Showing 1–24 of 24 results for author: You, W

Relativistic ultrafast electron diffraction at high repetition rates

Authors: K. M. Siddiqui, D. B. Durham, F. Cropp, F. Ji, S. Paiagua, C. Ophus, N. C. Andresen, L. **, J. Wu, S. Wang, X. Zhang, W. You, M. Murnane, M. Centurion, X. Wang, D. S. Slaughter, R. A. Kaindl, P. Musumeci, A. M. Minor, D. Filippetto

Abstract: The ability to resolve the dynamics of matter on its native temporal and spatial scales constitutes a key challenge and convergent theme across chemistry, biology, and materials science. The last couple of decades have witnessed ultrafast electron diffraction (UED) emerge as one of the forefront techniques with the sensitivity to resolve atomic motions. Increasingly sophisticated UED instruments a… ▽ More The ability to resolve the dynamics of matter on its native temporal and spatial scales constitutes a key challenge and convergent theme across chemistry, biology, and materials science. The last couple of decades have witnessed ultrafast electron diffraction (UED) emerge as one of the forefront techniques with the sensitivity to resolve atomic motions. Increasingly sophisticated UED instruments are being developed that are aimed at increasing the beam brightness in order to observe structural signatures, but so far they have been limited to low average current beams. Here we present the technical design and capabilities of the HiRES (High Repetition Rate Electron Scattering) instrument, which blends relativistic electrons and high repetition rates to achieve orders of magnitude improvement in average beam current compared to the existing state-of-the-art UED instruments. The setup utilizes a novel electron source to deliver femtosecond duration electron pulses at up to MHz repetition rates for UED experiments. We provide example cases of diffraction measurements on solid-state and gas-phase samples, including both micro- and nanodiffraction modes, which showcase the potential of the instrument for novel UED experiments. △ Less

Submitted 7 June, 2023; originally announced June 2023.

Comments: 13 pages, 10 figures

Quantitative phase imaging of opaque specimens with flexible endoscopic microscopy

Authors: **gyi Wang, Wu You, Yuheng Jiao, Yanhong Zhu, Xiaojun Liu, Xiangqian Jiang, Chenfei Hu, Wenlong Lu

Abstract: The flexible endoscope is a minimally invasive tool in clinical settings, but most of them rely on exogenous staining for diagnosis to provide qualitative information. Here, we demonstrated a flexible endoscopic microscopy (FEM) with diffracted gradient light for quantitative phase imaging of unlabeled thick samples. Our instrument features a small form factor fiber bundle as the endoscope probe,… ▽ More The flexible endoscope is a minimally invasive tool in clinical settings, but most of them rely on exogenous staining for diagnosis to provide qualitative information. Here, we demonstrated a flexible endoscopic microscopy (FEM) with diffracted gradient light for quantitative phase imaging of unlabeled thick samples. Our instrument features a small form factor fiber bundle as the endoscope probe, cellular-level lateral and axial resolutions, and direct phase measurement via simple field modulation. By testing pathologic slices, thick opaque mammalian tissue ex vivo and wound healing in vivo, FEM identifies normal and tumor glandular structures, secreta, and tomographic skin layers. With the advantages of direct morphological and phase measurement, high resolution, and thin fiber tip, the label-free FEM could be an attractive tool for various clinical applications. △ Less

Submitted 26 August, 2023; v1 submitted 20 May, 2023; originally announced May 2023.

All-optical control of topological valley transport in graphene metasurfaces

Authors: Yupei Wang, Jian Wei You, Nicolae C. Panoiu

Abstract: We demonstrate that the influence of Kerr effect on valley-Hall topological transport in graphene metasurfaces can be used to implement an all-optical switch. In particular, by taking advantage of the large Kerr coefficient of graphene, the index of refraction of a topologically-protected graphene metasurface can be tuned via a pump beam, which results in an optically controllable frequency shift… ▽ More We demonstrate that the influence of Kerr effect on valley-Hall topological transport in graphene metasurfaces can be used to implement an all-optical switch. In particular, by taking advantage of the large Kerr coefficient of graphene, the index of refraction of a topologically-protected graphene metasurface can be tuned via a pump beam, which results in an optically controllable frequency shift of the photonic bands of the metasurface. This spectral variation can in turn be readily employed to control and switch the propagation of an optical signal in certain waveguide modes of the graphene metasurface. Importantly, our theoretical and computational analysis reveals that the threshold pump power needed to optically switch ON/OFF the signal is strongly dependent on the group velocity of the pump mode, especially when the device is operated in the slow-light regime. This study could open up new routes towards active photonic nanodevices whose underlying functionality stems from their topological characteristics. △ Less

Submitted 3 January, 2023; originally announced January 2023.

Comments: 7 pages, 6 figures

Topological metasurface: From passive toward active and beyond

Authors: Jian Wei You, Zhihao Lan, Qian Ma, Zhen Gao, Yihao Yang, Fei Gao, Meng Xiao, Tie Jun Cui

Abstract: Metasurfaces are subwavelength structured thin films consisting of arrays of units that allow the controls of polarization, phase and amplitude of light over a subwavelength thickness. The recent developments in topological photonics have greatly broadened the horizon in designing the metasurfaces for novel functional applications. In this review, we summarize recent progress in the research field… ▽ More Metasurfaces are subwavelength structured thin films consisting of arrays of units that allow the controls of polarization, phase and amplitude of light over a subwavelength thickness. The recent developments in topological photonics have greatly broadened the horizon in designing the metasurfaces for novel functional applications. In this review, we summarize recent progress in the research field of topological metasurfaces, firstly from the perspectives of passive and active in the classical regime, and then in the quantum regime. More specifically, we begin by examining the passive topological phenomena in two-dimensional photonic systems, including both time-reversal broken systems and time-reversal preserved systems. Subsequently, we move to discuss the cutting-edge studies of the active topological metasurfaces, including nonlinear topological metasurfaces and reconfigurable topological metasurfaces. After overviewing the topological metasurfaces in the classical regime, we show how the topological metasurfaces could provide a new platform for quantum information and quantum many-body physics. Finally, we conclude and describe some challenges and future directions of this fast-evolving field. △ Less

Submitted 29 December, 2022; v1 submitted 25 December, 2022; originally announced December 2022.

Large-area quantum-spin-Hall waveguide states in a three-layer topological photonic crystal heterostructure

Authors: Zhihao Lan, Menglin L. N. Chen, Jian Wei You, Wei E. I. Sha

Abstract: Topological photonic edge states are conventionally formed at the interface between two domains of topologically trivial and nontrivial photonic crystals. Recent works exploiting photonic quantum Hall and quantum valley Hall effects have shown that large-area topological waveguide states could be created in a three-layer topological heterostructure that consists of a finite-width domain featuring… ▽ More Topological photonic edge states are conventionally formed at the interface between two domains of topologically trivial and nontrivial photonic crystals. Recent works exploiting photonic quantum Hall and quantum valley Hall effects have shown that large-area topological waveguide states could be created in a three-layer topological heterostructure that consists of a finite-width domain featuring Dirac cone sandwiched between two domains of photonic crystals with opposite topological properties. In this work, we show that a new kind of large-area topological waveguide states could be created employing the photonic analogs of quantum spin Hall effect. Taking the well-used Wu-Hu model in topological photonics as an example, we show that sandwiching a finite-width domain of photonic crystals featuring double Dirac cone between two domains of expanded and shrunken unit cells could lead to the emergence of large-area topological helical waveguide states distributed uniformly in the middle domain. Importantly, we unveil a power-law scaling regarding to the size of the bandgap within which the large-area helical states reside as a function of the width of the middle domain, which implies that these large-area modes in principle could exist in the middle domain with arbitrary width. Moreover, pseudospin-momentum locking unidirectional propagations and robustness of these large-area waveguide modes against sharp bends are explicitly demonstrated. Our work enlarges the photonic systems and platforms that could be utilized for large-area-mode enabled topologically waveguiding. △ Less

Submitted 25 April, 2023; v1 submitted 17 October, 2022; originally announced October 2022.

Comments: close to published version

Journal ref: Phys. Rev. A 107, L041501 (2023)

$\mathcal{T}$-matrix method for computation of second-harmonic generation upon optical wave scattering from clusters of arbitrary particles

Authors: Ivan Sekulic, Jian Wei You, Nicolae C. Panoiu

Abstract: We derive the $\mathcal{T}$-matrix formalism tailored for the numerical analysis of second-harmonic (SH) generation from arbitrarily-shaped particles made of centrosymmetric optical materials. First, the transfer matrix of a single particle is computed \textit{via} the extended boundary condition method, in which the electromagnetic fields both at fundamental frequency and SH are expanded in vecto… ▽ More We derive the $\mathcal{T}$-matrix formalism tailored for the numerical analysis of second-harmonic (SH) generation from arbitrarily-shaped particles made of centrosymmetric optical materials. First, the transfer matrix of a single particle is computed \textit{via} the extended boundary condition method, in which the electromagnetic fields both at fundamental frequency and SH are expanded in vector spherical wave functions and the integral formulation is satisfied away from the surface of the scatterer. We allow for the accurate physical description of the SH sources by taking into account both local surface and nonlocal bulk polarization contributions to the nonlinear polarization density source responsible for the generation of the SH signal in a particle. This single-particle formalism is then extended to arbitrary distributions of particles by incorporating into the formalism linear and nonlinear electromagnetic wave scattering from the particles in the cluster. Importantly from a practical point of view, our method can be applied to particles of arbitrary shape made of optical materials characterized by general frequency-dispersion relations, so that it can describe the linear and nonlinear optical response of clusters of metallic, semiconductor, or polaritonic particles, as well as mixtures of such particles. The approach proposed here is faster and more memory-efficient than well-established numerical techniques, especially in the analysis of spheroidal particles, due to the favourable symmetries of spherical wave basis functions used in the wave scattering analysis. △ Less

Submitted 30 August, 2022; originally announced August 2022.

Comments: 19 pages, 12 figures

$T$-matrix method for calculation of second-harmonic generation in clusters of spherical particles

Authors: Ivan Sekulic, Jian Wei You, Nicolae C. Panoiu

Abstract: In this article, we present a $T$-matrix method for numerical computation of second-harmonic generation from clusters of arbitrarily distributed spherical particles made of centrosymmetric optical materials. The electromagnetic fields at the fundamental and second-harmonic (SH) frequencies are expanded in series of vector spherical wave functions, and the single sphere $T$-matrix entries are compu… ▽ More In this article, we present a $T$-matrix method for numerical computation of second-harmonic generation from clusters of arbitrarily distributed spherical particles made of centrosymmetric optical materials. The electromagnetic fields at the fundamental and second-harmonic (SH) frequencies are expanded in series of vector spherical wave functions, and the single sphere $T$-matrix entries are computed by imposing field boundary conditions at the surface of the particles. Different from previous approaches, we compute the SH fields by taking into account both local surface and nonlocal bulk polarization sources, which allows one to accurately describe the generation of SH in arbitrary clusters of spherical particles. Our numerical method can be used to efficiently analyze clusters of spherical particles made of various optical materials, including metallic, dielectric, semiconductor, and polaritonic materials. △ Less

Submitted 18 February, 2021; originally announced February 2021.

Comments: 14 pages, 11 figures

Reprogrammable plasmonic topological insulators with ultrafast control

Authors: Jian Wei You, Qian Ma, Zhihao Lan, Qiang Xiao, Nicolae C. Panoiu, Tie Jun Cui

Abstract: Topological photonics has revolutionized our understanding of light propagation, but most of current studies are focused on designing a static photonic structure. Develo** a dynamic photonic topological platform to switch multiple topological functionalities at ultrafast speed is still a great challenge. Here we demonstrate an ultrafast reprogrammable plasmonic topological insulator, where the t… ▽ More Topological photonics has revolutionized our understanding of light propagation, but most of current studies are focused on designing a static photonic structure. Develo** a dynamic photonic topological platform to switch multiple topological functionalities at ultrafast speed is still a great challenge. Here we demonstrate an ultrafast reprogrammable plasmonic topological insulator, where the topological propagation route can be dynamically steered at nanosecond-level switching time, namely more than 10^7 times faster than the current state-of-the-art. This orders-of-magnitude improvement is achieved by using ultrafast electronic switches in an innovative way to implement the programmability. Due to the flexible programmability, many existing photonic topological functionalities can be integrated into this agile topological platform. Our work brings the current studies of photonic topological insulators to a digital and intelligent era, which could boost the development of intelligent and ultrafast photoelectric devices with built-in topological protection. △ Less

Submitted 26 December, 2020; originally announced December 2020.

Generation and Focusing of Orbital Angular Momentum Based on Polarized Reflectarray at Microwave Frequency

Authors: Fengxia Li, Haiyan Chen, Yang Zhou, Jian Wei You, Nicolae C. Panoiu, Peiheng Zhou, Longjiang Deng

Abstract: A novel polarized reflectarray is designed, fabricated, and experimentally characterized to show its flexibility and efficiency to control wave generation and focusing of orbital angular momentum (OAM) vortices with desirable OAM modes in the microwave frequency regime. In order to rigorously study the generation and focusing of OAM, a versatile analytical theory is proposed to theoretically study… ▽ More A novel polarized reflectarray is designed, fabricated, and experimentally characterized to show its flexibility and efficiency to control wave generation and focusing of orbital angular momentum (OAM) vortices with desirable OAM modes in the microwave frequency regime. In order to rigorously study the generation and focusing of OAM, a versatile analytical theory is proposed to theoretically study the compensation phase of reflectarray. Two prototypes of microwave reflectarrays are fabricated and experimentally characterized at 12 GHz, one for generation and one for focusing of OAM-carrying beams. Compared with the OAM-generating reflectarray, the reflectarray for focusing OAM vortex can significantly reduce the beam diameter, and this can further improve the transmission efficiency of the OAM vortex beams. We also show that the numerical and experimental results agree very well. The proposed design method and reflectarrays may spur the development of new efficient approaches to generate and focus OAM vortex waves for applications to microwave wireless communications. △ Less

Submitted 25 November, 2020; originally announced December 2020.

Comments: 10 pages, 10 figures

Second-harmonic generation via double topological valley-Hall kink modes in all-dielectric photonic crystals

Authors: Zhihao Lan, Jian Wei You, Qun Ren, Wei E. I. Sha, Nicolae C. Panoiu

Abstract: Nonlinear topological photonics, which explores topics common to the fields of topological phases and nonlinear optics, is expected to open up a new paradigm in topological photonics. Here, we demonstrate second-harmonic generation (SHG) via nonlinear interaction of double topological valley-Hall kink modes in all-dielectric photonic crystals (PhCs). We first show that two topological frequency ba… ▽ More Nonlinear topological photonics, which explores topics common to the fields of topological phases and nonlinear optics, is expected to open up a new paradigm in topological photonics. Here, we demonstrate second-harmonic generation (SHG) via nonlinear interaction of double topological valley-Hall kink modes in all-dielectric photonic crystals (PhCs). We first show that two topological frequency bandgaps can be created around a pair of frequencies, $ω_0$ and $2ω_0$, by gap** out the corresponding Dirac points in two-dimensional honeycomb PhCs. Valley-Hall kink modes along a kink-type domain wall interface between two PhCs placed together in a mirror-symmetric manner are generated within the two frequency bandgaps. Importantly, through full-wave simulations and mode dispersion analysis, we demonstrate that tunable, bi-directional phase-matched SHG via nonlinear interaction of the valley-Hall kink modes inside the two bandgaps can be achieved. In particular, by using Stokes parameters associated to the magnetic part of the valley-Hall kink modes, we introduce a new concept, SHG directional dichroism, which is employed to characterize optical probes for sensing chiral molecules. Our work opens up new avenues towards topologically protected nonlinear frequency mixing and active photonic devices implemented in all-dielectric material platforms. △ Less

Submitted 7 April, 2021; v1 submitted 9 July, 2020; originally announced July 2020.

Comments: 6 pages, 5 figures

Journal ref: Phys. Rev. A 103, 041502 (2021)

Topological valley plasmon transport in bilayer graphene metasurfaces for sensing applications

Authors: Yupei Wang, Jian Wei You, Zhihao Lan, Nicolae C. Panoiu

Abstract: Topologically protected plasmonic modes located inside topological bandgaps are attracting increasing attention, chiefly due to their robustness against disorder-induced backscattering. Here, we introduce a bilayer graphene metasurface that possesses plasmonic topological valley interface modes when the mirror symmetry of the metasurface is broken by horizontally shifting the lattice of holes of t… ▽ More Topologically protected plasmonic modes located inside topological bandgaps are attracting increasing attention, chiefly due to their robustness against disorder-induced backscattering. Here, we introduce a bilayer graphene metasurface that possesses plasmonic topological valley interface modes when the mirror symmetry of the metasurface is broken by horizontally shifting the lattice of holes of the top layer of the two freestanding graphene layers in opposite directions. In this configuration, light propagation along the domain-wall interface of the bilayer graphene metasurface shows unidirectional features. Moreover, we have designed a molecular sensor based on the topological properties of this metasurface using the fact that the Fermi energy of graphene varies upon chemical do**. This effect induces strong variation of the transmission of the topological guided modes, which can be employed as the underlying working principle of gas sensing devices. Our work opens up new ways of develo** robust integrated plasmonic devices for molecular sensing. △ Less

Submitted 28 May, 2020; originally announced May 2020.

Comments: 4 pages, 5 figures

Journal ref: Opt. Lett. 45, 3151-3154 (2020)

Tunable and Dual-broadband Giant Enhancement of SHG and THG in a Highly-engineered Graphene-Insulator-Graphene Metasurface

Authors: Jian Wei You, Nicolae C. Panoiu

Abstract: We demonstrate a novel scheme to dramatically enhance both the second- and third-harmonic generation in a graphene-insulator-graphene metasurface. The key underlying feature of our approach is the existence of a double-resonance phenomenon, namely the metasurface is designed to possess fundamental plasmon resonances at both the fundamental frequency and the higher harmonic. In particular, this dua… ▽ More We demonstrate a novel scheme to dramatically enhance both the second- and third-harmonic generation in a graphene-insulator-graphene metasurface. The key underlying feature of our approach is the existence of a double-resonance phenomenon, namely the metasurface is designed to possess fundamental plasmon resonances at both the fundamental frequency and the higher harmonic. In particular, this dual resonant field enhancement at the two optical frequencies, combined with a favorable spatial overlap of the optical near-fields, lead to the increase of the generated higher harmonic by several orders of magnitude. Remarkably, we demonstrate that by tuning the Fermi energy of the graphene gratings the dual-resonance property can be locked-in over a broad spectral range of ~20 THz, and equally important, the enhanced nonlinear frequency generation process can be readily switched in the same device between the second and third harmonic. This new type of graphene metasurface could open up new avenues towards the development of novel ultra-compact and multi-frequency active photonic nanodevices. △ Less

Submitted 11 May, 2020; originally announced May 2020.

Comments: 6 pages, 5 figures

Journal ref: Phys. Rev. B 102, 121403 (2020)

Valley-Hall topological plasmons in a graphene nanohole plasmonic crystal waveguide

Authors: J. W. You, Z. Lan, Q. Bao, N. C. Panoiu

Abstract: We demonstrate that unidirectional and backscattering immune propagation of terahertz optical waves can be achieved in a topological valley-Hall waveguide made of graphene nanohole plasmonic crystals. In order to gain deeper physical insights into these phenomena, the band diagram of graphene nanohole plamsonic crystals has been investigated and optimized. We found that a graphene plasmonic crysta… ▽ More We demonstrate that unidirectional and backscattering immune propagation of terahertz optical waves can be achieved in a topological valley-Hall waveguide made of graphene nanohole plasmonic crystals. In order to gain deeper physical insights into these phenomena, the band diagram of graphene nanohole plamsonic crystals has been investigated and optimized. We found that a graphene plasmonic crystal with nanohole arrays belonging to the $C_{6v}$ symmetry group possesses gapless Dirac cones, which can be gapped out by introducing extra nanoholes such that the symmetry point group of the system is reduced from $C_{6v}$ to $C_{3v}$. Taking advantage of this feature, we design a mirror symmetric domain-wall interface by placing together two optimized graphene plasmonic crystals so as to construct valley-polarized topological interface modes inside the opened bandgap. Our computational analysis shows that the valley-Hall topological domain-wall interface modes can be achieved at an extremely deep subwavelength scale, and do not rely on the application of external static magnetic fields. This work may pave a new way to develop highly-integrated and robust terahertz plasmonic waveguides at deep-subwavelength scale. △ Less

Submitted 5 April, 2020; originally announced April 2020.

Comments: 7 pages, 7 figures

Journal ref: IEEE J. Sel. Top. Quantum Electron. 26, 4600308 (2020)

Comparison between the linear and nonlinear homogenization of graphene and silicon

Authors: Qun Ren, J. W. You, N. C. Panoiu

Abstract: In this paper, we use a versatile homogenization approach to model the linear and nonlinear optical response of two metasurfaces: a plasmonic metasurface consisting of a square array of graphene cruciform patches and a dielectric metasurface consisting of a rectangular array of photonic crystal (PhC) cavities in a silicon PhC slab waveguide. The former metasurface is resonant at wavelengths that a… ▽ More In this paper, we use a versatile homogenization approach to model the linear and nonlinear optical response of two metasurfaces: a plasmonic metasurface consisting of a square array of graphene cruciform patches and a dielectric metasurface consisting of a rectangular array of photonic crystal (PhC) cavities in a silicon PhC slab waveguide. The former metasurface is resonant at wavelengths that are much larger than the graphene elements of the metasurface, whereas the resonance wavelengths of the latter one are comparable to the size of its resonant components. By computing and comparing the effective permittivities and nonlinear susceptibilities of the two metasurfaces, we infer some general principles regarding the conditions under which homogenization methods of metallic and dielectric metasurfaces are valid. In particular, we show that in the case of the graphene metasurface the homogenization method describes very well both its linear and nonlinear optical properties, whereas in the case of the silicon PhC metasurface the homogenization method is less accurate, especially near the optical resonances △ Less

Submitted 23 November, 2019; originally announced November 2019.

Collective resonance in helical superstructures of gold nanorods

Authors: Xuxing Lu, Weixiang Ye, Wenlong You, Hao Xie, Zhihong Hang, Yun Lai, Weihai Ni

Abstract: Chiroptical responses of helical superstructures are determined by collective behaviors of the individual building blocks. In this paper, we present a full theoretical description of the collective resonance in superstructures. We use the gold nanorods as individual building blocks and arrange them helically along an axis in an end-to-end fashion. Numerical simulations on single-unit cells reveal… ▽ More Chiroptical responses of helical superstructures are determined by collective behaviors of the individual building blocks. In this paper, we present a full theoretical description of the collective resonance in superstructures. We use the gold nanorods as individual building blocks and arrange them helically along an axis in an end-to-end fashion. Numerical simulations on single-unit cells reveal that the plasmonic coupling between the nanorods produces hybridized resonances, whose intensity is strongly dependent on the excitation light with left- or right-handed circular polarizations (LCP or RCP). A node-mode criterion is proposed on the basis of the microscopic mechanism, which successfully explains the difference between LCP and RCP. We further demonstrate, by repeating the unit cell from 1 to infinity along the helical axis, the multiple hybridized resonances gradually evolve and merge into a single collective resonance, whose energy is also dependent on LCP and RCP. An analytical description is provided for the collective resonance of the helical superstructure on the basis of the coupled dipole approximation method. Our theory shows that n collective resonance modes are present in the helical superstructure with the unit cell consisting of $n$ nanorods. Strikingly, only one resonance can be excited by the incident light with certain circular polarization. We propose a universal selection rule for such selective excitation of the collective resonances by analyzing the symmetry of the helical superstructures. The new insights provided in this work may shed light on future designs and fabrications of helical superstructures using plasmonic building blocks. △ Less

Submitted 27 February, 2020; v1 submitted 14 November, 2019; originally announced November 2019.

Comments: 11 pages, 8 figures

Journal ref: Phys. Rev. B 101, 045431 (2020)

Extensive beam test study of prototype MRPCs for the T0 detector at the CSR external-target experiment

Authors: Dongdong Hu, Jiaming Lu, Jian Zhou, Peipei Deng, Ming Shao, Yongjie Sun, Lei Zhao, Hongfang Chen, Cheng Li, Zebo Tang, Yifei Zhang, Yi Zhou, Wenhao You, Guofeng Song, Yitao Wu

Abstract: The CSR External-target Experiment (CEE) will be the first large-scale nuclear physics experiment device at the Cooling Storage Ring (CSR) of the Heavy-Ion Research Facility in Lanzhou (HIRFL) in China. A new T0 detector has been proposed to measure the multiplicity, angular distribution and timing information of charged particles produced in heavy-ion collisions at the target region. Multi-gap re… ▽ More The CSR External-target Experiment (CEE) will be the first large-scale nuclear physics experiment device at the Cooling Storage Ring (CSR) of the Heavy-Ion Research Facility in Lanzhou (HIRFL) in China. A new T0 detector has been proposed to measure the multiplicity, angular distribution and timing information of charged particles produced in heavy-ion collisions at the target region. Multi-gap resistive plate chamber (MRPC) technology was chosen as part of the construction of the T0 detector, which provides precision event collision times (T0) and collision geometry information. The prototype was tested with hadron and heavy-ion beams to study its performance. By comparing the experimental results with a Monte Carlo simulation, the time resolution of the MRPCs are found to be $\sim$ 50 ps or better. The timing performance of the T0 detector, including both detector and readout electronics, we found to fulfil the requirements of the CEE. △ Less

Submitted 25 September, 2019; originally announced September 2019.

Comments: 12 pages, 36 figures

Four-wave Mixing of Topological Edge Plasmons in Graphene Metasurfaces

Authors: Jian Wei You, Zhihao Lan, Nicolae C. Panoiu

Abstract: We study topologically-protected four-wave mixing (FWM) interactions in a plasmonic metasurface consisting of a periodic array of nanoholes in a graphene sheet, which exhibits a wide topological bandgap at terahertz frequencies upon the breaking of time-reversal symmetry by a static magnetic field. We demonstrate that due to the significant nonlinearity enhancement and large lifetime of graphene p… ▽ More We study topologically-protected four-wave mixing (FWM) interactions in a plasmonic metasurface consisting of a periodic array of nanoholes in a graphene sheet, which exhibits a wide topological bandgap at terahertz frequencies upon the breaking of time-reversal symmetry by a static magnetic field. We demonstrate that due to the significant nonlinearity enhancement and large lifetime of graphene plasmons in specific configurations, a net gain of FWM interaction of plasmonic edge states within the topological bandgap can be achieved with pump power of less than 10 nW. In particular, we find that the effective waveguide nonlinearity coefficient is about 1.1x10^13 1/(Wm), i.e., more than ten orders of magnitude larger than that of commonly used, highly nonlinear silicon photonic nanowires. These findings could pave a new way for develo** ultra-low-power-consumption, highly-integrated and robust active photonic systems at deep-subwavelength scale for applications in quantum communications and information processing. △ Less

Submitted 15 August, 2019; originally announced August 2019.

Comments: 20 pages, 6 figures

Journal ref: Sci. Adv. 6, eaaz3910 (2020)

Nonlinear one-way edge-mode interactions for frequency mixing in topological photonic crystals

Authors: Zhihao Lan, Jian Wei You, Nicolae C. Panoiu

Abstract: Topological photonics aims to utilize topological photonic bands and corresponding edge modes to implement robust light manipulation, which can be readily achieved in the linear regime of light-matter interaction. Importantly, unlike solid state physics, the common test bed for new ideas in topological physics, topological photonics provide an ideal platform to study wave mixing and other nonlinea… ▽ More Topological photonics aims to utilize topological photonic bands and corresponding edge modes to implement robust light manipulation, which can be readily achieved in the linear regime of light-matter interaction. Importantly, unlike solid state physics, the common test bed for new ideas in topological physics, topological photonics provide an ideal platform to study wave mixing and other nonlinear interactions. These are well-known topics in classical nonlinear optics but largely unexplored in the context of topological photonics. Here, we investigate nonlinear interactions of one-way edge-modes in frequency mixing processes in topological photonic crystals. We present a detailed analysis of the band topology of two-dimensional photonic crystals with hexagonal symmetry and demonstrate that nonlinear optical processes, such as second- and third-harmonic generation can be conveniently implemented via one-way edge modes of this setup. Moreover, we demonstrate that more exotic phenomena, such as slow-light enhancement of nonlinear interactions and harmonic generation upon interaction of backward-propagating (left-handed) edge modes can also be realized. Our work opens up new avenues towards topology-protected frequency mixing processes in photonics. △ Less

Submitted 9 April, 2020; v1 submitted 30 June, 2019; originally announced July 2019.

Comments: 16 pages, 11 figures

Journal ref: Phys. Rev. B 101, 155422 (2020)

Large enhancement of the effective second-order nonlinearity in graphene metasurfaces

Authors: Qun Ren, J. W. You, N. C. Panoiu

Abstract: Using a powerful homogenization technique, one- and two-dimensional graphene metasurfaces are homogenized both at the fundamental frequency (FF) and second harmonic (SH). In both cases, there is excellent agreement between the predictions of the homogenization method and those based on rigorous numerical solutions of Maxwell equations. The homogenization technique is then employed to demonstrate t… ▽ More Using a powerful homogenization technique, one- and two-dimensional graphene metasurfaces are homogenized both at the fundamental frequency (FF) and second harmonic (SH). In both cases, there is excellent agreement between the predictions of the homogenization method and those based on rigorous numerical solutions of Maxwell equations. The homogenization technique is then employed to demonstrate that, owing to a double-resonant plasmon excitation mechanism that leads to strong, simultaneous field enhancement at the FF and SH, the effective second-order susceptibility of graphene metasurfaces can be enhanced by more than three orders of magnitude as compared to the intrinsic second-order susceptibility of a graphene sheet placed on the same substrate. In addition, we explore the implications of our results on the development of new active nanodevices that incorporate nanopatterned graphene structures. △ Less

Submitted 15 May, 2019; originally announced May 2019.

Comments: 11 pages, 12 figures

Journal ref: Phys. Rev. B 99, 205404 (2019)

Plasmon-induced nonlinearity enhancement and homogenization of graphene metasurfaces

Authors: Jian Wei You, Nicolae C. Panoiu

Abstract: We demonstrate that the effective third-order nonlinear susceptibility of a graphene sheet can be enhanced by more than two orders of magnitude by patterning it into a graphene metasurface. In addition, in order to gain deeper physical insights into this phenomenon, we introduce a novel homogenization method, which is subsequently used to characterize quantitatively this nonlinearity enhancement e… ▽ More We demonstrate that the effective third-order nonlinear susceptibility of a graphene sheet can be enhanced by more than two orders of magnitude by patterning it into a graphene metasurface. In addition, in order to gain deeper physical insights into this phenomenon, we introduce a novel homogenization method, which is subsequently used to characterize quantitatively this nonlinearity enhancement effect by calculating the effective linear and nonlinear susceptibility of graphene metasurfaces. The accuracy of the proposed homogenization method is demonstrated by comparing its predictions with those obtained from the Kramers-Kronig relations. This work may open up new opportunities to explore novel physics pertaining to nonlinear optical interactions in graphene metasurfaces. △ Less

Submitted 25 April, 2019; originally announced April 2019.

Comments: 5 pages, 5 figures

Journal ref: Opt. Lett. 44, 3030-3033 (2019)

Analysis of the interaction between classical and quantum plasmons via FDTD-TDDFT method

Authors: Jian Wei You, Nicolae C. Panoiu

Abstract: A powerful hybrid FDTD--TDDFT method is used to study the interaction between classical plasmons of a gold bowtie nanoantenna and quantum plasmons of graphene nanoflakes (GNFs) placed in the narrow gap of the nanoantenna. Due to the hot-spot plasmon of the bowtie nanoantenna, the local-field intensity in the gap increases significantly, so that the optical response of the GNF is dramatically enhan… ▽ More A powerful hybrid FDTD--TDDFT method is used to study the interaction between classical plasmons of a gold bowtie nanoantenna and quantum plasmons of graphene nanoflakes (GNFs) placed in the narrow gap of the nanoantenna. Due to the hot-spot plasmon of the bowtie nanoantenna, the local-field intensity in the gap increases significantly, so that the optical response of the GNF is dramatically enhanced. To study this interaction between classical and quantum plasmons, we decompose this multiscale and multiphysics system into two computational regions, a classical and a quantum one. In the quantum region, the quantum plasmons of the GNF are studied using the TDDFT method, whereas the FDTD method is used to investigate the classical plasmons of the bowtie nanoantenna. Our analysis shows that in this hybrid system the quantum plasmon response of a molecular-scale GNF can be enhanced by more than two orders of magnitude, when the frequencies of the quantum and classical plasmons are the same. This finding can be particularly useful for applications to molecular sensors and quantum optics. △ Less

Submitted 13 April, 2019; originally announced April 2019.

Comments: 8 pages, 7 figures

Journal ref: IEEE Journal on Multiscale and Multiphysics Computational Techniques 4, 111-118 (2019)

Computational Analysis of Dispersive and Nonlinear 2D Materials by Using a Novel GS-FDTD Method

Authors: Jian Wei You, Edward Threlfall, Dominic F. G. Gallagher, Nicolae C. Panoiu

Abstract: In this paper, we propose a novel numerical method for modeling nanostructures containing dispersive and nonlinear two-dimensional (2D) materials, by incorporating a nonlinear generalized source (GS) into the finite-difference time-domain (FDTD) method. Starting from the expressions of nonlinear currents characterizing nonlinear processes in 2D materials, such as second- and third-harmonic generat… ▽ More In this paper, we propose a novel numerical method for modeling nanostructures containing dispersive and nonlinear two-dimensional (2D) materials, by incorporating a nonlinear generalized source (GS) into the finite-difference time-domain (FDTD) method. Starting from the expressions of nonlinear currents characterizing nonlinear processes in 2D materials, such as second- and third-harmonic generation, we prove that the nonlinear response of such nanostructures can be rigorously determined using two linear simulations. In the first simulation, one computes the linear response of the system upon its excitation by a pulsed incoming wave, whereas in the second one the system is excited by a nonlinear generalized source, which is determined by the linear near-field calculated in the first linear simulation. This new method is particularly suitable for the analysis of dispersive and nonlinear 2D materials, such as graphene and transition-metal dichalcogenides, chiefly because, unlike the case of most alternative approaches, it does not require the thickness of the 2D material. In order to investigate the accuracy of the proposed GS-FDTD method and illustrate its versatility, the linear and nonlinear response of graphene gratings have been calculated and compared to results obtained using alternative methods. Importantly, the proposed GS-FDTD can be extended to 3D bulk nonlinearities, rendering it a powerful tool for the design and analysis of more complicated nanodevices. △ Less

Submitted 8 March, 2019; originally announced March 2019.

Comments: 11 pages, 6 figures

Journal ref: Journal of the Optical Society of America B 35, 2754-2763 (2018)

Quantum many-body simulation using monolayer exciton-polaritons in coupled-cavities

Authors: Hai-Xiao Wang, Alan Zhan, Ya-Dong Xu, Huan-Yang Chen, Wen-Long You, Arka Majumdar, Jian-Hua Jiang

Abstract: Quantum simulation is a promising approach to understand complex strongly correlated many-body systems using relatively simple and tractable systems. Photon-based quantum simulators have great advantages due to the possibility of direct measurements of multi-particle correlations and ease of simulating non-equilibrium physics. However, interparticle interaction in existing photonic systems is ofte… ▽ More Quantum simulation is a promising approach to understand complex strongly correlated many-body systems using relatively simple and tractable systems. Photon-based quantum simulators have great advantages due to the possibility of direct measurements of multi-particle correlations and ease of simulating non-equilibrium physics. However, interparticle interaction in existing photonic systems is often too weak limiting the potential of quantum simulation. Here we propose an approach to enhance the interparticle interaction using exciton-polaritons in MoS$_2$ monolayer quantum-dots embedded in 2D photonic crystal microcavities. Realistic calculation yields optimal repulsive interaction in the range of $1$-$10$~meV --- more than an order of magnitude greater than the state-of-art value. Such strong repulsive interaction is found to emerge neither in the photon-blockade regime for small quantum dot nor in the polariton-blockade regime for large quantum dot, but in the crossover between the two regimes with a moderate quantum-dot radius around 20~nm. The optimal repulsive interaction is found to be largest in MoS$_2$ among commonly used optoelectronic materials. Quantum simulation of strongly correlated many-body systems in a finite chain of coupled cavities and its experimental signature are studied via exact diagonalization of the many-body Hamiltonian. A method to simulate 1D superlattices for interacting exciton-polariton gases in serially coupled cavities is also proposed. Realistic considerations on experimental realizations reveal advantages of transition metal dichalcogenide monolayer quantum-dots over conventional semiconductor quantum-emitters. △ Less

Submitted 18 April, 2017; v1 submitted 8 March, 2016; originally announced March 2016.

Journal ref: J. Phys.: Condens. Matter 29, 445703 (2017)

A Large area GEM Detector Using an improved Self-stretch Technique

Authors: Wenhao You, Yi Zhou, Cheng Li, Hongfang Chen, Ming Shao, Yongjie Sun, Zebo Tang, Jianbei Liu

Abstract: A GEM detector with an effective area of 30*30 cm2 has been constructed using an improved self-stretch technique, which enables an easy and fast GEM assembling. The design and assembling of the detector is described. Results from tests of the detector with 8 keV X-rays on effective gain and energy resolution are presented. A GEM detector with an effective area of 30*30 cm2 has been constructed using an improved self-stretch technique, which enables an easy and fast GEM assembling. The design and assembling of the detector is described. Results from tests of the detector with 8 keV X-rays on effective gain and energy resolution are presented. △ Less

Submitted 8 May, 2014; originally announced May 2014.