-
A hidden advantage of van der Waals materials for overcoming limitations in photonic integrated circuitry
Authors:
Andrey A. Vyshnevyy,
Georgy A. Ermolaev,
Dmitriy V. Grudinin,
Kirill V. Voronin,
Ivan Kharichkin,
Arslan Mazitov,
Ivan A. Kruglov,
Dmitry I. Yakubovsky,
Prabhash Mishra,
Roman V. Kirtaev,
Aleksey V. Arsenin,
Kostya S. Novoselov,
Luis Martin-Moreno,
Valentyn S. Volkov
Abstract:
With the advance of on-chip nanophotonics, there is a high demand for high refractive index, low-loss materials. Currently, this technology is dominated by silicon, but van der Waals (vdW) materials with high refractive index can offer a very advanced alternative. Still, up to now it was not clear if the optical anisotropy perpendicular to the layers might be a hindering factor for the development…
▽ More
With the advance of on-chip nanophotonics, there is a high demand for high refractive index, low-loss materials. Currently, this technology is dominated by silicon, but van der Waals (vdW) materials with high refractive index can offer a very advanced alternative. Still, up to now it was not clear if the optical anisotropy perpendicular to the layers might be a hindering factor for the development of vdW nanophotonics. Here, we studied WS2-based waveguides in terms of their optical properties and, particularly, in terms of possible crosstalk distance. Surprisingly, we discovered that the low refractive index in the direction perpendicular to the atomic layers improves the characteristics of such devices, mainly due to expanding the range of parameters at which single-mode propagation can be achieved. Thus, using anisotropic materials offers new opportunities and novel control knobs when designing the nanophotonic devices.
△ Less
Submitted 31 March, 2023;
originally announced April 2023.
-
Giant optical anisotropy in transition metal dichalcogenides for next-generation photonics
Authors:
G. A. Ermolaev,
D. V. Grudinin,
Y. V. Stebunov,
K. V. Voronin,
V. G. Kravets,
J. Duan,
A. B. Mazitov,
G. I. Tselikov,
A. Bylinkin,
D. I. Yakubovsky,
S. M. Novikov,
D. G. Baranov,
A. Y. Nikitin,
I. A. Kruglov,
T. Shegai,
P. Alonso-González,
A. N. Grigorenko,
A. V. Arsenin,
K. S. Novoselov,
V. S. Volkov
Abstract:
Large optical anisotropy observed in a broad spectral range is of paramount importance for efficient light manipulation in countless devices. Although a giant anisotropy was recently observed in the mid-infrared wavelength range, for visible and near-infrared spectral intervals, the problem remains acute with the highest reported birefringence values of 0.8 in BaTiS3 and h-BN crystals. This inspir…
▽ More
Large optical anisotropy observed in a broad spectral range is of paramount importance for efficient light manipulation in countless devices. Although a giant anisotropy was recently observed in the mid-infrared wavelength range, for visible and near-infrared spectral intervals, the problem remains acute with the highest reported birefringence values of 0.8 in BaTiS3 and h-BN crystals. This inspired an intensive search for giant optical anisotropy among natural and artificial materials. Here, we demonstrate that layered transition metal dichalcogenides (TMDCs) provide an answer to this quest owing to their fundamental differences between intralayer strong covalent bonding and weak interlayer van der Walls interaction. To do this, we carried out a correlative far- and near-field characterization validated by first-principle calculations that reveals an unprecedented birefringence of 1.5 in the infrared and 3 in the visible light for MoS2. Our findings demonstrate that this outstanding anisotropy allows for tackling the diffraction limit enabling an avenue for on-chip next-generation photonics.
△ Less
Submitted 11 January, 2021; v1 submitted 1 June, 2020;
originally announced June 2020.
-
Experimental verification of a plasmonic hook in a dielectric Janus particle
Authors:
Igor V. Minin,
Oleg V. Minin,
Igor A. Glinskiy,
Rustam A. Khabibullin,
Radu Malureanu,
Dmitry I. Yakubovsky,
Valentyn S. Volkov,
Dmitry S. Ponomarev
Abstract:
We report on a very first experimental observation of a new curved plasmonic beam, a plasmonic hook (PH), for surface plasmon-polariton (SPP) waves. We demonstrate that the SPP PH effect could be realized within a trapezoidal dielectric microstructure with the relative ease of fabrication compared to the generation of the Airy SPP waves which require complex techniques to compensate the wave vecto…
▽ More
We report on a very first experimental observation of a new curved plasmonic beam, a plasmonic hook (PH), for surface plasmon-polariton (SPP) waves. We demonstrate that the SPP PH effect could be realized within a trapezoidal dielectric microstructure with the relative ease of fabrication compared to the generation of the Airy SPP waves which require complex techniques to compensate the wave vectors mismatch. Using numerical analysis, we predicted the PH phenomenon, optimized the microstructure and then confirmed the SPP PH existence via amplitude and phase-resolved scattering scanning near-field optical microscopy at the telecom wavelengths of 1530-1570 nm. The experimental results are in reasonable agreement with our predictions. Importantly, the SPP PH demonstrates the smallest radius of curvature ever recorded for SPP waves compared to that for the Airy-family plasmonic beams providing many useful applications spreading from nanoparticles manipulation toward bio-sensing within a nanoscale.
△ Less
Submitted 28 May, 2020; v1 submitted 22 April, 2020;
originally announced April 2020.
-
First experimental observation of plasmonic photonic jet based on dielectric cube
Authors:
Igor V. Minin,
Oleg V. Minin,
Dmitry S. Ponomarev,
Igor A. Glinskiy,
Dmitry I. Yakubovsky,
Valentin. S. Volkov
Abstract:
We report on the first experimental demonstration that the microstructure based on a dielectric cuboid combined to a thin metal film can act as an efficient plasmonic lens allowing focusing surface plasmons in a subwavelength scale. By means of numerical simulation of surface plasmon-polariton (SPP) field intensity distributions in the microstructure, we observe a low divergence of plasmonic photo…
▽ More
We report on the first experimental demonstration that the microstructure based on a dielectric cuboid combined to a thin metal film can act as an efficient plasmonic lens allowing focusing surface plasmons in a subwavelength scale. By means of numerical simulation of surface plasmon-polariton (SPP) field intensity distributions in the microstructure, we observe a low divergence of plasmonic photonic jet (PPJ) and high intensity subwavelength spots at the communication wavelength of 1530 nm. Then we fabricate an experimental sample of the microstructure and study the SSP field intensity distributions using the amplitude and phase-resolved scanning near-field optical microscopy and demonstrate the experimental observation of the PPJ effect for the SSP waves. Such novel and simple platform can provide new pathways for plasmonics, high-resolution imaging, biophotonics as well as optical data storage.
△ Less
Submitted 25 December, 2019;
originally announced December 2019.
-
Ultrathin and ultrasmooth gold films on monolayer MoS2
Authors:
Dmitry I. Yakubovsky,
Yury V. Stebunov,
Roman V. Kirtaev,
Georgy A. Ermolaev,
Mikhail S. Mironov,
Sergey M. Novikov,
Aleksey V. Arsenin,
Valentyn S. Volkov
Abstract:
Sub-10 nm continuous metal films are promising candidates for flexible and transparent nanophotonics and optoelectronics applications. In this Letter, we demonstrate that monolayer MoS2 is a perspective adhesion layer for the deposition of continuous conductive gold films with a thickness of only 3-4 nm. Optical properties of continuous ultrathin gold films deposited on two-dimensional MoS2 grown…
▽ More
Sub-10 nm continuous metal films are promising candidates for flexible and transparent nanophotonics and optoelectronics applications. In this Letter, we demonstrate that monolayer MoS2 is a perspective adhesion layer for the deposition of continuous conductive gold films with a thickness of only 3-4 nm. Optical properties of continuous ultrathin gold films deposited on two-dimensional MoS2 grown by chemical vapor deposition are investigated by spectroscopic ellipsometry over a wide wavelength range (300-3300 nm). Results show that optical losses in ultrathin films increase with decreasing thickness due to the fine-grained structure and the presence of a small number of voids, however, they exhibit metallic properties down to a thickness of 3-4 nm. The atomic-scale MoS2 interfaces can be transferred to any substrate and thus open up new opportunities for the creation of metasurfaces and a new type of van der Waals heterostructures with atomically thin metal layers.
△ Less
Submitted 29 December, 2018;
originally announced December 2018.