-
System- and Sample-agnostic Isotropic 3D Microscopy by Weakly Physics-informed, Domain-shift-resistant Axial Deblurring
Authors:
Jiashu Han,
Kunzan Liu,
Keith B. Isaacson,
Kristina Monakhova,
Linda G. Griffith,
Sixian You
Abstract:
Three-dimensional (3D) subcellular imaging is essential for biomedical research, but the diffraction limit of optical microscopy compromises axial resolution, hindering accurate 3D structural analysis. This challenge is particularly pronounced in label-free imaging of thick, heterogeneous tissues, where assumptions about data distribution (e.g. sparsity, label-specific distribution, and lateral-ax…
▽ More
Three-dimensional (3D) subcellular imaging is essential for biomedical research, but the diffraction limit of optical microscopy compromises axial resolution, hindering accurate 3D structural analysis. This challenge is particularly pronounced in label-free imaging of thick, heterogeneous tissues, where assumptions about data distribution (e.g. sparsity, label-specific distribution, and lateral-axial similarity) and system priors (e.g. independent and identically distributed (i.i.d.) noise and linear shift-invariant (LSI) point-spread functions (PSFs)) are often invalid. Here, we introduce SSAI-3D, a weakly physics-informed, domain-shift-resistant framework for robust isotropic 3D imaging. SSAI-3D enables robust axial deblurring by generating a PSF-flexible, noise-resilient, sample-informed training dataset and sparsely fine-tuning a large pre-trained blind deblurring network. SSAI-3D was applied to label-free nonlinear imaging of living organoids, freshly excised human endometrium tissue, and mouse whisker pads, and further validated in publicly available ground-truth-paired experimental datasets of 3D heterogeneous biological tissues with unknown blurring and noise across different microscopy systems.
△ Less
Submitted 10 June, 2024;
originally announced June 2024.
-
Deep and Dynamic Metabolic and Structural Imaging in Living Tissues
Authors:
Kunzan Liu,
Honghao Cao,
Kasey Shashaty,
Li-Yu Yu,
Sarah Spitz,
Francesca Michela Pramotton,
Zhengpeng Wan,
Ellen L. Kan,
Erin N. Tevonian,
Manuel Levy,
Eva Lendaro,
Roger D. Kamm,
Linda G. Griffith,
Fan Wang,
Tong Qiu,
Sixian You
Abstract:
Label-free imaging through two-photon autofluorescence (2PAF) of NAD(P)H allows for non-destructive and high-resolution visualization of cellular activities in living systems. However, its application to thick tissues and organoids has been restricted by its limited penetration depth within 300 $μ$m, largely due to tissue scattering at the typical excitation wavelength (~750 nm) required for NAD(P…
▽ More
Label-free imaging through two-photon autofluorescence (2PAF) of NAD(P)H allows for non-destructive and high-resolution visualization of cellular activities in living systems. However, its application to thick tissues and organoids has been restricted by its limited penetration depth within 300 $μ$m, largely due to tissue scattering at the typical excitation wavelength (~750 nm) required for NAD(P)H. Here, we demonstrate that the imaging depth for NAD(P)H can be extended to over 700 $μ$m in living engineered human multicellular microtissues by adopting multimode fiber (MMF)-based low-repetition-rate high-peak-power three-photon (3P) excitation of NAD(P)H at 1100 nm. This is achieved by having over 0.5 MW peak power at the band of 1100$\pm$25 nm through adaptively modulating multimodal nonlinear pulse propagation with a compact fiber shaper. Moreover, the 8-fold increase in pulse energy at 1100 nm enables faster imaging of monocyte behaviors in the living multicellular models. These results represent a significant advance for deep and dynamic metabolic and structural imaging of intact living biosystems. The modular design (MMF with a slip-on fiber shaper) is anticipated to allow wide adoption of this methodology for demanding in vivo and in vitro imaging applications, including cancer research, autoimmune diseases, and tissue engineering.
△ Less
Submitted 18 April, 2024;
originally announced April 2024.
-
Learned, Uncertainty-driven Adaptive Acquisition for Photon-Efficient Multiphoton Microscopy
Authors:
Cassandra Tong Ye,
Jiashu Han,
Kunzan Liu,
Anastasios Angelopoulos,
Linda Griffith,
Kristina Monakhova,
Sixian You
Abstract:
Multiphoton microscopy (MPM) is a powerful imaging tool that has been a critical enabler for live tissue imaging. However, since most multiphoton microscopy platforms rely on point scanning, there is an inherent trade-off between acquisition time, field of view (FOV), phototoxicity, and image quality, often resulting in noisy measurements when fast, large FOV, and/or gentle imaging is needed. Deep…
▽ More
Multiphoton microscopy (MPM) is a powerful imaging tool that has been a critical enabler for live tissue imaging. However, since most multiphoton microscopy platforms rely on point scanning, there is an inherent trade-off between acquisition time, field of view (FOV), phototoxicity, and image quality, often resulting in noisy measurements when fast, large FOV, and/or gentle imaging is needed. Deep learning could be used to denoise multiphoton microscopy measurements, but these algorithms can be prone to hallucination, which can be disastrous for medical and scientific applications. We propose a method to simultaneously denoise and predict pixel-wise uncertainty for multiphoton imaging measurements, improving algorithm trustworthiness and providing statistical guarantees for the deep learning predictions. Furthermore, we propose to leverage this learned, pixel-wise uncertainty to drive an adaptive acquisition technique that rescans only the most uncertain regions of a sample. We demonstrate our method on experimental noisy MPM measurements of human endometrium tissues, showing that we can maintain fine features and outperform other denoising methods while predicting uncertainty at each pixel. Finally, with our adaptive acquisition technique, we demonstrate a 120X reduction in acquisition time and total light dose while successfully recovering fine features in the sample. We are the first to demonstrate distribution-free uncertainty quantification for a denoising task with real experimental data and the first to propose adaptive acquisition based on reconstruction uncertainty
△ Less
Submitted 24 October, 2023;
originally announced October 2023.
-
EventLFM: Event Camera integrated Fourier Light Field Microscopy for Ultrafast 3D imaging
Authors:
Ruipeng Guo,
Qianwan Yang,
Andrew S. Chang,
Guorong Hu,
Joseph Greene,
Christopher V. Gabel,
Sixian You,
Lei Tian
Abstract:
Ultrafast 3D imaging is indispensable for visualizing complex and dynamic biological processes. Conventional scanning-based techniques necessitate an inherent trade-off between acquisition speed and space-bandwidth product (SBP). Emerging single-shot 3D wide-field techniques offer a promising alternative but are bottlenecked by the synchronous readout constraints of conventional CMOS systems, thus…
▽ More
Ultrafast 3D imaging is indispensable for visualizing complex and dynamic biological processes. Conventional scanning-based techniques necessitate an inherent trade-off between acquisition speed and space-bandwidth product (SBP). Emerging single-shot 3D wide-field techniques offer a promising alternative but are bottlenecked by the synchronous readout constraints of conventional CMOS systems, thus restricting data throughput to maintain high SBP at limited frame rates. To address this, we introduce EventLFM, a straightforward and cost-effective system that overcomes these challenges by integrating an event camera with Fourier light field microscopy (LFM), a state-of-the-art single-shot 3D wide-field imaging technique. The event camera operates on a novel asynchronous readout architecture, thereby bypassing the frame rate limitations inherent to conventional CMOS systems. We further develop a simple and robust event-driven LFM reconstruction algorithm that can reliably reconstruct 3D dynamics from the unique spatiotemporal measurements captured by EventLFM. Experimental results demonstrate that EventLFM can robustly reconstruct fast-moving and rapidly blinking 3D fluorescent samples at kHz frame rates. Furthermore, we highlight EventLFM's capability for imaging of blinking neuronal signals in scattering mouse brain tissues and 3D tracking of GFP-labeled neurons in freely moving C. elegans. We believe that the combined ultrafast speed and large 3D SBP offered by EventLFM may open up new possibilities across many biomedical applications.
△ Less
Submitted 3 April, 2024; v1 submitted 1 October, 2023;
originally announced October 2023.
-
Spectral-temporal-spatial customization via modulating multimodal nonlinear pulse propagation
Authors:
Tong Qiu,
Honghao Cao,
Kunzan Liu,
Li-Yu Yu,
Manuel Levy,
Eva Lendaro,
Fan Wang,
Sixian You
Abstract:
Multimode fibers (MMFs) have recently reemerged as attractive avenues for nonlinear effects due to their high-dimensional spatiotemporal nonlinear dynamics and scalability for high power. High-brightness MMF sources with effective control of the nonlinear processes would offer new possibilities for a wide range of applications from high-power fiber lasers, to bioimaging and chemical sensing, and t…
▽ More
Multimode fibers (MMFs) have recently reemerged as attractive avenues for nonlinear effects due to their high-dimensional spatiotemporal nonlinear dynamics and scalability for high power. High-brightness MMF sources with effective control of the nonlinear processes would offer new possibilities for a wide range of applications from high-power fiber lasers, to bioimaging and chemical sensing, and to novel physics phenomena. Here we present a simple yet effective way of controlling nonlinear effects at high peak power levels: by leveraging not only the spatial but also the temporal degrees of freedom of the multimodal nonlinear pulse propagation in step-index MMFs using a programmable fiber shaper. This method represents the first method that enables modulation and optimization of multimodal nonlinear pulse propagation, achieving high tunability and broadband high peak power. Its potential as a nonlinear imaging source is further demonstrated by applying the MMF source to multiphoton microscopy, where widely tunable two-photon and three-photon imaging is achieved with adaptive optimization. These demonstrations highlight the effectiveness of directly modulating multimodal nonlinear pulse propagation to enhance the high-dimensional customization and optimize the high spectral brightness of MMF output. These advancements provide new possibilities for technology advances in nonlinear optics, bioimaging, spectroscopy, optical computing, and material processing.
△ Less
Submitted 5 December, 2023; v1 submitted 8 June, 2023;
originally announced June 2023.
-
STCF Conceptual Design Report: Volume 1 -- Physics & Detector
Authors:
M. Achasov,
X. C. Ai,
R. Aliberti,
L. P. An,
Q. An,
X. Z. Bai,
Y. Bai,
O. Bakina,
A. Barnyakov,
V. Blinov,
V. Bobrovnikov,
D. Bodrov,
A. Bogomyagkov,
A. Bondar,
I. Boyko,
Z. H. Bu,
F. M. Cai,
H. Cai,
J. J. Cao,
Q. H. Cao,
Z. Cao,
Q. Chang,
K. T. Chao,
D. Y. Chen,
H. Chen
, et al. (413 additional authors not shown)
Abstract:
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII,…
▽ More
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII, providing a unique platform for exploring the asymmetry of matter-antimatter (charge-parity violation), in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions, as well as searching for exotic hadrons and physics beyond the Standard Model. The STCF project in China is under development with an extensive R\&D program. This document presents the physics opportunities at the STCF, describes conceptual designs of the STCF detector system, and discusses future plans for detector R\&D and physics case studies.
△ Less
Submitted 5 October, 2023; v1 submitted 28 March, 2023;
originally announced March 2023.
-
Roadmap on Deep Learning for Microscopy
Authors:
Giovanni Volpe,
Carolina Wählby,
Lei Tian,
Michael Hecht,
Artur Yakimovich,
Kristina Monakhova,
Laura Waller,
Ivo F. Sbalzarini,
Christopher A. Metzler,
Mingyang Xie,
Kevin Zhang,
Isaac C. D. Lenton,
Halina Rubinsztein-Dunlop,
Daniel Brunner,
Bijie Bai,
Aydogan Ozcan,
Daniel Midtvedt,
Hao Wang,
Nataša Sladoje,
Joakim Lindblad,
Jason T. Smith,
Marien Ochoa,
Margarida Barroso,
Xavier Intes,
Tong Qiu
, et al. (50 additional authors not shown)
Abstract:
Through digital imaging, microscopy has evolved from primarily being a means for visual observation of life at the micro- and nano-scale, to a quantitative tool with ever-increasing resolution and throughput. Artificial intelligence, deep neural networks, and machine learning are all niche terms describing computational methods that have gained a pivotal role in microscopy-based research over the…
▽ More
Through digital imaging, microscopy has evolved from primarily being a means for visual observation of life at the micro- and nano-scale, to a quantitative tool with ever-increasing resolution and throughput. Artificial intelligence, deep neural networks, and machine learning are all niche terms describing computational methods that have gained a pivotal role in microscopy-based research over the past decade. This Roadmap is written collectively by prominent researchers and encompasses selected aspects of how machine learning is applied to microscopy image data, with the aim of gaining scientific knowledge by improved image quality, automated detection, segmentation, classification and tracking of objects, and efficient merging of information from multiple imaging modalities. We aim to give the reader an overview of the key developments and an understanding of possibilities and limitations of machine learning for microscopy. It will be of interest to a wide cross-disciplinary audience in the physical sciences and life sciences.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
High-Fidelity and High-Speed Wavefront Sha** by Leveraging Complex Media
Authors:
Li-Yu Yu,
Sixian You
Abstract:
Achieving high-precision light manipulation is crucial for delivering information through complex media with high fidelity. However, existing spatial light modulation devices face a fundamental tradeoff between speed and accuracy. Digital micromirror devices (DMDs) have emerged as a promising candidate as accessible high-speed wavefront sha** devices but at the cost of compromised fidelity, larg…
▽ More
Achieving high-precision light manipulation is crucial for delivering information through complex media with high fidelity. However, existing spatial light modulation devices face a fundamental tradeoff between speed and accuracy. Digital micromirror devices (DMDs) have emerged as a promising candidate as accessible high-speed wavefront sha** devices but at the cost of compromised fidelity, largely due to the limited control degrees of freedom and the challenge of numerically optimizing a binary amplitude mask. Here we leverage the sparse-to-random transformation through complex media to overcome the dimensionality limitation of spatial light modulation devices. We demonstrate that pattern compression in the form of sparsity-constrained wavefront optimization allows sparse and robust wavefront representations of generic patterns in the random basis provided by the complex media, and thus effectively addresses the dimensionality limitation of DMDs, which significantly improves the projection fidelity without sacrificing the full frame rate (22 kHz), hardware complexity, or optimization time (0.5 s for 1000 frames). Since the dimensionality limitation is intrinsic to spatial light modulation devices and sparse-to-random transformation to complex media, our methods can be generalized to different pattern types, complex media, and device settings, supporting consistent superior performance across different types of complex media with up to an 89% increase in projection accuracy and a 126% improvement in speckle suppression. The proposed optimization framework has the potential to enhance existing holographic setups without any change to the hardware, enable high-fidelity and high-speed wavefront sha** through different scattering media and platforms, and directly facilitate a wide range of physics and real-world applications.
△ Less
Submitted 19 September, 2023; v1 submitted 20 February, 2023;
originally announced February 2023.
-
Melting Domain Size and Recrystallization Dynamics of Ice Revealed by Time-Resolved X-ray Scattering
Authors:
Cheolhee Yang,
Marjorie Ladd-Parada,
Kyeongmin Nam,
Sangmin Jeong,
Seonju You,
Alexander Späh,
Harshad Pathak,
Tobias Eklund,
Thomas J. Lane,
Jae Hyuk Lee,
Intae Eom,
Minseok Kim,
Katrin Amann- Winkel,
Fivos Perakis,
Anders Nilsson,
Kyung Hwan Kim
Abstract:
The phase transition between water and ice is ubiquitous and one of the most important phenomena in nature. Here, we performed time-resolved x-ray scattering experiments capturing the melting and recrystallization dynamics of ice. The ultrafast heating of ice I is induced by an IR laser pulse and probed with an intense x-ray pulse, which provided us with direct structural information on different…
▽ More
The phase transition between water and ice is ubiquitous and one of the most important phenomena in nature. Here, we performed time-resolved x-ray scattering experiments capturing the melting and recrystallization dynamics of ice. The ultrafast heating of ice I is induced by an IR laser pulse and probed with an intense x-ray pulse, which provided us with direct structural information on different length scales. From the wide-angle x-ray scattering (WAXS) patterns, the molten fraction, as well as the corresponding temperature at each delay, were determined. The small-angle x-ray scattering (SAXS) patterns, together with the information extracted from the WAXS analysis, provided the time-dependent change of the size and the number of the liquid domains. The results show partial melting (~13 %) and superheating of ice occurring at around 20 ns. After 100 ns, the average size of the liquid domains grows from about 2.5 nm to 4.5 nm by the coalescence of approximately six adjacent domains. Subsequently, we capture the recrystallization of the liquid domains, which occurs on microsecond timescales due to the cooling by heat dissipation and results to a decrease of the average liquid domain size.
△ Less
Submitted 7 February, 2023;
originally announced February 2023.
-
Essential Number of Principal Components and Nearly Training-Free Model for Spectral Analysis
Authors:
Yifeng Bie,
Shuai You,
Xinrui Li,
Xuekui Zhang,
Tao Lu
Abstract:
Through a study of multi-gas mixture datasets, we show that in multi-component spectral analysis, the number of functional or non-functional principal components required to retain the essential information is the same as the number of independent constituents in the mixture set. Due to the mutual in-dependency among different gas molecules, near one-to-one projection from the principal component…
▽ More
Through a study of multi-gas mixture datasets, we show that in multi-component spectral analysis, the number of functional or non-functional principal components required to retain the essential information is the same as the number of independent constituents in the mixture set. Due to the mutual in-dependency among different gas molecules, near one-to-one projection from the principal component to the mixture constituent can be established, leading to a significant simplification of spectral quantification. Further, with the knowledge of the molar extinction coefficients of each constituent, a complete principal component set can be extracted from the coefficients directly, and few to none training samples are required for the learning model. Compared to other approaches, the proposed methods provide fast and accurate spectral quantification solutions with a small memory size needed.
△ Less
Submitted 30 December, 2022;
originally announced December 2022.
-
Study and characterization of GaN MOS capacitors: planar versus trench topographies
Authors:
K. Mukherjee,
C. De Santi,
S. You,
K. Geens,
M. Borga,
S. Decoutere,
B. Bakeroot,
P. Diehle,
F. Altmann,
G. Meneghesso,
E. Zanoni,
M. Meneghini
Abstract:
Develo** high quality GaN/dielectric interfaces is a fundamental step for manufacturing GaN vertical power transistors. In this paper, we quantitatively investigate the effect of planar etching treatment and trench formation on the performance of GaN-based MOS (metal oxide semiconductor) stacks. The results demonstrate that (i) blanket etching the GaN surface does not degrade the robustness of t…
▽ More
Develo** high quality GaN/dielectric interfaces is a fundamental step for manufacturing GaN vertical power transistors. In this paper, we quantitatively investigate the effect of planar etching treatment and trench formation on the performance of GaN-based MOS (metal oxide semiconductor) stacks. The results demonstrate that (i) blanket etching the GaN surface does not degrade the robustness of the deposited dielectric layer; (ii) the addition of the trench etch, while improving reproducibility, results in a decrease of breakdown performance compared to the planar structures. (iii) for the trench structures, the voltage for a 10 years lifetime is still above 20 V, indicating a good robustness. (iv) To review the trap** performance across the metal-dielectric-GaN stack, forward-reverse capacitance-voltage measurements with and without stress and photo-assistance are performed. Overall, as-grown planar capacitors devoid of prior etching steps show lowest trap**, while trench capacitors have higher interface trap**, and bulk trap** comparable to the blanket etched capacitors. (v) The nanostructure of the GaN/dielectric interface was characterized by high resolution scanning transmission electron microscopy (HR-STEM). An increased roughness of 2-3 monolayers at the GaN surface was observed after blanket etching, which was correlated to the higher density of interface traps. The results presented in this paper give fundamental insight on how the etch and trench processing affects the trap** and robustness of trench-gate GaN-MOSFETs, and provide guidance for the optimization of device performance.
△ Less
Submitted 21 July, 2022; v1 submitted 20 July, 2022;
originally announced July 2022.
-
Cavity locking with spatial modulation of optical phase front for laser stabilization
Authors:
Sheng Feng,
Songqing You,
Peng Yang,
Fenglei Zhang,
Yunlong Sun,
Boya Xie
Abstract:
We study optical cavity locking for laser stabilization through spatial modulation of the phase front of a light beam. A theoretical description of the underlying principle is developed for this method and special attention is paid to residual amplitude modulation (RAM) caused by experimental imperfections, especially the manufacture errors of the spatial phase modulator. The studied locking metho…
▽ More
We study optical cavity locking for laser stabilization through spatial modulation of the phase front of a light beam. A theoretical description of the underlying principle is developed for this method and special attention is paid to residual amplitude modulation (RAM) caused by experimental imperfections, especially the manufacture errors of the spatial phase modulator. The studied locking method owns the common advantages of the Pound-Drever-Hall method and the tilt-locking one, and it can provide a more artful way to eliminate RAM noise in phase modulation for the ultimate stability of lasers. In situations where cost and portability are a practical issue, the studied method allows one to realize compact laser stabilization systems locked to Fabry-P$\acute{\mbox{e}}$rot cavities without use of expensive bulky devices, such as signal generators and electro-optic modulators.
△ Less
Submitted 12 July, 2022;
originally announced July 2022.
-
Sensitivity improvement of Rydberg atom-based microwave sensing via electromagnetically induced transparency
Authors:
M. H. Cai,
Z. S. Xu,
S. H. You,
H. P. Liu
Abstract:
A highly excited Rydberg atom via electromagnetically induced transparency with two color cascading lasers has extreme sensitivity to electric fields of microwave ranging from 100 MHz to over 1 THz. It can be used as susceptible atom-based microwave communication antennas where the carrier wave usually works exactly resonant to the transition between a pair of adjacent Rydberg states with large el…
▽ More
A highly excited Rydberg atom via electromagnetically induced transparency with two color cascading lasers has extreme sensitivity to electric fields of microwave ranging from 100 MHz to over 1 THz. It can be used as susceptible atom-based microwave communication antennas where the carrier wave usually works exactly resonant to the transition between a pair of adjacent Rydberg states with large electric dipole moment. A technique of superheterodyne with a strong on-resonant local microwave oscillator is employed to induce considerable Autler-Townes splitting where the antennas has a highest dynamic response to another weak target signal microwave carrier. To further improve the sensitivity of atomic antenna in communication, we detune the carrier microwave frequency off resonance forming an asymmetrically optical splitting and fix the coupling laser frequency at the shoulder of the stronger one, and optimize the local field strength simultaneously. It gives a sensitivity of 12.50(04) $\rm{nVcm^{-1}\cdot Hz^{-1/2}}$. Its enhancement mechanism of sensitivity is also proved by a theoretical simulation.
△ Less
Submitted 12 November, 2021;
originally announced November 2021.
-
Vertical GaN Devices: Process and Reliability
Authors:
Shuzhen You,
Karen Geens,
Matteo Borga,
Hu Liang,
Herwig Hahn,
Dirk Fahle,
Michael Heuken,
Kalparupa Mukherjee,
Carlo De Santi,
Matteo Meneghini,
Enrico Zanoni,
Martin Berg,
Peter Ramvall,
Ashutosh Kumar,
Mikael T. Björk,
B. Jonas Ohlsson,
Stefaan Decoutere
Abstract:
This paper reviews recent progress and key challenges in process and reliability for high-performance vertical GaN transistors and diodes, focusing on the 200 mm CMOS-compatible technology. We particularly demonstrated the potential of using 200 mm diameter CTE matched substrates for vertical power transistors, and gate module optimizations for device robustness. An alternative technology path bas…
▽ More
This paper reviews recent progress and key challenges in process and reliability for high-performance vertical GaN transistors and diodes, focusing on the 200 mm CMOS-compatible technology. We particularly demonstrated the potential of using 200 mm diameter CTE matched substrates for vertical power transistors, and gate module optimizations for device robustness. An alternative technology path based on coalescence epitaxy of GaN-on-Silicon is also introduced, which could enable thick drift layers of very low dislocation density.
△ Less
Submitted 7 July, 2021; v1 submitted 6 July, 2021;
originally announced July 2021.
-
Exploration of Gate Trench Module for Vertical GaN devices
Authors:
M. Ruzzarin,
K. Geens,
M. Borga,
H. Liang,
S. You,
B. Bakeroot,
S. Decoutere,
C. De Santi,
A. Neviani,
M. Meneghini,
G. Meneghesso,
E. Zanoni
Abstract:
The aim of this work is to present the optimization of the gate trench module for use in vertical GaN devices in terms of cleaning process of the etched surface of the gate trench, thickness of gate dielectric and magnesium concentration of the p-GaN layer. The analysis was carried out by comparing the main DC parameters of devices that differ in surface cleaning process of the gate trench, gate d…
▽ More
The aim of this work is to present the optimization of the gate trench module for use in vertical GaN devices in terms of cleaning process of the etched surface of the gate trench, thickness of gate dielectric and magnesium concentration of the p-GaN layer. The analysis was carried out by comparing the main DC parameters of devices that differ in surface cleaning process of the gate trench, gate dielectric thickness, and body layer do**. . On the basis of experimental results, we report that: (i) a good cleaning process of the etched GaN surface of the gate trench is a key factor to enhance the device performance, (ii) a gate dielectric >35-nm SiO2 results in a narrow distribution for DC characteristics, (iii) lowering the p-do** in the body layer improves the ON-resistance (RON). Gate capacitance measurements are performed to further confirm the results. Hypotheses on dielectric trap**/detrap** mechanisms under positive and negative gate bias are reported.
△ Less
Submitted 6 April, 2021; v1 submitted 2 April, 2021;
originally announced April 2021.
-
Impact of High PV Penetration on Regional Power Grids
Authors:
Shutang You
Abstract:
Due to the high solar irradiance or energy price, certain regions in the U.S. may reach 100% PV penetration and experience degradation of frequency response greater than the interconnection as a whole. Therefore, in this section, the 100% PV penetration region in each interconnection is simulated to study the local high PV penetration effects. The study was performed by quantifying RoCoF, frequenc…
▽ More
Due to the high solar irradiance or energy price, certain regions in the U.S. may reach 100% PV penetration and experience degradation of frequency response greater than the interconnection as a whole. Therefore, in this section, the 100% PV penetration region in each interconnection is simulated to study the local high PV penetration effects. The study was performed by quantifying RoCoF, frequency nadir, and settling frequency at different regional PV penetration levels. The impact of high regional PV penetration on the compliance of grid code on frequency response is also studied.
△ Less
Submitted 6 April, 2021; v1 submitted 30 October, 2020;
originally announced November 2020.
-
Topological feature study of slope failure process via persistent homology-based machine learning
Authors:
Shengdong Zhang,
Shihui You,
Longfei Chen,
Xiaofei Liu
Abstract:
Using software UDEC to simulate the instability failure process of slope under seismic load, studing the dynamic response of slope failure, obtaining the deformation characteristics and displacement cloud map of slope, then analyzing the instability state of slope by using the theory of persistent homology, generates bar code map and extracts the topological characteristics of slope from bar code…
▽ More
Using software UDEC to simulate the instability failure process of slope under seismic load, studing the dynamic response of slope failure, obtaining the deformation characteristics and displacement cloud map of slope, then analyzing the instability state of slope by using the theory of persistent homology, generates bar code map and extracts the topological characteristics of slope from bar code map. The topological characteristics corresponding to the critical state of slope instability are found, and the relationship between topological characteristics and instability evolution is established. Finally, it provides a topological research tool for slope failure prediction. The results show that the change of the longest Betti 1 bar code reflects the evolution process of the slope and the law of instability failure. Using discrete element method and persistent homology theory to study the failure characteristics of slope under external load can better understand the failure mechanism of slope, provide theoretical basis for engineering protection, and also provide a new mathematical method for slope safety design and disaster prediction research.
△ Less
Submitted 29 September, 2020;
originally announced October 2020.
-
Sustained Coherence Characteristics of Failure Process of Shallow Buried Tunnel under Multiple Explosive Loads based on Persistent Homology
Authors:
Shengdong Zhang,
Shihui You,
Longfei Chen,
Xiaofei Liu
Abstract:
The damage characteristics of a shallow buried tunnel under multiple explosive loads is an important research issue in the design and evaluation of protective engineering. It is of great significance to develop a method for early warning of the safety of the shallow buried features. The discrete element method is used to establish a mechanical model of the shallow buried tunnel. The South Load Equ…
▽ More
The damage characteristics of a shallow buried tunnel under multiple explosive loads is an important research issue in the design and evaluation of protective engineering. It is of great significance to develop a method for early warning of the safety of the shallow buried features. The discrete element method is used to establish a mechanical model of the shallow buried tunnel. The South Load Equivalent Principle treats blast loads as a series of dynamic forces acting uniformly on the surface. Based on the discrete element method, the dynamic response after each blast load and the damage evolution process of the surrounding rock of the tunnel are obtained. The strength reduction method is used to obtain the surrounding rock of the tunnel. Introduce the theory of continuous homology, and use the mathematical method of continuous homology to quantitatively and qualitatively analyze the failure characteristics of the discrete element model under multiple explosive loads. The results show that the method of continuous homology can accurately reflect the topological characteristics of the surrounding rock of the tunnel The maximum one-dimensional bar code connection radius can effectively warn tunnel instability. This provides a new mathematical method for tunnel safety design and disaster prediction research.
△ Less
Submitted 29 September, 2020;
originally announced October 2020.
-
Slope plate of sticky soil granular slope instability based on complex network
Authors:
Shengdong Zhang,
Shihui You,
Longfei Chen,
Xiaofei Liu
Abstract:
The particle discrete element simulation of the instability and failure process of the granular slope accumulator model when the metal plate continues downward is obtained, and the two-dimensional total velocity vector of soil particle velocity and slope slip during the instability and failure of the slope accumulator are obtained. Macro-response processes such as removing the angle of the crack s…
▽ More
The particle discrete element simulation of the instability and failure process of the granular slope accumulator model when the metal plate continues downward is obtained, and the two-dimensional total velocity vector of soil particle velocity and slope slip during the instability and failure of the slope accumulator are obtained. Macro-response processes such as removing the angle of the crack surface and the average velocity in the y-direction of the slope top of the slope accumulation body. Construct a normal force chain undirected network model of the slope accumulation body particles under natural accumulation, and study the location of its slip surface, and The results are compared with the experimental results. Finally, the complex network method is used to analyze the topological characteristics of the contact force chain network of the particles on the slope top of the slope accumulation body, and the average degree, clustering coefficient and average shortest path are obtained during the slope instability of the slope accumulation body. The evolutionary rule of the method is used to verify its accuracy in combination with the strength reduction method. The research results show that the average shortest path can provide a more effective early warning of the instability and failure of slope deposits. A complex network theory is used to study the macro response of the slope deposits and its force chain. The interrelationship between the macroscopic structure of the network provides a new mathematical analysis method for the study of slope instability.
△ Less
Submitted 29 September, 2020;
originally announced October 2020.
-
Attosecond synchronization of extreme ultraviolet high harmonics from crystals
Authors:
Giulio Vampa,
Jian Lu,
Yong Sing You,
Denitsa R. Baykusheva,
Mengxi Wu,
Hanzhe Liu,
Kenneth J. Schafer,
Mette B. Gaarde,
David A. Reis,
Shambhu Ghimire
Abstract:
The interaction of strong near-infrared (NIR) laser pulses with wide-bandgap dielectrics produces high harmonics in the extreme ultraviolet (XUV) wavelength range. These observations have opened up the possibility of attosecond metrology in solids, which would benefit from a precise measurement of the emission times of individual harmonics with respect to the NIR laser field. Here we show that, wh…
▽ More
The interaction of strong near-infrared (NIR) laser pulses with wide-bandgap dielectrics produces high harmonics in the extreme ultraviolet (XUV) wavelength range. These observations have opened up the possibility of attosecond metrology in solids, which would benefit from a precise measurement of the emission times of individual harmonics with respect to the NIR laser field. Here we show that, when high-harmonics are detected from the input surface of a magnesium oxide crystal, a bichromatic probing of the XUV emission shows a clear synchronization largely consistent with a semiclassical model of electron-hole recollisions in bulk solids. On the other hand, the bichromatic spectrogram of harmonics originating from the exit surface of the 200 $μ$m-thick crystal is strongly modified, indicating the influence of laser field distortions during propagation. Our tracking of sub-cycle electron and hole re-collisions at XUV energies is relevant to the development of solid-state sources of attosecond pulses.
△ Less
Submitted 27 January, 2020;
originally announced January 2020.
-
Crystal orientation-dependent polarization state of high-order harmonics
Authors:
Yong Sing You,
Jian Lu,
Eric Cunningham,
Christian Roedel,
Shambhu Ghimire
Abstract:
We analyze the crystal orientation-dependent polarization state of extreme ultraviolet (XUV) high-order harmonics from bulk magnesium oxide crystals subjected to intense linearly polarized laser fields. We find that only along high-symmetry directions in crystals high-order harmonics follow the polarization direction of the laser field. In general, the polarization direction of high-order harmonic…
▽ More
We analyze the crystal orientation-dependent polarization state of extreme ultraviolet (XUV) high-order harmonics from bulk magnesium oxide crystals subjected to intense linearly polarized laser fields. We find that only along high-symmetry directions in crystals high-order harmonics follow the polarization direction of the laser field. In general, the polarization direction of high-order harmonics deviates from that of the laser field, and the deviation amplitude depends on the crystal orientation, harmonic order and the strength of the laser field. We use a real-space electron trajectory model to understand the crystal orientation-dependent polarization state of XUV harmonics. The polarization analysis allows us to track the motion of strong-field-driven electron in conduction bands in two dimensions. These results have implications in all-optical probing of atomic-scale structure in real-space, electronic band-structure in momentum space, and in the possibility of generating attosecond pulses with time-dependent polarization in a compact setup.
△ Less
Submitted 26 October, 2018;
originally announced October 2018.
-
Measurements of the Canonical Helicity of a Gyrating Kink
Authors:
Jens von der Linden,
Jason Sears,
Thomas Intrator,
Setthivoine You
Abstract:
Conversions between magnetic and kinetic energy occur over a range of plasma scales in astrophysical and solar dynamos and reconnection in the solar corona and the laboratory. Canonical flux tubes reconcile all plasma regimes with concepts of twists, writhes, and linkages. We present measurements of canonical flux tubes, their helicity, and their helicity transport in a gyrating plasma kink. The h…
▽ More
Conversions between magnetic and kinetic energy occur over a range of plasma scales in astrophysical and solar dynamos and reconnection in the solar corona and the laboratory. Canonical flux tubes reconcile all plasma regimes with concepts of twists, writhes, and linkages. We present measurements of canonical flux tubes, their helicity, and their helicity transport in a gyrating plasma kink. The helicity gauge is removed with general techniques valid even if only a limited section of the plasma is measured. Temporal asymmetries in the helicities confirm irreducible 3D fields in the kink.
△ Less
Submitted 18 July, 2018; v1 submitted 14 March, 2018;
originally announced March 2018.
-
The Mochi.LabJet experiment for measurements of canonical helicity injection in a laboratory astrophysical jet
Authors:
Setthivoine You,
Jens von der Linden,
Eric Sander Lavine,
Evan Grant Carroll,
Alexander Card,
Morgan Quinley,
Manuel Azuara-Rosales
Abstract:
The Mochi device is a new pulsed power plasma experiment designed to produce long, collimated, stable, magnetized plasma jets when set up in the LabJet configuration. The LabJet configuration aims to simulate an astrophysical jet in the laboratory by mimicking an accretion disk threaded by a poloidal magnetic field with concentric planar electrodes in front of a solenoidal coil. The unique setup c…
▽ More
The Mochi device is a new pulsed power plasma experiment designed to produce long, collimated, stable, magnetized plasma jets when set up in the LabJet configuration. The LabJet configuration aims to simulate an astrophysical jet in the laboratory by mimicking an accretion disk threaded by a poloidal magnetic field with concentric planar electrodes in front of a solenoidal coil. The unique setup consists of three electrodes, each with azimuthally symmetric gas slits. Two of the electrodes are biased independently with respect to the third electrode to control the radial electric field profile across the poloidal bias magnetic field. This design approximates a shear azimuthal rotation profile in an accretion disk. The azimuthally symmetric gas slits provide a continuously symmetric mass source at the footpoint of the plasma jet, so any azimuthal rotation of the plasma jet is not hindered by a discrete number of gas holes. The initial set of diagnostics consists of current Rogowski coils, voltage probes, magnetic field probe arrays, an interferometer and ion Doppler spectroscopy, supplemented by a fast ion gauge and a retarding grid energy analyzer. The measured parameters of the first plasmas are 1E22 m-3, 0.4 T, 5-25 eV, with velocities of 20-80 km/s. The combination of a controllable electric field profile, a flared poloidal magnetic field, and azimuthally symmetric mass sources in the experiment successfully produces short-lived (10 μs, >5 Alfvén times) collimated magnetic jets with ~10:1 aspect-ratio and long-lived (100 μs, >40 Alfvén times) flow-stabilized, collimated, magnetic jets with ~30:1 aspect-ratio.
△ Less
Submitted 28 March, 2018; v1 submitted 20 November, 2017;
originally announced November 2017.
-
High-harmonic generation in amorphous solids
Authors:
Yong Sing You,
Yanchun Yin,
Yi Wu,
Andrew Chew,
Xiaoming Ren,
Fengjiang Zhuang,
Shima Gholam-Mirzaei,
Michael Chini,
Zenghu Chang,
Shambhu Ghimire
Abstract:
High-order harmonic generation (HHG) in isolated atoms and molecules has been widely utilized in extreme ultraviolet (XUV) photonics and attosecond pulse metrology. Recently, HHG has also been observed in solids, which could lead to important applications such as all-optical methods to image valance charge density and reconstruction of electronic band structures, as well as compact XUV light sourc…
▽ More
High-order harmonic generation (HHG) in isolated atoms and molecules has been widely utilized in extreme ultraviolet (XUV) photonics and attosecond pulse metrology. Recently, HHG has also been observed in solids, which could lead to important applications such as all-optical methods to image valance charge density and reconstruction of electronic band structures, as well as compact XUV light sources. Previous HHG studies are confined on crystalline solids; therefore decoupling the respective roles of long-range periodicity and high density has been challenging. Here, we report the first observation of HHG from amorphous fused silica. We decouple the role of long-range periodicity by comparing with crystal quartz, which contains same atomic constituents but exhibits long-range periodicity. Our results advance current understanding of strong-field processes leading to high harmonic generation in solids with implications in robust and compact coherent XUV light sources.
△ Less
Submitted 22 May, 2017;
originally announced May 2017.
-
Sausage Instabilities on Top of Kinking Lengthening Current-Carrying Magnetic Flux Tubes
Authors:
Jens von der Linden,
Setthivoine You
Abstract:
We theoretically explore the possibility of sausage instabilities develo** on top of a kink instability in lengthening current-carrying magnetic flux tubes. Observations indicate that the dynamics of magnetic flux tubes in our cosmos and terrestrial experiments can involve topological changes faster than time scales predicted by resistive magnetohydrodynamics. Recent laboratory experiments sugge…
▽ More
We theoretically explore the possibility of sausage instabilities develo** on top of a kink instability in lengthening current-carrying magnetic flux tubes. Observations indicate that the dynamics of magnetic flux tubes in our cosmos and terrestrial experiments can involve topological changes faster than time scales predicted by resistive magnetohydrodynamics. Recent laboratory experiments suggest that hierarchies of instabilities, such as kink and Rayleigh-Taylor, could be responsible for initiating fast topological changes by locally accessing two fluid and kinetic regimes. Sausage instabilities can also provide this coupling mechanism between disparate scales. Flux tube experiments can be classified by the flux tube's evolution in a configuration space described by a normalized inverse aspect-ratio $\bar{k}$ and current-to-magnetic flux ratio $\barλ$. A lengthening current-carrying magnetic flux tube traverses this $\bar{k}$ - $\barλ$ space and crosses stability boundaries. We derive a single general criterion for the onset of the sausage and kink instabilities in idealized magnetic flux tubes with core and skin currents. The criterion indicates a dependence of the stability boundaries on current profiles and shows overlap** kink and sausage unstable regions in the $\bar{k}$ - $\barλ$ space with two free parameters. Numerical investigation of the stability criterion reduces the number of free parameters to a single one that describes the current profile, and confirms the overlap** sausage and kink unstable regions in $\bar{k}$ - $\barλ$ space. A lengthening, ideal current-carrying magnetic flux tube can therefore become sausage unstable after it becomes kink unstable.
△ Less
Submitted 22 June, 2018; v1 submitted 26 March, 2017;
originally announced March 2017.
-
The Topology of Canonical Flux Tubes in Flared Jet Geometry
Authors:
Eric Sander Lavine,
Setthivoine You
Abstract:
Magnetized plasma jets are generally modeled as magnetic flux tubes filled with flowing plasma governed by magnetohydrodynamics (MHD). We outline here a more fundamental approach based on flux tubes of canonical vorticity, where canonical vorticity is defined as the circulation of the species canonical momentum. This approach extends the concept of magnetic flux tube evolution to include the effec…
▽ More
Magnetized plasma jets are generally modeled as magnetic flux tubes filled with flowing plasma governed by magnetohydrodynamics (MHD). We outline here a more fundamental approach based on flux tubes of canonical vorticity, where canonical vorticity is defined as the circulation of the species canonical momentum. This approach extends the concept of magnetic flux tube evolution to include the effects of finite particle momentum and enables visualization of the topology of plasma jets in regimes beyond MHD. A flared, current-carrying magnetic flux tube in an ion-electron plasma with finite ion momentum is thus equivalent to either a pair of electron and ion flow flux tubes, a pair of electron and ion canonical momentum flux tubes, or a pair of electron and ion canonical vorticity flux tubes. We examine the morphology of all these flux tubes for increasing electrical currents, different radial current profiles, different electron Mach numbers, and a fixed, flared, axisymmetric magnetic geometry. Calculations of gauge-invariant relative canonical helicities track the evolution of magnetic, cross, and kinetic helicities in the system, and show that ion flow fields can unwind to compensate for an increasing magnetic twist. The results demonstrate that including a species finite momentum can result in a very long collimated canonical vorticity flux tube even if the magnetic flux tube is flared. With finite momentum, particle density gradients must be normal to canonical vorticities, not to magnetic fields, so observations of collimated astrophysical jets could be images of canonical vorticity flux tubes instead of magnetic flux tubes.
△ Less
Submitted 6 January, 2017;
originally announced January 2017.
-
arXiv:1607.00551
[pdf]
physics.plasm-ph
astro-ph.HE
astro-ph.SR
physics.flu-dyn
physics.space-ph
A field theory approach to the evolution of canonical helicity and energy
Authors:
Setthivoine You
Abstract:
A redefinition of the Lagrangian of a multi-particle system in fields reformulates the single-particle, kinetic, and fluid equations governing fluid and plasma dynamics as a single set of generalized Maxwell's equations and Ohm's law for canonical force-fields. The Lagrangian includes new terms representing the coupling between the motion of particle distributions, between distributions and electr…
▽ More
A redefinition of the Lagrangian of a multi-particle system in fields reformulates the single-particle, kinetic, and fluid equations governing fluid and plasma dynamics as a single set of generalized Maxwell's equations and Ohm's law for canonical force-fields. The Lagrangian includes new terms representing the coupling between the motion of particle distributions, between distributions and electromagnetic fields, with relativistic contributions. The formulation shows that the concepts of self-organization and canonical helicity transport are applicable across single-particle, kinetic, and fluid regimes, at classical and relativistic scales. The theory gives the basis for comparing canonical helicity change to energy change in general systems. For example, in a fixed, isolated system subject to non-conservative forces, a species' canonical helicity changes less than total energy only if gradients in density or distribution function are shallow.
△ Less
Submitted 2 July, 2016;
originally announced July 2016.
-
A two-fluid helicity transport model for flux-rope merging
Authors:
Setthivoine You
Abstract:
A two-fluid model for canonical helicity transport between merging flux-ropes is developed. Relative canonical helicity is defined here as the gauge invariant helicity of the canonical momentum of a given species, and represents the generalization of helicity to magnetized plasmas with non- negligible momentum. The model provides the conditions for when the transport of canonical helicity during m…
▽ More
A two-fluid model for canonical helicity transport between merging flux-ropes is developed. Relative canonical helicity is defined here as the gauge invariant helicity of the canonical momentum of a given species, and represents the generalization of helicity to magnetized plasmas with non- negligible momentum. The model provides the conditions for when the transport of canonical helicity during merging manifests itself as magnetic helicity transfer or as generation of strong helical plasma flows. The model is applied to compact torus merging but is also relevant to situations where magnetic flux-ropes and flow vorticity flux-ropes interact. Geometrical interpretations are given.
△ Less
Submitted 5 March, 2014;
originally announced March 2014.
-
The Transport of Relative Canonical Helicity
Authors:
Setthivoine You
Abstract:
The evolution of relative canonical helicity is examined in the two-fluid magnetohydrodynamic formalism. Canonical helicity is defined here as the helicity of the plasma species' canonical momentum. The species' canonical helicity are coupled together and can be converted from one into the other while the total gauge-invariant relative canonical helicity remains globally invariant. The conversion…
▽ More
The evolution of relative canonical helicity is examined in the two-fluid magnetohydrodynamic formalism. Canonical helicity is defined here as the helicity of the plasma species' canonical momentum. The species' canonical helicity are coupled together and can be converted from one into the other while the total gauge-invariant relative canonical helicity remains globally invariant. The conversion is driven by enthalpy differences at a surface common to ion and electron canonical flux tubes. The model provides an explanation for why the threshold for bifurcation in counter-helicity merging depends on the size parameter. The size parameter determines whether magnetic helicity annihilation channels enthalpy into the magnetic flux tube or into the vorticity flow tube components of the canonical flux tube. The transport of relative canonical helicity constrains the interaction between plasma flows and magnetic fields, and provides a more general framework for driving flows and currents from enthalpy or inductive boundary conditions.
△ Less
Submitted 7 September, 2012;
originally announced September 2012.
-
Dynamic and Stagnating Plasma Flow Leading to Magnetic Flux Tube Collimation
Authors:
Setthivoine You,
Paul M. Bellan,
Gunsu Yun
Abstract:
Highly collimated, plasma-filled magnetic flux tubes are frequently observed on galactic, stellar and laboratory scales. We propose that a single, universal magnetohydrodynamic pum** process explains why such collimated, plasma-filled magnetic flux tubes are ubiquitous. Experimental evidence from carefully diagnosed laboratory simulations of astrophysical jets confirms this assertion and is re…
▽ More
Highly collimated, plasma-filled magnetic flux tubes are frequently observed on galactic, stellar and laboratory scales. We propose that a single, universal magnetohydrodynamic pum** process explains why such collimated, plasma-filled magnetic flux tubes are ubiquitous. Experimental evidence from carefully diagnosed laboratory simulations of astrophysical jets confirms this assertion and is reported here. The magnetohydrodynamic process pumps plasma into a magnetic flux tube and the stagnation of the resulting flow causes this flux tube to become collimated.
△ Less
Submitted 29 June, 2005;
originally announced June 2005.