Showing 1–50 of 2,783 results for author: Xiao

A Versatile Side Entry Laser System for Scanning Transmission Electron Microscopy

Authors: Ondrej Dyck, Olugbenga Olunloyo, Kai Xiao, Benjamin Wolf, Thomas M. Moore, Andrew R. Lupini, Stephen Jesse

Abstract: We present the design and implementation of a side entry laser system designed for an ultra-high vacuum scanning transmission electron microscope. This system uses a versatile probe design enclosed in a vacuum envelope such that parts can be easily aligned, modified, or exchanged without disturbing the vacuum. The system uses a mirror mounted on the sample holder such that the sample can be illumi… ▽ More We present the design and implementation of a side entry laser system designed for an ultra-high vacuum scanning transmission electron microscope. This system uses a versatile probe design enclosed in a vacuum envelope such that parts can be easily aligned, modified, or exchanged without disturbing the vacuum. The system uses a mirror mounted on the sample holder such that the sample can be illuminated without being tilted. Notably the mirror can be removed and replaced with an ablation target and a higher power laser used to ablate material directly onto the sample. We argue that new capabilities hold the potential to transform the electron microscope from an analysis tool towards a more flexible synthesis system, where atomic scale fabrication and atom-by-atom experiments can be performed. △ Less

Submitted 12 July, 2024; originally announced July 2024.

Study of a Novel Capacitive Pressure Sensor Using Spiral Comb Electrodes

Authors: Wenjie Chen, Qi Yang, Qi Liu, Yiqun Zhang, Liang He, Yuanlin Xia, Zhuqing Wang, Yubo Huang, Jianfeng Chen, Cao Xia

Abstract: For traditional capacitive pressure sensors, high nonlinearity and poor sensitivity greatly limited their sensing applications. Hence, an innovative design of capacitors based on spiral comb electrodes is proposed for high-sensitivity pressure detection in this work. Compared to traditional capacitive pressure sensors with straight plate electrodes, the proposed sensor with the spiral electrodes i… ▽ More For traditional capacitive pressure sensors, high nonlinearity and poor sensitivity greatly limited their sensing applications. Hence, an innovative design of capacitors based on spiral comb electrodes is proposed for high-sensitivity pressure detection in this work. Compared to traditional capacitive pressure sensors with straight plate electrodes, the proposed sensor with the spiral electrodes increases the overlap areas of electrodes sufficiently, the pressure sensitivity can thus be greatly improved. Moreover, the capacitance variation of the proposed sensor is dominated by the change of the overlap area of the electrodes rather than the electrode's distance, the linearity can also thus be improved to higher than 0.99. Theoretical analysis and COMSOL-based finite element simulation have been implemented for principle verification and performance optimization. Simulation results show that the proposed design has a mechanical sensitivity of 1.5x10-4 m/Pa, capacitive sensitivity of 1.10 aF/Pa, and nonlinear error of 3.63%, respectively, at the pressure range from 0 to 30 kPa. An equivalent experiment has been further carried out for verification. Experimental results also show that both the sensitivity and linearity of capacitive pressure sensors with spiral electrodes are higher than those with straight electrodes. This work not only provides a new avenue for capacitor design, but also can be applied to high-sensitivity pressure detection. △ Less

Submitted 11 July, 2024; originally announced July 2024.

Comments: 20 pages, 14 figures

MSC Class: -

Skin Effect of Nonlinear Optical Responses in Antiferromagnets

Authors: Hang Zhou, Rui-Chun Xiao, Shu-Hui Zhang, Wei Gan, Hui Han, Hong-Miao Zhao, Wenjian Lu, Chang** Zhang, Yu** Sun, Hui Li, Ding-Fu Shao

Abstract: Nonlinear optics plays important roles in the research of fundamental physics and the applications of highperformance optoelectronic devices. The bulk nonlinear optical responses arise from the uniform light absorption in noncentrosymmetric crystals, and hence are usually considered to be the collective phenomena of all atoms. Here we show, in contrast to this common expectation, the nonlinear opt… ▽ More Nonlinear optics plays important roles in the research of fundamental physics and the applications of highperformance optoelectronic devices. The bulk nonlinear optical responses arise from the uniform light absorption in noncentrosymmetric crystals, and hence are usually considered to be the collective phenomena of all atoms. Here we show, in contrast to this common expectation, the nonlinear optical responses in antiferromagnets can be selectively accumulated near the surfaces, representing a skin effect. This is because the inversion symmetry, despite being broken globally, is barely violated locally deeply inside these antiferromagnets. Using A-type layered antiferromagnets as the representatives, we predict that the spatial-dependent nonlinear optical responses, such as bulk photovoltaic effect (BPVE) and second harmonic generation (SHG), are notable in the top- and bottom-most layers and decay rapidly when moving away from the surfaces. Such a phenomenon exists in a broad range of antiferromagnets composed of centrosymmetric sublattices, offering promising device applications using these antiferromagnets. Our work uncovers a previously overlooked property of nonlinear optical responses and opens new opportunities for high-performance antiferromagnetic optospintronics. △ Less

Submitted 11 July, 2024; originally announced July 2024.

3D E-textile for Exercise Physiology and Clinical Maternal Health Monitoring

Authors: Junyi Zhao, Chansoo Kim, Weilun Li, Zichao Wen, Zhili Xiao, Yong Wang, Shantanu Chakrabartty, Chuan Wang

Abstract: Electronic textiles (E-textiles) offer great wearing comfort and unobtrusiveness, thus holding potential for next-generation health monitoring wearables. However, the practical implementation is hampered by challenges associated with poor signal quality, substantial motion artifacts, durability for long-term usage, and non-ideal user experience. Here, we report a cost-effective E-textile system th… ▽ More Electronic textiles (E-textiles) offer great wearing comfort and unobtrusiveness, thus holding potential for next-generation health monitoring wearables. However, the practical implementation is hampered by challenges associated with poor signal quality, substantial motion artifacts, durability for long-term usage, and non-ideal user experience. Here, we report a cost-effective E-textile system that features 3D microfiber-based electrodes for greatly increasing the surface area. The soft and fluffy conductive microfibers disperse freely and securely adhere to the skin, achieving a low impedance at the electrode-skin interface even in the absence of gel. A superhydrophobic fluorinated self-assembled monolayer was deposited on the E-textile surface to render it waterproof while retaining the electrical conductivity. Equipped with a custom-designed motion-artifact canceling wireless data recording circuit, the E-textile system could be integrated into a variety of smart garments for exercise physiology and health monitoring applications. Real-time multimodal electrophysiological signal monitoring, including electrocardiogram (ECG) and electromyography (EMG), was successfully carried out during strenuous cycling and even underwater swimming activities. Furthermore, a multi-channel E-textile was developed and implemented in clinical patient studies for simultaneous real-time monitoring of maternal ECG and uterine EMG signals, incorporating spatial-temporal potential map** capabilities. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Comments: 16 pages, 6 figures

Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$

Authors: M. Ablikim, M. N. Achasov, P. Adlarson, O. Afedulidis, X. C. Ai, R. Aliberti, A. Amoroso, Q. An, Y. Bai, O. Bakina, I. Balossino, Y. Ban, H. -R. Bao, V. Batozskaya, K. Begzsuren, N. Berger, M. Berlowski, M. Bertani, D. Bettoni, F. Bianchi, E. Bianco, A. Bortone, I. Boyko, R. A. Briere, A. Brueggemann , et al. (645 additional authors not shown)

Abstract: The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be… ▽ More The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Narrow Linewidth Laser Based on Extended Topological Interface States in One-Dimensional Photonic Crystals

Authors: Xiao Sun, Zhibo Li, Yiming Sun, Yupei Wang, Jue Wang, Huihua Cheng, Cong Fu, John H. Marsh, Anthony E. Kelly, Lian** Hou

Abstract: Recent advances in topological one-dimensional photonic crystal concepts have enabled the development of robust light-emitting devices by incorporating a topological interface state (TIS) at the cavity center. In this study, we theoretically and experimentally demonstrate a one-dimensional TIS-extended photonic crystal (1D-TISE-PC) structure. By integrating a linearly dispersive zero-index one-dim… ▽ More Recent advances in topological one-dimensional photonic crystal concepts have enabled the development of robust light-emitting devices by incorporating a topological interface state (TIS) at the cavity center. In this study, we theoretically and experimentally demonstrate a one-dimensional TIS-extended photonic crystal (1D-TISE-PC) structure. By integrating a linearly dispersive zero-index one-dimensional photonic crystal structure with a four-phase shift sampled grating, photons propagate along the cavity without phase differences, enhancing the robustness to material variations and extending the TIS. Our findings indicate that extending the TIS promotes a more uniform photon distribution along the laser cavity and mitigates the spatial hole burning (SHB) effect. We fabricated and characterized a 1550 nm sidewall 1D-TISE-PC semiconductor laser, achieving stable single-mode operation across a wide current range from 60 to 420 mA, with a side-mode suppression ratio of 50 dB. The 1D-TISE-PC structure exhibited a linewidth narrowing effect to approximately 150 kHz Lorentzian linewidth. Utilizing reconstruction equivalent-chirp technology for the 4PS sampled grating enabled precise wavelength control in 1D-TISE-PC laser arrays, achieving a wavelength spacing of 0.796 nm +- 0.003 nm. We show that the TIS still exists in the TISE cavity and topological protection is preserved. Its mode extension characteristics mitigate the SHB so narrows the linewidth. We argue that the design simplicity and improvement of the fabrication tolerance make this architecture suitable for high-power and narrow-linewidth semiconductor lasers development. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Higher-order Fuzzy Membership in Motif Modularity Optimization

Authors: **g Xiao, Ya-Wei Wei, Xiao-Ke Xu

Abstract: Higher-order community detection (HCD) reveals both mesoscale structures and functional characteristics of real-life networks. Although many methods have been developed from diverse perspectives, to our knowledge, none can provide fine-grained higher-order fuzzy community information. This study presents a novel concept of higher-order fuzzy memberships that quantify the membership grades of motif… ▽ More Higher-order community detection (HCD) reveals both mesoscale structures and functional characteristics of real-life networks. Although many methods have been developed from diverse perspectives, to our knowledge, none can provide fine-grained higher-order fuzzy community information. This study presents a novel concept of higher-order fuzzy memberships that quantify the membership grades of motifs to crisp higher-order communities, thereby revealing the partial community affiliations. Furthermore, we employ higher-order fuzzy memberships to enhance HCD via a general framework called fuzzy memberships assisted motif-based evolutionary modularity (FMMEM). In FFMEM, on the one hand, a fuzzy membership-based neighbor community modification (FM-NCM) strategy is designed to correct misassigned bridge nodes, thereby improving partition quality. On the other hand, a fuzzy membership-based local community merging (FM-LCM) strategy is also proposed to combine excessively fragmented communities for enhancing local search ability. Experimental results indicate that the FMMEM framework outperforms state-of-the-art methods in both synthetic and real-world datasets, particularly in the networks with ambiguous and complex structures. △ Less

Submitted 9 July, 2024; originally announced July 2024.

Comments: 12 pages, 6 figures

Transformation of a cellular skyrmion to polyomino-like structures

Authors: **g Xia, Xichao Zhang, Yan Zhou, Xiaoxi Liu, Guo** Zhao, Masahito Mochizuki

Abstract: Topological spin structures with transformable shapes may have potential implications on data storage and computation. Here, we demonstrate that a square cellular skyrmion on an artificial grid pinning pattern can be manipulated by programmed current pulses. We find that parallel short pulses could result in the elongation of the skyrmion mainly in the current direction, while parallel long pulses… ▽ More Topological spin structures with transformable shapes may have potential implications on data storage and computation. Here, we demonstrate that a square cellular skyrmion on an artificial grid pinning pattern can be manipulated by programmed current pulses. We find that parallel short pulses could result in the elongation of the skyrmion mainly in the current direction, while parallel long pulses are able to induce the elongation in the direction perpendicular to the current due to the intrinsic skyrmion Hall effect. Consequently, a programmed sequence of parallel pulses could lead to the transformation of the skyrmion to I-, L-, and Z-shaped polyomino-like structures without affecting the topological charge. In addition, we find that orthogonal pulses could lead to the transformation to more complex polyomino-like structures, including the T-shaped and irregular ones. Particularly, when a small T-shaped structure is formed, the topological charge of the system is found to be non-integer due to incomplete compensation of local topological charge densities; however, the T-shaped structure is stable on the attractive pinning pattern. Our results offer an effective way to create polyomino-like spin structures toward functional applications. △ Less

Submitted 9 July, 2024; originally announced July 2024.

Comments: 7 pages, 5 figures

A Broadband Algorithm for Adiabatic Mode Evolution and An Application on Polarization Splitter-Rotator on LNOI Platform

Authors: Geng Chen, Chijun Li, Xuanhao Wang, Yuankang Huang, Siyu Lu, Yiqi Dai, Xiangyu Meng, Cheng Zeng, **song Xia

Abstract: Adiabatic mode evolution waveguides (AMEWs) are widely utilized in integrated photonics, including tapered waveguides, edge couplers, mode converters, splitters, etc. An analytical theory and a novel AMEW design algorithm are developed to create shortcuts to adiabaticity (STA). With the new algorithm, we demonstrate a broadband and highly efficient polarization splitter-rotator (PSR) on a lithium-… ▽ More Adiabatic mode evolution waveguides (AMEWs) are widely utilized in integrated photonics, including tapered waveguides, edge couplers, mode converters, splitters, etc. An analytical theory and a novel AMEW design algorithm are developed to create shortcuts to adiabaticity (STA). With the new algorithm, we demonstrate a broadband and highly efficient polarization splitter-rotator (PSR) on a lithium-niobate-on-insulator (LNOI) platform with an LN thickness of 500 nm. The fabricated PSR, with a total length of 2 mm, exhibits an insertion loss (IL) of 0.8 dB and a polarization extinction ratio (ER) of 12 dB over a wavelength range exceeding 76 nm. △ Less

Submitted 6 July, 2024; originally announced July 2024.

Comments: 9 pages, 6 figures, 2 tables

Optical wavefront sha** in deep tissue using photoacoustic feedback

Authors: Fei Xia, Ivo Leite, Robert Prevedel, Thomas Chaigne

Abstract: Over the past decade, optical wavefront sha** has been developed to focus light through highly opaque scattering layers, opening new possibilities for biomedical applications. To probe light intensity deep inside soft scattering media such as biological tissues, internal guide-stars are required. Here, we give an overview of the main principles and describe in depth the use of a photoacoustic fe… ▽ More Over the past decade, optical wavefront sha** has been developed to focus light through highly opaque scattering layers, opening new possibilities for biomedical applications. To probe light intensity deep inside soft scattering media such as biological tissues, internal guide-stars are required. Here, we give an overview of the main principles and describe in depth the use of a photoacoustic feedback signal for this purpose. We further present first principles calculations and simulations to estimate important experimental parameters, and detailed instructions on designing and conducting these experiments. Finally, we provide guidance towards selecting suitable equipment for building a typical experimental setup, paving the way for further innovative biomedical imaging and therapy applications. △ Less

Submitted 5 July, 2024; originally announced July 2024.

Comments: 25 pages, 9 figures, 3 tables

Compact ultra-broadband light coupling on chip via nonadiabatic pum**

Authors: Weiwei Liu, Chijun Li, Bing Wang, Tianyan Chai, Lingzhi Zheng, Zhuoxiong Liu, Haoru Zhang, Shuaifei Ren, Xiaohong Li, Cheng Zeng, **song Xia, Peixiang Lu

Abstract: Enlarging bandwidth capacity of the integrated photonic systems demands efficient and broadband light coupling among optical elements, which has been a vital issue in integrated photonics. Here, we have developed a compact ultra-broadband light coupling strategy based on nonadiabatic pum** in coupled optical waveguides, and experimentally demonstrated the designs in thin-film lithium niobate on… ▽ More Enlarging bandwidth capacity of the integrated photonic systems demands efficient and broadband light coupling among optical elements, which has been a vital issue in integrated photonics. Here, we have developed a compact ultra-broadband light coupling strategy based on nonadiabatic pum** in coupled optical waveguides, and experimentally demonstrated the designs in thin-film lithium niobate on insulator (LNOI) platform. We found that nonadiabatic transition would produce a decreased dispersion of the phases related to eigenstates in the waveguides. As a consequence, we realized high-efficiency directional transfer between edgestates for various wavelengths covering a 1-dB bandwidth of ~320 nm in experiment (>400 nm in simulation), with a coupling length (~50 μm) approximately 1/10 of that required in the adiabatic regime. Furthermore, we have constructed complex functional devices including beamsplitter and multiple-level cascaded networks for broadband light routing and splitting. Our work preserves significant advantages simultaneously in extending the operation bandwidth and minimizing the footprint, which demonstrates great potential for large-scale and compact photonic integration on chip. △ Less

Submitted 4 July, 2024; originally announced July 2024.

Controlling quasi-parametric amplifications: From multiple PT-symmetry phase transitions to non-Hermitian sensing

Authors: Xiaoxiong Wu, Kai Bai, Penghong Yu, Zhaohui Dong, Yanyan He, **gui Ma, Vladislav V. Yakovlev, Meng Xiao, Xianfeng Chen, Luqi Yuan

Abstract: Quasi-parametric amplification (QPA) is a nonlinear interaction in which the idler wave is depleted through some loss mechanism. QPA plays an important role in signal amplification in ultrafast photonics and quantum light generation. The QPA process has a number of features characterized by the non-Hermitian parity-time ($\mathcal{PT}$) symmetry. In this report, we explore new interaction regimes… ▽ More Quasi-parametric amplification (QPA) is a nonlinear interaction in which the idler wave is depleted through some loss mechanism. QPA plays an important role in signal amplification in ultrafast photonics and quantum light generation. The QPA process has a number of features characterized by the non-Hermitian parity-time ($\mathcal{PT}$) symmetry. In this report, we explore new interaction regimes and uncover multiple $\mathcal{PT}$-symmetry phase transitions in such QPA process where transitions are particularly sensitive to external parameters. In particular, we demonstrate the feasibility of detection of $10^{-11}$ inhomogeneities of the doped absorber, which is order of magnitude more sensitive than similar measurements performed in a linear absorption regime. In doing so, we reveal a family of $\mathcal{PT}$-symmetry phase transitions appearing in the QPA process and provide a novel nonlinear optical sensing mechanism for precise optical measurements. △ Less

Submitted 3 July, 2024; originally announced July 2024.

Comments: 17 pages, 6 figures

Picosecond lifetimes of hydrogen bonds in the halide perovskite CH$_3$NH$_3$PbBr$_3$

Authors: Alejandro Garrote-Márquez, Lucas Lodeiro, Norge Cruz Hernández, Xia Liang, Aron Walsh, Eduardo Menéndez-Proupin

Abstract: The structures and properties of organic-inorganic perovskites are influenced by the hydrogen bonding between the organic cations and the inorganic octahedral networks. This study explores the dynamics of hydrogen bonds in CH$_3$NH$_3$PbBr$_3$ across a temperature range from 70 K to 350 K, using molecular dynamics simulations with machine-learning force fields. The results indicate that the lifeti… ▽ More The structures and properties of organic-inorganic perovskites are influenced by the hydrogen bonding between the organic cations and the inorganic octahedral networks. This study explores the dynamics of hydrogen bonds in CH$_3$NH$_3$PbBr$_3$ across a temperature range from 70 K to 350 K, using molecular dynamics simulations with machine-learning force fields. The results indicate that the lifetime of hydrogen bonds decreases with increasing temperature from 7.6 ps (70 K) to 0.16 ps (350 K), exhibiting Arrhenius-type behaviour. The geometric conditions for hydrogen bonding, which include bond lengths and angles, maintain consistency across the full temperature range. The relevance of hydrogen bonds for the vibrational states of the material is also evidenced through a detailed analysis of the vibrational power spectra, demonstrating their significant effect on the physical properties for this class of perovskites. △ Less

Submitted 3 July, 2024; originally announced July 2024.

Comments: 26 pages, 14 figures

A versatile quantum microwave photonic signal processing platform based on coincidence window selection technique

Authors: Xinghua Li, Yifan Guo, Xiao Xiang, Runai Quan, Mingtao Cao, Ruifang Dong, Tao Liu, Ming Li, Shougang Zhang

Abstract: Quantum microwave photonics (QMWP) is an innovative approach that combines energy-time entangled biphoton sources as the optical carrier with time-correlated single-photon detection for high-speed RF signal recovery. This groundbreaking method offers unique advantages such as nonlocal RF signal encoding and robust resistance to dispersion-induced frequency fading. This paper explores the versatili… ▽ More Quantum microwave photonics (QMWP) is an innovative approach that combines energy-time entangled biphoton sources as the optical carrier with time-correlated single-photon detection for high-speed RF signal recovery. This groundbreaking method offers unique advantages such as nonlocal RF signal encoding and robust resistance to dispersion-induced frequency fading. This paper explores the versatility of processing the quantum microwave photonic signal by utilizing coincidence window selection on the biphoton coincidence distribution. The demonstration includes finely-tunable RF phase shifting, flexible multi-tap transversal filtering (with up to 15 taps), and photonically implemented RF mixing, leveraging the nonlocal RF map** characteristic of QMWP. These accomplishments significantly enhance the capability of microwave photonic systems in processing ultra-weak signals, opening up new possibilities for various applications. △ Less

Submitted 2 July, 2024; originally announced July 2024.

Quantum microwave photonic mixer with a large spurious-free dynamic range

Authors: Xinghua Li, Yifan Guo, Xiao Xiang, Runai Quan, Mingtao Cao, Ruifang Dong, Tao Liu, Ming Li, Shougang Zhang

Abstract: As one of the most fundamental functionalities of microwave photonics, microwave frequency mixing plays an essential role in modern radars and wireless communication systems. However, the commonly utilized intensity modulation in the systems often leads to inadequate spurious-free dynamic range (SFDR) for many sought-after applications. Quantum microwave photonics technique offers a promising solu… ▽ More As one of the most fundamental functionalities of microwave photonics, microwave frequency mixing plays an essential role in modern radars and wireless communication systems. However, the commonly utilized intensity modulation in the systems often leads to inadequate spurious-free dynamic range (SFDR) for many sought-after applications. Quantum microwave photonics technique offers a promising solution for improving SFDR in terms of higher-order harmonic distortion. In this paper, we demonstrate two types of quantum microwave photonic mixers based on the configuration of the intensity modulators: cascade-type and parallel-type. Leveraging the nonlocal RF signal encoding capability, both types of quantum microwave photonic mixers not only exhibit the advantage of dual-channel output but also present significant improvement in SFDR. Specifically, the parallel-type quantum microwave photonic mixer achieves a remarkable SFDR value of 113.6 dB.Hz1/2, which is 30 dB better than that of the cascade-type quantum microwave photonic mixer. When compared to the classical microwave photonic mixer, this enhancement reaches a notable 53.6 dB at the expense of 8 dB conversion loss. These results highlight the superiority of quantum microwave photonic mixers in the fields of microwave and millimeter-wave systems. Further applying multi-photon frequency entangled sources as optical carriers, the dual-channel microwave frequency conversion capability endowed by the quantum microwave photonic mixer can be extended to enhance the performance of multiple-paths microwave mixing which is essential for radar net systems. △ Less

Submitted 2 July, 2024; originally announced July 2024.

A MgNO Method for Multiphase Flow in Porous Media

Authors: Xinliang Liu, Xia Yang, Chen-Song Zhang, Lian Zhang, Li Zhao

Abstract: This research investigates the application of Multigrid Neural Operator (MgNO), a neural operator architecture inspired by multigrid methods, in the simulation for multiphase flow within porous media. The architecture is adjusted to manage a variety of crucial factors, such as permeability and porosity heterogeneity. The study extendes MgNO to time-dependent porous media flow problems and validate… ▽ More This research investigates the application of Multigrid Neural Operator (MgNO), a neural operator architecture inspired by multigrid methods, in the simulation for multiphase flow within porous media. The architecture is adjusted to manage a variety of crucial factors, such as permeability and porosity heterogeneity. The study extendes MgNO to time-dependent porous media flow problems and validate its accuracy in predicting essential aspects of multiphase flows. Furthermore, the research provides a detailed comparison between MgNO and Fourier Neural Opeartor (FNO), which is one of the most popular neural operator methods, on their performance regarding prediction error accumulation over time. This aspect provides valuable insights into the models' long-term predictive stability and reliability. The study demonstrates MgNO's capability to effectively simulate multiphase flow problems, offering considerable time savings compared to traditional simulation methods, marking an advancement in integrating data-driven methodologies in geoscience applications. △ Less

Submitted 16 June, 2024; originally announced July 2024.

Hypermultiplexed off-chip hologram by on-chip integrated metasurface

Authors: Xian** Liu, Zhanying Ma, Dasen Zhang, Qiwen Bao, Zhenzhen Liu, Jun-Jun Xiao

Abstract: The waveguide-integrated metasurface introduces a novel photonic chip capable of converting guided modes into free-space light. This enables functions such as off-chip beam focusing, steering, and imaging. The challenge lies in achieving hypermultiplexing across diverse parameters, including guided-wave mode type, direction, polarization, and notably, multiple wavelengths. Here, we introduce a com… ▽ More The waveguide-integrated metasurface introduces a novel photonic chip capable of converting guided modes into free-space light. This enables functions such as off-chip beam focusing, steering, and imaging. The challenge lies in achieving hypermultiplexing across diverse parameters, including guided-wave mode type, direction, polarization, and notably, multiple wavelengths. Here, we introduce a comprehensive end-to-end inverse design framework, rooted in a physical model, for the multifunctional design of on-chip metasurfaces. This framework allows for metasurface optimization through a target-field-driven iteration process. We demonstrate a hypermultiplexed on-chip metasurface capable of generating red-green-blue holograms at multiple target planes, with both independent and cooperative control over guided-wave direction. Significantly, the proposed method streamlines the design process utilizing only the positions of meta-atoms as the design variable. We demonstrate 9 independent holographic channels through a combination of wavelength and distance multiplexing. Moreover, by incorporating the excitation direction into the design, the metasurface produces a total of 36 distinct holograms. The robustness of these results against fabrication discrepancies is validated through 3D full-wave electromagnetic simulations, aligning well with advanced manufacturing techniques. Our research presents a universal design framework for the development of multifunctional on-chip metasurfaces, opening up new avenues for a wide range of applications. △ Less

Submitted 2 July, 2024; originally announced July 2024.

The differences in the origination and properties of the near-Earth solar wind between solar cycles 23 and 24

Authors: Xinzheng Shi, Hui Fu, Zhenghua Huang, Limei Yan, Chi Ma, Chenxi Huangfu, Hongqiang Song, Lidong Xia

Abstract: The dependence of the sources and properties of the near-Earth solar wind on solar cycle activity is an important issue in solar and space physics. We use the improved two-step map** procedure that takes into account the initial acceleration processes to trace the near-Earth solar winds back to their source regions from 1999 to 2020, covering solar cycles (SCs) 23 and 24. Then the solar wind is… ▽ More The dependence of the sources and properties of the near-Earth solar wind on solar cycle activity is an important issue in solar and space physics. We use the improved two-step map** procedure that takes into account the initial acceleration processes to trace the near-Earth solar winds back to their source regions from 1999 to 2020, covering solar cycles (SCs) 23 and 24. Then the solar wind is categorized into coronal hole (CH), active region (AR), and quiet Sun (QS) solar wind based on the source region types. We find that the proportions of CH and AR (QS) wind during SC 23 are higher (lower) than those during SC 24. During solar maximum and declining phases, the magnetic field strength, speed, helium abundance (AHe), and charge states of all three types of solar wind during SC 23 are generally higher than those during SC 24. During solar minimum, these parameters of solar wind are generally lower during SC 23 than those during SC 24. There is a significant decrease in the charge states of all three types of solar wind during the solar minimum of SC 23. The present statistical results demonstrate that the sources and properties of the solar wind are both influenced by solar cycle amplitude. The temperatures of AR, QS, and CH regions exhibit significant difference at low altitudes, whereas they are almost uniform at high altitudes. △ Less

Submitted 30 June, 2024; originally announced July 2024.

Comments: 21 pages, 11 figures

Core-level signature of long-range charge-density-wave order and short-range excitonic correlations probed by attosecond broadband spectroscopy

Authors: Alfred Zong, Sheng-Chih Lin, Shunsuke A. Sato, Emma Berger, Bailey R. Nebgen, Marcus Hui, B. Q. Lv, Yun Cheng, Wei Xia, Yanfeng Guo, Dao Xiang, Michael W. Zuerch

Abstract: Strongly-correlated quantum materials are characterized by a multitude of time- and energy-scales that govern quasiparticle interactions and excitations, and a precise understanding of their ground state properties necessitate an access to experimental observables that are both sensitive to the establishment of long-range order and short-range correlations. Advances in attosecond core-level spectr… ▽ More Strongly-correlated quantum materials are characterized by a multitude of time- and energy-scales that govern quasiparticle interactions and excitations, and a precise understanding of their ground state properties necessitate an access to experimental observables that are both sensitive to the establishment of long-range order and short-range correlations. Advances in attosecond core-level spectroscopes have successfully unlocked the fastest process involving carrier dynamics in these systems, yet they are not traditionally regarded as an appropriate probe for long-range order due to their local charge sensitivity or for the low-energy physics that governs the ground-state properties of strongly-correlated materials. Here, employing a unique cryogenic attosecond broadband extreme-ultraviolet beamline, we identified clear core-level signatures of long-range charge-density-wave (CDW) formation in an excitonic insulator candidate, titanium diselenide in its 1T phase, although equilibrium measurements of the same core levels in either photoemission or absorption spectroscopy showed no observable signals about the phase transition. Leveraging intrinsic sensitivity to short-range charge excitations in core-level absorption spectra, we observed direct time-domain evidence for incoherent excitonic correlations in the normal-state of the material, whose presence has been subjected to a long-standing debate in equilibrium experiments due to the existence of CDW phonon fluctuations in a similar part of the phase space. Our results demonstrated the importance of simultaneous accesses to long- and short-range ordering with underlying dynamical processes spanning decades of time- and energy-scales, making attosecond broadband spectroscopy an indispensable tool for both understanding the equilibrium phase diagram and for discovering novel, nonequilibrium states in correlated materials. △ Less

Submitted 30 June, 2024; originally announced July 2024.

Direct Observation of Morphological and Chemical Changes During the Oxidation of Model Inorganic Ligand-Capped Particles

Authors: Maximilian Jaugstetter, Xiao Qi, Emory Chan, Miquel Salmeron, Kevin R. Wilson, Slavomír Nemšák, Hendrik Bluhm

Abstract: Functionalization and volatilization are competing reactions during the oxidation of carbonaceous materials and are important processes in many different areas of science and technology. Here we present a combined ambient pressure X-ray photoelectron spectroscopy (APXPS) and grazing incidence X-ray scattering (GIXS) investigation of the oxidation of oleic acid ligands surrounding NaYF4 nanoparticl… ▽ More Functionalization and volatilization are competing reactions during the oxidation of carbonaceous materials and are important processes in many different areas of science and technology. Here we present a combined ambient pressure X-ray photoelectron spectroscopy (APXPS) and grazing incidence X-ray scattering (GIXS) investigation of the oxidation of oleic acid ligands surrounding NaYF4 nanoparticles (NPs) deposited onto SiOx/Si substrates. While APXPS monitors the evolution of the oxidation products, GIXS provides insight into the morphology of the ligands and particles before and after the oxidation. Our investigation shows that the oxidation of the oleic acid ligands proceeds at O2 partial pressures of below 1 mbar in the presence of X-rays, with the oxidation eventually reaching a steady state in which mainly CHx and -COOH functional groups are observed. The scattering data reveal that the oxidation and volatilization reaction proceeds preferentially on the side of the particle facing the gas phase, leading to the formation of a chemically and morphologically asymmetric ligand layer. This comprehensive picture of the oxidation process could only be obtained by combining the X-ray scattering and APXPS data. The investigation presented here lays the foundation for further studies of the stability of NP layers in the presence of reactive trace gasses and ionizing radiation, and for other nanoscale systems where chemical and morphological changes happen simultaneously and cannot be understood in isolation. △ Less

Submitted 30 June, 2024; originally announced July 2024.

Comments: 18 pages, 8 figures

Transfer printing micro-assembly of silicon photonic crystal cavity arrays: beating the fabrication tolerance limit

Authors: Sean P. Bommer, Christopher Panuski, Benoit Guilhabert, Zhongyi Xia, Jack A. Smith, Martin D. Dawson, Dirk Englund, Michael J. Strain

Abstract: Photonic crystal cavities (PhCCs) can confine optical fields in ultra-small volumes, enabling efficient light-matter interactions for quantum and non-linear optics, sensing and all-optical signal processing. The inherent nanometric tolerances of micro-fabrication platforms can induce cavity resonant wavelength shifts two-orders of magnitude larger than cavity linewidths, prohibiting fabrication of… ▽ More Photonic crystal cavities (PhCCs) can confine optical fields in ultra-small volumes, enabling efficient light-matter interactions for quantum and non-linear optics, sensing and all-optical signal processing. The inherent nanometric tolerances of micro-fabrication platforms can induce cavity resonant wavelength shifts two-orders of magnitude larger than cavity linewidths, prohibiting fabrication of arrays of nominally identical devices. We address this device variability by fabricating PhCCs as releasable pixels that can be transferred from their native substrate to a receiver where ordered micro-assembly can overcome the inherent fabrication variance. We demonstrate the measurement, binning and transfer of 119 PhCCs in a single session, producing spatially ordered arrays of PhCCs, sorted by resonant wavelength. Furthermore, the rapid in-situ measurement of the devices enables measurements of the PhCCs dynamic response to the print process for the first time, showing plastic and elastic effects in the seconds to hours range. △ Less

Submitted 28 June, 2024; originally announced June 2024.

The neutron array of the compact spectrometer for heavy ion experiments in Fermi energy region

Authors: Dawei Si, Sheng Xiao, Yuhao Qin, Yijie Wang, Junhuai Xu, Baiting Tian, Boyuan Zhang, Dong Guo, Qin Zhi, Xiaobao Wei, Yibo Hao, Zengxiang Wang, Tianren Zhuo, Yuansheng Yang, Xianglun Wei, Herun Yang, Peng Ma, Limin Duan, Fangfang Duan, Junbing Ma, Shiwei Xu, Zhen Bai, Guo Yang, Yanyun Yang, Zhigang Xiao

Abstract: The emission of neutrons from heavy ion reactions is an important observable for studying the asymmetric nuclear equation of state and the reaction dynamics. A 20-unit neutron array has been developed and mounted on the compact spectrometer for heavy ion experiments (CSHINE) to measure the neutron spectra, neutron-neutron and neutron-proton correlation functions. Each unit consists of a… ▽ More The emission of neutrons from heavy ion reactions is an important observable for studying the asymmetric nuclear equation of state and the reaction dynamics. A 20-unit neutron array has been developed and mounted on the compact spectrometer for heavy ion experiments (CSHINE) to measure the neutron spectra, neutron-neutron and neutron-proton correlation functions. Each unit consists of a $\rm 15\times 15\times 15~cm^3$ plastic scintillator coupled to a $ φ=52 ~\rm mm$ photomultiplier. The Geant4 simulation with optical process is performed to investigate the time resolution and the neutron detection efficiency. The inherent time resolution of 212 ps is obtained by cosmic ray coincidence test. The n-$γ$ discrimination and time-of-flight performance are given by $\rm ^{252}Cf$ radioactive source test and beam test. The neutron energy spectra have been obtained in the angle range $30^\circ \le θ_{\rm lab} \le 51^\circ$ in the beam experiment of $^{124}$Sn+$^{124}$Sn at 25 MeV/u with CSHINE. △ Less

Submitted 20 June, 2024; originally announced June 2024.

Comments: 8 pages, 11 figures

Correlation of the L-mode density limit with edge collisionality

Authors: Andrew Maris, Cristina Rea, Alessandro Pau, Wenhui Hu, Bingjia Xiao, Robert Granetz, Earl Marmar, the EUROfusion Tokamak Exploitation team, the Alcator C-Mod team, the ASDEX Upgrade team, the DIII-D team, the EAST team, the TCV team

Abstract: The "density limit" is one of the fundamental bounds on tokamak operating space, and is commonly estimated via the empirical Greenwald scaling. This limit has garnered renewed interest in recent years as it has become clear that ITER and many tokamak pilot plant concepts must operate near or above the widely-used Greenwald limit to achieve their objectives. Evidence has also grown that the Greenwa… ▽ More The "density limit" is one of the fundamental bounds on tokamak operating space, and is commonly estimated via the empirical Greenwald scaling. This limit has garnered renewed interest in recent years as it has become clear that ITER and many tokamak pilot plant concepts must operate near or above the widely-used Greenwald limit to achieve their objectives. Evidence has also grown that the Greenwald scaling - in its remarkable simplicity - may not capture the full complexity of the disruptive density limit. In this study, we assemble a multi-machine database to quantify the effectiveness of the Greenwald limit as a predictor of the L-mode density limit and identify alternative stability metrics. We find that a two-parameter dimensionless boundary in the plasma edge, $ν_{*\rm, edge}^{\rm limit} = 3.0 β_{T,{\rm edge}}^{-0.4}$, achieves significantly higher accuracy (true negative rate of 97.7% at a true positive rate of 95%) than the Greenwald limit (true negative rate 86.1% at a true positive rate of 95%) across a multi-machine dataset including metal- and carbon-wall tokamaks (AUG, C-Mod, DIII-D, and TCV). The collisionality boundary presented here can be applied for density limit avoidance in current devices and in ITER, where it can be measured and responded to in real time. △ Less

Submitted 26 June, 2024; originally announced June 2024.

Comments: 27 pages, 9 figures

Fast 3D 31P B1+ map** with a weighted stack of spiral trajectory at 7 Tesla

Authors: Mark Widmaier, Antonia Kaiser, Salome Baup, Daniel Wenz, Katarzyna Pierzchala, Ying Xiao, Zhiwei Huang, Yun Jiang, Li**g Xin

Abstract: Purpose: Phosphorus Magnetic Resonance Spectroscopy (31P MRS) enables non-invasive assessment of energy metabolism, yet its application is hindered by sensitivity limitations. To overcome this, often high magnetic fields are used, leading to challenges such as spatial B_1^+ inhomogeneity and therefore the need for accurate flip angle determination in accelerated acquisitions with short repetition… ▽ More Purpose: Phosphorus Magnetic Resonance Spectroscopy (31P MRS) enables non-invasive assessment of energy metabolism, yet its application is hindered by sensitivity limitations. To overcome this, often high magnetic fields are used, leading to challenges such as spatial B_1^+ inhomogeneity and therefore the need for accurate flip angle determination in accelerated acquisitions with short repetition times (T_R). In response to these challenges, we propose a novel short T_R and look-up table-based Double-Angle Method for fast 3D 31P B_1^+ map** (fDAM). Methods: Our method incorporates 3D weighted stack of spiral gradient echo acquisitions and a frequency-selective pulse to enable efficient B_1^+ map** based on the phosphocreatine signal at 7T. Protocols were optimised using simulations and validated through phantom experiments. The method was validated in phantom experiments and skeletal muscle applications using a birdcage 1H/31P volume coil. Results: The results of fDAM were compared to the classical DAM (cDAM). A good correlation (r=0.94) was obtained between the two B_1^+ maps. A 3D 31P B_1^+ map** in the human calf muscle was achieved in about 10 min using a birdcage volume coil, with a 20% extended coverage relative to that of the cDAM (24 min). fDAM also enabled the first full brain coverage 31P 3D B_1^+ map** in approx. 10 min using a 1 Tx/ 32 Rx coil. Conclusion: fDAM is an efficient method for 31P 3D B_1^+ map**, showing promise for future applications in rapid 31P MRSI. △ Less

Submitted 26 June, 2024; originally announced June 2024.

Low Excess Noise, High Quantum Efficiency Avalanche Photodiodes for Beyond 2 μm Wavelength Detection

Authors: Hyemin Jung, Seunghyun Lee, Xiao **, Yifan Liu, Theodore J. Ronningen, Christoph H. Grein, John P. R. David, Sanjay Krishna

Abstract: The increasing concentration of greenhouse gases, notably CH4 and CO2, has fueled global temperature increases, intensifying concerns regarding the prevailing climate crisis. Effectively monitoring these gases demands a detector spanning the extended short-wavelength infrared (~2.4 μm) range, covering wavelengths of CH4 (1.65 μm) and CO2 (2.05 μm). The state-of-the-art HgCdTe avalanche photodetect… ▽ More The increasing concentration of greenhouse gases, notably CH4 and CO2, has fueled global temperature increases, intensifying concerns regarding the prevailing climate crisis. Effectively monitoring these gases demands a detector spanning the extended short-wavelength infrared (~2.4 μm) range, covering wavelengths of CH4 (1.65 μm) and CO2 (2.05 μm). The state-of-the-art HgCdTe avalanche photodetectors (APDs) offer exceptional performance metrics, including high gain (M) and low excess noise (F). However, their widespread adoption is hindered by inherent challenges such as manufacturability, reproducibility, and cost factors. Moreover, their reliance on cryogenic cooling adds to the cost, size, weight, and power of the system. We have demonstrated a linear mode APD combining an InGaAs/GaAsSb type-II superlattice absorber and an AlGaAsSb multiplier lattice matched to InP substrates. This APD has demonstrated a room temperature M of 178, a maximum measurable external quantum efficiency of 3560 % at 2 μm, an extremely low excess noise (F < 2 at M < 20), and a small temperature coefficient of breakdown (7.58 mV/K μm). Such a high performance APD with manufacturable semiconductor materials could lead to a rapid transition to a commercial III-V foundry, holding the promise of revolutionizing high-sensitivity receivers for greenhouse gas monitoring. △ Less

Submitted 25 June, 2024; originally announced June 2024.

Data-Driven Turbulence Modeling Approach for Cold-Wall Hypersonic Boundary Layers

Authors: Muhammad I. Zafar, Xuhui Zhou, Christopher J. Roy, David Stelter, Heng Xiao

Abstract: Wall-cooling effect in hypersonic boundary layers can significantly alter the near-wall turbulence behavior, which is not accurately modeled by traditional RANS turbulence models. To address this shortcoming, this paper presents a turbulence modeling approach for hypersonic flows with cold-wall conditions using an iterative ensemble Kalman method. Specifically, a neural-network-based turbulence mo… ▽ More Wall-cooling effect in hypersonic boundary layers can significantly alter the near-wall turbulence behavior, which is not accurately modeled by traditional RANS turbulence models. To address this shortcoming, this paper presents a turbulence modeling approach for hypersonic flows with cold-wall conditions using an iterative ensemble Kalman method. Specifically, a neural-network-based turbulence model is used to provide closure map** from mean flow quantities to Reynolds stress as well as a variable turbulent Prandtl number. Sparse observation data of velocity and temperature are used to train the turbulence model. This approach is analyzed using direct numerical simulation database for boundary layer flows over a flat plate with a Mach number between 6 and 14 and wall-to-recovery temperature ratios ranging from 0.18 to 0.76. Two training cases are conducted: 1) a single training case with observation data from one flow case, 2) a joint training case where data from two flow cases are simultaneously used for training. Trained models are also tested for generalizability on the remaining flow cases in each of the training cases. The results are also analyzed for insights to inform the future work towards enhancing the generalizability of the learned turbulence model. △ Less

Submitted 25 June, 2024; originally announced June 2024.

Proposal for the generation of continuous-wave vacuum ultraviolet laser light for Th-229 isomer precision spectroscopy

Authors: Qi Xiao, Gleb Penyazkov, Ruihan Yu, Beichen Huang, Jiatong Li, Juanlang Shi, Yanmei Yu, Yuxiang Mo, Shiqian Ding

Abstract: We propose to generate continuous-wave vacuum ultraviolet (VUV) laser light at 148.4 nm using four-wave mixing in cadmium vapor for precision spectroscopy of the Th-229 isomer transition. Due to the large transition matrix elements of cadmium, the readily accessible wavelengths for the incident laser beams, and the high coherence of the four-wave mixing process, over 30 $μ$W of VUV power can be ge… ▽ More We propose to generate continuous-wave vacuum ultraviolet (VUV) laser light at 148.4 nm using four-wave mixing in cadmium vapor for precision spectroscopy of the Th-229 isomer transition. Due to the large transition matrix elements of cadmium, the readily accessible wavelengths for the incident laser beams, and the high coherence of the four-wave mixing process, over 30 $μ$W of VUV power can be generated with a narrow linewidth. This development paves the way for coherently driving the Th-229 isomer transition and develo** the nuclear optical clock. △ Less

Submitted 24 June, 2024; originally announced June 2024.

Performance of the plastic scintillator modules for the top veto tracker of the Taishan Antineutrino Observatory

Authors: Guang Luo, Xiaohao Yin, Fengpeng An, Zhimin Wang, Y. K. Hor, Peizhi Lu, Ruhui Li, Yichen Li, Wei He, Wei Wang, Xiang Xiao

Abstract: For tracking and tagging the cosmic-ray muon (CR-muon), the Taishan Antineutrino Observatory (TAO) experiment is equipped with a top veto tracker (TVT) system composed of 160 modules, each consisting of plastic scintillator (PS) strip as target material, embedded wavelength shifting fiber (WLS-fiber) as photon collection and transmission medium, and silicon photomultipliers (SiPMs) at both ends as… ▽ More For tracking and tagging the cosmic-ray muon (CR-muon), the Taishan Antineutrino Observatory (TAO) experiment is equipped with a top veto tracker (TVT) system composed of 160 modules, each consisting of plastic scintillator (PS) strip as target material, embedded wavelength shifting fiber (WLS-fiber) as photon collection and transmission medium, and silicon photomultipliers (SiPMs) at both ends as read-out. This article introduces the unique design of the module and reports the excellent performance of all modules, providing guidance and important reference for the process design of scintillation detectors with WLS-fibers. In general, when the CR-muon hits the center of plastic scintillator and without optical grease, the most probable value of the signal amplitude at one end of the PS strip is greater than 40.8 p.e. and 51.5 p.e. for all the 2 m-length modules and 1.5 m-length modules respectively. The CR-muon tagging efficiency of PS module is measured to be more than 99.3%, which meets the requirement of TAO. △ Less

Submitted 22 June, 2024; originally announced June 2024.

Achieving Cooling Without Repump Lasers Through Ion Motional Heating

Authors: Yue Xiao, Yongxu Peng, Linfeng Chen, Chunhui Li, Zongao Song, Xin Wang, Tao Wang, Yurun Xie, Bin Zhao, Tiangang Yang

Abstract: Laser cooling typically requires one or more repump lasers to clear dark states and enable recycling transitions. Here, we have achieved cooling of Be+ ions using a single laser beam, facilitated by one-dimensional heating through micromotion. By manipulating the displacement from the trap's nodal line, we precisely controlled the ion micromotion direction and speed, reaching up to 3144 m/s, which… ▽ More Laser cooling typically requires one or more repump lasers to clear dark states and enable recycling transitions. Here, we have achieved cooling of Be+ ions using a single laser beam, facilitated by one-dimensional heating through micromotion. By manipulating the displacement from the trap's nodal line, we precisely controlled the ion micromotion direction and speed, reaching up to 3144 m/s, which corresponds to a 7.1 GHz Doppler frequency shift in our experiment. This approach eliminates the necessity of a 1.25 GHz offset repump laser while kee** the Be+ ions cold in the perpendicular direction. Measurements were taken using cooling laser detuning and imaging of ion trajectories. Molecular dynamics simulations, based on machine learned time-dependent electric field E(X, Y, Z, t) inside the trap, accurately reproduced the experimental observation, illuminating the relationship between the direction of micromotion and the trap** electric filed vector. This work not only provides a robust method for managing the micromotion velocity of ions but also sheds light on laser cooling complex systems that require multiple repum** lasers. Additionally, it offers a method for controlling energy in the context of ion-molecule collision investigations. △ Less

Submitted 20 June, 2024; originally announced June 2024.

Beam test results of the prototype of the multi wire drift chamber for the CSR external-target experiment

Authors: Zhi Qin, Zhoubo He, Zhe Cao, Tao Chen, Zhi Deng, Limin Duan, Dong Guo, Rongjiang Hu, Jie Kong, Canwen Liu, Peng Ma, Xianglun Wei, Shihai Wen, Xiangjie Wen, Junwei Yan, Herun Yang, Zuoqiao Yang, Yuhong Yu, Zhigang Xiao

Abstract: The half-size prototype of the multi wire drift chamber (MWDC) for the cooling storage ring (CSR) external-target experiment (CEE) was assembled and tested in 350 MeV/u Kr+Fe reactions on the heavy ion research facility in Lanzhou (HIRFL). The prototype consists of 6 sense layers, where the sense wires are stretched in three directions X, U and V, meeting $0^\circ$, $30^\circ$ and $-30^\circ$ with… ▽ More The half-size prototype of the multi wire drift chamber (MWDC) for the cooling storage ring (CSR) external-target experiment (CEE) was assembled and tested in 350 MeV/u Kr+Fe reactions on the heavy ion research facility in Lanzhou (HIRFL). The prototype consists of 6 sense layers, where the sense wires are stretched in three directions X, U and V, meeting $0^\circ$, $30^\circ$ and $-30^\circ$ with respect to the vertical axis, respectively. The sensitive area of the prototype is $76 {\rm cm} \times 76 {\rm cm}$. The amplified and shaped signals from the anode wires are digitized in a serial capacity array. Being operated with 1500 V high voltage on the anode wires, the efficiency for each layer is beyond 95\%. The tracking residual is about $301 \pm 2 \rm μm$. The performance meets the requirements of CEE. △ Less

Submitted 15 May, 2024; originally announced June 2024.

The Design, Implementation, and Performance of the LZ Calibration Systems

Authors: J. Aalbers, D. S. Akerib, A. K. Al Musalhi, F. Alder, C. S. Amarasinghe, A. Ames, T. J. Anderson, N. Angelides, H. M. Araújo, J. E. Armstrong, M. Arthurs, A. Baker, S. Balashov, J. Bang, E. E. Barillier, J. W. Bargemann, K. Beattie, T. Benson, A. Bhatti, A. Biekert, T. P. Biesiadzinski, H. J. Birch, E. Bishop, G. M. Blockinger, B. Boxer , et al. (179 additional authors not shown)

Abstract: LUX-ZEPLIN (LZ) is a tonne-scale experiment searching for direct dark matter interactions and other rare events. It is located at the Sanford Underground Research Facility (SURF) in Lead, South Dakota, USA. The core of the LZ detector is a dual-phase xenon time projection chamber (TPC), designed with the primary goal of detecting Weakly Interacting Massive Particles (WIMPs) via their induced low e… ▽ More LUX-ZEPLIN (LZ) is a tonne-scale experiment searching for direct dark matter interactions and other rare events. It is located at the Sanford Underground Research Facility (SURF) in Lead, South Dakota, USA. The core of the LZ detector is a dual-phase xenon time projection chamber (TPC), designed with the primary goal of detecting Weakly Interacting Massive Particles (WIMPs) via their induced low energy nuclear recoils. Surrounding the TPC, two veto detectors immersed in an ultra-pure water tank enable reducing background events to enhance the discovery potential. Intricate calibration systems are purposely designed to precisely understand the responses of these three detector volumes to various types of particle interactions and to demonstrate LZ's ability to discriminate between signals and backgrounds. In this paper, we present a comprehensive discussion of the key features, requirements, and performance of the LZ calibration systems, which play a crucial role in enabling LZ's WIMP-search and its broad science program. The thorough description of these calibration systems, with an emphasis on their novel aspects, is valuable for future calibration efforts in direct dark matter and other rare-event search experiments. △ Less

Submitted 20 June, 2024; v1 submitted 2 May, 2024; originally announced June 2024.

Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter

Authors: M. Aamir, B. Acar, G. Adamov, T. Adams, C. Adloff, S. Afanasiev, C. Agrawal, C. Agrawal, A. Ahmad, H. A. Ahmed, S. Akbar, N. Akchurin, B. Akgul, B. Akgun, R. O. Akpinar, E. Aktas, A. AlKadhim, V. Alexakhin, J. Alimena, J. Alison, A. Alpana, W. Alshehri, P. Alvarez Dominguez, M. Alyari, C. Amendola , et al. (550 additional authors not shown)

Abstract: A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr… ▽ More A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated. △ Less

Submitted 30 June, 2024; v1 submitted 17 June, 2024; originally announced June 2024.

Comments: Prepared for submission to JINST

Acceleration without Disruption: DFT Software as a Service

Authors: Fusong Ju, Xinran Wei, Lin Huang, Andrew J. Jenkins, Leo Xia, Jia Zhang, Jianwei Zhu, Han Yang, Bin Shao, Peggy Dai, Ashwin Mayya, Zahra Hooshmand, Alexandra Efimovskaya, Nathan A. Baker, Matthias Troyer, Hongbin Liu

Abstract: Density functional theory (DFT) has been a cornerstone in computational chemistry, physics, and materials science for decades, benefiting from advancements in computational power and theoretical methods. This paper introduces a novel, cloud-native application, Accelerated DFT, which offers an order of magnitude acceleration in DFT simulations. By integrating state-of-the-art cloud infrastructure a… ▽ More Density functional theory (DFT) has been a cornerstone in computational chemistry, physics, and materials science for decades, benefiting from advancements in computational power and theoretical methods. This paper introduces a novel, cloud-native application, Accelerated DFT, which offers an order of magnitude acceleration in DFT simulations. By integrating state-of-the-art cloud infrastructure and redesigning algorithms for graphic processing units (GPUs), Accelerated DFT achieves high-speed calculations without sacrificing accuracy. It provides an accessible and scalable solution for the increasing demands of DFT calculations in scientific communities. The implementation details, examples, and benchmark results illustrate how Accelerated DFT can significantly expedite scientific discovery across various domains. △ Less

Submitted 16 June, 2024; originally announced June 2024.

The coupling mechanism between crossed-beams energy transfer and stimulated Brillouin scattering in homogeneous plasmas

Authors: Y. Chen, Q. Wang, C. Y. Zheng, Z. J. Liu, L. H. Cao, C. Z. Xiao

Abstract: The coupling mechanism between crossed beams energy transfer and stimulated Brillouin scattering in homogeneous plasmas are studied by theoretical analysis, fluid simulations and particle in cell(PIC) simulations. The numerical models of laser plasma instabilities are constructed by solving coupling equations with Schodinger equations form, and the fluid simulation results are confirmed by fluid t… ▽ More The coupling mechanism between crossed beams energy transfer and stimulated Brillouin scattering in homogeneous plasmas are studied by theoretical analysis, fluid simulations and particle in cell(PIC) simulations. The numerical models of laser plasma instabilities are constructed by solving coupling equations with Schodinger equations form, and the fluid simulation results are confirmed by fluid theory and PIC simulations.In the parameter regime when the pump depletion does not occur in CBET and the reflectivity of SBS is lower than 1%, SBS will be affected by CBET, the CBET energy gain will still agree with theoretical predications. However, In the parameter regime when the pump depletion does occur in CBET and the reflectivity of SBS is higher than 1%, the CBET spatial gain will be reduced by the interaction of CBET and SBS, and the huge difference of SBS reflectivity for two crossed laser beams is observed.In the PIC simulations, we found that lower ZTe=Ti will significantly reduce the interaction between CBET and SBS (Z is the ion charge, Teis the electron temperature, Ti is the ion temperature). △ Less

Submitted 1 July, 2024; v1 submitted 15 June, 2024; originally announced June 2024.

Comments: 10pages,11 figures

Automated Molecular Concept Generation and Labeling with Large Language Models

Authors: Shichang Zhang, Botao Xia, Zimin Zhang, Qianli Wu, Fang Sun, Ziniu Hu, Yizhou Sun

Abstract: Artificial intelligence (AI) is significantly transforming scientific research. Explainable AI methods, such as concept-based models (CMs), are promising for driving new scientific discoveries because they make predictions based on meaningful concepts and offer insights into the prediction process. In molecular science, however, explainable CMs are not as common compared to black-box models like G… ▽ More Artificial intelligence (AI) is significantly transforming scientific research. Explainable AI methods, such as concept-based models (CMs), are promising for driving new scientific discoveries because they make predictions based on meaningful concepts and offer insights into the prediction process. In molecular science, however, explainable CMs are not as common compared to black-box models like Graph Neural Networks (GNNs), primarily due to their requirement for predefined concepts and manual label for each instance, which demand domain knowledge and can be labor-intensive. This paper introduces a novel framework for Automated Molecular Concept (AutoMolCo) generation and labeling. AutoMolCo leverages the knowledge in Large Language Models (LLMs) to automatically generate predictive molecular concepts and label them for each molecule. Such procedures are repeated through iterative interactions with LLMs to refine concepts, enabling simple linear models on the refined concepts to outperform GNNs and LLM in-context learning on several benchmarks. The whole AutoMolCo framework is automated without any human knowledge inputs in either concept generation, labeling, or refinement, thereby surpassing the limitations of extant CMs while maintaining their explainability and allowing easy intervention. Through systematic experiments on MoleculeNet and High-Throughput Experimentation (HTE) datasets, we demonstrate that the AutoMolCo-induced explainable CMs are beneficial and promising for molecular science research. △ Less

Submitted 13 June, 2024; originally announced June 2024.

Investigation of Q degradation in low-loss Si3N4 from heterogeneous laser integration

Authors: Joel Guo, Chao Xiang, Warren **, Jonathan Peters, Mingxiao Li, Theodore Morin, Yu Xia, John E. Bowers

Abstract: High-performance, high-volume-manufacturing Si3N4 photonics requires extremely low waveguide losses augmented with heterogeneously integrated lasers for applications beyond traditional markets of high-capacity interconnects. State-of-the-art quality factors (Q) over 200 million at 1550 nm have been shown previously; however, maintaining high Qs throughout laser fabrication has not been shown. Here… ▽ More High-performance, high-volume-manufacturing Si3N4 photonics requires extremely low waveguide losses augmented with heterogeneously integrated lasers for applications beyond traditional markets of high-capacity interconnects. State-of-the-art quality factors (Q) over 200 million at 1550 nm have been shown previously; however, maintaining high Qs throughout laser fabrication has not been shown. Here, Si3N4 resonator intrinsic Qs over 100 million are demonstrated on a fully integrated heterogeneous laser platform. Qi is measured throughout laser processing steps, showing degradation down to 50 million from dry etching, metal evaporation, and ion implant steps, and controllable recovery to over 100 million from annealing at 250C - 350C. △ Less

Submitted 13 June, 2024; originally announced June 2024.

Impacts of Backside Insulation on the Dynamic On-Resistance of Lateral p-GaN HEMTs-on-Si

Authors: Yu-Xuan Wang, Mao-Chou Tai, Ting-Chang Chang, Wei-Chen Huang, Zeyu Wan, Simon Li, Simon Sze, Guangrui Xia

Abstract: We examined the effect of backside insulation on the dynamic on-resistance of lateral p-GaN HEMTs. To gain a comprehensive understanding of the dynamic onresistance difference between substrate grounded and substrate floating p-GaN HEMTs, we conducted in-circuit double pulse testing and long-term direct current (DC) bias stress. We have realized that while backside insulation can enhance the break… ▽ More We examined the effect of backside insulation on the dynamic on-resistance of lateral p-GaN HEMTs. To gain a comprehensive understanding of the dynamic onresistance difference between substrate grounded and substrate floating p-GaN HEMTs, we conducted in-circuit double pulse testing and long-term direct current (DC) bias stress. We have realized that while backside insulation can enhance the breakdown voltage of lateral p-GaN HEMTs, it also comes with a tradeoff in device reliability. Results through Sentaurus TCAD simulation suggest that the use of backside insulation in devices gradually disperses potential to the buffer barrier. As a result, the potential barrier at the buffer edge of the 2DEG channel decreases significantly, leading to considerable electron trap**s at buffer traps. This breakdown voltage and reliability tradeoff also applies to HEMT technologies using insulating substrates. △ Less

Submitted 12 June, 2024; originally announced June 2024.

A directional total variation minimization algorithm for isotropic resolution in digital breast tomosynthesis

Authors: Emil Y. Sidky, Xiangyi Wu, Xiaoyu Duan, Hailing Huang, Wei Zhao, Leo Y. Zhang, John Paul Phillips, Zheng Zhang, Buxin Chen, Dan Xia, Ingrid S. Reiser, Xiaochuan Pan

Abstract: An optimization-based image reconstruction algorithm is developed for contrast enhanced digital breast tomosynthesis (DBT) using dual-energy scanning. The algorithm minimizes directional total variation (TV) with a data discrepancy and non-negativity constraints. Iodinated contrast agent (ICA) imaging is performed by reconstructing images from dual-energy DBT data followed by weighted subtraction.… ▽ More An optimization-based image reconstruction algorithm is developed for contrast enhanced digital breast tomosynthesis (DBT) using dual-energy scanning. The algorithm minimizes directional total variation (TV) with a data discrepancy and non-negativity constraints. Iodinated contrast agent (ICA) imaging is performed by reconstructing images from dual-energy DBT data followed by weighted subtraction. Physical DBT data is acquired with a Siemens Mammomat scanner of a structured breast phantom with ICA inserts. Results are shown for both directional TV minimization and filtered back-projection for reference. It is seen that directional TV is able to substantially reduce depth blur for the ICA objects. △ Less

Submitted 11 June, 2024; originally announced June 2024.

Comments: Proceedings paper for accepted contribution to the 8th International Conference on Image Formation in X-Ray Computed Tomography (https://www.ct-meeting.org)

PANDORA: Deep graph learning based COVID-19 infection risk level forecasting

Authors: Shuo Yu, Feng Xia, Yueru Wang, Shihao Li, Falih Febrinanto, Madhu Chetty

Abstract: COVID-19 as a global pandemic causes a massive disruption to social stability that threatens human life and the economy. Policymakers and all elements of society must deliver measurable actions based on the pandemic's severity to minimize the detrimental impact of COVID-19. A proper forecasting system is arguably important to provide an early signal of the risk of COVID-19 infection so that the au… ▽ More COVID-19 as a global pandemic causes a massive disruption to social stability that threatens human life and the economy. Policymakers and all elements of society must deliver measurable actions based on the pandemic's severity to minimize the detrimental impact of COVID-19. A proper forecasting system is arguably important to provide an early signal of the risk of COVID-19 infection so that the authorities are ready to protect the people from the worst. However, making a good forecasting model for infection risks in different cities or regions is not an easy task, because it has a lot of influential factors that are difficult to be identified manually. To address the current limitations, we propose a deep graph learning model, called PANDORA, to predict the infection risks of COVID-19, by considering all essential factors and integrating them into a geographical network. The framework uses geographical position relations and transportation frequency as higher-order structural properties formulated by higher-order network structures (i.e., network motifs). Moreover, four significant node attributes (i.e., multiple features of a particular area, including climate, medical condition, economy, and human mobility) are also considered. We propose three different aggregators to better aggregate node attributes and structural features, namely, Hadamard, Summation, and Connection. Experimental results over real data show that PANDORA outperforms the baseline method with higher accuracy and faster convergence speed, no matter which aggregator is chosen. We believe that PANDORA using deep graph learning provides a promising approach to get superior performance in infection risk level forecasting and help humans battle the COVID-19 crisis. △ Less

Submitted 7 June, 2024; originally announced June 2024.

Observation of higher-order time-dislocation topological modes

Authors: Jia-Hui Zhang, Feng Mei, Yi Li, Ching Hua Lee, Jie Ma, Liantuan Xiao, Suotang Jia

Abstract: Topological dislocation modes resulting from the interplay between spatial dislocations and momentum-space topology have recently attracted significant interest. Here, we theoretically and experimentally demonstrate time-dislocation topological modes which are induced by the interplay between temporal dislocations and Floquet-band topology. By utilizing an extra physical dimension to represent the… ▽ More Topological dislocation modes resulting from the interplay between spatial dislocations and momentum-space topology have recently attracted significant interest. Here, we theoretically and experimentally demonstrate time-dislocation topological modes which are induced by the interplay between temporal dislocations and Floquet-band topology. By utilizing an extra physical dimension to represent the frequency-space lattice, we implement a two-dimensional Floquet higher-order topological phase and observe time-dislocation induced $π$-mode topological corner modes in a three-dimensional circuit metamaterial. Intriguingly, the realized time-dislocation topological modes exhibit spatial localization at the temporal dislocation, despite homogeneous in-plane lattice couplings across it. Our study opens a new avenue to explore the topological phenomena enabled by the interplay between real-space, time-space and momentum-space topology. △ Less

Submitted 7 June, 2024; originally announced June 2024.

Comments: 9 pages, 4 figures

SynAsk: Unleashing the Power of Large Language Models in Organic Synthesis

Authors: Chonghuan Zhang, Qianghua Lin, Biwei Zhu, Haopeng Yang, Xiao Lian, Hao Deng, Jiajun Zheng, Kuangbiao Liao

Abstract: The field of natural language processing (NLP) has witnessed a transformative shift with the emergence of large language models (LLMs), revolutionizing various language tasks and applications, and the integration of LLM into specialized domains enhances their capabilities for domain-specific applications. Notably, NLP has made significant strides in organic chemistry, particularly in predicting sy… ▽ More The field of natural language processing (NLP) has witnessed a transformative shift with the emergence of large language models (LLMs), revolutionizing various language tasks and applications, and the integration of LLM into specialized domains enhances their capabilities for domain-specific applications. Notably, NLP has made significant strides in organic chemistry, particularly in predicting synthetic tasks, paving the way for the development of LLMs tailored to the organic chemistry field. In this work, we introduce SynAsk, a comprehensive organic chemistry domain-specific LLM platform developed by AIChemEco Inc. By finetuning an LLM with domain-specific data and integrating it with a chain of thought approach, SynAsk seamlessly accesses our knowledge base and advanced chemistry tools in a question-and-answer format. This includes functionalities such as a basic chemistry knowledge base, molecular information retrieval, reaction performance prediction, retrosynthesis prediction, chemical literature acquisition, and more. This novel methodology synergizes fine-tuning techniques with external resource integration, resulting in an organic chemistry-specific model poised to facilitate research and discovery in the field. Accessible via http://synask.aichemeco.com, SynAsk represents a significant advancement in leveraging NLP for synthetic applications. △ Less

Submitted 13 June, 2024; v1 submitted 6 June, 2024; originally announced June 2024.

Velocity Scanning Tomography for Room-Temperature Quantum Simulation

Authors: Jiefei Wang, Ruosong Mao, Xingqi Xu, Yunzhou Lu, Jianhao Dai, Xiao Liu, Gang-Qin Liu, Dawei Lu, Huizhu Hu, Shi-Yao Zhu, Han Cai, Da-Wei Wang

Abstract: Quantum simulation offers an analog approach for exploring exotic quantum phenomena using controllable platforms, typically necessitating ultracold temperatures to maintain the quantum coherence. Superradiance lattices (SLs) have been harnessed to simulate coherent topological physics at room temperature, but the thermal motion of atoms remains a notable challenge in accurately measuring the physi… ▽ More Quantum simulation offers an analog approach for exploring exotic quantum phenomena using controllable platforms, typically necessitating ultracold temperatures to maintain the quantum coherence. Superradiance lattices (SLs) have been harnessed to simulate coherent topological physics at room temperature, but the thermal motion of atoms remains a notable challenge in accurately measuring the physical quantities. To overcome this obstacle, we invent and validate a velocity scanning tomography technique to discern the responses of atoms with different velocities, allowing cold-atom spectroscopic resolution within room-temperature SLs. By comparing absorption spectra with and without atoms moving at specific velocities, we can derive the Wannier-Stark ladders of the SL across various effective static electric fields, their strengths being proportional to the atomic velocities. We extract the Zak phase of the SL by monitoring the ladder frequency shift as a function of the atomic velocity, effectively demonstrating the topological winding of the energy bands. Our research signifies the feasibility of room-temperature quantum simulation and facilitates their applications in quantum information processing. △ Less

Submitted 4 June, 2024; originally announced June 2024.

Comments: 6 pages, 4 figures

A table-top high-sensitivity gyroscope based on slow light and cavity enhanced photon drag

Authors: Min She, Jiangshan Tang, Keyu Xia

Abstract: A high-sensitivity gyroscope is vital for both investigation of the fundamental physics and monitor of the subtle variation of Earth's behaviors. However, it is challenge to realize a portable gyroscope with sensitivity approaching a small fraction of the Earth's rotation rate. Here, we theoretically propose a method for implementing a table-top gyroscope with remarkably high sensitivity based on… ▽ More A high-sensitivity gyroscope is vital for both investigation of the fundamental physics and monitor of the subtle variation of Earth's behaviors. However, it is challenge to realize a portable gyroscope with sensitivity approaching a small fraction of the Earth's rotation rate. Here, we theoretically propose a method for implementing a table-top gyroscope with remarkably high sensitivity based on photon drag in a rotating dielectric object. By inserting an $\text{Er}^{3+}$-doped glass rod in a Fabry-Pérot optical cavity with only 20 cm length, we theoretically show that the giant group refractive index and the narrowing cavity linewidth due to slow light can essentially increase the nonreciprocal phase shift due to the photon drag to achieve a rotation sensitivity of $26$ frad/s/$\sqrt{Hz}$. This work paves the way to accurately detect tiny variations of the Earth's rotation rate and orientation, and even can test the geodetic and frame-dragging effects predicted by the general relativity with a small-volume equipment. △ Less

Submitted 3 June, 2024; originally announced June 2024.

Molecular-Resolution Imaging of Ice Crystallized from Liquid Water

Authors: **gshan S. Du, Suvo Banik, Henry Chan, Birk Fritsch, Ying Xia, Andreas Hutzler, Subramanian K. R. S. Sankaranarayanan, James J. De Yoreo

Abstract: Despite the ubiquity of ice, a molecular-resolution image of ice crystallized from liquid water or the resulting defect structure has never been obtained. Here, we report the stabilization and angstrom-resolution electron imaging of ice Ih crystallized from liquid water. We combine lattice map** with molecular dynamics simulations to reveal that ice formation is highly tolerant to nanoscale defe… ▽ More Despite the ubiquity of ice, a molecular-resolution image of ice crystallized from liquid water or the resulting defect structure has never been obtained. Here, we report the stabilization and angstrom-resolution electron imaging of ice Ih crystallized from liquid water. We combine lattice map** with molecular dynamics simulations to reveal that ice formation is highly tolerant to nanoscale defects such as misoriented subdomains and trapped gas bubbles, which are stabilized by molecular-scale structural motifs. Importantly, bubble surfaces adopt low-energy nanofacets and create negligible strain fields in the surrounding crystal. These bubbles can dynamically nucleate, grow, migrate, dissolve, and coalesce under electron irradiation and be monitored in situ near a steady state. This work opens the door to understanding water crystallization behaviors at an unprecedented spatial resolution. △ Less

Submitted 4 June, 2024; v1 submitted 2 June, 2024; originally announced June 2024.

Comments: 15 pages, 4 figures, and 1 table. Supplementary Materials: 35 pages, 25 figures, and 9 tables. Updated to resolve the equation typesetting issue

Non-destructive Degradation Pattern Decoupling for Ultra-early Battery Prototype Verification Using Physics-informed Machine Learning

Authors: Shengyu Tao, Mengtian Zhang, Zixi Zhao, Haoyang Li, Ruifei Ma, Yunhong Che, Xin Sun, Lin Su, Xiangyu Chen, Zihao Zhou, Heng Chang, Tingwei Cao, Xiao Xiao, Yaojun Liu, Wenjun Yu, Zhongling Xu, Yang Li, Han Hao, Xuan Zhang, Xiaosong Hu, Guangmin ZHou

Abstract: Manufacturing complexities and uncertainties have impeded the transition from material prototypes to commercial batteries, making prototype verification critical to quality assessment. A fundamental challenge involves deciphering intertwined chemical processes to characterize degradation patterns and their quantitative relationship with battery performance. Here we show that a physics-informed mac… ▽ More Manufacturing complexities and uncertainties have impeded the transition from material prototypes to commercial batteries, making prototype verification critical to quality assessment. A fundamental challenge involves deciphering intertwined chemical processes to characterize degradation patterns and their quantitative relationship with battery performance. Here we show that a physics-informed machine learning approach can quantify and visualize temporally resolved losses concerning thermodynamics and kinetics only using electric signals. Our method enables non-destructive degradation pattern characterization, expediting temperature-adaptable predictions of entire lifetime trajectories, rather than end-of-life points. The verification speed is 25 times faster yet maintaining 95.1% accuracy across temperatures. Such advances facilitate more sustainable management of defective prototypes before massive production, establishing a 19.76 billion USD scrap material recycling market by 2060 in China. By incorporating stepwise charge acceptance as a measure of the initial manufacturing variability of normally identical batteries, we can immediately identify long-term degradation variations. We attribute the predictive power to interpreting machine learning insights using material-agnostic featurization taxonomy for degradation pattern decoupling. Our findings offer new possibilities for dynamic system analysis, such as battery prototype degradation, demonstrating that complex pattern evolutions can be accurately predicted in a non-destructive and data-driven fashion by integrating physics-informed machine learning. △ Less

Submitted 31 May, 2024; originally announced June 2024.

ACM Class: J.2; G.3

Realization of a cold atom gyroscope in space

Authors: **ting Li, Xi Chen, Danfang Zhang, Wenzhang Wang, Yang Zhou, Meng He, Jie Fang, Lin Zhou, Chuan He, Junjie Jiang, Huanyao Sun, Qunfeng Chen, Lei Qin, Xiao Li, Yibo Wang, Xiaowei Zhang, Jiaqi Zhong, Runbing Li, Meizhen An, Long Zhang, Shuquan Wang, Zongfeng Li, ** Wang, Mingsheng Zhan

Abstract: High precision gyroscopes in space are important for sophisticated scientific experiments and deep space navigation. Microgravity in the space provides an ideal condition for operation of a cold atom gyroscope. To demonstrate this advantage, an atom interferometer (AI) was launched and installed in the China Space Station in 2022. Here reported is a realization of the cold atom gyroscope with this… ▽ More High precision gyroscopes in space are important for sophisticated scientific experiments and deep space navigation. Microgravity in the space provides an ideal condition for operation of a cold atom gyroscope. To demonstrate this advantage, an atom interferometer (AI) was launched and installed in the China Space Station in 2022. Here reported is a realization of the cold atom gyroscope with this AI. By applying point source interferometry, spatial fringes are obtained and acceleration and rotation are extracted. The angles of the Raman lasers are precisely calibrated to avoid measurement error, and other systematic errors are also considered for the rotation measurement. The evaluated rotation measurement is (-115.64+/-1.71)*10^-5 rad/s in space, and an acceleration measurement resolution of 1.03*10^-6 m/s^2 is also obtained for a single image. This study conducts the first AI-based gyroscope in space and paves a way for future space-based AI experiments. △ Less

Submitted 31 May, 2024; originally announced May 2024.

Comments: 12 pages, 5 figures

Correlation effects in magic-angle twisted bilayer graphene: An auxiliary-field quantum Monte Carlo study

Authors: Zhi-Yu Xiao, Shiwei Zhang

Abstract: Magic angle twisted bilayer graphene (MATBG) presents a fascinating platform for investigating the effects of electron interactions in topological flat bands. The Bistritzer-MacDonald (BM) model provides a simplified quantitative description of the flat bands. Introducing long-range Coulomb interactions leads to an interacting BM (IBM) Hamiltonian, a momentum-space continuum description which offe… ▽ More Magic angle twisted bilayer graphene (MATBG) presents a fascinating platform for investigating the effects of electron interactions in topological flat bands. The Bistritzer-MacDonald (BM) model provides a simplified quantitative description of the flat bands. Introducing long-range Coulomb interactions leads to an interacting BM (IBM) Hamiltonian, a momentum-space continuum description which offers a very natural starting point for many-body studies of MATBG. Accurate and reliable many-body computations in the IBM model are challenging, however, and have been limited mostly to special fillings, or smaller lattice sizes. We employ state-of-the-art auxiliary-field quantum Monte Carlo (AFQMC) method to study the IBM model, which constrains the sign problem to enable accurate treatment of large system sizes. We determine ground-state properties and quantify errors compared to mean-field theory calculations. Our calculations identify correlated metal states and their competition with the insulating Kramers inter-valley coherent state at both half-filling and charge neutrality. Additionally, we investigate one- and three-quarter fillings, and examine the effect of many-body corrections beyond single Slater determinant solutions. We discuss the effect that details of the IBM Hamiltonian have on the results, including different forms of double-counting corrections, and the need to establish and precisely specify many-body Hamiltonians to allow more direct and quantitative comparisons with experiments in MATBG. △ Less

Submitted 5 June, 2024; v1 submitted 28 May, 2024; originally announced May 2024.

Shape of a droplet on a surface in the presence of an external field and its critical disruption condition

Authors: **g Li, Kaiqiang Wen, Ke Xiao, Xiaoming Chen, Chen-Xu Wu

Abstract: Due to the potential application of regulating droplet shape by external fields in microfluidic technology and micro devices, it becomes increasingly important to understand the shape formation of a droplet in the presence of an electric field. How to understand and determine such a deformable boundary shape at equilibrium has been a long-term physical and mathematical challenge. Here, based on th… ▽ More Due to the potential application of regulating droplet shape by external fields in microfluidic technology and micro devices, it becomes increasingly important to understand the shape formation of a droplet in the presence of an electric field. How to understand and determine such a deformable boundary shape at equilibrium has been a long-term physical and mathematical challenge. Here, based on the theoretical model we propose, and combining the finite element method and the gradient descent algorithm, we successfully obtain the droplet shape by considering the contributions made by electrostatic energy, surface tension energy, and gravitational potential energy. We also carry out scaling analyses and obtain an empirical critical disruption condition with a universal scaling exponent 1/2 for the contact angle in terms of normalized volume. The master curve fits both the experimental and the numerical results very well. △ Less

Submitted 25 May, 2024; originally announced May 2024.

Impact of crystal symmetries and Weyl nodes on high-harmonic generation in Weyl semimetal TaAs

Authors: Xiao Zhang, Jeroen van den Brink, **bin Li

Abstract: High-harmonic generation (HHG) offers an all-optical approach to discern structural symmetries through its selection rules and probe topological phases with its spectral signatures. Here we develop a universal theoretical framework -- the Jones matrix formalism -- establishing the fundamental relationship between pulse-crystal shared symmetries and HHG selection rules. Applying this to the Weyl se… ▽ More High-harmonic generation (HHG) offers an all-optical approach to discern structural symmetries through its selection rules and probe topological phases with its spectral signatures. Here we develop a universal theoretical framework -- the Jones matrix formalism -- establishing the fundamental relationship between pulse-crystal shared symmetries and HHG selection rules. Applying this to the Weyl semimetal (WSM) material TaAs, shows that the anomalous harmonics excited by linearly and circularly polarized pulses are governed respectively by the shared twofold and fourfold rotational symmetries of laser pulses and lattice, rather than the topology of Weyl nodes. The common observables of HHG, including intensity, circular dichroism, ellipticity dependence, and carrier-envelope phase dependence, are not found to carry a signature of the Weyl cones. This insight into TaAs can be extended to other WSMs, indicating that HHG is not a particularly effective tool for investigating the topological features of WSMs. However, the Jones matrix formalism lays the groundwork for both HHG probing crystal symmetry and controlling harmonic polarization states. △ Less

Submitted 25 May, 2024; originally announced May 2024.

Comments: 21 pages, 14 figures

CPT-Interp: Continuous sPatial and Temporal Motion Modeling for 4D Medical Image Interpolation

Authors: Xia Li, Runzhao Yang, Xiangtai Li, Antony Lomax, Ye Zhang, Joachim Buhmann

Abstract: Motion information from 4D medical imaging offers critical insights into dynamic changes in patient anatomy for clinical assessments and radiotherapy planning and, thereby, enhances the capabilities of 3D image analysis. However, inherent physical and technical constraints of imaging hardware often necessitate a compromise between temporal resolution and image quality. Frame interpolation emerges… ▽ More Motion information from 4D medical imaging offers critical insights into dynamic changes in patient anatomy for clinical assessments and radiotherapy planning and, thereby, enhances the capabilities of 3D image analysis. However, inherent physical and technical constraints of imaging hardware often necessitate a compromise between temporal resolution and image quality. Frame interpolation emerges as a pivotal solution to this challenge. Previous methods often suffer from discretion when they estimate the intermediate motion and execute the forward war**. In this study, we draw inspiration from fluid mechanics to propose a novel approach for continuously modeling patient anatomic motion using implicit neural representation. It ensures both spatial and temporal continuity, effectively bridging Eulerian and Lagrangian specifications together to naturally facilitate continuous frame interpolation. Our experiments across multiple datasets underscore the method's superior accuracy and speed. Furthermore, as a case-specific optimization (training-free) approach, it circumvents the need for extensive datasets and addresses model generalization issues. △ Less

Submitted 24 May, 2024; originally announced May 2024.