-
Anatomy-based quality metric of diffusion-weighted MRI data for accurate derivation of muscle fiber orientation
Authors:
Nadya Shusharina,
Xiaofeng Liu,
Evangelia Kaza,
Miranda Lam,
Stephan Maier,
Jonghye Woo
Abstract:
Diffusion-weighted MRI (DW-MRI) is used to quantitatively characterize the microscopic structure of soft tissue due to the anisotropic diffusion of water in muscle. Applications such as fiber tractography or modeling of tumor spread in soft tissue require precise detection of muscle fiber orientation, which is derived from the principal eigenvector of the diffusion tensor. For clinical application…
▽ More
Diffusion-weighted MRI (DW-MRI) is used to quantitatively characterize the microscopic structure of soft tissue due to the anisotropic diffusion of water in muscle. Applications such as fiber tractography or modeling of tumor spread in soft tissue require precise detection of muscle fiber orientation, which is derived from the principal eigenvector of the diffusion tensor. For clinical applications, high image quality and high signal-to-noise ratio (SNR) of DW-MRI for fiber orientation must be balanced with an appropriate scan duration. Muscles with known structural heterogeneity, e.g. bipennate muscles such as the thigh rectus femoris, provide a natural quality benchmark to determine fiber orientation at different scan parameters. Here, we analyze DW-MR images of the thigh of a healthy volunteer at different SNRs and use PCA to identify subsets of voxels with different directions of diffusion tensor eigenvectors. We propose to use the mixing index of spatial co-localization of the clustered eigenvectors as a quality metric for fiber orientation detection. Comparing acquisitions at different SNRs, we find that high SNR results in a low mixing index, reflecting a clear separation of the two compartments of the bipennate muscle on either side of the central tendon. Because the mixing index allows joint estimation of spatial and directional noise in DW-MRI as a single parameter, it will allow future quantitative optimization of DW-MRI protocols for soft tissue.
△ Less
Submitted 5 June, 2024;
originally announced June 2024.
-
Treatment-wise Glioblastoma Survival Inference with Multi-parametric Preoperative MRI
Authors:
Xiaofeng Liu,
Nadya Shusharina,
Helen A Shih,
C. -C. Jay Kuo,
Georges El Fakhri,
Jonghye Woo
Abstract:
In this work, we aim to predict the survival time (ST) of glioblastoma (GBM) patients undergoing different treatments based on preoperative magnetic resonance (MR) scans. The personalized and precise treatment planning can be achieved by comparing the ST of different treatments. It is well established that both the current status of the patient (as represented by the MR scans) and the choice of tr…
▽ More
In this work, we aim to predict the survival time (ST) of glioblastoma (GBM) patients undergoing different treatments based on preoperative magnetic resonance (MR) scans. The personalized and precise treatment planning can be achieved by comparing the ST of different treatments. It is well established that both the current status of the patient (as represented by the MR scans) and the choice of treatment are the cause of ST. While previous related MR-based glioblastoma ST studies have focused only on the direct map** of MR scans to ST, they have not included the underlying causal relationship between treatments and ST. To address this limitation, we propose a treatment-conditioned regression model for glioblastoma ST that incorporates treatment information in addition to MR scans. Our approach allows us to effectively utilize the data from all of the treatments in a unified manner, rather than having to train separate models for each of the treatments. Furthermore, treatment can be effectively injected into each convolutional layer through the adaptive instance normalization we employ. We evaluate our framework on the BraTS20 ST prediction task. Three treatment options are considered: Gross Total Resection (GTR), Subtotal Resection (STR), and no resection. The evaluation results demonstrate the effectiveness of injecting the treatment for estimating GBM survival.
△ Less
Submitted 10 February, 2024;
originally announced February 2024.
-
Posterior Estimation for Dynamic PET imaging using Conditional Variational Inference
Authors:
Xiaofeng Liu,
Thibault Marin,
Tiss Amal,
Jonghye Woo,
Georges El Fakhri,
**song Ouyang
Abstract:
This work aims efficiently estimating the posterior distribution of kinetic parameters for dynamic positron emission tomography (PET) imaging given a measurement of time of activity curve. Considering the inherent information loss from parametric imaging to measurement space with the forward kinetic model, the inverse map** is ambiguous. The conventional (but expensive) solution can be the Marko…
▽ More
This work aims efficiently estimating the posterior distribution of kinetic parameters for dynamic positron emission tomography (PET) imaging given a measurement of time of activity curve. Considering the inherent information loss from parametric imaging to measurement space with the forward kinetic model, the inverse map** is ambiguous. The conventional (but expensive) solution can be the Markov Chain Monte Carlo (MCMC) sampling, which is known to produce unbiased asymptotical estimation. We propose a deep-learning-based framework for efficient posterior estimation. Specifically, we counteract the information loss in the forward process by introducing latent variables. Then, we use a conditional variational autoencoder (CVAE) and optimize its evidence lower bound. The well-trained decoder is able to infer the posterior with a given measurement and the sampled latent variables following a simple multivariate Gaussian distribution. We validate our CVAE-based method using unbiased MCMC as the reference for low-dimensional data (a single brain region) with the simplified reference tissue model.
△ Less
Submitted 24 October, 2023;
originally announced October 2023.
-
MomentaMorph: Unsupervised Spatial-Temporal Registration with Momenta, Shooting, and Correction
Authors:
Zhangxing Bian,
Shuwen Wei,
Yihao Liu,
Junyu Chen,
Jiachen Zhuo,
Fangxu Xing,
Jonghye Woo,
Aaron Carass,
Jerry L. Prince
Abstract:
Tagged magnetic resonance imaging (tMRI) has been employed for decades to measure the motion of tissue undergoing deformation. However, registration-based motion estimation from tMRI is difficult due to the periodic patterns in these images, particularly when the motion is large. With a larger motion the registration approach gets trapped in a local optima, leading to motion estimation errors. We…
▽ More
Tagged magnetic resonance imaging (tMRI) has been employed for decades to measure the motion of tissue undergoing deformation. However, registration-based motion estimation from tMRI is difficult due to the periodic patterns in these images, particularly when the motion is large. With a larger motion the registration approach gets trapped in a local optima, leading to motion estimation errors. We introduce a novel "momenta, shooting, and correction" framework for Lagrangian motion estimation in the presence of repetitive patterns and large motion. This framework, grounded in Lie algebra and Lie group principles, accumulates momenta in the tangent vector space and employs exponential map** in the diffeomorphic space for rapid approximation towards true optima, circumventing local optima. A subsequent correction step ensures convergence to true optima. The results on a 2D synthetic dataset and a real 3D tMRI dataset demonstrate our method's efficiency in estimating accurate, dense, and diffeomorphic 2D/3D motion fields amidst large motion and repetitive patterns.
△ Less
Submitted 5 August, 2023;
originally announced August 2023.
-
Incremental Learning for Heterogeneous Structure Segmentation in Brain Tumor MRI
Authors:
Xiaofeng Liu,
Helen A. Shih,
Fangxu Xing,
Emiliano Santarnecchi,
Georges El Fakhri,
Jonghye Woo
Abstract:
Deep learning (DL) models for segmenting various anatomical structures have achieved great success via a static DL model that is trained in a single source domain. Yet, the static DL model is likely to perform poorly in a continually evolving environment, requiring appropriate model updates. In an incremental learning setting, we would expect that well-trained static models are updated, following…
▽ More
Deep learning (DL) models for segmenting various anatomical structures have achieved great success via a static DL model that is trained in a single source domain. Yet, the static DL model is likely to perform poorly in a continually evolving environment, requiring appropriate model updates. In an incremental learning setting, we would expect that well-trained static models are updated, following continually evolving target domain data -- e.g., additional lesions or structures of interest -- collected from different sites, without catastrophic forgetting. This, however, poses challenges, due to distribution shifts, additional structures not seen during the initial model training, and the absence of training data in a source domain. To address these challenges, in this work, we seek to progressively evolve an ``off-the-shelf" trained segmentation model to diverse datasets with additional anatomical categories in a unified manner. Specifically, we first propose a divergence-aware dual-flow module with balanced rigidity and plasticity branches to decouple old and new tasks, which is guided by continuous batch renormalization. Then, a complementary pseudo-label training scheme with self-entropy regularized momentum MixUp decay is developed for adaptive network optimization. We evaluated our framework on a brain tumor segmentation task with continually changing target domains -- i.e., new MRI scanners/modalities with incremental structures. Our framework was able to well retain the discriminability of previously learned structures, hence enabling the realistic life-long segmentation model extension along with the widespread accumulation of big medical data.
△ Less
Submitted 30 May, 2023;
originally announced May 2023.
-
Attentive Continuous Generative Self-training for Unsupervised Domain Adaptive Medical Image Translation
Authors:
Xiaofeng Liu,
Jerry L. Prince,
Fangxu Xing,
Jiachen Zhuo,
Reese Timothy,
Maureen Stone,
Georges El Fakhri,
Jonghye Woo
Abstract:
Self-training is an important class of unsupervised domain adaptation (UDA) approaches that are used to mitigate the problem of domain shift, when applying knowledge learned from a labeled source domain to unlabeled and heterogeneous target domains. While self-training-based UDA has shown considerable promise on discriminative tasks, including classification and segmentation, through reliable pseu…
▽ More
Self-training is an important class of unsupervised domain adaptation (UDA) approaches that are used to mitigate the problem of domain shift, when applying knowledge learned from a labeled source domain to unlabeled and heterogeneous target domains. While self-training-based UDA has shown considerable promise on discriminative tasks, including classification and segmentation, through reliable pseudo-label filtering based on the maximum softmax probability, there is a paucity of prior work on self-training-based UDA for generative tasks, including image modality translation. To fill this gap, in this work, we seek to develop a generative self-training (GST) framework for domain adaptive image translation with continuous value prediction and regression objectives. Specifically, we quantify both aleatoric and epistemic uncertainties within our GST using variational Bayes learning to measure the reliability of synthesized data. We also introduce a self-attention scheme that de-emphasizes the background region to prevent it from dominating the training process. The adaptation is then carried out by an alternating optimization scheme with target domain supervision that focuses attention on the regions with reliable pseudo-labels. We evaluated our framework on two cross-scanner/center, inter-subject translation tasks, including tagged-to-cine magnetic resonance (MR) image translation and T1-weighted MR-to-fractional anisotropy translation. Extensive validations with unpaired target domain data showed that our GST yielded superior synthesis performance in comparison to adversarial training UDA methods.
△ Less
Submitted 23 May, 2023;
originally announced May 2023.
-
Diffusion-based Generative AI for Exploring Transition States from 2D Molecular Graphs
Authors:
Seonghwan Kim,
Jeheon Woo,
Woo Youn Kim
Abstract:
The exploration of transition state (TS) geometries is crucial for elucidating chemical reaction mechanisms and modeling their kinetics. Recently, machine learning (ML) models have shown remarkable performance for prediction of TS geometries. However, they require 3D conformations of reactants and products often with their appropriate orientations as input, which demands substantial efforts and co…
▽ More
The exploration of transition state (TS) geometries is crucial for elucidating chemical reaction mechanisms and modeling their kinetics. Recently, machine learning (ML) models have shown remarkable performance for prediction of TS geometries. However, they require 3D conformations of reactants and products often with their appropriate orientations as input, which demands substantial efforts and computational cost. Here, we propose a generative approach based on the stochastic diffusion method, namely TSDiff, for prediction of TS geometries just from 2D molecular graphs. TSDiff outperformed the existing ML models with 3D geometries in terms of both accuracy and efficiency. Moreover, it enables to sample various TS conformations, because it learned the distribution of TS geometries for diverse reactions in training. Thus, TSDiff was able to find more favorable reaction pathways with lower barrier heights than those in the reference database. These results demonstrate that TSDiff shows promising potential for an efficient and reliable TS exploration.
△ Less
Submitted 12 October, 2023; v1 submitted 20 April, 2023;
originally announced April 2023.
-
GeoTMI:Predicting quantum chemical property with easy-to-obtain geometry via positional denoising
Authors:
Hyeonsu Kim,
Jeheon Woo,
Seonghwan Kim,
Seokhyun Moon,
Jun Hyeong Kim,
Woo Youn Kim
Abstract:
As quantum chemical properties have a dependence on their geometries, graph neural networks (GNNs) using 3D geometric information have achieved high prediction accuracy in many tasks. However, they often require 3D geometries obtained from high-level quantum mechanical calculations, which are practically infeasible, limiting their applicability to real-world problems. To tackle this, we propose a…
▽ More
As quantum chemical properties have a dependence on their geometries, graph neural networks (GNNs) using 3D geometric information have achieved high prediction accuracy in many tasks. However, they often require 3D geometries obtained from high-level quantum mechanical calculations, which are practically infeasible, limiting their applicability to real-world problems. To tackle this, we propose a new training framework, GeoTMI, that employs denoising process to predict properties accurately using easy-to-obtain geometries (corrupted versions of correct geometries, such as those obtained from low-level calculations). Our starting point was the idea that the correct geometry is the best description of the target property. Hence, to incorporate information of the correct, GeoTMI aims to maximize mutual information between three variables: the correct and the corrupted geometries and the property. GeoTMI also explicitly updates the corrupted input to approach the correct geometry as it passes through the GNN layers, contributing to more effective denoising. We investigated the performance of the proposed method using 3D GNNs for three prediction tasks: molecular properties, a chemical reaction property, and relaxed energy in a heterogeneous catalytic system. Our results showed consistent improvements in accuracy across various tasks, demonstrating the effectiveness and robustness of GeoTMI.
△ Less
Submitted 14 December, 2023; v1 submitted 28 March, 2023;
originally announced April 2023.
-
Posterior Estimation Using Deep Learning: A Simulation Study of Compartmental Modeling in Dynamic PET
Authors:
Xiaofeng Liu,
Thibault Marin,
Tiss Amal,
Jonghye Woo,
Georges El Fakhri,
**song Ouyang
Abstract:
Background: In medical imaging, images are usually treated as deterministic, while their uncertainties are largely underexplored. Purpose: This work aims at using deep learning to efficiently estimate posterior distributions of imaging parameters, which in turn can be used to derive the most probable parameters as well as their uncertainties. Methods: Our deep learning-based approaches are based o…
▽ More
Background: In medical imaging, images are usually treated as deterministic, while their uncertainties are largely underexplored. Purpose: This work aims at using deep learning to efficiently estimate posterior distributions of imaging parameters, which in turn can be used to derive the most probable parameters as well as their uncertainties. Methods: Our deep learning-based approaches are based on a variational Bayesian inference framework, which is implemented using two different deep neural networks based on conditional variational auto-encoder (CVAE), CVAE-dual-encoder and CVAE-dual-decoder. The conventional CVAE framework, i.e., CVAE-vanilla, can be regarded as a simplified case of these two neural networks. We applied these approaches to a simulation study of dynamic brain PET imaging using a reference region-based kinetic model. Results: In the simulation study, we estimated posterior distributions of PET kinetic parameters given a measurement of time-activity curve. Our proposed CVAE-dual-encoder and CVAE-dual-decoder yield results that are in good agreement with the asymptotically unbiased posterior distributions sampled by Markov Chain Monte Carlo (MCMC). The CVAE-vanilla can also be used for estimating posterior distributions, although it has an inferior performance to both CVAE-dual-encoder and CVAE-dual-decoder. Conclusions: We have evaluated the performance of our deep learning approaches for estimating posterior distributions in dynamic brain PET. Our deep learning approaches yield posterior distributions, which are in good agreement with unbiased distributions estimated by MCMC. All these neural networks have different characteristics and can be chosen by the user for specific applications. The proposed methods are general and can be adapted to other problems.
△ Less
Submitted 17 March, 2023;
originally announced March 2023.
-
Coarse particulate matter air quality in East Asia: implications for fine particulate nitrate
Authors:
Shixian Zhai,
Daniel J. Jacob,
Drew C. Pendergrass,
Nadia K. Colombi,
Viral Shah,
Laura Hyesung Yang,
Qiang Zhang,
Shuxiao Wang,
Hwa** Kim,
Yele Sun,
**-Soo Choi,
**-Soo Park,
Gan Luo,
Fangqun Yu,
Jung-Hun Woo,
Younha Kim,
Jack E. Dibb,
Taehyoung Lee,
**-Seok Han,
Bruce E. Anderson,
Ke Li,
Hong Liao
Abstract:
Coarse particulate matter (PM) is a serious air pollution problem in East Asia. Analysis of air quality network observations in the North China Plain and the Seoul Metropolitan Area shows that it is mainly anthropogenic and has decreased by 21% over 2015-2019. This anthropogenic coarse PM is generally not included in air quality models but scavenges nitric acid to suppress the formation of fine pa…
▽ More
Coarse particulate matter (PM) is a serious air pollution problem in East Asia. Analysis of air quality network observations in the North China Plain and the Seoul Metropolitan Area shows that it is mainly anthropogenic and has decreased by 21% over 2015-2019. This anthropogenic coarse PM is generally not included in air quality models but scavenges nitric acid to suppress the formation of fine particulate (PM2.5) nitrate, a major contributor to PM2.5 pollution. Including it in the GEOS-Chem model decreases simulated PM2.5 nitrate to improve agreement with observations. Decreasing anthropogenic coarse PM over 2015-2019 directly increases PM2.5 nitrate in summer, offsetting the effect of other emission controls, while in winter it increases the sensitivity of PM2.5 nitrate to ammonia and sulfur dioxide emissions. Our work implies the need for stronger ammonia and nitrogen oxides emission controls to improve PM2.5 air quality as coarse PM continues to decrease.
△ Less
Submitted 21 December, 2022; v1 submitted 7 July, 2022;
originally announced July 2022.
-
Feasibility study of clinical target volume definition for soft-tissue sarcoma using muscle fiber orientations derived from diffusion tensor imaging
Authors:
Nadya Shusharina,
Xiaofeng Liu,
Jaume Coll-Font,
Anna Foster,
Georges El Fakhri,
Jonghye Woo,
Thomas Bortfeld,
Christopher Nguyen
Abstract:
Objective: Soft-tissue sarcoma spreads preferentially along muscle fibers. We explore the utility of deriving muscle fiber orientations from diffusion tensor MRI (DT-MRI) for defining the boundary of the clinical target volume in muscle tissue. Approach: We recruited eight healthy volunteers to acquire MR images of the left and right thigh. The imaging session consisted of (a) two MRI spin-echo-ba…
▽ More
Objective: Soft-tissue sarcoma spreads preferentially along muscle fibers. We explore the utility of deriving muscle fiber orientations from diffusion tensor MRI (DT-MRI) for defining the boundary of the clinical target volume in muscle tissue. Approach: We recruited eight healthy volunteers to acquire MR images of the left and right thigh. The imaging session consisted of (a) two MRI spin-echo-based scans, T1- and T2-weighted; (b) a diffusion weighted (DW) spin-echo-based scan using an echo planar acquisition with fat suppression. The thigh muscles were auto-segmented using CNN. DT-MRI data was used as a geometry encoding input to solve the anisotropic Eikonal equation with Hamiltonian Fast-Marching method. The isosurfaces of the solution modeled the CTV boundary. Main results: The auto-segmented muscles of the thigh agreed with manually delineated with the Dice score ranging from 0.8 to 0.94 for different muscles. Anisotropy of the isosurfaces was compared across muscles with different anatomical orientations within a thigh, between muscles in left and right thighs of each subject, and between different subjects. Analysis showed a high degree of consistency across all comparisons. The distance from the GTV to the isosurface and the eigenvalues ratio are two controlling parameters for the extent and shape of the CTV. Significance: Our feasibility study with healthy volunteers shows the promise of using muscle fiber orientations derived from diffusion weighted MRI data for automated generation of anisotropic CTV boundary in soft tissue sarcoma. Our contribution is significant as it is expected to lead to the improvements in the treatment outcomes of soft-tissue sarcoma patients undergoing radiotherapy and decrease amputation rate for a subset of patients. We expect such improvements to have a strong positive impact for the cancer centers with small volume of sarcoma patients.
△ Less
Submitted 20 June, 2022;
originally announced June 2022.
-
LA City Bike Lane Infrastructure and its Effects on Business Closures From 2016-2021
Authors:
Jeff Block,
Yocelyne Gomez,
Carolina Gonzalez,
Miguel Magana,
Marco Rodas,
Academic Advisor,
Mentor,
Dr. Jongwook Woo
Abstract:
This paper analyzes the presence of bike lanes within the city of Los Angeles and how their presence could offer positive economic benefits to businesses. City wide shutdowns initiated in March of 2020 acted as a demand shock to local businesses. Over the next two years, businesses struggled to keep the doors open. We explored the possibility of bicycle infrastructure playing a role in supporting/…
▽ More
This paper analyzes the presence of bike lanes within the city of Los Angeles and how their presence could offer positive economic benefits to businesses. City wide shutdowns initiated in March of 2020 acted as a demand shock to local businesses. Over the next two years, businesses struggled to keep the doors open. We explored the possibility of bicycle infrastructure playing a role in supporting/insulating local businesses from closure and positive economic impacts. Our analysis shows that the businesses along bike lane in Los Angeles runs positively, and that COVID-19 is not related to, significantly.
△ Less
Submitted 27 April, 2022;
originally announced May 2022.
-
Deep learning-based GTV contouring modeling inter- and intra- observer variability in sarcomas
Authors:
Thibault Marin,
Yue Zhuo,
Rita Maria Lahoud,
Fei Tian,
Xiaoyue Ma,
Fangxu Xing,
Maryam Moteabbed,
Xiaofeng Liu,
Kira Grogg,
Nadya Shusharina,
Jonghye Woo,
Chao Ma,
Yen-Lin E. Chen,
Georges El Fakhri
Abstract:
Background and purpose: The delineation of the gross tumor volume (GTV) is a critical step for radiation therapy treatment planning. The delineation procedure is typically performed manually which exposes two major issues: cost and reproducibility. Delineation is a time-consuming process that is subject to inter- and intra-observer variability. While methods have been proposed to predict GTV conto…
▽ More
Background and purpose: The delineation of the gross tumor volume (GTV) is a critical step for radiation therapy treatment planning. The delineation procedure is typically performed manually which exposes two major issues: cost and reproducibility. Delineation is a time-consuming process that is subject to inter- and intra-observer variability. While methods have been proposed to predict GTV contours, typical approaches ignore variability and therefore fail to utilize the valuable confidence information offered by multiple contours. Materials and methods: In this work we propose an automatic GTV contouring method for soft-tissue sarcomas from X-ray computed tomography (CT) images, using deep learning by integrating inter- and intra-observer variability in the learned model. Sixty-eight patients with soft tissue and bone sarcomas were considered in this evaluation, all underwent pre-operative CT imaging used to perform GTV delineation. Four radiation oncologists and radiologists performed three contouring trials each for all patients. We quantify variability by defining confidence levels based on the frequency of inclusion of a given voxel into the GTV and use a deep convolutional neural network to learn GTV confidence maps. Results: Results were compared to confidence maps from the four readers as well as ground-truth consensus contours established jointly by all readers. The resulting continuous Dice score between predicted and true confidence maps was 87% and the Hausdorff distance was 14 mm. Conclusion: Results demonstrate the ability of the proposed method to predict accurate contours while utilizing variability and as such it can be used to improve clinical workflow.
△ Less
Submitted 10 October, 2021;
originally announced October 2021.
-
Tip-induced strain, bandgap, and radiative decay engineering of a single metal halide perovskite quantum dot
Authors:
Hyeongwoo Lee,
Ju Young Woo,
Dae Young Park,
Inho Jo,
Jusun Park,
Yeunhee Lee,
Yeonjeong Koo,
**seong Choi,
Hyojung Kim,
Yong-Hyun Kim,
Mun Seok Jeong,
Sohee Jeong,
Kyoung-Duck Park
Abstract:
Strain engineering of perovskite quantum dots (pQDs) enables widely-tunable photonic device applications. However, manipulation at the single-emitter level has never been attempted. Here, we present a tip-induced control approach combined with tip-enhanced photoluminescence (TEPL) spectroscopy to engineer strain, bandgap, and emission quantum yield of a single pQD. Single CsPbBr$_{x}$I$_{3-x}$ pQD…
▽ More
Strain engineering of perovskite quantum dots (pQDs) enables widely-tunable photonic device applications. However, manipulation at the single-emitter level has never been attempted. Here, we present a tip-induced control approach combined with tip-enhanced photoluminescence (TEPL) spectroscopy to engineer strain, bandgap, and emission quantum yield of a single pQD. Single CsPbBr$_{x}$I$_{3-x}$ pQDs are clearly resolved through hyperspectral TEPL imaging with $\sim$10 nm spatial resolution. The plasmonic tip then directly applies pressure to a single pQD to facilitate a bandgap shift up to $\sim$62 meV with Purcell-enhanced PL quantum yield as high as $\sim$10$^5$ for the strain-induced pQD. Furthermore, by systematically modulating the tip-induced compressive strain of a single pQD, we achieve dynamical bandgap engineering in a reversible manner. In addition, we facilitate the quantum dot coupling for a pQD ensemble with $\sim$0.8 GPa tip pressure at the nanoscale. Our approach presents a new strategy to tune the nano-opto-electro-mechanical properties of pQDs at the single-crystal level.
△ Less
Submitted 3 February, 2021;
originally announced February 2021.
-
Optical Forces in Coupled Chiral Particles
Authors:
Kah Jen Wo,
Jie Peng,
Madhava Krishna Prasad,
Yuzhi Shi,
Jensen Li,
Shubo Wang
Abstract:
Structural chirality can induce counter-intuitive optical forces due to inherent symmetry properties. While optical forces on a single chiral particle in the Rayleigh regime have been well studied, optical forces in coupled chiral particles remain less explored. By using full-wave numerical simulations and analytical methods of source representation and coupled mode theory, we investigated the opt…
▽ More
Structural chirality can induce counter-intuitive optical forces due to inherent symmetry properties. While optical forces on a single chiral particle in the Rayleigh regime have been well studied, optical forces in coupled chiral particles remain less explored. By using full-wave numerical simulations and analytical methods of source representation and coupled mode theory, we investigated the optical forces induced by a plane wave on two chiral particles coupling with each other via the evanescent near fields. We found that the induced electric and magnetic dipoles of the chiral particles have complicated couplings that give rise to dark and bright modes. The interaction force between the particles can be either attractive or repulsive, and its magnitude can be significantly enhanced by the resonance modes. The attractive force is much stronger if two particles are of opposite handedness compared with the case of same handedness. The electric dipole force and the magnetic dipole force have the same sign for two particles with the same handedness, while they are of different signs for two particles with opposite handedness. The results can lead to a better understanding of chirality-induced optical forces with potential applications in optical manipulations and chiral light-matter interactions.
△ Less
Submitted 24 July, 2020;
originally announced July 2020.
-
SND@LHC
Authors:
SHiP Collaboration,
C. Ahdida,
A. Akmete,
R. Albanese,
A. Alexandrov,
M. Andreini,
A. Anokhina,
S. Aoki,
G. Arduini,
E. Atkin,
N. Azorskiy,
J. J. Back,
A. Bagulya,
F. Baaltasar Dos Santos,
A. Baranov,
F. Bardou,
G. J. Barker,
M. Battistin,
J. Bauche,
A. Bay,
V. Bayliss,
G. Bencivenni,
A. Y. Berdnikov,
Y. A. Berdnikov,
M. Bertani
, et al. (319 additional authors not shown)
Abstract:
We propose to build and operate a detector that, for the first time, will measure the process $pp\toνX$ at the LHC and search for feebly interacting particles (FIPs) in an unexplored domain. The TI18 tunnel has been identified as a suitable site to perform these measurements due to very low machine-induced background. The detector will be off-axis with respect to the ATLAS interaction point (IP1)…
▽ More
We propose to build and operate a detector that, for the first time, will measure the process $pp\toνX$ at the LHC and search for feebly interacting particles (FIPs) in an unexplored domain. The TI18 tunnel has been identified as a suitable site to perform these measurements due to very low machine-induced background. The detector will be off-axis with respect to the ATLAS interaction point (IP1) and, given the pseudo-rapidity range accessible, the corresponding neutrinos will mostly come from charm decays: the proposed experiment will thus make the first test of the heavy flavour production in a pseudo-rapidity range that is not accessible by the current LHC detectors. In order to efficiently reconstruct neutrino interactions and identify their flavour, the detector will combine in the target region nuclear emulsion technology with scintillating fibre tracking layers and it will adopt a muon identification system based on scintillating bars that will also play the role of a hadronic calorimeter. The time of flight measurement will be achieved thanks to a dedicated timing detector. The detector will be a small-scale prototype of the scattering and neutrino detector (SND) of the SHiP experiment: the operation of this detector will provide an important test of the neutrino reconstruction in a high occupancy environment.
△ Less
Submitted 20 February, 2020;
originally announced February 2020.
-
Forecasting the value of battery electric vehicles compared to internal combustion engine vehicles: the influence of driving range and battery technology
Authors:
JongRoul Woo,
Christopher L. Magee
Abstract:
Battery electric vehicles (BEVs) are now clearly a promising candidate in addressing the environmental problems associated with conventional internal combustion engine vehicles (ICEVs). However, BEVs, unlike ICEVs, are still not widely accepted in the automobile market but continuing technological change could overcome this barrier. The aim of this study is to assess and forecast whether and when…
▽ More
Battery electric vehicles (BEVs) are now clearly a promising candidate in addressing the environmental problems associated with conventional internal combustion engine vehicles (ICEVs). However, BEVs, unlike ICEVs, are still not widely accepted in the automobile market but continuing technological change could overcome this barrier. The aim of this study is to assess and forecast whether and when design changes and technological improvements related to major challenges in driving range and battery cost will make the user value of BEVs greater than the user value of ICEVs. Specifically, we estimate the relative user value of BEVs and ICEVs resulting after design modifications to achieve different driving ranges by considering the engineering trade-offs based on a vehicle simulation. Then, we analyze when the relative user value of BEVs is expected to exceed ICEVs as the energy density and cost of batteries improve because of ongoing technological change. Our analysis demonstrates that the relative value of BEVs is lower than that of ICEVs because BEVs have high battery cost and high cost of time spent recharging despite high torque, high fuel efficiency, and low fuel cost. Moreover, we found the relative value differences between BEVs and ICEVs are found to be less in high performance large cars than in low performance compact cars because BEVs can achieve high acceleration performance more easily than ICEVs. In addition, this study predicts that in approximately 2050, high performance large BEVs could have higher relative value than high performance large ICEVs because of technological improvements in batteries; however low performance compact BEVs are still very likely to have significantly lower user value than comparable ICEVs until well beyond 2050.
△ Less
Submitted 31 May, 2018;
originally announced June 2018.
-
Exploring the relationship between technological improvement and innovation diffusion: An empirical test
Authors:
JongRoul Woo,
Christopher L. Magee
Abstract:
Different technological domains have significantly different rates of performance improvement. Prior theory indicates that such differing rates should influence the relative speed of diffusion of the products embodying the different technologies since improvement in performance during the diffusion process increases the desirability of the product diffusing. However, there has not been a broad emp…
▽ More
Different technological domains have significantly different rates of performance improvement. Prior theory indicates that such differing rates should influence the relative speed of diffusion of the products embodying the different technologies since improvement in performance during the diffusion process increases the desirability of the product diffusing. However, there has not been a broad empirical attempt to examine this effect and to clarify the underlying cause. Therefore, this paper reviews the theoretical basis and focuses upon empirical tests of this effect across multiple products and their underlying technologies. The results for 18 different diffusing products show the expected relationship-faster diffusion for products based on more rapidly improving technological domains- between technological improvement and diffusion with strong statistical significance. The empirical examination also demonstrates that technological improvement does not slow down in the latter parts of diffusion when penetration does slow down. This finding indicates that diffusion slow down in the latter stages is due to market saturation effects and is not due to slowdown of performance improvement.
△ Less
Submitted 31 May, 2018; v1 submitted 11 April, 2017;
originally announced April 2017.
-
The active muon shield in the SHiP experiment
Authors:
SHiP collaboration,
A. Akmete,
A. Alexandrov,
A. Anokhina,
S. Aoki,
E. Atkin,
N. Azorskiy,
J. J. Back,
A. Bagulya,
A. Baranov,
G. J. Barker,
A. Bay,
V. Bayliss,
G. Bencivenni,
A. Y. Berdnikov,
Y. A. Berdnikov,
M. Bertani,
C. Betancourt,
I. Bezshyiko,
O. Bezshyyko,
D. Bick,
S. Bieschke,
A. Blanco,
J. Boehm,
M. Bogomilov
, et al. (207 additional authors not shown)
Abstract:
The SHiP experiment is designed to search for very weakly interacting particles beyond the Standard Model which are produced in a 400 GeV/c proton beam dump at the CERN SPS. An essential task for the experiment is to keep the Standard Model background level to less than 0.1 event after $2\times 10^{20}$ protons on target. In the beam dump, around $10^{11}$ muons will be produced per second. The mu…
▽ More
The SHiP experiment is designed to search for very weakly interacting particles beyond the Standard Model which are produced in a 400 GeV/c proton beam dump at the CERN SPS. An essential task for the experiment is to keep the Standard Model background level to less than 0.1 event after $2\times 10^{20}$ protons on target. In the beam dump, around $10^{11}$ muons will be produced per second. The muon rate in the spectrometer has to be reduced by at least four orders of magnitude to avoid muon-induced combinatorial background. A novel active muon shield is used to magnetically deflect the muons out of the acceptance of the spectrometer. This paper describes the basic principle of such a shield, its optimization and its performance.
△ Less
Submitted 18 May, 2017; v1 submitted 10 March, 2017;
originally announced March 2017.
-
Long-lived neutral-kaon flux measurement for the KOTO experiment
Authors:
T. Masuda,
J. K. Ahn,
S. Banno,
M. Campbell,
J. Comfort,
Y. T. Duh,
T. Hineno,
Y. B. Hsiung,
T. Inagaki,
E. Iwai,
N. Kawasaki,
E. J. Kim,
Y. J. Kim,
J. W. Ko,
T. K. Komatsubara,
A. S. Kurilin,
G. H. Lee,
J. W. Lee,
S. K. Lee,
G. Y. Lim,
J. Ma,
D. MacFarland,
Y. Maeda,
T. Matsumura,
R. Murayama
, et al. (32 additional authors not shown)
Abstract:
The KOTO ($K^0$ at Tokai) experiment aims to observe the CP-violating rare decay $K_L \rightarrow π^0 ν\barν$ by using a long-lived neutral-kaon beam produced by the 30 GeV proton beam at the Japan Proton Accelerator Research Complex. The $K_L$ flux is an essential parameter for the measurement of the branching fraction. Three $K_L$ neutral decay modes, $K_L \rightarrow 3π^0$,…
▽ More
The KOTO ($K^0$ at Tokai) experiment aims to observe the CP-violating rare decay $K_L \rightarrow π^0 ν\barν$ by using a long-lived neutral-kaon beam produced by the 30 GeV proton beam at the Japan Proton Accelerator Research Complex. The $K_L$ flux is an essential parameter for the measurement of the branching fraction. Three $K_L$ neutral decay modes, $K_L \rightarrow 3π^0$, $K_L \rightarrow 2π^0$, and $K_L \rightarrow 2γ$ were used to measure the $K_L$ flux in the beam line in the 2013 KOTO engineering run. A Monte Carlo simulation was used to estimate the detector acceptance for these decays. Agreement was found between the simulation model and the experimental data, and the remaining systematic uncertainty was estimated at the 1.4\% level. The $K_L$ flux was measured as $(4.183 \pm 0.017_{\mathrm{stat.}} \pm 0.059_{\mathrm{sys.}}) \times 10^7$ $K_L$ per $2\times 10^{14}$ protons on a 66-mm-long Au target.
△ Less
Submitted 7 January, 2016; v1 submitted 11 September, 2015;
originally announced September 2015.
-
Mathematical modeling of mechanical vibration assisted conductivity imaging
Authors:
Habib Ammari,
Eunjung Lee,
Hyeuknam Kwon,
** Keun Seo,
Eung Je Woo
Abstract:
This paper aims at mathematically modeling a new multi-physics conductivity imaging system incorporating mechanical vibrations simultaneously applied to an imaging object together with current injections. We perturb the internal conductivity distribution by applying time-harmonic mechanical vibrations on the boundary. This enhances the effects of any conductivity discontinuity on the induced inter…
▽ More
This paper aims at mathematically modeling a new multi-physics conductivity imaging system incorporating mechanical vibrations simultaneously applied to an imaging object together with current injections. We perturb the internal conductivity distribution by applying time-harmonic mechanical vibrations on the boundary. This enhances the effects of any conductivity discontinuity on the induced internal current density distribution. Unlike other conductivity contrast enhancing frameworks, it does not require a prior knowledge of a reference data. In this paper, we provide a mathematical framework for this novel imaging modality. As an application of the vibration-assisted impedance imaging framework, we propose a new breast image reconstruction method in electrical impedance tomography (EIT). As its another application, we investigate a conductivity anomaly detection problem and provide an efficient location search algorithm. We show both analytically and numerically that the applied mechanical vibration increases the data sensitivity to the conductivity contrast and enhances the quality of reconstructed images and anomaly detection results. For numerous applications in impedance imaging, the proposed multi-physics method opens a new difference imaging area called the vibration-difference imaging, which can augment the time-difference and also frequency-difference imaging methods for sensitivity improvements.
△ Less
Submitted 14 May, 2014;
originally announced May 2014.
-
Double Fano resonances in a composite metamaterial possessing tripod plasmonic resonances
Authors:
Y. U. Lee,
E. Y. Choi,
E. S. Kim,
J. H. Woo,
B. Kang,
J. Kim,
Byung Cheol Park,
T. Y. Hong,
Jae Hoon Kim,
J. W. Wu
Abstract:
By embedding four-rod resonators inside double-split ring resonators superlattice, a planar composite metamaterial possessing tripod plasmonic resonances is fabricated. Double Fano resonances are observed where a common subradiant driven oscillator is coupled with two superradiant oscillators. As a classical analogue of four-level tripod atomic system, the transmission spectrum of the composite me…
▽ More
By embedding four-rod resonators inside double-split ring resonators superlattice, a planar composite metamaterial possessing tripod plasmonic resonances is fabricated. Double Fano resonances are observed where a common subradiant driven oscillator is coupled with two superradiant oscillators. As a classical analogue of four-level tripod atomic system, the transmission spectrum of the composite metamaterial exhibits a double Fano-based coherent effect. Transfer of absorbed power between two superradiant oscillators is controlled by manipulating two coupling strengths conjugated through the polarization angle of a normally incident electromagnetic wave.
△ Less
Submitted 27 October, 2014; v1 submitted 24 September, 2013;
originally announced September 2013.
-
Vortex Dynamics in an Annular Bose-Einstein Condensate
Authors:
S. J. Woo,
Young-Woo Son
Abstract:
We theoretically show that the topology of a non-simply-connected annular atomic Bose-Einstein condensate enforces the inner surface waves to be always excited with outer surface excitations and that the inner surface modes are associated with induced vortex dipoles unlike the surface waves of a simply-connected one with vortex monopoles. Consequently, under stirring to drive an inner surface wave…
▽ More
We theoretically show that the topology of a non-simply-connected annular atomic Bose-Einstein condensate enforces the inner surface waves to be always excited with outer surface excitations and that the inner surface modes are associated with induced vortex dipoles unlike the surface waves of a simply-connected one with vortex monopoles. Consequently, under stirring to drive an inner surface wave, a peculiar population oscillation between the inner and outer surface is generated regardless of annulus thickness. Moreover, a new vortex nucleation process by stirring is observed that can merge the inner vortex dipoles and outer vortex into a single vortex inside the annulus. The energy spectrum for a rotating annular condensate with a vortex at the center also reveals the distinct connection of the Tkachenko modes of a vortex lattice to its inner surface excitations.
△ Less
Submitted 25 July, 2012; v1 submitted 25 June, 2012;
originally announced June 2012.
-
Community detection using spectral clustering on sparse geosocial data
Authors:
Yves van Gennip,
Blake Hunter,
Raymond Ahn,
Peter Elliott,
Kyle Luh,
Megan Halvorson,
Shannon Reid,
Matt Valasik,
James Wo,
George E. Tita,
Andrea L. Bertozzi,
P. Jeffrey Brantingham
Abstract:
In this article we identify social communities among gang members in the Hollenbeck policing district in Los Angeles, based on sparse observations of a combination of social interactions and geographic locations of the individuals. This information, coming from LAPD Field Interview cards, is used to construct a similarity graph for the individuals. We use spectral clustering to identify clusters i…
▽ More
In this article we identify social communities among gang members in the Hollenbeck policing district in Los Angeles, based on sparse observations of a combination of social interactions and geographic locations of the individuals. This information, coming from LAPD Field Interview cards, is used to construct a similarity graph for the individuals. We use spectral clustering to identify clusters in the graph, corresponding to communities in Hollenbeck, and compare these with the LAPD's knowledge of the individuals' gang membership. We discuss different ways of encoding the geosocial information using a graph structure and the influence on the resulting clusterings. Finally we analyze the robustness of this technique with respect to noisy and incomplete data, thereby providing suggestions about the relative importance of quantity versus quality of collected data.
△ Less
Submitted 8 November, 2012; v1 submitted 21 June, 2012;
originally announced June 2012.
-
The Mass of the Black Hole in Arp 151 from Bayesian Modeling of Reverberation Map** Data
Authors:
Brendon J. Brewer,
Tommaso Treu,
Anna Pancoast,
Aaron J. Barth,
Vardha N. Bennert,
Misty C. Bentz,
Alexei V. Filippenko,
Jenny E. Greene,
Matthew A. Malkan,
Jong-Hak Woo
Abstract:
Supermassive black holes are believed to be ubiquitous at the centers of galaxies. Measuring their masses is extremely challenging yet essential for understanding their role in the formation and evolution of cosmic structure. We present a direct measurement of the mass of a black hole in an active galactic nucleus (Arp 151) based on the motion of the gas responsible for the broad emission lines. B…
▽ More
Supermassive black holes are believed to be ubiquitous at the centers of galaxies. Measuring their masses is extremely challenging yet essential for understanding their role in the formation and evolution of cosmic structure. We present a direct measurement of the mass of a black hole in an active galactic nucleus (Arp 151) based on the motion of the gas responsible for the broad emission lines. By analyzing and modeling spectroscopic and photometric time series, we find that the gas is well described by a disk or torus with an average radius of 3.99 +- 1.25 light days and an opening angle of 68.9 (+21.4, -17.2) degrees, viewed at an inclination angle of 67.8 +- 7.8 degrees (that is, closer to face-on than edge-on). The black hole mass is inferred to be 10^(6.51 +- 0.28) solar masses. The method is fully general and can be used to determine the masses of black holes at arbitrary distances, enabling studies of their evolution over cosmic time.
△ Less
Submitted 25 April, 2011;
originally announced April 2011.
-
The G0 Experiment: Apparatus for Parity-Violating Electron Scattering Measurements at Forward and Backward Angles
Authors:
G0 Collaboration,
D. Androic,
D. S. Armstrong,
J. Arvieux,
R. Asaturyan,
T. D. Averett,
S. L. Bailey,
G. Batigne,
D. H. Beck,
E. J. Beise,
J. Benesch,
F. Benmokhtar,
L. Bimbot,
J. Birchall,
A. Biselli,
P. Bosted,
H. Breuer,
P. Brindza,
C. L. Capuano,
R. D. Carlini,
R. Carr,
N. Chant,
Y. -C. Chao,
R. Clark,
A. Coppens
, et al. (105 additional authors not shown)
Abstract:
In the G0 experiment, performed at Jefferson Lab, the parity-violating elastic scattering of electrons from protons and quasi-elastic scattering from deuterons is measured in order to determine the neutral weak currents of the nucleon. Asymmetries as small as 1 part per million in the scattering of a polarized electron beam are determined using a dedicated apparatus. It consists of specialized bea…
▽ More
In the G0 experiment, performed at Jefferson Lab, the parity-violating elastic scattering of electrons from protons and quasi-elastic scattering from deuterons is measured in order to determine the neutral weak currents of the nucleon. Asymmetries as small as 1 part per million in the scattering of a polarized electron beam are determined using a dedicated apparatus. It consists of specialized beam-monitoring and control systems, a cryogenic hydrogen (or deuterium) target, and a superconducting, toroidal magnetic spectrometer equipped with plastic scintillation and aerogel Cerenkov detectors, as well as fast readout electronics for the measurement of individual events. The overall design and performance of this experimental system is discussed.
△ Less
Submitted 3 March, 2011;
originally announced March 2011.
-
Near-field spectroscopy of bimodal size distribution of InAs/AlGaAs quantum dots
Authors:
Young-Jun Yu,
I. T. Jeong,
J. C. Woo,
Wonho Jhe
Abstract:
We report on high-resolution photoluminescence (PL) spectroscopy of spatial structure of InAs/AlGaAs quantum dots (QDs) by using a near-field scanning optical microscope (NSOM). The double-peaked distribution of PL spectra is clearly observed, which is associated with the bimodal size distribution of single QDs. In particular, the size difference of single QDs, represented by the doublet spectra…
▽ More
We report on high-resolution photoluminescence (PL) spectroscopy of spatial structure of InAs/AlGaAs quantum dots (QDs) by using a near-field scanning optical microscope (NSOM). The double-peaked distribution of PL spectra is clearly observed, which is associated with the bimodal size distribution of single QDs. In particular, the size difference of single QDs, represented by the doublet spectral distribution, can be directly observed by the NSOM images of PL.
△ Less
Submitted 19 June, 2005; v1 submitted 5 April, 2005;
originally announced April 2005.
-
Near-field photoluminescence study of InAs/AlGaAs quantum-dot-based nanoclusters: band filling effect
Authors:
Young-Jun Yu,
Han-Eol Noh,
Mun-Heon Hong,
I. T. Jeong,
J. C. Woo,
Yeonsang Park,
Heonsu Jeon,
Wonho Jhe
Abstract:
We have performed near-field spectroscopy and microscopy of the InAs/AlGaAs quantum-dot-based nanoclusters. It is observed that the photoluminescence spectra of spatially confined excitons in the nanoclusters is blue-shifted up to 20 meV as the power density is increased. In particular, the near-field photoluminescence images have shown that excitons became spatially confined gradually from lowe…
▽ More
We have performed near-field spectroscopy and microscopy of the InAs/AlGaAs quantum-dot-based nanoclusters. It is observed that the photoluminescence spectra of spatially confined excitons in the nanoclusters is blue-shifted up to 20 meV as the power density is increased. In particular, the near-field photoluminescence images have shown that excitons became spatially confined gradually from lower energy state (1.4150 eV) to higher energy state (1.4392 eV) as the excitation power is increased, which is indicative of the band-filling effect of semiconductor nanostructures.
△ Less
Submitted 16 April, 2005; v1 submitted 28 March, 2005;
originally announced March 2005.