Showing 1–50 of 66 results for author: You, Z

Nonreciprocal interactions drive capillary waves in active liquid crystals

Authors: Paarth Gulati, Fernando Caballero, Itamar Kolvin, Zhihong You, M. Cristina Marchetti

Abstract: Active liquid crystals exert nonequilibrium stresses on their surroundings through constant consumption of energy, giving rise to dynamical steady states not present in equilibrium. The paradigmatic example of an active liquid crystal is a suspension of microtubule bundles powered by kinesin motor proteins, which exhibits self-sustained spatiotemporal chaotic flows. This system has been modelled u… ▽ More Active liquid crystals exert nonequilibrium stresses on their surroundings through constant consumption of energy, giving rise to dynamical steady states not present in equilibrium. The paradigmatic example of an active liquid crystal is a suspension of microtubule bundles powered by kinesin motor proteins, which exhibits self-sustained spatiotemporal chaotic flows. This system has been modelled using continuum theories that couple the microtubule orientation to active flows. Recently the focus has shifted to the interfacial properties of mixtures of active liquid crystals and passive fluids. Active/passive interfaces have been shown to support propagating capillary waves in the absence of inertia and offer a promising route for relating experimental parameters to those of the continuum theory. In this paper we report the derivation of a minimal model that captures the linear dynamics of the interface between an active liquid crystal and a passive fluid. We show that the dynamics of the interface, although powered by active flows throughout the bulk, is qualitatively captured by equations that couple non-reciprocally interface height and nematic director at the interface. This minimal model reproduces the dynamical structure factor evaluated from numerical simulations and the qualitative form of the wave dispersion relation seen in experiments. △ Less

Submitted 4 July, 2024; originally announced July 2024.

Comments: 14 pages, 7 figures

Manipulating liquid-liquid phase separation using patterned flow

Authors: Yulin Li, Tong Zhou, Yanyu Li, Qi Zhang, Zhihong You

Abstract: The precise control of liquid-liquid phase separation (LLPS) is the key to develo** cutting-edge technologies that benefit diverse disciplines. Fluid flow was found to be capable of controlling the structure and effective temperature of LLPS, but the extent and precision of control were less than optimal. In this article, we propose that patterned flow can be employed as a generic tool to manipu… ▽ More The precise control of liquid-liquid phase separation (LLPS) is the key to develo** cutting-edge technologies that benefit diverse disciplines. Fluid flow was found to be capable of controlling the structure and effective temperature of LLPS, but the extent and precision of control were less than optimal. In this article, we propose that patterned flow can be employed as a generic tool to manipulate LLPS effectively. By combining theoretical modeling and numerical simulations, we demonstrate that flows with tailor-made structures can become functional, allowing us to control diverse aspects of LLPS. Typical examples include the capture and pinning of droplets, fine-tuning of droplet sizes, forced assembly of periodic droplet arrays, and the remodeling of the kinetics and structure of phase separation. These manipulations are grounded on the redistribution of chemical potential by the structured flow. Our results not only can lead to potential LLPS-based technologies, but also highlight the rich behavior of LLPS introduced by the patterned flow. △ Less

Submitted 2 July, 2024; originally announced July 2024.

Comments: 6 pages and 3 figures

A ROOT based detector geometry and event visualization system for JUNO-TAO

Authors: Minghua Liao, Kaixuan Huang, Yumei Zhang, Jiayang Xu, Guofu Cao, Zhengyun You

Abstract: The Taishan Antineutrino Observatory (TAO or JUNO-TAO) is a satellite experiment of Jiangmen Underground Neutrino Observatory (JUNO) and located near the Taishan nuclear power plant (NPP). TAO will measure the energy spectrum of reactor antineutrinos with unprecedented precision, which will benefit both reactor neutrino physics and the nuclear database. A detector geometry and event visualization… ▽ More The Taishan Antineutrino Observatory (TAO or JUNO-TAO) is a satellite experiment of Jiangmen Underground Neutrino Observatory (JUNO) and located near the Taishan nuclear power plant (NPP). TAO will measure the energy spectrum of reactor antineutrinos with unprecedented precision, which will benefit both reactor neutrino physics and the nuclear database. A detector geometry and event visualization system has been developed for TAO. The software is based on ROOT packages and embedded in the TAO offline software framework. It provides an intuitive tool to visualize the detector geometry, tune the reconstruction algorithm, understand the neutrino physics, and monitor the operation of reactors at NPP. The further applications of the visualization system in the experimental operation of TAO and its future development are also discussed. △ Less

Submitted 24 June, 2024; originally announced June 2024.

Orbit symmetry breaking in MXene implements enhanced soft bioelectronic implants

Authors: Yizhang Wu, Yuan Li, Yihan Liu, Dashuai Zhu, Sicheng Xing, Noah Lambert, Hannah Weisbecker, Siyuan Liu, Brayden Davis, Lin Zhang, Meixiang Wang, Gongkai Yuan, Chris Zhoufan You, Anran Zhang, Cate Duncan, Wanrong Xie, Yihang Wang, Yong Wang, Sreya Kanamurlapudi, Garcia-Guzman Evert, Arjun Putcha, Michael D. Dickey, Ke Huang, Wubin Bai

Abstract: Bioelectronic implants with soft mechanics, biocompatibility, and excellent electrical performance enable biomedical implants to record electrophysiological signals and execute interventions within internal organs, promising to revolutionize the diagnosing, monitoring, and treatment of various pathological conditions. However, challenges remain in improving excessive impedance at the bioelectronic… ▽ More Bioelectronic implants with soft mechanics, biocompatibility, and excellent electrical performance enable biomedical implants to record electrophysiological signals and execute interventions within internal organs, promising to revolutionize the diagnosing, monitoring, and treatment of various pathological conditions. However, challenges remain in improving excessive impedance at the bioelectronic-tissue interface and thus the efficacy of electrophysiological signaling and intervention. Here, we devise orbit symmetry breaking in MXene (a low-cost scalability, biocompatible, and conductive 2D layered material, that we refer to as OBXene), that exhibits low bioelectronic-tissue impedance, originating from the out-of-plane charge transfer. Furthermore, the Schottky-induced piezoelectricity stemming from the asymmetric orbital configuration of OBXene facilitates interlayered charge transport in the device. In this study, we report an OBXene-based cardiac patch applied on the left ventricular epicardium of both rodent and porcine models to enable spatiotemporal epicardium map** and pacing, while coupling the wireless and battery-free operation for long-term real-time recording and closed-loop stimulation. △ Less

Submitted 19 June, 2024; originally announced June 2024.

Method for detector description conversion from DD4hep to Filmbox

Authors: Zhaoyang Yuan, Tianzi Song, Yujie Zeng, Kaixuan Huang, Yumei Zhang, Zhengyun You

Abstract: DD4hep serves as a generic detector description toolkit recommended for offline software development in next-generation high-energy physics~(HEP) experiments. Conversely, Filmbox~(FBX) stands out as a widely used 3D modeling file format within the 3D software industry. In this paper, we introduce a novel method that can automatically convert complex HEP detector geometries from DD4hep description… ▽ More DD4hep serves as a generic detector description toolkit recommended for offline software development in next-generation high-energy physics~(HEP) experiments. Conversely, Filmbox~(FBX) stands out as a widely used 3D modeling file format within the 3D software industry. In this paper, we introduce a novel method that can automatically convert complex HEP detector geometries from DD4hep description into 3D models in the FBX format. The feasibility of this method was demonstrated by its application to the DD4hep description of the Compact Linear Collider detector and several sub-detectors of the super Tau-Charm facility and circular electron-positron collider experiments. The automatic DD4hep--FBX detector conversion interface provides convenience for further development of applications, such as detector design, simulation, visualization, data monitoring, and outreach, in HEP experiments. △ Less

Submitted 18 June, 2024; originally announced June 2024.

Comments: 10 pages, 16 figures

Data quality control system and long-term performance monitor of the LHAASO-KM2A

Authors: Zhen Cao, F. Aharonian, Axikegu, Y. X. Bai, Y. W. Bao, D. Bastieri, X. J. Bi, Y. J. Bi, W. Bian, A. V. Bukevich, Q. Cao, W. Y. Cao, Zhe Cao, J. Chang, J. F. Chang, A. M. Chen, E. S. Chen, H. X. Chen, Liang Chen, Lin Chen, Long Chen, M. J. Chen, M. L. Chen, Q. H. Chen, S. Chen , et al. (263 additional authors not shown)

Abstract: The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To… ▽ More The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively. △ Less

Submitted 13 June, 2024; v1 submitted 20 May, 2024; originally announced May 2024.

Comments: 15 pages, 9 figures

Visualization for physics analysis improvement and applications in BESIII

Authors: Zhi-Jun Li, Ming-Kuan Yuan, Yun-Xuan Song, Yan-Gu Li, **g-Shu Li, Sheng-Sen Sun, Xiao-Long Wang, Zheng-Yun You, Ya-Jun Mao

Abstract: Modern particle physics experiments usually rely on highly complex and large-scale spectrometer devices. In high energy physics experiments, visualization helps detector design, data quality monitoring, offline data processing, and has great potential for improving physics analysis. In addition to the traditional physics data analysis based on statistical methods, visualization provides unique int… ▽ More Modern particle physics experiments usually rely on highly complex and large-scale spectrometer devices. In high energy physics experiments, visualization helps detector design, data quality monitoring, offline data processing, and has great potential for improving physics analysis. In addition to the traditional physics data analysis based on statistical methods, visualization provides unique intuitive advantages in searching for rare signal events and reducing background noises. By applying the event display tool to several physics analyses in the BESIII experiment, we demonstrate that visualization can benefit potential physics discovery and improve the signal significance. With the development of modern visualization techniques, it is expected to play a more important role in future data processing and physics analysis of particle physics experiments. △ Less

Submitted 4 July, 2024; v1 submitted 19 March, 2024; originally announced April 2024.

Comments: 19 pages, 7 figures

Journal ref: Front. Phys. 19, 64201 (2024)

Turbulence-induced oscillation on particle detachment from a wall

Authors: Zhikai You, Yiyang Zhang, Zhu Fang, Shuiqing Li

Abstract: Particle resuspension is a ubiquitous phenomenon with pivotal relevance in numerous natural and industrial contexts. In this study, we present findings on the resuspension of individual micro-sized particles, captured through high-speed camera experiments. Our observations reveal a universal behavior whereby a particle undergoes oscillatory motion due to turbulent excitation prior to its detachmen… ▽ More Particle resuspension is a ubiquitous phenomenon with pivotal relevance in numerous natural and industrial contexts. In this study, we present findings on the resuspension of individual micro-sized particles, captured through high-speed camera experiments. Our observations reveal a universal behavior whereby a particle undergoes oscillatory motion due to turbulent excitation prior to its detachment from the surface. This motion is characterized by dimensionless number Ad and S. The frequency of particles oscillation is analyzed and it shows the frequency of particle oscillations increased with decreasing particle size. We establish a new model that the particle is a linear oscillator driven by stochastic torque from turbulence. It is shown that the stochastic oscillation is the key mechanism for particle detachment from a wall within a certain range of friction velocities. △ Less

Submitted 7 April, 2024; originally announced April 2024.

STCF Conceptual Design Report: Volume 1 -- Physics & Detector

Authors: M. Achasov, X. C. Ai, R. Aliberti, L. P. An, Q. An, X. Z. Bai, Y. Bai, O. Bakina, A. Barnyakov, V. Blinov, V. Bobrovnikov, D. Bodrov, A. Bogomyagkov, A. Bondar, I. Boyko, Z. H. Bu, F. M. Cai, H. Cai, J. J. Cao, Q. H. Cao, Z. Cao, Q. Chang, K. T. Chao, D. Y. Chen, H. Chen , et al. (413 additional authors not shown)

Abstract: The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII,… ▽ More The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII, providing a unique platform for exploring the asymmetry of matter-antimatter (charge-parity violation), in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions, as well as searching for exotic hadrons and physics beyond the Standard Model. The STCF project in China is under development with an extensive R\&D program. This document presents the physics opportunities at the STCF, describes conceptual designs of the STCF detector system, and discusses future plans for detector R\&D and physics case studies. △ Less

Submitted 5 October, 2023; v1 submitted 28 March, 2023; originally announced March 2023.

Journal ref: Front. Phys. 19(1), 14701 (2024)

The JUNO experiment Top Tracker

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato , et al. (592 additional authors not shown)

Abstract: The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector… ▽ More The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector, covering about 60% of the surface above them. The JUNO Top Tracker is constituted by the decommissioned OPERA experiment Target Tracker modules. The technology used consists in walls of two planes of plastic scintillator strips, one per transverse direction. Wavelength shifting fibres collect the light signal emitted by the scintillator strips and guide it to both ends where it is read by multianode photomultiplier tubes. Compared to the OPERA Target Tracker, the JUNO Top Tracker uses new electronics able to cope with the high rate produced by the high rock radioactivity compared to the one in Gran Sasso underground laboratory. This paper will present the new electronics and mechanical structure developed for the Top Tracker of JUNO along with its expected performance based on the current detector simulation. △ Less

Submitted 9 March, 2023; originally announced March 2023.

Comments: 20 pages

Journal ref: Nucl.Instrum.Meth.A 1057 (2023) 168680

JUNO sensitivity to $^7$Be, $pep$, and CNO solar neutrinos

Authors: Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Marco Beretta , et al. (592 additional authors not shown)

Abstract: The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented… ▽ More The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented levels of precision. In this paper, we provide estimation of the JUNO sensitivity to 7Be, pep, and CNO solar neutrinos that can be obtained via a spectral analysis above the 0.45 MeV threshold. This study is performed assuming different scenarios of the liquid scintillator radiopurity, ranging from the most opti mistic one corresponding to the radiopurity levels obtained by the Borexino experiment, up to the minimum requirements needed to perform the neutrino mass ordering determination with reactor antineutrinos - the main goal of JUNO. Our study shows that in most scenarios, JUNO will be able to improve the current best measurements on 7Be, pep, and CNO solar neutrino fluxes. We also perform a study on the JUNO capability to detect periodical time variations in the solar neutrino flux, such as the day-night modulation induced by neutrino flavor regeneration in Earth, and the modulations induced by temperature changes driven by helioseismic waves. △ Less

Submitted 7 March, 2023; originally announced March 2023.

Pressure Reconstruction from the Measured Pressure Gradient Using Gaussian Process Regression

Authors: Zejian You, Qi Wang, Xiaofeng Liu

Abstract: Many numerical algorithms have been established to reconstruct pressure fields from measured kinematic data with noise by Particle Image Velocimetry (PIV), such as the Pressure Poisson solver and the Omni-Directional Integration (ODI) method. This study adopts Gaussian Process Regression (GPR), a probabilistic framework with an intrinsic de-noising mechanism to tackle drawbacks of traditional Pres… ▽ More Many numerical algorithms have been established to reconstruct pressure fields from measured kinematic data with noise by Particle Image Velocimetry (PIV), such as the Pressure Poisson solver and the Omni-Directional Integration (ODI) method. This study adopts Gaussian Process Regression (GPR), a probabilistic framework with an intrinsic de-noising mechanism to tackle drawbacks of traditional Pressure Poisson solver and compares the performance with ODI. To evaluate the accuracy of the algorithm, GPR and ODI are tested in detail in a canonical setup of forced homogeneous isotropic turbulence from the Johns Hopkins Turbulence Database. According to the result, GPR has the same level of accuracy as ODI with optimized hyper-parameters for the isotropic turbulence flow. However, GPR has the tendency to flatten impulsive signals. Therefore, without further modifications, it is not suitable to detect flow structures with impulsive true signals. The error propagation of the proposed framework is also analyzed and discussed in both physical and spectral spaces. △ Less

Submitted 30 January, 2023; originally announced January 2023.

Simulation Software of the JUNO Experiment

Authors: Tao Lin, Yuxiang Hu, Miao Yu, Haosen Zhang, Simon Charles Blyth, Yaoguang Wang, Haoqi Lu, Cecile Jollet, João Pedro Athayde Marcondes de André, Ziyan Deng, Guofu Cao, Fengpeng An, Pietro Chimenti, Xiao Fang, Yuhang Guo, Wenhao Huang, Xingtao Huang, Rui Li, Teng Li, Weidong Li, Xinying Li, Yankai Liu, Anselmo Meregaglia, Zhen Qian, Yuhan Ren , et al. (9 additional authors not shown)

Abstract: The Jiangmen Underground Neutrino Observatory (JUNO) is a multi-purpose experiment, under construction in southeast China, that is designed to determine the neutrino mass ordering and precisely measure neutrino oscillation parameters. Monte Carlo simulation plays an important role for JUNO detector design, detector commissioning, offline data processing, and physics processing. The JUNO experiment… ▽ More The Jiangmen Underground Neutrino Observatory (JUNO) is a multi-purpose experiment, under construction in southeast China, that is designed to determine the neutrino mass ordering and precisely measure neutrino oscillation parameters. Monte Carlo simulation plays an important role for JUNO detector design, detector commissioning, offline data processing, and physics processing. The JUNO experiment has the world's largest liquid scintillator detector instrumented with many thousands of PMTs. The broad energy range of interest, long lifetime, and the large scale present data processing challenges across all areas. This paper describes the JUNO simulation software, highlighting the challenges of JUNO simulation and solutions to meet these challenges, including such issues as support for time-correlated analysis, event mixing, event correlation and handling the simulation of many millions of optical photons. △ Less

Submitted 17 May, 2023; v1 submitted 20 December, 2022; originally announced December 2022.

Journal ref: Eur. Phys. J. C 83, 382 (2023)

Spontaneous stable rotation of flocking flexible active matter

Authors: Gaoxiao Jiang, Zhihong You, Rui Ma, Chen-Xu Wu

Abstract: In nature, active matter, such as worms or dogs, tend to spontaneously form a stable rotational cluster when they flock to the same food source on an unregulated and unconfined surface. {In this paper we present an $n$-node flexible active matter model to study the collective motion due to the flocking of individual agents on a two-dimensional surface, and confirm that there exists a spontaneous s… ▽ More In nature, active matter, such as worms or dogs, tend to spontaneously form a stable rotational cluster when they flock to the same food source on an unregulated and unconfined surface. {In this paper we present an $n$-node flexible active matter model to study the collective motion due to the flocking of individual agents on a two-dimensional surface, and confirm that there exists a spontaneous stable cluster rotation synchronizing with a chirality produced by the alignment of their bodies under the impetus of the active force.} A prefactor of 1.86 is obtained for the linear relationship between normalized angular velocity and chirality. The angular velocity of such a rotation is found to be dependent on the individual flexibility, the number of nodes in each individual, and the magnitude of the active force. The conclusions well explain the spontaneous stable rotation of clusters that exists in many flexible active matter, like worms or {dogs}, when they flock to the same single source. △ Less

Submitted 16 August, 2023; v1 submitted 9 November, 2022; originally announced November 2022.

Richness out of smallness: a Possible Staged Blueprint on Future Colliders

Authors: Meng Lu, Qiang Li, Zhengyun You, Ce Zhang

Abstract: Novel collision methods and rich phenomena are crucial to kee** high-energy collision physics more robust and attractive. In this document, we present a staged blueprint for future high-energy colliders: from neutrino-neutrino collision, neutrino-lepton collision to electron-muon and muon-muon collisions. Neutrino beam from TeV scale muons is a good candidate to enrich high-energy collision prog… ▽ More Novel collision methods and rich phenomena are crucial to kee** high-energy collision physics more robust and attractive. In this document, we present a staged blueprint for future high-energy colliders: from neutrino-neutrino collision, neutrino-lepton collision to electron-muon and muon-muon collisions. Neutrino beam from TeV scale muons is a good candidate to enrich high-energy collision programs and can serve as a practical step toward a high-energy muon collider, which still requires tens of years of R&D. Neutrinos-neutrinos collision provides a promising way to probe heavy Majorana neutrinos and effective neutrino mass; neutrino and antineutrino annihilation into Z boson has a huge cross-section at 10K pb level; leptons-neutrinos collision benefits W boson mass precision measurements. With only a minimal amount of integrated luminosity, one can envision the ``Richness out of smallness''. This document summarizes the current status and the roadmap towards the muon-muon collider with less challenging techniques required through intermediate facilities, where a wide variety of physics goals could be achieved. A (preparatory) laboratory on novel colliders could attract vast international interests and collaborations. △ Less

Submitted 12 October, 2022; originally announced October 2022.

Comments: Wrap** up a few recent activities on 'exotic' collisions

Dynamics of active liquid interfaces

Authors: Raymond Adkins, Itamar Kolvin, Zhihong You, Sven Witthaus, M. Cristina Marchetti, Zvonimir Dogic

Abstract: Controlling interfaces of phase separating fluid mixtures is key to creating diverse functional soft materials. Traditionally, this is accomplished with surface-modifying chemical agents. Using experiment and theory, we study how mechanical activity shapes soft interfaces that separate an active and a passive fluid. Chaotic flows in the active fluid give rise to giant interfacial fluctuations and… ▽ More Controlling interfaces of phase separating fluid mixtures is key to creating diverse functional soft materials. Traditionally, this is accomplished with surface-modifying chemical agents. Using experiment and theory, we study how mechanical activity shapes soft interfaces that separate an active and a passive fluid. Chaotic flows in the active fluid give rise to giant interfacial fluctuations and non-inertial propagating active waves. At high activities, stresses disrupt interface continuity and drive droplet generation, producing an emulsion-like active state comprised of finite-sized droplets. When in contact with a solid boundary, active interfaces exhibit non-equilibrium wetting transitions, wherein the fluid climbs the wall against gravity. These results demonstrate the promise of mechanically driven interfaces for creating a new class of soft active matter. △ Less

Submitted 11 August, 2022; originally announced August 2022.

Comments: 62 pages, 5 figures, 13 supplementary figures

Journal ref: Science, 11 Aug 2022, Vol 377, Issue 6607 pp. 768-772

Method for detector description transformation to Unity and application in BESIII

Authors: Kai-Xuan Huang, Zhi-Jun Li, Zhen Qian, Jiang Zhu, Hao-Yuan Li, Yu-Mei Zhang, Sheng-Sen Sun, Zheng-Yun You

Abstract: Detector and event visualization are essential parts of the software used in high-energy physics (HEP) experiments. Modern visualization techniques and multimedia production platforms such as Unity provide impressive display effects and professional extensions for visualization in HEP experiments. In this study, a method for automatic detector description transformation is presented, which can con… ▽ More Detector and event visualization are essential parts of the software used in high-energy physics (HEP) experiments. Modern visualization techniques and multimedia production platforms such as Unity provide impressive display effects and professional extensions for visualization in HEP experiments. In this study, a method for automatic detector description transformation is presented, which can convert the complicated HEP detector geometry from GDML in offline software to 3D modeling in Unity. The method was successfully applied in the BESIII experiment and can be further developed into applications such as event displays, data monitoring, or virtual reality. It has great potential in detector design, offline software development, physics analysis, and outreach for next-generation HEP experiments as well as applications in nuclear techniques for the industry. △ Less

Submitted 14 November, 2022; v1 submitted 21 June, 2022; originally announced June 2022.

Comments: 10 pages,10 figures

Journal ref: NUCL SCI TECH 33, 142 (2022)

Prospects for Detecting the Diffuse Supernova Neutrino Background with JUNO

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli, Thilo Birkenfeld, Sylvie Blin , et al. (577 additional authors not shown)

Abstract: We present the detection potential for the diffuse supernova neutrino background (DSNB) at the Jiangmen Underground Neutrino Observatory (JUNO), using the inverse-beta-decay (IBD) detection channel on free protons. We employ the latest information on the DSNB flux predictions, and investigate in detail the background and its reduction for the DSNB search at JUNO. The atmospheric neutrino induced n… ▽ More We present the detection potential for the diffuse supernova neutrino background (DSNB) at the Jiangmen Underground Neutrino Observatory (JUNO), using the inverse-beta-decay (IBD) detection channel on free protons. We employ the latest information on the DSNB flux predictions, and investigate in detail the background and its reduction for the DSNB search at JUNO. The atmospheric neutrino induced neutral current (NC) background turns out to be the most critical background, whose uncertainty is carefully evaluated from both the spread of model predictions and an envisaged \textit{in situ} measurement. We also make a careful study on the background suppression with the pulse shape discrimination (PSD) and triple coincidence (TC) cuts. With latest DSNB signal predictions, more realistic background evaluation and PSD efficiency optimization, and additional TC cut, JUNO can reach the significance of 3$σ$ for 3 years of data taking, and achieve better than 5$σ$ after 10 years for a reference DSNB model. In the pessimistic scenario of non-observation, JUNO would strongly improve the limits and exclude a significant region of the model parameter space. △ Less

Submitted 13 October, 2022; v1 submitted 18 May, 2022; originally announced May 2022.

Comments: 29 pages, 11 figures, final published version in JCAP

Journal ref: JCAP 10 (2022) 033

Mass Testing and Characterization of 20-inch PMTs for JUNO

Authors: Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, Joao Pedro Athayde Marcondes de Andre, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli , et al. (541 additional authors not shown)

Abstract: Main goal of the JUNO experiment is to determine the neutrino mass ordering using a 20kt liquid-scintillator detector. Its key feature is an excellent energy resolution of at least 3 % at 1 MeV, for which its instruments need to meet a certain quality and thus have to be fully characterized. More than 20,000 20-inch PMTs have been received and assessed by JUNO after a detailed testing program whic… ▽ More Main goal of the JUNO experiment is to determine the neutrino mass ordering using a 20kt liquid-scintillator detector. Its key feature is an excellent energy resolution of at least 3 % at 1 MeV, for which its instruments need to meet a certain quality and thus have to be fully characterized. More than 20,000 20-inch PMTs have been received and assessed by JUNO after a detailed testing program which began in 2017 and elapsed for about four years. Based on this mass characterization and a set of specific requirements, a good quality of all accepted PMTs could be ascertained. This paper presents the performed testing procedure with the designed testing systems as well as the statistical characteristics of all 20-inch PMTs intended to be used in the JUNO experiment, covering more than fifteen performance parameters including the photocathode uniformity. This constitutes the largest sample of 20-inch PMTs ever produced and studied in detail to date, i.e. 15,000 of the newly developed 20-inch MCP-PMTs from Northern Night Vision Technology Co. (NNVT) and 5,000 of dynode PMTs from Hamamatsu Photonics K. K.(HPK). △ Less

Submitted 17 September, 2022; v1 submitted 17 May, 2022; originally announced May 2022.

Improving the machine learning based vertex reconstruction for large liquid scintillator detectors with multiple types of PMTs

Authors: Zi-Yuan Li, Zhen Qian, Jie-Han He, Wei He, Cheng-Xin Wu, Xun-Ye Cai, Zheng-Yun You, Yu-Mei Zhang, Wu-Ming Luo

Abstract: Precise vertex reconstruction is essential for large liquid scintillator detectors. A novel method based on machine learning has been successfully developed to reconstruct the event vertex in JUNO previously. In this paper, the performance of machine learning based vertex reconstruction is further improved by optimizing the input images of the neural networks. By separating the information of diff… ▽ More Precise vertex reconstruction is essential for large liquid scintillator detectors. A novel method based on machine learning has been successfully developed to reconstruct the event vertex in JUNO previously. In this paper, the performance of machine learning based vertex reconstruction is further improved by optimizing the input images of the neural networks. By separating the information of different types of PMTs as well as adding the information of the second hit of PMTs, the vertex resolution is improved by about 9.4 % at 1 MeV and 9.8 % at 11 MeV, respectively. △ Less

Submitted 9 May, 2022; originally announced May 2022.

The physics case for a neutrino lepton collider in light of the CDF W mass measurement

Authors: Tianyi Yang, Sitian Qian, Sen Deng, Jie Xiao, Leyun Gao, Andrew Michael Levin, Qiang Li, Meng Lu, Zhengyun You

Abstract: We propose a neutrino lepton collider where the neutrino beam is generated from TeV scale muon decays. Such a device would allow for a precise measurement of the W mass based on single W production: nu l to W. Although it is challenging to achieve high instantaneous luminosity with such a collider, we find that a total luminosity of 0.1/fb can already yield competitive physics results. In addition… ▽ More We propose a neutrino lepton collider where the neutrino beam is generated from TeV scale muon decays. Such a device would allow for a precise measurement of the W mass based on single W production: nu l to W. Although it is challenging to achieve high instantaneous luminosity with such a collider, we find that a total luminosity of 0.1/fb can already yield competitive physics results. In addition to a W mass measurement, a rich variety of physics goals could be achieved with such a collider, including W boson precision measurements, heavy leptophilic gauge boson searches, and anomalous Znunu coupling searches. A neutrino lepton collider is both a novel idea in itself, and may also be a useful intermediate step, with less muon cooling required, towards the muon-muon collider already being pursued by the energy frontier community. A neutrino neutrino or neutrino proton collider may also be interesting future options for the high energy frontier. △ Less

Submitted 25 August, 2022; v1 submitted 25 April, 2022; originally announced April 2022.

Comments: 4 pages, 5 plots, accepted version by IJMPA

Quality Control of Mass-Produced GEM Detectors for the CMS GE1/1 Muon Upgrade

Authors: M. Abbas, M. Abbrescia, H. Abdalla, A. Abdelalim, S. AbuZeid, A. Agapitos, A. Ahmad, A. Ahmed, W. Ahmed, C. Aimè, C. Aruta, I. Asghar, P. Aspell, C. Avila, J. Babbar, Y. Ban, R. Band, S. Bansal, L. Benussi, T. Beyrouthy, V. Bhatnagar, M. Bianco, S. Bianco, K. Black, L. Borgonovi , et al. (157 additional authors not shown)

Abstract: The series of upgrades to the Large Hadron Collider, culminating in the High Luminosity Large Hadron Collider, will enable a significant expansion of the physics program of the CMS experiment. However, the accelerator upgrades will also make the experimental conditions more challenging, with implications for detector operations, triggering, and data analysis. The luminosity of the proton-proton co… ▽ More The series of upgrades to the Large Hadron Collider, culminating in the High Luminosity Large Hadron Collider, will enable a significant expansion of the physics program of the CMS experiment. However, the accelerator upgrades will also make the experimental conditions more challenging, with implications for detector operations, triggering, and data analysis. The luminosity of the proton-proton collisions is expected to exceed $2-3\times10^{34}$~cm$^{-2}$s$^{-1}$ for Run 3 (starting in 2022), and it will be at least $5\times10^{34}$~cm$^{-2}$s$^{-1}$ when the High Luminosity Large Hadron Collider is completed for Run 4. These conditions will affect muon triggering, identification, and measurement, which are critical capabilities of the experiment. To address these challenges, additional muon detectors are being installed in the CMS endcaps, based on Gas Electron Multiplier technology. For this purpose, 161 large triple-Gas Electron Multiplier detectors have been constructed and tested. Installation of these devices began in 2019 with the GE1/1 station and will be followed by two additional stations, GE2/1 and ME0, to be installed in 2023 and 2026, respectively. The assembly and quality control of the GE1/1 detectors were distributed across several production sites around the world. We motivate and discuss the quality control procedures that were developed to standardize the performance of the detectors, and we present the final results of the production. Out of 161 detectors produced, 156 detectors passed all tests, and 144 detectors are now installed in the CMS experiment. The various visual inspections, gas tightness tests, intrinsic noise rate characterizations, and effective gas gain and response uniformity tests allowed the project to achieve this high success rate. △ Less

Submitted 22 March, 2022; originally announced March 2022.

Comments: 45 pages, 39 figures, submitted to Nuclear Instruments and Methods in Physics Research Section A

Performance of a Triple-GEM Demonstrator in $pp$ Collisions at the CMS Detector

Authors: M. Abbas, M. Abbrescia, H. Abdalla, A. Abdelalim, S. AbuZeid, A. Agapitos, A. Ahmad, A. Ahmed, W. Ahmed, C. Aimè, C. Aruta, I. Asghar, P. Aspell, C. Avila, J. Babbar, Y. Ban, R. Band, S. Bansal, L. Benussi, V. Bhatnagar, M. Bianco, S. Bianco, K. Black, L. Borgonovi, O. Bouhali , et al. (156 additional authors not shown)

Abstract: After the Phase-2 high-luminosity upgrade to the Large Hadron Collider (LHC), the collision rate and therefore the background rate will significantly increase, particularly in the high $η$ region. To improve both the tracking and triggering of muons, the Compact Muon Solenoid (CMS) Collaboration plans to install triple-layer Gas Electron Multiplier (GEM) detectors in the CMS muon endcaps. Demonstr… ▽ More After the Phase-2 high-luminosity upgrade to the Large Hadron Collider (LHC), the collision rate and therefore the background rate will significantly increase, particularly in the high $η$ region. To improve both the tracking and triggering of muons, the Compact Muon Solenoid (CMS) Collaboration plans to install triple-layer Gas Electron Multiplier (GEM) detectors in the CMS muon endcaps. Demonstrator GEM detectors were installed in CMS during 2017 to gain operational experience and perform a preliminary investigation of detector performance. We present the results of triple-GEM detector performance studies performed in situ during normal CMS and LHC operations in 2018. The distribution of cluster size and the efficiency to reconstruct high $p_T$ muons in proton--proton collisions are presented as well as the measurement of the environmental background rate to produce hits in the GEM detector. △ Less

Submitted 22 September, 2021; v1 submitted 20 July, 2021; originally announced July 2021.

Comments: 10 pages, 5 figures

Radioactivity control strategy for the JUNO detector

Authors: JUNO collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli, Thilo Birkenfeld, Sylvie Blin , et al. (578 additional authors not shown)

Abstract: JUNO is a massive liquid scintillator detector with a primary scientific goal of determining the neutrino mass ordering by studying the oscillated anti-neutrino flux coming from two nuclear power plants at 53 km distance. The expected signal anti-neutrino interaction rate is only 60 counts per day, therefore a careful control of the background sources due to radioactivity is critical. In particula… ▽ More JUNO is a massive liquid scintillator detector with a primary scientific goal of determining the neutrino mass ordering by studying the oscillated anti-neutrino flux coming from two nuclear power plants at 53 km distance. The expected signal anti-neutrino interaction rate is only 60 counts per day, therefore a careful control of the background sources due to radioactivity is critical. In particular, natural radioactivity present in all materials and in the environment represents a serious issue that could impair the sensitivity of the experiment if appropriate countermeasures were not foreseen. In this paper we discuss the background reduction strategies undertaken by the JUNO collaboration to reduce at minimum the impact of natural radioactivity. We describe our efforts for an optimized experimental design, a careful material screening and accurate detector production handling, and a constant control of the expected results through a meticulous Monte Carlo simulation program. We show that all these actions should allow us to keep the background count rate safely below the target value of 10 Hz in the default fiducial volume, above an energy threshold of 0.7 MeV. △ Less

Submitted 13 October, 2021; v1 submitted 8 July, 2021; originally announced July 2021.

Comments: 35 pages, 12 figures

Modeling the triple-GEM detector response to background particles for the CMS Experiment

Authors: M. Abbas, M. Abbrescia, H. Abdalla, A. Abdelalim, S. AbuZeid, A. Agapitos, A. Ahmad, A. Ahmed, W. Ahmed, C. Aimè, C. Aruta, I. Asghar, P. Aspell, C. Avila, I. Azhgirey, J. Babbar, Y. Ban, R. Band, S. Bansal, L. Benussi, V. Bhatnagar, M. Bianco, S. Bianco, K. Black, L. Borgonovi , et al. (164 additional authors not shown)

Abstract: An estimate of environmental background hit rate on triple-GEM chambers is performed using Monte Carlo (MC) simulation and compared to data taken by test chambers installed in the CMS experiment (GE1/1) during Run-2 at the Large Hadron Collider (LHC). The hit rate is measured using data collected with proton-proton collisions at 13 TeV and a luminosity of 1.5$\times10^{34}$ cm$^{-2}$ s$^{-1}$. The… ▽ More An estimate of environmental background hit rate on triple-GEM chambers is performed using Monte Carlo (MC) simulation and compared to data taken by test chambers installed in the CMS experiment (GE1/1) during Run-2 at the Large Hadron Collider (LHC). The hit rate is measured using data collected with proton-proton collisions at 13 TeV and a luminosity of 1.5$\times10^{34}$ cm$^{-2}$ s$^{-1}$. The simulation framework uses a combination of the FLUKA and Geant4 packages to obtain the hit rate. FLUKA provides the radiation environment around the GE1/1 chambers, which is comprised of the particle flux with momentum direction and energy spectra ranging from $10^{-11}$ to $10^{4}$ MeV for neutrons, $10^{-3}$ to $10^{4}$ MeV for $γ$'s, $10^{-2}$ to $10^{4}$ MeV for $e^{\pm}$, and $10^{-1}$ to $10^{4}$ MeV for charged hadrons. Geant4 provides an estimate of detector response (sensitivity) based on an accurate description of detector geometry, material composition and interaction of particles with the various detector layers. The MC simulated hit rate is estimated as a function of the perpendicular distance from the beam line and agrees with data within the assigned uncertainties of 10-14.5%. This simulation framework can be used to obtain a reliable estimate of background rates expected at the High Luminosity LHC. △ Less

Submitted 8 July, 2021; originally announced July 2021.

Comments: 16 pages, 9 figures, 6 tables

The Design and Sensitivity of JUNO's scintillator radiopurity pre-detector OSIRIS

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Guangpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli, Thilo Birkenfeld , et al. (582 additional authors not shown)

Abstract: The OSIRIS detector is a subsystem of the liquid scintillator fillling chain of the JUNO reactor neutrino experiment. Its purpose is to validate the radiopurity of the scintillator to assure that all components of the JUNO scintillator system work to specifications and only neutrino-grade scintillator is filled into the JUNO Central Detector. The aspired sensitivity level of $10^{-16}$ g/g of… ▽ More The OSIRIS detector is a subsystem of the liquid scintillator fillling chain of the JUNO reactor neutrino experiment. Its purpose is to validate the radiopurity of the scintillator to assure that all components of the JUNO scintillator system work to specifications and only neutrino-grade scintillator is filled into the JUNO Central Detector. The aspired sensitivity level of $10^{-16}$ g/g of $^{238}$U and $^{232}$Th requires a large ($\sim$20 m$^3$) detection volume and ultralow background levels. The present paper reports on the design and major components of the OSIRIS detector, the detector simulation as well as the measuring strategies foreseen and the sensitivity levels to U/Th that can be reached in this setup. △ Less

Submitted 31 March, 2021; originally announced March 2021.

Comments: 32 pages, 22 figures

Computing Shor's algorithmic steps with classical light beams

Authors: Wei Wang, Ziyang You, Shuangpeng Wang, Zikang Tang, Hou Ian

Abstract: When considered as orthogonal bases in distinct vector spaces, the unit vectors of polarization directions and the Laguerre-Gaussian modes of polarization amplitude are inseparable, constituting a so-called classical entangled light beam. Equating this classical entanglement to quantum entanglement necessary for computing purpose, we show that the parallelism featured in Shor's factoring algorithm… ▽ More When considered as orthogonal bases in distinct vector spaces, the unit vectors of polarization directions and the Laguerre-Gaussian modes of polarization amplitude are inseparable, constituting a so-called classical entangled light beam. Equating this classical entanglement to quantum entanglement necessary for computing purpose, we show that the parallelism featured in Shor's factoring algorithm is equivalent to the concurrent light-path propagation of an entangled beam or pulse train. A gedanken experiment is proposed for executing the key algorithmic steps of modular exponentiation and Fourier transform on a target integer $N$ using only classical manipulations on the amplitudes and polarization directions. The multiplicative order associated with the sought-after integer factors is identified through a four-hole diffraction interference from sources obtained from the entangled beam profile. The unique map** from the fringe patterns to the computed order is demonstrated through simulations for the case $N=15$. △ Less

Submitted 3 January, 2023; v1 submitted 30 March, 2021; originally announced March 2021.

Journal ref: Scientific Reports 12, 21157 (2022)

Three-dimensional Kinematic Metamaterial with tuneable directional permeability

Authors: Yunfang Yang, Perla Maiolino, Yan Chen, Zhong You

Abstract: Reconfigurable metamaterials are constructed from tessellation of deformable modules that give rise to a set of tuneable properties. To date, most research focuses on metamaterials that morph between final configurations along a single deformation path. Multi-pathway metamaterials that can transform into several different shapes according to various external stimuli are rare. Here we propose a kin… ▽ More Reconfigurable metamaterials are constructed from tessellation of deformable modules that give rise to a set of tuneable properties. To date, most research focuses on metamaterials that morph between final configurations along a single deformation path. Multi-pathway metamaterials that can transform into several different shapes according to various external stimuli are rare. Here we propose a kinematic based metamaterial with multiple predefined deformation paths. The inherent kinematic bifurcations of the deformable unit cells enable the metamaterial to switch among different paths under simple stimuli at one particular configuration, resulting in the enhancement of reconfigurability. The metamaterials demonstrated in this paper can provide multiple open channels in different orthogonal directions, making them suitable for multifunctional applications such as tuneable filters and reconfigurable wave guiding materials. △ Less

Submitted 17 February, 2021; originally announced February 2021.

Event vertex and time reconstruction in large volume liquid scintillator detector

Authors: Ziyuan Li, Yumei Zhang, Guofu Cao, Ziyan Deng, Guihong Huang, Weidong Li, Tao Lin, Liangjian Wen, Miao Yu, Jiaheng Zou, Wuming Luo, Zhengyun You

Abstract: Large-volume liquid scintillator detectors with ultra-low background levels have been widely used to study neutrino physics and search for dark matter. Event vertex and event time are not only useful for event selection but also essential for the reconstruction of event energy. In this study, four event vertex and event time reconstruction algorithms using charge and time information collected by… ▽ More Large-volume liquid scintillator detectors with ultra-low background levels have been widely used to study neutrino physics and search for dark matter. Event vertex and event time are not only useful for event selection but also essential for the reconstruction of event energy. In this study, four event vertex and event time reconstruction algorithms using charge and time information collected by photomultiplier tubes were analyzed comprehensively. The effects of photomultiplier tube properties were also investigated. The results indicate that the transit time spread is the main effect degrading the vertex reconstruction, while the effect of dark noise is limited. In addition, when the event is close to the detector boundary, the charge information provides better performance for vertex reconstruction than the time information. △ Less

Submitted 13 May, 2021; v1 submitted 21 January, 2021; originally announced January 2021.

Comments: 11 pages, 16 figures

Journal ref: NUCL SCI TECH (2021)32:49

Vertex and Energy Reconstruction in JUNO with Machine Learning Methods

Authors: Zhen Qian, Vladislav Belavin, Vasily Bokov, Riccardo Brugnera, Alessandro Compagnucci, Arsenii Gavrikov, Alberto Garfagnini, Maxim Gonchar, Leyla Khatbullina, Ziyuan Li, Wuming Luo, Yury Malyshkin, Samuele Piccinelli, Ivan Provilkov, Fedor Ratnikov, Dmitry Selivanov, Konstantin Treskov, Andrey Ustyuzhanin, Francesco Vidaich, Zhengyun You, Yumei Zhang, Jiang Zhu, Francesco Manzali

Abstract: The Jiangmen Underground Neutrino Observatory (JUNO) is an experiment designed to study neutrino oscillations. Determination of neutrino mass ordering and precise measurement of neutrino oscillation parameters $\sin^2 2θ_{12}$, $Δm^2_{21}$ and $Δm^2_{32}$ are the main goals of the experiment. A rich physical program beyond the oscillation analysis is also foreseen. The ability to accurately recons… ▽ More The Jiangmen Underground Neutrino Observatory (JUNO) is an experiment designed to study neutrino oscillations. Determination of neutrino mass ordering and precise measurement of neutrino oscillation parameters $\sin^2 2θ_{12}$, $Δm^2_{21}$ and $Δm^2_{32}$ are the main goals of the experiment. A rich physical program beyond the oscillation analysis is also foreseen. The ability to accurately reconstruct particle interaction events in JUNO is of great importance for the success of the experiment. In this work we present a few machine learning approaches applied to the vertex and the energy reconstruction. Multiple models and architectures were compared and studied, including Boosted Decision Trees (BDT), Deep Neural Networks (DNN), a few kinds of Convolution Neural Networks (CNN), based on ResNet and VGG, and a Graph Neural Network based on DeepSphere. Based on a study, carried out using the dataset, generated by the official JUNO software, we demonstrate that machine learning approaches achieve the necessary level of accuracy for reaching the physical goals of JUNO: $σ_E=3\%$ at $E_\text{vis}=1~\text{MeV}$ for the energy and $σ_{x,y,z}=10~\text{cm}$ at $E_\text{vis}=1~\text{MeV}$ for the position. △ Less

Submitted 15 January, 2021; v1 submitted 12 January, 2021; originally announced January 2021.

Comments: 30 pages, 21 figures

Construction and On-site Performance of the LHAASO WFCTA Camera

Authors: F. Aharonian, Q. An, Axikegu, L. X. Bai, Y. X. Bai, Y. W. Bao, D. Bastieri, X. J. Bi, Y. J. Bi, H. Cai, J. T. Cai, Z. Cao, Z. Cao, J. Chang, J. F. Chang, X. C. Chang, B. M. Chen, J. Chen, L. Chen, L. Chen, L. Chen, M. J. Chen, M. L. Chen, Q. H. Chen, S. H. Chen , et al. (234 additional authors not shown)

Abstract: The focal plane camera is the core component of the Wide Field-of-view Cherenkov/fluorescence Telescope Array (WFCTA) of the Large High-Altitude Air Shower Observatory (LHAASO). Because of the capability of working under moonlight without aging, silicon photomultipliers (SiPM) have been proven to be not only an alternative but also an improvement to conventional photomultiplier tubes (PMT) in this… ▽ More The focal plane camera is the core component of the Wide Field-of-view Cherenkov/fluorescence Telescope Array (WFCTA) of the Large High-Altitude Air Shower Observatory (LHAASO). Because of the capability of working under moonlight without aging, silicon photomultipliers (SiPM) have been proven to be not only an alternative but also an improvement to conventional photomultiplier tubes (PMT) in this application. Eighteen SiPM-based cameras with square light funnels have been built for WFCTA. The telescopes have collected more than 100 million cosmic ray events and preliminary results indicate that these cameras are capable of working under moonlight. The characteristics of the light funnels and SiPMs pose challenges (e.g. dynamic range, dark count rate, assembly techniques). In this paper, we present the design features, manufacturing techniques and performances of these cameras. Finally, the test facilities, the test methods and results of SiPMs in the cameras are reported here. △ Less

Submitted 4 July, 2021; v1 submitted 29 December, 2020; originally announced December 2020.

Comments: 45 pages, 21 figures, article

Journal ref: Eur. Phys. J. C 81, 657 (2021)

A method for sharing dynamic geometry information in studies on liquid-based detectors

Authors: Shu Zhang, **g-Shu Li, Yang-Jie Su, Yu-Mei Zhang, Zi-Yuan Li, Zheng-Yun You

Abstract: The liquid-based detectors are widely used in particle and nuclear physics experiments. Due to the fixed way of constructing geometry in detector simulation such as Geant4, it is usually difficult to describe the non-uniformity of liquid in detectors. We propose a method based on GDML and tessellated detector description to share the detector geometry information between Computational Fluid Dynami… ▽ More The liquid-based detectors are widely used in particle and nuclear physics experiments. Due to the fixed way of constructing geometry in detector simulation such as Geant4, it is usually difficult to describe the non-uniformity of liquid in detectors. We propose a method based on GDML and tessellated detector description to share the detector geometry information between Computational Fluid Dynamics (CFD) simulation software and detector simulation software. The method makes it possible to study the impact of liquid flow and non-uniformity on some key performance of the liquid-based detectors, such as event vertex reconstruction resolution. It will also be helpful in detector design and performance optimization. △ Less

Submitted 10 March, 2021; v1 submitted 15 December, 2020; originally announced December 2020.

Comments: 10 pages, 18 figures

Journal ref: NUCL SCI TECH 32, 21 (2021)

Calibration Strategy of the JUNO Experiment

Authors: JUNO collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Guangpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Eric Baussan, Marco Bellato, Antonio Bergnoli, Enrico Bernieri, Thilo Birkenfeld , et al. (571 additional authors not shown)

Abstract: We present the calibration strategy for the 20 kton liquid scintillator central detector of the Jiangmen Underground Neutrino Observatory (JUNO). By utilizing a comprehensive multiple-source and multiple-positional calibration program, in combination with a novel dual calorimetry technique exploiting two independent photosensors and readout systems, we demonstrate that the JUNO central detector ca… ▽ More We present the calibration strategy for the 20 kton liquid scintillator central detector of the Jiangmen Underground Neutrino Observatory (JUNO). By utilizing a comprehensive multiple-source and multiple-positional calibration program, in combination with a novel dual calorimetry technique exploiting two independent photosensors and readout systems, we demonstrate that the JUNO central detector can achieve a better than 1% energy linearity and a 3% effective energy resolution, required by the neutrino mass ordering determination. △ Less

Submitted 20 January, 2021; v1 submitted 12 November, 2020; originally announced November 2020.

Interstrip Capacitances of the Readout Board used in Large Triple-GEM Detectors for the CMS Muon Upgrade

Authors: M. Abbas, M. Abbrescia, H. Abdalla, A. Abdelalim, S. AbuZeid, A. Agapitos, A. Ahmad, A. Ahmed, W. Ahmed, C. Aimè, C. Aruta, I. Asghar, P. Aspell, C. Avila, J. Babbar, Y. Ban, R. Band, S. Bansal, L. Benussi, V. Bhatnagar, M. Bianco, S. Bianco, K. Black, L. Borgonovi, O. Bouhali , et al. (156 additional authors not shown)

Abstract: We present analytical calculations, Finite Element Analysis modeling, and physical measurements of the interstrip capacitances for different potential strip geometries and dimensions of the readout boards for the GE2/1 triple-Gas Electron Multiplier detector in the CMS muon system upgrade. The main goal of the study is to find configurations that minimize the interstrip capacitances and consequent… ▽ More We present analytical calculations, Finite Element Analysis modeling, and physical measurements of the interstrip capacitances for different potential strip geometries and dimensions of the readout boards for the GE2/1 triple-Gas Electron Multiplier detector in the CMS muon system upgrade. The main goal of the study is to find configurations that minimize the interstrip capacitances and consequently maximize the signal-to-noise ratio for the detector. We find agreement at the 1.5--4.8% level between the two methods of calculations and on the average at the 17% level between calculations and measurements. A configuration with halved strip lengths and doubled strip widths results in a measured 27--29% reduction over the original configuration while leaving the total number of strips unchanged. We have now adopted this design modification for all eight module types of the GE2/1 detector and will produce the final detector with this new strip design. △ Less

Submitted 20 September, 2020; originally announced September 2020.

Comments: 22 pages, 14 figures

Journal ref: 2020 JINST 15 P12019

Measurement of classical entanglement using interference fringes

Authors: Ziyang You, Zikang Tang, Hou Ian

Abstract: Classical entanglement refers to non-separable correlations between the polarization direction and the polarization amplitude of a light field. The degree of entanglement is quantified by the Schmidt number, taking the value of unity for a separable state and two for a maximally entangled state. We propose two detection methods to determine this number based on the distinguishable patterns of inte… ▽ More Classical entanglement refers to non-separable correlations between the polarization direction and the polarization amplitude of a light field. The degree of entanglement is quantified by the Schmidt number, taking the value of unity for a separable state and two for a maximally entangled state. We propose two detection methods to determine this number based on the distinguishable patterns of interference between four light sources derived from the unknown laser beam to be detected. The second method being a modification of the first one has the interference fringes form discernable angles uniquely related to the entangled state. The maximally entangled state corresponds to fringes symmetric about the diagonal axis at either 45° or 135° direction while the separable state corresponds to fringes symmetric either about the X- or Y-axis or both simultaneously. States with Schmidt number between unity and two have fringes of symmetric angles between these two extremes. The detection methods would be beneficial to constructing transmission channels of information contained in the classically entangled states. △ Less

Submitted 19 May, 2021; v1 submitted 28 August, 2020; originally announced August 2020.

Journal ref: JOSA B 38(6), 1798-1805 (2021)

Optimization of the JUNO liquid scintillator composition using a Daya Bay antineutrino detector

Authors: Daya Bay, JUNO collaborations, :, A. Abusleme, T. Adam, S. Ahmad, S. Aiello, M. Akram, N. Ali, F. P. An, G. P. An, Q. An, G. Andronico, N. Anfimov, V. Antonelli, T. Antoshkina, B. Asavapibhop, J. P. A. M. de André, A. Babic, A. B. Balantekin, W. Baldini, M. Baldoncini, H. R. Band, A. Barresi, E. Baussan , et al. (642 additional authors not shown)

Abstract: To maximize the light yield of the liquid scintillator (LS) for the Jiangmen Underground Neutrino Observatory (JUNO), a 20 t LS sample was produced in a pilot plant at Daya Bay. The optical properties of the new LS in various compositions were studied by replacing the gadolinium-loaded LS in one antineutrino detector. The concentrations of the fluor, PPO, and the wavelength shifter, bis-MSB, were… ▽ More To maximize the light yield of the liquid scintillator (LS) for the Jiangmen Underground Neutrino Observatory (JUNO), a 20 t LS sample was produced in a pilot plant at Daya Bay. The optical properties of the new LS in various compositions were studied by replacing the gadolinium-loaded LS in one antineutrino detector. The concentrations of the fluor, PPO, and the wavelength shifter, bis-MSB, were increased in 12 steps from 0.5 g/L and <0.01 mg/L to 4 g/L and 13 mg/L, respectively. The numbers of total detected photoelectrons suggest that, with the optically purified solvent, the bis-MSB concentration does not need to be more than 4 mg/L. To bridge the one order of magnitude in the detector size difference between Daya Bay and JUNO, the Daya Bay data were used to tune the parameters of a newly developed optical model. Then, the model and tuned parameters were used in the JUNO simulation. This enabled to determine the optimal composition for the JUNO LS: purified solvent LAB with 2.5 g/L PPO, and 1 to 4 mg/L bis-MSB. △ Less

Submitted 1 July, 2020; originally announced July 2020.

Comments: 13 pages, 8 figures

Feasibility and physics potential of detecting $^8$B solar neutrinos at JUNO

Authors: JUNO collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Sebastiano Aiello, Muhammad Akram, Nawab Ali, Fengpeng An, Guangpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Eric Baussan, Marco Bellato, Antonio Bergnoli, Enrico Bernieri, David Biare , et al. (572 additional authors not shown)

Abstract: The Jiangmen Underground Neutrino Observatory~(JUNO) features a 20~kt multi-purpose underground liquid scintillator sphere as its main detector. Some of JUNO's features make it an excellent experiment for $^8$B solar neutrino measurements, such as its low-energy threshold, its high energy resolution compared to water Cherenkov detectors, and its much large target mass compared to previous liquid s… ▽ More The Jiangmen Underground Neutrino Observatory~(JUNO) features a 20~kt multi-purpose underground liquid scintillator sphere as its main detector. Some of JUNO's features make it an excellent experiment for $^8$B solar neutrino measurements, such as its low-energy threshold, its high energy resolution compared to water Cherenkov detectors, and its much large target mass compared to previous liquid scintillator detectors. In this paper we present a comprehensive assessment of JUNO's potential for detecting $^8$B solar neutrinos via the neutrino-electron elastic scattering process. A reduced 2~MeV threshold on the recoil electron energy is found to be achievable assuming the intrinsic radioactive background $^{238}$U and $^{232}$Th in the liquid scintillator can be controlled to 10$^{-17}$~g/g. With ten years of data taking, about 60,000 signal and 30,000 background events are expected. This large sample will enable an examination of the distortion of the recoil electron spectrum that is dominated by the neutrino flavor transformation in the dense solar matter, which will shed new light on the tension between the measured electron spectra and the predictions of the standard three-flavor neutrino oscillation framework. If $Δm^{2}_{21}=4.8\times10^{-5}~(7.5\times10^{-5})$~eV$^{2}$, JUNO can provide evidence of neutrino oscillation in the Earth at the about 3$σ$~(2$σ$) level by measuring the non-zero signal rate variation with respect to the solar zenith angle. Moveover, JUNO can simultaneously measure $Δm^2_{21}$ using $^8$B solar neutrinos to a precision of 20\% or better depending on the central value and to sub-percent precision using reactor antineutrinos. A comparison of these two measurements from the same detector will help elucidate the current tension between the value of $Δm^2_{21}$ reported by solar neutrino experiments and the KamLAND experiment. △ Less

Submitted 21 June, 2020; originally announced June 2020.

Comments: 29 pages, 14 plots, 7 tables

TAO Conceptual Design Report: A Precision Measurement of the Reactor Antineutrino Spectrum with Sub-percent Energy Resolution

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Sebastiano Aiello, Muhammad Akram, Nawab Ali, Fengpeng An, Guangpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Eric Baussan, Marco Bellato, Antonio Bergnoli, Enrico Bernieri, David Biare , et al. (568 additional authors not shown)

Abstract: The Taishan Antineutrino Observatory (TAO, also known as JUNO-TAO) is a satellite experiment of the Jiangmen Underground Neutrino Observatory (JUNO). A ton-level liquid scintillator detector will be placed at about 30 m from a core of the Taishan Nuclear Power Plant. The reactor antineutrino spectrum will be measured with sub-percent energy resolution, to provide a reference spectrum for future re… ▽ More The Taishan Antineutrino Observatory (TAO, also known as JUNO-TAO) is a satellite experiment of the Jiangmen Underground Neutrino Observatory (JUNO). A ton-level liquid scintillator detector will be placed at about 30 m from a core of the Taishan Nuclear Power Plant. The reactor antineutrino spectrum will be measured with sub-percent energy resolution, to provide a reference spectrum for future reactor neutrino experiments, and to provide a benchmark measurement to test nuclear databases. A spherical acrylic vessel containing 2.8 ton gadolinium-doped liquid scintillator will be viewed by 10 m^2 Silicon Photomultipliers (SiPMs) of >50% photon detection efficiency with almost full coverage. The photoelectron yield is about 4500 per MeV, an order higher than any existing large-scale liquid scintillator detectors. The detector operates at -50 degree C to lower the dark noise of SiPMs to an acceptable level. The detector will measure about 2000 reactor antineutrinos per day, and is designed to be well shielded from cosmogenic backgrounds and ambient radioactivities to have about 10% background-to-signal ratio. The experiment is expected to start operation in 2022. △ Less

Submitted 18 May, 2020; originally announced May 2020.

Comments: 134 pages, 114 figures

Nonreciprocity as a generic route to traveling states

Authors: Zhihong You, Aparna Baskaran, M. Cristina Marchetti

Abstract: We examine a non-reciprocally coupled dynamical model of a mixture of two diffusing species. We demonstrate that nonreciprocity, which is encoded in the model via antagonistic cross diffusivities, provides a generic mechanism for the emergence of traveling patterns in purely diffusive systems with conservative dynamics. In the absence of non-reciprocity, the binary fluid mixture undergoes a phase… ▽ More We examine a non-reciprocally coupled dynamical model of a mixture of two diffusing species. We demonstrate that nonreciprocity, which is encoded in the model via antagonistic cross diffusivities, provides a generic mechanism for the emergence of traveling patterns in purely diffusive systems with conservative dynamics. In the absence of non-reciprocity, the binary fluid mixture undergoes a phase transition from a homogeneous mixed state to a demixed state with spatially separated regions rich in one of the two components. Above a critical value of the parameter tuning non-reciprocity, the static demixed pattern acquires a finite velocity, resulting in a state that breaks both spatial and time translational symmetry, as well as the reflection parity of the static pattern. We elucidate the generic nature of the transition to traveling patterns using a minimal model that can be studied analytically. Our work has direct relevance to nonequilibrium assembly in mixtures of chemically interacting colloids that are known to exhibit non-reciprocal effective interactions, as well as to mixtures of active and passive agents where traveling states of the type predicted here have been observed in simulations. It also provides insight on transitions to traveling and oscillatory states seen in a broad range of nonreciprocal systems with non-conservative dynamics, from reaction-diffusion and prey-predators models to multispecies mixtures of microorganisms with antagonistic interactions. △ Less

Submitted 20 August, 2020; v1 submitted 15 May, 2020; originally announced May 2020.

Comments: 8 pages, 3 figures

Journal ref: Proc. Natl. Acad. Sci. U.S.A. 117(33), 19767 (2020)

Confinement-induced self-organization in growing bacterial colonies

Authors: Zhihong You, Daniel J. G. Pearce, Luca Giomi

Abstract: We investigate the emergence of global alignment in colonies of dividing rod-shaped cells under confinement. Using molecular dynamics simulations and continuous modeling, we demonstrate that geometrical anisotropies in the confining environment give rise to imbalance in the normal stresses, which, in turn, drives a collective rearrangement of the cells. This behavior crucially relies on the colony… ▽ More We investigate the emergence of global alignment in colonies of dividing rod-shaped cells under confinement. Using molecular dynamics simulations and continuous modeling, we demonstrate that geometrical anisotropies in the confining environment give rise to imbalance in the normal stresses, which, in turn, drives a collective rearrangement of the cells. This behavior crucially relies on the colony's solid-like mechanical response at short time scales and can be recovered within the framework of active hydrodynamics upon modeling bacterial colonies as growing viscoelastic gels characterized by Maxwell-like stress relaxation. △ Less

Submitted 22 January, 2021; v1 submitted 30 April, 2020; originally announced April 2020.

Comments: 10 pages, 8 figures

Journal ref: Sci. Adv. 7(4), eabc8685 (2021)

A new theory of fluid-solid coupling in a porous medium for application to the ultrasonic evaluation of tissue remodeling using bioelastomers

Authors: Chuanyang Jiang, Yanying Zhu, Kaixuan Guo, Qing Li, Zhengwei You, Jiao Yu

Abstract: Bioelastomers have demonstrated tremendous value and potential in the field of tissue repair due to increasing health demands. Improved non-invasive methods are required for monitoring tissue development assisted by bioelastomers. In this paper, we present a novel theory of fluid-solid coupling in a porous medium for application to the ultrasonic evaluation of tissue remodeling using bioelastomers… ▽ More Bioelastomers have demonstrated tremendous value and potential in the field of tissue repair due to increasing health demands. Improved non-invasive methods are required for monitoring tissue development assisted by bioelastomers. In this paper, we present a novel theory of fluid-solid coupling in a porous medium for application to the ultrasonic evaluation of tissue remodeling using bioelastomers. The common assumption of equal solid and liquid displacements used in the conventional description of a fluid-saturated porous solid cannot be applied to soft media, such as bioelastomers. We revise the geoacoustic theory of Biot to allow for relative motion between a fluid and a solid in an aggregate and derive an expression for a characteristic fluid-solid coupling parameter. Unlike the conventional method, the propagation speed of shear waves observed by ultrasound shear wave elastography is considered a known quantity in the novel theory, and the calculated value of the coupling parameter is used to evaluate the status of tissue repair. The model is validated by analyzing selected cases. The conditions under which the model can be applied are identified. However, further development of the theory is required to extract dynamic parameters that can be used to monitor the entire tissue remodeling process. In this paper, a theoretical approach is developed that can be used to analyze the mechanics of tissue repair. The theory has potential applications in the field of acellular in situ tissue engineering for non-invasive monitoring of the complex mechanical remodeling process of tissue regeneration and bioelastomer degradation. △ Less

Submitted 17 March, 2020; originally announced March 2020.

New Technologies for Discovery

Authors: Z. Ahmed, A. Apresyan, M. Artuso, P. Barry, E. Bielejec, F. Blaszczyk, T. Bose, D. Braga, S. A. Charlebois, A. Chatterjee, A. Chavarria, H. -M. Cho, S. Dalla Torre, M. Demarteau, D. Denisov, M. Diefenthaler, A. Dragone, F. Fahim, C. Gee, S. Habib, G. Haller, J. Hogan, B. J. P. Jones, M. Garcia-Sciveres, G. Giacomini , et al. (58 additional authors not shown)

Abstract: For the field of high energy physics to continue to have a bright future, priority within the field must be given to investments in the development of both evolutionary and transformational detector development that is coordinated across the national laboratories and with the university community, international partners and other disciplines. While the fundamental science questions addressed by hi… ▽ More For the field of high energy physics to continue to have a bright future, priority within the field must be given to investments in the development of both evolutionary and transformational detector development that is coordinated across the national laboratories and with the university community, international partners and other disciplines. While the fundamental science questions addressed by high energy physics have never been more compelling, there is acute awareness of the challenging budgetary and technical constraints when scaling current technologies. Furthermore, many technologies are reaching their sensitivity limit and new approaches need to be developed to overcome the currently irreducible technological challenges. This situation is unfolding against a backdrop of declining funding for instrumentation, both at the national laboratories and in particular at the universities. This trend has to be reversed for the country to continue to play a leadership role in particle physics, especially in this most promising era of imminent new discoveries that could finally break the hugely successful, but limited, Standard Model of fundamental particle interactions. In this challenging environment it is essential that the community invest anew in instrumentation and optimize the use of the available resources to develop new innovative, cost-effective instrumentation, as this is our best hope to successfully accomplish the mission of high energy physics. This report summarizes the current status of instrumentation for high energy physics, the challenges and needs of future experiments and indicates high priority research areas. △ Less

Submitted 10 August, 2019; v1 submitted 31 July, 2019; originally announced August 2019.

Comments: A report of the 2018 DPF Coordinating Panel for Advanced Detectors (CPAD) Community Workshop (101 pages)

The expectation of cosmic ray proton and helium energy spectrum below 4 PeV measured by LHAASO

Authors: L. Q. Yin, S. S. Zhang, Z. Cao, B. Y. Bi, C. Wang, J. L. Liu, L. L. Ma, M. J. Yang, Tiina Suomijarvi, Y. Zhang, Z. Y. You, Z. Z Zong

Abstract: Large High Altitude Air Shower Observatory(LHAASO) is a composite cosmic ray observatory consisting of three detector arrays: kilometer square array (KM2A) which includes the electromagnetic detector array and muon detector array, water Cherenkov detector array (WCDA) and wide field of view Cherenkov telescope array (WFCTA). One of the main scientific objectives of LHAASO is to precisely measure t… ▽ More Large High Altitude Air Shower Observatory(LHAASO) is a composite cosmic ray observatory consisting of three detector arrays: kilometer square array (KM2A) which includes the electromagnetic detector array and muon detector array, water Cherenkov detector array (WCDA) and wide field of view Cherenkov telescope array (WFCTA). One of the main scientific objectives of LHAASO is to precisely measure the cosmic rays energy spectrum of individual components from 1014 eV to 1018 eV. The hybrid observation will be employed by LHAASO experiment, in which the lateral and longitudinal distributions of the extensive air shower can be observed simultaneously. Thus many kinds of parameters can be used for primary nuclei identification. In this paper, high purity cosmic ray simulation samples of light nuclei component are obtained through Multi-Variable Analysis. The apertures of 1/4 LHAASO array for pure proton and mixed proton and helium (H&He) samples are 900 m2Sr and 1800 m2Sr respectively. A prospect of proton and H&He spectra from 100 TeV to 4 PeV is discussed. △ Less

Submitted 19 April, 2019; originally announced April 2019.

Comments: This article is to be published in Chinese Physics C. Manuscript ID CPC-2019-0093.R1

A method of detector and event visualization with Unity in JUNO

Authors: Jiang Zhu, Zhengyun You, Yumei Zhang, Ziyuan Li, Shu Zhang, Tao Lin, Weidong Li

Abstract: A visualization method based on Unity engine is proposed for the Jiangmen Underground Neutrino Observatory (JUNO) experiment. The method has been applied in development of a new event display tool named ELAINA (Event Live Animation with unIty for Neutrino Analysis), which provides an intuitive way for users to observe the detector geometry, to tune the reconstruction algorithm and to analyze the p… ▽ More A visualization method based on Unity engine is proposed for the Jiangmen Underground Neutrino Observatory (JUNO) experiment. The method has been applied in development of a new event display tool named ELAINA (Event Live Animation with unIty for Neutrino Analysis), which provides an intuitive way for users to observe the detector geometry, to tune the reconstruction algorithm and to analyze the physics events. In comparison with the traditional ROOT-based event display, ELAINA provides better visual effects with the Unity engine. It is developed independently of the JUNO offline software but shares the same detector description and event data model in JUNO offline with interfaces. Users can easily download and run the event display on their local computers with different operation systems. △ Less

Submitted 13 December, 2018; originally announced December 2018.

Comments: 15 pages, 8 figures

Mono-to-multilayer transition in growing bacterial colonies

Authors: Zhihong You, Daniel J. G. Pearce, Anupam Sengupta, Luca Giomi

Abstract: The transition from monolayers to multilayered structures in bacterial colonies is a fundamental step in biofilm development. Observed across different morphotypes and species, this transition is triggered within freely growing bacterial microcolonies comprising a few hundred cells. Using a combination of numerical simulations and analytical modeling, here we demonstrate that this transition origi… ▽ More The transition from monolayers to multilayered structures in bacterial colonies is a fundamental step in biofilm development. Observed across different morphotypes and species, this transition is triggered within freely growing bacterial microcolonies comprising a few hundred cells. Using a combination of numerical simulations and analytical modeling, here we demonstrate that this transition originates from the competition between growth-induced in-plane active stresses and vertical restoring forces, due to the cell-substrate interactions. Using a simple chainlike colony of laterally confined cells, we show that the transition sets when individual cells become unstable to rotations, thus it is localized and mechanically deterministic. Asynchronous cell division renders the process stochastic, so that all the critical parameters that control the onset of the transition are continuously distributed random variables. Here we demonstrate that the occurrence of the first division in the colony can be approximated as a Poisson process in the limit of large cells numbers. This allows us to approximately calculate the probability distribution function of the position and time associated with the first extrusion. The rate of such a Poisson process can be identified as the order parameter of the transition, thus highlighting its mixed deterministic-stochastic nature. △ Less

Submitted 13 March, 2021; v1 submitted 21 November, 2018; originally announced November 2018.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. Lett. 123, 178001 (2019)

Statistical Properties of Autonomous Flows in 2D Active Nematics

Authors: Linnea M Lemma, Stephen J Decamp, Zhihong You, Luca Giomi, Zvonimir Dogic

Abstract: We study the dynamics of a tunable 2D active nematic liquid crystal composed of microtubules and kinesin motors confined to an oil-water interface. Kinesin motors continuously inject mechanical energy into the system through ATP hydrolysis, powering the relative microscopic sliding of adjacent microtubules, which in turn generates macroscale autonomous flows and chaotic dynamics. We use particle i… ▽ More We study the dynamics of a tunable 2D active nematic liquid crystal composed of microtubules and kinesin motors confined to an oil-water interface. Kinesin motors continuously inject mechanical energy into the system through ATP hydrolysis, powering the relative microscopic sliding of adjacent microtubules, which in turn generates macroscale autonomous flows and chaotic dynamics. We use particle image velocimetry to quantify two-dimensional flows of active nematics and extract their statistical properties. In agreement with the hydrodynamic theory, we find that the vortex areas comprising the chaotic flows are exponentially distributed, which allows us to extract the characteristic system length scale. We probe the dependence of this length scale on the ATP concentration, which is the experimental knob that tunes the magnitude of the active stress. Our data suggest a possible map** between the ATP concentration and the active stress that is based on the Michaelis-Menten kinetics that governs motion of individual kinesin motors. △ Less

Submitted 8 September, 2019; v1 submitted 18 September, 2018; originally announced September 2018.

Comments: 17 pages, 7 figures

Journal ref: Soft Matter 15, 3264-3271 (2019)

Integrated Tempering Enhanced Sampling Method as the Infinite Switching Limit of Simulated Tempering

Authors: Zhiyi You, Liying Li, Jianfeng Lu, Hao Ge

Abstract: Fast and accurate sampling method is in high demand, in order to bridge the large gaps between molecular dynamic simulations and experimental observations. Recently, integrated tempering enhanced sampling method (ITS) has been proposed and successfully applied to various biophysical examples, significantly accelerating conformational sampling. The mathematical validation for its effectiveness has… ▽ More Fast and accurate sampling method is in high demand, in order to bridge the large gaps between molecular dynamic simulations and experimental observations. Recently, integrated tempering enhanced sampling method (ITS) has been proposed and successfully applied to various biophysical examples, significantly accelerating conformational sampling. The mathematical validation for its effectiveness has not been elucidated yet. Here we show that the integrated tempering enhanced sampling method can be viewed as a reformulation of the infinite switching limit of simulated tempering method over a mixed potential. Moreover, we demonstrate that the efficiency of simulated tempering molecular dynamics (STMD) improves as the frequency of switching between the temperatures is increased, based on the large deviation principle of empirical distributions. Our theory provides the theoretical justification of the advantage of ITS. Finally, we illustrate the utility of the infinite switching simulated tempering method through several numerical examples. △ Less

Submitted 20 June, 2018; v1 submitted 2 June, 2018; originally announced June 2018.

Comments: 9 pages, 3 figures

Event Display in the JUNO Experiment

Authors: Jiang Zhu, Zhengyun You, Yumei Zhang

Abstract: The current event display system in the offline software of Jiangmen Underground Neutrino Observatory Experiment(JUNO) is based on the ROOT EVE package. We use Unity, a renowned game engine, to improve its performance and make it available on different platforms. Compared to ROOT, Unity provides a more vivid demonstration for high energy physics experiments and can be ported to different platforms… ▽ More The current event display system in the offline software of Jiangmen Underground Neutrino Observatory Experiment(JUNO) is based on the ROOT EVE package. We use Unity, a renowned game engine, to improve its performance and make it available on different platforms. Compared to ROOT, Unity provides a more vivid demonstration for high energy physics experiments and can be ported to different platforms easily. We build a tool for event display in JUNO with Unity. It provides us an intuitive way to observe the detector model, the particle trajectories and the hit distributions. △ Less

Submitted 8 March, 2018; v1 submitted 3 March, 2018; originally announced March 2018.

Comments: 6 pages, 6 figures, proceeding of ACAT2017

A ROOT Based Event Display Software for JUNO

Authors: Zhengyun You, Kaijie Li, Yumei Zhang, Jiang Zhu, Tao Lin, Weidong Li

Abstract: An event display software SERENA has been designed for the Jiangmen Underground Neutrino Observatory (JUNO). The software has been developed in the JUNO offline software system and is based on the ROOT display package EVE. It provides an essential tool to display detector and event data for better understanding of the processes in the detectors. The software has been widely used in JUNO detector o… ▽ More An event display software SERENA has been designed for the Jiangmen Underground Neutrino Observatory (JUNO). The software has been developed in the JUNO offline software system and is based on the ROOT display package EVE. It provides an essential tool to display detector and event data for better understanding of the processes in the detectors. The software has been widely used in JUNO detector optimization, simulation, reconstruction and physics study. △ Less

Submitted 26 January, 2018; v1 submitted 20 December, 2017; originally announced December 2017.

Comments: 12 pages, 9 figures

Parallelized JUNO simulation software based on SNiPER

Authors: Tao Lin, Jiaheng Zou, Weidong Li, Ziyan Deng, Guofu Cao, Xingtao Huang, Zhengyun You

Abstract: The Jiangmen Underground Neutrino Observatory (JUNO) is a neutrino experiment to determine neutrino mass hierarchy. It has a central detector used for neutrino detection, which consists of a spherical acrylic vessel containing 20 kt LS and about 18,000 20-inch PMTs to collect light from LS. Around the CD, there is a water pool to shield radioactivities. The WP is equipped with about 2000 PMTs to m… ▽ More The Jiangmen Underground Neutrino Observatory (JUNO) is a neutrino experiment to determine neutrino mass hierarchy. It has a central detector used for neutrino detection, which consists of a spherical acrylic vessel containing 20 kt LS and about 18,000 20-inch PMTs to collect light from LS. Around the CD, there is a water pool to shield radioactivities. The WP is equipped with about 2000 PMTs to measure cosmic ray muons by detecting Cherenkov light. As one of the important parts in JUNO offline software, the serial simulation framework is developed based on SNiPER. It is in charge of physics generator, detector simulation, event mixing and digitization. However Geant4 based detector simulation of such a large detector is time-consuming and challenging. It is necessary to take full advantages of parallel computing to speedup simulation. Starting from version 10, Geant4 supports event-level parallelism. Even though based on pthread, it could be extended with other libraries such as Intel TBB. Therefore it is possible to parallelize JUNO simulation framework via integrating Geant4 and SNiPER. In this paper, our progress in develo** parallelized simulation software are presented. The SNiPER framework can run in sequential mode, Intel TBB mode or other modes. The SNiPER task component is in charge of event loop, which is like a simplified application manager. Two types of tasks are introduced in the simulation framework, one is global task and another is worker task. The global task will run only once to initialize detector geometry and physics processes. The worker tasks will be spawned after global task is done. In each worker task, a Geant4 run manager is invoked to do the real simulation. Therefore the simulation framework and the underlying TBB have been decoupled. Finally, the software performance of parallelized JUNO simulation software is also presented. △ Less

Submitted 19 October, 2017; originally announced October 2017.

Comments: 6 pages, 6 figures, the 18th International Workshop on Advanced Computing and Analysis Techniques in Physics Research (ACAT 2017)