-
A Numerical Formulation for Simulating Free-Surface Hydrodynamics
Authors:
Thomas T. O'Shea,
Kyle A. Brucker,
Douglas G. Dommermuth,
Donald C. Wyatt
Abstract:
Cartesian-grid methods in combination with immersed-body and volume-of-fluid methods are ideally suited for simulating breaking waves around ships. A surface panelization of the ship hull is used as input to impose body-boundary conditions on a three-dimensional cartesian grid. The volume-of-fluid portion of the numerical algorithm is used to capture the free-surface interface, including the break…
▽ More
Cartesian-grid methods in combination with immersed-body and volume-of-fluid methods are ideally suited for simulating breaking waves around ships. A surface panelization of the ship hull is used as input to impose body-boundary conditions on a three-dimensional cartesian grid. The volume-of-fluid portion of the numerical algorithm is used to capture the free-surface interface, including the breaking of waves. The numerical scheme is implemented on a parallel computer. Recent improvements to the numerical scheme are discussed, including implementation of a new multigrid procedure and conversion to MPI communication. Numerical predictions are compared to laboratory measurements of a towed transom-stern model.
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
The Numerical Simulation of Ship Waves Using Cartesian Grid Methods with Adaptive Mesh Refinement
Authors:
Douglas G. Dommermuth,
Mark Sussman,
Robert F. Beck,
Thomas T. O'Shea,
Donald C. Wyatt,
Kevin Olson,
Peter MacNeice
Abstract:
Cartesian-grid methods with Adaptive Mesh Refinement (AMR) are ideally suited for simulating the breaking of waves, the formation of spray, and the entrainment of air around ships. As a result of the cartesian-grid formulation, minimal input is required to describe the ships geometry. A surface panelization of the ship hull is used as input to automatically generate a three-dimensional model. No t…
▽ More
Cartesian-grid methods with Adaptive Mesh Refinement (AMR) are ideally suited for simulating the breaking of waves, the formation of spray, and the entrainment of air around ships. As a result of the cartesian-grid formulation, minimal input is required to describe the ships geometry. A surface panelization of the ship hull is used as input to automatically generate a three-dimensional model. No three-dimensional gridding is required. The AMR portion of the numerical algorithm automatically clusters grid points near the ship in regions where wave breaking, spray formation, and air entrainment occur. Away from the ship, where the flow is less turbulent, the mesh is coarser. The numerical computations are implemented using parallel algorithms. Together, the ease of input and usage, the ability to resolve complex free-surface phenomena, and the speed of the numerical algorithms provide a robust capability for simulating the free-surface disturbances near a ship. Here, numerical predictions, with and without AMR, are compared to experimental measurements of ships moving with constant forward speed, including a vertical strut, the DDG 5415, and a wedge-like geometry.
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
The Numerical Simulation of Ship Waves Using Cartesian-Grid and Volume-of-Fluid Methods
Authors:
Douglas G. Dommermuth,
Thomas T. O'Shea,
Donald C. Wyatt,
Mark Sussman,
Gabriel D. Weymouth,
Dick K. P. Yue,
Paul Adams,
Randall Hand
Abstract:
Cartesian-grid methods in combination with immersed-body and volume-of-fluid methods are ideally suited for simulating breaking waves around ships. A surface panelization of the ship hull is used as input to impose body-boundary conditions on a three-dimensional cartesian grid. The volume-of-fluid portion of the numerical algorithm is used to capture the free-surface interface, including the break…
▽ More
Cartesian-grid methods in combination with immersed-body and volume-of-fluid methods are ideally suited for simulating breaking waves around ships. A surface panelization of the ship hull is used as input to impose body-boundary conditions on a three-dimensional cartesian grid. The volume-of-fluid portion of the numerical algorithm is used to capture the free-surface interface, including the breaking of waves. The numerical scheme is implemented on a parallel computer. Various numerical issues are discussed, including implementing exit boundary conditions, conserving mass using a novel regridding algorithm, improving resolution through the use of stretched grids, minimizing initial transients, and enforcing hull boundary conditions on cartesian grids. Numerical predictions are compared to experimental measurements of ship models moving with forward speed, including model 5415 and model 5365 (Athena). The ability to model forced-motions is illustrated using a heaving sphere moving with forward speed.
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
A Detailed Assessment of Numerical Flow Analysis (NFA) to Predict the Hydrodynamics of a Deep-V Planing Hull
Authors:
Thomas C. Fu,
Thomas T. O'Shea,
Carolyn Q. Judge,
Douglas G. Dommermuth,
Kyle A. Brucker,
Donald C. Wyatt
Abstract:
Over the past few years much progress has been made in Computational Fluid Dynamics (CFD) in its ability to accurately simulate the hydrodynamics associated with a deep-V monohull planing craft. This work has focused on not only predicting the hydrodynamic forces and moments, but also the complex multiphase free-surface flow field generated by a deep-V monohull planing boat at high Froude numbers.…
▽ More
Over the past few years much progress has been made in Computational Fluid Dynamics (CFD) in its ability to accurately simulate the hydrodynamics associated with a deep-V monohull planing craft. This work has focused on not only predicting the hydrodynamic forces and moments, but also the complex multiphase free-surface flow field generated by a deep-V monohull planing boat at high Froude numbers. One of these state of the art CFD codes is Numerical Flow Analysis (NFA). NFA provides turnkey capabilities to model breaking waves around a ship, including both plunging and spilling breaking waves, the formation of spray, and the entrainment of air. NFA uses a Cartesian-grid formulation with immersed body and volume-of-fluid methods.
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
A Comparison of Model-Scale Experimental Measurements and Computational Predictions for a Large Transom-Stern Wave
Authors:
David A. Drazen,
Anne M. Fullerton,
Thomas C. Fu,
Kristine L. C. Beale,
Thomas T. O'Shea,
Kyle A. Brucker,
Douglas G. Dommermuth,
Donald C. Wyatt,
Shanti Bhushan,
Pablo M. Carrica,
Fred Stern
Abstract:
The flow field generated by a transom stern hull form is a complex, broad-banded, three-dimensional system marked by a large breaking wave. This unsteady multiphase turbulent flow feature is difficult to study experimentally and simulate numerically. Recent model-scale experimental measurements and numerical predictions of the wave-elevation topology behind a transom-sterned hull form, Model 5673,…
▽ More
The flow field generated by a transom stern hull form is a complex, broad-banded, three-dimensional system marked by a large breaking wave. This unsteady multiphase turbulent flow feature is difficult to study experimentally and simulate numerically. Recent model-scale experimental measurements and numerical predictions of the wave-elevation topology behind a transom-sterned hull form, Model 5673, are compared and assessed in this paper. The mean height, surface roughness (RMS), and spectra of the breaking stern-waves were measured by Light Detection And Ranging (LiDAR) and Quantitative Visualization (QViz) sensors over a range of model speeds covering both wet- and dry-transom operating conditions. Numerical predictions for this data set from two Office of Naval Research (ONR) supported naval-design codes, Numerical Flow Analysis (NFA) and CFDship-Iowa-V.4, have been performed. Comparisons of experimental data, including LiDAR and QViz measurements, to the numerical predictions for wet-transom and dry transom conditions are presented and demonstrate the current state of the art in the simulation of ship generated breaking waves. This work is part of an ongoing collaborative effort as part of the ONR Ship Wave Breaking and Bubble Wake program, to assess, validate, and improve the capability of Computational Fluid Dynamics (CFD).
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
A Comparison of Experimental Measurements and Computational Predictions of a Deep-V Planing Hull
Authors:
Thomas C. Fu,
Toby Ratcliffe,
Thomas T. O'Shea,
Kyle A. Brucker,
R. Scott Graham,
Donald C. Wyatt
Abstract:
In order to support development of computational fluid dynamics codes for high-speed, small-craft applications, laboratory experiments were performed on a representative of Deep-V planing craft model. The measurements included resistance, sinkage and trim, hull pressure measurements, longitudinal wavecuts, and bow-wave and stern-wake topologies. The model was towed in calm water over a speed range…
▽ More
In order to support development of computational fluid dynamics codes for high-speed, small-craft applications, laboratory experiments were performed on a representative of Deep-V planing craft model. The measurements included resistance, sinkage and trim, hull pressure measurements, longitudinal wavecuts, and bow-wave and stern-wake topologies. The model was towed in calm water over a speed range of 1.78 to 14.2 m/s (5.8 to 46.6 ft/s) corresponding to a Froude number range of 0.31 to 2.5. At planing speeds, +8 m/s (+26.2 ft/s), the model was run with the addition of trim tabs set at two different angles, 7 and 13 degrees. Photographic documentation, including still photographs and video, was recorded during the collection of all the data. Numerical simulation of the flow field was performed utilizing the Numerical Flow Analysis (NFA) code and compared to the model test results.
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
A Comparison of Full-Scale Experimental Measurements and Computational Predictions of the Transom-Stern Wave of the R/V Athena I
Authors:
Donald C. Wyatt,
Thomas C. Fu,
Genevieve L. Taylor,
Eric J. Terrill,
Tao Xing,
Shanti Bhushan,
Thomas T. O'Shea,
Douglas G. Dommermuth
Abstract:
Full-scale experimental measurements and numerical predictions of the wave-elevation topology behind a transom-sterned vessel, the R/V Athena I, are compared and assessed in this paper. The mean height, surface roughness (RMS), and spectra of the breaking stern-waves were measured in-situ by a LIDAR sensor over a range of ship speeds covering both wet- and dry-transom operating conditions. Numeric…
▽ More
Full-scale experimental measurements and numerical predictions of the wave-elevation topology behind a transom-sterned vessel, the R/V Athena I, are compared and assessed in this paper. The mean height, surface roughness (RMS), and spectra of the breaking stern-waves were measured in-situ by a LIDAR sensor over a range of ship speeds covering both wet- and dry-transom operating conditions. Numerical predictions for this data set from two Office of Naval Research (ONR) supported naval-design codes, NFA and CFDship-Iowa-V.4, have been performed. Initial comparisons of the LIDAR data to the numerical predictions at 5.4 m/s (10.5 kts), a wet-transom condition, are presented. This work represents an ongoing effort on behalf of the ONR Ship Wave Breaking and Bubble Wake program, to assess, validate, and improve the capability of Computational Fluid Dynamics (CFD) to predict full-scale ship-generated wave fields.
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
Numerical Prediction of a Seaway
Authors:
Douglas G. Dommermuth,
Thomas C. Fu,
Kyle A. Brucker,
Thomas T. O'Shea,
Donald C. Wyatt
Abstract:
The ability of three wave theories to predict statistics and the crest kinematics of a seaway is quantified. The three wave theories are high-order spectral (HOS) theory, free-surface map** (FSM), and volume-of-fluid (VOF). Issues associated with applying these methods are discussed, including free-surface adjustment, smoothing and filtering, and forcing. Two long-crested regular waves with vary…
▽ More
The ability of three wave theories to predict statistics and the crest kinematics of a seaway is quantified. The three wave theories are high-order spectral (HOS) theory, free-surface map** (FSM), and volume-of-fluid (VOF). Issues associated with applying these methods are discussed, including free-surface adjustment, smoothing and filtering, and forcing. Two long-crested regular waves with varying bandwidth and moderate steepness are used to benchmark the performance of the wave theories. As a more stringent test, a broad-banded long-crested seaway is simulated.
△ Less
Submitted 7 October, 2014;
originally announced October 2014.