-
A MgNO Method for Multiphase Flow in Porous Media
Authors:
Xinliang Liu,
Xia Yang,
Chen-Song Zhang,
Lian Zhang,
Li Zhao
Abstract:
This research investigates the application of Multigrid Neural Operator (MgNO), a neural operator architecture inspired by multigrid methods, in the simulation for multiphase flow within porous media. The architecture is adjusted to manage a variety of crucial factors, such as permeability and porosity heterogeneity. The study extendes MgNO to time-dependent porous media flow problems and validate…
▽ More
This research investigates the application of Multigrid Neural Operator (MgNO), a neural operator architecture inspired by multigrid methods, in the simulation for multiphase flow within porous media. The architecture is adjusted to manage a variety of crucial factors, such as permeability and porosity heterogeneity. The study extendes MgNO to time-dependent porous media flow problems and validate its accuracy in predicting essential aspects of multiphase flows. Furthermore, the research provides a detailed comparison between MgNO and Fourier Neural Opeartor (FNO), which is one of the most popular neural operator methods, on their performance regarding prediction error accumulation over time. This aspect provides valuable insights into the models' long-term predictive stability and reliability. The study demonstrates MgNO's capability to effectively simulate multiphase flow problems, offering considerable time savings compared to traditional simulation methods, marking an advancement in integrating data-driven methodologies in geoscience applications.
△ Less
Submitted 16 June, 2024;
originally announced July 2024.
-
Dedicated beam position monitor pair for model-independent lattice characterization at NSLS-II
Authors:
Yongjun Li,
Kiman Ha,
Danny Padrazo,
Bernard Kosciuk,
Belkacem Bacha,
Michael Seegitz,
Robert Rainer,
Joseph Mead,
Xi Yang,
Yuke Tian,
Robert Todd,
Victor Smaluk,
Weixing Cheng
Abstract:
This paper reports recent lattice characterization results obtained at the National Synchrotron Light Source II (NSLS-II) storage ring, conducted without reliance on a lattice model. A pair of beam position monitors (BPMs) with bunch-by-bunch (B$\times$B) resolution, were recently installed in a section of the storage ring free of magnetic fields. The new BPM pair measured the beam, or bunch's tra…
▽ More
This paper reports recent lattice characterization results obtained at the National Synchrotron Light Source II (NSLS-II) storage ring, conducted without reliance on a lattice model. A pair of beam position monitors (BPMs) with bunch-by-bunch (B$\times$B) resolution, were recently installed in a section of the storage ring free of magnetic fields. The new BPM pair measured the beam, or bunch's transverse Poincaré map precisely after the beam was excited. Linear one-turn-matrices (OTM) were then derived, and from these, the 4-dimensional coupled Twiss parameters were extracted at the locations of the BPM pair. By normalizing beam oscillation amplitudes with the Twiss parameters, the global action-variables were obtained. These action-variables facilitated the measurement of the local Twiss parameters observed by other BPMs independent on lattice model. This method is general, and particularly useful in certain scenarios such as a round beam mode in a diffraction-limited light source ring. We applied it to assess both weakly and strongly coupled lattices at the NSLS-II ring. Through analysis of the strongly coupled lattice, the quadrupole tilt errors were estimated to be less than 400 \siμrad. Utilizing the BPMs' B$\times$B resolution, for the first time we observed the variations of the linear lattice along a long bunch-train.
△ Less
Submitted 24 June, 2024;
originally announced June 2024.
-
Unsupervised Bayesian Generation of Synthetic CT from CBCT Using Patient-Specific Score-Based Prior
Authors:
Junbo Peng,
Yuan Gao,
Chih-Wei Chang,
Richard Qiu,
Tonghe Wang,
Aparna Kesarwala,
Kailin Yang,
Jacob Scott,
David Yu,
Xiaofeng Yang
Abstract:
Background: Cone-beam computed tomography (CBCT) scans, performed fractionally (e.g., daily or weekly), are widely utilized for patient alignment in the image-guided radiotherapy (IGRT) process, thereby making it a potential imaging modality for the implementation of adaptive radiotherapy (ART) protocols. Nonetheless, significant artifacts and incorrect Hounsfield unit (HU) values hinder their app…
▽ More
Background: Cone-beam computed tomography (CBCT) scans, performed fractionally (e.g., daily or weekly), are widely utilized for patient alignment in the image-guided radiotherapy (IGRT) process, thereby making it a potential imaging modality for the implementation of adaptive radiotherapy (ART) protocols. Nonetheless, significant artifacts and incorrect Hounsfield unit (HU) values hinder their application in quantitative tasks such as target and organ segmentations and dose calculation. Therefore, acquiring CT-quality images from the CBCT scans is essential to implement online ART in clinical settings.
Purpose: This work aims to develop an unsupervised learning method using the patient-specific diffusion model for CBCT-based synthetic CT (sCT) generation to improve the image quality of CBCT.
Methods: The proposed method is in an unsupervised framework that utilizes a patient-specific score-based model as the image prior alongside a customized total variation (TV) regularization to enforce coherence across different transverse slices. The score-based model is unconditionally trained using the same patient's planning CT (pCT) images to characterize the manifold of CT-quality images and capture the unique anatomical information of the specific patient. The efficacy of the proposed method was assessed on images from anatomical sites including head and neck (H&N) cancer, pancreatic cancer, and lung cancer. The performance of the proposed CBCT correction method was evaluated using quantitative metrics including mean absolute error (MAE), peak signal-to-noise ratio (PSNR), and normalized cross-correlation (NCC). Additionally, the proposed algorithm was benchmarked against two other unsupervised diffusion model-based CBCT correction algorithms.
△ Less
Submitted 21 June, 2024;
originally announced June 2024.
-
An insertable glucose sensor using a compact and cost-effective phosphorescence lifetime imager and machine learning
Authors:
Artem Goncharov,
Zoltan Gorocs,
Ridhi Pradhan,
Brian Ko,
Ajmal Ajmal,
Andres Rodriguez,
David Baum,
Marcell Veszpremi,
Xilin Yang,
Maxime Pindrys,
Tianle Zheng,
Oliver Wang,
Jessica C. Ramella-Roman,
Michael J. McShane,
Aydogan Ozcan
Abstract:
Optical continuous glucose monitoring (CGM) systems are emerging for personalized glucose management owing to their lower cost and prolonged durability compared to conventional electrochemical CGMs. Here, we report a computational CGM system, which integrates a biocompatible phosphorescence-based insertable biosensor and a custom-designed phosphorescence lifetime imager (PLI). This compact and cos…
▽ More
Optical continuous glucose monitoring (CGM) systems are emerging for personalized glucose management owing to their lower cost and prolonged durability compared to conventional electrochemical CGMs. Here, we report a computational CGM system, which integrates a biocompatible phosphorescence-based insertable biosensor and a custom-designed phosphorescence lifetime imager (PLI). This compact and cost-effective PLI is designed to capture phosphorescence lifetime images of an insertable sensor through the skin, where the lifetime of the emitted phosphorescence signal is modulated by the local concentration of glucose. Because this phosphorescence signal has a very long lifetime compared to tissue autofluorescence or excitation leakage processes, it completely bypasses these noise sources by measuring the sensor emission over several tens of microseconds after the excitation light is turned off. The lifetime images acquired through the skin are processed by neural network-based models for misalignment-tolerant inference of glucose levels, accurately revealing normal, low (hypoglycemia) and high (hyperglycemia) concentration ranges. Using a 1-mm thick skin phantom mimicking the optical properties of human skin, we performed in vitro testing of the PLI using glucose-spiked samples, yielding 88.8% inference accuracy, also showing resilience to random and unknown misalignments within a lateral distance of ~4.7 mm with respect to the position of the insertable sensor underneath the skin phantom. Furthermore, the PLI accurately identified larger lateral misalignments beyond 5 mm, prompting user intervention for re-alignment. The misalignment-resilient glucose concentration inference capability of this compact and cost-effective phosphorescence lifetime imager makes it an appealing wearable diagnostics tool for real-time tracking of glucose and other biomarkers.
△ Less
Submitted 11 June, 2024;
originally announced June 2024.
-
Enabling Large-Scale and High-Precision Fluid Simulations on Near-Term Quantum Computers
Authors:
Zhao-Yun Chen,
Teng-Yang Ma,
Chuang-Chao Ye,
Liang Xu,
Ming-Yang Tan,
Xi-Ning Zhuang,
Xiao-Fan Xu,
Yun-Jie Wang,
Tai-** Sun,
Yong Chen,
Lei Du,
Liang-Liang Guo,
Hai-Feng Zhang,
Hao-Ran Tao,
Tian-Le Wang,
Xiao-Yan Yang,
Ze-An Zhao,
Peng Wang,
Sheng Zhang,
Chi Zhang,
Ren-Ze Zhao,
Zhi-Long Jia,
Wei-Cheng Kong,
Meng-Han Dou,
Jun-Chao Wang
, et al. (7 additional authors not shown)
Abstract:
Quantum computational fluid dynamics (QCFD) offers a promising alternative to classical computational fluid dynamics (CFD) by leveraging quantum algorithms for higher efficiency. This paper introduces a comprehensive QCFD method, including an iterative method "Iterative-QLS" that suppresses error in quantum linear solver, and a subspace method to scale the solution to a larger size. We implement o…
▽ More
Quantum computational fluid dynamics (QCFD) offers a promising alternative to classical computational fluid dynamics (CFD) by leveraging quantum algorithms for higher efficiency. This paper introduces a comprehensive QCFD method, including an iterative method "Iterative-QLS" that suppresses error in quantum linear solver, and a subspace method to scale the solution to a larger size. We implement our method on a superconducting quantum computer, demonstrating successful simulations of steady Poiseuille flow and unsteady acoustic wave propagation. The Poiseuille flow simulation achieved a relative error of less than $0.2\%$, and the unsteady acoustic wave simulation solved a 5043-dimensional matrix. We emphasize the utilization of the quantum-classical hybrid approach in applications of near-term quantum computers. By adapting to quantum hardware constraints and offering scalable solutions for large-scale CFD problems, our method paves the way for practical applications of near-term quantum computers in computational science.
△ Less
Submitted 19 June, 2024; v1 submitted 10 June, 2024;
originally announced June 2024.
-
Emergence of topological states in relaxation dynamics of interacting bosons
Authors:
Wang Huang,
Xuchen Yang,
Rui Cao,
Yinghai Wu,
Jianmin Yuan,
Yongqiang Li
Abstract:
Topological concepts have been employed to understand the ground states of many strongly correlated systems, but it is still quite unclear if and how topology manifests itself in the relaxation dynamics. Here we uncover emergent topological phenomena in the time evolution of far-from-equilibrium one-dimensional interacting bosons. Beginning with simple product states, the system evolves into long-…
▽ More
Topological concepts have been employed to understand the ground states of many strongly correlated systems, but it is still quite unclear if and how topology manifests itself in the relaxation dynamics. Here we uncover emergent topological phenomena in the time evolution of far-from-equilibrium one-dimensional interacting bosons. Beginning with simple product states, the system evolves into long-time stationary states with high energy that are nonthermal for a wide range of parameters, and they exhibit nonlocal string correlation that is characteristic of the symmetry-protected topological ground state of the Hamiltonian. In contrast, no topological feature is found in the stationary state as long as the system thermalizes. This difference is further corroborated by the distinct behaviour of quantum entanglement and edge states of the system. Our theoretical prediction can be examined by current experimental techniques and paves the way for a more comprehensive understanding of topological phases in nonequilibrium settings.
△ Less
Submitted 6 June, 2024;
originally announced June 2024.
-
Quantum erasure based on phase structure
Authors:
Ye Yang,
Chengyuan Wang,
Yun Chen,
Jianyi Xv,
Xin Yang,
**wen Wang,
Shuwei Qiu,
Hong Gao,
Fuli Li
Abstract:
The quantum eraser effect exemplifies the distinct properties of quantum mechanics that challenge classical intuition and expose the wave-particle duality of light. This effect has been extensively explored in various experiments; most of these investigations use polarisation to distinguish which path information, and less attention has been paid to the phase structure which is related wavefront o…
▽ More
The quantum eraser effect exemplifies the distinct properties of quantum mechanics that challenge classical intuition and expose the wave-particle duality of light. This effect has been extensively explored in various experiments; most of these investigations use polarisation to distinguish which path information, and less attention has been paid to the phase structure which is related wavefront of photon. In this study, we introduce a theoretical framework for quantum erasure that focusses on the phase structure and demonstrate it experimentally. In this experiment, we employ a Mach-Zehnder interferometer (MZI) where a first-order spiral phase plate (SPP) is integrated into one of its arms. This setup applied orbital angular momentum (OAM) to the photons and established predetermined which-way information. Consequently, the photon demonstrates its particle characteristics, with absence of interference at the MZI's output ports. Utilizing an additional SPP to erase the phase structure from the output photon results in pronounced interference patterns, observable in a post-measurement scenario. This result allows us to include the structure information of the equiphase plane of the light field in quantum erasure. The results challenge the traditional cause-effect relationship in classical physics, given that the subsequent choice of the SPP adheres to a space-like separation.
△ Less
Submitted 18 May, 2024;
originally announced June 2024.
-
Using Modularized Pin Ridge Filter in Proton FLASH Planning for Liver Stereotactic Ablative Body Radiotherapy
Authors:
Chaoqiong Ma,
Xiaofeng Yang,
Yinan Wang,
David Yu,
Pretesh Patel,
Jun Zhou
Abstract:
We previously developed a FLASH planning framework for streamlined pin-ridge-filter (pin-RF) design, demonstrating its feasibility for single-energy proton FLASH planning. In this study, we refined the pin-RF design for easy assembly using reusable modules, focusing on its application in liver SABR. This framework generates an intermediate IMPT plan and translates it into step widths and thickness…
▽ More
We previously developed a FLASH planning framework for streamlined pin-ridge-filter (pin-RF) design, demonstrating its feasibility for single-energy proton FLASH planning. In this study, we refined the pin-RF design for easy assembly using reusable modules, focusing on its application in liver SABR. This framework generates an intermediate IMPT plan and translates it into step widths and thicknesses of pin-RFs for a single-energy FLASH plan. Parameters like energy spacing, monitor unit limit, and spot quantity were adjusted during IMPT planning, resulting in pin-RFs assembled using predefined modules with widths from 1 to 6 mm, each with a WET of 5 mm. This approach was validated on three liver SABR cases. FLASH doses, quantified using the FLASH effectiveness model at 1 to 5 Gy thresholds, were compared to conventional IMPT (IMPT-CONV) doses to assess clinical benefits. The highest demand for 6 mm width modules, moderate for 2-4 mm, and minimal for 1- and 5-mm modules were shown across all cases. At lower dose thresholds, the two-beam case showed significant dose reductions (>23%), while the other two three-beam cases showed moderate reductions (up to 14.7%), indicating the need for higher fractional beam doses for an enhanced FLASH effect. Positive clinical benefits were seen only in the two-beam case at the 5 Gy threshold. At the 1 Gy threshold, the FLASH plan of the two-beam case outperformed its IMPT-CONV plan, reducing dose indicators by up to 28.3%. However, the three-beam cases showed negative clinical benefits at the 1 Gy threshold, with some dose indicators increasing by up to 16% due to lower fractional beam doses and closer beam arrangements. This study evaluated the feasibility of modularizing streamlined pin-RFs in single-energy proton FLASH planning for liver SABR, offering guidance on optimal module composition and strategies to enhance FLASH planning.
△ Less
Submitted 4 June, 2024;
originally announced June 2024.
-
A Study of the Latest Updates of the Readout System for the Hybird-Pixel Detector at HEPS
Authors:
Hangxu Li,
Jie Zhang,
Wei Wei,
Zhenjie Li,
Xiaolu Ji,
Yan Zhang,
Xuanzheng Yang,
Shuihan Zhang,
Xueke Ma,
Peng Liu,
Zheng Wang,
Yuanbai Chen
Abstract:
The High Energy Photon Source (HEPS) represents a fourth-generation light source. This facility has made unprecedented advancements in accelerator technology, necessitating the development of new detectors to satisfy physical requirements such as single-photon resolution, large dynamic range, and high frame rates. Since 2016, the Institute of High Energy Physics has introduced the first user-exper…
▽ More
The High Energy Photon Source (HEPS) represents a fourth-generation light source. This facility has made unprecedented advancements in accelerator technology, necessitating the development of new detectors to satisfy physical requirements such as single-photon resolution, large dynamic range, and high frame rates. Since 2016, the Institute of High Energy Physics has introduced the first user-experimental hybrid pixel detector, progressing to the fourth-generation million-pixel detector designed for challenging conditions, with the dual-threshold single-photon detector HEPS-Bei**g PIXel (HEPS-BPIX) set as the next-generation target. HEPS-BPIX will employ the entirely new Application-Specific Integrated Circuit (ASIC) BP40 for pixel information readout. Data flow will be managed and controlled through readout electronics based on a two-tier Field-Programmable Gate Array (FPGA) system: the Front-End Electronics (FEE) and the Input-Output Board (IOB) handle the fan-out for 12 ASICs, and the u4FCP is tasked with processing serial data on high-speed links, transferring pixel-level data to the back-end RTM and uTCA chassis, or independently outputting through a network port, enabling remote control of the entire detector. The new HEPS-BPIX firmware has undergone a comprehensive redesign and update to meet the electronic characteristics of the new chip and to improve the overall performance of the detector. We provide an overview of the core subunits of HEPS-BPIX, emphasizing the readout system, evaluating the new hardware and firmware, and highlighting some of its innovative features and characteristics.
△ Less
Submitted 4 June, 2024;
originally announced June 2024.
-
End-to-End Hybrid Refractive-Diffractive Lens Design with Differentiable Ray-Wave Model
Authors:
Xinge Yang,
Matheus Souza,
Kunyi Wang,
Praneeth Chakravarthula,
Qiang Fu,
Wolfgang Heidrich
Abstract:
Hybrid refractive-diffractive lenses combine the light efficiency of refractive lenses with the information encoding power of diffractive optical elements (DOE), showing great potential as the next generation of imaging systems. However, accurately simulating such hybrid designs is generally difficult, and in particular, there are no existing differentiable image formation models for hybrid lenses…
▽ More
Hybrid refractive-diffractive lenses combine the light efficiency of refractive lenses with the information encoding power of diffractive optical elements (DOE), showing great potential as the next generation of imaging systems. However, accurately simulating such hybrid designs is generally difficult, and in particular, there are no existing differentiable image formation models for hybrid lenses with sufficient accuracy.
In this work, we propose a new hybrid ray-tracing and wave-propagation (ray-wave) model for accurate simulation of both optical aberrations and diffractive phase modulation, where the DOE is placed between the last refractive surface and the image sensor, i.e. away from the Fourier plane that is often used as a DOE position. The proposed ray-wave model is fully differentiable, enabling gradient back-propagation for end-to-end co-design of refractive-diffractive lens optimization and the image reconstruction network. We validate the accuracy of the proposed model by comparing the simulated point spread functions (PSFs) with theoretical results, as well as simulation experiments that show our model to be more accurate than solutions implemented in commercial software packages like Zemax. We demonstrate the effectiveness of the proposed model through real-world experiments and show significant improvements in both aberration correction and extended depth-of-field (EDoF) imaging. We believe the proposed model will motivate further investigation into a wide range of applications in computational imaging, computational photography, and advanced optical design. Code will be released upon publication.
△ Less
Submitted 2 June, 2024;
originally announced June 2024.
-
Realization of type-II double-zero-index photonic crystals
Authors:
Zebin Zhu,
Dong Zhao,
Ziyao Wang,
Xucheng Yang,
Liyong Jiang,
Zhen Gao
Abstract:
Some photonic crystals (PCs) with Dirac-like conical dispersions exhibit the property of double zero refractive index (that is, both epsilon and mu near zero (EMNZ)), wherein the electromagnetic waves have an infinite effective wavelength and do not experience any spatial phase change. The Dirac-like cones that support EMNZ are previously thought to present only at the center of the Brillouin zone…
▽ More
Some photonic crystals (PCs) with Dirac-like conical dispersions exhibit the property of double zero refractive index (that is, both epsilon and mu near zero (EMNZ)), wherein the electromagnetic waves have an infinite effective wavelength and do not experience any spatial phase change. The Dirac-like cones that support EMNZ are previously thought to present only at the center of the Brillouin zone ($Γ$ point) with a zero wavevector (we refer to as type-I EMNZ), which is constrained by the proportional relationship between phase refractive index and wavevector ($n=kc/ω$). Here, we demonstrate the existence of an anomalous type-II EMNZ in PCs, which is associated with the Dirac-like point at off-$Γ$ points. By introducing a wave modulation approach, we theoretically elucidate its physical mechanism, and resolve the paradox of type-II EMNZ with non-zero wavevectors. We then fabricate a type-II EMNZ PC operating at the X point, and experimentally demonstrate that both its effective permittivity and permeability are zero at the Dirac-like point. Type-II EMNZ PCs exhibit a range of intriguing phenomena, including angle-selective transmission, wavefront flattening, a 180$^{\circ}$ phase shift upon transmission, and waveguiding with natural zero radiation loss. The extraordinary properties of type-II EMNZ PCs may open new avenues for the development of angle-selective optical filters, directional light sources, phase-controlled optical switches, ultracompact photonic circuits, nanolasers, and on-chip nonlinear enhancement.
△ Less
Submitted 1 June, 2024;
originally announced June 2024.
-
Refractive index in the JUNO liquid scintillator
Authors:
H. S. Zhang,
M. Beretta,
S. Cialdi,
C. X. Yang,
J. H. Huang,
F. Ferraro,
G. F. Cao,
G. Reina,
Z. Y. Deng,
E. Suerra,
S. Altilia,
V. Antonelli,
D. Basilico,
A. Brigatti,
B. Caccianiga,
M. G. Giammarchi,
C. Landini,
P. Lombardi,
L. Miramonti,
E. Percalli,
G. Ranucci,
A. C. Re,
P. Saggese,
M. D. C. Torri,
S. Aiello
, et al. (51 additional authors not shown)
Abstract:
In the field of rare event physics, it is common to have huge masses of organic liquid scintillator as detection medium. In particular, they are widely used to study neutrino properties or astrophysical neutrinos. Thanks to its safety properties (such as low toxicity and high flash point) and easy scalability, linear alkyl benzene is the most common solvent used to produce liquid scintillators for…
▽ More
In the field of rare event physics, it is common to have huge masses of organic liquid scintillator as detection medium. In particular, they are widely used to study neutrino properties or astrophysical neutrinos. Thanks to its safety properties (such as low toxicity and high flash point) and easy scalability, linear alkyl benzene is the most common solvent used to produce liquid scintillators for large mass experiments. The knowledge of the refractive index is a pivotal point to understand the detector response, as this quantity (and its wavelength dependence) affects the Cherenkov radiation and photon propagation in the medium. In this paper, we report the measurement of the refractive index of the JUNO liquid scintillator between 260-1064 nm performed with two different methods (an ellipsometer and a refractometer), with a sub percent level precision. In addition, we used an interferometer to measure the group velocity in the JUNO liquid scintillator and verify the expected value derived from the refractive index measurements.
△ Less
Submitted 30 May, 2024;
originally announced May 2024.
-
A rapid approach to urban traffic noise map** with a generative adversarial network
Authors:
Xinhao Yang,
Zhen Han,
Xiaodong Lu,
Yuan Zhang
Abstract:
With rapid urbanisation and the accompanying increase in traffic density, traffic noise has become a major concern in urban planning. However, traditional grid noise map** methods have limitations in terms of time consumption, software costs, and a lack of parameter integration interfaces. These limitations hinder their ability to meet the need for iterative updates and rapid performance feedbac…
▽ More
With rapid urbanisation and the accompanying increase in traffic density, traffic noise has become a major concern in urban planning. However, traditional grid noise map** methods have limitations in terms of time consumption, software costs, and a lack of parameter integration interfaces. These limitations hinder their ability to meet the need for iterative updates and rapid performance feedback in the early design stages of street-scale urban planning. Herein, we developed a rapid urban traffic noise map** technique that leverages generative adversarial networks (GANs) as a surrogate model. This approach enables the rapid assessment of urban traffic noise distribution by using urban elements such as roads and buildings as the input. The mean values for the mean squared error (MSE) and structural similarity index (SSIM) are 0.0949 and 0.8528, respectively, for the validation dataset. Hence, our prediction accuracy is on par with that of conventional prediction software. Furthermore, the trained model is integrated into Grasshopper as a tool, facilitating the rapid generation of traffic noise maps. This integration allows urban designers and planners, even those without expertise in acoustics, to easily anticipate changes in acoustics impacts caused by design.
△ Less
Submitted 21 May, 2024;
originally announced May 2024.
-
Data quality control system and long-term performance monitor of the LHAASO-KM2A
Authors:
Zhen Cao,
F. Aharonian,
Axikegu,
Y. X. Bai,
Y. W. Bao,
D. Bastieri,
X. J. Bi,
Y. J. Bi,
W. Bian,
A. V. Bukevich,
Q. Cao,
W. Y. Cao,
Zhe Cao,
J. Chang,
J. F. Chang,
A. M. Chen,
E. S. Chen,
H. X. Chen,
Liang Chen,
Lin Chen,
Long Chen,
M. J. Chen,
M. L. Chen,
Q. H. Chen,
S. Chen
, et al. (263 additional authors not shown)
Abstract:
The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To…
▽ More
The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively.
△ Less
Submitted 13 June, 2024; v1 submitted 20 May, 2024;
originally announced May 2024.
-
Scanning Acoustic Microscopy for Quantifying Two-phase Transfer in Operando Alkaline Water Electrolyzer
Authors:
Zehua Dou,
Hannes Rox,
Zyzi Ramos,
Robert Baumann,
Rachappa Ravishankar,
Peter Czurratis,
Xuegeng Yang,
Andrés Fabian Lasagni,
Kerstin Eckert,
Juergen Czarske,
David Weik
Abstract:
Improved understandings of two-phase transport in electrochemical gas-evolving systems are increasingly demanded, while high-performance imaging techniques using simplified instrumentations are not readily available. This work presents volumetric scanning acoustic microscopy (SAM) imaging for quantifying the dynamics of gas bubbles and electrolyte in porous Nickel electrodes with different wettabi…
▽ More
Improved understandings of two-phase transport in electrochemical gas-evolving systems are increasingly demanded, while high-performance imaging techniques using simplified instrumentations are not readily available. This work presents volumetric scanning acoustic microscopy (SAM) imaging for quantifying the dynamics of gas bubbles and electrolyte in porous Nickel electrodes with different wettability and structures during alkaline water electrolysis (AWE). We realize high-resolution 3D imaging at 10's um level using high frequency spherically focused ultrasound. The high resolution allowed us to clearly visualize the spatial distributions of produced bubbles in the porous electrodes over time. Moreover, we are able to quantify the residual gas volume in an electrode and its coverage due to bubble evolution, which dominate its transport overpotential. Taking these advantages, we elucidate the impacts of electrodes' wettability and structures on their electrolysis performance, on a regular laboratory base. The obtained knowledge provides us important optimization guidelines of AWE designs and operating schemes.
△ Less
Submitted 17 May, 2024;
originally announced May 2024.
-
Adaptive Proton Therapy Using CBCT-Guided Digital Twins
Authors:
Chih-Wei Chang,
Zhen Tian,
Richard L. J. Qiu,
H. Scott McGinnis,
Duncan Bohannon,
Pretesh Patel,
Yinan Wang,
David S. Yu,
Sagar A. Patel,
Jun Zhou,
Xiaofeng Yang
Abstract:
This study aims to develop a digital twin (DT) framework to enhance adaptive proton stereotactic body radiation therapy (SBRT) for prostate cancer. Prostate SBRT has emerged as a leading option for external beam radiotherapy due to its effectiveness and reduced treatment duration. However, interfractional anatomy variations can impact treatment outcomes. This study seeks to address these uncertain…
▽ More
This study aims to develop a digital twin (DT) framework to enhance adaptive proton stereotactic body radiation therapy (SBRT) for prostate cancer. Prostate SBRT has emerged as a leading option for external beam radiotherapy due to its effectiveness and reduced treatment duration. However, interfractional anatomy variations can impact treatment outcomes. This study seeks to address these uncertainties using DT concept, with the goal of improving treatment quality, potentially revolutionizing prostate radiotherapy to offer personalized treatment solutions. Our study presented a pioneering approach that leverages DT technology to enhance adaptive proton SBRT. The framework improves treatment plans by utilizing patient-specific CTV setup uncertainty, which is usually smaller than conventional clinical setups. This research contributes to the ongoing efforts to enhance the efficiency and efficacy of prostate radiotherapy, with ultimate goals of improving patient outcomes and life quality.
△ Less
Submitted 17 May, 2024; v1 submitted 16 May, 2024;
originally announced May 2024.
-
Diffeomorphic Transformer-based Abdomen MRI-CT Deformable Image Registration
Authors:
Yang Lei,
Luke A. Matkovic,
Justin Roper,
Tonghe Wang,
Jun Zhou,
Beth Ghavidel,
Mark McDonald,
Pretesh Patel,
Xiaofeng Yang
Abstract:
This paper aims to create a deep learning framework that can estimate the deformation vector field (DVF) for directly registering abdominal MRI-CT images. The proposed method assumed a diffeomorphic deformation. By using topology-preserved deformation features extracted from the probabilistic diffeomorphic registration model, abdominal motion can be accurately obtained and utilized for DVF estimat…
▽ More
This paper aims to create a deep learning framework that can estimate the deformation vector field (DVF) for directly registering abdominal MRI-CT images. The proposed method assumed a diffeomorphic deformation. By using topology-preserved deformation features extracted from the probabilistic diffeomorphic registration model, abdominal motion can be accurately obtained and utilized for DVF estimation. The model integrated Swin transformers, which have demonstrated superior performance in motion tracking, into the convolutional neural network (CNN) for deformation feature extraction. The model was optimized using a cross-modality image similarity loss and a surface matching loss. To compute the image loss, a modality-independent neighborhood descriptor (MIND) was used between the deformed MRI and CT images. The surface matching loss was determined by measuring the distance between the warped coordinates of the surfaces of contoured structures on the MRI and CT images. The deformed MRI image was assessed against the CT image using the target registration error (TRE), Dice similarity coefficient (DSC), and mean surface distance (MSD) between the deformed contours of the MRI image and manual contours of the CT image. When compared to only rigid registration, DIR with the proposed method resulted in an increase of the mean DSC values of the liver and portal vein from 0.850 and 0.628 to 0.903 and 0.763, a decrease of the mean MSD of the liver from 7.216 mm to 3.232 mm, and a decrease of the TRE from 26.238 mm to 8.492 mm. The proposed deformable image registration method based on a diffeomorphic transformer provides an effective and efficient way to generate an accurate DVF from an MRI-CT image pair of the abdomen. It could be utilized in the current treatment planning workflow for liver radiotherapy.
△ Less
Submitted 4 May, 2024;
originally announced May 2024.
-
Development of the strip LGAD detector with double-end readout for future colliders
Authors:
Weiyi Sun,
Mengzhao Li,
Tianyuan Zhang,
Mei Zhao,
Yunyun Fan,
Shuqi Li,
Yuan Feng,
Xinhui Huang,
Xuan Yang,
Wei Wang,
Zhijun Liang,
Yuekun Heng
Abstract:
The Low-Gain Avalanche Diode (LGAD) is a new silicon detector and holds wide application prospects in particle physics experiments due to its excellent timing resolution.
The LGAD with a pixel size of 1.3 mm $\times$ 1.3 mm was used to construct a High Granularity Timing Detector (HGTD) in ATLAS experiments to solve the pile-up problem.
Meanwhile, the Circular Electron Positron Collider (CEPC)…
▽ More
The Low-Gain Avalanche Diode (LGAD) is a new silicon detector and holds wide application prospects in particle physics experiments due to its excellent timing resolution.
The LGAD with a pixel size of 1.3 mm $\times$ 1.3 mm was used to construct a High Granularity Timing Detector (HGTD) in ATLAS experiments to solve the pile-up problem.
Meanwhile, the Circular Electron Positron Collider (CEPC) also proposes detectors using the LGAD. However, pixel LGAD exhibits higher readout electronics density and cost, which somewhat limits the application of LGADs. To decrease the readout electronics density, the Institute of High Energy Physics (IHEP) of the Chinese Academy of Sciences has designed strip LGADs with larger areas. These strip LGADs are all 19 mm in length but with different widths of 1.0 mm, 0.5 mm, and 0.3 mm.
This article provides a detailed introduction to the design parameters of these strip LGADs and tests their electrical characteristics, including leakage current, break-down voltage, depletion capacitance, etc.
The timing resolution and signal-to-noise ratio of the three strip LGAD sensors were investigated using a beta source test system.
The position resolution parallel to the strip direction was tested and analyzed for the first time using a pico-second laser test system.
Tests have demonstrated that the timing resolution of strip LGADs can reach about 37.5 ps, and position resolution parallel to the strip direction is better than 1 mm.
△ Less
Submitted 2 May, 2024;
originally announced May 2024.
-
Fast MRI Reconstruction Using Deep Learning-based Compressed Sensing: A Systematic Review
Authors:
Mojtaba Safari,
Zach Eidex,
Chih-Wei Chang,
Richard L. J. Qiu,
Xiaofeng Yang
Abstract:
Magnetic resonance imaging (MRI) has revolutionized medical imaging, providing a non-invasive and highly detailed look into the human body. However, the long acquisition times of MRI present challenges, causing patient discomfort, motion artifacts, and limiting real-time applications. To address these challenges, researchers are exploring various techniques to reduce acquisition time and improve t…
▽ More
Magnetic resonance imaging (MRI) has revolutionized medical imaging, providing a non-invasive and highly detailed look into the human body. However, the long acquisition times of MRI present challenges, causing patient discomfort, motion artifacts, and limiting real-time applications. To address these challenges, researchers are exploring various techniques to reduce acquisition time and improve the overall efficiency of MRI. One such technique is compressed sensing (CS), which reduces data acquisition by leveraging image sparsity in transformed spaces. In recent years, deep learning (DL) has been integrated with CS-MRI, leading to a new framework that has seen remarkable growth. DL-based CS-MRI approaches are proving to be highly effective in accelerating MR imaging without compromising image quality. This review comprehensively examines DL-based CS-MRI techniques, focusing on their role in increasing MR imaging speed. We provide a detailed analysis of each category of DL-based CS-MRI including end-to-end, unroll optimization, self-supervised, and federated learning. Our systematic review highlights significant contributions and underscores the exciting potential of DL in CS-MRI. Additionally, our systematic review efficiently summarizes key results and trends in DL-based CS-MRI including quantitative metrics, the dataset used, acceleration factors, and the progress of and research interest in DL techniques over time. Finally, we discuss potential future directions and the importance of DL-based CS-MRI in the advancement of medical imaging. To facilitate further research in this area, we provide a GitHub repository that includes up-to-date DL-based CS-MRI publications and publicly available datasets - https://github.com/mosaf/Awesome-DL-based-CS-MRI.
△ Less
Submitted 30 April, 2024;
originally announced May 2024.
-
The Impact of COVID-19 on Co-authorship and Economics Scholars' Productivity
Authors:
Hanqiao Zhang,
Joy D. Xiuyao Yang
Abstract:
The COVID-19 pandemic has disrupted traditional academic collaboration patterns, prompting a unique opportunity to analyze the influence of peer effects and coauthorship dynamics on research output. Using a novel dataset, this paper endeavors to make a first cut at investigating the role of peer effects on the productivity of economics scholars, measured by the number of publications, in both pre-…
▽ More
The COVID-19 pandemic has disrupted traditional academic collaboration patterns, prompting a unique opportunity to analyze the influence of peer effects and coauthorship dynamics on research output. Using a novel dataset, this paper endeavors to make a first cut at investigating the role of peer effects on the productivity of economics scholars, measured by the number of publications, in both pre-pandemic and pandemic times. Results show that peer effect is significant for the pre-pandemic time but not for the pandemic time. The findings contribute to our understanding of how research collaboration influences knowledge production and may help guide policies aimed at fostering collaboration and enhancing research productivity in the academic community.
△ Less
Submitted 29 April, 2024;
originally announced April 2024.
-
Role of nonlocal heat transport on the laser ablative Rayleigh-Taylor instability
Authors:
Z. H. Chen,
X. H. Yang,
G. B. Zhang,
Y. Y. Ma,
R. Yan,
H. Xu,
Z. M. Sheng,
F. Q. Shao,
J. Zhang
Abstract:
Ablative Rayleigh-Taylor instability (ARTI) and nonlocal heat transport are the critical problems in laser-driven inertial confinement fusion, while their coupling with each other is not completely understood yet. Here the ARTI in the presence of nonlocal heat transport is studied self-consistently for the first time theoretically and by using radiation hydrodynamic simulations. It is found that t…
▽ More
Ablative Rayleigh-Taylor instability (ARTI) and nonlocal heat transport are the critical problems in laser-driven inertial confinement fusion, while their coupling with each other is not completely understood yet. Here the ARTI in the presence of nonlocal heat transport is studied self-consistently for the first time theoretically and by using radiation hydrodynamic simulations. It is found that the nonlocal heat flux generated by the hot electron transport tends to attenuate the growth of instability, especially for short wavelength perturbations. A linear theory of the ARTI coupled with the nonlocal heat flux is developed, and a prominent stabilization of the ablation front via the nonlocal heat flux is found, in good agreement with numerical simulations. This effect becomes more significant as the laser intensity increases. Our results should have important references for the target designing for inertial confinement fusion.
△ Less
Submitted 11 April, 2024;
originally announced April 2024.
-
Wettability-dependent dissolution dynamics of oxygen bubbles on Ti64 substrates
Authors:
Hongfei Dai,
Xuegeng Yang,
Karin Schwarzenberger,
Julian Heinrich,
Kerstin Eckert
Abstract:
In this study, the dissolution of a single oxygen bubble on a solid surface, here Titianium alloy Ti64, in ultrapure water with different oxygen undersaturation levels is investigated. For that purpose, a combination of shadowgraph technique and planar laser-induced fluorescence is used to measure simultaneously the changes in bubble geometry and in the dissolved oxygen concentration around the bu…
▽ More
In this study, the dissolution of a single oxygen bubble on a solid surface, here Titianium alloy Ti64, in ultrapure water with different oxygen undersaturation levels is investigated. For that purpose, a combination of shadowgraph technique and planar laser-induced fluorescence is used to measure simultaneously the changes in bubble geometry and in the dissolved oxygen concentration around the bubble. Two different wettabilities of the Ti64 surface are adjusted by using plasma-enhanced chemical vapour deposition. The dissolution process on the solid surface involves two distinct phases, namely bouncing of the oxygen bubble at the Ti64 surface and the subsequent dissolution of the bubble, primarily by diffusion. By investigating the features of oxygen bubbles bouncing, it was found that the boundary layer of dissolved oxygen surrounding the bubble surface is redistributed by the vortices emerging during bouncing. This establishes the initial conditions for the subsequent second dissolution phase of the oxygen bubbles on the Ti64 surfaces. In this phase, the mass transfer of O2 proceeds non-homogenously across the bubble surface, leading to an oxygen accumulation close to the Ti64 surface. We further show that the main factor influencing the differences in the dynamics of O2 bubble dissolution is the variation in the surface area of the bubbles available for mass transfer, which is determined by the substrate wettability. As a result, dissolution proceeds faster at the hydrophilic Ti64 surface due to the smaller contact angle, which provokes a larger surface area.
△ Less
Submitted 11 April, 2024;
originally announced April 2024.
-
Atomic magnetometry using a metasurface polarizing beamsplitter in silicon on sapphire
Authors:
Xuting Yang,
Pritha Mukherjee,
Minjeong Kim,
Hongyan Mei,
Chengyu Fang,
Soyeon Choi,
Yuhan Tong,
Sarah Perlowski,
David A. Czaplewski,
Alan M. Dibos,
Mikhail A. Kats,
Jennifer T. Choy
Abstract:
We demonstrate atomic magnetometry using a metasurface polarizing beamsplitter fabricated on a silicon-on-sapphire (SOS) platform. The metasurface splits a beam that is near-resonant with the rubidium atoms (795 nm) into orthogonal linear polarizations, enabling measurement of magnetically sensitive circular birefringence in a rubidium vapor through balanced polarimetry. We incorporated the metasu…
▽ More
We demonstrate atomic magnetometry using a metasurface polarizing beamsplitter fabricated on a silicon-on-sapphire (SOS) platform. The metasurface splits a beam that is near-resonant with the rubidium atoms (795 nm) into orthogonal linear polarizations, enabling measurement of magnetically sensitive circular birefringence in a rubidium vapor through balanced polarimetry. We incorporated the metasurface into an atomic magnetometer based on nonlinear magneto-optical rotation and measured sub-nanotesla sensitivity, which is limited by low-frequency technical noise and transmission loss through the metasurface. To our knowledge, this work represents the first demonstration of SOS nanophotonics for atom-based sensing and paves the way for highly integrated, miniaturized atomic sensors with enhanced sensitivity and portability.
△ Less
Submitted 2 April, 2024;
originally announced April 2024.
-
Automated HER2 Scoring in Breast Cancer Images Using Deep Learning and Pyramid Sampling
Authors:
Sahan Yoruc Selcuk,
Xilin Yang,
Bijie Bai,
Yijie Zhang,
Yuzhu Li,
Musa Aydin,
Aras Firat Unal,
Aditya Gomatam,
Zhen Guo,
Darrow Morgan Angus,
Goren Kolodney,
Karine Atlan,
Tal Keidar Haran,
Nir Pillar,
Aydogan Ozcan
Abstract:
Human epidermal growth factor receptor 2 (HER2) is a critical protein in cancer cell growth that signifies the aggressiveness of breast cancer (BC) and helps predict its prognosis. Accurate assessment of immunohistochemically (IHC) stained tissue slides for HER2 expression levels is essential for both treatment guidance and understanding of cancer mechanisms. Nevertheless, the traditional workflow…
▽ More
Human epidermal growth factor receptor 2 (HER2) is a critical protein in cancer cell growth that signifies the aggressiveness of breast cancer (BC) and helps predict its prognosis. Accurate assessment of immunohistochemically (IHC) stained tissue slides for HER2 expression levels is essential for both treatment guidance and understanding of cancer mechanisms. Nevertheless, the traditional workflow of manual examination by board-certified pathologists encounters challenges, including inter- and intra-observer inconsistency and extended turnaround times. Here, we introduce a deep learning-based approach utilizing pyramid sampling for the automated classification of HER2 status in IHC-stained BC tissue images. Our approach analyzes morphological features at various spatial scales, efficiently managing the computational load and facilitating a detailed examination of cellular and larger-scale tissue-level details. This method addresses the tissue heterogeneity of HER2 expression by providing a comprehensive view, leading to a blind testing classification accuracy of 84.70%, on a dataset of 523 core images from tissue microarrays. Our automated system, proving reliable as an adjunct pathology tool, has the potential to enhance diagnostic precision and evaluation speed, and might significantly impact cancer treatment planning.
△ Less
Submitted 31 March, 2024;
originally announced April 2024.
-
UAlign: Pushing the Limit of Template-free Retrosynthesis Prediction with Unsupervised SMILES Alignment
Authors:
Kaipeng Zeng,
Bo yang,
Xin Zhao,
Yu Zhang,
Fan Nie,
Xiaokang Yang,
Yaohui **,
Yanyan Xu
Abstract:
Motivation: Retrosynthesis planning poses a formidable challenge in the organic chemical industry. Single-step retrosynthesis prediction, a crucial step in the planning process, has witnessed a surge in interest in recent years due to advancements in AI for science. Various deep learning-based methods have been proposed for this task in recent years, incorporating diverse levels of additional chem…
▽ More
Motivation: Retrosynthesis planning poses a formidable challenge in the organic chemical industry. Single-step retrosynthesis prediction, a crucial step in the planning process, has witnessed a surge in interest in recent years due to advancements in AI for science. Various deep learning-based methods have been proposed for this task in recent years, incorporating diverse levels of additional chemical knowledge dependency.
Results: This paper introduces UAlign, a template-free graph-to-sequence pipeline for retrosynthesis prediction. By combining graph neural networks and Transformers, our method can more effectively leverage the inherent graph structure of molecules. Based on the fact that the majority of molecule structures remain unchanged during a chemical reaction, we propose a simple yet effective SMILES alignment technique to facilitate the reuse of unchanged structures for reactant generation. Extensive experiments show that our method substantially outperforms state-of-the-art template-free and semi-template-based approaches. Importantly, our template-free method achieves effectiveness comparable to, or even surpasses, established powerful template-based methods.
Scientific contribution: We present a novel graph-to-sequence template-free retrosynthesis prediction pipeline that overcomes the limitations of Transformer-based methods in molecular representation learning and insufficient utilization of chemical information. We propose an unsupervised learning mechanism for establishing product-atom correspondence with reactant SMILES tokens, achieving even better results than supervised SMILES alignment methods. Extensive experiments demonstrate that UAlign significantly outperforms state-of-the-art template-free methods and rivals or surpasses template-based approaches, with up to 5\% (top-5) and 5.4\% (top-10) increased accuracy over the strongest baseline.
△ Less
Submitted 19 April, 2024; v1 submitted 24 March, 2024;
originally announced April 2024.
-
Dual-Energy Cone-Beam CT Using Two Complementary Limited-Angle Scans with A Projection-Consistent Diffusion Model
Authors:
Junbo Peng,
Chih-Wei Chang,
Richard L. J. Qiu,
Tonghe Wang,
Justin Roper,
Beth Ghavidel,
Xiangyang Tang,
Xiaofeng Yang
Abstract:
Background: Dual-energy imaging on cone-beam CT (CBCT) scanners has great potential in different clinical applications, including image-guided surgery and adaptive proton therapy. However, the clinical practice of dual-energy CBCT (DE-CBCT) has been hindered by the requirement of sophisticated hardware components. Purpose: In this work, we aim to propose a practical solution for single-scan dual-e…
▽ More
Background: Dual-energy imaging on cone-beam CT (CBCT) scanners has great potential in different clinical applications, including image-guided surgery and adaptive proton therapy. However, the clinical practice of dual-energy CBCT (DE-CBCT) has been hindered by the requirement of sophisticated hardware components. Purpose: In this work, we aim to propose a practical solution for single-scan dual-energy imaging on current CBCT scanners without hardware modifications, using two complementary limited-angle scans with a projection-consistent diffusion model. Methods: Our approach has two major components: data acquisition using two complementary limited-angle scans, and dual-energy projections restoration with subsequent FDK reconstruction. Two complementary scans at different kVps are performed in a single rotation by switching the tube voltage at the middle of the source trajectory, acquiring the mixed-spectra projection in a single CBCT scan. Full-sampled dual-energy projections are then restored by a projection-consistent diffusion model in a slice-by-slice manner, followed by the DE-CBCT reconstruction using the FDK algorithm. Results: The proposed method was evaluated in a simulation study of digital abdomen phantoms and a study of real rat data. In the simulation study, the proposed method produced DE-CBCT images at a mean absolute error (MAE) of 20 HU. In the small-animal study, reconstructed DE-CBCT images using the proposed method gave an MAE of 25 HU. Conclusion: This study demonstrates the feasibility of DE-CBCT imaging using two complementary limited-angle scans with a projection-consistent diffusion model in both half-fan and short scans. The proposed method may allow quantitative applications of DE-CBCT and enable DE-CBCT-based adaptive proton therapy.
△ Less
Submitted 18 March, 2024;
originally announced March 2024.
-
Anomalous thermal transport and high thermoelectric performance of Cu-based vanadate CuVO3
Authors:
Xin **,
Qiling Ou,
Haoran Wei,
Xianyong Ding,
Fangyang Zhan,
Rui Wang,
Xiaolong Yang,
Xuewei Lv,
Peng Yu
Abstract:
Thermoelectric (TE) conversion technology, capable of transforming heat into electricity, is critical for sustainable energy solutions. Many promising TE materials contain rare or toxic elements, so the development of cost-effective and eco-friendly high-performance TE materials is highly urgent. Herein, we explore the thermal transport and TE properties of transition metal vanadate CuVO3 by using…
▽ More
Thermoelectric (TE) conversion technology, capable of transforming heat into electricity, is critical for sustainable energy solutions. Many promising TE materials contain rare or toxic elements, so the development of cost-effective and eco-friendly high-performance TE materials is highly urgent. Herein, we explore the thermal transport and TE properties of transition metal vanadate CuVO3 by using first-principles calculation. On the basis of unified theory of heat conduction, we uncover the hierarchical thermal transport feature in CuVO3, where wave-like tunneling makes a significant contribution to the lattice thermal conductivity (\k{appa}l) and result in the anomalously weak temperature dependence of \k{appa}l. This is primarily attributable to the complex phononic band structure caused by the heterogeneity of Cu-O and V-O bonds. Simultaneously, we report a high power factor of 5.45 mW K-2 m-1 realized in hole-doped CuVO3, which arises from a high electrical conductivity and a large Seebeck coefficient enabled by the multiple valleys and large electronic density of states near the valence band edge. Impressively, the low \k{appa}l and the high power factor make p-typed CuVO3 have ZT of up to 1.39, with the excellent average ZT above 1.0 from 300 to 600 K, which is superior to most reported Cu-based TE materials. Our findings suggest that CuVO3 compound is promising candidate for energy conversion applications in innovative TE devices.
△ Less
Submitted 14 March, 2024;
originally announced March 2024.
-
Radiative lifetime of the A 2Π1/2 state in RaF with relevance to laser cooling
Authors:
M. Athanasakis-Kaklamanakis,
S. G. Wilkins,
P. Lassègues,
L. Lalanne,
J. R. Reilly,
O. Ahmad,
M. Au,
S. W. Bai,
J. Berbalk,
C. Bernerd,
A. Borschevsky,
A. A. Breier,
K. Chrysalidis,
T. E. Cocolios,
R. P. de Groote,
C. M. Fajardo-Zambrano,
K. T. Flanagan,
S. Franchoo,
R. F. Garcia Ruiz,
D. Hanstorp,
R. Heinke,
P. Imgram,
A. Koszorús,
A. A. Kyuberis,
J. Lim
, et al. (16 additional authors not shown)
Abstract:
The radiative lifetime of the $A$ $^2 Π_{1/2}$ (v=0) state in radium monofluoride (RaF) is measured to be 35(1) ns. The lifetime of this state and the related decay rate $Γ= 2.86(8) \times 10^7$ $s^{-1}$ are of relevance to the laser cooling of RaF via the optically closed $A$ $^2 Π_{1/2} \leftarrow X$ $^2Σ_{1/2}$ transition, which makes the molecule a promising probe to search for new physics. Ra…
▽ More
The radiative lifetime of the $A$ $^2 Π_{1/2}$ (v=0) state in radium monofluoride (RaF) is measured to be 35(1) ns. The lifetime of this state and the related decay rate $Γ= 2.86(8) \times 10^7$ $s^{-1}$ are of relevance to the laser cooling of RaF via the optically closed $A$ $^2 Π_{1/2} \leftarrow X$ $^2Σ_{1/2}$ transition, which makes the molecule a promising probe to search for new physics. RaF is found to have a comparable photon-scattering rate to homoelectronic laser-coolable molecules. Thanks to its highly diagonal Franck-Condon matrix, it is expected to scatter an order of magnitude more photons than other molecules when using just 3 cooling lasers, before it decays to a dark state. The lifetime measurement in RaF is benchmarked by measuring the lifetime of the $8P_{3/2}$ state in Fr to be 83(3) ns, in agreement with literature.
△ Less
Submitted 6 June, 2024; v1 submitted 14 March, 2024;
originally announced March 2024.
-
Virtual birefringence imaging and histological staining of amyloid deposits in label-free tissue using autofluorescence microscopy and deep learning
Authors:
Xilin Yang,
Bijie Bai,
Yijie Zhang,
Musa Aydin,
Sahan Yoruc Selcuk,
Zhen Guo,
Gregory A. Fishbein,
Karine Atlan,
William Dean Wallace,
Nir Pillar,
Aydogan Ozcan
Abstract:
Systemic amyloidosis is a group of diseases characterized by the deposition of misfolded proteins in various organs and tissues, leading to progressive organ dysfunction and failure. Congo red stain is the gold standard chemical stain for the visualization of amyloid deposits in tissue sections, as it forms complexes with the misfolded proteins and shows a birefringence pattern under polarized lig…
▽ More
Systemic amyloidosis is a group of diseases characterized by the deposition of misfolded proteins in various organs and tissues, leading to progressive organ dysfunction and failure. Congo red stain is the gold standard chemical stain for the visualization of amyloid deposits in tissue sections, as it forms complexes with the misfolded proteins and shows a birefringence pattern under polarized light microscopy. However, Congo red staining is tedious and costly to perform, and prone to false diagnoses due to variations in the amount of amyloid, staining quality and expert interpretation through manual examination of tissue under a polarization microscope. Here, we report the first demonstration of virtual birefringence imaging and virtual Congo red staining of label-free human tissue to show that a single trained neural network can rapidly transform autofluorescence images of label-free tissue sections into brightfield and polarized light microscopy equivalent images, matching the histochemically stained versions of the same samples. We demonstrate the efficacy of our method with blind testing and pathologist evaluations on cardiac tissue where the virtually stained images agreed well with the histochemically stained ground truth images. Our virtually stained polarization and brightfield images highlight amyloid birefringence patterns in a consistent, reproducible manner while mitigating diagnostic challenges due to variations in the quality of chemical staining and manual imaging processes as part of the clinical workflow.
△ Less
Submitted 14 March, 2024;
originally announced March 2024.
-
Theoretical demonstration of mode transmission in ZGP-based micrometer waveguide platforms
Authors:
Siyi Lu,
Bo Hu,
Xuemei Yang,
Yang Li,
Han Wu,
Houkun Liang
Abstract:
Birefringence phase-matching based \c{hi}(2) ZnGeP2 (ZGP) waveguide platform has been recently reported for excellent mid-infrared laser generation. Here, a detailed theoretical characterization of mode transmission taking waveguide anisotropy and substrate material absorption into account in a micrometer ZGP waveguide platform (ZGP-on-SiO2) is conducted. Benefited from high-index contrast between…
▽ More
Birefringence phase-matching based \c{hi}(2) ZnGeP2 (ZGP) waveguide platform has been recently reported for excellent mid-infrared laser generation. Here, a detailed theoretical characterization of mode transmission taking waveguide anisotropy and substrate material absorption into account in a micrometer ZGP waveguide platform (ZGP-on-SiO2) is conducted. Benefited from high-index contrast between ZGP and substrate (SiO2/Air), Transverse electric and magnetic (TM and TE) mode transmission loss at interested wavelengths range of 2 - 12 μm is calculated to be less than 4 dB/cm and 1.5 dB/cm, respectively, in the designed ZGP waveguide. Notably, non-obvious oscillation of mode transmission loss versus phase-matching angles is observed, which is different from that in the previously reported weakly guided anisotropic waveguide. A vital phenomenon named mode crossing at some wavelengths in TM polarization is also exhibited in our waveguide platforms, which jeopardizes waveguide performances and could be avoided by changing the phase-matching angle in practice. This work provides a significant indication of ZGP waveguide design optimization in future and also exhibits extendibility to other birefringent crystal waveguide platforms.
△ Less
Submitted 12 March, 2024;
originally announced March 2024.
-
Beneath the Surface: Revealing Deep-Tissue Blood Flow in Human Subjects with Massively Parallelized Diffuse Correlation Spectroscopy
Authors:
Lucas Kreiss,
Melissa Wu,
Michael Wayne,
Shiqi Xu,
Paul McKee,
Derrick Dwamena,
Kanghyun Kim,
Kyung Chul Lee,
Wenhui Liu,
Aarin Ulku,
Mark Harfouche,
Xi Yang,
Clare Cook,
Amey Chaware,
Seung Ah Lee,
Erin Buckley,
Claudio Bruschini,
Edoardo Charbon,
Scott Huettel,
Roarke Horstmeyer
Abstract:
Diffuse Correlation Spectroscopy (DCS) allows the label-free investigation of microvascular dynamics deep within living tissue. However, common implementations of DCS are currently limited to measurement depths of $\sim 1-1.5cm$, which can limit the accuracy of cerebral hemodynamics measurement. Here we present massively parallelized DCS (pDCS) using novel single photon avalanche detector (SPAD) a…
▽ More
Diffuse Correlation Spectroscopy (DCS) allows the label-free investigation of microvascular dynamics deep within living tissue. However, common implementations of DCS are currently limited to measurement depths of $\sim 1-1.5cm$, which can limit the accuracy of cerebral hemodynamics measurement. Here we present massively parallelized DCS (pDCS) using novel single photon avalanche detector (SPAD) arrays with up to 500x500 individual channels. The new SPAD array technology can boost the signal-to-noise ratio by a factor of up to 500 compared to single-pixel DCS, or by more than 15-fold compared to the most recent state-of-the-art pDCS demonstrations. Our results demonstrate the first in vivo use of this massively parallelized DCS system to measure cerebral blood flow changes at $\sim 2cm$ depth in human adults. We compared different modes of operation and applied a dual detection strategy, where a secondary SPAD array is used to simultaneously assess the superficial blood flow as a built-in reference measurement. While the blood flow in the superficial scalp tissue showed no significant change during cognitive activation, the deep pDCS measurement showed a statistically significant increase in the derived blood flow index of 8-12% when compared to the control rest state.
△ Less
Submitted 25 June, 2024; v1 submitted 6 March, 2024;
originally announced March 2024.
-
Assessing Bilateral Neurovascular Bundles Function with Pulsed Wave Doppler Ultrasound: Implications for Reducing Erectile Dysfunction Following Prostate Radiotherapy
Authors:
**g Wang,
Xiaofeng Yang,
Boran Zhou,
James Sohn,
Richard Qiu,
Pretesh Patel,
Ashesh B. Jani,
Tian Liu
Abstract:
This study aims to evaluate the functional status of bilateral neurovascular bundles (NVBs) using pulsed wave Doppler ultrasound in patients undergoing prostate radiotherapy (RT). Sixty-two patients (mean age: 66.1 +/- 7.2 years) underwent transrectal ultrasound scan using a conventional ultrasound scanner, a 7.5 MHz bi-plane probe and a mechanical stepper. The ultrasound protocol comprised 3 step…
▽ More
This study aims to evaluate the functional status of bilateral neurovascular bundles (NVBs) using pulsed wave Doppler ultrasound in patients undergoing prostate radiotherapy (RT). Sixty-two patients (mean age: 66.1 +/- 7.2 years) underwent transrectal ultrasound scan using a conventional ultrasound scanner, a 7.5 MHz bi-plane probe and a mechanical stepper. The ultrasound protocol comprised 3 steps: 1) 3D B-mode scans of the entire prostate, 2) localization of NVBs using color flow Doppler imaging, and 3) measurement of NVB function using pulsed wave Doppler. Five pulsed Doppler waveform features were extracted: peak systolic velocity (PSV), end-diastolic velocity (EDV), mean velocity (Vm), resistive index (RI), and pulsatile index (PI). In summary, this study presents a Doppler evaluation of NVBs in patients undergoing prostate RT. It highlights substantial differences in Doppler ultrasound waveform features between bilateral NVBs. The proposed ultrasound method may prove valuable as clinicians strive to deliver NVB-sparing RT to preserve sexual function effectively and enhance patients' overall well-being.
△ Less
Submitted 29 February, 2024;
originally announced March 2024.
-
Skyrmion Generation in a Plasmonic Nanoantenna through the Inverse Faraday Effect
Authors:
Xingyu Yang,
Ye Mou,
Bruno Gallas,
Sébastien Bidault,
Mathieu Mivelle
Abstract:
Skyrmions are topological structures characterized by a winding vectorial configuration that provides a quantized topological charge. In magnetic materials, skyrmions are localized spin textures that exhibit unique stability and mobility properties, making them highly relevant to the burgeoning field of spintronics. In optics, these structures open new frontiers in manipulating and controlling lig…
▽ More
Skyrmions are topological structures characterized by a winding vectorial configuration that provides a quantized topological charge. In magnetic materials, skyrmions are localized spin textures that exhibit unique stability and mobility properties, making them highly relevant to the burgeoning field of spintronics. In optics, these structures open new frontiers in manipulating and controlling light at the nanoscale. The convergence of optics and magnetics holds therefore immense potential for manipulating magnetic processes at ultrafast timescales. Here, we explore the possibility of generating skyrmionic topological structures within the magnetic field induced by the inverse Faraday effect in a plasmonic nanostructure. Our investigation reveals that a gold nanoring, featuring a dark mode, can generate counter-propagating photocurrents between its inner and outer segments, thereby enabling the magnetization of gold and supporting a skyrmionic vectorial distribution. We elucidate that these photocurrents arise from the localized control of light polarization, facilitating their counter-propagative motion. The generation of skyrmions through the inverse Faraday effect at the nanoscale presents a pathway towards directly integrating this topology into magnetic layers. This advancement holds promise for ultrafast timescales, offering direct applications in ultrafast data writing and processing.
△ Less
Submitted 27 February, 2024;
originally announced February 2024.
-
Computational Fluid Dynamics: its Carbon Footprint and Role in Carbon Emission Reduction
Authors:
Xiang I A Yang,
Wen Zhang,
Mahdi Abkar,
William Anderson
Abstract:
Turbulent flow physics regulates the aerodynamic properties of lifting surfaces, the thermodynamic efficiency of vapor power systems, and exchanges of natural and anthropogenic quantities between the atmosphere and ocean, to name just a few applications. The dynamics of turbulent flows are described via numerical integration of the non-linear Navier-Stokes equation -- a procedure known as computat…
▽ More
Turbulent flow physics regulates the aerodynamic properties of lifting surfaces, the thermodynamic efficiency of vapor power systems, and exchanges of natural and anthropogenic quantities between the atmosphere and ocean, to name just a few applications. The dynamics of turbulent flows are described via numerical integration of the non-linear Navier-Stokes equation -- a procedure known as computational fluid dynamics (CFD). At the dawn of scientific computing in the late 1950s, it would be many decades before terms such as ``carbon footprint'' or ``sustainability'' entered the lexicon, and longer still before these themes attained national priority throughout advanced economies. This paper introduces a framework designed to calculate the carbon footprint of CFD and its contribution to carbon emission reduction strategies. We will distinguish between "hero" and "routine" calculations, noting that the carbon footprint of hero calculations is largely determined by the energy source mix utilized. We will also review CFD of flows where turbulence effects are modeled, thus reducing the degrees of freedom. Estimates of the carbon footprint are presented for such fully- and partially-resolved simulations as functions of turbulence activity and calculation year, demonstrating a reduction in carbon emissions by two to five orders of magnitude at practical conditions. Beyond analyzing CO2 emissions, we quantify the benefits of applying CFD towards overall carbon emission reduction. The community's effort to avoid redundant calculations via turbulence databases merits particular attention, with estimates indicating that a single database could potentially reduce CO2 emissions by approximately O(1) million metric tons. Additionally, implementing CFD in the fluids industry has markedly decreased dependence on wind tunnel testing, which is anticipated to lead to CO2 emission reduction.
△ Less
Submitted 8 February, 2024;
originally announced February 2024.
-
Multiplexed all-optical permutation operations using a reconfigurable diffractive optical network
Authors:
Guangdong Ma,
Xilin Yang,
Bijie Bai,
**gxi Li,
Yuhang Li,
Tianyi Gan,
Che-Yung Shen,
Yijie Zhang,
Yuzhu Li,
Mona Jarrahi,
Aydogan Ozcan
Abstract:
Large-scale and high-dimensional permutation operations are important for various applications in e.g., telecommunications and encryption. Here, we demonstrate the use of all-optical diffractive computing to execute a set of high-dimensional permutation operations between an input and output field-of-view through layer rotations in a diffractive optical network. In this reconfigurable multiplexed…
▽ More
Large-scale and high-dimensional permutation operations are important for various applications in e.g., telecommunications and encryption. Here, we demonstrate the use of all-optical diffractive computing to execute a set of high-dimensional permutation operations between an input and output field-of-view through layer rotations in a diffractive optical network. In this reconfigurable multiplexed material designed by deep learning, every diffractive layer has four orientations: 0, 90, 180, and 270 degrees. Each unique combination of these rotatable layers represents a distinct rotation state of the diffractive design tailored for a specific permutation operation. Therefore, a K-layer rotatable diffractive material is capable of all-optically performing up to 4^K independent permutation operations. The original input information can be decrypted by applying the specific inverse permutation matrix to output patterns, while applying other inverse operations will lead to loss of information. We demonstrated the feasibility of this reconfigurable multiplexed diffractive design by approximating 256 randomly selected permutation matrices using K=4 rotatable diffractive layers. We also experimentally validated this reconfigurable diffractive network using terahertz radiation and 3D-printed diffractive layers, providing a decent match to our numerical results. The presented rotation-multiplexed diffractive processor design is particularly useful due to its mechanical reconfigurability, offering multifunctional representation through a single fabrication process.
△ Less
Submitted 4 February, 2024;
originally announced February 2024.
-
Femtosecond drift photocurrents generated by an inversely designed plasmonic antenna
Authors:
Ye Mou,
Xingyu Yang,
Marlo Vega,
Bruno Gallas,
Jean-Francois Bryche,
Alexandre Bouhelier,
Mathieu Mivelle
Abstract:
Photocurrents play a crucial role in various applications, including light detection, photovoltaics, and THz radiation generation. Despite the abundance of methods and materials for converting light into electrical signals, the use of metals in this context has been relatively limited. Nanostructures supporting surface plasmons in metals offer precise light manipulation and induce light-driven ele…
▽ More
Photocurrents play a crucial role in various applications, including light detection, photovoltaics, and THz radiation generation. Despite the abundance of methods and materials for converting light into electrical signals, the use of metals in this context has been relatively limited. Nanostructures supporting surface plasmons in metals offer precise light manipulation and induce light-driven electron motion. Through inverse design optimization of a gold nanostructure, we demonstrate enhanced volumetric, unidirectional, intense, and ultrafast photocurrents via a magneto-optical process derived from the inverse Faraday effect. This is achieved through fine-tuning the amplitude, polarization, and their gradients in the local light field. The virtually instantaneous process allows dynamic photocurrent modulation by varying optical pulse duration, potentially yielding nanosources of intense, ultrafast, planar magnetic fields, and frequency-tunable THz emission. These findings opens avenues for ultrafast magnetic material manipulation and holds promise for nanoscale THz spectroscopy.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
Modal interactions and energy transfers between a linear oscillator and a nonlinear vibration absorber
Authors:
Lan Huang,
Xiaodong Yang
Abstract:
Considerable attention has been given to the use of a nonlinear energy sink (NES) as a nonlinear vibration absorber. The NES is an efficient passive control device, which has been the focus of extensive research. In this paper, the modal interactions and the energy transfers between a linear primary system subjected to a harmonically external excitation and a grounded NES are studied. Based on the…
▽ More
Considerable attention has been given to the use of a nonlinear energy sink (NES) as a nonlinear vibration absorber. The NES is an efficient passive control device, which has been the focus of extensive research. In this paper, the modal interactions and the energy transfers between a linear primary system subjected to a harmonically external excitation and a grounded NES are studied. Based on the complexification-averaging method and the fast-slow analysis, this system is reduced from the four-dimensional (4D) real vector fields to the two-dimensional (2D) complex vector fields, namely the slow flow. By analyzing the fast-slow systems, defined on different time scales, the critical manifold is obtained to capture the dynamics of the system. With the change of the system parameters, the critical manifold, projected on its modulus plane, presents distinct structures, that capture diverse types of modal interactions between the linear oscillator and the NES. The numerical results and the Hilbert spectrums verify that the critical manifold on the modulus plane can predict modal interactions and energy transfers on multiple time scales well. Additionally, the two special types of oscillations, namely the point-type oscillations and the ring-type oscillations, cannot be captured by the critical manifold.
△ Less
Submitted 6 February, 2024; v1 submitted 30 January, 2024;
originally announced January 2024.
-
Vision-Informed Flow Image Super-Resolution with Quaternion Spatial Modeling and Dynamic Flow Convolution
Authors:
Qinglong Cao,
Zhengqin Xu,
Chao Ma,
Xiaokang Yang,
Yuntian Chen
Abstract:
Flow image super-resolution (FISR) aims at recovering high-resolution turbulent velocity fields from low-resolution flow images. Existing FISR methods mainly process the flow images in natural image patterns, while the critical and distinct flow visual properties are rarely considered. This negligence would cause the significant domain gap between flow and natural images to severely hamper the acc…
▽ More
Flow image super-resolution (FISR) aims at recovering high-resolution turbulent velocity fields from low-resolution flow images. Existing FISR methods mainly process the flow images in natural image patterns, while the critical and distinct flow visual properties are rarely considered. This negligence would cause the significant domain gap between flow and natural images to severely hamper the accurate perception of flow turbulence, thereby undermining super-resolution performance. To tackle this dilemma, we comprehensively consider the flow visual properties, including the unique flow imaging principle and morphological information, and propose the first flow visual property-informed FISR algorithm. Particularly, different from natural images that are constructed by independent RGB channels in the light field, flow images build on the orthogonal UVW velocities in the flow field. To empower the FISR network with an awareness of the flow imaging principle, we propose quaternion spatial modeling to model this orthogonal spatial relationship for improved FISR. Moreover, due to viscosity and surface tension characteristics, fluids often exhibit a droplet-like morphology in flow images. Inspired by this morphological property, we design the dynamic flow convolution to effectively mine the morphological information to enhance FISR. Extensive experiments on the newly acquired flow image datasets demonstrate the state-of-the-art performance of our method. Code and data will be made available.
△ Less
Submitted 29 January, 2024;
originally announced January 2024.
-
arXiv:2401.14547
[pdf]
cond-mat.str-el
cond-mat.mes-hall
cond-mat.mtrl-sci
cond-mat.other
physics.app-ph
Discovery of a Topological Charge Density Wave
Authors:
Maksim Litskevich,
Md Shafayat Hossain,
Songbo Zhang,
Zi-Jia Cheng,
Satya N. Guin,
Nitesh Kumar,
Chandra Shekhar,
Zhiwei Wang,
Yongkai Li,
Guoqing Chang,
Jia-Xin Yin,
Qi Zhang,
Guangming Cheng,
Yu-Xiao Jiang,
Tyler A. Cochran,
Nana Shumiya,
Xian P. Yang,
Daniel Multer,
Xiaoxiong Liu,
Nan Yao,
Yugui Yao,
Claudia Felser,
Titus Neupert,
M. Zahid Hasan
Abstract:
Charge density waves (CDWs) appear in numerous condensed matter platforms, ranging from high-Tc superconductors to quantum Hall systems. Despite such ubiquity, there has been a lack of direct experimental study on boundary states that can uniquely stem from the charge order. Here, using scanning tunneling microscopy, we directly visualize the bulk and boundary phenomenology of CDW in a topological…
▽ More
Charge density waves (CDWs) appear in numerous condensed matter platforms, ranging from high-Tc superconductors to quantum Hall systems. Despite such ubiquity, there has been a lack of direct experimental study on boundary states that can uniquely stem from the charge order. Here, using scanning tunneling microscopy, we directly visualize the bulk and boundary phenomenology of CDW in a topological material, Ta2Se8I. Below the transition temperature (TCDW = 260 K), tunneling spectra on an atomically resolved lattice reveal a large insulating gap in the bulk and on the surface, exceeding 500 meV, surpassing predictions from standard weakly-coupled mean-field theory. Spectroscopic imaging confirms the presence of CDW, with LDOS maxima at the conduction band corresponding to the LDOS minima at the valence band, thus revealing a π phase difference in the respective CDW order. Concomitantly, at a monolayer step edge, we detect an in-gap boundary mode with modulations along the edge that match the CDW wavevector along the edge. Intriguingly, the phase of the edge state modulation shifts by π within the charge order gap, connecting the fully gapped bulk (and surface) conduction and valence bands via a smooth energy-phase relation. This bears similarity to the topological spectral flow of edge modes, where the boundary modes bridge the gapped bulk modes in energy and momentum magnitude but in Ta2Se8I, the connectivity distinctly occurs in energy and momentum phase. Notably, our temperature-dependent measurements indicate a vanishing of the insulating gap and the in-gap edge state above TCDW, suggesting their direct relation to CDW. The theoretical analysis also indicates that the observed boundary mode is topological and linked to CDW.
△ Less
Submitted 25 January, 2024;
originally announced January 2024.
-
Subwavelength Imaging using a Solid-Immersion Diffractive Optical Processor
Authors:
**gtian Hu,
Kun Liao,
Niyazi Ulas Dinc,
Carlo Gigli,
Bijie Bai,
Tianyi Gan,
Xurong Li,
Hanlong Chen,
Xilin Yang,
Yuhang Li,
Cagatay Isil,
Md Sadman Sakib Rahman,
**gxi Li,
Xiaoyong Hu,
Mona Jarrahi,
Demetri Psaltis,
Aydogan Ozcan
Abstract:
Phase imaging is widely used in biomedical imaging, sensing, and material characterization, among other fields. However, direct imaging of phase objects with subwavelength resolution remains a challenge. Here, we demonstrate subwavelength imaging of phase and amplitude objects based on all-optical diffractive encoding and decoding. To resolve subwavelength features of an object, the diffractive im…
▽ More
Phase imaging is widely used in biomedical imaging, sensing, and material characterization, among other fields. However, direct imaging of phase objects with subwavelength resolution remains a challenge. Here, we demonstrate subwavelength imaging of phase and amplitude objects based on all-optical diffractive encoding and decoding. To resolve subwavelength features of an object, the diffractive imager uses a thin, high-index solid-immersion layer to transmit high-frequency information of the object to a spatially-optimized diffractive encoder, which converts/encodes high-frequency information of the input into low-frequency spatial modes for transmission through air. The subsequent diffractive decoder layers (in air) are jointly designed with the encoder using deep-learning-based optimization, and communicate with the encoder layer to create magnified images of input objects at its output, revealing subwavelength features that would otherwise be washed away due to diffraction limit. We demonstrate that this all-optical collaboration between a diffractive solid-immersion encoder and the following decoder layers in air can resolve subwavelength phase and amplitude features of input objects in a highly compact design. To experimentally demonstrate its proof-of-concept, we used terahertz radiation and developed a fabrication method for creating monolithic multi-layer diffractive processors. Through these monolithically fabricated diffractive encoder-decoder pairs, we demonstrated phase-to-intensity transformations and all-optically reconstructed subwavelength phase features of input objects by directly transforming them into magnified intensity features at the output. This solid-immersion-based diffractive imager, with its compact and cost-effective design, can find wide-ranging applications in bioimaging, endoscopy, sensing and materials characterization.
△ Less
Submitted 16 January, 2024;
originally announced January 2024.
-
Atmospheric chemistry surrogate modeling with sparse identification of nonlinear dynamics
Authors:
Xiaokai Yang,
Lin Guo,
Zhonghua Zheng,
Nicole Riemer,
Christopher W. Tessum
Abstract:
Modeling atmospheric chemistry is computationally expensive and limits the widespread use of atmospheric chemical transport models. This computational cost arises from solving high-dimensional systems of stiff differential equations. Previous work has demonstrated the promise of machine learning (ML) to accelerate air quality model simulations but has suffered from numerical instability during lon…
▽ More
Modeling atmospheric chemistry is computationally expensive and limits the widespread use of atmospheric chemical transport models. This computational cost arises from solving high-dimensional systems of stiff differential equations. Previous work has demonstrated the promise of machine learning (ML) to accelerate air quality model simulations but has suffered from numerical instability during long-term simulations. This may be because previous ML-based efforts have relied on explicit Euler time integration -- which is known to be unstable for stiff systems -- and have used neural networks which are prone to overfitting. We hypothesize that the creation of parsimonious models combined with modern numerical integration techniques can overcome this limitation. Using a small-scale photochemical mechanism to explore the potential of these methods, we have created a machine-learned surrogate by (1) reducing dimensionality using singular value decomposition to create an interpretably-compressed low-dimensional latent space, and (2) using Sparse Identification of Nonlinear Dynamics (SINDy) to create a differential-equation-based representation of the underlying chemical dynamics in the compressed latent space with reduced numerical stiffness. The root mean square error of the ML model prediction for ozone concentration over nine days is 37.8% of the root mean concentration across all simulations in our testing dataset. The surrogate model is 11$\times$ faster with 12$\times$ fewer integration timesteps compared to the reference model and is numerically stable in all tested simulations. Overall, we find that SINDy can be used to create fast, stable, and accurate surrogates of a simple photochemical mechanism. In future work, we will explore the application of this method to more detailed mechanisms and their use in large-scale simulations.
△ Less
Submitted 11 January, 2024;
originally announced January 2024.
-
Discovery of a hybrid topological quantum state in an elemental solid
Authors:
Md Shafayat Hossain,
Frank Schindler,
Rajibul Islam,
Zahir Muhammad,
Yu-Xiao Jiang,
Zi-Jia Cheng,
Qi Zhang,
Tao Hou,
Hongyu Chen,
Maksim Litskevich,
Brian Casas,
Jia-Xin Yin,
Tyler A. Cochran,
Mohammad Yahyavi,
Xian P. Yang,
Luis Balicas,
Guoqing Chang,
Weisheng Zhao,
Titus Neupert,
M. Zahid Hasan
Abstract:
Topology and interactions are foundational concepts in the modern understanding of quantum matter. Their nexus yields three significant research directions: competition between distinct interactions, as in the multiple intertwined phases, interplay between interactions and topology that drives the phenomena in twisted layered materials and topological magnets, and the coalescence of multiple topol…
▽ More
Topology and interactions are foundational concepts in the modern understanding of quantum matter. Their nexus yields three significant research directions: competition between distinct interactions, as in the multiple intertwined phases, interplay between interactions and topology that drives the phenomena in twisted layered materials and topological magnets, and the coalescence of multiple topological orders to generate distinct novel phases. The first two examples have grown into major areas of research, while the last example remains mostly untouched, mainly because of the lack of a material platform for experimental studies. Here, using tunneling microscopy, photoemission spectroscopy, and theoretical analysis, we unveil a "hybrid" and yet novel topological phase of matter in the simple elemental solid arsenic. Through a unique bulk-surface-edge correspondence, we uncover that arsenic features a conjoined strong and higher-order topology, stabilizing a hybrid topological phase. While momentum-space spectroscopy measurements show signs of topological surface states, real-space microscopy measurements unravel a unique geometry of topology-induced step edge conduction channels revealed on various forms of natural nanostructures on the surface. Using theoretical models, we show that the existence of gapless step edge states in arsenic relies on the simultaneous presence of both a nontrivial strong Z2 invariant and a nontrivial higher-order topological invariant, providing experimental evidence for hybrid topology and its realization in a single crystal. Our discovery highlights pathways to explore the interplay of different kinds of band topology and harness the associated topological conduction channels in future engineered quantum or nano-devices.
△ Less
Submitted 9 January, 2024;
originally announced January 2024.
-
Optically controllable localization of exciton polariton condensates in a potential lattice
Authors:
Qiang Ai,
Jan Wingenbach,
Xinmiao Yang,
**g Wei,
Zaharias Hatzopoulos,
Pavlos G. Savvidis,
Stefan Schumacher,
Xuekai Ma,
Tingge Gao
Abstract:
Exciton polaritons are inherently non-Hermitian systems with adjustable gain and loss coefficients. In this work we show that exciton polariton condensates can be selectively localized in an optically-induced lattice with equal potential depth by judiciously controlling a second focused pump with a very small size. Specifically, the localized polariton condensate can be tuned among different poten…
▽ More
Exciton polaritons are inherently non-Hermitian systems with adjustable gain and loss coefficients. In this work we show that exciton polariton condensates can be selectively localized in an optically-induced lattice with equal potential depth by judiciously controlling a second focused pump with a very small size. Specifically, the localized polariton condensate can be tuned among different potential traps by adjusting the relative distance between the small pump spot and the potential lattice. The adjustment of the excitation position of the smaller pump and its combination with the bigger pump for the potential creation induce a position-dependent loss distribution across the system. The localization of the exciton polariton condensate and its control are independent of the orientation of the potential lattice, thus, even in slightly disordered system, one can selectively excite such localized polariton condensates. Our results illuminate a path to manipulate the non-Hermitian bosonic condensates in integrated photonic chips.
△ Less
Submitted 7 January, 2024;
originally announced January 2024.
-
Unified gas-kinetic wave-particle method for frequency-dependent radiation transport equation
Authors:
Xiaojian Yang,
Yajun Zhu,
Chang Liu,
Kun Xu
Abstract:
The multi-frequency radiation transport equation (RTE) system models the photon transport and the energy exchange process between the background material and different frequency photons. In this paper, the unified gas-kinetic wave-particle (UGKWP) method for multi-frequency RTE is developed to capture the multiscale non-equilibrium transport in different optical regimes. In the UGKWP, a multiscale…
▽ More
The multi-frequency radiation transport equation (RTE) system models the photon transport and the energy exchange process between the background material and different frequency photons. In this paper, the unified gas-kinetic wave-particle (UGKWP) method for multi-frequency RTE is developed to capture the multiscale non-equilibrium transport in different optical regimes. In the UGKWP, a multiscale evolution process is properly designed to obtain both non-equilibrium transport in the optically thin regime and thermal diffusion process in the optically thick regime automatically. At the same time, the coupled macroscopic energy equations for the photon and material are solved implicitly by the matrix-free source iteration method. With the wave-particle decomposition strategy, the UGKWP method has a dynamic adaptivity for different regime physics. In the optically thick regime, no particles will be sampled in the computational domain and the thermal diffusion solution for the photon transport will be recovered. While in the optically thin regime, stochastic particles will play a dominant role in the evolution and the non-equilibrium free transport of photon is automatically followed. In the frequency-dependent transport, the frequency carried by the simulating particle will be determined by a linear-frequency sampling strategy. In addition, to better resolve the sharp of opacity in the photon transport across a cell interface, the free streaming time of simulating particle in the UGKWP method will be reset when it passes through the interface. Moreover, the numerical relaxation time is properly defined to increase the particle proportion in the sharp opacity transition region in order to avoid numerical oscillation. Several typical test cases for the RTE system have been calculated to demonstrate the accuracy and reliability of the current frequency-dependent UGKWP method.
△ Less
Submitted 28 December, 2023;
originally announced December 2023.
-
Optimize electron beam energy toward in-situ imaging of large thick bio-samples with nanometer resolution
Authors:
Xi Yang,
Victor Smaluk,
Timur Shaftan
Abstract:
To optimize electron energy toward in-situ imaging large bio-samples up to 10-um thickness with nanoscale resolution, we implemented an analytical model based on elastic and inelastic characteristic angles [1]. This model can be used to predict the transverse beam size broadening as a function of electron energy while the probe beam traverses through the sample. As result, the optimal choice of th…
▽ More
To optimize electron energy toward in-situ imaging large bio-samples up to 10-um thickness with nanoscale resolution, we implemented an analytical model based on elastic and inelastic characteristic angles [1]. This model can be used to predict the transverse beam size broadening as a function of electron energy while the probe beam traverses through the sample. As result, the optimal choice of the electron beam energy can be realized. While the sample thickness is less than 10 um, there exists an optimal electron beam energy below 10 MeV regarding a specific sample thickness. However, for samples thicker than 10 um, the optimal beam energy is 10 MeV, and the ultimate resolution could become worse with the increase of the sample thickness.
△ Less
Submitted 25 December, 2023;
originally announced December 2023.
-
Poisson-Boltzmann based machine learning (PBML) model for electrostatic analysis
Authors:
Jiahui Chen,
Yongjia Xu,
Xin Yang,
Zixuan Cang,
Weihua Geng,
Guo-Wei Wei
Abstract:
Electrostatics is of paramount importance to chemistry, physics, biology, and medicine. The Poisson-Boltzmann (PB) theory is a primary model for electrostatic analysis. However, it is highly challenging to compute accurate PB electrostatic solvation free energies for macromolecules due to the nonlinearity, dielectric jumps, charge singularity , and geometric complexity associated with the PB equat…
▽ More
Electrostatics is of paramount importance to chemistry, physics, biology, and medicine. The Poisson-Boltzmann (PB) theory is a primary model for electrostatic analysis. However, it is highly challenging to compute accurate PB electrostatic solvation free energies for macromolecules due to the nonlinearity, dielectric jumps, charge singularity , and geometric complexity associated with the PB equation. The present work introduces a PB based machine learning (PBML) model for biomolecular electrostatic analysis. Trained with the second-order accurate MIBPB solver, the proposed PBML model is found to be more accurate and faster than several eminent PB solvers in electrostatic analysis. The proposed PBML model can provide highly accurate PB electrostatic solvation free energy of new biomolecules or new conformations generated by molecular dynamics with much reduced computational cost.
△ Less
Submitted 29 November, 2023;
originally announced December 2023.
-
Time-interval Measurement with Linear Optical Sampling at the Femtosecond Level
Authors:
Dongrui Yu,
Ziyang Chen,
Xuan Yang,
Yunlong Xu,
Ziyi **,
Panxue Ma,
Yufei Zhang,
Song Yu,
Bin Luo,
Hong Guo
Abstract:
High-precision time-interval measurement is a fundamental technique in many advanced applications, including time and distance metrology, particle physics, and ultra-precision machining. However, many of these applications are confined by the imprecise time-interval measurement of electrical signals, restricting the performance of the ultimate system to a few picoseconds, which limits ultra-high-p…
▽ More
High-precision time-interval measurement is a fundamental technique in many advanced applications, including time and distance metrology, particle physics, and ultra-precision machining. However, many of these applications are confined by the imprecise time-interval measurement of electrical signals, restricting the performance of the ultimate system to a few picoseconds, which limits ultra-high-precision applications. Here, we demonstrate an optical means of the time-interval measurement of electrical signals that can successfully achieve femtosecond (fs)-level precision. The setup is established using the optical-frequency-comb (OFC)-based linear optical sampling technique to realize timescale-stretched measurement. We achieve the measurement precision of 82 fs for a single LOS scan measurement and 3.05 fs for the 100-times average with post-processing, which is three orders of magnitude higher than the results of older electrical methods. The high-precision time interval measurement of electrical signals can substantially improve precision measurement technologies.
△ Less
Submitted 16 December, 2023;
originally announced December 2023.
-
Pixel detector hybridization and integration with anisotropic conductive adhesives
Authors:
Alexander Volker,
Janis Viktor Schmidt,
Dominik Dannheim,
Peter Svihra,
Mateus Vicente Barreto Pinto,
Rui de Oliveira,
Justus Braach,
Xiao Yang,
Marie Ruat,
Débora Magalhaes,
Matteo Centis Vignali,
Giovanni Calderini,
Helge Kristiansen
Abstract:
A reliable and cost-effective interconnect technology is required for the development of hybrid pixel detectors. The interconnect technology needs to be adapted for the pitch and die sizes of the respective applications. For small-scale applications and during the ASIC and sensor development phase, interconnect technologies must also be suitable for the assembly of single-dies typically available…
▽ More
A reliable and cost-effective interconnect technology is required for the development of hybrid pixel detectors. The interconnect technology needs to be adapted for the pitch and die sizes of the respective applications. For small-scale applications and during the ASIC and sensor development phase, interconnect technologies must also be suitable for the assembly of single-dies typically available from Multi-Project-Wafer submissions. Within the CERN EP R&D program and the AIDAinnova collaboration, innovative and scalable hybridization concepts are under development for pixel-detector applications in future colliders. This contribution presents recent results of a newly developed in-house single-die interconnection process based on Anisotropic Conductive Adhesives (ACA). The ACA interconnect technology replaces solder bumps with conductive micro-particles embedded in an epoxy layer applied as either film or paste. The electro-mechanical connection between the sensor and ASIC is achieved via thermocompression of the ACA using a flip-chip device bonder. A specific pixel-pad topology is required to enable the connection via micro-particles and create cavities into which excess epoxy can flow. This pixel-pad topology is achieved with an in-house Electroless Nickel Immersion Gold process that is also under development within the project. The ENIG and ACA processes are qualified with a variety of different ASICs, sensors, and dedicated test structures, with pad diameters ranging from 12 μm to 140 μm and pitches between 20 μm and 1.3 mm. The produced assemblies are characterized electrically, with radioactive-source exposures, and in tests with high-momentum particle beams. A focus is placed on recent optimization of the plating and interconnect processes, resulting in an improved plating uniformity and interconnect yield.
△ Less
Submitted 18 March, 2024; v1 submitted 15 December, 2023;
originally announced December 2023.
-
Transport response of topological hinge modes in $α$-Bi$_4$Br$_4$
Authors:
Md Shafayat Hossain,
Qi Zhang,
Zhiwei Wang,
Nikhil Dhale,
Wenhao Liu,
Maksim Litskevich,
Brian Casas,
Nana Shumiya,
Jia-Xin Yin,
Tyler A. Cochran,
Yongkai Li,
Yu-Xiao Jiang,
Ying Yang,
Guangming Cheng,
Zi-Jia Cheng,
Xian P. Yang,
Nan Yao,
Titus Neupert,
Luis Balicas,
Yugui Yao,
Bing Lv,
M. Zahid Hasan
Abstract:
Electronic topological phases are renowned for their unique properties, where conducting surface states exist on the boundary of an insulating three-dimensional bulk. While the transport response of the surface states has been extensively studied, the response of the topological hinge modes remains elusive. Here, we investigate a layered topological insulator $α$-Bi$_4$Br$_4$, and provide the firs…
▽ More
Electronic topological phases are renowned for their unique properties, where conducting surface states exist on the boundary of an insulating three-dimensional bulk. While the transport response of the surface states has been extensively studied, the response of the topological hinge modes remains elusive. Here, we investigate a layered topological insulator $α$-Bi$_4$Br$_4$, and provide the first evidence for quantum transport in gapless topological hinge states existing within the insulating bulk and surface energy gaps. Our magnetoresistance measurements reveal pronounced h/e periodic (where h denotes Planck's constant and e represents the electron charge) Aharonov-Bohm oscillation. The observed periodicity, which directly reflects the enclosed area of phase-coherent electron propagation, matches the area enclosed by the sample hinges, providing compelling evidence for the quantum interference of electrons circumnavigating around the hinges. Notably, the h/e oscillations evolve as a function of magnetic field orientation, following the interference paths along the hinge modes that are allowed by topology and symmetry, and in agreement with the locations of the hinge modes according to our scanning tunneling microscopy images. Remarkably, this demonstration of quantum transport in a topological insulator can be achieved using a flake geometry and we show that it remains robust even at elevated temperatures. Our findings collectively reveal the quantum transport response of topological hinge modes with both topological nature and quantum coherence, which can be directly applied to the development of efficient quantum electronic devices.
△ Less
Submitted 14 February, 2024; v1 submitted 14 December, 2023;
originally announced December 2023.
-
Ground Calibration Result of the Lobster Eye Imager for Astronomy
Authors:
Huaqing Cheng,
Zhixing Ling,
Chen Zhang,
Xiao** Sun,
Shengli Sun,
Yuan Liu,
Yanfeng Dai,
Zhenqing Jia,
Haiwu Pan,
Wenxin Wang,
Donghua Zhao,
Yifan Chen,
Zhiwei Cheng,
Wei Fu,
Yixiao Han,
Junfei Li,
Zhengda Li,
Xiaohao Ma,
Yulong Xue,
Ailiang Yan,
Qiang Zhang,
Yusa Wang,
Xiongtao Yang,
Zijian Zhao,
Weimin Yuan
Abstract:
We report on results of the on-ground X-ray calibration of the Lobster Eye Imager for Astronomy (LEIA), an experimental space wide-field (18.6*18.6 square degrees) X-ray telescope built from novel lobster eye mirco-pore optics. LEIA was successfully launched on July 27, 2022 onboard the SATech-01 satellite. To achieve full characterisation of its performance before launch, a series of tests and ca…
▽ More
We report on results of the on-ground X-ray calibration of the Lobster Eye Imager for Astronomy (LEIA), an experimental space wide-field (18.6*18.6 square degrees) X-ray telescope built from novel lobster eye mirco-pore optics. LEIA was successfully launched on July 27, 2022 onboard the SATech-01 satellite. To achieve full characterisation of its performance before launch, a series of tests and calibrations have been carried out at different levels of devices, assemblies and the complete module. In this paper, we present the results of the end-to-end calibration campaign of the complete module carried out at the 100-m X-ray Test Facility at IHEP. The PSF, effective area and energy response of the detectors were measured in a wide range of incident directions at several X-ray line energies. The distributions of the PSF and effective areas are roughly uniform across the FoV, in large agreement with the prediction of lobster-eye optics. The mild variations and deviations from the prediction of idealized lobster-eye optics can be understood to be caused by the imperfect shapes and alignment of the micro-pores as well as the obscuration by the supporting frames, which can be well reproduced by MC simulations. The spatial resolution of LEIA defined by the FWHM of the focal spot ranges from 4-8 arcmin with a median of 5.7. The measured effective areas are in range of 2-3 $cm^2$ at ~1.25 keV across the entire FoV, and its dependence on photon energy is in large agreement with simulations. The gains of the CMOS sensors are in range of 6.5-6.9 eV/DN, and the energy resolutions in the range of ~120-140 eV at 1.25 keV and ~170-190 eV at 4.5 keV. These results have been ingested into the calibration database and applied to the analysis of the scientific data acquired by LEIA. This work paves the way for the calibration of the Wide-field X-Ray Telescope modules of the Einstein Probe mission.
△ Less
Submitted 11 December, 2023;
originally announced December 2023.