Showing 1–50 of 95 results for author: Xie, W

Orbit symmetry breaking in MXene implements enhanced soft bioelectronic implants

Authors: Yizhang Wu, Yuan Li, Yihan Liu, Dashuai Zhu, Sicheng Xing, Noah Lambert, Hannah Weisbecker, Siyuan Liu, Brayden Davis, Lin Zhang, Meixiang Wang, Gongkai Yuan, Chris Zhoufan You, Anran Zhang, Cate Duncan, Wanrong Xie, Yihang Wang, Yong Wang, Sreya Kanamurlapudi, Garcia-Guzman Evert, Arjun Putcha, Michael D. Dickey, Ke Huang, Wubin Bai

Abstract: Bioelectronic implants with soft mechanics, biocompatibility, and excellent electrical performance enable biomedical implants to record electrophysiological signals and execute interventions within internal organs, promising to revolutionize the diagnosing, monitoring, and treatment of various pathological conditions. However, challenges remain in improving excessive impedance at the bioelectronic… ▽ More Bioelectronic implants with soft mechanics, biocompatibility, and excellent electrical performance enable biomedical implants to record electrophysiological signals and execute interventions within internal organs, promising to revolutionize the diagnosing, monitoring, and treatment of various pathological conditions. However, challenges remain in improving excessive impedance at the bioelectronic-tissue interface and thus the efficacy of electrophysiological signaling and intervention. Here, we devise orbit symmetry breaking in MXene (a low-cost scalability, biocompatible, and conductive 2D layered material, that we refer to as OBXene), that exhibits low bioelectronic-tissue impedance, originating from the out-of-plane charge transfer. Furthermore, the Schottky-induced piezoelectricity stemming from the asymmetric orbital configuration of OBXene facilitates interlayered charge transport in the device. In this study, we report an OBXene-based cardiac patch applied on the left ventricular epicardium of both rodent and porcine models to enable spatiotemporal epicardium map** and pacing, while coupling the wireless and battery-free operation for long-term real-time recording and closed-loop stimulation. △ Less

Submitted 19 June, 2024; originally announced June 2024.

Numerical Modeling of Transient Absorption in Hybrid Dual-Plasmonic Au/CuS Nanostructures

Authors: Atefeh Habibpourmoghadam, Wenyong Xie, Patrick Bessel, André Niebur, Artsiom Antanovich, Dirk Dorfs, Jannika Lauth, Antonio Calà Lesina

Abstract: Transient absorption in plasmonic materials has recently attracted attention of the chemistry and optics communities as a technique to understand dynamic processes and hot carriers generation on ultrafast timescales. In this context, hybrid Au/CuS nanostructures were recently investigated via ultrafast pump-probe transient absorption spectroscopy revealing an exotic dual-plasmonic behavior. Namely… ▽ More Transient absorption in plasmonic materials has recently attracted attention of the chemistry and optics communities as a technique to understand dynamic processes and hot carriers generation on ultrafast timescales. In this context, hybrid Au/CuS nanostructures were recently investigated via ultrafast pump-probe transient absorption spectroscopy revealing an exotic dual-plasmonic behavior. Namely, the excitation of a localized surface plasmon resonance (LSPR) in Au (pump at 551 nm) or CuS (pump at 1051 nm), leads to a transient response in the counterpart. This phenomenon was attributed to Landau dam**, which stems from hot carrier generation and injection mechanisms at the interface between the two materials. Here, we employ numerical modeling to further clarify the origin of such response in hybrid Au/CuS nanostructures. The geometry of the hybrid nanostructures is first investigated via steady-state simulations (only probe), confirming an UFO-shaped configuration. We provide clarification on the role of the size ratio between Au and CuS. Finally, we present the simulation of transient absorption in the pump-probe regime, which qualitatively replicates our experimental observations, thus identifying the plasmonic response modified via Landau dam** as the main governing mechanism. Our numerical approach provides an important tool for the modeling of transient absorption spectroscopy and can support experimental research on dual-plasmonic materials for applications in spectroscopy, photocatalysis, thermoplasmonics, sensing, and energy harvesting. △ Less

Submitted 14 June, 2024; originally announced June 2024.

Comments: 19 pages, 9 figures

Effect of Halogen Substituents on Charge Transport Properties of n-type Organic Semiconductors: A Theoretical Study

Authors: Sara Roosta, Marcus Elstner, Weiwei Xie

Abstract: Organic semiconductors (OSCs) have received much attention as promising materials for electronic devices. In this study, we investigate the impact of halogen groups on the charge transport properties of n-type OSC-6,13 bis ((triisopropylsilyl) ethynyl)-5,7,12,14-tetraazapentacene (TIPS-TAP). The computed mobilities for TAPs substituted with F and Cl exhibit excellent agreement with the experimenta… ▽ More Organic semiconductors (OSCs) have received much attention as promising materials for electronic devices. In this study, we investigate the impact of halogen groups on the charge transport properties of n-type OSC-6,13 bis ((triisopropylsilyl) ethynyl)-5,7,12,14-tetraazapentacene (TIPS-TAP). The computed mobilities for TAPs substituted with F and Cl exhibit excellent agreement with the experimental values, while the simulation overestimates the electron mobility for TAP. Interestingly, the mobility of TIPS-TAP-4F is significantly lower than that of TIPS-TAP-4Cl/Br, despite their similar packing structures. This discrepancy can be attributed to the strong electron-withdrawing effect of fluoride, leading to reduced electron transfer integrals and increased reorganization energy. While molecular packing is widely accepted as a dominant factor in charge transport in OSCs, our study highlights the essential role of electronic effects in OSC charge transport. This study provides new insights into the understanding of the charge transport mechanism in OSCs. △ Less

Submitted 27 May, 2024; originally announced May 2024.

Resolving turbulence and drag over textured surfaces using texture-less simulations: the case of slip/no-slip textures

Authors: Wenxiong Xie, Chris T Fairhall, Ricardo García-Mayoral

Abstract: We study the effect of surface texture on an overlying turbulent flow for the case of textures made of an alternating slip/no-slip pattern, a common model for superhydrophobic surfaces but also a particularly simple form of texture. For texture sizes $L^+ \lesssim 20$, we have previously reported that turbulence remained smooth-wall-like, other than experiencing an apparent origin offset for diffe… ▽ More We study the effect of surface texture on an overlying turbulent flow for the case of textures made of an alternating slip/no-slip pattern, a common model for superhydrophobic surfaces but also a particularly simple form of texture. For texture sizes $L^+ \lesssim 20$, we have previously reported that turbulence remained smooth-wall-like, other than experiencing an apparent origin offset for different flow components. For slip/no-slip textures, this effect reduced to the flow experiencing slip conditions in the streamwise and spanwise directions and zero transpiration at the surface. The overlying turbulence effectively perceived such boundary conditions at least up to texture sizes $L^+ \approx 50$. However, beyond $L^+ \approx 20$ the texture interacted with the overlying turbulence in a non-homogeneous fashion, additional Reynolds stresses arose and turbulence was no longer smooth-wall-like. This is the typical effect of surface texture observed for rough surfaces, and results in an increase in drag relative to smooth-wall flows. In this paper, we argue that this occurs because the texture modifies the overlying turbulence through non-linear, cross-advective terms between the background turbulence and the texture-coherent flow directly induced by the surface topology. To verify this, we conduct homogeneous-slip-length simulations where we introduce additional, forcing terms in the Navier-Stokes equations to capture the effect of this non-linear interaction on the background turbulence. The interaction can then be accounted for without the need to resolve the surface texture. We show that the additional terms quantitatively capture the changes in the flow up to texture sizes $L^+ \approx 70$--$100$, including not just the roughness function but also the flow statistics and structure. △ Less

Submitted 8 April, 2024; originally announced April 2024.

Comments: 33 pages, 24 figures

Mass production and performance study on the 20-inch PMT acrylic protection covers in JUNO

Authors: Miao He, Zhonghua Qin, Diru Wu, Meihang Xu, Wan Xie, Fang Chen, ** **g, Genhua Yin, Shengjiong Yin, Linhua Gu, Xiaofeng Xia, Qinchang Wang

Abstract: The Jiangmen Underground Neutrino Observatory is a neutrino experiment that incorporates 20,012 20-inch photomultiplier tubes (PMTs) and 25,600 3-inch PMTs. A dedicated system was designed to protect the PMTs from an implosion chain reaction underwater. As a crucial element of the protection system, over 20,000 acrylic covers were manufactured through injection molding, ensuring high dimensional p… ▽ More The Jiangmen Underground Neutrino Observatory is a neutrino experiment that incorporates 20,012 20-inch photomultiplier tubes (PMTs) and 25,600 3-inch PMTs. A dedicated system was designed to protect the PMTs from an implosion chain reaction underwater. As a crucial element of the protection system, over 20,000 acrylic covers were manufactured through injection molding, ensuring high dimensional precision, mechanical strength, and transparency. This paper presents the manufacturing technology, mass production process, and performance characteristics of the acrylic covers. △ Less

Submitted 25 February, 2024; originally announced February 2024.

Comments: 12 pages, 10 figures

Automated interpretation of congenital heart disease from multi-view echocardiograms

Authors: **g Wang, Xiaofeng Liu, Fangyun Wang, Lin Zheng, Fengqiao Gao, Hanwen Zhang, Xin Zhang, Wanqing Xie, Binbin Wang

Abstract: Congenital heart disease (CHD) is the most common birth defect and the leading cause of neonate death in China. Clinical diagnosis can be based on the selected 2D key-frames from five views. Limited by the availability of multi-view data, most methods have to rely on the insufficient single view analysis. This study proposes to automatically analyze the multi-view echocardiograms with a practical… ▽ More Congenital heart disease (CHD) is the most common birth defect and the leading cause of neonate death in China. Clinical diagnosis can be based on the selected 2D key-frames from five views. Limited by the availability of multi-view data, most methods have to rely on the insufficient single view analysis. This study proposes to automatically analyze the multi-view echocardiograms with a practical end-to-end framework. We collect the five-view echocardiograms video records of 1308 subjects (including normal controls, ventricular septal defect (VSD) patients and atrial septal defect (ASD) patients) with both disease labels and standard-view key-frame labels. Depthwise separable convolution-based multi-channel networks are adopted to largely reduce the network parameters. We also approach the imbalanced class problem by augmenting the positive training samples. Our 2D key-frame model can diagnose CHD or negative samples with an accuracy of 95.4\%, and in negative, VSD or ASD classification with an accuracy of 92.3\%. To further alleviate the work of key-frame selection in real-world implementation, we propose an adaptive soft attention scheme to directly explore the raw video data. Four kinds of neural aggregation methods are systematically investigated to fuse the information of an arbitrary number of frames in a video. Moreover, with a view detection module, the system can work without the view records. Our video-based model can diagnose with an accuracy of 93.9\% (binary classification), and 92.1\% (3-class classification) in a collected 2D video testing set, which does not need key-frame selection and view annotation in testing. The detailed ablation study and the interpretability analysis are provided. △ Less

Submitted 30 November, 2023; originally announced November 2023.

Comments: Published in Medical Image Analysis

Journal ref: Medical Image Analysis (Volume 69, April 2021, 101942)

Theoretical and experimental study of attenuation in cancellous bone

Authors: Wenyi Xu, Weiya Xie, Dong Yu, Haohan Sun, Ying Gu, Xingliang Tao, Menglu Qian, Liming Cheng, Hao Wang, Qian Cheng

Abstract: Photoacoustic (PA) technology can provide information on both the physical structure and chemical composition of bone, showing great potential in bone assessment. However, due to the complex composition and porous structure of cancellous bone, the PA signals generated and propagated in cancellous bone are complex and difficult to be directly used in cancellous bone analysis. In this paper, a photo… ▽ More Photoacoustic (PA) technology can provide information on both the physical structure and chemical composition of bone, showing great potential in bone assessment. However, due to the complex composition and porous structure of cancellous bone, the PA signals generated and propagated in cancellous bone are complex and difficult to be directly used in cancellous bone analysis. In this paper, a photoacoustic differential attenuation spectrum (PA-DAS) method is proposed. By eliminating the PA spectrum of the optical absorption sources, the propagation attenuation characteristics of cancellous bone are studied theoretically and experimentally. An analytical solution for the propagation attenuation of broadband ultrasound waves in cancellous bone is given by applying high-frequency and viscous corrections to Biot's theory. An experimental system of PA-DAS with an eccentric excitation differential detection system is established to obtain the PA-DAS of cancellous bone and its acoustic propagation characteristic on the rabbit osteoporosis model. The PA-DAS quantization parameter slope is further extracted to quantify the attenuation of high and low frequency components. The results show that the PA-DAS can distinguish osteoporotic bone from normal bone, enabling quantitative assessment of bone mineral density and the diagnosis of osteoporosis. △ Less

Submitted 28 November, 2023; originally announced November 2023.

Comments: 21 pages, 9 figures, 2 tables

Journal ref: Wenyi Xu, Weiya Xie, Dong Yu, Haohan Sun, Ying Gu, Xingliang Tao, Menglu Qian, Liming Cheng, Hao Wang, Qian Cheng, Theoretical and experimental study of attenuation in cancellous bone, J. Biomed. Opt. 29(S1), S11526 (2024)

Vicinal Feature Statistics Augmentation for Federated 3D Medical Volume Segmentation

Authors: Yongsong Huang, Wanqing Xie, Mingzhen Li, Mingmei Cheng, **zhou Wu, Weixiao Wang, Jane You, Xiaofeng Liu

Abstract: Federated learning (FL) enables multiple client medical institutes collaboratively train a deep learning (DL) model with privacy protection. However, the performance of FL can be constrained by the limited availability of labeled data in small institutes and the heterogeneous (i.e., non-i.i.d.) data distribution across institutes. Though data augmentation has been a proven technique to boost the g… ▽ More Federated learning (FL) enables multiple client medical institutes collaboratively train a deep learning (DL) model with privacy protection. However, the performance of FL can be constrained by the limited availability of labeled data in small institutes and the heterogeneous (i.e., non-i.i.d.) data distribution across institutes. Though data augmentation has been a proven technique to boost the generalization capabilities of conventional centralized DL as a "free lunch", its application in FL is largely underexplored. Notably, constrained by costly labeling, 3D medical segmentation generally relies on data augmentation. In this work, we aim to develop a vicinal feature-level data augmentation (VFDA) scheme to efficiently alleviate the local feature shift and facilitate collaborative training for privacy-aware FL segmentation. We take both the inner- and inter-institute divergence into consideration, without the need for cross-institute transfer of raw data or their mixup. Specifically, we exploit the batch-wise feature statistics (e.g., mean and standard deviation) in each institute to abstractly represent the discrepancy of data, and model each feature statistic probabilistically via a Gaussian prototype, with the mean corresponding to the original statistic and the variance quantifying the augmentation scope. From the vicinal risk minimization perspective, novel feature statistics can be drawn from the Gaussian distribution to fulfill augmentation. The variance is explicitly derived by the data bias in each individual institute and the underlying feature statistics characterized by all participating institutes. The added-on VFDA consistently yielded marked improvements over six advanced FL methods on both 3D brain tumor and cardiac segmentation. △ Less

Submitted 23 October, 2023; originally announced October 2023.

Comments: 28th biennial international conference on Information Processing in Medical Imaging (IPMI 2023): Oral Paper

Journal ref: In: Frangi, A., de Bruijne, M., Wassermann, D., Navab, N. (eds) Information Processing in Medical Imaging. IPMI 2023. Lecture Notes in Computer Science, vol 13939. Springer, Cham

MSAT: Matrix stability analysis tool for shock-capturing schemes

Authors: Weijie Ren, Wenjia Xie, Ye Zhang, Hang Yu, Zhengyu Tian

Abstract: The simulation of supersonic or hypersonic flows often suffers from numerical shock instabilities if the flow field contains strong shocks, limiting the further application of shock-capturing schemes. In this paper, we develop the unified matrix stability analysis method for schemes with three-point stencils and present MSAT, an open-source tool to quantitatively analyze the shock instability prob… ▽ More The simulation of supersonic or hypersonic flows often suffers from numerical shock instabilities if the flow field contains strong shocks, limiting the further application of shock-capturing schemes. In this paper, we develop the unified matrix stability analysis method for schemes with three-point stencils and present MSAT, an open-source tool to quantitatively analyze the shock instability problem. Based on the finite-volume approach on the structured grid, MSAT can be employed to investigate the mechanism of the shock instability problem, evaluate the robustness of numerical schemes, and then help to develop robust schemes. Also, MSAT has the ability to analyze the practical simulation of supersonic or hypersonic flows, evaluate whether it will suffer from shock instabilities, and then assist in selecting appropriate numerical schemes accordingly. As a result, MSAT is a helpful tool that can investigate the shock instability problem and help to cure it. △ Less

Submitted 15 August, 2023; originally announced August 2023.

Comments: 18 pages, 6 figures

Numerical stability analysis of shock-capturing methods for strong shocks II: high-order finite-volume schemes

Authors: Weijie Ren, Wenjia Xie, Ye Zhang, Hang Yu, Zhengyu Tian

Abstract: The shock instability problem commonly arises in flow simulations involving strong shocks, particularly when employing high-order schemes, limiting their applications in hypersonic flow simulations. This study focuses on exploring the numerical characteristics and underlying mechanisms of shock instabilities in fifth-order finite-volume WENO schemes. To this end, for the first time, we have establ… ▽ More The shock instability problem commonly arises in flow simulations involving strong shocks, particularly when employing high-order schemes, limiting their applications in hypersonic flow simulations. This study focuses on exploring the numerical characteristics and underlying mechanisms of shock instabilities in fifth-order finite-volume WENO schemes. To this end, for the first time, we have established the matrix stability analysis method for the fifth-order scheme. By predicting the evolution of perturbation errors in the exponential growth stage, this method provides quantitative insights into the behavior of shock-capturing and helps elucidate the mechanisms that cause shock instabilities. Results reveal that even dissipative solvers also suffer from shock instabilities when the spatial accuracy is increased to fifth-order. Further investigation indicates that this is due to the excessively high spatial accuracy of the WENO scheme near the numerical shock structure. Moreover, the shock instability problem of fifth-order schemes is demonstrated to be a multidimensional coupling problem. To stably capture strong shocks, it is crucial to have sufficient dissipation on transverse faces and ensure at least two points within the numerical shock structure in the direction perpendicular to the shock. The source location of instability is also clarified by the matrix stability analysis method, revealing that the instability arises from the numerical shock structure. Additionally, stability analysis demonstrates that local characteristic decomposition helps mitigate shock instabilities in high-order schemes, although the instability still persists. These conclusions pave the way for a better understanding of the shock instability in fifth-order schemes and provide guidance for the development of more reliable high-order shock-capturing methods for compressible flows with high Mach numbers. △ Less

Submitted 7 August, 2023; originally announced August 2023.

Comments: 42 pages, 28 figures

Significant improvement of the lower critical field in Y doped Nb: potential replacement of basic material for the radio-frequency superconducting cavity

Authors: Wei Xie, Yu-Hao Liu, Xinwei Fan, Hai-Hu Wen

Abstract: The research of high energy and nuclear physics requires high power accelerators, and the superconducting radio-frequency (SRF) cavity is regarded as their engine. Up to now, the widely used practical and effective material for making the SRF cavity is pure Nb. The key parameter that governs the efficiency and the accelerating field (E_acc) of a SRF cavity is the lower critical field Hc1. Here, we… ▽ More The research of high energy and nuclear physics requires high power accelerators, and the superconducting radio-frequency (SRF) cavity is regarded as their engine. Up to now, the widely used practical and effective material for making the SRF cavity is pure Nb. The key parameter that governs the efficiency and the accelerating field (E_acc) of a SRF cavity is the lower critical field Hc1. Here, we report a significant improvement of Hc1 for a new type of alloy, Nb_{1-x}Y_x fabricated by the arc melting technique. Experimental investigations with multiple tools including x-ray diffraction, scanning electron microscopy, resistivity and magnetization are carried out, showing that the samples have good quality and a 30%-60% enhancement of Hc1. First principle calculations indicate that this improvement is induced by the delicate tuning of a Lifshitz transition of a Nb derivative band near the Fermi energy, which increases the Ginzburg-Landau parameter and Hc1. Our results may trigger a replacement of the basic material and thus a potential revolution for manufacturing the SRF cavity. △ Less

Submitted 12 June, 2023; originally announced June 2023.

Comments: 12 pages, 5 figures, 1 table

Journal ref: Supercond. Sci. Technol. 36 075012 (2023)

School Bullying Results in Poor Psychological Conditions: Evidence from a Survey of 95,545 Subjects

Authors: Na Zhao, Shenglong Yang, Qiangjian Zhang, Jian Wang, Wei Xie, Youguo Tan, Tao Zhou

Abstract: To investigate whether bullying and psychological conditions are correlated, this study analyzed a survey of primary and secondary school students from Zigong City, Sichuan Province. A total of 95,545 students completed a personal information questionnaire, the Multidimensional Peer-Victimization Scale (MPVS), and eight other scales pertaining to various psychological problems. The data showed tha… ▽ More To investigate whether bullying and psychological conditions are correlated, this study analyzed a survey of primary and secondary school students from Zigong City, Sichuan Province. A total of 95,545 students completed a personal information questionnaire, the Multidimensional Peer-Victimization Scale (MPVS), and eight other scales pertaining to various psychological problems. The data showed that 68,315 (71.5\%) participants experienced school bullying at varying degrees, indicating the prevalence of bullying among adolescents. The chi-square tests revealed a strong correlation between school bullying and psychological conditions. This correlation was further explored through multivariate logistic regression, showing that students who experienced mild bullying had a 3.10 times higher probability of emotional and behavioral problems, 4.06 times higher probability of experiencing prodromal symptoms of mental illness, 4.72 times higher probability of anxiety, 3.28 times higher probability of develo** post-traumatic stress disorder (PTSD) , 4.07 times higher probability of poor sleep quality, 3.13 times higher probability of internet addiction, 2.18 times higher probability of poor mental health, and 3.64 times higher probability of depression than students who did not experience bullying. The corresponding probabilities for students who experienced severe bullying were 11.35, 17.35, 18.52, 12.59, 11.67, 12.03, 4.64, and 5.34 times higher, respectively. In conclusion, school bullying and psychological conditions are significantly correlated among primary and secondary school students, and the more severe the bullying, the higher the probability to suffer from psychological problems. △ Less

Submitted 10 June, 2023; originally announced June 2023.

Comments: 13 pages, 1 figure, 7 tables

Numerical stability analysis of shock-capturing methods for strong shocks I: second-order MUSCL schemes

Authors: Weijie Ren, Wenjia Xie, Ye Zhang, Hang Yu, Zhengyu Tian

Abstract: Modern shock-capturing schemes often suffer from numerical shock anomalies if the flow field contains strong shocks, which may limit their further application in hypersonic flow computations. In the current study, we devote our efforts to exploring the primary numerical characteristics and the underlying mechanism of shock instability for second-order finite-volume schemes. To this end, we, for th… ▽ More Modern shock-capturing schemes often suffer from numerical shock anomalies if the flow field contains strong shocks, which may limit their further application in hypersonic flow computations. In the current study, we devote our efforts to exploring the primary numerical characteristics and the underlying mechanism of shock instability for second-order finite-volume schemes. To this end, we, for the first time, develop the matrix stability analysis method for the finite-volume MUSCL approach. Such a linearized analysis method allows to investigate the shock instability problem of the finite-volume shock-capturing schemes in a quantitative and efficient manner. Results of the stability analysis demonstrate that the shock stability of second-order scheme is strongly related to the Riemann solver, Mach number, limiter function, numerical shock structure, and computational grid. Unique stability characteristics associated with these factors for second-order methods are revealed quantitatively with the established method. Source location of instability is also clarified by the matrix stability analysis method. Results show that the shock instability originates from the numerical shock structure. Such conclusions pave the way to better understand the shock instability problem and may shed new light on develo** more reliable shock-capturing methods for compressible flows with high Mach number. △ Less

Submitted 5 May, 2023; originally announced May 2023.

Comments: 43 pages,23 figures

An interpretable machine-learned model for international oil trade network

Authors: Wen-Jie Xie, Na Wei, Wei-Xing Zhou

Abstract: Energy security and energy trade are the cornerstones of global economic and social development. The structural robustness of the international oil trade network (iOTN) plays an important role in the global economy. We integrate the machine learning optimization algorithm, game theory, and utility theory for learning an oil trade decision-making model which contains the benefit endowment and cost… ▽ More Energy security and energy trade are the cornerstones of global economic and social development. The structural robustness of the international oil trade network (iOTN) plays an important role in the global economy. We integrate the machine learning optimization algorithm, game theory, and utility theory for learning an oil trade decision-making model which contains the benefit endowment and cost endowment of economies in international oil trades. We have reconstructed the network degree, clustering coefficient, and closeness of the iOTN well to verify the effectiveness of the model. In the end, policy simulations based on game theory and agent-based model are carried out in a more realistic environment. We find that the export-oriented economies are more vulnerable to be affected than import-oriented economies after receiving external shocks. Moreover, the impact of the increase and decrease of trade friction costs on the international oil trade is asymmetrical and there are significant differences between international organizations. △ Less

Submitted 2 March, 2023; originally announced March 2023.

Comments: 14 pages, 5 figures

Journal ref: Resources Policy 82, 103513 (2023)

Economy importance and structural robustness of the international pesticide trade networks

Authors: Jian-An Li, Li Wang, Wen-Jie Xie, Wei-Xing Zhou

Abstract: Pesticides are a kind of agricultural input, whose use can greatly reduce yield loss, regulate plant growth, effectively liberate agricultural productivity, and improve food security. The availability of pesticides in economies all over the world is ensured by pesticide redistribution through international trade and economies play different roles in this process. In this work, we measure and rank… ▽ More Pesticides are a kind of agricultural input, whose use can greatly reduce yield loss, regulate plant growth, effectively liberate agricultural productivity, and improve food security. The availability of pesticides in economies all over the world is ensured by pesticide redistribution through international trade and economies play different roles in this process. In this work, we measure and rank the importance of economies using nine node metrics in an evolutionary way. It is found that the clustering coefficient is correlated negatively with the other eight node metrics, while the other eight node metrics are positively correlated with each other and can be grouped into three communities (betweenness; in-degree, PageRank, authority, and in-closeness; out-degree, hub, and out-closeness). We further investigate the structural robustness of the international pesticide trade networks proxied by the giant component size under three types of shocks to economies (node removal in descending order, randomly, and in ascending order). The results show that, except for the clustering coefficient, the international pesticide trade networks are relatively robust under shocks to economies in ascending orders and randomly, but fragile under shocks to economies in descending order. In contrast, removing nodes with the clustering coefficient in ascending and descending orders gives similar robustness curves. Moreover, the structural robustness related to the giant component size evolves over time and exhibits an inverse U-shaped pattern. △ Less

Submitted 2 March, 2023; originally announced March 2023.

Comments: 17 pages, 14 figures

Journal ref: {\textit{Journal of Management Science and Engineering}} {\bf{8}} (4), 512-528 (2023)

Impact of shocks to economies on the efficiency and robustness of the international pesticide trade networks

Authors: Jian-An Li, Li Wang, Wen-Jie Xie, Wei-Xing Zhou

Abstract: Pesticides are important agricultural inputs to increase agricultural productivity and improve food security. The availability of pesticides is partially achieved through international trade. However, economies involved in the international trade of pesticides are impacted by internal and external shocks from time to time, which influence the redistribution efficiency of pesticides all over the wo… ▽ More Pesticides are important agricultural inputs to increase agricultural productivity and improve food security. The availability of pesticides is partially achieved through international trade. However, economies involved in the international trade of pesticides are impacted by internal and external shocks from time to time, which influence the redistribution efficiency of pesticides all over the world. In this work, we adopt simulations to quantify the efficiency and robustness of the international pesticide trade networks under shocks to economies. Shocks are simulated based on nine node metrics, and three strategies are utilized based on descending, random, and ascending node removal. It is found that the efficiency and robustness of the international trade networks of pesticides increased for all the node metrics except the clustering coefficient. Moreover, the international pesticide trade networks are more fragile when import-oriented economies are affected by shocks. △ Less

Submitted 27 February, 2023; originally announced February 2023.

Comments: 12 pages, 5 figures

Journal ref: Eur. Phys. J. B 96, 25 (2023)

Dynamic surface tension of the pure liquid-vapor interface subjected to the cyclic loads

Authors: Zhiyong Yu, Songtai Lv, Xin Zhang, Hongtao Liang, Wei Xie, Yang Yang

Abstract: We demonstrate a methodology for computationally investigating the mechanical response of a pure molten lead surface system to the lateral mechanical cyclic loads and try to answer the question: how dose the dynamically driven liquid surface system follow the classical physics of the elastic-driven oscillation? The steady-state oscillation of the dynamic surface tension under cyclic load, includin… ▽ More We demonstrate a methodology for computationally investigating the mechanical response of a pure molten lead surface system to the lateral mechanical cyclic loads and try to answer the question: how dose the dynamically driven liquid surface system follow the classical physics of the elastic-driven oscillation? The steady-state oscillation of the dynamic surface tension under cyclic load, including the excitation of high frequency vibration mode at different driving frequencies and amplitudes, was compared with the classical theory of single-body driven damped oscillator. Under the highest studied frequency (50 GHz) and amplitude (5%) of the load, the increase of the (mean value) dynamic surface tension could reach ~5%. The peak and trough values of the instantaneous dynamic surface tension could reach (up to) 40% increase and (up to) 20% decrease compared to the equilibrium surface tension, respectively. The extracted generalized natural frequencies and the generalized dam** constants seem to be intimately related to the intrinsic timescales of the atomic temporal-spatial correlation functions of the liquids both in the bulk region and in the outermost surface layers. These insights uncovered could be helpful for quantitative manipulation of the liquid surface tension using ultrafast shockwaves or laser pulses. △ Less

Submitted 27 November, 2022; originally announced November 2022.

Soliton generation in AlGaAs microresonators at room temperature

Authors: Lue Wu, Weiqiang Xie, Chao Xiang, Lin Chang, Yan Yu, Hao-**g Chen, Yoshihisa Yamamoto, John E. Bowers, Kerry J. Vahala, Myoung-Gyun Suh

Abstract: Chip-integrated optical frequency combs are attractive optical sources in comb applications requiring high-repetition-rate, low power consumption, or compact size. Spontaneous soliton formation via Kerr parametric oscillation is a promising generation principle in these frequency combs, and has been demonstrated in several material platforms over the past decade. Of these materials, AlGaAs has one… ▽ More Chip-integrated optical frequency combs are attractive optical sources in comb applications requiring high-repetition-rate, low power consumption, or compact size. Spontaneous soliton formation via Kerr parametric oscillation is a promising generation principle in these frequency combs, and has been demonstrated in several material platforms over the past decade. Of these materials, AlGaAs has one of the largest Kerr nonlinearity coefficients allowing low pump threshold comb generation. However, bright soliton generation using this material has only been possible at cryogenic temperature because of the large thermo-optic effect at room temperature, which hinders stable access to the soliton regime. Here, we report self-stabilized single soliton generation in AlGaAs microresonators at room temperature by utilizing a rising soliton step in large free-spectral-range resonators. With sub-milliWatt optical pump power, 1 THz repetition-rate soliton generation is demonstrated. Perfect soliton crystal formation and soliton breather states are also observed. Besides the advantages of large optical nonlinearity, the devices are natural candidates for integration with III-V pump lasers. △ Less

Submitted 17 November, 2022; originally announced November 2022.

Comments: 7 pages, 3 figure

Design of the PMT underwater cascade implosion protection system for JUNO

Authors: Miao He, Zhonghua Qin, Shao**g Hou, ** **g, Hongbang Liu, Zunjian Ke, Diru Wu, Wan Xie, Mehang Xu, Fang Chen, Junguang Lu, Yuekun Heng, Jiawen Zhang, Xiaoyan Ma, Zhipeng Du

Abstract: Photomultiplier tubes (PMTs) are widely used underwater in large-scale neutrino experiments. As a hollow glass spherelike structure, implosion is unavoidable during long-term operation under large water pressure. There is a possibility of cascade implosion to neighbor PMTs due to shockwave. Jiangmen Underground Neutrino Observatory designed a protection structure for each 20-inch PMT, consisting o… ▽ More Photomultiplier tubes (PMTs) are widely used underwater in large-scale neutrino experiments. As a hollow glass spherelike structure, implosion is unavoidable during long-term operation under large water pressure. There is a possibility of cascade implosion to neighbor PMTs due to shockwave. Jiangmen Underground Neutrino Observatory designed a protection structure for each 20-inch PMT, consisting of a top cover, a bottom cover, and their connection. This paper introduces the requirement and design of the PMT protection system, including the material selection, investigation of manufacture technology, and prototy**. Optimization and validation by simulation and underwater experiments are also presented. △ Less

Submitted 17 September, 2022; originally announced September 2022.

Comments: 10 pages, 15 figures

High-resolution time-to-digital converters (TDCs) with a bidirectional encoder

Authors: Yu Wang, Wujun Xie, Haochang Chen, David Day-Uei Li

Abstract: A high-resolution time-to-digital converter (TDC) based on wave union (four-edge WU A), dual-sampling, and sub-TDL methods is proposed and implemented in a 16-nm Xilinx UltraScale+ field-programmable gate array (FPGA). We combine WU and dual-sampling techniques to achieve a high resolution. Besides, we use the sub-TDL method and the proposed bidirectional encoder to suppress bubbles and encode fou… ▽ More A high-resolution time-to-digital converter (TDC) based on wave union (four-edge WU A), dual-sampling, and sub-TDL methods is proposed and implemented in a 16-nm Xilinx UltraScale+ field-programmable gate array (FPGA). We combine WU and dual-sampling techniques to achieve a high resolution. Besides, we use the sub-TDL method and the proposed bidirectional encoder to suppress bubbles and encode four-transition pseudo thermometer codes efficiently. Experimental results indicate the proposed TDC achieves a 0.4 ps resolution with a 450MHz sampling clock and a 3.06 ps RMS precision in the best-case scenario. These characteristics make this design suitable for particle physics, biomedical imaging (such as positron emission tomography, PET), and general-purpose scientific instruments. △ Less

Submitted 29 August, 2022; originally announced September 2022.

Quantifying the temporal stability of international fertilizer trade networks

Authors: Mu-Yao Li, Li Wang, Wen-Jie Xie, Wei-Xing Zhou

Abstract: The importance of fertilizers to agricultural production is undeniable, and most economies rely on international trade for fertilizer use. The stability of fertilizer trade networks is fundamental to food security. We use three valid methods to measure the temporal stability of the overall network and different functional sub-networks of the three fertilizer nutrients N, P and K from 1990 to 2018.… ▽ More The importance of fertilizers to agricultural production is undeniable, and most economies rely on international trade for fertilizer use. The stability of fertilizer trade networks is fundamental to food security. We use three valid methods to measure the temporal stability of the overall network and different functional sub-networks of the three fertilizer nutrients N, P and K from 1990 to 2018. The international N, P and K trade systems all have a trend of increasing stability with the process of globalization. The large-weight sub-network has relatively high stability, but is more likely to be impacted by extreme events. The small-weight sub-network is less stable, but has a strong self-healing ability and is less affected by shocks. Overall, all the three fertilizer trade networks exhibit a stable core with restorable periphery. The overall network stability of the three fertilizers is close, but the K trade has a significantly higher stability in the core part, and the N trade is the most stable in the non-core part. △ Less

Submitted 21 August, 2022; originally announced August 2022.

Comments: 13 pages including 6 figures

Journal ref: Journal of Complex Networks 11 (5), cnad037 (2023)

Check on the features of potted 20-inch PMTs with 1F3 electronics prototype at Pan-Asia

Authors: Caimei Liu, Min Li, Zhimin Wang, Jun Hu, Nikolay Anfimov, Lei Fan, Alberto Garfagnini, Guanghua Gong, Shao**g Hou, Beatrice Jelmini, Xiaolu Ji, Xiaoshan Jiang, Denis Korablev, Tobias Lachenmaier, Si Ma, Xiaoyan Ma, Zhe Ning, Alexander G. Olshevskiy, Zhaoyuan Peng, Zhonghua Qin, Andrea Serafini, Katharina von Sturm, Tobias Sterr, Yunhua Sun, Alexander Felix Tietzsch , et al. (12 additional authors not shown)

Abstract: The Jiangmen underground neutrino observatory (JUNO) is a neutrino project with a 20-kton liquid scintillator detector located at 700-m underground. The large 20-inch PMTs are one of the crucial components of the JUNO experiment aiming to precision neutrino measurements with better than 3% energy resolution at 1 MeV. The excellent energy resolution and a large fiducial volume provide many exciting… ▽ More The Jiangmen underground neutrino observatory (JUNO) is a neutrino project with a 20-kton liquid scintillator detector located at 700-m underground. The large 20-inch PMTs are one of the crucial components of the JUNO experiment aiming to precision neutrino measurements with better than 3% energy resolution at 1 MeV. The excellent energy resolution and a large fiducial volume provide many exciting opportunities for addressing important topics in neutrino and astro-particle physics. With the container #D at JUNO Pan-Asia PMT testing and potting station, the features of waterproof potted 20-inch PMTs were measured with JUNO 1F3 electronics prototype in waveform and charge, which are valuable for better understanding on the performance of the waterproof potted PMTs and the JUNO 1F3 electronics. In this paper, basic features of JUNO 1F3 electronics prototype run at Pan-Asia will be introduced, followed by an analysis of the waterproof potted 20-inch PMTs and a comparison with the results from commercial electronics used by the container #A and #B. △ Less

Submitted 17 August, 2022; originally announced August 2022.

Evolving community structure in the international pesticide trade networks

Authors: Jian-An Li, Li Wang, Wen-Jie Xie, Wei-Xing Zhou

Abstract: The statistical properties including community structure of the international trade networks of all commodities as a whole have been studied extensively. However, the international trade networks of individual commodities often behave differently. Due to the importance of pesticides in agricultural production and food security, we investigate the evolving community structure in the international p… ▽ More The statistical properties including community structure of the international trade networks of all commodities as a whole have been studied extensively. However, the international trade networks of individual commodities often behave differently. Due to the importance of pesticides in agricultural production and food security, we investigate the evolving community structure in the international pesticide trade networks (iPTNs) of five categories from 2007 to 2018. We unveil the community structures in the undirected and directed iPTNs exhibits regional patterns. However, the regional patterns are very different for undirected and directed networks and for different categories of pesticide. Moreover, the community structure is stabler in the directed iPTNs than in the undirected iPTNs. We also extract the intrinsic community blocks for the directed international trade networks of each pesticide category. It is found that the largest intrinsic community block is the stablest that appears in every pesticide category and contains important economies (Belgium, Germany, Spain, France, United Kingdom, Italy, Netherlands, and Portugal) in Europe. Other important and stable intrinsic community blocks are Canada and the United States in North America, Argentina and Brazil in South America, and Australia and New Zealand in Oceania. These findings imply the importance of geographic distance and the complementarity of important adjacent economies in the international trade of pesticides. △ Less

Submitted 17 July, 2022; originally announced July 2022.

Comments: 31 pages including 22 figures

Journal ref: Heliyon 9(11), e21076 (2023)

Ultralow voltage, High-speed, and Energy-efficient Cryogenic Electro-Optic Modulator

Authors: Paolo Pintus, Anshuman Singh, Weiqiang Xie, Leonardo Ranzani, Martin V. Gustafsson, Minh A. Tran, Chao Xiang, Jonathan Peters, John E. Bowers, Moe Soltani

Abstract: Photonic integrated circuits (PICs) at cryogenic temperatures enable a wide range of applications in scalable classical and quantum systems for computing and sensing. A promising application of cryogenic PICs is to provide optical interconnects by up-converting signals from electrical to optical domain, allowing massive data-transfer from 4 K superconducting (SC) electronics to room temperature en… ▽ More Photonic integrated circuits (PICs) at cryogenic temperatures enable a wide range of applications in scalable classical and quantum systems for computing and sensing. A promising application of cryogenic PICs is to provide optical interconnects by up-converting signals from electrical to optical domain, allowing massive data-transfer from 4 K superconducting (SC) electronics to room temperature environment. Such a solution is central to overcome the major bottleneck in the scalability of cryogenic systems, which currently rely on bulky copper cables that suffer from limited bandwidth, large heat load, and do not show any scalability path. A key element for realizing a cryogenic-to-room temperature optical interconnect is a high-speed electro-optic (EO) modulator operating at 4 K with operation voltage at mV scale, compatible with SC electronics. Although several cryogenic EO modulators have been demonstrated, their driving voltages are significantly large compared to the mV scale voltage required for SC circuits. Here, we demonstrate a cryogenic modulator with ~10 mV peak-to-peak driving voltage and gigabits/sec data rate, with ultra-low electric and optical energy consumptions of ~10.4 atto-joules/bit and ~213 femto-joules/bit, respectively. We achieve this record performance by designing a compact optical ring resonator modulator in a heterogeneous InP-on-Silicon platform, where we optimize a multi-quantum well layer of InAIGaAs to achieve a strong EO effect at 4 K. Unlike other semiconductors such as silicon, our platform benefits from the high-carrier mobility and minimal free carrier freezing of III-V compounds at low temperatures, with moderate do** level and low loss (intrinsic resonator Q~272,000). These modulators can pave the path for complex cryogenic photonic functionalities and massive data transmission between cryogenic and room-temperature electronics. △ Less

Submitted 7 July, 2022; originally announced July 2022.

Comments: 18 page manuscript with 5 figures and 1 table, plus 17 page supplementary material

Multi-core fiber enabled fading noise suppression in φ-OFDR based quantitative distributed vibration sensing

Authors: Yuxiang Feng, Weilin Xie, Yinxia Meng, Jiang Yang, Qiang Yang, Yan Ren, Tianwai Bo, Zhongwei Tan, Wei Wei, Yi Dong

Abstract: Coherent fading has been regarded as a critical issue in phase-sensitive optical frequency domain reflectometry (φ-OFDR) based distributed fiber-optic sensing. Here, we report on an approach for fading noise suppression in φ-OFDR with multi-core fiber. By exploiting the independent nature of the randomness in the distribution of reflective index in each of the cores, the drastic phase fluctuations… ▽ More Coherent fading has been regarded as a critical issue in phase-sensitive optical frequency domain reflectometry (φ-OFDR) based distributed fiber-optic sensing. Here, we report on an approach for fading noise suppression in φ-OFDR with multi-core fiber. By exploiting the independent nature of the randomness in the distribution of reflective index in each of the cores, the drastic phase fluctuations due to the fading phenomina can be effectively alleviated by applying weighted vectorial averaging for the Rayleigh backscattering traces from each of the cores with distinct fading distributions. With the consistent linear response with respect to external excitation of interest for each of the cores, demonstration for the propsoed φ-OFDR with a commercial seven-core fiber has achieved highly sensitive quantitative distributed vibration sensing with about 2.2 nm length precision and 2 cm sensing resolution along the 500 m fiber, corresponding to a range resolution factor as high as about about 4E-5. Featuring long distance, high sensitivity, high resolution, and fading robustness, this approach has shown promising potentials in various sensing techniques for a wide range of practical scenarios. △ Less

Submitted 3 May, 2022; originally announced May 2022.

Comments: 4 pages

Fast fluorescence lifetime imaging analysis via extreme learning machine

Authors: Zhenya Zang, Dong Xiao, Quan Wang, Zinuo Li, Wujun Xie, Yu Chen, David Day Uei Li

Abstract: We present a fast and accurate analytical method for fluorescence lifetime imaging microscopy (FLIM) using the extreme learning machine (ELM). We used extensive metrics to evaluate ELM and existing algorithms. First, we compared these algorithms using synthetic datasets. Results indicate that ELM can obtain higher fidelity, even in low-photon conditions. Afterwards, we used ELM to retrieve lifetim… ▽ More We present a fast and accurate analytical method for fluorescence lifetime imaging microscopy (FLIM) using the extreme learning machine (ELM). We used extensive metrics to evaluate ELM and existing algorithms. First, we compared these algorithms using synthetic datasets. Results indicate that ELM can obtain higher fidelity, even in low-photon conditions. Afterwards, we used ELM to retrieve lifetime components from human prostate cancer cells loaded with gold nanosensors, showing that ELM also outperforms the iterative fitting and non-fitting algorithms. By comparing ELM with a computational efficient neural network, ELM achieves comparable accuracy with less training and inference time. As there is no back-propagation process for ELM during the training phase, the training speed is much higher than existing neural network approaches. The proposed strategy is promising for edge computing with online training. △ Less

Submitted 25 March, 2022; originally announced March 2022.

Comments: 14 pages, 9 figures

Charge Transfer Simulations using Hamiltonian Elements and Forces from Neural Networks

Authors: Philipp M. Dohmen, Mila Krämer, Patrick Reiser, Pascal Friederich, Marcus Elstner, Weiwei Xie

Abstract: The trajectory surface hop** method has been widely used in the simulation of charge transport in organic semiconductors. In the present study, we employ the machine learning (ML) based Hamiltonian to simulate the charge transport in anthracene and pentacene. The neural network (NN) based models are able to predict not just site energies and couplings but also the gradients of the site energy as… ▽ More The trajectory surface hop** method has been widely used in the simulation of charge transport in organic semiconductors. In the present study, we employ the machine learning (ML) based Hamiltonian to simulate the charge transport in anthracene and pentacene. The neural network (NN) based models are able to predict not just site energies and couplings but also the gradients of the site energy as well as off-diagonal gradients necessary for forces. We train the models on DFTB-quality data for both anthracene and pentacene. By using the obtained models in propagation simulations, we evaluate their performance in reproducing hole mobilities in these materials in terms of both quality and computational cost. The results show that the charge mobilities obtained using the NN-based Hamiltonian are in very good agreements with the charge mobilities computed using the DFTB-based Hamiltonian. △ Less

Submitted 22 March, 2022; v1 submitted 6 March, 2022; originally announced March 2022.

Sub-milliwatt, widely-tunable coherent microcomb generation with feedback-free operation

Authors: Haowen Shu, Lin Chang, Chenghao Lao, Bitao Shen, Weiqiang Xie, Xuguang Zhang, Ming **, Yuansheng Tao, Ruixuan Chen, Zihan Tao, Shaohua Yu, Qi-Fan Yang, Xingjun Wang, John E. Bowers

Abstract: Microcombs are revolutionizing optoelectronics by providing parallelized, mutually coherent wavelength channels for time-frequency metrology and information processing. To implement this essential function in integrated photonic systems, it is desirable to drive microcombs directly with an on-chip laser in a simple and flexible way. However, two major difficulties are preventing this goal: 1) gene… ▽ More Microcombs are revolutionizing optoelectronics by providing parallelized, mutually coherent wavelength channels for time-frequency metrology and information processing. To implement this essential function in integrated photonic systems, it is desirable to drive microcombs directly with an on-chip laser in a simple and flexible way. However, two major difficulties are preventing this goal: 1) generating mode-locked comb states usually requires a significant amount of pump power and 2) the requirement to align laser and resonator frequency significantly complicates operation and limits the tunability of the comb lines. Here, we address these problems by using microresonators on an AlGaAs on-insulator platform to generate dark-pulse microcombs. This highly nonlinear platform dramatically relaxes fabrication requirements and leads to a record-low pump power of less than 1 mW for coherent comb generation. Dark-pulse microcombs facilitated by thermally-controlled avoided mode-crossings are accessed by direct DFB laser pum**. Without any feedback or control circuitries, the comb shows good coherence and stability. This approach also leads to an unprecedented wide chir** range of all the comb lines. Our work provides a route to realize power-efficient, simple and reconfigurable microcombs that can be seamlessly integrated with a wide range of photonic systems. △ Less

Submitted 16 December, 2021; originally announced December 2021.

Probing material absorption and optical nonlinearity of integrated photonic materials

Authors: Maodong Gao, Qi-Fan Yang, Qing-Xin Ji, Heming Wang, Lue Wu, Boqiang Shen, Junqiu Liu, Guanhao Huang, Lin Chang, Weiqiang Xie, Su-Peng Yu, Scott B. Papp, John E. Bowers, Tobias J. Kippenberg, Kerry J. Vahala

Abstract: Optical microresonators with high quality ($Q$) factors are essential to a wide range of integrated photonic devices. Steady efforts have been directed towards increasing microresonator $Q$ factors across a variety of platforms. With success in reducing microfabrication process-related optical loss as a limitation of $Q$, the ultimate attainable $Q$, as determined solely by the constituent microre… ▽ More Optical microresonators with high quality ($Q$) factors are essential to a wide range of integrated photonic devices. Steady efforts have been directed towards increasing microresonator $Q$ factors across a variety of platforms. With success in reducing microfabrication process-related optical loss as a limitation of $Q$, the ultimate attainable $Q$, as determined solely by the constituent microresonator material absorption, has come into focus. Here, we report measurements of the material-limited $Q$ factors in several photonic material platforms. High-$Q$ microresonators are fabricated from thin films of SiO$_2$, Si$_3$N$_4$, Al$_{0.2}$Ga$_{0.8}$As and Ta$_2$O$_5$. By using cavity-enhanced photothermal spectroscopy, the material-limited $Q$ is determined. The method simultaneously measures the Kerr nonlinearity in each material and reveals how material nonlinearity and ultimate $Q$ vary in a complementary fashion across photonic materials. Besides guiding microresonator design and material development in four material platforms, the results help establish performance limits in future photonic integrated systems. △ Less

Submitted 29 October, 2021; originally announced November 2021.

Comments: Maodong Gao, Qi-Fan Yang and Qing-Xin Ji contributed equally to this work. 9 pages, 4 figures, 1 table

Journal ref: Nature Communications 13, 3323 (2022)

Bridging microcombs and silicon photonic engines for optoelectronics systems

Authors: Haowen Shu, Lin Chang, Yuansheng Tao, Bitao Shen, Weiqiang Xie, Ming **, Andrew Netherton, Zihan Tao, Xuguang Zhang, Ruixuan Chen, Bowen Bai, Jun Qin, Shaohua Yu, Xingjun Wang, John E. Bowers

Abstract: Microcombs have sparked a surge of applications over the last decade, ranging from optical communications to metrology. Despite their diverse deployment, most microcomb-based systems rely on a tremendous amount of bulk equipment to fulfill their desired functions, which is rather complicated, expensive and power-consuming. On the other hand, foundry-based silicon photonics (SiPh) has had remarkabl… ▽ More Microcombs have sparked a surge of applications over the last decade, ranging from optical communications to metrology. Despite their diverse deployment, most microcomb-based systems rely on a tremendous amount of bulk equipment to fulfill their desired functions, which is rather complicated, expensive and power-consuming. On the other hand, foundry-based silicon photonics (SiPh) has had remarkable success in providing versatile functionality in a scalable and low-cost manner, but its available chip-based light sources lack the capacity for parallelization, which limits the scope of SiPh applications. Here, we bridge these two technologies by using a power-efficient and operationally-simple AlGaAs on insulator microcomb source to drive CMOS SiPh engines. We present two important chip-scale photonic systems for optical data transmissions and microwave photonics respectively: The first microcomb-based integrated photonic data link is demonstrated, based on a pulse-amplitude 4-level modulation scheme with 2 Tbps aggregate rate, and a highly reconfigurable microwave photonic filter with unprecedented integration level is constructed, using a time stretch scheme. Such synergy of microcomb and SiPh integrated components is an essential step towards the next generation of fully integrated photonic systems. △ Less

Submitted 25 October, 2021; originally announced October 2021.

Comments: 10 pages, 4 figures

Journal ref: Nature 605, 457-463 (2022)

High-performance lasers for fully integrated silicon nitride photonics

Authors: Chao Xiang, Joel Guo, Warren **, Jonathan Peters, Weiqiang Xie, Lin Chang, Boqiang Shen, Heming Wang, Qi-Fan Yang, Lue Wu, David Kinghorn, Mario Paniccia, Kerry J. Vahala, Paul A. Morton, John E. Bowers

Abstract: Silicon nitride (SiN) waveguides with ultra-low optical loss enable integrated photonic applications including low noise, narrow linewidth lasers, chip-scale nonlinear photonics, and microwave photonics. Lasers are key components to SiN photonic integrated circuits (PICs), but are difficult to fully integrate with low-index SiN waveguides due to their large mismatch with the high-index III-V gain… ▽ More Silicon nitride (SiN) waveguides with ultra-low optical loss enable integrated photonic applications including low noise, narrow linewidth lasers, chip-scale nonlinear photonics, and microwave photonics. Lasers are key components to SiN photonic integrated circuits (PICs), but are difficult to fully integrate with low-index SiN waveguides due to their large mismatch with the high-index III-V gain materials. The recent demonstration of multilayer heterogeneous integration provides a practical solution and enabled the first-generation of lasers fully integrated with SiN waveguides. However a laser with high device yield and high output power at telecommunication wavelengths, where photonics applications are clustered, is still missing, hindered by large mode transition loss, nonoptimized cavity design, and a complicated fabrication process. Here, we report high-performance lasers on SiN with tens of milliwatts output through the SiN waveguide and sub-kHz fundamental linewidth, addressing all of the aforementioned issues. We also show Hertz-level linewidth lasers are achievable with the developed integration techniques. These lasers, together with high-$Q$ SiN resonators, mark a milestone towards a fully-integrated low-noise silicon nitride photonics platform. This laser should find potential applications in LIDAR, microwave photonics and coherent optical communications. △ Less

Submitted 16 April, 2021; originally announced April 2021.

Comments: 8 pages, 3 figures

A triple-mode mid-infrared modulator for all-surface radiative thermal management

Authors: Haoming Fang, Wanrong Xie, Xiuqiang Li, Kebin Fan, Yi-Ting Lai, Bowen Sun, Shulin Bai, Willie J. Padilla, Po-Chun Hsu

Abstract: Thermal management is ubiquitous in the modern world and indispensable for a sustainable future. Radiative heat management provides unique advantages because the heat transfer can be controlled by the surface. However, different surface emissivities require different tuning strategies. Here, we demonstrate a triple-mode mid-infrared modulator that can switch between passive heating and cooling sui… ▽ More Thermal management is ubiquitous in the modern world and indispensable for a sustainable future. Radiative heat management provides unique advantages because the heat transfer can be controlled by the surface. However, different surface emissivities require different tuning strategies. Here, we demonstrate a triple-mode mid-infrared modulator that can switch between passive heating and cooling suitable for all types of object surface emissivities. The device is composed of a surface-textured infrared-semi-transparent elastomer coated with a metallic back reflector, which is biaxially strained to sequentially achieve three fundamental modes: emission, reflection, and transmission. By analyzing and optimizing the coupling between optical and mechanical properties, we achieve a performance of emittance contrast = 0.58, transmittance contrast = 0.49, and reflectance contrast = 0.39. The device can provide a new design paradigm of radiation heat regulation to develop the next generation wearable devices, robotics, and camouflage technology. △ Less

Submitted 8 March, 2021; originally announced April 2021.

Transverse Rashba Effect and Unconventional Magnetocrystalline Anisotropy in Double-Gd-adsorbed Zigzag Graphene Nanoribbon

Authors: Weifeng Xie, Yu Song, Xu Zuo

Abstract: The transverse Rashba effect is proposed and investigated by the first-principle calculations based on density functional theory in a quasi-one-dimensional antiferromagnet with a strong perpendicular magnetocrystalline anisotropy, which is materialized by the Gd-adsorbed graphene nanoribbon with a centric symmetry. The Rashba effect in this system is associated with the local dipole field transver… ▽ More The transverse Rashba effect is proposed and investigated by the first-principle calculations based on density functional theory in a quasi-one-dimensional antiferromagnet with a strong perpendicular magnetocrystalline anisotropy, which is materialized by the Gd-adsorbed graphene nanoribbon with a centric symmetry. The Rashba effect in this system is associated with the local dipole field transverse to and in the plane of the nanoribbon. That dipole field is induced by the off-center adsorption of the Gd adatom above the hex-carbon ring near the nanoribbon edges. The transverse Rashba effect at the two Gd adatoms enhances each other in the antiferromagnetic (AFM) ground state and cancels each other in the ferromagnetic (FM) meta-stable state, because of the centrosymmetric atomic structure. The transverse Rashba parameter is 1.51 eV A. This system shows a strong perpendicular magnetocrystalline anisotropy (MCA), which is 1.4 meV per Gd atom in the AFM state or 2.2 meV per Gd atom in the FM state. The origin of the perpendicular MCA is analyzed in k-space by filtering out the contribution of the transverse Rashba effect from the band structures perturbed by the spin-orbit coupling interactions. The first-order perturbation of the orbit and spin angular momentum coupling is the major source of the MCA, which is associated with the one-dimensionality of the system. The transverse Rashba effect and the strong perpendicular magnetization hosted simultaneously by the proposed AFM Gd-adsorbed graphene nanoribbon lock the up- (or down-) spin quantization direction to the forward (or backward) movement. This finding offers a magnetic approach to a high coherency spin propagation in one-dimensionality, and open a new door to manipulating spin transportation in graphene-based spintronics. △ Less

Submitted 5 April, 2021; originally announced April 2021.

Deep learning-based photoacoustic imaging of vascular network through thick porous media

Authors: Ya Gao, Wenyi Xu, Yiming Chen, Weiya Xie, Qian Cheng

Abstract: Photoacoustic imaging (PAI) is a promising approach to realize in vivo transcranial cerebral vascular imaging. However, the strong attenuation and distortion of the photoacoustic wave caused by the thick porous skull greatly affect the imaging quality. In this study, we designed a convolutional neural network (CNN) with a U-Net architecture to extract the effective photoacoustic information hidden… ▽ More Photoacoustic imaging (PAI) is a promising approach to realize in vivo transcranial cerebral vascular imaging. However, the strong attenuation and distortion of the photoacoustic wave caused by the thick porous skull greatly affect the imaging quality. In this study, we designed a convolutional neural network (CNN) with a U-Net architecture to extract the effective photoacoustic information hidden in the speckle patterns; obtained vascular network images datasets under porous media through simulation and experiment, and trained the network weights respectively. The results show that the proposed neural network can learn the map** relationship between the speckle pattern and the target; extract the photoacoustic signals of some vessels submerged in noise to reconstruct high-quality images with a sharp outline of the vessel and clean background. Compared with the traditional photoacoustic reconstruction method, the deep learning-based reconstruction algorithms can achieve better performance, the mean absolute error (MAE), Structural SIMilarity (SSIM) and peak signal-to-noise ratio (PSNR) of reconstructed images have been greatly improved. In conclusion, the proposed neural network can effectively extract valid information from highly blurred speckle patterns for the rapid reconstruction of target images, which offers promising applications in transcranial photoacoustic imaging. △ Less

Submitted 14 August, 2022; v1 submitted 25 March, 2021; originally announced March 2021.

Comments: 14 pages, 14 figures, 4 tables

Journal ref: IEEE Transactions on Medical Imaging ( Volume: 41, Issue: 8, August 2022)

A unified construction of all-speed HLL-type schemes for hypersonic heating computations

Authors: Wenjia Xie, Zhengyu Tian, Ye Zhang, Hang Yu

Abstract: In this paper, a unified framework to develop all-speed HLL-type schemes for hypersonic heating computations is constructed. Such a unified construction method combines two effective improving techniques: a shock robustness improvement and a low-Mach number fix. It is implemented by properly modifying the approximate solutions of the local Riemann problem in the HLL framework, resulting in two all… ▽ More In this paper, a unified framework to develop all-speed HLL-type schemes for hypersonic heating computations is constructed. Such a unified construction method combines two effective improving techniques: a shock robustness improvement and a low-Mach number fix. It is implemented by properly modifying the approximate solutions of the local Riemann problem in the HLL framework, resulting in two all-speed HLL-type schemes, namely ASHLLC and ASHLLEM solvers. Results from both numerical analysis and experiments demonstrate that the newly proposed schemes not only preserve desirable properties of their original versions, but are also able to provide accurate and robust solutions for complex flows ranging from low-Mach number incompressible to hypersonic compressible regimes. Thus, both the ASHLLC and ASHLLEM schemes can be used as reliable methods for hypersonic heating computations. △ Less

Submitted 20 February, 2021; originally announced March 2021.

Laser soliton microcombs on silicon

Authors: Chao Xiang, Junqiu Liu, Joel Guo, Lin Chang, Rui Ning Wang, Wenle Weng, Jonathan Peters, Weiqiang Xie, Zeyu Zhang, Johann Riemensberger, Jennifer Selvidge, Tobias J. Kippenberg, John E. Bowers

Abstract: Silicon photonics enables wafer-scale integration of optical functionalities on chip. A silicon-based laser frequency combs could significantly expand the applications of silicon photonics, by providing integrated sources of mutually coherent laser lines for terabit-per-second transceivers, parallel coherent LiDAR, or photonics-assisted signal processing. Here, we report on heterogeneously integra… ▽ More Silicon photonics enables wafer-scale integration of optical functionalities on chip. A silicon-based laser frequency combs could significantly expand the applications of silicon photonics, by providing integrated sources of mutually coherent laser lines for terabit-per-second transceivers, parallel coherent LiDAR, or photonics-assisted signal processing. Here, we report on heterogeneously integrated laser soliton microcombs combining both InP/Si semiconductor lasers and ultralow-loss silicon nitride microresonators on monolithic silicon substrate. Thousands of devices are produced from a single wafer using standard CMOS techniques. Using on-chip electrical control of the microcomb-laser relative optical phase, these devices can output single-soliton microcombs with 100 GHz repetition rate. Our approach paves the way for large-volume, low-cost manufacturing of chip-based frequency combs for next-generation high-capacity transceivers, datacenters, space and mobile platforms. △ Less

Submitted 3 March, 2021; originally announced March 2021.

Incident-angle dependence of deformation characteristics of aluminum surface under low-energy xenon-ion impact

Authors: Cheng Zhang, Jiang Zhou, Weihua Xie, Jiacong Yin, Hongjiao Zhao

Abstract: Ion thruster is a revolution technology with potential applications in space mission but the thrusters operation lifetime is limited by the sputtering from thruster components. In this work, molecular dynamic simulations are performed to explore the dependence of deformation characteristics of an aluminum surface on incident angle and kinetic energy under low-energy xenon-ion impact. The fraction… ▽ More Ion thruster is a revolution technology with potential applications in space mission but the thrusters operation lifetime is limited by the sputtering from thruster components. In this work, molecular dynamic simulations are performed to explore the dependence of deformation characteristics of an aluminum surface on incident angle and kinetic energy under low-energy xenon-ion impact. The fraction of non-12-coordinated atoms is used to quantitatively characterize the microstructural evolution and defect density levels. It is found that defect density level has a linear relation with incident energy, and there exists a critical incident angle around 20 degrees, at which the aluminum surface has the maximum defect density level. In addition, a collision model is developed to theoretically reveal the physical mechanisms behind the dependence. Our findings may helpful in develo** long endurance electric propulsion devices for practical applications. △ Less

Submitted 20 February, 2021; originally announced February 2021.

Comments: 21 pages, 8 figures

Investigation of analog signal distortion introduced by a fiber phase sensitive amplifier

Authors: Debanuj Chatterjee, Yousra Bouasria, Weilin Xie, Tarek Labidi, Fabienne Goldfarb, Ihsan Fsaifes, Fabien Bretenaker

Abstract: We numerically simulate the distortion of an analog signal carried in a microwave photonics link containing a phase sensitive amplifier (PSA), focusing mainly on amplitude modulation format. The numerical model is validated by comparison with experimental measurements. By using the well known two-tone test, we compare the situations in which a standard intensity modulator is used with the one wher… ▽ More We numerically simulate the distortion of an analog signal carried in a microwave photonics link containing a phase sensitive amplifier (PSA), focusing mainly on amplitude modulation format. The numerical model is validated by comparison with experimental measurements. By using the well known two-tone test, we compare the situations in which a standard intensity modulator is used with the one where a perfectly linear modulator would be employed. We also investigate the role of gain saturation on the nonlinearity of the PSA. Finally, we establish the conditions, in which the signal nonlinearity introduced by the PSA itself can be extremely small. △ Less

Submitted 10 September, 2020; originally announced September 2020.

Journal ref: JOSA B 37, 2405 (2020)

Investigation of the noise figure in degenerate dual-pump phase sensitive amplifier using a multi-wave model

Authors: Yousra Bouasria, Debanuj Chatterjee, Weilin Xie, Ihsan Fsaifes, Fabienne Goldfarb, Yassine Hassouni, Fabien Bretenaker

Abstract: A semi-classical 7-wave model is developed to investigate the noise performances of a degenerate dual-pump phase sensitive amplifier. This approach takes into account the transfer to the signal, through multiple four-wave mixing processes, of the vacuum fluctuations injected in the high-order waves. This effect leads to a degradation of the noise figure of the amplifier with respect to the 0 dB va… ▽ More A semi-classical 7-wave model is developed to investigate the noise performances of a degenerate dual-pump phase sensitive amplifier. This approach takes into account the transfer to the signal, through multiple four-wave mixing processes, of the vacuum fluctuations injected in the high-order waves. This effect leads to a degradation of the noise figure of the amplifier with respect to the 0 dB value predicted by the usual 3-wave model. However, it is proved that a careful choice of the fiber dispersion allows to use the high-order waves to enhance the signal gain without degrading the noise figure above 1 dB. △ Less

Submitted 10 September, 2020; originally announced September 2020.

Journal ref: JOSA B 37, 2745 (2020)

Efficient resonance management in ultrahigh-Q one-dimensional photonic crystal nanocavities fabricated on 300 mm SOI CMOS platform

Authors: Weiqiang Xie, Peter Verheyen, Marianna Pantouvaki, Joris Van Campenhout, Dries Van Thourhout

Abstract: Photonic crystal (PhC) nanocavities have demonstrated unique capabilities in terms of light confinement and manipulation. As such, they are becoming attractive for the design of novel resonance-based photonic integrated circuits (PICs). Here two essential challenges arise however - how to realize ultrahigh-Q PhC cavities using standard fabrication processes compatible with large volume fabrication… ▽ More Photonic crystal (PhC) nanocavities have demonstrated unique capabilities in terms of light confinement and manipulation. As such, they are becoming attractive for the design of novel resonance-based photonic integrated circuits (PICs). Here two essential challenges arise however - how to realize ultrahigh-Q PhC cavities using standard fabrication processes compatible with large volume fabrication, and how to efficiently integrate them with other standard building blocks, available in exiting PIC platforms. In this work, we demonstrate ultrahigh-Q 1D PhC nanocavities fabricated on a 300 mm SOI wafer by optical lithography, with a record Q factor of up to 0.84 million. Moreover, we show efficient mode management in those oxide embedded cavities by coupling them with an access waveguide and realize two critical components: notch filters and narrow-band reflectors. In particular, they allow both single-wavelength and multi-wavelength operation, at the desired resonant wavelengths, while suppressing all other wavelengths over a broad wavelength range (>100 nm). Compared to traditional cavities, this offers a fantastic strategy for implementing resonances precisely in PIC designs with more freedom in terms of wavelength selectivity and the control of mode number. Given their compatibility with optical lithography and compact footprint, the realized 1D PhC nanocavities will be of profound significance for designing compact and novel resonance-based photonic components on large scale. △ Less

Submitted 2 September, 2020; originally announced September 2020.

Ultrahigh-Q AlGaAs-on-insulator microresonators for integrated nonlinear photonics

Authors: Weiqiang Xie, Lin Chang, Haowen Shu, Justin C. Norman, Jon D. Peters, Xingjun Wang, John E. Bowers

Abstract: Aluminum gallium arsenide (AlGaAs) and related III-V semiconductors have excellent optoelectronic properties. They also possess strong material nonlinearity as well as high refractive indices. In view of these properties, AlGaAs is a promising candidate for integrated photonics, including both linear and nonlinear devices, passive and active devices, and associated applications. For integrated pho… ▽ More Aluminum gallium arsenide (AlGaAs) and related III-V semiconductors have excellent optoelectronic properties. They also possess strong material nonlinearity as well as high refractive indices. In view of these properties, AlGaAs is a promising candidate for integrated photonics, including both linear and nonlinear devices, passive and active devices, and associated applications. For integrated photonics low propagation loss is essential, particularly in nonlinear applications. However, achieving low-loss and high-confinement AlGaAs photonic integrated circuits poses a challenge. Here we show an effective reduction of surface-roughness-induced scattering loss in fully etched high-confinement AlGaAs-on-insulator nanowaveguides, by using a heterogeneous wafer-bonding approach and optimizing fabrication techniques. We demonstrate ultrahigh-quality AlGaAs microring resonators and realize quality factors up to 3.52E6 and finesses as high as 1.4E4. We also show ultra-efficient frequency comb generations in those resonators and achieve record-low threshold powers on the order of ~20 uW and ~120 uW for the resonators with 1 THz and 90 GHz free-spectral ranges, respectively. Our result paves the way for the implementation of AlGaAs as a novel integrated material platform specifically for nonlinear photonics, and opens a new window for chip-based efficiency-demanding practical applications. △ Less

Submitted 29 April, 2020; originally announced April 2020.

Comments: 19 pages

Dissipative Kerr Solitons in a III-V Microresonator

Authors: Gregory Moille, Lin Chang, Weiqiang Xie, Ashutosh Rao, Xiyuan Lu, Marcelo Davanco, John E. Bowers, Kartik Srinivasan

Abstract: We demonstrate stable microresonator Kerr soliton frequency combs in a III-V platform (AlGaAs on SiO$_2$) through quenching of thermorefractive effects by cryogenic cooling to temperatures between 4~K and 20~K. This cooling reduces the resonator's thermorefractive coefficient, whose room-temperature value is an order of magnitude larger than that of other microcomb platforms like Si$_3$N$_4$, SiO… ▽ More We demonstrate stable microresonator Kerr soliton frequency combs in a III-V platform (AlGaAs on SiO$_2$) through quenching of thermorefractive effects by cryogenic cooling to temperatures between 4~K and 20~K. This cooling reduces the resonator's thermorefractive coefficient, whose room-temperature value is an order of magnitude larger than that of other microcomb platforms like Si$_3$N$_4$, SiO$_2$, and AlN, by more than two orders of magnitude, and makes soliton states adiabatically accessible. Realizing such phase-stable soliton operation is critical for applications that fully exploit the ultra-high effective nonlinearity and high optical quality factors exhibited by this platform. △ Less

Submitted 9 May, 2020; v1 submitted 13 March, 2020; originally announced March 2020.

Journal ref: Laser and Photonics Reviews, 2020

Integrated turnkey soliton microcombs operated at CMOS frequencies

Authors: Boqiang Shen, Lin Chang, Junqiu Liu, Heming Wang, Qi-Fan Yang, Chao Xiang, Rui Ning Wang, Jijun He, Tianyi Liu, Weiqiang Xie, Joel Guo, Dave Kinghorn, Lue Wu, Qing-Xin Ji, Tobias J. Kippenberg, Kerry Vahala, John E. Bowers

Abstract: While soliton microcombs offer the potential for integration of powerful frequency metrology and precision spectroscopy systems, their operation requires complex startup and feedback protocols that necessitate difficult-to-integrate optical and electrical components. Moreover, CMOS-rate microcombs, required in nearly all comb systems, have resisted integration because of their power requirements.… ▽ More While soliton microcombs offer the potential for integration of powerful frequency metrology and precision spectroscopy systems, their operation requires complex startup and feedback protocols that necessitate difficult-to-integrate optical and electrical components. Moreover, CMOS-rate microcombs, required in nearly all comb systems, have resisted integration because of their power requirements. Here, a regime for turnkey operation of soliton microcombs co-integrated with a pump laser is demonstrated and theoretically explained. Significantly, a new operating point is shown to appear from which solitons are generated through binary turn-on and turn-off of the pump laser, thereby eliminating all photonic/electronic control circuitry. These features are combined with high-Q $Si_3N_4$ resonators to fully integrate into a butterfly package microcombs with CMOS frequencies as low as 15 GHz, offering compelling advantages for high-volume production. △ Less

Submitted 6 November, 2019; originally announced November 2019.

Comments: Boqiang Shen, Lin Chang, Junqiu Liu, Heming Wang and Qi-Fan Yang contributed equally to this work

Transport evidence of triply degenerate nodal semimetal YRh6Ge4

Authors: Yanglin Zhu, Xin Gui, Yu Wang, David Graf, Weiwei Xie, Zhiqiang Mao

Abstract: We have investigated magnetotransport properties of YRh6Ge4, which was recently predicted to be a triply degenerate nodal semimetal. We find it exhibits remarkable signatures of a chiral anomaly, manifested by large negative longitudinal magnetoresistance, quadratic field dependence of magnetoconductance and planar Hall effect. Furthermore, we have also observed Shubnikov-de Haas (SdH) quantum osc… ▽ More We have investigated magnetotransport properties of YRh6Ge4, which was recently predicted to be a triply degenerate nodal semimetal. We find it exhibits remarkable signatures of a chiral anomaly, manifested by large negative longitudinal magnetoresistance, quadratic field dependence of magnetoconductance and planar Hall effect. Furthermore, we have also observed Shubnikov-de Haas (SdH) quantum oscillations in the magnetoresistivity measurements on this material. The analyses of the SdH data reveal two point-like Fermi surfaces and these pockets are found to host nearly massless fermions. The small size of these Fermi pockets is in a good agreement with the theoretical prediction that the triply degenerate point in YRh6Ge4 is much closer to the Fermi level than previously demonstrated triply degenerate nodal semimetals such as MoP and WC. These results suggest YRh6Ge4 may serve as a model system to probe exotic properties of three-component fermions and understand their underlying physics. △ Less

Submitted 16 October, 2019; originally announced October 2019.

Journal ref: Phys. Rev. B 101, 035133 (2020)

Ultra-efficient frequency comb generation in AlGaAs-on-insulator microresonators

Authors: Lin Chang, Weiqiang Xie, Haowen Shu, Qifan Yang, Boqiang Shen, Andreas Boes, Jon D. Peters, Warren **, Songtao Liu, Gregory Moille, Su-Peng Yu, Xingjun Wang, Kartik Srinivasan, Scott B. Papp, Kerry Vahala, John E. Bowers

Abstract: Recent advances in nonlinear optics have revolutionized the area of integrated photonics, providing on-chip solutions to a wide range of new applications. Currently, the state of the art integrated nonlinear photonic devices are mainly based on dielectric material platforms, such as Si3N4 and SiO2. While semiconductor materials hold much higher nonlinear coefficients and convenience in active inte… ▽ More Recent advances in nonlinear optics have revolutionized the area of integrated photonics, providing on-chip solutions to a wide range of new applications. Currently, the state of the art integrated nonlinear photonic devices are mainly based on dielectric material platforms, such as Si3N4 and SiO2. While semiconductor materials hold much higher nonlinear coefficients and convenience in active integration, they suffered in the past from high waveguide losses that prevented the realization of highly efficient nonlinear processes on-chip. Here we challenge this status quo and demonstrate an ultra-low loss AlGaAs-on-insulator (AlGaAsOI) platform with anomalous dispersion and quality (Q) factors beyond 1.5*10^6. Such a high quality factor, combined with the high nonlinear coefficient and the small mode volume, enabled us to demonstrate a record low Kerr frequency comb generation threshold of ~36 uW for a resonator with a 1 THz free spectral range (FSR), ~100 times lower compared to that in previous semiconductor platform. Combs with >250 nm broad span have been generated under a pump power lower than the threshold power of state of the art dielectric micro combs. A soliton-step transition has also been observed for the first time from an AlGaAs resonator. This work is an important step towards ultra-efficient semiconductor-based nonlinear photonics and will lead to fully integrated nonlinear photonic integrated circuits (PICs) in near future. △ Less

Submitted 21 September, 2019; originally announced September 2019.

On-chip polarization rotator for type I second harmonic generation

Authors: Eric J. Stanton, Lin Chang, Weiqiang Xie, Aditya Malik, Jon Peters, Jeff Chiles, Nima Nader, Gabriele Navickaite, Davide Sacchetto, Michael Zervas, Kartik Srinivasan, John E. Bowers, Scott B. Papp, Sae Woo Nam, Richard P. Mirin

Abstract: We demonstrate a polarization rotator integrated at the output of a GaAs waveguide producing type I second harmonic generation (SHG). Form-birefringent phase matching between the pump fundamental transverse electric (TE) mode near 2.0 $μ$m wavelength and the signal fundamental transverse magnetic (TM) mode efficiently generates light at 1.0 $μ$m wavelength. A SiN waveguide layer is integrated with… ▽ More We demonstrate a polarization rotator integrated at the output of a GaAs waveguide producing type I second harmonic generation (SHG). Form-birefringent phase matching between the pump fundamental transverse electric (TE) mode near 2.0 $μ$m wavelength and the signal fundamental transverse magnetic (TM) mode efficiently generates light at 1.0 $μ$m wavelength. A SiN waveguide layer is integrated with the SHG device to form a multi-functional photonic integrated circuit. The polarization rotator couples light between the two layers and rotates the polarization from TM to TE or from TE to TM. With a TE-polarized 2.0 $μ$m pump, type I SHG is demonstrated with the signal rotated to TE polarization. Passive transmission near 1.0 $μ$m wavelength shows ~80 % polarization rotation across a broad bandwidth of ~100 nm. By rotating the signal polarization to match that of the pump, this SHG device demonstrates a critical component of an integrated self-referenced octave-spanning frequency comb. This device is expected to provide crucial functionality as part of a fully integrated optical frequency synthesizer with resolution of less than one part in 10$^{14}$. △ Less

Submitted 31 July, 2019; originally announced July 2019.

Comments: 7 pages, 7 figures

Hierarchical Clustering Supported by Reciprocal Nearest Neighbors

Authors: Wen-Bo Xie, Yan-Li Lee, Cong Wang, Duan-Bing Chen, Tao Zhou

Abstract: Clustering is a fundamental analysis tool aiming at classifying data points into groups based on their similarity or distance. It has found successful applications in all natural and social sciences, including biology, physics, economics, chemistry, astronomy, psychology, and so on. Among numerous existent algorithms, hierarchical clustering algorithms are of a particular advantage as they can pro… ▽ More Clustering is a fundamental analysis tool aiming at classifying data points into groups based on their similarity or distance. It has found successful applications in all natural and social sciences, including biology, physics, economics, chemistry, astronomy, psychology, and so on. Among numerous existent algorithms, hierarchical clustering algorithms are of a particular advantage as they can provide results under different resolutions without any predetermined number of clusters and unfold the organization of resulted clusters. At the same time, they suffer a variety of drawbacks and thus are either time-consuming or inaccurate. We propose a novel hierarchical clustering approach on the basis of a simple hypothesis that two reciprocal nearest data points should be grouped in one cluster. Extensive tests on data sets across multiple domains show that our method is much faster and more accurate than the state-of-the-art benchmarks. We further extend our method to deal with the community detection problem in real networks, achieving remarkably better results in comparison with the well-known Girvan-Newman algorithm. △ Less

Submitted 9 July, 2019; originally announced July 2019.

Comments: 13 pages, 5 figures, 5 supplementary figures, 2 tables

Journal ref: Information Sciences 527 (2020) 279-292

All-optical switch and logic gates based on all-dielectric hybrid silicon-Ge2Sb2Te5 metamaterials

Authors: Zhaojian Zhang, Junbo Yang, Wei Bai, Yunxin Han, Xin He, Jie Huang, Dingbo Chen, Siyu Xu, Wanlin Xie

Abstract: We numerically propose an all-dielectric hybrid metamaterial (MM) to realize all-optical switch and logic gates in shortwave infrared (SWIR) band. Such MM consists of one silicon rod and one Ge2Sb2Te5 (GST) rod pair. Utilizing the transition from amorphous to crystalline state of GST, such MM can produce electromagnetically induced transparency (EIT) analogue with active control. Based on this, we… ▽ More We numerically propose an all-dielectric hybrid metamaterial (MM) to realize all-optical switch and logic gates in shortwave infrared (SWIR) band. Such MM consists of one silicon rod and one Ge2Sb2Te5 (GST) rod pair. Utilizing the transition from amorphous to crystalline state of GST, such MM can produce electromagnetically induced transparency (EIT) analogue with active control. Based on this, we realized all-optical switching at 1500 nm with a modulation depth 84%. Besides, three different logic gates, NOT, NOR and OR, can also be achieved in this device simultaneously. Thanks to the reversible and fast phase transition process of GST, this device possesses reconfigurable ability as well as fast response time, and has potential applications in future optical networks. △ Less

Submitted 9 July, 2019; originally announced July 2019.

Journal ref: Applied Optics, 58(27), 7392-7396 (2019)

Chipscale plasmonic modulators and switches based on metal-insulator-metal waveguides with Ge2Sb2Te5

Authors: Zhaojian Zhang, Junbo Yang, Wei Bai, Yunxin Han, Xin He, **g**g Zhang, Jie Huang, Dingbo Chen, Siyu Xu, Wanlin Xie

Abstract: We introduce phase-change material Ge2Sb2Te5 (GST) into metal-insulator-metal (MIM) waveguide systems to realize chipscale plasmonic modulators and switches in the telecommunication band. Benefitting from the high contrast of optical properties between amorphous and crystalline GST, the three proposed structures can act as reconfigurable and non-volatile modulators and switches with excellent modu… ▽ More We introduce phase-change material Ge2Sb2Te5 (GST) into metal-insulator-metal (MIM) waveguide systems to realize chipscale plasmonic modulators and switches in the telecommunication band. Benefitting from the high contrast of optical properties between amorphous and crystalline GST, the three proposed structures can act as reconfigurable and non-volatile modulators and switches with excellent modulation depth 14 dB and fast response time in nanosecond, meanwhile possessing small footprints, simple frameworks and easy fabrication. This work provides new solutions to design active devices in MIM waveguide systems, and can find potential applications in more compact all-optical circuits for information processing and storage. △ Less

Submitted 18 June, 2019; originally announced July 2019.

Journal ref: J. of Nanophotonics, 13(4), 046009 (2019)

Ultrafast Framing Imaging utilizing Multiple Optical-parametric-amplification with High Spatial Resolution and Imaging Rate

Authors: Xuanke Zeng, Shuiqin Zheng, Yi Cai, Qinggang Lin, Hongyu Wang, Xiaowei Lu, **gzhen Li, Weixin Xie, Shixiang Xu

Abstract: The discovery and understanding of many ultrafast dynamical processes are often invaluable. This paper is the first report to apply optical parametric amplification to implement single-shot ultrafast imaging with high space and time resolutions. Our setup breaks the constraints usually occurring among the time resolution, frame number, frame interval and spatial resolution in existing single-shot… ▽ More The discovery and understanding of many ultrafast dynamical processes are often invaluable. This paper is the first report to apply optical parametric amplification to implement single-shot ultrafast imaging with high space and time resolutions. Our setup breaks the constraints usually occurring among the time resolution, frame number, frame interval and spatial resolution in existing single-shot femtosecond imagers, so its performance can be greatly improved by using laser pulses with higher power and shorter time durations. Our setup has provided the highest experimental record of the frame rate and spatial resolution with the temporal resolution of 50 fs simultaneously. It is very powerful for accurate temporal and spatial observations of the ultrafast transient events with a lifetime down to the femtosecond scale, such as atomic or molecular dynamics in photonic material, plasma physics, living cells, and neural activity. △ Less

Submitted 30 June, 2019; originally announced July 2019.

Comments: arXiv admin note: substantial text overlap with arXiv:1807.00685