Showing 1–50 of 80 results for author: Yang, A

Photonic quasicrystal of spin angular momentum

Authors: Min Lin, Xinxin Gou, Zhenwei Xie, Ai** Yang, Lu** Du, Xiaocong Yuan

Abstract: Quasicrystals,characterized by long-range order without translational symmetry,have catalyzed transformative advances in various fields,including optics in terms of field quasicrystals.Here,we present the first demonstration of photonic quasicrystals formed by spin angular momentum, unveiling novel spin-orbit coupling effects absent in traditional field quasicrystals.A de Bruijn tiling like theore… ▽ More Quasicrystals,characterized by long-range order without translational symmetry,have catalyzed transformative advances in various fields,including optics in terms of field quasicrystals.Here,we present the first demonstration of photonic quasicrystals formed by spin angular momentum, unveiling novel spin-orbit coupling effects absent in traditional field quasicrystals.A de Bruijn tiling like theoretical framework was built elucidating the formation mechanism of spin quasicrystals for diverse symmetries.Moreover,the configurations of these spin textures can be manipulated through the adjustments of the wavefronts,among which phason-like discontinuous dynamics is observed and quantitatively measured. Unlike optical quasicrystals shaped by electromagnetic fields,these spin-governed quasicrystals exhibit quasi-periodic properties of kinematic parameters,extending their potential applications to other physical systems. These findings hold promise for novel advancements in optical trap**,quasicrystal fabrication,and optical encryption systems. △ Less

Submitted 12 July, 2024; originally announced July 2024.

CMOS-compatible Strain Engineering for High-Performance Monolayer Semiconductor Transistors

Authors: Marc Jaikissoon, Çağıl Köroğlu, Jerry A. Yang, Kathryn M. Neilson, Krishna C. Saraswat, Eric Pop

Abstract: Strain engineering has played a key role in modern silicon electronics, having been introduced as a mobility booster in the 1990s and commercialized in the early 2000s. Achieving similar advances with two-dimensional (2D) semiconductors in a CMOS (complementary metal oxide semiconductor) compatible manner would radically improve the industrial viability of 2D transistors. Here, we show silicon nit… ▽ More Strain engineering has played a key role in modern silicon electronics, having been introduced as a mobility booster in the 1990s and commercialized in the early 2000s. Achieving similar advances with two-dimensional (2D) semiconductors in a CMOS (complementary metal oxide semiconductor) compatible manner would radically improve the industrial viability of 2D transistors. Here, we show silicon nitride cap** layers can impart strain to monolayer MoS2 transistors on conventional silicon substrates, enhancing their electrical performance with a low thermal budget (350 °C), CMOS-compatible approach. Strained back-gated and dual-gated MoS2 transistors demonstrate median increases up to 60% and 45% in on-state current, respectively. The greatest improvements are found when both transistor channels and contacts are reduced to ~200 nm, reaching saturation currents of 488 uA/um, higher than any previous reports at such short contact pitch. Simulations reveal that most benefits arise from tensile strain lowering the contact Schottky barriers, and that further reducing device dimensions (including contacts) will continue to offer increased strain and performance improvements. △ Less

Submitted 29 June, 2024; v1 submitted 15 May, 2024; originally announced May 2024.

The prominent and heterogeneous gender disparities in scientific novelty: evidence from biomedical doctoral theses

Authors: Meijun Liu, Zihan Xie, Alex Jie Yang, Chao Yu, Jian Xu, Ying Ding, Yi Bu

Abstract: Scientific novelty is the essential driving force for research breakthroughs and innovation. However, little is known about how early-career scientists pursue novel research paths, and the gender disparities in this process. To address this research gap, this study investigates a comprehensive dataset of 279,424 doctoral theses in biomedical sciences authored by US Ph.D. graduates. Spanning from 1… ▽ More Scientific novelty is the essential driving force for research breakthroughs and innovation. However, little is known about how early-career scientists pursue novel research paths, and the gender disparities in this process. To address this research gap, this study investigates a comprehensive dataset of 279,424 doctoral theses in biomedical sciences authored by US Ph.D. graduates. Spanning from 1980 to 2016, the data originates from the ProQuest Dissertations & Theses Database. This study aims to shed light on Ph.D. students' pursuit of scientific novelty in their doctoral theses and assess gender-related differences in this process. Using a combinatorial approach and a pre-trained Bio-BERT model, we quantify the scientific novelty of doctoral theses based on bio-entities. Applying fractional logistic and quantile regression models, this study reveals a decreasing trend in scientific novelty over time and heterogeneous gender disparities in doctoral theses. Specifically, female students consistently exhibited lower scientific novelty levels than their male peers. When supervised by female advisors, students' theses are found to be less novel than those under male advisors. The significant interaction effect of female students and female advisors suggests that female advisors may amplify the gender disparity in scientific novelty. Moreover, heterogeneous gender disparities in scientific novelty are identified, with non-top-tier universities displaying more pronounced disparities, while the differences at higher percentile ranges were comparatively more minor. These findings indicate a potential underrepresentation of female scientists pursuing novel research during the early stages of their careers. Notably, the outcomes of this study hold significant policy implications for advancing the careers of female scientists. △ Less

Submitted 19 January, 2024; originally announced April 2024.

Computational Fluid Dynamics: its Carbon Footprint and Role in Carbon Emission Reduction

Authors: Xiang I A Yang, Wen Zhang, Mahdi Abkar, William Anderson

Abstract: Turbulent flow physics regulates the aerodynamic properties of lifting surfaces, the thermodynamic efficiency of vapor power systems, and exchanges of natural and anthropogenic quantities between the atmosphere and ocean, to name just a few applications. The dynamics of turbulent flows are described via numerical integration of the non-linear Navier-Stokes equation -- a procedure known as computat… ▽ More Turbulent flow physics regulates the aerodynamic properties of lifting surfaces, the thermodynamic efficiency of vapor power systems, and exchanges of natural and anthropogenic quantities between the atmosphere and ocean, to name just a few applications. The dynamics of turbulent flows are described via numerical integration of the non-linear Navier-Stokes equation -- a procedure known as computational fluid dynamics (CFD). At the dawn of scientific computing in the late 1950s, it would be many decades before terms such as ``carbon footprint'' or ``sustainability'' entered the lexicon, and longer still before these themes attained national priority throughout advanced economies. This paper introduces a framework designed to calculate the carbon footprint of CFD and its contribution to carbon emission reduction strategies. We will distinguish between "hero" and "routine" calculations, noting that the carbon footprint of hero calculations is largely determined by the energy source mix utilized. We will also review CFD of flows where turbulence effects are modeled, thus reducing the degrees of freedom. Estimates of the carbon footprint are presented for such fully- and partially-resolved simulations as functions of turbulence activity and calculation year, demonstrating a reduction in carbon emissions by two to five orders of magnitude at practical conditions. Beyond analyzing CO2 emissions, we quantify the benefits of applying CFD towards overall carbon emission reduction. The community's effort to avoid redundant calculations via turbulence databases merits particular attention, with estimates indicating that a single database could potentially reduce CO2 emissions by approximately O(1) million metric tons. Additionally, implementing CFD in the fluids industry has markedly decreased dependence on wind tunnel testing, which is anticipated to lead to CO2 emission reduction. △ Less

Submitted 8 February, 2024; originally announced February 2024.

Comments: 18 pages, 6 figures

Towards End-to-End Structure Solutions from Information-Compromised Diffraction Data via Generative Deep Learning

Authors: Gabe Guo, Judah Goldfeder, Ling Lan, Aniv Ray, Albert Hanming Yang, Boyuan Chen, Simon JL Billinge, Hod Lipson

Abstract: The revolution in materials in the past century was built on a knowledge of the atomic arrangements and the structure-property relationship. The sine qua non for obtaining quantitative structural information is single crystal crystallography. However, increasingly we need to solve structures in cases where the information content in our input signal is significantly degraded, for example, due to o… ▽ More The revolution in materials in the past century was built on a knowledge of the atomic arrangements and the structure-property relationship. The sine qua non for obtaining quantitative structural information is single crystal crystallography. However, increasingly we need to solve structures in cases where the information content in our input signal is significantly degraded, for example, due to orientational averaging of grains, finite size effects due to nanostructure, and mixed signals due to sample heterogeneity. Understanding the structure property relationships in such situations is, if anything, more important and insightful, yet we do not have robust approaches for accomplishing it. In principle, machine learning (ML) and deep learning (DL) are promising approaches since they augment information in the degraded input signal with prior knowledge learned from large databases of already known structures. Here we present a novel ML approach, a variational query-based multi-branch deep neural network that has the promise to be a robust but general tool to address this problem end-to-end. We demonstrate the approach on computed powder x-ray diffraction (PXRD), along with partial chemical composition information, as input. We choose as a structural representation a modified electron density we call the Cartesian mapped electron density (CMED), that straightforwardly allows our ML model to learn material structures across different chemistries, symmetries and crystal systems. When evaluated on theoretically simulated data for the cubic and trigonal crystal systems, the system achieves up to $93.4\%$ average similarity with the ground truth on unseen materials, both with known and partially-known chemical composition information, showing great promise for successful structure solution even from degraded and incomplete input data. △ Less

Submitted 22 December, 2023; originally announced December 2023.

Observation of many-body dynamical localization

Authors: Yanliang Guo, Sudipta Dhar, Ang Yang, Zekai Chen, Hepeng Yao, Milena Horvath, Lei Ying, Manuele Landini, Hanns-Christoph Nägerl

Abstract: The quantum kicked rotor is a paradigmatic model system in quantum physics. As a driven quantum system, it is used to study the transition from the classical to the quantum world and to elucidate the emergence of chaos and diffusion. In contrast to its classical counterpart, it features dynamical localization, specifically Anderson localization in momentum space. The interacting many-body kicked r… ▽ More The quantum kicked rotor is a paradigmatic model system in quantum physics. As a driven quantum system, it is used to study the transition from the classical to the quantum world and to elucidate the emergence of chaos and diffusion. In contrast to its classical counterpart, it features dynamical localization, specifically Anderson localization in momentum space. The interacting many-body kicked rotor is believed to break localization, as recent experiments suggest. Here, we present evidence for many-body dynamical localization for the Lieb-Liniger version of the many-body quantum kicked rotor. After some initial evolution, the momentum distribution of interacting quantum-degenerate bosonic atoms in one-dimensional geometry, kicked hundreds of times by means of a pulsed sinusoidal potential, stops spreading. We quantify the arrested evolution by analysing the energy and the information entropy of the system as the interaction strength is tuned. In the limiting cases of vanishing and strong interactions, the first-order correlation function exhibits a very different decay behavior. Our results shed light on the boundary between the classical, chaotic world and the realm of quantum physics. △ Less

Submitted 21 December, 2023; originally announced December 2023.

Comments: 13 pages, 11 figures

Incorporating basic calibrations in existing machine-learned turbulence modeling

Authors: Jiaqi J. L. Li, Yuanwei Bin, George P. Huang, Xiang I. A. Yang

Abstract: This work aims to incorporate basic calibrations of Reynolds-averaged Navier-Stokes (RANS) models as part of machine learning (ML) frameworks. The ML frameworks considered are tensor-basis neural network (TBNN), physics-informed machine learning (PIML), and field inversion & machine learning (FIML) in J. Fluid Mech., 2016, 807, 155-166, Phys. Rev. Fluids, 2017, 2(3), 034603 and J. Comp. Phys., 201… ▽ More This work aims to incorporate basic calibrations of Reynolds-averaged Navier-Stokes (RANS) models as part of machine learning (ML) frameworks. The ML frameworks considered are tensor-basis neural network (TBNN), physics-informed machine learning (PIML), and field inversion & machine learning (FIML) in J. Fluid Mech., 2016, 807, 155-166, Phys. Rev. Fluids, 2017, 2(3), 034603 and J. Comp. Phys., 2016, 305, 758-774, and the baseline RANS models are the one-equation Spalart-Allmaras model, the two-equation $k$-$ω$ model, and the seven-equation Reynolds stress transport models. ML frameworks are trained against plane channel flow and shear-layer flow data. We compare the ML frameworks and study whether the machine-learned augmentations are detrimental outside the training set. The findings are summarized as follows. The augmentations due to TBNN are detrimental. PIML leads to augmentations that are beneficial inside the training dataset but detrimental outside it. These results are not affected by the baseline RANS model. FIML's augmentations to the two eddy viscosity models, where an inner-layer treatment already exists, are largely neutral. Its augmentation to the seven-equation model, where an inner-layer treatment does not exist, improves the mean flow prediction in a channel. Furthermore, these FIML augmentations are mostly non-detrimental outside the training dataset. In addition to reporting these results, the paper offers physical explanations of the results. Last, we note that the conclusions drawn here are confined to the ML frameworks and the flows considered in this study. More detailed comparative studies and validation & verification studies are needed to account for developments in recent years. △ Less

Submitted 14 November, 2023; v1 submitted 6 November, 2023; originally announced November 2023.

Constrained re-calibration of Reynolds-averaged Navier-Stokes models

Authors: Yuanwei Bin, George Huang, Robert Kunz, Xiang I A Yang

Abstract: The constants and functions in Reynolds-averaged Navier Stokes (RANS) turbulence models are coupled. Consequently, modifications of a RANS model often negatively impact its basic calibrations, which is why machine-learned augmentations are often detrimental outside the training dataset. A solution to this is to identify the degrees of freedom that do not affect the basic calibrations and only modi… ▽ More The constants and functions in Reynolds-averaged Navier Stokes (RANS) turbulence models are coupled. Consequently, modifications of a RANS model often negatively impact its basic calibrations, which is why machine-learned augmentations are often detrimental outside the training dataset. A solution to this is to identify the degrees of freedom that do not affect the basic calibrations and only modify these identified degrees of freedom when re-calibrating the baseline model to accommodate a specific application. This approach is colloquially known as the "rubber-band" approach, which we formally call "constrained model re-calibration" in this article. To illustrate the efficacy of the approach, we identify the degrees of freedom in the Spalart-Allmaras (SA) model that do not affect the log law calibration. By subsequently interfacing data-based methods with these degrees of freedom, we train models to solve historically challenging flow scenarios, including the round-jet/plane-jet anomaly, airfoil stall, secondary flow separation, and recovery after separation. In addition to good performance inside the training dataset, the trained models yield similar performance as the baseline model outside the training dataset. △ Less

Submitted 13 October, 2023; originally announced October 2023.

Large-eddy simulation of separated flows on unconventionally coarse grids

Authors: Yuanwei Bin, George I. Park, Yu Lv, Xiang I. A. Yang

Abstract: We examine and benchmark the emerging idea of applying the large-eddy simulation (LES) formalism to unconventionally coarse grids where RANS would be considered more appropriate at first glance. We distinguish this idea from very-large-eddy-simulation (VLES) and detached-eddy-simulation (DES), which require switching between RANS and LES formalism. LES on RANS grid is appealing because first, it r… ▽ More We examine and benchmark the emerging idea of applying the large-eddy simulation (LES) formalism to unconventionally coarse grids where RANS would be considered more appropriate at first glance. We distinguish this idea from very-large-eddy-simulation (VLES) and detached-eddy-simulation (DES), which require switching between RANS and LES formalism. LES on RANS grid is appealing because first, it requires minimal changes to a production code; second, it is more cost-effective than LES; third, it converges to LES; and most importantly, it accurately predicts flows with separation. This work quantifies the benefit of LES on RANS-like grids as compared to RANS on the same grids. Three canonical cases are considered: periodic hill, backward-facing step, and jet in cross flow. We conduct direct numerical simulation (DNS), proper LES on LES grids, LES on RANS-quality grids, and RANS. We show that while the LES solutions on the RANS-quality grids are not grid converged, they are twice as accurate as the RANS on the same grids. △ Less

Submitted 13 October, 2023; originally announced October 2023.

A priori screening of data-enabled turbulence models

Authors: Peng E S Chen, Yuanwei Bin, Xiang I A Yang, Yipeng Shi, Mahdi Abkar, George I. Park

Abstract: Assessing the compliance of a white-box turbulence model with known turbulent knowledge is straightforward. It enables users to screen conventional turbulence models and identify apparent inadequacies, thereby allowing for a more focused and fruitful validation and verification. However, comparing a black-box machine-learning model to known empirical scalings is not straightforward. Unless one imp… ▽ More Assessing the compliance of a white-box turbulence model with known turbulent knowledge is straightforward. It enables users to screen conventional turbulence models and identify apparent inadequacies, thereby allowing for a more focused and fruitful validation and verification. However, comparing a black-box machine-learning model to known empirical scalings is not straightforward. Unless one implements and tests the model, it would not be clear if a machine-learning model, trained at finite Reynolds numbers preserves the known high Reynolds number limit. This is inconvenient, particularly because model implementation involves retraining and re-interfacing. This work attempts to address this issue, allowing fast a priori screening of machine-learning models that are based on feed-forward neural networks (FNN). The method leverages the mathematical theorems we present in the paper. These theorems offer estimates of a network's limits even when the exact weights and biases are unknown. For demonstration purposes, we screen existing machine-learning wall models and RANS models for their compliance with the log layer physics and the viscous layer physics in a priori manner. In addition, the theorems serve as essential guidelines for future machine-learning models. △ Less

Submitted 13 October, 2023; originally announced October 2023.

Multifunctional magnetic oxide-MoS$_2$ heterostructures on silicon

Authors: Allen Jian Yang, Liang Wu, Yanran Liu, Xinyu Zhang, Kun Han, Ying Huang, Shengyao Li, Xian Jun Loh, Qiang Zhu, Rui Su, Ce-Wen Nan, X. Renshaw Wang

Abstract: Correlated oxides and related heterostructures are intriguing for develo** future multifunctional devices by exploiting their exotic properties, but their integration with other materials, especially on Si-based platforms, is challenging. Here, van der Waals heterostructures of La$_{0.7}$Sr$_{0.3}$MnO$_3$ (LSMO), a correlated manganite perovskite, and MoS$_2$ are demonstrated on Si substrates wi… ▽ More Correlated oxides and related heterostructures are intriguing for develo** future multifunctional devices by exploiting their exotic properties, but their integration with other materials, especially on Si-based platforms, is challenging. Here, van der Waals heterostructures of La$_{0.7}$Sr$_{0.3}$MnO$_3$ (LSMO), a correlated manganite perovskite, and MoS$_2$ are demonstrated on Si substrates with multiple functions. To overcome the problems due to the incompatible growth process, technologies involving freestanding LSMO membranes and van der Waals force-mediated transfer are used to fabricate the LSMO-MoS$_2$ heterostructures. The LSMO-MoS$_2$ heterostructures exhibit a gate-tunable rectifying behavior, based on which metal-semiconductor field-effect transistors (MESFETs) with on-off ratios of over 104 can be achieved. The LSMO-MoS$_2$ heterostructures can function as photodiodes displaying considerable open-circuit voltages and photocurrents. In addition, the colossal magnetoresistance of LSMO endows the LSMO-MoS$_2$ heterostructures with an electrically tunable magnetoresponse at room temperature. This work not only proves the applicability of the LSMO-MoS$_2$ heterostructure devices on Si-based platform but also demonstrates a paradigm to create multifunctional heterostructures from materials with disparate properties. △ Less

Submitted 11 October, 2023; originally announced October 2023.

Journal ref: Advanced Materials 35, 2302620 (2023)

Efficient Creation of Ultracold Ground State $^{6}\textrm{Li}^{40}\textrm{K}$ Polar Molecules

Authors: Canming He, Xiaoyu Nie, Victor Avalos, Sofia Botsi, Sunil Kumar, Anbang Yang, Kai Dieckmann

Abstract: We report the creation of ultracold ground state $^{6}\textrm{Li}^{40}\textrm{K}$ polar molecules with high efficiency. Starting from weakly-bound molecules state, stimulated Raman adiabatic passage (STIRAP) is adopted to coherently transfer the molecules to their singlet ro-vibrational ground state $|\textrm{X}^{1}Σ^{+},v=0,J=0>$. By employing a singlet STIRAP pathway and low-phase-noise narrow-l… ▽ More We report the creation of ultracold ground state $^{6}\textrm{Li}^{40}\textrm{K}$ polar molecules with high efficiency. Starting from weakly-bound molecules state, stimulated Raman adiabatic passage (STIRAP) is adopted to coherently transfer the molecules to their singlet ro-vibrational ground state $|\textrm{X}^{1}Σ^{+},v=0,J=0>$. By employing a singlet STIRAP pathway and low-phase-noise narrow-linewidth lasers, we observed a one-way transfer efficiency of 96(4)\,\%. Held in an optical dipole trap, the lifetime of the ground-state molecules is measured to be 5.0(3)\,ms. The large permanent dipole moment of LiK is confirmed by applying a DC electric field on the molecules and performing Stark shift spectroscopy of the ground state. With recent advances in the quantum control of collisions, our work paves the way for exploring quantum many-body physics with strongly-interacting $^{6}\textrm{Li}^{40}\textrm{K}$ molecules. △ Less

Submitted 5 October, 2023; originally announced October 2023.

Comments: 6 pages, 6 figures

The hidden spin-momentum locking and topological defects in unpolarized light fields

Authors: Peng Shi, Min Lin, Xinxin Gou, Lu** Du, Ai** Yang, Xiaocong Yuan

Abstract: Electromagnetic waves characterized by intensity, phase, and polarization degrees of freedom are widely applied in data storage, encryption, and communications. However, these properties can be substantially affected by phase disorders and disturbances, whereas high-dimensional degrees of freedom including momentum and angular momentum of electromagnetic waves can offer new insights into their fea… ▽ More Electromagnetic waves characterized by intensity, phase, and polarization degrees of freedom are widely applied in data storage, encryption, and communications. However, these properties can be substantially affected by phase disorders and disturbances, whereas high-dimensional degrees of freedom including momentum and angular momentum of electromagnetic waves can offer new insights into their features and phenomena, for example topological characteristics and structures that are robust to these disturbances. Here, we discover and demonstrate theoretically and experimentally spin-momentum locking and topological defects in unpolarized light. The coherent spin is locked to the kinetic momentum except for a small coupling spin term, due to the simultaneous presence of transverse magnetic and electric components in unpolarized light. To cancel the coupling term, we employ a metal film acting as a polarizer to form some skyrmion-like spin textures at the metal/air interface. Using an in-house scanning optical microscopic system to image the out-of-plane spin density of the focused unpolarized vortex light, we obtained experimental results that coincide well with our theoretical predictions. The theory and technique promote the applications of topological defects in optical data storage, encryption, and decryption, and communications. △ Less

Submitted 25 September, 2023; originally announced September 2023.

Comments: 9 pages, 3 figures, 47 references

Biaxial Tensile Strain Enhances Electron Mobility of Monolayer Transition Metal Dichalcogenides

Authors: Jerry A. Yang, Robert K. A. Bennett, Lauren Hoang, Zhepeng Zhang, Kamila J. Thompson, Antonios Michail, John Parthenios, Konstantinos Papagelis, Andrew J. Mannix, Eric Pop

Abstract: Strain engineering can modulate the material properties of two-dimensional (2D) semiconductors for electronic and optoelectronic applications. Recent theory and experiments have found that uniaxial tensile strain can improve the electron mobility of monolayer MoS$_2$, a 2D semiconductor, but the effects of biaxial strain on charge transport are not well-understood in 2D semiconductors. Here, we us… ▽ More Strain engineering can modulate the material properties of two-dimensional (2D) semiconductors for electronic and optoelectronic applications. Recent theory and experiments have found that uniaxial tensile strain can improve the electron mobility of monolayer MoS$_2$, a 2D semiconductor, but the effects of biaxial strain on charge transport are not well-understood in 2D semiconductors. Here, we use biaxial tensile strain on flexible substrates to probe the electron mobility in monolayer WS$_2$ and MoS$_2$ transistors. This approach experimentally achieves ~2x higher on-state current and mobility with ~0.3% applied biaxial strain in WS$_2$, the highest mobility improvement at the lowest strain reported to date. We also examine the mechanisms behind this improvement through density functional theory simulations, concluding that the enhancement is primarily due to reduced intervalley electron-phonon scattering. These results underscore the role of strain engineering 2D semiconductors for flexible electronics, sensors, integrated circuits, and other optoelectronic applications. △ Less

Submitted 28 November, 2023; v1 submitted 19 September, 2023; originally announced September 2023.

Comments: Corrected author list

Progressive augmentation of Reynolds stress tensor models for secondary flow prediction by computational fluid dynamics driven surrogate optimisation

Authors: M. J. Rincón, A. Amarloo, M. Reclari, X. I. A. Yang, M. Abkar

Abstract: Generalisability and the consistency of the a posteriori results are the most critical points of view regarding data-driven turbulence models. This study presents a progressive improvement of turbulence models using simulation-driven surrogate optimisation based on Kriging. We aim for the augmentation of secondary-flow reconstruction capability in a linear eddy-viscosity model without violating it… ▽ More Generalisability and the consistency of the a posteriori results are the most critical points of view regarding data-driven turbulence models. This study presents a progressive improvement of turbulence models using simulation-driven surrogate optimisation based on Kriging. We aim for the augmentation of secondary-flow reconstruction capability in a linear eddy-viscosity model without violating its original performance on canonical cases e.g. channel flow. Explicit algebraic Reynolds stress correction models (EARSCMs) for $k-ω$ SST turbulence model are obtained to predict the secondary flow which the standard model fails to capture. The optimisation of the models is achieved by a multi-objective approach based on duct flow quantities, and numerical verification of the developed models is performed for various test cases. The results of testing new models on channel flow cases guarantee that new models preserve the performance of the original $k-ω$ SST model. Regarding the generalisability of the new models, results of unseen test cases demonstrate a significant improvement in the prediction of secondary flows and streamwise velocity. These results highlight the potential of the progressive approach to enhance the performance of data-driven turbulence models for fluid flow simulation while preserving the robustness and stability of the solver. △ Less

Submitted 3 November, 2023; v1 submitted 24 August, 2023; originally announced August 2023.

Comments: 25 pages, 24 figures

Half-Valley Ohmic Contact and Contact-Limited Valley-Contrasting Current Injection

Authors: Xukun Feng, Chit Siong Lau, Shi-Jun Liang, Ching Hua Lee, Shengyuan A. Yang, Yee Sin Ang

Abstract: Two-dimensional (2D) ferrovalley semiconductor (FVSC) with spontaneous valley polarization offers an exciting material platform for probing Berry phase physics. How FVSC can be incorporated in valleytronic device applications, however, remain an open question. Here we generalize the concept of metal/semiconductor (MS) contact into the realm of valleytronics. We propose a half-valley Ohmic contact… ▽ More Two-dimensional (2D) ferrovalley semiconductor (FVSC) with spontaneous valley polarization offers an exciting material platform for probing Berry phase physics. How FVSC can be incorporated in valleytronic device applications, however, remain an open question. Here we generalize the concept of metal/semiconductor (MS) contact into the realm of valleytronics. We propose a half-valley Ohmic contact based on FVSC/graphene heterostructure where the two valleys of FVSC separately forms Ohmic and Schottky contacts with those of graphene, thus allowing current to be valley-selectively injected through the `Ohmic' valley while being blocked in the `Schottky' valley. We develop a theory of contact-limited valley-contrasting current injection and demonstrate that such transport mechanism can produce gate-tunable valley-polarized injection current. Using RuCl$_2$/graphene heterostructure as an example, we illustrate a device concept of valleytronic barristor where high valley polarization efficiency and sizable current on/off ratio, can be achieved under experimentally feasible electrostatic gating conditions. These findings uncover contact-limited valley-contrasting current injection as an efficient mechanism for valley polarization manipulation, and reveals the potential of valleytronic MS contact as a functional building block of valleytronic device technology. △ Less

Submitted 9 August, 2023; v1 submitted 7 August, 2023; originally announced August 2023.

Comments: 9 pages, 5 figures

Emerging Optics from Structured Nanoscale Optical Cavities

Authors: Danqing Wang, Ankun Yang

Abstract: Miniaturized and rationally assembled nanostructures exhibit extraordinarily distinct physical properties beyond their individual units. This review will focus on structured small-scale optical cavities that show unique electromagnetic near fields and collective optical coupling. By harnessing different material systems and structural designs, various light-matter interactions can be engineered, s… ▽ More Miniaturized and rationally assembled nanostructures exhibit extraordinarily distinct physical properties beyond their individual units. This review will focus on structured small-scale optical cavities that show unique electromagnetic near fields and collective optical coupling. By harnessing different material systems and structural designs, various light-matter interactions can be engineered, such as nanoscale lasing, nonlinear optics, exciton-polariton coupling, and energy harvesting. Key device performance of nanoscale lasers, including low power threshold, optical multiplexing, and electrical pump, will be discussed. This review will also cover emerging applications of nanoscale optical cavities in quantum engineering and topological photonics. Structured nanocavities can serve as a scalable platform for integrated photonic circuits and hybrid quantum photonic systems. △ Less

Submitted 24 July, 2023; originally announced July 2023.

Design & Optimization of the HV divider for JUNO 20-inch PMT

Authors: Feng-Jiao Luo, Zhi-Min Wang, An-Bo Yang, Yue-Kun Heng, Zhong-Hua Qin, Mei-Hang Xu, Sen Qian, Shu-Lin Liu, Yi-Fang Wang, Wei Wang, Alexander Olshevskiy, Guo-Rui Huang, Zhen **, Ling Ren, Xing-Chao Wang, Shu-Guang Si, Jian-Ning Sun

Abstract: The Jiangmen Underground Observatory (JUNO) is a 20-kton liquid scintillator detector that employs 20,000 20-inch photomultiplier tubes (PMTs) as photon sensors, with 5,000 dynode-PMTs from HAMAMATSU Photonics K.K. (HPK), and 15,000 MCP-PMTs from North Night Vision Technology (NNVT) installed in pure water. JUNO aims to provide long-lasting and the best performance operation by utilizing a high-tr… ▽ More The Jiangmen Underground Observatory (JUNO) is a 20-kton liquid scintillator detector that employs 20,000 20-inch photomultiplier tubes (PMTs) as photon sensors, with 5,000 dynode-PMTs from HAMAMATSU Photonics K.K. (HPK), and 15,000 MCP-PMTs from North Night Vision Technology (NNVT) installed in pure water. JUNO aims to provide long-lasting and the best performance operation by utilizing a high-transparency liquid scintillator, high detection efficiency PMTs, and specially designed electronics including water-proof potting for the high voltage (HV) dividers of PMTs. In this paper, we present a summary of the design and optimization of HV dividers for both types of 20-inch PMTs, which includes collection efficiency, charge resolution, HV divider current, pulse shape, and maximum amplitude restriction. We have developed and finalized four schemes of the HV divider for different scenarios, including the final version selected by JUNO. All 20,000 20-inch PMTs have successfully undergone production and burning tests. △ Less

Submitted 19 July, 2023; originally announced July 2023.

Comments: 14pages,28figures

Extension of the law of the wall exploiting weak similarity of velocity fluctuations in turbulent channels

Authors: Christoffer Hansen, Jens N. Sørensen, Xiang I. A. Yang, Mahdi Abkar

Abstract: This paper explores the similarity of the streamwise velocity fluctuations in a channel. In the analysis, we employ a one-dimensional scalar variant of the proper orthogonal decomposition (POD). This approach naturally motivates the introduction of two different levels of similarity which we will refer to as strong and weak similarity. Strong similarity requires that the two-point correlation, and… ▽ More This paper explores the similarity of the streamwise velocity fluctuations in a channel. In the analysis, we employ a one-dimensional scalar variant of the proper orthogonal decomposition (POD). This approach naturally motivates the introduction of two different levels of similarity which we will refer to as strong and weak similarity. Strong similarity requires that the two-point correlation, and thus, all POD modes, show Reynolds number similarity, while weak similarity only requires that the first few POD modes show similarity. As POD concerns information at more than one location, these similarities are more general than various similarities found in the literature concerning single-point flow statistics. We examine flows at $Re_τ=$180, 540, 1000, and 5200. Strong similarity is observed in the viscous layer and the wake region, and weak similarity is found in both the viscous wall region and the outer part of the logarithmic layer. The presence of weak similarity suggests the existence of an extension to the law of the wall (LoW). We propose such an extension based on the results from the one-dimensional POD analysis. The usefulness of the LoW extension is then assessed by comparing flow reconstructions according to the conventional equilibrium LoW and the extended LoW. We show that the extended LoW provides accurate flow reconstructions in the wall layer, capturing fine-scale motions that are entirely missed by the equilibrium LoW. △ Less

Submitted 29 December, 2023; v1 submitted 29 June, 2023; originally announced June 2023.

Comments: 17 pages, 16 figures

Towards Sustainable Ultrawide Bandgap Van der Waals Materials: An ab initio Screening Effort

Authors: Chuin Wei Tan, Linqiang Xu, Chen Chen Er, Siang-Piao Chai, Boris Kozinsky, Hui Ying Yang, Shengyuan A. Yang, **g Lu, Yee Sin Ang

Abstract: The sustainable development of next-generation device technology is paramount in the face of climate change and the looming energy crisis. Tremendous efforts have been made in the discovery and design of nanomaterials that achieve device-level sustainability, where high performance and low operational energy cost are prioritized. However, many of such materials are composed of elements that are un… ▽ More The sustainable development of next-generation device technology is paramount in the face of climate change and the looming energy crisis. Tremendous efforts have been made in the discovery and design of nanomaterials that achieve device-level sustainability, where high performance and low operational energy cost are prioritized. However, many of such materials are composed of elements that are under threat of depletion and pose elevated risks to the environment. The role of material-level sustainability in computational screening efforts remains an open question thus far. Here we develop a general van der Waals materials screening framework imbued with sustainability-motivated search criteria. Using ultrawide bandgap (UWBG) materials as a backdrop -- an emerging materials class with great prospects in dielectric, power electronics, and ultraviolet device applications, we demonstrate how this screening framework results in 25 sustainable UWBG layered materials comprising only of low-risks elements. Our findings constitute a critical first-step towards reinventing a more sustainable electronics landscape beyond silicon, with the framework established in this work serving as a harbinger of sustainable 2D materials discovery. △ Less

Submitted 25 October, 2023; v1 submitted 26 June, 2023; originally announced June 2023.

Comments: 17 pages, 8 figures

Two-dimensional layered materials meet perovskite oxides: A combination for high-performance electronic devices

Authors: Allen Jian Yang, Su-Xi Wang, Jianwei Xu, Xian Jun Loh, Qiang Zhu, Xiao Renshaw Wang

Abstract: As the Si-based transistors scale down to atomic dimensions, the basic principle of current electronics, which heavily relies on the tunable charge degree of freedom, faces increasing challenges to meet the future requirements of speed, switching energy, heat dissipation, packing density as well as functionalities. Heterogeneous integration, where dissimilar layers of materials and functionalities… ▽ More As the Si-based transistors scale down to atomic dimensions, the basic principle of current electronics, which heavily relies on the tunable charge degree of freedom, faces increasing challenges to meet the future requirements of speed, switching energy, heat dissipation, packing density as well as functionalities. Heterogeneous integration, where dissimilar layers of materials and functionalities are unrestrictedly stacked at an atomic scale, is appealing to next-generation electronics, such as multi-functional, neuromorphic, spintronic and ultra-low power devices, because it unlocks technologically useful interfaces of distinct functionalities. Recently, the combination of functional perovskite oxides and the two-dimensional layered materials (2DLMs) led to unexpected functionalities and enhanced device performance. In this review, we review the recent progress of the heterogeneous integration of perovskite oxides and 2DLMs from the perspectives of fabrication and interfacial properties, electronic applications, challenges as well as outlooks. In particular, we focus on three types of attractive applications, namely field-effect transistors, memory, and neuromorphic electronics. The van der Waals integration approach is extendible to other oxides and 2DLMs, leading to almost unlimited combinations of oxides and 2DLMs and contributing to future high-performance electronic and spintronic devices. △ Less

Submitted 12 May, 2023; originally announced May 2023.

MSC Class: https://doi.org/10.1021/acsnano.3c00429

Journal ref: ACS nano 17, 11, 9748 (2023)

Log-law recovery through reinforcement-learning wall model for large-eddy simulation

Authors: Aurélien Vadrot, Xiang I. A. Yang, H. Jane Bae, Mahdi Abkar

Abstract: This paper focuses on the use of reinforcement learning (RL) as a machine-learning (ML) modeling tool for near-wall turbulence. RL has demonstrated its effectiveness in solving high-dimensional problems, especially in domains such as games. Despite its potential, RL is still not widely used for turbulence modeling and is primarily used for flow control and optimization purposes. A new RL wall mode… ▽ More This paper focuses on the use of reinforcement learning (RL) as a machine-learning (ML) modeling tool for near-wall turbulence. RL has demonstrated its effectiveness in solving high-dimensional problems, especially in domains such as games. Despite its potential, RL is still not widely used for turbulence modeling and is primarily used for flow control and optimization purposes. A new RL wall model (WM) called VYBA23 is developed in this work, which uses agents dispersed in the flow near the wall. The model is trained on a single Reynolds number ($Re_τ= 10^4$) and does not rely on high-fidelity data, as the back-propagation process is based on a reward rather than output error. The states of the RLWM, which are the representation of the environment by the agents, are normalized to remove dependence on the Reynolds number. The model is tested and compared to another RLWM (BK22) and to an equilibrium wall model, in a half-channel flow at eleven different Reynolds numbers ($Re_τ\in [180;10^{10}]$). The effects of varying agents' parameters such as actions range, time-step, and spacing are also studied. The results are promising, showing little effect on the average flow field but some effect on wall-shear stress fluctuations and velocity fluctuations. This work offers positive prospects for develo** RLWMs that can recover physical laws, and for extending this type of ML models to more complex flows in the future. △ Less

Submitted 2 May, 2023; v1 submitted 28 February, 2023; originally announced February 2023.

Comments: arXiv admin note: text overlap with arXiv:2211.03614

Survey of machine learning wall models for large eddy simulation

Authors: Aurélien Vadrot, Xiang I. A. Yang, Mahdi Abkar

Abstract: This survey investigates wall modeling in large eddy simulations (LES) using data-driven machine learning (ML) techniques. To this end, we implement three ML wall models in an open-source code and compare their performances with the equilibrium wall model in LES of half-channel flow at eleven friction Reynolds numbers between $180$ and $10^{10}$. The three models have ''seen'' flows at only a few… ▽ More This survey investigates wall modeling in large eddy simulations (LES) using data-driven machine learning (ML) techniques. To this end, we implement three ML wall models in an open-source code and compare their performances with the equilibrium wall model in LES of half-channel flow at eleven friction Reynolds numbers between $180$ and $10^{10}$. The three models have ''seen'' flows at only a few Reynolds numbers. We test if these ML wall models can extrapolate to unseen Reynolds numbers. Among the three models, two are supervised ML models, and one is a reinforcement learning ML model. The two supervised ML models are trained against direct numerical simulation (DNS) data, whereas the reinforcement learning ML model is trained in the context of a wall-modeled LES with no access to high-fidelity data. The two supervised ML models capture the law of the wall at both seen and unseen Reynolds numbers--although one model requires re-training and predicts a smaller von Kármán constant. The reinforcement learning model captures the law of the wall reasonably well but has errors at both low ($Re_τ<10^3$) and high Reynolds numbers ($Re_τ>10^6$). In addition to documenting the results, we try to ''understand'' why the ML models behave the way they behave. Analysis shows that the errors of the supervised ML model is a result of the network design and the errors in the reinforcement learning model arise due to the present choice of the ''states'' and the mismatch between the neutral line and the line separating the action map. In all, we see promises in data-driven machine learning models. △ Less

Submitted 22 May, 2023; v1 submitted 7 November, 2022; originally announced November 2022.

2D Janus Niobium Oxydihalide NbO$XY$: Multifunctional High-Mobility Piezoelectric Semiconductor for Electronics, Photonics and Sustainable Energy Applications

Authors: Tong Su, Ching Hua Lee, San-Dong Guo, Guangzhao Wang, Wee-Liat Ong, Weiwei Zhao, Shengyuan A. Yang, Yee Sin Ang

Abstract: Two-dimensional (2D) niobium oxydihalide NbOI$_2$ has been recently demonstrated as an excellent in-plane piezoelectric and nonlinear optical materials. Here we show that Janus niobium oxydihalide, NbO$XY$ (X, Y = Cl, Br, I and X$\neq$Y), is a multifunctional anisotropic semiconductor family with exceptional piezoelectric, electronic, photocatalytic and optical properties. NbO$XY$ are stable and m… ▽ More Two-dimensional (2D) niobium oxydihalide NbOI$_2$ has been recently demonstrated as an excellent in-plane piezoelectric and nonlinear optical materials. Here we show that Janus niobium oxydihalide, NbO$XY$ (X, Y = Cl, Br, I and X$\neq$Y), is a multifunctional anisotropic semiconductor family with exceptional piezoelectric, electronic, photocatalytic and optical properties. NbO$XY$ are stable and mechancially flexible monolayers with band gap around the visible light regime of $\sim 1.9$ eV. The anisotropic carrier mobility of NbO$XY$ lies in the range of $10^3 \sim 10^4$ cm$^2$V$^{-1}$s$^{-1}$, which represents some of the highest among 2D semiconductors of bandgap $\gtrsim 2$ eV. Inversion symmetry breaking in Janus NbO$XY$ generates sizable out-of-plane $d_{31}$ piezoelectric response while still retaining a strong in-plane piezoelectricity. Remarkably, NbO$XY$ exhibits an additional out-of-plane piezoelectric response, $d_{32}$ as large as 0.55 pm/V. G$_0$W$_0$-BSE calculation further reveals the strong linear optical dichroism of NbO$XY$ in the visible-to-ultraviolet regime. The optical absorption peaks with $14\sim18$ \% in the deep UV regime ($5\sim6$ eV), outperforming the vast majority of other 2D materials. The high carrier mobility, strong optical absorption, sizable built-in electric field and band alignment compatible with overall water splitting further suggest the strengths of NbO$XY$ in energy conversion application. We further propose a directional stress sensing device to demonstrate how the out-of-plane piezoelectricity can be harnessed for functional device applications. Our findings unveil NbO$XY$ as an exceptional multifunctional 2D semiconductor for flexible electronics, optoelectronics, UV photonics, piezoelectric and sustainable energy applications. △ Less

Submitted 3 November, 2022; v1 submitted 1 November, 2022; originally announced November 2022.

Comments: 16 Pages, 7 Figures, 3 Tables

Quantum Non-Demolition Measurement on the Spin Precession of Laser-Trapped $^{171}$Yb Atoms

Authors: Y. A. Yang, T. A. Zheng, S. -Z. Wang, W. -K. Hu, Chang-Ling Zou, T. Xia, Z. -T. Lu

Abstract: Quantum non-demolition (QND) measurement enhances the detection efficiency and measurement fidelity, and is highly desired for its applications in precision measurements and quantum information processing. We propose and demonstrate a QND measurement scheme for the spin states of laser-trapped atoms. On $^{171}$Yb atoms held in an optical dipole trap, a transition that is simultaneously cycling, s… ▽ More Quantum non-demolition (QND) measurement enhances the detection efficiency and measurement fidelity, and is highly desired for its applications in precision measurements and quantum information processing. We propose and demonstrate a QND measurement scheme for the spin states of laser-trapped atoms. On $^{171}$Yb atoms held in an optical dipole trap, a transition that is simultaneously cycling, spin-state selective, and spin-state preserving is created by introducing a circularly polarized beam of control laser to optically dress the spin states in the excited level, while leaving the spin states in the ground level unperturbed. We measure the phase of spin precession of $5\times10^{4}$ atoms in a bias magnetic field of 20 mG. This QND approach reduces the optical absorption detection noise by $\sim$19 dB, to a level of 2.3 dB below the atomic quantum projection noise. In addition to providing a general approach for efficient spin-state readout, this all-optical technique allows quick switching and real-time programming for quantum sensing and quantum information processing. △ Less

Submitted 16 September, 2022; originally announced September 2022.

Measurement of the Electric Dipole Moment of $^{171}$Yb Atoms in an Optical Dipole Trap

Authors: T. A. Zheng, Y. A. Yang, S. -Z. Wang, J. T. Singh, Z. -X. Xiong, T. Xia, Z. -T. Lu

Abstract: The permanent electric dipole moment (EDM) of the $^{171}$Yb $(I=1/2)$ atom is measured with atoms held in an optical dipole trap (ODT). By enabling a cycling transition that is simultaneously spin-selective and spin-preserving, a quantum non-demolition measurement with a spin-detection efficiency of 50$\%$ is realized. A systematic effect due to parity mixing induced by a static E field is observ… ▽ More The permanent electric dipole moment (EDM) of the $^{171}$Yb $(I=1/2)$ atom is measured with atoms held in an optical dipole trap (ODT). By enabling a cycling transition that is simultaneously spin-selective and spin-preserving, a quantum non-demolition measurement with a spin-detection efficiency of 50$\%$ is realized. A systematic effect due to parity mixing induced by a static E field is observed, and is suppressed by averaging between measurements with ODTs in opposite directions. The coherent spin precession time is found to be much longer than 300 s. The EDM is determined to be $d({\rm^{171}Yb})={\color{black}(-6.8\pm5.1_{\rm stat}\pm1.2_{\rm syst})\times10^{-27}\ e\ \rm cm}$, leading to an upper limit of $|d({\rm^{171}Yb})|<{\color{black}1.5\times10^{-26}\ e\ \rm cm}$ ($95\%$ C.L.). These measurement techniques can be adapted to search for the EDM of $^{225}$Ra. △ Less

Submitted 17 July, 2022; originally announced July 2022.

Cataloguing MoSi$_2$N$_4$ and WSi$_2$N$_4$ van der Waals Heterostructures: An Exceptional Material Platform for Excitonic Solar Cell Applications

Authors: Che Chen Tho, Chenjiang Yu, Qin Tang, Qianqian Wang, Tong Su, Zhuoer Feng, Qingyun Wu, C. V. Nguyen, Wee-Liat Ong, Shi-Jun Liang, San-Dong Guo, Liemao Cao, Shengli Zhang, Shengyuan A. Yang, Lay Kee Ang, Guangzhao Wang, Yee Sin Ang

Abstract: Two-dimensional (2D) materials van der Waals heterostructures (vdWHs) provides a revolutionary route towards high-performance solar energy conversion devices beyond the conventional silicon-based pn junction solar cells. Despite tremendous research progress accomplished in recent years, the searches of vdWHs with exceptional excitonic solar cell conversion efficiency and optical properties remain… ▽ More Two-dimensional (2D) materials van der Waals heterostructures (vdWHs) provides a revolutionary route towards high-performance solar energy conversion devices beyond the conventional silicon-based pn junction solar cells. Despite tremendous research progress accomplished in recent years, the searches of vdWHs with exceptional excitonic solar cell conversion efficiency and optical properties remain an open theoretical and experimental quest. Here we show that the vdWH family composed of MoSi$_2$N$_4$ and WSi$_2$N$_4$ monolayers provides a compelling material platform for develo** high-performance ultrathin excitonic solar cells and photonics devices. Using first-principle calculations, we construct and classify 51 types of MoSi$_2$N$_4$ and WSi$_2$N$_4$-based [(Mo,W)Si$_2$N$_4$] vdWHs composed of various metallic, semimetallic, semiconducting, insulating and topological 2D materials. Intriguingly, MoSi$_2$N$_4$/(InSe, WSe$_2$) are identified as Type-II vdWHs with exceptional excitonic solar cell power conversion efficiency reaching well over 20%, which are competitive to state-of-art silicon solar cells. The (Mo,W)Si$_2$N$_4$ vdWH family exhibits strong optical absorption in both the visible and ultraviolet regimes. Exceedingly large peak ultraviolet absorptions over 40%, approaching the maximum absorption limit of a free-standing 2D material, can be achieved in (Mo,W)Si$_2$N$_4$/$α_2$-(Mo,W)Ge$_2$P$_4$ vdWHs. Our findings unravel the enormous potential of (Mo,W)Si$_2$N$_4$ vdWHs in designing ultimately compact excitonic solar cell device technology. △ Less

Submitted 4 July, 2022; v1 submitted 23 June, 2022; originally announced June 2022.

Comments: 30 pages, 7 figures

Prospects for Detecting the Diffuse Supernova Neutrino Background with JUNO

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli, Thilo Birkenfeld, Sylvie Blin , et al. (577 additional authors not shown)

Abstract: We present the detection potential for the diffuse supernova neutrino background (DSNB) at the Jiangmen Underground Neutrino Observatory (JUNO), using the inverse-beta-decay (IBD) detection channel on free protons. We employ the latest information on the DSNB flux predictions, and investigate in detail the background and its reduction for the DSNB search at JUNO. The atmospheric neutrino induced n… ▽ More We present the detection potential for the diffuse supernova neutrino background (DSNB) at the Jiangmen Underground Neutrino Observatory (JUNO), using the inverse-beta-decay (IBD) detection channel on free protons. We employ the latest information on the DSNB flux predictions, and investigate in detail the background and its reduction for the DSNB search at JUNO. The atmospheric neutrino induced neutral current (NC) background turns out to be the most critical background, whose uncertainty is carefully evaluated from both the spread of model predictions and an envisaged \textit{in situ} measurement. We also make a careful study on the background suppression with the pulse shape discrimination (PSD) and triple coincidence (TC) cuts. With latest DSNB signal predictions, more realistic background evaluation and PSD efficiency optimization, and additional TC cut, JUNO can reach the significance of 3$σ$ for 3 years of data taking, and achieve better than 5$σ$ after 10 years for a reference DSNB model. In the pessimistic scenario of non-observation, JUNO would strongly improve the limits and exclude a significant region of the model parameter space. △ Less

Submitted 13 October, 2022; v1 submitted 18 May, 2022; originally announced May 2022.

Comments: 29 pages, 11 figures, final published version in JCAP

Journal ref: JCAP 10 (2022) 033

Designing Ultra-Flat Bands in Twisted Bilayer Materials at Large Twist Angles without specific degree

Authors: Shengdan Tao, Xuanlin Zhang, Jiaojiao Zhu, Pimo He, Shengyuan A. Yang, Yunhao Lu, Su-Huai Wei

Abstract: Inter-twisted bilayers of two-dimensional (2D) materials can host low-energy flat bands, which offer opportunity to investigate many intriguing physics associated with strong electron correlations. In the existing systems, ultra-flat bands only emerge at very small twist angles less than a few degrees, which poses challenge for experimental study and practical applications. Here, we propose a new… ▽ More Inter-twisted bilayers of two-dimensional (2D) materials can host low-energy flat bands, which offer opportunity to investigate many intriguing physics associated with strong electron correlations. In the existing systems, ultra-flat bands only emerge at very small twist angles less than a few degrees, which poses challenge for experimental study and practical applications. Here, we propose a new design principle to achieve low-energy ultra-flat bands with increased twist angles. The key condition is to have a 2D semiconducting material with large energy difference of band edges controlled by stacking. We show that the interlayer interaction leads to defect-like states under twisting, which forms a flat band in the semiconducting band gap with dispersion strongly suppressed by the large energy barriers in the moire superlattice even for large twist angles. We explicitly demonstrate our idea in bilayer alpha-In2Se3 and bilayer InSe. For bilayer alpha-In2Se3, we show that a twist angle -13.2 degree is sufficient to achieve the band flatness comparable to that of twist bilayer graphene at the magic angle -1.1 degree. In addition, the appearance of ultra-flat bands here is not sensitive to the twist angle as in bilayer graphene, and it can be further controlled by external gate fields. Our finding provides a new route to achieve ultra-flat bands other than reducing the twist angles and paves the way towards engineering such flat bands in a large family of 2D materials. △ Less

Submitted 28 February, 2022; originally announced February 2022.

High-performance and Low-power Transistors Based on Anisotropic Monolayer $β$-TeO$_2$

Authors: Shiying Guo, Hengze Qu, Wenhan Zhou, Shengyuan A. Yang, Yee Sin Ang, **g Lu, Haibo Zeng, Shengli Zhang

Abstract: Two-dimensional (2D) semiconductors offer a promising prospect for high-performance and energy-efficient devices especially in the sub-10 nm regime. Inspired by the successful fabrication of 2D $β$-TeO$_2$ and the high on/off ratio and high air-stability of fabricated field effect transistors (FETs) [Nat. Electron. 2021, 4, 277], we provide a comprehensive investigation of the electronic structure… ▽ More Two-dimensional (2D) semiconductors offer a promising prospect for high-performance and energy-efficient devices especially in the sub-10 nm regime. Inspired by the successful fabrication of 2D $β$-TeO$_2$ and the high on/off ratio and high air-stability of fabricated field effect transistors (FETs) [Nat. Electron. 2021, 4, 277], we provide a comprehensive investigation of the electronic structure of monolayer $β$-TeO$_2$ and the device performance of sub-10 nm metal oxide semiconductors FETs (MOSFETs) based on this material. The anisotropic electronic structure of monolayer $β$-TeO$_2$ plays a critical role in the anisotropy of transport properties for MOSFETs. We show that the 5.2-nm gate-length n-type MOSFET holds an ultra-high on-state current exceeding 3700 μA/μm according to International Roadmap for Devices and Systems (IRDS) 2020 goals for high-performance devices, which is benefited by the highly anisotropic electron effective mass. Moreover, monolayer $β$-TeO$_2$ MOSFETs can fulfill the IRDS 2020 goals for both high-performance and low-power devices in terms of on-state current, sub-threshold swing, delay time, and power-delay product. This study unveils monolayer $β$-TeO$_2$ as a promising candidate for ultra-scaled devices in future nanoelectronics. △ Less

Submitted 16 February, 2022; originally announced February 2022.

Comments: 21 pages, 6 figures

Monolayer RhB4: half-auxeticity and almost ideal spin-orbit Dirac point semimetal

Authors: Zhen Gao, Qianqian Wang, Weikang Wu, Zhixue Tian, Ying Liu, Fengxian Ma, Yalong Jiao, Shengyuan A. Yang

Abstract: Structural-property relationship, the connection between materials' structures and their properties, is central to the materials research. Especially at reduced dimensions, novel structural motifs often generate unique physical properties.Motivated by a recent work reporting a novel half auxetic effect in monolayer PdB4 with a hypercoordinated structure, here, we extensively explore similar 2D tra… ▽ More Structural-property relationship, the connection between materials' structures and their properties, is central to the materials research. Especially at reduced dimensions, novel structural motifs often generate unique physical properties.Motivated by a recent work reporting a novel half auxetic effect in monolayer PdB4 with a hypercoordinated structure, here, we extensively explore similar 2D transition metal boride structures MB4 with M covering 3d and 4d elements.Our investigation screens out one stable candidate, the monolayer RhB4. We find that monolayer RhB4 also shows half auxeticity, i.e., the material always expands in a lateral in-plane direction in response to an applied strain in the other direction, regardless of whether the strain is positive or negative.We show that this special mechanical character is intimately tied to the hypercoordinated structure with the M\c{opyright}B8 structural motif. Furthermore, regarding electronic properties, monolayer RhB4 is found to be the first example of an almost ideal 2D spin-orbit Dirac point semimetal.The low-energy band structure is clean, with a pair of fourfold degenerate Dirac points robust under spin-orbit coupling located close to the Fermi level. These Dirac points are enforced by the nonsymmorphic space group symmetry which is also determined by the lattice structure. Our work deepens the fundamental understanding of structural-property relationship in reduced dimensions. The half auxeticity and the spin-orbit Dirac points will make monolayer RhB4 a promising platform for nanomechanics and nanoelectronics applications. △ Less

Submitted 8 December, 2021; originally announced December 2021.

Comments: accepted in PRB

Systematic investigation of emergent particles in type-III magnetic space groups

Authors: Gui-Bin Liu, Zeying Zhang, Zhi-Ming Yu, Shengyuan A. Yang, Yugui Yao

Abstract: In three-dimensional (3D) crystals, emergent particles arise when two or multiple bands contact and form degeneracy (band crossing) in the Brillouin zone. Recently a complete classification of emergent particles in 3D nonmagnetic crystals, which described by the type-II magnetic space groups (MSGs), has been established. However, a systematic investigation of emergent particles in magnetic crystal… ▽ More In three-dimensional (3D) crystals, emergent particles arise when two or multiple bands contact and form degeneracy (band crossing) in the Brillouin zone. Recently a complete classification of emergent particles in 3D nonmagnetic crystals, which described by the type-II magnetic space groups (MSGs), has been established. However, a systematic investigation of emergent particles in magnetic crystals has not yet been performed, due to the complexity of the symmetries of magnetically ordered structures. Here, we address this challenging task by exploring the possibilities of the emergent particles in the 674 type-III MSGs. Based on effective k.p Hamiltonian and our classification of emergent particles [Yu et al., Sci. Bull. 67, 375 (2022) DOI:10.1016/j.scib.2021.10.023], we identify all possible emergent particles, including spinful and spinless, essential and accidental particles in the type-III MSGs. We find that all emergent particles in type-III MSGs also exist in type-II MSGs, with only one exception, i.e. the combined quadratic nodal line and nodal surface (QNL/NS). Moreover, tabulations of the emergent particles in each of the 674 type-III MSGs, together with the symmetry operations, the small corepresentations, the effective k.p Hamiltonians, and the topological character of these particles, are explicitly presented. Remarkably, combining this work and our homemade SpaceGroupIrep and MSGCorep packages will provide an effcient way to search topological magnetic materials with novel quasiparticles. △ Less

Submitted 15 February, 2022; v1 submitted 8 November, 2021; originally announced November 2021.

Comments: 8 pages, 1 figure, 3 tables

Journal ref: Phys. Rev. B 105, 085117 (2022)

Empirical LiK excited state potentials: connecting short range and near dissociation expansions

Authors: Sofia Botsi, Anbang Yang, Mark M. Lam, Sambit B. Pal, Sunil Kumar, Markus Debatin, Kai Dieckmann

Abstract: We report on a high-resolution spectroscopic survey of ${}^{6}\textrm{Li}{}^{40}\textrm{K}$ molecules near the $2\textrm{S}+4\textrm{P}$ dissociation threshold and produce a fully empirical representation for the $\textrm{B}^{1}Π$ potential by connecting available short- and long-range data. The purpose is to identify a suitable intermediate state for a coherent Raman transfer to the absolute grou… ▽ More We report on a high-resolution spectroscopic survey of ${}^{6}\textrm{Li}{}^{40}\textrm{K}$ molecules near the $2\textrm{S}+4\textrm{P}$ dissociation threshold and produce a fully empirical representation for the $\textrm{B}^{1}Π$ potential by connecting available short- and long-range data. The purpose is to identify a suitable intermediate state for a coherent Raman transfer to the absolute ground state, and the creation of a molecular gas with dipolar interactions. Starting from weakly bound ultracold Feshbach molecules, the transition frequencies to twenty-six vibrational states are determined. Our data are combined with long-range measurements [Ridinger et al., EPL, 2011, 96, 33001], and near-dissociation expansions for the spin-orbit coupled potentials are fitted to extract the $C_6$ dispersion coefficients. A suitable vibrational level is identified by resolving its Zeeman structure and by comparing the experimentally attained g-factor to our theoretical prediction. Using mass-scaling of the short-range data for the $\textrm{B}^{1}Π$ [Pashov et al., Chem. Phys. Lett., 1998, 292, 615-620] and an updated value for its depth, we model the short- and the long-range data simultaneously and produce a Rydberg-Klein-Rees curve covering the entire range. △ Less

Submitted 14 October, 2021; originally announced October 2021.

Spin decomposition and topological properties in a generic electromagnetic field

Authors: Peng Shi, Ai** Yang, Xiao** Yin, Lu** Du, Xinrui Lei, Xiaocong Yuan

Abstract: Electromagnetic spins, including longitudinal and transverse ones, have been playing important roles in light-matter interactions. Here, we formulate a unified equation to uncover the physical origins and topological properties of longitudinal and transverse spins in a generic electromagnetic field. The equation reveals universally that the transverse spin is locked with the kinetic momentum and o… ▽ More Electromagnetic spins, including longitudinal and transverse ones, have been playing important roles in light-matter interactions. Here, we formulate a unified equation to uncover the physical origins and topological properties of longitudinal and transverse spins in a generic electromagnetic field. The equation reveals universally that the transverse spin is locked with the kinetic momentum and originated from the transverse inhomogeneities of field, whereas the helix-dependent longitudinal spin orients parallel to the local wavevector. Remarkably, a hidden extraordinary helix-dependent transverse spin possessing helix-dependent spin-momentum locking is discovered and the number of locking states consistent with the nontrivial topological spin Chern number. Furthermore, this spin which determines the inverted helical components is related to the Berry curvature closely. The findings, which are demonstrated experimentally by measuring the three-dimensional spin components in the focusing configuration, will deepen the understanding the underlying physics of spins and open an avenue for chiral quantum optical applications. △ Less

Submitted 21 November, 2022; v1 submitted 2 August, 2021; originally announced August 2021.

Comments: 15 pages, 3 figures, 2 table, 7 equations, 56 references in main text; 39 pages, 16 figures, 100 equations, 16 references in supplemental materials

Projectively enriched symmetry and topology in acoustic crystals

Authors: Haoran Xue, Zihao Wang, Yue-Xin Huang, Zheyu Cheng, Letian Yu, Y. X. Foo, Y. X. Zhao, Shengyuan A. Yang, Baile Zhang

Abstract: Symmetry plays a key role in modern physics, as manifested in the revolutionary topological classification of matter in the past decade. So far, we seem to have a complete theory of topological phases from internal symmetries as well as crystallographic symmetry groups. However, an intrinsic element, i.e., the gauge symmetry in physical systems, has been overlooked in the current framework. Here,… ▽ More Symmetry plays a key role in modern physics, as manifested in the revolutionary topological classification of matter in the past decade. So far, we seem to have a complete theory of topological phases from internal symmetries as well as crystallographic symmetry groups. However, an intrinsic element, i.e., the gauge symmetry in physical systems, has been overlooked in the current framework. Here, we show that the algebraic structure of crystal symmetries can be projectively enriched due to the gauge symmetry, which subsequently gives rise to new topological physics never witnessed under ordinary symmetries. We demonstrate the idea by theoretical analysis, numerical simulation, and experimental realization of a topological acoustic lattice with projective translation symmetries under a $Z_2$ gauge field, which exhibits unique features of rich topologies, including a single Dirac point, Möbius topological insulator and graphene-like semimetal phases on a rectangular lattice. Our work reveals the impact when gauge and crystal symmetries meet together with topology, and opens the door to a vast unexplored land of topological states by projective symmetries. △ Less

Submitted 24 July, 2021; originally announced July 2021.

Comments: 7 pages, 4 figures

Radioactivity control strategy for the JUNO detector

Authors: JUNO collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli, Thilo Birkenfeld, Sylvie Blin , et al. (578 additional authors not shown)

Abstract: JUNO is a massive liquid scintillator detector with a primary scientific goal of determining the neutrino mass ordering by studying the oscillated anti-neutrino flux coming from two nuclear power plants at 53 km distance. The expected signal anti-neutrino interaction rate is only 60 counts per day, therefore a careful control of the background sources due to radioactivity is critical. In particula… ▽ More JUNO is a massive liquid scintillator detector with a primary scientific goal of determining the neutrino mass ordering by studying the oscillated anti-neutrino flux coming from two nuclear power plants at 53 km distance. The expected signal anti-neutrino interaction rate is only 60 counts per day, therefore a careful control of the background sources due to radioactivity is critical. In particular, natural radioactivity present in all materials and in the environment represents a serious issue that could impair the sensitivity of the experiment if appropriate countermeasures were not foreseen. In this paper we discuss the background reduction strategies undertaken by the JUNO collaboration to reduce at minimum the impact of natural radioactivity. We describe our efforts for an optimized experimental design, a careful material screening and accurate detector production handling, and a constant control of the expected results through a meticulous Monte Carlo simulation program. We show that all these actions should allow us to keep the background count rate safely below the target value of 10 Hz in the default fiducial volume, above an energy threshold of 0.7 MeV. △ Less

Submitted 13 October, 2021; v1 submitted 8 July, 2021; originally announced July 2021.

Comments: 35 pages, 12 figures

Observation of Weyl point pair annihilation in a gyromagnetic photonic crystal

Authors: Gui-Geng Liu, Zhen Gao, Peiheng Zhou, Qiang Wang, Yuan-Hang Hu, Maoren Wang, Chengqi Liu, Xiao Lin, Shengyuan A. Yang, Yihao Yang, Yidong Chong, Baile Zhang

Abstract: Weyl semimetals are gapless three-dimensional (3D) phases whose bandstructures contain Weyl point (WP) degeneracies. WPs carry topological charge and can only be eliminated by mutual annihilation, a process that generates the various topologically distinct 3D insulators. Time reversal (T) symmetric Weyl phases, containing a minimum of four WPs, have been extensively studied in real materials, phot… ▽ More Weyl semimetals are gapless three-dimensional (3D) phases whose bandstructures contain Weyl point (WP) degeneracies. WPs carry topological charge and can only be eliminated by mutual annihilation, a process that generates the various topologically distinct 3D insulators. Time reversal (T) symmetric Weyl phases, containing a minimum of four WPs, have been extensively studied in real materials, photonic metamaterials, and other systems. Weyl phases with a single WP pair - the simplest configuration of WPs - are more elusive as they require T-breaking. Here, we implement a microwave-scale gyromagnetic 3D photonic crystal, and use field-map** experiments to track a single pair of ideal WPs whose momentum space locations depend strongly on the biasing magnetic field. By continuously varying the field strength, we observe the annihilation of the WPs, and the formation of a 3D Chern insulator, a previously unrealised member of the family of 3D topological insulators (TIs). Surface measurements show, in unprecedented detail, how the Fermi arc states connecting the WPs evolve into TI surface states. △ Less

Submitted 3 June, 2021; originally announced June 2021.

Journal ref: Nature 609(7929), 925-930 (2022)

LES wall modeling for heat transfer at high speeds

Authors: Peng E. S. Chen, Yu Lv, Haosen H. A. Xu, Yipeng Shi, Xiang I. A. Yang

Abstract: A practical application of universal wall scalings is near-wall turbulence modeling. In this paper, we exploit temperature's semi-local scaling [Patel, Boersma, and Pecnik, {Scalar statistics in variable property turbulent channel flows}, Phys. Rev. Fluids, 2017, 2(8), 084604] and derive an eddy conductivity closure for wall-modeled large-eddy simulation of high-speed flows. We show that while the… ▽ More A practical application of universal wall scalings is near-wall turbulence modeling. In this paper, we exploit temperature's semi-local scaling [Patel, Boersma, and Pecnik, {Scalar statistics in variable property turbulent channel flows}, Phys. Rev. Fluids, 2017, 2(8), 084604] and derive an eddy conductivity closure for wall-modeled large-eddy simulation of high-speed flows. We show that while the semi-local scaling does not collapse high-speed direct numerical simulation (DNS) data, the resulting eddy conductivity and the wall model work fairly well. The paper attempts to answer the following outstanding question: why the semi-local scaling fails but the resulting eddy conductivity works well. We conduct DNSs of Couette flows at Mach numbers from $M=1.4$ to 6. We add a source term in the energy equation to get a cold, a close-to-adiabatic wall, and a hot wall. Detailed analysis of the flows' energy budgets shows that aerodynamic heating is the answer to our question: aerodynamic heating is not accounted for in Patel et al.'s semi-local scaling but is modeled in the equilibrium wall model. We incorporate aerodynamic heating in semi-local scaling and show that the new scaling successfully collapses the high-speed DNS data. We also show that incorporating aerodynamic heating or not, the semi-local scaling gives rise to the exact same eddy conductivity, thereby answering the outstanding question. △ Less

Submitted 25 May, 2021; originally announced May 2021.

Comments: 24 pages, 13 figures

The Design and Sensitivity of JUNO's scintillator radiopurity pre-detector OSIRIS

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Guangpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli, Thilo Birkenfeld , et al. (582 additional authors not shown)

Abstract: The OSIRIS detector is a subsystem of the liquid scintillator fillling chain of the JUNO reactor neutrino experiment. Its purpose is to validate the radiopurity of the scintillator to assure that all components of the JUNO scintillator system work to specifications and only neutrino-grade scintillator is filled into the JUNO Central Detector. The aspired sensitivity level of $10^{-16}$ g/g of… ▽ More The OSIRIS detector is a subsystem of the liquid scintillator fillling chain of the JUNO reactor neutrino experiment. Its purpose is to validate the radiopurity of the scintillator to assure that all components of the JUNO scintillator system work to specifications and only neutrino-grade scintillator is filled into the JUNO Central Detector. The aspired sensitivity level of $10^{-16}$ g/g of $^{238}$U and $^{232}$Th requires a large ($\sim$20 m$^3$) detection volume and ultralow background levels. The present paper reports on the design and major components of the OSIRIS detector, the detector simulation as well as the measuring strategies foreseen and the sensitivity levels to U/Th that can be reached in this setup. △ Less

Submitted 31 March, 2021; originally announced March 2021.

Comments: 32 pages, 22 figures

Photonic spin lattices: symmetry constraints for skyrmion and meron topologies

Authors: Xinrui Lei, Ai** Yang, Peng Shi, Zhenwei Xie, Lu** Du, Anatoly V. Zayats, Xiaocong Yuan

Abstract: Symmetry governs many electronic and photonic phenomena in optics and condensed matter physics. Skyrmions and merons are prominent topological structures in magnetic materials, with the topological features determined by the interplay between anisotropy of a material and its magnetization. Here we theoretically show and experimentally demonstrate that the symmetry of the electromagnetic field dete… ▽ More Symmetry governs many electronic and photonic phenomena in optics and condensed matter physics. Skyrmions and merons are prominent topological structures in magnetic materials, with the topological features determined by the interplay between anisotropy of a material and its magnetization. Here we theoretically show and experimentally demonstrate that the symmetry of the electromagnetic field determines the spin topological properties of the guided modes via spin-orbit coupling and may only result in either hexagonal spin-skyrmion or square spin-meron lattices. We also show that in the absence of spin-orbit coupling these spin topologies are degenerated in dynamic field-skyrmions, unifying description of electromagnetic field topologies. The results provide new understanding of electromagnetic field topology and its transformations as well as new opportunities for applications in quantum optics, spin-optics and topological photonics. △ Less

Submitted 29 March, 2021; originally announced March 2021.

Gain and charge response of 20 inch MCP and dynode PMTs

Authors: H. Q. Zhang, Z. M. Wang, F. J. Luo, A. B. Yang, D. R. Wu, Y. C. Li, Z. H. Qin, C. G. Yang, Y. K. Heng, Y. F. Wang, H. S. Chen

Abstract: JUNO is a 20-kton liquid scintillator detector aiming to determine the neutrino mass ordering, precisely measure the oscillation parameters, detect the astrophysical neutrinos and search for exotic physics. It is designed to reach an energy resolution of 3% at 1 MeV with the highest ever PMT coverage, using two types of 20 inch phototubes: MCP-PMT from NNVT and dynode-PMT from Hamamatsu. In this a… ▽ More JUNO is a 20-kton liquid scintillator detector aiming to determine the neutrino mass ordering, precisely measure the oscillation parameters, detect the astrophysical neutrinos and search for exotic physics. It is designed to reach an energy resolution of 3% at 1 MeV with the highest ever PMT coverage, using two types of 20 inch phototubes: MCP-PMT from NNVT and dynode-PMT from Hamamatsu. In this article, the gain and charge response of the MCP and dynode PMTs are investigated with the study of JUNO Central Detector prototype. The linearity of the MCP-PMT charge output is measured too to check the effect of a long tail on its charge spectrum. △ Less

Submitted 27 March, 2021; originally announced March 2021.

Reynolds stresses in Holmboe instabilities: from linear growth to saturation

Authors: Adam J. K. Yang, E. W. Tedford, J. Olsthoorn, A. Lefauve, G. A. Lawrence

Abstract: The Reynolds stress in Holmboe instabilities at moderate Reynolds numbers is investigated using single wavelength simulations (SWS), multiple wavelength simulations (MWS), and laboratory experiments. The rightward and leftward propagating instabilities are separated with the two-dimensional discrete Fourier transform, enabling a direct comparison of the perturbation fields between the numerical si… ▽ More The Reynolds stress in Holmboe instabilities at moderate Reynolds numbers is investigated using single wavelength simulations (SWS), multiple wavelength simulations (MWS), and laboratory experiments. The rightward and leftward propagating instabilities are separated with the two-dimensional discrete Fourier transform, enabling a direct comparison of the perturbation fields between the numerical simulations and linear stability analysis. The decomposition and superposition of the perturbation fields provide a new insight into the origin of Reynolds stresses. Conventionally, only the statistics of horizontal and vertical velocity perturbation pairs, ($u',w'$), are presented to show the degree of anisotropy in turbulent fields. Here, we present these ($u',w'$)-pairs using both theory-based and statistical approaches to reveal the mechanism of the anisotropy of perturbation field. For an individual Holmboe mode, both the simulations and linear theory show that ($u',w'$)-pairs tilt towards the 2nd and 4th quadrants ($u'w'<0$) within upper and lower vorticity interfaces, indicating an anisotropic perturbation field. As a result, a negative correlation between the horizontal and vertical velocity perturbation is produced, $i.e.$ negative Reynolds stresses on average. Combining the leftward and rightward Holmboe modes, ($u',w'$)-pairs are also ellipses whose orientation and aspect ratio are phase dependent. The joint probability density functions of ($u',w'$) in the linear theory and SWS show `steering wheel' structures, while in MWS and laboratory experiments the presence of waves of varying wavelength smears out the `steering wheel' structure leaving an elliptical cloud with similar orientation to the corresponding linear prediction. The vertical structure of the Reynolds stresses in the simulations and the laboratory experiment agree with the linear stability predictions. △ Less

Submitted 22 March, 2021; originally announced March 2021.

Designing Efficient Metal Contacts to Two-Dimensional Semiconductors MoSi$_2$N$_4$ and WSi$_2$N$_4$ Monolayers

Authors: Qianqian Wang, Liemao Cao, Shi-Jun Liang, Weikang Wu, Guangzhao Wang, Ching Hua Lee, Wee Liat Ong, Hui Ying Yang, Lay Kee Ang, Shengyuan A. Yang, Yee Sin Ang

Abstract: Metal contacts to two-dimensional (2D) semiconductors are ubiquitous in modern electronic and optoelectronic devices. Such contacts are, however, often plagued by strong Fermi level pinning (FLP) effect which reduces the tunability of the Schottky barrier height (SBH) and degrades the performance of 2D-semiconductor-based devices. In this work, we show that monolayer MoSi$_2$N$_4$ and WSi$_2$N… ▽ More Metal contacts to two-dimensional (2D) semiconductors are ubiquitous in modern electronic and optoelectronic devices. Such contacts are, however, often plagued by strong Fermi level pinning (FLP) effect which reduces the tunability of the Schottky barrier height (SBH) and degrades the performance of 2D-semiconductor-based devices. In this work, we show that monolayer MoSi$_2$N$_4$ and WSi$_2$N$_4$ - a recently synthesized 2D material class with exceptional mechanical and electronic properties - exhibit strongly suppressed FLP and wide-range tunable SBH when contacted by metals. An exceptionally large SBH slope parameter of S=0.7 is obtained, which outperform the vast majority of other 2D semiconductors. Such surprising behavior arises from the unique morphology of MoSi$_2$N$_4$ and WSi$_2$N$_4$. The outlying Si-N layer forms a native atomic layer that protects the semiconducting inner-core from the perturbance of metal contacts, thus suppressing the FLP. Our findings reveal the potential of MoSi$_2$N$_4$ and WSi$_2$N$_4$ monolayers as a novel 2D material platform for designing high-performance and energy-efficient 2D nanodevices. △ Less

Submitted 23 December, 2020; v1 submitted 14 December, 2020; originally announced December 2020.

Comments: 28 pages, 5 figures

Magic Wavelengths of the Yb $6s^2{}\,^1S_0-6s6p\,{}^3P_1$ Intercombination Transition

Authors: T. A. Zheng, Y. A. Yang, M. S. Safronova, U. I. Safronova, Zhuan-Xian Xiong, T. Xia, Z. -T. Lu

Abstract: We calculate and measure the magic wavelengths for the $6s^2{}\,^1S_0-6s6p\,{}^3P_1$ intercombination transition of the neutral ytterbium atom. The calculation is performed with the \textit{ab initio} configuration interaction (CI) + all-order method. The measurement is done with laser spectroscopy on cold atoms in an optical dipole trap. The magic wavelengths are determined to be 1035.68(4) nm fo… ▽ More We calculate and measure the magic wavelengths for the $6s^2{}\,^1S_0-6s6p\,{}^3P_1$ intercombination transition of the neutral ytterbium atom. The calculation is performed with the \textit{ab initio} configuration interaction (CI) + all-order method. The measurement is done with laser spectroscopy on cold atoms in an optical dipole trap. The magic wavelengths are determined to be 1035.68(4) nm for the $π$ transition ($Δm = 0$) and 1036.12(3) nm for the $σ$ transitions ($|Δm| = 1$) in agreement with the calculated values. Laser cooling on the narrow intercombination transition could achieve better results for atoms in an optical dipole trap when the trap wavelength is tuned to near the magic wavelength. △ Less

Submitted 12 November, 2020; originally announced November 2020.

Calibration Strategy of the JUNO Experiment

Authors: JUNO collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Guangpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Eric Baussan, Marco Bellato, Antonio Bergnoli, Enrico Bernieri, Thilo Birkenfeld , et al. (571 additional authors not shown)

Abstract: We present the calibration strategy for the 20 kton liquid scintillator central detector of the Jiangmen Underground Neutrino Observatory (JUNO). By utilizing a comprehensive multiple-source and multiple-positional calibration program, in combination with a novel dual calorimetry technique exploiting two independent photosensors and readout systems, we demonstrate that the JUNO central detector ca… ▽ More We present the calibration strategy for the 20 kton liquid scintillator central detector of the Jiangmen Underground Neutrino Observatory (JUNO). By utilizing a comprehensive multiple-source and multiple-positional calibration program, in combination with a novel dual calorimetry technique exploiting two independent photosensors and readout systems, we demonstrate that the JUNO central detector can achieve a better than 1% energy linearity and a 3% effective energy resolution, required by the neutrino mass ordering determination. △ Less

Submitted 20 January, 2021; v1 submitted 12 November, 2020; originally announced November 2020.

Grid-point and time-step requirements for direct numerical simulation and large-eddy simulation

Authors: Xiang I. A. Yang, Kevin Patrick Griffin

Abstract: We revisit the grid-point requirement estimates in Choi and Moin [Phys. Fluid, 24, 011702 (2012)] and establish more general grid-point requirements for direct numerical simulations (DNS) and large-eddy simulations (LES) of a spatially develo** turbulent boundary layer. We show that, by allowing the local grid spacing to scale with the local Kolmogorov length scale, the grid-point requirement fo… ▽ More We revisit the grid-point requirement estimates in Choi and Moin [Phys. Fluid, 24, 011702 (2012)] and establish more general grid-point requirements for direct numerical simulations (DNS) and large-eddy simulations (LES) of a spatially develo** turbulent boundary layer. We show that, by allowing the local grid spacing to scale with the local Kolmogorov length scale, the grid-point requirement for DNS of a spatially develo** turbulent boundary layer is $N\sim Re_{L_x}^{2.05}$ rather than $N\sim Re_{L_x}^{2.64}$ as suggested by Choi and Moin, where $N$ is the number of grid points and $L_x$ is the length of the plate. In addition to the grid-point requirement, we estimate the time-step requirement for DNS and LES. We show that, for a code that treats the convective term explicitly, the time steps required to get converged statistics are $N_t\sim Re_{L_x}/Re_{x_0}^{6/7}$ for wall-modeled LES and $N_t\sim Re_{L_x}/Re_{x_0}^{1/7}$ for wall-resolved LES and DNS (with different prefactors), where $Re_{x_0}$ is the inlet Reynolds number. The grid-point and time-step requirement estimates allow us to estimate the overall cost of DNS and LES. According to present estimates, the costs of DNS, wall-resolved LES and wall-modeled LES scale as $Re_{L_x}^{2.91}$, $Re_{L_x}^{2.72}$, and $Re_{L_x}^{1.14}$. △ Less

Submitted 11 January, 2021; v1 submitted 28 October, 2020; originally announced October 2020.

Comments: 11 pages, 4 figures

Journal ref: Physics of Fluids 33.1 (2021): 015108

Progress in epitaxial thin-film Na3Bi as a topological electronic material

Authors: I. Di Bernardo, J. Hellerstedt, C. Liu, G. Akhgar, W. Wu, S. A. Yang, D. Culcer, S. -K. Mo, S. Adam, M. T. Edmonds, M. S. Fuhrer

Abstract: Na3Bi was the first experimentally verified topological Dirac semimetal (TDS), and is a 3D analogue of graphene hosting relativistic Dirac fermions. Its unconventional momentum-energy relationship is interesting from a fundamental perspective, yielding exciting physical properties such as chiral charge carriers, the chiral anomaly, and weak anti-localization. It also shows promise for realising to… ▽ More Na3Bi was the first experimentally verified topological Dirac semimetal (TDS), and is a 3D analogue of graphene hosting relativistic Dirac fermions. Its unconventional momentum-energy relationship is interesting from a fundamental perspective, yielding exciting physical properties such as chiral charge carriers, the chiral anomaly, and weak anti-localization. It also shows promise for realising topological electronic devices such as topological transistors. In this review, an overview of the substantial progress achieved in the last few years on Na3Bi is presented, with a focus on technologically relevant large-area thin films synthesised via molecular beam epitaxy. Key theoretical aspects underpinning the unique electronic properties of Na3Bi are introduced. Next, the growth process on different substrates is reviewed. Spectroscopic and microscopic features are illustrated, and an analysis of semi-classical and quantum transport phenomena in different do** regimes is provided. The emergent properties arising from confinement in two dimensions, including thickness-dependent and electric-field driven topological phase transitions, are addressed, with an outlook towards current challenges and expected future progress. △ Less

Submitted 1 September, 2020; originally announced September 2020.

On skin friction in wall-bounded turbulence

Authors: Zhenhua Xia, Peng Zhang, Xiang I. A. Yang

Abstract: In this paper, we derive mathematical formulas for the skin friction coefficient in wall-bounded turbulence based on the Reynolds averaged streamwise momentum equation and the total stress. Specially, with the theoretical or empirical relation of the total stress, the skin friction coefficient is expressed in terms of the mean velocity and the Reynolds shear stress in an arbitrary wall-normal regi… ▽ More In this paper, we derive mathematical formulas for the skin friction coefficient in wall-bounded turbulence based on the Reynolds averaged streamwise momentum equation and the total stress. Specially, with the theoretical or empirical relation of the total stress, the skin friction coefficient is expressed in terms of the mean velocity and the Reynolds shear stress in an arbitrary wall-normal region $[h_0, h_1]$. The formulas are validated using the direct numerical simulation data of turbulent channel and boundary layer flows, and the results show that our formulas estimate the skin friction coefficient very accurately with an error less than $2\%$. We believe that the present integral formula can be used to determine the skin friction in turbulent channel and boundary layer flows at high Reynolds numbers where the near wall statistics are very difficult to measure accurately. △ Less

Submitted 29 July, 2020; originally announced July 2020.

Comments: 16 pages, 7 figures

MSC Class: 76FXX

Ideal Unconventional Weyl Point in a Chiral Photonic Metamaterial

Authors: Yihao Yang, Zhen Gao, Xiaolong Feng, Yue-Xin Huang, Peiheng Zhou, Shengyuan A. Yang, Yidong Chong, Baile Zhang

Abstract: Unconventional Weyl points (WPs), carrying topological charge 2 or higher, possess interesting properties different from ordinary charge-1 WPs, including multiple Fermi arcs that stretch over a large portion of the Brillouin zone. Thus far, such WPs have been observed in chiral materials and acoustic metamaterials, but there has been no clean demonstration in photonics in which the unconventional… ▽ More Unconventional Weyl points (WPs), carrying topological charge 2 or higher, possess interesting properties different from ordinary charge-1 WPs, including multiple Fermi arcs that stretch over a large portion of the Brillouin zone. Thus far, such WPs have been observed in chiral materials and acoustic metamaterials, but there has been no clean demonstration in photonics in which the unconventional photonic WPs are separated from trivial bands. We experimentally realize an ideal symmetry-protected photonic charge-2 WP in a three-dimensional topological chiral microwave metamaterial. We use field map** to directly observe the projected bulk dispersion, as well as the two long surface arcs that form a noncontractible loop wrap** around the surface Brillouin zone. The surface states span a record-wide frequency window of around 22.7% relative bandwidth. We demonstrate that the surface states exhibit a novel topological self-collimation property and are robust against disorder. This work provides an ideal photonic platform for exploring fundamental physics and applications of unconventional WPs. △ Less

Submitted 2 July, 2020; originally announced July 2020.

Comments: 6 pages, 4 figures

Journal ref: Phys. Rev. Lett. 125, 143001 (2020)

Optimization of the JUNO liquid scintillator composition using a Daya Bay antineutrino detector

Authors: Daya Bay, JUNO collaborations, :, A. Abusleme, T. Adam, S. Ahmad, S. Aiello, M. Akram, N. Ali, F. P. An, G. P. An, Q. An, G. Andronico, N. Anfimov, V. Antonelli, T. Antoshkina, B. Asavapibhop, J. P. A. M. de André, A. Babic, A. B. Balantekin, W. Baldini, M. Baldoncini, H. R. Band, A. Barresi, E. Baussan , et al. (642 additional authors not shown)

Abstract: To maximize the light yield of the liquid scintillator (LS) for the Jiangmen Underground Neutrino Observatory (JUNO), a 20 t LS sample was produced in a pilot plant at Daya Bay. The optical properties of the new LS in various compositions were studied by replacing the gadolinium-loaded LS in one antineutrino detector. The concentrations of the fluor, PPO, and the wavelength shifter, bis-MSB, were… ▽ More To maximize the light yield of the liquid scintillator (LS) for the Jiangmen Underground Neutrino Observatory (JUNO), a 20 t LS sample was produced in a pilot plant at Daya Bay. The optical properties of the new LS in various compositions were studied by replacing the gadolinium-loaded LS in one antineutrino detector. The concentrations of the fluor, PPO, and the wavelength shifter, bis-MSB, were increased in 12 steps from 0.5 g/L and <0.01 mg/L to 4 g/L and 13 mg/L, respectively. The numbers of total detected photoelectrons suggest that, with the optically purified solvent, the bis-MSB concentration does not need to be more than 4 mg/L. To bridge the one order of magnitude in the detector size difference between Daya Bay and JUNO, the Daya Bay data were used to tune the parameters of a newly developed optical model. Then, the model and tuned parameters were used in the JUNO simulation. This enabled to determine the optimal composition for the JUNO LS: purified solvent LAB with 2.5 g/L PPO, and 1 to 4 mg/L bis-MSB. △ Less

Submitted 1 July, 2020; originally announced July 2020.

Comments: 13 pages, 8 figures