-
Combined effects of amplitude, frequency and bandwidth on wavepackets in laminar turbulent transition
Authors:
Kean Lee Kang,
K. S. Yeo
Abstract:
This study concerns wavepackets in laminar turbulent transition in a Blasius boundary layer. While initial amplitude and frequency have well-recognized roles in the transition process, the current study on the combined effects of amplitude, frequency, and bandwidth on the propagation of wavepackets is believed to be new. Because of the complexity of the system, these joint variations in multiple p…
▽ More
This study concerns wavepackets in laminar turbulent transition in a Blasius boundary layer. While initial amplitude and frequency have well-recognized roles in the transition process, the current study on the combined effects of amplitude, frequency, and bandwidth on the propagation of wavepackets is believed to be new. Because of the complexity of the system, these joint variations in multiple parameters could give rise to effects not seen through the variation of any single parameter. Direct numerical simulations (DNS) are utilized in a full factorial (fully crossed) design to investigate both individual and joint effects of variation in the simulation parameters, with a special focus on three distinct variants of wavepacket transition {\textemdash} the reverse Craik triad formation sequence, concurrent N-type and K-type transition and abrupt shifts in dominant frequency. From our factorial study, we can summarize the key transition trends of wavepackets as follows:
1. Broad bandwidth wavepackets predominantly transit to turbulence via the N-route. This tendency remains strong even as the frequency width is reduced.
2. Narrow bandwidth wavetrains exhibit predominantly K-type transition. The front broadband part of an emerging wavetrain may experience N-type transition, but this wavefront should not be considered as a part of truly narrow-bandwidth wavepackets.
3. K-type transition is the most likely for wavepackets that are initiated with high energy/amplitude and/or with the peak frequency at the lower branch of the neutral stability curve.
△ Less
Submitted 5 November, 2019;
originally announced November 2019.
-
Hybrid POD-FFT analysis of nonlinear evolving coherent structures of DNS wavepacket in laminar-turbulent transition
Authors:
Kean Lee Kang,
K. S. Yeo
Abstract:
This paper concerns the study of direct numerical simulation (DNS) data of a wavepacket in laminar turbulent transition in a Blasius boundary layer. The decomposition of this wavepacket into a set of "modes" (a basis that spans an approximate solution space) can be achieved in a wide variety of ways. Two well-known tools are the fast Fourier transform (FFT) and the proper orthogonal decomposition…
▽ More
This paper concerns the study of direct numerical simulation (DNS) data of a wavepacket in laminar turbulent transition in a Blasius boundary layer. The decomposition of this wavepacket into a set of "modes" (a basis that spans an approximate solution space) can be achieved in a wide variety of ways. Two well-known tools are the fast Fourier transform (FFT) and the proper orthogonal decomposition (POD). To synergize the strengths of both methods, a hybrid POD-FFT is pioneered, using the FFT as a tool for interpreting the POD modes. The POD-FFT automatically identifies well-known fundamental, subharmonic and Klebanoff modes in the flow, even though it is blind to the underlying physics. Moreover, the POD-FFT further separates the subharmonic content of the wavepacket into three fairly distinct parts: a positively detuned mode resembling a Lambda-vortex, a Craik-type tuned mode and a Herbert-type positive-negative detuned mode pair, in decreasing order of energy. This distinction is less widely recognized, but it provides a possible explanation for the slightly positively detuned subharmonic mode often observed in previous experiments and simulations.
△ Less
Submitted 2 October, 2017;
originally announced October 2017.
-
Incipient Separation in Shock Wave Boundary Layer Interactions as Induced by Sharp Fin
Authors:
Hua-Shu Dou,
Boo Cheong Khoo,
Khoon Seng Yeo
Abstract:
The incipient separation induced by the shock wave turbulent boundary layer interaction at the sharp fin is the subject of present study. Existing theories for the prediction of incipient separation, such as those put forward by McCabe (1966) and Dou and Deng (1992), can have thus far only predicting the direction of surface streamline and tend to over-predict the incipient separation condition…
▽ More
The incipient separation induced by the shock wave turbulent boundary layer interaction at the sharp fin is the subject of present study. Existing theories for the prediction of incipient separation, such as those put forward by McCabe (1966) and Dou and Deng (1992), can have thus far only predicting the direction of surface streamline and tend to over-predict the incipient separation condition based on the Stanbrook's criterion. In this paper, the incipient separation is firstly predicted with Dou and Deng (1992)'s theory and then compared with Lu and Settles (1990)' experimental data. The physical mechanism of the incipient separation as induced by the shock wave/turbulent boundary layer interactions at sharp fin is explained via the surface flow pattern analysis. Furthermore, the reason for the observed discrepancy between the predicted and experimental incipient separation conditions is clarified. It is found that when the wall limiting streamlines behind the shock wave becomes\ aligning with one ray from the virtual origin as the strength of shock wave increases, the incipient separation line is formed at which the wall limiting streamline becomes perpendicular to the local pressure gradient. The formation of this incipient separation line is the beginning of the separation process. The effects of Reynolds number and the Mach number on incipient separation are also discussed. Finally, a correlation for the correction of the incipient separation angle as predicted by the theory is also given.
△ Less
Submitted 11 November, 2008;
originally announced November 2008.
-
Numerical Simulation of Fibre Suspension Flow through an Axisymmetric Contraction and Expansion Passages by Brownian Configuration Field Method
Authors:
Zhumin Lu,
Boo Cheong Khoo,
Hua-Shu Dou,
Nhan Phan-Thien,
Khoon Seng Yeo
Abstract:
In this paper, the finite element method is combined with the Brownian Configuration Field (BFC) method to simulate the fibre suspension flow in axisymmetric contraction and expansion passages. In order to solve for the high stress at high concentration, the Discrete Adaptive Viscoelastic Stress Splitting (DAVSS) method is employed. For the axisymmetric contraction and expansion passages with di…
▽ More
In this paper, the finite element method is combined with the Brownian Configuration Field (BFC) method to simulate the fibre suspension flow in axisymmetric contraction and expansion passages. In order to solve for the high stress at high concentration, the Discrete Adaptive Viscoelastic Stress Splitting (DAVSS) method is employed. For the axisymmetric contraction and expansion passages with different geometry ratios, the results obtained are compared to available constitutive models and experiments. The predicted vortex length for dilute suspensions agrees well with experimental data in literature. Our numerical results show clearly the effect on vortex enhancement with increase of the volume fractions and the aspect ratios. Effect of aspect ratio of fibres on the vortex length is also studied. It is found that for the lower expansion ratio flows the vortex dimension in the corner region is fairly independent of fibre concentration and aspect ratio of fibres while the said vortex dimension increases with the increase of fibre concentration for contraction flows. The finding suggests that the aligned fibre approximation traditionally employed in previous work does not exactly describe the effect of fibre motion, and the present BFC method is deemed more suitable for the flow of dilute fibre suspensions. In terms of numerics, the employment of DAVSS enhances numerical stability in the presence of high concentration of fibre in the flow.
△ Less
Submitted 10 November, 2008;
originally announced November 2008.
-
Simulations of Fibre Orientation in Dilute Suspensions with Front Moving in the Filling Process of a Rectangular Channel Using Level Set Method
Authors:
Hua-Shu Dou,
Boo Cheong Khoo,
Nhan Phan-Thien,
Khoon Seng Yeo,
Rong Zheng
Abstract:
The simulation of fibre orientation in dilute suspension with a front moving is carried out using the projection and level set methods. The motion of fibres is described using the Jeffery equation and the contribution of fibres to the flow is accounted for by the configuration field method. The governing Navier-Stokes equation for the fluid flow is solved using the projection method with finite…
▽ More
The simulation of fibre orientation in dilute suspension with a front moving is carried out using the projection and level set methods. The motion of fibres is described using the Jeffery equation and the contribution of fibres to the flow is accounted for by the configuration field method. The governing Navier-Stokes equation for the fluid flow is solved using the projection method with finite difference scheme, while the fibre-related equations are directly solved with the Runge-Kutta method. Our findings indicate that the fibre motion has strong influence on the distributions of the streamwise and transverse velocities in the fountain flow. Fibre motion produces strong normal stress near the wall which leads to the reduction of transversal velocity as compared to the Newtonian flow without fibres and in turn the streamwise velocity near the wall is increased. Thus, the fibre addition to the flow weakens the strength of the fountain flow. It is also found that the fibre orientation is not always along the direction of velocity vector in the process of mold filling. In the region of the fountain flow, the fibre near the centerline is more oriented cross the streamwise direction comparing to that in the region far behind the flow front. This leads to that the fibre near the centreline in the region of fountain flow is more extended along the transverse direction. Since fibre orientation in the suspension flow and the shape of the flow front have great bearing on the quality of the product made from injection molding, this study has much implications for engineering applications. These results can also be useful in other field dealing with fibre suspensions.
△ Less
Submitted 10 November, 2008;
originally announced November 2008.
-
Threshold amplitudes for transition to turbulence in a pipe
Authors:
Hua-Shu Dou,
Boo Cheong Khoo,
Khoon Seng Yeo
Abstract:
Threshold amplitude of disturbance for transition to turbulence in a pipe Poiseuille flow is investigated. Based on the energy gradient theory, we argued that the transition to turbulence depends on magnitudes of the energy gradient of mean flow and the disturbance energy. Furthermore, the threshold disturbance energy required for turbulence transition is expressed as a function of the complemen…
▽ More
Threshold amplitude of disturbance for transition to turbulence in a pipe Poiseuille flow is investigated. Based on the energy gradient theory, we argued that the transition to turbulence depends on magnitudes of the energy gradient of mean flow and the disturbance energy. Furthermore, the threshold disturbance energy required for turbulence transition is expressed as a function of the complementary angle to the energy angle which also characterizes the behaviour of the energy gradient of mean flow. With some mathematical treatments, the variation of the threshold energy of disturbance versus the Reynolds number is obtained. Then, it is found for a fixed disturbance frequency that the normalized amplitude of disturbance is scaled by Re with an exponent of -3/2 for the transition occurrence in a pipe. This value of exponent agrees well with several recent results reported in the literature. Finally, the mechanism of transition to turbulence is suggested for different disturbance levels.
△ Less
Submitted 25 June, 2005; v1 submitted 18 February, 2005;
originally announced February 2005.
-
Instability of Taylor-Couette Flow between Concentric Rotating Cylinders
Authors:
Hua-Shu Dou,
Boo Cheong Khoo,
Koon Seng Yeo
Abstract:
The energy gradient theory is used to study the instability of Taylor-Couette flow between concentric rotating cylinders. This theory has been proposed in our previous works. In our previous studies, the energy gradient theory was demonstrated to be applicable for wall-bounded parallel flows. It was found that the critical value of the energy gradient parameter Kmax at turbulent transition is abou…
▽ More
The energy gradient theory is used to study the instability of Taylor-Couette flow between concentric rotating cylinders. This theory has been proposed in our previous works. In our previous studies, the energy gradient theory was demonstrated to be applicable for wall-bounded parallel flows. It was found that the critical value of the energy gradient parameter Kmax at turbulent transition is about 370-389 for wall-bounded parallel flows (which include plane Poiseuille flow, pipe Poiseuille flow and plane Couette flow) below which no turbulence occurs. In this paper, the detailed derivation for the calculation of the energy gradient parameter in the flow between concentric rotating cylinders is provided. The calculated results for the critical condition of primary instability (with semi-empirical treatment) are found to be in very good agreement with the experiments in the literature. A possible mechanism of spiral turbulence generation observed for counter-rotation of two cylinders can also be explained using the energy gradient theory. The energy gradient theory can serve to relate the condition of transition in Taylor-Couette flow to that in plane Couette flow. The latter reasonably becomes the limiting case of the former when the radii of cylinders tend to infinity. It is our contention that the energy gradient theory is possibly fairly universal for analysis of flow instability and turbulent transition, and is found valid for both pressure and shear driven flows in parallel and rotating flow configurations.
△ Less
Submitted 8 June, 2010; v1 submitted 14 February, 2005;
originally announced February 2005.
-
Energy Loss Distribution in the Plane Couette Flow and the Taylor-Couette Flow between Concentric Rotating Cylinders
Authors:
Hua-Shu Dou,
Boo Cheong Khoo,
Khoon Seng Yeo
Abstract:
The distribution of energy loss due to viscosity friction in plane Couette flow and Taylor-Couette Flow between concentric rotating cylinders are studied in detail for various flow conditions. The energy loss is related to the industrial processes in some fluid delivery devices and has significant influence on the flow efficiency, flow stability, turbulent transition, mixing, and heat transfer beh…
▽ More
The distribution of energy loss due to viscosity friction in plane Couette flow and Taylor-Couette Flow between concentric rotating cylinders are studied in detail for various flow conditions. The energy loss is related to the industrial processes in some fluid delivery devices and has significant influence on the flow efficiency, flow stability, turbulent transition, mixing, and heat transfer behaviours, etc. Therefore, it is important to know about the energy loss distribution in the flow domain and to know its influence on the flow for better understanding of the flow physics. The calculation or methodology of calculating the energy loss distribution in the Taylor-Couette flow between concentric rotating cylinders is not readily found in the open literature. In this paper, the principle and the calculation are given for single cylinder rotation of either the inner or outer cylinder, and counter and same direction rotation of two cylinders. For comparison, the distribution of energy loss in a plane Couette flow is also derived for various flow conditions. Discussions of the effect of energy loss on the flow behaviour are carried out from which some findings are suggested.
△ Less
Submitted 15 June, 2010; v1 submitted 28 January, 2005;
originally announced January 2005.
