-
The Belle II Detector Upgrades Framework Conceptual Design Report
Authors:
H. Aihara,
A. Aloisio,
D. P. Auguste,
M. Aversano,
M. Babeluk,
S. Bahinipati,
Sw. Banerjee,
M. Barbero,
J. Baudot,
A. Beaubien,
F. Becherer,
T. Bergauer,
F. U. Bernlochner.,
V. Bertacchi,
G. Bertolone,
C. Bespin,
M. Bessner,
S. Bettarini,
A. J. Bevan,
B. Bhuyan,
M. Bona,
J. F. Bonis,
J. Borah,
F. Bosi,
R. Boudagga
, et al. (186 additional authors not shown)
Abstract:
We describe the planned near-term and potential longer-term upgrades of the Belle II detector at the SuperKEKB electron-positron collider operating at the KEK laboratory in Tsukuba, Japan. These upgrades will allow increasingly sensitive searches for possible new physics beyond the Standard Model in flavor, tau, electroweak and dark sector physics that are both complementary to and competitive wit…
▽ More
We describe the planned near-term and potential longer-term upgrades of the Belle II detector at the SuperKEKB electron-positron collider operating at the KEK laboratory in Tsukuba, Japan. These upgrades will allow increasingly sensitive searches for possible new physics beyond the Standard Model in flavor, tau, electroweak and dark sector physics that are both complementary to and competitive with the LHC and other experiments.
△ Less
Submitted 4 July, 2024; v1 submitted 26 June, 2024;
originally announced June 2024.
-
XENONnT WIMP Search: Signal & Background Modeling and Statistical Inference
Authors:
XENON Collaboration,
E. Aprile,
J. Aalbers,
K. Abe,
S. Ahmed Maouloud,
L. Althueser,
B. Andrieu,
E. Angelino,
D. Antón Martin,
F. Arneodo,
L. Baudis,
M. Bazyk,
L. Bellagamba,
R. Biondi,
A. Bismark,
K. Boese,
A. Brown,
G. Bruno,
R. Budnik,
J. M. R. Cardoso,
A. P. Cimental Chávez,
A. P. Colijn,
J. Conrad,
J. J. Cuenca-García,
V. D'Andrea
, et al. (139 additional authors not shown)
Abstract:
The XENONnT experiment searches for weakly-interacting massive particle (WIMP) dark matter scattering off a xenon nucleus. In particular, XENONnT uses a dual-phase time projection chamber with a 5.9-tonne liquid xenon target, detecting both scintillation and ionization signals to reconstruct the energy, position, and type of recoil. A blind search for nuclear recoil WIMPs with an exposure of 1.1 t…
▽ More
The XENONnT experiment searches for weakly-interacting massive particle (WIMP) dark matter scattering off a xenon nucleus. In particular, XENONnT uses a dual-phase time projection chamber with a 5.9-tonne liquid xenon target, detecting both scintillation and ionization signals to reconstruct the energy, position, and type of recoil. A blind search for nuclear recoil WIMPs with an exposure of 1.1 tonne-years yielded no signal excess over background expectations, from which competitive exclusion limits were derived on WIMP-nucleon elastic scatter cross sections, for WIMP masses ranging from 6 GeV/$c^2$ up to the TeV/$c^2$ scale. This work details the modeling and statistical methods employed in this search. By means of calibration data, we model the detector response, which is then used to derive background and signal models. The construction and validation of these models is discussed, alongside additional purely data-driven backgrounds. We also describe the statistical inference framework, including the definition of the likelihood function and the construction of confidence intervals.
△ Less
Submitted 19 June, 2024;
originally announced June 2024.
-
Exploring Automated Contouring Across Institutional Boundaries: A Deep Learning Approach with Mouse Micro-CT Datasets
Authors:
Lu Jiang,
Di Xu,
Qifan Xu,
Arion Chatziioannou,
Keisuke S. Iwamoto,
Susanta Hui,
Ke Sheng
Abstract:
Image-guided mouse irradiation is essential to understand interventions involving radiation prior to human studies. Our objective is to employ Swin UNEt Transformers (Swin UNETR) to segment native micro-CT and contrast-enhanced micro-CT scans and benchmark the results against 3D no-new-Net (nnU-Net). Swin UNETR reformulates mouse organ segmentation as a sequence-to-sequence prediction task, using…
▽ More
Image-guided mouse irradiation is essential to understand interventions involving radiation prior to human studies. Our objective is to employ Swin UNEt Transformers (Swin UNETR) to segment native micro-CT and contrast-enhanced micro-CT scans and benchmark the results against 3D no-new-Net (nnU-Net). Swin UNETR reformulates mouse organ segmentation as a sequence-to-sequence prediction task, using a hierarchical Swin Transformer encoder to extract features at 5 resolution levels, and connects to a Fully Convolutional Neural Network (FCNN)-based decoder via skip connections. The models were trained and evaluated on open datasets, with data separation based on individual mice. Further evaluation on an external mouse dataset acquired on a different micro-CT with lower kVp and higher imaging noise was also employed to assess model robustness and generalizability. Results indicate that Swin UNETR consistently outperforms nnU-Net and AIMOS in terms of average dice similarity coefficient (DSC) and Hausdorff distance (HD95p), except in two mice of intestine contouring. This superior performance is especially evident in the external dataset, confirming the model's robustness to variations in imaging conditions, including noise and quality, thereby positioning Swin UNETR as a highly generalizable and efficient tool for automated contouring in pre-clinical workflows.
△ Less
Submitted 28 May, 2024;
originally announced May 2024.
-
Data quality control system and long-term performance monitor of the LHAASO-KM2A
Authors:
Zhen Cao,
F. Aharonian,
Axikegu,
Y. X. Bai,
Y. W. Bao,
D. Bastieri,
X. J. Bi,
Y. J. Bi,
W. Bian,
A. V. Bukevich,
Q. Cao,
W. Y. Cao,
Zhe Cao,
J. Chang,
J. F. Chang,
A. M. Chen,
E. S. Chen,
H. X. Chen,
Liang Chen,
Lin Chen,
Long Chen,
M. J. Chen,
M. L. Chen,
Q. H. Chen,
S. Chen
, et al. (263 additional authors not shown)
Abstract:
The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To…
▽ More
The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively.
△ Less
Submitted 13 June, 2024; v1 submitted 20 May, 2024;
originally announced May 2024.
-
Advancing Electron Injection Dynamics and Mitigation Approaches in the Electron-Ion Collider Swap-out Injection Scheme
Authors:
Derong Xu,
Ferdinand Willeke,
Michael M. Blaskiewicz,
Yun Luo,
Christoph Montag
Abstract:
The Electron-Ion Collider (EIC) will use swap-out injection scheme for the Electron Storage Ring (ESR) to overcome limitations in polarization lifetime. However, the pursuit of highest luminosity with the required 28 nC electron bunches encounters stability challenges in the Rapid Cycling Synchrotron (RCS). One method is to inject multiple RCS bunches into a same ESR bucket. In this paper we perfo…
▽ More
The Electron-Ion Collider (EIC) will use swap-out injection scheme for the Electron Storage Ring (ESR) to overcome limitations in polarization lifetime. However, the pursuit of highest luminosity with the required 28 nC electron bunches encounters stability challenges in the Rapid Cycling Synchrotron (RCS). One method is to inject multiple RCS bunches into a same ESR bucket. In this paper we perform simulation studies investigating proton emittance growth and electron emittance blowup in this injection scheme. Mitigation strategies are explored. These findings promise enhanced EIC stability and performance, sha** potential future operational improvements.
△ Less
Submitted 14 May, 2024;
originally announced May 2024.
-
Assessing global crabbing scheme feasibility for Electron-Ion Collider
Authors:
Derong Xu,
Yun Luo,
Daniel Marx,
Christoph Montag
Abstract:
The Electron-Ion Collider (EIC) plans to utilize the local crabbing crossing scheme. This paper explores the feasibility of adopting a single crab cavity with adjusted voltage, inspired by the successful global crabbing scheme in KEKB, to restore effective head-on collisions. Using weak-strong simulations, the study assesses the potential of this global crabbing scheme for the EIC while emphasizin…
▽ More
The Electron-Ion Collider (EIC) plans to utilize the local crabbing crossing scheme. This paper explores the feasibility of adopting a single crab cavity with adjusted voltage, inspired by the successful global crabbing scheme in KEKB, to restore effective head-on collisions. Using weak-strong simulations, the study assesses the potential of this global crabbing scheme for the EIC while emphasizing the need for adiabatic cavity ram** to prevent luminosity loss. Additionally, the research outlines potential risks associated with beam dynamics in implementing this scheme.
△ Less
Submitted 14 May, 2024;
originally announced May 2024.
-
Data Format Standardization and DICOM Integration for Hyperpolarized 13C MRI
Authors:
Ernesto Diaz,
Renuka Sriram,
Jeremy W. Gordon,
Avantika Sinha,
Xiaoxi Liu,
Sule Sahin,
Jason Crane,
Marram P Olson,
Hsin-Yu Chen,
Jenna Bernard,
Daniel B. Vigneron,
Zhen Jane Wang,
Duan Xu,
Peder E. Z. Larson
Abstract:
Hyperpolarized (HP) 13C MRI has shown promise as a valuable modality for in vivo measurements of metabolism and is currently in human trials at 15 research sites worldwide. With this growth it is important to adopt standardized data storage practices as it will allow sites to meaningfully compare data.
In this paper we (1) describe data that we believe should be stored and (2) demonstrate pipeli…
▽ More
Hyperpolarized (HP) 13C MRI has shown promise as a valuable modality for in vivo measurements of metabolism and is currently in human trials at 15 research sites worldwide. With this growth it is important to adopt standardized data storage practices as it will allow sites to meaningfully compare data.
In this paper we (1) describe data that we believe should be stored and (2) demonstrate pipelines and methods that utilize the Digital Imaging and Communications in Medicine (DICOM) standard. This includes proposing a set of minimum set of information that is specific to HP 13C MRI studies. We then show where the majority of these can be fit into existing DICOM Attributes, primarily via the "Contrast/Bolus" module.
We also demonstrate pipelines for utilizing DICOM for HP 13C MRI. DICOM is the most common standard for clinical medical image storage and provides the flexibility to accommodate the unique aspects of HP 13C MRI, including the HP agent information but also spectroscopic and metabolite dimensions. The pipelines shown include creating DICOM objects for studies on human and animal imaging systems with various pulse sequences. We also show a python-based method to efficiently modify DICOM objects to incorporate the unique HP 13C MRI information that is not captured by existing pipelines. Moreover, we propose best practices for HP 13C MRI data storage that will support future multi-site trials, research studies and technical developments of this imaging technique.
△ Less
Submitted 5 May, 2024;
originally announced May 2024.
-
I-mode Plasma Confinement Improvement by Real-time Lithium Injection and its Classification on EAST Tokamak
Authors:
X. M. Zhong,
X. L. Zou,
A. D. Liu,
Y. T. Song,
G. Zhuang,
H. Q. Liu,
L. Q. Xu,
E. Z. Li,
B. Zhang,
G. Z. Zuo,
Z. Wang,
C. Zhou,
J. Zhang,
W. X. Shi,
L. T. Gao,
S. F. Wang,
W. Gao,
T. Q. Jia,
Q. Zang,
H. L. Zhao,
M. Wang,
H. D. Xu,
X. J. Wang,
X. Gao,
X. D. Lin
, et al. (3 additional authors not shown)
Abstract:
I-mode is a promising regime for future fusion reactors due to the high energy confinement and the moderate particle confinement. However, the effect of lithium, which has been widely applied for particle recycling and impurity control, on I-mode plasma is still unclear. Recently, experiments of real-time lithium powder injection on I-mode plasma have been carried out in EAST Tokamak. It was found…
▽ More
I-mode is a promising regime for future fusion reactors due to the high energy confinement and the moderate particle confinement. However, the effect of lithium, which has been widely applied for particle recycling and impurity control, on I-mode plasma is still unclear. Recently, experiments of real-time lithium powder injection on I-mode plasma have been carried out in EAST Tokamak. It was found that the confinement performance of the I-mode can be improved by the lithium powder injection, which can strongly reduce electron turbulence (ET) and then trigger ion turbulence (IT). Four different regimes of I-mode have been identified in EAST. The Type I I-mode plasma is characterized by the weakly coherent mode (WCM) and the geodesic-acoustic mode (GAM). The Type II I-mode is featured as the WCM and the edge temperature ring oscillation (ETRO). The Type III I-mode corresponds to the plasma with the co-existence of ETRO, GAM, and WCM. The Type IV I-mode denotes the plasma with only WCM but without ETRO and GAM. It has been observed that WCM and ETRO are increased with lithium powder injection due to the reduction of ion and electron turbulence, and the enhancement of the pedestal electron temperature gradient. EAST experiments demonstrate that lithium powder injection is an effective tool for real-time control and confinement improvement of I-mode plasma.
△ Less
Submitted 10 April, 2024;
originally announced April 2024.
-
Offline tagging of radon-induced backgrounds in XENON1T and applicability to other liquid xenon detectors
Authors:
E. Aprile,
J. Aalbers,
K. Abe,
S. Ahmed Maouloud,
L. Althueser,
B. Andrieu,
E. Angelino,
J. R. Angevaare,
D. Antón Martin,
F. Arneodo,
L. Baudis,
A. L. Baxter,
M. Bazyk,
L. Bellagamba,
R. Biondi,
A. Bismark,
E. J. Brookes,
A. Brown,
G. Bruno,
R. Budnik,
T. K. Bui,
J. M. R. Cardoso,
A. P. Cimental Chavez,
A. P. Colijn,
J. Conrad
, et al. (142 additional authors not shown)
Abstract:
This paper details the first application of a software tagging algorithm to reduce radon-induced backgrounds in liquid noble element time projection chambers, such as XENON1T and XENONnT. The convection velocity field in XENON1T was mapped out using $^{222}\text{Rn}$ and $^{218}\text{Po}$ events, and the root-mean-square convection speed was measured to be $0.30 \pm 0.01$ cm/s. Given this velocity…
▽ More
This paper details the first application of a software tagging algorithm to reduce radon-induced backgrounds in liquid noble element time projection chambers, such as XENON1T and XENONnT. The convection velocity field in XENON1T was mapped out using $^{222}\text{Rn}$ and $^{218}\text{Po}$ events, and the root-mean-square convection speed was measured to be $0.30 \pm 0.01$ cm/s. Given this velocity field, $^{214}\text{Pb}$ background events can be tagged when they are followed by $^{214}\text{Bi}$ and $^{214}\text{Po}$ decays, or preceded by $^{218}\text{Po}$ decays. This was achieved by evolving a point cloud in the direction of a measured convection velocity field, and searching for $^{214}\text{Bi}$ and $^{214}\text{Po}$ decays or $^{218}\text{Po}$ decays within a volume defined by the point cloud. In XENON1T, this tagging system achieved a $^{214}\text{Pb}$ background reduction of $6.2^{+0.4}_{-0.9}\%$ with an exposure loss of $1.8\pm 0.2 \%$, despite the timescales of convection being smaller than the relevant decay times. We show that the performance can be improved in XENONnT, and that the performance of such a software-tagging approach can be expected to be further improved in a diffusion-limited scenario. Finally, a similar method might be useful to tag the cosmogenic $^{137}\text{Xe}$ background, which is relevant to the search for neutrinoless double-beta decay.
△ Less
Submitted 19 June, 2024; v1 submitted 21 March, 2024;
originally announced March 2024.
-
Second gadolinium loading to Super-Kamiokande
Authors:
K. Abe,
C. Bronner,
Y. Hayato,
K. Hiraide,
K. Hosokawa,
K. Ieki,
M. Ikeda,
J. Kameda,
Y. Kanemura,
R. Kaneshima,
Y. Kashiwagi,
Y. Kataoka,
S. Miki,
S. Mine,
M. Miura,
S. Moriyama,
Y. Nakano,
M. Nakahata,
S. Nakayama,
Y. Noguchi,
K. Sato,
H. Sekiya,
H. Shiba,
K. Shimizu,
M. Shiozawa
, et al. (225 additional authors not shown)
Abstract:
The first loading of gadolinium (Gd) into Super-Kamiokande in 2020 was successful, and the neutron capture efficiency on Gd reached 50\%. To further increase the Gd neutron capture efficiency to 75\%, 26.1 tons of $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ was additionally loaded into Super-Kamiokande (SK) from May 31 to July 4, 2022. As the amount of loaded $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ was do…
▽ More
The first loading of gadolinium (Gd) into Super-Kamiokande in 2020 was successful, and the neutron capture efficiency on Gd reached 50\%. To further increase the Gd neutron capture efficiency to 75\%, 26.1 tons of $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ was additionally loaded into Super-Kamiokande (SK) from May 31 to July 4, 2022. As the amount of loaded $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ was doubled compared to the first loading, the capacity of the powder dissolving system was doubled. We also developed new batches of gadolinium sulfate with even further reduced radioactive impurities. In addition, a more efficient screening method was devised and implemented to evaluate these new batches of $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$. Following the second loading, the Gd concentration in SK was measured to be $333.5\pm2.5$ ppm via an Atomic Absorption Spectrometer (AAS). From the mean neutron capture time constant of neutrons from an Am/Be calibration source, the Gd concentration was independently measured to be 332.7 $\pm$ 6.8(sys.) $\pm$ 1.1(stat.) ppm, consistent with the AAS result. Furthermore, during the loading the Gd concentration was monitored continually using the capture time constant of each spallation neutron produced by cosmic-ray muons,and the final neutron capture efficiency was shown to become 1.5 times higher than that of the first loaded phase, as expected.
△ Less
Submitted 18 June, 2024; v1 submitted 12 March, 2024;
originally announced March 2024.
-
Enhanced beam-beam modeling to include longitudinal variation during weak-strong simulation
Authors:
Derong Xu,
Vasiliy S. Morozov,
David Sagan,
Yue Hao,
Yun Luo
Abstract:
Beam-beam interactions pose substantial challenges in the design and operation of circular colliders, significantly affecting their performance. In particular, the weak-strong simulation approach is pivotal for investigating single-particle dynamics during the collider design phase. This paper evaluates the limitations of existing models in weak-strong simulations, noting that while they accuratel…
▽ More
Beam-beam interactions pose substantial challenges in the design and operation of circular colliders, significantly affecting their performance. In particular, the weak-strong simulation approach is pivotal for investigating single-particle dynamics during the collider design phase. This paper evaluates the limitations of existing models in weak-strong simulations, noting that while they accurately account for energy changes due to slingshot effects, they fail to incorporate longitudinal coordinate changes ($z$-variation). To address this gap, we introduce two novel transformations that enhance Hirata's original framework by including both $z$-variation and slingshot effect-induced energy changes. Through rigorous mathematical analysis and extensive weak-strong simulation studies, we validate the efficacy of these enhancements in achieving a more precise simulation of beam-beam interactions. Our results reveal that although $z$-variation constitutes a higher-order effect and does not substantially affect the emittance growth rate within the specific design parameters of the Electron-Ion Collider (EIC), the refined model offers improved accuracy, particularly in scenarios involving the interaction between beam-beam effects and other random diffusion processes, as well as in simulations incorporating realistic lattice models.
△ Less
Submitted 20 June, 2024; v1 submitted 5 March, 2024;
originally announced March 2024.
-
Front-end electronics development of large-area SiPM arrays for high-precision single-photon time measurement
Authors:
Wei Zhi,
Ruike Cao,
Jiannan Tang,
Mingxin Wang,
Yongqi Tan,
Weihao Wu,
Donglian Xu
Abstract:
TRopIcal DEep-sea Neutrino Telescope (TRIDENT) plans to incorporate silicon photomultipliers (SiPMs) with superior time resolution in addition to photomultiplier tubes (PMTs) into its detection units, namely hybrid Digital Optical Modules (hDOMs), to improve its angular resolution. However, the time resolution significantly degrades for large-area SiPMs due to the large detector capacitance, posin…
▽ More
TRopIcal DEep-sea Neutrino Telescope (TRIDENT) plans to incorporate silicon photomultipliers (SiPMs) with superior time resolution in addition to photomultiplier tubes (PMTs) into its detection units, namely hybrid Digital Optical Modules (hDOMs), to improve its angular resolution. However, the time resolution significantly degrades for large-area SiPMs due to the large detector capacitance, posing significant challenges for the readout electronics of SiPMs in hDOM. We analyzed the influences of series and parallel connections when constructing a large-area SiPM array and designed a series-parallel connection SiPM array with differential output. We also designed a high-speed pre-amplifier based on transformers (MABA-007159) and radio frequency amplifiers (BGA2803), and an analog multi-channel summing circuit based on operational amplifiers (LMH6629). We measured the single photon time resolution (SPTR) of a $4\times4$ SiPM (Hamamatsu S13360-3050PE) array ($12\times12~\mathrm{mm}^2$) of approximately 300 ps FWHM. This front-end readout design enables the large-area SiPM array to achieve high-precision single photon time measurement in one readout channel.
△ Less
Submitted 7 June, 2024; v1 submitted 5 March, 2024;
originally announced March 2024.
-
Questioning whether seasonal advance of intense tropical cyclones since the 1980s truly exists
Authors:
Jimin Liu,
Jeremy Cheuk-Hin Leung,
Wenshou Tian,
Hong Huang,
Daosheng Xu,
Wei**g Li,
Weihong Qian,
Banglin Zhang
Abstract:
Shan et al. (2023) recently reported significant seasonal advances of intense tropical cyclones (TCs) in both the Northern Hemisphere (NH) and Southern Hemisphere (SH) since the 1980s and emphasized the data insensitivity of this conclusion, based on the advanced Dvorak Technique-Hurricane Satellite (ADT-HURSAT) and the International Best Track Archive for Climate Stewardship (IBTrACS) datasets. H…
▽ More
Shan et al. (2023) recently reported significant seasonal advances of intense tropical cyclones (TCs) in both the Northern Hemisphere (NH) and Southern Hemisphere (SH) since the 1980s and emphasized the data insensitivity of this conclusion, based on the advanced Dvorak Technique-Hurricane Satellite (ADT-HURSAT) and the International Best Track Archive for Climate Stewardship (IBTrACS) datasets. However, upon rigorously repeating the analysis procedure in Shan et al. (2023), we are unable to replicate their conclusion. Our analyses reveal that insignificant trends in median of intense TC occurrence dates (hereafter referred to as $\tilde{date}_{intenseTC}$) are observed in the SH based on the ADT-HURSAT, and in both hemispheres based on the IBTrACS. In addition, we discover inconsistencies in $\tilde{date}_{intenseTC}$ trends between the two datasets, which primarily arise from the differences in identification of intense TC cases. The above discrepancies raise doubts about the reproducibility and validity of Shan et al.'s conclusions regarding the seasonal advance of intense TCs. Based on these findings, as well as the limitations of both datasets, we argue that the reported seasonal advance of intense TCs since the 1980s is inconclusive and further investigations with alternative datasets and approaches are needed.
△ Less
Submitted 21 March, 2024; v1 submitted 1 March, 2024;
originally announced March 2024.
-
The XENONnT Dark Matter Experiment
Authors:
XENON Collaboration,
E. Aprile,
J. Aalbers,
K. Abe,
S. Ahmed Maouloud,
L. Althueser,
B. Andrieu,
E. Angelino,
J. R. Angevaare,
V. C. Antochi,
D. Antón Martin,
F. Arneodo,
M. Balata,
L. Baudis,
A. L. Baxter,
M. Bazyk,
L. Bellagamba,
R. Biondi,
A. Bismark,
E. J. Brookes,
A. Brown,
S. Bruenner,
G. Bruno,
R. Budnik,
T. K. Bui
, et al. (170 additional authors not shown)
Abstract:
The multi-staged XENON program at INFN Laboratori Nazionali del Gran Sasso aims to detect dark matter with two-phase liquid xenon time projection chambers of increasing size and sensitivity. The XENONnT experiment is the latest detector in the program, planned to be an upgrade of its predecessor XENON1T. It features an active target of 5.9 tonnes of cryogenic liquid xenon (8.5 tonnes total mass in…
▽ More
The multi-staged XENON program at INFN Laboratori Nazionali del Gran Sasso aims to detect dark matter with two-phase liquid xenon time projection chambers of increasing size and sensitivity. The XENONnT experiment is the latest detector in the program, planned to be an upgrade of its predecessor XENON1T. It features an active target of 5.9 tonnes of cryogenic liquid xenon (8.5 tonnes total mass in cryostat). The experiment is expected to extend the sensitivity to WIMP dark matter by more than an order of magnitude compared to XENON1T, thanks to the larger active mass and the significantly reduced background, improved by novel systems such as a radon removal plant and a neutron veto. This article describes the XENONnT experiment and its sub-systems in detail and reports on the detector performance during the first science run.
△ Less
Submitted 15 February, 2024;
originally announced February 2024.
-
The PMT System of the TRIDENT Pathfinder Experiment
Authors:
Fuyudi Zhang,
Fan Hu,
Shishen Xian,
Wei Tian,
Kun Jiang,
Wenlian Li,
Jianglai Liu,
Peng Miao,
Zhengyang Sun,
Jiannan Tang,
Zebo Tang,
Mingxin Wang,
Yan Wang,
Donglian Xu,
Zi** Ye
Abstract:
Next generation neutrino telescopes are highly anticipated to boost the development of neutrino astronomy. A multi-cubic-kilometer neutrino telescope, TRopIcal DEep-sea Neutrino Telescope (TRIDENT), was proposed to be built in the South China Sea. The detector aims to achieve ~ 0.1 degree angular resolution for track-like events at energy above 100 TeV by using hybrid digital optical modules, open…
▽ More
Next generation neutrino telescopes are highly anticipated to boost the development of neutrino astronomy. A multi-cubic-kilometer neutrino telescope, TRopIcal DEep-sea Neutrino Telescope (TRIDENT), was proposed to be built in the South China Sea. The detector aims to achieve ~ 0.1 degree angular resolution for track-like events at energy above 100 TeV by using hybrid digital optical modules, opening new opportunities for neutrino astronomy. In order to measure the water optical properties and marine environment of the proposed TRIDENT site, a pathfinder experiment was conducted, in which a 100-meter-long string consisting of three optical modules was deployed at a depth of 3420 m to perform in-situ measurements. The central module emits light by housing LEDs, whereas the other two modules detect light with two independent and complementary systems: the PMT and the camera systems. By counting the number of detected photons and analyzing the photon arrival time distribution, the PMT system can measure the absorption and scattering lengths of sea water, which serve as the basic inputs for designing the neutrino telescope. In this paper, we present the design concept, calibration and performance of the PMT system in the pathfinder experiment.
△ Less
Submitted 19 December, 2023;
originally announced December 2023.
-
Perfectly vertical silicon metamaterial grating couplers with large segmentation periods up to 650 nm
Authors:
Jianhao Zhang,
Daniele Melati,
Yuri Grinberg,
Martin Vachon,
Shurui Wang,
Muhammad Al-Digeil,
Siegfried Janz,
Jens H. Schmid,
Pavel Cheben,
Dan-Xia Xu
Abstract:
Perfectly vertical grating couplers leveraging metamaterials can achieve both high coupling efficiency and minimal back reflection. The fabricability of these designs, with segmentations in both the longitudinal and transverse dimensions, hinges on the minimum feature size offered by cutting-edge fabrication technologies. In this work we present both numerical and experimental evidence that high p…
▽ More
Perfectly vertical grating couplers leveraging metamaterials can achieve both high coupling efficiency and minimal back reflection. The fabricability of these designs, with segmentations in both the longitudinal and transverse dimensions, hinges on the minimum feature size offered by cutting-edge fabrication technologies. In this work we present both numerical and experimental evidence that high performance devices can be obtained while using large transverse segmentation periods of up to 650 nm, thereby increasing the critical feature sizes. For single-step etched couplers produced on the 220 nm silicon-on-insulator platform, we demonstrate coupling efficiencies of nearly 50% in the C-band and remarkably low back reflections of -22 dB at zero-degree incidence angle. Notably, the duty cycles used in our optimized designs deviate significantly from those predicted by traditional effective medium models, even for small periods. Our findings promise to expand the range of optical properties achievable in metamaterials and offer fresh insights into the fine-tuning of nanophotonic devices.
△ Less
Submitted 18 November, 2023;
originally announced November 2023.
-
A Two-Step Framework for Multi-Material Decomposition of Dual Energy Computed Tomography from Projection Domain
Authors:
Di Xu,
Qihui Lyu,
Dan Ruan,
Ke Sheng
Abstract:
Dual-energy computed tomography (DECT) utilizes separate X-ray energy spectra to improve multi-material decomposition (MMD) for various diagnostic applications. However accurate decomposing more than two types of material remains challenging using conventional methods. Deep learning (DL) methods have shown promise to improve the MMD performance, but typical approaches of conducing DL-MMD in the im…
▽ More
Dual-energy computed tomography (DECT) utilizes separate X-ray energy spectra to improve multi-material decomposition (MMD) for various diagnostic applications. However accurate decomposing more than two types of material remains challenging using conventional methods. Deep learning (DL) methods have shown promise to improve the MMD performance, but typical approaches of conducing DL-MMD in the image domain fail to fully utilize projection information or under iterative setup are computationally inefficient in both training and prediction. In this work, we present a clinical-applicable MMD (>2) framework rFast-MMDNet, operating with raw projection data in non-recursive setup, for breast tissue differentiation. rFast-MMDNet is a two-stage algorithm, including stage-one SinoNet to perform dual energy projection decomposition on tissue sinograms and stage-two FBP-DenoiseNet to perform domain adaptation and image post-processing. rFast-MMDNet was tested on a 2022 DL-Spectral-Challenge breast phantom dataset. The two stages of rFast-MMDNet were evaluated separately and then compared with four noniterative reference methods including a direct inversion method (AA-MMD), an image domain DL method (ID-UNet), AA-MMD/ID-UNet + DenoiseNet and a sinogram domain DL method (Triple-CBCT). Our results show that models trained from information stored in DE transmission domain can yield high-fidelity decomposition of the adipose, calcification, and fibroglandular materials with averaged RMSE, MAE, negative PSNR, and SSIM of 0.004+/-~0, 0.001+/-~0, -45.027+/-~0.542, and 0.002+/-~0 benchmarking to the ground truth, respectively. Training of entire rFast-MMDNet on a 4xRTX A6000 GPU cluster took a day with inference time <1s. All DL methods generally led to more accurate MMD than AA-MMD. rFast-MMDNet outperformed Triple-CBCT, but both are superior to the image-domain based methods.
△ Less
Submitted 31 October, 2023;
originally announced November 2023.
-
Fabrication of electronically conductive protein-heme nanowires for power harvesting
Authors:
Lorenzo Travaglini,
Nga T. Lam,
Artur Sawicki,
Hee-Jeong Cha,
Dawei Xu,
Adam P. Micolich,
Douglas S. Clark,
Dominic J. Glover
Abstract:
Electronically conductive protein-based materials could enable the creation of bioelectronic components and devices from sustainable and nontoxic materials, while also being well-suited to interface with biological systems, such as living cells, for biosensor applications. In addition, protein materials have other desirable properties such as inherent self-assembly and molecular recognition capabi…
▽ More
Electronically conductive protein-based materials could enable the creation of bioelectronic components and devices from sustainable and nontoxic materials, while also being well-suited to interface with biological systems, such as living cells, for biosensor applications. In addition, protein materials have other desirable properties such as inherent self-assembly and molecular recognition capabilities. However, as proteins are generally electrical insulators, the ability to render protein assemblies electronically conductive in a tailorable manner could usher in a plethora of useful materials. Here, we present an approach to fabricate electronically conductive protein nanowires by incorporating and aligning heme molecules in proximity along an ultrastable protein filament. The heme-incorporated protein nanowires demonstrated electron transfer over micrometer distances, with conductive atomic force microscopy showing individual nanowires having comparable conductance to naturally occurring bacterial nanowires. The heme-incorporated nanowires were also capable of harvesting energy from ambient humidity when deposited as multilayer films. Exposure of films to humidity produced electrical current, presumably through water molecules ionizing carboxy groups in the protein filament and creating an unbalanced total charge distribution that is enhanced by the presence of heme. A wide variety of other porphyrin molecules exist with varying electrochemical behaviors that could enable the electrical properties of protein assemblies to be tailored, paving the way to structurally- and electrically-defined protein-based bioelectronic devices.
△ Less
Submitted 15 October, 2023;
originally announced October 2023.
-
Design and performance of the field cage for the XENONnT experiment
Authors:
E. Aprile,
K. Abe,
S. Ahmed Maouloud,
L. Althueser,
B. Andrieu,
E. Angelino,
J. R. Angevaare,
V. C. Antochi,
D. Antón Martin,
F. Arneodo,
L. Baudis,
A. L. Baxter,
M. Bazyk,
L. Bellagamba,
R. Biondi,
A. Bismark,
E. J. Brookes,
A. Brown,
S. Bruenner,
G. Bruno,
R. Budnik,
T. K. Bui,
C. Cai,
J. M. R. Cardoso,
D. Cichon
, et al. (139 additional authors not shown)
Abstract:
The precision in reconstructing events detected in a dual-phase time projection chamber depends on an homogeneous and well understood electric field within the liquid target. In the XENONnT TPC the field homogeneity is achieved through a double-array field cage, consisting of two nested arrays of field sha** rings connected by an easily accessible resistor chain. Rather than being connected to t…
▽ More
The precision in reconstructing events detected in a dual-phase time projection chamber depends on an homogeneous and well understood electric field within the liquid target. In the XENONnT TPC the field homogeneity is achieved through a double-array field cage, consisting of two nested arrays of field sha** rings connected by an easily accessible resistor chain. Rather than being connected to the gate electrode, the topmost field sha** ring is independently biased, adding a degree of freedom to tune the electric field during operation. Two-dimensional finite element simulations were used to optimize the field cage, as well as its operation. Simulation results were compared to ${}^{83m}\mathrm{Kr}$ calibration data. This comparison indicates an accumulation of charge on the panels of the TPC which is constant over time, as no evolution of the reconstructed position distribution of events is observed. The simulated electric field was then used to correct the charge signal for the field dependence of the charge yield. This correction resolves the inconsistent measurement of the drift electron lifetime when using different calibrations sources and different field cage tuning voltages.
△ Less
Submitted 21 September, 2023;
originally announced September 2023.
-
Optical wavefront phase-tilt measurement using Si-photonic waveguide grating couplers
Authors:
Siegfried Janz,
Dan-Xia Xu,
Yuri Grinberg,
Shurui Wang,
Martin Vachon,
Pavel Cheben,
Jens H. Schmid,
Daniele Melati
Abstract:
Silicon photonic wavefront phase-tilt sensors for wavefront monitoring using surface coupling grating arrays are demonstrated. The first design employs the intrinsic angle dependence of the grating coupling efficiency to determine local wavefront tilt, with a measured sensitivity of 7 dB/degree. A second design connects four gratings in an interferometric waveguide circuit to determine incident wa…
▽ More
Silicon photonic wavefront phase-tilt sensors for wavefront monitoring using surface coupling grating arrays are demonstrated. The first design employs the intrinsic angle dependence of the grating coupling efficiency to determine local wavefront tilt, with a measured sensitivity of 7 dB/degree. A second design connects four gratings in an interferometric waveguide circuit to determine incident wavefront phase variation across the sensor area. In this device, one fringe spacing corresponds to approximately 2 degree wavefront tilt change. These sensor elements can sample a wavefront incident on the chip surface without the use of bulk optic elements, fiber arrays, or imaging arrays. Both sensor elements are less than 60 um across, and can be combined into larger arrays to monitor wavefront tilt and distortion across an image or pupil plane in adaptive optics systems for free space optical communications, astronomy and beam pointing applications.
△ Less
Submitted 20 September, 2023;
originally announced September 2023.
-
Current Methods for Hyperpolarized [1-13C]pyruvate MRI Human Studies
Authors:
Peder EZ Larson,
Jenna ML Bernard,
James A Bankson,
Nikolaj Bøgh,
Robert A Bok,
Albert P. Chen,
Charles H Cunningham,
Jeremy Gordon,
Jan-Bernd Hövener,
Christoffer Laustsen,
Dirk Mayer,
Mary A McLean,
Franz Schilling,
James Slater,
Jean-Luc Vanderheyden,
Cornelius von Morze,
Daniel B Vigneron,
Duan Xu,
the HP 13C MRI Consensus Group
Abstract:
MRI with hyperpolarized (HP) 13C agents, also known as HP 13C MRI, can measure processes such as localized metabolism that is altered in numerous cancers, liver, heart, kidney diseases, and more. It has been translated into human studies during the past 10 years, with recent rapid growth in studies largely based on increasing availability of hyperpolarized agent preparation methods suitable for us…
▽ More
MRI with hyperpolarized (HP) 13C agents, also known as HP 13C MRI, can measure processes such as localized metabolism that is altered in numerous cancers, liver, heart, kidney diseases, and more. It has been translated into human studies during the past 10 years, with recent rapid growth in studies largely based on increasing availability of hyperpolarized agent preparation methods suitable for use in humans. This paper aims to capture the current successful practices for HP MRI human studies with [1-13C]pyruvate - by far the most commonly used agent, which sits at a key metabolic junction in glycolysis. The paper is divided into four major topic areas: (1) HP 13C-pyruvate preparation, (2) MRI system setup and calibrations, (3) data acquisition and image reconstruction, and (4) data analysis and quantification. In each area, we identified the key components for a successful study, summarized both published studies and current practices, and discuss evidence gaps, strengths, and limitations. This paper is the output of the HP 13C MRI Consensus Group as well as the ISMRM Hyperpolarized Media MR and Hyperpolarized Methods & Equipment study groups. It further aims to provide a comprehensive reference for future consensus building as the field continues to advance human studies with this metabolic imaging modality.
△ Less
Submitted 22 November, 2023; v1 submitted 7 September, 2023;
originally announced September 2023.
-
Unified Statistical Channel Modeling and performance analysis of Vertical Underwater Wireless Optical Communication Links considering Turbulence-Induced Fading
Authors:
Dongling Xu,
Xiang Yi,
Yalçn Ata,
Xinyue Tao,
Yuxuan Li,
Peng Yue
Abstract:
The reliability of a vertical underwater wireless optical communication (UWOC) network is seriously impacted by turbulence-induced fading due to fluctuations in the water temperature and salinity, which vary with depth. To better assess the vertical UWOC system performances, an accurate probability distribution function (PDF) model that can describe this fading is indispensable. In view of the lim…
▽ More
The reliability of a vertical underwater wireless optical communication (UWOC) network is seriously impacted by turbulence-induced fading due to fluctuations in the water temperature and salinity, which vary with depth. To better assess the vertical UWOC system performances, an accurate probability distribution function (PDF) model that can describe this fading is indispensable. In view of the limitations of theoretical and experimental studies, this paper is the first to establish a more accurate modeling scheme for wave optics simulation (WOS) by fully considering the constraints of sampling conditions on multi-phase screen parameters. On this basis, we complete the modeling of light propagation in a vertical oceanic turbulence channel and subsequently propose a unified statistical model named mixture Weibull-generalized Gamma (WGG) distribution model to characterize turbulence-induced fading in vertical links. Interestingly, the WGG model is shown to provide a perfect fit with the acquired data under all considered channel conditions. We further show that the application of the WGG model leads to closed-form and analytically tractable expressions for key UWOC system performance metrics such as the average bit-error rate (BER). The presented results give valuable insight into the practical aspects of development of UWOC networks.
△ Less
Submitted 8 August, 2023;
originally announced August 2023.
-
Measurement Accuracy in Silicon Photonic Ring Resonator Thermometers: Identifying and Mitigating Intrinsic Impairments
Authors:
Siegfried Janz,
Sergey Dedyulin,
D. -X. Xu,
Martin Vachon,
Shurui Wang,
Ross Cheriton,
John Weber
Abstract:
Silicon photonic ring resonator thermometers have been shown to provide temperature measurements with a 10 mK accuracy. In this work we identify and quantify the intrinsic on-chip impairments that may limit further improvement in temperature measurement accuracy. The impairments arise from optically induced changes in the waveguide effective index, and from back-reflections and scattering at defec…
▽ More
Silicon photonic ring resonator thermometers have been shown to provide temperature measurements with a 10 mK accuracy. In this work we identify and quantify the intrinsic on-chip impairments that may limit further improvement in temperature measurement accuracy. The impairments arise from optically induced changes in the waveguide effective index, and from back-reflections and scattering at defects and interfaces inside the ring cavity and along the path between light source and detector. These impairments are characterized for 220 x 500 nm Si waveguide rings by experimental measurement in a calibrated temperature bath and by phenomenological models of ring response. At different optical power levels both positive and negative light induced resonance shifts are observed. For a ring with L = 100 um cavity length, the self-heating induced resonance red shift can alter the temperature reading by 200 mK at 1 mW incident power, while a small blue shift is observed below 100 uW. The effect of self-heating is shown to be effectively suppressed by choosing longer ring cavities. Scattering and back-reflections often produce split and distorted resonance line shapes. Although these distortions can vary with resonance order, they are almost completely invariant with temperature for a given resonance and do not lead to measurement errors in themselves. The effect of line shape distortions can largely be mitigated by tracking only selected resonance orders with negligible shape distortion, and by measuring the resonance minimum wavelength directly, rather than attempting to fit the entire resonance line shape. The results demonstrate the temperature error due to these impairments can be limited to below the 3 mK level through appropriate design choices and measurement procedures.
△ Less
Submitted 27 June, 2023;
originally announced June 2023.
-
Nanometer displacement measurement based on metrological self-mixing grating interferometer traceable to the pitch standard of one-dimension chromium self-traceable grating
Authors:
Zhenjie Gu,
Zhangning Xie,
Zhikun Chang,
Guangxu Xiao,
Zhijun Yin,
Zichao Lin,
Tong Zhou,
Lihua Lei,
Tao **,
Dongbai Xue,
Xiao Deng,
Xinbin Chen,
Tongbao Li
Abstract:
Traceability of precision instrument and measuring method is the core issue in metrology science. In the field of nanometer length measurement, the laser interferometers are usually used to trace the measurement value to the laser wavelength, but the laser wavelength is sensitive to the environment disturbance. Chromium self-traceable grating is an ideal nanometer length reference grating with pit…
▽ More
Traceability of precision instrument and measuring method is the core issue in metrology science. In the field of nanometer length measurement, the laser interferometers are usually used to trace the measurement value to the laser wavelength, but the laser wavelength is sensitive to the environment disturbance. Chromium self-traceable grating is an ideal nanometer length reference grating with pitch traceability, fabricated by the atomic lithography technique. The new nanometer length traceability chain can be established based on the pitch traceability of chromium self-traceable grating, which is often used to calibrate the systematic error of the atomic force microscope. In this paper, the metrological self-mixing grating interferometer based on the chromium self-traceable grating (SMGI-Cr) is firstly established, whose interfere phase is traceable to the pitch of the chromium self-traceable grating directly and traceable to the chromium atomic transition frequency of energy level 7 S 3 to 7 P 4 indirectly. The nanometer displacement measurement is also achieved by the SMGI-Cr. The measurement error is no more than 0.2366%, compared to a commercial interferometer.
△ Less
Submitted 25 June, 2023;
originally announced June 2023.
-
Chromium Self-Traceable Length Standard: Investigating Geometry and Diffraction for Length Traceability Chain
Authors:
Zichao Lin,
Yulin Yao,
Zhangning Xie,
Dongbai Xue,
Tong Zhou,
Zhaohui Tang,
Lihua Lei,
Tao **,
Xiong Dun,
Xiao Deng,
Xinbin Cheng,
Tongbao Li
Abstract:
Natural constant-based metrology methods offer an effective approach to achieving traceability in nanometric measurements. The Cr grating, fabricated by atom lithography and featuring a pitch of $d=212.7705\pm0.0049~{\rm nm}$ traceable to the Cr transition frequency $^{7}S_{3}$ $\rightarrow$ $^{7}P_{4}^{0}$, demonstrates potential as a self-traceable length standard in nano-length metrology by gra…
▽ More
Natural constant-based metrology methods offer an effective approach to achieving traceability in nanometric measurements. The Cr grating, fabricated by atom lithography and featuring a pitch of $d=212.7705\pm0.0049~{\rm nm}$ traceable to the Cr transition frequency $^{7}S_{3}$ $\rightarrow$ $^{7}P_{4}^{0}$, demonstrates potential as a self-traceable length standard in nano-length metrology by grating interferometer. This research aims to analyze and engineer the diffraction characteristics that enhance the Cr grating as a self-traceable length standard within the length traceability chain based on the Cr transition frequency. Accordingly, we investigate the geometric morphology and diffraction characteristics of the Cr grating, analyzes the influence of the grating's polarization-sensitive characteristics on the Littrow configuration grating interferometer, and establishes the criteria for Cr grating fabrication. Experimentally, we fabricate an expanded Cr grating by scanning atom lithography, characterize its diffraction performance, and conduct preliminary verification of length measurement in a self-traceable grating interferometer. This work adheres to the international trend of flattened metrology development, offering a valuable reference for advancing subsequent metrological technologies throughout the new traceability chain.
△ Less
Submitted 24 June, 2023;
originally announced June 2023.
-
Search for events in XENON1T associated with Gravitational Waves
Authors:
XENON Collaboration,
E. Aprile,
K. Abe,
S. Ahmed Maouloud,
L. Althueser,
B. Andrieu,
E. Angelino,
J. R. Angevaare,
V. C. Antochi,
D. Antoń Martin,
F. Arneodo,
L. Baudis,
A. L. Baxter,
M. Bazyk,
L. Bellagamba,
R. Biondi,
A. Bismark,
E. J. Brookes,
A. Brown,
S. Bruenner,
G. Bruno,
R. Budnik,
T. K. Bui,
C. Cai,
J. M. R. Cardoso
, et al. (138 additional authors not shown)
Abstract:
We perform a blind search for particle signals in the XENON1T dark matter detector that occur close in time to gravitational wave signals in the LIGO and Virgo observatories. No particle signal is observed in the nuclear recoil, electronic recoil, CE$ν$NS, and S2-only channels within $\pm$ 500 seconds of observations of the gravitational wave signals GW170104, GW170729, GW170817, GW170818, and GW1…
▽ More
We perform a blind search for particle signals in the XENON1T dark matter detector that occur close in time to gravitational wave signals in the LIGO and Virgo observatories. No particle signal is observed in the nuclear recoil, electronic recoil, CE$ν$NS, and S2-only channels within $\pm$ 500 seconds of observations of the gravitational wave signals GW170104, GW170729, GW170817, GW170818, and GW170823. We use this null result to constrain mono-energetic neutrinos and Beyond Standard Model particles emitted in the closest coalescence GW170817, a binary neutron star merger. We set new upper limits on the fluence (time-integrated flux) of coincident neutrinos down to 17 keV at 90% confidence level. Furthermore, we constrain the product of coincident fluence and cross section of Beyond Standard Model particles to be less than $10^{-29}$ cm$^2$/cm$^2$ in the [5.5-210] keV energy range at 90% confidence level.
△ Less
Submitted 27 October, 2023; v1 submitted 20 June, 2023;
originally announced June 2023.
-
The Lobster Eye Imager for Astronomy Onboard the SATech-01 Satellite
Authors:
Z. X. Ling,
X. J. Sun,
C. Zhang,
S. L. Sun,
G. **,
S. N. Zhang,
X. F. Zhang,
J. B. Chang,
F. S. Chen,
Y. F. Chen,
Z. W. Cheng,
W. Fu,
Y. X. Han,
H. Li,
J. F. Li,
Y. Li,
Z. D. Li,
P. R. Liu,
Y. H. Lv,
X. H. Ma,
Y. J. Tang,
C. B. Wang,
R. J. Xie,
Y. L. Xue,
A. L. Yan
, et al. (101 additional authors not shown)
Abstract:
The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (Fo…
▽ More
The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (FoV) of 346 square degrees (18.6 degrees * 18.6 degrees) of the X-ray imager is realized. An optical assembly composed of 36 MPO chips is used to focus incident X-ray photons, and four large-format complementary metal-oxide semiconductor (CMOS) sensors, each of 6 cm * 6 cm, are used as the focal plane detectors. The instrument has an angular resolution of 4 - 8 arcmin (in FWHM) for the central focal spot of the point spread function, and an effective area of 2 - 3 cm2 at 1 keV in essentially all the directions within the field of view. The detection passband is 0.5 - 4 keV in the soft X-rays and the sensitivity is 2 - 3 * 10-11 erg s-1 cm-2 (about 1 mini-Crab) at 1,000 second observation. The total weight of LEIA is 56 kg and the power is 85 W. The satellite, with a design lifetime of 2 years, operates in a Sun-synchronous orbit of 500 km with an orbital period of 95 minutes. LEIA is paving the way for future missions by verifying in flight the technologies of both novel focusing imaging optics and CMOS sensors for X-ray observation, and by optimizing the working setups of the instrumental parameters. In addition, LEIA is able to carry out scientific observations to find new transients and to monitor known sources in the soft X-ray band, albeit limited useful observing time available.
△ Less
Submitted 24 May, 2023;
originally announced May 2023.
-
Wall cooling effect on spectra and structures of thermodynamic variables in hypersonic turbulent boundary layers
Authors:
Dehao Xu,
Jianchun Wang,
Shiyi Chen
Abstract:
The wall cooling effect on the spectra and structures of thermodynamic variables are investigated in hypersonic turbulent boundary layers. The density and temperature can be divided into the acoustic and entropic modes based on the Kovasznay decomposition. The intensities of the pressure and the acoustic modes of density and temperature attain the maximum values near the wall, while those of the e…
▽ More
The wall cooling effect on the spectra and structures of thermodynamic variables are investigated in hypersonic turbulent boundary layers. The density and temperature can be divided into the acoustic and entropic modes based on the Kovasznay decomposition. The intensities of the pressure and the acoustic modes of density and temperature attain the maximum values near the wall, while those of the entropy and the entropic modes of density and temperature achieve their primary peaks near the edge of boundary layer. In the near-wall region, the pressure and the acoustic modes of density and temperature are significantly enhanced when the wall is strongly cooled, which can be attributed to the appearance of the travelling-wave-like alternating positive and negative structures. Moreover, the intensities of the entropy and the entropic modes of density and temperature become stronger near the wall as the wall temperature decreases, due to the appearance of the streaky entropic structures. The streaky entropic structures are mainly caused by the advection effect of the strong positive wall-normal gradient of the mean temperature associated with ejection and sweep events. {It is also found that the profiles of the intensities of the entropy, density and temperature are similar to each other far from the wall, which are mainly due to the reason that the entropic modes are dominant in the fluctuating density and temperature in the far-wall region. The acoustic modes of density and temperature only have significant contributions in the near-wall region.
△ Less
Submitted 18 May, 2023;
originally announced May 2023.
-
Search for astrophysical electron antineutrinos in Super-Kamiokande with 0.01wt% gadolinium-loaded water
Authors:
M. Harada,
K. Abe,
C. Bronner,
Y. Hayato,
K. Hiraide,
K. Hosokawa,
K. Ieki,
M. Ikeda,
J. Kameda,
Y. Kanemura,
R. Kaneshima,
Y. Kashiwagi,
Y. Kataoka,
S. Miki,
S. Mine,
M. Miura,
S. Moriyama,
Y. Nakano,
M. Nakahata,
S. Nakayama,
Y. Noguchi,
K. Okamoto,
K. Sato,
H. Sekiya,
H. Shiba
, et al. (216 additional authors not shown)
Abstract:
We report the first search result for the flux of astrophysical electron antineutrinos for energies O(10) MeV in the gadolinium-loaded Super-Kamiokande (SK) detector. In June 2020, gadolinium was introduced to the ultra-pure water of the SK detector in order to detect neutrons more efficiently. In this new experimental phase, SK-Gd, we can search for electron antineutrinos via inverse beta decay w…
▽ More
We report the first search result for the flux of astrophysical electron antineutrinos for energies O(10) MeV in the gadolinium-loaded Super-Kamiokande (SK) detector. In June 2020, gadolinium was introduced to the ultra-pure water of the SK detector in order to detect neutrons more efficiently. In this new experimental phase, SK-Gd, we can search for electron antineutrinos via inverse beta decay with efficient background rejection and higher signal efficiency thanks to the high efficiency of the neutron tagging technique. In this paper, we report the result for the initial stage of SK-Gd with a $22.5\times552$ $\rm kton\cdot day$ exposure at 0.01% Gd mass concentration. No significant excess over the expected background in the observed events is found for the neutrino energies below 31.3 MeV. Thus, the flux upper limits are placed at the 90% confidence level. The limits and sensitivities are already comparable with the previous SK result with pure-water ($22.5 \times 2970 \rm kton\cdot day$) owing to the enhanced neutron tagging.
△ Less
Submitted 30 May, 2023; v1 submitted 8 May, 2023;
originally announced May 2023.
-
A fast tunable driver of light source for the TRIDENT Pathfinder experiment
Authors:
Jiannan Tang,
Weihao Wu,
Liang Li,
Peng Miao,
Zhengyang Sun,
Mingxin Wang,
Donglian Xu
Abstract:
TRIDENT (The tRopIcal DEep-sea Neutrino Telescope) is a proposed next-generation neutrino telescope to be constructed in the South China Sea. In September 2021, the TRIDENT Pathfinder experiment (TRIDENT EXplorer, T-REX for short) was conducted to evaluate the in-situ optical properties of seawater. The T-REX experiment deployed three digital optical modules at a depth of 3420 meters, including a…
▽ More
TRIDENT (The tRopIcal DEep-sea Neutrino Telescope) is a proposed next-generation neutrino telescope to be constructed in the South China Sea. In September 2021, the TRIDENT Pathfinder experiment (TRIDENT EXplorer, T-REX for short) was conducted to evaluate the in-situ optical properties of seawater. The T-REX experiment deployed three digital optical modules at a depth of 3420 meters, including a light emitter module (LEM) and two light receiver modules (LRMs) equipped with photomultiplier tubes (PMTs) and cameras to detect light signals. The LEM emits light in pulsing and steady modes. It features a fast tunable driver to activate light-emitting diodes (LEDs) that emit nanosecond-width light pulses with tunable intensity. The PMTs in the LRM receive single photo-electron (SPE) signals with an average photon number of approximately 0.3 per 1-microsecond time window, which is used to measure the arrival time distribution of the SPE signals. The fast tunable driver can be remotely controlled in real-time by the data acquisition system onboard the research vessel, allowing for convenient adjustments to the driver's parameters and facilitating the acquisition of high-quality experimental data. This paper describes the requirements, design scheme, and test results of the fast tunable driver, highlighting its successful implementation in the T-REX experiment and its potential for future deep-sea experiments.
△ Less
Submitted 13 July, 2023; v1 submitted 3 May, 2023;
originally announced May 2023.
-
Broadband nonlinear modulation of incoherent light using a transparent optoelectronic neuron array
Authors:
Dehui Zhang,
Dong Xu,
Yuhang Li,
Yi Luo,
**gtian Hu,
**gxuan Zhou,
Yucheng Zhang,
Boxuan Zhou,
Peiqi Wang,
Xurong Li,
Bijie Bai,
Huaying Ren,
Laiyuan Wang,
Mona Jarrahi,
Yu Huang,
Aydogan Ozcan,
Xiangfeng Duan
Abstract:
Nonlinear optical processing of ambient natural light is highly desired in computational imaging and sensing applications. A strong optical nonlinear response that can work under weak broadband incoherent light is essential for this purpose. Here we introduce an optoelectronic nonlinear filter array that can address this emerging need. By merging 2D transparent phototransistors (TPTs) with liquid…
▽ More
Nonlinear optical processing of ambient natural light is highly desired in computational imaging and sensing applications. A strong optical nonlinear response that can work under weak broadband incoherent light is essential for this purpose. Here we introduce an optoelectronic nonlinear filter array that can address this emerging need. By merging 2D transparent phototransistors (TPTs) with liquid crystal (LC) modulators, we create an optoelectronic neuron array that allows self-amplitude modulation of spatially incoherent light, achieving a large nonlinear contrast over a broad spectrum at orders-of-magnitude lower intensity than what is achievable in most optical nonlinear materials. For a proof-of-concept demonstration, we fabricated a 10,000-pixel array of optoelectronic neurons, each serving as a nonlinear filter, and experimentally demonstrated an intelligent imaging system that uses the nonlinear response to instantly reduce input glares while retaining the weaker-intensity objects within the field of view of a cellphone camera. This intelligent glare-reduction capability is important for various imaging applications, including autonomous driving, machine vision, and security cameras. Beyond imaging and sensing, this optoelectronic neuron array, with its rapid nonlinear modulation for processing incoherent broadband light, might also find applications in optical computing, where nonlinear activation functions that can work under ambient light conditions are highly sought.
△ Less
Submitted 26 April, 2023;
originally announced April 2023.
-
Searching for Heavy Dark Matter near the Planck Mass with XENON1T
Authors:
E. Aprile,
K. Abe,
S. Ahmed Maouloud,
L. Althueser,
B. Andrieu,
E. Angelino,
J. R. Angevaare,
V. C. Antochi,
D. Antón Martin,
F. Arneodo,
L. Baudis,
A. L. Baxter,
M. Bazyk,
L. Bellagamba,
R. Biondi,
A. Bismark,
E. J. Brookes,
A. Brown,
S. Bruenner,
G. Bruno,
R. Budnik,
T. K. Bui,
C. Cai,
J. M. R. Cardoso,
D. Cichon
, et al. (142 additional authors not shown)
Abstract:
Multiple viable theoretical models predict heavy dark matter particles with a mass close to the Planck mass, a range relatively unexplored by current experimental measurements. We use 219.4 days of data collected with the XENON1T experiment to conduct a blind search for signals from Multiply-Interacting Massive Particles (MIMPs). Their unique track signature allows a targeted analysis with only 0.…
▽ More
Multiple viable theoretical models predict heavy dark matter particles with a mass close to the Planck mass, a range relatively unexplored by current experimental measurements. We use 219.4 days of data collected with the XENON1T experiment to conduct a blind search for signals from Multiply-Interacting Massive Particles (MIMPs). Their unique track signature allows a targeted analysis with only 0.05 expected background events from muons. Following unblinding, we observe no signal candidate events. This work places strong constraints on spin-independent interactions of dark matter particles with a mass between 1$\times$10$^{12}\,$GeV/c$^2$ and 2$\times$10$^{17}\,$GeV/c$^2$. In addition, we present the first exclusion limits on spin-dependent MIMP-neutron and MIMP-proton cross-sections for dark matter particles with masses close to the Planck scale.
△ Less
Submitted 21 April, 2023;
originally announced April 2023.
-
First Dark Matter Search with Nuclear Recoils from the XENONnT Experiment
Authors:
XENON Collaboration,
E. Aprile,
K. Abe,
F. Agostini,
S. Ahmed Maouloud,
L. Althueser,
B. Andrieu,
E. Angelino,
J. R. Angevaare,
V. C. Antochi,
D. Antón Martin,
F. Arneodo,
L. Baudis,
A. L. Baxter,
M. Bazyk,
L. Bellagamba,
R. Biondi,
A. Bismark,
E. J. Brookes,
A. Brown,
S. Bruenner,
G. Bruno,
R. Budnik,
T. K. Bui,
C. Cai
, et al. (141 additional authors not shown)
Abstract:
We report on the first search for nuclear recoils from dark matter in the form of weakly interacting massive particles (WIMPs) with the XENONnT experiment which is based on a two-phase time projection chamber with a sensitive liquid xenon mass of $5.9$ t. During the approximately 1.1 tonne-year exposure used for this search, the intrinsic $^{85}$Kr and $^{222}$Rn concentrations in the liquid targe…
▽ More
We report on the first search for nuclear recoils from dark matter in the form of weakly interacting massive particles (WIMPs) with the XENONnT experiment which is based on a two-phase time projection chamber with a sensitive liquid xenon mass of $5.9$ t. During the approximately 1.1 tonne-year exposure used for this search, the intrinsic $^{85}$Kr and $^{222}$Rn concentrations in the liquid target were reduced to unprecedentedly low levels, giving an electronic recoil background rate of $(15.8\pm1.3)~\mathrm{events}/(\mathrm{t\cdot y \cdot keV})$ in the region of interest. A blind analysis of nuclear recoil events with energies between $3.3$ keV and $60.5$ keV finds no significant excess. This leads to a minimum upper limit on the spin-independent WIMP-nucleon cross section of $2.58\times 10^{-47}~\mathrm{cm}^2$ for a WIMP mass of $28~\mathrm{GeV}/c^2$ at $90\%$ confidence level. Limits for spin-dependent interactions are also provided. Both the limit and the sensitivity for the full range of WIMP masses analyzed here improve on previous results obtained with the XENON1T experiment for the same exposure.
△ Less
Submitted 5 August, 2023; v1 submitted 26 March, 2023;
originally announced March 2023.
-
Improving Fabrication Fidelity of Integrated Nanophotonic Devices Using Deep Learning
Authors:
Dusan Gostimirovic,
Yuri Grinberg,
Dan-Xia Xu,
Odile Liboiron-Ladouceur
Abstract:
Next-generation integrated nanophotonic device designs leverage advanced optimization techniques such as inverse design and topology optimization which achieve high performance and extreme miniaturization by optimizing a massively complex design space enabled by small feature sizes. However, unless the optimization is heavily constrained, the generated small features are not reliably fabricated, l…
▽ More
Next-generation integrated nanophotonic device designs leverage advanced optimization techniques such as inverse design and topology optimization which achieve high performance and extreme miniaturization by optimizing a massively complex design space enabled by small feature sizes. However, unless the optimization is heavily constrained, the generated small features are not reliably fabricated, leading to optical performance degradation. Even for simpler, conventional designs, fabrication-induced performance degradation still occurs. The degree of deviation from the original design not only depends on the size and shape of its features, but also on the distribution of features and the surrounding environment, presenting complex, proximity-dependent behavior. Without proprietary fabrication process specifications, design corrections can only be made after calibrating fabrication runs take place. In this work, we introduce a general deep machine learning model that automatically corrects photonic device design layouts prior to first fabrication. Only a small set of scanning electron microscopy images of engineered training features are required to create the deep learning model. With correction, the outcome of the fabricated layout is closer to what is intended, and thus so too is the performance of the design. Without modifying the nanofabrication process, adding significant computation in design, or requiring proprietary process specifications, we believe our model opens the door to new levels of reliability and performance in next-generation photonic circuits.
△ Less
Submitted 21 March, 2023;
originally announced March 2023.
-
Microscopic Theory of Multimode Polariton Dispersion in Multilayered Materials
Authors:
Arkajit Mandal,
Ding Xu,
Ankit Mahajan,
Joonho Lee,
Milan E. Delor,
David R. Reichman
Abstract:
We develop a microscopic theory for the multimode polariton dispersion in materials coupled to cavity radiation modes. Starting from a microscopic light-matter Hamiltonian, we devise a general strategy for obtaining simple matrix models of polariton dispersion curves based on the structure and spatial location of multi-layered 2D materials inside the optical cavity. Our theory exposes the connecti…
▽ More
We develop a microscopic theory for the multimode polariton dispersion in materials coupled to cavity radiation modes. Starting from a microscopic light-matter Hamiltonian, we devise a general strategy for obtaining simple matrix models of polariton dispersion curves based on the structure and spatial location of multi-layered 2D materials inside the optical cavity. Our theory exposes the connections between seemingly distinct models that have been employed in the literature and resolves an ambiguity that has arisen concerning the experimental description of the polaritonic band structure. We demonstrate the applicability of our theoretical formalism by fabricating various geometries of multi-layered perovskite materials coupled to cavities and demonstrating that our theoretical predictions agree with the experimental results presented here.
△ Less
Submitted 19 March, 2023;
originally announced March 2023.
-
The JUNO experiment Top Tracker
Authors:
JUNO Collaboration,
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Abid Aleem,
Tsagkarakis Alexandros,
Fengpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Weidong Bai,
Nikita Balashov,
Wander Baldini,
Andrea Barresi,
Davide Basilico,
Eric Baussan,
Marco Bellato
, et al. (592 additional authors not shown)
Abstract:
The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector…
▽ More
The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector, covering about 60% of the surface above them. The JUNO Top Tracker is constituted by the decommissioned OPERA experiment Target Tracker modules. The technology used consists in walls of two planes of plastic scintillator strips, one per transverse direction. Wavelength shifting fibres collect the light signal emitted by the scintillator strips and guide it to both ends where it is read by multianode photomultiplier tubes. Compared to the OPERA Target Tracker, the JUNO Top Tracker uses new electronics able to cope with the high rate produced by the high rock radioactivity compared to the one in Gran Sasso underground laboratory. This paper will present the new electronics and mechanical structure developed for the Top Tracker of JUNO along with its expected performance based on the current detector simulation.
△ Less
Submitted 9 March, 2023;
originally announced March 2023.
-
Nonlinear optics from hybrid dispersive orbits
Authors:
Yongjun Li,
Derong Xu,
Victor Smaluk,
Robert Rainer
Abstract:
In this paper we present an expansion of the technique of characterizing nonlinear optics from off-energy orbits (NOECO) to cover harmonic sextupoles in storage rings. The existing NOECO technique has been successfully used to correct the chromatic sextupole errors on the MAX-IV machine, however, it doesn't account for harmonic sextupoles, which are widely used on many other machines. Through gene…
▽ More
In this paper we present an expansion of the technique of characterizing nonlinear optics from off-energy orbits (NOECO) to cover harmonic sextupoles in storage rings. The existing NOECO technique has been successfully used to correct the chromatic sextupole errors on the MAX-IV machine, however, it doesn't account for harmonic sextupoles, which are widely used on many other machines. Through generating vertical dispersion with chromatic skew quadrupoles, a measurable dependency of nonlinear optics on harmonic sextupoles can be observed from hybrid horizontal and vertical dispersive orbits. Proof of concept of our expanded technique was accomplished by simulations and beam measurements on the National Synchrotron Light Source II (NSLS-II) storage ring.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
JUNO sensitivity to $^7$Be, $pep$, and CNO solar neutrinos
Authors:
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Abid Aleem,
Tsagkarakis Alexandros,
Fengpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Weidong Bai,
Nikita Balashov,
Wander Baldini,
Andrea Barresi,
Davide Basilico,
Eric Baussan,
Marco Bellato,
Marco Beretta
, et al. (592 additional authors not shown)
Abstract:
The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented…
▽ More
The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented levels of precision. In this paper, we provide estimation of the JUNO sensitivity to 7Be, pep, and CNO solar neutrinos that can be obtained via a spectral analysis above the 0.45 MeV threshold. This study is performed assuming different scenarios of the liquid scintillator radiopurity, ranging from the most opti mistic one corresponding to the radiopurity levels obtained by the Borexino experiment, up to the minimum requirements needed to perform the neutrino mass ordering determination with reactor antineutrinos - the main goal of JUNO. Our study shows that in most scenarios, JUNO will be able to improve the current best measurements on 7Be, pep, and CNO solar neutrino fluxes. We also perform a study on the JUNO capability to detect periodical time variations in the solar neutrino flux, such as the day-night modulation induced by neutrino flavor regeneration in Earth, and the modulations induced by temperature changes driven by helioseismic waves.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
Design of the Readout Electronics for the TRIDENT Pathfinder Experiment
Authors:
M. X. Wang,
G. H. Gong,
P. Miao,
Z. Y. Sun,
J. N. Tang,
W. H. Wu,
D. L. Xu
Abstract:
The tRopIcal DEep-sea Neutrino Telescope (TRIDENT) is a future large-scale next-generation neutrino telescope. In September 2021, the TRIDENT pathfinder experiment (TRIDENT EXplorer, T-REX for short) completed in-situ measurements of deep-sea water properties in the South China Sea. The T-REX apparatus integrates two independent and complementary systems, a photomultiplier tube (PMT) and a camera…
▽ More
The tRopIcal DEep-sea Neutrino Telescope (TRIDENT) is a future large-scale next-generation neutrino telescope. In September 2021, the TRIDENT pathfinder experiment (TRIDENT EXplorer, T-REX for short) completed in-situ measurements of deep-sea water properties in the South China Sea. The T-REX apparatus integrates two independent and complementary systems, a photomultiplier tube (PMT) and a camera system, to measure the optical and radioactive properties of the deep-sea water. One light emitter module and two light receiver modules were deployed, which were synchronized by using White Rabbit (WR) technology. The light emitter module generates nanosecond-width LED pulses, while the light receiver module hosts three PMTs and a camera to detect photons. The submerged apparatus and the data acquisition system (DAQ) perform real-time command and data transmission. We report the design and performance of the readout electronics for T-REX, including hardware modules, firmware design for digital signal processing, and host-computer software.
△ Less
Submitted 6 March, 2023;
originally announced March 2023.
-
Length traceability chain based on chromium atom transition frequency
Authors:
Xiao Deng,
Zichao Lin,
Gaoliang Dai,
Zhaohui Tang,
Zhangning Xie,
Guangxu Xiao,
Zhijun Yin,
Lihua Lei,
Tao **,
Dongbai Xue,
Zhenjie Gu,
Xinbin Cheng,
Tongbao Li
Abstract:
Precise positioning measurement plays an important role in in today advanced manufacturing industry, and length traceability chain has been optimizing and enriching to fulfill the develo** and various precise positioning requirement. In this paper, we propose a new length traceability chain based on chromium atom transition frequency, which is a combining utilization of fundamental physical cons…
▽ More
Precise positioning measurement plays an important role in in today advanced manufacturing industry, and length traceability chain has been optimizing and enriching to fulfill the develo** and various precise positioning requirement. In this paper, we propose a new length traceability chain based on chromium atom transition frequency, which is a combining utilization of fundamental physical constant accuracy and grating interferometer environmental robustness. The selftraceable grating pitch standard, the selftraceable angle standard and the selftraceable grating interferometer are promising to improve the measurement accuracy, consistency and selfcalibration ability in situ for precise positioning.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
Implementation and performances of the IPbus protocol for the JUNO Large-PMT readout electronics
Authors:
Riccardo Triozzi,
Andrea Serafini,
Marco Bellato,
Antonio Bergnoli,
Matteo Bolognesi,
Riccardo Brugnera,
Vanessa Cerrone,
Chao Chen,
Barbara Clerbaux,
Alberto Coppi,
Daniele Corti,
Flavio dal Corso,
Jianmeng Dong,
Wei Dou,
Lei Fan,
Alberto Garfagnini,
Arsenii Gavrikov,
Guanghua Gong,
Marco Grassi,
Rosa Maria Guizzetti,
Shuang Hang,
Cong He,
Jun Hu,
Roberto Isocrate,
Beatrice Jelmini
, et al. (107 additional authors not shown)
Abstract:
The Jiangmen Underground Neutrino Observatory (JUNO) is a large neutrino detector currently under construction in China. Thanks to the tight requirements on its optical and radio-purity properties, it will be able to perform leading measurements detecting terrestrial and astrophysical neutrinos in a wide energy range from tens of keV to hundreds of MeV. A key requirement for the success of the exp…
▽ More
The Jiangmen Underground Neutrino Observatory (JUNO) is a large neutrino detector currently under construction in China. Thanks to the tight requirements on its optical and radio-purity properties, it will be able to perform leading measurements detecting terrestrial and astrophysical neutrinos in a wide energy range from tens of keV to hundreds of MeV. A key requirement for the success of the experiment is an unprecedented 3% energy resolution, guaranteed by its large active mass (20 kton) and the use of more than 20,000 20-inch photo-multiplier tubes (PMTs) acquired by high-speed, high-resolution sampling electronics located very close to the PMTs. As the Front-End and Read-Out electronics is expected to continuously run underwater for 30 years, a reliable readout acquisition system capable of handling the timestamped data stream coming from the Large-PMTs and permitting to simultaneously monitor and operate remotely the inaccessible electronics had to be developed. In this contribution, the firmware and hardware implementation of the IPbus based readout protocol will be presented, together with the performances measured on final modules during the mass production of the electronics.
△ Less
Submitted 20 February, 2023;
originally announced February 2023.
-
CMR exploration I -- filament structure with synthetic observations
Authors:
Shuo Kong,
Volker Ossenkopf-Okada,
Héctor G. Arce,
Ralf S. Klessen,
Duo Xu
Abstract:
In this paper, we carry out a pilot parameter exploration for the collision-induced magnetic reconnection (CMR) mechanism that forms filamentary molecular clouds. Following Kong et al. (2021), we utilize Athena++ to model CMR in the context of resistive magnetohydrodynamics (MHD), considering the effect from seven physical conditions, including the Ohmic resistivity ($η$), the magnetic field ($B$)…
▽ More
In this paper, we carry out a pilot parameter exploration for the collision-induced magnetic reconnection (CMR) mechanism that forms filamentary molecular clouds. Following Kong et al. (2021), we utilize Athena++ to model CMR in the context of resistive magnetohydrodynamics (MHD), considering the effect from seven physical conditions, including the Ohmic resistivity ($η$), the magnetic field ($B$), the cloud density ($ρ$), the cloud radius $R$, the isothermal temperature $T$, the collision velocity $v_x$, and the shear velocity $v_z$. Compared to their fiducial model, we consider a higher and a lower value for each one of the seven parameters. We quantify the exploration results with five metrics, including the density probability distribution function ($ρ$-PDF), the filament morphology (250 $μ$m dust emission), the $B$-$ρ$ relation, the dominant fiber width, and the ringiness that describes the significance of the ring-like sub-structures. The exploration forms straight and curved CMR-filaments with rich sub-structures that are highly variable in space and time. The variation translates to fluctuation in all the five metrics, reflecting the chaotic nature of magnetic reconnection in CMR. A temporary $B\proptoρ$ relation is noticeable during the first 0.6 Myr. Overall, the exploration provides useful initial insights to the CMR mechanism.
△ Less
Submitted 16 March, 2023; v1 submitted 16 February, 2023;
originally announced February 2023.
-
Mass testing of the JUNO experiment 20-inch PMTs readout electronics
Authors:
Alberto Coppi,
Beatrice Jelmini,
Marco Bellato,
Antonio Bergnoli,
Matteo Bolognesi,
Riccardo Brugnera,
Vanessa Cerrone,
Chao Chen,
Barbara Clerbaux,
Daniele Corti,
Flavio dal Corso,
Jianmeng Dong,
Wei Dou,
Lei Fan,
Alberto Garfagnini,
Arsenii Gavrikov,
Guanghua Gong,
Marco Grassi,
Rosa Maria Guizzetti,
Shuang Hang,
Cong He,
Jun Hu,
Roberto Isocrate,
Xiaolu Ji,
Xiaoshan Jiang
, et al. (107 additional authors not shown)
Abstract:
The Jiangmen Underground Neutrino Observatory (JUNO) is a multi-purpose, large size, liquid scintillator experiment under construction in China. JUNO will perform leading measurements detecting neutrinos from different sources (reactor, terrestrial and astrophysical neutrinos) covering a wide energy range (from 200 keV to several GeV). This paper focuses on the design and development of a test pro…
▽ More
The Jiangmen Underground Neutrino Observatory (JUNO) is a multi-purpose, large size, liquid scintillator experiment under construction in China. JUNO will perform leading measurements detecting neutrinos from different sources (reactor, terrestrial and astrophysical neutrinos) covering a wide energy range (from 200 keV to several GeV). This paper focuses on the design and development of a test protocol for the 20-inch PMT underwater readout electronics, performed in parallel to the mass production line. In a time period of about ten months, a total number of 6950 electronic boards were tested with an acceptance yield of 99.1%.
△ Less
Submitted 11 January, 2023;
originally announced January 2023.
-
The Triggerless Data Acquisition System of the XENONnT Experiment
Authors:
E. Aprile,
J. Aalbers,
K. Abe,
F. Agostini,
S. Ahmed Maouloud,
L. Althueser,
B. Andrieu,
E. Angelino,
J. R. Angevaare,
V. C. Antochi,
D. Antón Martin,
F. Arneodo,
L. Baudis,
A. L. Baxter,
L. Bellagamba,
R. Biondi,
A. Bismark,
E. J. Brookes,
A. Brown,
S. Bruenner,
G. Bruno,
R. Budnik,
T. K. Bui,
C. Cai,
J. M. R. Cardoso
, et al. (140 additional authors not shown)
Abstract:
The XENONnT detector uses the latest and largest liquid xenon-based time projection chamber (TPC) operated by the XENON Collaboration, aimed at detecting Weakly Interacting Massive Particles and conducting other rare event searches. The XENONnT data acquisition (DAQ) system constitutes an upgraded and expanded version of the XENON1T DAQ system. For its operation, it relies predominantly on commerc…
▽ More
The XENONnT detector uses the latest and largest liquid xenon-based time projection chamber (TPC) operated by the XENON Collaboration, aimed at detecting Weakly Interacting Massive Particles and conducting other rare event searches. The XENONnT data acquisition (DAQ) system constitutes an upgraded and expanded version of the XENON1T DAQ system. For its operation, it relies predominantly on commercially available hardware accompanied by open-source and custom-developed software. The three constituent subsystems of the XENONnT detector, the TPC (main detector), muon veto, and the newly introduced neutron veto, are integrated into a single DAQ, and can be operated both independently and as a unified system. In total, the DAQ digitizes the signals of 698 photomultiplier tubes (PMTs), of which 253 from the top PMT array of the TPC are digitized twice, at $\times10$ and $\times0.5$ gain. The DAQ for the most part is a triggerless system, reading out and storing every signal that exceeds the digitization thresholds. Custom-developed software is used to process the acquired data, making it available within $\mathcal{O}\left(10\text{ s}\right)$ for live data quality monitoring and online analyses. The entire system with all the three subsystems was successfully commissioned and has been operating continuously, comfortably withstanding readout rates that exceed $\sim500$ MB/s during calibration. Livetime during normal operation exceeds $99\%$ and is $\sim90\%$ during most high-rate calibrations. The combined DAQ system has collected more than 2 PB of both calibration and science data during the commissioning of XENONnT and the first science run.
△ Less
Submitted 21 December, 2022;
originally announced December 2022.
-
Validation and integration tests of the JUNO 20-inch PMTs readout electronics
Authors:
Vanessa Cerrone,
Katharina von Sturm,
Marco Bellato,
Antonio Bergnoli,
Matteo Bolognesi,
Riccardo Brugnera,
Chao Chen,
Barbara Clerbaux,
Alberto Coppi,
Flavio dal Corso,
Daniele Corti,
Jianmeng Dong,
Wei Dou,
Lei Fan,
Alberto Garfagnini,
Guanghua Gong,
Marco Grassi,
Shuang Hang,
Rosa Maria Guizzetti,
Cong He,
Jun Hu,
Roberto Isocrate,
Beatrice Jelmini,
Xiaolu Ji,
Xiaoshan Jiang
, et al. (105 additional authors not shown)
Abstract:
The Jiangmen Underground Neutrino Observatory (JUNO) is a large neutrino detector currently under construction in China. JUNO will be able to study the neutrino mass ordering and to perform leading measurements detecting terrestrial and astrophysical neutrinos in a wide energy range, spanning from 200 keV to several GeV. Given the ambitious physics goals of JUNO, the electronic system has to meet…
▽ More
The Jiangmen Underground Neutrino Observatory (JUNO) is a large neutrino detector currently under construction in China. JUNO will be able to study the neutrino mass ordering and to perform leading measurements detecting terrestrial and astrophysical neutrinos in a wide energy range, spanning from 200 keV to several GeV. Given the ambitious physics goals of JUNO, the electronic system has to meet specific tight requirements, and a thorough characterization is required. The present paper describes the tests performed on the readout modules to measure their performances.
△ Less
Submitted 16 December, 2022;
originally announced December 2022.
-
Reinforcement-learning-based control of convectively-unstable flows
Authors:
Da Xu,
Mengqi Zhang
Abstract:
This work reports the application of a model-free deep-reinforcement-learning-based (DRL) flow control strategy to suppress perturbations evolving in the 1-D linearised Kuramoto-Sivashinsky (KS) equation and 2-D boundary layer flows. The former is commonly used to model the disturbance develo** in flat-plate boundary layer flows. These flow systems are convectively unstable, being able to amplif…
▽ More
This work reports the application of a model-free deep-reinforcement-learning-based (DRL) flow control strategy to suppress perturbations evolving in the 1-D linearised Kuramoto-Sivashinsky (KS) equation and 2-D boundary layer flows. The former is commonly used to model the disturbance develo** in flat-plate boundary layer flows. These flow systems are convectively unstable, being able to amplify the upstream disturbance, and are thus difficult to control. The control action is implemented through a volumetric force at a fixed position and the control performance is evaluated by the reduction of perturbation amplitude downstream. We first demonstrate the effectiveness of the DRL-based control in the KS system subjected to a random upstream noise. The amplitude of perturbation monitored downstream is significantly reduced and the learnt policy is shown to be robust to both measurement and external noise. One of our focuses is to optimally place sensors in the DRL control using the gradient-free particle swarm optimisation algorithm. After the optimisation process for different numbers of sensors, a specific eight-sensor placement is found to yield the best control performance. The optimised sensor placement in the KS equation is applied directly to control 2-D Blasius boundary layer flows and can efficiently reduce the downstream perturbation energy. Via flow analyses, the control mechanism found by DRL is the opposition control. Besides, it is found that when the flow instability information is embedded in the reward function of DRL to penalise the instability, the control performance can be further improved in this convectively-unstable flow.
△ Less
Submitted 2 December, 2022;
originally announced December 2022.
-
Low-energy Calibration of XENON1T with an Internal $^{37}$Ar Source
Authors:
E. Aprile,
K. Abe,
F. Agostini,
S. Ahmed Maouloud,
M. Alfonsi,
L. Althueser,
B. Andrieu,
E. Angelino,
J. R. Angevaare,
V. C. Antochi,
D. Antón Martin,
F. Arneodo,
L. Baudis,
A. L. Baxter,
L. Bellagamba,
R. Biondi,
A. Bismark,
A. Brown,
S. Bruenner,
G. Bruno,
R. Budnik,
T. K. Bui,
C. Cai,
C. Capelli,
J. M. R. Cardoso
, et al. (139 additional authors not shown)
Abstract:
A low-energy electronic recoil calibration of XENON1T, a dual-phase xenon time projection chamber, with an internal $^{37}$Ar source was performed. This calibration source features a 35-day half-life and provides two mono-energetic lines at 2.82 keV and 0.27 keV. The photon yield and electron yield at 2.82 keV are measured to be (32.3$\pm$0.3) photons/keV and (40.6$\pm$0.5) electrons/keV, respecti…
▽ More
A low-energy electronic recoil calibration of XENON1T, a dual-phase xenon time projection chamber, with an internal $^{37}$Ar source was performed. This calibration source features a 35-day half-life and provides two mono-energetic lines at 2.82 keV and 0.27 keV. The photon yield and electron yield at 2.82 keV are measured to be (32.3$\pm$0.3) photons/keV and (40.6$\pm$0.5) electrons/keV, respectively, in agreement with other measurements and with NEST predictions. The electron yield at 0.27 keV is also measured and it is (68.0$^{+6.3}_{-3.7}$) electrons/keV. The $^{37}$Ar calibration confirms that the detector is well-understood in the energy region close to the detection threshold, with the 2.82 keV line reconstructed at (2.83$\pm$0.02) keV, which further validates the model used to interpret the low-energy electronic recoil excess previously reported by XENON1T. The ability to efficiently remove argon with cryogenic distillation after the calibration proves that $^{37}$Ar can be considered as a regular calibration source for multi-tonne xenon detectors.
△ Less
Submitted 21 March, 2023; v1 submitted 25 November, 2022;
originally announced November 2022.
-
Suppression of stimulated Raman scattering by angularly incoherent light, towards a laser system of incoherence in all dimensions of time, space, and angle
Authors:
Yi Guo,
Xiaomei Zhang,
Dirui Xu,
Xinju Guo,
Baifei Shen,
Ke Lan
Abstract:
Laser-plasma instability (LPI) is one of the main obstacles in laser-driven inertial confinement fusion (ICF) for achieving predictable and reproducible fusion at high gain. For the first time we have proved analytically and confirmed with three-dimensional particle-in-cell simulations that angular incoherence has additional and much stronger suppression of the instability growth rate than the wel…
▽ More
Laser-plasma instability (LPI) is one of the main obstacles in laser-driven inertial confinement fusion (ICF) for achieving predictable and reproducible fusion at high gain. For the first time we have proved analytically and confirmed with three-dimensional particle-in-cell simulations that angular incoherence has additional and much stronger suppression of the instability growth rate than the well-known temporal incoherence and spatial incoherence usually used in ICF studies. For the model used in our calculations, the maximum field ratio between the stimulated Raman scattering and the driving pulses drops from 0.2 for the Laguerre-Gaussian pulse with a single non-zero topological charge to 0.05 for the super light spring with an angular momentum spread and random relative phases. In particular, angular incoherence does not introduce extra undesirable hot electrons. This opens a novel way to suppress LPI with the light of an angular momentum spread and paves the way towards a low LPI laser system with a super light spring of incoherence in all dimensions of time, space, and angle.
△ Less
Submitted 21 November, 2022;
originally announced November 2022.
-
Coherence-Assisted Superradiant Laser with Hz Linewidth and $10^{-10}$W Power
Authors:
Guohui Dong,
Yao Yao,
Peng Zhang,
Dazhi Xu
Abstract:
The superradiant laser, based on the clock transition between the electric ground state $^1$S$_0$ and the metastable state $^3$P$_0$ of fermionic alkaline-earth(-like) atoms, has been proposed to be a new promising light source with linewidth being the order of millihertz. However, due to the small $^1$S$_0$-to-$^3$P$_0$ transition strength, the steady-state power in that system is relatively low…
▽ More
The superradiant laser, based on the clock transition between the electric ground state $^1$S$_0$ and the metastable state $^3$P$_0$ of fermionic alkaline-earth(-like) atoms, has been proposed to be a new promising light source with linewidth being the order of millihertz. However, due to the small $^1$S$_0$-to-$^3$P$_0$ transition strength, the steady-state power in that system is relatively low ($\sim 10^{-12}$W). In this work, we propose an alternative superradiant laser scheme based on a Raman-transition-induced coupling between the $^3$P$_0$ and $^3$P$_1$ states in bosonic alkaline-earth(-like) atoms, and achieve a laser with linewidth $\lesssim 2π\times1$Hz and power $\gtrsim 10^{-10}$W ($\sim 10^{3}$ photons in steady state) at a small pum** cost. The Raman beams play two significant roles in our scheme. First, the coherence between the dark and bright states induced by the Raman beams produce a new local minimum in the pum**-linewidth curve with pum** rate lower than $2π\times 10$kHz, which is beneficial for continuous output. Second, the Raman beams mix the long-lived $^3$P$_0$ state into the lasing state and thus reduce the linewidth. Our work greatly improves the output performance of the superradiant laser system with coherence induced by Raman transitions and may offer a firm foundation for its practical use in future.
△ Less
Submitted 13 November, 2022;
originally announced November 2022.
-
Direct dark matter searches with the full data set of XMASS-I
Authors:
XMASS Collaboration,
K. Abe,
K. Hiraide,
N. Kato,
S. Moriyama,
M. Nakahata,
K. Sato,
H. Sekiya,
T. Suzuki,
Y. Suzuki,
A. Takeda,
B. S. Yang,
N. Y. Kim,
Y. D. Kim,
Y. H. Kim,
Y. Itow,
K. Martens,
A. Mason,
M. Yamashita,
K. Miuchi,
Y. Takeuchi,
K. B. Lee,
M. K. Lee,
Y. Fukuda,
H. Ogawa
, et al. (7 additional authors not shown)
Abstract:
Various WIMP dark matter searches using the full data set of XMASS-I, a single-phase liquid xenon detector, are reported in this paper. Stable XMASS-I data taking accumulated a total live time of 1590.9 days between November 20, 2013 and February 1, 2019 with an analysis threshold of ${\rm 1.0\,keV_{ee}}$. In the latter half of data taking a lower analysis threshold of ${\rm 0.5\,keV_{ee}}$ was al…
▽ More
Various WIMP dark matter searches using the full data set of XMASS-I, a single-phase liquid xenon detector, are reported in this paper. Stable XMASS-I data taking accumulated a total live time of 1590.9 days between November 20, 2013 and February 1, 2019 with an analysis threshold of ${\rm 1.0\,keV_{ee}}$. In the latter half of data taking a lower analysis threshold of ${\rm 0.5\,keV_{ee}}$ was also available through a new low threshold trigger. Searching for a WIMP signal in the detector's 97~kg fiducial volume yielded a limit on the WIMP-nucleon scattering cross section of ${\rm 1.4\times 10^{-44}\, cm^{2}}$ for a ${\rm 60\,GeV/c^{2}}$ WIMP at the 90$\%$ confidence level. We also searched for WIMP induced annual modulation signatures in the detector's whole target volume, containing 832~kg of liquid xenon. For nuclear recoils of a ${\rm 8\,GeV/c^{2}}$ WIMP this analysis yielded a 90\% CL cross section limit of ${\rm 2.3\times 10^{-42}\, cm^{2}}$. At a WIMP mass of ${\rm 0.5\, GeV/c^{2}}$ the Migdal effect and Bremsstrahlung signatures were evaluated and lead to 90\% CL cross section limits of ${\rm 1.4\times 10^{-35}\, cm^{2}}$ and ${\rm 1.1\times 10^{-33}\, cm^{2}}$ respectively.
△ Less
Submitted 1 September, 2023; v1 submitted 11 November, 2022;
originally announced November 2022.