-
A Silicon Beam Tracker
Authors:
J. H. Han,
H. S. Ahn,
J. B. Bae,
H. J. Hyun,
S. W. Jung,
D. H. Kah,
C. H. Kim,
H. J. Kim,
K. C. Kim,
M. H. Lee,
L. Lutz,
A. Malinin,
H. Park,
S. Ryu,
E. S. Seo,
P. Walpole,
J. Wu,
J. H. Yoo,
Y. S. Yoon,
S. Y. Zinn
Abstract:
When testing and calibrating particle detectors in a test beam, accurate tracking information independent of the detector being tested is extremely useful during the offline analysis of the data. A general-purpose Silicon Beam Tracker (SBT) was constructed with an active area of 32.0 x 32.0 mm2 to provide this capability for the beam calibration of the Cosmic Ray Energetics And Mass (CREAM) calori…
▽ More
When testing and calibrating particle detectors in a test beam, accurate tracking information independent of the detector being tested is extremely useful during the offline analysis of the data. A general-purpose Silicon Beam Tracker (SBT) was constructed with an active area of 32.0 x 32.0 mm2 to provide this capability for the beam calibration of the Cosmic Ray Energetics And Mass (CREAM) calorimeter. The tracker consists of two modules, each comprised of two orthogonal layers of 380 μm thick silicon strip sensors. In one module each layer is a 64-channel AC-coupled single-sided silicon strip detector (SSD) with a 0.5 mm pitch. In the other, each layer is a 32-channel DC-coupled single-sided SSD with a 1.0 mm pitch. The signals from the 4 layers are read out using modified CREAM hodoscope front-end electronics with a USB 2.0 interface board to a Linux DAQ PC. In this paper, we present the construction of the SBT, along with its performance in radioactive source tests and in a CERN beam test in October 2006.
△ Less
Submitted 23 September, 2020;
originally announced September 2020.
-
Letter of Intent: Search for sub-millicharged particles at J-PARC
Authors:
Suyong Choi,
Jeong Hwa Kim,
Eunil Won,
Jae Hyeok Yoo,
Matthew Citron,
David Stuart,
Christopher S. Hill,
Andy Haas,
Jihad Sahili,
Haitham Zaraket,
A. De Roeck,
Martin Gastal
Abstract:
We propose a new experiment sensitive to the detection of millicharged particles produced at the $30$ GeV proton fixed-target collisions at J-PARC. The potential site for the experiment is B2 of the Neutrino Monitor building, $280$ m away from the target. With $\textrm{N}_\textrm{POT}=10^{22}$, the experiment can provide sensitivity to particles with electric charge $3\times10^{-4}\,e$ for mass le…
▽ More
We propose a new experiment sensitive to the detection of millicharged particles produced at the $30$ GeV proton fixed-target collisions at J-PARC. The potential site for the experiment is B2 of the Neutrino Monitor building, $280$ m away from the target. With $\textrm{N}_\textrm{POT}=10^{22}$, the experiment can provide sensitivity to particles with electric charge $3\times10^{-4}\,e$ for mass less than $0.2$ $\textrm{GeV}/\textrm{c}^2$ and $1.5\times10^{-3}\,e$ for mass less than $1.6$ $\textrm{GeV}/\textrm{c}^2$. This brings a substantial extension to the current constraints on the charge and the mass of such particles.
△ Less
Submitted 13 July, 2020;
originally announced July 2020.
-
The milliQan Experiment: Search for milli-charged Particles at the LHC
Authors:
Jae Hyeok Yoo
Abstract:
Recently, a search for milli-charged particles produced at the LHC has been proposed. The experiment, named milliQan, is expected to obtain sensitivity to charges of $10^{- 1} - 10^{-3}e$ for masses in the 0.1 - 100 GeV range. The detector is composed of 3 stacks of 80 cm long plastic scintillator arrays read out by PMTs. It will be installed in an existing tunnel 33 m from the CMS interaction poi…
▽ More
Recently, a search for milli-charged particles produced at the LHC has been proposed. The experiment, named milliQan, is expected to obtain sensitivity to charges of $10^{- 1} - 10^{-3}e$ for masses in the 0.1 - 100 GeV range. The detector is composed of 3 stacks of 80 cm long plastic scintillator arrays read out by PMTs. It will be installed in an existing tunnel 33 m from the CMS interaction point at the LHC, with 17 m of rock shielding to suppress beam backgrounds. In the fall of 2017 a 1% scale "demonstrator" of the proposed detector was installed at the planned site in order to study the feasibility of the experiment, focusing on understanding various background sources such as radioactivity of materials, PMT dark current, cosmic rays, and beam induced backgrounds. The data from the demonstrator provides a unique opportunity to understand the backgrounds and to optimize the design of the full detector.
△ Less
Submitted 15 October, 2018;
originally announced October 2018.
-
Shock-driven transition to turbulence: emergence of power-law scaling
Authors:
Dell Olmstead,
Patrick Wayne,
Dylan Simons,
Ignacio Trueba Monje,
Jason Hoon Yoo,
Sanjay Kumar,
C. Randall Truman,
Peter Vorobieff
Abstract:
We consider two cases of interaction between a planar shock and a cylindrical density interface. In the first case (planar normal shock), the axis of the gas cylinder is parallel to the shock front, and baroclinic vorticity deposited by the shock is predominantly two-dimensional (directed along the axis of the cylinder). In the second case, the cylinder is tilted, resulting in an oblique shock int…
▽ More
We consider two cases of interaction between a planar shock and a cylindrical density interface. In the first case (planar normal shock), the axis of the gas cylinder is parallel to the shock front, and baroclinic vorticity deposited by the shock is predominantly two-dimensional (directed along the axis of the cylinder). In the second case, the cylinder is tilted, resulting in an oblique shock interaction, and a fully three-dimensional shock-induced vorticity field. The statistical properties of the flow for both cases are analyzed based on images from two orthogonal visualization planes, using structure functions of the intensity maps of fluorescent tracer pre-mixed with the heavy gas. At later times, these structure functions exhibit power-law-like behavior over a considerable range of scales. Manifestation of this behavior is remarkably consistent in terms of dimensionless time defined based on Richtmyer's linear theory within the range of Mach numbers from 1.1 to 2.0 and the range of gas cylinder tilt angles with respect to the plane of the shock front (0 to 30 degrees).
△ Less
Submitted 30 December, 2016;
originally announced January 2017.
-
Planning the Future of U.S. Particle Physics (Snowmass 2013): Chapter 8: Instrumentation Frontier
Authors:
M. Demarteau,
R. Lipton,
H. Nicholson,
I. Shipsey,
D. Akerib,
A. Albayrak-Yetkin,
J. Alexander,
J. Anderson,
M. Artuso,
D. Asner,
R. Ball,
M. Battaglia,
C. Bebek,
J. Beene,
Y. Benhammou,
E. Bentefour,
M. Bergevin,
A. Bernstein,
B. Bilki,
E. Blucher,
G. Bolla,
D. Bortoletto,
N. Bowden,
G. Brooijmans,
K. Byrum
, et al. (189 additional authors not shown)
Abstract:
These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 8, on the Instrumentation Frontier, discusses the instrumentation needs of future experiments in the Energy, Intensity, and Cosmic Frontiers, promising new technologies for particle physics research, and iss…
▽ More
These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 8, on the Instrumentation Frontier, discusses the instrumentation needs of future experiments in the Energy, Intensity, and Cosmic Frontiers, promising new technologies for particle physics research, and issues of gathering resources for long-term research in this area.
△ Less
Submitted 23 January, 2014;
originally announced January 2014.