-
New bounds on heavy axions with an X-ray free electron laser
Authors:
Jack W. D. Halliday,
Giacomo Marocco,
Konstantin A. Beyer,
Charles Heaton,
Motoaki Nakatsutsumi,
Thomas R. Preston,
Charles D. Arrowsmith,
Carsten Baehtz,
Sebastian Goede,
Oliver Humphries,
Alejandro Laso Garcia,
Richard Plackett,
Pontus Svensson,
Georgios Vacalis,
Justin Wark,
Daniel Wood,
Ulf Zastrau,
Robert Bingham,
Ian Shipsey,
Subir Sarkar,
Gianluca Gregori
Abstract:
We present new exclusion bounds obtained at the European X-ray Free Electron Laser facility (EuXFEL) on axion-like particles (ALPs) in the mass range 10^{-3} eV < m_a < 10^{4} eV. Our experiment exploits the Primakoff effect via which photons can, in the presence of a strong external electric field, decay into axions, which then convert back into photons after passing through an opaque wall. While…
▽ More
We present new exclusion bounds obtained at the European X-ray Free Electron Laser facility (EuXFEL) on axion-like particles (ALPs) in the mass range 10^{-3} eV < m_a < 10^{4} eV. Our experiment exploits the Primakoff effect via which photons can, in the presence of a strong external electric field, decay into axions, which then convert back into photons after passing through an opaque wall. While similar searches have been performed previously at a 3^rd generation synchrotron [1], our work demonstrates improved sensitivity, exploiting the higher brightness of X-rays at EuXFEL.
△ Less
Submitted 6 July, 2024; v1 submitted 26 April, 2024;
originally announced April 2024.
-
Longevity Studies of CSC Prototypes Operating with Ar+CO$_{2}$ Gas Mixture and Different Fractions of CF$_{4}$
Authors:
Emanuela Barberis,
Nebojsa Begovic,
Nicholas Haubrich,
Mikhail Ignatenko,
Andrey Korytov,
Ota Kukral,
Ekaterina Kuznetsova,
Armando Lanaro,
Andrew MacCabe,
Predrag Milenovic,
Dubravka Milovanovic,
Guenakh Mitselmakher,
Aleksandra Radulovic,
Boris Rajcic,
Jake Rosenzweig,
Bingran Wang,
Jian Wang,
Andrew Wisecarver,
Darien Wood,
Emma Yeager
Abstract:
Studies of Cathode Strip Chamber longevity, comparing Ar+CO2 gas mixtures with fractions of 5%, 2%, and 0% CF4, were performed using several small cathode strip prototype chambers. In each trial, a localized source of radiation was used to irradiate up to an accumulated charge of about 300 mC/cm. Additionally, longevity of a uniformly irradiated prototype operating with 2% CF4 was studied at the C…
▽ More
Studies of Cathode Strip Chamber longevity, comparing Ar+CO2 gas mixtures with fractions of 5%, 2%, and 0% CF4, were performed using several small cathode strip prototype chambers. In each trial, a localized source of radiation was used to irradiate up to an accumulated charge of about 300 mC/cm. Additionally, longevity of a uniformly irradiated prototype operating with 2% CF4 was studied at the CERN Gamma Irradiation Facility GIF++. Post-hoc analysis of the chamber electrodes using spectroscopy techniques was also done.
△ Less
Submitted 6 February, 2024;
originally announced February 2024.
-
Homogenisation of nonlinear blood flow in periodic networks: the limit of small haematocrit heterogeneity
Authors:
Y. Ben-Ami,
B. D. Wood,
J. M. Pitt-Francis,
P. K. Maini,
H. M. Byrne
Abstract:
In this work we develop a homogenisation methodology to upscale mathematical descriptions of microcirculatory blood flow from the microscale (where individual vessels are resolved) to the macroscopic (or tissue) scale. Due to the assumed two-phase nature of blood and specific features of red blood cells (RBCs), mathematical models for blood flow in the microcirculation are highly nonlinear, coupli…
▽ More
In this work we develop a homogenisation methodology to upscale mathematical descriptions of microcirculatory blood flow from the microscale (where individual vessels are resolved) to the macroscopic (or tissue) scale. Due to the assumed two-phase nature of blood and specific features of red blood cells (RBCs), mathematical models for blood flow in the microcirculation are highly nonlinear, coupling the flow and RBC concentrations (haematocrit). In contrast to previous works which accomplished blood-flow homogenisation by assuming that the haematocrit level remains constant, here we allow for spatial heterogeneity in the haematocrit concentration and thus begin with a nonlinear microscale model. We simplify the analysis by considering the limit of small haematocrit heterogeneity which prevails when variations in haematocrit concentration between neighbouring vessels are small. Homogenisation results in a system of coupled, nonlinear partial differential equations describing the flow and haematocrit transport at the macroscale, in which a nonlinear Darcy-type model relates the flow and pressure gradient via a haematocrit-dependent permeability tensor. During the analysis we obtain further that haematocrit transport at the macroscale is governed by a purely advective equation. Applying the theory to particular examples of two- and three-dimensional geometries of periodic networks, we calculate the effective permeability tensor associated with blood flow in these vascular networks. We demonstrate how the statistical distribution of vessel lengths and diameters, together with the average haematocrit level, affect the statistical properties of the macroscopic permeability tensor. These data can be used to simulate blood flow and haematocrit transport at the macroscale.
△ Less
Submitted 16 January, 2024;
originally announced January 2024.
-
Develo** and implementing an Einsteinian science curriculum from Years 3 to 10: Part B Teacher upskilling: response to training and teacher's classroom experience
Authors:
Te**der Kaur,
Magdalena Kersting,
Kyla Adams,
David Blair,
David Treagust,
Anastasia Popkova,
Shon Boublil,
Jesse Santoso,
Li Ju,
Marjan Zadnik,
David Wood,
Elaine Horne,
Darren McGoran,
Susan Scott,
Grady Venville
Abstract:
Recent years have seen a growing interest in modernizing physics and science curricula around the world. While many science educators and curriculum developers design instructional resources to successfully introduce topics of Einsteinian physics to young learners, it is clear that successful curriculum development needs to rest on successful teacher professional development.Teachers with or witho…
▽ More
Recent years have seen a growing interest in modernizing physics and science curricula around the world. While many science educators and curriculum developers design instructional resources to successfully introduce topics of Einsteinian physics to young learners, it is clear that successful curriculum development needs to rest on successful teacher professional development.Teachers with or without science backgrounds were trained in short professional learning workshops or completed micro-credential courses. The courses enabled teachers to gain knowledge and confidence to deliver the Einstein-First program. Detailed lesson plans and instructional videos for teachers define the lessons. Questionnaires were used to collect data, and teacher interviews were conducted following the various teacher training programs. The research results show that teachers effectively deliver the Einsteinian physics programs and that their subject matter and pedagogical content knowledge increased. In addition, teacher attitudes were favorable towards modernizing the physics curriculum. We conclude that it is feasible to upskill teachers from diverse backgrounds in Einsteinian physics and break the cycle that has inhibited the modernization of school curricula.
△ Less
Submitted 19 December, 2023; v1 submitted 29 June, 2023;
originally announced June 2023.
-
Develo** and implementing an Einsteinian science curriculum from Years 3 to 10 : Part A Concepts, rationale and learning outcomes
Authors:
Te**der Kaur,
Magdalena Kersting,
David Blair,
Kyla Adams,
David Treagust,
Jesse Santoso,
Anastasia Popkova,
Shon Boublil,
Marjan Zadnik,
Li Ju,
David Wood,
Elaine Horne,
Darren McGoran
Abstract:
There has been a growing realisation that school science curricula do not adequately reflect the revolutionary changes in our scientific understanding of the 20th century. This discrepancy between current school education and our modern scientific understanding has led to calls for the modernisation of the science curriculum. Although there have been attempts to introduce topics of Einsteinian phy…
▽ More
There has been a growing realisation that school science curricula do not adequately reflect the revolutionary changes in our scientific understanding of the 20th century. This discrepancy between current school education and our modern scientific understanding has led to calls for the modernisation of the science curriculum. Although there have been attempts to introduce topics of Einsteinian physics (i.e., quantum physics and relativity) to school education, often at the secondary level, we still lack a seamless curriculum in which modern science concepts are gradually introduced in primary and middle schools. Guided by the Model of Educational Reconstruction and following a mixed-methods research design, the Einstein-First project aims to address this gap. Einstein-First has developed and implemented an Einsteinian curriculum from Years 3 to 10 (students aged 7- 16) that resolves the disconnect between science in schools and the modern world. This paper presents the concepts, rationale, and learning outcomes of the curriculum implementation in six Australian schools with 315 students across Years 3 to 10. Our findings lay the foundation for informed curriculum development towards a school education that can enhance students' understanding and appreciation of the fundamental concepts of modern science and its impact on our society.
△ Less
Submitted 21 November, 2023; v1 submitted 29 June, 2023;
originally announced June 2023.
-
Centralised Design and Production of the Ultra-High Vacuum and Laser-Stabilisation Systems for the AION Ultra-Cold Strontium Laboratories
Authors:
B. Stray,
O. Ennis,
S. Hedges,
S. Dey,
M. Langlois,
K. Bongs,
S. Lellouch,
M. Holynski,
B. Bostwick,
J. Chen,
Z. Eyler,
V. Gibson,
T. L. Harte,
M. Hsu,
M. Karzazi,
J. Mitchell,
N. Mouelle,
U. Schneider,
Y. Tang,
K. Tkalcec,
Y. Zhi,
K. Clarke,
A. Vick,
K. Bridges,
J. Coleman
, et al. (47 additional authors not shown)
Abstract:
This paper outlines the centralised design and production of the Ultra-High-Vacuum sidearm and Laser-Stabilisation systems for the AION Ultra-Cold Strontium Laboratories. Commissioning data on the residual gas and steady-state pressures in the sidearm chambers, on magnetic field quality, on laser stabilisation, and on the loading rate for the 3D Magneto-Optical Trap are presented. Streamlining the…
▽ More
This paper outlines the centralised design and production of the Ultra-High-Vacuum sidearm and Laser-Stabilisation systems for the AION Ultra-Cold Strontium Laboratories. Commissioning data on the residual gas and steady-state pressures in the sidearm chambers, on magnetic field quality, on laser stabilisation, and on the loading rate for the 3D Magneto-Optical Trap are presented. Streamlining the design and production of the sidearm and laser stabilisation systems enabled the AION Collaboration to build and equip in parallel five state-of-the-art Ultra-Cold Strontium Laboratories within 24 months by leveraging key expertise in the collaboration. This approach could serve as a model for the development and construction of other cold atom experiments, such as atomic clock experiments and neutral atom quantum computing systems, by establishing dedicated design and production units at national laboratories.
△ Less
Submitted 31 May, 2023;
originally announced May 2023.
-
A photo-click thiol-ene collagen-based hydrogel platform for skeletal muscle tissue engineering
Authors:
Roisin Holmes,
Xuebin B. Yang,
David J. Wood,
Giuseppe Tronci
Abstract:
UV-cured collagen-based hydrogels hold promise in skeletal muscle regeneration due to their soft elastic properties and porous architecture. However, the complex triple helix conformation of collagen and environmental conditions, i.e. molecular oxygen, pose risks to reaction controllability, wet-state integrity and reproducibility. To address this challenge, a photo-click hydrogel platform is pres…
▽ More
UV-cured collagen-based hydrogels hold promise in skeletal muscle regeneration due to their soft elastic properties and porous architecture. However, the complex triple helix conformation of collagen and environmental conditions, i.e. molecular oxygen, pose risks to reaction controllability, wet-state integrity and reproducibility. To address this challenge, a photo-click hydrogel platform is presented through an oxygen-insensitive thiol-ene reaction between 2-iminothiolane (2IT)-functionalized type I collagen and multi-arm, non-homopolymerizable norbornene-terminated polyethylene glycol (PEG). UV-induced network formation is demonstrated by oscillatory time sweeps on the reacting thiol-ene mixture, so that significantly increased storage moduli are measured and adjusted depending on the photo-initiator concentration. Variations in PEG functionality (4-arm and 8-arm) and PEG content generate hydrogels with skeletal muscle native stiffness (Ec= 1.3-11.5 kPa), diffusion-controlled swelling behavior and erosion-driven degradability. In vitro, no cytotoxic effect is detected on C2C12 murine myoblasts, while myogenic differentiation is successfully accomplished on hydrogel-seeded cells in low serum culture medium. In vivo, 7-day subcutaneous implantation of selected thiol-ene hydrogel in rats reveal higher cell infiltration, blood vessel formation, and denser tissue interface compared to a clinical gold standard collagen matrix (Mucograft, Geistlich). These results therefore support the applicability and further development of this hydrogel platform for skeletal muscle regeneration.
△ Less
Submitted 12 April, 2023; v1 submitted 29 March, 2023;
originally announced April 2023.
-
Chornobyl radiation spikes are not due to military vehicles disturbing soil
Authors:
Michael D. Wood,
Nicholas A. Beresford,
Catherine L. Barnett,
Peter H. Burgess,
Shelly Mobbs
Abstract:
On 25th February 2022, increased gamma radiation dose rates were reported within the Chornobyl Exclusion Zone (CEZ). This coincided with Russian military vehicles entering the Ukrainian part of the CEZ from neighbouring Belarus. It was speculated that contaminated soil resuspension by vehicle movements or a leak from the Chornobyl Nuclear Power Plant (ChNPP) complex may explain these spikes in rad…
▽ More
On 25th February 2022, increased gamma radiation dose rates were reported within the Chornobyl Exclusion Zone (CEZ). This coincided with Russian military vehicles entering the Ukrainian part of the CEZ from neighbouring Belarus. It was speculated that contaminated soil resuspension by vehicle movements or a leak from the Chornobyl Nuclear Power Plant (ChNPP) complex may explain these spikes in radiation dose rates. The gamma dose rate monitoring network in the CEZ provides a crucial early warning system for releases of radioactivity to the environment and is part of the international safeguards for nuclear facilities. With the potential for further military action in the CEZ and concerns over nuclear safety, it is essential that such anomalous readings are investigated. We evaluate the hypotheses suggested to explain the apparent gamma dose rate increases, demonstrating that neither military vehicle-induced soil resuspension nor a leak from the ChNPP are plausible. However, disruption of the Chornobyl base-station's reception of wireless signals from the CRMS network may potentially explain the dose rate increases recorded.
△ Less
Submitted 6 April, 2022;
originally announced April 2022.
-
The Potential of a TeV-Scale Muon-Ion Collider
Authors:
Darin Acosta,
Emanuela Barberis,
Nicholas Hurley,
Wei Li,
Osvaldo Miguel Colin,
Yijie Wang,
Darien Wood,
Xunwu Zuo
Abstract:
We propose the development of a novel muon-proton and muon-nucleus collider facility at the TeV scale that is capable of performing precision deep inelastic scattering measurements in new regimes and providing a rich program in nuclear and particle physics. Such a facility could seed, or leverage, the development of a muon-antimuon collider and make use of the existing hadron accelerator infrastru…
▽ More
We propose the development of a novel muon-proton and muon-nucleus collider facility at the TeV scale that is capable of performing precision deep inelastic scattering measurements in new regimes and providing a rich program in nuclear and particle physics. Such a facility could seed, or leverage, the development of a muon-antimuon collider and make use of the existing hadron accelerator infrastructure when sited at a facility such as Brookhaven National Laboratory, Fermilab, or CERN. We discuss the possible energy and luminosity design parameters for several collider configurations, and illustrate the science potential with several studies on deep inelastic scattering kinematics, Higgs and vector boson production, top quark production, and beyond Standard Model leptoquark production. Detector design considerations and a possible road map toward development are also given.
△ Less
Submitted 19 September, 2023; v1 submitted 11 March, 2022;
originally announced March 2022.
-
Long Spin Coherence Times of Nitrogen Vacancy Centres in Milled Nanodiamonds
Authors:
B. D. Wood,
G. A. Stimpson,
J. E. March,
Y. N. D. Lekhai,
C. J. Stephen,
B. L. Green,
A. C. Frangeskou,
L. Ginés,
S. Mandal,
O. A. Williams,
G. W. Morley
Abstract:
Nanodiamonds containing negatively charged nitrogen vacancy centres (${\text{NV}}^{-}$) have applications as localized sensors in biological material and have been proposed as a platform to probe the macroscopic limits of spatial superposition and the quantum nature of gravity. A key requirement for these applications is to obtain nanodiamonds containing ${\text{NV}}^{-}$ with long spin coherence…
▽ More
Nanodiamonds containing negatively charged nitrogen vacancy centres (${\text{NV}}^{-}$) have applications as localized sensors in biological material and have been proposed as a platform to probe the macroscopic limits of spatial superposition and the quantum nature of gravity. A key requirement for these applications is to obtain nanodiamonds containing ${\text{NV}}^{-}$ with long spin coherence times. Using milling to fabricate nanodiamonds processes the full 3D volume of the bulk material at once, unlike etching, but has, up to now, limited ${\text{NV}}^{-}$ spin coherence times. Here, we use natural isotopic abundance nanodiamonds produced by ${\text{Si}}_{3}{\text{N}}_{4}$ ball milling of bulk diamond grown by chemical vapour deposition with an average single substitutional nitrogen concentration of $121 ~\text{ppb}$. We show that the electron spin coherence times of ${\text{NV}}^{-}$ centres in these nanodiamonds can exceed $400 ~μ\text{s}$ at room temperature with dynamical decoupling. Scanning electron microscopy provides images of the specific nanodiamonds containing ${\text{NV}}^{-}$ for which a spin coherence time was measured.
△ Less
Submitted 3 May, 2022; v1 submitted 3 December, 2021;
originally announced December 2021.
-
Towards a test of quantum gravity with a levitated nanodiamond containing a spin
Authors:
Benjamin D. Wood,
Gavin W. Morley
Abstract:
There is significant interest in potential experimental tests of macroscopic quantum effects, both to test potential modifications to quantum theory and to probe the quantum nature of gravity. A proposed platform with which to generate the required macroscopic quantum spatial superposition is a nanodiamond containing a negatively charged nitrogen vacancy (${\text{NV}}^{-}$) centre. In this review,…
▽ More
There is significant interest in potential experimental tests of macroscopic quantum effects, both to test potential modifications to quantum theory and to probe the quantum nature of gravity. A proposed platform with which to generate the required macroscopic quantum spatial superposition is a nanodiamond containing a negatively charged nitrogen vacancy (${\text{NV}}^{-}$) centre. In this review, methods to fabricate nanodiamonds containing ${\text{NV}}^{-}$ suitable for these quantum applications are discussed. The proposed probes of the macroscopic limits of quantum theory are presented along with the spin physics of the ${\text{NV}}^{-}$ centre relevant to those tests.
△ Less
Submitted 27 October, 2021;
originally announced October 2021.
-
On the Aerodynamics of Multistage Co-Axial Vertical-Axis Wind Turbines
Authors:
Muhammad Saif Ullah Khalid,
David Wood,
Arman Hemmati
Abstract:
This study explored the aerodynamics of a new multi-stage co-axial vertical-axis wind turbine based on bio-inspiration from natural swimming habit of fish. The turbine was formed from a conventional straight-bladed vertical-axis turbine (VAWT) with a small inner rotor, also of three blades. The azimuthal and radial locations of the inner rotor were varied. Using numerical simulations, performance…
▽ More
This study explored the aerodynamics of a new multi-stage co-axial vertical-axis wind turbine based on bio-inspiration from natural swimming habit of fish. The turbine was formed from a conventional straight-bladed vertical-axis turbine (VAWT) with a small inner rotor, also of three blades. The azimuthal and radial locations of the inner rotor were varied. Using numerical simulations, performance of the proposed new design was evaluated over a range of tip-speed ratios. The preliminary results identified a 600% increase in power output for multi-stage VAWTs at tip-speed rations TSR = 0 - 3, and a substantial drop in power coefficient at TSR > 3.0. The wake dynamics analyses revealed that the increase was due to interactions between the blades of one rotor and the other. This reduced the unsteady separation from the outer rotor which produced most of the power. A detailed parametric study was also completed, which showed the implications of geometric and kinematic details on the performance of the proposed multistage VAWT.
△ Less
Submitted 9 July, 2021;
originally announced July 2021.
-
Correlation Driven Transient Hole Dynamics Resolved in Space and Time in the Isopropanol Molecule
Authors:
T. Barillot,
O. Alexander,
B. Cooper,
T. Driver,
D. Garratt,
S. Li,
A. Al Haddad,
A. Sanchez-Gonzalez,
M. Agåker,
C. Arrell,
M. Bearpark,
N. Berrah,
C. Bostedt,
J. Bozek,
C. Brahms,
P. H. Bucksbaum,
A. Clark,
G. Doumy,
R. Feifel,
L. J. Frasinski,
S. Jarosch,
A. S. Johnson,
L. Kjellsson,
P. Kolorenč,
Y. Kumagai
, et al. (24 additional authors not shown)
Abstract:
The possibility of suddenly ionized molecules undergoing extremely fast electron hole dynamics prior to significant structural change was first recognized more than 20 years ago and termed charge migration. The accurate probing of ultrafast electron hole dynamics requires measurements that have both sufficient temporal resolution and can detect the localization of a specific hole within the molecu…
▽ More
The possibility of suddenly ionized molecules undergoing extremely fast electron hole dynamics prior to significant structural change was first recognized more than 20 years ago and termed charge migration. The accurate probing of ultrafast electron hole dynamics requires measurements that have both sufficient temporal resolution and can detect the localization of a specific hole within the molecule. We report an investigation of the dynamics of inner valence hole states in isopropanol where we use an x-ray pump/x-ray probe experiment, with site and state-specific probing of a transient hole state localized near the oxygen atom in the molecule, together with an ab initio theoretical treatment. We record the signature of transient hole dynamics and make the first observation of dynamics driven by frustrated Auger-Meitner transitions. We verify that the hole lifetime is consistent with our theoretical prediction. This state-specific measurement paves the way to widespread application for observations of transient hole dynamics localized in space and time in molecules and thus to charge transfer phenomena that are fundamental in chemical and material physics.
△ Less
Submitted 13 May, 2021;
originally announced May 2021.
-
Spin dynamical decoupling for generating macroscopic superpositions of a free-falling nanodiamond
Authors:
B. D. Wood,
S. Bose,
G. W. Morley
Abstract:
Levitated nanodiamonds containing negatively charged nitrogen-vacancy centers (${\text{NV}}^{-}$) have been proposed as a platform to generate macroscopic spatial superpositions. Requirements for this include having a long ${\text{NV}}^{-}$ spin coherence time, which necessitates formulating a dynamical decoupling strategy in which the regular spin flips do not cancel the growth of the superpositi…
▽ More
Levitated nanodiamonds containing negatively charged nitrogen-vacancy centers (${\text{NV}}^{-}$) have been proposed as a platform to generate macroscopic spatial superpositions. Requirements for this include having a long ${\text{NV}}^{-}$ spin coherence time, which necessitates formulating a dynamical decoupling strategy in which the regular spin flips do not cancel the growth of the superposition through the Stern-Gerlach effect in an inhomogeneous magnetic field. Here, we propose a scheme to place a $250$-nm-diameter diamond in a superposition with spatial separation of over $250$ nm, while incorporating dynamical decoupling. We achieve this by letting a diamond fall for $2.4$ m through a magnetic structure, including $1.13$ m in an inhomogeneous region generated by magnetic teeth.
△ Less
Submitted 31 January, 2022; v1 submitted 5 May, 2021;
originally announced May 2021.
-
Explicit physics-informed neural networks for non-linear upscaling closure: the case of transport in tissues
Authors:
Ehsan Taghizadeh,
Helen M. Byrne,
Brian D. Wood
Abstract:
In this work, we use a combination of formal upscaling and data-driven machine learning for explicitly closing a nonlinear transport and reaction process in a multiscale tissue. The classical effectiveness factor model is used to formulate the macroscale reaction kinetics. We train a multilayer perceptron network using training data generated by direct numerical simulations over microscale example…
▽ More
In this work, we use a combination of formal upscaling and data-driven machine learning for explicitly closing a nonlinear transport and reaction process in a multiscale tissue. The classical effectiveness factor model is used to formulate the macroscale reaction kinetics. We train a multilayer perceptron network using training data generated by direct numerical simulations over microscale examples. Once trained, the network is used for numerically solving the upscaled (coarse-grained) differential equation describing mass transport and reaction in two example tissues. The network is described as being explicit in the sense that the network is trained using macroscale concentrations and gradients of concentration as components of the feature space.
Network training and solutions to the macroscale transport equations were computed for two different tissues. The two tissue types (brain and liver) exhibit markedly different geometrical complexity and spatial scale (cell size and sample size). The upscaled solutions for the average concentration are compared with numerical solutions derived from the microscale concentration fields by a posteriori averaging. There are two outcomes of this work of particular note: 1) we find that the trained network exhibits good generalizability, and it is able to predict the effectiveness factor with high fidelity for realistically-structured tissues despite the significantly different scale and geometry of the two example tissue types; and 2) the approach results in an upscaled PDE with an effectiveness factor that is predicted (implicitly) via the trained neural network. This latter result emphasizes our purposeful connection between conventional averaging methods with the use of machine learning for closure; this contrasts with some machine learning methods for upscaling where the exact form of the macroscale equation remains unknown.
△ Less
Submitted 3 April, 2021;
originally announced April 2021.
-
Measurement of the relative response of TowerJazz Mini-MALTA CMOS prototypes at Diamond Light Source
Authors:
Maria Mironova,
Kaloyan Metodiev,
Phil Allport,
Ivan Berdalovic,
Daniela Bortoletto,
Craig Buttar,
Roberto Cardella,
Valerio Dao,
Mateusz Dyndal,
Patrick Freeman,
Leyre Flores Sanz de Acedo,
Laura Gonella,
Thanushan Kugathasan,
Heinz Pernegger,
Francesco Piro,
Richard Plackett,
Petra Riedler,
Abhishek Sharma,
Enrico Junior Schioppa,
Ian Shipsey,
Carlos Solans Sanchez,
Walter Snoeys,
Hakan Wennloef,
Daniel Weatherill,
Daniel Wood
, et al. (1 additional authors not shown)
Abstract:
This paper outlines the results of investigations into the effects of radiation damage in the mini-MALTA prototype. Measurements were carried out at Diamond Light Source using a micro-focus X-ray beam, which scanned across the surface of the device in 2 $\mathrm{μm}$ steps. This allowed the in-pixel photon response to be measured directly with high statistics. Three pixel design variations were co…
▽ More
This paper outlines the results of investigations into the effects of radiation damage in the mini-MALTA prototype. Measurements were carried out at Diamond Light Source using a micro-focus X-ray beam, which scanned across the surface of the device in 2 $\mathrm{μm}$ steps. This allowed the in-pixel photon response to be measured directly with high statistics. Three pixel design variations were considered: one with the standard continuous $\mathrm{n^-}$ layer layout and front-end, and extra deep p-well and $\mathrm{n^-}$ gap designs with a modified front-end. Five chips were measured: one unirradiated, one neutron irradiated, and three proton irradiated.
△ Less
Submitted 2 October, 2019; v1 submitted 18 September, 2019;
originally announced September 2019.
-
Monomer-induced customisation of UV-cured atelocollagen hydrogel networks
Authors:
He Liang,
Stephen J. Russell,
David J. Wood,
Giuseppe Tronci
Abstract:
The covalent functionalisation of type I atelocollagen with either 4-vinylbenzyl or methacrylamide residues is presented as a simple synthetic strategy to achieve customisable, cell-friendly UV-cured hydrogel networks with widespread clinical applicability. Molecular parameters, i.e. the type of monomer, degree of atelocollagen functionalisation and UV curing solution, have been systematically var…
▽ More
The covalent functionalisation of type I atelocollagen with either 4-vinylbenzyl or methacrylamide residues is presented as a simple synthetic strategy to achieve customisable, cell-friendly UV-cured hydrogel networks with widespread clinical applicability. Molecular parameters, i.e. the type of monomer, degree of atelocollagen functionalisation and UV curing solution, have been systematically varied and their effect on gelation kinetics, swelling behaviour, elastic properties and enzymatic degradability investigated. UV-cured hydrogel networks deriving from atelocollagen precursors functionalised with equivalent molar content of 4-vinylbenzyl and methacrylamide adducts proved to display remarkably-different swelling ratio, storage modulus and collagenase resistance, similarly to the case of UV-cured hydrogel networks obtained with the same type of methacrylamide adduct, but varied degree of functionalisation. UV-induced network formation of 4VBC functionalised atelocollagen molecules yielded hydrogels with increased stiffness and enzymatic stability, attributed to the molecular rigidity of resulting aromatised crosslinking segment, whilst no toxic response was observed with osteosarcoma G292 cells. Although to a lesser extent, the pH of the UV-curing solution also proved to affect macroscopic hydrogel properties, likely due to the altered organisation of atelocollagen molecules during network formation. By leveraging the knowledge gained with classic synthetic networks, this study highlights how the type of monomer can be conveniently exploited to realise customisable atelocollagen hydrogels with controlled structure-property relationships to meet the requirements of unmet clinical applications.
△ Less
Submitted 13 December, 2018; v1 submitted 3 December, 2018;
originally announced December 2018.
-
A hydroxamic acid-methacrylated collagen conjugate for the modulation of inflammation-related MMP upregulation
Authors:
H Liang,
SJ Russell,
DJ Wood,
G Tronci
Abstract:
Medical devices with matrix metalloproteinase (MMP) modulating functionality are highly desirable to restore tissue homeostasis in critical inflammation states, such as chronic wounds, rotator cuff tears and cancer. The introduction of MMP-modulating functionality in such devices is typically achieved via loading of either rapidly-diffusing chelating factors, e.g. EDTA, or MMP-cleavable substrates…
▽ More
Medical devices with matrix metalloproteinase (MMP) modulating functionality are highly desirable to restore tissue homeostasis in critical inflammation states, such as chronic wounds, rotator cuff tears and cancer. The introduction of MMP-modulating functionality in such devices is typically achieved via loading of either rapidly-diffusing chelating factors, e.g. EDTA, or MMP-cleavable substrates, raising issues in terms of non-controllable pharmacokinetics and enzymatic degradability, respectively. Aiming to accomplish inherent, long-term, device-induced MMP regulation, this study investigated the synthesis of a hydroxamic acid (HA)-methacrylated collagen conjugate as the building block of a soluble factor-free MMP-modulating hydrogel network with controlled enzymatic degradability. This was realised via a two-step synthetic route: (i) type I collagen was functionalised with photonetwork-inducing methacrylic anhydride (MA) adducts; (ii) this methacrylated product was activated with a water-soluble carbodiimide prior to reaction with hydroxylamine, resulting in MMP-chelating HA functions. Nearly-quantitative methacrylation of collagen amines was observed via 2,4,6-trinitrobenzenesulfonic acid (TNBS) assay. The molar content of HA adducts was indirectly quantified via conversion of remaining carboxyl functions into ethylenediamine (EDA), so that 12-16 mol.% HA was revealed in the conjugate. Resulting UV cured, HA-bearing collagen hydrogels proved to induce up to ~13 and ~32 RFU% activity reduction of MMP-9 and MMP-3, respectively, following 4-day incubation in vitro. No hydrogel-induced toxic response was observed following 4-day culture of G292 cells. The novel synthetic strategies described in this work provide a new insight into the systematic chemical manipulation of collagen materials aiming at the design of biomimetic, inflammation-responsive medical devices.
△ Less
Submitted 27 April, 2018;
originally announced May 2018.
-
Influence of telopeptides on the structural and physical properties of polymeric and monomeric acid-soluble type I collagen
Authors:
Roison Holmes,
Steve Kirk,
Giuseppe Tronci,
Xeubin Yang,
David Wood
Abstract:
Currently two factors hinder the use of collagen as building block of regenerative devices: the potential antigenicity, and limited mechanical strength in aqueous environment. Polymeric collagen is naturally found in the cross-linked state and is mechanically tougher than the monomeric, cross-link-free (acid-soluble) collagen ex vivo. The antigenicity of collagen, on the other hand, is mainly ascr…
▽ More
Currently two factors hinder the use of collagen as building block of regenerative devices: the potential antigenicity, and limited mechanical strength in aqueous environment. Polymeric collagen is naturally found in the cross-linked state and is mechanically tougher than the monomeric, cross-link-free (acid-soluble) collagen ex vivo. The antigenicity of collagen, on the other hand, is mainly ascribed to inter-species variations in amino acid sequences, which are primarily located in the non-helical terminal telopeptides. Although these can be removed through enzymatic treatment to produce atelocollagen, the effect of telopeptide removal on triple helix organization, amino acidic composition and thermal properties is often disregarded. Here, we compare the structural, chemical and physical properties of polymeric and monomeric type I collagen with and without telopeptides, in an effort to elucidate the influence that either covalent crosslinks or telopeptides possess. Circular dichroism (CD) was used to examine the triple helical conformation and quantify the denaturation temperature (Td) of both monomeric collagen (36.5 °C) and monomeric atelocollagen (35.5 °C). CD measurements were combined with differential scanning calorimetry (DSC) in order to gain insight into the triple helix-to-coil thermal transition and shrinkage temperature (Ts) of polymeric atelo collagen (44.8 °C), polymeric collagen (62.7 °C), monomeric atelo collagen (51.4 °C) and monomeric collagen (66.5 °C). Structural and thermal analyses were combined with high pressure liquid chromatography (HPLC) to determine the content of specific collagen amino acidic residues used as markers for the presence of telopeptides and mature crosslinks.
△ Less
Submitted 9 June, 2017;
originally announced June 2017.
-
Thiol-ene photo-click collagen-PEG hydrogels: impact of water-soluble photoinitiators on cell viability, gelation kinetics and rheological properties
Authors:
Roisin Holmes,
Xuebin B Yang,
Aishling Dunne,
Larisa Florea,
David Wood,
Giuseppe Tronci
Abstract:
Thiol-ene photo-click hydrogels were prepared via step-growth polymerisation using thiol-functionalised type-I collagen and 8-arm poly(ethylene glycol) norbornene terminated (PEG-NB), as a potential injectable regenerative device. Type-I collagen was thiol-functionalised by a ring opening reaction with 2-iminothiolane (2IT), whereby up to 80 Abs% functionalisation and 90 RPN% triple helical preser…
▽ More
Thiol-ene photo-click hydrogels were prepared via step-growth polymerisation using thiol-functionalised type-I collagen and 8-arm poly(ethylene glycol) norbornene terminated (PEG-NB), as a potential injectable regenerative device. Type-I collagen was thiol-functionalised by a ring opening reaction with 2-iminothiolane (2IT), whereby up to 80 Abs% functionalisation and 90 RPN% triple helical preservation were recorded via 2,4,6-Trinitrobenzenesulfonic acid (TNBS) colorimetric assay and circular dichroism (CD). Type, i.e. 2-Hydroxy-1-[4-(2-hydroxyethoxy)phenyl]-2-methyl-1-propanone (I2959) or lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP), and concentration of photoinitiator were varied to ensure minimal photoinitiator-induced cytotoxicity and to enable thiol-ene network formation of collagen-PEG mixtures. The viability of G292 cells following 24 h culture in photoinitiator-supplemented media was largely affected by the photoinitiator concentration, with I2959-supplemented media observed to induce higher toxic response compared to LAP-supplemented media. In line with the in vitro study, selected photoinitiator concentrations were used to prepare thiol-ene photo-click hydrogels. Gelation kinetics proved to be largely affected by the specific photoinitiator, with LAP-containing thiol-ene mixtures leading to significantly reduced complete gelation time with respect to I2959-containing mixtures. Other than the specific photoinitiator, the photoinitiator concentration was key to adjust hydrogel storage modulus (G'), whereby 15-fold G' increase was observed in samples prepared with 0.5% (w/v) compared to 0.1% (w/v) LAP. The photoinitiator-gelation-cytotoxicity relationships established in this study will be instrumental to the design of orthogonal collagen-based niches for regenerative medicine.
△ Less
Submitted 9 June, 2017;
originally announced June 2017.
-
Hydrolytic and lysozymic degradability of chitosan systems with heparin-mimicking pendant groups
Authors:
Giuseppe Tronci,
Petronela Buiga,
Ahmed Alhilou,
Thuy Do,
Stephen J. Russell,
David J. Wood
Abstract:
Chitosan (CT) is an antibacterial polysaccharide that has been investigated for drug carriers, haemostats and wound dressings. For these applications, customised CT devices can often be obtained with specific experimental conditions, which can irreversibly alter native biopolymer properties and functions and lead to unreliable material behaviour. In order to investigate the structure-function rela…
▽ More
Chitosan (CT) is an antibacterial polysaccharide that has been investigated for drug carriers, haemostats and wound dressings. For these applications, customised CT devices can often be obtained with specific experimental conditions, which can irreversibly alter native biopolymer properties and functions and lead to unreliable material behaviour. In order to investigate the structure-function relationships in CT covalent networks, monosodium 5-sulfoisophthalate (PhS) was selected as heparin-mimicking, growth factor-binding crosslinking segment, whilst 1,4-phenylenediacetic acid (4Ph) and poly(ethylene glycol) bis(carboxymethyl) ether (PEG) were employed as sulfonic acid-free diacids of low and high crosslinker length respectively. Hydrogels based on short crosslinkers (PhS and 4Ph) displayed increased crosslink density, decreased swelling ratio as well as minimal hydrolytic and lysozymic degradation, whilst addition of lysozymes to PEG based networks resulted in 70 wt.-% mass loss. PhS-crosslinked CT hydrogels displayed the highest loss (40 +/- 6 CFU%) of antibacterial activity upon incubation with Porphyromonas gingivalis, whilst respective extracts were tolerated by L929 mouse fibroblasts.
△ Less
Submitted 5 December, 2016; v1 submitted 28 November, 2016;
originally announced November 2016.
-
In silico modeling of the rheological properties of covalently crosslinked collagen triple helices
Authors:
David A. Head,
Giuseppe Tronci,
Stephen J. Russell,
David J. Wood
Abstract:
Biomimetic hydrogels based on natural polymers are a promising class of biomaterial, mimicking the natural extra-cellular matrix of biological tissues and providing cues for cell attachment, proliferation and differentiation. With a view to providing an upstream method to guide subsequent experimental design, the aim of this study was to introduce a mathematical model that described the rheologica…
▽ More
Biomimetic hydrogels based on natural polymers are a promising class of biomaterial, mimicking the natural extra-cellular matrix of biological tissues and providing cues for cell attachment, proliferation and differentiation. With a view to providing an upstream method to guide subsequent experimental design, the aim of this study was to introduce a mathematical model that described the rheological properties of a hydrogel system based on covalently crosslinked collagen triple helices. In light of their organization, such gels exhibit limited collagen bundling that cannot be described by existing fibril network models. The model presented here treats collagen triple helices as discrete semi-flexible polymers, permits full access to metrics for network microstructure, and should provide a comprehensive understanding of the parameter space associated with the development of such multi-functional materials. Triple helical hydrogel networks were experimentally obtained via reaction of type I collagen with both aromatic and aliphatic diacids. The complex modulus G* was found from rheological testing in linear shear and quantitatively compared to model predictions. In silico data from the computational model successfully described the experimental trends in hydrogel storage modulus with either (i) the concentration of collagen triple helices during crosslinking reaction or (ii) the type of crosslinking segment introduced in resulting hydrogel networks. This approach may pave the way to a step change in the rational design of biomimetic triple helical collagen systems with controlled multi-functionality.
△ Less
Submitted 23 October, 2016;
originally announced October 2016.
-
Protease-sensitive atelocollagen hydrogels promote healing in a diabetic wound model
Authors:
Giuseppe Tronci,
Jie Yin,
Roisin A. Holmes,
He Liang,
Stephen J. Russell,
David J. Wood
Abstract:
The design of exudate-managing wound dressings is an established route to accelerated healing, although such design remains a challenge from material and manufacturing standpoints. Aiming towards the clinical translation of knowledge gained in vitro with highly swollen rat tail collagen hydrogels, this study investigated the healing capability in a diabetic mouse wound model of telopeptide-free, p…
▽ More
The design of exudate-managing wound dressings is an established route to accelerated healing, although such design remains a challenge from material and manufacturing standpoints. Aiming towards the clinical translation of knowledge gained in vitro with highly swollen rat tail collagen hydrogels, this study investigated the healing capability in a diabetic mouse wound model of telopeptide-free, protease-inhibiting collagen networks. 4 vinylbenzylation and UV irradiation of type I atelocollagen (AC) led to hydrogel networks with chemical and macroscopic properties comparable to previous collagen analogues, attributable to similar lysine content and dichroic properties. After 4 days in vitro, hydrogels induced nearly 50 RFU% reduction in matrix metalloproteinase (MMP)-9 activity, whilst showing less than 20 wt.-% weight loss. After 20 days in vivo, dry networks promoted 99% closure of 10x10 mm full thickness wounds and accelerated neodermal tissue formation compared to Mepilex. This collagen system can be equipped with multiple, customisable properties and functions key to personalised chronic wound care.
△ Less
Submitted 18 October, 2016;
originally announced October 2016.
-
Influence of 4-vinylbenzylation on the rheological and swelling properties of photo-activated collagen hydrogels
Authors:
Giuseppe Tronci,
Colin A. Grant,
Neil H. Thomson,
Stephen J. Russell,
David J. Wood
Abstract:
Covalent functionalisation of collagen has been shown to be a promising strategy to adjust the mechanical properties of highly swollen collagen hydrogels. At the same time, secondary interactions between for example, amino acidic terminations or introduced functional groups also play an important role and are often challenging to predict and control. To explore this challenge, 4-vinylbenzyl chlori…
▽ More
Covalent functionalisation of collagen has been shown to be a promising strategy to adjust the mechanical properties of highly swollen collagen hydrogels. At the same time, secondary interactions between for example, amino acidic terminations or introduced functional groups also play an important role and are often challenging to predict and control. To explore this challenge, 4-vinylbenzyl chloride (4VBC) and methacrylic anhydride (MA) were reacted with type I collagen, and the swelling and rheological properties of resulting photo activated hydrogel systems investigated. 4VBC-based hydrogels showed significantly increased swelling ratio, in light of the lower degree of collagen functionalisation, with respect to methacrylated collagen networks, whilst rheological storage moduli were found to be comparable between the two systems. To explore the role of benzyl groups in the mechanical properties of the 4VBC-based collagen system, model chemical force microscopy (CFM) was carried out in aqueous environment with an aromatised probe against an aromatised gold coated glass slide. A marked increase in adhesion force (F: 0.11 +/- 0.01 nN) was measured between aromatised samples, compared to the adhesion force observed between the non-modified probe and a glass substrate (F: 2.64 +/- 1.82 nN). These results suggest the formation of additional and reversible π-π stacking interactions in aromatic 4VBC-based networks and explain the remarkable rheological properties of this system in comparison to MA based hydrogels.
△ Less
Submitted 5 December, 2015;
originally announced December 2015.
-
Compositional and in Vitro Evaluation of Nonwoven Type I Collagen/Poly-dl-lactic Acid Scaffolds for Bone Regeneration
Authors:
Xiangchen Qiao,
Stephen J. Russell,
Xuebin Yang,
Giuseppe Tronci,
David J. Wood
Abstract:
Poly-dl-lactic acid (PDLLA) was blended with type I collagen to attempt to overcome the instantaneous gelation of electrospun collagen scaffolds in biological environments. Scaffolds based on blends of type I collagen and PDLLA were investigated for material stability in cell culture conditions (37 °C; 5% CO2) in which post-electrospinning glutaraldehyde crosslinking was also applied. The resultin…
▽ More
Poly-dl-lactic acid (PDLLA) was blended with type I collagen to attempt to overcome the instantaneous gelation of electrospun collagen scaffolds in biological environments. Scaffolds based on blends of type I collagen and PDLLA were investigated for material stability in cell culture conditions (37 °C; 5% CO2) in which post-electrospinning glutaraldehyde crosslinking was also applied. The resulting wet-stable webs were cultured with bone marrow stromal cells (HBMSC) for five weeks. Scanning electron microscopy (SEM), confocal laser scanning microscopy (CLSM), Fourier transform infra-red spectroscopy (FTIR) and biochemical assays were used to characterise the scaffolds and the consequent cell-scaffold constructs. To investigate any electrospinning-induced denaturation of collagen, identical PDLLA/collagen and PDLLA/gelatine blends were electrospun and their potential to promote osteogenic differentiation investigated. PDLLA/collagen blends with w/w ratios of 40/60, 60/40 and 80/20 resulted in satisfactory wet stabilities in a humid environment, although chemical crosslinking was essential to ensure long term material cell culture. Scaffolds of PDLLA/collagen at a 60:40 weight ratio provided the greatest stability over a five-week culture period. The PDLLA/collagen scaffolds promoted greater cell proliferation and osteogenic differentiation compared to HMBSCs seeded on the corresponding PDLLA/gelatine scaffolds, suggesting that any electrospinning-induced collagen denaturation did not affect material biofunctionality within 5 weeks in vitro.
△ Less
Submitted 6 September, 2015;
originally announced September 2015.
-
Biomimetic wet-stable fibres via wet spinning and diacid-based crosslinking of collagen triple helices
Authors:
M. Tarik Arafat,
Giuseppe Tronci,
Jie Yin,
David J. Wood,
Stephen J. Russell
Abstract:
One of the limitations of electrospun collagen as bone-like fibrous structure is the potential collagen triple helix denaturation in the fibre state and the corresponding inadequate wet stability even after crosslinking. Here, we have demonstrated the feasibility of accomplishing wet-stable fibres by wet spinning and diacid-based crosslinking of collagen triple helices, whereby fibre ability to ac…
▽ More
One of the limitations of electrospun collagen as bone-like fibrous structure is the potential collagen triple helix denaturation in the fibre state and the corresponding inadequate wet stability even after crosslinking. Here, we have demonstrated the feasibility of accomplishing wet-stable fibres by wet spinning and diacid-based crosslinking of collagen triple helices, whereby fibre ability to act as bone-mimicking mineralisation system has also been explored. Circular dichroism (CD) demonstrated nearly complete triple helix retention in resulting wet-spun fibres, and the corresponding chemically crosslinked fibres successfully preserved their fibrous morphology following 1-week incubation in phosphate buffer solution (PBS). The presented novel diacid-based crosslinking route imparted superior tensile modulus and strength to the resulting fibres indicating that covalent functionalization of distant collagen molecules is unlikely to be accomplished by current state-of-the-art carbodiimide-based crosslinking. To mimic the constituents of natural bone extra cellular matrix (ECM), the crosslinked fibres were coated with carbonated hydroxyapatite (CHA) through biomimetic precipitation, resulting in an attractive biomaterial for guided bone regeneration (GBR), e.g. in bony defects of the maxillofacial region.
△ Less
Submitted 18 September, 2015;
originally announced September 2015.
-
Wet-spinnability and crosslinked fibre properties of two collagen polypeptides with varied molecular weight
Authors:
Giuseppe Tronci,
Ramya Sri Kanuparti,
M. Tarik Arafat,
Jie Yin,
David J. Wood,
Stephen J. Russell
Abstract:
The formation of naturally-derived materials with wet stable fibrous architectures is paramount in order to mimic the features of tissues at the molecular and microscopic scale. Here, we investigated the formation of wet-spun fibres based on collagen-derived polypeptides with comparable chemical composition and varied molecular weight. Gelatin and hydrolysed fish collagen (HFC) were selected as wi…
▽ More
The formation of naturally-derived materials with wet stable fibrous architectures is paramount in order to mimic the features of tissues at the molecular and microscopic scale. Here, we investigated the formation of wet-spun fibres based on collagen-derived polypeptides with comparable chemical composition and varied molecular weight. Gelatin and hydrolysed fish collagen (HFC) were selected as widely-available linear amino-acidic chains of high and low molecular weight, respectively, and functionalised in the wet-spun fibre state in order to preserve the material geometry in physiological conditions. Wet-spun fibre diameter and morphology were dramatically affected depending on the polypeptide molecular weight, wet-spinning solvent (i.e. 2,2,2-Trifluoroethanol and dimethyl sulfoxide) and coagulating medium (i.e. acetone and ethanol), resulting in either bulky or porous internal geometry. Dry-state tensile moduli were significantly enhanced in gelatin and HFC samples following covalent crosslinking with activated 1,3 phenylenediacetic acid (Ph) (E: 726 +/- 43 - 844 +/- 85 MPa), compared to samples crosslinked via intramolecular carbodiimide-mediated condensation reaction (E: 588 +/- 38 MPa). Resulting fibres displayed a dry diameter in the range of 238 +/- 18 - 355 +/- 28 micron and proved to be mechanically-stable (E: 230 kPa) following equilibration with PBS, whilst a nearly-complete degradation was observed after 5-day incubation in physiological conditions.
△ Less
Submitted 26 July, 2015;
originally announced July 2015.
-
Excitation, detection, and electrostatic manipulation of terahertz-frequency range plasmons in a two-dimensional electron system
Authors:
**gbo Wu,
Alexander S. Mayorov,
Christopher D. Wood,
Divyang Mistry,
Lianhe Li,
Wilson Muchenje,
Mark C. Rosamond,
Li Chen,
Edmund H. Linfield,
A. Giles Davies,
John E. Cunningham
Abstract:
Terahertz time domain spectroscopy employing free-space radiation has frequently been used to probe the elementary excitations of low-dimensional systems. The diffraction limit blocks its use for the in-plane study of individual laterally defined nanostructures, however. Here, we demonstrate a planar terahertz-frequency plasmonic circuit in which photoconductive material is monolithically integrat…
▽ More
Terahertz time domain spectroscopy employing free-space radiation has frequently been used to probe the elementary excitations of low-dimensional systems. The diffraction limit blocks its use for the in-plane study of individual laterally defined nanostructures, however. Here, we demonstrate a planar terahertz-frequency plasmonic circuit in which photoconductive material is monolithically integrated with a two-dimensional electron system. Plasmons with a broad spectral range (up to ~400 GHz) are excited by injecting picosecond-duration pulses, generated and detected by a photoconductive semiconductor, into a high mobility two-dimensional electron system. Using voltage modulation of a Schottky gate overlying the two-dimensional electron system, we form a tuneable plasmonic cavity, and observe electrostatic manipulation of the plasmon resonances. Our technique offers a direct route to access the picosecond dynamics of confined transport in a broad range of lateral nanostructures.
△ Less
Submitted 24 June, 2015;
originally announced June 2015.
-
Multi-scale Mechanical Characterization of Highly Swollen Photo-activated Collagen Hydrogels
Authors:
Giuseppe Tronci,
Colin A. Grant,
Neil H. Thomson,
Stephen J. Russell,
David J. Wood
Abstract:
Biological hydrogels have been increasingly sought after as e.g. wound dressings or scaffolds for regenerative medicine, due to their inherent biofunctionality in biological environments. Especially in moist wound healing, the ideal material should absorb large amounts of wound exudate whilst remaining mechanically competent in-situ. Despite their large hydration, however, current biological hydro…
▽ More
Biological hydrogels have been increasingly sought after as e.g. wound dressings or scaffolds for regenerative medicine, due to their inherent biofunctionality in biological environments. Especially in moist wound healing, the ideal material should absorb large amounts of wound exudate whilst remaining mechanically competent in-situ. Despite their large hydration, however, current biological hydrogels still leave much to be desired in terms of mechanical properties in physiological conditions. To address this challenge, a multi-scale approach is presented for the synthetic design of cyto-compatible collagen hydrogels with tunable mechanical properties (from nano- up to the macro-scale), uniquely high swelling ratios and retained (>70%) triple-helical features. Type I collagen was covalently functionalized with three different monomers, i.e. 4 vinylbenzyl chloride, glycidyl methacrylate and methacrylic anhydride, respectively. Backbone rigidity, hydrogen-bonding capability and degree of functionalization (<i>F</i>: 16±12 &ndash 91±7 mol.-%) of introduced moieties governed the structure-property relationships in resulting collagen networks, so that the swelling ratio (<i>SR</i>: 707±51 &ndash 1996±182 wt.-%), bulk compressive modulus (<i>E<sub>c</sub></i>: 30±7 &ndash 168±40 kPa) and Atomic Force Microscopy elastic modulus (<i>E<sub>AFM</sub></i>: 16±2 &ndash 387±66 kPa) were readily adjusted. In light of their remarkably high swelling and mechanical properties, these tunable collagen hydrogels may be further exploited for the design of advanced dressings for chronic wound care.
△ Less
Submitted 23 October, 2014; v1 submitted 22 October, 2014;
originally announced October 2014.
-
Tuneable drug-loading capability of chitosan hydrogels with varied network architectures
Authors:
Giuseppe Tronci,
Hiroharu Ajiro,
Stephen J. Russell,
David J. Wood,
Mitsuru Akashi
Abstract:
Advanced bioactive systems with defined macroscopic properties and spatio-temporal sequestration of extracellular biomacromolecules are highly desirable for next generation therapeutics. Here, chitosan hydrogels were prepared with neutral or negatively-charged crosslinkers in order to promote selective electrostatic complexation with charged drugs. Chitosan (CT) was functionalised with varied dica…
▽ More
Advanced bioactive systems with defined macroscopic properties and spatio-temporal sequestration of extracellular biomacromolecules are highly desirable for next generation therapeutics. Here, chitosan hydrogels were prepared with neutral or negatively-charged crosslinkers in order to promote selective electrostatic complexation with charged drugs. Chitosan (CT) was functionalised with varied dicarboxylic acids, such as tartaric acid (TA), poly(ethylene glycol) bis(carboxymethyl) ether (PEG), 1.4-Phenylenediacetic acid (4Ph) and 5-Sulfoisophthalic acid monosodium salt (PhS), whereby PhS was hypothesised to act as a simple mimetic of heparin. ATR FT-IR showed the presence of C=O amide I, N-H amide II and C=O ester bands, providing evidence of covalent network formation. The crosslinker content was reversely quantified by 1H-NMR on partially-degraded network oligomers, so that 18 mol% PhS was exemplarily determined. Swellability, compressability, material morphology, and drug-loading capability were successfully adjusted based on the selected network architecture. Here, hydrogel incubation with model drugs of varied electrostatic charge, i.e. allura red (AR, --), methyl orange (MO, -) or methylene blue (MB, +), resulted in direct hydrogel-dye electrostatic complexation. Importantly, the cationic compound, MB, showed different incorporation behaviours, depending on the electrostatic character of the selected crosslinker. In light of this tuneable drug-loading capability, these CT hydrogels would be highly attractive as drug reservoirs towards e.g. the fabrication of tissue models in vitro.
△ Less
Submitted 28 October, 2013;
originally announced October 2013.
-
Triple-helical collagen hydrogels via covalent aromatic functionalization with 1,3-Phenylenediacetic acid
Authors:
Giuseppe Tronci,
Amanda Doyle,
Stephen J. Russell,
David J. Wood
Abstract:
Chemical crosslinking of collagen is a general strategy to reproduce macroscale tissue properties in physiological environment. However, simultaneous control of protein conformation, material properties and biofunctionality is highly challenging with current synthetic strategies. Consequently, the potentially-diverse clinical applications of collagen-based biomaterials cannot be fully realised. In…
▽ More
Chemical crosslinking of collagen is a general strategy to reproduce macroscale tissue properties in physiological environment. However, simultaneous control of protein conformation, material properties and biofunctionality is highly challenging with current synthetic strategies. Consequently, the potentially-diverse clinical applications of collagen-based biomaterials cannot be fully realised. In order to establish defined biomacromolecular systems for mineralised tissue applications, type I collagen was functionalised with 1,3-Phenylenediacetic acid (Ph) and investigated at the molecular, macroscopic and functional levels. Preserved triple helix conformation was observed in obtained covalent networks via ATR-FTIR and WAXS, while network crosslinking degree could be adjusted based on specific reaction conditions. Decreased swelling ratio and increased thermo-mechanical properties were observed compared to state of-the-art carbodiimide (EDC)-crosslinked collagen controls, likely related to the intermolecular covalent incorporation of the aromatic segment. Ph crosslinked hydrogels displayed nearly intact material integrity and only a slight mass decrease following 1-week incubation in either PBS or simulated body fluid (SBF), in contrast to EDC crosslinked collagen. Furthermore, FTIR, SEM and EDS revealed deposition of a calcium-phosphate phase on SBF-retrieved samples, whereby an increased calcium phosphate ratio was observed in hydrogels with higher Ph content. 72-hour material extracts were well tolerated by L929 mouse fibroblasts, whereby cell confluence and metabolic activity (MTS assay) were comparable to those of cells cultured in cell culture medium (positive control). In light of their controlled structure-function properties, these biocompatible collagen hydrogels represent attractive material systems for potential mineralised tissue applications.
△ Less
Submitted 24 August, 2013;
originally announced August 2013.
-
Photo-active collagen systems with controlled triple helix architecture
Authors:
Giuseppe Tronci,
Stephen J. Russell,
David J. Wood
Abstract:
The design of photo-active collagen systems is presented as a basis for establishing biomimetic materials with varied network architecture and programmable macroscopic properties. Following in-house isolation of type I collagen, reaction with vinyl-bearing compounds of varied backbone rigidity, i.e. 4-vinylbenzyl chloride (4VBC) and glycidyl methacrylate (GMA), was carried out. TNBS colorimetric a…
▽ More
The design of photo-active collagen systems is presented as a basis for establishing biomimetic materials with varied network architecture and programmable macroscopic properties. Following in-house isolation of type I collagen, reaction with vinyl-bearing compounds of varied backbone rigidity, i.e. 4-vinylbenzyl chloride (4VBC) and glycidyl methacrylate (GMA), was carried out. TNBS colorimetric assay, 1H-NMR and ATR-FTIR confirmed covalent and tunable functionalization of collagen lysines. Depending on the type and extent of functionalization, controlled stability and thermal denaturation of triple helices were observed via circular dichroism (CD), whereby the hydrogen-bonding capability of introduced moieties was shown to play a major role. Full gel formation was observed following photo-activation of functionalized collagen solutions. The presence of a covalent network only slightly affected collagen triple helix conformation (as observed by WAXS and ATR-FTIR), confirming the structural organization of functionalized collagen precursors. Photo-activated hydrogels demonstrated an increased denaturation temperature (DSC) with respect to native collagen, suggesting that the formation of the covalent network successfully stabilized collagen triple helices. Moreover, biocompatibility and mechanical competence of obtained hydrogels were successfully demonstrated under physiologically-relevant conditions. These results demonstrate that this novel synthetic approach enabled the formation of biocompatible collagen systems with defined network architecture and programmable macroscopic properties, which can only partially be obtained with current synthetic methods.
△ Less
Submitted 21 June, 2013; v1 submitted 17 June, 2013;
originally announced June 2013.
-
arXiv:1212.2206
[pdf]
physics.bio-ph
cond-mat.mtrl-sci
cond-mat.soft
physics.chem-ph
q-bio.BM
q-bio.TO
Structure-property-function relationships in triple helical collagen hydrogels
Authors:
Giuseppe Tronci,
Amanda Doyle,
Stephen J. Russell,
David J. Wood
Abstract:
In order to establish defined biomimetic systems, type I collagen was functionalised with 1,3-Phenylenediacetic acid (Ph) as aromatic, bifunctional segment. Following investigation on molecular organization and macroscopic properties, material functionalities, i.e. degradability and bioactivity, were addressed, aiming at elucidating the potential of this collagen system as mineralization template.…
▽ More
In order to establish defined biomimetic systems, type I collagen was functionalised with 1,3-Phenylenediacetic acid (Ph) as aromatic, bifunctional segment. Following investigation on molecular organization and macroscopic properties, material functionalities, i.e. degradability and bioactivity, were addressed, aiming at elucidating the potential of this collagen system as mineralization template. Functionalised collagen hydrogels demonstrated a preserved triple helix conformation. Decreased swelling ratio and increased thermo-mechanical properties were observed in comparison to state-of-the-art carbodiimide (EDC)-crosslinked collagen controls. Ph-crosslinked samples displayed no optical damage and only a slight mass decrease (~ 4 wt.-%) following 1-week incubation in simulated body fluid (SBF), while nearly 50 wt.-% degradation was observed in EDC-crosslinked collagen. SEM/EDS revealed amorphous mineral deposition, whereby increased calcium phosphate ratio was suggested in hydrogels with increased Ph content. This investigation provides valuable insights for the synthesis of triple helical collagen materials with enhanced macroscopic properties and controlled degradation. In light of these features, this system will be applied for the design of tissue-like scaffolds for mineralized tissue formation.
△ Less
Submitted 2 January, 2013; v1 submitted 9 December, 2012;
originally announced December 2012.
-
Radiation Testing of Electronics for the CMS Endcap Muon System
Authors:
B. Bylsma,
D. Cady,
A. Celik,
L. S. Durkin,
J. Gilmore,
J. Haley,
V. Khotilovich,
S. Lakdawala,
J. Liu,
M. Matveev,
B. P. Padley,
J. Roberts,
J. Roe,
A. Safonov,
I. Suarez,
D. Wood,
I. Zawisza
Abstract:
The electronics used in the data readout and triggering system for the Compact Muon Solenoid (CMS) experiment at the Large Hadron Collider (LHC) particle accelerator at CERN are exposed to high radiation levels. This radiation can cause permanent damage to the electronic circuitry, as well as temporary effects such as data corruption induced by Single Event Upsets. Once the High Luminosity LHC (HL…
▽ More
The electronics used in the data readout and triggering system for the Compact Muon Solenoid (CMS) experiment at the Large Hadron Collider (LHC) particle accelerator at CERN are exposed to high radiation levels. This radiation can cause permanent damage to the electronic circuitry, as well as temporary effects such as data corruption induced by Single Event Upsets. Once the High Luminosity LHC (HL-LHC) accelerator upgrades are completed it will have five times higher instantaneous luminosity than LHC, allowing for detection of rare physics processes, new particles and interactions. Tests have been performed to determine the effects of radiation on the electronic components to be used for the Endcap Muon electronics project currently being designed for installation in the CMS experiment in 2013. During these tests the digital components on the test boards were operating with active data readout while being irradiated with 55 MeV protons. In reactor tests, components were exposed to 30 years equivalent levels of neutron radiation expected at the HL-LHC. The highest total ionizing dose (TID) for the muon system is expected at the inner-most portion of the CMS detector, with 8900 rad over ten years. Our results show that Commercial Off-The-Shelf (COTS) components selected for the new electronics will operate reliably in the CMS radiation environment.
△ Less
Submitted 20 August, 2012;
originally announced August 2012.
-
Multi-Energy Radiography Against Terrorism. Theory and Experiments
Authors:
Sergei V. Naydenov,
Vladimir D. Ryzhikov,
Craig F. Smith,
Dennis Wood
Abstract:
Multi-energy radiography is a new direction in non-destructive testing. Its specific feature is separate detection of penetrating radiation in several energy channels. Multi-energy radiography allows quantitative determination of the atomic composition of objects. This is its principal advantage over conventional radiography. In particular, dual-energy radiography allows determination of the eff…
▽ More
Multi-energy radiography is a new direction in non-destructive testing. Its specific feature is separate detection of penetrating radiation in several energy channels. Multi-energy radiography allows quantitative determination of the atomic composition of objects. This is its principal advantage over conventional radiography. In particular, dual-energy radiography allows determination of the effective atomic number of a material with an accuracy of up to 80-90%. Development of three-energy radiography and radiography of higher multiplicity makes it possible to further improve the reconstruction of an objects chemical composition. This presents the possibility, for example, of detection of explosives and other illegal objects in luggage with a reliability approaching 100%. These developments can find application not only in anti-terrorist activities, but also in areas such as industrial testing and nuclear medicine.
△ Less
Submitted 21 May, 2006; v1 submitted 23 April, 2005;
originally announced April 2005.