Showing 1–36 of 36 results for author: Xi, Y

Spectral-Refiner: Fine-Tuning of Accurate Spatiotemporal Neural Operator for Turbulent Flows

Authors: Shuhao Cao, Francesco Brarda, Ruipeng Li, Yuanzhe Xi

Abstract: Recent advancements in operator-type neural networks have shown promising results in approximating the solutions of spatiotemporal Partial Differential Equations (PDEs). However, these neural networks often entail considerable training expenses, and may not always achieve the desired accuracy required in many scientific and engineering disciplines. In this paper, we propose a new Spatiotemporal Fo… ▽ More Recent advancements in operator-type neural networks have shown promising results in approximating the solutions of spatiotemporal Partial Differential Equations (PDEs). However, these neural networks often entail considerable training expenses, and may not always achieve the desired accuracy required in many scientific and engineering disciplines. In this paper, we propose a new Spatiotemporal Fourier Neural Operator (SFNO) that learns maps between Bochner spaces, and a new learning framework to address these issues. This new paradigm leverages wisdom from traditional numerical PDE theory and techniques to refine the pipeline of commonly adopted end-to-end neural operator training and evaluations. Specifically, in the learning problems for the turbulent flow modeling by the Navier-Stokes Equations (NSE), the proposed architecture initiates the training with a few epochs for SFNO, concluding with the freezing of most model parameters. Then, the last linear spectral convolution layer is fine-tuned without the frequency truncation. The optimization uses a negative Sobolev norm for the first time as the loss in operator learning, defined through a reliable functional-type \emph{a posteriori} error estimator whose evaluation is almost exact thanks to the Parseval identity. This design allows the neural operators to effectively tackle low-frequency errors while the relief of the de-aliasing filter addresses high-frequency errors. Numerical experiments on commonly used benchmarks for the 2D NSE demonstrate significant improvements in both computational efficiency and accuracy, compared to end-to-end evaluation and traditional numerical PDE solvers. △ Less

Submitted 27 May, 2024; originally announced May 2024.

MSC Class: 65M70 (Primary); 35Q30; 76M22; 65M50; 68T07 (Secondary)

Full-length-body CBCT imaging in upright position with robotic-arm system: a simulation study

Authors: Tong Lin, Tianling Lyu, Zhan Wu, Yan Xi, Wentao Zhu, Yang Chen

Abstract: Upright position CT scans make it possible for full-length-body imaging at conditions more relevant to daily situations, but the substantial weight of the upright CT scanners increases the risks to floor's stability and patients'safety. Robotic-arm CBCT systems are supposed to be a better solution for this task, but such systems still face challenges including long scanning time and low reconstruc… ▽ More Upright position CT scans make it possible for full-length-body imaging at conditions more relevant to daily situations, but the substantial weight of the upright CT scanners increases the risks to floor's stability and patients'safety. Robotic-arm CBCT systems are supposed to be a better solution for this task, but such systems still face challenges including long scanning time and low reconstruction quality. To address the above challenges, this paper proposes a novel method to calculate optimal scanning pitch based on data completeness analysis, which can complete the whole-body scan in the shortest time without a significant decline in image quality. Besides, an FDK-style reconstruction method based on normalized projections is proposed to obtain fast image reconstruction. Extensive experiments prove the effectiveness of the proposed optimal scanning trajectory. Qualitative and quantitative comparisons with FDK and iterative algorithms show that the proposed reconstruction method can obtain high imaging quality with reasonable computation costs. The method proposed in this paper is expected to promote the application of robotic-arm CBCT systems in orthopedic functional analysis. △ Less

Submitted 9 November, 2023; originally announced November 2023.

Comments: Submitted to ISBI'24

PDS-MAR: a fine-grained Projection-Domain Segmentation-based Metal Artifact Reduction method for intraoperative CBCT images with guidewires

Authors: Tianling Lyu, Zhan Wu, Gege Ma, Chen Jiang, Xinyun Zhong, Yan Xi, Yang Chen, Wentao Zhu

Abstract: Since the invention of modern CT systems, metal artifacts have been a persistent problem. Due to increased scattering, amplified noise, and insufficient data collection, it is more difficult to suppress metal artifacts in cone-beam CT, limiting its use in human- and robot-assisted spine surgeries where metallic guidewires and screws are commonly used. In this paper, we demonstrate that conventiona… ▽ More Since the invention of modern CT systems, metal artifacts have been a persistent problem. Due to increased scattering, amplified noise, and insufficient data collection, it is more difficult to suppress metal artifacts in cone-beam CT, limiting its use in human- and robot-assisted spine surgeries where metallic guidewires and screws are commonly used. In this paper, we demonstrate that conventional image-domain segmentation-based MAR methods are unable to eliminate metal artifacts for intraoperative CBCT images with guidewires. To solve this problem, we present a fine-grained projection-domain segmentation-based MAR method termed PDS-MAR, in which metal traces are augmented and segmented in the projection domain before being inpainted using triangular interpolation. In addition, a metal reconstruction phase is proposed to restore metal areas in the image domain. The digital phantom study and real CBCT data study demonstrate that the proposed algorithm achieves significantly better artifact suppression than other comparing methods and has the potential to advance the use of intraoperative CBCT imaging in clinical spine surgeries. △ Less

Submitted 20 June, 2023; originally announced June 2023.

Comments: 19 Pages

Journal ref: Phys. Med. Biol. 68 215007 (2023)

The JUNO experiment Top Tracker

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato , et al. (592 additional authors not shown)

Abstract: The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector… ▽ More The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector, covering about 60% of the surface above them. The JUNO Top Tracker is constituted by the decommissioned OPERA experiment Target Tracker modules. The technology used consists in walls of two planes of plastic scintillator strips, one per transverse direction. Wavelength shifting fibres collect the light signal emitted by the scintillator strips and guide it to both ends where it is read by multianode photomultiplier tubes. Compared to the OPERA Target Tracker, the JUNO Top Tracker uses new electronics able to cope with the high rate produced by the high rock radioactivity compared to the one in Gran Sasso underground laboratory. This paper will present the new electronics and mechanical structure developed for the Top Tracker of JUNO along with its expected performance based on the current detector simulation. △ Less

Submitted 9 March, 2023; originally announced March 2023.

Comments: 20 pages

Journal ref: Nucl.Instrum.Meth.A 1057 (2023) 168680

JUNO sensitivity to $^7$Be, $pep$, and CNO solar neutrinos

Authors: Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Marco Beretta , et al. (592 additional authors not shown)

Abstract: The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented… ▽ More The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented levels of precision. In this paper, we provide estimation of the JUNO sensitivity to 7Be, pep, and CNO solar neutrinos that can be obtained via a spectral analysis above the 0.45 MeV threshold. This study is performed assuming different scenarios of the liquid scintillator radiopurity, ranging from the most opti mistic one corresponding to the radiopurity levels obtained by the Borexino experiment, up to the minimum requirements needed to perform the neutrino mass ordering determination with reactor antineutrinos - the main goal of JUNO. Our study shows that in most scenarios, JUNO will be able to improve the current best measurements on 7Be, pep, and CNO solar neutrino fluxes. We also perform a study on the JUNO capability to detect periodical time variations in the solar neutrino flux, such as the day-night modulation induced by neutrino flavor regeneration in Earth, and the modulations induced by temperature changes driven by helioseismic waves. △ Less

Submitted 7 March, 2023; originally announced March 2023.

Expected geoneutrino signal at JUNO using local integrated 3-D refined crustal model

Authors: Ran Han, ZhiWei Li, Ruohan Gao, Yao Sun, Ya Xu, Yufei Xi, Guangzheng Jiang, Andong Wang, Ya** Cheng, Yao Sun, Jie Pang, Qi Hua, Liangjian Wen, Liang Zhan, Yu-Feng Li

Abstract: Geoneutrinos serve as a potent tool for comprehending the radiogenic power and composition of Earth. Although geoneutrinos have been observed in prior experiments, the forthcoming generation of experiments,such as JUNO, will be necessary for fully harnessing their potential. Precise prediction of the crustal contribution is vital for interpreting particlephysics measurements in the context of geo-… ▽ More Geoneutrinos serve as a potent tool for comprehending the radiogenic power and composition of Earth. Although geoneutrinos have been observed in prior experiments, the forthcoming generation of experiments,such as JUNO, will be necessary for fully harnessing their potential. Precise prediction of the crustal contribution is vital for interpreting particlephysics measurements in the context of geo-scientific inquiries. Nonetheless, existing models such as JULOC and GIGJ have limitations in accurately forecasting the crustal contribution. This paper introduces JULOCI, the novel 3-D integrated crustal model of JUNO, which employs seismic, gravity, rock sample, and heat flow data to precisely estimate the geoneutrino signal of the lithosphere. The model indicates elevated concentrations of uranium and thorium in southern China, resulting in unexpectedly strong geoneutrino signals.The accuracy of JULOC-I, coupled with a decade of experimental data, affords JUNO the opportunity to test multiple mantle models. Once operational, JUNO can validate the model predictions and enhance the precision of mantle measurements. All in all, the improved accuracy ofJULOC-I represents a substantial stride towards comprehending the geochemical distribution of the South China crust, offering a valuable tool for investigating the composition and evolution of the Earth through geoneutrinos. △ Less

Submitted 6 March, 2024; v1 submitted 17 October, 2022; originally announced October 2022.

Comments: Substantial updates on the model and predictions, submitted version

Prospects for Detecting the Diffuse Supernova Neutrino Background with JUNO

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli, Thilo Birkenfeld, Sylvie Blin , et al. (577 additional authors not shown)

Abstract: We present the detection potential for the diffuse supernova neutrino background (DSNB) at the Jiangmen Underground Neutrino Observatory (JUNO), using the inverse-beta-decay (IBD) detection channel on free protons. We employ the latest information on the DSNB flux predictions, and investigate in detail the background and its reduction for the DSNB search at JUNO. The atmospheric neutrino induced n… ▽ More We present the detection potential for the diffuse supernova neutrino background (DSNB) at the Jiangmen Underground Neutrino Observatory (JUNO), using the inverse-beta-decay (IBD) detection channel on free protons. We employ the latest information on the DSNB flux predictions, and investigate in detail the background and its reduction for the DSNB search at JUNO. The atmospheric neutrino induced neutral current (NC) background turns out to be the most critical background, whose uncertainty is carefully evaluated from both the spread of model predictions and an envisaged \textit{in situ} measurement. We also make a careful study on the background suppression with the pulse shape discrimination (PSD) and triple coincidence (TC) cuts. With latest DSNB signal predictions, more realistic background evaluation and PSD efficiency optimization, and additional TC cut, JUNO can reach the significance of 3$σ$ for 3 years of data taking, and achieve better than 5$σ$ after 10 years for a reference DSNB model. In the pessimistic scenario of non-observation, JUNO would strongly improve the limits and exclude a significant region of the model parameter space. △ Less

Submitted 13 October, 2022; v1 submitted 18 May, 2022; originally announced May 2022.

Comments: 29 pages, 11 figures, final published version in JCAP

Journal ref: JCAP 10 (2022) 033

Mass Testing and Characterization of 20-inch PMTs for JUNO

Authors: Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, Joao Pedro Athayde Marcondes de Andre, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli , et al. (541 additional authors not shown)

Abstract: Main goal of the JUNO experiment is to determine the neutrino mass ordering using a 20kt liquid-scintillator detector. Its key feature is an excellent energy resolution of at least 3 % at 1 MeV, for which its instruments need to meet a certain quality and thus have to be fully characterized. More than 20,000 20-inch PMTs have been received and assessed by JUNO after a detailed testing program whic… ▽ More Main goal of the JUNO experiment is to determine the neutrino mass ordering using a 20kt liquid-scintillator detector. Its key feature is an excellent energy resolution of at least 3 % at 1 MeV, for which its instruments need to meet a certain quality and thus have to be fully characterized. More than 20,000 20-inch PMTs have been received and assessed by JUNO after a detailed testing program which began in 2017 and elapsed for about four years. Based on this mass characterization and a set of specific requirements, a good quality of all accepted PMTs could be ascertained. This paper presents the performed testing procedure with the designed testing systems as well as the statistical characteristics of all 20-inch PMTs intended to be used in the JUNO experiment, covering more than fifteen performance parameters including the photocathode uniformity. This constitutes the largest sample of 20-inch PMTs ever produced and studied in detail to date, i.e. 15,000 of the newly developed 20-inch MCP-PMTs from Northern Night Vision Technology Co. (NNVT) and 5,000 of dynode PMTs from Hamamatsu Photonics K. K.(HPK). △ Less

Submitted 17 September, 2022; v1 submitted 17 May, 2022; originally announced May 2022.

Radioactivity control strategy for the JUNO detector

Authors: JUNO collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli, Thilo Birkenfeld, Sylvie Blin , et al. (578 additional authors not shown)

Abstract: JUNO is a massive liquid scintillator detector with a primary scientific goal of determining the neutrino mass ordering by studying the oscillated anti-neutrino flux coming from two nuclear power plants at 53 km distance. The expected signal anti-neutrino interaction rate is only 60 counts per day, therefore a careful control of the background sources due to radioactivity is critical. In particula… ▽ More JUNO is a massive liquid scintillator detector with a primary scientific goal of determining the neutrino mass ordering by studying the oscillated anti-neutrino flux coming from two nuclear power plants at 53 km distance. The expected signal anti-neutrino interaction rate is only 60 counts per day, therefore a careful control of the background sources due to radioactivity is critical. In particular, natural radioactivity present in all materials and in the environment represents a serious issue that could impair the sensitivity of the experiment if appropriate countermeasures were not foreseen. In this paper we discuss the background reduction strategies undertaken by the JUNO collaboration to reduce at minimum the impact of natural radioactivity. We describe our efforts for an optimized experimental design, a careful material screening and accurate detector production handling, and a constant control of the expected results through a meticulous Monte Carlo simulation program. We show that all these actions should allow us to keep the background count rate safely below the target value of 10 Hz in the default fiducial volume, above an energy threshold of 0.7 MeV. △ Less

Submitted 13 October, 2021; v1 submitted 8 July, 2021; originally announced July 2021.

Comments: 35 pages, 12 figures

Attention-Based 3D Seismic Fault Segmentation Training by a Few 2D Slice Labels

Authors: YiMin Dou, Kewen Li, Jianbing Zhu, Xiao Li, Yingjie Xi

Abstract: Detection faults in seismic data is a crucial step for seismic structural interpretation, reservoir characterization and well placement. Some recent works regard it as an image segmentation task. The task of image segmentation requires huge labels, especially 3D seismic data, which has a complex structure and lots of noise. Therefore, its annotation requires expert experience and a huge workload.… ▽ More Detection faults in seismic data is a crucial step for seismic structural interpretation, reservoir characterization and well placement. Some recent works regard it as an image segmentation task. The task of image segmentation requires huge labels, especially 3D seismic data, which has a complex structure and lots of noise. Therefore, its annotation requires expert experience and a huge workload. In this study, we present lambda-BCE and lambda-smooth L1loss to effectively train 3D-CNN by some slices from 3D seismic data, so that the model can learn the segmentation of 3D seismic data from a few 2D slices. In order to fully extract information from limited data and suppress seismic noise, we propose an attention module that can be used for active supervision training and embedded in the network. The attention heatmap label is generated by the original label, and letting it supervise the attention module using the lambda-smooth L1loss. The experiment demonstrates the effectiveness of our loss function, the method can extract 3D seismic features from a few 2D slice labels. And it also shows the advanced performance of the attention module, which can significantly suppress the noise in the seismic data while increasing the model's sensitivity to the foreground. Finally, on the public test set, we only use the 2D slice labels training that accounts for 3.3% of the 3D volume label, and achieve similar performance to the 3D volume label training. △ Less

Submitted 9 September, 2021; v1 submitted 9 May, 2021; originally announced May 2021.

Comments: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

The Design and Sensitivity of JUNO's scintillator radiopurity pre-detector OSIRIS

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Guangpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli, Thilo Birkenfeld , et al. (582 additional authors not shown)

Abstract: The OSIRIS detector is a subsystem of the liquid scintillator fillling chain of the JUNO reactor neutrino experiment. Its purpose is to validate the radiopurity of the scintillator to assure that all components of the JUNO scintillator system work to specifications and only neutrino-grade scintillator is filled into the JUNO Central Detector. The aspired sensitivity level of $10^{-16}$ g/g of… ▽ More The OSIRIS detector is a subsystem of the liquid scintillator fillling chain of the JUNO reactor neutrino experiment. Its purpose is to validate the radiopurity of the scintillator to assure that all components of the JUNO scintillator system work to specifications and only neutrino-grade scintillator is filled into the JUNO Central Detector. The aspired sensitivity level of $10^{-16}$ g/g of $^{238}$U and $^{232}$Th requires a large ($\sim$20 m$^3$) detection volume and ultralow background levels. The present paper reports on the design and major components of the OSIRIS detector, the detector simulation as well as the measuring strategies foreseen and the sensitivity levels to U/Th that can be reached in this setup. △ Less

Submitted 31 March, 2021; originally announced March 2021.

Comments: 32 pages, 22 figures

Receptivity and stability of hypersonic leading-edge sweep flows around a blunt body

Authors: Youcheng Xi, Jie Ren, Liang Wang, Song Fu

Abstract: This study performs global stability/receptivity analyses of hypersonic sweep flows around a blunt body with an infinite span. For the first time, we obtain the characteristics of the leading attachment-line mode to the variation of sweep angles from 20 to 70 degrees. The global eigenfunctions exhibit the characteristics of the attachment-line instability at the leading edge. At the same time, cro… ▽ More This study performs global stability/receptivity analyses of hypersonic sweep flows around a blunt body with an infinite span. For the first time, we obtain the characteristics of the leading attachment-line mode to the variation of sweep angles from 20 to 70 degrees. The global eigenfunctions exhibit the characteristics of the attachment-line instability at the leading edge. At the same time, cross-flow (at small sweep angles) or second Mack mode (at larger sweep angles) dominates further downstream. We establish an adjoint-based bi-orthogonal eigenfunction system to address the receptivity problem of such flows to any external forces and boundary perturbations. The receptivity analyses indicate that the global modes are the most responsive to external forces and surface perturbations applied in the vicinity of the attachment line, regardless of the sweep angles. It is also proved that the present global extension of the bi-orthogonal eigenfunction system can be successfully applied to complex flows. △ Less

Submitted 3 December, 2020; originally announced December 2020.

Comments: 10 pages, 4 figures

Calibration Strategy of the JUNO Experiment

Authors: JUNO collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Guangpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Eric Baussan, Marco Bellato, Antonio Bergnoli, Enrico Bernieri, Thilo Birkenfeld , et al. (571 additional authors not shown)

Abstract: We present the calibration strategy for the 20 kton liquid scintillator central detector of the Jiangmen Underground Neutrino Observatory (JUNO). By utilizing a comprehensive multiple-source and multiple-positional calibration program, in combination with a novel dual calorimetry technique exploiting two independent photosensors and readout systems, we demonstrate that the JUNO central detector ca… ▽ More We present the calibration strategy for the 20 kton liquid scintillator central detector of the Jiangmen Underground Neutrino Observatory (JUNO). By utilizing a comprehensive multiple-source and multiple-positional calibration program, in combination with a novel dual calorimetry technique exploiting two independent photosensors and readout systems, we demonstrate that the JUNO central detector can achieve a better than 1% energy linearity and a 3% effective energy resolution, required by the neutrino mass ordering determination. △ Less

Submitted 20 January, 2021; v1 submitted 12 November, 2020; originally announced November 2020.

Optimization of the JUNO liquid scintillator composition using a Daya Bay antineutrino detector

Authors: Daya Bay, JUNO collaborations, :, A. Abusleme, T. Adam, S. Ahmad, S. Aiello, M. Akram, N. Ali, F. P. An, G. P. An, Q. An, G. Andronico, N. Anfimov, V. Antonelli, T. Antoshkina, B. Asavapibhop, J. P. A. M. de André, A. Babic, A. B. Balantekin, W. Baldini, M. Baldoncini, H. R. Band, A. Barresi, E. Baussan , et al. (642 additional authors not shown)

Abstract: To maximize the light yield of the liquid scintillator (LS) for the Jiangmen Underground Neutrino Observatory (JUNO), a 20 t LS sample was produced in a pilot plant at Daya Bay. The optical properties of the new LS in various compositions were studied by replacing the gadolinium-loaded LS in one antineutrino detector. The concentrations of the fluor, PPO, and the wavelength shifter, bis-MSB, were… ▽ More To maximize the light yield of the liquid scintillator (LS) for the Jiangmen Underground Neutrino Observatory (JUNO), a 20 t LS sample was produced in a pilot plant at Daya Bay. The optical properties of the new LS in various compositions were studied by replacing the gadolinium-loaded LS in one antineutrino detector. The concentrations of the fluor, PPO, and the wavelength shifter, bis-MSB, were increased in 12 steps from 0.5 g/L and <0.01 mg/L to 4 g/L and 13 mg/L, respectively. The numbers of total detected photoelectrons suggest that, with the optically purified solvent, the bis-MSB concentration does not need to be more than 4 mg/L. To bridge the one order of magnitude in the detector size difference between Daya Bay and JUNO, the Daya Bay data were used to tune the parameters of a newly developed optical model. Then, the model and tuned parameters were used in the JUNO simulation. This enabled to determine the optimal composition for the JUNO LS: purified solvent LAB with 2.5 g/L PPO, and 1 to 4 mg/L bis-MSB. △ Less

Submitted 1 July, 2020; originally announced July 2020.

Comments: 13 pages, 8 figures

Feasibility and physics potential of detecting $^8$B solar neutrinos at JUNO

Authors: JUNO collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Sebastiano Aiello, Muhammad Akram, Nawab Ali, Fengpeng An, Guangpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Eric Baussan, Marco Bellato, Antonio Bergnoli, Enrico Bernieri, David Biare , et al. (572 additional authors not shown)

Abstract: The Jiangmen Underground Neutrino Observatory~(JUNO) features a 20~kt multi-purpose underground liquid scintillator sphere as its main detector. Some of JUNO's features make it an excellent experiment for $^8$B solar neutrino measurements, such as its low-energy threshold, its high energy resolution compared to water Cherenkov detectors, and its much large target mass compared to previous liquid s… ▽ More The Jiangmen Underground Neutrino Observatory~(JUNO) features a 20~kt multi-purpose underground liquid scintillator sphere as its main detector. Some of JUNO's features make it an excellent experiment for $^8$B solar neutrino measurements, such as its low-energy threshold, its high energy resolution compared to water Cherenkov detectors, and its much large target mass compared to previous liquid scintillator detectors. In this paper we present a comprehensive assessment of JUNO's potential for detecting $^8$B solar neutrinos via the neutrino-electron elastic scattering process. A reduced 2~MeV threshold on the recoil electron energy is found to be achievable assuming the intrinsic radioactive background $^{238}$U and $^{232}$Th in the liquid scintillator can be controlled to 10$^{-17}$~g/g. With ten years of data taking, about 60,000 signal and 30,000 background events are expected. This large sample will enable an examination of the distortion of the recoil electron spectrum that is dominated by the neutrino flavor transformation in the dense solar matter, which will shed new light on the tension between the measured electron spectra and the predictions of the standard three-flavor neutrino oscillation framework. If $Δm^{2}_{21}=4.8\times10^{-5}~(7.5\times10^{-5})$~eV$^{2}$, JUNO can provide evidence of neutrino oscillation in the Earth at the about 3$σ$~(2$σ$) level by measuring the non-zero signal rate variation with respect to the solar zenith angle. Moveover, JUNO can simultaneously measure $Δm^2_{21}$ using $^8$B solar neutrinos to a precision of 20\% or better depending on the central value and to sub-percent precision using reactor antineutrinos. A comparison of these two measurements from the same detector will help elucidate the current tension between the value of $Δm^2_{21}$ reported by solar neutrino experiments and the KamLAND experiment. △ Less

Submitted 21 June, 2020; originally announced June 2020.

Comments: 29 pages, 14 plots, 7 tables

Hypersonic attachment-line instabilities with large sweep Mach numbers

Authors: Youcheng Xi, Jie Ren, Song Fu

Abstract: This study aims to shed light on hypersonic attachment-line instabilities with large sweep Mach numbers. Highly swept flows over a cold cylinder that give rise to large sweep Mach numbers are studied. High fidelity base flows are obtained by solving full Navier-Stokes equations with a high-order shock-fitting method. Using local and global stability theories, an attachment-line mode is found to be… ▽ More This study aims to shed light on hypersonic attachment-line instabilities with large sweep Mach numbers. Highly swept flows over a cold cylinder that give rise to large sweep Mach numbers are studied. High fidelity base flows are obtained by solving full Navier-Stokes equations with a high-order shock-fitting method. Using local and global stability theories, an attachment-line mode is found to be dominant for the laminar-turbulent transition along the leading edge that agrees well with experimental observations Gaillard1999. The behavior of this mode explains the reason why the transition occurs earlier as the sweep Mach number is above 5. Also, this attachment-line mode is absent if the base flow is calculated with boundary-layer assumptions, indicating that the influence of inviscid flow outside the boundary layer can not be ignored as is normally done. It is clearly demonstrated that the global modes display the features of both attachment-line modes, as in sweep Hiemenz flow, and cross-flow-like modes further downstream along the surface. In contrast to incompressible flows, the mode is shown to be of inviscid nature. Moreover, the leading-edge curvature has a destabilizing effect on the attachment-line mode for large spanwise wave numbers but a stabilizing effect for small spanwise wave numbers. △ Less

Submitted 10 June, 2020; originally announced June 2020.

Comments: 26 pages, 23 figures

Journal ref: J. Fluid Mech. 915 (2021) A44

TAO Conceptual Design Report: A Precision Measurement of the Reactor Antineutrino Spectrum with Sub-percent Energy Resolution

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Sebastiano Aiello, Muhammad Akram, Nawab Ali, Fengpeng An, Guangpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Eric Baussan, Marco Bellato, Antonio Bergnoli, Enrico Bernieri, David Biare , et al. (568 additional authors not shown)

Abstract: The Taishan Antineutrino Observatory (TAO, also known as JUNO-TAO) is a satellite experiment of the Jiangmen Underground Neutrino Observatory (JUNO). A ton-level liquid scintillator detector will be placed at about 30 m from a core of the Taishan Nuclear Power Plant. The reactor antineutrino spectrum will be measured with sub-percent energy resolution, to provide a reference spectrum for future re… ▽ More The Taishan Antineutrino Observatory (TAO, also known as JUNO-TAO) is a satellite experiment of the Jiangmen Underground Neutrino Observatory (JUNO). A ton-level liquid scintillator detector will be placed at about 30 m from a core of the Taishan Nuclear Power Plant. The reactor antineutrino spectrum will be measured with sub-percent energy resolution, to provide a reference spectrum for future reactor neutrino experiments, and to provide a benchmark measurement to test nuclear databases. A spherical acrylic vessel containing 2.8 ton gadolinium-doped liquid scintillator will be viewed by 10 m^2 Silicon Photomultipliers (SiPMs) of >50% photon detection efficiency with almost full coverage. The photoelectron yield is about 4500 per MeV, an order higher than any existing large-scale liquid scintillator detectors. The detector operates at -50 degree C to lower the dark noise of SiPMs to an acceptable level. The detector will measure about 2000 reactor antineutrinos per day, and is designed to be well shielded from cosmogenic backgrounds and ambient radioactivities to have about 10% background-to-signal ratio. The experiment is expected to start operation in 2022. △ Less

Submitted 18 May, 2020; originally announced May 2020.

Comments: 134 pages, 114 figures

The computation of seismic normal modes with rotation as a quadratic eigenvalue problem

Authors: Jia Shi, Ruipeng Li, Yuanzhe Xi, Yousef Saad, Maarten V. de Hoop

Abstract: A new approach is presented to compute the seismic normal modes of a fully heterogeneous, rotating planet. Special care is taken to separate out the essential spectrum in the presence of a fluid outer core. The relevant elastic-gravitational system of equations, including the Coriolis force, is subjected to a mixed finite-element method, while self-gravitation is accounted for with the fast multip… ▽ More A new approach is presented to compute the seismic normal modes of a fully heterogeneous, rotating planet. Special care is taken to separate out the essential spectrum in the presence of a fluid outer core. The relevant elastic-gravitational system of equations, including the Coriolis force, is subjected to a mixed finite-element method, while self-gravitation is accounted for with the fast multipole method (FMM). To solve the resulting quadratic eigenvalue problem (QEP), the approach utilizes extended Lanczos vectors forming a subspace computed from a non-rotating planet -- with the shape of boundaries of a rotating planet and accounting for the centrifugal potential -- to reduce the dimension of the original problem significantly. The subspace is guaranteed to be contained in the space of functions to which the seismic normal modes belong. The reduced system can further be solved with a standard eigensolver. The computational accuracy is illustrated using all the modes with relative small meshes and also tested against standard perturbation calculations relative to a standard Earth model. The algorithm and code are used to compute the point spectra of eigenfrequencies in several Mars models studying the effects of heterogeneity on a large range of scales. △ Less

Submitted 25 September, 2021; v1 submitted 29 November, 2019; originally announced December 2019.

Comments: It was merged with another paper, arXiv:1906.11082

Plasma-photonic spatiotemporal synchronization of relativistic electron and laser beams

Authors: Paul Scherkl, Alexander Knetsch, Thomas Heinemann, Andrew Sutherland, Ahmad Fahim Habib, Oliver Karger, Daniel Ullmann, Andrew Beaton, Gavin Kirwan, Grace Manahan, Yunfeng Xi, Aihua Deng, Michael Dennis Litos, Brendan D. OShea, Selina Z. Green, Christine I. Clarke, Gerard Andonian, Ralph Assmann, Dino A. Jaroszynski, David L. Bruhwiler, Jonathan Smith, John R. Cary, Mark J. Hogan, Vitaly Yakimenko, James B. Rosenzweig , et al. (1 additional authors not shown)

Abstract: Modern particle accelerators and their applications increasingly rely on precisely coordinated interactions of intense charged particle and laser beams. Femtosecond-scale synchronization alongside micrometre-scale spatial precision are essential e.g. for pump-probe experiments, seeding and diagnostics of advanced light sources and for plasma-based accelerators. State-of-the-art temporal or spatial… ▽ More Modern particle accelerators and their applications increasingly rely on precisely coordinated interactions of intense charged particle and laser beams. Femtosecond-scale synchronization alongside micrometre-scale spatial precision are essential e.g. for pump-probe experiments, seeding and diagnostics of advanced light sources and for plasma-based accelerators. State-of-the-art temporal or spatial diagnostics typically operate with low-intensity beams to avoid material damage at high intensity. As such, we present a plasma-based approach, which allows measurement of both temporal and spatial overlap of high-intensity beams directly at their interaction point. It exploits amplification of plasma afterglow arising from the passage of an electron beam through a laser-generated plasma filament. The corresponding photon yield carries the spatiotemporal signature of the femtosecond-scale dynamics, yet can be observed as a visible light signal on microsecond-millimetre scales. △ Less

Submitted 25 August, 2019; originally announced August 2019.

Electron bunch generation from a plasma photocathode

Authors: Aihua Deng, Oliver Karger, Thomas Heinemann, Alexander Knetsch, Paul Scherkl, Grace Gloria Manahan, Andrew Beaton, Daniel Ullmann, Gregor Wittig, Ahmad Fahim Habib, Yunfeng Xi, Mike Dennis Litos, Brendan D. O'Shea, Spencer Gessner, Christine I. Clarke, Selina Z. Green, Carl Andreas Lindstrøm, Erik Adli, Rafal Zgadzaj, Mike C. Downer, Gerard Andonian, Alex Murokh, David Leslie Bruhwiler, John R. Cary, Mark J. Hogan , et al. (3 additional authors not shown)

Abstract: Plasma waves generated in the wake of intense, relativistic laser or particle beams can accelerate electron bunches to giga-electronvolt (GeV) energies in centimetre-scale distances. This allows the realization of compact accelerators having emerging applications, ranging from modern light sources such as the free-electron laser (FEL) to energy frontier lepton colliders. In a plasma wakefield acce… ▽ More Plasma waves generated in the wake of intense, relativistic laser or particle beams can accelerate electron bunches to giga-electronvolt (GeV) energies in centimetre-scale distances. This allows the realization of compact accelerators having emerging applications, ranging from modern light sources such as the free-electron laser (FEL) to energy frontier lepton colliders. In a plasma wakefield accelerator, such multi-gigavolt-per-metre (GV m$^{-1}$) wakefields can accelerate witness electron bunches that are either externally injected or captured from the background plasma. Here we demonstrate optically triggered injection and acceleration of electron bunches, generated in a multi-component hydrogen and helium plasma employing a spatially aligned and synchronized laser pulse. This ''plasma photocathode'' decouples injection from wake excitation by liberating tunnel-ionized helium electrons directly inside the plasma cavity, where these cold electrons are then rapidly boosted to relativistic velocities. The injection regime can be accessed via optical density down-ramp injection, is highly tunable and paves the way to generation of electron beams with unprecedented low transverse emittance, high current and 6D-brightness. This experimental path opens numerous prospects for transformative plasma wakefield accelerator applications based on ultra-high brightness beams. △ Less

Submitted 1 July, 2019; originally announced July 2019.

Comments: Alternative title: Generation and acceleration of electron bunches from a plasma photocathode

A non-perturbative approach to computing seismic normal modes in rotating planets

Authors: Jia Shi, Ruipeng Li, Yuanzhe Xi, Yousef Saad, Maarten V. de Hoop

Abstract: A Continuous Galerkin method-based approach is presented to compute the seismic normal modes of rotating planets. Special care is taken to separate out the essential spectrum in the presence of a fluid outer core using a polynomial filtering eigensolver. The relevant elastic-gravitational system of equations, including the Coriolis force, is subjected to a mixed finite-element method, while self-g… ▽ More A Continuous Galerkin method-based approach is presented to compute the seismic normal modes of rotating planets. Special care is taken to separate out the essential spectrum in the presence of a fluid outer core using a polynomial filtering eigensolver. The relevant elastic-gravitational system of equations, including the Coriolis force, is subjected to a mixed finite-element method, while self-gravitation is accounted for with the fast multipole method. Our discretization utilizes fully unstructured tetrahedral meshes for both solid and fluid regions. The relevant eigenvalue problem is solved by a combination of several highly parallel and computationally efficient methods. We validate our three-dimensional results in the non-rotating case using analytical results for constant elastic balls, as well as numerical results for an isotropic Earth model from standard ``radial" algorithms. We also validate the computations in the rotating case, but only in the slowly-rotating regime where perturbation theory applies, because no other independent algorithms are available in the general case. The algorithm and code are used to compute the point spectra of eigenfrequencies in several Earth and Mars models studying the effects of heterogeneity on a large range of scales. △ Less

Submitted 25 September, 2021; v1 submitted 25 June, 2019; originally announced June 2019.

MSC Class: 86-08; 86-04; 85-04; 85-08; 85-10; 15A18; 65N25; 65N30

JULOC: A Local 3-D Refined Crust Model for the Geoneutrino Measurement at JUNO

Authors: Ruohan Gao, Zhiwei Li, Ran Han, Andong Wang, Yu-Feng Li, Yufei Xi, **gao Liu, Xin Mao, Yao Sun, Ya Xu

Abstract: Geothermal energy is the key to drive the plate tectonics and interior thermodynamics of the Earth. The surface heat flux, as measured in boreholes, provide limited insights into the relative contributions of primordial versus radiogenic sources of the heat budget of the mantle. Geoneutrinos, electron antineutrinos that produced from the radioactive decay of the heat producing elements, are unique… ▽ More Geothermal energy is the key to drive the plate tectonics and interior thermodynamics of the Earth. The surface heat flux, as measured in boreholes, provide limited insights into the relative contributions of primordial versus radiogenic sources of the heat budget of the mantle. Geoneutrinos, electron antineutrinos that produced from the radioactive decay of the heat producing elements, are unique probes that bring direct information about the amount and distribution of heat producing elements in the crust and mantle. Cosmochemical, geochemical, and geodynamic compositional models of the Bulk Silicate Earth (BSE) individually predicts different mantle neutrino fluxes, and therefore can be distinguished by the direct measurement of geoneutrinos. The 20 kton detector of the Jiangmen Underground Neutrino Observatory (JUNO), currently under construction in the Guangdong Province (China), is expected to provide an exciting opportunity to obtain a high statistics measurement, which will produce sufficient data to address several key questions of geological importance. To test different compositional models of the mantle, an accurate estimation of the crust geoneutrino flux based on a three-dimensional (3-D) crust model in advance is important. This paper presents a 3-D crust model over a surface area of 10-degrees-times-10-degrees grid surrounding the JUNO detector and a depth down to the Moho discontinuity, based on the geological, geophysical and geochemistry properties. The 3-D model provides a distinction of the volumes of the different geological layers together with the corresponding Th and U abundances. We also present our predicted local contribution to the total geoneutrino flux and the corresponding radiogenic heat. △ Less

Submitted 6 January, 2020; v1 submitted 28 March, 2019; originally announced March 2019.

Comments: 43 pages, 14 figures, with 8 figures in the Appendix, final version published in Physics of The Earth and Planetary Interiors

Convolutional Sparse Coding for Compressed Sensing CT Reconstruction

Authors: Peng Bao, Wenjun Xia, Kang Yang, Weiyan Chen, Mianyi Chen, Yan Xi, Shanzhou Niu, Jiliu Zhou, He Zhang, Huaiqiang Sun, Zhangyang Wang, Yi Zhang

Abstract: Over the past few years, dictionary learning (DL)-based methods have been successfully used in various image reconstruction problems. However, traditional DL-based computed tomography (CT) reconstruction methods are patch-based and ignore the consistency of pixels in overlapped patches. In addition, the features learned by these methods always contain shifted versions of the same features. In rece… ▽ More Over the past few years, dictionary learning (DL)-based methods have been successfully used in various image reconstruction problems. However, traditional DL-based computed tomography (CT) reconstruction methods are patch-based and ignore the consistency of pixels in overlapped patches. In addition, the features learned by these methods always contain shifted versions of the same features. In recent years, convolutional sparse coding (CSC) has been developed to address these problems. In this paper, inspired by several successful applications of CSC in the field of signal processing, we explore the potential of CSC in sparse-view CT reconstruction. By directly working on the whole image, without the necessity of dividing the image into overlapped patches in DL-based methods, the proposed methods can maintain more details and avoid artifacts caused by patch aggregation. With predetermined filters, an alternating scheme is developed to optimize the objective function. Extensive experiments with simulated and real CT data were performed to validate the effectiveness of the proposed methods. Qualitative and quantitative results demonstrate that the proposed methods achieve better performance than several existing state-of-the-art methods. △ Less

Submitted 20 March, 2019; originally announced March 2019.

Comments: Accepted by IEEE TMI

Boron-10 conversion layer for ultra-cold neutron detection

Authors: Benoit Clement, Alexandre Bes, Ana Lacoste, Rodolphe Combe, Valery V. Nesvizhevsky, Guillaume Pignol, Dominique Rebreyend, Yinghao Xi

Abstract: We report on the development of a 10B conversion layer optimized for ultra-cold neutron detection with silicon detectors. The efficiency of this layer is high and roughly uniform over a large ultra-cold neutron velocity range. The designed titanium-boron-nickel multilayer film was deposited on silicon using a microwave plasma-assisted co-sputtering method (first, for test purpose, on silicon wafer… ▽ More We report on the development of a 10B conversion layer optimized for ultra-cold neutron detection with silicon detectors. The efficiency of this layer is high and roughly uniform over a large ultra-cold neutron velocity range. The designed titanium-boron-nickel multilayer film was deposited on silicon using a microwave plasma-assisted co-sputtering method (first, for test purpose, on silicon wafers, then directly on the surface of a CCD sensor). The obtained sensor was then tested using both cold and ultra-cold neutrons. △ Less

Submitted 14 June, 2019; v1 submitted 25 February, 2019; originally announced February 2019.

Comments: 12 pages

The new mode of instability in viscous high-speed boundary layer flows

Authors: Jie Ren, Youcheng Xi, Song Fu

Abstract: The new mode of instability found by Tunney et al. is studied with viscous stability theory in this article. When the high-speed boundary layer is subject to certain values of favorable pressure gradient and wall heating, a new mode becomes unstable due to the appearance of the streamwise velocity overshoot ($U(y)>U_\infty$) in the base flow. The present study shows that under practical Reynolds n… ▽ More The new mode of instability found by Tunney et al. is studied with viscous stability theory in this article. When the high-speed boundary layer is subject to certain values of favorable pressure gradient and wall heating, a new mode becomes unstable due to the appearance of the streamwise velocity overshoot ($U(y)>U_\infty$) in the base flow. The present study shows that under practical Reynolds numbers, the new mode can hardly co-exist with conventional first mode and Mack's second mode. Due to the requirement for additional wall heating, the new mode may only lead to laminar-turbulent transition under experimental (artificial) conditions. △ Less

Submitted 6 August, 2018; originally announced August 2018.

Comments: 12 pages, 6 figures, published at http://www.global-sci.org/intro/article_detail.html?journal=aamm&article_id=12587

Journal ref: Advances in Applied Mathematics and Mechanics Vol. 10, No. 5, pp. 1057-1068, 2018

Projection Decomposition for Dual-energy Computed Tomography

Authors: Wenxiang Cong, Daniel Harrison, Yan Xi, Ge Wang

Abstract: Dual-energy computed tomography (CT) is to reconstruct images of an object from two projection datasets generated from two distinct x-ray source energy spectra. It can provide more accurate attenuation quantification than conventional CT with a single x-ray energy spectrum. In the diagnostic energy range, x-ray energy-dependent attenuation can be approximated as a linear combination of photoelectr… ▽ More Dual-energy computed tomography (CT) is to reconstruct images of an object from two projection datasets generated from two distinct x-ray source energy spectra. It can provide more accurate attenuation quantification than conventional CT with a single x-ray energy spectrum. In the diagnostic energy range, x-ray energy-dependent attenuation can be approximated as a linear combination of photoelectric absorption and Compton scattering. Hence, two physical components of x-ray attenuation can be determined from two spectral informative projection datasets to achieve monochromatic imaging and material decomposition. In this paper, a projection decomposition method is proposed for the image reconstruction in dual-energy CT. This method combines both an analytical algorithm and a single-variable optimization method to solve the non-linear polychromatic x-ray integral model, allowing accurate quantification of photoelectric absorption and Compton scattering components. Numerical tests are performed to illustrate the merit of the proposed method by comparing with classical projection decomposition methods. △ Less

Submitted 14 May, 2018; originally announced May 2018.

C2D8: An eight channel CCD readout electronics dedicated to low energy neutron detection

Authors: O. Bourrion, B. Clement, D. Tourres, G. Pignol, Y. Xi, D. Rebreyend, V. V. Nesvizhevsky

Abstract: Position-sensitive detectors for cold and ultra-cold neutrons (UCN) are in use in fundamental research. In particular, measuring the properties of the quantum states of bouncing neutrons requires micro-metric spatial resolution. To this end, a Charge Coupled Device (CCD) coated with a thin conversion layer that allows a real time detection of neutron hits is under development at LPSC. In this pape… ▽ More Position-sensitive detectors for cold and ultra-cold neutrons (UCN) are in use in fundamental research. In particular, measuring the properties of the quantum states of bouncing neutrons requires micro-metric spatial resolution. To this end, a Charge Coupled Device (CCD) coated with a thin conversion layer that allows a real time detection of neutron hits is under development at LPSC. In this paper, we present the design and performance of a dedicated electronic board designed to read-out eight CCDs simultaneously and operating under vacuum. △ Less

Submitted 24 October, 2017; originally announced October 2017.

Comments: 16 pages, 9 figures. Accepted for publication in NIM-A

Journal ref: Nucl. Instrum. Meth. A 880C (2018) 28-34

Letter of Intent: **** Neutrino Experiment

Authors: John F. Beacom, Shaomin Chen, Jian** Cheng, Sayed N. Doustimotlagh, Yuanning Gao, Shao-Feng Ge, Guanghua Gong, Hui Gong, Lei Guo, Ran Han, Xingtao Huang, Jianmin Li, ** Li, Mohan Li, Xueqian Li, Guey-Lin Lin, Zuowei Liu, William McDonough, Jian Tang, Linyan Wan, Yuanqing Wang, Zhe Wang, Zongyi Wang, Hanyu Wei, Yufei Xi , et al. (12 additional authors not shown)

Abstract: **** Neutrino Experiment (****) is proposed to significantly improve measurements on solar neutrinos and geoneutrinos in China **** Laboratory - a lab with a number of unparalleled features, thickest overburden, lowest reactor neutrino background, etc., which identify it as the world-best low-energy neutrino laboratory. The proposed experiment will have target mass of 4 kilotons of liquid… ▽ More **** Neutrino Experiment (****) is proposed to significantly improve measurements on solar neutrinos and geoneutrinos in China **** Laboratory - a lab with a number of unparalleled features, thickest overburden, lowest reactor neutrino background, etc., which identify it as the world-best low-energy neutrino laboratory. The proposed experiment will have target mass of 4 kilotons of liquid scintillator or water-based liquid scintillator, with a fiducial mass of 2 kilotons for neutrino-electron scattering events and 3 kilotons for inverse-beta interaction events. A number of initial sensitivities studies have been carried out, including on the transition phase for the solar neutrinos oscillation from the vacuum to the matter effect, the discovery of solar neutrinos from the carbon-nitrogen-oxygen (CNO) cycle, the resolution of the high and low metallicity hypotheses, and the unambiguous separation on U and Th cascade decays from the dominant crustal anti-electron neutrinos in China. △ Less

Submitted 21 June, 2016; v1 submitted 4 February, 2016; originally announced February 2016.

Comments: Proposal for the **** Neutrino Experiment

Journal ref: Chinese Physics C Vol. 41, No. 2 (2017) 023002

JUNO Conceptual Design Report

Authors: T. Adam, F. An, G. An, Q. An, N. Anfimov, V. Antonelli, G. Baccolo, M. Baldoncini, E. Baussan, M. Bellato, L. Bezrukov, D. Bick, S. Blyth, S. Boarin, A. Brigatti, T. Brugière, R. Brugnera, M. Buizza Avanzini, J. Busto, A. Cabrera, H. Cai, X. Cai, A. Cammi, D. Cao, G. Cao , et al. (372 additional authors not shown)

Abstract: The Jiangmen Underground Neutrino Observatory (JUNO) is proposed to determine the neutrino mass hierarchy using an underground liquid scintillator detector. It is located 53 km away from both Yangjiang and Taishan Nuclear Power Plants in Guangdong, China. The experimental hall, spanning more than 50 meters, is under a granite mountain of over 700 m overburden. Within six years of running, the dete… ▽ More The Jiangmen Underground Neutrino Observatory (JUNO) is proposed to determine the neutrino mass hierarchy using an underground liquid scintillator detector. It is located 53 km away from both Yangjiang and Taishan Nuclear Power Plants in Guangdong, China. The experimental hall, spanning more than 50 meters, is under a granite mountain of over 700 m overburden. Within six years of running, the detection of reactor antineutrinos can resolve the neutrino mass hierarchy at a confidence level of 3-4$σ$, and determine neutrino oscillation parameters $\sin^2θ_{12}$, $Δm^2_{21}$, and $|Δm^2_{ee}|$ to an accuracy of better than 1%. The JUNO detector can be also used to study terrestrial and extra-terrestrial neutrinos and new physics beyond the Standard Model. The central detector contains 20,000 tons liquid scintillator with an acrylic sphere of 35 m in diameter. $\sim$17,000 508-mm diameter PMTs with high quantum efficiency provide $\sim$75% optical coverage. The current choice of the liquid scintillator is: linear alkyl benzene (LAB) as the solvent, plus PPO as the scintillation fluor and a wavelength-shifter (Bis-MSB). The number of detected photoelectrons per MeV is larger than 1,100 and the energy resolution is expected to be 3% at 1 MeV. The calibration system is designed to deploy multiple sources to cover the entire energy range of reactor antineutrinos, and to achieve a full-volume position coverage inside the detector. The veto system is used for muon detection, muon induced background study and reduction. It consists of a Water Cherenkov detector and a Top Tracker system. The readout system, the detector control system and the offline system insure efficient and stable data acquisition and processing. △ Less

Submitted 28 September, 2015; v1 submitted 28 August, 2015; originally announced August 2015.

Comments: 328 pages, 211 figures

Neutrino Physics with JUNO

Authors: Fengpeng An, Guangpeng An, Qi An, Vito Antonelli, Eric Baussan, John Beacom, Leonid Bezrukov, Simon Blyth, Riccardo Brugnera, Margherita Buizza Avanzini, Jose Busto, Anatael Cabrera, Hao Cai, Xiao Cai, Antonio Cammi, Guofu Cao, Jun Cao, Yun Chang, Shaomin Chen, Shenjian Chen, Yixue Chen, Davide Chiesa, Massimiliano Clemenza, Barbara Clerbaux, Janet Conrad , et al. (203 additional authors not shown)

Abstract: The Jiangmen Underground Neutrino Observatory (JUNO), a 20 kton multi-purpose underground liquid scintillator detector, was proposed with the determination of the neutrino mass hierarchy as a primary physics goal. It is also capable of observing neutrinos from terrestrial and extra-terrestrial sources, including supernova burst neutrinos, diffuse supernova neutrino background, geoneutrinos, atmosp… ▽ More The Jiangmen Underground Neutrino Observatory (JUNO), a 20 kton multi-purpose underground liquid scintillator detector, was proposed with the determination of the neutrino mass hierarchy as a primary physics goal. It is also capable of observing neutrinos from terrestrial and extra-terrestrial sources, including supernova burst neutrinos, diffuse supernova neutrino background, geoneutrinos, atmospheric neutrinos, solar neutrinos, as well as exotic searches such as nucleon decays, dark matter, sterile neutrinos, etc. We present the physics motivations and the anticipated performance of the JUNO detector for various proposed measurements. By detecting reactor antineutrinos from two power plants at 53-km distance, JUNO will determine the neutrino mass hierarchy at a 3-4 sigma significance with six years of running. The measurement of antineutrino spectrum will also lead to the precise determination of three out of the six oscillation parameters to an accuracy of better than 1\%. Neutrino burst from a typical core-collapse supernova at 10 kpc would lead to ~5000 inverse-beta-decay events and ~2000 all-flavor neutrino-proton elastic scattering events in JUNO. Detection of DSNB would provide valuable information on the cosmic star-formation rate and the average core-collapsed neutrino energy spectrum. Geo-neutrinos can be detected in JUNO with a rate of ~400 events per year, significantly improving the statistics of existing geoneutrino samples. The JUNO detector is sensitive to several exotic searches, e.g. proton decay via the $p\to K^++\barν$ decay channel. The JUNO detector will provide a unique facility to address many outstanding crucial questions in particle and astrophysics. It holds the great potential for further advancing our quest to understanding the fundamental properties of neutrinos, one of the building blocks of our Universe. △ Less

Submitted 18 October, 2015; v1 submitted 20 July, 2015; originally announced July 2015.

Comments: Version submitted to Journal of Physics G, with minor typo corrections. 222 Pages, 147 figures

Journal ref: J. Phys. G 43 (2016) 030401

Thickness Measurements from Single X-ray Phase-contrast Speckle Projection

Authors: Yan Xi, Rongbiao Tang, **gchen Ma, Jun Zhao

Abstract: We propose a one-shot thickness measurement method for sponge-like structures using a propagation-based X-ray phase-contrast imaging (P-PCI) method. In P-PCI, the air-material interface refracts the incident X-ray. Refracted many times along their paths by such a structure, incident X-rays propagate randomly within a small divergent angle range, resulting in a speckle pattern in the captured image… ▽ More We propose a one-shot thickness measurement method for sponge-like structures using a propagation-based X-ray phase-contrast imaging (P-PCI) method. In P-PCI, the air-material interface refracts the incident X-ray. Refracted many times along their paths by such a structure, incident X-rays propagate randomly within a small divergent angle range, resulting in a speckle pattern in the captured image. We found structure thickness and contrast of a phase-contrast projection are directly related in images. This relationship can be described by a natural logarithm equation. Thus, from the one phase-contrast view, depth information can be retrieved from its contrast. Our preliminary biological experiments indicate promise in its application to measurements requiring in vivo and ongoing assessment of lung tumor progression. △ Less

Submitted 24 April, 2015; originally announced April 2015.

Theoretical analysis on x-ray cylindrical grating interferometer

Authors: Wenxiang Cong, Yan Xi, Ge Wang

Abstract: Grating interferometer is a state of art x-ray imaging approach, which can simultaneously acquire information of x-ray attenuation, phase shift, and small angle scattering. This approach is very sensitive to micro-structural variation and offers superior contrast resolution for biological soft tissues. The present grating interferometer often uses flat gratings, with serious limitations in the fie… ▽ More Grating interferometer is a state of art x-ray imaging approach, which can simultaneously acquire information of x-ray attenuation, phase shift, and small angle scattering. This approach is very sensitive to micro-structural variation and offers superior contrast resolution for biological soft tissues. The present grating interferometer often uses flat gratings, with serious limitations in the field of view and the flux of photons. The use of curved gratings allows perpendicular incidence of x-rays on the gratings, and gives higher visibility over a larger field of view than a conventional interferometer with flat gratings. In the study, we present a rigorous theoretical analysis of the self-imaging of curved transmission gratings based on Rayleigh-Sommerfeld diffraction. Numerical simulations have demonstrated the self-imaging phenomenon of cylindrical grating interferometer. The theoretical results are in agreement with the results of numerical simulations. △ Less

Submitted 17 September, 2015; v1 submitted 3 February, 2015; originally announced February 2015.

Downramp-assisted underdense photocathode electron bunch generation in plasma wakefield accelerators

Authors: Alexander Knetsch, Oliver Karger, Georg Wittig, Henning Groth, Yunfeng Xi, Aihua Deng, James Benjamin Rosenzweig, David Leslie Bruhwiler, Johnathan Smith, Dino Anthony Jaroszynski, Zheng-Ming Sheng, Grace Gloria Manahan, Guoxing Xia, Steven Jamison, Bernhard Hidding

Abstract: It is shown that the requirements for high quality electron bunch generation and trap** from an underdense photocathode in plasma wakefield accelerators can be substantially relaxed through localizing it on a plasma density downramp. This depresses the phase velocity of the accelerating electric field until the generated electrons are in phase, allowing for trap** in shallow trap** potential… ▽ More It is shown that the requirements for high quality electron bunch generation and trap** from an underdense photocathode in plasma wakefield accelerators can be substantially relaxed through localizing it on a plasma density downramp. This depresses the phase velocity of the accelerating electric field until the generated electrons are in phase, allowing for trap** in shallow trap** potentials. As a consequence the underdense photocathode technique is applicable by a much larger number of accelerator facilities. Furthermore, dark current generation is effectively suppressed. △ Less

Submitted 15 December, 2014; originally announced December 2014.

Comments: 4 pages, 3 figures

Tunable Electron Multibunch Production in Plasma Wakefield Accelerators

Authors: B. Hidding, O. Karger, G. Wittig, C. Aniculaesei, D. Jaroszynski, B. W. J. McNeil, L. T. Campbell, M. R. Islam, B. Ersfeld, Z. -M. Sheng, Y. Xi, A. Deng, J. B. Rosenzweig, G. Andonian, A. Murokh, M. J. Hogan, D. L. Bruhwiler, E. Cormier

Abstract: Synchronized, independently tunable and focused $μ$J-class laser pulses are used to release multiple electron populations via photo-ionization inside an electron-beam driven plasma wave. By varying the laser foci in the laboratory frame and the position of the underdense photocathodes in the co-moving frame, the delays between the produced bunches and their energies are adjusted. The resulting mul… ▽ More Synchronized, independently tunable and focused $μ$J-class laser pulses are used to release multiple electron populations via photo-ionization inside an electron-beam driven plasma wave. By varying the laser foci in the laboratory frame and the position of the underdense photocathodes in the co-moving frame, the delays between the produced bunches and their energies are adjusted. The resulting multibunches have ultra-high quality and brightness, allowing for hitherto impossible bunch configurations such as spatially overlap** bunch populations with strictly separated energies, which opens up a new regime for light sources such as free-electron-lasers. △ Less

Submitted 5 March, 2014; originally announced March 2014.

First Neutron Spectrometry Measurement at the HL-2A Tokamak

Authors: Yuan Xi, Zhang Xing, Xie Xufei, Chen Zhong**g, Peng Xingyu, Fan Tieshuan, Chen **xiang, Li Xiangqing, Yuan Guoliang, Yang **wei, Yang Qingwei

Abstract: A compact neutron spectrometer based on the liquid scintillator is presented for neutron energy spectrum measurements at the HL-2A tokamak. The spectrometer was well characterized and a fast digital pulse shape discrimination software was developed using the charge comparison method. A digitizer data acquisition system with a maximum frequency of 1 MHz can work under an environment with a high cou… ▽ More A compact neutron spectrometer based on the liquid scintillator is presented for neutron energy spectrum measurements at the HL-2A tokamak. The spectrometer was well characterized and a fast digital pulse shape discrimination software was developed using the charge comparison method. A digitizer data acquisition system with a maximum frequency of 1 MHz can work under an environment with a high count rate at HL-2A tokamak. Specific radiation and magnetic shielding for the spectrometer were designed for the neutron spectrum measurement at the HL-2A tokamak. For pulse height spectrum analysis, dedicated numerical simulation utilizing NUBEAM combined with GENESIS was performed to obtain the neutron energy spectrum. Subsequently, the transportation process from the plasma to the detector was evaluated with Monte Carlo calculations. The distorted neutron energy spectrum was folded with the response matrix of the liquid scintillation spectrometer, and good consistency was found between the simulated and measured pulse height spectra. This neutron spectrometer based on a digital acquisition system could be well adopted for the investigation of the auxiliary heating behavior and the fast-ion related phenomenon on different tokamak devices. △ Less

Submitted 17 June, 2013; v1 submitted 10 April, 2013; originally announced April 2013.

Comments: 17 pages,9 figures

Journal ref: Chinese Physics C, 2013

Hybrid density functional study of band alignment in ZnO/GaN and ZnO/(Ga1-xZnx)(N1-xOx)/GaN heterostructures

Authors: Zhenhai Wang, Mingwen Zhao, Xiaopeng Wang, Yan Xi, Xiujie He, Xiangdong Liu, Shishen Yan

Abstract: The band alignment in ZnO/GaN and related heterostructures are crucial for the uses in solar harvesting technology. Here, we report our density functional calculations of the band alignment and optical properties of ZnO/GaN and ZnO/(Ga1-xZnx)(N1-xOx)/GaN heterostructures using a Heyd-Scuseria-Ernzerhof (HSE) hybrid functional. We found that the conventional GGA functionals underestimate not only t… ▽ More The band alignment in ZnO/GaN and related heterostructures are crucial for the uses in solar harvesting technology. Here, we report our density functional calculations of the band alignment and optical properties of ZnO/GaN and ZnO/(Ga1-xZnx)(N1-xOx)/GaN heterostructures using a Heyd-Scuseria-Ernzerhof (HSE) hybrid functional. We found that the conventional GGA functionals underestimate not only the band gap but also the band offset of these heterostructures. Using the hybrid functional calculations, we show that the (Ga1-xZnx)(N1-xOx) solid solution has a direct band gap of about 2.608 eV, in good agreement with the experimental data. More importantly, this solid solution forms type-II band alignment with the host materials. A GaN/(Ga1-xZnx)(N1-xOx)/ZnO core-shell solar cell model is presented to improve the visible light adsorption ability and carrier collection efficiency. △ Less

Submitted 9 June, 2012; originally announced June 2012.