds. Although specific to the individual technologies, the measured excess event rates have been consistently reported at or below event energies of a few-hundred eV, or with charges of a few electron-hole pairs. In the present work, we operated a 1-gram silicon SuperCDMS… ▽ More Recent experiments searching for sub-GeV/$c^2$ dark matter have observed event excesses close to their respective energy thresholds. Although specific to the individual technologies, the measured excess event rates have been consistently reported at or below event energies of a few-hundred eV, or with charges of a few electron-hole pairs. In the present work, we operated a 1-gram silicon SuperCDMS-HVeV detector at three voltages across the crystal (0 V, 60 V and 100 V). The 0 V data show an excess of events in the tens of eV region. Despite this event excess, we demonstrate the ability to set a competitive exclusion limit on the spin-independent dark matter--nucleon elastic scattering cross section for dark matter masses of $\mathcal{O}(100)$ MeV/$c^2$, enabled by operation of the detector at 0 V potential and achievement of a very low $\mathcal{O}(10)$ eV threshold for nuclear recoils. Comparing the data acquired at 0 V, 60 V and 100 V potentials across the crystal, we investigated possible sources of the unexpected events observed at low energy. The data indicate that the dominant contribution to the excess is consistent with a hypothesized luminescence from the printed circuit boards used in the detector holder. △ Less

Submitted 11 October, 2022; v1 submitted 17 April, 2022; originally announced April 2022.

SELFIES and the future of molecular string representations

Authors: Mario Krenn, Qianxiang Ai, Senja Barthel, Nessa Carson, Angelo Frei, Nathan C. Frey, Pascal Friederich, Théophile Gaudin, Alberto Alexander Gayle, Kevin Maik Jablonka, Rafael F. Lameiro, Dominik Lemm, Alston Lo, Seyed Mohamad Moosavi, José Manuel Nápoles-Duarte, AkshatKumar Nigam, Robert Pollice, Kohulan Rajan, Ulrich Schatzschneider, Philippe Schwaller, Marta Skreta, Berend Smit, Felix Strieth-Kalthoff, Chong Sun, Gary Tom , et al. (6 additional authors not shown)

Abstract: Artificial intelligence (AI) and machine learning (ML) are expanding in popularity for broad applications to challenging tasks in chemistry and materials science. Examples include the prediction of properties, the discovery of new reaction pathways, or the design of new molecules. The machine needs to read and write fluently in a chemical language for each of these tasks. Strings are a common tool… ▽ More Artificial intelligence (AI) and machine learning (ML) are expanding in popularity for broad applications to challenging tasks in chemistry and materials science. Examples include the prediction of properties, the discovery of new reaction pathways, or the design of new molecules. The machine needs to read and write fluently in a chemical language for each of these tasks. Strings are a common tool to represent molecular graphs, and the most popular molecular string representation, SMILES, has powered cheminformatics since the late 1980s. However, in the context of AI and ML in chemistry, SMILES has several shortcomings -- most pertinently, most combinations of symbols lead to invalid results with no valid chemical interpretation. To overcome this issue, a new language for molecules was introduced in 2020 that guarantees 100\% robustness: SELFIES (SELF-referencIng Embedded Strings). SELFIES has since simplified and enabled numerous new applications in chemistry. In this manuscript, we look to the future and discuss molecular string representations, along with their respective opportunities and challenges. We propose 16 concrete Future Projects for robust molecular representations. These involve the extension toward new chemical domains, exciting questions at the interface of AI and robust languages and interpretability for both humans and machines. We hope that these proposals will inspire several follow-up works exploiting the full potential of molecular string representations for the future of AI in chemistry and materials science. △ Less

Submitted 31 March, 2022; originally announced April 2022.

Comments: 34 pages, 15 figures, comments and suggestions for additional references are welcome!

Journal ref: Cell Patterns 3(10), 100588(2022)

Axion Dark Matter

Authors: C. B. Adams, N. Aggarwal, A. Agrawal, R. Balafendiev, C. Bartram, M. Baryakhtar, H. Bekker, P. Belov, K. K. Berggren, A. Berlin, C. Boutan, D. Bowring, D. Budker, A. Caldwell, P. Carenza, G. Carosi, R. Cervantes, S. S. Chakrabarty, S. Chaudhuri, T. Y. Chen, S. Cheong, A. Chou, R. T. Co, J. Conrad, D. Croon , et al. (130 additional authors not shown)

Abstract: Axions are well-motivated dark matter candidates with simple cosmological production mechanisms. They were originally introduced to solve the strong CP problem, but also arise in a wide range of extensions to the Standard Model. This Snowmass white paper summarizes axion phenomenology and outlines next-generation laboratory experiments proposed to detect axion dark matter. There are vibrant synerg… ▽ More Axions are well-motivated dark matter candidates with simple cosmological production mechanisms. They were originally introduced to solve the strong CP problem, but also arise in a wide range of extensions to the Standard Model. This Snowmass white paper summarizes axion phenomenology and outlines next-generation laboratory experiments proposed to detect axion dark matter. There are vibrant synergies with astrophysical searches and advances in instrumentation including quantum-enabled readout, high-Q resonators and cavities and large high-field magnets. This white paper outlines a clear roadmap to discovery, and shows that the US is well-positioned to be at the forefront of the search for axion dark matter in the coming decade. △ Less

Submitted 29 March, 2023; v1 submitted 28 March, 2022; originally announced March 2022.

Comments: restore and expand author list

New Horizons: Scalar and Vector Ultralight Dark Matter

Authors: D. Antypas, A. Banerjee, C. Bartram, M. Baryakhtar, J. Betz, J. J. Bollinger, C. Boutan, D. Bowring, D. Budker, D. Carney, G. Carosi, S. Chaudhuri, S. Cheong, A. Chou, M. D. Chowdhury, R. T. Co, J. R. Crespo López-Urrutia, M. Demarteau, N. DePorzio, A. V. Derbin, T. Deshpande, M. D. Chowdhury, L. Di Luzio, A. Diaz-Morcillo, J. M. Doyle , et al. (104 additional authors not shown)

Abstract: The last decade has seen unprecedented effort in dark matter model building at all mass scales coupled with the design of numerous new detection strategies. Transformative advances in quantum technologies have led to a plethora of new high-precision quantum sensors and dark matter detection strategies for ultralight ($<10\,$eV) bosonic dark matter that can be described by an oscillating classical,… ▽ More The last decade has seen unprecedented effort in dark matter model building at all mass scales coupled with the design of numerous new detection strategies. Transformative advances in quantum technologies have led to a plethora of new high-precision quantum sensors and dark matter detection strategies for ultralight ($<10\,$eV) bosonic dark matter that can be described by an oscillating classical, largely coherent field. This white paper focuses on searches for wavelike scalar and vector dark matter candidates. △ Less

Submitted 28 March, 2022; originally announced March 2022.

Comments: Snowmass 2021 White Paper

A Strategy for Low-Mass Dark Matter Searches with Cryogenic Detectors in the SuperCDMS SNOLAB Facility

Authors: SuperCDMS Collaboration, M. F. Albakry, I. Alkhatib, D. W. P. Amaral, T. Aralis, T. Aramaki, I. J. Arnquist, I. Ataee Langroudy, E. Azadbakht, S. Banik, C. Bathurst, D. A. Bauer, R. Bhattacharyya, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeno, Y. -Y. Chang, M. Chaudhuri, R. Chen, N. Chott, J. Cooley , et al. (103 additional authors not shown)

Abstract: The SuperCDMS Collaboration is currently building SuperCDMS SNOLAB, a dark matter search focused on nucleon-coupled dark matter in the 1-5 GeV/c$^2$ mass range. Looking to the future, the Collaboration has developed a set of experience-based upgrade scenarios, as well as novel directions, to extend the search for dark matter using the SuperCDMS technology in the SNOLAB facility. The experienced-ba… ▽ More The SuperCDMS Collaboration is currently building SuperCDMS SNOLAB, a dark matter search focused on nucleon-coupled dark matter in the 1-5 GeV/c$^2$ mass range. Looking to the future, the Collaboration has developed a set of experience-based upgrade scenarios, as well as novel directions, to extend the search for dark matter using the SuperCDMS technology in the SNOLAB facility. The experienced-based scenarios are forecasted to probe many square decades of unexplored dark matter parameter space below 5 GeV/c$^2$, covering over 6 decades in mass: 1-100 eV/c$^2$ for dark photons and axion-like particles, 1-100 MeV/c$^2$ for dark-photon-coupled light dark matter, and 0.05-5 GeV/c$^2$ for nucleon-coupled dark matter. They will reach the neutrino fog in the 0.5-5 GeV/c$^2$ mass range and test a variety of benchmark models and sharp targets. The novel directions involve greater departures from current SuperCDMS technology but promise even greater reach in the long run, and their development must begin now for them to be available in a timely fashion. The experienced-based upgrade scenarios rely mainly on dramatic improvements in detector performance based on demonstrated scaling laws and reasonable extrapolations of current performance. Importantly, these improvements in detector performance obviate significant reductions in background levels beyond current expectations for the SuperCDMS SNOLAB experiment. Given that the dominant limiting backgrounds for SuperCDMS SNOLAB are cosmogenically created radioisotopes in the detectors, likely amenable only to isotopic purification and an underground detector life-cycle from before crystal growth to detector testing, the potential cost and time savings are enormous and the necessary improvements much easier to prototype. △ Less

Submitted 1 April, 2023; v1 submitted 16 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021; v2 updated (assorted corrections and improvements to forecasts) October 2022; v3 updated (corrected SuperCDMS SNOLAB sensitivity curves in upgrade forecast plots in body of text) April 2023

Ionization yield measurement in a germanium CDMSlite detector using photo-neutron sources

Authors: SuperCDMS Collaboration, M. F. Albakry, I. Alkhatib, D. W. P. Amaral, T. Aralis, T. Aramaki, I. J. Arnquist, I. Ataee Langroudy, E. Azadbakht, S. Banik, C. Bathurst, D. A. Bauer, L. V. S. Bezerra, R. Bhattacharyya, M. A. Bowles, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, M. Chaudhuri, R. Chen , et al. (104 additional authors not shown)

Abstract: Two photo-neutron sources, $^{88}$Y$^{9}$Be and $^{124}$Sb$^{9}$Be, have been used to investigate the ionization yield of nuclear recoils in the CDMSlite germanium detectors by the SuperCDMS collaboration. This work evaluates the yield for nuclear recoil energies between 1 keV and 7 keV at a temperature of $\sim$ 50 mK. We use a Geant4 simulation to model the neutron spectrum assuming a charge yie… ▽ More Two photo-neutron sources, $^{88}$Y$^{9}$Be and $^{124}$Sb$^{9}$Be, have been used to investigate the ionization yield of nuclear recoils in the CDMSlite germanium detectors by the SuperCDMS collaboration. This work evaluates the yield for nuclear recoil energies between 1 keV and 7 keV at a temperature of $\sim$ 50 mK. We use a Geant4 simulation to model the neutron spectrum assuming a charge yield model that is a generalization of the standard Lindhard model and consists of two energy dependent parameters. We perform a likelihood analysis using the simulated neutron spectrum, modeled background, and experimental data to obtain the best fit values of the yield model. The ionization yield between recoil energies of 1 keV and 7 keV is shown to be significantly lower than predicted by the standard Lindhard model for germanium. There is a general lack of agreement among different experiments using a variety of techniques studying the low-energy range of the nuclear recoil yield, which is most critical for interpretation of direct dark matter searches. This suggests complexity in the physical process that many direct detection experiments use to model their primary signal detection mechanism and highlights the need for further studies to clarify underlying systematic effects that have not been well understood up to this point. △ Less

Submitted 27 June, 2022; v1 submitted 14 February, 2022; originally announced February 2022.

Journal ref: Phys. Rev. D 105, 122002 (2022)

Tweezer-programmable 2D quantum walks in a Hubbard-regime lattice

Authors: Aaron W. Young, William J. Eckner, Nathan Schine, Andrew M. Childs, Adam M. Kaufman

Abstract: Quantum walks provide a framework for understanding and designing quantum algorithms that is both intuitive and universal. To leverage the computational power of these walks, it is important to be able to programmably modify the graph a walker traverses while maintaining coherence. Here, we do this by combining the fast, programmable control provided by optical tweezer arrays with the scalable, ho… ▽ More Quantum walks provide a framework for understanding and designing quantum algorithms that is both intuitive and universal. To leverage the computational power of these walks, it is important to be able to programmably modify the graph a walker traverses while maintaining coherence. Here, we do this by combining the fast, programmable control provided by optical tweezer arrays with the scalable, homogeneous environment of an optical lattice. Using this new combination of tools we study continuous-time quantum walks of single atoms on a 2D square lattice, and perform proof-of-principle demonstrations of spatial search using these walks. When scaled to more particles, the capabilities demonstrated here can be extended to study a variety of problems in quantum information science and quantum simulation, including the deterministic assembly of ground and excited states in Hubbard models with tunable interactions, and performing versions of spatial search in a larger graph with increased connectivity, where search by quantum walk can be more effective. △ Less

Submitted 2 February, 2022; originally announced February 2022.

Comments: 9 pages, 3 figures (main text); 13 pages, 8 figures (supplemental materials)

Long-lived Bell states in an array of optical clock qubits

Authors: Nathan Schine, Aaron W. Young, William J. Eckner, Michael J. Martin, Adam M. Kaufman

Abstract: The generation of long-lived entanglement on an optical clock transition is a key requirement to unlocking the promise of quantum metrology. Arrays of neutral atoms constitute a capable quantum platform for accessing such physics, where Rydberg-based interactions may generate entanglement between individually controlled and resolved atoms. To this end, we leverage the programmable state preparatio… ▽ More The generation of long-lived entanglement on an optical clock transition is a key requirement to unlocking the promise of quantum metrology. Arrays of neutral atoms constitute a capable quantum platform for accessing such physics, where Rydberg-based interactions may generate entanglement between individually controlled and resolved atoms. To this end, we leverage the programmable state preparation afforded by optical tweezers along with the efficient strong confinement of a 3d optical lattice to prepare an ensemble of strontium atom pairs in their motional ground state. We engineer global single-qubit gates on the optical clock transition and two-qubit entangling gates via adiabatic Rydberg dressing, enabling the generation of Bell states, $|ψ\rangle = \frac{1}{\sqrt{2}}\left(|gg\rangle + i|ee\rangle \right)$, with a fidelity of $\mathcal{F}= 92.8(2.0)$%. For use in quantum metrology, it is furthermore critical that the resulting entanglement be long lived; we find that the coherence of the Bell state has a lifetime of $τ_{bc} = 4.2(6)$ s via parity correlations and simultaneous comparisons between entangled and unentangled ensembles. Such Bell states can be useful for enhancing metrological stability and bandwidth. Further rearrangement of hundreds of atoms into arbitrary configurations using optical tweezers will enable implementation of many-qubit gates and cluster state generation, as well as explorations of the transverse field Ising model and Hubbard models with entangled or finite-range-interacting tunnellers. △ Less

Submitted 29 November, 2021; originally announced November 2021.

Journal ref: Nature Physics, 2022

Non-invasive hemodynamic analysis for aortic regurgitation using computational fluid dynamics and deep learning

Authors: Derek Long, Cameron McMurdo, Edward Ferdian, Charlene A. Mauger, David Marlevi, Alistair A. Young, Martyn P. Nash

Abstract: Changes in cardiovascular hemodynamics are closely related to the development of aortic regurgitation, a type of valvular heart disease. Metrics derived from blood flows are used to indicate aortic regurgitation onset and evaluate its severity. These metrics can be non-invasively obtained using four-dimensional (4D) flow magnetic resonance imaging (MRI), where accuracy is primarily dependent on sp… ▽ More Changes in cardiovascular hemodynamics are closely related to the development of aortic regurgitation, a type of valvular heart disease. Metrics derived from blood flows are used to indicate aortic regurgitation onset and evaluate its severity. These metrics can be non-invasively obtained using four-dimensional (4D) flow magnetic resonance imaging (MRI), where accuracy is primarily dependent on spatial resolution. However, insufficient resolution often results from limitations in 4D flow MRI and complex aortic regurgitation hemodynamics. To address this, computational fluid dynamics simulations were transformed into synthetic 4D flow MRI data and used to train a variety of neural networks. These networks generated super resolution, full-field phase images with an upsample factor of 4. Results showed decreased velocity error, high structural similarity scores, and improved learning capabilities from previous work. Further validation was performed on two sets of in-vivo 4D flow MRI data and demonstrated success in de-noising flow images. This approach presents an opportunity to comprehensively analyse aortic regurgitation hemodynamics in a non-invasive manner. △ Less

Submitted 5 April, 2022; v1 submitted 23 November, 2021; originally announced November 2021.

Greenberg's force prediction for vertical-axis wind turbine blades

Authors: David Bensason, Sébastien Le Fouest, Anna Young, Karen Mulleners

Abstract: We present a method to adapt Greenberg's potential flow model for coupled pitching and surging flow such that it can be applied to predict the loads on a vertical-axis wind turbine blade. The model is extended to compute loads on a blade undergoing multi-harmonic oscillations in effective angle of attack and incoming flow velocity by formulating the blade kinematics as a sum of simple harmonic mot… ▽ More We present a method to adapt Greenberg's potential flow model for coupled pitching and surging flow such that it can be applied to predict the loads on a vertical-axis wind turbine blade. The model is extended to compute loads on a blade undergoing multi-harmonic oscillations in effective angle of attack and incoming flow velocity by formulating the blade kinematics as a sum of simple harmonic motions. Each of these functions is a multiple of the main turbine rotational frequency, associated with an individual amplitude, as suggested by Greenberg. The results of the adapted model are compared with experimental data from a scaled-down model of a single-bladed H-type Darrieus wind turbine. The comparison between the predictions by the Greenberg model and experimentally obtained phase-averaged radial force evolutions show that the inviscid Greenberg model predicts well the loads at the start of the upwind portion and the maximum loads during upwind, but fails during the downwind portion when flow separation occurs. The proposed application of Greenberg's model to vertical-axis wind turbine kinematics shows a great potential to diagnose regions of separated flow and for quantifying the relative influences of dynamic stall and intrinsic turbine kinematics on the blade loading. Future research can readily extend this method to any airfoil undergoing an arbitrary combination of pitching, surging, and heaving, following a kinematic profile that can be approximated by a Fourier series. △ Less

Submitted 22 January, 2022; v1 submitted 1 November, 2021; originally announced November 2021.

Deep Learning Analysis of Cardiac MRI in Legacy Datasets: Multi-Ethnic Study of Atherosclerosis

Authors: Avan Suinesiaputra, Charlene A Mauger, Bharath Ambale-Venkatesh, David A Bluemke, Josefine Dam Gade, Kathleen Gilbert, Mark Janse, Line Sofie Hald, Conrad Werkhoven, Colin Wu, Joao A Lima, Alistair A Young

Abstract: The shape and motion of the heart provide essential clues to understanding the mechanisms of cardiovascular disease. With the advent of large-scale cardiac imaging data, statistical atlases become a powerful tool to provide automated and precise quantification of the status of patient-specific heart geometry with respect to reference populations. The Multi-Ethnic Study of Atherosclerosis (MESA), b… ▽ More The shape and motion of the heart provide essential clues to understanding the mechanisms of cardiovascular disease. With the advent of large-scale cardiac imaging data, statistical atlases become a powerful tool to provide automated and precise quantification of the status of patient-specific heart geometry with respect to reference populations. The Multi-Ethnic Study of Atherosclerosis (MESA), begun in 2000, was the first large cohort study to incorporate cardiovascular MRI in over 5000 participants, and there is now a wealth of follow-up data over 20 years. Building a machine learning based automated analysis is necessary to extract the additional imaging information necessary for expanding original manual analyses. However, machine learning tools trained on MRI datasets with different pulse sequences fail on such legacy datasets. Here, we describe an automated atlas construction pipeline using deep learning methods applied to the legacy cardiac MRI data in MESA. For detection of anatomical cardiac landmark points, a modified VGGNet convolutional neural network architecture was used in conjunction with a transfer learning sequence between two-chamber, four-chamber, and short-axis MRI views. A U-Net architecture was used for detection of the endocardial and epicardial boundaries in short axis images. Both network architectures resulted in good segmentation and landmark detection accuracies compared with inter-observer variations. Statistical relationships with common risk factors were similar between atlases derived from automated vs manual annotations. The automated atlas can be employed in future studies to examine the relationships between cardiac morphology and future events. △ Less

Submitted 28 October, 2021; originally announced October 2021.

Physics-Based Models for Magneto-Electric Spin-Orbit Logic Circuits

Authors: Hai Li, Dmitri E. Nikonov, Chia-Ching Lin, Kerem Camsari, Yu-Ching Liao, Chia-Sheng Hsu, Azad Naeemi, Ian A. Young

Abstract: Spintronic devices are a promising beyond-CMOS device option thanks to their energy efficiency and compatibility with CMOS. To accurately capture their multi-physics dynamics, a rigorous treatment of both spin and charge and their inter-conversion is required. Here we present physics-based device models based on 4x4 matrices for the spin-orbit coupling part of the magneto-electric spin-orbit (MESO… ▽ More Spintronic devices are a promising beyond-CMOS device option thanks to their energy efficiency and compatibility with CMOS. To accurately capture their multi-physics dynamics, a rigorous treatment of both spin and charge and their inter-conversion is required. Here we present physics-based device models based on 4x4 matrices for the spin-orbit coupling part of the magneto-electric spin-orbit (MESO) device. Also, a more rigorous physics model of ferroelectric and magnetoelectric switching of ferromagnets, based on Landau-Lifshitz-Gilbert (LLG) and Landau-Khalatnikov (LK) equations, is presented. With the combined model implemented in a SPICE circuit simulator environment, simulation results were obtained which show feasibility of MESO implementation and functional operation of buffers, oscillators, and majority gates. △ Less

Submitted 21 October, 2021; originally announced October 2021.

Comments: 11 pages, 21 figures

Journal ref: IEEE Journal on Exploratory Solid-State Computational Devices and Circuits (2022)

Perfect Chirality with imperfect polarisation

Authors: Ben Lang, Dara P. S. McCutcheon, Edmund Harbord, Andrew B. Young, Ruth Oulton

Abstract: Unidirectional (chiral) emission of light from a circular dipole emitter into a waveguide is only possible at points of perfect circular polarisation (C points), with elliptical polarisations yielding a lower directional contrast. However, there is no need to restrict engineered systems to circular dipoles and with an appropriate choice of dipole unidirectional emission is possible for any ellipti… ▽ More Unidirectional (chiral) emission of light from a circular dipole emitter into a waveguide is only possible at points of perfect circular polarisation (C points), with elliptical polarisations yielding a lower directional contrast. However, there is no need to restrict engineered systems to circular dipoles and with an appropriate choice of dipole unidirectional emission is possible for any elliptical polarization. Using elliptical dipoles, rather than circular, typically increases the size of the area suitable for chiral interactions (in an exemplary mode by a factor $\sim 30$), while simultaneously increasing coupling efficiencies. We propose illustrative schemes to engineer the necessary elliptical transitions in both atomic systems and quantum dots. △ Less

Submitted 16 February, 2022; v1 submitted 24 September, 2021; originally announced September 2021.

Comments: 6 pages, 4 figures, plus supplementary

Journal ref: Phys. Rev. Lett. 128, 073602 (2022)

Performance of the MICE diagnostic system

Authors: The MICE collaboration, M. Bogomilov, R. Tsenov, G. Vankova-Kirilova, Y. P. Song, J. Y. Tang, Z. H. Li, R. Bertoni, M. Bonesini, F. Chignoli, R. Mazza, V. Palladino, A. de Bari, D. Orestano, L. Tortora, Y. Kuno, H. Sakamoto, A. Sato, S. Ishimoto, M. Chung, C. K. Sung, F. Filthaut, M. Fedorov, D. Jokovic, D. Maletic , et al. (113 additional authors not shown)

Abstract: Muon beams of low emittance provide the basis for the intense, well-characterised neutrino beams of a neutrino factory and for multi-TeV lepton-antilepton collisions at a muon collider. The international Muon Ionization Cooling Experiment (MICE) has demonstrated the principle of ionization cooling, the technique by which it is proposed to reduce the phase-space volume occupied by the muon beam at… ▽ More Muon beams of low emittance provide the basis for the intense, well-characterised neutrino beams of a neutrino factory and for multi-TeV lepton-antilepton collisions at a muon collider. The international Muon Ionization Cooling Experiment (MICE) has demonstrated the principle of ionization cooling, the technique by which it is proposed to reduce the phase-space volume occupied by the muon beam at such facilities. This paper documents the performance of the detectors used in MICE to measure the muon-beam parameters, and the physical properties of the liquid hydrogen energy absorber during running. △ Less

Submitted 16 August, 2021; v1 submitted 10 June, 2021; originally announced June 2021.

Comments: 27 pages, 18 figures

Report number: RAL-P-2021-001

Journal ref: 2021 JINST 16 P08046

High-Power, Fiber-Laser-Based Source for Magic-Wavelength Trap** in Neutral-Atom Optical Clocks

Authors: William J. Eckner, Aaron W. Young, Nathan Schine, Adam M. Kaufman

Abstract: We present a continuous-wave, 810 nm laser with watt-level powers. Our system is based on difference-frequency generation of 532 nm and 1550 nm fiber lasers in a single pass through periodically poled lithium niobate (PPLN). We measure the broadband spectral noise and residual intensity noise to be compatible with off-resonant dipole trap** of ultracold atoms. Given the large bandwidth of the fi… ▽ More We present a continuous-wave, 810 nm laser with watt-level powers. Our system is based on difference-frequency generation of 532 nm and 1550 nm fiber lasers in a single pass through periodically poled lithium niobate (PPLN). We measure the broadband spectral noise and residual intensity noise to be compatible with off-resonant dipole trap** of ultracold atoms. Given the large bandwidth of the fiber amplifiers, the output can be optimized for a range of wavelengths, including the strontium clock-magic wavelength of 813 nm. Furthermore, with the exploration of more appropriate nonlinear crystals, we believe there is a path toward scaling this proof-of-principle design to many watts of power, and that this approach could provide a robust, rack-mountable trap**-laser for future use in strontium-based optical clocks. △ Less

Submitted 22 May, 2021; originally announced May 2021.

Comments: 6 pages, 7 figures

Morphological Comparison of Blocks in Chaos Terrains on Pluto, Europa, and Mars

Authors: Helle L. Skjetne, Kelsi N. Singer, Brian M. Hynek, Katie I. Knight, Paul M. Schenk, Cathy B. Olkin, Oliver L. White, Tanguy Bertrand, Kirby D. Runyon, William B. McKinnon, Jeffrey M. Moore, S. Alan Stern, Harold A. Weaver, Leslie A. Young, Kim Ennico

Abstract: Chaos terrains are characterized by disruption of preexisting surfaces into irregularly arranged mountain blocks with a chaotic appearance. Several models for chaos formation have been proposed, but the formation and evolution of this enigmatic terrain type has not yet been fully constrained. We provide extensive map** of the individual blocks that make up different chaos landscapes, and present… ▽ More Chaos terrains are characterized by disruption of preexisting surfaces into irregularly arranged mountain blocks with a chaotic appearance. Several models for chaos formation have been proposed, but the formation and evolution of this enigmatic terrain type has not yet been fully constrained. We provide extensive map** of the individual blocks that make up different chaos landscapes, and present a morphological comparison of chaotic terrains found on Pluto, Jupiter's moon Europa, and Mars, using measurements of diameter, height, and axial ratio of chaotic mountain blocks. Additionally, we compare mountain blocks in chaotic terrain and fretted terrain on Mars. We find a positive linear relationship between the size and height of chaos blocks on Pluto and Mars, whereas blocks on Europa exhibit a flat trend as block height does not generally increase with increasing block size. Block heights on Pluto are used to estimate the block root depths if they were floating icebergs. Block heights on Europa are used to infer the total thickness of the icy layer from which the blocks formed. Finally, block heights on Mars are compared to potential layer thicknesses of near-surface material. We propose that the heights of chaotic mountain blocks on Pluto, Europa, and Mars can be used to infer information about crustal lithology and surface layer thickness. △ Less

Submitted 24 April, 2021; originally announced April 2021.

Comments: 45 pages, 3 tables, 9 figures, 5 appendices

Journal ref: Icarus (New York, N.Y. 1962), pp. 113866 (2020)

Global Climate Model Occultation Lightcurves Tested by August 2018 Ground-Based Stellar Occultation

Authors: Sihe Chen, Eliot F. Young, Leslie A. Young, Tanguy Bertrand, François Forget, Yuk L. Yung

Abstract: Pluto's atmospheric profiles (temperature and pressure) have been studied for decades from stellar occultation lightcurves. In this paper, we look at recent Pluto Global Climate Model (GCM) results (3D temperature, pressure, and density fields) from Bertrand et al. (2020) and use the results to generate model observer's plane intensity fields (OPIF) and lightcurves by using a Fourier optics scheme… ▽ More Pluto's atmospheric profiles (temperature and pressure) have been studied for decades from stellar occultation lightcurves. In this paper, we look at recent Pluto Global Climate Model (GCM) results (3D temperature, pressure, and density fields) from Bertrand et al. (2020) and use the results to generate model observer's plane intensity fields (OPIF) and lightcurves by using a Fourier optics scheme to model light passing through Pluto's atmosphere (Young, 2012). This approach can accommodate arbitrary atmospheric structures and 3D distributions of haze. We compared the GCM model lightcurves with the lightcurves observed during the 15-AUG-2018 Pluto stellar occultation. We find that the climate scenario which best reproduces the observed data includes an N2 ice mid-latitude band in the southern hemisphere. We have also studied different haze and P/T ratio profiles: the haze effectively reduces the central flash strength, and a lower P/T ratio both reduces the central flash strength and incurs anomalies in the shoulders of the central flash. △ Less

Submitted 9 February, 2021; originally announced February 2021.

Journal ref: Volume 356, Icarus (2021)

Ordering Behavior of the Two-Dimensional Ising Spin Glass with Long-Range Correlated Disorder

Authors: L. Münster, C. Norrenbrock, A. P. Young, A. K. Hartmann

Abstract: The standard two-dimensional Ising spin glass does not exhibit an ordered phase at finite temperature. Here, we investigate whether long-range correlated bonds change this behavior. The bonds are drawn from a Gaussian distribution with a two-point correlation for bonds at distance r that decays as $(1+r^2)^{-a/2}$, $a>0$. We study numerically with exact algorithms the ground state and domain wall… ▽ More The standard two-dimensional Ising spin glass does not exhibit an ordered phase at finite temperature. Here, we investigate whether long-range correlated bonds change this behavior. The bonds are drawn from a Gaussian distribution with a two-point correlation for bonds at distance r that decays as $(1+r^2)^{-a/2}$, $a>0$. We study numerically with exact algorithms the ground state and domain wall excitations. Our results indicate that the inclusion of bond correlations does not lead to a spin-glass order at any finite temperature. A further analysis reveals that bond correlations have a strong effect at local length scales, inducing ferro/antiferromagnetic domains into the system. The length scale of ferro/antiferromagnetic order diverges exponentially as the correlation exponent approaches a critical value, $a \to a_c = 0$. Thus, our results suggest that the system becomes a ferro/antiferromagnet only in the limit $a \to 0$. △ Less

Submitted 1 February, 2021; originally announced February 2021.

Comments: 10 pages, 10 figures

Journal ref: Phys. Rev. E 103, 042117 (2021)

Energetic Proton Propagation and Acceleration Simulated for the Bastille Day Event of July 14, 2000

Authors: Matthew A. Young, Nathan A. Schwadron, Matthew Gorby, Jon Linker, Ronald M. Caplan, Cooper Downs, Tibor Török, Pete Riley, Roberto Lionello, Viacheslav Titov, Richard A. Mewaldt, Christina M. S. Cohen

Abstract: This work presents results from simulations of the 14 July 2000 ("Bastille Day") solar proton event. We used the Energetic Particle Radiation Environment Model (EPREM) and the CORona-HELiosphere (CORHEL) software suite within the SPE Threat Assessment Tool (STAT) framework to model proton acceleration to GeV energies due to the passage of a CME through the low solar corona, and compared the model… ▽ More This work presents results from simulations of the 14 July 2000 ("Bastille Day") solar proton event. We used the Energetic Particle Radiation Environment Model (EPREM) and the CORona-HELiosphere (CORHEL) software suite within the SPE Threat Assessment Tool (STAT) framework to model proton acceleration to GeV energies due to the passage of a CME through the low solar corona, and compared the model results to GOES-08 observations. The coupled simulation models particle acceleration from 1 to 20 $R_\odot$, after which it models only particle transport. The simulation roughly reproduces the peak event fluxes, and timing and spatial location of the energetic particle event. While peak fluxes and overall variation within the first few hours of the simulation agree well with observations, the modeled CME moves beyond the inner simulation boundary after several hours. The model therefore accurately describes the acceleration processes in the low corona and resolves the sites of most rapid acceleration close to the Sun. Plots of integral flux envelopes from multiple simulated observers near Earth further improve the comparison to observations and increase potential for predicting solar particle events. Broken-power-law fits to fluence spectra agree with diffusive acceleration theory over the low energy range. Over the high energy range, they demonstrate the variability in acceleration rate and mirror the inter-event variability observed solar-cycle 23 GLEs. We discuss ways to improve STAT predictions, including using corrected GOES energy bins and computing fits to the seed spectrum. This paper demonstrates a predictive tool for simulating low-coronal SEP acceleration. △ Less

Submitted 25 January, 2021; v1 submitted 16 December, 2020; originally announced December 2020.

Comments: 18 pages; 9 figures

Physical Mechanism behind the Hysteresis-free Negative Capacitance Effect in Metal-Ferroelectric-Insulator-Metal Capacitors with Dielectric Leakage and Interfacial Trapped Charges

Authors: Chia-Sheng Hsu, Sou-Chi Chang, Dmitri E. Nikonov, Ian A. Young, Azad Naeemi

Abstract: The negative capacitance (NC) stabilization of a ferroelectric (FE) material can potentially provide an alternative way to further reduce the power consumption in ultra-scaled devices and thus has been of great interest in technology and science in the past decade. In this article, we present a physical picture for a better understanding of the hysteresis-free charge boost effect observed experime… ▽ More The negative capacitance (NC) stabilization of a ferroelectric (FE) material can potentially provide an alternative way to further reduce the power consumption in ultra-scaled devices and thus has been of great interest in technology and science in the past decade. In this article, we present a physical picture for a better understanding of the hysteresis-free charge boost effect observed experimentally in metal-ferroelectric-insulator-metal (MFIM) capacitors. By introducing the dielectric (DE) leakage and interfacial trapped charges, our simulations of the hysteresis loops are in a strong agreement with the experimental measurements, suggesting the existence of an interfacial oxide layer at the FE-metal interface in metal-ferroelectric-metal (MFM) capacitors. Based on the pulse switching measurements, we find that the charge enhancement and hysteresis are dominated by the FE domain viscosity and DE leakage, respectively. Our simulation results show that the underlying mechanisms for the observed hysteresis-free charge enhancement in MFIM may be physically different from the alleged NC stabilization and capacitance matching. Moreover, the link between Merz's law and the phenomenological kinetic coefficient is discussed, and the possible cause of the residual charges observed after pulse switching is explained by the trapped charge dynamics at the FE-DE interface. The physical interpretation presented in this work can provide important insights into the NC effect in MFIM capacitors and future studies of low-power logic devices. △ Less

Submitted 4 December, 2020; originally announced December 2020.

Comments: 9 pages, 7 captioned figures, 1 table

Journal ref: Phys. Rev. Applied 15, 034048 (2021)

Constraints on Lightly Ionizing Particles from CDMSlite

Authors: SuperCDMS Collaboration, I. Alkhatib, D. W. P. Amaral, T. Aralis, T. Aramaki, I. J. Arnquist, I. Ataee Langroudy, E. Azadbakht, S. Banik, D. Barker, C. Bathurst, D. A. Bauer, L. V. S. Bezerra, R. Bhattacharyya, M. A. Bowles, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, M. Chaudhuri, R. Chen , et al. (93 additional authors not shown)

Abstract: The Cryogenic Dark Matter Search low ionization threshold experiment (CDMSlite) achieved efficient detection of very small recoil energies in its germanium target, resulting in sensitivity to Lightly Ionizing Particles (LIPs) in a previously unexplored region of charge, mass, and velocity parameter space. We report first direct-detection limits calculated using the optimum interval method on the v… ▽ More The Cryogenic Dark Matter Search low ionization threshold experiment (CDMSlite) achieved efficient detection of very small recoil energies in its germanium target, resulting in sensitivity to Lightly Ionizing Particles (LIPs) in a previously unexplored region of charge, mass, and velocity parameter space. We report first direct-detection limits calculated using the optimum interval method on the vertical intensity of cosmogenically-produced LIPs with an electric charge smaller than $e/(3\times10^5$), as well as the strongest limits for charge $\leq e/160$, with a minimum vertical intensity of $1.36\times10^{-7}$\,cm$^{-2}$s$^{-1}$sr$^{-1}$ at charge $e/160$. These results apply over a wide range of LIP masses (5\,MeV/$c^2$ to 100\,TeV/$c^2$) and cover a wide range of $βγ$ values (0.1 -- $10^6$), thus excluding non-relativistic LIPs with $βγ$ as small as 0.1 for the first time. △ Less

Submitted 19 February, 2022; v1 submitted 18 November, 2020; originally announced November 2020.

Journal ref: Phys. Rev. Lett. 127, 081802 (2021)

Photoelectric absorption cross section of silicon near the band gap from room temperature to sub-Kelvin temperature

Authors: C. Stanford, M. J. Wilson, B. Cabrera, M. Diamond, N. A. Kurinsky, R. A. Moffatt, F. Ponce, B. von Krosigk, B. A. Young

Abstract: The use of cryogenic silicon as a detector medium for dark matter searches is gaining popularity. Many of these searches are highly dependent on the value of the photoelectric absorption cross section of silicon at low temperatures, particularly near the silicon band gap energy, where the searches are most sensitive to low mass dark matter candidates. While such cross section data has been lacking… ▽ More The use of cryogenic silicon as a detector medium for dark matter searches is gaining popularity. Many of these searches are highly dependent on the value of the photoelectric absorption cross section of silicon at low temperatures, particularly near the silicon band gap energy, where the searches are most sensitive to low mass dark matter candidates. While such cross section data has been lacking from the literature, previous dark matter search experiments have attempted to estimate this parameter by extrapolating it from higher temperature data. However, discrepancies in the high temperature data have led to order-of-magnitude differences in the extrapolations. In this paper, we resolve these discrepancies by using a novel technique to make a direct, low temperature measurement of the photoelectric absorption cross section of silicon at energies near the band gap. △ Less

Submitted 29 October, 2020; originally announced October 2020.

Ultracold Neutron Properties of the Eljen-299-02D deuterated scintillator

Authors: Z. Tang, E. B. Watkins, S. M. Clayton, S. A. Currie, D. E. Fellers, Md. T. Hassan, D. E. Hooks, T. M. Ito, S. K. Lawrence, S. W. T. MacDonald, M. Makela, C. L. Morris, L. P. Neukirch, A. Saunders, C. M. O'Shaughnessy, C. Cude-Woods, J. H. Choi, A. R. Young, B. A. Zeck, F. Gonzalez, C. Y. Liu, N. C. Floyd, K. P. Hickerson, A. T. Holley, B. A. Johnson , et al. (2 additional authors not shown)

Abstract: In this paper we report studies of the Fermi potential and loss per bounce of ultracold neutron (UCN) on a deuterated scintillator (Eljen-299-02D). These UCN properties of the scintillator enables a wide variety of applications in fundamental neutron research. In this paper we report studies of the Fermi potential and loss per bounce of ultracold neutron (UCN) on a deuterated scintillator (Eljen-299-02D). These UCN properties of the scintillator enables a wide variety of applications in fundamental neutron research. △ Less

Submitted 25 September, 2020; originally announced September 2020.

Comments: 6 pages, 6 figures

Modeling Pluto's Minimum Pressure: Implications for Haze Production

Authors: Perianne E. Johnson, Leslie A. Young, Silvia Protopapa, Bernard Schmitt, Leila R. Gabasova, Briley L. Lewis, John A. Stansberry, Kathy E. Mandt, Oliver L. White

Abstract: Pluto has a heterogeneous surface, despite a global haze deposition rate of ~1 micrometer per orbit (Cheng et al., 2017; Grundy et al., 2018). While there could be spatial variation in the deposition rate, this has not yet been rigorously quantified, and naively the haze should coat the surface more uniformly than was observed. One way (among many) to explain this contradiction is for atmospheric… ▽ More Pluto has a heterogeneous surface, despite a global haze deposition rate of ~1 micrometer per orbit (Cheng et al., 2017; Grundy et al., 2018). While there could be spatial variation in the deposition rate, this has not yet been rigorously quantified, and naively the haze should coat the surface more uniformly than was observed. One way (among many) to explain this contradiction is for atmospheric pressure at the surface to drop low enough to interrupt haze production and stop the deposition of particles onto part of the surface, driving heterogeneity. If the surface pressure drops to less than 10^-3 - 10^-4 microbar and the CH4 mixing ratio remains nearly constant at the observed 2015 value, the atmosphere becomes transparent to ultraviolet radiation (Young et al., 2018), which would shut off haze production at its source. If the surface pressure falls below 0.06 microbar, the atmosphere ceases to be global, and instead is localized over only the warmest part of the surface, restricting the location of deposition (Spencer et al., 1997). In Pluto's current atmosphere, haze monomers collect together into aggregate particles at beginning at 0.5 microbar; if the surface pressure falls below this limit, the appearance of particles deposited at different times of year and in different locations could be different. We use VT3D, an energy balance model (Young, 2017), to model the surface pressure on Pluto in current and past orbital configurations for four possible static N2 ice distributions: the observed northern hemisphere distribution with (1) a bare southern hemisphere, (2) a south polar cap, (3) a southern zonal band, and finally (4) a distribution that is bare everywhere except inside the boundary of Sputnik Planitia. We also present a sensitivity study showing the effect of mobile N2 ice...(cont.) △ Less

Submitted 24 August, 2020; originally announced August 2020.

Comments: accepted for publication in Icarus

Light Dark Matter Search with a High-Resolution Athermal Phonon Detector Operated Above Ground

Authors: I. Alkhatib, D. W. P. Amaral, T. Aralis, T. Aramaki, I. J. Arnquist, I. Ataee Langroudy, E. Azadbakht, S. Banik, D. Barker, C. Bathurst, D. A. Bauer, L. V. S. Bezerra, R. Bhattacharyya, T. Binder, M. A. Bowles, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, M. Chaudhuri, R. Chen , et al. (99 additional authors not shown)

Abstract: We present limits on spin-independent dark matter-nucleon interactions using a $10.6$ $\mathrm{g}$ Si athermal phonon detector with a baseline energy resolution of $σ_E=3.86 \pm 0.04$ $(\mathrm{stat.})^{+0.19}_{-0.00}$ $(\mathrm{syst.})$ $\mathrm{eV}$. This exclusion analysis sets the most stringent dark matter-nucleon scattering cross-section limits achieved by a cryogenic detector for dark matte… ▽ More We present limits on spin-independent dark matter-nucleon interactions using a $10.6$ $\mathrm{g}$ Si athermal phonon detector with a baseline energy resolution of $σ_E=3.86 \pm 0.04$ $(\mathrm{stat.})^{+0.19}_{-0.00}$ $(\mathrm{syst.})$ $\mathrm{eV}$. This exclusion analysis sets the most stringent dark matter-nucleon scattering cross-section limits achieved by a cryogenic detector for dark matter particle masses from $93$ to $140$ $\mathrm{MeV}/c^2$, with a raw exposure of $9.9$ $\mathrm{g}\cdot\mathrm{d}$ acquired at an above-ground facility. This work illustrates the scientific potential of detectors with athermal phonon sensors with eV-scale energy resolution for future dark matter searches. △ Less

Submitted 12 October, 2021; v1 submitted 21 July, 2020; originally announced July 2020.

Comments: 7 pages, 4 figures, this version includes ancillary files from official data release

Journal ref: Phys. Rev. Lett. 127, 061801 (2021)