-
Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$
Authors:
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere,
A. Brueggemann
, et al. (645 additional authors not shown)
Abstract:
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be…
▽ More
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Ultralow thermal conductance across the [FePt/h-BN/FePt] interface
Authors:
chengchao Xu,
Enbo Zhang,
Bo-Yuan Yang,
B. S. D. Ch. S. Varaprasad,
David E. Laughlin,
Jian-Gang,
Zhu
Abstract:
Heat transfer in nanocomposite materials has attracted great interest for various applications. Multilayer structures provide an important platform to study interfacial thermal transport and to engineer materials with ultralow thermal conductivity. Here we report on the fabrication and thermal characterization of [h-BN/$L1_0$-FePt]xN multilayers, where hexagonal boron nitride (h-BN) nanosheets (2.…
▽ More
Heat transfer in nanocomposite materials has attracted great interest for various applications. Multilayer structures provide an important platform to study interfacial thermal transport and to engineer materials with ultralow thermal conductivity. Here we report on the fabrication and thermal characterization of [h-BN/$L1_0$-FePt]xN multilayers, where hexagonal boron nitride (h-BN) nanosheets (2.5 nm thick) and $L1_0$-FePt layers (6.5 nm thick) alternate periodically. Differential three-omega($3ω$) measurements reveal an ultralow effective thermal conductivity of $ 0.60 \pm 0.05 W \cdot m^{-1}K^{-1}$ across the multilayer films, and a low thermal boundary conductance (TBC) of $ 67.9 \pm 6.6 MW \cdot m^{-2}K^{-1}$ for the [FePt/h-BN(2.5nm)/FePt] interface at room temperature. We attribute the ultralow thermal conductivity to the weak van der Waals bonding at h-BN/FePt interfaces, which dominates the thermal resistance of the multilayer structure. These findings provide insights into the thermal transport in 2D-material/metal multilayer nanostructures and suggest the [h-BN/FePt] superlattice as a promising material for nanoscale thermal barrier coating. Furthermore, the obtained TBC lays the foundation for analyzing heat transfer in FePt-(h-BN) nanogranular films, a promising magnetic recording media which can potentially provide high thermal gradient for heat-assisted magnetic recording (HAMR). This work advances the understanding of thermal transport in 2D-material/metal nanocomposites and demonstrates interface engineering as an effective approach to achieve materials with ultralow thermal conductivity.
△ Less
Submitted 18 June, 2024;
originally announced June 2024.
-
Enabling Large-Scale and High-Precision Fluid Simulations on Near-Term Quantum Computers
Authors:
Zhao-Yun Chen,
Teng-Yang Ma,
Chuang-Chao Ye,
Liang Xu,
Ming-Yang Tan,
Xi-Ning Zhuang,
Xiao-Fan Xu,
Yun-Jie Wang,
Tai-** Sun,
Yong Chen,
Lei Du,
Liang-Liang Guo,
Hai-Feng Zhang,
Hao-Ran Tao,
Tian-Le Wang,
Xiao-Yan Yang,
Ze-An Zhao,
Peng Wang,
Sheng Zhang,
Chi Zhang,
Ren-Ze Zhao,
Zhi-Long Jia,
Wei-Cheng Kong,
Meng-Han Dou,
Jun-Chao Wang
, et al. (7 additional authors not shown)
Abstract:
Quantum computational fluid dynamics (QCFD) offers a promising alternative to classical computational fluid dynamics (CFD) by leveraging quantum algorithms for higher efficiency. This paper introduces a comprehensive QCFD method, including an iterative method "Iterative-QLS" that suppresses error in quantum linear solver, and a subspace method to scale the solution to a larger size. We implement o…
▽ More
Quantum computational fluid dynamics (QCFD) offers a promising alternative to classical computational fluid dynamics (CFD) by leveraging quantum algorithms for higher efficiency. This paper introduces a comprehensive QCFD method, including an iterative method "Iterative-QLS" that suppresses error in quantum linear solver, and a subspace method to scale the solution to a larger size. We implement our method on a superconducting quantum computer, demonstrating successful simulations of steady Poiseuille flow and unsteady acoustic wave propagation. The Poiseuille flow simulation achieved a relative error of less than $0.2\%$, and the unsteady acoustic wave simulation solved a 5043-dimensional matrix. We emphasize the utilization of the quantum-classical hybrid approach in applications of near-term quantum computers. By adapting to quantum hardware constraints and offering scalable solutions for large-scale CFD problems, our method paves the way for practical applications of near-term quantum computers in computational science.
△ Less
Submitted 19 June, 2024; v1 submitted 10 June, 2024;
originally announced June 2024.
-
QCDGE database, Quantum Chemistry Database with Ground- and Excited-state Properties of 450 Kilo Molecules
Authors:
Yifei Zhu,
Mengge Li,
Chao Xu,
Zhenggang Lan
Abstract:
Due to rapid advancements in deep learning techniques, the demand for large-volume high-quality databases grows significantly in chemical research. We developed a quantum-chemistry database that includes 443,106 small organic molecules with sizes up to 10 heavy atoms including carbon (C), nitrogen (N), oxygen (O), and fluorine (F). Ground-state geometry optimizations and frequency calculations of…
▽ More
Due to rapid advancements in deep learning techniques, the demand for large-volume high-quality databases grows significantly in chemical research. We developed a quantum-chemistry database that includes 443,106 small organic molecules with sizes up to 10 heavy atoms including carbon (C), nitrogen (N), oxygen (O), and fluorine (F). Ground-state geometry optimizations and frequency calculations of all compounds were performed at the B3LYP/6-31G* level with the BJD3 dispersion correction, while the excited-state single-point calculations were conducted at the $ω$B97X-D/6-31G* level. Totally twenty seven molecular properties, such as geometric, thermodynamic, electronic and energetic properties, were gathered from these calculations. Meanwhile, we also established a comprehensive protocol for the construction of a high-volume quantum-chemistry database. Our QCDGE (Quantum Chemistry Database with Ground- and Excited-State Properties) database contains a substantial volume of data, exhibits high chemical diversity, and most importantly includes excited-state information. This database, along with its construction protocol, is expected to have a significant impact on the broad applications of machine learning studies across different fields of chemistry, especially in the area of excited-state research.
△ Less
Submitted 4 June, 2024;
originally announced June 2024.
-
Onset of global instability in a premixed annular V-flame
Authors:
Chuhan Wang,
Christopher M. Douglas,
Yu Guan,
Chunxiao Xu,
Lutz Lesshafft
Abstract:
We investigate self-excited axisymmetric oscillations of a lean premixed methane--air V-flame in a laminar annular jet. The flame is anchored near the rim of the centrebody, forming an inverted cone, while the strongest vorticity is concentrated along the outer shear layer of the annular jet. Consequently, the reaction and vorticity dynamics are largely separated, except where they coalesce near t…
▽ More
We investigate self-excited axisymmetric oscillations of a lean premixed methane--air V-flame in a laminar annular jet. The flame is anchored near the rim of the centrebody, forming an inverted cone, while the strongest vorticity is concentrated along the outer shear layer of the annular jet. Consequently, the reaction and vorticity dynamics are largely separated, except where they coalesce near the flame tip. The global eigenmodes corresponding to the linearised reacting flow equations around the steady base state are computed in an axisymmetric setting. We identify an arc branch of eigenmodes exhibiting strong oscillations at the flame tip. The associated eigenvalues are robust with respect to domain truncation and numerical discretisation, and they become destabilised as the Reynolds number increases. The frequency of the leading eigenmode is found to correspond to the Lagrangian disturbance advection time from the nozzle outlet to the flame tip. This linear result suggests a non-local feedback mechanism consistent with the scenario of `intrinsic thermoacoustic instability'. Nonlinear time-resolved simulation further reveals notable hysteresis phenomena in the subcritical regime prior to instability. Hence, even when the flame is linearly stable, perturbations of sufficient amplitude can trigger limit-cycle oscillations and higher-dimensional dynamics sustained by nonlinear feedback. Notably, linear analysis of the subcritical time-averaged limit-cycle state yields eigenvalues that do not match the nonlinear periodic oscillation frequencies, emphasising the essential role of nonlinear harmonic interactions in the system dynamics.
△ Less
Submitted 26 April, 2024;
originally announced April 2024.
-
Comparison of h-BN and graphene layers as grain boundary materials for granular FePt-$\text{L}1_0$ thin films
Authors:
B. S. D. Ch. S. Varaprasad,
Chengchao Xu,
Brandon Reese,
David E. Laughlin,
Jian-Gang,
Zhu
Abstract:
Granular $\text{L}1_0$-FePt thin films with small columnar grains are essential for heat-assisted magnetic recording media. While hexagonal boron nitride(h-BN) has proven effective for promoting columnar FePt grains, we explored multilayer graphene as an alternative grain boundary material leveraging its structural similarity to h-BN. The FePt granular thin films with carbon-based grain boundary m…
▽ More
Granular $\text{L}1_0$-FePt thin films with small columnar grains are essential for heat-assisted magnetic recording media. While hexagonal boron nitride(h-BN) has proven effective for promoting columnar FePt grains, we explored multilayer graphene as an alternative grain boundary material leveraging its structural similarity to h-BN. The FePt granular thin films with carbon-based grain boundary materials(GBMs) were deposited by cosputtering on Si/SiO2 substrates with substrate bias at 650°C. The RF bias and high temperature facilitated formation of interlinked graphene nanoribbons wrap** around FePt grains, yielding 7.5 nm diameter, 8 nm height grains with an order parameter of 0.78 and a perpendicular coercivity of 40 kOe. However, the formation of graphene nanoribbons could not effectively promote columnar structures, likely due to co-existing amorphous carbon in grain boundaries. Optimizing deposition to improve graphene grain boundary quality is necessary to realize this 2D material's potential for achieving desirable microstructures for HAMR media.
△ Less
Submitted 22 April, 2024;
originally announced April 2024.
-
Prolate spheroids settling in a quiescent fluid: clustering, microstructures and collisions
Authors:
Xinyu Jiang,
Chunxiao Xu,
Lihao Zhao
Abstract:
In the present study, we investigate the settling of prolate spheroidal particles in a quiescent fluid by means of particle-resolved direct numerical simulations. By varying the particle volume fraction (phi) from 0.1% to 10%, we observe a non-monotonic variation of particle mean settling velocity with a local maximum at phi=1%. To explain this finding, we examine the spatial distribution and orie…
▽ More
In the present study, we investigate the settling of prolate spheroidal particles in a quiescent fluid by means of particle-resolved direct numerical simulations. By varying the particle volume fraction (phi) from 0.1% to 10%, we observe a non-monotonic variation of particle mean settling velocity with a local maximum at phi=1%. To explain this finding, we examine the spatial distribution and orientation of dispersed particles. The particle-pairs statistics show the tendency of particles to form column-like microsturctures, revealing the attraction and entrapment of paritcles in wake regions. This effect results in the formation of large-scale particle clusters at intermediate particle volume fractions. The most intense particle clustering at phi=1%, quantified by the standard deviation of Voronoi volume, induces a swarm effect and substantially enhances the particle settling rate by around 25%. While, in the very dilute suspension at phi=0.1%, the particle clustering is attenuated due to the long inter-particle distance. In dense suspensions, however, the crowded particle arrangement disrupts particle wakes, breaks particle microstructures and inhibits the particle clustering. Consequently, hindrance effect dominates and reduces the settling speed. In contrast to particle spatial distribution, the particle orientation plays a less important role in the mean settling velocity. At last, we examine the collision rate of settling particles by computing the collision kernel. As phi increases, the collision kernel decreases monotonically, which is primarily attributed to the decrease of radial distribution function. However, the radial relative velocity is almost a constant with the change of phi. These results reveal the importance of hydrodynamic interactions, including the wake-flow-induced attractions and the lubrication effect, in collisions among settling spheroids.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
A newly developed multi-kilo-channel high-speed and precision waveform digitization system for neutrino experiments
Authors:
H. Yang,
T. Xue,
L. Jiang,
C. Xu,
Q. Pan,
B. Liang,
G. Gong,
B. Xu,
Z. Wang,
S. Chen,
Y. Liu,
J. Li
Abstract:
The **** Neutrino Experiment(JNE), conducted within the China **** Underground Laboratory, aims to detect and analyze of solar neutrinos, geo-neutrinos, and supernova neutrinos. A one-ton prototype will soon be in commision with an upgrade from 30 channels to 60 channels, which will increase the data bandwidth by one to two orders of magnitude and exceed the capacity of the current CAEN DAQ…
▽ More
The **** Neutrino Experiment(JNE), conducted within the China **** Underground Laboratory, aims to detect and analyze of solar neutrinos, geo-neutrinos, and supernova neutrinos. A one-ton prototype will soon be in commision with an upgrade from 30 channels to 60 channels, which will increase the data bandwidth by one to two orders of magnitude and exceed the capacity of the current CAEN DAQ system. Additionally, enhancing the performance and flexibility of JNE DAQ system is crucial. This paper presents the design of a new Tsinghua DAQ system for the JNE and its performance and stability. The new Tsinghua DAQ(THDAQ) system for JNE is based on the cPCI protocol and demonstrates powerful performance improvements: ADC ENOB of the THDAQ system approximately exceeds 9.8-bit, marking a 14% improvement over the CAEN DAQ system; The maximum clock deviation within a single chassis is 85.6 ps, satisfying sub-nanosecond synchronization criteria; Each DAQ board features two QSFP+ optical ports with 82.5Gbps transmission capability, while the PCIe board supports a transmission rate of 100.2 Gbps. In addition, comparative experiments between the two systems were also tested in detail. The analysis results of waveform and charge spectrum prove the high stability of the THDAQ system. This provides a foundation for the 60-channel and 4000-channel DAQ systems.
△ Less
Submitted 16 April, 2024;
originally announced April 2024.
-
PiRD: Physics-informed Residual Diffusion for Flow Field Reconstruction
Authors:
Siming Shan,
Pengkai Wang,
Song Chen,
Jiaxu Liu,
Chao Xu,
Shengze Cai
Abstract:
The use of machine learning in fluid dynamics is becoming more common to expedite the computation when solving forward and inverse problems of partial differential equations. Yet, a notable challenge with existing convolutional neural network (CNN)-based methods for data fidelity enhancement is their reliance on specific low-fidelity data patterns and distributions during the training phase. In ad…
▽ More
The use of machine learning in fluid dynamics is becoming more common to expedite the computation when solving forward and inverse problems of partial differential equations. Yet, a notable challenge with existing convolutional neural network (CNN)-based methods for data fidelity enhancement is their reliance on specific low-fidelity data patterns and distributions during the training phase. In addition, the CNN-based method essentially treats the flow reconstruction task as a computer vision task that prioritizes the element-wise precision which lacks a physical and mathematical explanation. This dependence can dramatically affect the models' effectiveness in real-world scenarios, especially when the low-fidelity input deviates from the training data or contains noise not accounted for during training. The introduction of diffusion models in this context shows promise for improving performance and generalizability. Unlike direct map** from a specific low-fidelity to a high-fidelity distribution, diffusion models learn to transition from any low-fidelity distribution towards a high-fidelity one. Our proposed model - Physics-informed Residual Diffusion, demonstrates the capability to elevate the quality of data from both standard low-fidelity inputs, to low-fidelity inputs with injected Gaussian noise, and randomly collected samples. By integrating physics-based insights into the objective function, it further refines the accuracy and the fidelity of the inferred high-quality data. Experimental results have shown that our approach can effectively reconstruct high-quality outcomes for two-dimensional turbulent flows from a range of low-fidelity input conditions without requiring retraining.
△ Less
Submitted 9 May, 2024; v1 submitted 12 April, 2024;
originally announced April 2024.
-
Reconstructing the evolution history of networked complex systems
Authors:
Junya Wang,
Yi-Jiao Zhang,
Cong Xu,
Jiaze Li,
Jiachen Sun,
Jiarong Xie,
Ling Feng,
Tianshou Zhou,
Yanqing Hu
Abstract:
The evolution processes of complex systems carry key information in the systems' functional properties. Applying machine learning algorithms, we demonstrate that the historical formation process of various networked complex systems can be extracted, including protein-protein interaction, ecology, and social network systems. The recovered evolution process has demonstrations of immense scientific v…
▽ More
The evolution processes of complex systems carry key information in the systems' functional properties. Applying machine learning algorithms, we demonstrate that the historical formation process of various networked complex systems can be extracted, including protein-protein interaction, ecology, and social network systems. The recovered evolution process has demonstrations of immense scientific values, such as interpreting the evolution of protein-protein interaction network, facilitating structure prediction, and particularly revealing the key co-evolution features of network structures such as preferential attachment, community structure, local clustering, degree-degree correlation that could not be explained collectively by previous theories. Intriguingly, we discover that for large networks, if the performance of the machine learning model is slightly better than a random guess on the pairwise order of links, reliable restoration of the overall network formation process can be achieved. This suggests that evolution history restoration is generally highly feasible on empirical networks.
△ Less
Submitted 22 March, 2024;
originally announced March 2024.
-
Holistic numerical simulation of a quenching process on a real-size multifilamentary superconducting coil
Authors:
Cun Xue,
Han-Xi Ren,
Peng Jia,
Qing-Yu Wang,
Wei Liu,
Xian-** Ou,
Liang-Ting Sun,
Alejandro V Silhanek
Abstract:
Superconductors play a crucial role in the advancement of high-field electromagnets. Unfortunately, their performance can be compromised by thermomagnetic instabilities, wherein the interplay of rapid magnetic and slow heat diffusion can result in catastrophic flux jumps eventually leading to irreversible damage. This issue has long plagued high-$J_c$ Nb$_3$Sn wires at the core of high-field magne…
▽ More
Superconductors play a crucial role in the advancement of high-field electromagnets. Unfortunately, their performance can be compromised by thermomagnetic instabilities, wherein the interplay of rapid magnetic and slow heat diffusion can result in catastrophic flux jumps eventually leading to irreversible damage. This issue has long plagued high-$J_c$ Nb$_3$Sn wires at the core of high-field magnets. In this study, we introduce a groundbreaking large-scale GPU-optimized algorithm aimed at tackling the complex intertwined effects of electromagnetism, heating, and strain acting concomitantly during the quenching process of superconducting coils. We validate our model by conducting comparisons with magnetization measurements obtained from short multifilamentary Nb$_3$Sn wires and further experimental tests conducted on solenoid coils while subject to ram** transport currents. Furthermore, leveraging our developed numerical algorithm, we unveil the dynamic propagation mechanisms underlying thermomagnetic instabilities (including flux jumps and quenches) within the coils. Remarkably, our findings reveal that the velocity field of flux jumps and quenches within the coil is correlated with the amount of Joule heating experienced by each wire over a specific time interval, rather than solely being dependent on instantaneous Joule heating or maximum temperature. These insights have the potential to pave the way for optimizing the design of next-generation superconducting magnets, thereby directly influencing a wide array of technologically relevant and multidisciplinary applications.
△ Less
Submitted 12 March, 2024;
originally announced March 2024.
-
Suppression of flux jumps in high-$J_c$ Nb$_3$Sn conductors by ferromagnetic layer
Authors:
Cun Xue,
Kai-Wei Cao,
Tian He,
Chong Wei,
Wei Liu,
Jun-Yi Ge
Abstract:
Flux jumps observed in high-$J_c$ Nb$_3$Sn conductors are urgent problems to construct high field superconducting magnets. The low-field instabilities usually reduce the current-carrying capability and thus cause the premature quench of Nb$_3$Sn coils at low magnetic field. In this paper, we explore suppressing the flux jumps by ferromagnetic (FM) layer. Firstly, we experimentally and theoreticall…
▽ More
Flux jumps observed in high-$J_c$ Nb$_3$Sn conductors are urgent problems to construct high field superconducting magnets. The low-field instabilities usually reduce the current-carrying capability and thus cause the premature quench of Nb$_3$Sn coils at low magnetic field. In this paper, we explore suppressing the flux jumps by ferromagnetic (FM) layer. Firstly, we experimentally and theoretically investigate the flux jumps of Nb$_3$Sn/FM hybrid wires exposed to a magnetic field loop with constant swee** rate. Comparing with bare Nb$_3$Sn and Nb$_3$Sn/Cu wires, we reveal two underlying mechanisms that the suppression of flux jumps is mainly attributed to the thermal effect of FM layer for the case of lower swee** rate, whereas both thermal and electromagnetic effects play a crucial role for the case of higher swee** rate. Furthermore, we explore the flux jumps of Nb$_3$Sn/FM hybrid wires exposed to AC magnetic fields with amplitude $B_{a0}$ and frequency $\rmω$. We build up the phase diagrams of flux jumps in the plane $\rmω$-$B_{a0}$ for bare Nb$_{3}$Sn wire, Nb$_{3}$Sn/Cu wire and Nb$_{3}$Sn/FM wire, respectively. We stress that the region of flux jumps of Nb$_{3}$Sn/FM wire is much smaller than the other two wires, which indicates that the Nb$_{3}$Sn/FM wire has significant advantage over merely increasing the heat capacity. The findings shed light on suppression of the flux jumps by utilizing FM materials, which is useful for develo** new type of high-$J_c$ Nb$_{3}$Sn conductors.
△ Less
Submitted 4 June, 2024; v1 submitted 10 March, 2024;
originally announced March 2024.
-
A Spectral Element Enrichment Wall-Model
Authors:
Steven R. Brill,
Pinaki Pal,
Muhsin Ameen,
Chao Xu,
Matthias Ihme
Abstract:
We develop an enrichment wall-model within the spectral element method (SEM) framework for large-eddy simulations of wall-bounded flows. The method augments the polynomial solution in the wall-adjacent elements with an analytical law-of-the-wall enrichment function representing the mean velocity near the wall. In the solution representation, this enrichment function captures the large gradients in…
▽ More
We develop an enrichment wall-model within the spectral element method (SEM) framework for large-eddy simulations of wall-bounded flows. The method augments the polynomial solution in the wall-adjacent elements with an analytical law-of-the-wall enrichment function representing the mean velocity near the wall. In the solution representation, this enrichment function captures the large gradients in the boundary layer, which allows the polynomial modes to represent the turbulent fluctuations. The enriched solution is able to resolve the shear stress at the wall without any modification to the no-slip wall boundary conditions. The performance of the SEM enrichment wall-modeling approach is assessed in turbulent channel flow LES for a range of Reynolds numbers. The results show that the proposed method improves solution accuracy on under-resolved near-wall grids as compared to the traditional shear stress wall-models.
△ Less
Submitted 7 July, 2024; v1 submitted 8 March, 2024;
originally announced March 2024.
-
Case studies on time-dependent Ginzburg-Landau simulations for superconducting applications
Authors:
Cun Xue,
Qing-Yu Wang,
Han-Xi Ren,
An He,
A. V. Silhanek
Abstract:
The macroscopic electromagnetic properties of type II superconductors are primarily influenced by the behavior of microscopic superconducting flux quantum units. Time-dependent Ginzburg-Landau (TDGL) equations provide an elegant and powerful tool for describing and examining both the statics and dynamics of these superconducting entities. They have been instrumental in replicating and elucidating…
▽ More
The macroscopic electromagnetic properties of type II superconductors are primarily influenced by the behavior of microscopic superconducting flux quantum units. Time-dependent Ginzburg-Landau (TDGL) equations provide an elegant and powerful tool for describing and examining both the statics and dynamics of these superconducting entities. They have been instrumental in replicating and elucidating numerous experimental results over the past decades.This paper provides a comprehensive overview of the progress in TDGL simulations, focusing on three key aspects of superconductor applications. The initial section delves into vortex rectification in superconductors described within the TDGL framework. We specifically highlight the superconducting diode effect achieved through asymmetric pinning landscapes and the reversible manipulation of vortex ratchets with dynamic pinning landscapes. The subsequent section reviews the achievements of TDGL simulations concerning the critical current density of superconductors, emphasizing the optimization of pinning sites, particularly vortex pinning and dynamics in polycrystalline Nb$_3$Sn with grain boundaries. The third part concentrates on numerical modeling of vortex penetration and dynamics in superconducting radio frequency (SRF) cavities, including a discussion of superconductor insulator superconductor multilayer structures. In the last section, we present key findings, insights, and perspectives derived from the discussed simulations.
△ Less
Submitted 4 June, 2024; v1 submitted 6 March, 2024;
originally announced March 2024.
-
More Sample-Efficient Tuning of Particle Accelerators with Bayesian Optimization and Prior Mean Models
Authors:
Tobias Boltz,
Jose L. Martinez,
Connie Xu,
Kathryn R. L. Baker,
Ryan Roussel,
Daniel Ratner,
Brahim Mustapha,
Auralee L. Edelen
Abstract:
Tuning particle accelerators is a challenging and time-consuming task, but can be automated and carried out efficiently through the use of suitable optimization algorithms. With successful applications at various facilities, Bayesian optimization using Gaussian process modeling has proven to be a particularly powerful tool to address these challenges in practice. One of its major benefits is that…
▽ More
Tuning particle accelerators is a challenging and time-consuming task, but can be automated and carried out efficiently through the use of suitable optimization algorithms. With successful applications at various facilities, Bayesian optimization using Gaussian process modeling has proven to be a particularly powerful tool to address these challenges in practice. One of its major benefits is that it allows incorporating prior information, such as knowledge about the shape of the objective function or predictions based on archived data, simulations or surrogate models, into the model. In this work, we propose the use of a neural network model as an efficient way to include prior knowledge about the objective function into the Bayesian optimization process to speed up convergence. We report results obtained in simulations and experiments using neural network priors to perform optimization of electron and heavy-ion accelerator facilities, specifically the Linac Coherent Light Source and the Argonne Tandem Linear Accelerator System. Finally, we evaluate how the accuracy of the prior mean predictions affect optimization performance.
△ Less
Submitted 23 May, 2024; v1 submitted 28 February, 2024;
originally announced March 2024.
-
Stacking faults enabled second harmonic generation in centrosymmetric van der Waals RhI3
Authors:
Yue Liu,
Wen He,
Bingze Wu,
Fengyuan Xuan,
Yuqiang Fang,
Zhengbo Zhong,
Jierui Fu,
Jiapeng Wang,
Zhipeng Li,
**zhong Wang,
Mingguang Yao,
Fuqiang Huang,
Liang Zhen,
Yang Li,
Chengyan Xu
Abstract:
Second harmonic generation (SHG) in van der Waals (vdWs) materials has garnered significant attention due to its potential for integrated nonlinear optical and optoelectronic applications. Stacking faults in vdWs materials, a typical kind of planar defect, can introduce a new degree of freedom to modulate the crystal symmetry and resultant SHG response, however, the physical origin and tunability…
▽ More
Second harmonic generation (SHG) in van der Waals (vdWs) materials has garnered significant attention due to its potential for integrated nonlinear optical and optoelectronic applications. Stacking faults in vdWs materials, a typical kind of planar defect, can introduce a new degree of freedom to modulate the crystal symmetry and resultant SHG response, however, the physical origin and tunability of stacking-fault-governed SHG in vdWs materials remain unclear. Here, taking the intrinsically centrosymmetric vdWs RhI3 as an example, we theoretically reveal the origin of stacking-fault-governed SHG response, where the SHG response comes from the energetically favorable AC- Cstacking fault of which the electrical transitions along the high symmetry paths Gamma-M and Gamma-K in the Brillion zone play the dominant role at 810 nm. Such stacking-fault-governed SHG response is further confirmed via structural characterizations and SHG measurements. Furthermore, by applying hydrostatic pressure on RhI3, the correlation between structural evolution and SHG response is revealed with SHG enhancement up to 6.9 times, where the decreased electronic transition energies and huger momentum matrix elements due to the stronger interlayer interactions upon compression magnify the SHG susceptibility. This study develops a promising foundation based on strategically designed stacking faults for pioneering new avenues in nonlinear nano-optics.
△ Less
Submitted 29 February, 2024;
originally announced February 2024.
-
Spectral Switches of Light in Curved Space
Authors:
Suting Ju,
Chenni Xu,
Li-Gang Wang
Abstract:
Acting as analog models of curved spacetime, surfaces of revolution employed for exploring novel optical effects are followed with great interest nowadays to enhance our comprehension of the universe. It is of general interest to understand the spectral effect of light propagating through a long distance in the universe. Here, we address the issue on how curved space affects the phenomenon of spec…
▽ More
Acting as analog models of curved spacetime, surfaces of revolution employed for exploring novel optical effects are followed with great interest nowadays to enhance our comprehension of the universe. It is of general interest to understand the spectral effect of light propagating through a long distance in the universe. Here, we address the issue on how curved space affects the phenomenon of spectral switches, a spectral sudden change during propagation caused by a finite size of a light source. By using the point spread function of curved space under the paraxial approximation, the expression of the on-axis output spectrum is derived and calculated numerically. A theoretical way to find on-axis spectral switches is also derived, which interprets the effect of spatial curvature of surfaces on spectral switches as a modification of effective Fresnel number. We find that the spectral switches on surfaces with positive Gaussian curvature are closer to the source, compared with the flat surface case, while the effect is opposite on surfaces with negative Gaussian curvature. We also find that the spectral switches farther away from the light source are more sensitive to the change in Gaussian curvature. This work deepens our understanding of the properties of fully and partially coherent lights propagating on two-dimensional curved space.
△ Less
Submitted 19 January, 2024;
originally announced January 2024.
-
Cheetah: Bridging the Gap Between Machine Learning and Particle Accelerator Physics with High-Speed, Differentiable Simulations
Authors:
Jan Kaiser,
Chenran Xu,
Annika Eichler,
Andrea Santamaria Garcia
Abstract:
Machine learning has emerged as a powerful solution to the modern challenges in accelerator physics. However, the limited availability of beam time, the computational cost of simulations, and the high-dimensionality of optimisation problems pose significant challenges in generating the required data for training state-of-the-art machine learning models. In this work, we introduce Cheetah, a PyTorc…
▽ More
Machine learning has emerged as a powerful solution to the modern challenges in accelerator physics. However, the limited availability of beam time, the computational cost of simulations, and the high-dimensionality of optimisation problems pose significant challenges in generating the required data for training state-of-the-art machine learning models. In this work, we introduce Cheetah, a PyTorch-based high-speed differentiable linear-beam dynamics code. Cheetah enables the fast collection of large data sets by reducing computation times by multiple orders of magnitude and facilitates efficient gradient-based optimisation for accelerator tuning and system identification. This positions Cheetah as a user-friendly, readily extensible tool that integrates seamlessly with widely adopted machine learning tools. We showcase the utility of Cheetah through five examples, including reinforcement learning training, gradient-based beamline tuning, gradient-based system identification, physics-informed Bayesian optimisation priors, and modular neural network surrogate modelling of space charge effects. The use of such a high-speed differentiable simulation code will simplify the development of machine learning-based methods for particle accelerators and fast-track their integration into everyday operations of accelerator facilities.
△ Less
Submitted 11 January, 2024;
originally announced January 2024.
-
Transport of inertial spherical particles in compressible turbulent boundary layers
Authors:
Ming Yu,
Lihao Zhao,
Xianxu Yuan,
Chunxiao Xu
Abstract:
In the present study, we perform direct numerical simulations of compressible turbulent boundary layers at the free stream Mach number of 2 ~ 6 laden with dilute phase of spherical particles to investigate the Mach number effects on particle transport and dynamics. Most of the phenomena observed and well-recognized for inertia particles in incompressible wall-bounded turbulent flows, such as the n…
▽ More
In the present study, we perform direct numerical simulations of compressible turbulent boundary layers at the free stream Mach number of 2 ~ 6 laden with dilute phase of spherical particles to investigate the Mach number effects on particle transport and dynamics. Most of the phenomena observed and well-recognized for inertia particles in incompressible wall-bounded turbulent flows, such as the near-wall preferential accumulation and clustering beneath the low-speed streaks, the flatter mean velocity profiles and the trend variation of the particle velocity fluctuations, are identified in the compressible turbulent boundary layer as well. However, we find that the compressibility effects are significant for large inertia particles. As the Mach number increases, the near-wall accumulation and the small-scale clustering are alleviated, which is probably caused by the variation of the fluid density and viscosity that are crucial to particle dynamics. This can be affected by the fact that the forces acting on the particles with the viscous Stokes number greater than 500 are modulated by the comparatively high particle Mach numbers in the near-wall region. This is also the reason for the abatement of the streamwise particle velocity fluctuation intensities with the Mach numbers.
△ Less
Submitted 2 January, 2024;
originally announced January 2024.
-
Beyond PID Controllers: PPO with Neuralized PID Policy for Proton Beam Intensity Control in Mu2e
Authors:
Chenwei Xu,
Jerry Yao-Chieh Hu,
Aakaash Narayanan,
Mattson Thieme,
Vladimir Nagaslaev,
Mark Austin,
Jeremy Arnold,
Jose Berlioz,
Pierrick Hanlet,
Aisha Ibrahim,
Dennis Nicklaus,
Jovan Mitrevski,
Jason Michael St. John,
Gauri Pradhan,
Andrea Saewert,
Kiyomi Seiya,
Brian Schupbach,
Randy Thurman-Keup,
Nhan Tran,
Rui Shi,
Seda Ogrenci,
Alexis Maya-Isabelle Shu**,
Kyle Hazelwood,
Han Liu
Abstract:
We introduce a novel Proximal Policy Optimization (PPO) algorithm aimed at addressing the challenge of maintaining a uniform proton beam intensity delivery in the Muon to Electron Conversion Experiment (Mu2e) at Fermi National Accelerator Laboratory (Fermilab). Our primary objective is to regulate the spill process to ensure a consistent intensity profile, with the ultimate goal of creating an aut…
▽ More
We introduce a novel Proximal Policy Optimization (PPO) algorithm aimed at addressing the challenge of maintaining a uniform proton beam intensity delivery in the Muon to Electron Conversion Experiment (Mu2e) at Fermi National Accelerator Laboratory (Fermilab). Our primary objective is to regulate the spill process to ensure a consistent intensity profile, with the ultimate goal of creating an automated controller capable of providing real-time feedback and calibration of the Spill Regulation System (SRS) parameters on a millisecond timescale. We treat the Mu2e accelerator system as a Markov Decision Process suitable for Reinforcement Learning (RL), utilizing PPO to reduce bias and enhance training stability. A key innovation in our approach is the integration of a neuralized Proportional-Integral-Derivative (PID) controller into the policy function, resulting in a significant improvement in the Spill Duty Factor (SDF) by 13.6%, surpassing the performance of the current PID controller baseline by an additional 1.6%. This paper presents the preliminary offline results based on a differentiable simulator of the Mu2e accelerator. It paves the groundwork for real-time implementations and applications, representing a crucial step towards automated proton beam intensity control for the Mu2e experiment.
△ Less
Submitted 28 December, 2023;
originally announced December 2023.
-
Bayesian Optimization Algorithms for Accelerator Physics
Authors:
Ryan Roussel,
Auralee L. Edelen,
Tobias Boltz,
Dylan Kennedy,
Zhe Zhang,
Fuhao Ji,
Xiaobiao Huang,
Daniel Ratner,
Andrea Santamaria Garcia,
Chenran Xu,
Jan Kaiser,
Angel Ferran Pousa,
Annika Eichler,
Jannis O. Lubsen,
Natalie M. Isenberg,
Yuan Gao,
Nikita Kuklev,
Jose Martinez,
Brahim Mustapha,
Verena Kain,
Weijian Lin,
Simone Maria Liuzzo,
Jason St. John,
Matthew J. V. Streeter,
Remi Lehe
, et al. (1 additional authors not shown)
Abstract:
Accelerator physics relies on numerical algorithms to solve optimization problems in online accelerator control and tasks such as experimental design and model calibration in simulations. The effectiveness of optimization algorithms in discovering ideal solutions for complex challenges with limited resources often determines the problem complexity these methods can address. The accelerator physics…
▽ More
Accelerator physics relies on numerical algorithms to solve optimization problems in online accelerator control and tasks such as experimental design and model calibration in simulations. The effectiveness of optimization algorithms in discovering ideal solutions for complex challenges with limited resources often determines the problem complexity these methods can address. The accelerator physics community has recognized the advantages of Bayesian optimization algorithms, which leverage statistical surrogate models of objective functions to effectively address complex optimization challenges, especially in the presence of noise during accelerator operation and in resource-intensive physics simulations. In this review article, we offer a conceptual overview of applying Bayesian optimization techniques towards solving optimization problems in accelerator physics. We begin by providing a straightforward explanation of the essential components that make up Bayesian optimization techniques. We then give an overview of current and previous work applying and modifying these techniques to solve accelerator physics challenges. Finally, we explore practical implementation strategies for Bayesian optimization algorithms to maximize their performance, enabling users to effectively address complex optimization challenges in real-time beam control and accelerator design.
△ Less
Submitted 5 April, 2024; v1 submitted 9 December, 2023;
originally announced December 2023.
-
Light Field Imaging in the Restrictive Object Space based on Flexible Angular Plane
Authors:
** Zhou,
Nuo Chen,
Yuda Xu,
Chengcai Xu
Abstract:
In some applications, the object space of light field imaging system is restrictive, such as industrial and medical endoscopes. If the traditional light field imaging system is used in the restrictive object space (ROS) directly but without any specific considerations, the ROS will lead to severe microlens image distortions and then affects light field decoding, calibration and 3D reconstruction.…
▽ More
In some applications, the object space of light field imaging system is restrictive, such as industrial and medical endoscopes. If the traditional light field imaging system is used in the restrictive object space (ROS) directly but without any specific considerations, the ROS will lead to severe microlens image distortions and then affects light field decoding, calibration and 3D reconstruction. The light field imaging in restrictive object space (ROS-LF) is complicated but significant. In this paper, we first deduce that the reason of the microlens image deviation is the position variation of the angular plane, then we propose the flexible angular plane for ROS-LF, while in the traditional light field the angular plane always coincides with the main lens plane. Subsequently, we propose the microlens image non-distortion principle for ROS-LF and introduce the ROS-LF imaging principle. We demonstrate that the difference is an aperture constant term between the ROS-LF and traditional light field imaging models. At last, we design a ROS-LF simulated system and calibrate it to verify principles proposed in this paper.
△ Less
Submitted 4 December, 2023;
originally announced December 2023.
-
Liquid-shaped microlens for scalable production of ultrahigh-resolution OCT microendoscope
Authors:
Chao Xu,
Xin Guan,
Syeda Aimen Abbasi,
Neng Xia,
To Ngai,
Li Zhang,
Ho-Pui Ho,
Sze Hang Calvin Ng,
Wu Yuan
Abstract:
Endoscopic optical coherence tomography (OCT) is a valuable tool for providing diagnostic images of internal organs and guiding interventions in real time. Miniaturized OCT endoscopes are essential for imaging small and convoluted luminal organs while minimizing invasiveness. However, current methods for fabricating miniature fiber probes have limited ability to correct optical aberrations, leadin…
▽ More
Endoscopic optical coherence tomography (OCT) is a valuable tool for providing diagnostic images of internal organs and guiding interventions in real time. Miniaturized OCT endoscopes are essential for imaging small and convoluted luminal organs while minimizing invasiveness. However, current methods for fabricating miniature fiber probes have limited ability to correct optical aberrations, leading to suboptimal imaging performance. In this study, we introduce a new paradigm of liquid sha** technique for the rapid and scalable fabrication of ultrathin and high-performance OCT microendoscopes suitable for minimally invasive clinical applications. This technique enables the flexible customization of freeform microlenses with sub-nanometer optical surface roughness by regulating the minimum energy state of curable optical liquid on a wettability-modified substrate and precisely controlling the liquid volume and physical boundary on a substrate. Using this technique, we simultaneously fabricated 800-nm OCT microendoscopes with a diameter of approximately 0.6 mm and evaluated their ultrahigh-resolution imaging performance in the esophagus of rats and the aorta and brain of mice.
△ Less
Submitted 27 November, 2023;
originally announced November 2023.
-
Intrinsic defect engineering of CVD grown monolayer MoS$_2$ for tuneable functional nanodevices
Authors:
Irfan H. Abidi,
Sindhu Priya Giridhar,
Jonathan O. Tollerud,
Jake Limb,
Aishani Mazumder,
Edwin LH Mayes,
Billy J. Murdoch,
Chenglong Xu,
Ankit Bhoriya,
Abhishek Ranjan,
Taimur Ahmed,
Yongxiang Li,
Jeffrey A. Davis,
Cameron L. Bentley,
Salvy P. Russo,
Enrico Della Gaspera,
Sumeet Walia
Abstract:
Defects in atomically thin materials can drive new functionalities and expand applications to multifunctional systems that are monolithically integrated. An ability to control formation of defects during the synthesis process is an important capability to create practical deployment opportunities. Molybdenum disulfide (MoS$_2$), a two-dimensional (2D) semiconducting material harbors intrinsic defe…
▽ More
Defects in atomically thin materials can drive new functionalities and expand applications to multifunctional systems that are monolithically integrated. An ability to control formation of defects during the synthesis process is an important capability to create practical deployment opportunities. Molybdenum disulfide (MoS$_2$), a two-dimensional (2D) semiconducting material harbors intrinsic defects that can be harnessed to achieve tuneable electronic, optoelectronic, and electrochemical devices. However, achieving precise control over defect formation within monolayer MoS$_2$, while maintaining the structural integrity of the crystals remains a notable challenge. Here, we present a one-step, in-situ defect engineering approach for monolayer MoS$_2$ using a pressure dependent chemical vapour deposition (CVD) process. Monolayer MoS$_2$ grown in low-pressure CVD conditions (LP-MoS$_2$) produces sulfur vacancy (Vs) induced defect rich crystals primarily attributed to the kinetics of the growth conditions. Conversely, atmospheric pressure CVD grown MoS$_2$ (AP-MoS$_2$) passivates these Vs defects with oxygen. This disparity in defect profiles profoundly impacts crucial functional properties and device performance. AP-MoS$_2$ shows a drastically enhanced photoluminescence, which is significantly quenched in LP-MoS$_2$ attributed to in-gap electron donor states induced by the Vs defects. However, the n-do** induced by the Vs defects in LP-MoS$_2$ generates enhanced photoresponsivity and detectivity in our fabricated photodetectors compared to the AP-MoS$_2$ based devices. Defect-rich LP-MoS$_2$ outperforms AP-MoS$_2$ as channel layers of field-effect transistors (FETs), as well as electrocatalytic material for hydrogen evolution reaction (HER). This work presents a single-step CVD approach for in-situ defect engineering in monolayer MoS$_2$ and presents a pathway to control defects in other monolayer material systems.
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
Drift Observations and Mitigation in LCLS-II RF
Authors:
L. Doolittle,
S. D. Murthy,
A. Benwell,
D. Chabot,
J. Chen,
B. Hong,
S. Hoobler,
J. Nelson,
C. Xu
Abstract:
The LCLS-II RF system physically spans ~700m and has strict requirements -- on the order of 20 fs -- on the phase stability of the accelerating RF fields in its SRF linac. While each LLRF rack is crudely temperature-stabilized, the weather inside the service building as a whole is usually compared to a tin shack in the California sun. A phase-averaging reference line is the primary system deployed…
▽ More
The LCLS-II RF system physically spans ~700m and has strict requirements -- on the order of 20 fs -- on the phase stability of the accelerating RF fields in its SRF linac. While each LLRF rack is crudely temperature-stabilized, the weather inside the service building as a whole is usually compared to a tin shack in the California sun. A phase-averaging reference line is the primary system deployed in support of the phase stability goals. There are other, secondary subsystems (SEL phase offset, and determination of cavity detuning) that are also sensitive to RF phase drift. We present measurements of phase shifts observed in the overall RF system, and how diagnostics are able to sense and correct for them during beam operations.
△ Less
Submitted 14 November, 2023; v1 submitted 25 October, 2023;
originally announced October 2023.
-
Atomic-scale investigation of $γ$-Ga$_2$O$_3$ deposited on MgAl$_2$O$_4$ and its relationship with $β$-Ga$_2$O$_3$
Authors:
J. Tang,
K. Jiang,
C. Xu,
M. J. Cabral,
K. Xiao,
L. M. Porter,
R. F. Davis
Abstract:
Nominally phase-pure $γ$-$Ga_2O_3$ was deposited on (100) $MgAl_2O_4$ within a narrow temperature window centered at $\sim$470 $^{\circ}$C using metal-organic chemical vapor deposition (MOCVD). The film deposited at 440 $^{\circ}$C exhibited either poor crystallization or an amorphous structure; the film grown at 500 $^{\circ}$C contained both $β$-$Ga_2O_3$ and $γ$-$Ga_2O_3$. A nominally phase-pur…
▽ More
Nominally phase-pure $γ$-$Ga_2O_3$ was deposited on (100) $MgAl_2O_4$ within a narrow temperature window centered at $\sim$470 $^{\circ}$C using metal-organic chemical vapor deposition (MOCVD). The film deposited at 440 $^{\circ}$C exhibited either poor crystallization or an amorphous structure; the film grown at 500 $^{\circ}$C contained both $β$-$Ga_2O_3$ and $γ$-$Ga_2O_3$. A nominally phase-pure $β$-$Ga_2O_3$ film was obtained at 530 $^{\circ}$C. Atomic-resolution scanning transmission electron microscopy (STEM) investigations of the $γ$-$Ga_2O_3$ film grown at 470 $^{\circ}$C revealed a high density of antiphase boundaries. A planar defect model developed for $γ$-$Al_2O_3$ was extended to explain the stacking sequences of the Ga sublattice observed in the STEM images of $γ$-$Ga_2O_3$. The presence of the 180$^{\circ}$ rotational domains and 90$^{\circ}$ rotational domains of $β$-$Ga_2O_3$ inclusions within the $γ$-$Ga_2O_3$ matrix is discussed within the context of a comprehensive investigation of the epitaxial relationship between those two phases in the as-grown film at 470 $^{\circ}$C and the same film annealed at 600 $^{\circ}$C. The results led to the hypotheses that (i) incorporation of certain dopants including Si, Ge, Sn, Mg, Al, and Sc, into $β$-$Ga_2O_3$, locally stabilizes the "$γ$-phase" and (ii) the site preference(s) for these dopants promotes the formation of the "$γ$-phase" and/or $γ$-$Ga_2O_3$ solid solutions. However, in the absence of such dopants, pure $γ$-$Ga_2O_3$ remains the least stable $Ga_2O_3$ polymorph, as indicated by its very narrow growth window, lower growth temperatures relative to other $Ga_2O_3$ polymorphs, and the largest calculated difference in Helmholtz free energy per formula unit between $γ$-$Ga_2O_3$ and $β$-$Ga_2O_3$ than all other polymorphs.
△ Less
Submitted 20 October, 2023; v1 submitted 19 October, 2023;
originally announced October 2023.
-
Materials Informatics Transformer: A Language Model for Interpretable Materials Properties Prediction
Authors:
Hongshuo Huang,
Rishikesh Magar,
Changwen Xu,
Amir Barati Farimani
Abstract:
Recently, the remarkable capabilities of large language models (LLMs) have been illustrated across a variety of research domains such as natural language processing, computer vision, and molecular modeling. We extend this paradigm by utilizing LLMs for material property prediction by introducing our model Materials Informatics Transformer (MatInFormer). Specifically, we introduce a novel approach…
▽ More
Recently, the remarkable capabilities of large language models (LLMs) have been illustrated across a variety of research domains such as natural language processing, computer vision, and molecular modeling. We extend this paradigm by utilizing LLMs for material property prediction by introducing our model Materials Informatics Transformer (MatInFormer). Specifically, we introduce a novel approach that involves learning the grammar of crystallography through the tokenization of pertinent space group information. We further illustrate the adaptability of MatInFormer by incorporating task-specific data pertaining to Metal-Organic Frameworks (MOFs). Through attention visualization, we uncover the key features that the model prioritizes during property prediction. The effectiveness of our proposed model is empirically validated across 14 distinct datasets, hereby underscoring its potential for high throughput screening through accurate material property prediction.
△ Less
Submitted 1 September, 2023; v1 submitted 30 August, 2023;
originally announced August 2023.
-
Diffraction limit of light in curved space
Authors:
**gxuan Zhang,
Chenni Xu,
Patrick Sebbah,
Li-Gang Wang
Abstract:
Overcoming diffraction limit is crucial for obtaining high-resolution image and observing fine microstructure. With this conventional difficulty still puzzling us and the prosperous development of wave dynamics of light interacting with gravitational fields in recent years, how spatial curvature affect the diffraction limit is an attractive and important question. Here we investigate the issue of…
▽ More
Overcoming diffraction limit is crucial for obtaining high-resolution image and observing fine microstructure. With this conventional difficulty still puzzling us and the prosperous development of wave dynamics of light interacting with gravitational fields in recent years, how spatial curvature affect the diffraction limit is an attractive and important question. Here we investigate the issue of diffraction limit and optical resolution on two-dimensional curved spaces - surfaces of revolution (SORs) with constant or variable spatial curvature. We show that the diffraction limit decreases and resolution is improved on SORs with positive Gaussian curvature, opening a new avenue to super-resolution. The diffraction limit is also influenced by propagation direction, as well as the propagation distance in curved space with variable spatial curvature. These results provide a possible method to control optical resolution in curved space or equivalent waveguides with varying refractive index distribution and may allow one to detect the presence of non-uniform strong gravitational effect by probing locally the optical resolution.
△ Less
Submitted 18 August, 2023;
originally announced August 2023.
-
Elasticity-Controlled Jamming Criticality in Soft Composite Solids
Authors:
Yiqiu Zhao,
Haitao Hu,
Yulu Huang,
Hanqing Liu,
Caishan Yan,
Chang Xu,
Rui Zhang,
Yifan Wang,
Qin Xu
Abstract:
Soft composite solids are made of inclusions dispersed within soft matrices. They are ubiquitous in nature and form the basis of many biological tissues. In the field of materials science, synthetic soft composites are promising candidates for building various engineering devices due to their highly programmable features. However, when the volume fraction of the inclusions increases, predicting th…
▽ More
Soft composite solids are made of inclusions dispersed within soft matrices. They are ubiquitous in nature and form the basis of many biological tissues. In the field of materials science, synthetic soft composites are promising candidates for building various engineering devices due to their highly programmable features. However, when the volume fraction of the inclusions increases, predicting the mechanical properties of these materials poses a significant challenge for the classical theories of composite mechanics. The difficulty arises from the inherently disordered, multi-scale interactions between the inclusions and the matrix. To address this challenge, we systematically investigated the mechanics of densely filled soft elastomers containing stiff microspheres. We experimentally demonstrated how the strain-stiffening response of the soft composites is governed by the critical scalings in the vicinity of a shear-jamming transition of the included particles. The proposed criticality framework quantitatively connects the overall mechanics of a soft composite with the elasticity of the matrix and the particles, and captures the diverse mechanical responses observed across a wide range of material parameters. The findings uncover a novel design paradigm of composite mechanics that relies on engineering the jamming properties of the embedded inclusions.
△ Less
Submitted 13 June, 2024; v1 submitted 4 August, 2023;
originally announced August 2023.
-
The LCLS-II Photoinjector Laser Infrastructure
Authors:
Hao Zhang,
Sasha Gilevich,
Alan Miahnahri,
Shawn Alverson,
Axel Brachmann,
Joseph Duris,
Paris Franz,
Alan Fry,
Jack Hirschman,
Kirk Larsen,
Randy Lemons,
Siqi Li,
Brittany Lu,
Agostino Marinelli,
Mikael Martinez,
Justin May,
Erel Milshtein,
Krishna Murari,
Nicole Neveu,
Joseph Robinson,
John Schmerge,
Linshan Sun,
Theodore Vecchione,
Chengcheng Xu,
Feng Zhou
, et al. (1 additional authors not shown)
Abstract:
This paper presents a comprehensive technical overview of the Linac Coherent Light Source II (LCLS-II) photoinjector laser system, its first and foremost component. The LCLS-II photoinjector laser system serves as an upgrade to the original LCLS at SLAC National Accelerator Laboratory. This advanced laser system generates high-quality laser beams for LCLS-II, contributing to the instrument's unpre…
▽ More
This paper presents a comprehensive technical overview of the Linac Coherent Light Source II (LCLS-II) photoinjector laser system, its first and foremost component. The LCLS-II photoinjector laser system serves as an upgrade to the original LCLS at SLAC National Accelerator Laboratory. This advanced laser system generates high-quality laser beams for LCLS-II, contributing to the instrument's unprecedented brightness, precision, and flexibility. Our discussion extends to the various subsystems that comprise the photoinjector, including the photocathode laser, laser heater, and beam transport systems. Lastly, we draw attention to the ongoing research and development infrastructure underway to enhance the functionality and efficiency of the LCLS-II, and similar X-ray free-electron laser facilities around the world, thereby contributing to the future of laser technology and its applications.
△ Less
Submitted 17 May, 2024; v1 submitted 22 July, 2023;
originally announced July 2023.
-
Automated Exploration of Reaction Network and Mechanism via Meta-dynamics Nanoreactor
Authors:
Yutai Zhang,
Chao Xu,
Zhenggang Lan
Abstract:
We developed an automated approach to construct the complex reaction network and explore the reaction mechanism for several reactant molecules. The nanoreactor type molecular dynamics was employed to generate possible chemical reactions, in which the meta-dynamics was taken to overcome reaction barriers and the semi-empirical GFN2-xTB method was used to reduce computational cost. The identificatio…
▽ More
We developed an automated approach to construct the complex reaction network and explore the reaction mechanism for several reactant molecules. The nanoreactor type molecular dynamics was employed to generate possible chemical reactions, in which the meta-dynamics was taken to overcome reaction barriers and the semi-empirical GFN2-xTB method was used to reduce computational cost. The identification of reaction events from trajectories was conducted by using the hidden Markov model based on the evolution of the molecular connectivity. This provided the starting points for the further transition state searches at the more accurate electronic structure levels to obtain the reaction mechanism. Then the whole reaction network with multiply pathways was obtained. The feasibility and efficiency of this automated construction of the reaction network was examined by two examples. The first reaction under study was the HCHO + NH3 biomolecular reaction. The second example focused on the reaction network for a multi-species system composed of dozens of HCN and H2O compounds. The result indicated that the proposed approach was a valuable and effective tool for the automated exploration of reaction networks.
△ Less
Submitted 8 July, 2023; v1 submitted 25 June, 2023;
originally announced June 2023.
-
Learning to Do or Learning While Doing: Reinforcement Learning and Bayesian Optimisation for Online Continuous Tuning
Authors:
Jan Kaiser,
Chenran Xu,
Annika Eichler,
Andrea Santamaria Garcia,
Oliver Stein,
Erik Bründermann,
Willi Kuropka,
Hannes Dinter,
Frank Mayet,
Thomas Vinatier,
Florian Burkart,
Holger Schlarb
Abstract:
Online tuning of real-world plants is a complex optimisation problem that continues to require manual intervention by experienced human operators. Autonomous tuning is a rapidly expanding field of research, where learning-based methods, such as Reinforcement Learning-trained Optimisation (RLO) and Bayesian optimisation (BO), hold great promise for achieving outstanding plant performance and reduci…
▽ More
Online tuning of real-world plants is a complex optimisation problem that continues to require manual intervention by experienced human operators. Autonomous tuning is a rapidly expanding field of research, where learning-based methods, such as Reinforcement Learning-trained Optimisation (RLO) and Bayesian optimisation (BO), hold great promise for achieving outstanding plant performance and reducing tuning times. Which algorithm to choose in different scenarios, however, remains an open question. Here we present a comparative study using a routine task in a real particle accelerator as an example, showing that RLO generally outperforms BO, but is not always the best choice. Based on the study's results, we provide a clear set of criteria to guide the choice of algorithm for a given tuning task. These can ease the adoption of learning-based autonomous tuning solutions to the operation of complex real-world plants, ultimately improving the availability and pushing the limits of operability of these facilities, thereby enabling scientific and engineering advancements.
△ Less
Submitted 6 June, 2023;
originally announced June 2023.
-
The Lobster Eye Imager for Astronomy Onboard the SATech-01 Satellite
Authors:
Z. X. Ling,
X. J. Sun,
C. Zhang,
S. L. Sun,
G. **,
S. N. Zhang,
X. F. Zhang,
J. B. Chang,
F. S. Chen,
Y. F. Chen,
Z. W. Cheng,
W. Fu,
Y. X. Han,
H. Li,
J. F. Li,
Y. Li,
Z. D. Li,
P. R. Liu,
Y. H. Lv,
X. H. Ma,
Y. J. Tang,
C. B. Wang,
R. J. Xie,
Y. L. Xue,
A. L. Yan
, et al. (101 additional authors not shown)
Abstract:
The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (Fo…
▽ More
The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (FoV) of 346 square degrees (18.6 degrees * 18.6 degrees) of the X-ray imager is realized. An optical assembly composed of 36 MPO chips is used to focus incident X-ray photons, and four large-format complementary metal-oxide semiconductor (CMOS) sensors, each of 6 cm * 6 cm, are used as the focal plane detectors. The instrument has an angular resolution of 4 - 8 arcmin (in FWHM) for the central focal spot of the point spread function, and an effective area of 2 - 3 cm2 at 1 keV in essentially all the directions within the field of view. The detection passband is 0.5 - 4 keV in the soft X-rays and the sensitivity is 2 - 3 * 10-11 erg s-1 cm-2 (about 1 mini-Crab) at 1,000 second observation. The total weight of LEIA is 56 kg and the power is 85 W. The satellite, with a design lifetime of 2 years, operates in a Sun-synchronous orbit of 500 km with an orbital period of 95 minutes. LEIA is paving the way for future missions by verifying in flight the technologies of both novel focusing imaging optics and CMOS sensors for X-ray observation, and by optimizing the working setups of the instrumental parameters. In addition, LEIA is able to carry out scientific observations to find new transients and to monitor known sources in the soft X-ray band, albeit limited useful observing time available.
△ Less
Submitted 24 May, 2023;
originally announced May 2023.
-
Magnetic field-induced weak-to-strong-link transformation in patterned superconducting films
Authors:
D. A. D. Chaves,
M. I. Valerio-Cuadros,
L. Jiang,
E. A. Abbey,
F. Colauto,
A. A. M. Oliveira,
A. M. H. Andrade,
L. B. L. G. Pinheiro,
T. H. Johansen,
C. Xue,
Y. -H. Zhou,
A. V. Silhanek,
W. A. Ortiz,
M. Motta
Abstract:
Ubiquitous in most superconducting materials and a common result of nanofabrication processes, weak-links are known for their limiting effects on the transport of electric currents. Still, they are at the root of key features of superconducting technology. By performing quantitative magneto-optical imaging experiments and thermomagnetic model simulations, we correlate the existence of local maxima…
▽ More
Ubiquitous in most superconducting materials and a common result of nanofabrication processes, weak-links are known for their limiting effects on the transport of electric currents. Still, they are at the root of key features of superconducting technology. By performing quantitative magneto-optical imaging experiments and thermomagnetic model simulations, we correlate the existence of local maxima in the magnetization loops of FIB-patterned Nb films to a magnetic field-induced weak-to-strong-link transformation increasing their critical current. This phenomenon arises from the nanoscale interaction between quantized magnetic flux lines and FIB-induced modifications of the device microstructure. Under an ac drive field, this leads to a rectified vortex motion along the weak-link. The reported tunable effect can be exploited in the development of new superconducting electronic devices, such as flux pumps and valves, to attenuate or amplify the supercurrent through a circuit element, and as a strategy to enhance the critical current in weak-link-bearing devices.
△ Less
Submitted 9 October, 2023; v1 submitted 7 May, 2023;
originally announced May 2023.
-
Defect emission and its dipole orientation in layered ternary Znln2S4 semiconductor
Authors:
Rui Wang,
Quan Liu,
Sheng Dai,
Chao-Ming Liu,
Yue Liu,
Zhao-Yuan Sun,
Hui Li,
Chang-** Zhang,
Han Wang,
Cheng-Yan Xu,
Wen-Zhu Shao,
Alfred J. Meixner,
Dai Zhang,
Yang Li,
Liang Zhen
Abstract:
Defect engineering is promising to tailor the physical properties of two-dimensional (2D) semiconductors for function-oriented electronics and optoelectronics. Compared with the extensively studied 2D binary materials, the origin of defects and their influence on physical properties of 2D ternary semiconductors have not been clarified. In this work, we thoroughly studied the effect of defects on t…
▽ More
Defect engineering is promising to tailor the physical properties of two-dimensional (2D) semiconductors for function-oriented electronics and optoelectronics. Compared with the extensively studied 2D binary materials, the origin of defects and their influence on physical properties of 2D ternary semiconductors have not been clarified. In this work, we thoroughly studied the effect of defects on the electronic structure and optical properties of few-layer hexagonal Znln2S4 via versatile spectroscopic tools in combination with theoretical calculations. It has been demonstrated that the Zn-In anti-structural defects induce the formation of a series of donor and acceptor levels inside the bandgap, leading to rich recombination paths for defect emission and extrinsic absorption. Impressively, the emission of donor-acceptor pair (DAP) in Znln2S4 can be significantly tailored by electrostatic gating due to efficient tunability of Fermi level (Ef). Furthermore, the layer-dependent dipole orientation of defect emission in Znln2S4 was directly revealed by back focal plane (BFP) imagining, where it presents obviously in-plane dipole orientation within a dozen layers thickness of Znln2S4. These unique features of defects in Znln2S4 including extrinsic absorption, rich recombination paths, gate tunability and in-plane dipole orientation will definitely benefit to the advanced orientation-functional optoelectronic applications.
△ Less
Submitted 27 April, 2023;
originally announced April 2023.
-
STCF Conceptual Design Report: Volume 1 -- Physics & Detector
Authors:
M. Achasov,
X. C. Ai,
R. Aliberti,
L. P. An,
Q. An,
X. Z. Bai,
Y. Bai,
O. Bakina,
A. Barnyakov,
V. Blinov,
V. Bobrovnikov,
D. Bodrov,
A. Bogomyagkov,
A. Bondar,
I. Boyko,
Z. H. Bu,
F. M. Cai,
H. Cai,
J. J. Cao,
Q. H. Cao,
Z. Cao,
Q. Chang,
K. T. Chao,
D. Y. Chen,
H. Chen
, et al. (413 additional authors not shown)
Abstract:
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII,…
▽ More
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII, providing a unique platform for exploring the asymmetry of matter-antimatter (charge-parity violation), in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions, as well as searching for exotic hadrons and physics beyond the Standard Model. The STCF project in China is under development with an extensive R\&D program. This document presents the physics opportunities at the STCF, describes conceptual designs of the STCF detector system, and discusses future plans for detector R\&D and physics case studies.
△ Less
Submitted 5 October, 2023; v1 submitted 28 March, 2023;
originally announced March 2023.
-
Bias sputtering of granular $\text{L1}_0$-FePt films with hexagonal boron nitride grain boundaries
Authors:
Chengchao Xu,
B. S. D. Ch. S Varaprasad,
David E. Laughlin,
Jian-Gang,
Zhu
Abstract:
In this paper, we present an experimental study of $\text{L1}_0$-FePt granular films with crystalline/amorphous boron nitride (BN) grain boundary materials for heat assisted magnetic recording (HAMR). It is found that an adequate RF substrate bias yields the formation of hexagonal boron nitride (h-BN) nanosheets in grain boundaries, facilitating the columnar growth of FePt grains during sputtering…
▽ More
In this paper, we present an experimental study of $\text{L1}_0$-FePt granular films with crystalline/amorphous boron nitride (BN) grain boundary materials for heat assisted magnetic recording (HAMR). It is found that an adequate RF substrate bias yields the formation of hexagonal boron nitride (h-BN) nanosheets in grain boundaries, facilitating the columnar growth of FePt grains during sputtering at high temperatures. The h-BN monolayers conform to the side surfaces of columnar FePt grains, completely encircling individual FePt grains. The resulting core-shell FePt/h-BN nanostructures appear to be highly promising for HAMR application. The high thermal stability of h-BN grain boundaries allows the deposition temperature to be as high as 800oC such that high order parameters of FePt $\text{L1}_0$ phase have been obtained. For the fabricated FePt/h-BN thin film, excellent granular microstructure with FePt grains of 6.5nm in diameter and 11.5nm in height has been achieved along with good magnetic hysteresis properties.
△ Less
Submitted 20 March, 2023;
originally announced March 2023.
-
The JUNO experiment Top Tracker
Authors:
JUNO Collaboration,
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Abid Aleem,
Tsagkarakis Alexandros,
Fengpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Weidong Bai,
Nikita Balashov,
Wander Baldini,
Andrea Barresi,
Davide Basilico,
Eric Baussan,
Marco Bellato
, et al. (592 additional authors not shown)
Abstract:
The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector…
▽ More
The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector, covering about 60% of the surface above them. The JUNO Top Tracker is constituted by the decommissioned OPERA experiment Target Tracker modules. The technology used consists in walls of two planes of plastic scintillator strips, one per transverse direction. Wavelength shifting fibres collect the light signal emitted by the scintillator strips and guide it to both ends where it is read by multianode photomultiplier tubes. Compared to the OPERA Target Tracker, the JUNO Top Tracker uses new electronics able to cope with the high rate produced by the high rock radioactivity compared to the one in Gran Sasso underground laboratory. This paper will present the new electronics and mechanical structure developed for the Top Tracker of JUNO along with its expected performance based on the current detector simulation.
△ Less
Submitted 9 March, 2023;
originally announced March 2023.
-
JUNO sensitivity to $^7$Be, $pep$, and CNO solar neutrinos
Authors:
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Abid Aleem,
Tsagkarakis Alexandros,
Fengpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Weidong Bai,
Nikita Balashov,
Wander Baldini,
Andrea Barresi,
Davide Basilico,
Eric Baussan,
Marco Bellato,
Marco Beretta
, et al. (592 additional authors not shown)
Abstract:
The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented…
▽ More
The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented levels of precision. In this paper, we provide estimation of the JUNO sensitivity to 7Be, pep, and CNO solar neutrinos that can be obtained via a spectral analysis above the 0.45 MeV threshold. This study is performed assuming different scenarios of the liquid scintillator radiopurity, ranging from the most opti mistic one corresponding to the radiopurity levels obtained by the Borexino experiment, up to the minimum requirements needed to perform the neutrino mass ordering determination with reactor antineutrinos - the main goal of JUNO. Our study shows that in most scenarios, JUNO will be able to improve the current best measurements on 7Be, pep, and CNO solar neutrino fluxes. We also perform a study on the JUNO capability to detect periodical time variations in the solar neutrino flux, such as the day-night modulation induced by neutrino flavor regeneration in Earth, and the modulations induced by temperature changes driven by helioseismic waves.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
Denoise Pretraining on Nonequilibrium Molecules for Accurate and Transferable Neural Potentials
Authors:
Yuyang Wang,
Changwen Xu,
Zijie Li,
Amir Barati Farimani
Abstract:
Recent advances in equivariant graph neural networks (GNNs) have made deep learning amenable to develo** fast surrogate models to expensive ab initio quantum mechanics (QM) approaches for molecular potential predictions. However, building accurate and transferable potential models using GNNs remains challenging, as the data is greatly limited by the expensive computational costs and level of the…
▽ More
Recent advances in equivariant graph neural networks (GNNs) have made deep learning amenable to develo** fast surrogate models to expensive ab initio quantum mechanics (QM) approaches for molecular potential predictions. However, building accurate and transferable potential models using GNNs remains challenging, as the data is greatly limited by the expensive computational costs and level of theory of QM methods, especially for large and complex molecular systems. In this work, we propose denoise pretraining on nonequilibrium molecular conformations to achieve more accurate and transferable GNN potential predictions. Specifically, atomic coordinates of sampled nonequilibrium conformations are perturbed by random noises and GNNs are pretrained to denoise the perturbed molecular conformations which recovers the original coordinates. Rigorous experiments on multiple benchmarks reveal that pretraining significantly improves the accuracy of neural potentials. Furthermore, we show that the proposed pretraining approach is model-agnostic, as it improves the performance of different invariant and equivariant GNNs. Notably, our models pretrained on small molecules demonstrate remarkable transferability, improving performance when fine-tuned on diverse molecular systems, including different elements, charged molecules, biomolecules, and larger systems. These results highlight the potential for leveraging denoise pretraining approaches to build more generalizable neural potentials for complex molecular systems.
△ Less
Submitted 5 July, 2023; v1 submitted 3 March, 2023;
originally announced March 2023.
-
Implementation and performances of the IPbus protocol for the JUNO Large-PMT readout electronics
Authors:
Riccardo Triozzi,
Andrea Serafini,
Marco Bellato,
Antonio Bergnoli,
Matteo Bolognesi,
Riccardo Brugnera,
Vanessa Cerrone,
Chao Chen,
Barbara Clerbaux,
Alberto Coppi,
Daniele Corti,
Flavio dal Corso,
Jianmeng Dong,
Wei Dou,
Lei Fan,
Alberto Garfagnini,
Arsenii Gavrikov,
Guanghua Gong,
Marco Grassi,
Rosa Maria Guizzetti,
Shuang Hang,
Cong He,
Jun Hu,
Roberto Isocrate,
Beatrice Jelmini
, et al. (107 additional authors not shown)
Abstract:
The Jiangmen Underground Neutrino Observatory (JUNO) is a large neutrino detector currently under construction in China. Thanks to the tight requirements on its optical and radio-purity properties, it will be able to perform leading measurements detecting terrestrial and astrophysical neutrinos in a wide energy range from tens of keV to hundreds of MeV. A key requirement for the success of the exp…
▽ More
The Jiangmen Underground Neutrino Observatory (JUNO) is a large neutrino detector currently under construction in China. Thanks to the tight requirements on its optical and radio-purity properties, it will be able to perform leading measurements detecting terrestrial and astrophysical neutrinos in a wide energy range from tens of keV to hundreds of MeV. A key requirement for the success of the experiment is an unprecedented 3% energy resolution, guaranteed by its large active mass (20 kton) and the use of more than 20,000 20-inch photo-multiplier tubes (PMTs) acquired by high-speed, high-resolution sampling electronics located very close to the PMTs. As the Front-End and Read-Out electronics is expected to continuously run underwater for 30 years, a reliable readout acquisition system capable of handling the timestamped data stream coming from the Large-PMTs and permitting to simultaneously monitor and operate remotely the inaccessible electronics had to be developed. In this contribution, the firmware and hardware implementation of the IPbus based readout protocol will be presented, together with the performances measured on final modules during the mass production of the electronics.
△ Less
Submitted 20 February, 2023;
originally announced February 2023.
-
Mass testing of the JUNO experiment 20-inch PMTs readout electronics
Authors:
Alberto Coppi,
Beatrice Jelmini,
Marco Bellato,
Antonio Bergnoli,
Matteo Bolognesi,
Riccardo Brugnera,
Vanessa Cerrone,
Chao Chen,
Barbara Clerbaux,
Daniele Corti,
Flavio dal Corso,
Jianmeng Dong,
Wei Dou,
Lei Fan,
Alberto Garfagnini,
Arsenii Gavrikov,
Guanghua Gong,
Marco Grassi,
Rosa Maria Guizzetti,
Shuang Hang,
Cong He,
Jun Hu,
Roberto Isocrate,
Xiaolu Ji,
Xiaoshan Jiang
, et al. (107 additional authors not shown)
Abstract:
The Jiangmen Underground Neutrino Observatory (JUNO) is a multi-purpose, large size, liquid scintillator experiment under construction in China. JUNO will perform leading measurements detecting neutrinos from different sources (reactor, terrestrial and astrophysical neutrinos) covering a wide energy range (from 200 keV to several GeV). This paper focuses on the design and development of a test pro…
▽ More
The Jiangmen Underground Neutrino Observatory (JUNO) is a multi-purpose, large size, liquid scintillator experiment under construction in China. JUNO will perform leading measurements detecting neutrinos from different sources (reactor, terrestrial and astrophysical neutrinos) covering a wide energy range (from 200 keV to several GeV). This paper focuses on the design and development of a test protocol for the 20-inch PMT underwater readout electronics, performed in parallel to the mass production line. In a time period of about ten months, a total number of 6950 electronic boards were tested with an acceptance yield of 99.1%.
△ Less
Submitted 11 January, 2023;
originally announced January 2023.
-
Differentiable modeling to unify machine learning and physical models and advance Geosciences
Authors:
Chaopeng Shen,
Alison P. Appling,
Pierre Gentine,
Toshiyuki Bandai,
Hoshin Gupta,
Alexandre Tartakovsky,
Marco Baity-Jesi,
Fabrizio Fenicia,
Daniel Kifer,
Li Li,
Xiaofeng Liu,
Wei Ren,
Yi Zheng,
Ciaran J. Harman,
Martyn Clark,
Matthew Farthing,
Dapeng Feng,
Praveen Kumar,
Doaa Aboelyazeed,
Farshid Rahmani,
Hylke E. Beck,
Tadd Bindas,
Dipankar Dwivedi,
Kuai Fang,
Marvin Höge
, et al. (5 additional authors not shown)
Abstract:
Process-Based Modeling (PBM) and Machine Learning (ML) are often perceived as distinct paradigms in the geosciences. Here we present differentiable geoscientific modeling as a powerful pathway toward dissolving the perceived barrier between them and ushering in a paradigm shift. For decades, PBM offered benefits in interpretability and physical consistency but struggled to efficiently leverage lar…
▽ More
Process-Based Modeling (PBM) and Machine Learning (ML) are often perceived as distinct paradigms in the geosciences. Here we present differentiable geoscientific modeling as a powerful pathway toward dissolving the perceived barrier between them and ushering in a paradigm shift. For decades, PBM offered benefits in interpretability and physical consistency but struggled to efficiently leverage large datasets. ML methods, especially deep networks, presented strong predictive skills yet lacked the ability to answer specific scientific questions. While various methods have been proposed for ML-physics integration, an important underlying theme -- differentiable modeling -- is not sufficiently recognized. Here we outline the concepts, applicability, and significance of differentiable geoscientific modeling (DG). "Differentiable" refers to accurately and efficiently calculating gradients with respect to model variables, critically enabling the learning of high-dimensional unknown relationships. DG refers to a range of methods connecting varying amounts of prior knowledge to neural networks and training them together, capturing a different scope than physics-guided machine learning and emphasizing first principles. Preliminary evidence suggests DG offers better interpretability and causality than ML, improved generalizability and extrapolation capability, and strong potential for knowledge discovery, while approaching the performance of purely data-driven ML. DG models require less training data while scaling favorably in performance and efficiency with increasing amounts of data. With DG, geoscientists may be better able to frame and investigate questions, test hypotheses, and discover unrecognized linkages.
△ Less
Submitted 26 December, 2023; v1 submitted 10 January, 2023;
originally announced January 2023.
-
Spinel Cu-Mn-Cr Oxide Nanoparticle-Pigmented Solar Selective Coatings Maintaining >94% Efficiency at 750 degrees C
Authors:
Can Xu,
Xiaoxin Wang,
Jifeng Liu
Abstract:
High-temperature concentrating solar power (CSP) system is capable of harvesting and storing solar energy as heat towards cost-effective dispatchable solar electricity. Solar selective coating is a critical component to boost its efficiency by maximizing solar absorptance and minimizing thermal emittance losses. However, maintaining a high solar-thermal conversion efficiency >90% for long-term ope…
▽ More
High-temperature concentrating solar power (CSP) system is capable of harvesting and storing solar energy as heat towards cost-effective dispatchable solar electricity. Solar selective coating is a critical component to boost its efficiency by maximizing solar absorptance and minimizing thermal emittance losses. However, maintaining a high solar-thermal conversion efficiency >90% for long-term operation at >750 degrees C remains a significant challenge. Herein, we report spray-coated spinel Cu-Mn-Cr oxide nanoparticle-pigmented solar selective coatings on Inconel tube sections maintaining >94% efficiency at 750 degrees C and >92.5% at 800 degrees C under 1000x solar concentration after 60 simulated day-night thermal cycles in air, each cycle comprising 12h at 750 degrees C/800 degrees C and 12h cooling to 25 degrees C. The solar spectral selectivity is intrinsic to the band-to-band and d-d transitions of non-stoichiometric spinel Cu-Mn-Cr oxide nanoparticles by balancing the lattice site inversion of Cu2+ and Mn3+ on tetrahedral vs. octahedral sites. This feature offers a large fabrication tolerance in nanoparticle volume fraction and coating thickness, facilitating low-cost and scalable spray-coated high-efficiency solar selective absorbers for high-temperature CSP systems.
△ Less
Submitted 3 January, 2023;
originally announced January 2023.
-
Quantum Induced Coherence Light Detection and Ranging
Authors:
Gewei Qian,
Xingqi Xu,
Shun-An Zhu,
Chenran Xu,
Fei Gao,
V. V. Yakovlev,
Xu Liu,
Shi-Yao Zhu,
Da-Wei Wang
Abstract:
Quantum illumination has been proposed and demonstrated to improve the signal-to-noise ratio (SNR) in light detection and ranging (LiDAR). When relying on coincidence detection, such a quantum LiDAR is limited by the response time of the detector and suffers from jamming noise. Inspired by the Zou-Wang-Mandel experiment, we design, construct and validate a quantum induced coherence (QuIC) LiDAR wh…
▽ More
Quantum illumination has been proposed and demonstrated to improve the signal-to-noise ratio (SNR) in light detection and ranging (LiDAR). When relying on coincidence detection, such a quantum LiDAR is limited by the response time of the detector and suffers from jamming noise. Inspired by the Zou-Wang-Mandel experiment, we design, construct and validate a quantum induced coherence (QuIC) LiDAR which is inherently immune to ambient and jamming noises. In traditional LiDAR the direct detection of the reflected probe photons suffers from deteriorating SNR for increasing background noise. In QuIC LiDAR we circumvent this obstacle by only detecting the entangled reference photons, whose single-photon interference fringes are used to obtain the distance of the object, while the reflected probe photons are used to erase path information of the reference photons. In consequence, the noise accompanying the reflected probe light has no effect on the detected signal. We demonstrate such noise resilience with both LED and laser light to mimic the background noise and jamming attack. The proposed method paves a new way of battling noise in precise quantum electromagnetic sensing and ranging.
△ Less
Submitted 5 February, 2023; v1 submitted 25 December, 2022;
originally announced December 2022.
-
Validation and integration tests of the JUNO 20-inch PMTs readout electronics
Authors:
Vanessa Cerrone,
Katharina von Sturm,
Marco Bellato,
Antonio Bergnoli,
Matteo Bolognesi,
Riccardo Brugnera,
Chao Chen,
Barbara Clerbaux,
Alberto Coppi,
Flavio dal Corso,
Daniele Corti,
Jianmeng Dong,
Wei Dou,
Lei Fan,
Alberto Garfagnini,
Guanghua Gong,
Marco Grassi,
Shuang Hang,
Rosa Maria Guizzetti,
Cong He,
Jun Hu,
Roberto Isocrate,
Beatrice Jelmini,
Xiaolu Ji,
Xiaoshan Jiang
, et al. (105 additional authors not shown)
Abstract:
The Jiangmen Underground Neutrino Observatory (JUNO) is a large neutrino detector currently under construction in China. JUNO will be able to study the neutrino mass ordering and to perform leading measurements detecting terrestrial and astrophysical neutrinos in a wide energy range, spanning from 200 keV to several GeV. Given the ambitious physics goals of JUNO, the electronic system has to meet…
▽ More
The Jiangmen Underground Neutrino Observatory (JUNO) is a large neutrino detector currently under construction in China. JUNO will be able to study the neutrino mass ordering and to perform leading measurements detecting terrestrial and astrophysical neutrinos in a wide energy range, spanning from 200 keV to several GeV. Given the ambitious physics goals of JUNO, the electronic system has to meet specific tight requirements, and a thorough characterization is required. The present paper describes the tests performed on the readout modules to measure their performances.
△ Less
Submitted 16 December, 2022;
originally announced December 2022.
-
General time-reversal equivariant neural network potential for magnetic materials
Authors:
Hongyu Yu,
Boyu Liu,
Yang Zhong,
Liangliang Hong,
Junyi Ji,
Changsong Xu,
Xingao Gong,
Hongjun Xiang
Abstract:
This study introduces time-reversal E(3)-equivariant neural network and SpinGNN++ framework for constructing a comprehensive interatomic potential for magnetic systems, encompassing spin-orbit coupling and noncollinear magnetic moments. SpinGNN++ integrates multitask spin equivariant neural network with explicit spin-lattice terms, including Heisenberg, Dzyaloshinskii-Moriya, Kitaev, single-ion an…
▽ More
This study introduces time-reversal E(3)-equivariant neural network and SpinGNN++ framework for constructing a comprehensive interatomic potential for magnetic systems, encompassing spin-orbit coupling and noncollinear magnetic moments. SpinGNN++ integrates multitask spin equivariant neural network with explicit spin-lattice terms, including Heisenberg, Dzyaloshinskii-Moriya, Kitaev, single-ion anisotropy, and biquadratic interactions, and employs time-reversal equivariant neural network to learn high-order spin-lattice interactions using time-reversal E(3)-equivariant convolutions. To validate SpinGNN++, a complex magnetic model dataset is introduced as a benchmark and employed to demonstrate its capabilities. SpinGNN++ provides accurate descriptions of the complex spin-lattice coupling in monolayer CrI$_3$ and CrTe$_2$, achieving sub-meV errors. Importantly, it facilitates large-scale parallel spin-lattice dynamics, thereby enabling the exploration of associated properties, including the magnetic ground state and phase transition. Remarkably, SpinGNN++ identifies a new ferrimagnetic state as the ground magnetic state for monolayer CrTe2, thereby enriching its phase diagram and providing deeper insights into the distinct magnetic signals observed in various experiments.
△ Less
Submitted 8 January, 2024; v1 submitted 21 November, 2022;
originally announced November 2022.
-
Bayesian Optimization of the Beam Injection Process into a Storage Ring
Authors:
Chenran Xu,
Tobias Boltz,
Akira Mochihashi,
Andrea Santamaria Garcia,
Marcel Schuh,
Anke-Susanne Müller
Abstract:
We have evaluated the data-efficient Bayesian optimization method for the specific task of injection tuning in a circular accelerator. In this paper, we describe the implementation of this method at the Karlsruhe Research Accelerator with up to nine tuning parameters, including the determination of the associated hyperparameters. We show that the Bayesian optimization method outperforms manual tun…
▽ More
We have evaluated the data-efficient Bayesian optimization method for the specific task of injection tuning in a circular accelerator. In this paper, we describe the implementation of this method at the Karlsruhe Research Accelerator with up to nine tuning parameters, including the determination of the associated hyperparameters. We show that the Bayesian optimization method outperforms manual tuning and the commonly used Nelder-Mead optimization algorithm both in simulation and experiment. The algorithm was also successfully used to ease the commissioning phase after the installation of new injection magnets and is regularly used during accelerator operations. We demonstrate that the introduction of context variables that include intra-bunch scattering effects, such as the Touschek effect, further improves the control and robustness of the injection process.
△ Less
Submitted 6 March, 2023; v1 submitted 17 November, 2022;
originally announced November 2022.
-
Neural Network Prior Mean for Particle Accelerator Injector Tuning
Authors:
Connie Xu,
Ryan Roussel,
Auralee Edelen
Abstract:
Bayesian optimization has been shown to be a powerful tool for solving black box problems during online accelerator optimization. The major advantage of Bayesian based optimization techniques is the ability to include prior information about the problem to speed up optimization, even if that information is not perfectly correlated with experimental measurements. In parallel, neural network surroga…
▽ More
Bayesian optimization has been shown to be a powerful tool for solving black box problems during online accelerator optimization. The major advantage of Bayesian based optimization techniques is the ability to include prior information about the problem to speed up optimization, even if that information is not perfectly correlated with experimental measurements. In parallel, neural network surrogate system models of accelerator facilities are increasingly being made available, but at present they are not widely used in online optimization. In this work, we demonstrate the use of an approximate neural network surrogate model as a prior mean for Gaussian processes used in Bayesian optimization in a realistic setting. We show that the initial performance of Bayesian optimization is improved by using neural network surrogate models, even when surrogate models make erroneous predictions. Finally, we quantify requirements on surrogate prediction accuracy to achieve optimization performance when solving problems in high dimensional input spaces.
△ Less
Submitted 16 November, 2022;
originally announced November 2022.
-
GotFlow3D: Recurrent Graph Optimal Transport for Learning 3D Flow Motion in Particle Tracking
Authors:
Jiaming Liang,
Chao Xu,
Shengze Cai
Abstract:
Flow visualization technologies such as particle tracking velocimetry (PTV) are broadly used in understanding the all-pervasiveness three-dimensional (3D) turbulent flow from nature and industrial processes. Despite the advances in 3D acquisition techniques, the developed motion estimation algorithms in particle tracking remain great challenges of large particle displacements, dense particle distr…
▽ More
Flow visualization technologies such as particle tracking velocimetry (PTV) are broadly used in understanding the all-pervasiveness three-dimensional (3D) turbulent flow from nature and industrial processes. Despite the advances in 3D acquisition techniques, the developed motion estimation algorithms in particle tracking remain great challenges of large particle displacements, dense particle distributions and high computational cost. By introducing a novel deep neural network based on recurrent Graph Optimal Transport, called GotFlow3D, we present an end-to-end solution to learn the 3D fluid flow motion from double-frame particle sets. The proposed network constructs two graphs in the geometric and feature space and further enriches the original particle representations with the fused intrinsic and extrinsic features learnt from a graph neural network. The extracted deep features are subsequently utilized to make optimal transport plans indicating the correspondences of particle pairs, which are then iteratively and adaptively retrieved to guide the recurrent flow learning. Experimental evaluations, including assessments on numerical experiments and validations on real-world experiments, demonstrate that the proposed GotFlow3D achieves state-of-the-art performance against both recently-developed scene flow learners and particle tracking algorithms, with impressive accuracy, robustness and generalization ability, which can provide deeper insight into the complex dynamics of broad physical and biological systems.
△ Less
Submitted 30 October, 2022;
originally announced October 2022.