-
Development of Rotating Target with Ferrofluid Seal for ILC Electron-Driven Positron Source
Authors:
Tsunehiko Omori,
Kaoru Yokoya,
Junji Urakawa,
Tohru Takahashi,
Masao Kuriki,
Masakazu Washio,
Masaru Kuribayashi,
Masaaki Yamakata,
Chie Nakaishi
Abstract:
In the ILC electron-driven positron source, acceleration tubes are located immediately downstream of the positron generation target to capture the generated positrons, necessitating high vacuum for their operation. We designed a rotating target using a ferrofluid rotating vacuum seal that can stably maintain a vacuum of 10-6 Pa and a tangential velocity of 5 m/sec, which meets the requirements of…
▽ More
In the ILC electron-driven positron source, acceleration tubes are located immediately downstream of the positron generation target to capture the generated positrons, necessitating high vacuum for their operation. We designed a rotating target using a ferrofluid rotating vacuum seal that can stably maintain a vacuum of 10-6 Pa and a tangential velocity of 5 m/sec, which meets the requirements of the ILC positron source. We fabricated a full-scale prototype and confirmed the compatibility of rotation and stable vacuum maintenance. Various tests on the radiation resistance of the ferrofluid demonstrated its ability to withstand six years of radiation exposure in normal ILC operation without degradation and to continue exhibiting vacuum sealing performance. Radiation exposure tests on a small-scale target with a structure and material similar to the full-scale target confirmed its operability after two years of radiation exposure in normal ILC operation. The design, including thermal load, stress analysis, and cooling, led to the conclusion of an estimated lifespan of the target of over one year, based on comparison with the SLC target. These results demonstrate and establish the technology of positron generation targets in the ILC electron-driven positron source.
△ Less
Submitted 30 June, 2024;
originally announced July 2024.
-
The Development of Energy-Recovery Linacs
Authors:
Chris Adolphsen,
Kevin Andre,
Deepa Angal-Kalinin,
Michaela Arnold,
Kurt Aulenbacher,
Steve Benson,
Jan Bernauer,
Alex Bogacz,
Maarten Boonekamp,
Reinhard Brinkmann,
Max Bruker,
Oliver Brüning,
Camilla Curatolo,
Patxi Duthill,
Oliver Fischer,
Georg Hoffstaetter,
Bernhard Holzer,
Ben Hounsell,
Andrew Hutton,
Erk Jensen,
Walid Kaabi,
Dmitry Kayran,
Max Klein,
Jens Knobloch,
Geoff Krafft
, et al. (24 additional authors not shown)
Abstract:
Energy-recovery linacs (ERLs) have been emphasised by the recent (2020) update of the European Strategy for Particle Physics as one of the most promising technologies for the accelerator base of future high-energy physics. The current paper has been written as a base document to support and specify details of the recently published European roadmap for the development of energy-recovery linacs. Th…
▽ More
Energy-recovery linacs (ERLs) have been emphasised by the recent (2020) update of the European Strategy for Particle Physics as one of the most promising technologies for the accelerator base of future high-energy physics. The current paper has been written as a base document to support and specify details of the recently published European roadmap for the development of energy-recovery linacs. The paper summarises the previous achievements on ERLs and the status of the field and its basic technology items. The main possible future contributions and applications of ERLs to particle and nuclear physics as well as industrial developments are presented. The paper includes a vision for the further future, beyond 2030, as well as a comparative data base for the main existing and forthcoming ERL facilities. A series of continuous innovations, such as on intense electron sources or high-quality superconducting cavity technology, will massively contribute to the development of accelerator physics at large. Industrial applications are potentially revolutionary and may carry the development of ERLs much further, establishing another shining example of the impact of particle physics on society and its technical foundation with a special view on sustaining nature.
△ Less
Submitted 27 September, 2022; v1 submitted 5 July, 2022;
originally announced July 2022.
-
Positron Sources for Future High Energy Physics Colliders
Authors:
P. Musumeci,
C. Boffo,
S. S. Bulanov,
I. Chaikovska,
A. Faus Golfe,
S. Gessner,
J. Grames,
R. Hessami,
Y. Ivanyushenkov,
A. Lankford,
G. Loisch,
G. Moortgat-Pick,
S. Nagaitsev,
S. Riemann,
P. Sievers,
C. Tenholt,
K. Yokoya
Abstract:
An unprecedented positron average current is required to fit the luminosity demands of future $e^+e^-$ high energy physics colliders. In addition, in order to access precision-frontier physics, these machines require positron polarization to enable exploring the polarization dependence in many HEP processes cross sections, reducing backgrounds and extending the reach of chiral physics studies beyo…
▽ More
An unprecedented positron average current is required to fit the luminosity demands of future $e^+e^-$ high energy physics colliders. In addition, in order to access precision-frontier physics, these machines require positron polarization to enable exploring the polarization dependence in many HEP processes cross sections, reducing backgrounds and extending the reach of chiral physics studies beyond the standard model. The ILC has a mature plan for the polarized positron source based on conversion in a thin target of circularly polarized gammas generated by passing the main high energy e-beam in a long superconducting helical undulator. Compact colliders (CLIC, C3 and advanced accelerator-based concepts) adopt a simplified approach and currently do not plan to use polarized positrons in their baseline design, but could greatly benefit from the development of compact alternative solutions to polarized positron production. Increasing the positron current, the polarization purity and simplifying the engineering design are all opportunities where advances in accelerator technology have the potential to make a significant impact. This white-paper describes the current status of the field and provides R\&D short-term and long-term pathways for polarized positron sources.
△ Less
Submitted 27 April, 2022;
originally announced April 2022.
-
The International Linear Collider: Report to Snowmass 2021
Authors:
Alexander Aryshev,
Ties Behnke,
Mikael Berggren,
James Brau,
Nathaniel Craig,
Ayres Freitas,
Frank Gaede,
Spencer Gessner,
Stefania Gori,
Christophe Grojean,
Sven Heinemeyer,
Daniel Jeans,
Katja Kruger,
Benno List,
Jenny List,
Zhen Liu,
Shinichiro Michizono,
David W. Miller,
Ian Moult,
Hitoshi Murayama,
Tatsuya Nakada,
Emilio Nanni,
Mihoko Nojiri,
Hasan Padamsee,
Maxim Perelstein
, et al. (487 additional authors not shown)
Abstract:
The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This docu…
▽ More
The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This document brings the story of the ILC up to date, emphasizing its strong physics motivation, its readiness for construction, and the opportunity it presents to the US and the global particle physics community.
△ Less
Submitted 16 January, 2023; v1 submitted 14 March, 2022;
originally announced March 2022.
-
European Strategy for Particle Physics -- Accelerator R&D Roadmap
Authors:
C. Adolphsen,
D. Angal-Kalinin,
T. Arndt,
M. Arnold,
R. Assmann,
B. Auchmann,
K. Aulenbacher,
A. Ballarino,
B. Baudouy,
P. Baudrenghien,
M. Benedikt,
S. Bentvelsen,
A. Blondel,
A. Bogacz,
F. Bossi,
L. Bottura,
S. Bousson,
O. Brüning,
R. Brinkmann,
M. Bruker,
O. Brunner,
P. N. Burrows,
G. Burt,
S. Calatroni,
K. Cassou
, et al. (111 additional authors not shown)
Abstract:
The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified…
▽ More
The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified in the Strategy update. The R&D objectives include: improvement of the performance and cost-performance of magnet and radio-frequency acceleration systems; investigations of the potential of laser / plasma acceleration and energy-recovery linac techniques; and development of new concepts for muon beams and muon colliders. The goal of the roadmap is to document the collective view of the field on the next steps for the R&D programme, and to provide the evidence base to support subsequent decisions on prioritisation, resourcing and implementation.
△ Less
Submitted 30 March, 2022; v1 submitted 19 January, 2022;
originally announced January 2022.
-
Operation of ILC250 at the Z-pole
Authors:
Kaoru Yokoya,
Kiyoshi Kubo,
Toshiyuki Okugi
Abstract:
ILC (International Linear Collider) is under consideration as the next global project of particle physics. Its Technical Design Report, published in 2013, describes the accelerator for the center-of-mass energies above 200GeV. The operation of ILC at lower center-of-mass energies has not been studies intensively. This report discusses the operation of the ILC at a center-of-mass 91.2GeV and presen…
▽ More
ILC (International Linear Collider) is under consideration as the next global project of particle physics. Its Technical Design Report, published in 2013, describes the accelerator for the center-of-mass energies above 200GeV. The operation of ILC at lower center-of-mass energies has not been studies intensively. This report discusses the operation of the ILC at a center-of-mass 91.2GeV and presents a possible parameter set.
△ Less
Submitted 12 September, 2019; v1 submitted 22 August, 2019;
originally announced August 2019.
-
The International Linear Collider: A Global Project
Authors:
Philip Bambade,
Tim Barklow,
Ties Behnke,
Mikael Berggren,
James Brau,
Philip Burrows,
Dmitri Denisov,
Angeles Faus-Golfe,
Brian Foster,
Keisuke Fujii,
Juan Fuster,
Frank Gaede,
Paul Grannis,
Christophe Grojean,
Andrew Hutton,
Benno List,
Jenny List,
Shinichiro Michizono,
Akiya Miyamoto,
Olivier Napoly,
Michael Peskin,
Roman Poeschl,
Frank Simon,
Jan Strube,
Jun** Tian
, et al. (7 additional authors not shown)
Abstract:
The International Linear Collider (ILC) is now under consideration as the next global project in particle physics. In this report, we review of all aspects of the ILC program: the physics motivation, the accelerator design, the run plan, the proposed detectors, the experimental measurements on the Higgs boson, the top quark, the couplings of the W and Z bosons, and searches for new particles. We r…
▽ More
The International Linear Collider (ILC) is now under consideration as the next global project in particle physics. In this report, we review of all aspects of the ILC program: the physics motivation, the accelerator design, the run plan, the proposed detectors, the experimental measurements on the Higgs boson, the top quark, the couplings of the W and Z bosons, and searches for new particles. We review the important role that polarized beams play in the ILC program. The first stage of the ILC is planned to be a Higgs factory at 250 GeV in the centre of mass. Energy upgrades can naturally be implemented based on the concept of a linear collider. We discuss in detail the ILC program of Higgs boson measurements and the expected precision in the determination of Higgs couplings. We compare the ILC capabilities to those of the HL-LHC and to those of other proposed e+e- Higgs factories. We emphasize throughout that the readiness of the accelerator and the estimates of ILC performance are based on detailed simulations backed by extensive RandD and, for the accelerator technology, operational experience.
△ Less
Submitted 5 April, 2019; v1 submitted 4 March, 2019;
originally announced March 2019.
-
Beam halo study on ATF dam** ring
Authors:
Dou Wang,
Philip Bambade,
Kaoru Yokoya,
Takashi Naito,
Jie Gao
Abstract:
Halo distribution is a key topic for background study. This paper has developed an analytical method to give an estimation of ATF beam halo distribution. The equilibrium particle distribution of the beam tail in the ATF dam** ring is calculated analytically with different emittance and different vacuum degree. The analytical results agree the measurements very well. This is a general method whic…
▽ More
Halo distribution is a key topic for background study. This paper has developed an analytical method to give an estimation of ATF beam halo distribution. The equilibrium particle distribution of the beam tail in the ATF dam** ring is calculated analytically with different emittance and different vacuum degree. The analytical results agree the measurements very well. This is a general method which can be applied to any electron rings.
△ Less
Submitted 8 October, 2016;
originally announced October 2016.
-
ILC Operating Scenarios
Authors:
T. Barklow,
J. Brau,
K. Fujii,
J. Gao,
J. List,
N. Walker,
K. Yokoya
Abstract:
The ILC Technical Design Report documents the design for the construction of a linear collider which can be operated at energies up to 500 GeV. This report summarizes the outcome of a study of possible running scenarios, including a realistic estimate of the real time accumulation of integrated luminosity based on ramp-up and upgrade processes. The evolution of the physics outcomes is emphasized,…
▽ More
The ILC Technical Design Report documents the design for the construction of a linear collider which can be operated at energies up to 500 GeV. This report summarizes the outcome of a study of possible running scenarios, including a realistic estimate of the real time accumulation of integrated luminosity based on ramp-up and upgrade processes. The evolution of the physics outcomes is emphasized, including running initially at 500 GeV, then at 350 GeV and 250 GeV. The running scenarios have been chosen to optimize the Higgs precision measurements and top physics while searching for evidence for signals beyond the standard model, including dark matter. In addition to the certain precision physics on the Higgs and top that is the main focus of this study, there are scientific motivations that indicate the possibility for discoveries of new particles in the upcoming operations of the LHC or the early operation of the ILC. Follow-up studies of such discoveries could alter the plan for the centre-of-mass collision energy of the ILC and expand the scientific impact of the ILC physics program. It is envisioned that a decision on a possible energy upgrade would be taken near the end of the twenty year period considered in this report.
△ Less
Submitted 25 June, 2015;
originally announced June 2015.
-
Planning the Future of U.S. Particle Physics (Snowmass 2013): Chapter 6: Accelerator Capabilities
Authors:
W. A. Barletta,
M. Bai,
M. Battaglia,
O. Bruning,
J. Byrd,
R. Ent,
J. Flanagan,
W. Gai,
J. Galambos,
G. Hoffstaetter,
M. Hogan,
M. Klute,
S. Nagaitsev,
M. Palmer,
S. Prestemon,
T. Roser,
L. Rossi,
V. Shiltsev,
G. Varner,
K. Yokoya
Abstract:
These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 6, on Accelerator Capabilities, discusses the future progress of accelerator technology, including issues for high-energy hadron and lepton colliders, high-intensity beams, electron-ion colliders, and necess…
▽ More
These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 6, on Accelerator Capabilities, discusses the future progress of accelerator technology, including issues for high-energy hadron and lepton colliders, high-intensity beams, electron-ion colliders, and necessary R&D for future accelerator technologies.
△ Less
Submitted 23 January, 2014;
originally announced January 2014.
-
Analytical estimation of ATF beam halo distribution
Authors:
Dou Wang,
Philip Bambade,
Kaoru Yokoya,
Jie Gao
Abstract:
In order to study the background status in the ATF2 beam line and the interaction point (IP), this paper developed an analytical method to give the estimation of ATF beam halo distribution based on K. Hirata and K. Yokoya's theory. The equilibrium particle distribution of beam tail in ATF dam** ring, when each electron is being affected by, in addition to the synchrotron radiation dam** effect…
▽ More
In order to study the background status in the ATF2 beam line and the interaction point (IP), this paper developed an analytical method to give the estimation of ATF beam halo distribution based on K. Hirata and K. Yokoya's theory. The equilibrium particle distribution of beam tail in ATF dam** ring, when each electron is being affected by, in addition to the synchrotron radiation dam** effects, several stochastic processes, such as beam-gas scattring, beam-gas bremsstrahlung and intra-beam scattering, was presented. This method is common and can be applied on other electron rings.
△ Less
Submitted 8 October, 2016; v1 submitted 5 November, 2013;
originally announced November 2013.
-
The International Linear Collider Technical Design Report - Volume 3.I: Accelerator R&D in the Technical Design Phase
Authors:
Chris Adolphsen,
Maura Barone,
Barry Barish,
Karsten Buesser,
Philip Burrows,
John Carwardine,
Jeffrey Clark,
Hélène Mainaud Durand,
Gerry Dugan,
Eckhard Elsen,
Atsushi Enomoto,
Brian Foster,
Shigeki Fukuda,
Wei Gai,
Martin Gastal,
Rongli Geng,
Camille Ginsburg,
Susanna Guiducci,
Mike Harrison,
Hitoshi Hayano,
Keith Kershaw,
Kiyoshi Kubo,
Victor Kuchler,
Benno List,
Wanming Liu
, et al. (19 additional authors not shown)
Abstract:
The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the…
▽ More
The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the Z0 pole. A comprehensive value estimate of the accelerator is give, together with associated uncertainties. It is shown that no significant technical issues remain to be solved. Once a site is selected and the necessary site-dependent engineering is carried out, construction can begin immediately. The TDR also gives baseline documentation for two high-performance detectors that can share the ILC luminosity by being moved into and out of the beam line in a "push-pull" configuration. These detectors, ILD and SiD, are described in detail. They form the basis for a world-class experimental programme that promises to increase significantly our understanding of the fundamental processes that govern the evolution of the Universe.
△ Less
Submitted 26 June, 2013;
originally announced June 2013.
-
The International Linear Collider Technical Design Report - Volume 3.II: Accelerator Baseline Design
Authors:
Chris Adolphsen,
Maura Barone,
Barry Barish,
Karsten Buesser,
Philip Burrows,
John Carwardine,
Jeffrey Clark,
Hélène Mainaud Durand,
Gerry Dugan,
Eckhard Elsen,
Atsushi Enomoto,
Brian Foster,
Shigeki Fukuda,
Wei Gai,
Martin Gastal,
Rongli Geng,
Camille Ginsburg,
Susanna Guiducci,
Mike Harrison,
Hitoshi Hayano,
Keith Kershaw,
Kiyoshi Kubo,
Victor Kuchler,
Benno List,
Wanming Liu
, et al. (19 additional authors not shown)
Abstract:
The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the…
▽ More
The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the Z0 pole. A comprehensive value estimate of the accelerator is give, together with associated uncertainties. It is shown that no significant technical issues remain to be solved. Once a site is selected and the necessary site-dependent engineering is carried out, construction can begin immediately. The TDR also gives baseline documentation for two high-performance detectors that can share the ILC luminosity by being moved into and out of the beam line in a "push-pull" configuration. These detectors, ILD and SiD, are described in detail. They form the basis for a world-class experimental programme that promises to increase significantly our understanding of the fundamental processes that govern the evolution of the Universe.
△ Less
Submitted 26 June, 2013;
originally announced June 2013.
-
Report of the ICFA Beam Dynamics Workshop 'Accelerators for a Higgs Factory: Linear vs. Circular' (HF2012)
Authors:
Alain Blondel,
Alex Chao,
Weiren Chou,
Jie Gao,
Daniel Schulte,
Kaoru Yokoya
Abstract:
This paper is a summary report of the ICFA Beam Dynamics Workshop 'Accelerators for a Higgs Factory: Linear vs. Circular' (HF2012). It discusses four types of accelerators as possible candidates for a Higgs factory: linear e+e- colliders, circular e+e- colliders, muon collider and photon colliders. The comparison includes: physics reach, performance (energy and luminosity), upgrade potential, tech…
▽ More
This paper is a summary report of the ICFA Beam Dynamics Workshop 'Accelerators for a Higgs Factory: Linear vs. Circular' (HF2012). It discusses four types of accelerators as possible candidates for a Higgs factory: linear e+e- colliders, circular e+e- colliders, muon collider and photon colliders. The comparison includes: physics reach, performance (energy and luminosity), upgrade potential, technology maturity and readiness, and technical challenges requiring further R&D.
△ Less
Submitted 15 February, 2013; v1 submitted 14 February, 2013;
originally announced February 2013.
-
A High Luminosity e+e- Collider to study the Higgs Boson
Authors:
A. Blondel,
M. Koratzinos,
R. W. Assmann,
A. Butterworth,
P. Janot,
J. M. Jimenez,
C. Grojean,
A. Milanese,
M. Modena,
J. A. Osborne,
F. Zimmermann,
H. Piekarz,
K. Oide,
K. Yokoya,
J. Ellis,
M. Klute,
M. Zanetti,
M. Velasco,
V. Telnov,
L. Rivkin,
Y. Cai
Abstract:
A strong candidate for the Standard Model Scalar boson, H(126), has been discovered by the Large Hadron Collider (LHC) experiments. In order to study this fundamental particle with unprecedented precision, and to perform precision tests of the closure of the Standard Model, we investigate the possibilities offered by An e+e- storage ring collider. We use a design inspired by the B-factories, takin…
▽ More
A strong candidate for the Standard Model Scalar boson, H(126), has been discovered by the Large Hadron Collider (LHC) experiments. In order to study this fundamental particle with unprecedented precision, and to perform precision tests of the closure of the Standard Model, we investigate the possibilities offered by An e+e- storage ring collider. We use a design inspired by the B-factories, taking into account the performance achieved at LEP2, and imposing a synchrotron radiation power limit of 100 MW. At the most relevant centre-of-mass energy of 240 GeV, near-constant luminosities of 10^34 cm^{-2}s^{-1} are possible in up to four collision points for a ring of 27km circumference. The achievable luminosity increases with the bending radius, and for 80km circumference, a luminosity of 5 10^34 cm^{-2}s^{-1} in four collision points appears feasible. Beamstrahlung becomes relevant at these high luminosities, leading to a design requirement of large momentum acceptance both in the accelerating system and in the optics. The larger machine could reach the top quark threshold, would yield luminosities per interaction point of 10^36 cm^{-2}s^{-1} at the Z pole (91 GeV) and 2 10^35 cm^{-2}s^{-1} at the W pair production threshold (80 GeV per beam). The energy spread is reduced in the larger ring with respect to what is was at LEP, giving confidence that beam polarization for energy calibration purposes should be available up to the W pair threshold. The capabilities in term of physics performance are outlined.
△ Less
Submitted 1 April, 2013; v1 submitted 2 August, 2012;
originally announced August 2012.
-
Present status and first results of the final focus beam line at the KEK Accelerator Test Facility
Authors:
P. Bambade,
M. Alabau Pons,
J. Amann,
D. Angal-Kalinin,
R. Apsimon,
S. Araki,
A. Aryshev,
S. Bai,
P. Bellomo,
D. Bett,
G. Blair,
B. Bolzon,
S. Boogert,
G. Boorman,
P. N. Burrows,
G. Christian,
P. Coe,
B. Constance,
Jean-Pierre Delahaye,
L. Deacon,
E. Elsen,
A. Faus-Golfe,
M. Fukuda,
J. Gao,
N. Geffroy
, et al. (69 additional authors not shown)
Abstract:
ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF dam** ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, Europe…
▽ More
ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF dam** ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, European, and U.S. scientists. The present status and first results are described.
△ Less
Submitted 5 July, 2012;
originally announced July 2012.
-
Studies of beam offset due to beam-beam interactions at a warm linear collider
Authors:
Nicolas Delerue,
Toshiaki Tauchi,
Kaoru Yokoya
Abstract:
At a warm linear collider the short time interval at which bunches will pass near each other in the interaction region may lead to significant alteration of the bunches positions. In this paper we quantify the intensity of this effect and show that it can be addressed by a fast intra-pulse feedback system.
At a warm linear collider the short time interval at which bunches will pass near each other in the interaction region may lead to significant alteration of the bunches positions. In this paper we quantify the intensity of this effect and show that it can be addressed by a fast intra-pulse feedback system.
△ Less
Submitted 1 September, 2005; v1 submitted 11 November, 2004;
originally announced November 2004.
-
TESLA Technical Design Report, Part VI, Chapter 1: The Photon Collider at TESLA
Authors:
B. Badelek,
C. Blochinger,
J. Blumlein,
E. Boos,
R. Brinkmann,
H. Burkhardt,
P. Bussey,
C. Carimalo,
J. Chyla,
A. K. Ciftci,
W. Decking,
A. De Roeck,
V. Fadin,
M. Ferrario,
A. Finch,
H. Fraas,
F. Franke,
M. Galynskii,
A. Gamp,
I. Ginzburg,
R. Godbole,
D. S. Gorbunov,
G. Gounaris,
K. Hagiwara,
L. Han
, et al. (74 additional authors not shown)
Abstract:
TESLA Technical Design Report, Part VI, Chapter 1: The Photon Collider at TESLA
TESLA Technical Design Report, Part VI, Chapter 1: The Photon Collider at TESLA
△ Less
Submitted 6 August, 2001;
originally announced August 2001.
-
An Algorithm for Calculating the Spin Tune in Circular Accelerators
Authors:
Kaoru Yokoya
Abstract:
A new algorithm for calculating the spin tune and the n-axis for circular accelerators is presented. The method resembles the one employed in the existing program code SODOM in that one-turn numerical spin maps at equally spaced orbit angle variables are used but it is more efficient than the latter. Furthermore, it is applicable at large openning angles of the n-axis, whereas the existing SODOM…
▽ More
A new algorithm for calculating the spin tune and the n-axis for circular accelerators is presented. The method resembles the one employed in the existing program code SODOM in that one-turn numerical spin maps at equally spaced orbit angle variables are used but it is more efficient than the latter. Furthermore, it is applicable at large openning angles of the n-axis, whereas the existing SODOM only converges for small angles.
△ Less
Submitted 23 February, 1999;
originally announced February 1999.
-
Simulations of the Interaction Region in a Photon-Photon Collider
Authors:
P. Chen,
T. Ohgaki,
A. Spitkovsky,
T. Takahashi,
K. Yokoya
Abstract:
The status and initial performance of a simulation program CAIN for interaction region of linear colliders is described. The program is developed to be applicable for e+e-, e-e-, e-gamma and gamma-gamma linear colliders. As an example of an application, simulation of a gamma-gamma collider option of NLC is reported.
The status and initial performance of a simulation program CAIN for interaction region of linear colliders is described. The program is developed to be applicable for e+e-, e-e-, e-gamma and gamma-gamma linear colliders. As an example of an application, simulation of a gamma-gamma collider option of NLC is reported.
△ Less
Submitted 11 April, 1997;
originally announced April 1997.