-
Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$
Authors:
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere,
A. Brueggemann
, et al. (645 additional authors not shown)
Abstract:
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be…
▽ More
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Large Language Model-Augmented Auto-Delineation of Treatment Target Volume in Radiation Therapy
Authors:
Praveenbalaji Rajendran,
Yong Yang,
Thomas R. Niedermayr,
Michael Gensheimer,
Beth Beadle,
Quynh-Thu Le,
Lei Xing,
Xian** Dai
Abstract:
Radiation therapy (RT) is one of the most effective treatments for cancer, and its success relies on the accurate delineation of targets. However, target delineation is a comprehensive medical decision that currently relies purely on manual processes by human experts. Manual delineation is time-consuming, laborious, and subject to interobserver variations. Although the advancements in artificial i…
▽ More
Radiation therapy (RT) is one of the most effective treatments for cancer, and its success relies on the accurate delineation of targets. However, target delineation is a comprehensive medical decision that currently relies purely on manual processes by human experts. Manual delineation is time-consuming, laborious, and subject to interobserver variations. Although the advancements in artificial intelligence (AI) techniques have significantly enhanced the auto-contouring of normal tissues, accurate delineation of RT target volumes remains a challenge. In this study, we propose a visual language model-based RT target volume auto-delineation network termed Radformer. The Radformer utilizes a hierarichal vision transformer as the backbone and incorporates large language models to extract text-rich features from clinical data. We introduce a visual language attention module (VLAM) for integrating visual and linguistic features for language-aware visual encoding (LAVE). The Radformer has been evaluated on a dataset comprising 2985 patients with head-and-neck cancer who underwent RT. Metrics, including the Dice similarity coefficient (DSC), intersection over union (IOU), and 95th percentile Hausdorff distance (HD95), were used to evaluate the performance of the model quantitatively. Our results demonstrate that the Radformer has superior segmentation performance compared to other state-of-the-art models, validating its potential for adoption in RT practice.
△ Less
Submitted 9 July, 2024;
originally announced July 2024.
-
Non-Hermitian skin effect in arbitrary dimensions: non-Bloch band theory and classification
Authors:
Yuncheng Xiong,
Ze-Yu Xing,
Hai** Hu
Abstract:
Non-Hermitian skin effect (NHSE) is a distinctive phenomenon in non-Hermitian systems, characterized by a significant accumulation of eigenstates at system boundaries. While well-understood in one dimension via non-Bloch band theory, unraveling the NHSE in higher dimensions faces formidable challenges due to the diversity of open boundary conditions or lattice geometries and inevitable numerical e…
▽ More
Non-Hermitian skin effect (NHSE) is a distinctive phenomenon in non-Hermitian systems, characterized by a significant accumulation of eigenstates at system boundaries. While well-understood in one dimension via non-Bloch band theory, unraveling the NHSE in higher dimensions faces formidable challenges due to the diversity of open boundary conditions or lattice geometries and inevitable numerical errors. Key issues, including higher-dimensional non-Bloch band theory, geometric dependency, spectral convergence and stability, and a complete classification of NHSE, remain elusive. In this work, we address these challenges by presenting a geometry-adaptive non-Bloch band theory in arbitrary dimensions, through the lens of spectral potential. Our formulation accurately determines the energy spectra, density of states, and generalized Brillouin zone for a given geometry in the thermodynamic limit (TDL), revealing their geometric dependencies. Furthermore, we systematically classify the NHSE into critical and non-reciprocal types using net winding numbers. In the critical case, we identify novel scale-free skin modes residing on the boundary. In the nonreciprocal case, the skin modes manifest in various forms, including normal or anomalous corner modes, boundary modes or scale-free modes. We reveal the non-convergence and instability of the non-Bloch spectra in the presence of scale-free modes and attribute it to the non-exchangeability of the zero-perturbation limit and the TDL. The instability drives the energy spectra towards the Amoeba spectra in the critical case. Our findings provide a unified non-Bloch band theory governing the energy spectra, density of states, and generalized Brillouin zone in the TDL, offering a comprehensive understanding of NHSE in arbitrary dimensions.
△ Less
Submitted 1 July, 2024;
originally announced July 2024.
-
Super-resolution imaging using super-oscillatory diffractive neural networks
Authors:
Hang Chen,
Sheng Gao,
Zejia Zhao,
Zhengyang Duan,
Haiou Zhang,
Gordon Wetzstein,
Xing Lin
Abstract:
Optical super-oscillation enables far-field super-resolution imaging beyond diffraction limits. However, the existing super-oscillatory lens for the spatial super-resolution imaging system still confronts critical limitations in performance due to the lack of a more advanced design method and the limited design degree of freedom. Here, we propose an optical super-oscillatory diffractive neural net…
▽ More
Optical super-oscillation enables far-field super-resolution imaging beyond diffraction limits. However, the existing super-oscillatory lens for the spatial super-resolution imaging system still confronts critical limitations in performance due to the lack of a more advanced design method and the limited design degree of freedom. Here, we propose an optical super-oscillatory diffractive neural network, i.e., SODNN, that can achieve super-resolved spatial resolution for imaging beyond the diffraction limit with superior performance over existing methods. SODNN is constructed by utilizing diffractive layers to implement optical interconnections and imaging samples or biological sensors to implement nonlinearity, which modulates the incident optical field to create optical super-oscillation effects in 3D space and generate the super-resolved focal spots. By optimizing diffractive layers with 3D optical field constraints under an incident wavelength size of $λ$, we achieved a super-oscillatory spot with a full width at half maximum of 0.407$λ$ in the far field distance over 400$λ$ without side-lobes over the field of view, having a long depth of field over 10$λ$. Furthermore, the SODNN implements a multi-wavelength and multi-focus spot array that effectively avoids chromatic aberrations. Our research work will inspire the development of intelligent optical instruments to facilitate the applications of imaging, sensing, perception, etc.
△ Less
Submitted 27 June, 2024;
originally announced June 2024.
-
Diagnosis Assistant for Liver Cancer Utilizing a Large Language Model with Three Types of Knowledge
Authors:
Xuzhou Wu,
Guangxin Li,
Xing Wang,
Zeyu Xu,
Yingni Wang,
Jianming Xian,
Xueyu Wang,
Gong Li,
Kehong Yuan
Abstract:
Liver cancer has a high incidence rate, but primary healthcare settings often lack experienced doctors. Advances in large models and AI technologies offer potential assistance. This work aims to address limitations in liver cancer diagnosis models, such as poor understanding of medical images, insufficient consideration of liver blood vessels, and ensuring accurate medical information. We propose…
▽ More
Liver cancer has a high incidence rate, but primary healthcare settings often lack experienced doctors. Advances in large models and AI technologies offer potential assistance. This work aims to address limitations in liver cancer diagnosis models, such as poor understanding of medical images, insufficient consideration of liver blood vessels, and ensuring accurate medical information. We propose a specialized diagnostic assistant to improve the diagnostic capabilities of less experienced doctors. Our framework combines large and small models, using optimized small models for precise patient image perception. Specifically, a segmentation network iteratively removes ambiguous pixels for liver tumor segmentation, and a multi-scale, multi-level differential network segments liver vessels. Features from these segmentations and medical records form a patient's personalized knowledge base. For diagnosis, Chain of Thought (COT) technology designs prompts mimicking experienced doctors' thought patterns, and Retrieval-Augmented Generation (RAG) technology provides answers based on reliable domain knowledge and trusted cases. Our small model methods improve liver tumor and vessel segmentation performance, resulting in more accurate information extraction. The large model component scores over 1 point higher on a 10-point scale in evaluations by doctors compared to control methods. Our method enhances semantic perception of medical images, improves classification of ambiguous pixels, and optimizes small object perception. It considers blood vessel positions for specific treatments and improves response credibility and interpretability by mimicking experienced doctors' thought processes using reliable resources. This approach has been recognized by doctors and benefits liver cancer auxiliary diagnosis.
△ Less
Submitted 25 June, 2024;
originally announced June 2024.
-
A response to commenter Ke Lan's comment on our paper published in Nature Communications (2023)14:5782 by J. Yan et al
Authors:
Ji Yan,
Jiwei Li,
X. T. He,
Lifeng Wang,
Yaohua Chen,
Feng Wang,
Xiaoying Han,
Kaiqiang Pan,
Juxi Liang,
Yulong Li,
Zanyang Guan,
Xiangming Liu,
Xingsen Che,
Zhong**g Chen,
Xing Zhang,
Yan Xu,
Bin Li,
Minging He,
Hongbo Cai,
Liang. Hao,
Zhanjun Liu,
Chunyang Zheng,
Zhensheng Dai,
Zhengfeng Fan,
Bin Qiao
, et al. (4 additional authors not shown)
Abstract:
A response to commenter Ke Lan's comment on our paper published in Nature Communications (2023)14:5782 by J. Yan et al
A response to commenter Ke Lan's comment on our paper published in Nature Communications (2023)14:5782 by J. Yan et al
△ Less
Submitted 25 June, 2024;
originally announced June 2024.
-
Competing excitation quenching and charge exchange in ultracold Li-Ba$^+$ collisions
Authors:
Xiaodong Xing,
Pascal Weckesser,
Fabian Thielemann,
Tibor Jónás,
Romain Vexiau,
Nadia Bouloufa-Maafa,
Eliane Luc-Koenig,
Kirk W. Madison,
Andrea Orbán,
Ting Xie,
Tobias Schaetz,
Olivier Dulieu
Abstract:
Hybrid atom-ion systems are a rich and powerful platform for studying chemical reactions, as they feature both excellent control over the electronic state preparation and readout as well as a versatile tunability over the scattering energy, ranging from the few-partial wave regime to the quantum regime. In this work, we make use of these excellent control knobs, and present a joint experimental an…
▽ More
Hybrid atom-ion systems are a rich and powerful platform for studying chemical reactions, as they feature both excellent control over the electronic state preparation and readout as well as a versatile tunability over the scattering energy, ranging from the few-partial wave regime to the quantum regime. In this work, we make use of these excellent control knobs, and present a joint experimental and theoretical study of the collisions of a single $^{138}$Ba$^+$ ion prepared in the $5d\,^2D_{3/2,5/2}$ metastable states with a ground state $^6$Li gas near quantum degeneracy. We show that in contrast to previously reported atom-ion mixtures, several non-radiative processes, including charge exchange, excitation exchange and quenching, compete with each other due to the inherent complexity of the ion-atom molecular structure. We present a full quantum model based on high-level electronic structure calculations involving spin-orbit couplings. Results are in excellent agreement with observations, highlighting the strong coupling between the internal angular momenta and the mechanical rotation of the colliding pair, which is relevant in any other hybrid system composed of an alkali-metal atom and an alkaline-earth ion.
△ Less
Submitted 23 June, 2024;
originally announced June 2024.
-
Automated radiotherapy treatment planning guided by GPT-4Vision
Authors:
Sheng Liu,
Oscar Pastor-Serrano,
Yizheng Chen,
Matthew Gopaulchan,
Weixing Liang,
Mark Buyyounouski,
Erqi Pollom,
Quynh-Thu Le,
Michael Gensheimer,
Peng Dong,
Yong Yang,
James Zou,
Lei Xing
Abstract:
Radiotherapy treatment planning is a time-consuming and potentially subjective process that requires the iterative adjustment of model parameters to balance multiple conflicting objectives. Recent advancements in large foundation models offer promising avenues for addressing the challenges in planning and clinical decision-making. This study introduces GPT-RadPlan, a fully automated treatment plan…
▽ More
Radiotherapy treatment planning is a time-consuming and potentially subjective process that requires the iterative adjustment of model parameters to balance multiple conflicting objectives. Recent advancements in large foundation models offer promising avenues for addressing the challenges in planning and clinical decision-making. This study introduces GPT-RadPlan, a fully automated treatment planning framework that harnesses prior radiation oncology knowledge encoded in multi-modal large language models, such as GPT-4Vision (GPT-4V) from OpenAI. GPT-RadPlan is made aware of planning protocols as context and acts as an expert human planner, capable of guiding a treatment planning process. Via in-context learning, we incorporate clinical protocols for various disease sites as prompts to enable GPT-4V to acquire treatment planning domain knowledge. The resulting GPT-RadPlan agent is integrated into our in-house inverse treatment planning system through an API. The efficacy of the automated planning system is showcased using multiple prostate and head & neck cancer cases, where we compared GPT-RadPlan results to clinical plans. In all cases, GPT-RadPlan either outperformed or matched the clinical plans, demonstrating superior target coverage and organ-at-risk sparing. Consistently satisfying the dosimetric objectives in the clinical protocol, GPT-RadPlan represents the first multimodal large language model agent that mimics the behaviors of human planners in radiation oncology clinics, achieving remarkable results in automating the treatment planning process without the need for additional training.
△ Less
Submitted 1 July, 2024; v1 submitted 21 June, 2024;
originally announced June 2024.
-
Symmetry engineering in 2D bioelectronics facilitating augmented biosensing interfaces
Authors:
Yizhang Wu,
Yihan Liu,
Yuan Li,
Ziquan Wei,
Sicheng Xing,
Yunlang Wang,
Dashuai Zhu,
Ziheng Guo,
Anran Zhang,
Gongkai Yuan,
Zhibo Zhang,
Ke Huang,
Yong Wang,
Guorong Wu,
Ke Cheng,
Wubin Bai
Abstract:
Symmetry lies at the heart of 2D bioelectronics, determining material properties at the fundamental level. Breaking the symmetry allows emergent functionalities and effects. However, symmetry modulation in 2D bioelectronics and the resultant applications have been largely overlooked. Here we devise an oxidized architectural MXene, referred as OXene, that couples orbit symmetric breaking with inver…
▽ More
Symmetry lies at the heart of 2D bioelectronics, determining material properties at the fundamental level. Breaking the symmetry allows emergent functionalities and effects. However, symmetry modulation in 2D bioelectronics and the resultant applications have been largely overlooked. Here we devise an oxidized architectural MXene, referred as OXene, that couples orbit symmetric breaking with inverse symmetric breaking to entitle the optimized interfacial impedance and Schottky-induced piezoelectric effects. The resulting OXene validates applications ranging from microelectrode arrays, gait analysis, active transistor matrix, and wireless signaling transmission, which enables highly-fidelity signal transmission and reconfigurable logic gates. Further OXene interfaces are investigated in both rodent and porcine myocardium, featuring high-quality and spatiotemporally resolved physiological recordings, while accurate differentiated predictions, enabled via various machine learning pipelines.
△ Less
Submitted 19 June, 2024;
originally announced June 2024.
-
Orbit symmetry breaking in MXene implements enhanced soft bioelectronic implants
Authors:
Yizhang Wu,
Yuan Li,
Yihan Liu,
Dashuai Zhu,
Sicheng Xing,
Noah Lambert,
Hannah Weisbecker,
Siyuan Liu,
Brayden Davis,
Lin Zhang,
Meixiang Wang,
Gongkai Yuan,
Chris Zhoufan You,
Anran Zhang,
Cate Duncan,
Wanrong Xie,
Yihang Wang,
Yong Wang,
Sreya Kanamurlapudi,
Garcia-Guzman Evert,
Arjun Putcha,
Michael D. Dickey,
Ke Huang,
Wubin Bai
Abstract:
Bioelectronic implants with soft mechanics, biocompatibility, and excellent electrical performance enable biomedical implants to record electrophysiological signals and execute interventions within internal organs, promising to revolutionize the diagnosing, monitoring, and treatment of various pathological conditions. However, challenges remain in improving excessive impedance at the bioelectronic…
▽ More
Bioelectronic implants with soft mechanics, biocompatibility, and excellent electrical performance enable biomedical implants to record electrophysiological signals and execute interventions within internal organs, promising to revolutionize the diagnosing, monitoring, and treatment of various pathological conditions. However, challenges remain in improving excessive impedance at the bioelectronic-tissue interface and thus the efficacy of electrophysiological signaling and intervention. Here, we devise orbit symmetry breaking in MXene (a low-cost scalability, biocompatible, and conductive 2D layered material, that we refer to as OBXene), that exhibits low bioelectronic-tissue impedance, originating from the out-of-plane charge transfer. Furthermore, the Schottky-induced piezoelectricity stemming from the asymmetric orbital configuration of OBXene facilitates interlayered charge transport in the device. In this study, we report an OBXene-based cardiac patch applied on the left ventricular epicardium of both rodent and porcine models to enable spatiotemporal epicardium map** and pacing, while coupling the wireless and battery-free operation for long-term real-time recording and closed-loop stimulation.
△ Less
Submitted 19 June, 2024;
originally announced June 2024.
-
XENONnT WIMP Search: Signal & Background Modeling and Statistical Inference
Authors:
XENON Collaboration,
E. Aprile,
J. Aalbers,
K. Abe,
S. Ahmed Maouloud,
L. Althueser,
B. Andrieu,
E. Angelino,
D. Antón Martin,
F. Arneodo,
L. Baudis,
M. Bazyk,
L. Bellagamba,
R. Biondi,
A. Bismark,
K. Boese,
A. Brown,
G. Bruno,
R. Budnik,
J. M. R. Cardoso,
A. P. Cimental Chávez,
A. P. Colijn,
J. Conrad,
J. J. Cuenca-García,
V. D'Andrea
, et al. (139 additional authors not shown)
Abstract:
The XENONnT experiment searches for weakly-interacting massive particle (WIMP) dark matter scattering off a xenon nucleus. In particular, XENONnT uses a dual-phase time projection chamber with a 5.9-tonne liquid xenon target, detecting both scintillation and ionization signals to reconstruct the energy, position, and type of recoil. A blind search for nuclear recoil WIMPs with an exposure of 1.1 t…
▽ More
The XENONnT experiment searches for weakly-interacting massive particle (WIMP) dark matter scattering off a xenon nucleus. In particular, XENONnT uses a dual-phase time projection chamber with a 5.9-tonne liquid xenon target, detecting both scintillation and ionization signals to reconstruct the energy, position, and type of recoil. A blind search for nuclear recoil WIMPs with an exposure of 1.1 tonne-years yielded no signal excess over background expectations, from which competitive exclusion limits were derived on WIMP-nucleon elastic scatter cross sections, for WIMP masses ranging from 6 GeV/$c^2$ up to the TeV/$c^2$ scale. This work details the modeling and statistical methods employed in this search. By means of calibration data, we model the detector response, which is then used to derive background and signal models. The construction and validation of these models is discussed, alongside additional purely data-driven backgrounds. We also describe the statistical inference framework, including the definition of the likelihood function and the construction of confidence intervals.
△ Less
Submitted 19 June, 2024;
originally announced June 2024.
-
Ultra-bright and energy-efficient quantum-dot LEDs by idealizing charge injection
Authors:
Yizhen Zheng,
Xing Lin,
Jiongzhao Li,
Jianan Chen,
Zixuan Song,
Yuan Gao,
Huifeng Wang,
Zikang Ye,
Haiyan Qin,
Xiaogang Peng
Abstract:
Lighting and display, relying on electric and optical down-conversion emission with sluggish power efficiency, account for >15% global electricity consumption1,2. In 2014, quantum-dot (QD) LEDs (QLEDs) with near-optimal external quantum efficiency emerged3 and promised a pathway to avoid the vast down-conversion energy loss4,5. Despite a decade of progress4-22, fabrication of energy-efficient QLED…
▽ More
Lighting and display, relying on electric and optical down-conversion emission with sluggish power efficiency, account for >15% global electricity consumption1,2. In 2014, quantum-dot (QD) LEDs (QLEDs) with near-optimal external quantum efficiency emerged3 and promised a pathway to avoid the vast down-conversion energy loss4,5. Despite a decade of progress4-22, fabrication of energy-efficient QLEDs with application-relevant brightness remains elusive. Here, the main roadblock is identified as the oxidative species adsorbed in the nanocrystalline electron-injection layer of QLEDs, which is then addressed by a simple reductive treatment to simultaneously boosts electron conductivity and hole blockage of the electron-injection layer. The resulting sub-bandgap-driven QLEDs with optimal efficiency achieve ultra-high brightness across the entire visible spectrum at least 2.6-fold higher than existing benchmarks. The brightness fully satisfies the demands of various forms of lighting and display, which surges to a remarkable level sufficient for QD laser diodes with a moderate bias (~9 V). Optimized electron injection further enables new types of QD-blend LEDs for diffuse white-light sources surpassing the 2035 R&D targets set by the U.S. Department of Energy. Our findings open a door for understanding and optimizing carrier transport in nanocrystalline semiconductors shared by various types of solution-processed optoelectronic devices.
△ Less
Submitted 14 June, 2024;
originally announced June 2024.
-
Vector Angular Spectrum Model for light travelling in scattering media
Authors:
Kaige Liu,
Hengkang Zhang,
Zeqi Liu,
Bin Zhang,
Xing Fu,
Qiang Yuan,
Qiang Liu
Abstract:
Strongly scattering media disrupt both the wavefront distribution and the polarization state of the incident light field. Controlling and effectively utilizing depolarization effects are crucial for optical applications in highly scattering environments, such as imaging through dense fog. However, current simulation models have difficulty simulating the evolution of vector light fields within scat…
▽ More
Strongly scattering media disrupt both the wavefront distribution and the polarization state of the incident light field. Controlling and effectively utilizing depolarization effects are crucial for optical applications in highly scattering environments, such as imaging through dense fog. However, current simulation models have difficulty simulating the evolution of vector light fields within scattering media, posing challenges for studying vector light fields in strongly scattering environments. Here, we propose the Vector Angular Spectrum (VAS) model for simulating the propagation of vector light fields within scattering media. By introducing the angular spectrum distribution of vector light scattering and polarization conversion mechanisms, this model can simulate the depolarization effects of vector light propagating through strongly scattering media. The VAS model has also been used to investigate the focusing of vector scattered light through scattering media. Furthermore, the simulation results of the model have been validated through experiments. The proposed VAS model is expected to play a role in the theoretical research of vector scattered light and optical applications in strongly scattering environments.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
3D transcranial Dynamic Ultrasound Localization Microscopy in the mouse brain using a Row-Column Array
Authors:
Alice Wu,
Jonathan Porée,
Gerardo Ramos-Palacios,
Chloé Bourquin,
Nin Ghigo,
Alexis Leconte,
Paul Xing,
Abbas F. Sadikot,
Michaël Chassé,
Jean Provost
Abstract:
The role of brain hemodynamics in neurodegenerative diseases cannot be fully assessed using existing imaging technologies. Recently, 2D Dynamic Ultrasound Localization Microscopy (DULM) has allowed for the quantitative map** of the pulsatile flow at sub-wavelength resolution. However, to obtain accurate velocity estimates, 3D imaging is more adapted, especially for complex vascularized organs li…
▽ More
The role of brain hemodynamics in neurodegenerative diseases cannot be fully assessed using existing imaging technologies. Recently, 2D Dynamic Ultrasound Localization Microscopy (DULM) has allowed for the quantitative map** of the pulsatile flow at sub-wavelength resolution. However, to obtain accurate velocity estimates, 3D imaging is more adapted, especially for complex vascularized organs like the brain. 3D+t DULM is achievable using matrix array probes, but suffers from limitations in terms of cost, device complexity associated with the high channel count, and operating frequencies. Alternatively, Row Column Arrays (RCA) can reduce the number of elements while maintaining a large field of view and high frame rate. Herein, we demonstrate the feasibility of performing 3D+t blood flow measurements in the mouse brain using an RCA and a DULM sequence with a high spatiotemporal resolution. Transcranial images of anesthetized mice (n=7) were acquired at a volume rate of 750 Hz using 42 tilted plane waves. After microbubbles localization and tracking, super-resolved dynamic density and velocity maps of the 3D brain vascular network were obtained. Cortical vessels were segmented and pulsatility in the arteries was significantly higher than in veins for all mice, in accordance with the literature. Our results demonstrate the feasibility and reproducibility of achieving high spatiotemporal resolution volumes of the mouse brain vasculature with DULM using a RCA.
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
Progress in patterned wax stamp for prototy** of paper-based microfluidic analytical devices via injection molding
Authors:
Zhizhi Zhou,
Jiahuan Jiang,
Yuanyuan Sun,
Qing Qin,
Sitong Yuan,
Xilin Wang,
Jianhua Jiang,
Yifeng Su,
Xing Hu,
Mingying Liu,
Feng Yang
Abstract:
In this study, we successfully developed two-dimensional paper-based analytical devices using a hybrid technique of injection molding and embossing. This innovative approach involves passive or active delivery of molten wax onto a glass substrate through a sealed chip, facilitating wax stamp creation.
In this study, we successfully developed two-dimensional paper-based analytical devices using a hybrid technique of injection molding and embossing. This innovative approach involves passive or active delivery of molten wax onto a glass substrate through a sealed chip, facilitating wax stamp creation.
△ Less
Submitted 31 May, 2024;
originally announced May 2024.
-
Multi-watt 1 GHz single-cycle frequency combs
Authors:
Yanyan Zhang,
Sida Xing
Abstract:
Single-cycle optical pulses offer a strong carrier-envelope-offset (CEO) dependent electric field and the highest peak intensity for a given pulse energy. Absence of demonstrated GHz single-cycle lasers constrains exploration of single/sub-cycle dynamics at this repetition rate. By leveraging fiber soliton effects and suppressing higher-order dispersion, we achieve single-cycle pulse generation at…
▽ More
Single-cycle optical pulses offer a strong carrier-envelope-offset (CEO) dependent electric field and the highest peak intensity for a given pulse energy. Absence of demonstrated GHz single-cycle lasers constrains exploration of single/sub-cycle dynamics at this repetition rate. By leveraging fiber soliton effects and suppressing higher-order dispersion, we achieve single-cycle pulse generation at a 1 GHz repetition rate in an all-fiber format. The laser produces 7.1 fs (1.1-cycle) pulses with 1.8 W average power, centered around 1970 nm. Temporal characterization shows 60% of the pulse energy is concentrated in the pulse center, yielding a peak power of 110 kW. The seed laser demonstrates a 43 dB signal-to-noise ratio for the CEO frequency, facilitating comb stabilization and CEO control. Our model, which matches experimental observations, identifies conditions for achieving single-cycle duration and predicts scalability to a 2 GHz repetition rate. This work presents the first GHz single-cycle source. We envision these advances will drive studies in single/sub-cycle light-matter interaction, spectroscopy, microscopy, and CEO-sensitive nonlinear optics.
△ Less
Submitted 30 May, 2024;
originally announced May 2024.
-
VBIM-Net: Variational Born Iterative Network for Inverse Scattering Problems
Authors:
Ziqing Xing,
Zhaoyang Zhang,
Zirui Chen,
Yusong Wang,
Haoran Ma,
Zhun Wei,
Gang Bao
Abstract:
Recently, studies have shown the potential of integrating field-type iterative methods with deep learning (DL) techniques in solving inverse scattering problems (ISPs). In this article, we propose a novel Variational Born Iterative Network, namely, VBIM-Net, to solve the full-wave ISPs with significantly improved flexibility and inversion quality. The proposed VBIM-Net emulates the alternating upd…
▽ More
Recently, studies have shown the potential of integrating field-type iterative methods with deep learning (DL) techniques in solving inverse scattering problems (ISPs). In this article, we propose a novel Variational Born Iterative Network, namely, VBIM-Net, to solve the full-wave ISPs with significantly improved flexibility and inversion quality. The proposed VBIM-Net emulates the alternating updates of the total electric field and the contrast in the variational Born iterative method (VBIM) by multiple layers of subnetworks. We embed the calculation of the contrast variation into each of the subnetworks, converting the scattered field residual into an approximate contrast variation and then enhancing it by a U-Net, thus avoiding the requirement of matched measurement dimension and grid resolution as in existing approaches. The total field and contrast of each layer's output is supervised in the loss function of VBIM-Net, which guarantees the physical interpretability of variables of the subnetworks. In addition, we design a training scheme with extra noise to enhance the model's stability. Extensive numerical results on synthetic and experimental data both verify the inversion quality, generalization ability, and robustness of the proposed VBIM-Net. This work may provide some new inspiration for the design of efficient field-type DL schemes.
△ Less
Submitted 28 May, 2024;
originally announced May 2024.
-
Two-octave frequency combs from all-silica-fiber implementation
Authors:
Yanyan Zhang,
Mingkun Li,
Pan Zhang,
Yueqing Du,
Shibang Ma,
Yuanshan Liu,
Sida Xing,
Shougang Zhang
Abstract:
Mid-infrared frequency comb spectroscopy enables measurement of molecular at megahertz spectral resolution, sub-hertz frequency accuracy and microsecond acquisition speed. However, the widespread adoption of this technique has been hindered by the complexity and alignment sensitivity of mid-infrared frequency comb sources. Leveraging the underexplored mid-infrared window of silica fibers presents…
▽ More
Mid-infrared frequency comb spectroscopy enables measurement of molecular at megahertz spectral resolution, sub-hertz frequency accuracy and microsecond acquisition speed. However, the widespread adoption of this technique has been hindered by the complexity and alignment sensitivity of mid-infrared frequency comb sources. Leveraging the underexplored mid-infrared window of silica fibers presents a promising approach to address these challenges. In this study, we present the first experimental demonstration and quantitative numerical description of mid-infrared frequency comb generation in silica fibers. Our all-silica-fiber frequency comb spans over two octaves (0.8 $μ$m to 3.5 $μ$m) with a power output of 100 mW in the mid-infrared region. The amplified quantum noise is suppressed using four-cycle (25 fs) driving pulses, with the carrier-envelope offset frequency exhibiting a signal-to-noise ratio of 40 dB and a free-running bandwidth of 90 kHz. Our developed model provides quantitative guidelines for mid-infrared frequency comb generation in silica fibers, enabling all-fiber frequency comb spectroscopy in diverse fields such as organic synthesis, pharmacokinetics processes, and environmental monitoring.
△ Less
Submitted 23 May, 2024;
originally announced May 2024.
-
Pick-and-place transfer of arbitrary-metal electrodes for van der Waals device fabrication
Authors:
Kaijian Xing,
Daniel McEwen,
Weiyao Zhao,
Abdulhakim Bake,
David Cortie,
**gying Liu,
Thi-Hai-Yen Vu,
James Hone,
Alastair Stacey,
Mark T. Edmonds,
Kenji Watanabe,
Takashi Taniguchi,
Qingdong Ou,
Dong-Chen Qi,
Michael S. Fuhrer
Abstract:
Van der Waals electrode integration is a promising strategy to create near-perfect interfaces between metals and two-dimensional materials, with advantages such as eliminating Fermi-level pinning and reducing contact resistance. However, the lack of a simple, generalizable pick-and-place transfer technology has greatly hampered the wide use of this technique. We demonstrate the pick-and-place tran…
▽ More
Van der Waals electrode integration is a promising strategy to create near-perfect interfaces between metals and two-dimensional materials, with advantages such as eliminating Fermi-level pinning and reducing contact resistance. However, the lack of a simple, generalizable pick-and-place transfer technology has greatly hampered the wide use of this technique. We demonstrate the pick-and-place transfer of pre-fabricated electrodes from reusable polished hydrogenated diamond substrates without the use of any surface treatments or sacrificial layers. The technique enables transfer of large-scale arbitrary metal electrodes, as demonstrated by successful transfer of eight different elemental metals with work functions ranging from 4.22 to 5.65 eV. The mechanical transfer of metal electrodes from diamond onto van der Waals materials creates atomically smooth interfaces with no interstitial impurities or disorder, as observed with cross-sectional high-resolution transmission electron microscopy and energy-dispersive X-ray spectroscopy. As a demonstration of its device application, we use the diamond-transfer technique to create metal contacts to monolayer transition metal dichalcogenide semiconductors with high-work-function Pd, low-work-function Ti, and semi metal Bi to create n- and p-type field-effect transistors with low Schottky barrier heights. We also extend this technology to other applications such as ambipolar transistor and optoelectronics, paving the way for new device architectures and high-performance devices.
△ Less
Submitted 21 May, 2024;
originally announced May 2024.
-
Data quality control system and long-term performance monitor of the LHAASO-KM2A
Authors:
Zhen Cao,
F. Aharonian,
Axikegu,
Y. X. Bai,
Y. W. Bao,
D. Bastieri,
X. J. Bi,
Y. J. Bi,
W. Bian,
A. V. Bukevich,
Q. Cao,
W. Y. Cao,
Zhe Cao,
J. Chang,
J. F. Chang,
A. M. Chen,
E. S. Chen,
H. X. Chen,
Liang Chen,
Lin Chen,
Long Chen,
M. J. Chen,
M. L. Chen,
Q. H. Chen,
S. Chen
, et al. (263 additional authors not shown)
Abstract:
The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To…
▽ More
The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively.
△ Less
Submitted 13 June, 2024; v1 submitted 20 May, 2024;
originally announced May 2024.
-
Ferroelectricity Driven by Orbital Resonance of Protons in CH$_3$NH$_3$Cl and CH$_3$NH$_3$Br
Authors:
Chu Xin Peng,
Lei Meng,
Yi Yang Xu,
Tian Tian Xing,
Miao Miao Zhao,
Peng Ren,
Fei Yen
Abstract:
The $β$ and $γ$ phases of methylammonium chloride CH$_3$NH$_3$Cl and methylammonium bromide CH$_3$NH$_3$Br are identified to be ferroelectric $via$ pyroelectric current and dielectric constant measurements. The magnetic susceptibility also exhibits pronounced discontinuities at the Curie temperatures. We attribute the origin of spontaneous polarization to the emergence of two groups of proton orbi…
▽ More
The $β$ and $γ$ phases of methylammonium chloride CH$_3$NH$_3$Cl and methylammonium bromide CH$_3$NH$_3$Br are identified to be ferroelectric $via$ pyroelectric current and dielectric constant measurements. The magnetic susceptibility also exhibits pronounced discontinuities at the Curie temperatures. We attribute the origin of spontaneous polarization to the emergence of two groups of proton orbital magnetic moments from the uncorrelated motion of the CH$_3$ and NH$_3$ groups in the $β$ and $γ$ phases. The two inequivalent frameworks of intermolecular orbital resonances interact with each other to distort the lattice in a non-centrosymmetric fashion. Our findings indicate that the structural instabilities in molecular frameworks are magnetic in origin as well as provide a new pathway toward uncovering new organic ferroelectrics.
△ Less
Submitted 15 May, 2024;
originally announced May 2024.
-
Impacts of Hot Electron Diffusion, Electron-Phonon Coupling, and Surface Atoms on Metal Surface Dynamics Revealed by Reflection Ultrafast Electron Diffraction
Authors:
Xing He,
Mithun Ghosh,
Ding-Shyue Yang
Abstract:
Metals exhibit nonequilibrium electron and lattice subsystems at transient times following femtosecond laser excitation. In the past four decades, various optical spectroscopy and time-resolved diffraction methods have been used to study electron-phonon coupling and the effects of underlying dynamical processes. Here, we take advantage of the surface specificity of reflection ultrafast electron di…
▽ More
Metals exhibit nonequilibrium electron and lattice subsystems at transient times following femtosecond laser excitation. In the past four decades, various optical spectroscopy and time-resolved diffraction methods have been used to study electron-phonon coupling and the effects of underlying dynamical processes. Here, we take advantage of the surface specificity of reflection ultrafast electron diffraction (UED) to examine the structural dynamics of photoexcited metal surfaces, which are apparently slower in recovery than predicted by thermal diffusion from the profile of absorbed energy. Fast diffusion of hot electrons is found to critically reduce surface excitation and affect the temporal dependence of the increased atomic motions on not only the ultrashort but sub-nanosecond times. Whereas the two-temperature model with the accepted physical constants of platinum can reproduce the observed surface lattice dynamics, gold is found to exhibit appreciably larger-than-expected dynamic vibrational amplitudes of surface atoms while kee** the commonly used electron-phonon coupling constant. Such surface behavioral difference at transient times can be understood in the context of the different strengths of binding to surface atoms for the two metals. In addition, with the quantitative agreements between diffraction and theoretical results, we provide convincing evidence that surface structural dynamics can be reliably obtained by reflection UED even in the presence of laser-induced transient electric fields.
△ Less
Submitted 15 May, 2024;
originally announced May 2024.
-
Photonic Landau levels in a high-dimensional frequency-degenerate cavity
Authors:
**g Pan,
Zhaoyang Wang,
Yuan Meng,
Xing Fu,
Yijie Shen,
Qiang Liu
Abstract:
Topological orders emerge in both microscopic quantum dynamics and macroscopic materials as a fundamental principle to characterize intricate properties in nature with vital significance, for instance, the Landau levels of electron systems in magnetic field. Whilst, recent advances of synthetic photonic systems enable generalized concepts of Landau levels across fermionic and bosonic systems, exte…
▽ More
Topological orders emerge in both microscopic quantum dynamics and macroscopic materials as a fundamental principle to characterize intricate properties in nature with vital significance, for instance, the Landau levels of electron systems in magnetic field. Whilst, recent advances of synthetic photonic systems enable generalized concepts of Landau levels across fermionic and bosonic systems, extending the modern physical frontier. However, the controls of Landau levels of photons were only confined in complex artificial metamaterials or multifolded cavities. Here, we exploit advanced structured light laser technology and propose the theory of high-dimensional frequency-degeneracy, which enables photonic Landau level control in a linear open laser cavity with simple displacement tuning of intracavity elements. This work not only create novel structured light with new topological effects but also provides broad prospects for Bose-analogue quantum Hall effects and topological physics.
△ Less
Submitted 15 May, 2024;
originally announced May 2024.
-
Complex-valued 3D atomic spectroscopy with Gaussian-assisted inline holography
Authors:
Xing Huang,
Yuzhuo Wang,
Jian Zhao,
Saijun Wu
Abstract:
When a laser-cooled atomic sample is optically excited, the envelope of coherent forward scattering can often be decomposed into a few complex Gaussian profiles. The convenience of Gaussian propagation helps addressing key challenges in digital holography. In this work, we theoretically develop and experimentally demonstrate a Gaussian-decomposition-assisted approach to inline holography, for sing…
▽ More
When a laser-cooled atomic sample is optically excited, the envelope of coherent forward scattering can often be decomposed into a few complex Gaussian profiles. The convenience of Gaussian propagation helps addressing key challenges in digital holography. In this work, we theoretically develop and experimentally demonstrate a Gaussian-decomposition-assisted approach to inline holography, for single-shot, simultaneous measurements of absorption and phase shift of small atomic samples sparsely distributed in 3D. Experimentally, we image a sparse lattice of $^{87}$Rb samples on the D2 line, to resolve their axial positions with micrometer precision, and to retrieve their complex-valued spectroscopic images. With the phase-angle readouts that are highly insensitive to atom-number and interaction-strength uncertainties, we achieve hundred-kHz-level single-shot-resolution to the transition frequency with merely hundreds of atoms. We further demonstrate 3D sensing of local light shift with micrometer spatial resolution.
△ Less
Submitted 23 May, 2024; v1 submitted 15 May, 2024;
originally announced May 2024.
-
Search for solar axions by Primakoff effect with the full dataset of the CDEX-1B Experiment
Authors:
L. T. Yang,
S. K. Liu,
Q. Yue,
K. J. Kang,
Y. J. Li,
H. P. An,
Greeshma C.,
J. P. Chang,
Y. H. Chen,
J. P. Cheng,
W. H. Dai,
Z. Deng,
C. H. Fang,
X. P. Geng,
H. Gong,
Q. J. Guo,
T. Guo,
X. Y. Guo,
L. He,
J. R. He,
J. W. Hu,
H. X. Huang,
T. C. Huang,
L. Jiang,
S. Karmakar
, et al. (61 additional authors not shown)
Abstract:
We present the first limit on $g_{Aγ}$ coupling constant using the Bragg-Primakoff conversion based on an exposure of 1107.5 kg days of data from the CDEX-1B experiment at the China **** Underground Laboratory. The data are consistent with the null signal hypothesis, and no excess signals are observed. Limits of the coupling $g_{Aγ}<2.08\times10^{-9}$ GeV$^{-1}$ (95\% C.L.) are derived for axio…
▽ More
We present the first limit on $g_{Aγ}$ coupling constant using the Bragg-Primakoff conversion based on an exposure of 1107.5 kg days of data from the CDEX-1B experiment at the China **** Underground Laboratory. The data are consistent with the null signal hypothesis, and no excess signals are observed. Limits of the coupling $g_{Aγ}<2.08\times10^{-9}$ GeV$^{-1}$ (95\% C.L.) are derived for axions with mass up to 100 eV/$c^2$. Within the hadronic model of KSVZ, our results exclude axion mass $>5.3~\rm{eV}/c^2$ at 95\% C.L.
△ Less
Submitted 12 May, 2024;
originally announced May 2024.
-
Measurement of Spin-Polarized Photoemission from Wurtzite and Zinc-Blende Gallium Nitride Photocathodes
Authors:
S. J. Levenson,
M. B. Andorf,
B. D. Dickensheets,
I. V. Bazarov,
A. Galdi,
J. Encomendero,
V. V. Protasenko,
D. Jena,
H. G. Xing,
J. M. Maxson
Abstract:
Spin-polarized photoemission from wurtzite and zinc-blende gallium nitride (GaN) photocathodes has been observed and measured for the first time. The p-doped GaN photocathodes were epitaxially grown and activated to negative electron affinity (NEA) with a cesium monolayer deposited on their surfaces. A field-retarding Mott polarimeter was used to measure the spin-polarization of electrons photoemi…
▽ More
Spin-polarized photoemission from wurtzite and zinc-blende gallium nitride (GaN) photocathodes has been observed and measured for the first time. The p-doped GaN photocathodes were epitaxially grown and activated to negative electron affinity (NEA) with a cesium monolayer deposited on their surfaces. A field-retarding Mott polarimeter was used to measure the spin-polarization of electrons photoemitted from the top of the valence band. A spectral scan with a tunable optical parametric amplifier (OPA) constructed to provide low-bandwidth light revealed peak spin polarizations of 17% and 29% in the wurtzite and zinc-blende photocathodes, respectively. Zinc-blende GaN results are analyzed with a spin-polarization model accounting for experimental parameters used in the measurements, while possible mechanisms influencing the obtained spin polarization values of wurtzite GaN are discussed.
△ Less
Submitted 7 May, 2024;
originally announced May 2024.
-
Flexible terahertz metasurface absorbers empowered by bound states in the continuum
Authors:
Guizhen Xu,
Zhanqiang Xue,
Junxing Fan,
Dan Lu,
Hongyang Xing,
Perry ** Shum,
Longqing Cong
Abstract:
Terahertz absorbers are crucial to the cutting-edge techniques in the next-generation wireless communications, imaging, sensing, and radar stealth, as they fundamentally determine the performance of detectors and cloaking capabilities. It has long been a pressing task to find absorbers with customizable performance that can adapt to various environments with low cost and great flexibility. Here, w…
▽ More
Terahertz absorbers are crucial to the cutting-edge techniques in the next-generation wireless communications, imaging, sensing, and radar stealth, as they fundamentally determine the performance of detectors and cloaking capabilities. It has long been a pressing task to find absorbers with customizable performance that can adapt to various environments with low cost and great flexibility. Here, we demonstrate perfect absorption empowered by bound states in the continuum (BICs) allowing for the tailoring of absorption coefficient, bandwidth, and field of view. The one-port absorbers are interpreted using temporal coupled-mode theory highlighting the dominant role of BICs in the far-field radiation properties. Through a thorough investigation of BICs from the perspective of lattice symmetry, we unravel the radiation features of three BIC modes using both multipolar and topological analysis. The versatile radiation capabilities of BICs provide ample freedom to meet specific requirements of absorbers, including tunable bandwidth, stable performance in a large field of view, and multi-band absorption using a thin and flexible film without extreme geometric demands. Our findings offer a systematic approach to develo** optoelectronic devices and demonstrate the significant potential of BICs for optical and photonic applications which will stimulate further studies on terahertz photonics and metasurfaces.
△ Less
Submitted 6 May, 2024;
originally announced May 2024.
-
Non-invasive magnetocardiography of living rat based on diamond quantum sensor
Authors:
Ziyun Yu,
Yi** Xie,
Guodong **,
Yunbin Zhu,
Qi Zhang,
Fazhan Shi,
Fang-yan Wan,
Hongmei Luo,
Ai-hui Tang,
Xing Rong
Abstract:
Magnetocardiography (MCG) has emerged as a sensitive and precise method to diagnose cardiovascular diseases, providing more diagnostic information than traditional technology. However, the sensor limitations of conventional MCG systems, such as large size and cryogenic requirement, have hindered the widespread application and in-depth understanding of this technology. In this study, we present a h…
▽ More
Magnetocardiography (MCG) has emerged as a sensitive and precise method to diagnose cardiovascular diseases, providing more diagnostic information than traditional technology. However, the sensor limitations of conventional MCG systems, such as large size and cryogenic requirement, have hindered the widespread application and in-depth understanding of this technology. In this study, we present a high-sensitivity, room-temperature MCG system based on the negatively charged Nitrogen-Vacancy (NV) centers in diamond. The magnetic cardiac signal of a living rat, characterized by an approximately 20 pT amplitude in the R-wave, is successfully captured through non-invasive measurement using this innovative solid-state spin sensor. To detect these extremely weak biomagnetic signals, we utilize sensitivity-enhancing techniques such as magnetic flux concentration. These approaches have enabled us to simultaneously achieve a magnetometry sensitivity of 9 $\text{pT}\cdot \text{Hz}^{-1/2}$ and a sensor scale of 5 $\text{mm}$. By extending the sensing scale of the NV centers from cellular and molecular level to macroscopic level of living creatures, we have opened the future of solid-state quantum sensing technologies in clinical environments.
△ Less
Submitted 3 May, 2024;
originally announced May 2024.
-
Broadband microwave-rate dark pulse microcombs in dissipation-engineered LiNbO$_3$ microresonators
Authors:
Xiaomin Lv,
Binbin Nie,
Chen Yang,
Rui Ma,
Ze Wang,
Yanwu Liu,
Xing **,
Kaixuan Zhu,
Zhenyu Chen,
Du Qian,
Guanyu Zhang,
Guowei Lv,
Qihuang Gong,
Fang Bo,
Qi-Fan Yang
Abstract:
Kerr microcombs generated in optical microresonators provide broadband light sources bridging optical and microwave signals. Their translation to thin-film lithium niobate unlocks second-order nonlinear optical interfaces such as electro-optic modulation and frequency doubling for completing comb functionalities. However, the strong Raman response of LiNbO$_3$ has complicated the formation of Kerr…
▽ More
Kerr microcombs generated in optical microresonators provide broadband light sources bridging optical and microwave signals. Their translation to thin-film lithium niobate unlocks second-order nonlinear optical interfaces such as electro-optic modulation and frequency doubling for completing comb functionalities. However, the strong Raman response of LiNbO$_3$ has complicated the formation of Kerr microcombs. Until now, dark pulse microcombs, requiring a double balance between Kerr nonlinearity and normal group velocity dispersion as well as gain and loss, have remained elusive in LiNbO$_3$ microresonators. Here, by incorporating dissipation engineering, we demonstrate dark pulse microcombs with 25 GHz repetition frequency and 200 nm span in a high-$Q$ LiNbO$_3$ microresonator. Resonances near the Raman-active wavelengths are strongly damped by controlling phase-matching conditions of a specially designed pulley coupler. The coherence and tunability of the dark pulse microcombs are also investigated. Our work provides a solution to realize high-power microcombs operating at microwave rates on LiNbO$_3$ chips, promising new opportunities for the monolithic integration of applications spanning communication to microwave photonics.
△ Less
Submitted 30 April, 2024;
originally announced April 2024.
-
Enhanced second harmonic generation in high-$Q$ all-dielectric metasurfaces with backward frequency conversion
Authors:
Xu Tu,
Siqi Feng,
Jiajun Li,
Yangguang Xing,
Feng Wu,
Tingting Liu,
Shuyuan Xiao
Abstract:
Here we employ the quasi-bound state in the continuum (quasi-BIC) resonance in all-dielectric metasurfaces for efficient nonlinear processes in consideration of the backward frequency conversion. We theoretically study the second-harmonic generation (SHG) from symmetry-broken AlGaAs metasurfaces and reveal the efficiency enhancement empowered by high-$Q$ quasi-BIC resonances. By introducing the co…
▽ More
Here we employ the quasi-bound state in the continuum (quasi-BIC) resonance in all-dielectric metasurfaces for efficient nonlinear processes in consideration of the backward frequency conversion. We theoretically study the second-harmonic generation (SHG) from symmetry-broken AlGaAs metasurfaces and reveal the efficiency enhancement empowered by high-$Q$ quasi-BIC resonances. By introducing the correction term of nonlinear polarization at the fundamental wave field to the conventional undepleted approximation, we uncover the effect of backward frequency conversion on the nonlinear conversation efficiency. The SHG efficiency as $2.45\times10^{-2}$ with the developed depleted model, shows a $14.3\%$ decrease compared with $2.86\times10^{-2}$ in conventional undepleted approximation, under the incident intensity of 10 MW/cm$^{2}$. Our results are of significant importance for designing efficient nonlinear metasurfaces supporting high-$Q$ resonances.
△ Less
Submitted 11 June, 2024; v1 submitted 29 April, 2024;
originally announced April 2024.
-
On-liquid-gallium surface synthesis of ultra-smooth conductive metal-organic framework thin films
Authors:
**xin Liu,
Yunxu Chen,
Xing Huang,
Yanhan Ren,
Mike Hambsch,
David Bodesheim,
Darius Pohl,
Xiaodong Li,
Marielle Deconinck,
Bowen Zhang,
Markus Löffler,
Zhongquan Liao,
Fengxiang Zhao,
Arezoo Dianat,
Gianaurelio Cuniberti,
Yana Vaynzof,
Junfeng Gao,
**gcheng Hao,
Stefan C. B. Mannsfeld,
Xinliang Feng,
Renhao Dong
Abstract:
Conductive metal-organic frameworks (MOFs) are emerging electroactive materials for (opto-)electronics. However, it remains a great challenge to achieve reliable MOF-based devices via the existing synthesis methods that are compatible with the complementary metal-oxide-semiconductor technology, as the surface roughness of thus-far synthetic MOF films or pellets is rather high for efficient electro…
▽ More
Conductive metal-organic frameworks (MOFs) are emerging electroactive materials for (opto-)electronics. However, it remains a great challenge to achieve reliable MOF-based devices via the existing synthesis methods that are compatible with the complementary metal-oxide-semiconductor technology, as the surface roughness of thus-far synthetic MOF films or pellets is rather high for efficient electrode contact. Here, we develop an on-liquid-gallium surface synthesis (OLGSS) strategy under chemical vapor deposition (CVD) conditions for the controlled growth of two-dimensional conjugated MOF (2D c-MOF) thin films with ten-fold improvement of surface flatness (surface roughness can reach as low as ~2 Å) compared with MOF films grown by the traditional methods. Supported by theoretical modeling, we unveil a layer-by-layer CVD growth mode for constructing flattening surfaces, that is triggered by the high adhesion energy between gallium (Ga) and planar aromatic ligands. We further demonstrate the generality of the as-proposed OLGSS strategy by reproducing such a flat surface over nine different 2D c-MOF films with variable thicknesses (~2 to 208 nm) and large lateral sizes (over 1 cm2). The resultant ultra-smooth 2D c-MOF films enable the formation of high-quality electrical contacts with gold (Au) electrodes, leading to a reduction of contact resistance by over ten orders of magnitude compared to the traditional uneven MOF films. Furthermore, due to the efficient interfacial interaction benifited from the high-quality contacts, the prepared van der Waals heterostructure (vdWH) of OLGSS c-MOF and MoS2 exhibits intriguing photoluminescence (PL) enhancement, PL peak shift and large work function modulation. The establishment of the reliable OLGSS method provides the chances to push the development of MOF electronics and the construction of multicomponent MOF-based heterostructure materials.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
ETROC1: The First Full Chain Precision Timing Prototype ASIC for CMS MTD Endcap Timing Layer Upgrade
Authors:
Xing Huang,
Quan Sun,
Datao Gong,
Piljun Gwak,
Doyeong Kim,
Jongho Lee,
Chonghan Liu,
Tiankuan Liu,
Tiehui Liu,
Sergey Los,
Sandeep Miryala,
Shirsendu Nanda,
Jamieson Olsen,
Hanhan Sun,
**yuan Wu,
**gbo Ye,
Zhenyu Ye,
Li Zhang,
Wei Zhang
Abstract:
We present the design and characterization of the first full chain precision timing prototype ASIC, named ETL Readout Chip version 1 (ETROC1) for the CMS MTD endcap timing layer (ETL) upgrade. The ETL utilizes Low Gain Avalanche Diode (LGAD) sensors to detect charged particles, with the goal to achieve a time resolution of 40 - 50 ps per hit, and 30 - 40 ps per track with hits from two detector la…
▽ More
We present the design and characterization of the first full chain precision timing prototype ASIC, named ETL Readout Chip version 1 (ETROC1) for the CMS MTD endcap timing layer (ETL) upgrade. The ETL utilizes Low Gain Avalanche Diode (LGAD) sensors to detect charged particles, with the goal to achieve a time resolution of 40 - 50 ps per hit, and 30 - 40 ps per track with hits from two detector layers. The ETROC1 is composed of a 5 x 5 pixel array and peripheral circuits. The pixel array includes a 4 x 4 active pixel array with an H-tree shaped network delivering clock and charge injection signals. Each active pixel is composed of various components, including a bump pad, a charge injection circuit, a pre-amplifier, a discriminator, a digital-to-analog converter, and a time-to-digital converter. These components play essential roles as the front-end link in processing LGAD signals and measuring timing-related information. The peripheral circuits provide clock signals and readout functionalities. The size of the ETROC1 chip is 7 mm x 9 mm. ETROC1 has been fabricated in a 65 nm CMOS process, and extensively tested under stimuli of charge injection, infrared laser, and proton beam. The time resolution of bump-bonded ETROC1 + LGAD chipsets reaches 42 - 46 ps per hit in the beam test.
△ Less
Submitted 25 April, 2024; v1 submitted 22 April, 2024;
originally announced April 2024.
-
Near-Quantum-limited Haloscope Detection of Dark Photon Dark Matter Enhanced by a High-Q Superconducting Cavit
Authors:
Runqi Kang,
Man Jiao,
Yu Tong,
Yang Liu,
Youpeng Zhong,
Yi-Fu Cai,
**gwei Zhou,
Xing Rong,
Jiangfeng Du
Abstract:
We report new experimental results on the search for dark photons based on a near-quantum-limited haloscope equipped with a superconducting cavity. The loaded quality factor of the superconducting cavity is $6\times10^{5}$, so that the expected signal from dark photon dark matter can be enhanced by more than one order compared to a copper cavity. A Josephson parametric amplifier with a near-quantu…
▽ More
We report new experimental results on the search for dark photons based on a near-quantum-limited haloscope equipped with a superconducting cavity. The loaded quality factor of the superconducting cavity is $6\times10^{5}$, so that the expected signal from dark photon dark matter can be enhanced by more than one order compared to a copper cavity. A Josephson parametric amplifier with a near-quantum-limited noise temperature has been utilized to minimize the noise during the search. Furthermore, a digital acquisition card based on field programmable gate arrays has been utilized to maximize data collection efficiency with a duty cycle being 100$\%$. This work has established the most stringent constraints on dark photons at around 26.965 $μ$eV. In the future, our apparatus can be extended to search for other dark matter candidates, such as axions and axion-like particles, and scrutinize new physics beyond the Standard Model.
△ Less
Submitted 19 April, 2024;
originally announced April 2024.
-
Quantum Simulation of Open Quantum Dynamics via Non-Markovian Quantum State Diffusion
Authors:
Yukai Guo,
Xing Gao
Abstract:
Quantum simulation of non-Markovian open quantum dynamics is essential but challenging for standard quantum computers due to their non-Hermitian nature, leading to non-unitary evolution, and the limitations of available quantum resources. Here we introduce a hybrid quantum-classical algorithm designed for simulating dissipative dynamics in system with non-Markovian environment. Our approach includ…
▽ More
Quantum simulation of non-Markovian open quantum dynamics is essential but challenging for standard quantum computers due to their non-Hermitian nature, leading to non-unitary evolution, and the limitations of available quantum resources. Here we introduce a hybrid quantum-classical algorithm designed for simulating dissipative dynamics in system with non-Markovian environment. Our approach includes formulating a non-Markovian Stochastic Schrödinger equation with complex frequency modes (cNMSSE) where the non-Markovianity is characterized by the mode excitation. Following this, we utilize variational quantum simulation to capture the non-unitary evolution within the cNMSSE framework, leading to a substantial reduction in qubit requirements. To demonstrate our approach, we investigated the spin-boson model and dynamic quantum phase transitions (DQPT) within transverse field Ising model (TFIM). Significantly, our findings reveal the enhanced DQPT in TFIM due to non-Markovian behavior.
△ Less
Submitted 17 April, 2024; v1 submitted 16 April, 2024;
originally announced April 2024.
-
Picturing the Gap Between the Performance and US-DOE's Hydrogen Storage Target: A Data-Driven Model for MgH2 Dehydrogenation
Authors:
Chaoqun Li,
Weijie Yang,
Hao Liu,
Xinyuan Liu,
Xiu**g Xing,
Zhengyang Gao,
Shuai Dong,
Hao Li
Abstract:
Develo** solid-state hydrogen storage materials is as pressing as ever, which requires a comprehensive understanding of the dehydrogenation chemistry of a solid-state hydride. Transition state search and kinetics calculations are essential to understanding and designing high-performance solid-state hydrogen storage materials by filling in the knowledge gap that current experimental techniques ca…
▽ More
Develo** solid-state hydrogen storage materials is as pressing as ever, which requires a comprehensive understanding of the dehydrogenation chemistry of a solid-state hydride. Transition state search and kinetics calculations are essential to understanding and designing high-performance solid-state hydrogen storage materials by filling in the knowledge gap that current experimental techniques cannot measure. However, the ab initio analysis of these processes is computationally expensive and time-consuming. Searching for descriptors to accurately predict the energy barrier is urgently needed, to accelerate the prediction of hydrogen storage material properties and identify the opportunities and challenges in this field. Herein, we develop a data-driven model to describe and predict the dehydrogenation barriers of a typical solid-state hydrogen storage material, magnesium hydride (MgH2), based on the combination of the crystal Hamilton population orbital of Mg-H bond and the distance between atomic hydrogen. By deriving the distance energy ratio, this model elucidates the key chemistry of the reaction kinetics. All the parameters in this model can be directly calculated with significantly less computational cost than conventional transition state search, so that the dehydrogenation performance of hydrogen storage materials can be predicted efficiently. Finally, we found that this model leads to excellent agreement with typical experimental measurements reported to date and provides clear design guidelines on how to propel the performance of MgH2 closer to the target set by the United States Department of Energy (US-DOE).
△ Less
Submitted 29 April, 2024; v1 submitted 15 April, 2024;
originally announced April 2024.
-
Scalable photonic diffractive generators through sampling noises from scattering medium
Authors:
Ziyu Zhan,
Hao Wang,
Qiang Liu,
Xing Fu
Abstract:
Photonic computing, with potentials of high parallelism, low latency and high energy efficiency, have gained progressive interest at the forefront of neural network (NN) accelerators. However, most existing photonic computing accelerators concentrate on discriminative NNs. Large-scale generative photonic computing machines remain largely unexplored, partly due to poor data accessibility, accuracy…
▽ More
Photonic computing, with potentials of high parallelism, low latency and high energy efficiency, have gained progressive interest at the forefront of neural network (NN) accelerators. However, most existing photonic computing accelerators concentrate on discriminative NNs. Large-scale generative photonic computing machines remain largely unexplored, partly due to poor data accessibility, accuracy and hardware feasibility. Here, we harness random light scattering in disordered media as a native noise source and leverage large-scale diffractive optical computing to generate images from above noise, thereby achieving hardware consistency by solely pursuing the spatial parallelism of light. To realize experimental data accessibility, we design two encoding strategies between images and optical noise latent space that effectively solves the training problem. Furthermore, we utilize advanced photonic NN architectures including cascaded and parallel configurations of diffraction layers to enhance the image generation performance. Our results show that the photonic generator is capable of producing clear and meaningful synthesized images across several standard public datasets. As a photonic generative machine, this work makes an important contribution to photonic computing and paves the way for more sophisticated applications such as real world data augmentation and multi modal generation.
△ Less
Submitted 15 April, 2024;
originally announced April 2024.
-
First Search for Light Fermionic Dark Matter Absorption on Electrons Using Germanium Detector in CDEX-10 Experiment
Authors:
J. X. Liu,
L. T. Yang,
Q. Yue,
K. J. Kang,
Y. J. Li,
H. P. An,
Greeshma C.,
J. P. Chang,
Y. H. Chen,
J. P. Cheng,
W. H. Dai,
Z. Deng,
C. H. Fang,
X. P. Geng,
H. Gong,
Q. J. Guo,
T. Guo,
X. Y. Guo,
L. He,
J. R. He,
J. W. Hu,
H. X. Huang,
T. C. Huang,
L. Jiang,
S. Karmakar
, et al. (61 additional authors not shown)
Abstract:
We present the first results of the search for sub-MeV fermionic dark matter absorbed by electron targets of Germanium using the 205.4~kg$\cdot$day data collected by the CDEX-10 experiment, with the analysis threshold of 160~eVee. No significant dark matter (DM) signals over the background are observed. Results are presented as limits on the cross section of DM--electron interaction. We present ne…
▽ More
We present the first results of the search for sub-MeV fermionic dark matter absorbed by electron targets of Germanium using the 205.4~kg$\cdot$day data collected by the CDEX-10 experiment, with the analysis threshold of 160~eVee. No significant dark matter (DM) signals over the background are observed. Results are presented as limits on the cross section of DM--electron interaction. We present new constraints of cross section in the DM range of 0.1--10 keV/$c^2$ for vector and axial-vector interaction. The upper limit on the cross section is set to be $\rm 5.5\times10^{-46}~cm^2$ for vector interaction, and $\rm 1.8\times10^{-46}~cm^2$ for axial-vector interaction at DM mass of 5 keV/$c^2$.
△ Less
Submitted 15 April, 2024;
originally announced April 2024.
-
Dualtronics: leveraging both faces of polar semiconductors
Authors:
Len van Deurzen,
Eungkyun Kim,
Naomi Pieczulewski,
Zexuan Zhang,
Anna Feduniewicz-Zmuda,
Mikolaj Chlipala,
Marcin Siekacz,
David Muller,
Huili Grace Xing,
Debdeep Jena,
Henryk Turski
Abstract:
Unlike non-polar semiconductors such as silicon, the broken inversion symmetry of the wide bandgap semiconductor gallium nitride leads to a large electronic polarization along a unique crystal axis. This makes the two surfaces of the semiconductor wafer perpendicular to the polar axis dramatically different in their physical and chemical properties. In the last three decades, the cation (gallium)…
▽ More
Unlike non-polar semiconductors such as silicon, the broken inversion symmetry of the wide bandgap semiconductor gallium nitride leads to a large electronic polarization along a unique crystal axis. This makes the two surfaces of the semiconductor wafer perpendicular to the polar axis dramatically different in their physical and chemical properties. In the last three decades, the cation (gallium) face of gallium nitride has been used for photonic devices such as LEDs and lasers. Though the cation face has also been predominantly used for electronic devices, the anion (nitrogen) face has recently shown promise for high electron mobility transistors due to favorable polarization discontinuities. In this work we show that it is possible to make photonic devices on the cation face, and electronic devices on the anion face, of the same semiconductor wafer. This opens the possibility for dualtronics in polar semiconductors, where electronic, photonic, and acoustic properties can be implemented on opposite faces of the same wafer, dramatically enhancing the functional capabilities of this revolutionary semiconductor family.
△ Less
Submitted 4 April, 2024;
originally announced April 2024.
-
Performant Automatic Differentiation of Local Coupled Cluster Theories: Response Properties and Ab Initio Molecular Dynamics
Authors:
Xing Zhang,
Chenghan Li,
Hong-Zhou Ye,
Timothy C. Berkelbach,
Garnet Kin-Lic Chan
Abstract:
In this work, we introduce a differentiable implementation of the local natural orbital coupled cluster (LNOCC) method within the automatic differentiation framework of the PySCFAD package. The implementation is comprehensively tuned for enhanced performance, which enables the calculation of first-order static response properties on medium-sized molecular systems using coupled cluster theory with…
▽ More
In this work, we introduce a differentiable implementation of the local natural orbital coupled cluster (LNOCC) method within the automatic differentiation framework of the PySCFAD package. The implementation is comprehensively tuned for enhanced performance, which enables the calculation of first-order static response properties on medium-sized molecular systems using coupled cluster theory with single, double, and perturbative triple excitations [CCSD(T)]. We evaluate the accuracy of our method by benchmarking it against the canonical CCSD(T) reference for nuclear gradients, dipole moments, and geometry optimizations. In addition, we demonstrate the possibility of property calculations for chemically interesting systems through the computation of bond orders and Mössbauer spectroscopy parameters for a [NiFe]-hydrogenase active site model, along with the simulation of infrared (IR) spectra via ab initio LNO-CC molecular dynamics for a protonated water hexamer.
△ Less
Submitted 2 June, 2024; v1 submitted 3 April, 2024;
originally announced April 2024.
-
Constraints on the Blazar-Boosted Dark Matter from the CDEX-10 Experiment
Authors:
R. Xu,
L. T. Yang,
Q. Yue,
K. J. Kang,
Y. J. Li,
H. P. An,
Greeshma C.,
J. P. Chang,
Y. H. Chen,
J. P. Cheng,
W. H. Dai,
Z. Deng,
C. H. Fang,
X. P. Geng,
H. Gong,
Q. J. Guo,
T. Guo,
X. Y. Guo,
L. He,
S. M. He,
J. W. Hu,
H. X. Huang,
T. C. Huang,
L. Jiang,
S. Karmakar
, et al. (59 additional authors not shown)
Abstract:
We report new constraints on light dark matter (DM) boosted by blazars using the 205.4 kg day data from the CDEX-10 experiment located at the China **** Underground Laboratory. Two representative blazars, TXS 0506+56 and BL Lacertae are studied. The results derived from TXS 0506+56 exclude DM-nucleon elastic scattering cross sections from $4.6\times 10^{-33}\ \rm cm^2$ to…
▽ More
We report new constraints on light dark matter (DM) boosted by blazars using the 205.4 kg day data from the CDEX-10 experiment located at the China **** Underground Laboratory. Two representative blazars, TXS 0506+56 and BL Lacertae are studied. The results derived from TXS 0506+56 exclude DM-nucleon elastic scattering cross sections from $4.6\times 10^{-33}\ \rm cm^2$ to $1\times10^{-26}\ \rm cm^2$ for DM masses between 10 keV and 1 GeV, and the results derived from BL Lacertae exclude DM-nucleon elastic scattering cross sections from $2.4\times 10^{-34}\ \rm cm^2$ to $1\times10^{-26}\ \rm cm^2$ for the same range of DM masses. The constraints correspond to the best sensitivities among solid-state detector experiments in the sub-MeV mass range.
△ Less
Submitted 29 March, 2024;
originally announced March 2024.
-
Probing Dark Matter Particles from Evaporating Primordial Black Holes via Electron Scattering in the CDEX-10 Experiment
Authors:
Z. H. Zhang,
L. T. Yang,
Q. Yue,
K. J. Kang,
Y. J. Li,
H. P. An,
Greeshma C.,
J. P. Chang,
Y. H. Chen,
J. P. Cheng,
W. H. Dai,
Z. Deng,
C. H. Fang,
X. P. Geng,
H. Gong,
Q. J. Guo,
T. Guo,
X. Y. Guo,
L. He,
S. M. He,
J. W. Hu,
H. X. Huang,
T. C. Huang,
L. Jiang,
S. Karmakar
, et al. (59 additional authors not shown)
Abstract:
Dark matter (DM) is a major constituent of the Universe. However, no definite evidence of DM particles (denoted as ``$χ$") has been found in DM direct detection (DD) experiments to date. There is a novel concept that detecting $χ$ from evaporating primordial black holes (PBHs). We search for $χ$ emitted from PBHs by investigating their interaction with target electrons. The examined PBH masses ran…
▽ More
Dark matter (DM) is a major constituent of the Universe. However, no definite evidence of DM particles (denoted as ``$χ$") has been found in DM direct detection (DD) experiments to date. There is a novel concept that detecting $χ$ from evaporating primordial black holes (PBHs). We search for $χ$ emitted from PBHs by investigating their interaction with target electrons. The examined PBH masses range from 1$\times$10$^{15}$ to 7$\times$10$^{16}$ g under the current limits of PBH abundance $f_{PBH}$. Using 205.4 kg$\cdot$day data obtained from the CDEX-10 experiment conducted in the China **** Underground Laboratory, we exclude the $χ$--electron ($χ$--$e$) elastic-scattering cross section $σ_{χe} \sim 5\times10^{-29}$ cm$^2$ for $χ$ with a mass $m_χ\lesssim$ 0.1 keV from our results. If ($m_χ$, $σ_{χe}$) can be determined in the future, DD experiments are expected to impose strong constraints on $f_{PBH}$ for large $M_{PBH}$s.
△ Less
Submitted 29 March, 2024;
originally announced March 2024.
-
IQMDose3D: a software tool for reconstructing the dose in patient using patient planning CT images and the signals measured by IQM detector
Authors:
Aitang Xing,
Gary Goozee,
Alison Gray,
Vaughan Moutrie,
Sankar Arumugam,
Shrikant Deshpande,
Anthony Espinoza,
Vasilis Kondilis,
Marjorie McDonald,
Philip Vial
Abstract:
The integral quality monitor (IQM) system compares the signal measured with a large volume chamber mounted to the linear accelerator's head to the signal calculated using the patient DICOM RT plan for patient-specific quality assurance (PSQA). A method was developed to reconstruct the dose in patients using the signal measured by IQM chamber and patient planning CT images. A software tool named IQ…
▽ More
The integral quality monitor (IQM) system compares the signal measured with a large volume chamber mounted to the linear accelerator's head to the signal calculated using the patient DICOM RT plan for patient-specific quality assurance (PSQA). A method was developed to reconstruct the dose in patients using the signal measured by IQM chamber and patient planning CT images. A software tool named IQMDose3D was implemented to automate this procedure and integrated into the IQM-based PSQA workflow. IQMDose3D enables the physicists to evaluate PSQA by focusing on the clinical perspective by comparing the delivered plan to the approved clinical plan in terms of the clinical goals, dose-volume histogram (DVH) in addition to the three-dimensional (3D) gamma map and gamma pass rate.
△ Less
Submitted 29 March, 2024; v1 submitted 26 March, 2024;
originally announced March 2024.
-
Compensating for charge sharing by a deep-learning method: a preliminary experimental study
Authors:
Shengzi Zhao,
Le Shen,
Yuxing Xing
Abstract:
Photon counting detectors (PCDs) bring valuable advantages to diagnostic computed tomography (CT), including lower noise and higher resolution than energy integrating detectors. However, there are still several nonideal factors preventing PCDs from meeting people's expectations, for example, charge sharing and pile up. In this paper, we did some preliminary work on charge sharing and conducted an…
▽ More
Photon counting detectors (PCDs) bring valuable advantages to diagnostic computed tomography (CT), including lower noise and higher resolution than energy integrating detectors. However, there are still several nonideal factors preventing PCDs from meeting people's expectations, for example, charge sharing and pile up. In this paper, we did some preliminary work on charge sharing and conducted an experimental study using an XCounter PCD to compare the effects of no anti-coincidence, anti-coincidence by hardware and charge sharing compensation by a deep learning method. In our results, a smaller bias and standard deviation are obtained from deep learning method than directly from no-anti-coincidence mode of the detector. Our network also outperforms the anti-coincidence mode of the detector in the low energy bin and has smaller standard deviation in the high energy bin. The results validate that a deep learning method is suitable to compensate for charge sharing.
△ Less
Submitted 26 March, 2024;
originally announced March 2024.
-
AutoMRISimQA: an automated system for daily quality control of a 3T MRI simulator
Authors:
Aitang Xing,
Gary Goozee,
Gary Liney,
Sankar Arumugam,
Shrikant Deshpande,
Anthony Espinoza,
Alison Gray,
Vasilis Kondilis,
Doaa Elwadia,
Robba Rai,
Lois Holloway
Abstract:
A software system named AutoMRISimQA was developed to monitor the daily performance of a wide-bore 3T scanner(MRI) which was designed and dedicated to radiotherapy simulation. The system can monitor the performance of the MRI simulator not only by using image quality indices such as signal-to-noise ratio (SNR), uniformity, ghosting and contrast but also performing a quick check of geometry accurac…
▽ More
A software system named AutoMRISimQA was developed to monitor the daily performance of a wide-bore 3T scanner(MRI) which was designed and dedicated to radiotherapy simulation. The system can monitor the performance of the MRI simulator not only by using image quality indices such as signal-to-noise ratio (SNR), uniformity, ghosting and contrast but also performing a quick check of geometry accuracy as well as the external lasers quantitatively. It was implemented into the daily clinically workflow in 2013 and has been used for more than 10 years. It was also seamlessly integrated with QAtrack, allowing continuous monitoring of the consistency of the MRI simulator's performance.
△ Less
Submitted 29 March, 2024; v1 submitted 26 March, 2024;
originally announced March 2024.
-
Sha** a Surface Microdroplet by Marangoni Forces along a Moving Contact Line of Four Immiscible Phases
Authors:
Haichang Yang,
Binglin Zeng,
Qiuyun Lu,
Yaowen Xing,
Xiahui Gui,
Yijun Cao,
Ben Bin Xu,
Xuehua Zhang
Abstract:
The ability to transfer microdroplets between fluid phases offers numerous advantages in various fields, enabling better control, manipulation, and utilization of small volumes of fluids in pharmaceutical formulations, microfluidics, and lab-on-a-chip devices, single-cell analysis or droplet-based techniques for nanomaterial synthesis. This study focuses on the stability and morphology of a sessil…
▽ More
The ability to transfer microdroplets between fluid phases offers numerous advantages in various fields, enabling better control, manipulation, and utilization of small volumes of fluids in pharmaceutical formulations, microfluidics, and lab-on-a-chip devices, single-cell analysis or droplet-based techniques for nanomaterial synthesis. This study focuses on the stability and morphology of a sessile oil microdroplet at the four-phase contact line of solid-water-oil-air during the droplet transfer from underwater to air. We observed a distinct transition in microdroplet dynamics, characterized by a shift from a scenario dominated by Marangoni forces to one dominated by capillary forces. In the regime dominated by Marangoni forces, the oil microdroplets spread in response to the contact between the water-air interface and the water-oil interface and the emergence of an oil concentration gradient along the water-air interface. The spreading distance along the four-phase contact line follows a power law relationship of $t^{3/4}$, reflecting the balance between Marangoni forces and viscous forces. On the other hand, in the capillarity-dominated regime, the oil microdroplets remain stable at the contact line and after being transferred into the air. We identify the crossover between these two regimes in the parameter space defined by three factors: the approaching velocity of the solid-water-air contact line ($v_{cl}$), the radius of the oil microdroplet ($r_o$), and the radius of the water drop ($r_w$). Furthermore, we demonstrate how to use the four-phase contact line for sha** oil microdroplets using a full liquid process by the contact line lithography. The findings in this study may be also applied to materials synthesis where nanoparticles, microspheres, or nanocapsules are produced by microdroplet-based techniques.
△ Less
Submitted 24 March, 2024;
originally announced March 2024.
-
Observation of sub-Poissonian correlation in spin-orbit coupled polariton vortex pairs at room temperature
Authors:
Xiaokun Zhai,
Ying Gao,
Xuekai Ma,
Chunzi Xing,
Xiao Wang,
Anlian Pan,
Marc Assmann,
Stefan Schumacher,
Tingge Gao
Abstract:
Coupling of orbital and spin degrees of freedom gives rise to intriguing physical phenomena in bosonic condensates, such as formation of stripe phases and domains with vortex arrays. However, the robust locking of spin and orbital degrees of freedom of the nonlinear topological objects such as vortex pairs with sub-Poissonian fluctuation in bosonic condensates remains challenging. In the present w…
▽ More
Coupling of orbital and spin degrees of freedom gives rise to intriguing physical phenomena in bosonic condensates, such as formation of stripe phases and domains with vortex arrays. However, the robust locking of spin and orbital degrees of freedom of the nonlinear topological objects such as vortex pairs with sub-Poissonian fluctuation in bosonic condensates remains challenging. In the present work, we realize a non-equilibrium room-temperature condensate in a liquid crystal (LC) planar photonic microcavity with the perovskite CsPbBr3 as optically active material. We use the interplay of TE-TM mode splitting and Rashba-Dresselhaus spin-orbit coupling (RDSOC) to realize electrically tunable polariton vortex pairs with locked spin and orbital angular momentum. Remarkably, the counts difference between opposite wavevector states shows sub-Poissonian fluctuation, indicating the existence of the correlation between the two vortices. Our results are robust against sample imperfections and pave the way to investigate coupling and locking of correlated vortex orbital and spin degrees of freedom in a quantum fluid of light at room temperature, offering potential for generation of complex squeezed states of light for quantum optical information processing with optoelectronic chips
△ Less
Submitted 5 June, 2024; v1 submitted 22 March, 2024;
originally announced March 2024.
-
Offline tagging of radon-induced backgrounds in XENON1T and applicability to other liquid xenon detectors
Authors:
E. Aprile,
J. Aalbers,
K. Abe,
S. Ahmed Maouloud,
L. Althueser,
B. Andrieu,
E. Angelino,
J. R. Angevaare,
D. Antón Martin,
F. Arneodo,
L. Baudis,
A. L. Baxter,
M. Bazyk,
L. Bellagamba,
R. Biondi,
A. Bismark,
E. J. Brookes,
A. Brown,
G. Bruno,
R. Budnik,
T. K. Bui,
J. M. R. Cardoso,
A. P. Cimental Chavez,
A. P. Colijn,
J. Conrad
, et al. (142 additional authors not shown)
Abstract:
This paper details the first application of a software tagging algorithm to reduce radon-induced backgrounds in liquid noble element time projection chambers, such as XENON1T and XENONnT. The convection velocity field in XENON1T was mapped out using $^{222}\text{Rn}$ and $^{218}\text{Po}$ events, and the root-mean-square convection speed was measured to be $0.30 \pm 0.01$ cm/s. Given this velocity…
▽ More
This paper details the first application of a software tagging algorithm to reduce radon-induced backgrounds in liquid noble element time projection chambers, such as XENON1T and XENONnT. The convection velocity field in XENON1T was mapped out using $^{222}\text{Rn}$ and $^{218}\text{Po}$ events, and the root-mean-square convection speed was measured to be $0.30 \pm 0.01$ cm/s. Given this velocity field, $^{214}\text{Pb}$ background events can be tagged when they are followed by $^{214}\text{Bi}$ and $^{214}\text{Po}$ decays, or preceded by $^{218}\text{Po}$ decays. This was achieved by evolving a point cloud in the direction of a measured convection velocity field, and searching for $^{214}\text{Bi}$ and $^{214}\text{Po}$ decays or $^{218}\text{Po}$ decays within a volume defined by the point cloud. In XENON1T, this tagging system achieved a $^{214}\text{Pb}$ background reduction of $6.2^{+0.4}_{-0.9}\%$ with an exposure loss of $1.8\pm 0.2 \%$, despite the timescales of convection being smaller than the relevant decay times. We show that the performance can be improved in XENONnT, and that the performance of such a software-tagging approach can be expected to be further improved in a diffusion-limited scenario. Finally, a similar method might be useful to tag the cosmogenic $^{137}\text{Xe}$ background, which is relevant to the search for neutrinoless double-beta decay.
△ Less
Submitted 19 June, 2024; v1 submitted 21 March, 2024;
originally announced March 2024.
-
Electrically controlled nonvolatile switching of single-atom magnetism in a Dy@C84 single-molecule transistor
Authors:
Feng Wang,
Wangqiang Shen,
Yuan Shui,
Jun Chen,
Huaiqiang Wang,
Rui Wang,
Yuyuan Qin,
Xuefeng Wang,
Jianguo Wan,
Minhao Zhang,
Xing Lu,
Tao Yang,
Fengqi Song
Abstract:
Single-atom magnetism switching is a key technique towards the ultimate data storage density of computer hard disks and has been conceptually realized by leveraging the spin bistability of a magnetic atom under a scanning tunnelling microscope. However, it has rarely been applied to solid-state transistors, an advancement that would be highly desirable for enabling various applications. Here, we d…
▽ More
Single-atom magnetism switching is a key technique towards the ultimate data storage density of computer hard disks and has been conceptually realized by leveraging the spin bistability of a magnetic atom under a scanning tunnelling microscope. However, it has rarely been applied to solid-state transistors, an advancement that would be highly desirable for enabling various applications. Here, we demonstrate realization of the electrically controlled Zeeman effect in Dy@C84 single-molecule transistors, thus revealing a transition in the magnetic moment from 3.8 μB to 5.1 μB for the ground-state GN at an electric field strength of 3-10 MV/cm. The consequent magnetoresistance significantly increases from 600% to 1100% at the resonant tunneling point. Density functional theory calculations further corroborate our realization of nonvolatile switching of single-atom magnetism, and the switching stability emanates from an energy barrier of 92 meV for atomic relaxation. These results highlight the potential of using endohedral metallofullerenes for high-temperature, high-stability, high-speed, and compact single-atom magnetic data storage.
△ Less
Submitted 17 March, 2024;
originally announced March 2024.
-
Broadband transmissive polarization rotator by gradiently-twisted $α$-MoO$_3$
Authors:
Songyan Hou,
Hao Hu,
Zhihong Liu,
Weichuan Xing,
**cheng Zhang
Abstract:
Polarization engineering has been proven to enhance the capabilities of light manipulation and thus facilitate the development of integrated photonic devices. In this study, we introduce a polarization rotator based on gradiently-twisted $α$-MoO$_3$ thin film, that works for the mid infrared range and functions in a transmission mode. To be specific, the proposed device is constructed by gradientl…
▽ More
Polarization engineering has been proven to enhance the capabilities of light manipulation and thus facilitate the development of integrated photonic devices. In this study, we introduce a polarization rotator based on gradiently-twisted $α$-MoO$_3$ thin film, that works for the mid infrared range and functions in a transmission mode. To be specific, the proposed device is constructed by gradiently-twisted $α$-MoO$_3$ multilayers with a subwavelength thickness of only 5 microns, namely, one-third of the working wavelength. Our analytical calculation demonstrates the efficacy of this subwavelength thin film rotator in converting a linearly polarized wave into its orthogonal counterpart, thanks to its chiral nature. The twisted $α$-MoO$_3$ multilayers exhibit the capability to significantly manipulate dispersion characteristics while maintaining low optical losses, thereby enabling a wide bandwidth exceeding 2.5 THz with a polarization ratio surpassing 17 dB. Moreover, the operational frequency can be adjusted across a 3.4 THz range by altering the incident angle of the incident waves. This adaptable design, characterized by its polarization versatility, can be customized to suit practical applications within wireless communication, radar systems, optical switching, and imaging technologies.
△ Less
Submitted 2 March, 2024;
originally announced March 2024.
-
Tunable double notch filter on thin-film lithium niobate platform
Authors:
Songyan Hou,
Hao Hu,
Zhihong Liu,
Weichuan Xing,
**cheng Zhang,
Yue Hao
Abstract:
Tunable optical filter at the chip scale plays a crucial role in fulfilling the need for the reconfigurability in channel routing, optical switching, and wavelength division multiplexing systems. In this letter, we propose a tunable double notch filter on thin-film lithium niobate using dual micro-ring architecture. This unique integrated filter is essential for complex photonic integrated circuit…
▽ More
Tunable optical filter at the chip scale plays a crucial role in fulfilling the need for the reconfigurability in channel routing, optical switching, and wavelength division multiplexing systems. In this letter, we propose a tunable double notch filter on thin-film lithium niobate using dual micro-ring architecture. This unique integrated filter is essential for complex photonic integrated circuits, along with multiple channels and various frequency spacing. With only one loaded voltage, the device demonstrates a wide frequency spacing tunability from 16.1 GHz to 89.9 GHz by reversely tunning the resonances of the two micro-rings while the center wavelength between the two resonances remains unaltered. Moreover, by utilizing the pronounced electro-optic properties of lithium niobate, associated with the tight light confinement nanophotonic waveguides, the device demonstrates a spacing tunability of 0.82 GHz/V and a contrast of 10~16 dB. In addition, the device has an ultracompact footprint of 0.0248 mm2.
△ Less
Submitted 2 March, 2024;
originally announced March 2024.