Showing 1–50 of 131 results for author: Xu, F

Turbulence modulation in liquid-liquid two-phase Taylor-Couette turbulence

Authors: **ghong Su, Cheng Wang, Yi-bao Zhang, Fan Xu, Junwu Wang, Chao Sun

Abstract: We investigate the coupling effects of the two-phase interface, viscosity ratio, and density ratio of the dispersed phase to the continuous phase on the flow statistics in two-phase Taylor-Couette turbulence at a system Reynolds number of 6000 and a system Weber number of 10 using interface-resolved three-dimensional direct numerical simulations with the volume-of-fluid method. Our study focuses o… ▽ More We investigate the coupling effects of the two-phase interface, viscosity ratio, and density ratio of the dispersed phase to the continuous phase on the flow statistics in two-phase Taylor-Couette turbulence at a system Reynolds number of 6000 and a system Weber number of 10 using interface-resolved three-dimensional direct numerical simulations with the volume-of-fluid method. Our study focuses on four different scenarios: neutral droplets, low-viscosity droplets, light droplets, and low-viscosity light droplets. We find that neutral droplets and low-viscosity droplets primarily contribute to drag enhancement through the two-phase interface, while light droplets reduce the system's drag by explicitly reducing Reynolds stress due to the density dependence of Reynolds stress. Additionally, low-viscosity light droplets contribute to greater drag reduction by further reducing momentum transport near the inner cylinder and implicitly reducing Reynolds stress. While interfacial tension enhances turbulent kinetic energy (TKE) transport, drag enhancement is not strongly correlated with TKE transport for both neutral droplets and low-viscosity droplets. Light droplets primarily reduce the production term by diminishing Reynolds stress, whereas the density contrast between the phases boosts TKE transport near the inner wall. Therefore, the reduction in the dissipation rate is predominantly attributed to decreased turbulence production, causing drag reduction. For low-viscosity light droplets, the production term diminishes further, primarily due to their greater reduction in Reynolds stress, while reduced viscosity weakens the density difference's contribution to TKE transport near the inner cylinder, resulting in a more pronounced reduction in the dissipation rate and consequently stronger drag reduction. Our findings provide new insights into the turbulence modulation in two-phase flow. △ Less

Submitted 1 July, 2024; originally announced July 2024.

Data quality control system and long-term performance monitor of the LHAASO-KM2A

Authors: Zhen Cao, F. Aharonian, Axikegu, Y. X. Bai, Y. W. Bao, D. Bastieri, X. J. Bi, Y. J. Bi, W. Bian, A. V. Bukevich, Q. Cao, W. Y. Cao, Zhe Cao, J. Chang, J. F. Chang, A. M. Chen, E. S. Chen, H. X. Chen, Liang Chen, Lin Chen, Long Chen, M. J. Chen, M. L. Chen, Q. H. Chen, S. Chen , et al. (263 additional authors not shown)

Abstract: The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To… ▽ More The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively. △ Less

Submitted 13 June, 2024; v1 submitted 20 May, 2024; originally announced May 2024.

Comments: 15 pages, 9 figures

Super-resolution imaging based on active optical intensity interferometry

Authors: Lu-Chuan Liu, Cheng Wu, Wei Li, Yu-Ao Chen, Frank Wilczek, Xiao-Peng Shao, Feihu Xu, Qiang Zhang, Jian-Wei Pan

Abstract: Long baseline diffraction-limited optical aperture synthesis technology by interferometry plays an important role in scientific study and practical application. In contrast to amplitude (phase) interferometry, intensity interferometry -- which exploits the quantum nature of light to measure the photon bunching effect in thermal light -- is robust against atmospheric turbulence and optical defects.… ▽ More Long baseline diffraction-limited optical aperture synthesis technology by interferometry plays an important role in scientific study and practical application. In contrast to amplitude (phase) interferometry, intensity interferometry -- which exploits the quantum nature of light to measure the photon bunching effect in thermal light -- is robust against atmospheric turbulence and optical defects. However, a thermal light source typically has a significant divergence angle and a low average photon number per mode, forestalling the applicability over long ranges. Here, we propose and demonstrate active intensity interferometry for super-resolution imaging over the kilometer range. Our scheme exploits phase-independent multiple laser emitters to produce the thermal illumination and uses an elaborate computational algorithm to reconstruct the image. In outdoor environments, we image two-dimension millimeter-level targets over 1.36 kilometers at a resolution of 14 times the diffraction limit of a single telescope. High-resolution optical imaging and sensing are anticipated by applying long-baseline active intensity interferometry in general branches of physics and metrology. △ Less

Submitted 24 April, 2024; originally announced April 2024.

Comments: 42 pages, 11 figures

Reversible optical isolators and quasi-circulators using a magneto-optical Fabry-Pérot cavity

Authors: Tiantian Zhang, Wenpeng Zhou, Zhixiang Li, Yutao Tang, Fan Xu, Haodong Wu, Han Zhang, Jiang-Shan Tang, Ya-** Ruan, Keyu Xia

Abstract: Nonreciprocal optical devices are essential for laser protection, modern optical communication and quantum information processing by enforcing one-way light propagation. The conventional Faraday magneto-optical nonreciprocal devices rely on a strong magnetic field, which is provided by a permanent magnet. As a result, the isolation direction of such devices is fixed and severely restricts their ap… ▽ More Nonreciprocal optical devices are essential for laser protection, modern optical communication and quantum information processing by enforcing one-way light propagation. The conventional Faraday magneto-optical nonreciprocal devices rely on a strong magnetic field, which is provided by a permanent magnet. As a result, the isolation direction of such devices is fixed and severely restricts their applications in quantum networks.In this work, we experimentally demonstrate the simultaneous one-way transmission and unidirectional reflection by using a magneto-optical Fabry-Pérot cavity and a magnetic field strength of $50~\milli\tesla$. An optical isolator and a three-port quasi-circulator are realized based on this nonreciprocal cavity system. The isolator achieves an isolation ratio of up to $22~\deci\bel$ and an averaged insertion loss down to $0.97~\deci\bel$. The quasi-circulator is realized with a fidelity exceeding $99\%$ and an overall survival probability of $89.9\%$, corresponding to an insertion loss of $\sim 0.46~\deci\bel$. The magnetic field is provided by an electromagnetic coil, thereby allowing for reversing the light circulating path. The reversible quasi-circulator paves the way for building reconfigurable quantum networks. △ Less

Submitted 16 April, 2024; originally announced April 2024.

Comments: 8 pages, 7 figures

Journal ref: Chinese Physics Letters 4 (2024), 044205

Miniaturized time-correlated single-photon counting module for time-of-flight non-line-of-sight imaging applications

Authors: Jie Wu, Chao Yu, Jian-Wei Zeng, Chen Dai, Feihu Xu, Jun Zhang

Abstract: Single-photon time-of-flight (TOF) non-line-of-sight (NLOS) imaging enables the high-resolution reconstruction of objects outside the field of view. The compactness of TOF NLOS imaging systems, entailing the miniaturization of key components within such systems is crucial for practical applications. Here, we present a miniaturized four-channel time-correlated single-photon counting module dedicate… ▽ More Single-photon time-of-flight (TOF) non-line-of-sight (NLOS) imaging enables the high-resolution reconstruction of objects outside the field of view. The compactness of TOF NLOS imaging systems, entailing the miniaturization of key components within such systems is crucial for practical applications. Here, we present a miniaturized four-channel time-correlated single-photon counting module dedicated to TOF NLOS imaging applications. The module achieves excellent performance with a 10 ps bin size and 27.4 ps minimum root-mean-square time resolution. We present the results of TOF NLOS imaging experiment using an InGaAs/InP single-photon detector and the time-correlated single-photon counting module, and show that a 6.3 cm lateral resolution and 2.3 cm depth resolution can be achieved under the conditions of 5 m imaging distance and 1 ms pixel dwell time. △ Less

Submitted 9 March, 2024; originally announced April 2024.

Comments: Published by Review of Scientific Instrument

Journal ref: Rev. Sci. Instrum. 95, 035107 (2024)

Spatio-Temporal Fluid Dynamics Modeling via Physical-Awareness and Parameter Diffusion Guidance

Authors: Hao Wu, Fan Xu, Yifan Duan, Ziwei Niu, Weiyan Wang, Gaofeng Lu, Kun Wang, Yuxuan Liang, Yang Wang

Abstract: This paper proposes a two-stage framework named ST-PAD for spatio-temporal fluid dynamics modeling in the field of earth sciences, aiming to achieve high-precision simulation and prediction of fluid dynamics through spatio-temporal physics awareness and parameter diffusion guidance. In the upstream stage, we design a vector quantization reconstruction module with temporal evolution characteristics… ▽ More This paper proposes a two-stage framework named ST-PAD for spatio-temporal fluid dynamics modeling in the field of earth sciences, aiming to achieve high-precision simulation and prediction of fluid dynamics through spatio-temporal physics awareness and parameter diffusion guidance. In the upstream stage, we design a vector quantization reconstruction module with temporal evolution characteristics, ensuring balanced and resilient parameter distribution by introducing general physical constraints. In the downstream stage, a diffusion probability network involving parameters is utilized to generate high-quality future states of fluids, while enhancing the model's generalization ability by perceiving parameters in various physical setups. Extensive experiments on multiple benchmark datasets have verified the effectiveness and robustness of the ST-PAD framework, which showcase that ST-PAD outperforms current mainstream models in fluid dynamics modeling and prediction, especially in effectively capturing local representations and maintaining significant advantages in OOD generations. △ Less

Submitted 18 March, 2024; originally announced March 2024.

A Neural Network-Based Submesoscale Vertical Heat Flux Parameterization and Its Implementation in Regional Ocean Modeling System (ROMS)

Authors: Shuyi Zhou, Jihai Dong, Fanghua Xu, Zhiyou **g, Changming Dong

Abstract: Submesoscale processes, with spatio-temporal scales of O(0.01-10) km and hours to 1 day which are hardly resolved by current ocean models, are important sub-grid processes in ocean models. Due to the strong vertical currents, submesoscale processes can lead to submesoscale vertical heat flux (SVHF) in the upper ocean which plays a crucial role in the heat exchange between the atmosphere and the oc… ▽ More Submesoscale processes, with spatio-temporal scales of O(0.01-10) km and hours to 1 day which are hardly resolved by current ocean models, are important sub-grid processes in ocean models. Due to the strong vertical currents, submesoscale processes can lead to submesoscale vertical heat flux (SVHF) in the upper ocean which plays a crucial role in the heat exchange between the atmosphere and the ocean interior, and further modulates the global heat redistribution. At present, simulating a submesoscale-resolving ocean model is still expensive and time-consuming. Parameterizing SVHF becomes a feasible alternative by introducing it into coarse-resolution models. Traditionally, researchers tend to parameterize SVHF by a mathematically fitted relationship based on one or two key background state variables, which fail to represent the relationship between SVHF and the background state variables comprehensively. In this study, we propose a data-driven SVHF parameterization scheme based on a deep neural network and implement it into the Regional Ocean Modeling System (ROMS). In offline tests, our scheme can accurately calculate SVHF using mesoscale-averaged variables and characterize how it varies with depth. In online tests, we simulate an idealized model of an anticyclonic mesoscale eddy and a realistic model of the Gulf Stream, respectively. Compared to the coarse-resolution cases without the SVHF effect, the coarse-resolution cases with the SVHF scheme tend to reproduce results closer to the high-resolution case and the observational state in terms of the temperature structure and mixed layer depth, indicating a good performance of the neural network-based SVHF scheme. Our results show the potential of applying the neural network in parameterizing sub-grid processes in ocean models. △ Less

Submitted 7 March, 2024; originally announced March 2024.

Ultra-short lifetime isomer studies from photonuclear reactions using laser-driven ultra-intense γ-ray

Authors: Di Wu, Haoyang Lan, Jiaxing Liu, Huangang Lu, Jianyao Zhang, Jianfeng Lv, Xuezhi Wu, Hui Zhang, Yadong Xia, Qiangyou He, Jie Cai, Qianyi Ma, Yuhui Xia, Zhenan Wang, Meizhi Wang, Zhiyan Yang, Xinlu Xu, Yixing Geng, Chen Lin, Wenjun Ma, Yanying Zhao, Haoran Wang, Fulong Liu, Chuangye He, **qing Yu , et al. (7 additional authors not shown)

Abstract: Isomers, ubiquitous populations of relatively long-lived nuclear excited states, play a crucial role in nuclear physics. However, isomers with half-life times of several seconds or less barely had experimental cross section data due to the lack of a suitable measuring method. We report a method of online γ spectroscopy for ultra-short-lived isomers from photonuclear reactions using laser-driven ul… ▽ More Isomers, ubiquitous populations of relatively long-lived nuclear excited states, play a crucial role in nuclear physics. However, isomers with half-life times of several seconds or less barely had experimental cross section data due to the lack of a suitable measuring method. We report a method of online γ spectroscopy for ultra-short-lived isomers from photonuclear reactions using laser-driven ultra-intense γ-rays. The fastest time resolution can reach sub-ps level with γ-ray intensities >10^{19}/s ({\geqslant} 8 MeV). The ^{115}In(γ, n)^{114m2}In reaction (T_{1/2} = 43.1 ms) was first measured in the high-energy region which shed light on the nuclear structure studies of In element. Simulations showed it would be an efficient way to study ^{229m}Th (T_{1/2} = 7 μs), which is believed to be the next generation of nuclear clock. This work offered a unique way of gaining insight into ultra-short lifetimes and promised an effective way to fill the gap in relevant experimental data. △ Less

Submitted 23 February, 2024; originally announced February 2024.

Penetrative magneto-convection of a rotating Boussinesq flow in $f$-planes

Authors: Fan Xu, Tao Cai

Abstract: In this study, we conducted a linear instability analysis of penetrative magneto-convection in rapidly rotating Boussinesq flows within tilted f-planes, under the influence of a uniform background magnetic field. We integrated wave theory and convection theory to elucidate the penetration dynamics in rotating magneto-convection. Our findings suggest that efficient penetration in rapidly rotating f… ▽ More In this study, we conducted a linear instability analysis of penetrative magneto-convection in rapidly rotating Boussinesq flows within tilted f-planes, under the influence of a uniform background magnetic field. We integrated wave theory and convection theory to elucidate the penetration dynamics in rotating magneto-convection. Our findings suggest that efficient penetration in rapidly rotating flows with weakly stratified stable layers at low latitudes can be attributed to the resonance of wave transmission near the interface between unstable and stable layers. In the context of strongly stratified flows, we derived the scaling relationships of penetrative distances $Δ$ with the stability parameter $δ$. Our calculation shows that, for both rotation-dominated and magnetism-dominated flows, $Δ$ obeys a scaling of $Δ\sim O(δ^{-1/2})$. In rotation-dominated flows, we noted a general decrease in penetrative distance with increased rotational effect, and a minor decrease in penetrative distance with increased latitude. When a background magnetic field is introduced, we observed a significant shift in penetrative distance as the Elsasser number $Λ$ approaches one. The penetrative distance tends to decrease when $Λ\ll 1$ and increase when $Λ\gg 1$ with the rotational effect, indicating a transition from rotation-dominated to magnetism-dominated flow. We have further investigated the impact of the background magnetic field when it is not aligned with the rotational axis. This presents a notable contrast to the case where the magnetic field is parallel to the rotational axis. △ Less

Submitted 21 February, 2024; originally announced February 2024.

Comments: This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in F. Xu and T. Cai, Physics of Fluids, 36, 026609 (2024), and may be found at https://doi.org/10.1063/5.0191370

Journal ref: Physics of Fluids, 36, 026609 (2024)

Valley-dependent Multiple Quantum States and Topological Transitions in Germanene-based Ferromagnetic van der Waals Heterostructures

Authors: Feng Xue, Jiaheng Li, Yizhou Liu, Ruqian Wu, Yong Xu, Wenhui Duan

Abstract: Topological and valleytronic materials are promising for spintronic and quantum applications due to their unique properties. Using first principles calculations, we demonstrate that germanene (Ge)-based ferromagnetic heterostructures can exhibit multiple quantum states such as quantum anomalous Hall effect (QAHE) with Chern numbers of C=-1 or C=-2, quantum valley Hall effect (QVHE) with a valley C… ▽ More Topological and valleytronic materials are promising for spintronic and quantum applications due to their unique properties. Using first principles calculations, we demonstrate that germanene (Ge)-based ferromagnetic heterostructures can exhibit multiple quantum states such as quantum anomalous Hall effect (QAHE) with Chern numbers of C=-1 or C=-2, quantum valley Hall effect (QVHE) with a valley Chern number of C$v$=2, valley-polarized quantum anomalous Hall effect (VP-QAHE) with two Chern numbers of C=-1 and C$v$=-1 as well as time-reversal symmetry broken quantum spin Hall effect (T-broken QSHE) with a spin Chern number of C$s$~1. Furthermore, we find that the transitions between different quantum states can occur by changing the magnetic orientation of ferromagnetic layers through applying a magnetic field. Our discovery provides new routes and novel material platforms with a unique combination of diverse properties that make it well suitable for applications in electronics, spintronics and valley electronics. △ Less

Submitted 8 February, 2024; originally announced February 2024.

Comments: 15 pages, 3 figures

Vanishing of the anomalous Hall effect and enhanced carrier mobility in the spin-gapless ferromagnetic Mn2CoGa1-xAlx alloys

Authors: Cheng Zhang, Shuang Pan, Peihao Wang, Yuchen Men, Xiang Li, Yuqing Bai, Li Tang, Feng Xu, Guizhou Xu

Abstract: Spin gapless semiconductor (SGS) has attracted long attention since its theoretical prediction, while concrete experimental hints are still lack in the relevant Heusler alloys. Here in this work, by preparing the series alloys of Mn2CoGa1-xAlx (x=0, 0.25, 0.5, 0.75 and 1), we identified the vanishing of anomalous Hall effect in the ferromagnetic Mn2CoGa (or x=0.25) alloy in a wide temperature inte… ▽ More Spin gapless semiconductor (SGS) has attracted long attention since its theoretical prediction, while concrete experimental hints are still lack in the relevant Heusler alloys. Here in this work, by preparing the series alloys of Mn2CoGa1-xAlx (x=0, 0.25, 0.5, 0.75 and 1), we identified the vanishing of anomalous Hall effect in the ferromagnetic Mn2CoGa (or x=0.25) alloy in a wide temperature interval, accompanying with growing contribution from the ordinary Hall effect. As a result, comparatively low carrier density (1020 cm-3) and high carrier mobility (150 cm2/Vs) are obtained in Mn2CoGa (or x=0.25) alloy in the temperature range of 10-200K. These also lead to a large dip in the related magnetoresistance at low fields. While in high Al content, despite the magnetization behavior is not altered significantly, the Hall resistivity is instead dominated by the anomalous one, just analogous to that widely reported in Mn2CoAl. The distinct electrical transport behavior of x=0 and x=0.75 (or 1) is presently understood by their possible different scattering mechanism of the anomalous Hall effect due to the differences in atomic order and conductivity. Our work can expand the existing understanding of the SGS properties and offer a better SGS candidate with higher carrier mobility that can facilitate the application in the spin-injected related devices. △ Less

Submitted 30 November, 2023; originally announced November 2023.

Journal ref: J. Appl. Phys. 134, 173902 (2023)

Direct reduction of iron-ore with hydrogen in fluidized beds: A coarse-grained CFD-DEM-IBM study

Authors: Bin Lan, Ji Xu, Shuai Lu, Yige Liu, Fan Xu, Bidan Zhao, Zheng Zou, Ming Zhai, Junwu Wang

Abstract: Hydrogen metallurgy technology uses hydrogen as the reducing agent instead of carbon reduction, which is one of the important ways to reduce carbon dioxide emissions and ensure the green and sustainable development of iron and steel industry. Due to the advantages of high gas-solid contact efficiency and outstanding mass and heat transfer, direct reduction of iron ore in fluidized beds has attract… ▽ More Hydrogen metallurgy technology uses hydrogen as the reducing agent instead of carbon reduction, which is one of the important ways to reduce carbon dioxide emissions and ensure the green and sustainable development of iron and steel industry. Due to the advantages of high gas-solid contact efficiency and outstanding mass and heat transfer, direct reduction of iron ore in fluidized beds has attracted much attention. In this study, a coarse-grained CFD-DEM-IBM solver based on hybrid CPU-GPU computing is developed to simulate the direct reduction process of two kinds of iron ore with hydrogen in fluidized beds, where an unreacted shrinking core model based on multiple reaction paths is used to model the reduction reactions, a coarse-grained model and multiple GPUs enable the significant acceleration of particle computation, and the immersed boundary method (IBM) enables the use of simple mesh even in complex geometries of reactors. The predicted results of particle reduction degree are in good agreement with the experimental values, which proves the correctness of the CFD-DEM-IBM solver. In addition, the effects of reaction kinetic parameters and operating temperature on particle reduction degree are also investigated. Present study provides a method for digital design, optimization and scale-up of ironmaking reactors. △ Less

Submitted 7 November, 2023; originally announced November 2023.

Direct numerical simulation of Taylor-Couette flow with vertical asymmetric rough walls

Authors: Fan Xu, **ghong Su, Bin Lan, Peng Zhao, Yurong He, Chao Sun, Junwu Wang

Abstract: Direct numerical simulations are performed to explore the effects of rotating direction of the vertical asymmetric rough wall on the transport properties of Taylor-Couette (TC) flow up to a Taylor number of $\textit{Ta} = 2.39 \times 10^7$. It is shown that compared to the smooth wall, the rough wall with vertical asymmetric strips can enhance the dimensionless torque \textit{Nu}$_ω$, and more imp… ▽ More Direct numerical simulations are performed to explore the effects of rotating direction of the vertical asymmetric rough wall on the transport properties of Taylor-Couette (TC) flow up to a Taylor number of $\textit{Ta} = 2.39 \times 10^7$. It is shown that compared to the smooth wall, the rough wall with vertical asymmetric strips can enhance the dimensionless torque \textit{Nu}$_ω$, and more importantly, at high \textit{Ta} clockwise rotation of the inner rough wall (the fluid is sheared by the steeper slope side of the strips) results in a significantly bigger torque enhancement as compared to the counter-clockwise rotation (the fluid is sheared by the smaller slope side of the strips) due to the larger convective contribution to the angular velocity flux, although the rotating direction has a negligible effect on the torque at low \textit{Ta}. The larger torque enhancement caused by the clockwise rotation of vertical asymmetric rough wall at high \textit{Ta} is then explained by the stronger coupling between the rough wall and the bulk due to the larger biased azimuthal velocity towards the rough wall at the mid-gap of TC system, the increased intensity of turbulence manifesting by larger Reynolds stress and thinner boundary layer, and the more significant contribution of the pressure force on the surface of rough wall to the torque. △ Less

Submitted 18 October, 2023; v1 submitted 17 October, 2023; originally announced October 2023.

Comments: 17 pages,11 figures

How enlightened self-interest guided global vaccine sharing benefits all: a modelling study

Authors: Zhenyu Han, Qianyue Hao, Qiwei He, Katherine Budeski, Depeng **, Fengli Xu, Kun Tang

Abstract: Background: Despite the consensus that vaccines play an important role in combating the global spread of infectious diseases, vaccine inequity is still rampant with deep-seated mentality of self-priority. This study aims to evaluate the existence and possible outcomes of a more equitable global vaccine distribution and explore a concrete incentive mechanism that promotes vaccine equity. Methods: W… ▽ More Background: Despite the consensus that vaccines play an important role in combating the global spread of infectious diseases, vaccine inequity is still rampant with deep-seated mentality of self-priority. This study aims to evaluate the existence and possible outcomes of a more equitable global vaccine distribution and explore a concrete incentive mechanism that promotes vaccine equity. Methods: We design a metapopulation epidemiological model that simultaneously considers global vaccine distribution and human mobility, which is then calibrated by the number of infections and real-world vaccination records during COVID-19 pandemic from March 2020 to July 2021. We explore the possibility of the enlightened self-interest incentive mechanism, i.e., improving one's own epidemic outcomes by sharing vaccines with other countries, by evaluating the number of infections and deaths under various vaccine sharing strategies using the proposed model. To understand how these strategies affect the national interests, we distinguish the imported and local cases for further cost-benefit analyses that rationalize the enlightened self-interest incentive mechanism behind vaccine sharing. ... △ Less

Submitted 13 October, 2023; originally announced October 2023.

Comments: Accepted by Journal of Global Health

Numerical study on the mechanism of drag modulation by dispersed drops in two-phase Taylor-Couette turbulence

Authors: **ghong Su, Lei Yi, Bidan Zhao, Cheng Wang, Fan Xu, Junwu Wang, Chao Sun

Abstract: The presence of a dispersed phase can significantly modulate the drag in turbulent systems. We derived a conserved quantity that characterizes the radial transport of azimuthal momentum in the fluid-fluid two-phase Taylor-Couette turbulence. This quantity consists of contributions from advection, diffusion, and two-phase interface, which are closely related to density, viscosity, and interfacial t… ▽ More The presence of a dispersed phase can significantly modulate the drag in turbulent systems. We derived a conserved quantity that characterizes the radial transport of azimuthal momentum in the fluid-fluid two-phase Taylor-Couette turbulence. This quantity consists of contributions from advection, diffusion, and two-phase interface, which are closely related to density, viscosity, and interfacial tension, respectively. We found that the presence of the two-phase interface consistently produces a positive contribution to the momentum transport and leads to drag enhancement, while decreasing the density and viscosity ratios of the dispersed phase to the continuous phase reduces the contribution of local advection and diffusion terms to the momentum transport, respectively, resulting in drag reduction. Therefore, we concluded that the decreased density ratio and the decreased viscosity ratio work together to compete with the presence of two-phase interface for achieving drag modulation in fluid-fluid two-phase turbulence. △ Less

Submitted 19 February, 2024; v1 submitted 12 October, 2023; originally announced October 2023.

Cross-tokamak Disruption Prediction based on Physics-Guided Feature Extraction and domain adaptation

Authors: Chengshuo Shen, Wei Zheng, Bihao Guo, Yonghua Ding, Dalong Chen, Xinkun Ai, Fengming Xue, Yu Zhong, Nengchao Wang, Biao Shen, Binjia Xiao, Zhongyong Chen, Yuan Pan, J-TEXT team

Abstract: The high acquisition cost and the significant demand for disruptive discharges for data-driven disruption prediction models in future tokamaks pose an inherent contradiction in disruption prediction research. In this paper, we demonstrated a novel approach to predict disruption in a future tokamak using only a few discharges. The first step is to use the existing understanding of physics to extrac… ▽ More The high acquisition cost and the significant demand for disruptive discharges for data-driven disruption prediction models in future tokamaks pose an inherent contradiction in disruption prediction research. In this paper, we demonstrated a novel approach to predict disruption in a future tokamak using only a few discharges. The first step is to use the existing understanding of physics to extract physics-guided features from the diagnostic signals of each tokamak, called physics-guided feature extraction (PGFE). The second step is to align a few data from the future tokamak (target domain) and a large amount of data from existing tokamak (source domain) based on a domain adaptation algorithm called CORrelation ALignment (CORAL). It is the first attempt at applying domain adaptation in the task of disruption prediction. PGFE has been successfully applied in J-TEXT to predict disruption with excellent performance. PGFE can also reduce the data volume requirements due to extracting the less device-specific features, thereby establishing a solid foundation for cross-tokamak disruption prediction. We have further improved CORAL (supervised CORAL, S-CORAL) to enhance its appropriateness in feature alignment for the disruption prediction task. To simulate the existing and future tokamak case, we selected J-TEXT as the existing tokamak and EAST as the future tokamak, which has a large gap in the ranges of plasma parameters. The utilization of the S-CORAL improves the disruption prediction performance on future tokamak. Through interpretable analysis, we discovered that the learned knowledge of the disruption prediction model through this approach exhibits more similarities to the model trained on large data volumes of future tokamak. △ Less

Submitted 1 November, 2023; v1 submitted 11 September, 2023; originally announced September 2023.

Comments: 17 pages, 9 figures

Critical transitions on route to chaos of natural convection on a heated horizontal circular surface

Authors: Yuhan Jiang, Yongling Zhao, Jan Carmeliet, Bingchuan Nie, Feng Xu

Abstract: The transition route and bifurcations of the buoyant flow develo** on a heated circular horizontal surface are elaborated using direct numerical simulations and direct stability analysis. A series of bifurcations, as a function of Rayleigh numbers (Ra) ranging from $10^1$ to $6\times10^7$, are found on the route to the chaos of the flow at $Pr=7$. When $Ra<1.0\times10^3$, the buoyant flow above… ▽ More The transition route and bifurcations of the buoyant flow develo** on a heated circular horizontal surface are elaborated using direct numerical simulations and direct stability analysis. A series of bifurcations, as a function of Rayleigh numbers (Ra) ranging from $10^1$ to $6\times10^7$, are found on the route to the chaos of the flow at $Pr=7$. When $Ra<1.0\times10^3$, the buoyant flow above the heated horizontal surface is dominated by conduction, because of which distinct thermal boundary layer and plume are not present. At $Ra=1.1\times10^6$, a Hopf bifurcation occurs, resulting in the flow transition from a steady state to a periodic puffing state. As Ra increases further, the flow enters a periodic rotating state at $Ra=1.9\times10^6$, which is a unique state that was rarely discussed in the literature. These critical transitions, leaving from a steady state and subsequently entering a series of periodic states (puffing, rotating, flap** and doubling) and finally leading to chaos, are diagnosed using spectral analysis and two-dimensional Fourier Transform (2DFT). Moreover, direct stability analysis is conducted by introducing random numerical perturbations into the boundary condition of the surface heating. We find that when the state of a flow is in the vicinity of bifurcation points (e.g., $Ra=2.0\times10^6$), the flow is conditionally unstable to perturbations, and it can bifurcate from the rotating state to the flap** state in advance. However, for relatively stable flow states, such as at $Ra=1.5\times10^6$, the flow remains its periodic puffing state even though it is being perturbed. △ Less

Submitted 22 August, 2023; originally announced August 2023.

Super-resolution enabled widefield quantum diamond microscopy

Authors: Feng Xu, Jialong Chen, Yong Hou, Juan Cheng, Tony KC Hui, Shih-Chi Chen, Zhiqin Chu

Abstract: Widefield quantum diamond microscopy (WQDM) based on Kohler-illumination has been widely adopted in the field of quantum sensing, however, practical applications are still limited by issues such as unavoidable photodamage and unsatisfied spatial-resolution. Here, we design and develop a super-resolution enabled WQDM using a digital micromirror device (DMD)-based structured illumination microscopy.… ▽ More Widefield quantum diamond microscopy (WQDM) based on Kohler-illumination has been widely adopted in the field of quantum sensing, however, practical applications are still limited by issues such as unavoidable photodamage and unsatisfied spatial-resolution. Here, we design and develop a super-resolution enabled WQDM using a digital micromirror device (DMD)-based structured illumination microscopy. With the rapidly programmable illumination patterns, we have firstly demonstrated how to mitigate phototoxicity when imaging nanodiamonds in cell samples. As a showcase, we have performed the super-resolved quantum sensing measurements of two individual nanodiamonds not even distinguishable with conventional WQDM. The DMD-powered WQDM presents not only excellent compatibility with quantum sensing solutions, but also strong advantages in high imaging speed, high resolution, low phototoxicity, and enhanced signal-to-background ratio, making it a competent tool to for applications in demanding fields such as biomedical science. △ Less

Submitted 27 July, 2023; originally announced July 2023.

Comments: 21 pages, 5 figures

Transition of the thermal boundary layer and plume over an isothermal section-triangular roof: An experimental study

Authors: Haoyu Zhai, Juan F. Torres, Yongling Zhao, Feng Xu

Abstract: The development of thermal boundary layers and plume near a section-triangular roof under different isothermal heating conditions is experimentally investigated using phase-shifting interferometry and thermocouple measurements. The spatially averaged temperature contours are visualized for the Rayleigh number varying from $10^3$ to $4 \times 10^6$. The measurements reveal a flow transition in the… ▽ More The development of thermal boundary layers and plume near a section-triangular roof under different isothermal heating conditions is experimentally investigated using phase-shifting interferometry and thermocouple measurements. The spatially averaged temperature contours are visualized for the Rayleigh number varying from $10^3$ to $4 \times 10^6$. The measurements reveal a flow transition in the steady-state regime from conduction dominance to convection dominance, finally transitioning to a periodic flow regime with an increase in the Rayleigh number. The temperature series of the monitoring points reveal that the flow has a complex bifurcation route containing an inverse period bifurcation and an inverse quasi-periodic bifurcation. The oscillation of the flow depending on the Rayleigh number is also quantitatively and qualitatively described. △ Less

Submitted 18 July, 2023; originally announced July 2023.

Ultraviolet photon-counting single-pixel imaging

Authors: Jun-Tian Ye, Chao Yu, Wenwen Li, Zheng-** Li, Hai Lu, Rong Zhang, Jun Zhang, Feihu Xu, Jian-Wei Pan

Abstract: We demonstrate photon-counting single-pixel imaging in the ultraviolet region. Toward this target, we develop a high-performance compact single-photon detector based on a 4H-SiC single-photon avalanche diode (SPAD), where a tailored readout circuit with active hold-off time is designed to restrain detector noise and operate the SPAD in free-running mode. We use structured illumination to reconstru… ▽ More We demonstrate photon-counting single-pixel imaging in the ultraviolet region. Toward this target, we develop a high-performance compact single-photon detector based on a 4H-SiC single-photon avalanche diode (SPAD), where a tailored readout circuit with active hold-off time is designed to restrain detector noise and operate the SPAD in free-running mode. We use structured illumination to reconstruct 192$\times$192 compressed images at a 4 fps frame rate. To show the superior capability of ultraviolet characteristics, we use our single-pixel imaging system to identify and distinguish different transparent objects under low-intensity irradiation, and image ultraviolet light sources. The results provide a practical solution for general ultraviolet imaging applications. △ Less

Submitted 28 June, 2023; originally announced June 2023.

Comments: 5 pages, 5 figures, accepted for publication in Applied Physics Letters

Journal ref: Appl. Phys. Lett. 123, 024005 (2023)

High-precision and low-latency widefield diamond quantum sensing with neuromorphic vision sensors

Authors: Zhiyuan Du, Madhav Gupta, Feng Xu, Kai Zhang, Jiahua Zhang, Yan Zhou, Yiyao Liu, Zhenyu Wang, Jorg Wrachtrup, Ngai Wong, Can Li, Zhiqin Chu

Abstract: During the past decade, interest has grown significantly in develo** ultrasensitive widefield diamond magnetometry for various applications. Despite attempts to improve the adoption of conventional frame-based sensors, achieving high temporal resolution and sensitivity simultaneously remains a key challenge. This is largely due to the transfer and processing of massive amounts of sensor data to… ▽ More During the past decade, interest has grown significantly in develo** ultrasensitive widefield diamond magnetometry for various applications. Despite attempts to improve the adoption of conventional frame-based sensors, achieving high temporal resolution and sensitivity simultaneously remains a key challenge. This is largely due to the transfer and processing of massive amounts of sensor data to capture the widefield fluorescence intensity changes of spin defects in diamonds. In this study, we adopt a neuromorphic vision sensor to address this issue. This sensor pre-processes the detected signals in optically detected magnetic resonance (ODMR) measurements for quantum sensing, employing a working principle that closely resembles the operation of the human vision system. By encoding the changes of light intensity into spikes, this approach results in a vast dynamic range, high temporal resolution, and exceptional signal-to-background ratio. After a thorough evaluation of theoretical feasibility, our experiment with an off-the-shelf event camera demonstrated a 13x improvement in temporal resolution with comparable precision of detecting ODMR resonance frequencies compared with the state-of-the-art highly specialized frame-based approach. A specialized camera system with the same mechanism has the potential to enhance these benefits further. This performance improvement is primarily attributable to orders of magnitude smaller data volumes and, thus, reduced latency. We further showcase the deployment of this technology in monitoring dynamically modulated laser heating of gold nanoparticles coated on a diamond surface, a recognizably difficult task using existing approaches. The current development provides new insights for high-precision and low-latency widefield quantum sensing, with possibilities for integration with emerging memory devices for more efficient event-based data processing. △ Less

Submitted 24 June, 2023; originally announced June 2023.

Comments: 21 pages, 4 figures

The Lobster Eye Imager for Astronomy Onboard the SATech-01 Satellite

Authors: Z. X. Ling, X. J. Sun, C. Zhang, S. L. Sun, G. **, S. N. Zhang, X. F. Zhang, J. B. Chang, F. S. Chen, Y. F. Chen, Z. W. Cheng, W. Fu, Y. X. Han, H. Li, J. F. Li, Y. Li, Z. D. Li, P. R. Liu, Y. H. Lv, X. H. Ma, Y. J. Tang, C. B. Wang, R. J. Xie, Y. L. Xue, A. L. Yan , et al. (101 additional authors not shown)

Abstract: The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (Fo… ▽ More The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (FoV) of 346 square degrees (18.6 degrees * 18.6 degrees) of the X-ray imager is realized. An optical assembly composed of 36 MPO chips is used to focus incident X-ray photons, and four large-format complementary metal-oxide semiconductor (CMOS) sensors, each of 6 cm * 6 cm, are used as the focal plane detectors. The instrument has an angular resolution of 4 - 8 arcmin (in FWHM) for the central focal spot of the point spread function, and an effective area of 2 - 3 cm2 at 1 keV in essentially all the directions within the field of view. The detection passband is 0.5 - 4 keV in the soft X-rays and the sensitivity is 2 - 3 * 10-11 erg s-1 cm-2 (about 1 mini-Crab) at 1,000 second observation. The total weight of LEIA is 56 kg and the power is 85 W. The satellite, with a design lifetime of 2 years, operates in a Sun-synchronous orbit of 500 km with an orbital period of 95 minutes. LEIA is paving the way for future missions by verifying in flight the technologies of both novel focusing imaging optics and CMOS sensors for X-ray observation, and by optimizing the working setups of the instrumental parameters. In addition, LEIA is able to carry out scientific observations to find new transients and to monitor known sources in the soft X-ray band, albeit limited useful observing time available. △ Less

Submitted 24 May, 2023; originally announced May 2023.

Comments: Accepted by RAA

A three-dimensional MR-STAT protocol for high-resolution multi-parametric quantitative MRI

Authors: Hongyan Liu, Oscar van der Heide, Edwin Versteeg, Martijn Froeling, Miha Fuderer, Fei Xu, Cornelis A. T. van den Berg, Alessandro Sbrizzi

Abstract: Magnetic Resonance Spin Tomography in Time-Domain (MR-STAT) is a multiparametric quantitative MR framework, which allows for simultaneously acquiring quantitative tissue parameters such as T1, T2 and proton density from one single short scan. A typical 2D MR-STAT acquisition uses a gradient-spoiled, gradient-echo sequence with a slowly varying RF flip-angle train and Cartesian readouts, and the qu… ▽ More Magnetic Resonance Spin Tomography in Time-Domain (MR-STAT) is a multiparametric quantitative MR framework, which allows for simultaneously acquiring quantitative tissue parameters such as T1, T2 and proton density from one single short scan. A typical 2D MR-STAT acquisition uses a gradient-spoiled, gradient-echo sequence with a slowly varying RF flip-angle train and Cartesian readouts, and the quantitative tissue maps are reconstructed by an iterative, model-based optimization algorithm. In this work, we design a 3D MR-STAT framework based on previous 2D work, in order to achieve better image SNR, higher though-plan resolution and better tissue characterization. Specifically, we design a 7-minute, high-resolution 3D MR-STAT sequence, and the corresponding two-step reconstruction algorithm for the large-scale dataset. To reduce the long acquisition time, Cartesian undersampling strategies such as SENSE are adopted in our transient-state quantitative framework. To reduce the computational burden, a data splitting scheme is designed for decoupling the 3D reconstruction problem into independent 2D reconstructions. The proposed 3D framework is validated by numerical simulations, phantom experiments and in-vivo experiments. High-quality knee quantitative maps with 0.8 x 0.8 x 1.5mm3 resolution and bilateral lower leg maps with 1.6mm isotropic resolution can be acquired using the proposed 7-minute acquisition sequence and the 3-minute-per-slice decoupled reconstruction algorithm. The proposed 3D MR-STAT framework could have wide clinical applications in the future. △ Less

Submitted 22 May, 2023; originally announced May 2023.

Journal ref: NMR Biomed. 2023. e5050

STCF Conceptual Design Report: Volume 1 -- Physics & Detector

Authors: M. Achasov, X. C. Ai, R. Aliberti, L. P. An, Q. An, X. Z. Bai, Y. Bai, O. Bakina, A. Barnyakov, V. Blinov, V. Bobrovnikov, D. Bodrov, A. Bogomyagkov, A. Bondar, I. Boyko, Z. H. Bu, F. M. Cai, H. Cai, J. J. Cao, Q. H. Cao, Z. Cao, Q. Chang, K. T. Chao, D. Y. Chen, H. Chen , et al. (413 additional authors not shown)

Abstract: The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII,… ▽ More The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII, providing a unique platform for exploring the asymmetry of matter-antimatter (charge-parity violation), in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions, as well as searching for exotic hadrons and physics beyond the Standard Model. The STCF project in China is under development with an extensive R\&D program. This document presents the physics opportunities at the STCF, describes conceptual designs of the STCF detector system, and discusses future plans for detector R\&D and physics case studies. △ Less

Submitted 5 October, 2023; v1 submitted 28 March, 2023; originally announced March 2023.

Journal ref: Front. Phys. 19(1), 14701 (2024)

The JUNO experiment Top Tracker

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato , et al. (592 additional authors not shown)

Abstract: The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector… ▽ More The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector, covering about 60% of the surface above them. The JUNO Top Tracker is constituted by the decommissioned OPERA experiment Target Tracker modules. The technology used consists in walls of two planes of plastic scintillator strips, one per transverse direction. Wavelength shifting fibres collect the light signal emitted by the scintillator strips and guide it to both ends where it is read by multianode photomultiplier tubes. Compared to the OPERA Target Tracker, the JUNO Top Tracker uses new electronics able to cope with the high rate produced by the high rock radioactivity compared to the one in Gran Sasso underground laboratory. This paper will present the new electronics and mechanical structure developed for the Top Tracker of JUNO along with its expected performance based on the current detector simulation. △ Less

Submitted 9 March, 2023; originally announced March 2023.

Comments: 20 pages

Journal ref: Nucl.Instrum.Meth.A 1057 (2023) 168680

JUNO sensitivity to $^7$Be, $pep$, and CNO solar neutrinos

Authors: Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Marco Beretta , et al. (592 additional authors not shown)

Abstract: The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented… ▽ More The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented levels of precision. In this paper, we provide estimation of the JUNO sensitivity to 7Be, pep, and CNO solar neutrinos that can be obtained via a spectral analysis above the 0.45 MeV threshold. This study is performed assuming different scenarios of the liquid scintillator radiopurity, ranging from the most opti mistic one corresponding to the radiopurity levels obtained by the Borexino experiment, up to the minimum requirements needed to perform the neutrino mass ordering determination with reactor antineutrinos - the main goal of JUNO. Our study shows that in most scenarios, JUNO will be able to improve the current best measurements on 7Be, pep, and CNO solar neutrino fluxes. We also perform a study on the JUNO capability to detect periodical time variations in the solar neutrino flux, such as the day-night modulation induced by neutrino flavor regeneration in Earth, and the modulations induced by temperature changes driven by helioseismic waves. △ Less

Submitted 7 March, 2023; originally announced March 2023.

Advanced Analytics on 3D X-ray Tomography of Irradiated Silicon Carbide Claddings

Authors: Fei Xu, Joshua J. Kane, Peng Xu, Jason L. Schulthess, Sean Gonderman, Nikolaus L. Cordesa

Abstract: Silicon Carbide (SiC) ceramic matrix composite (CMC) cladding is currently being pursued as one of the leading candidates for accident-tolerant fuels. To enable an improved understanding of SiC-SiC composite performance, the development of non-destructive evaluation techniques to assess critical defects is needed. Three-dimensional (3D) X-ray imaging, also referred to as X-ray computed tomography… ▽ More Silicon Carbide (SiC) ceramic matrix composite (CMC) cladding is currently being pursued as one of the leading candidates for accident-tolerant fuels. To enable an improved understanding of SiC-SiC composite performance, the development of non-destructive evaluation techniques to assess critical defects is needed. Three-dimensional (3D) X-ray imaging, also referred to as X-ray computed tomography (CT), is a non-destructive, data-rich characterization technique that can provide surface and subsurface spatial information. This paper discusses the design and implementation of a fully automatic workflow to detect and analyze SiC-SiC defects using image processing techniques on 3D X-ray images. The workflow consists of four processing blocks, including data preparation, void/crack detection, visualization, and analysis. In this work, three SiC samples (two irradiated and one unirradiated) provided by General Atomics are investigated. The irradiated samples were exposed in a way that was expected to induce cracking, and indeed, the automated workflow developed in this work was able to successfully identify and characterize the crack formation in the irradiated samples while detecting no observed cracking in the unirradiated sample. These results demonstrate the value of automated XCT tools to better understand the damage and damage propagation in SiC-SiC structures for nuclear applications. △ Less

Submitted 5 March, 2023; originally announced March 2023.

Comments: 10 figures, 4 tables, 17 pages

Molecular dynamics simulation of the transformation of Fe-Co alloy by machine learning force field based on atomic cluster expansion

Authors: Yongle Li, Feng Xu, Long Hou, Luchao Sun, Haijun Su, Xi Li, Wei Ren

Abstract: The force field describing the calculated interaction between atoms or molecules is the key to the accuracy of many molecular dynamics (MD) simulation results. Compared with traditional or semi-empirical force fields, machine learning force fields have the advantages of faster speed and higher precision. We have employed the method of atomic cluster expansion (ACE) combined with first-principles d… ▽ More The force field describing the calculated interaction between atoms or molecules is the key to the accuracy of many molecular dynamics (MD) simulation results. Compared with traditional or semi-empirical force fields, machine learning force fields have the advantages of faster speed and higher precision. We have employed the method of atomic cluster expansion (ACE) combined with first-principles density functional theory (DFT) calculations for machine learning, and successfully obtained the force field of the binary Fe-Co alloy. Molecular dynamics simulations of Fe-Co alloy carried out using this ACE force field predicted the correct phase transition range of Fe-Co alloy. △ Less

Submitted 1 March, 2023; originally announced March 2023.

Comments: 17 pages, 6 figures

Free-running 4H-SiC single-photon detector with ultralow afterpulse probability at 266 nm

Authors: Chao Yu, Tianyi Li, Xian-Song Zhao, Hai Lu, Rong Zhang, Feihu Xu, Jun Zhang, Jian-Wei Pan

Abstract: Ultraviolet single-photon detector (UVSPD) provides a key tool for the applications requiring ultraweak light detection in the wavelength band. Here, we report a 4H-SiC single-photon avalanche diode (SPAD) based free-running UVSPD with ultralow afterpulse probability. We design and fabricate the 4H-SiC SPAD with a beveled mesa structure, which exhibits the characteristic of ultralow dark current.… ▽ More Ultraviolet single-photon detector (UVSPD) provides a key tool for the applications requiring ultraweak light detection in the wavelength band. Here, we report a 4H-SiC single-photon avalanche diode (SPAD) based free-running UVSPD with ultralow afterpulse probability. We design and fabricate the 4H-SiC SPAD with a beveled mesa structure, which exhibits the characteristic of ultralow dark current. We further develop a readout circuit of passive quenching and active reset with tunable hold-off time setting to considerably suppress the afterpulsing effect. The nonuniformity of photon detection efficiency (PDE) across the SPAD active area with a diameter of $\sim$ 180 $μ$m is investigated for performance optimization. The compact UVSPD is then characterized, exhibiting a typical performance of 10.3% PDE, 133 kcps dark count rate and 0.3% afterpulse probability at 266 nm. Such performance indicates that the compact UVSPD could be used for practical ultraviolet photon-counting applications △ Less

Submitted 19 February, 2023; originally announced February 2023.

Comments: 5 pages, 5 figures, accepted for publication in Review of Scientific Instruments

Journal ref: Review of Scientific Instruments 94, 033101 (2023)

Ultra-conformable Liquid Metal Particle Monolayer on Air/water Interface for Substrate-free E-tattoo

Authors: Fali Li, Wenjuan Lei, Yuwei Wang, Xingjian Lu, Shengbin Li, Feng Xu, Zidong He, **yun Liu, Huali Yang, Yuanzhao Wu, Jie Shang, Yiwei Liu, Run-Wei Li

Abstract: Gallium-based liquid metal is getting increased attention in conformal flexible electronics for its high electrical conductivity, intrinsic deformability and biocompatibility. A series of flexible devices are developed based on the micro-particles of liquid metal. But it is still challenging to fabricate conformal liquid metal film with a large area and high uniformity. Interfacial self-assembly i… ▽ More Gallium-based liquid metal is getting increased attention in conformal flexible electronics for its high electrical conductivity, intrinsic deformability and biocompatibility. A series of flexible devices are developed based on the micro-particles of liquid metal. But it is still challenging to fabricate conformal liquid metal film with a large area and high uniformity. Interfacial self-assembly is a competitive candidate method. Traditional interfacial self-assembly methods have difficulties assembling liquid metal particles because the floating state of the high-density microparticles could be easily disturbed by gravity. Here, we realized the multi-size universal self-assembly (MUS) for liquid metal particles with various diameters (0~500μm). By introducing a simple z-axis undisturbed interfacial material releasing strategy, the interference of gravitational energy on the stability of floating particles is avoided. Benefits from this, the ultra-conformable monolayer film, with large area (>100 cm2) and high floating yield (50%~90%), can be fabricated by liquid metal particles. Furthermore, the monolayer can be conformally transferred to any interesting complex surface such as human skin and plant leaf, to fabricate substrate-free flexible devices. Without interference from the mechanical response of traditional substrate, the liquid metal e-tattoo is more user-friendly and can realize feel-less continuous monitoring. △ Less

Submitted 20 February, 2023; originally announced February 2023.

Research of radon diffusion behavior in liquid scintillator

Authors: Z. F. Xu, C. Guo, J. C. Liu, Y. P. Zhang, P. Zhang, C. G. Yang, Q. Tang, Y. Liu, C. Li, T. Y. Guan

Abstract: The background caused by radon and its daughters is an important background in the low background liquid scintillator (LS) detectors. The study of the diffusion behaviour of radon in the LS contributes to the analysis of the related background caused by radon. Methodologies and devices for measuring the diffusion coefficient and solubility of radon in materials are developed and described. The rad… ▽ More The background caused by radon and its daughters is an important background in the low background liquid scintillator (LS) detectors. The study of the diffusion behaviour of radon in the LS contributes to the analysis of the related background caused by radon. Methodologies and devices for measuring the diffusion coefficient and solubility of radon in materials are developed and described. The radon diffusion coefficient of the LS was measured for the first time and in addition the solubility coefficient was also obtained. In addition, the radon diffusion coefficient of the polyolefine film which is consistent with data in the literature was measured to verify the reliability of the diffusion device. △ Less

Submitted 28 January, 2023; v1 submitted 17 January, 2023; originally announced January 2023.

Comments: 9 pages, 7 figures

System upgrade for $μ$Bq/m$^3$ level $^{222}$Rn concentration measurement

Authors: Y. Liu, Y. P. Zhang, J. C. Liu, C. Guo, C. G. Yang. P. Zhang, Q. Tang, Z. F. Xu, C. Li, T. Y. Guan, S. B. Wang

Abstract: The Jiangmen Underground Neutrino Observatory (JUNO), a 20 kton multipurpose underground liquid scintillator detector, was proposed for the determination of the neutrino mass hierarchy as primary physics goal. The central detector will be submerged in a water Cherenkov detector to lower the background from the environment and cosmic muons. Radon is one of the primary background sources. Nitrogen w… ▽ More The Jiangmen Underground Neutrino Observatory (JUNO), a 20 kton multipurpose underground liquid scintillator detector, was proposed for the determination of the neutrino mass hierarchy as primary physics goal. The central detector will be submerged in a water Cherenkov detector to lower the background from the environment and cosmic muons. Radon is one of the primary background sources. Nitrogen will be used in several sub-systems, and a highly sensitive radon detector has to be developed to measure its radon concentration. A system has been developed based on $^{222}$Rn enrichment of activated carbon and $^{222}$Rn detection based on the electrostatic collection. This paper presents the detail of a $μ$Bq/m$^3$ level $^{222}$Rn concentration measurement system and gives detailed information about how the adsorption coefficient was measured and how the temperature, flow rate, and $^{222}$Rn concentration affect the adsorption coefficient. △ Less

Submitted 24 September, 2023; v1 submitted 3 January, 2023; originally announced January 2023.

Comments: 18 pages, 9 figures

Tunable Quantum Anomalous Hall Effects in Ferromagnetic van der Waals Heterostructures

Authors: Feng Xue, Yusheng Hou, Zhe Wang, Zhiming Xu, Ke He, Ruqian Wu, Yong Xu, Wenhui Duan

Abstract: The quantum anomalous Hall effect (QAHE) has unique advantages in topotronic applications, but it is still challenging to realize the QAHE with tunable magnetic and topological properties for building functional devices. Through systematic first-principles calculations, we predict that the in-plane magnetization induced QAHE with Chern numbers C = $\pm$1 and the out-of-plane magnetization induced… ▽ More The quantum anomalous Hall effect (QAHE) has unique advantages in topotronic applications, but it is still challenging to realize the QAHE with tunable magnetic and topological properties for building functional devices. Through systematic first-principles calculations, we predict that the in-plane magnetization induced QAHE with Chern numbers C = $\pm$1 and the out-of-plane magnetization induced QAHE with high Chern numbers C = $\pm$3 can be realized in a single material candidate, which is composed of van der Waals (vdW) coupled Bi and MnBi$_2$Te$_4$ monolayers. The switching between different phases of QAHE can be controllable by multiple ways, such as applying strain or (weak) magnetic field or twisting the vdW materials. The prediction of an experimentally available material system hosting robust, highly tunable QAHE will stimulate great research interest in the field. Our work opens a new avenue for the realization of tunable QAHE and provides a practical material platform for the development of topological electronics. △ Less

Submitted 27 December, 2022; v1 submitted 25 December, 2022; originally announced December 2022.

Comments: 14 pages, 4 figures

Direct Immersogeometric Fluid Flow and Heat Transfer Analysis of Objects Represented by Point Clouds

Authors: Aditya Balu, Manoj R. Rajanna, Joel Khristy, Fei Xu, Adarsh Krishnamurthy, Ming-Chen Hsu

Abstract: Immersogeometric analysis (IMGA) is a geometrically flexible method that enables one to perform multiphysics analysis directly using complex computer-aided design (CAD) models. In this paper, we develop a novel IMGA approach for simulating incompressible and compressible flows around complex geometries represented by point clouds. The point cloud object's geometry is represented using a set of uns… ▽ More Immersogeometric analysis (IMGA) is a geometrically flexible method that enables one to perform multiphysics analysis directly using complex computer-aided design (CAD) models. In this paper, we develop a novel IMGA approach for simulating incompressible and compressible flows around complex geometries represented by point clouds. The point cloud object's geometry is represented using a set of unstructured points in the Euclidean space with (possible) orientation information in the form of surface normals. Due to the absence of topological information in the point cloud model, there are no guarantees for the geometric representation to be watertight or 2-manifold or to have consistent normals. To perform IMGA directly using point cloud geometries, we first develop a method for estimating the inside-outside information and the surface normals directly from the point cloud. We also propose a method to compute the Jacobian determinant for the surface integration (over the point cloud) necessary for the weak enforcement of Dirichlet boundary conditions. We validate these geometric estimation methods by comparing the geometric quantities computed from the point cloud with those obtained from analytical geometry and tessellated CAD models. In this work, we also develop thermal IMGA to simulate heat transfer in the presence of flow over complex geometries. The proposed framework is tested for a wide range of Reynolds and Mach numbers on benchmark problems of geometries represented by point clouds, showing the robustness and accuracy of the method. Finally, we demonstrate the applicability of our approach by performing IMGA on large industrial-scale construction machinery represented using a point cloud of more than 12 million points. △ Less

Submitted 24 October, 2022; originally announced October 2022.

Comments: 30 pages + references; Accepted in Computer Methods in Applied Mechanics and Engineering

Single-crystal elastic moduli, anisotropy and the B1-B2 phase transition of NaCl at high pressures: Experiment vs. ab-initio calculations

Authors: Feng Xu, Laurent Belliard, Chenhui Li, Philippe Djemia, Loïc Becerra, Haijun Huang, Bernard Perrin, Andreas Zerr

Abstract: Single-crystal elastic moduli, Cij, and the B1-B2 phase transition of NaCl were investigated experimentally, using time-domain Brillouin scattering (TDBS), and theoretically, via density-functional-theory (DFT), to 41 GPa. Thus, we largely extended pressure range where Cij and elastic anisotropy of the solid are measured, including the first experimental data for the high-pressure B2 phase, NaCl-B… ▽ More Single-crystal elastic moduli, Cij, and the B1-B2 phase transition of NaCl were investigated experimentally, using time-domain Brillouin scattering (TDBS), and theoretically, via density-functional-theory (DFT), to 41 GPa. Thus, we largely extended pressure range where Cij and elastic anisotropy of the solid are measured, including the first experimental data for the high-pressure B2 phase, NaCl-B2. NaCl-B1 exhibits a strong and growing with pressure anisotropy, in contrast to NaCl-B2. Theoretical values obtained using different advanced DFT functionals were compared with our measurements but no one could satisfactorily reproduce our experimental data for NaCl-B1 and NaCl-B2 simultaneously. For all available DFT results on the principal shear moduli and anisotropy, the deviation became pronounced when the degree of compression increased significantly. Similar deviations could be also recognized for other cubic solids having the same B1-type structure and similar bonding, such as CaO, MgO, or (Mg1-x,Fex)O. Furthermore, the available experimental data suggest that the B1-B2 phase transition of NaCl and the above mentioned compounds are governed by the Born stability criterion C44(P) - P > 0. △ Less

Submitted 22 September, 2022; originally announced September 2022.

Comments: 15 pages and 5 figures for the Manuscript, 10 pages and 7 figures for the Supplement

Search for relativistic fractionally charged particles in space

Authors: DAMPE Collaboration, F. Alemanno, C. Altomare, Q. An, P. Azzarello, F. C. T. Barbato, P. Bernardini, X. J. Bi, M. S. Cai, E. Casilli, E. Catanzani, J. Chang, D. Y. Chen, J. L. Chen, Z. F. Chen, M. Y. Cui, T. S. Cui, Y. X. Cui, H. T. Dai, A. De-Benedittis, I. De Mitri, F. de Palma, M. Deliyergiyev, A. Di Giovanni, M. Di Santo , et al. (126 additional authors not shown)

Abstract: More than a century after the performance of the oil drop experiment, the possible existence of fractionally charged particles FCP still remains unsettled. The search for FCPs is crucial for some extensions of the Standard Model in particle physics. Most of the previously conducted searches for FCPs in cosmic rays were based on experiments underground or at high altitudes. However, there have been… ▽ More More than a century after the performance of the oil drop experiment, the possible existence of fractionally charged particles FCP still remains unsettled. The search for FCPs is crucial for some extensions of the Standard Model in particle physics. Most of the previously conducted searches for FCPs in cosmic rays were based on experiments underground or at high altitudes. However, there have been few searches for FCPs in cosmic rays carried out in orbit other than AMS-01 flown by a space shuttle and BESS by a balloon at the top of the atmosphere. In this study, we conduct an FCP search in space based on on-orbit data obtained using the DArk Matter Particle Explorer (DAMPE) satellite over a period of five years. Unlike underground experiments, which require an FCP energy of the order of hundreds of GeV, our FCP search starts at only a few GeV. An upper limit of $6.2\times 10^{-10}~~\mathrm{cm^{-2}sr^{-1} s^{-1}}$ is obtained for the flux. Our results demonstrate that DAMPE exhibits higher sensitivity than experiments of similar types by three orders of magnitude that more stringently restricts the conditions for the existence of FCP in primary cosmic rays. △ Less

Submitted 9 September, 2022; originally announced September 2022.

Comments: 19 pages, 6 figures, accepted by PRD

Report number: 106, 063026

Journal ref: Physical Review D 106.6 (2022): 063026

IDP-PGFE: An Interpretable Disruption Predictor based on Physics-Guided Feature Extraction

Authors: Chengshuo Shen, Wei Zheng, Yonghua Ding, Xinkun Ai, Fengming Xue, Yu Zhong, Nengchao Wang, Li Gao, Zhipeng Chen, Zhoujun Yang, Zhongyong Chen, Yuan Pan, J-TEXT team

Abstract: Disruption prediction has made rapid progress in recent years, especially in machine learning (ML)-based methods. Understanding why a predictor makes a certain prediction can be as crucial as the prediction's accuracy for future tokamak disruption predictors. The purpose of most disruption predictors is accuracy or cross-machine capability. However, if a disruption prediction model can be interpre… ▽ More Disruption prediction has made rapid progress in recent years, especially in machine learning (ML)-based methods. Understanding why a predictor makes a certain prediction can be as crucial as the prediction's accuracy for future tokamak disruption predictors. The purpose of most disruption predictors is accuracy or cross-machine capability. However, if a disruption prediction model can be interpreted, it can tell why certain samples are classified as disruption precursors. This allows us to tell the types of incoming disruption and gives us insight into the mechanism of disruption. This paper designs a disruption predictor called Interpretable Disruption Predictor based On Physics-guided feature extraction (IDP-PGFE) on J-TEXT. The prediction performance of the model is effectively improved by extracting physics-guided features. A high-performance model is required to ensure the validity of the interpretation results. The interpretability study of IDP-PGFE provides an understanding of J-TEXT disruption and is generally consistent with existing comprehension of disruption. IDP-PGFE has been applied to the disruption due to continuously increasing density towards density limit experiments on J-TEXT. The time evolution of the PGFE features contribution demonstrates that the application of ECRH triggers radiation-caused disruption, which lowers the density at disruption. While the application of RMP indeed raises the density limit in J-TEXT. The interpretability study guides intuition on the physical mechanisms of density limit disruption that RMPs affect not only the MHD instabilities but also the radiation profile, which delays density limit disruption. △ Less

Submitted 28 August, 2022; originally announced August 2022.

Comments: 17 pages, 15 figures

Transferable Cross-Tokamak Disruption Prediction with Deep Hybrid Neural Network Feature Extractor

Authors: Wei Zheng, Fengming Xue, Ming Zhang, Zhongyong Chen, Chengshuo Shen, Xinkun Ai, Nengchao Wang, Dalong Chen, Bihao Guo, Yonghua Ding, Zhipeng Chen, Zhoujun Yang, Biao Shen, Bingjia Xiao, Yuan Pan

Abstract: Predicting disruptions across different tokamaks is a great obstacle to overcome. Future tokamaks can hardly tolerate disruptions at high performance discharge. Few disruption discharges at high performance can hardly compose an abundant training set, which makes it difficult for current data-driven methods to obtain an acceptable result. A machine learning method capable of transferring a disrupt… ▽ More Predicting disruptions across different tokamaks is a great obstacle to overcome. Future tokamaks can hardly tolerate disruptions at high performance discharge. Few disruption discharges at high performance can hardly compose an abundant training set, which makes it difficult for current data-driven methods to obtain an acceptable result. A machine learning method capable of transferring a disruption prediction model trained on one tokamak to another is required to solve the problem. The key is a disruption prediction model containing a feature extractor that is able to extract common disruption precursor traces in tokamak diagnostic data, and a transferable disruption classifier. Based on the concerns above, the paper first presents a deep fusion feature extractor designed specifically for extracting disruption precursor features from common diagnostics on tokamaks according to currently known precursors of disruption, providing a promising foundation for transferable models. The fusion feature extractor is proved by comparing with manual feature extraction on J-TEXT. Based on the feature extractor trained on J-TEXT, the disruption prediction model was transferred to EAST data with mere 20 discharges from EAST experiment. The performance is comparable with a model trained with 1896 discharges from EAST. From the comparison among other model training scenarios, transfer learning showed its potential in predicting disruptions across different tokamaks. △ Less

Submitted 19 August, 2022; originally announced August 2022.

Prospects for Detecting the Diffuse Supernova Neutrino Background with JUNO

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli, Thilo Birkenfeld, Sylvie Blin , et al. (577 additional authors not shown)

Abstract: We present the detection potential for the diffuse supernova neutrino background (DSNB) at the Jiangmen Underground Neutrino Observatory (JUNO), using the inverse-beta-decay (IBD) detection channel on free protons. We employ the latest information on the DSNB flux predictions, and investigate in detail the background and its reduction for the DSNB search at JUNO. The atmospheric neutrino induced n… ▽ More We present the detection potential for the diffuse supernova neutrino background (DSNB) at the Jiangmen Underground Neutrino Observatory (JUNO), using the inverse-beta-decay (IBD) detection channel on free protons. We employ the latest information on the DSNB flux predictions, and investigate in detail the background and its reduction for the DSNB search at JUNO. The atmospheric neutrino induced neutral current (NC) background turns out to be the most critical background, whose uncertainty is carefully evaluated from both the spread of model predictions and an envisaged \textit{in situ} measurement. We also make a careful study on the background suppression with the pulse shape discrimination (PSD) and triple coincidence (TC) cuts. With latest DSNB signal predictions, more realistic background evaluation and PSD efficiency optimization, and additional TC cut, JUNO can reach the significance of 3$σ$ for 3 years of data taking, and achieve better than 5$σ$ after 10 years for a reference DSNB model. In the pessimistic scenario of non-observation, JUNO would strongly improve the limits and exclude a significant region of the model parameter space. △ Less

Submitted 13 October, 2022; v1 submitted 18 May, 2022; originally announced May 2022.

Comments: 29 pages, 11 figures, final published version in JCAP

Journal ref: JCAP 10 (2022) 033

Mass Testing and Characterization of 20-inch PMTs for JUNO

Authors: Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, Joao Pedro Athayde Marcondes de Andre, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli , et al. (541 additional authors not shown)

Abstract: Main goal of the JUNO experiment is to determine the neutrino mass ordering using a 20kt liquid-scintillator detector. Its key feature is an excellent energy resolution of at least 3 % at 1 MeV, for which its instruments need to meet a certain quality and thus have to be fully characterized. More than 20,000 20-inch PMTs have been received and assessed by JUNO after a detailed testing program whic… ▽ More Main goal of the JUNO experiment is to determine the neutrino mass ordering using a 20kt liquid-scintillator detector. Its key feature is an excellent energy resolution of at least 3 % at 1 MeV, for which its instruments need to meet a certain quality and thus have to be fully characterized. More than 20,000 20-inch PMTs have been received and assessed by JUNO after a detailed testing program which began in 2017 and elapsed for about four years. Based on this mass characterization and a set of specific requirements, a good quality of all accepted PMTs could be ascertained. This paper presents the performed testing procedure with the designed testing systems as well as the statistical characteristics of all 20-inch PMTs intended to be used in the JUNO experiment, covering more than fifteen performance parameters including the photocathode uniformity. This constitutes the largest sample of 20-inch PMTs ever produced and studied in detail to date, i.e. 15,000 of the newly developed 20-inch MCP-PMTs from Northern Night Vision Technology Co. (NNVT) and 5,000 of dynode PMTs from Hamamatsu Photonics K. K.(HPK). △ Less

Submitted 17 September, 2022; v1 submitted 17 May, 2022; originally announced May 2022.

Multifunctional Two-dimensional van der Waals Janus Magnet Cr-based Dichalcogenide Halides

Authors: Yusheng Hou, Feng Xue, Liang Qiu, Zhe Wang, Ruqian Wu

Abstract: Two-dimensional van der Waals Janus materials and their heterostructures offer fertile platforms for designing fascinating functionalities. Here, by means of systematic first-principles studies on van der Waals Janus monolayer Cr-based dichalcogenide halides CrYX (Y=S, Se, Te; X=Cl, Br, I), we find that CrSX (X=Cl, Br, I) are the very desirable high TC ferromagnetic semiconductors with an out-of-p… ▽ More Two-dimensional van der Waals Janus materials and their heterostructures offer fertile platforms for designing fascinating functionalities. Here, by means of systematic first-principles studies on van der Waals Janus monolayer Cr-based dichalcogenide halides CrYX (Y=S, Se, Te; X=Cl, Br, I), we find that CrSX (X=Cl, Br, I) are the very desirable high TC ferromagnetic semiconductors with an out-of-plane magnetization. Excitingly, by the benefit of the large magnetic moments on ligand S2- anions, the sought-after large-gap quantum anomalous Hall effect and sizable valley splitting can be achieved through the magnetic proximity effect in van der Waals heterostructures CrSBr/Bi2Se3/CrSBr and MoTe2/CrSBr, respectively. Additionally, we show that large Dzyaloshinskii-Moriya interactions give rise to skyrmion states in CrTeX (X=Cl, Br, I) under external magnetic fields. Our work reveals that two-dimensional Janus magnet Cr-based dichalcogenide halides have appealing multifunctionalities in the applications of topological electronic and valleytronic devices. △ Less

Submitted 9 May, 2022; originally announced May 2022.

Comments: 4 figures, 24 pages; accepted by npj Computational Materials

Journal ref: npj Computational Materials (2022) 120

Enhanced optoelectronic performance and photogating effect in quasi-one-dimensional BiSeI wires

Authors: H. J. Hu, W. L. Zhen, S. R. Weng, Y. D. Li, R. Niu, Z. L. Yue, F. Xu, L. Pi, C. J. Zhang, W. K. Zhu

Abstract: Quasi-one-dimensional (quasi-1D) materials are a newly arising topic in low-dimensional researches. As a result of reduced dimensionality and enhanced anisotropy, the quasi-1D structure gives rise to novel properties and promising applications such as photodetectors. However, it remains an open question whether performance crossover will occur when the channel material is downsized. Here we report… ▽ More Quasi-one-dimensional (quasi-1D) materials are a newly arising topic in low-dimensional researches. As a result of reduced dimensionality and enhanced anisotropy, the quasi-1D structure gives rise to novel properties and promising applications such as photodetectors. However, it remains an open question whether performance crossover will occur when the channel material is downsized. Here we report on the fabrication and testing of photodetectors based on exfoliated quasi-1D BiSeI thin wires. Compared with the device on bulk crystal, a significantly enhanced photoresponse is observed, which is manifested by a series of performance parameters, including ultrahigh responsivity (7 x 10$^4$ A W$^{-1}$), specific detectivity (2.5 x 10$^{14}$ Jones) and external quantum efficiency (1.8 x 10$^7$%) when $V_{\textrm {ds}}$ = 3 V, $λ$ = 515 nm and $P$ = 0.01 mW cm$^{-2}$. The conventional photoconductive effect is unlikely to account for such a superior photoresponse, which is ultimately understood in terms of the increased specific surface area and the photogating effect caused by trap** states. This work provides a perspective for the modulation of optoelectronic properties and performance in quasi-1D materials. △ Less

Submitted 4 May, 2022; originally announced May 2022.

Comments: 23 pages, 4 figures and SI

Journal ref: Appl. Phys. Lett. 120, 201101 (2022)

Stability and low-energy orientations of interphase boundaries in multiaxial ferroelectrics: Phase-field simulations

Authors: Yang Zhang, Fei Xue, Bo Wang, Jia-Mian Hu, Shuai Dong, Jun-Ming Liu, Long-Qing Chen

Abstract: The coexistence of different ferroelectric phases enables the tunability of the macroscopic properties and extensive applications from piezoelectric transducers to nonvolatile memories. Here we develop a thermodynamic model to predict the stability and low-energy orientations of boundaries between different phases in ferroelectrics. Taking lead zirconate titanate and bismuth ferrite as two example… ▽ More The coexistence of different ferroelectric phases enables the tunability of the macroscopic properties and extensive applications from piezoelectric transducers to nonvolatile memories. Here we develop a thermodynamic model to predict the stability and low-energy orientations of boundaries between different phases in ferroelectrics. Taking lead zirconate titanate and bismuth ferrite as two examples, we demonstrate that the low-energy orientations of interphase boundaries are largely determined by minimizing the electrostatic and elastic energies. Phase-field simulations are employed to analyze the competition between the interfacial energy and the electrostatic and elastic energies. Our simulation results demonstrate that the lowering of crystal symmetry could occur due to the electrical and mechanical incompatibilities between the two phases, which can be used to explain the experimentally observed low-symmetry phases near morphotropic phase boundaries. Our work provides theoretical foundations for understanding and controlling the interphase boundaries in ferroelectric materials for multifunctional applications. △ Less

Submitted 24 January, 2022; originally announced January 2022.

Journal ref: Phys. Rev. B 105, 014108 (2022)

Predicting Axillary Lymph Node Metastasis in Early Breast Cancer Using Deep Learning on Primary Tumor Biopsy Slides

Authors: Feng Xu, Chuang Zhu, Wenqi Tang, Ying Wang, Yu Zhang, Jie Li, Hongchuan Jiang, Zhongyue Shi, Jun Liu, Mulan **

Abstract: Objectives: To develop and validate a deep learning (DL)-based primary tumor biopsy signature for predicting axillary lymph node (ALN) metastasis preoperatively in early breast cancer (EBC) patients with clinically negative ALN. Methods: A total of 1,058 EBC patients with pathologically confirmed ALN status were enrolled from May 2010 to August 2020. A DL core-needle biopsy (DL-CNB) model was bu… ▽ More Objectives: To develop and validate a deep learning (DL)-based primary tumor biopsy signature for predicting axillary lymph node (ALN) metastasis preoperatively in early breast cancer (EBC) patients with clinically negative ALN. Methods: A total of 1,058 EBC patients with pathologically confirmed ALN status were enrolled from May 2010 to August 2020. A DL core-needle biopsy (DL-CNB) model was built on the attention-based multiple instance-learning (AMIL) framework to predict ALN status utilizing the DL features, which were extracted from the cancer areas of digitized whole-slide images (WSIs) of breast CNB specimens annotated by two pathologists. Accuracy, sensitivity, specificity, receiver operating characteristic (ROC) curves, and areas under the ROC curve (AUCs) were analyzed to evaluate our model. Results: The best-performing DL-CNB model with VGG16_BN as the feature extractor achieved an AUC of 0.816 (95% confidence interval (CI): 0.758, 0.865) in predicting positive ALN metastasis in the independent test cohort. Furthermore, our model incorporating the clinical data, which was called DL-CNB+C, yielded the best accuracy of 0.831 (95%CI: 0.775, 0.878), especially for patients younger than 50 years (AUC: 0.918, 95%CI: 0.825, 0.971). The interpretation of DL-CNB model showed that the top signatures most predictive of ALN metastasis were characterized by the nucleus features including density ($p$ = 0.015), circumference ($p$ = 0.009), circularity ($p$ = 0.010), and orientation ($p$ = 0.012). Conclusion: Our study provides a novel DL-based biomarker on primary tumor CNB slides to predict the metastatic status of ALN preoperatively for patients with EBC. The codes and dataset are available at https://github.com/bupt-ai-cz/BALNMP △ Less

Submitted 8 June, 2022; v1 submitted 3 December, 2021; originally announced December 2021.

Comments: Update Table 1 and corresponding descriptions

Journal ref: Frontiers in Oncology, 11(2021), 4133

Directly Characterizing the Coherence of Quantum Detectors by Sequential Measurement

Authors: Liang Xu, Huichao Xu, Jie Xie, Hui Li, Lin Zhou, Feixiang Xu, Lijian Zhang

Abstract: The quantum properties of quantum measurements are indispensable resources in quantum information processing and have drawn extensive research interest. The conventional approach to reveal the quantum properties relies on the reconstruction of the entire measurement operators by quantum detector tomography. However, many specific properties can be determined by a part of matrix entries of the meas… ▽ More The quantum properties of quantum measurements are indispensable resources in quantum information processing and have drawn extensive research interest. The conventional approach to reveal the quantum properties relies on the reconstruction of the entire measurement operators by quantum detector tomography. However, many specific properties can be determined by a part of matrix entries of the measurement operators, which provides us the possibility to simplify the process of property characterization. Here, we propose a general framework to directly obtain individual matrix entries of the measurement operators by sequentially measuring two non-compatible observables. This method allows us to circumvent the complete tomography of the quantum measurement and extract the useful information for our purpose. We experimentally implement this scheme to monitor the coherent evolution of a general quantum measurement by determining the off-diagonal matrix entries. The investigation of the measurement precision indicates the good feasibility of our protocol to the arbitrary quantum measurements. Our results pave the way for revealing the quantum properties of quantum measurements by selectively determining the matrix entries of the measurement operators. △ Less

Submitted 19 November, 2021; originally announced November 2021.

Comments: 30 pages, 5 figures

Journal ref: Adv. Photonics, 2021, 3(6): 066001

Quasi-linear analysis of dispersion relation preservation for nonlinear schemes

Authors: Fengyuan Xu, Pan Yan, Qin Li, Yancheng You

Abstract: In numerical simulations of complex flows with discontinuities, it is necessary to use nonlinear schemes. The spectrum of the scheme used have a significant impact on the resolution and stability of the computation. Based on the approximate dispersion relation method, we combine the corresponding spectral property with the dispersion relation preservation proposed by De and Eswaran (J. Comput. Phy… ▽ More In numerical simulations of complex flows with discontinuities, it is necessary to use nonlinear schemes. The spectrum of the scheme used have a significant impact on the resolution and stability of the computation. Based on the approximate dispersion relation method, we combine the corresponding spectral property with the dispersion relation preservation proposed by De and Eswaran (J. Comput. Phys. 218 (2006) 398-416) and propose a quasi-linear dispersion relation preservation (QL-DRP) analysis method, through which the group velocity of the nonlinear scheme can be determined. In particular, we derive the group velocity property when a high-order Runge-Kutta scheme is used and compare the performance of different time schemes with QL-DRP. The rationality of the QL-DRP method is verified by a numerical simulation and the discrete Fourier transform method. To further evaluate the performance of a nonlinear scheme in finding the group velocity, new hyperbolic equations are designed. The validity of QL-DRP and the group velocity preservation of several schemes are investigated using two examples of the equation for one-dimensional wave propagation and the new hyperbolic equations. The results show that the QL-DRP method integrated with high-order time schemes can determine the group velocity for nonlinear schemes and evaluate their performance reasonably and efficiently. △ Less

Submitted 28 October, 2021; originally announced October 2021.

Stacked polarimeters with twisted black phosphorus

Authors: Yifeng Xiong, Yushu Wang, Runze Zhu, Haotian Xu, Chenhui Wu, **-hui Chen, Yang Ma, Yuan Liu, Ye Chen, K. Watanabe, T. Taniguchi, Mengzhu Shi, Xianhui Chen, Yanqing Lu, Peng Zhan, Yufeng Hao, Fei Xu

Abstract: The real-time, in-line analysis of light polarization is critical in optical communication networks, which suffers from the complex systems with numerous bulky opto-electro-mechanical elements tandemly arranged along optical path. Here, we propose a fiber-integrated polarimeter with nano-thickness by vertically stacking three two-dimensional (2D) materials based photodetection units. We demonstrat… ▽ More The real-time, in-line analysis of light polarization is critical in optical communication networks, which suffers from the complex systems with numerous bulky opto-electro-mechanical elements tandemly arranged along optical path. Here, we propose a fiber-integrated polarimeter with nano-thickness by vertically stacking three two-dimensional (2D) materials based photodetection units. We demonstrate a self-power-calibrated, ultrafast, unambiguous detection of linear (LP) and circular polarized (CP) light according to the symmetry broken induced linear photogalvanic effects (LPGE) and circular photogalvanic effects (CPGE) in black phosphorous (BP) units, which are twistedly stacked to substitute traditional mechanical rotation of polarizers. As a demonstration, we achieve Hadamard single-pixel polarimetric imaging by the polarimeter to recognize the polarization distributions, showing potential in high-speed polarization-division-multiplexed imaging and real-time polarized endoscopy. This work provides a new strategy for next-generation ultracompact optical and optoelectronic systems, and guides a way for develo** high-resolution arrayed devices with multifunctional pixels. △ Less

Submitted 27 October, 2021; originally announced October 2021.

Ultralow-power all-optical switching via a chiral Mach-Zehnder interferometer

Authors: Y. P. Ruan, H. D. Wu, S. J. Ge, L. Tang, Z. X. Li, H. Zhang, F. Xu, W. Hu, M. Xiao, Y. Q. Lu, K. Y. Xia

Abstract: All-optical switching increasingly plays an important role in optical information processing. However, simultaneous achievement of ultralow power consumption, broad bandwidth and high extinction ratio remains challenging. We experimentally demonstrate an ultralow-power all-optical switching by exploiting chiral interaction between light and optically active material in a Mach-Zehnder interferomete… ▽ More All-optical switching increasingly plays an important role in optical information processing. However, simultaneous achievement of ultralow power consumption, broad bandwidth and high extinction ratio remains challenging. We experimentally demonstrate an ultralow-power all-optical switching by exploiting chiral interaction between light and optically active material in a Mach-Zehnder interferometer (MZI). We achieve switching extinction ratio of 20.0(3.8) and 14.7(2.8) dB with power cost of 66.1(0.7) and 1.3(0.1) fJ/bit, respectively. The bandwidth of our all-optical switching is about 4.2 GHz. Our theoretical analysis shows that the switching bandwidth can, in principle, exceed 110 GHz. Moreover, the switching has the potential to be operated at few-photon level. Our all-optical switching exploits a chiral MZI made of linear optical components. It excludes the requisite of high-quality optical cavity or large optical nonlinearity, thus greatly simplifying realization. Our scheme paves the way towards ultralow-power and ultrafast all-optical information processing. △ Less

Submitted 30 July, 2021; originally announced July 2021.

Comments: 6 figures

Radioactivity control strategy for the JUNO detector

Authors: JUNO collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli, Thilo Birkenfeld, Sylvie Blin , et al. (578 additional authors not shown)

Abstract: JUNO is a massive liquid scintillator detector with a primary scientific goal of determining the neutrino mass ordering by studying the oscillated anti-neutrino flux coming from two nuclear power plants at 53 km distance. The expected signal anti-neutrino interaction rate is only 60 counts per day, therefore a careful control of the background sources due to radioactivity is critical. In particula… ▽ More JUNO is a massive liquid scintillator detector with a primary scientific goal of determining the neutrino mass ordering by studying the oscillated anti-neutrino flux coming from two nuclear power plants at 53 km distance. The expected signal anti-neutrino interaction rate is only 60 counts per day, therefore a careful control of the background sources due to radioactivity is critical. In particular, natural radioactivity present in all materials and in the environment represents a serious issue that could impair the sensitivity of the experiment if appropriate countermeasures were not foreseen. In this paper we discuss the background reduction strategies undertaken by the JUNO collaboration to reduce at minimum the impact of natural radioactivity. We describe our efforts for an optimized experimental design, a careful material screening and accurate detector production handling, and a constant control of the expected results through a meticulous Monte Carlo simulation program. We show that all these actions should allow us to keep the background count rate safely below the target value of 10 Hz in the default fiducial volume, above an energy threshold of 0.7 MeV. △ Less

Submitted 13 October, 2021; v1 submitted 8 July, 2021; originally announced July 2021.

Comments: 35 pages, 12 figures

Non-line-of-sight imaging with picosecond temporal resolution

Authors: Bin Wang, Ming-Yang Zheng, **-Jian Han, Xin Huang, Xiu-** Xie, Feihu Xu, Qiang Zhang, Jian-Wei Pan

Abstract: Non-line-of-sight (NLOS) imaging enables monitoring around corners and is promising for diverse applications. The resolution of transient NLOS imaging is limited to a centimeter scale, mainly by the temporal resolution of the detectors. Here, we construct an up-conversion single-photon detector with a high temporal resolution of ~1.4 ps and a low noise count rate of 5 counts per second (cps). Nota… ▽ More Non-line-of-sight (NLOS) imaging enables monitoring around corners and is promising for diverse applications. The resolution of transient NLOS imaging is limited to a centimeter scale, mainly by the temporal resolution of the detectors. Here, we construct an up-conversion single-photon detector with a high temporal resolution of ~1.4 ps and a low noise count rate of 5 counts per second (cps). Notably, the detector operates at room temperature, near-infrared wavelength. Using this detector, we demonstrate high-resolution and low-noise NLOS imaging. Our system can provide a 180 μm axial resolution and a 2 mm lateral resolution, which is more than one order of magnitude better than that in previous experiments. These results open avenues for high-resolution NLOS imaging techniques in relevant applications. △ Less

Submitted 29 June, 2021; originally announced June 2021.

Comments: 6 pages, 4 figures

Journal ref: Phys.Rev.Lett. 127 (2021) 053602