Showing 1–31 of 31 results for author: Yasui, T

Laser-scanning optical-frequency-comb microscopy for multimodal imaging

Authors: Shimpei Kajiwara, Eiji Hase, Shota Nakano, Keishiro Ootani, Tomoya Okabe, Hidenori Koresawa, Akifumi Asahara, Kazumichi Yoshii, Hirotsugu Yamamoto, Kaoru Minoshima, Takeshi Yasui, Takeo Minamikawa

Abstract: We introduce a novel laser-scanning optical microscopy technique that employs optical-frequency-comb (OFC) lasers. This method facilitates multimodal spectroscopic imaging by analyzing interferograms produced via a dual-comb spectroscopic approach. Such interferograms capture comprehensive light information, including amplitude, phase, polarization, frequency, and time of flight information, enabl… ▽ More We introduce a novel laser-scanning optical microscopy technique that employs optical-frequency-comb (OFC) lasers. This method facilitates multimodal spectroscopic imaging by analyzing interferograms produced via a dual-comb spectroscopic approach. Such interferograms capture comprehensive light information, including amplitude, phase, polarization, frequency, and time of flight information, enabling multimodal imaging from a single measurement. We demonstrate the potential of this technique across several spectroscopic imaging applications. △ Less

Submitted 28 May, 2024; originally announced May 2024.

Comments: 11 pages, 8 figures

Reduction of temperature drift in refractive-index-sensing optical frequency comb by active-dummy compensation of dual-comb configuration

Authors: Shogo Miyamura, Masayuki Higaki, Shuji Taue, Yoshiaki Nakajima, Yu Tokizane, Eiji Hase, Takeo Minamikawa, Takeshi Yasui

Abstract: Refractive-index (RI) sensing plays a pivotal role in various domains, encompassing applications like glucose sensing, biosensing, and gas detection. Despite the advantages of optical fiber sensors, such as their compact size, flexibility, and immunity to electromagnetic interference, they are often plagued by temperature-induced drift, which adversely impacts the accuracy of RI measurements. This… ▽ More Refractive-index (RI) sensing plays a pivotal role in various domains, encompassing applications like glucose sensing, biosensing, and gas detection. Despite the advantages of optical fiber sensors, such as their compact size, flexibility, and immunity to electromagnetic interference, they are often plagued by temperature-induced drift, which adversely impacts the accuracy of RI measurements. This study introduces an innovative approach to alleviate temperature-induced drift in RI-sensing optical frequency combs (OFCs) by employing active-dummy compensation. The central idea revolves around the utilization of a dual-comb setup, comprising an active-sensing OFC that monitors both sample RI and environmental temperature, and a dummy-sensing OFC that exclusively tracks environmental temperature. The disparity between these sensor signals, denoted as delta_frep, effectively nullifies the effects of temperature variations, yielding a temperature-independent sensor signal for precise RI measurements. This investigation delves into the relationship between active-dummy temperature compensation and delta_frep. It becomes evident that diminishing delta_frep values enhance temperature compensation, thereby diminishing fluctuations in delta_frep caused by environmental temperature shifts. This compensation technique establishes a direct link between delta_frep and sample RI, paving the way for absolute RI measurements based on delta_frep. The findings of this research are a valuable contribution to the advancement of accurate and temperature-compensated RI sensing methodologies using dual-comb setup. The insights gained regarding delta_frep dependency and the strategies proposed for enhancing measurement precision and stability hold significant promise for applications in fields of product quality control and biosensing. △ Less

Submitted 11 May, 2024; originally announced May 2024.

Comments: 25 pages, 9 figures

Jones-matrix dual-comb spectroscopic polarimetry

Authors: Hidenori Koresawa, Hiroki Kitahama, Eiji Hase, Yu Tokizane, Akifumi Asahara, Takeo Minamikawa, Kaoru Minoshima, Takeshi Yasui

Abstract: Spectroscopic polarimetry (SP) is a powerful tool for evaluation of thin film, optical materials, and biological samples because it can provide both polarimetric and spectroscopic characteristics of objects. However, its performance is often hampered by the mechanical instability and the limited data acquisition speed arising from the mechanical polarization modulation. Dual-comb spectroscopic pol… ▽ More Spectroscopic polarimetry (SP) is a powerful tool for evaluation of thin film, optical materials, and biological samples because it can provide both polarimetric and spectroscopic characteristics of objects. However, its performance is often hampered by the mechanical instability and the limited data acquisition speed arising from the mechanical polarization modulation. Dual-comb spectroscopic polarimetry (DCSP) based on a combination of SP with dual-comb spectroscopy can acquire optical spectra of amplitude ratio and phase difference in p- and s-polarization components of the output light from simultaneous measurement of optical spectra of optical amplitude and phase in p- and s-polarization components without the need for mechanical polarization modulation. In this article, we combine the DCSP with polarization control pulse sequences (PCPS) with different polarizations and time delays for a more detailed analysis of the sample's polarization response based on Jones matrix. We obtain Jones matrix of a sample as a function of wavelength by measuring those optical spectra while multiplexing the incident light into multiple polarizations instead of a single polarization. Such Jones matrix DCSP (JM-DCSP) is applied for analysis of optical elements with known polarization property and its experimental result is in good agreement with theoretical values, indicating the validity of the proposed method. JM-DCSP will further expand the application scope of SP. △ Less

Submitted 5 August, 2023; originally announced August 2023.

Comments: 24 pages, 8 figures

Coherent linking between confocal amplitude image and confocal phase image in dual-comb microscopy

Authors: Takahiko Mizuno, Takuya Tsuda, Eiji Hase, Hirotsugu Yamamoto, Takeo Minamikawa, Takeshi Yasui

Abstract: This paper presents a coherent linking approach between confocal amplitude and confocal phase images acquired using dual-comb microscopy (DCM). DCM combines the advantages of confocal laser microscopy and quantitative phase microscopy, offering high axial resolution and scan-less imaging capability. By exploiting the coherence between confocal amplitude and phase images within the same DCM system,… ▽ More This paper presents a coherent linking approach between confocal amplitude and confocal phase images acquired using dual-comb microscopy (DCM). DCM combines the advantages of confocal laser microscopy and quantitative phase microscopy, offering high axial resolution and scan-less imaging capability. By exploiting the coherence between confocal amplitude and phase images within the same DCM system, we accurately determine the number of phase unwrap** iterations, eliminating phase wrap** ambiguity. The method is demonstrated with samples having micrometer-range optical thickness and nanometer-scale surface roughness. The results showcase an expanded axial dynamic range, ranging from micrometers to millimeters, while maintaining nanometer-level axial resolution. This coherently linked DCM imaging technique enables the simultaneous acquisition of absolute phase information, enhancing its potential for high-axial-resolution imaging in a wide range of applications. △ Less

Submitted 5 August, 2023; originally announced August 2023.

Comments: 20 pages, 5 figures

Wireless data transmission in a 560-GHz band using low-phase-noise terahertz wave generated by photomixing of a pair of distributed feedback lasers injection-locking to Kerr micro-resonator soliton comb

Authors: Yu Tokizane, Shota Okada, Takumi Kikuhara, Hiroki Kishikawa, Yasuhiro Okamura, Yoshihiro Makimoto, Kenji Nishimoto, Takeo Minamikawa, Eiji Hase, Jun-Ichi Fujikata, Masanobu Haraguchi, Atsushi Kanno, Shintaro Hisatake, Naoya Kuse, Takeshi Yasui

Abstract: The demand for higher data rates in next-generation mobile wireless communication systems (6G) has led to significant interest in terahertz (THz) waves as a high-frequency, broad modulation bandwidth carrier wave. In this study, we propose and demonstrate a wireless data transfer in the 560-GHz band using low-phase-noise THz waves generated by photomixing of a pair of distributed feedback lasers i… ▽ More The demand for higher data rates in next-generation mobile wireless communication systems (6G) has led to significant interest in terahertz (THz) waves as a high-frequency, broad modulation bandwidth carrier wave. In this study, we propose and demonstrate a wireless data transfer in the 560-GHz band using low-phase-noise THz waves generated by photomixing of a pair of distributed feedback lasers injection-locking to Kerr micro-resonator soliton comb. Experimental results showed near-error-free on-off keying (OOK) data transfer at 1 Gbit/s in the 560-GHz band, with a Q-factor of 6.23, surpassing the error-free limit. Also, modulation formats of binary phase shift keying (BPSK) and quadrature phase shift keying (QPSK) were successfully used, showing clear constellation diagrams and relatively low root mean squared error vector magnitude (rms EVM) values of 23.9% and 23.6%, respectively. Moreover, data transfer at 0.4 Gbit/s in 16 quadrature amplitude modulation (16QAM) demonstrated clear isolated symbols and achieved a low rms EVM value of 8.1%, complying with the IEEE 802.15.3d standard amendment. These demonstrations highlight the potential of using injection-locked DFB lasers with the Kerr micro-resonator soliton comb to achieve high-quality, high-speed wireless data transfer in the 560-GHz band. These findings contribute significantly to the advancement of wireless communication technology in the THz frequency range and pave the way for the realization of 6G wireless communication systems. △ Less

Submitted 21 August, 2023; v1 submitted 5 August, 2023; originally announced August 2023.

Carrier conversion from terahertz wave to dual-wavelength near-infrared light injection-locking to optical comb using asynchronous nonpolarimetric electro-optic downconversion with electro-optic polymer modulator

Authors: Yudai Matsumura, Yu Tokizane, Eiji Hase, Naoya Kuse, Takeo Minamikawa, Jun-ichi Fujikata, Hiroki Kishikawa, Masanobu Haraguchi, Yasuhiro Okamura, Takahiro Kaji, Akira Otomo, Isao Morohashi, Atsushi Kanno, Shintaro Hisatake, Takeshi Yasui

Abstract: THz waves are promising wireless carriers for next-generation wireless communications, where a seamless connection from wireless to optical communication is required. In this study, we demonstrate carrier conversion from THz waves to dual-wavelength NIR light injection-locking to an optical frequency comb using asynchronous nonpolarimetric electro-optic downconversion with an electro-optic polymer… ▽ More THz waves are promising wireless carriers for next-generation wireless communications, where a seamless connection from wireless to optical communication is required. In this study, we demonstrate carrier conversion from THz waves to dual-wavelength NIR light injection-locking to an optical frequency comb using asynchronous nonpolarimetric electro-optic downconversion with an electro-optic polymer modulator. THz wave in the W band was obtained as a stable photonic RF beat signal of 1 GHz with a signal-to-noise ratio of 25 dB via the proposed THz-to-NIR carrier conversion. In addition, the results imply the potential of the photonic detection of THz waves for wireless-to-optical seamless communication. △ Less

Submitted 25 April, 2023; originally announced April 2023.

Comments: 15 pages, 5 figures

Journal ref: Optics Express, Vol. 31, Issue 20, pp. 33103-33112 (2023)

Terahertz wireless communication at 560-GHz band using Kerr micro-resonator soliton comb

Authors: Yu Tokizane, Shota Okada, Kenji Nishimoto, Yasuhiro Okamura, Hiroki Kishikawa, Eiji Hase, Jun-Ichi Fujikata, Masanobu Haraguchi, Atsushi Kanno, Shintaro Hisatake, Naoya Kuse, Takeshi Yasui

Abstract: Terahertz (THz) waves have attracted attention as carrier waves for next-generation wireless communications (6G). Electronic THz emitters are widely used in current mobile communications; however, they may face technical limitations in 6G with upper-frequency limits. We demonstrate wireless communication in a 560-GHz band by using a photonic THz emitter based on photomixing of a 560-GHz-spacing so… ▽ More Terahertz (THz) waves have attracted attention as carrier waves for next-generation wireless communications (6G). Electronic THz emitters are widely used in current mobile communications; however, they may face technical limitations in 6G with upper-frequency limits. We demonstrate wireless communication in a 560-GHz band by using a photonic THz emitter based on photomixing of a 560-GHz-spacing soliton microcomb in a uni-travelling carrier photodiode together with a THz receiver of Schottky barrier diode. The on-off keying data transfer with 2-Gbit/s achieves a Q-factor of 3.4, thus, satisfying the limit of forward error correction. △ Less

Submitted 25 January, 2023; originally announced January 2023.

Comments: 17 pages, 4 figure

Journal ref: Optics Continuum Vol. 2, Issue 5, pp. 1267-1275 (2023)

Nanometer-precision surface metrology of millimeter-size stepped objects using full-cascade-linked synthetic-wavelength digital holography using a line-by-line full-mode-extracted optical frequency comb

Authors: Eiji Hase, Yu Tokizane, Kazuki Sadahiro, Takeo Minamikawa, Isao Morohashi, Takeshi Yasui

Abstract: Digital holography (DH) is a powerful tool for surface profilometry of objects with sub-wavelength precision. In this article, we demonstrate full-cascade-linked synthetic-wavelength DH (FCL-SW-DH) for nanometer-precision surface metrology of millimeter-size stepped objects. 300 modes of optical frequency comb (OFC) with different wavelengths are sequentially extracted at a step of mode spacing fr… ▽ More Digital holography (DH) is a powerful tool for surface profilometry of objects with sub-wavelength precision. In this article, we demonstrate full-cascade-linked synthetic-wavelength DH (FCL-SW-DH) for nanometer-precision surface metrology of millimeter-size stepped objects. 300 modes of optical frequency comb (OFC) with different wavelengths are sequentially extracted at a step of mode spacing from a 10GHz-spacing, 3.72THz-spanning electro-optic modulator OFC (EOM-OFC). The resulting 299 synthetic wavelengths and a single optical wavelength are used to generate a fine-step wide-range cascade link covering within a wavelength range of 1.54 um to 29.7 mm. We determine the 0.1000mm-stepped surface with axial uncertainty of 6.1 nm within the maximum axial range of 14.85 mm. △ Less

Submitted 25 January, 2023; originally announced January 2023.

Comments: 22 pages, 6 figures

Journal ref: Optics Express, Vol. 31, Issue 11, pp. 18088-18097 (2023)

Rapid, high-sensitivity detection of biomolecules using dual-comb biosensing: application to the SARS-CoV-2 nucleocapsid protein

Authors: Shogo Miyamura, Ryo Oe, Takuya Nakahara, Shota Okada, Shuji Taue, Yu Tokizane, Takeo Minamikawa, Taka-aki Yano, Kunihiro Otsuka, Ayuko Sakane, Takuya Sasaki, Koji Yasutomo, Taira Kajisa, Takeshi Yasui

Abstract: Rapid, sensitive detection of biomolecules is important for improved testing methods for viruses as well as biomarkers and environmental hormones. For example, testing for SARS-CoV-2 is essential in the fight against the COVID-19 pandemic. Reverse-transcription polymerase chain reaction (RT-PCR) is the current standard for COVID-19 testing; however, it is hampered by the long testing process. Shor… ▽ More Rapid, sensitive detection of biomolecules is important for improved testing methods for viruses as well as biomarkers and environmental hormones. For example, testing for SARS-CoV-2 is essential in the fight against the COVID-19 pandemic. Reverse-transcription polymerase chain reaction (RT-PCR) is the current standard for COVID-19 testing; however, it is hampered by the long testing process. Shortening the testing process while achieving high sensitivity would facilitate sooner quarantine and thus presumably prevention of the spread of SARS-CoV-2. Here, we aim to achieve rapid, sensitive detection of the SARS-CoV-2 nucleocapsid protein by enhancing the performance of optical biosensing with a dual-comb configuration of optical frequency combs. The virus-concentration-dependent optical spectrum shift is transformed into a photonic RF shift by frequency conversion between the optical and RF regions, facilitating mature electrical frequency measurements. Furthermore, active-dummy temperature-drift compensation enables very small changes in the virus-concentration-dependent signal to be extracted from the large, variable background signal. This dual-comb biosensing technique has the potential to reduce the COVID-19 testing time to 10 min while maintaining sensitivity close to that of RT-PCR. Furthermore, this system can be applied for sensing of not only viruses but also various biomolecules for clinical diagnosis, health care, and environmental monitoring. △ Less

Submitted 26 July, 2022; v1 submitted 25 April, 2022; originally announced April 2022.

Comments: 42 pages, 6 figures, 2 tables

Journal ref: Scientific Reports, volume 13, Article number: 14541 (2023)

Low phase noise THz generation from a fiber-referenced Kerr microresonator soliton comb

Authors: Naoya Kuse, Kenji Nishimoto, Yu Tokizane, Shota Okada, Gabriele Navickaite, Michael Geiselmann, Kaoru Minoshima, Takeshi Yasui

Abstract: THz oscillators generated via frequency-multiplication of microwaves are facing difficulty in achieving low phase noise. Photonics-based techniques, in which optical two tones are translated to a THz wave through opto-electronic conversion, are promising if the relative phase noise between the two tones is well suppressed. Here, a THz ($\approx$ 560 GHz) wave with a low phase noise is provided by… ▽ More THz oscillators generated via frequency-multiplication of microwaves are facing difficulty in achieving low phase noise. Photonics-based techniques, in which optical two tones are translated to a THz wave through opto-electronic conversion, are promising if the relative phase noise between the two tones is well suppressed. Here, a THz ($\approx$ 560 GHz) wave with a low phase noise is provided by a frequency-stabilized, dissipative Kerr microresonator soliton comb. The repetition frequency of the comb is stabilized to a long fiber in a two-wavelength delayed self-heterodyne interferometer, significantly reducing the phase noise of the THz wave. A measurement technique to characterize the phase noise of the THz wave beyond the limit of a frequency-multiplied microwave is also demonstrated, showing the superior phase noise of the THz wave to any other photonic THz oscillators (> 300 GHz). △ Less

Submitted 2 November, 2022; v1 submitted 5 April, 2022; originally announced April 2022.

Thermal control of Kerr microresonator soliton comb via an optical sideband

Authors: Kenji Nishimoto, Kaoru Minoshima, Takeshi Yasui, Naoya Kuse

Abstract: We report the thermal control of a dissipative Kerr microresonator soliton comb via an optical sideband generated from an electro-optic modulator. Same as the previous reports using an independent auxiliary laser, our sideband-based (S-B) auxiliary light also enables to access a stable soliton comb and to reduce the phase noise of the soliton comb, greatly simplifying the setup with an auxiliary l… ▽ More We report the thermal control of a dissipative Kerr microresonator soliton comb via an optical sideband generated from an electro-optic modulator. Same as the previous reports using an independent auxiliary laser, our sideband-based (S-B) auxiliary light also enables to access a stable soliton comb and to reduce the phase noise of the soliton comb, greatly simplifying the setup with an auxiliary laser. More importantly, because of the intrinsically high frequency/phase correlation between the pump and S-B auxiliary light, the detuning between the pump and resonance frequency is automatically almost fixed, allowing the 18 times larger "effective"soliton existence range than the conventional method using an independent auxiliary laser, as well as the scanning of the soliton comb of more than 10 GHz without using microheaters. △ Less

Submitted 14 December, 2021; v1 submitted 10 November, 2021; originally announced November 2021.

Frequency-scanned microresonator soliton comb with the tracking of the frequency of all comb modes

Authors: Naoya Kuse, Gabriele Navickaite, Michael Geiselmann, Takeshi Yasui, Kaoru Minoshima

Abstract: Rapid and large scanning of a dissipative Kerr-microresonator soliton comb with the characterization of all comb modes along with the separation of the comb modes is imperative for the emerging applications of the frequency-scanned soliton combs. However, the scan speed is limited by the gain of feedback systems and the measurement of the frequency shift of all comb modes has not been demonstrated… ▽ More Rapid and large scanning of a dissipative Kerr-microresonator soliton comb with the characterization of all comb modes along with the separation of the comb modes is imperative for the emerging applications of the frequency-scanned soliton combs. However, the scan speed is limited by the gain of feedback systems and the measurement of the frequency shift of all comb modes has not been demonstrated. To overcome the limitation of the feedback, we incorporate the feedback with the feedforward. With the additional gain of > 40 dB by a feedforward signal, a dissipative Kerr-microresonator soliton comb is scanned by 70 GHz in 500 $μ$s, 50 GHz in 125 $μ$s, and 25 GHz in 50 $μ$s (= 500 THz/s). Furthermore, we propose and demonstrate a method to measure the frequency shift of all comb modes, in which an imbalanced Mach-Zehnder interferometer with two outputs with different wavelengths is used. Because of the two degrees of freedom of optical frequency combs, the measurement at the two different wavelengths enables the estimation of the frequency shift of all comb modes. △ Less

Submitted 30 June, 2021; originally announced June 2021.

Journal ref: Optics Letters Vol. 46, Issue 14, pp. 3400-3403 (2021)

Nonlinear terahertz-wave radiation generated by mid-infrared dual-chirped optical parametric amplification femtosecond pulse laser excitation

Authors: Kyuki Shibuya, Kouji Nawata, Yoshiaki Nakajima, Yuxi Fu, Eiji J. Takahashi, Katsumi Midorikawa, Takeshi Yasui, Hiroaki Minamide

Abstract: We demonstrate an efficient procedure for terahertz-wave radiation generation by applying a nonlinear wavelength conversion approach using a mid-infrared pump source. We used a 3.3 μm dual-chirped optical parametric amplification source and a 1.5 μm fiber laser for a comparison of energy conversion efficiencies. Nonlinear inorganic and organic crystals were used, and for the periodically-poled lit… ▽ More We demonstrate an efficient procedure for terahertz-wave radiation generation by applying a nonlinear wavelength conversion approach using a mid-infrared pump source. We used a 3.3 μm dual-chirped optical parametric amplification source and a 1.5 μm fiber laser for a comparison of energy conversion efficiencies. Nonlinear inorganic and organic crystals were used, and for the periodically-poled lithium niobate crystal, the efficiencies were 1.3*10^-4 and 5.6*10^-12 for the 3.3 μm source and the 1.5 μm source, respectively. We confirmed that nonlinear crystals could be pumped with tera-watt / cm^2 class by using an mid-infrared source, which reduces several undesirable nonlinear optical effects. △ Less

Submitted 17 February, 2021; originally announced February 2021.

Comments: 7 pages, 4figures

Computationally image-corrected dual-comb microscopy with a free-running single-cavity dual-comb fiber laser

Authors: Takahiko Mizuno, Yoshiaki Nakajima, Yuya Hata, Takuya Tsuda, Akifumi Asahara, Takashi Kato, Takeo Minamikawa, Takeshi Yasui, Kaoru Minoshima

Abstract: Dual-comb microscopy (DCM), an interesting imaging modality based on the optical-frequency-comb (OFC) mode and image pixel one-to-one correspondence, benefits from scan-less full-field imaging and simultaneous confocal amplitude and phase imaging. However, the two fully frequency-stabilized OFC sources requirement hampers DCM practicality due to the complexity and costs. Here, a bidirectional sing… ▽ More Dual-comb microscopy (DCM), an interesting imaging modality based on the optical-frequency-comb (OFC) mode and image pixel one-to-one correspondence, benefits from scan-less full-field imaging and simultaneous confocal amplitude and phase imaging. However, the two fully frequency-stabilized OFC sources requirement hampers DCM practicality due to the complexity and costs. Here, a bidirectional single-cavity dual-comb fiber laser (SCDCFL) is adopted as a DCM low-complexity OFC source. Computational image correction reduces the image blur caused by the SCDCFL residual timing jitter. Nanometer-order step surface profilometry with a 14.0 nm uncertainty highlights the image-corrected DCM effectiveness. The proposed method enhances the DCM versality and practicality. △ Less

Submitted 24 July, 2020; originally announced July 2020.

Comments: 25 pages, 7 figures

Journal ref: Optics Express, Vol. 29, Issue 4, pp. 5018-5032 (2021)

Scan-less full-field fluorescence-lifetime dual-comb microscopy using two-dimensional spectral map** and frequency multiplexing of dual-optical-comb beats

Authors: Takahiko Mizuno, Eiji Hase, Takeo Minamikawa, Yu Tokizane, Ryo Oe, Hidenori Koresawa, Hirotsugu Yamamoto, Takeshi Yasui

Abstract: Fluorescence lifetime imaging microscopy (FLIM) is a powerful tool for quantitative fluorescence imaging because fluorescence lifetime is independent of concentration of fluorescent molecules or excitation/detection efficiency and is robust to photobleaching. However, since FLIM is based on point-to-point measurements, mechanical scanning of a focal spot is needed for forming an image, which hampe… ▽ More Fluorescence lifetime imaging microscopy (FLIM) is a powerful tool for quantitative fluorescence imaging because fluorescence lifetime is independent of concentration of fluorescent molecules or excitation/detection efficiency and is robust to photobleaching. However, since FLIM is based on point-to-point measurements, mechanical scanning of a focal spot is needed for forming an image, which hampers rapid imaging. In this article, we demonstrate scan-less full-field FLIM based on a one-to-one correspondence between two-dimensional (2D) image pixels and frequency-multiplexed RF signals. A vast number of dual-optical-comb beats between dual optical frequency combs is effectively adopted for 2D spectral map** and high-density frequency multiplexing in radio-frequency region. Bimodal images of fluorescence amplitude and lifetime are obtained with high quantitativeness from amplitude and phase spectra of fluorescence RF comb modes without the need for mechanical scanning. The proposed method will be useful for rapid quantitative fluorescence imaging in life science. △ Less

Submitted 20 March, 2020; originally announced March 2020.

Comments: 38 pages, 8 figures, 1 table

Journal ref: Science Advances, Vol. 7, no. 1, eabd2102 (2021)

Generation of a microresonator soliton comb via current modulation of a DFB laser

Authors: Kenji Nishimoto, Kaoru Minoshima, Takeshi Yasui, Naoya Kuse

Abstract: Dissipative Kerr-microresonator soliton combs (hereafter called soliton combs) has been rapidly progressing as compact frequency combs. Comb mode scanning of the soliton combs with a large range and fast speed is of paramount importance for applications such as LiDAR and spectroscopy, requiring large and rapid frequency scanning of a pump continuous-wave (CW) laser as well as resonance frequency o… ▽ More Dissipative Kerr-microresonator soliton combs (hereafter called soliton combs) has been rapidly progressing as compact frequency combs. Comb mode scanning of the soliton combs with a large range and fast speed is of paramount importance for applications such as LiDAR and spectroscopy, requiring large and rapid frequency scanning of a pump continuous-wave (CW) laser as well as resonance frequency of a microresonator. Here, we demonstrate the generation of a soliton comb by a distributed feedback (DFB) laser toward the comb mode scanning with a large range and fast speed. Compared with conventional pump CW lasers (i.e. external cavity diode lasers: ECDLs), DFB lasers can be frequency-scanned more largely and rapidly without mode-hop**. In addition, because of the fast scan speed of the DFB laser, a single soliton comb is generated simply by controlling the injection current of the DFB laser, greatly simplifying the system without having any additional optical modulators such as a carrier-suppressed single-sideband modulator (CS-SSB modulator), acousto-optic modulator (AOM), and auxiliary CW laser. △ Less

Submitted 30 June, 2021; v1 submitted 30 January, 2020; originally announced February 2020.

Journal ref: OSA Continuum Vol. 3, Issue 11, pp. 3218-3224 (2020)

Optical image amplification in dual-comb microscopy by use of optical-fiber-amplified interferogram

Authors: Takahiko Mizuno, Takuya Tsuda, Eiji Hase, Yu Tokizane, Ryo Oe, Hidenori Koresawa, Hirotsugu Yamamoto, Takeo Minamikawa, Takeshi Yasui

Abstract: Dual-comb microscopy (DCM), based on a combination of dual-comb spectroscopy (DCS) with two-dimensional spectral encoding (2D-SE), is a promising method for scan-less confocal laser microscopy giving an amplitude and phase image contrast with the confocality. However, signal loss in a 2D-SE optical system hampers increase in image acquisition rate due to decreased signa-to-noise ratio. In this art… ▽ More Dual-comb microscopy (DCM), based on a combination of dual-comb spectroscopy (DCS) with two-dimensional spectral encoding (2D-SE), is a promising method for scan-less confocal laser microscopy giving an amplitude and phase image contrast with the confocality. However, signal loss in a 2D-SE optical system hampers increase in image acquisition rate due to decreased signa-to-noise ratio. In this article, we demonstrated optical image amplification in DCM with an erbium-doped fiber amplifier (EDFA). Combined use of image-encoded DCS interferogram and EDFA benefits from not only the batch amplification of amplitude and phase images but also significant rejection of amplified spontaneous emission (ASE) background. Effectiveness of the optical-image-amplified DCM is highlighted in the single-shot quantitative nanometer-order surface topography and the real-time movie of polystyrene beads dynamics under water convection. The proposed method will be a powerful tool for real-time observation of surface topography and fast dynamic phenomena. △ Less

Submitted 20 January, 2020; originally announced January 2020.

Comments: 20 pages, 6 figures

Journal ref: Scientific Reports Vol. 10, Art. 8338 (2020)

Comb-mode-resolved adaptive sampling terahertz dual-comb spectroscopy with a free-running single-cavity fiber laser

Authors: Jie Chen, Kazuki Nitta, Xin Zhao, Takahiko Mizuno, Takeo Minamikawa, Francis Hindle, Zheng Zheng, Takeshi Yasui

Abstract: Mode-resolved dual-comb spectroscopy (DCS) is an emerging spectroscopic tool with the potential to simultaneously achieve a broad spectral coverage and ultrahigh spectral resolution in terahertz (THz) spectroscopy. However, the need for two independently stabilized ultrafast lasers significantly hampers the potential application of DCS techniques. In this article, we demonstrate mode-resolved DCS… ▽ More Mode-resolved dual-comb spectroscopy (DCS) is an emerging spectroscopic tool with the potential to simultaneously achieve a broad spectral coverage and ultrahigh spectral resolution in terahertz (THz) spectroscopy. However, the need for two independently stabilized ultrafast lasers significantly hampers the potential application of DCS techniques. In this article, we demonstrate mode-resolved DCS in the THz region based on a free-running single-cavity dual-comb fiber laser with adaptive sampling. Low-pressure spectroscopy of acetonitrile gas with absorption features approaching the Doppler limit is demonstrated by comb-mode-resolved measurements with a spectral sampling spacing of 48.8 MHz, a spectral resolution of less than 5 MHz and a signal-to-noise ratio of ~50 dB. The successful demonstration of the proposed method clearly indicates the great potential for the realization of low-complexity, MHz-resolution THz spectroscopy instrumentation. △ Less

Submitted 2 August, 2019; originally announced August 2019.

Comments: 33 pages, 7 figures

Journal ref: Advanced Photonics, Vol. 2, Issue 3, art. 036004 (2020)

Refractive index sensing with temperature compensation by a multimode-interference fiber-based optical frequency comb sensing cavity

Authors: Ryo Oe, Takeo Minamikawa, Shuji Taue, Hidenori Koresawa, Takahiko Mizuno, Masatomo Yamagiwa, Yasuhiro Mizutani, Hirotsugu Yamamoto, Tetsuo Iwata, Takeshi Yasui

Abstract: We proposed a refractive index (RI) sensing method with temperature compensation by using an optical frequency comb (OFC) sensing cavity employing a multimode-interference (MMI) fiber, namely, the MMI-OFC sensing cavity. The MMI-OFC sensing cavity enables simultaneous measurement of material-dependent RI and sample temperature by decoding from the comb spacing frequency shift and the wavelength sh… ▽ More We proposed a refractive index (RI) sensing method with temperature compensation by using an optical frequency comb (OFC) sensing cavity employing a multimode-interference (MMI) fiber, namely, the MMI-OFC sensing cavity. The MMI-OFC sensing cavity enables simultaneous measurement of material-dependent RI and sample temperature by decoding from the comb spacing frequency shift and the wavelength shift of the OFC. We realized the simultaneous and continuous measurement of RI-related concentration of a liquid sample and its temperature with precisions of 1.6*10^-4 RIU and 0.08 degree. The proposed method would be a useful means for the various applications based on RI sensing. △ Less

Submitted 13 May, 2019; originally announced May 2019.

Comments: 22 pages

Journal ref: Opt. Express, Vol. 27, Issue 15, 21463-21476 (2019)

Lock-in-detection dual-comb spectroscopy

Authors: Hidenori Koresawa, Kyuki Shibuya, Takeo Minamikawa, Akifumi Asahara, Ryo Oe, Takahiko Mizuno, Masatomo Yamagiwa, Yasuhiro Mizutani, Tetsuo Iwata, Hirotsugu Yamamoto, Kaoru Minoshima, Takeshi Yasui

Abstract: Dual-comb spectroscopy (DCS) is useful for gas spectroscopy due to high potential of optical frequency comb (OFC). However, fast Fourier transform (FFT) calculation of a huge amount of temporal data spends significantly longer time than the acquisition time of an interferogram. In this article, we demonstrate frequency-domain DCS by a combination of DCS with lock-in detection, namely LID-DCS. LID-… ▽ More Dual-comb spectroscopy (DCS) is useful for gas spectroscopy due to high potential of optical frequency comb (OFC). However, fast Fourier transform (FFT) calculation of a huge amount of temporal data spends significantly longer time than the acquisition time of an interferogram. In this article, we demonstrate frequency-domain DCS by a combination of DCS with lock-in detection, namely LID-DCS. LID-DCS directly extracts an arbitrary OFC mode from a vast number of OFC modes without the need for FFT calculation. Usefulness of LID-DCS is demonstrated in rapid monitoring of transient signal change and spectroscopy of hydrogen cyanide gas. △ Less

Submitted 6 April, 2019; originally announced April 2019.

Comments: 28 Pages, 4 figures

Journal ref: OSA Continuum, Vol. 2, Issue 6 pp. 11998-2007 (2019)

Multicascade-linked synthetic wavelength digital holography using an optical-comb-referenced frequency synthesizer

Authors: Masatomo Yamagiwa, Takeo Minamikawa, Clément Trovato, Takayuki Ogawa, Dahi Ghareab Abdelsalam Ibrahim, Yusuke Kawahito, Ryo Oe, Kyuki Shibuya, Takahiko Mizuno, Emmanuel Abraham, Yasuhiro Mizutani, Tetsuo Iwata Hirotsugu Yamamoto, Kaoru Minoshima, Takeshi Yasui

Abstract: Digital holography (DH) is a promising method for non-contact surface topography because the reconstructed phase image can visualize the nanometer unevenness in a sample. However, the axial range of this method is limited to the range of the optical wavelength due to the phase wrap** ambiguity. Although the use of two different wavelengths of light and the resulting synthetic wavelength, i.e., s… ▽ More Digital holography (DH) is a promising method for non-contact surface topography because the reconstructed phase image can visualize the nanometer unevenness in a sample. However, the axial range of this method is limited to the range of the optical wavelength due to the phase wrap** ambiguity. Although the use of two different wavelengths of light and the resulting synthetic wavelength, i.e., synthetic wavelength DH, can expand the axial range up to a few tens of microns, this method is still insufficient for practical applications. In this article, a tunable external cavity laser diode phase-locked to an optical frequency comb, namely, an optical-comb-referenced frequency synthesizer, is effectively used for multiple synthetic wavelengths within the range of 32 um to 1.20 m. A multiple cascade link of the phase images among an optical wavelength (= 1.520 um) and 5 different synthetic wavelengths (= 32.39 um, 99.98 um, 400.0 um, 1003 um, and 4021 um) enables the shape measurement of a reflective millimeter-sized stepped surface with the axial resolution of 34 nm. The axial dynamic range, defined as the ratio of the maximum axial range (= 0.60 m) to the axial resolution (= 34 nm), achieves 1.7*10^8, which is much larger than that of previous synthetic wavelength DH. Such a wide axial dynamic range capability will further expand the application field of DH for large objects with meter dimensions. △ Less

Submitted 27 July, 2018; originally announced August 2018.

Comments: 19 pages, 7 figures

Journal ref: Opt. Express, Vol. 26, No. 20, pp. 26292-26306 (2018)

Refractive-index-sensing radio-frequency comb with intracavity multi-mode interference fibre sensor

Authors: Roy Oe, Shuji Taue, Takeo Minamikawa, Kosuke Nagai, Yasuhiro Mizutani, Tetsuo Iwata, Hirotsugu Yamamoto, Hideki Fukano, Yoshiaki Nakajima, Kaoru Minoshima, Takeshi Yasui

Abstract: Optical frequency combs have attracted attention as optical frequency rulers due to their tooth-like discrete spectra together with their inherent mode-locking nature and phase-locking control to a frequency standard. Based on this concept, their applications until now have been demonstrated in the fields of optical frequency metrology and optical distance metrology. However, if the utility of opt… ▽ More Optical frequency combs have attracted attention as optical frequency rulers due to their tooth-like discrete spectra together with their inherent mode-locking nature and phase-locking control to a frequency standard. Based on this concept, their applications until now have been demonstrated in the fields of optical frequency metrology and optical distance metrology. However, if the utility of optical combs can be further expanded beyond their optical-frequency-ruler-based application by exploiting new aspects of optical combs, this will lead to new developments in optical metrology and instrumentation. Here, we report a fibre sensing application of optical combs based on a coherent frequency link between the optical and radio-frequency regions, enabling high-precision refractive index measurement of a liquid sample based on frequency measurement in radio-frequency region. Our technique encodes a refractive index change of a liquid sample into a radio-frequency comb by a combination of an intracavity multi-mode-interference fibre sensor and wavelength dispersion of a cavity fibre. Then, the change in refractive index is read out by measuring the repetition frequency of the radio-frequency comb with a frequency counter and a frequency standard. Use of an optical comb as a photonic radio-frequency converter will lead to the development of new applications in high-precision fibre sensing with the help of functional fibre sensors and precise radio-frequency measurement. △ Less

Submitted 12 February, 2018; originally announced February 2018.

Comments: 20 pages, 6 figures

Journal ref: Optics Express Vol. 26, Issue 15, pp. 19694-19706 (2018)

Dual terahertz comb spectroscopy with a single free-running fibre laser

Authors: Guoqing Hu, Tatsuya Mizuguchi, Ryo Oe, Kazuki Nitta, Xin Zhao, Takeo Minamikawa, Ting Li, Zheng Zheng, Takeshi Yasui

Abstract: Dual THz comb spectroscopy has the potential to be used as universal THz spectroscopy with high spectral resolution, high spectral accuracy, and broad spectral coverage; however, the requirement for dual stabilized femtosecond lasers hampers its versatility due to the bulky size, high complexity, and high cost. We here report the first demonstration of dual THz comb spectroscopy using a single fre… ▽ More Dual THz comb spectroscopy has the potential to be used as universal THz spectroscopy with high spectral resolution, high spectral accuracy, and broad spectral coverage; however, the requirement for dual stabilized femtosecond lasers hampers its versatility due to the bulky size, high complexity, and high cost. We here report the first demonstration of dual THz comb spectroscopy using a single free-running fibre laser. By tuning the cavity-loss-dependent gain profile with an intracavity Lyot filter together with precise management of the cavity length and dispersion, dual-wavelength pulsed light beams with slightly detuned repetition frequencies are generated in a single laser cavity. Due to sharing of the same cavity, such pulsed light beams suffer from common-mode fluctuation of the repetition frequency, and hence the corresponding frequency difference between them is passively stable around a few hundred hertz within millihertz fluctuation. This considerably stable frequency difference enables dual THz comb spectroscopy with a single free-running fibre laser. While greatly reducing the size, complexity, and cost of the laser source by use of a single free-running fibre laser, the dual THz comb spectroscopy system maintains a spectral bandwidth and dynamic range of spectral power comparable to a system equipped with dual stabilized fibre lasers, and can be effectively applied to high-precision spectroscopy of acetonitrile gas at atmospheric pressure. The demonstrated results indicate that this system is an attractive solution for practical applications of not only THz spectroscopy but also THz-pulse-based measurements. △ Less

Submitted 28 January, 2018; originally announced February 2018.

Comments: 29 pages, 7 figures

Journal ref: Sci. Rep., Vol. 8, art. 11155 (2018)

Dual-optical-comb spectroscopic ellipsometry

Authors: Takeo Minamikawa, Yi-Da Hsieh, Kyuki Shibuya, Eiji Hase, Yoshiki Kaneoka, Sho Okubo, Hajime Inaba, Yasuhiro Mizutani, Hirotsugu Yamamoto, Tetsuo Iwata, Takeshi Yasui

Abstract: Spectroscopic ellipsometry is a means to investigate optical and dielectric material responses. Conventional spectroscopic ellipsometry has trade-offs between spectral accuracy, resolution, and measurement time. Polarization modulation has afforded poor performance due to its sensitivity to mechanical vibrational noise, thermal instability, and polarization wavelength dependency. We equip a spectr… ▽ More Spectroscopic ellipsometry is a means to investigate optical and dielectric material responses. Conventional spectroscopic ellipsometry has trade-offs between spectral accuracy, resolution, and measurement time. Polarization modulation has afforded poor performance due to its sensitivity to mechanical vibrational noise, thermal instability, and polarization wavelength dependency. We equip a spectroscopic ellipsometer with dual-optical-comb spectroscopy, viz. dual-optical-comb spectroscopic ellipsometry (DCSE). The DCSE directly and simultaneously obtains amplitude and phase information with ultra-high spectral precision that is beyond the conventional limit. This precision is due to the automatic time-swee** acquisition of the interferogram using Fourier transform spectroscopy and optical combs with well-defined frequency. Ellipsometric evaluation without polarization modulation also enhances the stability and robustness of the system. In this study, we evaluate the DCSE of birefringent materials and thin films, which showed improved spectral accuracy and a resolution of up to 1.2x10-5 nm across a 5-10 THz spectral bandwidth without any mechanical movement. △ Less

Submitted 30 May, 2017; originally announced June 2017.

Comments: 30 pages, 4 figures

Journal ref: Nature Communications 8, Article number: 610 (2017)

Scan-less confocal phase microscopy based on dual comb spectroscopy of two-dimensional-image-encoding optical frequency comb

Authors: Eiji Hase, Takeo Minamikawa, Shuji Miyamoto, Ryuji Ichikawa, Yi-Da Hsieh, Kyuki Shibuya, Yoshiaki Nakajima, Akifumi Asahara, Kaoru Minoshima, Yasuhiro Mizutani, Tetsuo Iwata, Hirotsugu Yamamoto, Takeshi Yasui

Abstract: Confocal imaging and phase imaging are powerful tools in life science research and industrial inspection. To coherently link the two techniques with different depth resolutions, we introduce an optical frequency comb (OFC) to microscopy. Two-dimensional (2D) image pixels of a sample were encoded onto OFC modes via 2D spectral encoding, in which OFC acted as an optical carrier with a vast number of… ▽ More Confocal imaging and phase imaging are powerful tools in life science research and industrial inspection. To coherently link the two techniques with different depth resolutions, we introduce an optical frequency comb (OFC) to microscopy. Two-dimensional (2D) image pixels of a sample were encoded onto OFC modes via 2D spectral encoding, in which OFC acted as an optical carrier with a vast number of discrete frequency channels. Then, a scan-less full-field confocal image with a depth resolution of 62.4 um was decoded from a mode-resolved OFC amplitude spectrum obtained by dual-comb spectroscopy. Furthermore, a phase image with a depth resolution of 13.7 nm was decoded from a mode-resolved OFC phase spectrum under the above confocality. The phase wrap** ambiguity can be removed by the match between the confocal depth resolution and the phase wrap** period. The proposed hybrid microscopy approach will be a powerful tool for a variety of applications. △ Less

Submitted 19 May, 2017; originally announced May 2017.

Comments: 32 page, 6 figures

Journal ref: Optica Vol. 5, Issue 5, pp. 634-643 (2018)

Scan-less hyperspectral dual-comb single-pixel-imaging in both amplitude and phase

Authors: Kyuki Shibuya, Takeo Minamikawa, Yasuhiro Mizutani, Hirotsugu Yamamoto, Kaoru Minoshima, Takeshi Yasui, Tetsuo Iwata

Abstract: We have developed a hyperspectral imaging scheme that involves a combination of dual-comb spectroscopy and Hadamard-transform-based single-pixel imaging. The scheme enables us to obtain 12,000 hyperspectral images of amplitude and phase at a spatial resolution of 46 um without mechanical scanning. The spectral resolution is 20 MHz, as determined by the linewidth of a single comb mode, and the spec… ▽ More We have developed a hyperspectral imaging scheme that involves a combination of dual-comb spectroscopy and Hadamard-transform-based single-pixel imaging. The scheme enables us to obtain 12,000 hyperspectral images of amplitude and phase at a spatial resolution of 46 um without mechanical scanning. The spectral resolution is 20 MHz, as determined by the linewidth of a single comb mode, and the spectral interval is 100 MHz over a spectral range of 1.2 THz centred at 191.5 THz. As an initial demonstration of our scheme, we obtained spectroscopic images of a standard test chart through an etalon plate. The thickness of an absorptive chromium-coated layer on a float-glass substrate was determined to be 70 nm from the hyperspectral phase images in the near-infrared wavelength region. △ Less

Submitted 5 May, 2017; originally announced May 2017.

Comments: 19 pages, 6figures

Journal ref: Optics Express Vol. 25, Issue 18, pp. 21947-21957 (2017)

Picometer-resolution dual-comb spectroscopy with a free-running fibre laser

Authors: Xin Zhao, Guoqing Hu, Bofeng Zhao, Cui Li, Yingling Pan, Ya Liu, Takeshi Yasui, Zheng Zheng

Abstract: Dual-comb spectroscopy utilizes two sets of comb lines with slightly different comb-tooth-spacings, and optical spectral information is acquired by measuring the radio-frequency beat notes between the sets of comb lines. It holds the promise as a real-time, high-resolution analytical spectroscopy tool for a range of applications. However, the stringent requirement on the coherence between comb lin… ▽ More Dual-comb spectroscopy utilizes two sets of comb lines with slightly different comb-tooth-spacings, and optical spectral information is acquired by measuring the radio-frequency beat notes between the sets of comb lines. It holds the promise as a real-time, high-resolution analytical spectroscopy tool for a range of applications. However, the stringent requirement on the coherence between comb lines from two separate lasers and the sophisticated control system to achieve that have confined the technology to the top metrology laboratories. By replacing control electronics with an all-optical dual-comb lasing scheme, a simplified dual-comb spectroscopy scheme is demonstrated using just one dual-wavelength, passively mode-locked fiber laser. Dual-comb pulses with a repetition-frequency difference determined by the intracavity dispersion are shown to be sufficiently stable against common-mode cavity drifts and noises. As sufficiently low relative linewidth is maintained between two sets of comb lines, capability to resolve RF beat notes between comb teeth and picometer-wide optical spectral features is demonstrated using a simple data acquisition and processing system in an all-fiber setup. Possibility to use energy-efficient, free-running fiber lasers with a small comb-tooth-spacing could enable the realization of low-cost dual-comb spectroscopy systems affordable to more applications. △ Less

Submitted 29 April, 2016; v1 submitted 24 February, 2016; originally announced February 2016.

Real-time absolute frequency measurement of continuous-wave terahertz wave based on dual terahertz combs of photocarriers with different frequency spacings

Authors: Takeshi Yasui, Kenta Hayashi, Ryuji Ichikawa, Harsono Cahyadi, Yi-Da Hsieh, Yasuhiro Mizutani, Hirotsugu Yamamoto, Tetsuo Iwata, Hajime Inaba, Kaoru Minoshima

Abstract: Real-time measurement of the absolute frequency of continuous-wave terahertz (CW-THz) waves is required for characterization and frequency calibration of practical CW-THz sources. We proposed a method for real-time monitoring of the absolute frequency of CW-THz waves involving temporally parallel, i.e., simultaneous, measurement of two pairs of beat frequencies and laser repetition frequencies bas… ▽ More Real-time measurement of the absolute frequency of continuous-wave terahertz (CW-THz) waves is required for characterization and frequency calibration of practical CW-THz sources. We proposed a method for real-time monitoring of the absolute frequency of CW-THz waves involving temporally parallel, i.e., simultaneous, measurement of two pairs of beat frequencies and laser repetition frequencies based on dual THz combs of photocarriers (PC-THz combs) with different frequency spacings. To demonstrate the method, THz-comb-referenced spectrum analyzers were constructed with a dual configuration based on dual femtosecond lasers. Regardless of the presence or absence of frequency control in the PC-THz combs, a frequency precision of 10-11 was achieved at a measurement rate of 100 Hz. Furthermore, large fluctuation of the CW-THz frequencies, crossing several modes of the PC-THz combs, was correctly monitored in real time. The proposed method will be a powerful tool for the research and development of practical CW-THz sources, and other applications. △ Less

Submitted 25 January, 2015; originally announced January 2015.

Comments: 27 pages

Journal ref: Optics Express, Vol. 23, Issue 9, pp. 11367-11377 (2015)

Adaptive sampling dual terahertz comb spectroscopy using free-running dual femtosecond lasers

Authors: Takeshi Yasui, Ryuji Ichikawa, Yi-Da Hsieh, Kenta Hayashi, Harsono Cahyadi, Francis Hindle, Yoshiyuki Sakaguchi, Tetsuo Iwata, Yasuhiro Mizutani, Hirotsugu Yamamoto, Kaoru Minoshima, Hajime Inaba

Abstract: Dual terahertz (THz) comb spectroscopy is a promising methods for high accuracy, high resolution, and broadband THz spectroscopy because the mode-resolved THz comb spectrum possesses both characteristics of broadband THz radiation and narrow-linewidth continuous-wave THz radiation and all frequency mode of THz comb can be phase-locked to a microwave frequency standard. However, requirement of stab… ▽ More Dual terahertz (THz) comb spectroscopy is a promising methods for high accuracy, high resolution, and broadband THz spectroscopy because the mode-resolved THz comb spectrum possesses both characteristics of broadband THz radiation and narrow-linewidth continuous-wave THz radiation and all frequency mode of THz comb can be phase-locked to a microwave frequency standard. However, requirement of stabilized dual femtosecond lasers has often hindered wide use of this method. In this article, we demonstrated the adaptive sampling, dual THz comb spectroscopy, enabling use of free-running dual femtosecond lasers. To correct the non-linearity of time and frequency scale caused by the laser timing jitter, an adaptive sampling clock is generated by dual THz-comb-referenced spectrum analysers and is used for a timing signal in a data acquisition board. The demonstrated results did not only indicate the implementation of dual THz comb spectroscopy with free-running dual lasers but also implied the superiority of its spectroscopic performance over the dual THz comb spectroscopy with stabilized dual lasers. △ Less

Submitted 11 December, 2014; originally announced December 2014.

Comments: 28 pages, 6 figures

Journal ref: Scientific Reports 5, art. 10786 (2015)

Super-resolution discrete-Fourier-transform spectroscopy using precisely periodic radiation beyond time window size limitation

Authors: Takeshi Yasui, Yuki Iyonaga, Yi-Da Hsieh, Yoshiyuki Sakaguchi, Francis Hindle, Shuko Yokoyama, Tsutomu Araki, Mamoru Hashimoto

Abstract: Fourier transform spectroscopy (FTS) has been widely used in a variety of fields in research, industry, and medicine due to its high signal-to-noise ratio, simultaneous acquisition of signals in a broad spectrum, and versatility for different radiation sources. Further improvement of the spectroscopic performance will widen its scope of applications. Here, we demonstrate improved spectral resoluti… ▽ More Fourier transform spectroscopy (FTS) has been widely used in a variety of fields in research, industry, and medicine due to its high signal-to-noise ratio, simultaneous acquisition of signals in a broad spectrum, and versatility for different radiation sources. Further improvement of the spectroscopic performance will widen its scope of applications. Here, we demonstrate improved spectral resolution by overcoming the time window limitation using discrete Fourier transform spectroscopy (dFTS) with precisely periodic pulsed terahertz (THz) radiation. Since infinitesimal resolution can be achieved at periodically discrete frequencies when the time window size is exactly matched to the repetition period T, a combination of THz-dFTS with a spectral interleaving technique achieves a spectral resolution only limited by the spectral interleaving interval. Linewidths narrower than 1/(50T) are fully resolved allowing the attribution of rotational-transition absorption lines of low-pressure molecular gases within a 1.25 MHz band. The proposed method represents a powerful tool to improve spectrometer performance and accelerate the practical use of various types of FTS. △ Less

Submitted 11 December, 2014; originally announced December 2014.

Comments: 26 pages, 5 figures

Journal ref: Optica Vol. 2, Issue 5, pp. 460-467 (2015)

Gapless dual-comb spectroscopy in terahertz region

Authors: Takeshi Yasui, Yi-Da Hsieh, Yuki Iyonaga, Yoshiyuki Sakaguchi, Shuko Yokoyama, Hajime Inaba, Kaoru Minoshima, Francis Hindle, Tsutomu Araki

Abstract: We demonstrated combination of gapless terahertz (THz) comb with dual-comb spectroscopy, namely gapless dual-THz-comb spectroscopy, to achieve the spectral resolution equal to width of the THz comb tooth. The gapless THz comb was realized by interpolating frequency gaps between the comb teeth with swee** of a laser mode-locked frequency. The demonstration of low-pressure gas spectroscopy with ga… ▽ More We demonstrated combination of gapless terahertz (THz) comb with dual-comb spectroscopy, namely gapless dual-THz-comb spectroscopy, to achieve the spectral resolution equal to width of the THz comb tooth. The gapless THz comb was realized by interpolating frequency gaps between the comb teeth with swee** of a laser mode-locked frequency. The demonstration of low-pressure gas spectroscopy with gapless dual-THz-comb spectroscopy clearly indicated that the spectral resolution was decreased down to 2.5-MHz width of the comb tooth and the spectral accuracy was enhanced to 10-6 within the spectral range of 1THz. The proposed method will be a powerful tool to simultaneously achieve high resolution, high accuracy, and broad spectral coverage in THz spectroscopy. △ Less

Submitted 22 March, 2013; originally announced March 2013.

Comments: 12 pages, 4 figures

Journal ref: Sci. Rep. 4 (2014) 3816